TM
Irons & Wedges
TomWishonGolf TECHNOLOGY
catalo g
T h e L e a d i n g n a m e i n C u sT o m CL u b m a k i n g d e s i g n
NEW
979 ss
An Original Game Improvement Investment Cast Stainless Iron Design with High MOI, Progressive Blade Height, Semi-Wide Sole and CNC Milled Face with New usga Scorelines
Irons Specifications – 979ss irons ITEM #
Head
Loft
Lie
Weight
Offset
Heel Height
Blade Length
RH/LH
979-3
3-iron
20°
59°
238g
3.5mm
Sole Angle Toe Height 2° B
50mm
31mm
82mm
RH
979-4
4-iron
23
60
245
3
2
51.5
32
82
RH
979-5
5-iron
26
61
252
2.5
2
53
33
82
RH RH
979-6
6-iron
30
61.5
259
2.5
2.5
55
34
82
979-7
7-iron
34
62
266
2.5
3
56.5
35
82
RH
979-8
8-iron
38
63
273
2
3
57
35.5
82
RH
979-9
9-iron
42
64
280
2
4
58
36.5
82
RH
979-PW
PW
46
64
282
2
5
59
38
82
RH
979-AW
AW
50
64
282
2
5
59
38
82
RH
979-SW
SW
55
64
298
2
11
60
39
82
RH
• Progressive blade height design graduates
through the set from semi-shallow low CG on the long irons to conventional blade height on the short irons for smart set game improvement • CNC milled face with new usga conforming
scorelines delivers enhanced spin
• Semi-Wide, symmetrical width sole design
with face-to-back radius and blunt leading edge achieves the most game improvement for clean, solid contact through all grass/turf conditions • Undercut back cavity combines with semi-
wide sole to keep CG lower for more game improvement launch angle assistance
• Twin Weight Bores allow for a maximum
headweight addition of 15g to satisfy any combination of custom length and shaft weight fitting considerations • Precision investment cast from 431
34
stainless steel for ease in loft/lie bending, finished in a bright satin finish with attractive cosmetic highlights. Available in RH in #3-PW, AW, SW
Head Material:
Lower Cavity Weight Bore:
Investment Cast 431 Stainless Steel
7.5mm diam x 11mm deep
Ferrule Required:
(accepts max 6gram weight)
Yes, any IR ferrule with 13.2mm bottom
Bore Depth: 30mm
OD and 0.370” ID
Bore Diameter: 0.370”
Scorelines:
Sole Width Range:
U-Groove 0.8mm wide x 2.6mm
#3–5 - 20mm/22mm/17.5mm
spacing x 0.35mm deep;
#6–8 - 20.5mm/22.5mm/17.5mm
conforms to new USGA scoreline rule
#9–wedges - 21mm/23mm/18mm
Loft/Lie Bending:
Toe/Heel Leading Edge Radius:
Yes, +/-2° in any direction
#3–8 - 250mm
Hosel Length: 65mm
#9, PW, AW - 275mm
Hosel Weight Bore:
#SW - 300mm
7.5mm diam. x 15mm deep
Face-Back Sole Radius:
(accepts max 9gram weight)
#3–6 - 60mm/50mm #7–AW - 70mm/60mm #SW - 90mm/80mm
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
2nd Weight Bore
Deep undercut back cavity design pushes mass down to lower the Center of Gravity more
Hybrids & Ironheads
TWGT achieves another design breakthrough with the first full set of irons with all milled faces for spin enhancement
35
870 ti The Ultimate in High Performance, High Ball Speed, Supreme Off-Center Hit Forgiveness in Iron Design Today • Forged, CNC Machined, Variable Thickness
Beta-Titanium Face Design increases the ball speed to the highest possible level for an iron design – higher than the 770CFE which proved a high COR iron was possible
• Thinner, Beta-Titanium Face Design allows even
more weight to be removed from the face than is possible with a 6/4 Ti face to be positioned on the toe and heel areas to increase the MOI of the head for even better off-center hit performance • Slightly Oversize Head Shape and Profile
automatically increases the MOI over more traditional iron head sizes to add even more to the off-center hit capability of the 870Ti • 870Ti Face Profile Allows a Larger Face Area
to increase size of the Beta-Ti face and the ability of the face to flex more to offer a higher COR for the highest possible ball velocity in an iron design • Reduced-Offset Hosel Design allows a wider
range of players to benefit from the super high performance design characteristics of the 870Ti
Irons Specifications – 870Ti irons
NEW
ITEM #
Head
Loft
Lie
Weight
Offset
Sole Angle
Toe Hgt.
Heel Hgt.
