TM
Drivers & Fairway Woods
TomWishonGolf TECHNOLOGY
catalo g
T h e L e a d i n g n a m e i n C u sT o m CL u b m a k i n g d e s i g n
drivers
Fairway Woods
NEW
959 OL Drivers
919Drivers thi
525Drivers grt
525 f/d 915Drivers cfe fairway Driver
949 mc fairway
In response to demand for a driver with the highest possible COR, TWGT has used its vast face design experience to create the 959OL drivers. The 959OL’s large face area pushes the COR close to 0.900 with a new, triple variable thickness design to enhance off center hit performance. Available in 10.5° and 13° High Launch lofts in RH only, the 959OL is a non-conforming design because of its ultra-high COR
TWGT offers the perfect combination of >5,000 MOI with maximum 0.830 COR face with a forged, variable thickness face design with medium level spin, all in a pleasing head profile shape for the best of all worlds in driver head design. 919THI is offered in the widest range of fitting options in 8°, 9°, 11°, 13°, 15.5°, 10.5° Draw Bias, 10.5° Draw Bias Plus and LH 11°.
With a classic round shape, sound and impact feel that appeals to better players, the 525GRT Drivers are the ideal fit for golfers who desire a more flat, penetrating trajectory to generate more roll after carry. The more forward center of gravity design makes the 525GRT Drivers the lowest spin fitting option among all TWGT driver designs.
For tee shots which demand precise accuracy with distance, the high COR 13° loft 525F/D is a specialty design intended to replace a conventional 3-wood off the tee on tight par-4 and par-5 holes. With its 200cc volume and 40mm face height, the 525F/D should only be used for long second shots off the fairway by skilled players who have no trouble getting the ball well up to fly with lower lofts.
With their 32mm, shallow face height and 0.830 COR face, the 949MC fairway woods are a good fit for golfers who need a little more help getting the ball well up to fly from a normal fairway lie condition with the highest possible ball speed. Ideal set makeup for skilled golfers is the 94914° and 18°, while the combination of the 16.5° and 21.5° for the average golfer is optimal.
page 12
page 16 page 14
For 2010, the stellar performing 915CFE drivers are available in 460cc size Offset 11° and 14° as well as in Left Hand non-offset 11° and 14° lofts. Ideal for golfers who require the most slice reduction in a full round profile shape. Variable thickness, 10-2-3 Beta Titanium forged face allows the 915CFE to deliver outstanding offcenter hit forgiveness. page 17
woods
page 16 page 18
10
Woodhead Model Fitting Selection
Woodhe a d Model Fit ting Selection
special sets
woods
woods
915fairway hl
915fairway f/h
730drivers cl 730 cl fairway
FUTURE PRO
The most shallow face (31mm) fairway woods in TWGT’s original design line, the 919THI possess a more elongated face to back dimension to offer a high MOI and match the 919THI drivers. Designed for golfers who want the highest flight with less effort in getting the ball well up from any lie. Available in RH in 14°, 16.5°, 18° and 21.5° lofts.
Experienced golfers are going to love the classic shape of the new 525GRT fairway woods, combined with a semi-shallow 33mm face height to generate confidence from any fairway lie. A new TWGT face design ensures maximum ball speed to swing speed ratio from a 2-piece investment cast stainless steel design.
Designed as a perfect match to the Offset and LH model 915CFE Drivers as well as the offset model 919THI Driver, the 915HL fairway woods are designed as a full game improvement wood set for golfers who fade/slice the ball and need help getting the ball well up to fly. Offered in RH in #3, 5, 7, 9, 11 and LH in #3, 5, 7.
Each 915F/H clubhead is designed with two TWGT weight bores to allow Clubmakers to customize the length and set makeup for each golfer from full fairway wood length to hybrid wood and hybrid iron lengths. As a hybrid club, the 915F/H is for golfers who prefer the look of a forward face progression as per typical fairway woods.
While intended to match the 730CL driver for swing speeds below 80mph, the 20° and 26° loft 730CL fairway woods can be used by any golfer who likes a slight pear-shape and needs the high launch capability of these two fairway wood designs. Ideal for golfers who struggle to get fairway woods well up in the air to fly from normal fairway grass lies.
The Future Pro woodheads afford junior golfers a high quality, full stainless steel design in high loft options of #1 (15°), #3 (20°) and #5 (25°), perfect for the young beginning golfer. Lighter headweights with a hosel weight bore in each head allows clubmakers to perfectly customize the Future Pro woods to offer the juniors a proper start to the game.
page 22
page 24
The absolute best driver choice for men or women golfers with a swing speed lower than 80mph is the 730CL titanium driver. Available in lofts from 15° to 17° through standard spec (16°) and hand select ordering (15° or 17°), the semi-offset hosel and GRT face design ensure slice/fade correction with a consistent high launch angle.
page 26
page 28
page 20
woods
hybrids
page 25
woods
JR. WOODHEADS
Woodheads
919fairway thi 525 grt fairway
page 26
11
NEW
959 OL
The Highest Possible COR Driver Design for Golfers who Play Purely for Enjoyment. New Triple Variable Thickness Face Design for Incredible Off Center Hit Performance
Drivers Specifications – 959OL Drivers ITEM #
Head
Volume
Loft
Lie
Face Angle
Weight
Bulge
Roll
Face Prog.
