Midwest #23, 2009 - CEG

Page 1

$3.00

Published Nationally

Midwest Edition

® November 14 2009 Vol. XVI • No. 23

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com

Inside

IDOT Takes on New Phase for Freeway in Ill.

A Case CX225 excavator sets coping panels on top of the retaining wall on the toll road project.

E rb Equipment Acquires K & W in Ind., Ky. …16

By Lori Lovely CEG CORRESPONDENT

Alex Lyon & Son Sale Draws Bidders in Wis. …68 $3.00

Published Nationally

Midwest Edition

® October 31 2009 Vol. XVI • No. 22

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com

Inside

Congress Lags on Highway Bill Extension By Giles Lambertson

drag on the construction economy. Here’s the deal: Though the Senate agreed with the House at the very last moment to a one-month extension of existing transportation funding authority, senators failed to include a provision to roll back funding rescissions stipulated in the last six-year bill. The $8.7 billion in rescission money was a bookkeeping method of understating the true cost of SAFETEA-LU, which was passed in 2005 (two years into the six years of its effective authority). The sleight of hand was needed to help win legislative support. However, the scheduled rescissions never were voided, as planned, and inadvertently became effective Oct. 1. “For most states, it is not hard cash money, just promise money,” said

CEG CORRESPONDENT

Manitowoc c Opens s New Centerr in n Indiana…12

U off M Kicked d Offf Season With h New w Stadium…44

Ritchie e Bros.. Hosts Sale e in n Medford…75

Table of Contents ........4

When the U.S. Senate failed in September to enact six-year transportation legislation or to extend the existing funding authority in a responsible way, it created a billion-dollar-a-month hole for the construction industry. “The baseline for the federal highway account is reduced by a billion dollars each month we have a continuing resolution,” said Tony Dorsey, media spokesman of the American Association of State Highway and Transportation Officials (AASHTO). “It will cost our members one billion dollars every month we have a resolution.” While the huge loss is mostly on paper — so far — it nonetheless is a

see EXTENSION page 51

‘Start Us Up USA!’Rallies for Investment, Jobs in Ill. Start Us Up USA!, a nationwide grassroots campaign of the construction equipment industry and their allies, descended upon Chicago Oct. 20 with a rally of local business and labor leaders and construction workers calling on the federal government to move quickly on the reauthorization of a critical transportation bill. New transportation funding is necessary to improve the nation’s infrastructure and spur a recovery of the construction equipment industry, especially in hard-hit states like Illinois. The rally was followed

by a caravan of construction equipment, idled by the lack of federal support, parading around Soldier Field to urge the federal government to stop job loss. “The construction equipment industry is in a deep depression and we have lost 33,000 jobs in Illinois and 37 percent of our workforce nationwide the past few years,” said Toby Mack, president and CEO of the Associated Equipment Distributors (AED), based in Oak Brook, Ill.

By Maura Bohart and Peter Suanlarm Diane Benck, vice president of West Side Tractor Sales Co., noted how difficult this recession has been on the employees of her company as well as the other distributors across America.

see CHICAGO page 16

$3.00

Published Nationally

®

Midwest Edition

October 17 2009

Trailers Section ....33-40

®

Vol. XVI • No. 21

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com

Inside

MDOTRehabilitates Crucial Mich. Corridor By Lori Lovely CEG CORRESPONDENT

Paving Section ......59-67 Parts Section ........68-69 Auction Section ....74-81 Advertisers Index ......83

ICUEE E Welcomes s Large o Louisville…12 Turnoutt to

HCEA A Preserves s History att Annuall Convention…14

Halll Industriall Thanks Customers s in n Ohio…58

Table of Contents ............4

A short 19-mi. (30.5 km) stretch of road just north of Detroit has been transformed into an improvement project with a rather complicated strategy. Extensive work on the I-96/I-696 corridor in Oakland and Macomb counties has been divided into four separate projects. Project 1 consists of rehabilitation of eight bridges and repair of 4 mi. (6.4 km) of pavement in Oakland County between Novi and Halsted roads, including the I-96/I-696/M-5 interchange in Novi and Farmington Hills. Project 2 picks up where the first project ends and involves pavement patching and rehabilitation of 42 bridges on I-696 in Oakland County between Halsted and Campbell-Hilton roads. Project 3 focuses on rehabilitating 22 bridges on I-696, 15 of which are located within the I696/Mound Road interchange. Project 4 includes rehabilitation of six bridges and extensive pavement repairs to I-696 between Hayes and Nieman roads in Macomb County. Also included are safety upgrades and lighting replacement on the median and ramps. Overlap For all practical purposes, the $67 million overall project has been divided into two contracts — east and west — with two prime contractors: Dan’s Excavating out of Grant, Mich., on the west contract and C.A. Hall on the east. But even that division is a little blurry. “There are overlapping facets,” says Bob Daavettila, construction director for Tetra Tech,

West $3.00

®

Southeast

New England THE NEW ENGLAND SUPPLEMENT

Published Nationally

1

Published Nationally

11

®

Western Edition

Northeast Edition

95

1

$3.00

®

201 16 9

26

1 91

95

7

1

93

495

16

Southeast Edition

4

October 14 2009

89

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

October 7 2009

F O R M E R LY

95

202

7

October 14 2009

Vol. XLVIII • No. 21

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequip mentguide.com

91

9

95

93

95 93

95 91

84

495 6

84 91

$3.00

Vol. XXII • No. 20

90 90

7

7

Vol. XXII • No. 21

6 195

395

95

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

6

E

Q

U

I

P

M

E

N

T

G

U

I

D

E

95

95

“The Nation’s Best Read Construction Newspaper… Founded in 1957.”

470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.ConstructionEquipmentGuide.com

470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequip mentguide.com

Your New England States Connection • John LaCamera 1-800-225-8448 • Kent Hogeboom 1-800-988-1203

Business Calendar ........32

$14 million contract to conduct bridge rehabilitation and concrete patching on I-696 — the east project. The west contract involves significant amounts of overlay, but there is none on the east contract. Instead, there is, as Daavettila says, “a lot of concrete patching.” Other Names for an Old-Time Trail Before being designated as a military highway in 1832, the corridor from Lake Michigan through Detroit, Lansing and Grand Rapids was

Constructing a Healthy Look at Health Care Reform CEG CORRESPONDENT

By Giles Lambertson Health care reform in the United States has been beaten nearly to death this year by advocates and critics alike. Yet as the debate moves into October, the final shape of “reform” remains elusive and elastic with construction industry executives anxious about its impact on their companies. Any change in the system definitely will have impact on contractors and a sweeping change could upend smaller firms — and most construction companies are small-to-medium-sized. The truth of the matter is the

reform model in which government would provide most health care services would dramatically change the way every business operates, large or small. It is impractical to hope that health care reform will be tailored to the construction industry. Nevertheless, small businesses consistently favor certain reform initiatives over others. Were Washington to institute reform along the lines general contractors might lay down, the following features would be among the legislated changes: • New authority for associations to negotiate insurance packages see REFORM page 51

Constructing Healthy Look at Health Care

I nside

I nside

Constructing Healthy Look at Health Care

Construction crews pour concrete for an abutment that will support the Route 202 parkway bridge over Route 309.

By Giles Lambertson CEG CORRESPONDENT

HOLT T Crane e Hosts s Open e in n Houston…8 House

Horrocks Engineering and H.W. Lochner Engineering are the designers and Ralph L. Wadsworth Construction is the general contractor. Some of the bridges were transported as much as a mile and a half which is “a good distance,” Montoya said. “That was significant. There are a fair amount of projects where you move a bridge a couple hundred feet but we actually moved some of them a mile and a half.” The bridges that were moved vary in length from 85 to 173 ft. (25.9 to 52.7 m) and were 43 to 94 ft. (13 to 28.6 m) wide, Carlye Sommers, public involvement manager for Lochner, said. The largest weighed in at 1,350 tons (1,220 t). The SPMTs that moved the bridges had approximately 250 wheels and moved at an average speed of five miles per hour, Sommers said. The only route crews could move the bridges down was the same one they were working on so

Health care reform in the United States has been beaten nearly to death this year by advocates and critics alike. Yet as the debate moves into October, the final shape of “reform” remains elusive and elastic with construction industry executives anxious about its impact on their companies. Any change in the system definitely will have impact on contractors and a sweeping change could upend smaller firms — and most construction companies are small-tomedium-sized. The truth of the matter is the reform model in which government would provide most health care services would dramatically change the way every business operates, large or small. It is impractical to hope that health care reform will be tailored to the construction industry. Nevertheless, small businesses consistently favor certain reform initiatives over others. Were Washington to institute reform along the lines general contractors might lay down, the following features would be among the legislated changes: • New authority for associations to negotiate insurance packages for their members. Besides gaining clout in negotiating benefits, association insurance negotiators could win lower premiums, if given the opportunity. Associated Builders and Contractors noted that private insurance carriers must mark up premiums as much as 35 percent when dealing with small groups in order to meet profit targets and offset overhead. Whereas associations can provide the same administrative services for their members at a cost of 15 percent or less — if, that is, members are allowed to buy insurance through small business

see UDOT page 37

see REFORM page 28

The bridges that were moved vary in length from 85 to 173 ft. (25.9 to 52.7 m) and were 43 to 94 ft. (13 to 28.6 m) wide. The largest weighed in at 1,350 tons (1,220 t). Scott-Macon n Holds s Grand g in n Dallas…14 Opening

see MICHIGAN page 44

Truck & Trailer Section .... ..................................35-42 Crushing, Screening & Recycling Section ....55-62 Parts Section ................63 Auction Section ......68-74 Advertisers Index ..........75

Northeast

Published Nationally

October 10 2009 Vol. V • No. 21

A total of 56 bridges will undergo rehabilitation. Because C.A. Hall is a subcontractor for all bridge work on both contracts and since there is a lot of bridge work in the west contract, Hall is doing considerable work on both.

particularly concerning the bridge work. A total of 56 bridges will undergo rehabilitation. Because C.A. Hall is a subcontractor for all bridge work on both contracts and since there’s a lot of bridge work in the west contract, Hall is doing considerable work on both. “Because they’re a major sub, it leads to a lot of coordination. Hall is at all the meetings for the Dan’s contract.” According to Daavettila, the two big contracts consist of a two-year project for $47 million to reconstruct pavement from Novi to Farmington Hills — the west project — and a

CEG EDITORS

Our Latest Issues Are Now Online!

Midwest

Business Calendar......23

Joint Venture Tackles Indiana Toll Road Project

Reconstruction on Schedule for UDOT’s $139M Project By Kathie Sutin CEG CORRESPONDENT

Cashman n Supports s Start s Up p USA!! in n Vegas…39 Us

Table of Contents ........4 Crushing, Screening & Recycling Section ..19-23 Business Calendar ....20 Truck & Trailer......33-35 Parts Section ............37 Auction Section ....41-45 Advertisers Index ......46

Work on a Utah freeway reconstruction project so unusual it was featured as National Geographic Channel’s “World’s Toughest Fixes” is heading for an on-time, on-budget completion at the end of the year. What made work on a 2-mi. (3.2 km) stretch of I-80 in Salt Lake City project extraordinary was the Accelerated Bridge Construction (ABC) method using Self Propelled Modular Transports (SPMT) to construct six of 12 bridges and one of two ramps in the project. The $139 million project along a 2-mi. stretch from State Street to 1300 East through Salt Lake City includes construction of the bridges and ramp “not at their final location,” John Montoya, project manager, said. Instead, the girders and decks were constructed on the ground at a “bridge farm.” Massive transporters moved them to be lifted into place along the expressway.

By Giles Lambertson

Words Into Action: Route 202 Parkway Finally Advances projects and this particular job was among those re-evaluated. As a result, a parkway was ultimately chosen as an appropriate solution for improving After many years of discussion, an ambitious travel conditions in the area while remaining withproject to ease congestion in Pennsylvania’s in the limitations imposed by available funds. densely populated Bucks and Montgomery counsee PARKWAY page 30 ties is finally under way with construction of a long-awaited parkway. The Pennsylvania Department of Transportation (PennDOT) has estimated that by 2020 the new highway will be traveled by between 23,700 and 28,300 vehicles daily Gov. Martin O’Malley announced that additional transportation Certain changes, however, projects worth $30 million will be funded by President Barack had to be made before ground Obama’s American Recovery and Reinvestment Act (ARRA). could be broken for the project. Funding for these additional projects is available due to savings According to PennDOT, the generated by the intense competition for Maryland’s ARRA highparkway had initially been way and transit contracts advertised earlier this year. planned as an expressway with “Without a doubt, President Obama’s recovery program is genlimited access. However, in erating the desired effect here in Maryland,” said O’Malley. March 2004, the department “Across our state, work is under way rehabilitating our roads, bridges and transit systems. Healthy competition for those state realized its projected revenues would not provide enough see FUNDS page 116 funding for all its proposed

By Mary Reed

CEG CORRESPONDENT

H C E A Holds s 24th h Annual Convention…18

Table of Contents ............4 Truck & Trailer Section .... ..................................58-63 Crushing, Screening & Recycling Section ....67-88 Parts Section ................89 Business Calendar ......111 Auction Section ..110-128 Advertisers Index........126

Additional $30M in Funds En Route to Md.

Health care reform in the United States has been beaten nearly to death this year by advocates and critics alike. Yet as the debate moves into October, the final shape of “reform” remains elusive and elastic with construction industry executives anxious about its impact on their companies. Any change in the system definitely will have impact on contractors and a sweeping change could upend smaller firms — and most construction companies are small-tomedium-sized. The truth of the matter is the reform model in which government would provide most health care services would dramatically change the way every business operates, large or small. It is impractical to hope that health care reform will be tailored to the construction industry. Nevertheless, small businesses consistently favor certain reform initiatives over others. Were Washington to institute reform along the lines general contractors might lay down, the following features would be among the legislated changes: • New authority for associations to negotiate insurance packages for their members. Besides gaining clout in negotiating benefits, association insurance negotiators could win lower premiums, if given the opportunity. Associated Builders and Contractors noted that private insurance carriers must mark up premiums as much as 35 percent when dealing with small groups in order to meet profit targets and offset overhead. Whereas associations can provide the same administrative services for their members at a cost of 15 percent or less — if, that is, members are allowed to buy insurance through small business health plan pools. see REFORM page 22

The Northeast Rockbusters sign adorns a 1934 McCormick Deering track tractor owned by Dave Burnham of Saunderstown, R.I., president of the group and one of the event’s chief organizers.

6'x5' Screenbox.

By Lori Lovely

MULTI MACHINE INC. BEST WE STOCK PRICES RUBBER TRACKS for Over 2,500 Models!

Stafford d Holds s Open n House at t Its s New w Va.. Facility…8

Some Used Tracks Available.

• GUARANTEED TO FIT • HIGH QUALITY

Argus Industrial Co. Works with 1/2 to 2 yard loaders. 20 HP Deutz Diesel Engine. 24" Conveyor dumps screened products 9' high Two (2) Year Warranty

NEW

$39,500

• FAST SHIPPING

888-888-1248 Kraft Power Corporation

Engines, Parts & Service

800-969-6121 Woburn, MA & Syracuse, NY

H C E A Holds s 24th h Annual Convention…18 Authorized Deutz Distributor

plus freight.

Other Screeners Available From Argus Industrial Co. www.ez-screen.com

For all your used equipment go to

www.ewsleeper.com

866-745-5828

WANTED CATERPILLAR EQUIPMENT Call Lou Giza www.foleyengines.com

603-595-2090

Your #1 Source for Used Equipment

Visit: www.chadwick-baross.com

Bangor, ME (207)) 942-4838 Caribou, ME (207)) 498-2547

Westbrook, ME (207)) 854-8411 Chelmsford, MA (978)) 479-5192

Concord, NH (603)) 224-4063

Georgia Flood Recovery Begins in Earnest CEG CORRESPONDENT

call

EZ Screen 1200XL NOW with a

I nside

EQUIPMENT FINANCING CHARLES S RIVER R FINANCIAL 617-787-9090

www.kraftpower.com

CEG CORRESPONDENT

Philly y Lifted d to o New Parking g Heights…8

Atlantic c City y Welcomes A Members…12 UTCA

Kraft Power Corporation Perkins Master Service Dealer NJ, MA & NY Engines, Parts & Service

800-969-6121

Antique Truck Lovers, NE Rockbusters Join for Sixth Annual Machine Show By Jay Adams CEG CORRESPONDENT

In trucking, cooperation is everything. The same could be said for construction work, all contracting and the running of any successful club or organization. Cooperation in all these arenas came together as one at the Antique Truck Club of America’s Little Rhody Chapter’s Sixth Annual Antique Truck Show on Sept. 13 on the Washington County Fairgrounds in Richmond, R.I. Working in conjunction with the Historical Construction Equipment Association’s (HCEA) Northeast Rockbusters once again, more than 60 members of the local Antique Truck Club brought out their finest old equipment, to the delight and surprise of other members, guests and enthusiasts. The Antique Truck Club and the Rockbusters hold this event every September, drawing people from every New England state. Machines that range from the unusual to the sublime fill the flat fields of the fairgrounds for passersby to

admire. “We combine our shows. We support them and they support us, even in the rain,” said Jackie Volatile, who organizes these shows with her husband, Roger, the club’s president. What made the presidential couple so proud this year was that the event was organized to raise money and food for the Rhode Island Food Bank. We brought in 800 pounds of canned goods. Last year, we fed 2,000 needy families for a year and we are quite proud of that,” said Jackie Volatile. They also are very proud of the cooperation and shared interests of their members who bring any and all working antique machines to these events, as long as they are able. “We welcome classic trucks, we welcome tractors, anything that comes in,” added Roger Volatile. “Antique is antique to us.” The Volatiles represent the Little Rhody Chapter at national events, usually held in the National Chapter’s home state of Pennsylvania. “There are 21 different chapters in the see ROCKBUSTERS page 14

St.. Johns s River r Dredging Under r Way…27

Table of Contents ............4 Paving Section ........33-45 Mini & Compact Equipment Section ..49-62 Parts Section............64-65 Business Calendar ........74 Auction Section ......80-91 Advertisers Index..........90

A series of torrential downpours in the Atlanta metro area in late September caused what U.S. Geological Survey experts deemed a 500-year flood, leaving 10 people dead and 20 counties in Georgia disaster areas. The rain also triggered extensive flooding throughout Georgia, Tennessee and Alabama. Flooding in Atlanta peaked on Sept. 21, after more than 20 in. of rain fell overnight. Georgia Gov Sonny Perdue quickly declared a state of emergency in 17 Georgia counties, clearing the way for the massive deployment of state personnel and equipment. President Barack Obama followed suit in similar rapid manner, issuing a Federal Disaster Declaration for individual assistance to aid residents of the 14 counties that were hardest hit: Carroll, Catoosa, Chattooga, Cherokee, Cobb, DeKalb, Douglas, Fulton, Gwinnett, Newton, Paulding, Rockdale, Stephens and Walker The Georgia Emergency Management Agency coordinated the state’s recovery effort with local, state, federal and volunteer counterparts. “Damage assessment teams are continuing to work with local authorities in all affected areas of the state to assess losses,” Georgia Emergency Management Agency Director Charley English told reporters in the days following the flood. With reports of closed highways, roads, bridges, schools and businesses, and as many as 20,000 homes and other structures that have suffered major damage, Georgia Insurance Commissioner John Oxendine adjusted his initial estimate of flood-related insurance claims, doubling the total to as much as $500 million. However, Atlanta Mayor Shirley Franklin, isn’t happy with even the revised numbers. She predicted to presidential officials that damage will reach $1 billion, pointing out that repairing the R.M. Clayton sewage treatment plant on the Chattahoochee River could cost $100 million alone. GDOT Deployment While stating its own prediction of $2 billion in damages, the Georgia Department of see FLOOD page 25

Cat 321C LCR and 330DL excavators are hard at work at a C.W. Matthews project in Northeast Cobb County, Ga., for emergency Cobb DOT road replacement, which included installation of a triple barrel 72 in (183 cm)., 70 ft. (21 m) long piping system and temporary road to service 40 homes that were without a roadway to get out of their Waterford subdivision homes.

Hensel Phelps Leads Charge for New Fort Bragg Commands By Angela B. Hurni CEG CORRESPONDENT

In 2005, the Base Realignment and Closure (BRAC) law was passed by Congress. With BRAC, the Department of Defense reorganized its installation infrastructure in order to more effectively and efficiently support its forces. As a result of this law, operational readiness would increase and allow for innovation in doing business. A major change that has occurred under BRAC involves moving two commands, U.S. Armed Forces Command (FORSCOM) and

the U.S. Army Reserve Command from Fort McPherson, in Atlanta, to Fort Bragg, in Fayetteville, N.C. The new Command Headquarters complex is currently under construction at Fort Bragg. The groundbreaking ceremony for the Command Headquarters complex was held December 8, 2008, and construction began in February 2009. The building will house both commands, but they will remain separate. According to Billy Birdwell, Public Affairs Specialist, Savannah District, U.S. Army Corps of Engineers (USACE), “The consee BRAC page 67

Digital Editions Available at constructionequipmentguide.com

Table of Contents ........4 Business Calendar......20 Crushing, Screening & Recycling Section 29-34 Parts Section ..............39 Trucks & Trailers ..53-59 Auction Section ....64-70 Advertisers Index ......71

For the past three years, the Indiana Toll Road has undergone major improvements. These improvements came about as a result of the growing population in Lake and Porter

counties, necessitating the ITR Concession Company LLC (ITRCC) to widen the Indiana Toll Road. As a result, ITRCC hired Indiana TollRoads Contractors LLC, a joint venture between Ferrovial Agroman Indiana LLC see TOLL page 50

For the third time in 20 years, Mike Myszkowski, Illinois Department of Transportation engineer, is resurfacing the Bishop Ford Freeway just outside of Chicago. In 1989, a “surface fix” was performed, putting down a 2-in. (5 cm) layer of asphalt. In 1998, the work needed to be repeated, due to wear caused by heavy traffic. Nearly 10 years later, the road once again needs repair. The current rehabilitation project involves resurfacing all lanes and shoulders of the 9-mi. (14.5 km) stretch of freeway between Martin Luther King Drive and 159th Street, as well as pavement patching, bridge repairs, new guardrail installation and exit/entrance ramp resurfacing — including the Stony Island Feeder Ramp. One of nearly 250 “shovel-ready” construction projects in Illinois, the $27.5 million job, funded by the Stimulus Plan — President Obama’s American Recovery and Reinvestment Act, is a joint venture headed by Chicago area-based Gallagher Asphalt and K-Five Construction. Let in April, work got see BISHOP page 42

Annual Chicago Construction Expo Draws Nears Mark your calendars! The fourth annual Chicago Construction Expo at the Renaissance Shaumburg Convention Center in Schaumburg, Ill., is primed and ready to go on Wednesday, Feb. 24 and Thursday, Feb. 25, 2010. Show hours will be 9:30 a.m. to 4 p.m. Visitors have come to expect an extensive and diverse collection of exhibitors at the Chicago Construction Expo, and this year’s show will be no different. Additionally, the expo will provide networking and educational opportunities for attendees. This year’s show will feature several seminars, training sessions and certification programs including Julie One Call, LICA and UCA as presenters. The show is going green this year, with the introduc-

tion of the virtual totebag. The Virtual Totebag is an eco-friendly solution designed to reduce the cost and waste of printing, shipping and distributing paper collateral. With the Virtual Totebag, attendees can request, store and share session content and exhibitor materials via their mobile devices. Door prizes, donated by the exhibitors, will be awarded throughout the show, and show-goers are likely to run into a celebrity or two as they travel the show floor. For more information on exhibiting, call Bob Buckley, CEG Productions sales manager, at 800/9927116. For all other questions, call Sheila Kirby, CEG Productions trade show manager, at 800/523-2200, or visit www.cegltd.com.


