FC&A October 2013 by Red Hut Media Ltd

October 13 Issue 44

www.fca-magazine.com

Design & Desire City library provides urban narrative for community

Water Management Green technology steals the show at Hackney Theatre

Greenhouse A unique woodland college building fuels eco-learning

Online Enquiry 001

DURABLE CONCRETE POLISHING Our processes:

INDUSTRIAL FINISH A low-gloss finish customised for industrial floors. Primarily an indoor application targeting large areas such as warehouses and department stores where flooring functionality is of primary concern.

COMMERCIAL FINISH A medium-gloss finish for semi-exposed and lowexposed floors. An indoor application aimed for retail areas, shop fronts and public spaces.

HiPERFLOOR™ is a complete concrete surface finishing system and Husqvarna product brand. The HiPERFLOOR™ system enhances the beauty, strength and abrasion resistance of the floor while reducing maintenance and costs. HiPERFLOOR™ can radically transform a broad range of new and old constructions. With HiPERFLOOR™, Husqvarna offers first-class results from a premium brand with premium service.

PREMIUM FINISH A decorative, high-gloss finish for exposed floors. An indoor application for showrooms, high end real estate and areas where aesthetic properties that include flatness and reflectivity of the floor are a top priority.

Editorial Comment Mixed Media Information Barham Court, Teston, Maidstone, Kent, ME18 5BZ Tel: 01622 232702, Fax: 01622 320020 www.fca-magazine.com www.mixedmediainfo.com

Editor Hannah Frackiewicz hannah@mixedmediainfo.com 01622 232702 Managing Director Sam Ball sam@mixedmediainfo.com 01622 232702 Publication Manager Steve Gull steve@mixedmediainfo.com Account Executive Tom Murray-Scott tom@mixedmediainfo.com Studio Manager Chris Lilly chris@mixedmediainfo.com Artworker/Sub-editor Ben Bridgeman ben@mixedmediainfo.com Accounts Simone Jones simone@mixedmediainfo.com Terms and Conditons:

Contributions are invited and when not accepted will be returned only if accompanied by a fully stamped and return addressed envelope. No responsibility will be taken for drawings, photographs or literary contributions during transmission or in the editors hands. In the absence of an agreement the copyright of all contributions, literary, photographics or artistic belongs to Mixed Media Information Ltd. The Publisher accepts no responsibility in respect of advertisements appearing in the magazine and the opinions expressed in editorial material or otherwise do not necessarily represent the view of the publisher. The Publisher does not accept any liability of any loss arising from the late appearance or non publication of any advertisement.

Front cover:

Magazine October 2013

Welcome

to Future Constructor & Architect...

“

e shape our buildings; thereafter they shape us” – these great words of Sir Winston Churchill form a profound architectural truth that applies to both public and private buildings. For Birmingham’s new library this statement could not be more literal. Since its initial go-ahead in 2007, the design plans have been heavily influenced by the city’s cultural and industrial heritage. Now with the building officially open, the stunning new knowledge hub will inspire, educate and entertain thousands of visitors from around the country. Named The People’s Palace by lead architect Francine Houben, the new Library of Birmingham is a project of outstanding execution. The 10-storey building is wrapped with a futuristic film of geometric cladding, drawing visitors to Centenary Square on which it sits. As well as housing literary treasures such as one of the world’s greatest Shakespeare Collections, this new centerpiece comprises an adult and children’s library, study centre, music library, community health centre, offices, exhibition halls, café and lounge space and roof terraces. For more information on how this striking resource will shape Birmingham’s city, turn to page 28. Elsewhere in this edition, we profile a striking array of projects from a sustainable woodland kitchen through to a well-respected arts venue that is aspiring to be the first carbon neutral theatre in the world. In industry news, Hilson Moran’s Sustainability Director Chris Birch reflects on the latest revisions to Part L of the Building Regulations and asks the question “was it worth waiting for?” Meanwhile, in this month’s Voice of the Industry Contour Casings explores how, as an industry, we can overcome one of the significant hurdles in BIM implementation – BIM components. If you wish to comment on any of the topics featured within the edition or would like to enquire about its contributors please do not hesitate to get in touch at the usual address or fill out the reader response card.

Hannah Frackiewicz Hannah Frackiewicz Editor, Future Constructor & Architect Last month, the new Library of Birmingham celebrated its official opening ceremony, where thousands of members of the public attended to catch a first glimpse of the new building. See pg 28.

Online Enquiry 002

Install Glass Balustrades with Ease... See page 17

taperloc.co.uk

GENERAL CONSTRUCTION SUPERVISION ADMISSION

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

EASY GLASS速 3kN The toughest glass railing solution ever.

If your build calls for a glass railing system that can cope with a heavy load, Easy Glass速 3kN is the answer. Suitable for areas susceptible to overcrowding, able to resist a linear side force up to 3kN and compliant to BS 6399 part 1. For fascia and top mounting Integrated water drainage Stainless steel finish or suitable for cladding Easy installation of glass with safety wedge

Call or email us to find out all there is to know about Easy Glass速 3kN on: 0800 781 4245, sales@q-railing.co.uk

Online Enquiry 003

News 14

Voice of the Industry: Contour Casings identifies how the lack of high quality BIM components is slowing the rate of adoption.

Legal & Business: Chris Birch at Hilson Moran discusses why the industry must embark on a steep learning curve if it is to meet efficiency targets.

Features 22

Roofing, Cladding & Insulation: Louvre systems have an important part to play in improving energy performance, explains Construction Specialities.

Water Management: The Arcola Theatre implements water saving technologies to become the first carbon neutral theatre in the world.

Flooring: David Bigland, Managing Director of Moduleo explains why bespoke vinyl flooring is fast becoming more popular than mass-made carpet.

Roofing:

DOW highlights three vital considerations that must be taken into account when calculating U-values for inverted flat roofs.

Refurb & Renovation: A Huddersfield University project demonstrates how important it is to consider specification decisions in a holistic sense.

Retro Expo Preview: Here FC&A announces Retro Expo’s newly formatted show and highlights the event’s scheduled special features and themes.

Portfolios 06

Greenhouse:

The new woodland kitchen and classroom for students and visitors of the Ruskin Mill College, Gloucestershire is an inspiring and unique building structure which complements its natural surroundings.

Sustainability in Development: A stunning new development for Robert Gordon University houses the largest commercial Ground Source Energy System (GSES) in Scotland.

Design & Desire: Architect Mecanoo and structural & mechanical engineer Buro Happold provide an insight into the outstanding execution of Birmingham’s new library.

Greenhouse

Fuel in the forest The Flexirol Interior Endfold is being used to help divide the seating area to allow a classroom environment to be created

a nourishing lunch but a warm shelter from the weather during winter.” The new eco building, designed in a ‘snail shell’ framework, enables the college to serve lunches for up to 100 students and staff working on the farm and woodlands and provide training opportunities for young people with learning difficulties and disabilities.

A build for self-discovery

The new woodland kitchen and classroom for students and visitors of the Ruskin Mill College, Gloucestershire was officially opened in June 2013. With an eco-friendly design and technologies, the kitchen was planned to enable students to have cooking lessons, host events and be taught all within an inspiring and unique building structure which complements its natural surroundings.

he Ruskin Mill kitchen has been built on the site of the previous sheltered kitchen which was set up where the farm meets the woodland edge, isolated and calm, out of sight of roads and houses, which provided lunches for students and staff working on the farm and woodlands. This tented structure housed a kitchen sufficient for students and tutors to prepare lunch as part of the educational course using food grown on site. After over 10 years’

use, this field kitchen was outgrown, and architects, David Austin & Associates, were commissioned to design a new woodland kitchen building with increased capacity and high quality kitchen facilities. Janine Christley, Director of Fundraising for the College explained: “The college is located on a 120 acre campus with much of the educational curriculum based in the landscape, through the farm, fish farm, woodlands and market gardens. The kitchen is a vital facility to provide not only

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

In addition to the communal function and design of the kitchen, sustainable and renewable technologies were embraced. The timber structure creates a sustainable foundation to which a turf roof was added to benefit from natural insulation. Matthew Austin, Architect at David Austin & Associates commented: “The building’s nautilus plan form arises from the client’s desire to embody the spirit of selfexploration, discovery and transformation through its built form. The central douglas fir structure, with a rising exposed ridge beam, follows the spiral plan form. A series of tree-like posts, jointed with galvanized steel connector plates, cruciform at the base and springing diagonal braces at eaves level, support the ridge beam and set a rhythm within the space. “The palate of materials is tied between rough structure and refined finishing through the use of douglas fir for fine joinery elements including windows, sills, skirtings and dado. Birch ply completes the palate of timbers, lining the internal walls to dado height, facing the internal doors, and forming fitted furniture,” adds Matthew Austin. The task to assemble the rough sawn structure and refined finishes fell to Principal Contractor JR Building. John Ramsden, Director explained that the

Greenhouse David Austin & Associates were commissioned to design a new woodland kitchen building

The turf roof means rainwater can be harvested, the surrounding habitat can be enhanced and complemented while the shelter will have added natural insulation in winter. Low impacting technologies were incorporated into the design with a grey water system, compost toilet, energy efficient heating and rainwater harvesting.

The heating, hot water and cooking facility designed and installed by JR Building supports the buildings ethos of being completely fuelled by timber. The timber is harvested and spilt by the students and in return the Esse woodburning oven warms and feeds them. The dining area features folding doors with sliding gear system by P C

challenge to build a snail shaped timber frame structure in the woods was a pleasure to undertake, making full use of adapdability and flexibility to produce the architectâ&#x20AC;&#x2122;s design using a combination of traditional and modern timber construction methods. The end use and benefits of the building makes the project all the more special. The timber frame construction uses native species for many of its elements, with nearly all construction carried out by the JR Buildingâ&#x20AC;&#x2122;s own highly skilled team. The roof uses earth excavated from the site, and is planted to match flora found on site using locally sourced seed.

The timber frame construction uses native species for many of its elements, with nearly all construction carried out by the JR Building team

The folding system allows for a closed, warm, divided classroom in the winter and an open plan kitchen and eating area in the summer

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Greenhouse

The Flexirol product is ideal for conference centres like the Ruskin Mill project

Welcoming entrance The Flexirol Interior Endfold from P C Henderson folding hardware system helps create a welcoming environment with ability to fold completely open in summer and create an indoor/outdoor experience. Suitable for heavy interior or exterior aluminium and timber doors but still allowing movement, the Flexirol product is ideal for conference centres like the Ruskin Mill project. It allows for a closed, warm, divided classroom in the winter and an open plan kitchen and eating area in the summer. Janine Christley explained: “During festivals, conferences and special events the kitchen will be used to serve food and drink to the public. The new doors help create a warm and welcoming entrance to the building.” Already the new kitchen has allowed catering for 250 people at a recent craft camp held for families with food prepared

inside and served outside to benefit from the weather. Ongoing use of the kitchen and classroom for the college started last month to coincide with the start of the autumn term. Ruskin Mill College is an independent specialist further education college and part of the Ruskin Mill Trust. It provides residential education for 16-25 year olds from all over the UK with severe learning difficulties, including autism, Asperger’s Syndrome and developmental delay. In 1994 Ruskin Mill Trust expanded their land based training facility bringing in livestock, expanding their market gardening programme from the Ruskin Mill valley to an agricultural scale, and developing their woodworking and woodland management courses. David Austin & Associates Ltd were retained architects for Ruskin Mill Trust for many years from 1990, and have continued their work with the college for 23 years as the campus has grown in Gloucestershire as well as sister colleges being established in Stourbridge and Sheffield. Works through Ruskin Mill, Horsley Mill and Fishery, and Gables Farm have established an architectural unity throughout the college’s estate which responds to the needs, aspirations and values of the organisation whilst both drawing on and developing a spirit of place. The local architects have designed a stunning and functional asset for the college where events can be hosted. In

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

turn this can create essential income and fundraising opportunities for the trust. Works through this campus have received numerous awards and commendations, including a shortlisting in the 2010 Wood Awards for the Green Woodwork Shelter.

www.davidaustinassociates.co.uk www.pchenderson.com

■

Henderson in the multi-purpose classroom to enable the space to be opened up or divided, creating different settings for varying activities. John Ramsden, Director, JR Building comments: “The Flexirol Interior Endfold is being used to help divide the seating area to allow a classroom environment to be created. It carries bespoke made birch faced, douglas fir lipped doors with unusual vision panels. This system provides flexibility to create multiple possible layouts whilst having the durability and weight capacity to carry the heavy doors.”

The heating, hot water and cooking facility designed and installed by JR Building supports the buildings ethos of being completely fuelled by timber

www.kempersystem.co.uk

Online Enquiry 004

Sustainable, Solvent-Free and Odourless Kemperol® Liquid waterproofing and roofing at its very best

Image Copyright QQ7, 2012. Used under license from Shutterstock.com

Kemperol®

we have the liquid solution... • Ideal for refurbishment, repair and new build. • Complete solvent free and odourless waterproofing systems available. • Kemperol® membranes are laid in a single wet-on-wet process, with no need for multiple coatings, and form a totally seamless, fleece reinforced, UV stable, elastomeric membrane that cannot delaminate. • Flat and pitched roofs, balconies, terraces, podiums and walkways, warm roofs, cold roofs, green roofs and living walls, fountains and water features and the most complex detailing. • In fact, just about anything you need to waterproof, we have the liquid solution...

Kemperol Liquid Waterproofing

For more information visit: www.kempersystem.co.uk to request a Brochure, Quotation, NBS Specification, FREE Site Survey, or to arrange a RIBA Accredited CPD Seminar. Or call 01925 445532 to discuss your needs.

NEW Ceiling Barrier for over suspended ceiling tiles giving 60 minutes NEW Ceiling Barrier for over suspended ceiling tilesthermal giving 60 minutes fire protection, acoustic protection impactceiling & airborne, insulation NEW NEW NEW Ceiling Ceiling Ceiling Barrier Barrier Barrier for for for over over over suspended suspended suspended ceiling ceiling tiles tiles tiles giving giving giving 60 60 60 minutes minutes minutes fire protection, acoustic protection impact & airborne, thermal insulation fire fire fire protection, protection, protection, acoustic acoustic acoustic protection protection protection impact impact impact &&airborne, &airborne, airborne, thermal thermal thermal insulation insulation insulation

SUSPENDED CEILING BARRIER

ENVIROGRAF

PASSIVE FIRE PREVENTION PRODUCTS

Tested to BS476 Parts 20, 21, 22, 23 (1987) ● 1 hour fire resistant ● Thickness 40mm, sound resistant, tested to BS EN ISO 140 Part 4 for airborne sound reduction mean result Dntw 65 dB. ● Thermal conductivity U value 0.27W/mENVIROGRAF K SUSPENDED CEILING BARRIER ENVIROGRAF SUSPENDED CEILING BARRIER ● Easy and quick to apply, no special clothing or gloves required. Non ENVIROGRAF ENVIROGRAF ENVIROGRAF SUSPENDED SUSPENDED SUSPENDED CEILING CEILING CEILING BARRIER BARRIER BARRIER 2

® ®®®

PASSIVE FIRE PREVENTION PRODUCTS

PASSIVE FIRE PREVENTION PRODUCTS PASSIVE PASSIVE PASSIVE FIRE FIRE PREVENTION FIRE PREVENTION PREVENTION PRODUCTS PRODUCTS PRODUCTS

fibrous, can be used in sterile areas, Hospitals, computer rooms, etc.

Tested to BS476 Parts 20, 21, 22, 23 (1987) Tested BS476 Parts 20, 21, 22, 23 (1987) ● 1 hourtoto fire resistant Tested Tested Tested toBS476 toBS476 BS476 Parts Parts Parts 20, 20, 20, 21, 21, 21, 22, 22, 22, 232323 (1987) (1987) (1987)

● 1Thickness hour fire resistant 40mm, sound resistant, tested to BS EN ISO 140 Part 4 for ●● ●1 ●1hour 1hour hour fire fire fire resistant resistant resistant ●airborne Thickness 40mm, soundmean resistant, to dB. BS EN ISO 140 Part 4 for sound reduction resulttested Dntw 65 ●airborne ●Thickness ●Thickness Thickness 40mm, 40mm, 40mm, sound sound sound resistant, resistant, resistant, tested tested tested toto BS toBS BS EN EN EN ISO ISO ISO 140 140 140 Part Part Part 4 4for 4forfor sound reduction mean result Dntw 65 dB. 2 ● Thermal conductivity Umean value 0.27W/m K6565dB. airborne airborne airborne sound sound sound reduction reduction reduction mean mean result result result Dntw Dntw Dntw 65 dB. dB. 2 ● Thermal conductivity U value 0.27W/m K Easy and quick to Uapply, no special or gloves required. Non 2 2clothing ●● ●Thermal ●Thermal Thermal conductivity conductivity conductivity Uvalue Uvalue value 0.27W/m 0.27W/m 0.27W/m K K2K ●fibrous, Easy and quick special clothing or gloves required. Non can be usedtoinapply, sterile no areas, Hospitals, computer rooms, etc. ●fibrous, ●Easy ●Easy Easy and and and quick quick quick totoapply, toapply, apply, nono no special special special clothing clothing clothing ororgloves orgloves gloves required. required. required. Non Non can be used in sterile areas, Hospitals, computer rooms, etc.Non fibrous, fibrous, fibrous, can can can bebeused beused used ininsterile insterile sterile areas, areas, areas, Hospitals, Hospitals, Hospitals, computer computer computer rooms, rooms, rooms, etc. etc. etc.