RH/LH
959
959-10.5
455cc
10.5°
58°
0 square
198g
13”
GRT
18mm
RH
959
959-High Launch
455cc
13
58
0.5 hook
198
13
GRT
19
RH
Dimensions – 959OL Drivers Head
Face Height
Face Width
Front-Back
Bore Diam.
Hosel OD
Bore Depth
Face Area
MOI Izz
959-10.5
55.5mm
100mm
110mm
0.335”
13.0mm
35mm
5000mm2
4875cm2
959-High Launch
55.5
100
110
0.335
13.0
35
5000
4905
• A brand new ultra-high COR driver design to
meet the demands of the many golfers who requested such a design from TWGT • Full radius round head profile shape with
a symmetrical face profile to allow the face design to approach an ultra-high COR of nearly 0.900 • Symmetrical round face profile enhances
a new triple variable thickness face to offer incredible off center hit performance • Reduced rear body wall thickness sections
Face Material:
Ferrule Required:
SP700 Titanium
Yes, any 13.0mm OD X 0.335” ID
Body Material:
Hand Select Options:
6/4 Titanium
+/- 1° loft, lie, face angle
Face Construction:
+/- 2g headweight
Forged Triple Variable Thickness
Scorelines:
Swingweight Bore:
CNC engraved 0.8mm X 0.35mm
Yes, 7.5mm diam x 15mm deep
to move the center of gravity closer to the face for low spin to combine with the ultra-high COR for maximum distance • The 959OL drivers are non-conforming to the USGA Rule for COR – intended for enjoyment only by golfers who do not play competitive events conducted under the USGA Rules of Golf • Finished in black metallic gloss with satin and contrasting color highlights. 12 Available in 10.5° and 13° lofts in RH
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
Woodheads
New forged, cup face, triple variable thickness face design
959OL drivers Available in April The 959OL does not conform to the USGA rule for COR
13
919 THI
Drivers Specifications – 919THI Drivers
>5000 g-cm2 High MOI, Variable Thickness Face, Designed with a Pleasing, non-Radical Shape 919THI Titanium Drivers Available in the Widest Range of Fitting Options • Elongated face-to-back dimension increases
MOI to >5000 g-cm2 and delivers a more rear CG position for higher launch angle • New, variable thickness face design ensures
the smallest decrease in COR from center to off center hit locations – when you hit the 919THI, you can’t believe how well the face performs • 48mm rear CG location launches the ball on
average, 1/2° to 1° higher than the same loft on the TWGT 915CFE and 525GRT • 5000 g-cm2 MOI based on 45” assembled
length – at shorter lengths, the MOI increases to as high as 5400 g-cm2 (based on 43.5” length) • Finished in ebony metallic gloss with
14
satin highlights. Available in RH in 8°, 9°, 11°, 13° High Launch 15.5° High Launch Plus and 10.5° Draw Bias, 10.5° Draw Bias Plus; LH in 11°
ITEM #
Head
Volume
Loft
Lie
Face Angle
Weight
Bulge
Roll
Face Prog.
RH/LH
919
919-8
460cc
8°
58°
0 square
203g
13”
GRT
17mm
RH
919
919-9
460
9
58
0 square
203
13
GRT
18
RH
919
919-11
460
11
58
0.5 hook
203
13
GRT
19
RH
919
919-10.5-DB
460
10.5
58
1.25 hook
203
13
GRT
19
RH
919
919-10.5-DBP
460
10.5
58
3 hook
203
13
GRT
20
RH
919
919-13-HL
460
13
58
0.5 hook
203
13
GRT
20
RH
919
919-15.5-HLP
460
15.5
58
1 hook
203
13
GRT
21
RH
919
919-11
460
11
58
0.5 hook
203
13
GRT
19
LH
Dimensions – 919THI Drivers Head
Face Height
Face Width
Front-Back
Bore Diam.