Page 2 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Call 630-279-4400 Fax: 630-279-9243 www.pattencat.com Complete inventory available online

DOZERS

PATTEN CONSTRUCTION PRODUCTS

SKID STEERS Cat 232B, 2004, UN1671, EROPS, Aux Hyd ........................$21,000

Cat D3C XL, 1999, UN1956, EROPS, A/C, PAT Blade ..........$31,000

Cat 232B, 2007, UE1061, EROPS, Heat, Aux Hyd ................$20,000

Cat D4HII, 1990, UE1063, OROPS, PAT Blade......................$25,000

Cat 242B, 2005, W0333, EROPS, Heat, Aux Hyd ................$19,000

Cat D5HII, 1986, UN1800, OROPS, PAT Blade ....................$44,000

Cat 246C, 2008, UE1047, EROPS, Heat, Aux Hyd ................$38,000

Cat D6R LGP, 2006, UN1810, EROPS, A/C, SU Blade........$235,000

Cat 252B, 2004, UE1087, EROPS, Heat, A/C........................$25,000

ID# N3912 $40,000

Cat D6R XL, 2006, UN1811, EROPS, A/C, SU Blade..........$229,000 Cat D8RII, 2003, UN2205, EROPS, SU Blade ....................$245,000

Cat 252B, 2005, W0372, EROPS, Heat, Aux Hyd ................$19,000 Cat 252B2, 2007, UN2238, EROPS, Heat, Aux Hyd..............$30,000

TRACK LOADERS

Cat 262B, 2005, W0523, OROPS, Aux Hyd ..........................$19,000 Cat 953B, 1994, UN1413, OROPS, GP Bucket, New Paint....$40,000

Cat 272C, 2008, UN2120, EROPS, Heat, High Flow ............$38,000

Cat 953C, 1997, UE1014, EROPS, A/C, GP Bucket ..............$40,000

Cat 287B, 2006, UN1666, EROPS, A/C, Hyd Coupler ..........$32,000

Cat 963B LGP, 1996, UN1581, OROPS, GP Bucket..............$55,000

New Holland C185, 2007, UN2251, EROPS, A/C, Aux Hyd $36,000

Cat 963B LGP, 1997, UN1794, OROPS, Drawbar, GP Bucket$45,000

TELEHANDLERS

ID# UE1013 $110,000

Cat 963B LGP, 1998, UN1943, OROPS, GP Bucket..............$40,000 Cat 953, 1983, UE1035, OROPS, GP Bkt..............................$23,000

Cat TH220B, 2005, N3912, OROPS, Hyd Coupler................$40,000

Cat 953C, 1996, UN2137, EROPS, GP Bkt ..........................$45,000

Cat TH360B, 2005, N3785, EROPS, Hyd. Coupler ..............$47,000

Cat 953B, 1993, UN2176, EROPS, GP Bkt............................$35,000

EXCAVATORS

WHEEL LOADERS/LOADER BACKHOES

Cat 305CR, 2005, W0279, EROPS, A/C, Long Stick ............$39,000 Cat 420D IT, 2004, UN2289, EROPS, A/C, E-Stick ..............$44,000

Cat 315L, 1994, UN2173, EROPS, Heat................................$30,000 Cat 330CL, 2002, UE1017, EROPS, A/C, Aux Hyd ..............$88,000

ID# UN1941 $105,000

Deere 450C LC, 2005, A/C, Quick Coupler ........................$225,000

Cat 420D IT, 2005, N4236, EROPS, A/C, E-Stick ................$59,000 Cat 420E IT, 2006, N5116, EROPS, A/C, E-Stick ................$65,000 Cat 430D IT, 2005, N4001, EROPS, A/C, E-Stick ................$59,000

Hitachi EX700, 1994, UN1552, A/C ....................................$95,000

Cat 430D, 2004, N3592, EROPS, A/C, E-Stick......................$55,000

COMPACTION

Cat 430D IT, 2005, N3997, EROPS, A/C, E-Stick ................$55,000 Cat 938G, 2005, UE1013, EROPS, A/C, Ride Control ........$110,000

Cat CB-534DXW, 2003, N2824, DD, Water/Vibe SYS, OROPS ..........

Cat 950H, 2006, UE1016, EROPS, A/C, Ride Ctrl ..............$145,000

....................................................................................................$59,000 Cat CB534D, 2003, N2896, OROPS, Versa-Vibe, DD Water Spray ........

Cat 980G, 2001, UN0980, A/C, Ride Control, GP BKT ......$199,000

ID# UN1956 $31,000

........................................................................................................$50,000

Rob Mahoney 630-758-1296 Mobile: 630-669-6533 625 W. Lake Street Elmhurst, IL 60126 mahoneyr@pattenindustries.com

ID# UN2283 $110,000

Cat 988G, 2004, UE1058, EROPS, A/C, RCtrl, AutLube ....$220,000


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 3

2002 Cat 980G II, cab, A/C, 311HP, 66,000#, ride control, 7 yard bucket, 29.5R25 tires, 5,663 hours, $189,500

2003 Cat 953C, cab, A/C, 33,400#, 20” pads, 2.5 yard GP bucket, drawbar, joystick, 3,715 hours, $64,500

2003 Cat 963C, cab, A/C, 43,000#, 22” pads, 3.2 yard GP bucket, 2 lever controls, 5,288 hours, $84,500

2003 Cat 973C, cab, A/C, 7,800 hours, $102,500

2005 New Holland LB75.B, OROPS, 15,000#, 4x4, pilot controls, 289 hours!, $28,500

2003 New Holland LB75.B, cab, 15,500#, 4x4, extend-a-hoe, 2 lever controls, hammer circuit, 862 hours, $39,500

2006 New Holland B95LR, cab, A/C, 15,500#, ride control, long reach extend-a-hoe, 4x4, 24” bucket, pilot controls, 260 hours, $52,500

2005 New Holland LB75.B, cab, ride control, extend-a-hoe, 4x4, pilot controls, 4-n-1 bucket, 24” bucket, 459 hours, $44,500

2006 Cat D6R XL III, cab, A/C, 200HP, 45,000#, 24” pads, 10’ 8” semi-u blade, sweeps and screens, drawbar, 3,361 hours, $149,500

2004 Cat D6N LGP, cab, A/C, 150HP, 35,500#, 34” pads, 13’ 6” 6way blade, diff steer, 3rd valve, 3,845 hours, $119,500

2001 Cat 330BL, cab, A/C, 74,000#, 220HP, 34” pads, 10’ stick, hydraulic q-coupler, 3,898 hours, Labounty grapple, $89,500

2007 Cat 345CL, cab, A/C, 345HP, 100,000#, 36” pads, 13’ stick, 1,743 hours, factory warranty ‘til 1-8-10, $224,500

2007 Challenger MT875B, cab, A/C, powershift, 30” belts, 6 remotes, new tracks and rollers, front weights, 2,140 hours, $189,500

2005 Ford F650, 26,000# GVWR, VT-365 diesel, 7 speed, A/C, 2,200 gallon United tank, 43,527 miles, $24,500

2005 Cat 613C, cab, A/C, NEW 5,000 gallon AGM tank, side and rear discharge, water cannon, hose reel, 23.5-25 tires, 4,631 hours, $124,500

UNUSED 2008 TrailKing TK110 hydraulic detachable gooseneck, 55 ton, self contained, 48’ x 102”, 24’ deck, air ride, air lift 3rd axle, set up for flip 4th axle, 2 pin neck, $49,500 plus FET

Fax: 815-941-1486 Email: sales@iltruck.com The Premier Midwest Equipment Dealer

View Entire List of Equipment at:

www.iltruck.com

I-80 Joliet Davenport IA

Lake Geneva, WI

Chicago

Rt. 47

815-941-1900

Rockford

I-39

“The Premier Midwest Equipment Dealer”

I-55 Exit 112

Morris

Gary IN

Rt. 6 N

1/2 Mile W

E

Dwight S


Page 4 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION Circulated Throughout

IN THIS ISSUE SPECIAL SECTION…

29

29

RECYCLING, CRUSHING AND SCREENING

Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

Founder, Publisher & CEO Vice President Emeritus Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr. Main office

FEATURES…

14

FIRST IMPRESSIONS SHINE FOR BOBCAT T630 M-SERIES LOADER

In today’s economic environment, Maine Township Superintendent Bob Brzezinski is constantly looking for ways to keep costs down while still getting his projects done.

14

FOLEY EQUIPMENT ACQUIRES MARTIN TRACTOR; ADDS 50 COUNTIES IN KAN.

With this acquisition, Foley Equipment will add an additional 50 counties and offer an enhanced set of resources to deliver even better and more comprehensive customer service and business solutions throughout Kansas.

16

14

DAWES RIGGING & CRANE RENTAL DONATES TO RAWHIDE BOYS RANCH

More than 125 people participated in the company’s 17th Annual Golf Outing, including Dawes customers, equipment manufacturers.

Toll Free Fax Web site Editorial e-mail Advertising e-mail For advertising rates Contact

20

20

LINK-BELT HOLDS CRANEFEST 2009 TO CELEBRATE ITS 135TH ANNIVERSARY

Link-Belt Construction Equipment Company held CraneFest 2009 at its world headquarters in Lexington, Ky., the week of Sept. 28. The event marked Link-Belt’s 135th Anniversary, and its 35th year at its Lexington facility.

47

47

TEREX WELCOMES D-P EQUIPMENT CO. AS NEW COMPACT EQUIPMENT DISTRIBUTOR

D-P Equipment Co. Inc., with branches in Camden, Mich., and Montpelier, Ohio, now distributes the full line of Terex compact construction equipment.

68

ONE COMPLETE UNLOADS IRON WITH ALEX LYON & SON IN WIS.

The auction featured a liquidation for One Complete Construction Company plus the auctioning off of aerials, forklifts, trucks, dump trucks, trailers and support.

68

20 BUSINESS CALENDAR 62 CLASSIFIEDS 64 COMING AUCTIONS

EQUIPMENT… 69 HIRSCHMANN iVisor Mentor E165 Indicator System

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com Joseph S. McKeon • Missouri • Kansas

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

Toll Free Fax

ERB EQUIPMENT ACQUIRES K & W EQUIPMENT IN IND., KY.

K & W Equipment now will go under the banner of Erb Equipment Company and most of K & W’s employees including Dick Christ, manager of the Owensboro location, have joined the Erb team.

Edwin M. McKeon Sr. Hal Ewing Joseph S. McKeon Craig Mongeau Peter Suanlarm Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

• Illinois • Wisconsin • Northwest Indiana

Contact

16

• North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

Ed Bryden • Central and Eastern Indiana • Michigan • Ohio • Kentucky

440/268-9690 800/810-7640 440/268-9691 e-mail ebryden@cegltd.com

Toll Free Fax

Contact

Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2009, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 5

Takeuchi TL140, ‘05, 984 hrs ................$22,500

Deere 200LC, ‘04, 7000 hrs....................$47,500 EXCAVATORS

(3) Hamm HDO120HV Rollers, ‘06 ..........CALL

Komatsu PC50MR-2, ‘06, 1161 hrs ......$40,000

Hyster Roller C747B, ‘01, 3497 hrs ......$14,500

Komatsu PC150LC-6, ‘98, 9246 hrs ......$39,500

Hyster Roller C747B, ‘06 ......................$14,500

Komatsu PC150LC-6, ‘99, 5600 hrs ......$45,000

LeeBoy 8500, ‘96 ....................................$22,500

Komatsu PC200LC-7, ‘05, 3800 hrs ......$84,500

LeeBoy 8500, ‘97 ....................................$14,500

Komatsu PC200LC-7, ‘05, 2718 hrs ......$89,500

LeeBoy 8500LD, ‘04, 2236 hrs................$45,500

Komatsu PC200LC-7, ‘04, 5418 hrs ......$72,500

LeeBoy 8500LD, ‘04, 2739 hrs................$26,500

Komatsu PC228UCLC-3, ‘01, 4587 hrs..$75,500

LeeBoy 8515, ‘06, 3300 hrs ....................$29,500

Timbco 415D, ‘99 ..................................$145,000

Komatsu PC300LC-6, ‘01, 11,700 hrs ....$67,500

IR DD24 Roller, ‘04, 2728 hrs ................$16,500

Timbco 415D, ‘00, 7365 hrs ..................$165,000

Komatsu PC300LC-7, ‘03, 6222 hrs ......$99,500

IR SD105DX Roller, ‘03, 1487 hrs..........$54,500

Timbco 415B, ‘96 ....................................$95,000

Cat 311B, ‘96, 4080 hrs ............................$29,500

Metso ST620 Mobile Plant, ‘05 ................CALL

Timbco 425E Proc., ‘01........................$145,000

Cat 315CL, ‘01, 4080 hrs ........................$55,500

Raygo Barco 100 Planner, ‘82..............$12,500

Valmet 911C Processor, ‘00................$110,000

ARTICULATED TRUCK Volvo A35C, ‘01 ....................................$117,500 Moxy MT30, ‘95, 9000 hrs ......................$37,500

FORESTRY Fabrek FT-133 Harvester, ‘00 ..............$90,000

Deere 200LC, ‘04, 7000 hrs ....................$47,500 Hitachi EX400LC-3, ‘96 ..........................$36,500

DOZERS

Hitachi ZX450, ‘05, 5060 hrs ................$139,500

Cat D5C, ‘01, 4500 hrs ............................$42,500

Volvo EC160BLC, ‘04, 3200 hrs ..............$60,000

Cat D6NXL, ‘03, 3841 hrs ........................$89,500

SKID STEER LOADER

Deere 550GLGP, ‘96, 4861 hrs................$29,500

Gehl 7810, ‘04, 1517 hrs ........................$21,500

Deere 550GLGP, ‘98, 9415 hrs ..............$21,500

Takeuchi TL140, ‘05, 984 hrs ................$22,500

Komatsu D31P-20, ‘93 ..........................$18,000

V I S I T

WHEEL LOADERS Komatsu WA380-5L, ‘06, 4293 hrs ......$115,000 Komatsu WA400-1, ‘87, 12,564 hrs ......$39,500 Komatsu WA500-3, ‘99 ..........................$70,000 Deere 624G, ‘93, 7223 hrs ......................$39,500

Komatsu D31PX-21, ‘06, 317 hrs ..........$56,750 MISCELLANEOUS

COMPACTION, MILLING & PAVING

Komatsu D61EX-15, ‘05, 950 hrs ........$105,500

Blaw Knox PF500, ‘87 ............................$19,000

Komatsu D475-3, ‘03, 15,197 hrs ................Call

Tramac Breaker V55, ‘02........................$36,500

(2) Hamm HD120HV Rollers, ‘03+’06 ......CALL

Komatsu WA65-3, ‘02, 3076 hrs ............$36,500

Komatsu TLB WB140, ‘03, 796 hrs ........$34,000

15 Roland Branch Locations in IL, IN, MI, MO, and WI Call Dave Reynolds at (217) 789-7111 ~ Email: dreynolds@rolandmachinery.com Call Gary Roberts at (262) 835-2710 ~ Email: groberts@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M


Page 6 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke

(630) 739-7770 Bolingbrook, IL Contact us at Used@McCannOnline.com

8 Chicago Area Locations

View our complete Used & “Like New” inventory at McCannOnline.com

2005 Takeuchi TB53FR, s/n 15811048, 1845 hours, Rubber Track MiniExcavator, Cab w/Heat, 18" and 24" buckets....$35,800

2001 Vac tron, s/n 13009, Multi/Crack-vac TRLR MTD with 200 gal Wet or Dry Vacuum dump tank, Gas Engine, with 60 gal pothole unit........................$23,000

2006 Case 1850K, s/n HHA431139, 704 hours, Cab w/Heat & A/C, 13'6" 6-way Blade, 30" Pads, Cold Start (48MO / 4000 Full Machine Warranty until 08-10-2009) ... ...........................$180,000

2007 Case 1150K, s/n N7DC00076, 786 hrs, Cab w/ Heat & A/C, 132" Dozer Blade, 30" Pads, Cold Start, (4000 Full Machine Warranty until 05-30-2001) . ...........................$129,000

Run, crawl, we do it all. Budrovich Crane rental is quickly becoming the leader in Midwest crane rental services. We are known for our superior equipment, operators and service with mobile hydraulic cranes ranging in size from 2-550 tons. Now, after 40 years of taking our customers to new heights, we have added a Manitowoc 999 and 0DQLWRZRF WR RXU ÁHHW WR meet the increasing demand for hoisting services which go above and beyond the St. Louis market. For your next project, let Budrovich Crane rental show you how we Run, Crawl and do it all. 314-892-3030 • www.budrovich.com

Takeuchi TL150, 97hp rubber trackloader, Cab w/Heat & A/C, joystick controls – CASE control pattern, 80" tooth bucket, I/D: 5023572324, 900 hours $39,995

Bobcat S185 Turbo, 56hp Kubota, 1,850# load rating, open ROPS, 10x16.5 tires new rubber, 67" tooth bucket, I/D: 036163, 1370 hours $15,995

Sky Trak 5028, 5,000# lift, 28' boom, open ROPS, 48" carriage w/ 48" forks, I/D: 9D2494, 3050 hours $17,500

Gehl 883, 8,000# lift, 40' boom, open ROPS, 50% rubber, 48" carriage w/ forks, I/D: 077242, 7400 hours $14,995 Takeuchi TL120, 52hp rubber trackloader, open ROPS, backup alarm, joystick controls, I/D: 200219, 300 hours $19,995

STAR EQUIPMENT LT D .

Mustang 940E, 40hp loader, T-bar steering, single pin FAT, tooth bucket, 10x16.5 tires @ 25%, I/D: 499606, 2057 hours $8,495 Mustang 2076, 84hp skid steer, open ROPS, hand/foot controls, hydraulic power-tach, I/D: 0048832312, 352 hours $21,995

# THE

2005 Vibromax VM116PDB, s/n JKC8340900, 945 hours, 82" Padfoot Roller with Blade .............$43,000

Mustang ME3003, 6,700#, 9’6” max dig depth, 29hp Yanmar diesel, OROPS, aux. hyd., 24” pin on bucket, I/D: D03044, 530 hours $16,995

CONSTRUCTION EQUIPMENT GUYS SINCE 1968

Call Sales 515-283-2215 • 877-267-7203 1401 2nd Ave • Des Moines, IA 50301 www.starequip.com

Des Moines • Ames • Cedar Rapids • Waterloo


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 7

2006 CAT 257B ......................................$21,500

1992 CAT 950F I ....................................$57,500

2004 CAT 287B ......................................$23,000

2005 CAT 262B ......................................$23,500

S/N SLK05074, 2,035 Hrs, Cab Heat, Hyd QC

S/N 4DJ00955, 8,734 Hrs, Cntrwght, 4cy, Bucket, 23.5R25 Tires

S/N ZSA00605, 1,595 Hrs, Canopy, GP Bucket

S/N PTD01701, 527 Hrs, Canopy, GP Bucket

2005 CAT 268B ......................................$25,000

2001 CAT 420D ......................................$39,000

2007 CAT 232B ......................................$16,900

1990 CAT D6H LGP ..............................$45,000

S/N LBA00792, GP Bucket, Towing Device Not Included

S/N FDP00439, 5,421 Hrs, EROPS, E-Stk, 4x4, Ride Control

S/N SCH01118, 275 Hrs, Canopy, GP Bucket

S/N 3YG00577, 7,835 Hrs, S-Blade, New P&B Segments

2002 CAT D4G XL..................................$49,500

2006 CAT 930G ....................................$130,000

2001 CAT IT28G ....................................$52,000

1998 CAT 140H ....................................$105,000

S/N CFN00523, 2,043 Hrs, EROPS, A/C, PAT Blade, Sweeps

S/N TWR01732, 790 Hrs, GP Bucket, Ride Control

S/N 8CR02826, 8,129 Hrs, QC, 20.5R25 Tires

S/N 2ZK03838, 4,882 Hrs, A/C, 17.5x25 Tires, 14' Blade

2004 CAT 315CL ....................................$68,000

2005 CAT 308C CR ................................$66,000

2005 CAT TH460B ................................$35,000

1997 CAT 325BL ....................................$60,000

S/N CJC00854, 3,296 Hrs, 10'2" Stick, 28" Pads

S/N KCX01137, 1,300 Hrs, Rubber Tracks, Blade

S/N SLF01447, 2,121 Hrs, OROPS, Tilt Carriage, Forks

S/N 2JR01139, 8,700 Hrs, 48" GP Bucket

Please Contact Bob Williams or Jeff Speer

800/353-1944

414/461-9100

Outside WI & Upper Michigan

Within WI & Upper Michigan

11200 W Silver Spring Rd. Milwaukee, WI 53225

www.FABCO.com Hundreds of machines. Listings updated daily.