● Made to fit over all tile

styles. ● ●Can be to supplied Made fit over to all tile

● Made to fit over all tile styles. accommodate downlights ● ● ●Made Made Made totofit tofitover fitover over allallall tile tile tile

styles. styles. styles. Canconditioning be supplied units. to or●styles. air ● accommodate Can be supplied to downlights ● ●Can ●Can Can be be be supplied supplied supplied tototo ●accommodate downlights Made from a 60 minutes or air conditioning units. accommodate accommodate accommodate downlights downlights downlights or air conditioning units. fire rated clotha adhered ● or orair or air air conditioning conditioning conditioning units. units. Made from 60 units. minutes ● fire Made from a 60 minutes rated cloth adhered to●Made a●Made 40mm Class 0minutes &minutes 1 ● Made from from from a a60 a60 60 minutes fire rated cloth adhered to a 40mm Class 0 & 1 fire fire fire rated rated rated cloth cloth cloth adhered adhered adhered ( as used with our sponge tosponge a 40mm Class 0 & 1 ( as used totoa toa40mm a40mm 40mm Class Class Class 0with 0&0&1our &1 1 ( as used with our sponge underfloor fire barrier ) underfloor fire barrier ) ( as ( as ( used asused used with with with our our our sponge sponge sponge

underfloor fire barrier ) underfloor underfloor underfloor fire fire fire barrier barrier barrier ) ) )

www.envirograf.com www.envirograf.com sales@envirograf.com www.envirograf.com www.envirograf.com www.envirograf.com sales@envirograf.com sales@envirograf.com sales@envirograf.com sales@envirograf.com sales@envirograf.com

Tel : 01304 842 555 :: 01304 842 555 Tel 01304 842 555 Fax 842 666 Tel Tel Tel : 01304 :: 01304 :01304 01304 842 842 842 555 555 555 Fax : 01304 842 666 Fax Fax Fax : 01304 : 01304 842 842 842 666 666 666 Fax :: 01304 01304 842 666

Online Enquiry 001 Online Enquiry 001 Online Online Enquiry 001 Enquiry 005 Online Online Enquiry 001 Online Enquiry Enquiry 001 001

Sustainability in Development

The £115 million redevelopment of the Garthdee Campus has been designed by BDP architects

Groundbreaking investment The stunning new development designed to underscore Robert Gordon University’s ambition to raise its global profile is remarkable in many ways, not least the low carbon footprint of the central campus building. of cooling should be provided. Consequently the amount of CO2 produced is far lower than for conventional heating and cooling, creating the potential for considerable carbon savings – a prime attraction for the university which, in common with other universities, has to meet tough statutory obligations to reduce its carbon footprint. These figures are not pie-in-the-sky: GI Energy’s installation at the iconic One New Change complex in the shadow of St Paul’s Cathedral in London has in practice produced a Co-Efficient of Performance for heating and cooling of 4.1 over a full year of operation. Performance data was collected over an entire year by GI Energy’s sophisticated monitoring and

Robert Gordon University in Aberdeen was voted Best Modern University in the UK 2012

he stylish new main campus building which has a superb setting on the banks of the River Dee houses the largest commercial Ground Source Energy System (GSES) in Scotland, recently commissioned by GI Energy. By drawing on the heat stored naturally underground – and returning excess heat from the building to the ground – the GSES provides a truly renewable form of heating and cooling that dramatically cuts the building’s carbon footprint. Its performance is expected to outstrip conventional forms of heating and air conditioning: for every kilowatt of power required to run the system, up to five kilowatts of heating and up to six kilowatts

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Sustainability in Development control unit. Similarly the company’s GSES system at Oxford University’s new Oxford Earth Sciences building, where the constraints of the site required there to be back-up heating and cooling from gas boilers and electric chillers, operated so effectively that it produced carbon savings 23% higher than originally anticipated, despite the building requiring more heating and cooling than expected when it was at the design stage on the drawing board. Ground Source Energy Systems work by exploiting the fact that heat from the sun is stored in the earth. They consist of an array of underground pipes linked to a series of heat pumps. Liquid pumped through the pipes extracts heat from the surrounding ground. It is then passed through the heat pump which brings it up to a temperature high enough for central heating. For cooling, the system is simply used in reverse. GSES

systems are especially efficient when both heating and cooling is required, as heat is cycled between the ground and the building then back again. The pipes – commonly known as earth loops – can be arrayed horizontally a few metres below the surface or sunk in deep boreholes. They can also be submerged in lakes or reservoirs or (low pressure) underground aquifers. A technique developed by GI Energy and Cementation Skanska also allows them to be incorporated within the foundation piles of a building.

Great expectations Robert Gordon University in Aberdeen – voted Best Modern University in the UK 2012 – is moving all of its teaching to its Garthdee campus which aspires to become the best riverside campus in Europe.

The GSES at the BREEAM excellent rated Garthdee main campus building is expected to provide “exceptional” Co-efficients of Performance

Garthdee campus aspires to become the best riverside campus in Europe

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

The extensive grounds were generously donated in the 1950s by Scottish architect Scott Sutherland during his lifetime. He handed over the house in which he had lived for many years and helped to fund its extension in order for it to accommodate the School of Architecture of the then Robert Gordon’s College where he himself had studied. The Scott Sutherland School of Architecture and the Built Environment has been based in the house for more than half a century. The £115 million redevelopment of the Garthdee Campus has been designed by BDP architects and the centerpiece of the 120-acre site is a new building for the School of Art and Architecture which is arranged as two shallow plan linear teaching blocks grouped around an internal street and courtyard space.

Sustainability in Development The new campus building at Robert Gordon University in Aberdeen did not present the same level of challenge as One New Change, where critical parts of the GSES system had to be incorporated into foundation piles, or Oxford Earth Sciences, where the size of the system was limited by the size of the site and the fact that pipes could not be sunk beyond 64 metres underground lest they hit a high-pressure underground aquifer that ran underneath the building. There was a very real danger of flooding parts of Oxford!

Solid foundations With Aberdeen being known as the “granite city” unsurprisingly the ground underneath the site was solid granite rock which, although hard to drill through and abrasive, had other advantages. John Mackintosh, Engineering Manager, of GI Energy, said: “Granite has really good thermal conductivity. It’s very dense, so is ideal for geothermal systems. Despite it being a hard and difficult rock to drill, it’s all very consistent, so we know what to expect and get good, stable results. “From the modeling we are expecting a Co-efficient of Performance of up to 5 for heating and up to 6 for cooling.” All of the building’s cooling and its base heating load are provided by GI Energy’s GSES system, which can provide 900 kilowatts of heating and 900 kilowatts of cooling. Back up heating is supplied by conventional gas boilers.

The new building is arranged as two shallow plan linear teaching blocks grouped around an internal street and courtyard space

The ground underneath the site was solid granite rock which, although hard to drill through and abrasive, had other advantages

GI Energy, which as one of the market leaders and pioneers of the use of Ground Source Heat Pump systems in the UK, has built up considerable expertise in drilling, sunk 66 boreholes to a depth of 200 metres to accommodate the earth loops. These were buried underneath the three car parks created adjacent to the main campus building. There are eight heat pumps – all reversible – and the performance of the whole system is controlled and remotely monitored by GI Energy’s bespoke computerised control system in order to optimise its performance. Sensors throughout the system take readings and the control system can switch each pump individually between heating and cooling mode, depending upon factors such as the external and internal air and ground temperatures. Chris Davidson, Director of Development at GI Energy, is expecting the GSES at the BREEAM excellent rated

Garthdee main campus building to provide “exceptional” Co-efficients of Performance. He explained: “The local granite rock acts as an inter-seasonal energy store, absorbing the summer heat that is rejected from the building and storing it for re-use in the winter period when heating is required. “Ground Source Energy Systems have an enormous role to play in reducing carbon emissions and providing energy efficient heating and cooling. “They have become even more attractive since the Government nearly tripled the level of Renewable Heat Incentive payments for large GSHP heating systems and should provide considerable savings on running costs in the long run. “The question for developers now is – why would you not want to benefit from a Ground Source Energy System?”

www.gienergy.net www.bdp.com

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Voice of the Industry

Standard practice

The quality of data is key to being able to form comprehensive and accurate specification

Driven by the Government’s BIM agenda to make ‘Level 2 BIM’ mandatory on government contracts by 2016, BIM is being championed as the vehicle to a more sustainable industry and its processes. Here, Contour Casings outlines the importance of quality data. a powerful tool. As the primary advantage of designing using BIM is enhanced co-ordination and the ability to extract comprehensive information at various stages of the design and asset management process, the ability to easily locate, download and import manufacturer-specific BIM objects containing rich embedded data will be fundamental going forward. The latest BIM content is now loaded with exhaustive background data, allowing pre-emptive decisions to be made throughout the full life-cycle of a building. Steven Attwood from Sprunt Architects, comments: “The quality of data is key to being able to form comprehensive and accurate specifications. By sourcing good

quality BIM families from progressive BIMready suppliers, we know that all technical information is up to date, removing the potential for error. All consultants working together on the project also need to be BIM-ready; essentially the project needs to be fully-BIM or not BIM at all.” Although rapidly gathering pace, the adoption of BIM in the industry is still at a relatively early stage, with standards and protocols regarding data still being formalised. At the beginning of its 5-year program, the UK Government’s requirement for the first year was that every project should have a “spreadsheet containing as much information about a building in as complete and as useful form as

ne quote that echoes through the annals of time is “knowledge is power” – this is the essence of BIM (Building Information Modelling). With the uptake of BIM now gathering significant pace in the industry, designers, contractors, facility managers and manufacturers are now benefitting from the time and cost savings, clash detection, estimation and scheduling efficiencies and enhanced collaboration that BIM can deliver. However, it has been concluded from numerous industry reports that a distinct lack of high-quality BIM components was one barrier slowing the rate of adoption in the industry, with those that are available, not containing sufficient background data to allow the full potential of BIM to be levied. High-quality, powerful BIM objects consist of three essential attributes, visual representation, embedded data and modelling capability.

Embedded data A visual representation allows key dimensions to be gathered, the latest BIM content is now also created with dynamic rendering, which can map an array of vibrant pre-loaded finishes across the surface of the object. As well as being a useful visualisation tool permitting designers to take a client on a virtual tour of the building, the selection of finishes can now be done at design stage, reducing construction time and removing any opportunity for human error. However at a later design stage deeper levels of information are required, this is where the embedded non-graphical data becomes the focus. It is the connection between the visual representation and the rich background data that makes BIM such

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

It has been concluded from numerous industry reports that a distinct lack of high-quality BIM components was one barrier slowing the rate of adoption

Online Enquiry 006

NEW

the complete

Commercial

washroom collection

As leading manufacturers and suppliers within the washroom market, Nicholls & Clarke offer the total washroom solution consisting of all eco products and solutions required to build a quality commercial washroom for any environment. Established in 1875, we have broad experience in working together with clients that have varying budgets, requirements and priorities working across different industries.

“most office buildings can easily reduce water consumption and their water bills by around 50% by simply introducing small water saving Tiles inspired by by one of of nature’s sweetest creations Tiles inspired one nature’s sweetest creations measures”

the nature’s environmental agency Tiles inspired by by one of of nature’s sweetest crea Tiles inspired one sweetest cr

Nature has has a way of taking something veryvery simple and and making Nature a way of taking something simple making 100% Order your FREE Commercial Washroom Collection Catalogue Today!100% Design Design

it complex and and beautiful. Our Hexagram range allows you very to doto it complex beautiful. Our Hexagram range allows you do Nature has a way of taking something very simple and and making Nature has a way of taking something simple making

info@nichollsandclarke.com

Stand the same. Available 13incolours this range has virtually limitless the same. Available 13 colours this range has virtually limitless it complex and beautiful. Our Hexagram range allows you toStand doto do itincomplex and beautiful. Our Hexagram range allows you

0 8design 4 5 6 potential. 0 5 1 3 4Contact 5 I ourwsales w w team . n i cfor h omore l l s ainformation. n d c l a r k e . c o mE50 E50

design potential. Contact our sales for more information. the same. Available in 13team this this range has has virtually limitless the same. Available incolours 13 colours range virtually limitless design potential. Contact our sales teamteam for more information. design potential. Contact our sales for more information.

Voice of the Industry interrupt the design process to create an object themselves, or spend time locating objects in paper-based catalogues. Early-adopters amongst building product manufacturers are now providing highquality BIM components that can be downloaded fast and for free from BIM Libraries located on supplier websites. Some of these websites are now increasingly being used as complete BIM toolkits for architects and consultants to deliver their BIM projects, containing extensive technical literature and case study information and catering for both experienced BIM designers and those who have recently invested in software and training. “Being able to download an object and import it directly into a BIM saves designers considerable time,” says Steven Attwood from Sprunt Architects. “Having access to websites and objects that have extensive up-to-date information allows the architect to instantly know what is available. Previously we would have to draw the object ourselves, only to discover that it is not achievable and then having to find some middle-ground with the contractor and client. This allows specification at a much earlier stage in the design process.”

Realistic manipulation

are hosted alongside CAD documents. These files are available via “Quick Links” and in various file formats, delivering fast downloads and simple integration into a building design. This allows the user to identify, create and specify the correct solution quickly and with confidence. Presently, architects frequently have to

Stuart Banbery is Marketing Manager of Contour Casings, responsible for strategy planning, BIM co-ordination, new product development, advertising, PR, technical communications, web development and social media

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

The most innovative objects from building product manufacturers embracing BIM has been built parametrically to allow flexible modelling techniques. Parametric objects allow the user to ‘stretch’ an object into a range of sizes and shapes, but with inbuilt constraints that prevents manipulation of an object into a form that cannot be manufactured. The highest-quality BIM content is built with maximum design flexibility for the user in mind, containing a multitude of user-controlled design options. “This is a much better way to work,” says Steven Attwood from Sprunt Architects. “It allows the designer to maintain design control, flexibility and freedom. When we alter the size of an object, all the project information is also updated, making scheduling and estimation a far more efficient process and removing any margin for human error.” The effective creation and availability of powerful, data-rich BIM objects that combine all essential visual, data and modelling attributes, is fundamental to the rate at which BIM becomes a standard industry practise. It is also key to the full power of BIM being levied, benefitting designer, asset manager and end user.

■

possible”. This spreadsheet is known as COBie – Construction Operations Building Information Exchange. COBie helps organise information about new and existing facilities and document both Buildings and Infrastructure assets. It is a means of sharing structured information taken from multiple platforms and software, just like CDM and BIM. All high-quality and powerful BIM components will be compatible with the COBie 2012 specification and will contain links through to where information such as manufacturers O&M instructions can be obtained; typically this is downloaded from the manufacturers’ website. Proactive building product manufacturers now regularly consult with designers to understand precisely what technical information they require and in what file formats. Current industry feedback is that although the demand for BIM objects is rapidly growing, during the transition period until BIM becomes standard practise designers will still require traditional CAD documents containing full specification information. Responding to this, forward-thinking manufacturers are now launching innovative websites where BIM objects

www.contourcasings.co.uk

Door Hardware  Shower Hardware  Railing Hardware  Glass and Glazing Supplies 

Install Glass Balustrades with Ease... The TAPER-LOC® System is the simple way to install glass railings and balustrades*. • 50% faster to install than traditional alternatives • Save Time & Money - The horizontal taper-loc design allows the system to be adjusted, dismantled and re-set • Meets the strictest building code requirements BS6180:1999 and BS6399-1:1996

Ready... Set...

Conforms to BS 6180:1999 & BS 6399-1:1996

Done.

GENERAL CONSTRUCTION SUPERVISION ADMISSION

Patented

t: 00 800 0421 6144

e: CRL@crlaurence.co.uk

taperloc.co.uk

*For toughened/toughened laminated glass from 12mm-25.52mm thick

Online Enquiry 007

Online Enquiry 008

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Partition Walls

Variflex panels can be separated from the frame, allowing individual units to be replaced if damage should occur

New revenue stream for hotel

■

A modern partitioning system will certainly deliver more flexible space but, if designed with careful consideration it can also generate a new revenue stream for a business, potentially paying for the initial capital investment and increasing profits into the future.

ne such example is the Radisson Park Inn Hotel in Peterborough, where the three stud-wall divided meeting rooms just did not allow them to maximise profits from hiring income. Working in close partnership with contractor Heritage London and architect Jefferson Sheard, partitioning experts Style aimed to deliver a moveable wall system that would extend the use of the current facilities. “We recommended dividing the spacious functions area with DORMA Variflex sliding panels, creating three large meetings rooms and break-out area that all benefit from an abundance of natural light,” explains Mike Fine, Style’s Director for the Midlands. “Since Style’s moveable walls were installed nine months ago, we have significantly increased the hiring revenue,” confirms Simon Smith, General Manager at the hotel. “The system is very flexible and allows us to quickly divide the rooms into private areas to meet the requirements of a wide variety of groups.” Further extending the functionality of the space to the evenings and weekends, the area can now be opened out to create an attractive venue for weddings and social events allowing the hotel to compete in a highly lucrative sector that was previously unobtainable. Apart from being easy to manoeuvre, DORMA Variflex delivers exceptional privacy to divided areas with sound reduction of up to Rw 60 dB and also has a 30 minute fire rating if required. A long term solution, the Variflex panels can be separated from the frame, allowing individual units to be replaced if damage should occur. The Radisson Park Inn Hotel currently has the panels finished in a very clean, pearl grey laminate, and when closed each has a pass door with a contrasting wood veneer American oak finish. When the interior decor needs updating however, it is a simple matter of changing the panel finishes without having to replace the whole wall structure. “Variflex provides a wide choice of elements and stacking/parking arrangements,” explains Mike Fine, Style’s Director for the Midlands. “The system’s particularly high level of flexibility makes it ideal for many scenarios, even in the case of complicated room proportions where sloping ceilings or circular spaces have to be accommodated.”

Style recommended dividing the spacious functions area with DORMA Variflex sliding panels, creating three large meetings rooms and break-out area

(

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

sales@style-partitions.co.uk 009 01202 874044

Online Enquiry 010

Glass & Glazing

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Drainage

Gas plant specifies robust drainage system Located on the edge of the British continental shelf some 125km north-west of the Shetland Islands, lie the Laggan and Tormore gas and liquid hydrocarbon (Petroleum) fields, surely a uniquely challenging environment, but one with great potential for the UK energy industry.

Offshore Engineering & Operations unit in October 2010. Morrison Construction was then awarded a contract by Petrofac in June 2011 to carry out site infrastructure works including underground and surface water drainage facilities, roadways and buildings. With the shoreline and waters around Sullom Voe home to large populations of seals, dolphins and other sensitive wildlife habitats – there are a number of off-shore Special Areas of Conservation (SAC) in the area, Morrison Construction and other contractors were asked to ensure any ecological impact was minimised during and after the construction phases. The Shetland Gas Plant site is situated on a steep slope and required extensive earthworks.This together with the plant’s location and harsh weather conditions characterised by 1000 to 1700mm annual average rainfall and frequent storm events, meant the surface water drainage system employed would have to be robust and very efficient at controlling surface water runoff. All collected surface water had to be

Morrison Construction was looking for a channel system available in at least three sizes to drain the site’s roads and service areas

channelled into a separator, tested for contamination before being released into the sea. Calculating the hydraulic performance needed, Morrison Construction was looking for a channel system available in at least three sizes to drain the site’s roads and service areas. After dialogue with Hauraton UK Technical Support staff, the company’s FASERFIX SUPER 300, 400 and 500 channels were specified with Class D400 ductile iron slotted gratings. The grating specification chosen featured parallel rows of 20mm wide slots, each half metre grating being secured to the channel with the company’s patented SIDE-LOCK system and eight high tensile bolts.The order for the 1425 metres of channel required was placed with Builders Merchants Grafton Group contracts office in Glasgow, who decided to process the orders through their Buildbase Shetland Depot in Lerwick.