Blade Length
RH/LH
870-3
3-iron
20°
59°
238g
3.5mm
3°
54mm
32mm
82mm
RH
870-4
4-iron
23
60
245
3.5
3
55
33
82
RH
870-5
5-iron
26.5
61
252
3.5
3
56
33.5
82
RH
870-6
6-iron
30
61.5
259
3
3
57
34
82
RH
870-7
7-iron
34
62
266
3
4
58
34.5
82
RH RH
870-8
8-iron
38
63
273
2.5
4
59
35.5
82
870-9
9-iron
43
64
280
2.5
4
60
36
82
RH
870-PW
PW
48
64
283
2
5
60
37
82
RH
870-AW
AW
52
64
283
2
5
60
37
82
RH
870-SW
SW
56
65
297
2
10
61
38
82
RH
Head/Body Material:
Bore Depth:
Investment Cast, Annealed Hosel,
30mm
17-4 Stainless
Bore Diameter: 0.370” parallel
Face Material:
Sole Width Range at Toe/Heel:
SP700 Forged Beta Titanium
#4-iron: 19mm/15.5mm;
Ferrule Required:
#7-iron: 19.5mm/15.5mm;
Yes, any IR ferrule with 13.2mm bottom OD
PW: 20mm/16mm
Scorelines:
Toe/Heel Leading Edge Radius:
U-Groove; 0.75mm wide X 0.4mm deep X
#4-AW: 275mm Radius
2.6mm spacing, CNC machined
Face to Back Sole Radius:
Loft/Lie Bending:
40mm Toe/50mm Heel
Yes, but we do not recommend bending more than +/-2° for loft or lie Hosel Length: 65mm
• Fully Radiused Sole Grind with Beveled
36
Leading Edge provides the most playability for all levels of golfers from all types of turf conditions
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
870Ti 5-iron
870Ti 5-iron
NEW
870Ti 3-iron is a superb driving iron
Hybrids & Ironheads
870Ti ironheads perform well with S2S White, Gold 85 & Black 85 iron shafts
37
770 CFE Variable Thickness, CNC Machined Forged Face Design Increases the COR and Delivers Incredible Off-Center Hit Performance • High COR Thin Face Design delivers higher ball
speed for more distance • Variable Thickness, CNC Machined Forged
Faces use two different steel alloys through the set to match the face flexing to the loft of each iron in the set • Deep, 3-Side Undercut Back Cavity moves the
CG well back from the face to increase launch angle for high, soft landing shots • High MOI from the 2-Piece Head Construction
adds to the high COR face design to ensure offcenter hit performance you have to experience to believe • Progressive Lower Back Weighting allows
CG to be lower and farther back on the lower loft irons for higher flight, removed on short irons for normal flight
Irons Specifications – 770CFE irons ITEM #
Head
Loft
Lie
Weight
Offset
Sole Angle
Toe Hgt.
Heel Hgt.
Blade Length
770-3
3-iron
21°
59°
239g
5mm
1°
58mm
33mm
82mm
RH/LH RH
770-4
4-iron
24
60
246
5
1.5
59
33.5
82
RH/LH
770-5
5-iron
27
61
253
5
2
60
34
82
RH/LH
770-6
6-iron
31
62
260
4.5
2.5
60
34
82
RH/LH
770-7
7-iron
35
63
267
4
3
60.5
34.5
82
RH/LH
770-8
8-iron
39
63.5
274
4
3.5
61
35.5
82
RH/LH
770-9
9-iron
44
64
281
4
4
62
36
82
RH/LH
770-PW
PW
49
64
283
4
4
62
37
82
RH/LH
770-AW
AW
52
64
283
4
5
62
37
82
RH
770-SW
SW
55
64
297
3
11
63
39
82
RH
Head/Body Material:
Bore Depth:
Investment cast from 17-4 Stainless Steel
30mm; TWGT Weight Bore in all
Face Material:
770 heads for final weighting
#3-7: Carpenter 455 HS Steel;
Bore Diameter:
#8-SW: 17-7 Stainless Steel
0.370” parallel
Ferrule Required:
Sole Width Range:
Yes, IR ferrule with 13.2mm bottom OD
#3-iron: 19mm/16mm;
Scorelines: U-groove; 0.8mm wide X
#6-iron: 21mm/17mm;
2.8mm spacing X 0.4mm deep,
#9-iron: 21mm/17mm
CNC Machined
Toe to Heel Sole Radius:
Loft/Lie Bending:
#3–PW = 350mm; SW = 250mm
Yes, but we do not recommend bending
Face to Back Sole Radius:
more than 2º in any direction
#3–6 = 50mm; #7–9 = 60mm;
Hosel Length:
PW = 70mm; AW = 70mm; SW = 80mm
65mm
38
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
5-iron
Precision CNC milled thin face for higher COR
770CFE
770CFE
5-iron
9-iron
Hybrids & Ironheads
770CFE
39
O/s 752
Irons Specifications – O/s 752 irons
A Totally Unique Oversize, Game Improvement Iron to Allow Clubmakers to Custom Fit the Head Numbers to Compete with the Golf Industry’s Practice of Continually Reducing the Loft of Irons • Each 752 O/S Ironhead is Sold by Loft Number and is shipped with two sole number medallions for the clubmaker or golfer to choose what iron head number they wish to permanently install in the sole • The 752 O/S Custom Ironhead Numbering Concept allows clubmakers to compete more effectively with iron models that are made with very low lofts per ironhead number. Clubmakers have the choice of using the lower sole number medallion on each head to create a more “traditionally lofted set” or to use the higher sole number medallion on each head to custom build a very strong lofted set to compete with the irons that some companies are making with very low lofts • Beveled Leading and Trailing Edge Sole Grind with tour grind face to back sole radius allows fewer “fat shots” and more consistent play from tall grass • Full, Deep Back Cavity Design combines with the slightly oversize head shape to offer a high MOI for better off-center shot forgiveness • Second Weight Bore on Lower Cavity Backpad allows addition of up to 18 grams of weight for the widest possible range in fitting for CG, length, shaft weight and 40 swingweight/MOI matching
ITEM #
Head
Loft
Lie
Weight
Offset
Heel Hgt.