Page 8 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

800-888-9515 952-895-7033 • 952-895-7054 • 952-895-7044 Sales/Rentals

Parts

• RENTALS • SALES • PARTS • SERVICE

Service

Lull 644E-42

Joe Graham jgraham@rmseq.com

www.rmsrentals.com 12520 Quentin Ave S. Suite 100 • Savage, MN 55378

USED EQUIPMENT Concrete Equipment

2006 Soff-Cut X-750 Early Entry Saw, #401249, 8" blade capacity, like new ...... ..................................................................................................................$5,595 2006 Allen Pro 1200 Riding Trowel, #357104, 8' width, Gas, Overlapping, 49 Hours ........................................................................................................$7,950 2007 Miller MB21 Concrete Buggy, #002869, 21 Cubic Ft., Foam Filled Tires, Like New, Propane Only ............................................................................$6,995 2007 Canycom Concrete Buggy, #005019, 16 Cubic Ft., Full Rubber Track, Robin Power..............................................................................................$6,995 2003 Stone 65CM-E Drum Mixer, #347352, 2HP Electric Motor, 6cu ft Capacity, Towable ......................................................................................$1,450 2008 Stone 1285PM Mortar Mixer, #008220, 12 Cubic Ft. Capacity, Honda Gas, New Paint ............................................................................................SOLD 2002 Stone 1285PM Paddle Mixer, #347331, 11hp Honda, Gear Driven, Towable ....................................................................................................$2,500 2008 Wacker WL30, #012156, 143 Hrs, Perkins 2007 Wacker CRT36-24A Riding Trowel, #004104, 6' width, 24 hp Honda, 12 hours ..........................................................................................................SOLD Diesel, cab w/ heat, aux. hyd, 4438 lb straight tip2007 Wacker CRT48-31V-E Riding Trowel, #004105, New, Never Used, 31hp ping load, 6857 lb. operating weight, 54" bucket .... Vanguard, Electronic Steering, 8’ Overall Width......................................$13,250 ..................................................................$37,000 2007 Whiteman/Multiquip HTX-44 8’ Riding Trowel, #009098, Hydro Drive and Steering, Diesel, 125 Hrs..................................................................$16,995 2006 Whiteman/Multiquip STH-55 10’ Riding Trowel, #001672, Hydro Drive and Steering, Diesel, 144 Hrs..................................................................$19,000

Forklifts

2006 SkyTrak 6042 Telehandler Forklift, #372050, 779 Hrs, OROPS, 50" Tilt Carriage, Cummins Diesel, 6000 Lb. Capacity, 42' Max Height ..............$56,700 2007 SkyTrak 6042 Telehandler, #54500, OROPS, 50" side-tilt carriage, 550 hours ......................................................................................................$54,500 2007 SkyTrak 6042 Telehandler, #002414, Cummins, Open ROPS, Side-Tilt, Choice of Carriages, 650 Hours ..............................................................$49,900 2006 SkyTrak 8042 Telehandler Forklift, #372063, cab, side tilt carriage 1450 hours ......................................................................................................$55,500 2007 SkyTrak 8042 Telehandler, #002406, OROPS, 50" side-tilt carriage, new .. ................................................................................................................$73,500 2006 Lull 944E-42 Telehandler Forklift, #365499, Side tilt, Choice of Carriages, 3200 hours ............................................................................$52,500 2004 Lull 944E-42 Telehandler Forklift, #365022, open ROPS, side tilt carriage, 2400 hours ....................................................................................$49,000 2005 Lull 944E-42 Telehandler Forklift, #808846, 1725 Hrs, OROPS, 50" Side Tilt Carriage, Cummins Diesel, 9000 Lb Capacity, 42' Max Height..........$64,000 2002 Lull 1044C-54 Telehandler, #16875, Cummins, Cab, 48" Side-Tilt carriage, Ready to Work ..............................................................................$53,500 2005 Lull 1044C-54 Telehandler, #365404, cab and heat, side-tilt carriage, 3700 hours ..............................................................................................$66,500

Pavers

2005 LeeBoy 8816 Paver, #007698, grade & slope controls, sonic augers, 8'15', 1350 hours ......................................................................................$89,500 1994 LeeBoy 1000 Municipal Machine (serviced), #010897, 2200 Hours, Nice ..................................................................................................................$7,950 2007 LeeBoy 5000 Pathpaver, #005542, 165 Hours, Very Nice ............$59,500

Aerial Lifts

Features

• Automatic fork leveling system for precision load placement • Side-mounted engine for easy access and serviceability • Stabil-Trak stability system for increased operator confidence • Cummins engine with 4-speed powershift transmission for efficient control • Variety of attachments for high versatility in handling jobsite challenges

• Automatic fork leveling system for precision load placement • Tier II compliant John Deere diesel engine • 4-speed powershift transmission for efficient control • Full-time 4WD for increased maneuverability • Standard front outriggers for increased stability • Variety of attachments for high versatility in handling jobsite challenges

12520 Quentin Ave. South, Suite 100, Savage, MN 55378

800-888-9515

Features 2007 SkyTrak 10054 Telehandler, #005300, 60" SideTilt Carriage, New Tires, 1531 hours ..................$79,900 2007 Atlas Copco XAS 185 Air Compressor, #007042, 400 hours ......$8,495

1999 Stone PDB54 Pad-Foot Roller, #347083, New paint, blade, OROPS, 1050 hours ..$19,750

AUTHORIZED DEALER FOR JLG • SKYTRAK • LULL

2002 JLG 600S Boom Lift, #328035, 4x4, diesel, SkyPower generator, cold weather start package, 3500 hours ........................................................$42,500 2002 JLG 600S Boom Lift, #328036, 4x4, oscillating axles, diesel, 3500 hours.. ................................................................................................................$45,500 2005 JLG 800S Boom Lift, #328081, 4x4, diesel, SkyPower generator, cold weather start package, 1750 hours ........................................................$94,500

Generators/Air Compressors

2007 Atlas Copco XAS 185 Air Compressor, #007042, 400 Hours..........$8,495

Excavators/Skid Loaders

2004 Komatsu SK1020, #427117, 400 Hrs, Open ROPS ......................$18,900 2005 Komatsu PC35, #427164, OROPS, rubber tracks, backfill blade, 531 hours ......................................................................................................$29,900 1999 Komatsu PC30, #906240, 1877 Hrs, Rubber Tracks, Backfill Blade, OROPS ....................................................................................................$23,000 2004 Komatsu PC78US-6, #013379, 5450 Hrs, Backfill Blade, Road liner pads, cab, A/C, tinted windows, 24" bucket ......................................................$42,500 2008 Wacker WL30, #012156, 143 Hrs, Perkins Diesel, cab w/ heat, aux. hyd, 4438 lb straight tipping load, 6857 lb. operating weight, 54" bucket ......$37,000

Lull 944E-42

Lull 1044C-54 Series II

Compaction

1999 Stone PDB-54 Pad-Foot Roller, #347083, New paint, blade, OROPS, 1050 hours ..............................................................................................$17,995 1999 Stone RP1350D Plate Compactor, #347039 ..................................$5,995 2007 Wacker BPU3050A Reversible Plate Compactor, #005779, low hours, 9hp Honda ................................................................................................$3,650 2005 Wacker RT-82SC Trench Roller, #47524, 36" width, remote control, articulating, 310 hours ..................................................................................$19,900 2003 Wacker RT-820 Trench Roller, #475439, 32" width, pad foot drums, diesel, remote control, 542 hours ..........................................................$16,000

• Automatic fork leveling system for precision load placement • Side-mounted engine for easy access and serviceability • Stabil-Trak stability system for increased operator confidence • Cummins engine with 4-speed powershift transmission for efficient control • Variety of attachments for high versatility in handling jobsite challenges

2007 Wacker BPU3050A Reversible Plate Compactor, #005779, low hours, 9hp Honda ............$3,650

Scarifier

1999 Bartell Scarifier, #404461, 8" cut width, Honda..............................$1,995 2008 Edco CPM-8-5B Scarifier, #009411, 8" Wide Drum, 5HP/230V Electric Motor, 220 Lbs, 1/8" Depth @ 350-500 sq ft per Hour ............................$2,095 2008 Edco TG-10 Turbo Grinder, #009410, removes 1/16" of concrete @ 400500 sq. ft per hour, 10" diamond headed disc, 11 hp Honda ....................$2,595 2007 Edco TG-7 Turbo Grinder, #005053, removes 1/16" of concrete @ 300400 sq. ft per hour, 7" diamond headed disc, 2 hp electric ......................$1,795

Features

2004 Komatsu PC78US-6, #013379, 5450 Hrs, Backfill Blade, Road liner pads, cab, A/C, tinted windows, 24" bucket ..................................$42,500

East Metro/Southeastern MN Tom Major 612-710-1941

Western MN & West Metro Jeff Sisk 612-282-2099

South Metro/Southwestern MN Tim Rients 952-292-6285

Central MN Lyle Knutson 320-894-6500


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

OFF ROAD HAULERS

Komatsu WA180-1, 1996, EROPS, Quick Coupler, Exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . .$46,500 Komatsu WA250-3PT, 1999, EROPS w/AC, JRB coupler, bucket, forks 20.5x25, good cond. . . . .$63,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . .$100,000 Cat 936E, 1989, EROPS, 2.75 cy GP bkt, clean . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,000 New Holland LS170 Skid Steer, 2004, 300 hrs . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,000 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$66,000

Komatsu CD60R-1 Crawler Dump Truck, 1997, 360° rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66,000 Terex TA40, 2000, 6WD, 6x6, 40 ton Detroit 60 Series, Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142,500 Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt .$115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . . . . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites $89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500

COMPACTORS IR DD22, 1993, 39" double steel, vibratory, Deutz dsl, water spray, v. good . . . . . . . . . . . . . . . . . . . .$18,500 IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 Cat 825B, 1975, cab, S-blade, 50% front, 20% rear tires, good runner, can go to work . . . . . . . . .$52,500 Cat 825C, 1988, EROPS, S-blade w/tilt, rear 80%, front 60%, good condition . . . . . . . . . . . . . . . . .CALL Galion S4-6B, Deutz dsl, hydrostatic, 42” drums, transport wheels, water spray . . . . . . . . . . . . .$4,800 Hypac C747B, 2001, articulated, vibratory, 47” drums, water spray, Deutz 2 cyl, 5500#, good condition . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500 Hypac C850B, 1999, ROPS w/cab, 84” smooth drum, drive, Cummins, 18-26 tires . . . . . . . . . . . . . .$47,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 (2) Champion Superpac A421 . . . . . . . . . .$11,500

CRAWLER TRACTORS Cat D4H Series II, 1990, OROPS, 6 way blades, 18" pads, draw bar, 100% Cat U/C . . . . . . . . . . .$57,000 Cat D6H, 1988, OROPS, S-blade w/tilt . . . .$76,000 Cat D6H LGP Series II, 1993, EROPS, diff steer, drawbar, 30" pads, fresh undercarriage . . . .$89,000 Cat D6H, 1987, Semi U blade w/tilt, ROPS, fair U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,000 (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea Komatsu D37P-5, 1997, 24" Pads, OROPS, P/S . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36,500 LANDSCAPING

Case 480 Broom Tractor, frt mounted 6' sweepster broom, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . .$13,000 Case/IH 485 Utility Tractor,1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . . . . .$11,500 Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hyd lift, exc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd CRAWLER LOADERS Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt . . . . .. angle tongue, scrapers, 2” axles . . . . . . . . . . . . .$9,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500 AIR COMPRESSORS Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000 IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . . . .CALL

SPECIALS TRUCKS & TRAILERS Vermeer 5800 Trencher, 1997, 4 cyl dsl eng .$17,500 (2) 48' Box Vans w/Liftgates, Good Condition . . . . .. (12) IR L6-4MH Light Plants, 1992-1995, all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL IAmerican Augers 16" Boring Machine, 10 HP gas, CRUSHING & CONVEYING 35,000# thrust, 30' track . . . . . . . . . . . . . . . . . . . .$7,500 Power Screen, Mark II, 1987, Port. Screening Plant, BACKHOES Double Deck, 24'x40' . . . . . . . . . . . . . . . . . . .$36,000 Cat 416C IT, 2000, 4x4, OROPS, Quick Coupler, GP Viper 301 Portable Screening Plant, 1997, dsl, 5'x7'. Bkt, Extendahoe . . . . . . . . . . . . . . . . . . . . . . . . .$36,000 Case 580L Rubber Tire Loader Backhoe, 1997, side & rear conveyors, T/A carrier . . . . . . . . . . .CALL OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . . .$24,500 DRILLS Volvo BL70, 2003, 4x4, Extend-A-Hoe, EROPS, 24" Bkt, Like New . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,500 John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 MOTOR SCRAPERS Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good John Henry Drill Mtd on Cat 320L, 1994, 24' drill, condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL carousel, dust collector . . . . . . . . . . . . . . . .$162,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL CRANES

HYDRAULIC EXCAVATORS JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick coupler, 6-7000 hrs, Fleet maintained . . . . . . . . .$39,000 Hitachi UH181, 1985, Equipped w/hammer . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000 Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, operational . . . . . . . . . . . . . .$10,500/OFFER Cat 215BLC, 1985, 7'3" stick, 28" TBG pads, 10 roller U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31,500 Cat 313B-CR, 2001, zero tailswing, A/C & AM/FM, JRB quick coupler . . . . . . . . . . . . . . . . . . . . .$93,000 Kobelco SK200LC Extra Long Reach, 1993, 32" TBG pads, 42' reach, nice . . . . . . . . . . . . . . .$68,500 Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC750 LC-6, 1999, 454 hp, 27” boom, 11’10” stick, 44’ DGB, aux plumbing, bucket choice, 24k ctwt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$255,000 Komatsu PC400 LC-6LK, 1999, 10’6” stick, JRB coupler, 31.5” TBG, ctwt removal, choice of bkt .$77,500 Komatsu PC400 LC-6LK, 11’1” stick, 35.5” TBG, ctwt removal, choice of bkts, working everyday . .$97,500 Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . .$205,000

Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Drott 3330B Carry Deck, 7.5 ton capacity, dsl, 4 section boom 8' jib . . . . . . . . . . . . . . . . . . . . . . . .$14,500 Shuttlelift Model 3330 ELB Hyd. Carry Deck Crane, duel fuel, elec. winch w/remote control, exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,500

MISCELLANEOUS (2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition . . . . . .$4,000 ea.

ATTACHMENTS BUCKETS PC1000, 84" Digging Bucket . . . . . . . . . . . .$9,500 Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 (5) Cat 936/926/950 pallet forks, for a Balderson quick coupler, exc. cond. . . . . . . . . . . . . . . . . . . .$3,500 Ea Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.


Page 10 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

249 W. Lake Street • Elmhurst, Illinois 60126

(888) 832-9830 Fax: (630) 832-6735

www.hartstractor.com

Sales, Rentals, Shop & Field Service, Portable Align Boring & Bore Welding Only 3885 original hours

Where Service Comes First! Crawler Loaders

1974 Caterpillar 977L S/N 11K06703, OROPS, GP Bucket W/Teeth............. ................................................................................................................$25,000 1971 Caterpillar 977L S/N 11K03983, OROPS, GP Bucket W/Teeth............. ................................................................................................................$24,000 2003 Caterpillar 963C S/N 2DS02393, EROPS, Air, GP Bucket W/Teeth..... ..............................................................................................................$145,000 2001 Caterpillar 963C S/N 2DS02101, EROPS, A/C, GP Bucket W/Teeth, 90% U/C ................................................................................................$95,000 2000 Caterpillar 963C S/N 2DS01069, EROPS, Air, GP Bucket W/Teeth, Good U/C..............................................................................................$105,000 1996 Caterpillar 963B S/N 9BL01328, EROPS, No Air, GP Bucket W/Teeth ..................................................................................................$79,500 1999 Caterpillar 953C S/N 2ZN02364, OROPS, GP Bucket W/Teeth, 1600 Org. Hrs ..................................................................................................$92,500 1996 Caterpillar 953C LGP S/N 2ZN00437, OROPS, 4+1 Bucket W/Teeth . ................................................................................................................$64,000 1988 Caterpillar 953 S/N 20Z2083, OROPS, GP Bucket W/Teeth, New Engine ....................................................................................................$42,000 1985 Caterpillar 953 S/N 20Z0530, OROPS, New U/C, GP Bucket W/Teeth, C/P ..........................................................................................$37,500

2003 Cat 963C, S/N 2DS02393, EROPS, Air, GP Bucket W/Teeth..............$145,000

Grinders

Bitelli SF102 Grinder S/N 95990017 ................................................$135,000 Bitelli SF60 Grinder S/N 01025, No Conveyor ..................................$44,000 Bitelli SF60 Grinder S/N 980199 ........................................................$52,000 Remax 4800 Grinder S/N 9948312601, 48" Cat 260HP Pull Type 12" Depth ......................................................................................................$49,000

Compactors

1986 Caterpillar 815B Conv S/N 15Z00374, EROPS Cab, Excellent, 7300 Hrs ........................................................................................................$100,000 1978 Caterpillar 815 S/N 91P1326, Cab, ST Blade, No A/C ............$79,500 1978 Dynapac CC42A DD Roller S/N 547D25, 66" Double Drum, Cat 3208 Diesel, Water System ..................................................................$16,000

Only 1800 original hours

Wheel Loaders

1999 Cat 953C, S/N 2ZN02364, EROPS, GP Bucket w/ Teeth, 1800 Hrs ....$92,500 Low hours

1972 Case W-14 S/N 9110608, EROPS Cab, New Transmission, New Tires, C/P ................................................................................................$16,000 1999 Caterpillar IT38G S/N 7BS00652, EROPS, A/C, 20.5x25 Tires, 2249 – ECM shows 9139, 3.5 Yd Bkt W/ Boe ............................................$75,000 1992 Caterpillar IT28B S/N 1HF02365, EROPS, 17.5x25 Tires, @ 95% Matched, 2.5 Yd Bkt, 8214 Hrs ............................................................$39,000 1968 Caterpillar 966C S/N 76J110, Cab, Heat, Lights, New Engine, Needs Pin Work, Tires Fair ..............................................................................$21,000 1990 Caterpillar 936E S/N 33Z04157, EROPS, New Trans, GP Bucket W/BOE, C/P ..........................................................................................$54,000 1987 Caterpillar 936 S/N 33Z2474, EROPS, New 20.5x25 Radials, GP Bucket W/BOE ......................................................................................$44,000 1986 Caterpillar 936 S/N 33Z1950, EROPS, New 20.5x25 Radials, GP Bucket W/BOE ......................................................................................$44,000 1975 Clark 55B S/N 416C-793-CAC, EROPS, GP Bucket, New Engine ..... ................................................................................................................$16,000

Crawler Tractors

1997 Caterpillar D-8R S/N 7XM01828, OROPS, SU Blade, New U/C, New Engine, C/P, 9200 Hrs ................................................................$199,000 1994 Caterpillar D-5C S/N 9DL00406, 6605 Hrs, New Trans..........$39,500 1980 Caterpillar D-5B LGP S/N 46X0504, New Engine, C/P ..........$32,500 Caterpillar D-4C S/N 1RJ1417, OROPS ............................................$29,000

Combo Loaders

2002 Caterpillar 430D IT S/N BML02305, 4x4, EHOE, Q CPLRS, A/C, Plumbed, New Tires ..............................................................................$49,500 1988 John Deere 510C S/N 746646, EROPS, Cab, 4x4 ....................$17,000

Motor Graders

1985 John Deere 670A S/N 509900, Cab, Frt Scarifier, 12' MB, 5200 Org Hours ......................................................................................................$26,500

Hydraulic Excavators

1998 Caterpillar 315BL S/N 3AW00489, Plumbed Mech Thumb + Bucket . ................................................................................................................$69,500 1999 Caterpillar 301.5 S/N 3YW00647, ROPS, Dozer, Rubber Tracks, Plumbed ..................................................................................................$14,000 1993 Caterpillar E120B S/N JF1206, 9312 Hrs ..................................$21,000 1995 Gradall XL 4100 S/N 411264, 360° Boom Bucket, Cummins Power Up+Down, A/C ......................................................................................$70,000 1976 Gradall 660C S/N NP24078, Detroit Up + Down, One Bucket $8,500 1996 Komatsu PC-200 LC-6, S/N A82010 Plumbed QC 48" Bucket, C+P ... ................................................................................................................$47,000 1979 Linkbelt LS-3400 S/N 49H4639 ................................................$28,000

Bitelli SF102 Grinder, S/N 95990017 ...... ..................................................$135,000

Skid Steers

1997 Bobcat 863 S/N 514415821, 75HP, Turbo Diesel, 66" GP Bucket, C/P ................................................................................................................$13,500 1997 Case 90XT S/N JAF0245761, Cab, Heat, Lights, 33x15.5x16.5 Tires @ 90% ....................................................................................................$15,000

Member of:

Off Road Trucks

New engine

1996 Volvo A-25C S/N 5350V50826, 30% Bridgestones, 4200 Org. Hours . ................................................................................................................$79,500

Trucks

1998 Cronkhite Tag Trailer......................................................................$3,000

Scrapers

Caterpillar 615 S/N 46Z1391, OROPS ................................................$35,000 Caterpillar 615 S/N 46Z1266, OROPS ................................................$35,000 1973 Caterpillar 613 Scraper S/N 71M2400, OROPS, 23.5x25........$15,000 1974 Terex TS-14 B Scraper S/N 17U0T58092, OROPS. 471 Detroit, 29.5 X 25, Unit 401........................................................................................$35,000 1976 Terex TS-14B Scraper S/N 17U0T59817, OROPS, 471, Detroit, 29.5x25, Unit 402 ..................................................................................$35,000 1976 Terex TS-14B Scraper S/N 17U0T59847, OROPS, 471, Detroit, 29.5x25, Unit 403 ..................................................................................$37,000 1976 Terex TS-14B Scraper S/N 17U0T61098, OROPS, 471, Detroit, 29.5x25, Unit 404 ..................................................................................$35,000 1976 Terex TS-14B Scraper S/N 17U0T61111, OROPS, 471 Detroit, 29.5 X 25, Painted, Unit 405 ........................................................................$37,000 1976 Terex TS-14B Scraper S/N 17U0T61483, OROPS, 471 Detroit, 29.5 X 25, Unit 406........................................................................................$37,000 1976 Terex TS-14B Scraper S/N 17U0T62163, OROPS, 471 Detroit, 29.5 X 25, Unit 407........................................................................................$35,000 1977 Terex TS-14B Scraper S/N 17U0T62951, OROPS, 471 Detroit, 29.5 X 25, Unit 408........................................................................................$45,000 1977 Terex TS-14B Scraper S/N 17U0T63684, OROPS, 471 Detroit, 29.5 X 25, Unit 409........................................................................................$47,000 1977 Terex TS-14B Scraper S/N 17U0T64121, OROPS, 471 Detroit, 29.5 X 25, Unit 410........................................................................................$35,000 1978 Terex TS-14B Scraper S/N 17U0T64161, OROPS, 471 Detroit, 29.5 X 25, Unit 411 ........................................................................................$37,000 1978 Terex TS-14B Scraper S/N 17U0T19820, OROPS, 471 Detroit, 29.5 X 25, Unit 412........................................................................................$35,000 1978 Terex TS-14B Scraper S/N 17U0T2165, OROPS, 471 Detroit, 29.5 X 25, Unit 413 ............................................................................................$38,000 1978 Terex TS-14B Scraper S/N 17U0T65614, OROPS, 471 Detroit, 29.5 X 25, Unit 414........................................................................................$40,000 1979 Terex TS-14B Scraper S/N 17U0T65882, OROPS, 471 Detroit, 29.5 X 25, Unit 415........................................................................................$37,000 1979 Terex TS-14B Scraper S/N 17U0T67340, OROPS, 471 Detroit, 29.5 X 25, Unit 416........................................................................................$45,000 1980 Terex TS-14B Scraper S/N 17U0T68628, OROPS, 471 Detroit, 29.5 X 25, Unit 417........................................................................................$40,000 1981 Terex TS-14B Scraper S/N 17U0T69174, OROPS, 471 Detroit, 29.5 X 25, Unit 418........................................................................................$39,000 1986 Terex TS-14B Scraper S/N 17U0T1700, OROPS, 471 Detroit, 29.5 X 25, Unit 419 ............................................................................................$50,000 1986 Terex TS-14B Scraper S/N 17U0T72718, OROPS, 471 Detroit, 29.5 X 25, Unit 420........................................................................................$54,000 1986 Terex TS-14B Scraper S/N 17U0T72943, OROPS, 471 Detroit, 29.5 X 25, Unit 421........................................................................................$50,000 1986 Terex TS-14 B Scraper S/N 17U0T73053, OROPS. 471 Detroit, 29.5 X 25, Unit 422........................................................................................$50,000 1986 Terex TS-14 B Scraper S/N 17U0T73059, OROPS. 471 Detroit, 29.5 X 25, Unit 423........................................................................................$50,000 1986 Terex TS-14B Scraper S/N 17U0T73060, OROPS, 471, Detroit, 29.5x25, Unit 424 ..................................................................................$50,000 1987 Terex TS-14B Scraper S/N 521263, OROPS, 471, Detroit, 29.5x25, Pilot Controls, Unit 425 ........................................................................$54,000

1997 Cat D8R, S/N 7XM01828, 9200 orig. hrs., new rails, rollers & sprockets, 0 hrs on engine, new U/C ....................$199,000

1999 Cat IT38G, S/N 7BS00652, EROPS, A/C, 20.5x25 tires, 2249-ECM, shows 9139, 3.5 yd bkt w/BOE ................$75,000

Components

Caterpillar 615 Transmission ..................................................................$7,000 Detroit 4-71 Engines Exch Detroit 6V-71 Engine New Caterpillar 3306 Engine Caterpillar 963 Engine Caterpillar 966D Transmission Detroit 50 Series Engine Caterpillar 963 Transmission Perkins Diesel 4 Cyl 65 HP ........................................*NEW* (5) $4,750 Ea IH T444E Diesel 7.3 250 HP W/Radiator ..................*NEW* (4) $5,900 Ea New Duramax 6.6L Diesel 210HP ............................................(2) $7,000 Ea

MISC.