■

o process the gas and liquid hydrocarbon reserves, a new on-shore plant is being built on a 540,000m² site located to the east of the established Sullom Voe oil terminal on Shetland.The new plant will occupy an area of about 250,000m². Started in early 2010, the Shetland Gas Plant will be connected to the LagganTormore off-shore subsea production system which is being jointly developed by Total E&P UK and Dong E&P (UK). Once operational, the Gas Plant will be capable of processing up to 500 million standard cubic feet of gas per day and will employ around 70 people. Planned to be on stream by mid 2014, the new facility will be operated by Total. An initial contract was awarded to Irish company, Roadbridge in March 2010 to carry out the site preparation works and the construction of a 2.4 mile access road. The engineering, procurement, supply, construction and commissioning contract for the plant itself was awarded to Petrofac

The grating specification chosen featured parallel rows of 20mm wide slots

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

(

tim.connolly@hauraton.co.uk 01582 501380 011

Structural

DECORATIVE ANTI-SLIP GLASS

Mainly for anti-slip use and rated R10 to R11, for use in glass floors, stair treads, bridges and walk on roof lights, however can be specified anywhere an economical solution is required for a decorative glass product.

COMFORT R1O

Can be processed, toughened and laminated to maximum size of 3210mm x 2250mm. Further information is available from our sales and technical offices

DREAM R11

ELEGANCE R1O

www.firmanglass.com

Glazing Specialists SECRET R11

TRUST R11

To find out more visit www.firmanglass.com Firman Glass,19 Bates Road, Harold Wood, Romford, Essex RM3 OJH Tel: 01708 374534 Fax: 01708 340511 Email: sales@firmanglass.com

In association with

Online Enquiry 011

htOnline tp:/ www.fca-magazinEnquiry e.com/contact-us/adver012 t-enquiry

www.firmanglass.com 21

Roofing, Cladding & Insulation

Broadway Pier

Building protection Architects and engineers should consider a wide range of factors when specifying louvre systems. This will ensure the maximum benefits are gained from this effective ‘fabric first’ solution to improving a building’s sustainability, says Simon Hunter, Product Manager of Louvres at Construction Specialties.

n estimated 45% of the UK’s carbon dioxide emissions come from buildings: principally from space heating and cooling, water heating, lighting and other building systems. As a result, public and private sector clients are seeking ever-higher sustainability ratings for their buildings. The emphasis is on ‘fabric first’ solutions, which means designers are increasingly using natural light and ventilation as well as higher levels of insulation, combined with more energyefficient building systems. Louvre systems have an important part to play in improving energy performance. Needed on most buildings, these systems allow air flow, both intake and exhaust, to HVAC and other building systems, while protecting these openings against rain ingress. As well as allowing natural ventilation, an efficient louvre system can improve air flow, which means less power is needed to move the volumes of air required. In the case of HVAC systems, this energy efficiency improvement can sometimes mean a smaller and less powerful system is required for space heating and cooling. There are three main types of louvres: screening louvres, standard drainable louvres

and storm-resistant (or performance) louvres. Screening louvres have the simplest designs and are suitable for locations where water penetration will not cause significant problems and economy is the primary consideration, such as screening of rooftop plant or in a multi-storey car park. They have simple blade shapes, which allow good air flow but give limited defence against rain.

Optimum defence Standard drainable blades give good air flow and some rain defence but do not perform so well with wind-driven rain.They are used when occasional ingress is not a major concern and where some drainage of cascading water is required. Storm-resistant, or performance, louvres on the other hand, typically provide moderate to good air flow with excellent defence against wind-driven rain.They are used when high levels of ventilation and maximum protection from the rain is needed, for instance when sensitive equipment such as HVAC plant is behind the louvre.They have blades with complex profiles and use the “tangential separation effect” to force air entering the louvre to

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

change direction rapidly and shed water droplets, which then drain away. To get the best possible results from a louvre system, it is crucial that it is specified correctly. Specification is always a compromise between air flow and water ingress.Traditionally, louvres are specified based on free area (typically 50%), calculated by measuring the clear distance between the blades and multiplying it by the width of the louvre panel (or height, if the blades are arranged vertically). Clearly, free area is dictated by the size of the louvre. Industry commonly uses a 1m by 1m louvre when quoting free area but, in reality, louvres are never precisely this size. In fact, the smaller the louvre, the lower the proportion of free area, as it is affected by the space taken up by the head, cill, jambs or mullions. Free area is also affected by other factors, such as additional structural support, or if bird screens or insect meshes are fitted. Finally, and perhaps most importantly, free area alone does not take into account how the air flows through a louvre. All louvres restrict the passage of air and this resistance is called the pressure drop.This dictates how much air gets through the louvre and therefore how much can effectively be used.

Roofing, Cladding & Insulation

Memorial Hospital, Colorado Springs

Too high a pressure drop and not enough air will be allowed through, which can cause a rapid temperature rise inside a building, in turn causing problems with plant. As louvre design has changed in response to demand for better water protection, with a resultant change in performance characteristics, engineers and architects should move away from specifying louvres purely on free area and instead consider a number of different factors.These include

site location, prevailing weather conditions (in particular wind direction) and the location and exposure of the louvres (which will dictate air flow rate and the amount of potential wind-driven rain). These should then be balanced with the required air flow, the maximum acceptable pressure drop, the degree and depth of acceptable water penetration and finally, the buildingâ&#x20AC;&#x2122;s exterior design, which can dictate where louvres can be placed and how they fit into the aesthetics. Louvres come in a wide range of designs to suit any application.Those with visible mullions (the structural members that support the blades) can be used as a design feature, in line with curtain wall panels or windows.Visible mullions are not only aesthetically pleasing, they are designed to be part of the drainage system. A system with hidden mullions, on the other hand, gives clean, architectural lines because the support system is behind the blades.These systems are normally used to provide screening and protect buildings with multiple openings. Most performance louvres can be shaped on plan to give curves or the impression of a curve (by using faceted panels). It is important to realise, however, that performance can be reduced, particularly if horizontal louvres are being used on circular shapes, as the drainage characteristics of

their complex blade profiles can be affected. Louvres are also available with different finishes and colours but some finishes are more environmentally-friendly than others. All Construction Specialties louvres, for example, can be specified with either an anodised, polyester powder coat, or with a non-toxic,VOC-free powder coat, which is more durable than the standard architectural metal finish of liquid fluoropolymers (the manufacture of which produces VOCs and hazardous waste). A well-designed louvre can enhance a buildingâ&#x20AC;&#x2122;s design and will reduce the pressure drop, allowing a larger volume of air through and thus cutting the amount of fan power needed to deliver the required air flow. Conversely, poor specification can lead to rainwater ingress, not enough ventilation, wasted energy and poor performance, not only of the equipment being ventilated but that of the building as a whole. Louvres are clearly an excellent way of helping architects and engineers meet evermore demanding environmental legislation and client requirements for sustainable buildings. Careful design and specification of louvre systems, balancing ventilation, rain protection and aesthetics, can help improve efficiency, lower energy consumption and reduce carbon emissions.

www.c-sgroup.co.uk

â&#x2013;

Froedtert Hospital, Wisconsin

CSI Marquette, Michigan

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Legal & Business

Adapting to change Chris Birch, Director of Sustainability at Hilson Moran takes an in depth look at the revisions to Part L of the Building Regulations and highlights why the industry must embark on a steep learning curve if targets are to be achieved.

entral to successive Governments’ greening of the built environment is Part L of the Building Regulations. Some details of the latest revision, the much anticipated and very late “Part L 2013”, is now in the hands of the construction industry, but was it worth waiting for? There is no doubt that the carbon emissions targets are a step forward, albeit a small step. In a nutshell, new homes will need to target a 6% cut in carbon emissions over 2010 levels – a smaller decrease in emissions than was consulted upon. The target for non domestic buildings is 9% below the current regulations. According to the DCLG, the new regulations will save 6.4 million tonnes of CO2 out of the estimated 246 million tonnes that are emitted by UK buildings per year (that’s 2.6%). These cuts go some way to achieving Zero Carbon buildings, but not far enough. Coupled with the delays, the industry is left with a very steep climb to meet the deadline of 2016 for homes and 2019 for non-domestic buildings. In the coming months ahead of implementation in April 2014, the suppliers to the construction industry; manufacturers, software developers, architects and engineers will join the three yearly push towards developing viable technical

solutions to meet the new standards prior to the next revision in 2016. But this doesn’t mean that we’re actually going to meet them anytime soon. Inevitably, due to recent economic conditions, many developments which have stalled in construction will be able to continue under the old regulations, which means that buildings designed to the old standards will

Chris Birch is a director within Hilson Moran’s sustainability group. He has over 21 years’ experience as a sustainability consultant, having previously worked at CES (now AECOM), Entec UK and WSP Environmental.

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

emerge for some time yet. Furthermore, the design software needed to meet the new regulations is not available at present and, when it is, will no doubt go through the usual teething period while problems are ironed out. On this basis, it could be 2015 before any new Part L schemes are on site. Looking at the detail, we welcome the full implementation of Fabric Efficiency Factors for homes promoting a more sustainable fabric first design approach and hopefully discouraging the tendency to over specify renewables as a quick but costly fix. At the same time however, we are disappointed with the lack of ambition in the new regulations particularly in relation to the lack of new standards for refurbishments and existing homes, which represent the vast majority of UK emissions. Cost is another issue. According to the DGLC, for the latest changes to Part L, the small increase in construction costs will be heavily outweighed by subsequent energy savings, suggesting a £384m net saving for people and businesses over the average lifetime thanks to the new features. However, the cost is borne by the developers and contractors, and the saving by the home owners and tenants – and there is still very little evidence that home owners and tenants are willing to pay significantly more for sustainable buildings. In design terms, for major development, the deadlines for zero carbon buildings are just around the corner and further delays or dilutions to the targets, such as those experienced with the Carbon Reduction Commitment, Display Energy Certificates, Feed in Tariffs and the Green Deal, to name just a few, will only hinder the industry further. The coalition seems to be developing a reputation for making bold pronouncements about green growth, only to water down its ambitions when it comes to the nitty gritty of actual policy-making. But as we creep out of recession, the construction industry is craving certainty to make long term investment plans and isn’t shying away from strong targets. These revisions to Part L may make for the “Greenest Building Regulations ever” issued by the “Greenest Government ever”, but it’s all about degrees. Let us remember that the UK construction industry is one of the best in the world and has an excellent track record in adapting to new standards and innovative construction methods – but it needs the certainty of a government that is willing to be both bold in its ambitions and reliable and consistent in its execution.

■

218,000ft2 Moorgate Exchange development in City of London, completing in the first quarter of 2014. On target to achieve both BREEAM ‘Excellent’ and LEED Platinum ratings.

www.hilsonmoran.com

R PR

CT SA

ATIO

ARE YOU LOOKING FOR QUALITY CDM TRAINING AT AN AFFORDABLE PRICE? Shaping and sharing best practice in construction health and safety risk management

How can you be confident of the course quality? APS Accredited Training Providers have been vetted by the Association for Project Safety, the leading organisation for construction health and safety risk management.

APS Accredited Courses include:

• The Management of CDM Co-ordination • Design Risk Management • Site Waste Management Plans - Client Adviser

Secured by Design: Sectional Garage Doors* • With ProMatic or SupraMatic Series 3 BiSecur operators

• Automatic door locking remains fully functional even in the event of a power failure

For a full list of APS Accredited Training Providers and details of their Accredited Courses, dates and locations, go to www.aps.org.uk

• Tested and certified

* Only available for EPU, LPU and LTH garage doors

For more information go to

ref: FCA

www.aps.org.uk OR CALL 08456 121 290 Online Enquiry 013 APS_FCA_Feb.indd 1

Online Enquiry 014

24/01/2012 14:07

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Water Management Roca’s W+W utilises waste water from the basin to fill the cistern

Sustainability takes centre stage Public buildings provide the ideal platform to communicate the importance of sustainability to the people that use their services. The Arcola Theatre, in Hackney, has taken this responsibility very seriously, with the aim of becoming the first carbon neutral theatre in the world and a remit to get the ‘green’ message across to its patrons and local residents.

ne of the key elements of Arcola’s sustainability strategy is water saving, helped along the way by Roca’s innovative

W+W toilet; a unit that combines the wash basin and water closet in one, with water from the sink used to flush the toilet. The Arcola Theatre is one of the most

Water usage cut by half Roca’s W+W utilises waste water from the basin to fill the cistern, saving up to 25% more water in a typical household compared with dual-flush systems. Arcola has been monitoring water usage since 2010 and, following W+W’s installation, the savings have been dramatic – spring 2013’s figures are 50% lower than the previous year. Making W+W work even harder is the Singles-Pro basin mixer, which features Roca’s innovative Cold Start system, designed to help save both water and energy. The progressive cartridge means the tap turns on with cold water first, drawing on the hot supply only as and when it’s required. Ruth Mulandi, Arcola’s Commercial Manager, commented: “When we researched water-efficient toilets, Roca’s offering just made good sense. We loved the design of their products and now they’re in situ, visitors find them so intuitive to use.” In addition to saving water, W+W saves space, with the wash basin housed on top of the cistern. Its modern, L shaped design, fits snugly into the restricted area of Arcola’s toilet cubicle. Arcola Theatre stands as an example of how an arts venue can do more than just entertain, promoting a greener way to live to its audiences and the wider community. Roca’s part in this project demonstrates the company’s own remit to make sure our most relied upon conveniences are innovative, functional and above all, sustainable.

■

W+W saves space, with the wash basin housed on top of the cistern

respected arts venues in the UK, with a commitment to cutting carbon as well as creativity. To deliver its green ambitions, the theatre has a sustainability/education arm, Green Arcola and a sister company, Arcola Energy; an energy technology incubator. Over the last three years, Arcola, housed in a converted paint factory, has undergone a ‘green’ transformation, which, in addition to W+W, includes waste wood biomass boiler, natural ventilation system and an innovative LED lighting system, powered by solar photovoltaics. Funded by a £1m grant from the Arts Council, plus additional support from donations and local volunteers, main renovation works took place in 2012, with Roca’s W+W installed last summer.

www.roca.com

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

ed ed! lifi is ua gn t q co Ge et re g &

Online Enquiry 015

The MCIAT Professional Assessment

– a new qualifying route What is the MCIAT Professional Assessment?

The MCIAT Professional Assessment is a flexible, rigorous, robust and quality assured qualifying process, based on performance and designed to recognise the diversity of Architectural Technology. Candidates must provide an in-depth critical analysis clearly summarising their professional experience. This should be a reflective report and should refer to challenges and successes encountered whilst working on projects and how any issues were resolved. Applicants should also undertake a self-evaluation highlighting their strengths and weaknesses in relation to their area(s) of practice. The Professional Assessment process is based on four core competencies: • Designing • Managing • Practising • Developing (self)

Who can apply for the MCIAT Professional Assessment? Any applicant working in or on, for example, academia, general practice, component design, refurbishment, small residential projects, large commercial projects etc within Architectural Technology, should be able to apply their own experience to the Professional Assessment process, but they must hold one of the following membership grades: ACIAT, TCIAT or profile candidate. Each application will be assessed on its merit. However, each applicant will need to demonstrate a sufficient level of knowledge and understanding and professional competence/experience in relation to their sphere/s of practice and demonstrate to the Institute they can meet the expectations of a Chartered Architectural Technologist, MCIAT.

How much does it cost? To apply for the Professional Assessment, applicants are required to pay £300 for the assessment of the application and the Professional Assessment Interview.

For further information email our Membership Director, 27 For a faster response visit www.fca-magazine.com or use the free reader enquiry card James Banks via james@ciat.org.uk or call us on +44(0)20 7278 2206

Design & Desire

Urban narrative Last month, the new Library of Birmingham celebrated its official opening ceremony, where thousands of members of the public attended to catch a first glimpse of the new building – the project’s completion has been hugely anticipated since it was given the go-ahead in 2007. Here, architect Mecanoo and structural & mechanical engineer Buro Happold provide an insight into the building’s outstanding execution.

ince opening in 1974, the original Library of Birmingham has become the most visited public building in the city and the busiest public library in the country. It houses an extensive anthology of books, photographs, historical archives and rare printed collections of both national and international significance. While the library served the city well for almost 40 years, the outdated building no longer met the

needs of the community. Commissioned by Birmingham City Council in 2007, a new library is now providing a dramatic setting as a centre for knowledge and a place of entertainment. The 35,000m2 library comprises an adult and children’s library, study centre, music library, community health centre, multimedia, archives, Shakespeare Memorial Room, offices, exhibition halls, café and lounge space and roof terraces.

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

The building sits next to the existing Repertory Theatre (REP), which has been refurbished as part of the project. A new 300-seat auditorium has been constructed and is shared between the theatre and library in addition to a new open performance space beneath Centenary Square. The Library of Birmingham is a transparent glass building. Its delicate filigree skin is inspired by the artisan tradition of this once industrial city. The facade engineering design evolved through close collaboration with the architect and the other design engineering disciplines, commencing from the initial concepts, through the building envelope

The building’s main facade is wrapped with a pattern of aluminium circles

Design & Desire procurement period and during the construction installation. The building’s main facade is wrapped with a pattern of aluminium circles that spans from the first floor to the eighth. The filigree is fixed through brackets to the facade behind, which is mainly glazed. The overall facade pattern comprises an inner pattern layer based on 180mm diameter circles and an outer pattern layer based on a 5400mm diameter circle pattern.

The library has been designed to minimise energy consumption through the integration of passive design measures

energy solutions being implemented. The Library of Birmingham is a BREEAM Excellent rated building and incorporates grey water systems and ground source heat pumps. Although the library is a transparent building, it maintains energy efficiency through the buffering capacity of the building mass and the atria. Sun shading and reflective materials within the facades block the harsh rays of the sun during the height of afternoon while allowing natural daylight into the interiors. The ground floor benefits from the mass of the soil, which provides buffering and insulation. The circular patio cut out of the square

and restoring the existing concrete and replacing the single glazing with high performance double glazed units. Architect Francine Houben comments: “The building is formed with three stacked volumes, each connected to the city at a different scale – the lower volume and terrace relating to Centenary Square, the middle volume to the district and the upper volume to the city scale. The stacking of the library volumes creates an opportunity for outdoor gardens, each one relating to the city at a different scale. “The lower terrace – The Discovery Terrace – overlooks Centenary Square and is the most public. In contract, the upper garden – The Secret Garden – has a more introverted, intimate atmosphere, reflecting its elevated position in the building. The sloping beds of the garden respond to the gentle slopes around Birmingham.” Travelators and escalators dynamically placed in the heart of the library form connections between the eight circular spaces within the building. These rotundas play an important role, not only in the routing through the library but also provide natural light and ventilation. The rooftop rotunda houses the Shakespeare Memorial Room, designed in 1982. This Victorian reading room is lined with wood from the first Birmingham Central Library. Its prominent position as a rooftop aerie makes this delicate room visible from the square. The building’s impact on the environment has been a key consideration throughout the design and construction and has resulted in a number of sustainable

As well as integrating an intelligent subsystem on levels 1, 2 and 3 of the library – incorporating dampers and acoustic attentuators to allow a mixed mode ventilation strategy – the main facade of the REP Theatre has also been upgraded as part of the project. This included cleaning

Striking restoration

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Design & Desire creates a protected outdoor space and invites daylight deep into the building.