Blade Length
OS752-23
4 or 5-iron
23°
60°
247g
3.5mm
Sole Angle Toe Hgt. 3°
59mm
35.5mm
81mm
RH/LH RH
OS752-27
5 or 6-iron
27
61
254
3
3
59.5
36
81
RH
OS752-31
6 or 7-iron
31
62
261
3
4
60
36.5
81
RH
OS752-35
7 or 8-iron
35
63
268
2.5
4
60.5
37
81
RH
OS752-39
8 or 9-iron
OS752-44 9-iron or PW
39
64
275
2.5
4
61
38
81
RH
44
65
280
2
5
61.5
38.5
81
RH
OS752-49
PW or AW
49
65
280
2
6
61.5
39
81
RH
OS752-54
SW
54
65
295
2
11
62
40
81
RH
Note: Twin Weight Bore Design on each O/S 752 head allows assembly to normal swingweights or MOI ranges for each head number listed for each head model.
Head/Body Material:
Bore Depth:
Investment Cast from
30mm on all 752 O/S ironheads
431 Annealed Stainless Steel
Bore Diameter:
Ferrule Required:
0.370” parallel
Yes, any TWGT IR ferrule with a
Sole Width Range Toe/Heel:
13.2mm bottom OD
#23° loft iron: 18mm/14.5mm;
Scorelines: U-groove
#35° loft iron: 19mm/15.5mm;
Loft/Lie Bending:
#49° loft iron: 20mm/17mm
Yes, but we do not recommend bending
Face to Back Sole Radius:
more than +/-2° loft & lie
#23° – #35° = 50mm;
Hosel Length: 60mm
#39° – #54° = 60mm
O/S 752 Head
Loft
Sole Number Medallions Included
OS752-23
23°
#4 and #5
OS752-27
27°
#5 and #6
OS752-31
31°
#6 and #7
OS752-35
35°
#7 and #8
OS752-39
39°
#8 and #9
OS752-44
44°
#9 and #PW
OS752-49
49°
#PW and #AW
OS752-54
54°
#SW
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
5-iron
O/S 752 5-iron
752 O/S is designed to allow you to choose the iron head number for each club from a choice of two iron numbers
Hybrids & Ironheads
O/S 752
41
752 tc Compact, Traditional Head Shape and Profile in a Deep Cavity Back, Full Game Improvement Iron Design
• Beveled Leading/Trailing Edge Sole with face
to back radius affords fewer ‘fat’ shots and easier play from the rough
Irons Specifications – 752tC irons ITEM #
Head
Loft
Lie
Weight
Offset
Sole Angle
Toe Hgt.
Heel Hgt.
Blade Length
RH/LH
752-3
3-iron
21°
60°
239g
5.5mm
1°
55mm
34mm
79mm
RH/LH
752-4
4-iron
24
60.5
246
5
1
56
34.5
79
RH/LH
752-5
5-iron
27
61
253
4.5
2
57
35.5
79
RH/LH
752-6
6-iron
31
61.5
260
4
2
57.5
36
79
RH/LH
752-7
7-iron
35
62
267
3.5
2
58
36.5
79
RH/LH
752-8
8-iron
39
62.5
274
3.0
3
59
37
79
RH/LH
752-9
9-iron
43
63
281
2.5
3
59.5
37.5
79
RH/LH
752-PW
PW
47
63.5
284
2.5
5
60
38
79
RH/LH
752-AW
AW
52
64
284
2.5
5
61
38.5
79
RH
752-SW
SW
56
65
298
2
12
62
39
79
RH/LH
• Classic, Compact, Traditional Shape and
Profile is blended well with the deep cavity back, full game improvement features on each head • Angled Back Cavity Side Walls for higher MOI
delivers very solid off-center feel performance • Progressive Lower Back Weighting allows CG
to be lower and farther back on the lower loft irons for higher flight, removed on short irons for normal flight • Brilliant, Mirror Polish Finish with matte
finish bead blast back cavity • Set Make Up Available:
RH #3–9, PW, AW, SW LH #3–9, PW, SW
Head/Body Material:
Hosel Length: 60mm
Investment cast from 431 Stainless Steel
Bore Diameter: 0.370” parallel
Ferrule Required:
Sole Width Range:
Yes, any IR ferrule with 13.2mm bottom OD
#3-iron: 17.5/16/13.5;
Scorelines: U-Groove, 0.8mm wide X
#6-iron: 18/16.5/14;
2.8mm spacing X 0.4mm deep
#9-iron: 19.5/18/15
Loft/Lie Bending:
Face to Back Sole Radius:
Yes, but we do not recommend
#3–6 = 50mm; #7–PW = 60mm;
bending more than 3º in any direction
#AW, SW = 70m
Bore Depth:
Toe/Heel Leading Edge Radius:
30mm on all 752TC ironheads;
#3–7 = 300mm;
TWGT Weight Bore in all 752TC heads
#8–SW = 350mm
for final swingweighting
42
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
752TC 6-iron
“The fact that the 752TC irons have been a part of the TWGT original design line since 2005 is sheer proof of how many golfers have been pleased with this design for so long.”