Hosel OD
Bore Depth
Face Area
MOI Izz
919-8
53mm
105mm
113mm
0.335”
13mm
35mm
4800mm2
4993cm2
919-9
53
105
113
0.335
13
35
4800
5004
919-11
53
105
113
0.335
13
35
4800
5015
919-10.5-DB
53
105
113
0.335
13
35
4800
5015
919-10.5-DBP
53
105
113
0.335
13
35
4800
5015
919-13-HL
53
105
113
0.335
13
35
4800
5025
919-15.5-HLP
53
105
113
0.335
13
35
4800
5025
919-11
53
105
113
0.335
13
35
4800
5015
Face Material:
Ferrule Required:
SP700 Titanium
Yes, any 13.0mm OD X 0.335” ID
Body Material:
Hand Select Options:
6/4 Titanium
+/- 1° loft, lie, face angle
Face Construction:
+/- 2g headweight
Forged Variable Thickness
Scorelines:
Swingweight Bore:
CNC Engraved 0.8mm X 0.35mm
Yes, 7.5mm diam. X 15mm deep
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
919THI Draw Bias Plus for Greater Slice Reduction.
Woodheads
NEW
Available Feb.
15
525 grt
Specifications – 525GRT Drivers
Drivers Face Material:
ITEM #
Head
525
525-9.5
Volume Loft 460cc
9.5°
58°
Lie Face Angle Weight Bulge Roll Face Prog. RH/LH 0 square
202g
12”
GRT
20mm
RH
525
525-11
460cc
11
58
0.5 closed
202
12
GRT
22
RH
Dimensions – 525GRT Drivers
SP700 Titanium
Head
Face Hgt. Face Wdth. Front-Back Bore Diam. Hosel OD Bore Dpth. Face Area
Body Material:
525-9.5
58mm
107mm
110mm
0.335”
13.0mm
35mm
4850mm2
Featuring a more Forward CG Design for Lower Spin
6/4 Titanium
525-11
58
107
110
0.335
13.0
35
4850
• ‘Tour Style’ 460cc head shape demonstrates
Swingweight Bore:
a pleasing balance of face height, breadth and toe to heel length to also contribute to a high MOI • GRT variable thickness face design ensures
a very high smash factor for mis-hits
Face Construction: Forged + Variable Thickness Yes, 7.5mm x 14mm Ferrule Required: Yes, any TWGT Wood Ti Ferrule Hand Select Options: +1/- 1/2° Loft +/- 1 Lie and Face Angle Scorelines: 0.8mm x 0.3mm deep
525 F/D For use on tight holes where distance with accuracy off the tee is required
Fairway Drivers Face Material: HS350 High Strength Steel Body Material: 17-4 Stainless Steel Face Construction: Forged Cup Face
• At 200cc size with a 39.5mm face height,
the forged, high cup face construction ensures a full 0.830 COR for maximum distance • Designed to be custom built to lengths
between 42” and 43.5” for maximum control and accuracy
Swingweight Bore: Yes, 7.5mm diam x 15mm Ferrule Required: Yes, 7.5mm diam x 15mm Hand Select Options: +/- 1° loft, lie, face angle +/- 2g headweight Scorelines: CNC Machined
16
0.8mm x 0.4mm
Specifications – 525f/D Fairway Drivers ITEM #
Head
525F/D-13D 525-13
Vol.
Loft
Lie Face Angle Wgt. Bulge Roll Face Prog. RH/LH
200cc
13°
58°
0 square
208g
13”
GRT
18mm
Dimensions – 525f/D Fairway Drivers Head 525-13
Face Hgt. Face Wdth. Front-Back Bore Diam. Hosel OD Bore Dpth. 39.5mm
86mm
83mm
0.335”
12.3mm
30mm
RH
Face Material:
Ferrule Required:
10V-2Fe-3Al Titanium
Yes, 13.0 OD x 0.335” ID
Body Material:
Hand Select Options:
6/4 Titanium
+/- 1° loft, lie, face angle
Face Construction:
+/- 2g weight
Forged
Scorelines:
Swingweight Bore:
CNC engraved, 0.8mm x 0.4mm
915CFE Titanium Drivers in Offset and Left Hand Offer High Performance and Full Game Improvement
Yes, 7.5mm x 15mm Specifications – 915CFE Drivers
• Mid- to semi-deep center of gravity
ITEM #
Head
Volume
Loft
Lie
Face Angle
Weight
Bulge
Roll
Face Prog.
RH/LH
915
915-OFF-11
460cc
11°
58°
1 closed
200g
12”
GRT
10mm
RH
915
915-OFF-14
460
14
58
1 closed
200
12
GRT
11
RH
915
915-LH-11
460
11
58
0.5 closed
200
11
GRT
21
LH
915
915-LH-14
460
14
58
0.5 closed
200
11
GRT
21
LH
Dimensions – 915CFE Drivers Head
Volume/Loft
Face Height
Face Width
Front-Back
Bore Diam.