Reduced energy demand

A new 300-seat auditorium has been constructed and is shared between the theatre and library

Fact file © Christian Richters

Client: Birmingham City Council

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Contractor: Carillion Structural & Mechanical Engineer: Buro Happold Planning Consultant: GVA Grimley Design Manager: Davis Langdon Schumann Smith enthusiasm and skill to meet these high standards. Buro Happold has delivered the services with a high level of quality and to our full satisfaction.”

■

building has been significantly reduced through upgrades to the building envelope and replacement of certain aging systems. An energy centre has been integrated into the building to provide low carbon heating, cooling and electricity. The energy centre is also connected to the district heating scheme providing additional resilience to the building and to the network itself, contributing to the expansion of the low carbon district heating network in the area. Within the energy centre, a combined heat and power engine and absorption chiller provide cooling, heating and power. Supplementary heating is provided from high efficiency gas boilers and cooling from high efficiency chillers utilising water towers with acoustic treatment to meet the onerous acoustic requirements for the REP Theatre. Additional free cooling is provided from a ground water cooling system that pumps water from the aquifer below Centenary Square to provide cooling to the areas utilising chilled beams. The overall result for the library is a building that delivers an impressive 40% reduction in carbon emissions when compared to the Target Emissions Rate defined by the Building Regulations. Brian Gambles, Project Director at Birmingham City Council comments: “Throughout the design and construction period, the design team has maintained excellent co-operation with the client team and users, working together to deliver this common vision. The Mecanoo-led design team has delivered this vision with passion,

Architect: Mecanoo

www.burohappold.com www.mecanoo.nl

The building is formed with three stacked volumes, each connected to the city at a different scale

The building has been designed to be an exemplar low energy and sustainable building, minimising the impact on the external environment and to demand less than 50% of the energy of the existing Central Library building. The environmental and indoor climate strategy heavily influenced the building massing and form, in particular the size and shape of the atrium space, and responded to the design brief set by Birmingham City Council to achieve an innovative design with its BREEAM Excellent rating. The library and new build sections of the REP theatre have been designed to minimise energy consumption through the integration of passive design measures, high efficiency systems, intelligent building controls and energy monitoring. The energy demand for the existing REP

Singlepart

The Light Choice

Flushglaze® Fixed Rooflights

Multipart

Up to 5.2m² as one pane of glass No internal framework Standard or bespoke design Various shapes and sizes & wall abutments Walk on & Fire Rated also available Double glazed overall U-Value from *1.4W/Km² Tripleglazed overall U-Value from *0.6 W/Km² Overall U-Values can be provided Air Permeability figures provided BIM Revit Models available upon request Buy online for immediate delivery Independently tested by the BBA

Ridge

Eaves

*based on a 5.2m² rooflight

www.glazingvision.co.uk Telephone: 0333 8000 881 Online Enquiry 016

evo

flat

conservation

bespoke

Meet the family... With its Conservation, EVO, Planus and Bespoke product range, Lumen Rooflights have a family to be proud of! Check out our new 3D product viewers online at www.lumenrooflight.co.uk Contact Lumen on: 0330 300 1090 email: info@lumenrooflight.co.uk The bright choice for architects Online Enquiry 017 For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Flooring LVT flooring can be made to bespoke specifications to ensure that it is as wearable as necessary

Bespoke surfacing Whilst carpet has been an extremely popular flooring solution in commercial spaces over the years, luxury vinyl flooring is rapidly growing in demand. David Bigland, Managing Director of Moduleo explains why bespoke vinyl flooring is fast becoming more popular than mass-made carpet.

s technology has improved, luxury vinyl flooring has developed into the most stylish, durable and high-quality option for commercial solutions like office space. Designed to reflect the unique patterns and textures found in nature, vinyl flooring tiles have a multitude of benefits and even outperform their natural counterparts in many areas.This includes better insulating properties, as well as being slip resistant, moisture-proof and soundproof. LVT responds extremely well to the wear and tear of commercial and office use and as a result, can still look brand new years after being laid. Not only this, but in contrast to traditional carpet, LVT is

practically effortless to clean. A wipe-clean top layer means that LVT flooring is not only low maintenance, but there is no hiding place in LVT for dust mites or any other allergens, it is also the perfect solution for those who suffer from allergies. One reason LVT is one of the fastest growing floor products in the UK is because of its unrivalled durability. In offices for example, carpets can soon become tired and worn with years of stains and the wear and tear of heavy footfall. LVT flooring however, can be made to bespoke specifications to ensure that it is as wearable as necessary depending upon where it will be installed. Moduleo flooring is available in our Select range for office use and the Transform range,

â&#x2013;

The selection of designs available is practically limitless as designers are becoming increasingly imaginative with the looks and effects that they create

which has a thicker Protectonite PU wear layer, for areas which receive a heavier footfall. Although carpets come in many different designs, textures and colours, they do not offer the flexibility of LVT, and this has had a significant impact on the flooring industry. The beauty of modern LVT technology is that flooring can be created to be almost indistinguishable in appearance from its natural counterpart. The selection of designs available is practically limitless as designers are becoming increasingly imaginative with the looks and effects that they create.This means that LVT can be equally at home in a modern, minimalist reception as it can in a cosy staff room. In both new projects and building renovations, speed of installation is crucial. Traditionally, the time and expense of floor-preparation and product installation may have been a concern for those considering LVT instead of carpet. However, there are now innovative new formats of LVT available which make installation a breeze. One example of this is Click from Moduleo, which has been manufactured with a patented push down technology, allowing each piece to simply lock directly into place. This creates the same stunning finish, but means installation is much simpler and does not require any adhesive or time-intensive labour. As the environment becomes a growing concern, most of us are keen to lessen our environmental footprint. Traditional carpet production has been associated with the creation of volatile organic compound (VOC) emissions which are damaging to the environment. LVT manufacturers vary in their ecocredentials, however Moduleo is proud to offer very impressive green credentials; including the creation of our very own wind-powered production plant in Avelgem, Belgium. As our tiles are manufactured in Europe rather than the Far East, this also saves on unnecessary transportation and is therefore kinder to the planet. Moduleo products also consist of at least 35% of recycled material of verified origin and are themselves recyclable. As technology has evolved, LVT has swiftly overtaken traditional flooring solutions due to its capacity to better-accomodate the latest trends in interior design whilst also providing the most practical and durable solution. Be it for office or commercial use: LVT is the premium choice for style, durability and longevity.

www.moduleo.co.uk

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Online Enquiry 018

Innovative New Karndean LooseLay Our new format of luxury vinyl flooring featuring a friction grip backing that holds the product in place. No clicking. No locking.

Quick and easy to install It only took 48 minutes to lay a 71m2 office at the Energy Conservation Centre in Malvern with our new Karndean LooseLay. Superior dimensional stability paired with a unique friction grip backing meant that it could be installed over the existing hard floor*, meaning minimal disruption and down-time.

Quieter than click or laminate flooring 100% recyclable Easy to repair Should you need to replace a piece, simply lift the plank or tile in question and drop in a new one.

Realistic Wood and Stone Designs Durable 0.55mm wear layer R9 Slip resistant rating 12 year commercial guarantee 15 year domestic guarantee *Please refer to the installation instructions on our website for full details

Energy Conservation Centre, Malvern, Worcestershire in Country Oak LLP92

For more information and to see the installation video: 33 For a faster response visit www.fca-magazine.com or use the free reader enquiry card www.karndean.com/commericallooselay Call: 0845 605 6770

Roofing

Making accurate U-value calculations Reviewing or making a U-value calculation for an inverted flat roof? Then these three vital considerations must be taken into account according to Dr Steve Johnson, Technical Manager for STYROFOAM insulation manufacturer, Dow Building Solutions.

e are all aware of the importance of U-values when it comes to the long term energy performance of well-constructed buildings. U-values can in general be calculated easily, and there is software available to make such calculations very quickly. Anything that makes the job easier is welcome – but that doesn’t mean we should overlook vital factors which can lead to misleading calculations if not addressed. With the spotlight turning on the actual energy performance of buildings – not just the designed performance – ensuring U-value calculations are robust is a responsibility the industry must take seriously.

The inverted flat roof is a building element with many unique aspects, which must be tackled at the outset in order to avoid errors when making U-value calculations. Water vapour movement as well as heat transfer should be calculated, and in addition condensation issues need to be satisfactorily addressed if a robust design solution is going to be achieved. Let’s take each issue in turn.

Location, Location, Location Most people understand that two identical buildings, with identical U-values, would not deliver equal energy efficiency performance if built in different locations, due to differences in local climates. But you wouldn’t expect this to affect a U-value

ROOFMATE MK installed over ROOFMATE SL-A insulation

calculation itself – or would you? Inverted flat roof construction is simple in principle; just place the insulation above the waterproofing layer rather than below it, as would occur in traditional, warm roof construction. Interchanging the position of the waterproofing and insulation layers brings numerous advantages, but also introduces an additional mechanism for heat loss: rainwater can flow beneath the insulation boards and remove heat directly from the building fabric, before finally running off the roof and down the rainwater drainage outlet.

The inverted flat roof concept involves placing all the insulation above the waterproofing layer, however, designers from time to time may be faced with design constraints

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

“Rainfall can vary by as much as a factor of five from the driest to the wettest locations in the UK”

Roofing

“Delta U becomes increasingly important as the U-values become smaller. It is particularly important for today’s low U-values”

ROOFMATE SL-A from Dow Building Solutions is for inverted flat roofs

Whatever the approach, there must be no confusion about the thermal conductivity value to be used for the thermal insulation material, since the overwhelming majority of the total thermal resistance which will contribute to the final U-value is down to the thermal insulation layer. All insulation products have some degree of intrinsic variability in thermal conductivity. European Products Standards therefore take thermal test results and subject them to statistical analysis to create a level playing field. This improves the robustness of thermal conductivities used in calculations, and helps ensure that a consistent approach is used throughout the entire process. It also takes into consideration mechanisms such as aging into account. This analysis delivers a so-called

“declared” lambda value in accordance with the relevant European norm for the insulation being considered. For extruded polystyrene (XPS) such as STYROFOAM this norm is BS EN 13164. This declared lambda value is sometimes referred to as the 90/90 value, i.e. 90% of production achieves the quoted conductivity value with a 90% confidence level. Building designers have come to accept that declared (90/90) values for thermal insulation can be used as a design value as they represent a performance over a 25 year lifespan. However in inverted flat roof applications this declared (90/90) value needs to be additionally modified, by applying correction factors based on the unique end use conditions. ETAG 031-1 states that possible moisture absorption over time needs to be determined by examining two particular

This effect is known as Rainwater Cooling, and it must be addressed when we do a U-value calculation. So how do we do that? First, calculate the U-value without taking it into account, and then add a correction (known as Delta U) to obtain the final U-value. Obviously, the more rain which flows under the boards, the more heat is lost. The additional heat loss due to Rainwater Cooling will therefore be dependent upon the average rainfall in the building’s location and the percentage of that rainfall which reaches the waterproofing layer. BS EN ISO 6946:2007 outlines a method which can be used to calculate how much the U-value is affected by rainwater, and by how much we need to correct it. For an edge-profiled, interlocking board, a substantial proportion of rainwater can be expected to flow beneath the boards: European Technical Approval Guideline (ETAG) 031-1 stipulates that 75% can be assumed for calculation purposes. This large percentage can be reduced by placing a water control layer (not to be confused with the waterproofing layer) over the insulation and beneath the ballast layer. Tests have shown that this can reduce water flow beneath the boards to typically around 5%, making a significant reduction to

the Delta U you would otherwise calculate. Whatever the magnitude of the penalty that Rainwater Cooling brings, it needs to be correctly taken into account when making U-value calculations for inverted flat roofs.

Identifying differences When calculating U-values, we need to assess the individual materials which make up the construction element and know their respective thermal resistances, which can be derived from their thermal conductivity and thickness. If proprietary materials are used, a manufacturer should be able to provide relevant and – more importantly – accurate information for the calculation. In other circumstances, it may be acceptable to use generic information for the materials.

Underhill House Passivhaus has a roof insulated with ROOFMATE SL-A

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Roofing

Rainwater can flow beneath the insulation boards and remove heat directly from the building fabric, before finally running off the roof and down the rainwater drainage outlet

boards and thereby acts as an efficient vapour control layer. Surface condensation will also present a low risk, as the insulation boards maintain the roof’s waterproofing close to the building’s internal temperature.

Potential effects

Nevertheless, while condensation risks are low, they are not zero, and we need to consider what other physical mechanisms may contribute. As already outlined, rainwater is able to flow beneath the insulation boards, removing heat from the roof structure. This results in a sudden drop in temperature and can lead to condensation. For concrete decks – which have a significantly large thermal inertia – the

The optimum location for insulation is the outside of the building structure: this minimises thermal issues and helps to ensure that the dew point is on the outside of the building. The possibility of interstitial condensation on an inverted flat roof is further diminished, as the waterproofing layer is on the warm side of the insulation

■

mechanisms for water absorption: by diffusion and by freeze/thaw, because the efficiency of thermal insulation is impacted by the amount of moisture it contains. Only when the moisture levels have been determined can the relevant correction factor be applied – calculated in accordance with BS EN ISO 10456 – to the declared 90/90 lambda value, in order to derive a relevant application design lambda value. Adding these correction factors will mean an increase in the thickness of insulation required to achieve the same U-value. Ignoring them can lead to a significant underestimate of the amount of insulation required to achieve a target U-value.

duration and extent of deck cooling and therefore the consequent risk of either interstitial or surface condensation can be considered minimal. For lightweight decks, however, rainwater cooling can pose significant risks unless steps are taken to address it. Strictly speaking, the inverted flat roof concept involves placing all the insulation above the waterproofing layer. However, designers from time to time may be faced with design constraints, and they may want to consider placing some insulation below the deck within the ceiling void. Care must be taken with this approach, as increasing the thermal resistance below the waterproofing layer only increases the risk of condensation forming. This increased risk cannot be offset by any ventilation of the insulation layer inside the building, as this would effectively provide a thermal “short circuit” and render the roof insulation ineffective altogether. There are no hard and fast rules as to how much thermal insulation can be accommodated within a building before problems with condensation effects emerge. However, it is generally recognised that for an inverted flat roof design to perform effectively, the overwhelming majority of the insulation must be placed outside of the building and above the waterproofing layer. In summary, yes, there is more than meets the eye when calculating U-values for inverted flat roof systems and bearing issues such as condensation in mind. However, guidance is available to help ensure we all get it right – and help protect the reputation of the building industry as a whole.

“Rainwater cooling condensation is a phenomena that can happen both in the summer and winter months”

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

www.building.dow.com

STYROFOAM ROOFMATE SL-A

Leisure Build Focus

Online Enquiry 019

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

The variation in height of the inter-connecting roofs means that some roof areas overlook the roofs of other part of the development

A degree of innovation University campuses have been one area of construction that have seen a significant investment across the UK to address the increasingly competitive nature of the sector. However, those financial pressures are still very real, prompting universities to balance the need for better facilities with the need to implement projects in the most cost-effective way possible.

t Huddersfield University, recent improvements to facilities include four new buildings, including a new sports hall, Dean’s office and corporate suite, designed by architects Watson Batty.The four buildings have been constructed with a single steel frame and all adjoin each other but rise to different heights varying from 2-4 storeys.To enhance the biodiversity and aesthetics of the development, green roofs were specified for three sections of the building, including the sports hall, and a warm roof was specified for the corporate suite. The variation in height of the interconnecting roofs means that some roof areas overlook the roofs of other part of the development, with the lower roofs mostly shaded.This presented challenges both in terms of planting and drainage for the roofs and addressing those challenges became a team effort between the architects, the

roofing contractor, Cawston Roofing, the green roof supplier ABG and the waterproofing specialist, Kemper System. While the intention for the buildings had always been to install a combination of green roofs on three of the four roof areas and a traditional warm roof build-up on the fourth, the architect had originally specified a single ply membrane for the project. However, having used the Kemperol V210 cold liquid-applied waterproofing membrane from Kemper System for around 30 years, Cawston Roofing suggested to the architect that this would offer a more practical and durable alternative for a similar installed cost as the original specification. Meanwhile, ABG had developed an innovative ‘blue roof’ drainage system, which puts a High Density Polyethylene (HDPE) reservoir under the growing medium to replace the more conventional SUDS system, reducing the installation time and avoiding

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

costly and time-consuming excavation of separate drainage tanks. Explains Nick O’Mara from Cawston Roofing: “The Huddersfield University project demonstrates how important it is to consider specification decisions in a holistic sense rather than thinking about material costs in isolation. For the green roof system, avoiding the need for a SUDS system saved time, money and costs on site. For the waterproofing membrane, a change to Kemperol V210 meant that we could be more flexible with the programme and more creative with the roof build up as well as providing an FLL certified root-resistant and robust waterproofing membrane with a guaranteed service life.” For the three green roofs, Cawston Roofing applied Kemper System’s Kempertec EP primer direct to the concrete slab substrate and, once this had cured, the Kemperol V210 cold liquid resin was applied. The Kemperol V210 resin saturates a nonwoven reinforcement fleece and cures to provide a seamless, monolithic membrane that is tough and permanently flexible. ABG installed a 40mm deep ‘Blue Roof’ drainage reservoir onto each of the three green roofs which provides collection and storage or rainwater to irrigate planting during dry periods, and offers a continuous drainage layer across the roof structure with attenuation capabilities which helps control the discharge of storm water. The corporate suite section of the building has a metal deck roof and here the roof build up featured a vapour control layer installed directly onto the substrate followed by Kempertherm warm roof insulation. Cawston Roofing prepared the insulated substrate with Kemper System’s Kempertec D primer and, once this had cured, applied Kemper System’s Kemperol V210 waterproofing membrane using the same wet-on-wet process as with the green roof areas.

www.kempersystem.co.uk

The growing and medium of each roof had to take into account the roof area, location and level of shade created by surrounding buildings

■

Refurb & Renovation

SBP ARY

LIBR

sustainable-buildingproducts.com

Scan this code with your smart phone

swipe to see more!