– Matt Mohi, Lead Clubfitter, TWGT
752TC 6-iron
Hybrids & Ironheads
752TC 7-iron
43
560 mc Forged Carbon Steel + CNC Machined Deep Back Cavity for the Highest MOI in a True Forged Iron Design
• A True Design Technology Advancement
– creating the entire back cavity by CNC machining results in a much higher MOI for superb off-center hit performance with the soft feel of a forged carbon steel iron • True Tour Radiused Sole perfectly blends a
face to back sole radius with a heavily radiused leading edge for reducing ‘fat’ shots and more solid impact from the rough • Very Slightly Larger Head Size contributes
to the much higher MOI and more confidence without looking too large • Middle Handicap Players can Benefit
from the 560MC Forging thanks to the combination of deep cavity, high MOI and tour radiused sole • Double Nickel Chrome Satin Plating finish
with glass bead blast highlights makes the 560MC a truly gorgeous iron design
Forged Irons Specifications – 752tC irons ITEM #
Head
Loft
Lie
Weight
Offset
Sole Angle
Toe Hgt.
Heel Hgt.
Blade Length
560-3
3-iron
21°
59°
240g
2.5mm
2°
55mm
30.5mm
82mm
RH/LH RH
560-4
4-iron
24
60
247
2.5
2
56
31
82
RH
560-5
5-iron
27
61
254
2
2
57
32
82
RH
560-6
6-iron
31
61.5
261
2
2
57.5
33
82
RH
560-7
7-iron
35
62
268
2
2
58
34
82
RH
560-8
8-iron
39
63
275
2
3
59
35
82
RH
560-9
9-iron
43
64
282
2
3
59.5
36
82
RH
560-PW
PW
47.5
64
285
1.5
5
60
38
82
RH
560-AW
AW
52
64
285
1.5
5
60
38
82
RH
Head Material:
Bore Depth: 30mm
Forged 1035C Carbon Steel
Bore Diameter: 0.370”
Ferrule Required:
Sole Width Range:
Yes, model #125-IR
#3-iron: 17.5/19.5/14.5;
Scorelines:
#6-iron: 17.5/18.5/14.5;
U-groove; 0.8mm wide X 2.6mm spacing X
#9-iron: 21/18.5/15;
0.4mm deep, CNC Machined
Face to Back Sole Radius:
Loft/Lie Bending:
50mm toe/40mm heel all irons
Yes, +/-2º in any direction
Toe/Heel Leading Edge Radius:
Hosel Length: 60mm
#4–9 iron- 300mm radius
Hosel Weight Bore:
PW, AW- 350mm radius
Yes, 7.5mm dia. x 15mm deep
“Now that the 560’s have been out for a few years, based on the comments of clubmakers and golfers combined with my own feelings from having personally played them for the past three years, I do believe the 560mc is the finest iron model I have ever had the pleasure of designing.”
44
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
–Tom Wishon
•
www.twgolftech.com for Serious Golfers
USGA Conforming scoreline version available!
560MC 5-iron
560MC 5-iron
560MC 5-iron
Hybrids & Ironheads
NEW
45
555 c Soft Feel, Forged Carbon Steel Cavity and Muscleback Classic Design with TWGT Custom Sole Grind
Specifications – 555C irons ITEM #
Head
Loft
Lie
Weight
Offset
Sole Angle
Toe Hgt.
Heel Hgt.