Amida Light Plant, New Gen. ................................................................$7,000 Bobcat Dozer Blade, Hyd New..............................................................$3,600 Bobcat Trencher, Used, Hi Flo................................................................$5,500 Coleman CJ4D40SQ 40K W Portable Generator Set, S/N 4982862, John Deere diesel, Super Quiet Pack....................................................$12,500 Crane Forks ..............................................................................2 @ $600 Each IR Electric Air Dryer S/N 96ADXRO142, 460 Volt 3 phase..............$2,000 TB425X BTI ............................................................................................$7,500 Kent Hyd. Brkr KHB8G11......................................................................$9,500 NPK Plate Compactor, 33"X24" Swivel................................................$5,500 Grove RT 58 Crane Caterpillar 963 Mitsubishi Caterpillar 966C

Parts Machines

One of 25 In Stock & Ready to work!!! All have had needed repairs, Ready for Dirt. $35,000-$50,000


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 11

View us at: www.amstate.com

PAVERS / ROAD WIDENERS MAULDIN 690FT - ‘08 • 8' to 13' gravity fed track paver (LOW HOURS), 29 hrs.......... ..........................................................................................................................$42,500 MAULDIN 1750C - ‘08 • 8' to 16' conveyor fed track paver (LOW HOURS) ....$95,000 MIDLAND SP-6 - ‘09 • Legal load, Rt hand discharge to 6', low hrs................$99,500 MIDLAND SPD-8 - ‘09 • Dual discharge to 8', low hrs ..................................$149,950 MIDLAND SPD-8 - ‘04 • Dual discharge to 8', 300 hrs ..................................$119,500 NEAL 5500 - ‘08 • “Cart Path Paver”, track, conveyor fed, 5'-8' screed, 140 hrs .......... ..........................................................................................................................$49,950 CALL items may be on rent causing pricing and hours to vary.

ROLLERS INGERSOLL RAND DD90HF - ‘06 • 66" high freq, dbl drum vib, w/lites, 1300 hours .. ..........................................................................................................................$70,000 INGERSOLL RAND SD105DX - ‘04 • 84" smooth drum soil with 1020 hrs ......$53,500 INGERSOLL RAND DD65 - ‘91 • 57" dbl drum vib, 3500 hrs, “fully functional” ............ ............................................................................................................................$9,500 INGERSOLL RAND DD112HF - ‘06 • 78" high freq. dbl drum vib w/ lites and mat temp sensor, 950 hrs ................................................................................................$70,000 SAKAI CR270 - 36", 3000lb, 4000VPM, vibratory, 200 hrs ..............................$13,500 SAKAI SW320 - ‘09 • 47" Dbl Drum vib w/ Foldable ROPS, EPTW, 75 hrs ......$30,500 SAKAI SW330 - ‘07 • 51", 6700lb, 4000VPM, dbl drum vib with 320 hrs, warranty...... ..........................................................................................................................$29,950 SAKAI GW750 - ‘09 • 77" Pneumatic vibratory roller w/ heat shields, 300 hrs.............. ........................................................................................................................$123,500 SAKAI SW850 - ‘09 • 79" Dbl Drum vib, EPTW w/ 350 hrs ..............................$95,000

GROVE TM890

MANITOWOC 777

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for: GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • KAWASAKI WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT

CRANES

SIMPLICITY portable dual screen plant, 6x16 and

GROVE RT760 60 TON CAPACITY ROUGH TER-

6x20 triple deck horizontal screens, 60"

RAIN CRANE, 1993, with Cat Diesel, 110’

underscreen conveyors, 42" cross conveyors, tri-axle chassis with hydraulic leveling ..$199,800 CEDARAPIDS 4136 Portable twin roll plant, with

RUBBER TIRED EXCAVATORS LIEBHERR A900C - ‘06 • Rubber tired exc., outriggers, dozer blade, LIKUFIX quick coupler 100% from cab, 79" ditch w/rotation, 41" exc and blank for hammer, 551 hrs ........................................................................................................................$139,950 GRADALL G3WD - ‘90 • County owned, v good condition with ditching and excavating buckets, 4500 hours ..................................................................................$17,500

MOTOR GRADER PSI MD413XT - ‘08 • 10' moldboard, front bucket, rear scarifier, enclosed cab, 133 hp, 14,000 lbs, 120 hours ................................................................................$84,950

COLD MILLING MACHINE TEREX PR165 - ‘09 • 24” cutting width, 4 large rubber tires, large front loading conveyor, 300 hrs ................................................................................................$175,000 TEREX PR330T - ‘08 • 4 track, front loading, milling machine with “combo cutter” 2',3',4' widths, 850 hours ..............................................................................$279,000 WIRTGEN W50 - ‘04 • 20” cutting width, 4 wheeled, rear discharge conveyor, 250 hrs ..........................................................................................................................$95,000

Contact Marty in Illinois 1-800-307-0221 mahrendt@amstate.com Photos & Detail Descriptions view: www.amstate.com

Allis 5'x16' single deck horizontal screen,

Power-Pinned Boom, 32’ to 56’ Telescopic Offsettable Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ............................ ......................................Reduced to $219,900 GROVE TM890 90 TON HYDRAULIC TRUCK

Cummins V-12 diesel, on tandem axle chassis

CRANE, 1991, with a 114’ full power boom, 33’

with hydraulic leveling..........................$68,000

to 58’ Telescopic Offsettable Swingaway, Grove

ALLIS H400-SD portable cone plant, Cummins

Model HO30B-26 Main and Auxiliary Hoists,

diesel, rear feed conveyor, side discharge con-

Cummins 6BT5.9 superstructure engine, on a

veyor, tandem axle chassis with run-on

Grove 8x4 carrier with a Cummins NTC400 Big

hydraulic jacks ..................................$172,800

WHEEL LOADERS KAWASAKI 95Z-V, wheel loader (2006), 340 hp Cummins QS15 diesel, 4/3 speed Powershift

Cam III diesel, 13 speed Roadranger, and a Nelson tandem-axle boom dolly ........$235,000 MANITOWOC 777 175 TON CRAWLER CRANE, 2000 model, 220' main boom, 40' fixed jib, hoists with free-fall option, 48" track shoes,

transmission, 29.5x25 Bridgestone L3 radials, 7

Series II counterweight, self-assembly package,

cu. yd. GP bucket, enclosed ROPS with a/c ......

Cummins diesel, third drum, 7000 hours, job

..........................................................$259,900

ready ..................................................$950,000

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113


Page 12 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Great Used Equipment Values ARTICULATED TRUCKS

CRUSHERS

GRAPPLES

TRACK LOADERS

1970 EUCLID B30, S/N 62E1958 ........................$13,000 1970 EUCLID B30, S/N 62E1821 ........................$13,000 1970 EUCLID B30, S/N 62E1816 ........................$13,000 1970 EUCLID B30, S/N 62E1957 ........................$13,000 2004 JCB 714, S/N E0830195 ............................$53,600 2004 JOHN DEERE 400D, S/N BE400DT201041 .............. ..........................................................................$135,200 2006 KOMATSU HM300-0, S/N A11002 ..........$131,600 1994 VOLVO A25C, S/N A25V8715 ....................$33,500 (2) 1994 VOLVO A30, S/N V1487 ..............From $30,100 (2) 1998 VOLVO A35C, S/N V5086 ............From $42,700 2001 VOLVO A35D, S/N 61113 ..........................$73,000

2006 BL PEGSON 1000SR, S/N 100312DDSR ..$362,000 2004 CEC 102X115, S/N 4538 ..........................$161,500 2007 EAGLE 1200-25, S/N 30696......................$346,300 2003 EXTEC 1013, S/N 7864 ............................$200,500 2001 EXTEC MEGA-BITE, S/N 6024 ..................$136,200 2006 IROCK RDS15H, S/N P90216 ..................$451,300

2007 PEMBERTON CAST, S/N C/EGR-004-4-0606 .......... ............................................................................$11,600 (3) 2007 PEMBERTON MATERIAL, S/N MDG300-194-50607 ....................................................................$11,600

(2) 2000 JOHN DEERE 555G, S/N 890992 ..........$21,500 2005 TAKEUCHI TL140, S/N 21402461 ..............$17,000

CURB & GUTTER MACHINES

2006 RAMMER S-27, S/N 27AAA0667 ..................$8,600 2003 STANLEY MB50EXS, S/N 2279 ....................VALUE!

2008 Bengal TG1000P ..........................................$9,600 2005 GOMACO GT3600, S/N 902900-641 ..........$90,400 2006 GOMACO GT3600, S/N 902900716 ..........$120,000

DRILLS

ASPHALT PAVERS 1999 BLAW KNOX PF161, S/N 16126-04 ..........$24,300 1998 BLAW KNOX PF3172, S/N 317211-08 ......$29,500 2000 LEEBOY 8500, S/N 2497-8500 ..................$18,500

BACKHOE LOADERS 2006 DEERE 410G, S/N 946106 ..........................$46,000 2005 JCB 214 SERIES III, S/N 904421 ................$20,700 2004 JOHN DEERE 210LE, S/N T0210LE882955.............. ............................................................................$16,000 2002 JOHN DEERE 310G, S/N 907184 ................$24,200 2004 JOHN DEERE 310SG, S/N 926142 ..............$29,000 2004 JOHN DEERE 710G, S/N 939117 ................$45,000 2003 VOLVO BL70D, S/N 10269 ..........................$28,200

CHIPPER 2002 CBI 4000B, S/N 4840HZK34123A0660 ....$152,000

COMPACTORS 2004 AMPAC P33/23, S/N 33071104 ....................$6,000 2001 BOMAG BW142PDB-2, S/N 136510511036 ............ ............................................................................$14,000 1994 DYNAPAC CA151PD, S/N 59810775 ..........$21,700 2000 DYNAPAC CA250PD, S/N 65320989 ..........$31,100 1996 FORD LN8000, S/N 1FDXR82EXTVA27463.............. ............................................................................$11,000 2006 HAMM 3410, S/N H1690654 ......................$37,000 2006 HAMM 3410, S/N H1690638 ......................$38,000 2006 HAMM 3410, S/N H1690694 ......................$38,000 1988 INGERSOLL RAND DD90, S/N 5454S ........$13,000 2000 INGERSOLL RAND PT125R, S/N 164701 ..$21,000 2005 INGERSOLL RAND SD100D, S/N 151759 ..$61,500 1998 INGERSOLL RAND SD100F, S/N 154044....$29,000 1997 INGERSOLL RAND SD70D, S/N 148473 ....$19,500 2000 INGERSOLL RAND SD70D, S/N 163541 ....$27,000 2000 INGERSOLL RAND SD70D, S/N 165166 ....$27,700 1999 INGERSOLL RAND SD70F, S/N 157999......$19,000 2006 INGERSOLL RAND SD70F, S/N 191728......$37,400 2003 INGERSOLL RAND SD77F, S/N 174481......$24,500 2005 INGERSOLL RAND SD77F TF, S/N 179314.............. ............................................................................$27,500 (2) 2005 SAKAI SV505T, S/N VSV16-40175........$44,600 1999 STONE 3100 WOLFPAC, S/N 2699294 ........$3,000 1999 Vibromax W1103D, S/N JKC8302602 ........$33,200 2003 VIBROMAX W1105D, S/N JKC8305009......$32,500 (2) 2006 WACKER BS50-2I, S/N 88591....................$800 (2) 2003 WACKER RT820, S/N 5396924 ..............$6,500 (4) 2006 WACKER RT82SC, S/N 5671753 ............$9,200

CONCRETE PUMPS 2000 CONCORD CCP 36M15, S/N 1M2K197C21M017771 ......................................$121,500 1999 Mack MR688, S/N 1M2K189C5XM013746.............. ............................................................................$89,800 2004 MACK MR688S, S/N 1M2K197C74M023571 .......... ..........................................................................$182,300

CONVEYORS 2005 POWERSCREEN 1400, S/N 6614644 ........$101,500 2006 POWERSCREEN M85, S/N 6103501 ..........$38,500 2007 RADIAL CONVEYOR STACKING, S/N 24X60-070101 ....................................................................$12,200

2006 ATLAS COPCO ECM590, S/N 11457 ........$161,500 2008 DITCH WITCH JT1220, S/N J1220A80000278 ........ ............................................................................$64,000 2007 DITCH WITCH JT520, S/N CMWFT5XXE70000081.. ............................................................................$40,000

EXCAVATORS 2001 BOBCAT 331D, S/N 232511818 ..................$12,200 2002 BOBCAT 341D, S/N 233212073 ..................$19,100 2001 DAEWOO S170-V, S/N 1041 ......................$30,000 2001 DEERE 200LC, S/N 501934 ........................$32,000 2004 DEERE 330CLC, S/N 82918 ........................$54,500 2004 HITACHI EX550LC, S/N 7417 ....................$124,100 2006 HITACHI ZX350LC-3, S/N FF00ASP920074 ............ ..........................................................................$100,000 2004 JOHN DEERE 160C, S/N FF160CX044325 .............. ............................................................................$47,500 1998 JOHN DEERE 230LC, S/N FF0230X060077.............. ............................................................................$33,200 2004 JOHN DEERE 330C LC, S/N 082992 ..........$67,000 2003 JOHN DEERE 330CL, S/N 082448 ..............$59,000 2005 JOHN DEERE 330CL, S/N 083241 ..............$76,000 2005 JOHN DEERE 330CL, S/N 804394 ..............$76,000 1999 JOHN DEERE 330LC, S/N FF0330X080564.............. ............................................................................$39,500 2004 JOHN DEERE 330LC, S/N 082657 ..............$67,000 2003 JOHN DEERE 450CLC, S/N FF450CX091265 .......... ............................................................................$80,300 1999 JOHN DEERE 450L, S/N FF0450X090297 ..$49,000 1999 JOHN DEERE 450LC, S/N 90419 ................$51,700 1988 JOHN DEERE 790D, S/N 790DL007763......$12,200 2006 KOBELCO 70SR, S/N YT0306041 ....................POR 2002 KOBELCO SK200SR, S/N YB0201701 ........$38,500 2001 Kobelco SK250, S/N LL08U0421................$35,900 1998 KOBELCO SK300LC, S/N YCU0961 ............$24,500 2004 Kobelco SK330, S/N YC07-U0745 ..............$50,100 2003 KOBELCO SK480, S/N YS06U0273 ............$56,000 2007 KOMATSU 78MR, S/N 1002449..................$43,500 2001 KOMATSU PC300LC, S/N A84699 ..............$50,000 2000 KOMATSU PC300LC-6LE, S/N A84629 ......$45,500 (2) 2004 KOMATSU PC300LC-7, S/N J20408......$87,500 2003 KOMATSU PC400LC-6, S/N A85328 ..........$85,000 2005 KOMATSU PC600LC-7, S/N 20108 ..........$225,000 2007 TAKEUCHI TB145, S/N 14516716 ..............$34,100 2007 TAKEUCHI TB175, S/N 17515812 ..............$53,400 2003 VOLVO EC210BLC, S/N EC210BLC11522 ..$49,800 2007 VOLVO EC210CL, S/N 210C110192 ............$75,000 2003 VOLVO EC240BLC, S/N V10780..................$58,500 (6) VOLVO EC330BLC, S/N V10081 ..........From $60,800 2005 VOLVO EC360BLC, S/N 11632 ....................$93,600 2006 VOLVO EC460BLC, S/N 80037 ..................$139,500

FORESTRY 2002 JOHN DEERE 843H, S/N 882070 ................$49,000 1993 MORBARK WOLVERINE, S/N 4172 ............$19,800 2000 MULTITEK 3040-90XP FIREWOO, S/N 5050200 .... ............................................................................$36,500 2005 TIMBER KING TK722, S/N C10300205 ....$109,500 2005 WARATAH HTH622B, S/N 622342 ..............$48,500

HAMMERS

HORIZONTAL GRINDERS 2007 MORBARK 4600XL, S/N 188-1042 ..........$382,800

LIFT TRUCKS 2007 CLARK CMP70, S/N CMP570D-0894-9590 ............ ............................................................................$31,400 2006 GEHL RS5-34, S/N RS5JW0912223 ..........$26,000 2007 GENIE GTH-5519, S/N 16804 ....................$31,500 (2) 2004 KOMATSU FG35ST-7, S/N 103491..........$8,500 1994 Moffet M5000, S/N 4414 ..............................$4,400 (2) 2005 PRINCETON PB-50, S/N P10462 ..........$18,200 2000 Skytrak 8042, S/N 13340............................$21,100 (2) 2006 TAYLOR THC-300S, S/N 33008 ..........$100,000 2006 TAYLOR THC-400L, S/N 33106 ................$116,500

MISCELLANEOUS 2007 DITCH WITCH FX30, S/N FX30X0436 ........$27,500 1996 INGERSOLL RAND 185, S/N 144690 ............$3,800

TRACK TYPE TRACTORS 2001 DEERE 550H, S/N 898990 ..........................$31,000 2004 DEERE 650H, S/N 930092 ..........................$35,500 2004 DEERE 650H, S/N 931730 ..........................$35,500 2004 DEERE 650H LGP, S/N 926713 ..................$46,500 2004 DEERE 700H, S/N 938631 ..........................$52,500 2000 JOHN DEERE 450H, S/N 883527 ................$23,500 2003 JOHN DEERE 450H, S/N T0450HX913212 $27,500 2007 JOHN DEERE 450J LGP, S/N 117871 ........$40,800 1998 JOHN DEERE 650G LGP, S/N 84881.......... $24,500 (3) 2000 JOHN DEERE 650H, S/N 891545 ...................... ..................................................................From $29,500 2005 JOHN DEERE 850JLT, S/N TO850JX113640 ............ ..........................................................................$117,000 2004 KOMATSU D39EX-21A, S/N 1578 ..............$39,600 2004 KOMATSU D39EX-21A, S/N 1553 ..............$39,600 (2) 2005 KOMATSU D39EX-21A, S/N 1721 ........$45,100

TRACTORS AG 2002 MASSEY FERGUSON 243, S/N J23115 ........$6,100 2005 MASSEY FERGUSON 461, S/N EP10060 ......$9,200 (4) 2003 MASSEY FERGUSON MF451-4, S/N BN15020 .. ....................................................................From $7,000 2002 McCORMICK F70XL, S/N PFKCM50202 ....$11,200

MIXER

TRAILER - REEFERS

(3) 2006 MACK CV713, S/N 1M2AG11C16M030801........ ............................................................................$78,000

MOTOR GRADERS

(2) 1999 TRAILER HEATED, S/N 1GRAA0620XB024202 .. ..............................................................................$3,900 1997 TRAILER REFRIGERATED, S/N 1GRAA062XVB089443 ..........................................$7,300

2004 JOHN DEERE 670CH, S/N DW670CH590183 .......... ............................................................................$82,100 2000 KOMATSU GD530A-2, S/N 210391 ............$51,500 2004 KOMATSU GD655-3C, S/N 51038 ............$112,300

2007 SMITHCO SL24034, S/N 1S9SS40227L476357 ...... ............................................................................$33,000

TRAILER SIDE DUMP

MULTI-PROCESSOR

TRENCHER

2002 Labounty UP30, S/N UP30204 ..................$26,200

1999 DITCH WITCH 3700LJ, S/N 3X0647 ............$3,900

PULVERIZER

TRUCK CRANES

1973 Bros LSPRM8A, S/N 4150 ............................$6,000

1987 LIEBHERR LTM1160, S/N 12413 ..............$295,200 1988 MACK RD690SX, S/N 1M2P199C7JW003016 ........ ............................................................................$62,000 2006 STERLING LT7501, S/N 2FZHATDCX6AV55737 ...... ..........................................................................$152,400