‹‹‹

The

app

for iPhone, iPad and Android Free download available now Online Enquiry 020

BROWSE | SPECIFY | SOURCE | DIGEST The smarter way to access news and products for the sustainable building market. With its easy-to-navigate format, users can benefit from a variety of useful tools, such as the magazine’s latest issue, digital archive, suppliers and newsbank. The App is also synced with SBP Library (www.sustainable-buildingproducts.com) providing an essential specification portal. | Bespoke, reader-friendly features tailored to professionals on the move | | Timely industry news delivered at the touch of a button | | Manage print & digital subscriptions | For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Retro Expo Preview

Strategic retrofit In response to industry feedback, Retro Expo will be taking a different format this year. The two day event will take place on 5th and 6th December at the Business Design Centre in London. Here, FC&A unveils the special events and themes scheduled for the show.

The exhibition of retrofit innovation will feature 75 exhibitors including leading names such as BASF, E.ON, Kingspan,Travis Perkins and SIG360 Retrofit

he newly-formatted event will comprise of five core elements: an exhibition of retrofit innovation featuring 75 exhibitors including leading names such as BASF, E.ON, Kingspan, Travis Perkins and SIG360 Retrofit; The Retrofit Summit – a one day policy conference dedicated to the refurbishment and energy efficient retrofit of existing buildings; The Retrofit London Conference – supported by the Mayor of London, the event will explore the challenges and opportunities of low carbon retrofits in the capital; The Retro Expo Awards; and a series of technical workshops. The Summit will explore retrofit from a national, strategic perspective. The Retrofit Summit is aimed at local and national policy makers, CEOs and Finance Directors from the public sector and social housing; non-domestic property owners and asset managers; senior members of the supply chain; and representatives from the green legal, finance and project management sectors. The Summit programme will follow

two themes: ‘Retrofit for the customer are we really meeting their needs?’ is all about engaging customers effectively, influencing and educating them to make the decisions that deliver the results they most want and need. For programmes like The Green Deal, the construction industry has to sell effectively to home and business owners and tenants. This will require a paradigmshift in the way in which the industry needs to market itself, and this conference will help create a deeper understanding of customers’ challenges.

Responding to challenges Making retrofit work at scale follows on by examining the challenges of delivering retrofits well and quickly in order to meet the demand that this marketing activity will create. How do we create retrofit processes that are repeatable and replicable without making large scale mistakes? How do we equip our people on the ground to respond to the challenges of a particular property that may not fit

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

the archetype? How do we ensure design and products are interoperable? How can we quality assure retrofit without slowing down roll out? Alongside the Summit, there will be four technical workshops, exclusively designed for the colleagues of delegates to the policy event. These two-hour sessions will look at the technical aspects of retrofit and allow for in-depth discussion of de-risking retrofit, ventilation for retrofit, retrofitting vulnerable buildings and retrofit logistics and processes. This year’s Retro Expo Awards have 12 categories recognising excellence in retrofit products, innovation, design and delivery across the domestic, commercial and public sector markets. Winners will be announced at The Retro Expo Award ceremony taking place following the Retrofit Summit on the evening of 5th December 2013 at the Business Design Centre in London. Entry is free, visit www.retroexpoawards.co.uk for further information. Entry to Retro Expo is free. Tickets for the Retrofit Summit cost £245.00 per person. To book Retrofit Summit tickets, download a programme or to register for Retro Expo visit the website.

www.retro-expo.co.uk

The Retrofit London Conference will explore the challenges and opportunities of low carbon retrofits in the capital

AVOID THIS!

Eliminate slip-accidents slip-accidents at at • Eliminate

aa fraction fraction of of the the cost cost of of any any reliable reliable alternative alternative

Fast, once once only only application application • Fast, Guaranteed 55 years years • Guaranteed Effective even even when when wet wet or or • Effective

ELIMINATE SLIPPERY FLOORS!

greasy greasy

Instant slip-resistance, slip-resistance, no no • Instant shutdown shutdown of of your your facilities facilities

SLIPSTOP (European) Ltd. P.O Box 7404, Coalville LE67 4ZS ENGLAND Tel.: 01530 813 500, Fax: 01530 813 400 Email: slipstop@slipstop.co.uk Website: http://www.slipstop.com Online Enquiry 021 Shade and Shelter Specialist

OUTSIDE STRUCTURE

S O L U T I O N S

BRUNDLE

Warmagrip

™

BRUNDLE

Warmagrip the only true “warm to the touch” DDA compliant handrail component system! DDA

Building Regs

Health & Safety

Canopies, walkways, terrace covers smoking shelters and garden gazebos From the shade and shelter specialists

all

Warmagrip is a high quality PVC coated steel tube handrail system, offering the all important “warm to the touch” requirements set down in the current Building Regulations.

or .f

re needs ructu t S ide uts O ur yo

www.OutsideStructures.co.uk

It’s also quick and easy to install with internal ﬁttings for a smooth continuous handrail. Available in grey and highly visible safety yellow.

For a FREE catalogue or more information: www.warmagrip.co.uk

Online Enquiry 022

marketing@brundle.com

0115 951 2450

Online Enquiry 023

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Flooring Finishes A range of outcomes can be achieved by using the HiPERFLOOR process, depending on the purpose of the floor

exclusive concrete pre filling method (GM 3000), and the application of Husqvarna’s premium liquid densifier (Hiperhard) that increases the surface hardness of concrete. Hiperguard Premium Enhance can be applied to the surface at the end of the process to make the concrete significantly more resistant to fats, oils, water and acids.

Selection of finishes

HiPERFLOOR gets beneath the surface Husqvarna HiPERFLOOR is a unique flooring concept for the grinding and polishing of old and new concrete floors. Through research and development, Husqvarna has combined advancements in planetary floor grinders, floor treatment products and the latest resin diamond technologies to create a system where new and old concrete floors can be transformed into highly abrasionresistant, dense, smooth and visually appealing surfaces.

iPERFLOOR is not a coating but a method for mechanically grinding, treating and polishing concrete floors. Concrete is one of the most durable surfaces known to man, however with the HiPERFLOOR method the surface density and abrasion is increased to a level where the concrete surface is extremely resistant to wear and marking. By mechanically refining the surface through grinding, polishing and chemical treatment the surface can be taken to a whole new level of beauty, functionality and strength. Why should architects specify this product? It allows for durable floors with very little maintenance needed.The

economic benefits are substantial with low life cycle and reduced energy consumption due to the reflective properties of polished concrete. HiPERFLOOR also creates superior surface finishes and floor flatness. The process is odourless and relatively quiet meaning application can be worked around your requirements. No downtime, no lost earnings and minimal inconvenience. Through an innovative combination of premium great silicates, liquid materials and specifically engineered diamond technology, the Husqvarna HiPERFLOOR process moves through a number of steps.These steps are made up of diamond grinding using progressively finer grit sizes, an effective and

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

A range of outcomes can be achieved by using the HiPERFLOOR process. Depending on the purpose of the floor, the options include: Industrial Finish – a low-gloss finish customised for industrial floors. Primarily for an indoor application targeting large areas such as warehouses and department stores where flooring functionality is of primary concern. Commercial Finish – a medium-gloss finish for semi-exposed and low-exposed floors. An indoor application aimed at retail areas, shop fronts and public spaces. Premium Finish – a decorative, highgloss finish for exposed floors. An indoor application for showrooms, high end real estate and areas where aesthetic properties that include flatness and reflectivity of the floor are a top priority. With Husqvarna equipment, diamond tools, concrete chemicals and the HiPERFLOOR process a concrete surface can be changed into a more desirable looking surface. *

husqvarna.construction@husqvarna.co.uk

(

0844 844 4570

024

HiPERFLOOR creates superior surface finishes and floor flatness

CPD Focus

GEZE UK relaunches Removing Barriers to Access CPD Approved by RIBA, the seminar offers chartered architects invaluable advice for the use and specification of door control devices so that doors do not become obstacles. It has been completely rewritten to incorporate all the recent changes in legislation.Those taking part in the seminar will receive guidance on all the relevant standards and regulations that apply to manual and automatic doors in relation to accessibility. These include EN 1154, EN 1155, EN 1634, BS 8300, Approved Doc M, CE marking and Declaration of Performance. * cpd@geze.com 025 ( 01543 443000

Free CPD guides to the Green Deal and RHI

Yorkon launches new CPD programme

Mitsubishi Electric has launched two free CPD-certified guides focusing on the Domestic Renewable Heat Incentive (RHI) and the Green Deal. “RHI will help to increase demand for renewable alternatives to traditional heating and the Green Deal is an important part of encouraging households to look at the energy efficiency of their homes,” explains Graham Temple, Marketing Communications Manager. Mitsubishi Electric is certified by the Construction CPD Certification Service and has produced a number of independent Industry Information Guides. * heating@meuk.mee.com ( 01707 282880 026

Off-site construction specialist, Yorkon, a member of the Portakabin Group, has launched a new CPD training programme to help educate architects, contractors, engineers, facilities managers and other building professionals about working with modular construction. The RIBA-accredited seminar looks at how to get the best out of off-site construction and the latest innovations and technical advancements in modular technology. * info@yorkon.com 028 ( 01904 610990

Marvin Architectural clarifies CE certification Marvin windows and doors has been CE certified since 2010 and Marvin Architectural (sole distributors of Marvin products since 1993) will continue to supply CE certified product to the UK and Irish market. The combined experience and expertise of the Marvin Architectural in-house team of window designers, technicians and skilled installers is happy to assist and advise you on your next project and on understanding CE certification. Marvin Architectural also offers a RIBA Approved CPD presentation on “CE Certification and how it Supersedes Existing Testing Procedures when Specifying Windows and Doors”. * sales@marvinuk.com 027 ( 0208 569 8222

RICS Conferences

RICS Legal Issues in Construction Conference 2013 Effective risk management and maximising new contract opportunities

13 November 2013 09:00 – 17:15 CBI, Centre Point Tower 103 New Oxford Street London, WC1A 1DU #RICSconstruction

Book your place 18747 RICS Legal Issues Conference Advert 185x122mm.indd 1

rics.org/legalissues Online 25/09/2013 Enquiry 029 14:27 For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Roofing, Cladding & Insulation

Kemperol delivers a factory finish The advanced chemistry of Kemper System’s innovative Kemperol V210 cold liquid-applied waterproofing membrane will help ensure efficient manufacture of fluorochemicals and fluoropolymer materials thanks to a roof refurbishment project at AGC Chemicals in Lancashire.

GC Chemicals is one of the world’s leading manufacturers of fluorochemicals and fluoropolymer materials, and its production plant not only requires a dry environment on the inside but also needs a durable roof surface on the outside to accommodate regular footfall from maintenance staff.

The concrete slab roofs on two production site buildings at AGC Chemicals had asphalt surfaces that were widely failing with a potential risk of leaking into the building below. This was evident by patches of blistering. Moreover, the seal around a number of redundant roof lights had also failed so AGC opted to refurbish the roofs as part of a general upgrade to the buildings and Kemperol V210, a cold liquid-applied waterproofing membrane from Kemper System, was chosen as a solution that could be applied quickly with minimum remediation to provide a tough, flexible and long lasting surface. Castle Contractors stripped away the existing loose material before making good the failed areas using Kemper System’s ‘D’ Primer to prepare the surface; flooding the areas where the old substrate had been removed with special resins and graded fillers to create an even surface. The contractor then applied Kemper System’s Kemperol V210, a fleece reinforced resin based waterproofing system which cures to create a seamless, elastomeric, membrane that is durable enough to withstand regular footfall from maintenance teams and that also has an effective working life in excess of 25 years. Comments Mark Atherton from Castle Contractors: “The original roof was in a poor state of repair and contained a wide range of roof details, including boxed off redundant roof lights and a brick parapet wall. By using the Kemperol system, we were able to apply a new waterproof membrane with minimal preparation of the existing substrate and could seamlessly apply the new membrane to the exact contours of the details on the roof for excellent leakfree waterproofing integrity.”

■

ACG needed a durable roof surface on the outside to accommodate regular footfall from maintenance staff

enquiries@kempersystem.co.uk ( 01925 445532 030 *

Kemperol V210, a cold liquid-applied waterproofing membrane from Kemper System, was chosen as a solution that could be applied quickly

Castle Contractors stripped away the existing loose material before making good the failed areas using Kemper System’s ‘D’ Primer

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Roofing, Cladding & Insulation

Academy selects screening with style Around 240m2 of screening louvres, manufactured and installed by Maple, are providing an attractive architectural solution for concealing unsightly plant and car park areas at the new £26.3m Waterhead Academy in Oldham. Maple’s versatile louvre system was selected by the project’s main contractor, Willmott Dixon Construction, both for its seamless appearance and also its ease of disassembly. Willmott Dixon’s Construction Manager, Daniel Miller comments: “Whether it’s brise soleil, screening louvres or interior blinds, we know we can always rely on Maple to deliver high quality, cost-effective solutions, on time and on budget, and the company’s products and service for the Waterhead Academy were no exception.” *

jay@maplesunscreening.co.uk

(

0845 384 5000

031

Firestone provides even better coverage Firestone Building Products has announced the appointment of Kevin Mosson as Area Sales Manager covering the South of England. Kevin will be responsible for developing new and existing business through liaison with Firestone’s Authorised and Licensed Contractors, specifiers and architects. Kevin has a wealth of experience in the roofing industry having previously managed his own roofing business for 15 years and has worked closely with architects, contractors and merchants. He comments: “I am delighted to be joining Firestone, one of the industry’s leading manufacturers of single ply roofing membranes and associated products.” *

info@fbpl.co.uk

(

020 8301 8900

032

Fibre cement slates ‘shape up’

Cembrit is offering a bespoke shaped fibre cement slate service for architects looking to apply creativity to their projects. Architects can choose from a range of shapes including bull nose, single and double club, curve and arrow head. The slates are offered at a costeffective price, and Cembrit can also provide advice and projects drawings, all backed up with fast delivery. Cembrit’s fibre cement slate range includes Jutland, Zeeland, Westerland, Moorland and Diamond. Available in five variations of colour and surface, the slates are all complemented by matching ridge, ventilation and verge accessories alongside a full range of fixing products.

sales@cembrit.co.uk ( 020 8301 8900 *

033

Online Enquiry 034 For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Roofing, Cladding & Insulation

A speedy route to compliance On 30th July 2013 the Department for Communities and Local Government issued a directive regarding conservatories and porches and whether they must comply with Building Regulations or whether they are exempt. The decision of whether or not a conservatory or porch extension is exempt is ultimately a matter for Building Control bodies on a case for case basis, taking into account many factors. Regulations demand certain parts of a structure be kept dry and free from damp. In the case of an extension, conservatory or a porch attaching to an existing cavity wall, measures at the roof/wall intersection are necessary to prevent dampness in the external skin above the roofline, from

gravitating downwardly below the roofline where the external skin becomes an internal wall. Preformed Cavitrays for insertion into existing walls arrest permeating dampness from gravitating downwardly and provide a warranted way to satisfy/regularise this particular construction requirement. Of the various types of Cavitray available – some of which have flashings already attached – the Type E for horizontal abutments and the Type X for sloping abutments are

manufactured by Cavity Trays of Yeovil. Both types have been awarded European Technical Approval and LABC product type approval. When constructing an extension, conservatory or porch, approved Cavitrays offer a speedy route to regulation compliance and come with a performance undertaking for the benefit of architect, builder and client. *

(

enquiries@cavitytrays.co.uk 01935 474769

035

Zinc provides lasting colour on Members’ Pavilion Fast track compliance In line with revisions to Part L of the Building Regulations, developers and specifiers are turning to UNILIN Structural Insulated Roof Panels for a fast track and reliable roofing solution compliant with the more stringent legislations. Available in varied thicknesses of insulation, UNILIN Structural Insulated Roof Panels can deliver a U-value in line with the 0.11 W/m2K for new domestic builds set out under the new regulations.With the company’s high-grade precision, UNILIN panels allow tight tolerances to be achieved, reducing margins of error seen in traditional methods of roofing construction and thus improving air tightness. *

(

info.insulation@unilin.com 0032 5673 5091

036

Ettwein Bridges’ design for the £8.2m upgrading of Lords’ Grade II* listed Members’ Pavilion, said to be one of the most celebrated, historic and beautiful buildings in world sport, was completed in April 2005. Following extensive consultations with the MCC, conservation organisations and local authorities, Richardson Roofing undertook construction of a new roof terrace using VMZINC interlocking panel facades and a roll cap roof in QuartzZinc. The 8 years since completion have shown how effectively the zinc has retained its preweathered appearance, proving its suitability for such sensitive refurbishment work. *

vmzinc.uk@umicore.com

(

01992 822288

037

Cladding repainting made easy New water based Cladit Plus from Bradite has been formulated to revitalise metal cladding – the profiled exterior metal finish on industrial and commercial buildings. A water thinned polyurethane semi-gloss acrylic finish for a long lasting protection it provides an easy to maintain finish that offers good colour retention and weathering resistance. Cladit Plus provides an easy to maintain finish that offers excellent colour retention, UV resistance and excellent weathering protection for all types of cladding including steel, galvanised steel and aluminium. Full BS 4800 and RAL Colours including Aluminium are available while specific corporate colours can be specified from Bradite’s massive colour mixing database. *

info@bradite.com

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

(

01248 600315

038

a total solution for architectural glazing

• atriums • facades • canopies • partitions

• rooflights • balustrade • conservatories • walk on floors

• shuffle glazing • framed glazing • structural glazing • frameless glazing

Tel: 01842 816080 sales@glazinginnovations.co.uk www.glazinginnovations.co.uk

Online Enquiry 039 FCA_90x122_2013-05-17.indd 1

Online Enquiry 040

17/05/2013 11:56:38

www.rooflight.co.uk

T: 01670 736124 F: 01670 738080 sales@rooflight.co.uk

Unit 17 South Nelson Rd, South Nelson Industrial Estate, Cramlington, Northumberland, NE23 1WF

With vast experience in the commercial and domestic markets, Rooflight Architectural manufacture and supply lantern lights, pitched glazing, and walk-on rooflights to any size or specification. With thin site lines and availability in any colour, we offer a one stop solution, including technical advice, CAD drawings and nationwide installation.