Hosel OD
Bore Depth
Face Area
915 Offset
460/11
58mm
103mm
110mm
0.335”
13mm
30mm
4450mm2
915 Offset
460/14
58
103
110
0.335
13
30
4450
915 LH
460/11
56
110
110
0.335
13
30
4850
915 LH
460/14
56
110
110
0.335
13
30
4850
position offers normal trajectory for each loft and size • Forged beta-titanium cup-face
Woodheads
915 CFE Offset RH and Non-offset LH Drivers
construction increases face deflection away from the geometric center of the face for better ball speed on off-center hits • All 915CFE heads designed with GRT
face to ensure consistent launch angle and off-center hit performance • Longer face to back dimension for
higher MOI contributes to the off center hit forgiveness of the variable thickness beta-titanium face
915CFE Offset 11° and 14° RH models available
915CFE Non-offset 11° and 14° LH models available
17
949 MC Another TWGT Design First – The First Semi-Shallow Face Woods with a 0.830 COR For Distance and High Trajectory Flight
Fairway Woods Specifications – 949MC fairway woods ITEM #
Head
Volume
Loft
Lie
Face Angle
Weight
Bulge
Roll
Face Prog.
RH/LH
949
3-14°
140cc
14°
57°
0 square
208g
13”
GRT-0
16mm
RH
949
4-16.5°
140
16.5
57.5
0 square
213
13
GRT-0
17.5
RH
949
5-18°
140
18
58
0 square
218
14
GRT-0
19
RH
949
7-21.5°
140
21.5
58.5
0 square
228
14
GRT-0
20.5
RH
Dimensions – 949MC fairway woods • Designed by loft for custom fairway wood
set makeup – available in 14°, 16.5°, 18° and 21.5 lofts. Better players can choose the 14° and 18° while less skilled ball strikers can choose the 16.5° and 21.5° lofts to form their fairway wood set makeup
Head
Face Height
Face Width
Front-Back
Bore Diam.
Hosel OD
Face Thick.
3-14°
32mm
90mm
79mm
0.335”
12.3mm
1.6mm
4-16.5°
32
90
79
0.335
12.3
1.6
5-18°
32
90
79
0.335
12.3
1.5
7-21.5°
32
90
79
0.335
12.3
1.5
• Forged cup-face construction is key to
achieving the 0.830 COR for maximum ball speed Face Material:
Ferrule Required:
Forged HS300 High Strength Steel
Yes, any TWGT Wood Standard
Body Material:
Hand Select Options:
• All new custom formulated high strength
17-4 Stainless Steel
+/- 1° loft, lie, face angle
steel alloy forged in an incredible 1.6mm thin face allows the 949MC 32mm face height to still achieve a 0.830 COR
Face Construction:
+/- 2g headweight
Forged Cup Face
Scorelines:
Swingweight Bore:
Laser cut, 0.8mm x 0.25mm
• Semi-shallow 32mm face height ensures a
lower CG for ease in getting the ball well up from all turf conditions
• Tapered crown wall thickness design
Yes, 7.5mm x 14mm
allows more weight to be positioned in the rear center of the body for higher launch angle
18
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
Woodheads 19
919 thi Shallow Face, High MOI, High COR Design for Complete Ease of Total Playability Designed to match the high MOI performance of the popular 919THI Drivers
Fairway Woods Specifications – 919THI fairway woods ITEM #
Head
Volume
Loft
Lie
Face Angle
Weight
Bulge
Roll
Face Prog.
RH/LH
919
3-14°
150cc
14°
57°
0 square
210g
14”
GRT
14mm
RH
919
4-16.5°
145
16.5
57.5
0 square
215
14
GRT
15
RH
919
5-18°
145
18
58
0 square
220
15
GRT
16
RH
919
7-21.5°
140
21.5
58.5
0 square
230
15
GRT
17
RH
Dimensions – 919THI fairway woods Head
Face Height
Face Width
Front-Back
Bore Diam.
Hosel OD
Face Thick. 2.0mm
3-14°
31mm
85mm
87mm
0.335”
12.3mm
4-16.5°
31
85
87
0.335
12.3
2.0
• 31mm Shallow Face Design is ideal for
5-18°
31
85
86
0.335
12.3
1.9
golfers who need help getting the ball up to fly, or golfers who play off very tight fairway lies
7-21.5°
31
85
86
0.335
12.3
1.9
• Elongated Back Design Shape allows
for more rear weighting to increase the MOI and launch angle for high flying trajectory
Face Material:
Ferrule Required:
Carpenter 475 High Strength Steel
Yes, any TWGT Wood Standard
• Reduced Sole Width Reduces the Sole
Body Material:
Hand Select Options:
17-4 Stainless Steel
+/- 1° loft, lie, face angle
Face Construction:
+/- 2g headweight
Forged Cup Face
Scorelines:
Swingweight Bore:
0.8mm X 0.3mm
to Ground Contact for the elongated shape to allow for more consistent, solid contact with the ball • Designed in 14°, 16.5°, 18° and
21.5° Lofts to allow customizing the set makeup – better players may play the 14° and 18° for best results while average to higher handicap golfers are better fit into the 16.5° and 21.5° set makeup
20
Yes, 7.5mm diam. X 15mm deep
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
Woodheads 21
525 grt A Classic, Traditional Profile Combined with a Semi-Shallow Face Height to Deliver High Ball Speed with Ease of Play from all Lies • Classic, Traditional Profile Shape sits
perfectly behind the ball for superb appearance and full confidence for the golfer • Semi-Shallow 32mm Face Height Keeps
CG Low for ease of hitting the ball high from all fairway lie conditions
Fairway Woods
Specifications – 525GRT fairway woods ITEM #
Head
Volume
Loft
Lie
Face Angle
Weight
Bulge
Roll
Face Prog.