Blade Length
555C
2-iron
18°
58°
232g
3.5mm
1°
52mm
30.5mm
79mm
RH/LH RH
555C
3-iron
21
59
239
3.5
1
53
31
79
RH
555C
4-iron
24
60
246
3
2
54
32
79
RH RH
555C
5-iron
28
61
253
3
2
55
33
79
555C
6-iron
32
61.5
260
2.5
2
56
34
79
RH
555C
7-iron
36
62
267
2.5
2
57
35
79
RH
555C
8-iron
40
63
274
2
3
58
36
79
RH
• A Beautiful, Classic Forged Design created as
555C
9-iron
44
64
281
2
3
59
37
79
RH
a design improvement from the former 550C forged irons
555C
PW
48
64
285
2
4
60
38
79
RH
555C
AW
52
64
284
2
5
60
38
79
RH
555C
SW
55
64
296
2
11
61
39
79
RH
• Full Face to Back Radius Sole with heavily
radiused leading edge to deliver more shotmaking consistency from lies in the fairway and rough • Thin topline, Low Offset and Classic Players’
Shape make the 555C a design admired by all discerning golfers • True Forged from 1035 Soft Carbon
Steel through a 5-step forging process which affords greater production shape/grind consistency • 555C are Designed to Match Perfectly
with the 555M for true custom mixed set makeup • New Satin Nickel Chrome Plating Finish
with glass bead blast highlights, offered in 555C cavity back in #2-PW, AW, SW
46
Forged Irons
Head Material:
Bore Diameter: 0.370” parallel
True Billet Forged from
Sole Width Range:
1035C carbon steel, with
#3-iron: 18.5/17/13.5;
double nickel/chromium electroplating
#6-iron: 18.5/17.5/14.5;
Ferrule Required:
#9-iron: 19.5/19/15.5
Yes, model #125-IR
Face to Back Sole Radius:
Scorelines: U-Groove;
#2–7 = 40mm/30mm;
0.8mm wide x 2.6mm
#8–PW = 50mm/40mm;
Loft/Lie Bending:
#SW = 60mm/50mm
Yes, but we do not recommend bending
Toe/Heel Leading Edge Radius:
more than 4º in any direction
#2–7 = 350mm;
Hosel Weight Bore:
#8–PW = 300mm
Yes, 7.5mm dia X 15mm deep
#SW = 275mm
Bore Depth: 30mm
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
USGA Conforming scoreline version available!
555C 8-iron
555C 6-iron
555C 6-iron
Hybrids & Ironheads
NEW
47
555 m Soft Feel, Forged Carbon Steel Cavity and Muscleback Classic Design with TWGT Custom Sole Grind
• A Beautiful, Classic Forged Design developed
as an improvement from the former 550M forged irons
Forged Irons Specifications – 555M irons ITEM #
Head
Loft
Lie
Weight
Offset
Sole Angle
Toe Hgt.
Heel Hgt.
Blade Length
RH/LH
555M
3-iron
21°
59°
239g
3.5mm
1°
53mm
31mm
78mm
RH
555M
4-iron
24
60
246
3
2
54
32
78
RH
555M
5-iron
28
61
253
3
2
55
33
78
RH
555M
6-iron
32
61.5
260
2.5
2
56
34
78
RH
555M
7-iron
36
62
267
2.5
2
57
35
78
RH
555M
8-iron
40
63
274
2
3
58
36
78
RH
555M
9-iron
44
64
281
2
3
59
37
78
RH
555M
PW
48
64
285
2
4
60
38
78
RH
555M
AW
52
64
284
2
5
60
38
78
RH
555M
SW
55
64
296
2
11
61
39
78
RH
• Full Face to Back Radius Sole with heavily
radiused leading edge to deliver more shotmaking consistency from lies in the fairway and rough • Thin topline, Low Offset and Classic Players’
Shape make the 555M a design admired by all discerning golfers • True Forged from 1035 Soft Carbon Steel
through a 5-step forging process which affords greater production shape/grind consistency • 555M are Designed to Match Perfectly
with the 555C for true custom mixed set makeup • Satin Nickel Chrome Plating Finish with
glass bead blast highlights, offered in 555M muscleback in #2-PW, AW, SW
48
Head Material:
Bore Diameter: 0.370” parallel
True Billet Forged from
Sole Width Range:
1035C carbon steel, with
#3-iron: 16/15.5/12.5;
double nickel/chromium electroplating
#6-iron: 16.5/16/13.5;
Ferrule Required:
#9-iron: 17.5/17/14.5
Yes, model #125-IR
Front to Back Sole Radius:
Scorelines: U-Groove;
#3–7 = 30mm/20mm;
0.8mm wide x 2.6mm
#8–PW = 40mm/30mm;
Loft/Lie Bending:
#SW = 50mm/40mm
Yes, but we do not recommend bending
Toe/Heel Leading Edge Radius:
more than 4º in any direction
#3–7 = 350mm;
Hosel Weight Bore:
#8–PW = 300mm
Yes, 7.5mm dia X 15mm deep
#SW = 275mm
Bore Depth: 30mm
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
USGA Conforming scoreline version available!