HR PROF HR HR PROF • Eco Friendly • Clear & Odourless • Water Based • Non Toxic • No Solvents • Apply with Brush or Spray • Euro-class B-s1-d0 • Internal or External Use • HR Prof Also tested to BS 476-6 & BS 476 part 7 HR ProfAlso Alsottested tested estedto BS476-6 476-6& BS476 476 part HR Prof BS &&BS BS 476 part 77 HRProf Prof Also totoBS BS 476-6 part 7 HR Also ttested to 476-6 & 7 HR Prof Also ested to BS 476-6 & BS BS 476 476 part part 7

Lantern Lights Monopitch Rooflights

Walk On Rooflights

Bespoke Rooflights

Online Enquiry 041

Online Enquiry 042

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Floors, Walls & Ceilings

Forbo’s flooring scores highly

Smart flooring products from Forbo have helped create a high quality learning environment

Products from Forbo’s Marmoleum and Sarlon acoustic vinyl ranges have been installed as part of a major development project at Alsop High School in Liverpool, delivering a contemporary finish in keeping with the specialist technology college’s modern ethos.

he project entailed the construction of a new state-ofthe-art facility housing classrooms, a sixth form centre and canteen, and extensive refurbishment of buildings dating back to 1926. With more than 1700 students Alsop High School is the city’s largest secondary school. As architect Martin Shutt of 20/20 Liverpool explained: “With such a high level of foot traffic, the flooring needed to be hard wearing, resilient and cost effective. We used sheet Marmoleum as the main flooring component throughout the upper levels. We’ve used it on many previous projects and knew it would meet these requirements, and it also helped us achieve a smart, modern interior that complements

the building’s contemporary design. “We had strict sustainability targets to meet within the project too,” he added, “and Marmoleum was ideal in this respect, as it is made from natural materials and has a high recycled content.”

Enhanced performance Throughout the ground floor corridors and canteen, Forbo’s Sarlon vinyl was specified in order to achieve the required balance of enhanced slip resistance and acoustic performance. Sarlon Canyon delivers 15dB impact sound reduction, excellent indentation resistance and a slip resistance rating of R10. This range, with its subtle tonal design, is particularly popular within the education sector.

Forbo’s Safestep R12 was installed in the kitchen where there was a need to protect staff from slip hazards associated with food and drink spillages. Safer Osmani, Business Manager at Alsop High School, said: “A fantastic new learning environment has been provided for our students. The focus throughout the project was on creating a high quality facility with a forward-looking interior and the smart flooring products from Forbo have certainly helped us achieve this.”

info.flooring.uk@forbo.com ( 0844 822 3928

* Forbo’s Safestep R12 was installed in the kitchen where there was a need to protect staff from slip hazards

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

043

Floors, Walls & Ceilings

Harmony Collection reflects contemporary woodland trend Kährs’ new Harmony Collection reflects the key trend for rustic natural surfaces with subtle design features.The cost-effective range includes 14 designs, each crafted in Sweden from sustainable European oak and ash. Hand-brushing removes pulpy softwood to expose natural graining and annual rings, which reinforce the natural look. Some designs are bevelled and smoked to add further distinction. Each design from the Collection features Kährs’ ethical, high performance construction. Based on Kährs’ original design, patented in 1941, it uses sustainable hardwood down to the floor’s joint.This method, alongside Kährs Woodloc 5S joint, provides greater stability, promotes fast installation and eliminates gapping throughout the lifetime of the floor. *

044

sales@kahrs.co.uk ( 023 9245 3045

Interface supplies sustainable flooring solution Interface worked with The Co-operative to develop a sustainable flooring design for the company’s new headquarters, Angel Square in Manchester city centre. Interface was chosen to create the flooring design due to its credentials as a worldwide leader in sustainable manufacturing. Interface specified tiles from its Concrete Mix range in a straw shade (Cobble Stone) for use in the main office area, due to its durability in high-traffic areas. Meanwhile Knit One, Purl One tiles were selected for use in formal areas such as the boardroom and business lounge, due to the elegant knitted appearance created by their textured loop pile design. *

interface.uk@interfaceflor.eu

(

045

01274 690690

Laminating history

Abet Laminati has opened a museum to celebrate its 50th anniversary. The displays, at the company’s Bra factory near Milan, are organised chronologically to take the visitor on a historical tour of laminates in design.The museum, designed by architect Matteo Scalise, includes over 137 pieces of art which demonstrate the versatility of high presume laminate. Visitors can study how the results of the dialogue between manufacturer and designer have evolved over time and, as the tour progresses, how they became more imaginative and intricate. It also includes information about Abet Laminati’s culture of research, innovative experimentation and creative concepts. *

(

sales@abet.ltd.uk 020 7473 6915

046

Hembuild systems central to sustainable community Exercising in silence Torshavn gymnasium in the Faroe Islands is a major addition to the existing municipal stadium. Gyms are often cold, echoing and not particularly welcoming places. However, for this project, careful consideration has been given to the function and performance of the room. Instead of being cheerless, it positively encourages activities and social interaction with its warm colours, transparency, tactile materials and comfortable acoustics.To help achieve this, the architects opted to use Troldtekt acoustic panels to create a warm and friendly environment. Apart from the ceilings, they are also used on the walls, such as in the main room where a single row of panels have been spraypainted in situ. *

(

am.carroll@skanda-uk.com 0844 811 4877 047

Hemcrete Projects’ innovative and advanced, low-carbon prefabricated building system, Hembuild, is proving integral to the delivery the first two houses of the Achabeag Township concept – a sustainable community initiative that is located on the picturesque West Coast of Scotland. Developed by the Ardtornish Estate and Roderick James Architects LLP, the Achabeag Township already features two very individual and pioneering designed homes that have been built using the Hembuild wall panel system. Developed to deliver highly sustainable and energy efficient buildings, Hembuild is based around a bio-composite building material made from hemp shiv mixed with a lime-based binder – Tradical Hemcrete.

info@hemcreteprojects.co.uk ( 0845 603 1143

048

Academy keeps the faith A London academy has put its faith in Tarkett after the company expanded its range of vibrant sports flooring colours. Tarkett has extended its Omnisports collection by adding 13 new bright and engaging colours to put functional aesthetics back at the heart of sports centre design. One place already benefiting from the expanded colour range is St Michael’s and All Angels Academy in Camberwell, London. The academy includes a sports hall and gymnasium – fitted with 700m2 of Omnisports Reference in Sky Blue. Omnisports Reference was selected due to its added 6.5mm transparent vinyl wear layer – ideal for a busy school environment where the floor will experience heavy footfall every day. *

uksales@tarkett.com

(

01622 854040

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

049

Floors, Walls & Ceilings

Flooring perfectly shows its age James Latham has bolstered its already extensive solid and engineered Bausen flooring portfolio with the addition of 1757, a contemporary range of ‘aged’ Oak engineered boards with broken edges, a distressed top layer and no bevel. As architects and interior designers in both the commercial and residential sectors look for a real wood flooring option that delivers an instant sense of history and ‘aged charm’ to their projects, 1757 offers the perfect solution. Evocative of old reclaimed floors found in classical French Chateaux, the 1757 range is naturally distressed and every board is hand finished, so that each one is completely unique. Incorporating a generous 6mm wear layer, the 1757 collection comprises five different designs; Charente; which is hand carved and

oiled, supplied in 18 x 220mm, Amboise; which is saw marked, water marked, white washed and oiled and also supplied in 18 x 220mm, Dijon; incorporating a stressed face and edges which is gold stained and supplied in 18 x 190mm, Pontoise Noir; boasting a distressed face and edges which is then smoked and oiled, supplied in 18 x 190mm and Limoges; which offers a distressed face and edges and is oiled and finished in natural white matt, also supplied in 18 x 190mm. In addition, the Limoges, Pontoise Noir and Dijon ranges are all FSC certified. The 1757 range is now available directly

from stock at all nine of James Latham’s panel distribution sites. As well as ‘on-theground’ technical expertise from Latham’s fully trained staff, the company also has a specialist free-phone helpline which customers can call for additional information and advice on flooring matters; 0800 917 7056, plus, James Latham also has a brand new dedicated website for its range of flooring at: www.bausen.co.uk.

(

flooring@lathams.co.uk 01708 681700

050

Safety first at Itec Contract Floors Heradesign Fins a reputation for impeccable performance and by Knauf AMF are With style, the brand new collections of advanced safety from Itec Contract Floors, isafe One and creative to the core flooring isafe Apex, are taking the specification market by Global advertising agency, Bartle Bogle Hegarty London HQ has been redesigned and refurbished from a conventional office layout into an inspiring and welcoming open plan studio space designed for creativity. Visitors to the agency are directed to the central studio on arrival and architects and designers, Urban Salon, wanted to give the area a warm, welcoming feel. Heradesign Superfine acoustic Fins from Knauf AMF, fitted the brief perfectly and were installed under the existing barrel vaulted roof. The vertically suspended Fins were formed using 25mm thick mineral wool panels wrapped around a solid timber board on both sides. *

(

info@knaufamf.co.uk 020 8892 3216

051

storm. Ideal for a whole variety of environments, the safety flooring collections provide low slip potential (36+ rated according to BS 797-2:2002) in both wet and dry environments for complete peace of mind. Proving that safety flooring can be as stylish as it is safe, isafe Apex places emphasis on natural-inspired decors, with a variety of wood and stone styles, whereas isafe One comprises 17 mineral and metal inspired designs that offer a bold, modern look. *

jason.barrett@itecfloors.com ( 0032 5665 3211

052

Yeoman Shield provides long term solution to damage

Yeoman Shield, a market leader in wall and door protection has been supplied and installed at The Sutton Academy, Merseyside.Yeoman Shield HessianEx wall panelling, External Corner Angles and FalmouthEx panels (in Lilac) were fitted on the ground and first floor corridors and also in the plaza and waiting areas. Site manager, Steve Humphreys, explains: “We wanted to stop the need for costly and repetitive re-decoration.Yeoman Shield has provided us with a long term solution and has resulted in many complimentary comments on the improved appearance where Shield products have been installed.” *

sallyann@yeomanshield.com

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

(

0113 279 5854

053

Floors, Walls & Ceilings

UZIN solutions meet demands for hospital renovation UZIN products were used to install safety flooring within the kitchen at the Nottingham City Hospital. The project was extremely complex and very problematic because extensive remedial work was required. With such a complicated and challenging project the flooring contractor chose an UZIN system due to the extensive experience and expertise when working with technical demanding projects. A combination of UZIN PE 460 damp proof membrane, UZIN NC 160 smoothing compound and UZIN RR 201 repair mesh were first used to damp proof and repair the substrate. The safety flooring was then installed using UZIN KR 430 adhesive, which has an EC1 Plus accolade for very low emissions. *

info@uzin.co.uk

(

01788 530080

054

Flooring scores at flagship leisure complex Kährs and Reflex Sports flooring has been specified at Bangor Aurora – an award-winning flagship aquatic and leisure complex, situated in County Down, Northern Ireland.Throughout the complex, over 1825m² of Kährs Maple Activity floor, Multisport Beech and Reflex PROSQUASH was installed by CB Contracts for main contractor, Farrans Construction.The project was specified by Reflex Sports, through AFLS+P. Individual floor installations included the main 8 court sports hall, where Kährs Multisport Beech was specified across 1450m². A further area of Kährs integral Maple Activity flooring was laid throughout the centre’s studio, whilst Reflex PRO-SQUASH was installed throughout the squash courts. *

sales@kahrs.co.uk

(

055

023 9245 3045

Ancon leads the way with CE Marking Ancon has achieved all the necessary welding and factory production control certification to CE-mark its structural steel components, including masonry support systems and windposts, under the EU Construction Products Regulation. From 1st July 2013, all Ancon bespoke structural steelwork has been delivered with a project-specific CE mark, linked directly to a Declaration of Performance, a Factory Production Control (FPC) certificate and a welding certificate. Further information on how CE marking works and which products are involved is available in a free 12-page guide available to download from the Ancon website at www.ancon.co.uk/CE. *

(

info@ancon.co.uk 0114 275 5224

056

Exclusive Contemporary Staircases Characterized By Sleek Minimal Lines

Unit 2 March Street, S9 5DQ, Sheffield 0114 2430259 - info@stairkraft.co.uk - www.stairkraft.co.uk

Online Enquiry 057

Online Enquiry 058

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Doors, Windows & Balustrades

New London office means business for Reynaers Reynaers Aluminium has invested in larger, higher capacity offices in London as a direct response to success in recent years as well as the significant levels of enquiries currently being generated in the area. Having previously operated out of a much smaller office to service its London and Home Counties based clients, this influx of business has seen a need for Reynaers to add further resource and thus further space to their business in order to fulfil the increased demand. Reynaers London Design Office is now situated in The Square, Stockley Park – one of Europe’s premier business parks. The facility within this modern building can house a much larger team, including sales, *

reynaersltd@reynaers.com

(

Kawneer systems bring new hope to university

A variety of glazing systems from architectural aluminium supplier Kawneer have met a host of design and performance criteria for the £14m remodelling of two key buildings at the University of Strathclyde.The company’s latest AA720 HI renovation TIP windows, AA605 mediumduty swing doors and AA100 zone-drained curtain walling with 50mm sightlines and glazed in opening vents have been combined to provide the desired aesthetic of the six-storey Lord Hope building in Glasgow City Centre. Its neighbouring building, Curran features Kawneer’s AA100 curtain walling and latest AA720 tilturn windows on the third and sixth floors and sixth floor respectively. *

(

kuk.kawneer@alcoa.com 01928 502500

technical specialists, marketing and support staff. A further benefit of the move is the additional dedicated presentation and showroom Reynaers has been able to incorporate, which will allow not only innovative product displays, but also an area for networking. Sales Director of Reynaers Aluminium, Paul Duffy, commented: “Concentrating more resource in the London area means we can better serve the architectural

060

practices and design studios in the Capital and Home Counties. “We saw a significant increase in business prior to the London Olympics and this has continued in the aftermath with regeneration projects and new commercial developments gathering pace.” Occupying 150 acres with 25 buildings, Stockley Park accommodates over 165,000m2 of high quality offices, within which are housed a number of blue chip companies.

059

0203 427 3800

Kawneer launches windows blog A “Windows on the world” blog has been launched by glazing systems supplier Kawneer.The manufacturer’s website blog “Windows on the world” delivers design and installation advice on its curtain walling, window, doors and framing systems for specifiers and contractors.Updated constantly, it also contains guidance on regulatory issues such as CE Marking, product launches, case studies and literature updates. A RSS feed gives readers the option to subscribe to be updated automatically and constantly, and far from being one-sided, “Windows on the world” also gives them the opportunity to comment on the content.The blog can be reached via http://www.kawneer.com/kawneer/united_kingdom/en/news/blog.asp. *

kuk.kawneer@alcoa.com ( 01928 502500

061

Kawneer glazing takes silver at Enterprise Zone

HFD Group’s EcoCampus office development, the final phase of development at Hamilton International Park, Scotland’s most successful Enterprise Zone, features glazing systems from leading architectural aluminium supplier Kawneer.The manufacturer’s AA110 zonedrained curtain walling was specified by Mosaic Architecture + Design to achieve narrow 65mm sightlines, with a silver anodised aerofoil cap to create a subtle depth to the facade. Concealed window vents were designed into each bay to provide natural ventilation and Kawneer’s AA110 SSG (Structurally Silicone Glazed) curtain walling was specified at the main entrance and feature stairs to further enhance the quality of design in these public areas. *

kuk.kawneer@alcoa.com

(

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

01928 502500

062

Doors, Windows & Balustrades

Architectural seals reimagined Lorient has unveiled a new and exciting range of contemporary architectural seals under the brand name of AURA. The AURA range embraces a discerning selection of drop seals, perimeter seals, door bottom seals, threshold plates and ramps – all with strong design accents. A number of signature design details feature within the AURA range; including a distinctive curved profile, which not only creates a sophisticated visual aesthetic, but also spreads and diffuses sound. AURA threshold plates and ramps incorporate hardwearing tread strips which deliver greater grip under foot. The unique reversible design provides either a smooth or ridged surface, depending on practical and aesthetic preferences. *

admin@lorientuk.com

(

063

01626 834252

Steel doors for added security Enfield Speciality Doors is now able to offer a range of steel doorsets to its customers. Steel fire doorsets are now available in the following specifications: FD 60 Minute, FD 120 Minute and FD 240 Minute. Steel doors also provide superior protection for security purposes. These range from protection against the casual intruder right up to determined attacks, which may use heavy hand-tools or explosives. Acoustic steel doors are also available to a high specification. There are numerous benefits to steel doors; they are durable but also easy to fit. All steel doors are bespoke made. *

sales@enfielddoors.co.uk

(

Technal publishes test results for FXi65 window Architectural aluminium glazing systems specialist,Technal, has published new test results for its FXi65 parallel opening window – an option in the FXi casement suite for applications where there is a need to ensure the maximum exchange of fresh air with the minimum draught. In independent tests to BS 6375-1, the system achieved class 4 for air permeability, E900 for water tightness, and CE2400 for wind resistance. As with all Technal facade products, this system has been ITT tested for compliance with CE Marking.

info@technal.co.uk ( 01924 232323 *

064

020 8805 6662

065

Bespoke specification for design collaboration

New service office gives GEZE UK a head start GEZE UK, one of the world’s leading manufacturers of door and window control systems, has opened its new London North service office. Based in Leighton Buzzard the service team will support GEZE customers in the area from central London (W,WC, EC postcodes) to Norwich, Oxfordshire and Milton Keynes, offering quotations, technical advice and faster response times.The office opening has created four new jobs, with the Service Manager Troy Collins moving from within GEZE UK to head up the new team. Eight experienced service engineers are also transferring from within the company. *

(

info.uk@geze.com 01543 443000

066

21 Fakro roof windows have been used in a series of low pitch zinc roofs at Loch Arthur, a working community of more than 70 people. Its Farm Shop, designed by Simon Winstanley Architects in collaboration with Denis Chanarin of Camphill Architects, forms part of a series of low wings which are attached to a higher barn-like centre. They echo the appearance of traditional farm buildings with timber-clad walls and zinc standing seam roofs in pre-weathered Quartz-Zinc. The detailed product selection process resulted in specification of Fakro whose FSC accredited windows included fixed closed, electrically and manually operated windows with bespoke flashing to match the mid-grey Quartz-Zinc. *

sales@fakrogb.com ( 0845 021 3030

067

Kawneer’s new estimating software is a real Pro

New estimating software with a built-in structural engineering package that offers fabricators the chance to quickly value-engineer a project has been launched by leading architectural aluminium systems supplier Kawneer. KawneerPro uses proven technology to speed up the estimating process for the company’s curtain walling, window and door fabricators. A comprehensive construction tool, it is designed to produce cross section drawings, quotations, cut optimisation sheets, materials and assembly lists, elevation plans, structural analysis and word processing for creating quotations, order confirmations, bills of quantity and delivery notes. *

kuk.kawneer@alcoa.com

(

01928 502500

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

068

Kitchens, Bedrooms & Bathrooms

Pegler Yorkshire creates a plumbing revolution Plumbing products and systems manufacturer Pegler Yorkshire has launched the unique Tectite Flexible Metal system, a product like no other on the market.Tectite utilises multi-layer composite pipe (MLCP) tubing, which is constructed using a thin layer of aluminium flanked by cross-linked polyethylene, an environmentally friendly, industrial-strength plastic.This offers installers and specifiers the perfect balance between the integrity of metal and the flexibility of plastic. Indeed,Tectite is malleable enough to be shaped by hand, yet it is more resistant to warping than plastic piping, and it can handle temperatures of more than 100°C and working pressures up to 16 bar. *

069

brochures@pegleryorkshire.co.uk ( 0844 243 4400

Trend success leads to new bathrooms collection Following overwhelming success,Trend Interiors has now extended its portfolio to offer a fantastic selection of affordable quality bathrooms in modern finishes and designs that are spot on for today’s market.This exciting new collection offers nothing but simplicity in choice, planning and ordering.With a straightforward choice of colours and finishes that are right on trend, and an easy to use pricing guide that clearly bundles products together to form popular, suggested combinations of units. The range presents modular and fitted arrangements which are supplied rigid and “ready to fit” making them easy to cost, simple to order, and easier for fitters to install. *

info@trendinteriors.co.uk

(

Caledonian Bathroom Pods – excellence as standard

Caledonian Bathroom Pods, a UK market leader in high quality offsite bathrooms, has supplied 194 factory finished units for the new Courtyard by Marriott hotel in Aberdeen.Working closely with ICA Architects of Glasgow and Marriott’s Interior Design Director, Caledonian’s design team developed the specification, performance criteria and finishes for the pods to meet the exacting brand, technical and quality standards required for the new generation Courtyard Hotels. Caledonian also introduced its established UK supply chain to the team which provided further benefits in performance, security of supply and unrivalled warranty and aftercare.