RH/LH
525
3-14°
145cc
14°
57.5°
0 square
206g
13”
GRT-20
15mm
RH
525
4-16.5
145
16.5
58
0 square
211
14
GRT-20
16
RH
525
5-18
140
18
58.5
0 square
213
15
GRT-20
17
RH
525
7-21.5
140
21.5
59
0 square
222
16
GRT-20
19
RH
Dimensions – 525GRT fairway woods Head
Face Height
Face Width
Front-Back
Bore Diam.
Hosel OD
Bore Depth
Face Thick.
3-14
32mm
86mm
76mm
0.335”
12.3mm
30mm
2.5mm VT
4-16.5
32
86
76
0.335
12.3
30
2.5mm VT
5-18
32
86
76
0.335
12.3
30
2.5mm VT
7-21.5
32.5
86
76
0.335
12.3
30
2.5mm VT
• New TWGT Variable Thickness Investment
Cast Face proves that a high smash factor can be achieved in a cast 17-4 stainless steel clubhead design • A Perfect Design Match to the Classic
525GRT Drivers for players who demand the most traditional, full round profile in their woodhead models • A Second, Sole Located Weight Bore to
allow custom fitting to a very wide variety of lengths with any shaft weight
Face Material:
Ferrule Required:
17-4 Stainless Steel
Yes, any TWGT Wood Standard with
Body Material:
12.3mm bottom OD
Investment Cast 17-4 Stainless Steel
Hand Select Options for Loft:
Face Construction:
+/- 1° from each head model’s loft specification
Investment Cast Variable Thickness
Hand Select Options for Face Angle:
Swingweight Bore:
+/- 1° from each head model’s specification
#1 – Hosel Weight Bore – 7.5mm X 15mm
Hand Select Options for Headweight:
#2 – Sole Weight Bore – 7.5 mm X 15mm
+/- 2g from each head model’s specification Scorelines:
• Lighter headweights in 18° & 21°
heads allows assembly to longer lengths if desired
22
Cast, 0.8mm width X 0.4mm depth
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
face, you can’t believe how hot the face plays and feels.” – Dave Christenson, Rochester, MN
Woodheads
“For an investment cast 17-4 stainless steel
2nd Weight Bore
23
915 hl
Fairway Woods Specifications – 915HL fairway woods
Full Game Improvement with Semi-Offset Hosel, Semi-Shallow Face in 3-wood through 11-wood • Full Game Improvement Design for golfers
who need help getting the ball well up to fly • Semi-Offset Hosel provides slice
correction without looking too offset in the address position • Semi-Shallow Face Height keeps CG low and
ITEM #
Head
Volume
Loft
915HL–3
3–HL
150cc
15°
915HL–5
5–HL
150
18.5
915HL–7
7–HL
145
22
915HL–9
9–HL
140
915HL–11
11–HL
135
Lie
Face Angle
Weight
Bulge
Roll
Face Prog.
RH/LH
57°
0.5° hook
206g
12”
18”
8mm
RH/LH
57.5
0.5° hook
216
12
18”
8.5
RH/LH
58
0 square
226
12
18”
9
RH/LH
25.5
58.5
0 square
231
14
18”
9.5
RH
28.5
59
0 square
236
14
18”
10
RH
Dimensions – 915HL fairway woods Head
Face Height
Face Width
Front-Back
Bore Diam.
Hosel OD
Bore Depth
Face Thick.
3–HL
34mm
88mm
85mm
0.335”
12.3mm
28mm
2.5mm
5–HL
34
88
84
0.335
12.3
28
2.5
7–HL
34
88
83
0.335
12.3
28
2.4
9–HL
34
88
82
0.335
12.3
28
2.4
11–HL
34
88
81
0.335
12.3
28
2.4
inspires confidence to hit the ball high • Designed to Match with 915CFE
Offset and 915CFE Non-offset Left Hand Drivers
Face Material: 15-5 Stainless Steel
Ferrule Required: Yes, any TWGT wood standard
Body Material: 15-5 Stainless Steel
with 12.3mm bottom OD
Face Construction: Investment Cast
Hand Select Options:
Swingweight Bore: Yes
+/- 1° loft, lie, face angle +/- 2g weight Scorelines: 0.8mm wide x 0.4mm deep
24
RH and LH Available
Fairway Hybrids
Specifications – 915F/H fairway hybrids ITEM #
Head
Volume
Loft
Lie
Face Angle
Weight
Bulge
Roll
Face Prog.