555M 6-iron
555M 6-iron
555M 6-iron
Hybrids & Ironheads
NEW
49
PCF
Micro Tour Wedges Specifications – PCF Micro Tour Traditional Sole Wedges
TWGT’s Traditional Sole Wedge Design with Milled Face and Micro-Groove™ Scorelines, Destined to Become a Classic • Traditional Sole, Classic Shape/Profile stands as the finest overall shape and set-up behind the ball in a TWGT original wedge design
Sole Angle*
Toe Height
Heel Height
Blade Length
Sole Width T/H/C
2mm
4°/0°
58.5mm
35mm
80mm
18mm/19mm/14mm
275mm R
RH
2
5/0
59
35.5
80
18/19/14
275
RH/LH
300
2
12/0
59.5
36
80
19/20/14.5
250
RH/LH
300
2
11/0
59.5
36
80
19/20/14.5
250
RH
295
2
8/0
59.5
36
80
19/20/14.5
250
RH
ITEM #
Head
Loft
Lie
Weight Offset
307-48
PW
48°
64°
284g
307-52
AW
52
64
284
307-56
SW
56
64
307-58
SW/LW
58
64
307-60
SW/LW
60
64
*Note: First number is the primary sole angle. Second number is the zero-bounce grind sole on the heel side.
Specifications – PCF Wide Sole Wedges ITEM #
Head
Loft
Lie
306WS-55
SW
55°
64°
300g
60
64
298
306WS-60 SW/LW
Sole Angle
Toe Height
Heel Height
Blade Length
Sole Width T/H/C
2mm
5°
58.5mm
35mm
80mm
18mm/19mm/14mm
275mm R
RH
2
3
59.5
36
80
19/20/14.5
250
RH
Weight Offset
• CNC Milled Face with Micro-Groove™ Scorelines to fully maximize every golfer’s ability to spin the ball. Tests with Trackman™ launch monitor verify a 1000 rpm increase in spin rate compared to typical U-groove scorelines on bead blast face • Zero-Bounce Grind Heel ensures the leading edge remains low to the ground when the face is rolled open for finesse shots • Available in Satin Chrome & Platinum Nickel Plating Finishes, with an assortment of models in LH
PCF Micro Tour Wedges in Platinum Nickel
PCF Micro Tour Wedges in Satin Chrome
Zero Bounce Heel - PCF Micro Tour Wedges
50
Sole Radius RH/LH T/H
CNC Milling with Micro-Groove™ Scorelines
Sole Radius RH/LH T/H
Wide Sole Wedges TWGT Wedge Shafts • TWGT has Created a Pair of Custom Designed Steel
Wedge Shafts For Golfers Who Desire a Custom Flight and Feel Option in Their Wedges
PCF Wide Sole Wedges
Wedges
PCF
• High Flight wedge shaft is designed with a longer
Head Material:
Bore Depth: 35mm
Investment Cast 304 Stainless Steel
Leading Edge:
Ferrule Required: Yes, any iron ferrule
Heavily Radiused Face over to Sole
with 13.2mm bottom OD Scorelines: Micro-Groove™ U-shaped,
tip parallel section to allow a slightly higher, softer landing shot into the green • Knock Down wedge shaft is designed with a very
short parallel tip section to restrict the bending of the tip to allow golfers to hit knock-down shots with a firmer feel on a more driving accurate trajectory
0.6mm x 2.0mm x 0.4mm; CNC Machined Loft/Lie Bending: Yes, +/-4º loft or lie Options & Specifications – Steel Wedge Shafts
Weight Bore: Yes, 7.5mm dia. x 15mm deep
ITEM #
Description
Butt Dia.
605-WG-KD
Knock Down Wedge Shaft
0.580”
0.370”
105g
605-WG-HF
High Flight Wedge Shaft
0.580
0.370
105
Tip Trim
Butt Trim
36”
0”
To length
36
0
To length
Tip Dia. Wgt Length
PCF Wide Sole Wedge in Satin Chrome
PCF Wide Sole Wedge in Platinum Nickel
51
730 cl An Incredibly Popular Full Set Design Expressly for Golfers with an 80mph Swing Speed and lower • A Game Improvement Short Set Concept
designed expressly for golfers with a driver swing speed of under 80mph
set SPECIFICATIONS – 730Cl hybRid iRons/iRons/Wedges iTem #
head
Loft
Lie
Weight
730
5-Hybrid Iron
30°
60°
254g
offset sole angle Face hgt. Toe hgt. heel hgt. blade Length Rh/Lh –1mm
0°
34mm
–
–
78mm
RH
730
6/7-Hybrid Iron
36
61
270
–2
0
37
–
–
78
RH RH
730
8/9-Hybrid Iron
42
62
283
–3
0
43
–
–
78
730-IR-5
5-Iron
30
60
254
4
2
–
53mm
33mm
80
RH
730-IR-6/7
6/7-Iron
36
61
268
3
3
–
55
34
80
RH
730-IR-8/9
8/9-Iron
42
62
282
3
4
–
57
35
80
RH
730
PW
48
63
290
4
0
59
–
–
78
RH
730
DW
54
63
300
4
0
60
–
–
78
RH
• New for 2010 are 730Cl conventional