(

070

0800 028 4466

sales@caledonianmodular.com 01636 821645 072

Impey Showers re-engineers the shower seat Impey’s revolutionary new SlimFold shower seat and bench is stylish, surable, safe and functional. It bears weight of up to 40 stone and has a profile of just 111mm when folded. The bench has a profile of 55mm. SlimFold comes in 10 colours and has an RRP of £175 (plus VAT) and can be fitted from heights of 417mm which ensures safe transfer between standing and sitting or from a wheelchair. There is no maximum height restriction. *

(

info@impeyshowers.com 01460 250090

071

Hansgrohe tops the UK charts with WRAS approvals Hansgrohe, the international bathroom specialist, now has over 800 WRAS (Water Regulations Advisory Scheme) approved basin mixers, kitchen mixers, concealed and exposed bath and shower mixers – manual and thermostatic, bath fillers, hand showers and individual shut-off valves and diverter controls. This impressive figure is more than double the number of the next closest bathroom products manufacturer operating in the UK market. WRAS Approval is the best way to demonstrate compliance as it is awarded by representatives of the water suppliers and is therefore accepted by every water supplier in the UK. *

enquiries@hansgrohe.co.uk ( 01372 465655

073

‘Drag and drop’ changing places Clos-o-mat, a provider of disabled toileting solutions, has added a full Changing Places accessible toilet CAD download to its website www.clos-o-mat.com. As a result, specifiers wanting to include the state-of-the-art toilet facility can simply ‘drag and drop’ the complete drawing and specification criteria into their plans. Closo-Mat has further designed the download so that each item within the layout can be individually moved around the space to suit specific project requirements. “The CAD downloads are complemented by a number of relevant white papers, which further give specifiers a quick and easy reference to all appropriate guidelines affecting provision of accessible toilets,” says Robin Tuffley, Clos-o-Mat Marketing Manager. *

info@clos-o-mat.com

(

0161 969 1199

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

074

Online Enquiry 075 wetrooms

wetrooms

M M A A X X X X U U S S the STRONG one

rest ben like bananas d

Avoid tile cracking – MAXXUS takes a 470kg load

wetrooms

www.wetroominnovations.com 01629 815500

wetrooms

wetrooms made easy a winning combination

wetrooms

9 SIZES – LOW PRICES Ask for our 44 page Price List

wetrooms

470kg

wetrooms

Online Enquiry 076

wetrooms

The

wetrooms

Wetroom floor former (trays)

wetrooms

Online Enquiry 077

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

HVAC/HVP 28 or 32mm or at transom. This Sonovent has a glass reduction of 135mm. Sixteen options are on offer though as there are four types, each with four different free area possibilities: Small, Medium, Large and XLarge (with an air slot of 10, 15, 20 or 25mm). This acoustic vent offers a maximum airflow of 26.7 l/m/s at 2 Pa. Equipped with non-combustible mineral wool as noisedamping material, it provides an excellent sound attenuation figure whilst in open position – up to 56dB.

Acoustic window vents for excellent indoor air As a specialist in natural and acoustic ventilation RENSON provides window vents, louvre panels and continuous louvre systems that ventilate buildings and meet the acoustic requirements. The Invisivent EVO AK is a self-regulating thermally broken flap ventilator, that allows you to ventilate your building without any disturbing influence from outside noises. This acoustic version offers a maximum airflow of

12.9 l/s/m at 2 Pa and a sound reduction in open position up to 49dB. RENSON Sonovent is a thermally broken acoustic vent which can be installed on glass which has a thickness of either 20, 24,

(

info@rensonuk.net 01622 754123

078

Atlantic boosts efficiency of University ring main system New Q-Vent HR400 from Johnson & Starley The new Q-Vent HR 400 is the latest heat recovery unit from Johnson & Starley. It complies with Energy Saving Trust’s Best Practice scheme, featuring energy efficient EC fan motors, and a high efficiency counterflow heat exchanger. The Q-Vent 400 is the ideal solution for many local authority, housing association and private residential new build or refurbishment projects. It is designed for vertical wall or loft mounting and manufactured to BS EN ISO 9001:2008. The Q-Vent HR400 is installed in a roof space or cupboard, but most of the system is hidden from view as it has been designed into the house construction. *

marketing@johnsonandstarley.co.uk

(

01604 762881

079

University College London has installed an innovative new boiler plant in its Torrington Place Building. The boiler house, supplied by Atlantic Boilers of Lancashire, operates throughout the year at 95˚C flow and 75˚C return, and contributes to the UCL ring main that serves scores of buildings, large and small. Normally these ring main temperatures do not allow condensing, but the Atlantic RT add-on condensing exchanger leads to year round efficiencies of 92-97% GCV (102-107% NCV). For the UCL ring main, the result is that the Torrington Place boiler plant can lead all other ring main plants running at 95/75˚C and raise the overall efficiency. *

nabeela@atlanticboilers.com

(

0161 621 5960

080

A breath of fresh air to festival marquee Elta Fans has supplied one of its units to ventilate a main marquee at the 2013 Edinburgh International Book Festival. The Kingswinford based manufacturer has supplied one of its Revolution SLC710 fans via its Edinburgh distributor, Systemair Fans & Spares, to keep air constantly circulating throughout the whole marquee.The objective was to create a cooling effect within the structure and hence a comfortable environment for everyone.The SLC710 is just one model from Elta Fans ‘Revolution’ range of long cased axial fans.This Elta model offers good performance, ease of installation and a full accessory range, together with corrosion resistance for a longer life. *

mailbox@eltafans.co.uk

(

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

01384 275800

081

HVAC/HVP

CVO Fire extends energy efficient gas fire range Being energy efficient has grown to be necessary for everyone as it can save you money. Anyone involved in building new homes, offices, schools and the like, or creating new environments, must consider ways to be energy efficient. Here, CVO Fire gives a few options to consider. Flueless Gas Fires are 100% energy efficient with all of the energy supplied being returned to the room as heat. The CVO range includes ‘open flamed’ models in wall mounted, built in or traditional styles. Heat outputs range from 2.4kW to 3.5kW and running costs from only 10p/hour. To achieve 80%+ efficiency, Chimney Gas Fires are a viable option. CVO Fire has recently launched five new, high efficiency gas fires for use with an existing chimney or

flue system. These gas fires are glass fronted and room sealed and are available in various design styles. These fires are perfect for new build or renovations and have heat outputs up to 5kW. Meanwhile, Balanced Flue Gas Fires are 75%+ efficient. These appliances are room sealed and are operated by a concentric flue pipe system. This allows for larger output appliances from 4kW to 14kW. Sizes are available from 400 to 1400mm wide

LUXURIOUSLY WARM

all over the house

Economic, efficient and environmentally friendly, Speedheat’s unique electrical underfloor heating is proven in every respect and is easy to install under any floor finish, in any room or as a primary heating system. The nationwide franchise of highly trained engineers are able to calculate exactly what is needed and provide professional installation and a full back-up service.

COMFORT FROM THE GROUND UP

You will never see us but you’ll always appreciate us! Iona House, Stratford Road, Wicken, Milton Keynes, MK19 6DF Tel 01908 562211 Email: info@speedheat.co.uk www.speedheat.co.uk

Online Enquiry 083

in either front only or double-sided (see through) style. Lastly, for 90% efficiency, Power Flue Gas Fires are perfect for installations where conventional flue systems are not possible. This is because they use 54mm pipes with up to 40m in length and any routing, even under the floor. Many design styles are available. *

(

info@cvo.co.uk 01325 301020

082

apollo monza aluminium column radiator

Modern contemporary aluminium column radiator Ideal for low temperature renewable systems Unique design, half the weight of steel Vertical and horizontal in 40 different sizes 3 days delivery for white, 7 days for colour (46 to choose from)

www.apolloradiators.co.uk Online Enquiry 084

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

HVAC/HVP

Enhanced integration with Baxi BIM library The Baxi Commercial BIM (Building Information Modelling) library provides data enriched 3D models for products and solutions in an extensive portfolio. This enables engineers to select and retrieve product requirements and import models directly into the BIM project on which they are working. As well as dimensions, pipe connections and plant, the Baxi Commercial digital medium attaches product attributes such as outputs, efficiencies, weights, dimensions, in fact all the information necessary to enable a full virtual plant room ‘walk through’. BIM models in the library are also designed to support the commissioning process by helping the engineer to see exactly how an individual product fits into the integrated system along with its performance parameters. The commissioning firm can call up the design details to use virtualisation *

and respected leaders in the commercial building services industry. BIM lends itself exceedingly well to demonstrating how these various technologies may best be integrated. Digital representation should almost totally eliminate compatibility conflicts between the structure and the services, whilst making tendering an exact science rather than educated guesswork. The Baxi Commercial BIM Library can be accessed by visiting http://www. baxicommercial.co.uk/bim/ and completing a simple registration process.

to interpret the design whilst work is in progress, whilst ongoing maintenance and facilities management can be vastly simplified. The Baxi Commercial BIM library covers the extensive range of energy efficient products and system solutions provided by the component brands, Andrews Water Heaters, Potterton Commercial and BaxiSener Tec UK. Concepts such as separated space and water heating, prefabricated packaged plant and integrated Low/ Zero Carbon Solutions have all helped establish these brands as acknowledged

geraldine.clegg@baxicommercialdivision.com

(

085

0845 070 1055

New APS system provides maximum control

Secomak – global specialist in developing engineering solutions for a diverse range of industrial challenges – has launched the latest addition to its Gas Booster range.The new Secomak Automatic Pressure Stabilisation (APS) system provides unrivalled control over energy consumption – and costs – for buildings and facilities managers. The system maintains a constant pressure level – regardless of appliance usage – by allowing the user to set the required outlet pressure for the Gas Booster.The APS system is compatible with the current range of Secomak Gas Boosters and is also available with the Secomak Auto-Changeover system integrated into one, easy to use, wall-mountable box.

Stelrad swings into action Leading radiator manufacturer Stelrad Radiators has introduced its brand new, curved vertical premium panel radiator to the UK market – the Stelrad Swing. The new model is based on Stelrad’s extremely popular Compact Vertex radiator but sees the addition of a one piece, curved steel front cover that gives it a modern and aesthetically pleasing designer feel. It comes in white as standard but can be specially ordered in up to 35 colours, making it an extremely attractive product for interior designers and architects, looking to match radiator colours with corporate or specific colour decor. *

(

info@stelrad.com 0870 849 8056

086

gas-boosters@secomak.com

(

020 8732 1300

087

Faster installation with new Atag Q Series rig

Vent-Axia has made the final shortlist in the prestigious Energy Awards 2013, which recognise companies leading the way in reducing carbon emissions. Vent-Axia’s LoCarbon Kinetic Plus E, Mechanical Ventilation with Heat Recovery (MVHR) system has been selected for the shortlist in the ‘Energy Efficient Product of the Year’ category. The Kinetic Plus E is the best performing MVHR system listed on SAP Appendix Q. It boasts a specific fan power (SFP) as low as 0.4W/l/s, combined with 94% heat recovery, and provides valuable reductions in Dwelling Emission Rates (DER). This year’s Energy Awards will be held on 4th December at the Grosvenor Ball Room, Park Lane. *

jenny.smith@vent-axia.com

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

(

0844 856 0590

088

HVAC/HVP

Home heating controls Solar first for for the internet age Speedheat

2 Save Energy Ltd, manufacturer of the OWL brand of home energy monitors, has just introduced a totally new range of OWL Intuition ‘Smart’ Heating Controls based on its tried and tested wireless technology.With any internet connection home owners can login to OWL’s proprietary software platform. They can then control and adjust their heating and hot water settings with a clear, easy-to-use web dashboard. There are two systems for the installer to fit: one specifically designed for combi boilers and the other for conventional systems. Both systems come with comprehensive and easy-to-follow installation instructions and a downloadable home owner user guide too. *

info@theowl.com

(

089

01256 383430

Xpelair unveils new training centre Xpelair Ventilation Solutions, one of the UK’s leading providers ventilation systems, has opened a new training centre at its Peterborough site following an extensive investment programme.The training centre will be the primary location for the company’s BPEC accredited training scheme, which is an essential qualification for any installer following the reclassification of ventilation installation as ‘notifiable work’ in 2010.The centre will also be used to deliver Xpelair’s comprehensive CPD programmes that are a necessity for architects to maintain their RIBA status and for specifiers to keep abreast of industry developments.The courses discuss ventilation in various environments from residential and industrial, to social and education sectors. *

daniela.martino@redringxpelair.com

(

0844 372 7750

090

A converted Victorian village school has become the first home in the UK to run electrical floor heating from Speedheat by solar power. The fivebedroom family home already benefited from Speedheat underfloor heating throughout under a mix of floor finishes. Now, with a system of roof panels designed by Halo Energy, solar power is making a valuable contribution to the energy used for heating, lighting and running electrical appliances. Speedheat’s advanced thermostat controls are adjustable to suit how and when the family uses the heating to maximise the electricity generated during daylight and keep the house cosy. *

(

info@speedheat.co.uk 01908 562211

091

in + ex ex inThe + in+ex app

for or iPhone, iPad and Android Free download available now ‹‹‹

BROWSE | SPECIFY | SOURCE | DIGEST

Online Enquiry 092

Online Enquiry 093

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Drainage & Landscaping Tower Wharf, right on the Thames, is one of four unique installations for Cityscapes 2013. Since August, a show garden from this year’s RHS Chelsea Flower Show has rematerialised, remixed into four new gardens in the same way as a song might be remixed by different producers. Materials and plants for his latest project come from the Cloudy Bay Discovery Garden, which won Silver-Gilt at the RHS Chelsea Flower Show in May. For his remix, Matthew decided to create and plant out large-scale circular beds raised high at different angles. In correlation to Best Show Garden at Hampton Court Palace, inspired by the principle that water is life and needs to be recovered, he researched the culverts market for the best products to work with. Tubosider easily cut and shaped its products to requirement, creating a structure of five pipes 2600 to 1000mm in in diameter. Installing the whole garden took just two days, right on time for opening. “The culverts worked a treat and make magnificent giant planters!” says Matthew.

Tubosider creates giant planters for South Bank

As one of the UK’s leading manufacturers of steel stormwater tanks, drainage pipes and culverts, Tubosider’s corrugated steel pipes are put to a wide range of uses, but few like this. In a striking extension to its more traditional roles in water management, RHS Gold medal winning designer Matthew Childs has installed a range of Tubosider pipes as an

integral feature of his latest work – an urban Remix Garden on London’s South Bank. Opened on 11th September, Matthew’s garden in the courtyard of the iconic OXO

(

sales@tubosider.co.uk 01744 452900

094

First defense for economical surface water treatment Hydro International’s innovative First Defense vortex separator is now available for the first time in the UK, in response to the growing need for economical surface water treatment on new developments, car parks and highways. First Defense uses a gentle vortex action to remove coarse particles, litter and oil from surface water runoff – a requirement which will become increasingly important as a result of growing regulation for Sustainable Drainage Systems (SuDS) in future. The First Defense has been launched as part of the Hydro StormTrain Series of surface water treatment devices, a comprehensive toolbox for silt, sediment and pollutant removal as part of SuDS.

New lease of life to London gardens Aurubis Architectural’s Nordic Blue Living pre-patinated copper provides material continuity for a range of additions that transform a London public space. Architects BDP recently completed a rejuvenation of Brown Hart Gardens, set within a residential area in the heart of Mayfair, immediately adjacent to Oxford Street. New interventions include a staircase and lift structure, clad in Nordic Blue Living. Planters with concealed lighting are also clad in Nordic Blue Living. Continuing the Gardens’ long tradition of water features, a new bronze reflective pool playfully trickles water down the ribbed bronze back added to an original seat, adding movement and sound. *

(

g.bell@aurubis.com 01875 812144

095

stormtrain@hydro-int.com ( 01275 878371

096

Satisfied builder opts again for Yeoman Rainguard Yeoman Rainguard has been fitted to an impressive house (part of which dates back to the 18th century) as part of a major renovation carried out by Wiltshire based A G Builders.Yeoman Rainguard supplied XL Aluminium 125 x 55mm half round gutter & 75mm diameter downpipe in a special lead grey coloured textured finish. A G Builders’ Director, Barry Gill comments: “We have used Yeoman Rainguard on many different projects (including new build and renovation) and have always been satisfied with its products and prices and the service and advice provided by its area sales manager, Tim Hanks.” *

sallyann@rainguard.co.uk

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

(

0113 279 5854

097

Marine | Rail | Construction | Industry | Leisure

Are there flaws in your plans? Anti Slip • Industrial Flooring • Access Ramps • Walkways • Stair Tread Covers • Bridges

Access Structures • Structural Solid Tops • Non-Slip Plate • Decking Strips • Service Riser Flooring • AHU Platforms

Step On Safety Ltd. 122 Station Road, Lawford, Manningtree, Essex, CO11 2LH

Stair Tread Covers

Service Riser Flooring

AHU Platforms

Fibreglass Grating

01206 396 446 construction@steponsafety.co.uk www.steponsafety.co.uk

Online Enquiry 098

LEVATO MONO, a next generation paver system Pavers comprised of a 20mm single layer of load-bearing porcelain stoneware, with incredible technical and aesthetic features. Selflevelling and height adjustable pedestals allow for rapid installation over uneven sub-surfaces and any waterproof membrane.