RH/LH
915F/H–13
13°
130cc
13°
57°
0 square
208g
14”
GRT
14mm
RH
915F/H–16
16
130
16
57.5
0 square
213
14
GRT
15
RH
915F/H–18.5
18.5
130
18.5
58
0 square
218
15
GRT
16
RH
915F/H–21
21
130
21
58.5
0 square
228
15
GRT
17
RH
915F/H–25
25
130
25
61.5
0 square
232
15
GRT
17
RH
Dimensions – 915F/H fairway hybrids Head
Face Height
Face Width
Front-Back
Bore Diam.
Hosel OD
Bore Depth
Face Thick.
13°
33mm
88mm
71mm
0.335”
12.3mm
28mm
Variable
16
33
88
71
0.335
12.3
28
Variable
18.5
33
88
71
0.335
12.3
28
Variable
21
33
88
71
0.335
12.3
28
Variable
25
33
88
71
0.335
12.3
28
Variable
Face Material: 17-4 Stainless Steel
Ferrule Required: Yes, any TWGT wood
Body Material: 17-4 Stainless Steel
standard with 12.3mm bottom OD
Face Construction: Investment Cast Variable
Hand Select Options:
Swingweight Bore: Yes, 7.5mm diam. x 14mm
+/- 1° loft, lie, face angle +/- 2g weight
915F/H Allows Custom Fitting for Fairway Wood or Hybrid Club Lengths • 915F/H Offers Two Weight Bores to
enable assembly within a 3” difference for fairway wood or hybrid club lengths • Full Forward Face Progression design
offers the option of a hybrid club that sets up with the look of a fairway wood
Woodheads
915 f/h
• Narrow Sole to Turf Design allows less
contact between sole and turf for more consistency from fairway or rough conditions • Semi-Shallow 33mm Face Height is
matched perfectly to the head shape for lower CG and ease of play from any lie condition
2nd Weight Bore
Scorelines: 0.8mm x 0.4mm deep
25
730 cl
set SPECIFICATIONS – 730Cl dRiVeR
An Incredibly Popular Full Set Design Expressly for Golfers with an 80mph Swing Speed and lower • A Game Improvement Short Set Concept
designed expressly for golfers with a driver swing speed of under 80mph • New for 2010 are 730Cl conventional
irons, allowing the slow swing speed golfer to choose between all hybrid body irons or conventional irons to match with the 730 CL woods and wedges
iTem #
head
Volume
Loft
Lie
Face angle
Weight
bulge
Roll
Face Prog.
Rh/Lh
730-1
1-400
400cc
16°
56°
1 closed
205g
13”
GRT
17.5mm
RH
DIMENSIONS – 730Cl dRiVeR head
Face height
Face Width
Front-back
bore diam.
hosel od
Face area
1-400
56mm
102mm
106mm
0.335”
13.0mm
4500mm2
SPECIFICATIONS – 730Cl FaiRWay Woods iTem #
head
Volume
Loft
Lie
Face angle
Weight
bulge
Roll
Face Prog.
Rh/Lh
730
LONG Fairway
130cc
20°
56°
0.5 closed
218g
14”
0 Roll
12mm
RH
730
HIGH Fairway
125
26
57
0.5 closed
228
16
0 Roll
12
RH
DIMENSIONS – 730Cl FaiRWay Woods head
Face height
Face Width
Front-back
bore diam.