irons, allowing the slow swing speed golfer to choose between all hybrid body irons or conventional irons to match with the 730 CL woods and wedges BASIC lENGTH ASSEMBlY • Matching new more flexible S2S Ruby lite
graphite shafts for sub-80mph swing speed golfers, in discrete AA and A flexes (Page 75) • loft increments are designed at 6°
between clubs – perfect for slower swing speed golfers to achieve normal 10-12 yard distance increments between each club • Available in RH in 16° driver, 20° and 26°
fairway woods, 30°, 36°, 42° hybrid irons or 30°, 36°, 42° conventional irons, and 48° and 54° wedges
Ferrule Requirements: 730CL Driver - Any WD-Ti; 730CL Fairways/Hybrids/Irons - Any WD-Std; 730CL Wedges - Any IR
26
men’s Length Range
Clubhead
Women’s Length Range
shaft options
hosel bore
Driver
43” – 44”
42” – 43”
S2S Ruby Lite A, AA Wood; 650 A/L Wood
0.335”
Long Fairway
41.5 – 42.5
40.5 – 41.5
S2S Ruby Lite A, AA Wood; 650 A/L Wood
0.335
High Fairway
40 – 41
39.5 – 40.5
S2S Ruby Lite A, AA Wood; 650 A/L Wood
0.335
5-Hybrid Iron
37.5 – 38
36.5 – 37
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
6/7-Hybrid Iron
36.5 – 37
35.5 – 36
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
8/9-Hybrid Iron
35.5 – 36
34.5 – 35
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
5-Iron
37.5 – 38
36.5 – 37
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
6/7-Iron
36.5 – 37
35.5 – 36
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
8/9-Iron
35.5 – 36
34.5 – 35
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
Pitching Wedge
35 – 35.5
34 – 34.5
S2S Ruby Lite A, AA Wedge; 650 A/L Iron
0.370
Dual Wedge
34.5 – 35
33.5 – 34
S2S Ruby Lite A, AA Wedge; 650 A/L Iron
0.370
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
sets
neW new 730CL iron design allows golfers to choose between a hybrid iron (lower images) or conventional iron option (below)
730CL intelligent set delivers more driver distance and more functional distance increments vs conventional set makeup (3 & 4 irons are unhittable for ≤80mph golfers)
1w
1w
3w 5w 7w
Long Fwy
High Fwy
3 X 4 5 X
5i
6 7 8
6/7
9 P
S
STANDARD SET
P
D
730CL SET
8/9
27
Future Pro Heel/Toe Putter Head Available – Item# 255–PTR
Sets
Future Pro Grips Available in 0.500” Core in Regular and Putter Models
Note: Use any fairway wood headcover (pg. 85) for the Future Pro junior driver and any hybrid headcovers for the fairway woodheads
Future Pro Graphite Shafts
Future Pro Steel Shafts
29
future pro Junior set The Future Pro Stainless Steel Clubheads, Graphite and Steel Shafts and Grips Set Quality Standards for Starting Junior Golfers on the Right Path to Playing the Game • Future Pro Stainless Steel Wood and
Ironheads offer a quality alternative to cheap aluminum and zinc heads at a “parent friendly”, economical price • Future Pro Wood and Ironheads are Designed
with TWGT’s Hosel Weight Bore to allow proper weight fitting – Stainless Steel ironheads are easily bent for junior lie and loft fitting • Designed Primarily for Junior Players, Ages
6 to 11, with increased loft to ensure early shotmaking success in the game • Optional Future Pro Steel and Graphite
Shafts allow clubmakers a wider range for shaft fitting and price consideration to the parents
SPECIFICATIONS – FUTURE PRO JUNIOR iRons iTem #
head
Loft
Lie
Weight
offset
sole angle
Rh/Lh
855-5
5-Iron
32°
58°
248g
4mm
2°
RH
855-7
7-Iron
40
60
262
4
2.5
RH
855-9
9-Iron
48
62
276
3
3
RH
855-DW
Dual Wedge
54
62
284
3
7
RH
SPECIFICATIONS – FUTURE PRO JUNIOR gRaPhiTe shaFTs iTem #
model
Flex
Weight
Torque
butt diam.
Tip diam.
Raw Length
swing speed
605-JR-Wood
Wood Shaft
Jr
70g
5.5°
0.500”
0.335”
40”
<50mph
605-JR-Iron
Iron Shaft
Jr
70
5
0.500
0.370
37
<50
SPECIFICATIONS – FUTURE PRO JUNIOR sTeeL shaFTs iTem #
model
Flex
Weight
Torque
butt diam.
Tip diam.