SCRAPERS - MOTORS 1988 JOHN DEERE 862B, S/N 744221 ................$17,000 (3) 1979 TEREX TS14B, S/N 17U0T61100 ...................... ..................................................................From $13,000

SCRAPER - PULL TYPE 1975 ROME R67H, S/N R67H10516 ......................$1,500

SCREENING PLANTS 2007 EXTEC E7, S/N 10502 ..............................$155,000 2006 WILDCAT 510 COUGAR, S/N 1W9SS26156F351462 ........................................$63,500

SKID STEER LOADERS 2002 BOBCAT A300, S/N 539911335 ..................$17,100 2007 DITCH WITCH XT850, S/N CMWXT850C8C80000256....................................$16,500 1998 JOHN DEERE 8875, S/N 040509 ................$10,000

SKIDDER 2003 JOHN DEERE 648G-III TC, S/N 588699 ......$45,500

STABILIZER/RECLAIMER 2005 ZIPPER AZ-480HD, S/N 109FS08235U022988........ ............................................................................$35,000

TUB GRINDER 1999 DIAMOND Z 1352BL1, S/N 1D9FX4232XN147001 .. ..........................................................................$150,800 2007 Vermeer TG7000, S/N 1VRY4536271000154 ........ ..........................................................................$378,000

WHEEL LOADERS 1999 DEERE 644H, S/N 572749 ..........................$46,700 1999 JOHN DEERE 444H, S/N DW444HX573676 ............ ............................................................................ $26,500 1999 JOHN DEERE 544H, S/N 572508 ................$35,000 2000 JOHN DEERE 624H, S/N 578008 ................$41,000 2003 JOHN DEERE 724J, S/N 588116 ................$70,500 (2) 2006 KAWASAKI KSS65Z-V, S/N 65C4-5475 .............. ..................................................................From $53,200 1998 KOMATSU WA180-3L, S/N A90247 ............$27,400 1997 KOMATSU WA250, S/N A70085..................$24,200 2006 KOMATSU WA250PT-5L, S/N A79287 ........$63,000 1998 KOMATSU WA450-3, S/N 53217 ................$36,900 2001 VOLVO L70D, S/N V19086 ..........................$41,400 2005 VOLVO L70E, S/N V60611 ..........................$71,000

Machines are located in various parts of the U.S. Please call for locations and pricing. Visit our website at FCCEF.com for pictures and more information. Call Darold Longhofer at (904)625-9259 or Cell (904)610-7939 or Home (904)880-3587. Allen Breinig at (904)625-9290. Tom Camphire at (904)625-9263. In Mexico call Luis Ramirez at 01 81 24 51 42 34 or cell 044 81 15 08 47 96. El Cercado (Monterrey) NL. Email daroldlonghofer@fccef.com. thomascamphire@fccef.com allenbreinig@fccef.com

FCC EQUIPMENT FINANCING (A Caterpillar Company) Jacksonville, FL Darold Longhofer (904)625-9259 • Cell (904)610-7939 • Home (904)880-3587


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 13

NEW M SERIES IN STOCK! Authorized Bobcat® Dealer New M Series E32 Excavators

New M Series Track Loaders

New M Series Skid Steer Loaders

Skytrak Telehandler, Call for Pricing

V723 Piling Snow

S250 w/Snow Blade

NorTrac Bulldozer, Make Offer

USED EQUIPMENT ®

Authorized Bobcat Dealer Bobcat 440 ................Starting at $4,500 Bobcat 463’s ..............Starting at $8,000 Bobcat 542B ..............Starting at $6,900 Bobcat 642 ..............................$7,500 Bobcat 642B ............................$8,500 Bobcat 743 ................Starting at $8,000 Bobcat 751 ......Several Starting at $9,900 Bobcat 753 ..............Starting at $10,000 Bobcat 763F, Series, Open Cab ....$11,500

Bobcat 773G, With Heat ............$15,900 Bobcat 843, Heated Cab ............$10,000 Bobcat 853’s ............Starting at $11,000 Bobcat 863C, With Heat ............$12,900 Bobcat 863G ............................14,900 Bobcat 873 ............................$17,900 Bobcat S130, 2006, Heated Cab ......CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours....Starting at $14,900 Bobcat S250..............Starting at $14,500

Compact Track Machines

Bobcat T190’s............Starting at $15,000 Bobcat T200..............Starting at $15,000 Bobcat T250, Gold ......Starting at $24,500 Bobcat T300..............Starting at $25,000

Other Brands

Gehl 4615 Skidloader, Open Canopy $8,500 Mustang 2105 ............................CALL (2) New Holland LS170..................CALL John Deere 250/260/320 Models Available ..............................................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys ..................Starting at $15,900 Bobcat 334 ................................CALL Bobcat 337D, A/C, HT ................$35,900 Bobcat 341 ..............Starting at $29,990 Bobcat 442 ....Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500 www.farmriteequip.com U.S. Hwy 12 W Dassel, MN 55325

320/275-2737 • Toll Free 888/679-4857


Page 14 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

First Impressions Shine for Bobcat T630 M-Series Loader In today’s economic environment, Superintendent Bob Brzezinski is constantly looking for ways to keep costs down while still getting his projects done. His solution: Buy Bobcat loaders and attachments to do the same work as larger, single-application conventional units. Brzezinski oversees the maintenance and construction of approximately 50 mi. of roadway. “We use Bobcat loaders for grading, sewer work, backfilling trenches, asphalt repairs, demolition, and disaster cleanup,” he said. “The Bobcat loaders make it so much easier when we’re doing construction work. They’re easier [to maneuver] than a big wheel loader on our job sites. We’re often working in congested streets and nearby areas, and parking is always an issue.” First M-Series Loader Atlas Bobcat sold Brzezinski the first M-Series loader — a T630 compact

track loader — to complement the department’s S220. “When we lay sewer pipe and the ground gets wet, the tracks make it easy for us to backfill,” he said. In addition to the benefits of a rubber track undercarriage, Brzezinski said a number of M-Series loader improvements were noted immediately. Here’s what he had to say about four important areas:

• Visibility: “The visibility is great with the bigger windows. We can easily see the cutting edge on the bucket, and I like the larger window on top when we’re loading trucks.” • Pressurized cab: “This is the first machine that I’ve ever owned with an enclosed cab with heat and air conditioning. It’s so quiet. We don’t hear the noise from the machine and the other noises outside, and the dust stays out completely.” • More cab space: “I’m a big guy, so I like the added room and more space to operate the controls.” • Pushing performance: Brzezinski said his department has a conventional wheel loader and the new T630 will out-push it. “It’s got a lot of power for the size of machine.”

Maine Township Highway Department Superintendent Bob Brzezinski (R) was the first Bobcat M-Series customer in the United States and Canada. He is pictured here with his salesman, Todd Swartz of Atlas Bobcat.

Attachments Replace Dedicated Machines Brzezinski believes in having an assortment of

attachments rather than stocking larger, specialized single-use equipment. His attachment inventory includes the following: • Augers • Brushcat rotary cutter • Buckets • Dozer blade • Hydraulic breakers • Industrial buckets with grapples • Planers • Snowblowers • Sweepers “I try to buy attachments to minimize the amount of equipment in our department and the money we spend,” he said. “We don’t have the room to store the bigger equipment, so it’s better to have one loader and various attachments rather than a specialized piece. We work off of tax dollars, so we try to make every dollar stretch.” For example, Brzezinski said his department will use its asphalt planer to patch holes in the roads instead of contracting out the work. Brzezinski has benefited from the Bobcat municipal program at a time when budgets are tightening. He’s strongly considering trading in the S220 for a new S630. This story was reprinted with permission from Bobcat WorkSaver Magazine, Fall 2009 Issue.

Dawes Rigging & Crane Rental Donates to Rawhide Boys Ranch Dawes Rigging & Crane Rental, a member of the ALL Family of Companies, held its 17th Annual Golf Outing on Aug. 10. More than 125 people participated, including Dawes customers, equipment manufacturers, and Dawes and ALL management. Through mulligans, raffles, and a silent auction, they raised $6,000 to benefit Rawhide Boys Ranch in Wisconsin. Steve Freckmann, Dawes’ general manager, presented the check to Dave Borash, Rawhide’s development manager, on Sept. 11. Rawhide is a faith-based, non-profit residential care center offering moral guidance,

encouragement, therapeutic counseling, specialized education, and work experience for troubled teen boys. Freckmann decided five years ago to make the annual event more meaningful by benefiting a local charity. He said the choice of Rawhide Boys Ranch grew out of his wish “to help boys and young men who are at risk for making wrong choices that can lead to a life of failure and broken dreams. I was very blessed to have a wonderful father and mentor who kept me on the right path.” He added, “A number of young men who have worked for Dawes could have benefited from a program

like Rawhide; some of these young men washed out because they came from homes without a father figure and lacked a strong work ethic and a sense of purpose. Now we have a chance to give back and help these atrisk youths so they may someday enjoy the same opportunities that many of us take for granted.” Freckmann added, “I’m grateful to our customers for coming out during this tough economic time and for their generosity in donating to help these young men.” Dawes has donated to other charitable causes through the years, including United Way, the Boys & Girls Club, Second

Harvest, and the Milwaukee Rescue Mission. ALL Family of Companies President Michael Liptak said, “We are proud that Dawes’ generosity upholds the ALL Family of Companies’ commitment to the communities in which we work.” Dawes is a certified dealer of new equipment for Broderson, Elliott, Genie, Gradall, JLG, Link-Belt, Lull, National Boom Trucks, Peiner, Potain, Skyjack, Sky Trak, Snorkel, Shuttlelift, and Terex for Wisconsin. For more information, call 800/236-5335 or 414/453-5335 or visit www.dawescrane.com.

Foley Equipment Acquires Martin CAM Expo’s Show to Hand Tractor; Adds 50 Counties in Kan. Out Green Project Award Foley Equipment Company has acquired Martin Tractor Company as of Nov. 2. With this acquisition, Foley Equipment will add an additional 50 counties and offer an enhanced set of resources to deliver even better and more comprehensive customer service and business solutions throughout Kansas. Foley is a dealer for Caterpillar, AGCO, AgChem and

Trimble as well as a number of other manufacturers. Foley Equipment is the Caterpillar and Challenger dealership for all of Kansas except Doniphan, Atchison, Leavenworth, Wyandotte, Johnson, and Cherokee Counties. For more information, call 316/943-4211 or visit www.foleyeq.com.

The 2010 CAM Expo will be held on one day only, Feb. 3, 2010, at the Rock Financial Showplace in Novi, Mich. This event will be packed with activities from start to finish: exhibitors displaying construction products and services; the CAM 124th Annual

Meeting with guest speaker; ongoing CAMTEC education classes; the CAM Magazine 2009 Special Issue Awards and Green Project of the Year Awards; and more. Show hours are 10 a.m. to 6 p.m. For booth information, call Expo Manager Ron Riegel at 248/972-1000.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 15

Gary Carlson Equipment: Your trusted local source for slide rails and trench boxes now stocks a complete line

352 7(& 6KLHOGLQJ 6KRULQJ DQG 6OLGH 5DLO 6\VWHPV

'85$ %$6( $1' $/7851$ *URXQG 3URWHFWLRQ 0DWV

*HQHUDWRUV DQG /LJKW 7RZHUV

of construction equipment and supplies.

&RPSDFWLRQ Equipment

$LU &RPSUHVVRUV DQG 3QHXPDWLF 7RROV

:HOOSRLQW 6XEPHUVLEOH DQG +\GUDÿRZ 3XPSV

And you thought we just did trench boxes

0LQL ([FDYDWRUV DQG 6NLG 6WHHUV

Gary Carlson Equipment Co. 5HQWDOV s 6DOHV s 6HUYLFH s 'HOLYHU\ 0DQNDWR 6W s %ODLQH 01 s


Page 16 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Erb Equipment Acquires K & W Equipment in Ind., Ky. Erb Equipment Companies, a John Deere Construction and Forestry dealer, has acquired K & W Equipment Company locations in Evansville, Ind., and Owensboro, Ky. “The deal went though on Nov. 1,” Melissa Geiler, consumer product support assistant of Erb Equipment, confirmed. Geiler noted that Erb Equipment’s territory will now cover 26 counties in Western Kentucky and 13 counties in Indiana. K & W Equipment now will go under the banner of Erb Equipment Company and most of K & W’s employees including Dick Christ, manager of the Owensboro location, have joined the Erb team. With more than 200 employees, Erb Equipment is one of the oldest suppliers of John Deere Construction machinery. During the past 65 years, Erb has grown to nine locations serving more than 109 counties in Eastern Missouri, Southern Illinois, Western Kentucky and Indiana. Erb Equipment is an authorized dealer for John Deere, Bomag, Trail King, NPK hammers, Genesis attachments, Double D, and Stihl. For more information, visit www.erbequipment.com.

Erb Equipment Companies has acquired K & W Equipment Company locations in Evansville, Ind., and Owensboro, Ky. Pictured is the Owensboro store.

Erb Equipment’s headquarters is located on 200 Erb Industrial Drive in Fenton, Mo.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 17

THINK ABOUT THE POSSIBILITIES

Albert Medcalf Office: (502) 456-4050 Cell: (502) 592-6510

Martin McCutcheon Office: (614) 824-9162

ent Construction Equipm ... Guide Special Pricing G! Say You Saw it in CE

www.ruddequipment.com

END OF YEAR REDUCTION! 1990 Grove 2004 Cat 140H RT528C, S/N 00640 with S/N 74355 with 5692 hours; Cat 7838 hours, Cummins Engine; Engine; Work Lights; Cab Fans; AM/FM PAT Computer Stereo; 14' with Anti Two Moldboard; Air Block; 28'-70' Dryer Boom; 23'-43' JIB $150,000 $87,000

MORE POWERFUL THAN A THUMB OR GRAPPLE! • • • •

Ideal for Demolition and Land Clearing Rugged Bucket Digs and Loads Wide, See-Through Clamp Easy, Low Cost, No Weld Installation Perfect for Multi-Machine Fleets

ROCKLAND MANUFACTURING CO.

800-458-3773

DEDICATED TO INCREASING PRODUCTIVITY

Learn More! www.rocklandmfg.com/kk

2006 Hitachi ZX160LC, S/N 1F1Q-006331 with 1,210 hours; Isuzu Engine, A/C, Heat, 16'10" Boom; 10'2" Stick; Bucket $85,000

2000 Komatsu WA250-3, S/N A78003 with 5,072 hours $70,000

2003 Hitachi ZX200LC S/N ARH-310232 with 4623 hours; Bucket; AM/FM Radio; 9'7" Stick $80,000

2004 Euclid/Hitachi EH1000 S/N 77254 with 4378 hours; Heated Bed; 65 Ton Bed $525,000

2000 Volvo A40, S/N 60536 with 8,639 hours Call For Pricing

2004 Volvo L110E S/N 60237 with 21603 Hours; Volvo Engine; A/C; Heat; Boom Suspension; Solid Tires; JVC CD Player $100,000

2006 Volvo BL70, S/N 10992 with 2035 hours; Volvo Engine; Extended Stick; Heat; A/C $65,000

1998 Volvo L330C S/N 60414 with 22788; Volvo Eninge; A/C; Boom Suspension; Spade Nose Bucket $115,000


Page 18 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Jan. 20-22, 2010 San Antonio, Texas

Pioneer Construction Recognized for Safety Performance Pioneer Construction, one of the largest full-service general contracting, designbuild, and construction management companies in Michigan, has received the 2009 Construction Safety Award of Excellence from the Western Michigan Chapter of the Associated Builders & Contractors (ABC), a construction industry association. “Assuring a safe work environment for all of our employees and business partners has always been a top priority at Pioneer. Our people are our greatest asset. This recognition is clearly a reflection of our team’s efforts to improving safety on every project,” said Tim Schowalter, president and CEO of Pioneer Construction. “Pioneer is proud to be recognized for this commitment and will continue to implement safety-oriented programs and policies at all of our work sites.” The ABC Construction Safety Award of Excellence is the highest safety honor presented by the organization. It recognizes companies with exemplary safety performance and programs, as well as companies that exhibit a continued commitment to job site safety by maintaining outstanding safety programs, policies and procedures. Member companies that receive the award must demonstrate to an ABC evaluation team that

safety for their employees is an on-going effort and concern. “Western Michigan ABC is proud to congratulate Pioneer Construction for its success in maintaining a very high level of construction workplace safety,” said John Doherty, president and CEO of the Western Michigan Chapter of ABC. “Pioneer has truly demonstrated its dedication to ensuring a safe environment for all employees, and it is an honor to recognize that achievement with our 2009 Construction Safety Award of Excellence.” Pioneer also was recognized for three projects that received ABC’s Excellence in Construction Awards, recognizing outstanding construction projects from across the nation. The company received an Excellence in Construction award in Renovation, which acknowledges renovation of existing buildings. The Fitzgerald renovation project transformed a former YMCA building, a classic colonial revival building originally constructed in 1915, into luxury condos in downtown Grand Rapids, Mich. For the Pre-Engineered Building catego-

ry, Pioneer won the Excellence in Construction award for its work on the Grand Valley State University Laker Turf Building. This building was designed to pro-

lanes, multi-purpose rooms for various student activities, student locker/shower rooms and more. The entire building also is LEED Certified. The Excellence in Construction award for Structural Steel Erection was granted to Pioneer due to the work done on the Helen DeVos Children’s Hospital located in Grand Rapids, Mich. Today, the hospital is a regional referral center dedicated to improving the health and lives of children and families.

“Our people are our greatest asset. This recognition is clearly a reflection of our team’s efforts to improving safety on every project.”

About Pioneer Construction Founded in 1933, Pioneer Construction is one of the largest full service general contracting, designbuild, and construction management Tim Schowalter companies in Michigan offering a Pioneer Construction full range of construction services. Headquartered in Grand Rapids, Mich., Pioneer emphasizes the company’s commitment to build on the values, quality, and service of the past with the vision and innovation of a new genvide more recreational opportunities to the college’s student population. The complex eration. For more information, visit www.pioneerconsists of 138,000 gross sq. ft. including a six lane 300 m indoor track with nine sprint inc.com.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 19

WHATEVER YOUR HYDRAULIC KIT REQUIREMENT MAY BE...

Whatever the carrier machine, and whatever the attachment, the friendly professionals at HydrauliCircuit Technology stand ready to deliver the hydraulic kit that you need. Our new stateof-the-art 35,000 square foot installation, production, and research facility is designed to enhance our product and capabilities, and to enable us to carry on the reputation for excellence that we have cultivated during our twelve years of constant growth and improvement.

WE’RE ON TOP OF IT!

Digital automated tube bending, phase-pulsed automated welding, and in-house powder-coating capabilities are just a few of [OL YLÄULTLU[Z [OH[ PUJYLHZL the quality and value of every kit we sell.

If you have ever installed a competitor’s hydraulic kit and thought... “somebody should do a better job with this!”, ...then give us a call with your next kit requirement , because....

We do, and we’re ready to prove it!

^^^ OJ[RP[Z JVT

*\Z[VT KLZPNULK MVY `V\Y ZWLJPÄJ HWWSPJH[PVU 6US` [OL TVZ[ YLSPHISL HUK K\YHISL JVTWVULU[Z HYL \ZLK 9VI\Z[ LUNPULLYPUN (IZVS\[LS` JVTWSL[L ,HZ` [V PUZ[HSS


Page 20 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

B C usiness

alendar

November 18, 2009 – Meeting. The Delaware Contractors Association (DCA) has scheduled a Human Resources Management Committee Meeting in the DCA Boardroom in Newark, DE. For more information, fax Nancy Handlin at 302-994-8185. November 19-20, 2009 – Convention. The Ohio Aggregates & Industrial Minerals Association (OAIMA) is going to hold their Annual Meeting & Convention at the Columbus Easton Hotel in Columbus, Ohio. For more information, visit their website at www.oaima.org or call to make reservations at 614-414-5000. December 2-3, 2009 – Forum. The National Utility Contractors Association has scheduled the Safety Directors Forum (SDF) at the New York Hotel, Las Vegas, NV. For further information please contact the NUCA at 703-358-9300. December 10, 2009 – Legislative Breakfast. The Delaware Contractors Association (DCA) will hold a Legislative Breakfast in the DCA Boardroom in Newark, DE. For further information, fax Nancy Handlin at 302-994-8185. December 14-15, 2009 – Winter Conference. Ohio Contractors’ Assoc. Winter Conference Midwest, Columbus, OH. For more information call 800-229-1388 or 614-488-0724. January 10-13, 2010 – EXPO ‘10. National Utility Contractors Association Utility Construction Expo, Walt Disney World Dolphin Hotel, Orlando, FL. NUCA is located in Arlington, VA. Call 703-358-9300 for further information. January 13-15, 2010 – EXPO ‘10. AG CONNECT Expo - Preview Day January 12, 2010 (by special admission), Orlando, FL. AG CONNECT Expo provides a world-class international forum for agriculture industry professionals to share global agricultural ideas and management trends. For information please call 800-867-6060. February 7-10, 2010 – SHOW. THE RENTAL SHOW returns to Orlando, FL at the Orange County Convention Center. The show will be in the NorthSouth building, which is where the 2006 Show was held. Exhibitors and Rental Store Attendees can call 800-334-2177. February 27 to March 3, 2010 – International Hardware Fair. International Hardware Fair Cologne 2010, Cologne, Germany. For more information regarding this event contact Chris Beavers, Koelnmesse, Inc. at 773-326-9928. March 17-20, 2010 – CONVENTION ‘10. Mark your calendar! AGC’s 91st Annual Convention will be held at the Marriott Orlando World Center in Orlando, FL. More information will be posted as soon as it is available.

Lexington, Ky. …

Link-Belt Holds CraneFest 2009 to Celebrate Its 135th Anniversary Link-Belt Construction Equipment Company held CraneFest 2009 at its world headquarters in Lexington, Ky., the week of Sept. 28. The event marked Link-Belt’s 135th Anniversary, and its 35th year at its Lexington facility. Link-Belt played host to representatives from its distribution network from around the world who, in turn, brought along their clients for entertainment and education. On the day of arrival, guests traveled by bus to tour some of Lexington’s horse country and famous landmarks followed by dinner. The next morning Link-Belt President and CEO Chuck Martz and Vice President of Sales and Marketing Bill Stramer spoke to the visitors about Link-Belt’s innovative, forward looking approach as a world leader in the crane

Link-Belt Crane and the American flag welcome attendees to Link-Belt’s CraneFest ’09.