• • • • • • • • • • • •

Ideal for roof terraces, balconies and walkways Floating floor – installation over single ply membranes Eternal finish – massive over life savings Zero maintenance Completely non-porous; stain resistant Slip resistance; BS pendulum test up to +65 wet Lightweight – 45kgs per m2 Timber & stone effects – 30+ finishes available High load bearing- static load up to 1 tonne per paver Fire and frost-proof Height adjustable pedestal support system Hidden services with easy access

www.thedecktileco.co.uk

Online Enquiry 099

T: 0845 2700 696 E: info@thedecktileco.co.uk

Online Enquiry 100

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Building Elements Brick Awards, the Architect’s Choice Award. This award is open to any architectural student or practicing registered architect from around the world who can vote for the shortlisted project they believe demonstrates the best architectural use of brick. It will be granted to the project which receives the most votes. Last year, the North London Hospice designed by architects Allford Hall Monaghan Morris received over 80 votes and went on to win the award. An online voting interface has been set up on the BDA’s website and closes mid September. RIBA membership numbers and educational institutional details will be required. Now in its 37th year, anticipation is growing for the BDA Awards which will be presented at London’s Marriott Grosvenor Square Hotel on 14th November. To book tickets and/or tables at the awards, please contact The Brick Development Association. The shortlist can be viewed on the Brick Development Association website, www.brick.org.uk/category/2013-shortlistentries/

Brick Awards 2013 shortlist revealed The Brick Development Association (BDA) has announced the shortlist for the 2013 Brick Awards, one of the top design and construction awards in the country. There are 13 awards split into three categories: housing, building and landscape, and technical and craft. There is also the Supreme Award – the Brick Development *

brick@brick.org.uk

Association Building of the Year, judged to be the best overall project from the 14 award winners. 2012 saw a new category in the annual (

101

020 7323 7030

Two new senior appointments to BBA

Knauf rallies to the BIM revolution Knauf – a leading manufacturer of lightweight building materials and systems – is among the first to make Building Information Modelling (BIM) objects of its products available for download. Knauf’s BIM objects are available in Autodesk’s Revit, the main BIM software format, with 25 key partitioning and walling products being launched at first while others are currently in development. BIM objects ready to be downloaded free of charge from http://www.knauf.co.uk/designsupport/bim include Baseboard, Core Board, Performance Plus and Fire Panel. *

(

kd@web-response.co.uk 01795 424499

102

The BBA has announced two new senior appointments to its management team. Peter Maddern has been promoted to Head of Contractor and System Certification with responsibilities for the BBA’s installer and management system businesses while Fanoula Ziouzia has been promoted to Head of Business Development and Administration. Peter has been with the BBA since 2002 when he initially joined as an inspector for replacement windows. Fanoula Ziouzia has been with the BBA for six years and has worked as a project manager and latterly as a product team leader. *

construction@bba.star.co.uk

(

01923 665300

103

Entry process closes for UK Worker of the Year

The UK Worker of the Year 2013 competition has closed its entry process, leaving organisers of the competition the tough task of narrowing down thousands of entries.The competition, which was launched back in April, received a record number of entries this year, with the standard of applications higher than that of the competition’s previous three years. In the next few weeks, UK Worker of the Year organisers will announce the six lucky entrants that have made it to this year’s final, all of whom will have the chance to win this year’s amazing prize choice – a Suzuki Swift or Suzuki GSR750 motorbike. *

workeroftheyear@chicanemarketing.com

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

(

01761 419419

104

Building Elements

Stormking Plastics improves quality of GRP products Stormking Plastics is a leading UK manufacturer and trade supplier of high quality moulded GRP parts used nationally for residential building construction. The company, which has gained BBA approval for its main product lines, specialises in producing finished GRP parts which are very visible to a home owner. Main entrance canopies and porticos, doors, bay window roofs, dummy chimney stacks, finials and gable ends are all examples of Stormking GRP products specified by UK house builders and installers. As such, the focus of its workforce of over 160 people spread across the three Stormking production sites in Tamworth, Staffordshire, is very much on finish quality and long term product performance. As part of an on-going product innovation and quality improvement programme, Stormking has specified the use of Scott Bader’s CrysticLS 96PA spray

gelcoat in both white and slate grey for all its GRP residential products. The technical team at Stormking selected Crystic LS 96PA spray gelcoat due to a combination of its good handling properties, being a robust filled spray gelcoat which can be evenly applied with an airless spray system, alongside its proven long term weathering performance for UK building applications; for chopped glass reinforced parts Crystic 2.8500PA orthophthalic back up resin is also used. In addition to spray moulding, Stormking also uses vacuum

Foremans supplies new activity space for specialist centre Foremans Relocatable Building Systems, the UK’s largest supplier of refurbished Portakabin buildings, has completed a new facility to meet the increased demand for a specialist charity. FiND2 in Beverley, East Yorkshire, offers day services for young adults with learning disabilities and autism and demand for places is growing. Foremans worked with the charity to help meet its tight budget for new facilities as part of its on-going commitment to supporting local community initiatives. The new scheme has provided an extension to the Belprin Road centre. Features include a kitchen where students who are developing skills they may need for living away from the family home can learn to cook and use household appliances. *

info@foremansbuildings.co.uk

(

01964 544344

106

High performance damp solution Fila’s PW10 offers a safe and permanent solution to tile streaks and stains caused by moisture.The low VOC, solvent-free product is designed for the professional treatment of absorbent materials, including stone and terracotta. Applied to the back of tiles before installation, it permanently stops efflorescence salts, tannin and metals from rising through the substrate to the tile surface, whilst allowing the material to breathe. Offered as part of Fila’s maintenance range, Fila PW10 is suitable for internal and external surfaces, including: natural stone, granite, marble, agglomerates, terracotta and other absorbent materials. It provides high performance protection without altering appearance or forming a surface film.

assisted Resin Transfer Moulding (RTM) in one of its factories. The use of GRP parts is now well accepted and acknowledged by architects, local authorities, specifies, and leading UK developers of residential buildings as a cost effective alternative to using traditional building materials like stone, slate, concrete and timber.

(

composites@scottbader.com 01933 666638

Latest Fire & CO safety guide published Kidde Fyrnetics has published its updated ‘Fire & CO Safety in Housing’ guide, reflecting the new Code of Practice for smoke and heat alarms, as well as imminent and recent regulations demanding CO alarms.The comprehensive 2013 guide aims to help all those involved with housing to understand the very latest requirements for protecting occupants from fire or carbon monoxide poisoning. The new 8-page document is intended for anyone involved with housing – including RSLs and private landlords, housebuilders, developers, architects, surveyors, building control and environmental health officers, electrical contractors and heating installers.

kiddefyr@ukgateway.net ( 01753 685096 *

filauk@filasolutions.com

(

01584 877286

107

105

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

108

Building Elements

Hörmann sectional garage doors gain accreditation

The break in resistance of Hörmann automatic sectional garage doors has been recognised by the award of Secured by Design status. The accreditation applies to the combination of Hörmann insulated or solid timber sectional doors with the Series 3 ProMatic or SupraMatic operators. The double skinned, insulated EPU and LPU doors both feature solid, CFC free polyurethane insulation that adds strength and rigidity to the door.With the EPU door the insulation is 42mm thick at the section joints and 20mm thick across each panel. For the LPU door this insulation is a constant 42mm thick, leading to even better thermal values. The LTH solid timber doors are offered in a number of styles and buyers also have the option to have their own individual design recreated by Hörmann. These doors can be ordered in either Nordic Pine or Hemlock. The ProMatic and SupraMatic operators

which are part of the Secured by Design accreditation both feature a mechanical lock. This unique automatic latching system makes it almost impossible to lever these doors open, and as it is a purely mechanical system, it remains fully functional even in the event of a power failure. An additional security feature of the latest operators is the Hörmann BiSecur system. This two-way communication between the hand transmitter and operator uses FM radio signals that rely on the same 128 bit encryption used for online banking. Not only does this system make the transmitters

more secure but also means that the signal is more reliable while extending operating distances. Another benefit of the system is that it includes a remote status query. A wide range of styles and colours and even bespoke timber designs ensure there are doors to suit any home or project. Additionally matching entrance doors are available including the Hörmann ThermoPro range which also has Secured by Design options. *

(

info@hormann.co.uk 01530 516888

109

One Angel Square alight with latest technologies Record order for school buildings The increasing demand for school places has resulted in a record number of orders over the past year for interim classroom buildings from Portakabin, the UK’s leading modular building manufacturer. In the last 12 months, Portakabin has worked with more than 300 primary and secondary schools and colleges, delivering around 400 interim classroom buildings to accommodate up to 10,000 pupils and students. All interim facilities provided by Portakabin are designed and constructed to permanent standards and in line with the latest Department for Education guidelines for teaching and learning.The buildings incorporate design best practice, current thinking on anti-bullying strategies and generously-sized, light, modern classrooms. * (

information@portakabin.co.uk 110 0845 401 0010

At One Angel Square, Manchester, stands the landmark building that houses the Co-operative Group’s new headquarters. Striking in its architecture, it is an expression of the Co-op’s values and commitment to the environment. The Co-op’s leadership in green architecture is supported by Luxonic Lighting, a leader in quality LED and interior lighting solutions. The UK manufacturer has provided over 11,000 luminaires throughout the office and communal areas in the headquarters.Approximately 8000 of Luxonic’s luminaires used throughout the headquarters are bespoke, designed specifically for One Angel Square to integrate with the chilled beam system in both the office and meeting spaces. *

info@luxonic.co.uk

(

01256 363090

111

First homes must cater for TV savvy generation More than half (52%) of 18-34 year olds in the UK now expect access to a digital TV service as standard in their homes, according to a nationwide survey commissioned by Sky. Only a quarter of those surveyed still consider digital TV services a luxury in their home, and a mere 4% would settle for just terrestrial TV. Brendan Hegarty, Head of Sky Communal TV, comments: “Young people now expect a broader choice of TV programming at their fingertips. It is our job, working together with landlords and property developers, to make sure that future generations of home owners and tenants receive the services they demand.” *

tradeteam@skyhomesteam.co.uk

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

(

08442 410 331

112

Building Elements

BHC Furniture refurbishes NHS England Working to a strict timeframe, BHC Healthcare successfully carried out a project comprising the refurbishment of the offices of NHS London for the restructuring of NHS England. The supply of 480 workstations, full cable management facilities including data and power, monitor arms and CPU holders were required and to remove all existing furniture for recycling. The plan required complete design and supply for the soft

break out areas on each floor. BHC won the contract in early March 2013 with the requirement to fulfil over the Easter Bank Holiday. This allowed for 2-3 weeks to manufacture, design, deliver and complete project manage including the

New Magnum spreader gets ready for work DMMP Limited has announced a new Magnum spreader which has joined the Leicestershire-based company’s stable of expert winter tools and machinery.The new spreader is simple to use, maintain and store so will have a positive impact on the way many organisations deal with ice and snow this winter.The Magnum Poly Insert Spreader sits neatly on the back of a three-quarter or one ton pick-up and effortlessly deals with the issue of spreading salt when ice and snow is expected.The spreader’s unique design has been created to allow easy access and maintenance. The spreader has a capacity of 1.14-1.52m3 and has been designed for simplicity of use. *

info@dmmp.co.uk

(

0845 643 9776

114

KNX members team up for installation A challenging home automation project has seen two members of the KNX UK Association working closely together. Beasons of Dolphinton, Peebleshire was approached to install a KNX home automation system that would help to maximise energy savings and provide lifestyle benefits in a barn conversion.The owners also wanted the flexibility to be able to extend the system into an adjoining cottage and across the property into an equine centre and a garage. Seeing the potential complexity of the project, Beasons called upon the expertise of fellow KNX UK member KNX Consultants, who provided documentation that covered everything needed on site to carry out the installation. *

admin@knxuk.org

(

0845 869 5908

115

removal of the existing furniture. Peter Bright, Managing Director of BHC Furniture comments: “I believe this was our toughest ever project, with time a constant factor, the installation team proved admirable and we managed to finish with time to spare on the Bank holiday Monday. We planned every stage down to the last second there was no room for delay!” All site surveys and accesses were clarified, inclusive of vehicle size, restricted turning & loading/offloading schedules which had to coinside with road closures and a large crane which was being used for window cleaning on an adjacent building.The Method Statement and Risk Assessments were carried out and issued prior to commencement of works. All products were specified, quantities confirmed and orders signed off within 48 hours of the initial meeting. Floor plans were subject to change up to the day of installation. Deliveries incorporated an empty second box system to load redundant furniture whilst removing new furniture from the front box. On completion of emptying the front box this was also utilised for additional redundant furniture and removed from site. *

(

sales@bhcfurniture.co.uk 0207 264 1945

113

Make vision a reality with CANAL

The architectural metalwork master, CANAL, has the knowledge and engineering expertise to transform contemporary design ideas into magnificent metalwork structures that make impressive statements. Using its state-of-the-art production facilities in Nottingham, CANAL manufactures innovations in architectural metalwork, staircases and balustrades, which are installed all over the UK and abroad by its own specialist installation teams; providing the full service from concept to project completion in residential and commercial environments.

canal@canalengineering.co.uk 116 ( 0115 986 6321 *

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Building Elements

BBA introduces CPS scheme for solid wall installers The BBA’s application to operate a competent person selfcertification scheme for the installation of solid wall insulation has been accepted by the Department for Communities and Local Government (DCLG). The scheme covers the installation of internal, external and hybrid insulation systems and is an excellent complement to the BBA’s many Agrément Certificates for solid wall insulation systems. The scheme will mean installers can self-certify that their work complies with Building Regulations without the need for a separate assessment by Building Control. The BBA will issue a certificate to the installer’s customer and advise the relevant Local Authority that the work has taken place. Being part of the scheme means installers can save time through not having to notify local authorities prior to commencement or completion of their work, BBA will notify after completion; save money as they don’t

have to pay a local council or an approved building inspector to check their work; and win more business as they can charge their clients lower prices as there are no building control fees to pay. Membership is voluntary – installers can still use Local Authority Building Control and building inspectors if preferred. As part of the CPS installers are assessed to ensure they meet the level of competence required before they’re registered. Once registered there will be ongoing inspections of their work to make sure the required standards are met. If you become a registered installer and you are also certified by the BBA under the Green Deal for either external wall insulation, internal wall insulation or hybrid wall insulation, then

the assessment of competence and ongoing surveillance is already undertaken by the BBA and no additional inspection is required. The only additional fees are an annual registration fee to cover membership of the scheme and a small charge for each job self-certified and registered through BBA as Building Regulations compliant.

(

cps@bba.star.co.uk 01923 665300

117

3M finishes create shimmering colourful surface effects Helifix presents solution for bowed walls The recently upgraded BowTie HD, from masonry repair specialist Helifix, is the ideal solution to the problem of bulging and unstable building walls. Fully concealed once installed, it rapidly restores structural stabilisation by securing the wall to internal joists or rafters without the need for any unsightly tie bars or pattress plates. Its heavy duty, unique rolled profile with selfcutting end, mechanically connects floor joists or roof timbers. It provides stiffness, generally without the need to install noggins or additional bracing and, once bonded into the masonry, reliably connects the walls to the internal wood frame. *

(

info@helifix.co.uk 020 8735 5200

118

Diversified technology company 3M has announced the launch of its innovative range of colour shift products, enabling designers, artists and architects to produce dazzling effects at a fraction of the cost of authentic dichroic glass or coloured acrylic panels.The new Dichroic Film from 3M is available in Chill and Blaze colours for application to glass, plastic or acrylic surfaces as a visual opaque or decorative graphic. Depending on the application requirement, designers can opt for the film only version – DF-Chill and DF-Blaze – or the adhesive version – DF-A-Chill and DF-A-Blaze – which can also be printed on in order to incorporate logos or designs, if desired. *

innovativefinishes@mmm.com

(

0845 606388

119

Timeguard plugs gap in LED market Timeguard has added new bulkhead designs to its range of exterior LED lighting. The attractive 5W designs emit an even light, thanks to ingenious lens diffusers, that is equivalent to 70W of halogen lighting. Made of tough polycarbonate, the new LED bulkheads are suitable for both courtesy/welcome lighting or security lighting, offering energy savings of 90% over conventional lights. With tens of thousands of energy-guzzling bulkhead lights installed throughout the country, these new Timeguard Robust LED models are opening up huge retrofit market for wholesales and installers. There are two models: a standard on/off bulkhead light and an automatic light with an integral PIR detector. *

csc@timeguard.com

(

020 8452 1112

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

120

Building Elements

HOW WILL YOU EVACUATE SAFELY? If you don’t know the answer then Evac+Chair can supply you with the right solution. Evac+Chair is a universal evacuation solution for smooth stairway descent during an emergency. Single user operation ensures no heavy lifting or manual handling is required during emergency evacuation procedures.

NEW BUDGET OFFER*

FREE COMFY SEAT When you purchase any Evac+Chair Model.

For a limited period only.

CALL NOW: 0845 230 2253

or visit www.evacchair.co.uk

* PLEASE QUOTE ‘COMFY’ TO CLAIM THIS OFFER

RRP.00 £90

PRICE

PROMISE GUARANTEE

SMS: Text HELP to 60066

For a faster response visit www.fca-magazine.com or use the free reader enquiry card

Online Enquiry 121

Optimal insulation. Intelligent design. Perfect synergy. THE PROJECT: to embrace the concept of outdoor living in a detached 1960s property, maximising views of surrounding woodland. THE CHALLENGE: ensuring that energy efficiency was not compromised, and effective security levels were maintained. THE SOLUTION: SDL Akzent plus Wintergarden for the perfect synergy of indoor / outdoor space, SL60 heatinsulated glass system marrying style with performance.

SL60 folding doors with flush floortrack CE marking guarantees 20,000 operations with no visible wear and tear

Akzent plus Wintergarden roof Optimal thermal insulation, with the emphasis on elegant design

Burglar resistance RC2 available 24mm latch bolt lock for optimum burglar protection, for complete peace of mind

Read the full case study now at www.solarlux.co.uk Call 01707 339970 to find your local Solarlux showroom or visit our trading partners ODC Trading Limited, Thames Valley Windows, or Callum Walker Energy Source.

Find us on

ENGINEERED in GERMANY. ENJOYED in THE UK

Online Enquiry 122