Raw Length
swing speed
605-JR-WD-Steel 605-JR-IR-Steel
Wood Shaft
Jr
90g
3.7°
0.500”
0.335”
40”
<50mph
Iron Shaft
Jr
90
3.3
0.500
0.370
35
<50
Head Material- Woodheads:
loft/lie Bending:
17-4 Stainless Steel
Yes, +/- 2 to 3° in any direction
Head Material- Ironheads:
Bore Depth:
431 Stainless Steel
30mm in both the Wood and Ironheads
Ferrule Required:
Bore Diameter:
Yes, model 124-WD-STD and 124-IR
0.335” Woodheads; 0.370” Ironheads
• Future Pro Dark Blue Finished Stainless
Steel Woodheads Available in #1 (15°), #3 (20°), #5 (25°) • Mirror Polish Stainless Steel Ironheads
28
Available in #5 (32°), #7 (40°), #9 (48°), DW (54°)
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
TM
TomWishonGolf TECHNOLOGY
Compared to all other golf equipment companies, Tom Wishon Golf Technology is a very different company. We’re not like any of the companies whose golf clubs you see selling in standard form, off the rack, in retail golf stores, pro shops and over the internet. We believe all golf clubs should be custom fit to match each one of the 13 different custom fitting specifications to each golfer’s unique combination of size, strength, athletic ability and swing characteristics. We’re also not like any of the companies who sell components. We develop and design every one of our original clubhead, shaft and grip models. From our vast experience in golf club R&D, we possess a far deeper understanding of golf club and fitting performance which we openly share with clubmakers. We are also the only company actively promoting the benefits of custom fitting to consumer golfers. TWGT is committed to creating the highest performing, most innovative clubhead, shaft, and grip designs, backed by the best technical information in the golf industry, to support custom clubmakers who are committed to offering their golfers the very best in professionally custom fit golf clubs. TWGT is proud of our skills and knowledge in golf equipment design and clubfitting technology which continues to achieve a high level of respect in the world golf industry.
around the world. When some of the major PGA’s in the world want their member professionals to know the truth about golf equipment and clubfitting, they come to TWGT. • TWGT remains the only supplier of clubheads, shafts and grips
to clubmakers who continues to make the effort to promote the benefits of professional clubfitting to consumer golfers. We support custom clubmakers to give them tools to grow their businesses more than any other company.
about tWgt
about
With the release of our books, The Search for the Perfect Golf Club, The Search for the Perfect Driver, The Right Sticks, and 12 Myths That Could Wreck Your Golf Game, TWGT continues to make golfers aware of the facts of life about their golf clubs – that professionally custom fit golf clubs are the only way any golfer can hope to play to the best of their ability. Clubmakers who use these books to educate their golfers are experiencing an increase in their fitting business. If you’re not working with TWGT as your clubmaking supplier and clubfitting advisor, you’re missing an opportunity to increase your business by delivering the best performing golf clubs to golfers. as we said, tWGt is a very different golf company.
• More than 60 different golf equipment and golf club technology
firsts in clubhead design, shaft design, and clubfitting technology. • The only designer from the custom clubmaking industry whose
original clubhead designs have been used to win on the PGA Tour, Champions Tour and in Ryder Cup competition. • Author of 9 books and hundreds of magazine articles about golf
equipment technology and professional clubfitting. Two of our books have won the prestigious “Golf Book of the Year” award from the ING, the golf industry’s largest association of golf media professionals. • Advisor in golf equipment and clubfitting technology for the
professional training programs for numerous PGA organizations
tWGt’s r&D Center is the largest and most extensively equipped r&D building in the custom clubmaking industry.
5
Log on to our Websites
“Dear Tom and TWGT Staff, Many thanks for your great customer service and your great products. The people and products of TWGT never ceases to amaze.” – Mark Sparks, msparks@umpd.umd.edu
“I recently was fitted for a set of 770CFE irons. I found the nearest company was Two Rivers Golf near Sacramento, Calif. Anyway, I love the clubs and getting fit by professionals is a much smarter way to buy clubs. Scott and Jim at Two Rivers Golf made the experience for me and my friend Dennis worthwhile. We drove from Utah to Sacramento just for the experience. The quality of the Wishon brand is awesome. We have the clubs, bag, hats and so we will be walking/playing advertisements for your great product.
www.wishongolf.com Our website for custom Clubmakers to keep up to date and order TWGT designs online.
On the Web
Kudos for TWGT
Oh by the way, loved reading your book, ‘The Search for the Perfect Golf Club’”. – Sincerely, Ray
“Tom Wishon is one of the golf industry’s most prolific designers. In the past two decades, he’s fashioned literally hundreds of head designs during stints at Golfsmith and Dynacraft. Firms like these made their mark selling components—heads, shafts and grips— to custom club makers and some club maker wannabes. These days Wishon runs his own company, Tom Wishon Golf Technology (TWGT). His latest iron head, 560MC Forged Carbon Steel, is a forged cavity back with built-in game-improvement properties. Wishon is proud as a papa because, he says, it is the first forged carbon steel iron with the entire back cavity made by CNC machining. Most forged cavity back irons squeeze carbon steel out of the way to form a cavity. But Wishon mills the back of the head to produce a deeper cavity with more weight around it. The payoff is a higher moment of inertia or, in lay terms, a better result for off-center hits. It’s a clever way to deliver a more forgiving forged iron.”
www.twgolftech.com Available to help educate consumers on the benefits and details of TWGT designs.
– By Rob Sauerhaft, Managing Editor/Equipment GOLF Magazine
More testimonials online at: www.wishongolf.com/testimonials.php
Visit TWGT websites frequently for current news about new ways we can help you market your clubmaking business. 91