Father and son team, Bob (L) and Kurt Kalhagen of Ideal Crane Rental Inc. in Milwaukee, admire a model RTC 80130 rough-terrain crane.

industry. The company continues to invest in the marketplace as evidenced by construction on a major addition to its manufacturing facility providing a total of 682,000 sq. ft. of space. As well as increased production, the company continues to work on developing new and innovative products, implementing improved manufacturing methods and improving materials for increased operating capabilities, efficiency and see CRANEFEST page 39

Link-Belt President and CEO Chuck Martz addresses an audience of dealers and contractors at CraneFest ’09.

(L-R): Visiting from the Lone Star State are Holt Crane & Equipment’s Pat Farquharson, Basden Steel CEO Bruce Basden and Holt Crane & Equipment General Manager Scott McDougle.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 21

Announcing of a good thing. Faster cycles.less Higher productivity Need a smaller track loader with big performance? Meet JohnThirty-plus Deere Don’t be fooled bythe imitators. CT315. It's experience lightweight and the agile, years’ building best yet it packshydrostatic 45 turbocharged horses into its dozers makes John Deere small the frame to deliver best-in-class brand for you. Innovations, like Total stability, breakout and Machine Controlforce, (TMC), visibility, allow operators wide-open service access. It's a snap to customize machine response and to transport between jobsites, too. operation to their personal preferences. And, with numerous available J-Series Dozers deliver unsurpassed Worksite ProTM attachments, there's productivity and uptime, along with the seemingly no end to the work you'll lowest possible daily operating costs. get done. Stop in and see the big And that’s just for starters. possibilities this small machine can bring to your business. To learn all about John Deere J-Series Dozers, give us a call.

Contact us us soon. Contact soon.

ROGERS & LONG LAKE, MN RDO Equipment Co. Burnsville, MN Matt Dull 952-890-8880 • mdull@rdoequipment.com

KR1CUWF0008N -00231728

Randy Thorstad 13725 Main Street • Rogers, MN 55374 Cell: (612) 840-3464 • Office: (763) 428-4107 Fax: (763) 428-2700 email: randy.thorstad@scharbers.com


Page 22 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LET ZM INDUSTRIES HE LP YOU WITH YOUR

SNOW REMOVAL NEEDS DEALERSHIPS ARE AVAILABLE

WHAT MAKES A ZM INDUSTRIES PUSHER SO VALUABLE? Adjustable rubber cutting edge Four bolt adjustable skid shoes Easy tie down plates 3/8� side plates Rigid beam design on rear of pusher Offered in both scoop in and universal q attach Hardened skid plates 1 1/2� Rubber cutting edge on all 300 & 400 series pushers Bolt on, scoop in and quick attach for 2500 series pushers Great marketing programs

CONTACT US TODAY

Sizes Available A ‡ 6HULHV Ň‹ 5HVLGHQWLDO ‡ 6HULHV Ň‹ Ň‹ Ň‹ /LJKW 'XW\ ‡ 6HULHV Ň‹ Ň‹ Ň‹ +HDY\ 'XW\ ‡ 6HULHV Ň‹ Ň‹ Ň‹ Ň‹ Ň‹ “The Bruteâ€? Commercial &+(&. 86 287 21 7+( :(% )25 '9' $1' 63(&6 21 7+( 386+(56

www.senecaironworks.com Cell Phone: (315) 277-0453

3KRQH ‡ )D[

Visionaire’s Model 2900 Ideal for Off Highway Vehicle Cab Visionaire Inc. of Grand Prairie, Texas, announced the Model 2900 remote coolant heater for applications where engine coolant is not readily available to heat an off highway vehicle cab. The compact model 2900 contains a Webasto coolant heater that uses diesel fuel to generate 8,600 to 17,000 btu/h (2.5 to 5 kW) of heat. The 2900 also houses the coolant reservoir, filters, pumps and plumbing necessary for a self contained heat source. An available auxiliary fuel tank can be mounted beside the unit, reducing exposed plumbing. Available alone or in combination with various Visionaire air handlers, the 2900 reduces the number of redundant components inside compact cabs. In crane, boom truck, and mining equipment cabs, design engineers often have to find space for both an air conditioner and a diesel air heater. Two separate systems mean separate inlet and outlet ductwork, blowers, and controls. Often placed under a seat pedestal or armrest, the heater becomes difficult to service

and is neglected. The 2900 allows cab designers the flexibility to integrate heating, cooling and cab pressurization into a single in-cab system keeping combustion, fuel and noise outside the cab. The 2900’s steel enclosure allows various mounting configurations and easy access for service. For more information, call 972/647-1056 or visit www.visionaire-inc.com.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 23


Page 24 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

HydrauliCircuit Technology Experiences Major Growth In 1996, David Perry, CEO of HydrauliCircuit Technology (HCT) was busy assembling and selling hydraulic kits for attachments from his garage. The company, which specializes in production of easy to install hydraulic kits to operate attachments or combination of attachments on excavators, loader backhoes and wheel loaders, wasn’t there for long, however, as growth came quickly for the Jonesboro, Ga., company; the following year Perry moved the operation out of the garage and into a 3,000 sq.-ft.facility and hired staff members. In 1998 he had to double his square footage required to build hydraulic kits, and then again in 1999. In 2009, he expanded yet again. This latest expansion puts HCT into a facility that is almost triple the size of the previous location — 35,000 sq. ft. — and was purposely designed by Perry and built for further expansion of his business. “The previous facility was only 13,500 sq. ft. and we were completely full. To accommodate production, we had to rent additional space in adjacent buildings,” Perry said. Situated on a 12.5 acre site located on a street appropriately named Fluid Drive, in McDonough, Ga., the new site was chosen to provide the company with plenty of space for expansion and loading and off-loading machines. The square footage is broken down to 25,000 for shop space and 10,000 for office. The new facility provides more space for design, assembly, shipping and storage of hydraulic kits. It also equates to providing HCT

The new 35,000 sq. ft. HydrauliCircuit Technology facility is located near I-75 at 250 Fluid Drive in McDonough, Ga.

with capabilities it did not have before, and is equipped with brand new machinery, including digital automated tube bending equipment; semi automatic phased pulse MIG welding; and in-house powder coating ovens for components. A new sandblast booth and phosphate steam degreaser will provide cleaned and degreased components to work on or to powder coat. There are a total of five shop bays, four of which are dedicated bays for in house hydraulic kit installation and can accommodate virtually any machine the company provides work on. “With more service bays we are able to accommodate more machines than ever before. We offer local dealers such attractive labor rates for installing the kits that they like to bring the machines to us. Having a particular model excavator or backhoe in our shop is

(L-R): Getting a jump on the day’s planning in their new conference room are key HCT staff members, including Bobby Hudson, national sales manager; Navin Baliga, president; David Perry, CEO; and Mike Davis, sales manager.

the best way to obtain engineering information for producing hydraulic kits on other like machines. When a machine is in our shop, we’re not only installing a hydraulic kit, we’re doing a comprehensive study on the machine’s hydraulic and electronic system to develop the technology and engineering for numerous kit designs on that model.,” said HCT president, Navin Baliga. All kits are custom built to match the machine and attachment specifications. In looking back at the progression of his business, Perry said, “our original customer base was end users back in the early days of the company. Business then expanded more to equipment dealerships, which quickly became our largest customer base. Now, we are

the OEM kit supplier to many attachment manufacturers. Most recently, we have begun to work with the carrier machine OEM’s. So we’re seeing the OEM as the direction for future business expansion. We think there will be opportunities with this new facility for the OEM’s to bring machines here. Whereas before, the hydraulic kits were shipped out and installed in the field, we can do research and development here for the OEMs. “We already are working with companies such as Komatsu, John Deere, CNH Corp. Kobelco,

With move in complete, it’s back to full production (but on brand new machines) as Dan Fields, special projects manager, works with the semi automatic tube bending machine and Brian McCormick (in background), production manager, is loading brackets and tubes in the powder coating oven.

Doosan, Link-Belt, Volvo, IHI, Kubota and Takeuchi. Right now, we are working with a manufacturer on engineering, design and development of wheel loader hydraulic kits for utilizing roll out buckets, hydraulic forks and different attachments where you need a third hydraulic function.” Recently, HCT plumbed a brand new John Deere 850D, 85-ton excavator, at their facility in McDonough which was transported from the port of Savannah, Ga. “Having a convenient location just off of Interstate 75, the JD850D was dropped off here for the work and then was transported on to the end user in Knoxville, Tenn. We anticipate more business being conducted in the same way in the future. Savannah is a major entry point for excavators and other machines coming into the U.S. We make it very convenient to drop off a machine at our facility to have the work done before being transported to its final destination,” Perry said. “Looking back, it seems like there has been a natural progression of starting with end users, then to equipment dealers, then onto attachment manufacturers, and now to the manufacturers of the carrier machines. It has been a lot of fun, and we are looking forward to the next phase of growth for our company,” Perry said. For more information, call 888/603-0080 or visit www.hctkits.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

The shop area is twice the size of the entire previous facility and is equipped with all the newest tooling that allows for a wider array of services the company can offer its customers.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 25

Visit: www.hulls151.com for Complete Inventory & Photos

2002 Volvo L190D

Cab, Heat, A/C, 7396 hours, Volvo QC w/ 3.5 yd. bucket, ride control, 20.5R25 tires @ 80%, exceptionally sharp, all original, lower hour loader, very tight, forks available ........................................................$66,900

RENTAL REDUCTIONS

PRE OWNED

*Buckets Sold Separately*

LOADER BACKHOES

LOADER BACKHOES

2005 CASE 580SM-II LOAD/BH - CAB,AC, HEAT, 4X4, A-HYD, X-HOE, PILOT-C, OPS CONV PAC, F-PADS, DBATT, GOOD CONDITION, 820 HOURS, SAINT LOUIS, MO (39276R) ..........$51,000

2005 CATERPILLAR 963C CAB,AC, 43K, 100"-3.5-CU/YD, 22" PADS, GOOD CONDITION, 2465 HRS, ST. LOUIS, MO (39648R) ..........$125,000

WHEEL LOADERS 2005 JD 444J, AC, 3307 hrs, QC w/2.5 yd bkt, 20.5x25’s, Sharp! ............$65,900 2002 Volvo L90D, 7396 hrs, AC, 3.5 yd bkt, RC, 20.5R25, 80%, Sharp! ..$66,900 2004 Komatsu WA250PT-5L, AC, QC, 4233 hrs, 3rd valve, 3 yd ..............$63,900 2004 Komatsu WA250PT-5L, AC, QC, 6316 hrs, 3rd valve, 3 yd ..............$61,900 2007 JD 544J, AC, 10,175 Light Duty Hrs, new tires & paint, Nice! ..........$62,900 2002 Volvo L70D, cab, AC, heat, QC, 3 yd bkt, 58” forks, Nice! ................$57,500 1997 Kawasaki 70Z IV, C/H, 7700 hrs, 3.5 yd, new paint, 95% L5 tires ....$44,900 2005 Cat 906, A/C, 2031 hrs, QC bkt & forks, new paint, Nice!..................$41,500 1994 Case 621B, C/H, 8712 hrs, 2.5 yd. bkt, New Paint & tires ................$39,900 2006 Case 621D, Cab, A/C, JRB QC, 6933 hrs, new paint, new tires ....COMING! 1998 JD 444H, cab, AC/heat, 12,218 hrs, QC w/2.5 yd bkt, Sharp! ..........$39,950 (2) 1978 JD 544B, C/H, 2 yd. bkt., 3976 & 11,000 hrs, Very Clean! ..........$17,950

LOADER BACKHOES & SKIP LOADERS 2007 CASE 570M XT, 297 hrs, AC, 4WD, Ride CTL, Turbo, 3 pt, bld ........$46,900 2005 JCB 214, C/H, 4x4, E-Hoe, Pilot Ctls, 919 hrs, 36” bkt., 3rd valve & Q/C to front bucket, (4/1 bkt avail), 50% tires, Like New Condition ........................$42,900 2005 Case 580SM II, cab, heat, 4x4, Ext. hoe, 4-in-1 bkt, 3272 hrs, Clean! ....Call 2005 Case 590SM II, cab, heat, std hoe, 4x4, 2888 hrs, X Sharp! ............$42,900

EXCAVATORS 2000 2003 1996 2003 2003 1996 2001 2000

Cat 325BL, AC, 5,119 hrs, aux hyd, sharp, local one owner ............$68,900 Cat 315CL, C/AC/H, 5021 hrs, 48” Bkt, V. Sharp & Tight! ................$58,900 Cat 320BL, C/AC/H, 8100 hrs, QC w/48” Bkt, 24” bkt avail ..............$51,900 Cat 311 CU, AC, 1894 hrs, zero turn, 34” bkt, Tight, Nice! ..............$45,900 Komatsu PC120-6E0, C/AC/H, 2380 hrs, plumbed, V Sharp! ..........$48,900 JD 590D, 6738 Hrs, Exc. U/C, 8'6" wide, Q/C w/36” bkt. Sharp! ......$31,500 Komatsu PC78US-5, A/C, 3738 hrs, rubber pads, new paint............$28,500 Bobcat 334 Mini, 928 hrs, Exc. Rubber Tires, Tight & Sharp! ..........$15,900

2006 2004 2000 2000 2000 1999 1995 1991 1979 1991 1997 1986

JD 650J, A/C, 6-way, 2700 hrs, Exc. U/C, Clean! ..........................COMING! JD 755C, CRL. LDR., AC, only 1631 Hrs, one owner, new uc ..........$84,900 JD 450H LT, cab, AC, 6 way, 2275 hrs, 75% UC, Very Sharp! ..........$39,950 JD 450H LGP, 3990 hrs, new UC, new poly paint..............................$35,900 Cat D3C XL, hystat, cab, heat, new Cat UC, 4110 hrs, Nice! ............$31,500 Komatsu D39E, 2545 hrs, 6 way, 85% uc, new paint, V. Good! ......$28,900 JD 550G IV, 6 way, 2703 hrs, 2 owners, Very Nice............................$26,900 Cat D4H, 5203 hrs, new Cat UC, 6-way, Very Sharp, 1 Owner! ........$32,900 JD750, cab, heat, str. blade w/tilt, low hours, 80% uc, Clean! ..........$23,910 JD550G, 6 way, 85% UC, new poly paint, Tight & Nice! ....................$23,900 Cat D4C, 6 way, 3652 hrs, 60% UC, Very Clean! ..............................$22,500 Case 450C, 6 way, 4674 hr, recent new UC and Paint, Exc! ............$17,500

2004 2004 2004 2005 2005 2000 2000 1998

Case 40XT, cab, heat, 925 hrs, aux hyd, 65% tires, Sharp! ..............$15,900 JD 250, cab, AC, 1239 Hrs, 50% 12x16.5 tires w/steel tracks ..........$14,950 Cat 257B, track skid steer, 1870 hrs, excellent UC Sharp! ................$16,495 JCB 506C, 1250 hrs, 6000 lb, 36’ reach ht, 90% tires, like New ......$28,900 Sky Trak 6042, 1700 hrs, 4WD, 42’ reach, 70% tires, tight, Nice......$29,750 Sky Trak 8042, 8000 lb, 42’ reach, 4675 hrs, 80% tires, Exc! ..........$25,900 JCB 506C, 6000 lb, 42’ reach, 3500 hr, good tires, Exc Cond!..........$19,500 JCB 930, 4x4, 6000 lb, 21’ strt mast w/side shift, Very Nice! ............$18,950

2005 CASE 590SM-II LOAD/BH - CAB,AC, HEAT, 4X4, A-HYD, X-HOE, PILOT-C, RIDE-C, OPS CONV PAC, DBAT, GOOD CONDITION, 1815 HOURS, SAINT LOUIS, MO (39382R) ..........$45,000

BOOM/MAN LIFT 1999 JLG 450A, Genie Z45/25J, 50' art. boom, dual fuel, Both Nice ........$17,900 1999 JLG 600S, 60' straight boom, 3800 hrs, dual fuel, Nice!....................$19,950

COMPACTION 2004 IR SD45D, 54" smooth drum, only 490 hrs ........................................$27,900 (SEE WEBSITE FOR PHOTOS)

HULL’S

IMPLEMENT 920-324-5341

www.hulls151.com Jct. Hwy 151 & 26 N.E. of Waupun, WI

2001 CASE 580 SUPER M L/BH - CAB,A/C, 4X4, X-HOE, RIDE-C, TWO LEVER, BUCKET-CPL, FPADS,TIRES / GOOD, 24” TOOTH, GOOD CONDITION, 5605 HRS, ST. LOUIS, MO (45576) ......................................$43,400 ROLLERS SUPERPAC 400P ROLLER ROPS, 40"-PAD FOOT W/ KNOCK DOWN BLADE, DIESEL, GOOD CONDITION, QUINCEY, IL (46864) ............................$5,400

TRUCKS

LOADERS

2005 CASE 450 LOADER ROPS,TIER II, 88 HP, FOOT-T, COLD START, 8,830LBS, 73"TOOTH, GOOD CONDITION, 560 HRS, QUINCY, IL (47523) ...... ......................................$23,600

1996 CASE 1840 LOADER ROPS, HAND-T, 10X16.5/GOOD, 63"-TOOTH, 54 HP, 5560 LBS, GOOD CONDITION, 1890 HRS, ST. LOUIS, MO (47206) ..$11,100 MISCELLANEOUS

SOLD

DOZERS

CRAWLER DOZER/LOADER

SKID STEERS & FORKLIFTS

2005 CASE 1850K (SERIES II) - CAB,AC, SEMI-U, 134" BLADE, 24" PADS, COLD START, CUMMINS, 190HP, GOOD CONDITION, 1590 HRS, O’FALLON, MO (39119R) ................$120,000

1998 NEW HOLLAND 2120 AGG LOADER - ROPS, 4x4, REGHOE, 3-POINT HITCH / PTO, 60"LOADER, Q-ATTACH, 24"-&-24"BH BUCKETS, 1060-H, GREAT CONDITION, SPRINGFIELD, IL (45274) ..........................$19,200

2005 CASE 450 LOADER ROPS,TIER-II, 88HP, FOOT-T, RIDE-C, 12X16.5/ GOOD, BUCKET COUPLER, 82"-TOOTH,W/ BOE, GOOD CONDITION, 595 HOURS, QUINCEY, IL (46653) ...... ......................................$26,500

2006 CASE 550H LGP DOZER - ROPS, 110”-B, PAT, 26”-GR, R-SCREEN, GREAT CONDITION, 590=H, ST. LOUIS, MO (42623R)$49,000

2006 CASE 340B HAUL TRUCK - CAB,AC, HEAT, 6X6, 79.366LB PAYLOAD, 456HP, 29.5XR25, BACKUP ALARM, COLD START AID, 63,900 LBS, GOOD CONDITION, 850 HRS, ST. LOUIS, MO (42906R) ..............................$220,000

LOADERS

SOLD

2005 TAKEUCHI TL130 CTL - ROPS, 67HP, BUALARM, 1500 HOURS, GOOD CONDITION, 1070 HRS, ST. LOUIS, MO (39726R)$17,500

ROLLERS 2003 CASE SV210 ROLLER ROPS, 66"-SHEEPSFOOT, 20,000LBS, SINGLE DRUM, 99HP, 35,970LBS OF CFORCE, ARTICULATED, BACK UP-A, 14.9X24, GOOD CONDITION, 1295 HOURS, ST. LOUIS, MO (36254R) ........ ................................$38,000

2003 CASE 90XT - ROPS, FOOTT, 33X15.5-16.5 HIPPO’S, BUCKET COUPL, BU-ALARM, 85HP, 8950 LBS, GOOD CONDITION, 2760 HOURS, ST. LOUIS, MO (47274) ..........................$14,500 1994 BOBCAT 753 LOADER ROPS, FOOT--C, 43.5HP, 10X16.5GREAT, 60” TOOTH, 4740 LBS, GREAT CONDITION, 1660-H, CASEYVILLE, IL (47687) ..$8,300

1995 RAYCO RG1625 STUMP GRINDER - TRAILER, GOOD TEETH, GAS,ANTI CREEP, 205-H, GOOD COND., ST. LOUIS, MO (45249)................................$7,000

TELEHANDLER

2005 TEREX TH636C TELEHANDLER - ROPS, 6,000LBCAP, 4X4, 4WS, 48" FORKS, DEERE TURBO, 99HP, 48" CAR, 36' MAX-L, 21' MAX-R, 13X24/FOAM, GOOD CONDITION, 4420 HRS, CAPE GIRARDEAU, MO (40173R) .... ................................$16,500

Contact Ted Rose or Tim Luby

636-343-9970 www.lubyequipment.com

MO: Saint Louis, Cape Girardeau, O’Fallon IL: Quincy, Caseyville, Springfield AR: Fort Smith

2005 TEREX TH844C ROPS, 8000 LB, 4X4, 4WS, 48” FORKS, DEERE TURBO, 99HP, 72”-CAR, 13X24/FOAM, 22,930 LBS, GOOD CONDITION, 4545 HOURS, HEBER SPRINGS,AR (38623R) .......... ................................$19,500


Page 26 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LIEBHERR EQUIPMENT IS BUILT TO LAST… THIS OFFER ISN’T!

0% FOR 36 MONTHS ON SELECT LIEBHERR EARTHMOVING EQUIPMENT OTHER RATES AVAILABLE

SOME RESTRICTIONS APPLY

PROGRAM EXPIRES NOVEMBER 30, 2009 SEE YOUR LOCAL LIEBHERR DEALER FOR DETAILS

4100 CHESTNUT AVENUE NEWPORT NEWS, VA 23607 USA PH 757-245-5251 FAX 757-928-8701 INFO@LCE.LIEBHERR.COM WWW.LIEBHERR.US


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 27

FINER RESULTS than ever before - in a SINGLE FINISH PASS.

‘It’s at least twice as fast.

Get FINISH QUALITY from your dozer and MAKE MORE

We‘re getting to grade faster,

MONEY by REDUCING the TIME and ENERGY it takes to get

and we don’t have to follow

Twice the speed & accuracy of any 3D system. You can GRADE AT FULL SPEED, and still achieve even

to grade.

it with a motor grader.’ 2

Topcon’s 3D-MC takes your operation to a whole new level.

Get there first!

Inertial sensor technology, combined with GPS, accurately controls the dozer’s blade at a speed of 100 times a second! Visit our site to view testimonials of real people using 3D-MC2.

Olin Ellsworth

It’s time.