hosel od
Face area
LONG Fairway
32.5mm
84mm
64mm
0.335”
12.3mm
2150mm2
HIGH Fairway
32.5
82
61
0.335
12.3
2100
• Matching new more flexible S2S Ruby lite
graphite shafts for sub-80mph swing speed golfers, in discrete AA and A flexes (Page 75) • loft increments are designed at 6°
between clubs – perfect for slower swing speed golfers to achieve normal 10-12 yard distance increments between each club • Available in RH in 16° driver, 20° and 26°
fairway woods, 30°, 36°, 42° hybrid irons or 30°, 36°, 42° conventional irons, and 48° and 54° wedges
Ferrule Requirements: 730CL Driver - Any WD-Ti; 730CL Fairways/Hybrids/Irons - Any WD-Std; 730CL Wedges - Any IR
26
BASIC lENGTH ASSEMBlY men’s Length Range
Clubhead
Women’s Length Range
shaft options
hosel bore
Driver
43” – 44”
42” – 43”
S2S Ruby Lite A, AA Wood; 650 A/L Wood
0.335”
Long Fairway
41.5 – 42.5
40.5 – 41.5
S2S Ruby Lite A, AA Wood; 650 A/L Wood
0.335
High Fairway
40 – 41
39.5 – 40.5
S2S Ruby Lite A, AA Wood; 650 A/L Wood
0.335
5-Hybrid Iron
37.5 – 38
36.5 – 37
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
6/7-Hybrid Iron
36.5 – 37
35.5 – 36
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
8/9-Hybrid Iron
35.5 – 36
34.5 – 35
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
5-Iron
37.5 – 38
36.5 – 37
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
6/7-Iron
36.5 – 37
35.5 – 36
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
8/9-Iron
35.5 – 36
34.5 – 35
S2S Ruby Lite A, AA Iron; S2S White Hybrid AA
0.335
Pitching Wedge
35 – 35.5
34 – 34.5
S2S Ruby Lite A, AA Wedge; 650 A/L Iron
0.370
Dual Wedge
34.5 – 35
33.5 – 34
S2S Ruby Lite A, AA Wedge; 650 A/L Iron
0.370
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
sets
neW 730CL intelligent set delivers more driver distance and more functional distance increments vs conventional set makeup (3 & 4 irons are unhittable for ≤80mph golfers)
1w
1w
3w 5w 7w
Long Fwy
High Fwy
3 X 4 5 X
5i
6 7 8
6/7
9 P
S
STANDARD SET
P
D
730CL SET
8/9
27
future pro Junior set The Future Pro Stainless Steel Clubheads, Graphite and Steel Shafts and Grips Set Quality Standards for Starting Junior Golfers on the Right Path to Playing the Game • Future Pro Stainless Steel Wood and
Ironheads offer a quality alternative to cheap aluminum and zinc heads at a “parent friendly”, economical price • Future Pro Wood and Ironheads are Designed
with TWGT’s Hosel Weight Bore to allow proper weight fitting – Stainless Steel ironheads are easily bent for junior lie and loft fitting • Designed Primarily for Junior Players, Ages
6 to 11, with increased loft to ensure early shotmaking success in the game
SPECIFICATIONS – FUTURE PRO JUNIOR Woodheads iTem #
head
Volume
Loft
Lie
Face angle
Weight
bulge
Roll
805-1
Driver
250cc
15°
52°
0.5 hook
195g
12”
15”
Rh/Lh RH
805-3
3-wood
130
20
53
0.5 hook
204
14
16
RH
805-5
5-wood
130
25
54
0.5 hook
213
14
16
RH
SPECIFICATIONS – FUTURE PRO JUNIOR gRaPhiTe shaFTs iTem #
model
Flex
Weight
Torque
butt diam.
Tip diam.
Raw Length
swing speed
605-JR-Wood
Wood Shaft
Jr
70g
5.5°
0.500”
0.335”
40”
<50mph
605-JR-Iron
Iron Shaft
Jr
70
5
0.500
0.370
37
<50
SPECIFICATIONS – FUTURE PRO JUNIOR sTeeL shaFTs iTem #
model
Flex
Weight
Torque
butt diam.
Tip diam.
Raw Length
swing speed
605-JR-WD-Steel
Wood Shaft
Jr
90g
3.7°
0.500”
0.335”
40”
<50mph
605-JR-IR-Steel
Iron Shaft
Jr
90
3.3
0.500
0.370
35
<50
• Optional Future Pro Steel and Graphite
Shafts allow clubmakers a wider range for shaft fitting and price consideration to the parents • Future Pro Dark Blue Finished Stainless
Steel Woodheads Available in #1 (15°), #3 (20°), #5 (25°)
Head Material- Woodheads:
loft/lie Bending:
17-4 Stainless Steel
Yes, +/- 2 to 3° in any direction
Head Material- Ironheads:
Bore Depth:
431 Stainless Steel
30mm in both the Wood and Ironheads
Ferrule Required:
Bore Diameter:
Yes, model 124-WD-STD and 124-IR
0.335” Woodheads; 0.370” Ironheads
• Mirror Polish Stainless Steel Ironheads
28
Available in #5 (32°), #7 (40°), #9 (48°), DW (54°)
800.470.0072
•
www.wishongolf.com for Serious Clubmakers
•
www.twgolftech.com for Serious Golfers
sets
Future Pro Grips available in 0.500â&#x20AC;? Core in regular and Putter models
note: use any fairway wood headcover for the Future Pro junior driver and any hybrid headcovers for the fairway woodheads
Future Pro Graphite Shafts
Future Pro Steel Shafts
29
TM
TomWishonGolf TECHNOLOGY
Compared to all other golf equipment companies, Tom Wishon Golf Technology is a very different company. We’re not like any of the companies whose golf clubs you see selling in standard form, off the rack, in retail golf stores, pro shops and over the internet. We believe all golf clubs should be custom fit to match each one of the 13 different custom fitting specifications to each golfer’s unique combination of size, strength, athletic ability and swing characteristics. We’re also not like any of the companies who sell components. We develop and design every one of our original clubhead, shaft and grip models. From our vast experience in golf club R&D, we possess a far deeper understanding of golf club and fitting performance which we openly share with clubmakers. We are also the only company actively promoting the benefits of custom fitting to consumer golfers. TWGT is committed to creating the highest performing, most innovative clubhead, shaft, and grip designs, backed by the best technical information in the golf industry, to support custom clubmakers who are committed to offering their golfers the very best in professionally custom fit golf clubs. TWGT is proud of our skills and knowledge in golf equipment design and clubfitting technology which continues to achieve a high level of respect in the world golf industry.
around the world. When some of the major PGA’s in the world want their member professionals to know the truth about golf equipment and clubfitting, they come to TWGT. • TWGT remains the only supplier of clubheads, shafts and grips
to clubmakers who continues to make the effort to promote the benefits of professional clubfitting to consumer golfers. We support custom clubmakers to give them tools to grow their businesses more than any other company.
About TWGT
About
With the release of our books, The Search for the Perfect Golf Club, The Search for the Perfect Driver, The Right Sticks, and 12 Myths That Could Wreck Your Golf Game, TWGT continues to make golfers aware of the facts of life about their golf clubs – that professionally custom fit golf clubs are the only way any golfer can hope to play to the best of their ability. Clubmakers who use these books to educate their golfers are experiencing an increase in their fitting business. If you’re not working with TWGT as your clubmaking supplier and clubfitting advisor, you’re missing an opportunity to increase your business by delivering the best performing golf clubs to golfers. As we said, TWGT is a very different golf company.
• More than 60 different golf equipment and golf club technology
firsts in clubhead design, shaft design, and clubfitting technology. • The only designer from the custom clubmaking industry whose
original clubhead designs have been used to win on the PGA Tour, Champions Tour and in Ryder Cup competition. • Author of 9 books and hundreds of magazine articles about golf
equipment technology and professional clubfitting. Two of our books have won the prestigious “Golf Book of the Year” award from the ING, the golf industry’s largest association of golf media professionals. • Advisor in golf equipment and clubfitting technology for the
professional training programs for numerous PGA organizations
TWGT’s R&D Center is the largest and most extensively equipped R&D building in the custom clubmaking industry.
5
TM
THE LEADING NAME IN CUSTOM CLUBMAKING DESIGN
TomWishonGolf TECHNOLOGY
TWGT DESIGNS ARE AVAILABLE FROM: USA, CANADA, UK & Europe
EUROPE FRANCOPHONE
Malaysia/Singapore
Tom Wishon Golf Technology
Golf N Swing
JNG Malaysia SDN BHD
Tel: 800-470-0072 (U.S. & Canada)
10/14 Avenue General LeClerc
No. 1; Jalan 3/116D
Tel: 970-375-0411 (All other countries)
78230 Le Pecq (France)
Kuchai Entrepreneurs Park
M-F, 8am to 5pm, (MST/MDT)
Tel: 33 139 161 860
Kuala Lumpur, Malaysia 58200
www.wishongolf.com
Web: www.golfnswing.com
Tel: (60) 37 980 0284
Email: golfnswing@gmail.com
www.jnggolf.com
AUSTRALIA Clubmate Golf Australia Pty. Ltd. Golf Club Components 1/32 Redgum Place Byron Bay, NSW, Australia Tel: 61-2-6685 4900 Fax: 61-2-6685 4977 www.clubmate-golf.com.au
email: nathan@jnggolf.com
UNITED KINGDOM Diamond Golf International, Ltd.
South Africa
U4/U5 Rudford Estate
Golf Science Pty Ltd
Ford Road, Arundel
Unit 6, Highway Park
West Sussex, BN18 0BF, England
Northgate Estate, Brooklyn
Tel: (0) 1903-726 999
Western Cape, South Africa 7405
email: sales@diamondgolf.co.uk
Tel: (27) 21 511 9066
email: info@clubmate-golf.com.au
EUROPE (excluding UK) Clubmate Golf
email: warren.lake@golfscience.co.za
Germany/Austria TCF Golf GBR TM
Siebenborn 28
Augustinusstrasse 9c
Brey/Rhens 56321
Frechen, Germany D-50226
Germany
Tel: 49 2234 93343-3
Tel: (49) 674 280 8491
Fax: 49 2234 93343-55
www.tcfgolf.com
www.clubmategolf.com
email: info@tcfgolf.com
email: info@clubmategolf.com
is a registered trademark of Tom Wishon Golf Technology.
TomWishonGolf TECHNOLOGY
Š2010 TWGT All rights reserved. All other trademarks belong to their respective owners. Prices published in the catalog and website do not include shipping and handling, and are U.S. currency prices only. Prices on all products are subject to change without notice and are quoted as FOB from our warehouse in Durango, CO.