Ronald Franks Company

topconpositioning.com/3dmc2

DIRT BUCKET

SNOW BUCKET

SKID STEER QUICK HITCH

PTO ADAPTER

ROCK BUCKET GRAPPLE

ROOT GRAPPLE

BIG RIPPER RY CTO VE A F BUY T & SA EC DIR

HYDRAULIC TREE & ROOT PULLER

BACKHOE

BUCKET GRAPPLE

WOOD SPLITTER

PALLET FORK

U-BLADE

LEVELING BAR

INDUSTRIAL TINE GRAPPLE

ROCK BUCKET

POST HOLE AUGER

UNIVERSAL TINE GRAPPLE

HH Fabrication and Repair 19150 Co. Road 20 • Winsted, MN 55395 • 320-485-2341 • Fax: 320-485-2165 • www.hhfab.com • EMail: hhfab@tds.net


Page 28 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

DON KOONTZ EQUIPMENT 6946 Lilac Road Plymouth, IN 46563

Case 850KLGP, 6 way $43,000 low time ............$

Link Belt 4300Q and Shear ................$ $97,500

Cat D5 W inch, 5 way $14,500 with tilt ..............$

Case 426B, 4x4 ext hoe .. $25,000 ........................$

Case 450CT, 700 hrs $24,000 since new ..........$

Cat 330CL, One owner .... $76,000 ........................$

(574) 936-4847 Komatsu D31P, low time 6 way ................................$ $15,000 Cat D5B, low time tilt ................................................$ $23,000 Case 580SL, 4x4 ext hoe, low time ............................$ $24,500 Ingersoll Rand SD100D Shell kit ................................$ $38,000 $16,000 Cat D4E Tilt power shift ROPS....................................$ Kobelco SK200LC Low Time ......................................$ $39,000 Cat 330BL, One owner ............................................$ $62,000 Link Belt 3400Q and Shear ......................................$ $97,500

Visit CEG’s Web Site at www.construction equipmentguide.com

Phone: 502-493-4380 Fax: 502-499-3180 ron_weir@bramco.com

Used Equipment DOZER '06 Komatsu D37EX-21A, w/EROPS, 6-Way Blade, 600 Hrs, BT8012................................$75,000 NEW SALE PRICE $50,200 EXCAVATORS '94 Komatsu PC200LC-6, w/Cab, 48" Bkt, Thumb, BT9701.......... ............................................................................................$23,000 '08 Komatsu PC160LC-7, w/Cab, AC, Hyd Thumb, Low Hrs, BT9402..............................................................................$116,000 '04 Komatsu PC228USLC3, w/Cab, BT8N04 ..................$63,000 '07 Komatsu PC138USLC-8, w/Cab, AC, Aux. Plumbing, BT9405 ............................................................................................$84,000 ‘06 Kobelco SK135SRLC, w/Cab, Offset Boom, BT8N03 ............ ............................................................................................$71,000 TRUCKS '05 Komatsu HM400-1 w/ 6000 hrs 40 ton artic truck, BT8814 .... ..........................................................................................$210,000 WHEEL LOADERS '04 Komatsu WA320-5 w/Cab, GP bkt, BT9806 ..............$51,500

Please call or check out our Web site for our Certified Rental Fleet Reduction Sale!

PILE

www.brandeismachinery.com

FOUNDATION EQUIPMENT • Rental • Sale • Service BAUER DAWSON PILECO HPSI

IHC KLEMM VULCAN BERMINGHAMMER

Air, Diesel & Vibratory Pile Hammers and Accessories Complete Auger & Tieback System Drills & Accessories

80+ Years Experience

EQUIPMENT CORPORATION OF AMERICA • Pittsburgh • Philadelphia • Washington, DC • Toronto

1-800-PILE-USA www.ecanet.com


Crushing, Screening & Recycling Section National Demolition Association, CSDAForm Alliance The National Demolition nies from the concrete and renovation Association (NDA) and the Concrete industry. Its mission is to promote sawSawing & Drilling Association ing and drilling contractors and their (CSDA) announced a reciprocal assomethods, as well to provide a forum for ciation agreement that will promote the members to share their ideas, needs, exchange of information between the and concerns in a constructive framegroups to enhance the safety and prowork to further enhance concrete sawfessionalism of their industries. ing and drilling technologies. “Because our industries often work The National Demolition closely together, we think a reciprocal Association is a global trade organizaalliance will benefit both groups,” said tion representing the demolition indusMichael R. Taylor, executive director try. At present, the association counts of the National Demolition Patrick O’Brien (L), executive director of the among its members more than 1,100 Association. CSDA, presents a plaque to Raymond Passeno, companies in the United States and “We think it’s natural to encourage a the new president of NDA, to commemorate the Canada, as well as many companies closer working relationship between new reciprocal alliance between the two organi- from around the world. Membership our associations to foster a spirit of zations. includes not only demolition contraccooperation,” added Patrick O’Brien, tors, but also general contractors, civil executive director of the Concrete Sawing Association is an international organization engineering firms, and recycling, landfill of more than 550 contractor, manufacturer, and salvage operations. The association’s & Drilling Association. The Concrete Sawing & Drilling distributor and affiliated member compa- efforts help members stay abreast of envi-

ronmental, regulatory and safety matters, keep regulators informed about issues facing the industry, increase public and industry awareness, and provide members with networking opportunities and information on the latest technical advances in equipment and services. CSDA has been fostering a spirit of cooperation with other associations since 1993 when it was instrumental in creating the International Association of Concrete Drillers and Sawers. IACDS is an umbrella organization of sawing and drilling associations from Australia, Austria, Germany, Italy, Japan, Netherlands, Sweden, Switzerland, United Kingdom and the United States. Other reciprocal members of CSDA include organizations like ASCC, CSDMA, FICAP, SMI and TRMCA. For more information, visit www.demolitionassociation.com.

Major Wire Celebrates 125-Year Anniversary With Seminars Montreal-based Major Wire Industries Ltd. is holding educational customer screening seminars across North America to celebrate its 125th anniversary as a manufacturer and supplier of screen media. Major Wire and its authorized dealer network are jointly conducting free “Screen Maintenance Simplified” seminars to help producers and contractors run their screening operations more efficiently and save on maintenance costs. As of May 1, 2009, more than 35 seminars had taken place involving more than 700 producer personnel from both large and small quarries and sand and gravel operations. Founded in 1884, Major Wire is still an independently owned company that provides screen media solutions for aggregate, recycle, mining, asphalt, coal and green waste producers and contractors throughout North America, Latin America, Europe, Australia and Asia. “Major Wire has been very fortunate over the past 125 years to have great customers worldwide that value our high-performance screen media solutions,” said Jean Leblond, president/CEO and owner of Major Wire

Industries Ltd. and Major Wire Screen Flex-Mat technology with the easy Media Ltd. based near Seattle, Wash. installation of polyurethane and “Our customers take advantage of our rubber panels to eliminate screenextensive expertise to help them be ing problems on flat-surface screen more productive and appreciate our decks, according to the company. strong customer service involving An alternative to traditional both a highly skilled and authorized woven wire, OptimumWire highlocal distributor network, as well as a performance woven wire screen dedicated internal sales support media has proven characteristics of group.” Major Wire Industries is holding educational cus- high strength and resistance to Since Jean Leblond purchased tomer screening seminars across North America to cel- abrasion. It provides up to 40 perMajor Wire in 1990, the company has ebrate its 125th anniversary. cent longer wear life against hard grown from a mostly regional compadrawn high-carbon wire of the ny to an international industry leader. With performance: a non-woven, self-cleaning same diameter. manufacturing and cut and hook facilities screen media that significantly increases Founded in 1884, Major Wire Industries across North America and worldwide, Major material production while greatly reducing Limited designs, manufactures and markets Wire has the resources to provide customers or eliminating blinding, pegging or clogging. screening solutions, including Flex-Mat 3 with short lead times and a product with a This technology has increased screening High-Performance, Self-Cleaning Screen high return on investment, according to the efficiency in more than 15,000 operations Media for traditional and flat-deck screens; worldwide. Its independently vibrating OptimumWire woven tempered and staincompany. Major Wire’s most recent innovations wires, bonded in place with lime green less steel wire cloth; and polyurethane paninclude Flex-Mat 3 for traditional and flat- polyurethane strips, better separate material els for the quarry, mining, recycling, road deck screens and OptimumWire woven wire and increase throughput on screen boxes of building, green waste, top soil and industrial screen media. The company’s most popular all types. Recently, Major Wire also innovat- markets. Major Wire is ISO 9001:2008 reginnovation, Flex-Mat technology, was first ed a Flex-Mat solution for flat-deck istered. pioneered in 1996 to provide the industry polyurethane and rubber screens. It comFor more information, call 450/659-7681 with a significant advancement in screening bines the efficiency and performance of or visit www.majorwire.cc.


Page 30 • November 14, 2009 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Powerscreen Warrior 800 Accepts Variety of Screen Media Powerscreen has launched the new without benching. A new 2-deck screen box Warrior 800 as part of its new product devel- measuring 9 by 4 ft. (2.77 by 1.22 m), opment program. The Warrior 800 is the lat- impressive conveyor discharge heights and a est addition to the Powerscreen range of folding tail conveyor with integral slide out heavy duty screening machines, which facility aids screen media changes. includes the Warrior 1400 and Warrior 1800. Set-up time and ease of operation are Later in 2009, the range will be comple- aided by hydraulic folding tail and side conmented further by the biggest Warrior yet, veyors, rigid feed hopper sides and two the Warrior 2400. speed tracks. A new simple to use electrical “The launch of the Warrior 800 underlines control system allows operators to monitor our commitment to continuous product and diagnose the machine on site via an development and innovation, even in these LCD display without specialist tools. more challenging market conditions,” said The machine will be available in either Pat Brian, Powerscreen global director of tracked or wheeled mobile configurations, sales. “We will continue to invest heavily in with both configurations offering a compact our products so our customers have access to transport footprint with a width of 8.2 ft. (2.5 the very best equipment.” m). The new Warrior 800 has been designed The Warrior 800 was previewed at with the customer in mind. The machine is a NordBau 2009, and will be exhibited at multi-purpose heavy duty incline 2-deck BAUMA 2010. screen, capable of stockpiling, 3-way splitFor more information, visit ting or scalping before and after crushing www.powerscreen.com. units. The screenbox will accept a wide variety of screen media making it a versatile machine, suitable for a variety of applications including topsoil, recycling, C&D waste, sand, gravel and aggregates. The Warrior 800 has been designed to accept material feed size up to 16 in. (40 cm) and handle up to 330 ton (300 t) per hour capacity, depending upon the application. Machine features include a low profile feed hopper with rear door for direct feeding The machine will be available in either tracked or from Powerscreen Pegson wheeled mobile configurations, with both configuXH250 and Powerscreen rations offering a compact transport footprint with Pegson Metrotrak machines a width of 8.2 ft. (2.5 m).

Machine features include a low profile feed hopper with rear door for direct feeding from Powerscreen Pegson XH250 and Powerscreen Pegson Metrotrak machines without benching.

The Warrior 800 is the latest addition to the Powerscreen range of heavy duty screening machines.

The new Warrior 800 is a multi-purpose heavy duty incline 2-deck screen, capable of stockpiling, 3-way splitting or scalping before and after crushing units.

The Warrior 800 has been designed to accept material feed size up to 16 in. (40 cm) and handle up to 330 ton (300 t) per hour capacity, depending upon the application.


Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 14, 2009 • Page 31

SALES • SERVICE • RENTAL • PARTS Whether moving mountains or processing recycled materials, Terex Powerscreen offers the right machine for the job. Designed for stand alone operation or in a complete crushing and screening set-up.

EFFICIENCY + RELIABILITY = PROFIT CALL ON THE EXPERTS. CONTACT YOUR LOCAL TEREX POWERSCREEN DEALER TODAY Serving

Serving

Serving

INDIANA

MINNESOTA

OHIO

Powerscreen of Indiana, Inc. 309 W. Stocker Street Angola, IN 46703

Theco, Inc. 5470 Quam Ave. NE St. Michael, MN 55376

AGGCORP P.O. Box 219 Westerville, OH 43086

(260) 665-5816

(800) 776-0335

(614) 309-6854

www.powerscreenindiana.com

www.thecoinc.com

www.aggcorp.net


Page 32 • November 14, 2009 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

These Grinders Mean Business Swanston Equipment Co. 3450 West Main Fargo, ND 58103 888-792-3192 2009 Tub Grinder

3010T Tub Grinder with Track System

Power up your productivity with the impressive fleet of grinders from DuraTech. All DuraTech grinders feature enclosed engine compartments with self-cleaning rotary screens on the air intake and HPTO microprocessor-controlled clutches. They are equipped with CAT diesel engines ranging from 325hp to 950hp. DuraTech takes on heavy-duty jobs with the highest level of efficiency.

JXT Jaw Crusher Processes Hard, Difficult Materials

The JXT jaw crusher includes a Universal Engineering jaw crusher, Caterpillar C-9 Tier III diesel engine and fully remote controlled movement/operation.

Screen Machine Industries Inc., a manufacturer of portable crushing and screening machinery, has introduced its latest offering in tracked, portable crushing plants. The JXT jaw crusher includes features such as a Universal Engineering jaw crusher, Caterpillar C-9 Tier III diesel engine and fully remote controlled movement/operation. The JXT jaw crusher is a track mounted plant featuring remote controlled blockage clearance and automatic tramp iron relief capabilities. Operated by wireless remote controls, the JXT can process hard and difficult materials, greatly reducing the typical risk of stoppages, damages and high maintenance associated with most other jaw crushers, according to the manufacturer. For more information, call 800/837-3344 or visit www.screenmachine.com.


Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 14, 2009 • Page 33

Mobile Crushing and Screening in Action The unification of the Extec and Fintec brands within the Sandvik group of companies has created the world’s most comprehensive and dynamic line-up of mobile crushing and screening equipment. The Sandvik Mobile Screening and Crushing range now delivers all the familiar characteristics of productivity, versatility and exceptionally low running costs, but they are now combined with levels of durability and aftersales support that are synonymous with the Sandvik name. New name, improved service, same great product.

SANDVIK MOBILE CRUSHERS AND SCREENS

300 TECHNOLOGY CT, SMYRNA

GA 30082

USA

T: +01 (0) 404 589 3820

F: +01 (0) 404 589 3920

info.smc-us@sandvik.com

www.miningandconstruction.sandvik.com


Page 34 • November 14, 2009 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

REMU Screening Buckets Even more productive than big trommels!

‡ )RU PL[LQJ VFUHHQLQJ VHSDUDWLQJ DHUDWLQJ SDGGLQJ HWF ‡ :RUNV ZHOO ZLWK PRLVW DQG GLI¿FXOW PDWHULDOV

Screening Buckets & Amphibious Excavators ZZZ UHPX ¿

7ROO )UHH

(PDLO

XVD#UHPX ¿

Big Float Amphibious Excavators

‡ $PSKLELRXV H[FDYDWRU IRU VKDOORZ DQG PDUVKODQGV ‡ +\GUDXOLF SRQWRRQ VWUXFWXUH FDQ EH QDUURZHG IRU WUDQVSRUWDWLRQ

Get the latest news online.

Visit CEG’s Web Site at www.construction equipmentguide.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 35


Page 36 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mid Country Machinery

3478 5th Av e . S . Fort Dodge, IA 50501 (515) 574-2302

4734 Sergeant Rd. Waterloo, IA 50701 (319) 234-8710

(800) 206-5936 www.midcountrymachinery.com EXCAVATORS

CRAWLER TRACTORS

2007 Kobelco SK-350LC8 EROPS, A/C, Plumbed, 700 Hrs ........ P. O . R . ..........................................................................................P 2006 Kobelco SK-290LC A/C, Very Good Condition, 2,700 Hrs.. ....................................................................................$$105,000 2008 Kobelco SK-260LC8 60ft Long Reach ..............FFOR RENT 2007 Kobelco SK-260LC8 A/C, Plumbed, NEW ................P P. O . R . 2006 Kobelco SK-250LC 60ft. Long Reach, 2,000 Hrs$$145,000 2005 Kobelco SK-250LC A/C, Plumbed, Very Good Cond. ........ ......................................................................................$$85,000 (4) 2008 Kobelco SK-210LC8 Cab, A/C, Aux Hyd, NEW ............ ............................................................................FFrom $125,000 2006 Kobelco SK-210LC A/C, Hyd. Thumb, 2,500 Hrs ..$$85,000 2007 Kobelco SK-170 LC8 Cab, A/C, NEW ......................P P. O . R . 2007 Kobelco SK-160LC 42" Bucket, A/C ......................$$99,000 2005 Kobelco SK-160LC A/C, QC, Hyd. Thumb, 1,600 Hrs ........ ......................................................................................$$65,000 2001 Kobelco SK-160LC A/C, Manual Thumb, One Owner ........ ......................................................................................$$43,000 2009 Kobelco ED195 Blade Runner, A/C, Plumbed, NEWP P. O . R . 2008 Kobelco ED150 Blade Runner, A/C, NEW ..............P P. O . R . 2007 Kobelco ED150 Blade Runner, A/C, NEW ..............P P. O . R . (3) 2007 Kobelco 135SR LC A/C, plumbed, wide pads, short P. O . R . radius, NEW ......................................................................P 2009 Gradall XL4100, 6x4, A/C, NEW ........................$$350,000 2006 JD 180CW Wheel Exc, QC, Ditch Bkt, 1,300 Hrs ..$$89,000 2004 JD 160C LC A/C, plumbed, excellent cond, 1,400 Hrs........ ......................................................................................$$75,000 2006 Cat 330DL A/C, QC, 1,600 Hrs ............................$$190,000 2003 Cat 320CL, Aux. Hyd., One Owner, 5300 Hrs........$$63,000 2000 Cat 318BL, A/C, Good Condition, 4030 Hrs ..........$$51,000 2007 Komatsu PC220LC-8, A/C, 48" Bkt, 1,100 Hrs....$$105,000

2006 Cat D8T EROPS, A/C, New Cat UC, 4 bbl Ripper $440,000 2006 Cat D8T EROPS, A/C, SU Blade, 2,700 Hrs ........$$420,000 2007 Cat D6K XL EROPS, A/C, 6-Way, 900 Hrs ..........$$140,000 (2) 2004 Cat D6R LGP EROPS, A/C, Str. Blade, One Owner........ ..............................................................................$$105,000 ea. 2001 Cat D6R XL, EROPS, A/C, S/U Blade ....................$$95,000 2007 Cat D6R XWIII, EROPS, A/C, 2500 Hrs ..............$$185,000 2003 Cat D6R XW, EROPS, A/C, 6-Way, Sweeps, New U/C........ ....................................................................................$$125,000 2001 Cat D6M LGP, EROPS, A/C, 6-Way ......................$$67,500 1995 Cat D6H XL, EROPS, A/C, S/U Blade ....................$$72,000 2007 Cat D6N LGP, EROPS, A/C, 6-Way, 2,900 Hrs ....$$137,000 2004 Cat D5N XL OROPS, 6-Way blade, exc. Condition, 1,700 Hrs..................................................................................$$93,000 (2) 2003 Cat 973C EROPS, A/C, GP Bucket ............$$95,000 ea. 2006 Cat 963C EROPS, A/C, GP Bucket, 2,900 Hrs ....$ $155,000 2004 Cat 963C EROPS, A/C, GP Bucket, 4,200 Hrs ....$$127,000 2002 Cat 963C EROPS, A/C, GP Bucket, 8,400 Hrs ......$$79,000 1995 Cat 963B EROPS, GP Bucket, good cond, 7,296 Hrs ........ ......................................................................................$$45,000 2006 Cat MT865B, Excellent Condition, 2700 Hrs ......$$165,000 2005 JD 750J LGP EROPS, A/C, 6-Way Blade, 2,100 Hrs .......... ....................................................................................$$107,000 2005 JD 700J XLT, EROPS, A/C, 6-Way Blade ..............$$79,000 2005 JD 700H LGP EROPS, A/C, 6-Way Blade, 3,500 Hrs .......... ......................................................................................$$79,000 2006 JD 650J XLT EROPS, A/C, Laser System, 650 Hrs ............ ....................................................................................$$110,000

LOADER/BACKHOES 2008 NH B110 EROPS, 4WD, E-Hoe, A/C ........................P P. O . R . 2008 NH B95 A/C, Aux Hyd, Pilot Controls, RC, NEW ......P P. O . R . 2007 NH B95 EROPS, A/C, 4WD, E-Hoe, Pilot Con., 168 Hrs .... ......................................................................................$$55,000 2005 JD 310G EROPS, 4WD, Standard Hoe ..................$$38,500 2004 JD 310G EROPS, 4WD, Standard Hoe ..................$$38,500 2001 Cat 416CIT, EROPS, 4WD, E-Hoe ........................$$29,000 FULL LINE OF NEW HOLLAND LOADER BACKHOES AVAILABLE

MINI/MIDI EXCAVATORS 2008 Kobelco 80 CS EROPS, A/C, New ........................$$75,000 2007 Kobelco SK 70 SR Steel or Rubber, EROPS, A/C, 300 Hrs ......................................................................................$$65,000 2007 Kobelco 50SR-3 EROPS, A/C, Aux Hyd, Rubber Tracks, P. O . R . NEW ..................................................................................P 2007 Kobelco 35SR3 (1) OROPS, (1) EROPS, NEW ........P P. O . R . 2008 Kobelco 17SR OROPS, Expandable Tracks, NEW....P P. O . R . 2003 Bobcat 325D OROPS, Rubber Tracks, 1900 Hrs ..$$15,000 Hitachi ZX70 EROPS, Steel Tracks ................................$$35,000

WHEEL LOADERS 2006 Cat 950H EROPS, A/C, 1,700 Hrs ......................$$159,000 2003 Cat 950G EROPS, A/C, RC, 4,500 Hrs ..................$$99,000 2006 Cat 938G EROPS, A/C, RC, 1,000 Hrs ..................$$99,000 2006 Cat 938G EROPS, A/C, RC, 2,000 Hrs ..................$$87,500 2006 Cat 930G EROPS, A/C, QC, 2,800 Hrs ..................$$85,000 (2) 2006 Cat 928GZ EROPS, A/C, QC, LOW Hrs......$$82,500 ea. 2001 Cat 902 EROPS, QC, 2,200 Hrs ............................$$37,500 2001 Volvo L220E EROPS, A/C, 7yd Bkt, Radio, RC, 12,971 Hrs ....................................................................................$$130,000 1998 Volvo L180C EROPS, A/C, RC, 17,000 Hrs ..........$$67,000 2007 NH W190 EROPS, A/C, 4.25 yd GP Bkt, 900 Hrs $145,000 2006 JD 644J, EROPS, A/C, RC ....................................$$82,000 2005 JD 544J, EROPS, A/C, QC, 1,800 Hrs ..................$$87,000 1989 JD 444E, EROPS, GP Bkt......................................$$21,500 2003 Komatsu WA180-3RT, EROPS, GP Bkt, 4,813 Hrs$$57,500 2005 Hyundai HL740-7, EROPS, A/C, 2,100 Hrs ..........$$55,000 1975 Case W20, EROPS, GP Bkt ..................................$$12,000 Michigan 175B, OROPS, GP Bkt......................................$$7,500

COMPACTORS 2007 IR SD122F 84" Padfoot w/Blade............................$$95,000 2003 IR SD100F 84" Padfoot, 609 Hrs ..........................$$75,000 2005 IR SD100D-TF 84" Smooth Drum, 500 Hrs ..........$$75,000 2006 IR SD77DX 66" Smooth Drum, 500 Hrs................$$59,000 2003 IR SD77F 66" Padfoot w/Blade..............................$$42,000 2004 IR SD70D, 66” Smooth Drum, 830 Hrs ................$$49,500 2005 IR SD70D OROPS, 66" Smooth Drum, 787 Hrs ....$$55,000

2003 IR SD70D OROPS, 66" Smooth Drum, 1,300 Hrs $38,000 1999 IR SD70F OROPS, 66" Padfoot, 2,500 Hrs............$$40,000 2004 Bomag BW177AD 66" Smooth Drum w/Shell Kit, OROPS, 1,300 Hrs........................................................................$$45,000 2004 Bomag BW177PDH OROPS, 66" Padfoot, 1,400 Hrs ........ ......................................................................................$$48,000 Ingersoll Rand DD12 32" Double Drum Roller, 321 Hrs $13,000 (2) 2002 Vibromax 605D OROPS, 66" Padfoot, 1,800 Hrs.......... ......................................................................................$$37,000 2007 Dynapac CA150D 66" Smooth Drum, 30 Hrs........$$59,000

FORKLIFTS (10) 06-09 SkyTrak 10054, EROPS, 10,000#, 54Ft. Tilt Carriage Start at $71,000 ..........................................................................S (12) 06-09 SkyTrak 8042, EROPS, 8000#, 42Ft, Tilt Carriage .... Start at $49,000 ..........................................................................S (9) 05-09 SkyTrak 6042, EROPS/OROPS, 6000#, 42Ft, Tilt Car Start at $31,000 ..........................................................................S 2007 SkyTrak 6036, EROPS w/Heat, 6000#, 36Ft, Tilt Car, 700 Hrs ................................................................................$$52,000 2005 SkyTrak 6036, OROPS, 6000#, 36Ft, 1900 Hrs....$$31,000 2004 SkyTrak 6036, OROPS, 6000#, 36Ft, 2500 Hrs....$$34,000 2008 JLG G12-55A, OROPS, 12,000#, 55Ft, 143 Hrs ......P P. O . R . 2007 JLG G9-43A, EROPS, Sidetilt, 9000Lb, 43Ft, 1000 Hrs .... P. O . R . ........................................................................................P 2004 JLG G9-43A, OROPS, 9000#, 43Ft, 1500 Hrs ......$$44,000 2007 JLG G6-42A, EROPS, Sidetilt, 6600Lb, 42Ft, 1000 Hrs .... P. O . R . ........................................................................................P 2007 JLG G5-19A, EROPS, 5000Lb, 19Ft, 1300 Hrs ......P P. O . R . 2006 Gehl RS5, 6000#, 35Ft, 400 Hrs ..........................$$35,000 2006 Gehl RS6, OROPS, 6000#, 36Ft, 1900 Hrs ..........$$28,000 2005 Gehl RS6, 6000Lb, 36Ft, 1100 Hrs ......................$$38,000 2005 Mustang 634, 6000Lb, 34Ft, 541 Hrs ..................$$45,000 1998 Carelift 6044, 6000Lb, 44Ft, 3315 Hrs ................$$23,000 1998 Traverse 6035, 6000Lb, 35Ft, 600 Hrs ................$$25,000 2007 Lull 1044C-54, OROPS, 10,000#, 54Ft, 1100 Hrs$$72,000 1999 Lull 1044C-54, OROPS, 10,000#, 54Ft, 900 Hrs..$$32,000 1998 Lull 644B-37, 6000Lb, 37Ft, 4150 Hrs ................$$28,000 FULL LINE OF NEW SKY TRAK & JLG FORKLIFTS AND MANLIFTS

GRADER/SCRAPERS/TRUCKS 2004 Cat 140H EROPS, A/C, Push Block, Rear Rip. ....$$145,000 2006 Cat 613C II EROPS, A/C, Exc. Condition, 1,500 Hrs .......... ....................................................................................$$150,000 (2) Cat 631B Hydraulic Pull Scraper ........................$$30,000 ea. Terex TS-14B EROPS, A/C ............................................$$25,000 2006 E-Ject E-22, 22Yd. Hyd. Pull Scraper ..................$$75,000 (2) 2005 Cat 725, Matched Pair, Excellent Condition, 2500 Hrs ..............................................................................$$225,000 Ea. 2002 Cat 725, Articulated Dump Truck, 23.5x25 Tires, 5500 Hrs................................................................................$$152,000 (2) 2008 Volvo A25D, 25 Ton Articulated Trucks, Like New........ ..............................................................................$$225,000 Ea. *OTHER MISCELLANEOUS EQUIPMENT, PARTS AND ATTACHMENTS NOT LISTED CALL IF YOU DON'T SEE SOMETHING YOU'RE LOOKING FOR


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 37

Whatever the Work

WEST SIDE (877) 355-3968

1999 Dynapac CC122, Stk 1693 ................$10,100

2004 Dynapac CC122, Stk 1694 ................$14,500

2006 Dynapac CC122, Stk 1657 ................$18,950

2001 Dynapac CC142, Stk 1651 ................$19,800

2002 Dynapac CC142, Stk 1695 ................$20,900

2006 Dynapac CC142, Stk 1658 ................$24,600

1997 LeeBoy 1000B, Stk 9L05195 ...... 2006 LeeBoy 1000F, Stk 1696 ............ 2007 Bomag 3313, Stk 2B05202 ........ 2008 Bomag 814-2, Stk 2B04280 .......... ..............................................$11,900 ..............................................$24,500 ..............................................$54,500 ..................................................$85,000

For High Performance Used Equipment, Count on West Side Tractor Sales!

www.westsidetractorsales.com

Whatever the Work

WEST SIDE (877) 355-3968


Page 38 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • November 14, 2009 • Page 39

Entertainment, Education Highlight Link-Belt’s CraneFest in Lexington

Spring Into Action

CRANEFEST from page 20

safety of its cranes. Following a tour of their manufacturing plant, a live demonstration and product introduction was followed by some one-on-one hands-on time for those attending the event.

(L-R): Link-Belt’s Troy Krumm gives Bob Warianka and Fred Hamby of Crane Service, Inc., based in Albuquerque, N.M., some tips on operating the 348 Hylab lattice crawler crane.

(L-R): In from New York, Russell Williams of Rig-All is joined by William Boulter of Boulter Rigging and Greg George of Woods CRW to take in the latest in crane technologies.

35 Years Link-Belt’s core production base and center for worldwide operations is its 682,000 sq. ft. manufacturing facility in Lexington, Ky. With major expansion plans over the past 10 years along with continuous improvement philosophies, this facility has emerged as the most modern crane facility in North America. Management With more than 100 years cumulative crane experience, Link-Belt’s seasoned management team is headed up by Chuck Martz. The top management team includes: • Chuck Martz, CEO and president • Jim Forshee, vice president — manufacturing • Melvin Porter, CFO and vice president of finance • Bill Stramer, vice president — marketing, sales and customer support • Bruce White, vice president of engineering

Come to Whayne for Quality and Affordable Used Parts

800-4WHAYNE 800-494-2963 www.whayne.com

see CRANEFEST page 44

AUTHORIZED OEM DEALER Jeff Noland (L) of General Steel Crane & Rigging gets some last minute pointers from Link-Belt’s Dan Harrington before trying his hand at this HTC 8690.

Hitachi Excavators Hitachi Trucks Kawasaki Gehl Euclid Talbert Protec Waldon Perkins Hensley

YOUR PARTS SOURCE

Bucyrus Blades Cummins Baldwin Filters Expander Systems Allied/Rammer Esco Isuzu Hino Sennebogen Moxy

Dresser (new & non-OEM) Galion (new & non-OEM) Wabco Michigan Samsung IH Cat (non-OEM) Remanufactured Components ...plus many others

Visit our website: www.howelltractor.com 811 Sivert Dr. Wood Dale, IL 60191 800-866-1778 Fax: 630-595-3855

(L-R): Joe Everett of Superior Cranes Inc., Steve Berry of Crowder Construction, Kyle Belkoski of Superior Cranes and Patrick Leatherwood of Pinnacle catch up at the Link-Belt CraneFest.

480 Blain Street Gary, IN 46406 800-852-8816 Fax: 219-977-4220

2770 May Road Peru, Ill 61354 800-342-6072 Fax: 815-224-2538


Page 40 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GREAT HOLIDAY GIFTS! Allis Chalmers HD-41 Crawler Dozer, 1:25 Scale..................................................$190

Caterpillar "O" Gauge Complete Train Set ...... ..................................................................$275

Northwest 25-D Shovel, 1:50 Scale .......... ..........................................................$100

tmas Chris st a is Ju way! hA Mont

Bobcat Tractor/Trailer Set, 1:50 Scale ............................................................$80

All New in Box Allis-Chalmers HD41 Crawler Dozer, 1:25 Scale ............................................................$190 Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ................................................................$80 Bell B40D Articulated Truck, 1:50 Scale ............................................................................$50 Bobcat A300 Wheel Loader, 1:25 Scale ............................................................................$55 Bobcat S175 Skid Steer Loader, 1:50 Scale ......................................................................$18 Bobcat Tractor/Trailer Set, 1:50 Scale................................................................................$80 Case 721D Wheel Loader, 1:87 Scale ..............................................................................$20 Case 340 Articulated Truck, 1:87 Scale..............................................................................$20 Case CX 330 Excavator, 1:87 Scale ....................................................................................$20 Caterpillar No. 12 Motor Grader, 1:87 Scale ....................................................................$25 Caterpillar 140H Motor Grader w/ripper & scarifier, 1:50 Scale ......................................$40 Caterpillar CS-563 Soil Compactor, 1:87 Scale ................................................................$25 Caterpillar 825 Soil Compactor, 1:50 Scale ......................................................................$35 Caterpillar 420E Backhoe/Loader, 1:50 Scale....................................................................$45 Caterpillar D6K XL Track Type Tractor, 1:50 Scale ............................................................$45 Caterpillar D10T Track Type Tractor, 1:50 Scale ................................................................$75 Caterpillar D11R Track Type Tractor, 1:50 Scale................................................................$45 Caterpillar D11T Track Type Tractor, 1:50 Scale ................................................................$70 Caterpillar 336D L Excavator, 1:50 Scale ..........................................................................$70 Caterpillar 797F Off-Highway Truck, 1:50 Scale ..............................................................$250 Caterpillar 950H Wheel Loader, 1:50 Scale ......................................................................$45 Caterpillar 980G Wheel Loader, 1:50 Scale ......................................................................$35 Caterpillar 992 Wheel Loader, 1:50 Scale ........................................................................$50 Caterpillar 994F Wheel Loader, 1:50 Scale ......................................................................$95 Caterpillar 226B2 Skid Steer Loader w/tools, 1:32 Scale ................................................$30 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale ..................................................$40 Caterpillar D5G XL Track Type Tractor, 1:50 Scale ............................................................$55 Caterpillar D8R Track Type Tractor, 1:50 Scale..................................................................$40 Caterpillar Vintage Twenty Tractor w/metal tracks, 1:16 Scale ........................................$70 Caterpillar 302.5 Mini-Excavator, 1:32 Scale ....................................................................$30 Caterpillar 320C Excavator, 1:50 Scale ..............................................................................$35 Caterpillar 330D L Excavator, 1:50 Scale ..........................................................................$70 Caterpillar 511 OB Excavator, 1:50 Scale ..........................................................................$65 Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale ..........................................................$30 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale ..................................................$40 Caterpillar 365C L Front Shovel, 1:50 w/metal tracks ..........................................................$70 Caterpillar 963D Track Loader, 1:50 Scale ........................................................................$45 Caterpillar 977 Traxcavator, 1:50 Scale ............................................................................$35 Caterpillar 611 Motor Scraper in display case, 1:64 Scale ..............................................$25 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale ......................................................$45 Caterpillar 725D Articulated Truck, 1:50 Scale..................................................................$30 Caterpillar 775E Off-Highway Truck in display case, 1:64 Scale ......................................$25 Caterpillar 777D Off-Highway Truck, 1:50 Scale................................................................$40 Caterpillar "O" Gauge Complete Train Set ..........................................................................$275 Caterpillar Agricultural 75E Tractor, 1:64 Scale ................................................................$12 Caterpillar Four Piece Military Set, 1:50 Scale ................................................................$75

Hitachi LX70 Wheel Loader, 1:40 Scale ............................................................................$65 International 433 Motor Scraper, 1:25 Scale ..................................................................$175 International 560 Payloader, 1:25 Scale ..........................................................................$175 International Harvester 560 PayLoader, 1:87 Scale ..........................................................$35 International TD-24 Military Dozer, 1:50 Scale..................................................................$50 JCB 3CX Backhoe Loader, 1:50 Scale ................................................................................$50 JCB JS220 Excavator, 1:50 Scale ......................................................................................$45 JCB 456 Loader Waste Master, 1:50 Scale ........................................................................$60 JCB 456 ZX Wheel Loader, 1:50 Scale ..............................................................................$65 JCB Vibromax VM 115 Soil Compactor, 1:50 Scale ..........................................................$45 John Deere 320 Skid Steer Loader, 1:16 Scale ................................................................$45 John Deere 850J Dozer, 1:50 Scale....................................................................................$40 Komatsu 960E Mining Truck, 1:50 Scale..........................................................................$275 Komatsu PC300LC-8 Excavator, 1:50 Scale ......................................................................$70 Komatsu WA500-6 Wheel Loader, 1:50 Scale ..................................................................$60 Komatsu D51 EX Dozer, 1:50 Scale ....................................................................................$60 Komatsu D51 PX Dozer, 1:50 Scale....................................................................................$55 Komatsu D375 Dozer, 1:50 Scale ......................................................................................$75 Komatsu GD655 Motor Grader, 1:50 Scale ........................................................................$60 Komatsu WB146 Backhoe Loader w/tools, 1:50 Scale ......................................................$45 Liebherr 580 Wheel Loader, 1:87 Scale ............................................................................$25 Link-Belt 210 X2 Excavator, 1:40 Scale..............................................................................$65 Mitsubishi FG25N Forklift, 1:25 Scale................................................................................$25 Northwest 25-D Shovel, 1:50 Scale..................................................................................$100 Peterbilt Tractor/Trailer w/Caterpillar D8R, 1:50 Scale ..................................................$100 Peterbilt Blue/Silver 367 Dump Truck, 1:34 Scale ............................................................$85 U.S. Army Ford F800 Tractor w/Trailer, 1:50 Scale ..........................................................$35 Volvo G970 Motor Grader, 1:50 Scale ................................................................................$65 Volvo SD-122 Soil Compactor, 1:72 Scale ........................................................................$45 Volvo A25C Articulated Truck, 1:50 Scale ..........................................................................$30 Volvo A25D Articulated Truck, 1:50 Scale ..........................................................................$45 Volvo A40D Articulated Hauler, 1:50 Scale ........................................................................$50 Volvo BL71 Backhoe Loader, 1:50 Scale ............................................................................$45 Volvo EC45 Mini-Excavator, 1:50 Scale..............................................................................$35 Volvo EC 210 Excavator, 1:50 Scale ..................................................................................$45 Volvo EC210C Excavator, 1:50 Scale ..................................................................................$80 Volvo EC240B Excavator, 1:50 Scale ..................................................................................$45 Volvo EC280 Excavator, 1:50 Scale ....................................................................................$25 Volvo EC700 Excavator, 1:50 Scale ....................................................................................$80 Volvo FH12 Tractor/Trailer w/Volvo L150C, 1:50 Scale ....................................................$60 Volvo L90E Wheel Loader, 1:50 Scale ..............................................................................$65 Volvo L60E Wheel Loader w/Attachments, 1:50 Scale ......................................................$65 Volvo 150E Wheel Loader, 1:50 Scale ..............................................................................$45 Volvo L35B Wheel Loader, 1:50 Scale ..............................................................................$45 Volvo L350F Wheel Loader, 1:50 Scale ............................................................................$80

Collections Wanted, I Buy Collections

Shipping and Handling Additional

CEG Scale Models

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 41

Mustang equipment is a consistent workhorse. Put the performance and versatility of Mustang to work for you. For information on Mustang’s complete line of compact equipment, see your nearest Mustang dealer or visit mustangmfg.com.

STAR EQUIPMENT LTD.

TOP NOTCH EQUIPMENT

1401 2ND AVENUE DES MOINES, IA 50314 (515) 283-2215 FAX: (515) 283-0295 (800) 369-2215

5505 N. HWY. 169 PLYMOUTH, MN 55442 (888) 824-6559 www.topnotchequipment.com

mustangmfg.com

2625 W. AIRLINE HWY. WATERLOO, IA 50703 (319) 236-6830 FAX: (319) 236-6834 (800) 791-9249

2950 6TH STREET SW CEDAR RAPIDS, IA 52404 (319) 365-5139 FAX: (319) 365-6726 (800) 728-5139 2100 E. LINCOLN WAY AMES, IA 50010 (515) 233-9500 FAX: (515) 233-9505 (866) 856-2312


Page 42 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Municipalities Team Up for Bishop Ford Freeway Rehab BISHOP from page 1

under way quickly, with crews starting work on May 11. Holy Highway Work, Batman! Formerly known as the Calumet Expressway, the Bishop Ford Freeway is named after Chicago religious activist Bishop Louis Henry Ford, who preached in Chicago for 40 years and presided over the Church of God in Christ. He died in 1995. The southside roadway is a portion of Interstate 94 that runs from Interstate 57 south to the intersection with Interstates 80 and 294 (the Tri-State Tollway) and Illinois Route 394. It turns into the Dan Ryan Expressway to the north and the Kingery Expressway to the east of the Tri-State Tollway. The Bishop Ford is the only toll-free freeway-grade road in the greater Chicago area with the designation of freeway. All the others – Dan Ryan, Kennedy, Edens, Stevenson, Eisenhower, Elgin-O’Hare, Kingery and Borman – are called expressways, a Chicago colloquialism. As the main link between Chicago and northwest Indiana, it sees heavy traffic, the majority of which, according to IDOT’s Marisa Kollias, is truck traffic. Originally constructed in 1962, the Bishop Ford is one of many aging roadways in need of refurbishment. On the Surface Twenty years ago when Myszkowski first worked on the Bishop Ford, the asphalt mix was very different. It would “rut heavily under stress from truck traffic,” he said.

Today, the stone matrix asphalt mix used on the project is designed to last longer, with no ruts. The new mix doesn’t separate. Therefore, there are no “pockets” in the new surface that lead to pot holes and ruts. Another improvement is the material’s skid resistance. “We’ve been using it on the expressways for about 10 years. It performs very well.” One ironic twist in using the new mix, however, is that takes longer to apply. Although pavers used to go 40 to 50 ft. (12 to 15 m) per minute, crews on the Bishop Ford are going 20 ft. (6 m) per minute. “You can’t go as fast with this mix,” Myszkowski explained. “Quality comes first.” The slower speed doesn’t mean work takes twice as long, though. Transfer devices — shuttle buggies — are used to haul the mix from the plant and dump it into the pavers. Because the pavers are moving more slowly, the shuttle buggies are able to keep up with them so they never have to stop. In addition to the typical pavers and rollers on a road construction job, the Bishop Ford project requires a three-wheel roller. The older model was brought back, Myszkowski said, because the new asphalt mix demands static rolling rather than vibrating. The older roller’s 85-in. (215 cm) deck helps speed the process. Approximately 90,000 tons (81,650 t) of the asphalt mix will be used on the 9-mi. roadway, with a different mix being concocted for the shoulders. Myszkowski explains that one 3-mi. (4.8 km) section south of the steel bridge at 142nd Street will get a 4-in. (10 cm) base, while the rest of the freeway will get a 2-in. (5 cm) base. Because that 3-mi. stretch is more deteriorated, he said crews had to strip all the old asphalt off down to the concrete. On the rest, crews are milling off 2 in. before repaving.

Scheduled Closings When you remove asphalt, Myszkowski continues, you have to do it twice. “You can only take off two inches at a time because you don’t want too much difference between lanes. It’s a safety issue.” That’s why crews are doing all asphalt work at night. The road is open to traffic during the day, although some lanes remain closed during the day for center median construction and guardrails replacement. Bridge work also is being done in “staged construction,” while one lane is One of nearly 250 “shovel-ready” con- closed. struction projects in Illinois, the $27.5 It’s a unique project, according to million job, funded by President Myszkowski, because of the schedule, Obama’s American Recovery and which calls for nighttime and weekend lane Reinvestment Act, is a joint venture closures, with some single-lane configuraheaded by Chicago area-based tions, since much of the work will be done in Gallagher Asphalt and K-Five Construction. Let in April, work got the overnight hours. He explains the reason: under way quickly, with crews starting “We can’t put [three lanes of traffic] into one lane until late at night.” However, crews work on May 11.

The current rehabilitation project involves resurfacing all lanes and shoulders of the 9-mi. (14.5 km) stretch of freeway between Martin Luther King Drive and 159th Street, as well as pavement patching, bridge repairs, new guardrail installation and exit/entrance ramp resurfacing — including the Stony Island Feeder Ramp.

have to be completely off by 5 a.m. A 90minute tear-down shortens the nighttime working hours. During weekday rush hours, they’re trying to maintain three lanes of traffic in each direction. However, Myszkowski said they are allowed to close one lane. And, in fact, in some sections, traffic has been reduced to two lanes for months. Traffic along the Stony Island feeder ramp has been reduced to one lane in each direction intermittently, as have exit and entrance ramps at 111th, 115th, 130th, 147th and 159th streets, although ramps are not being closed concurrently. The DOT has alerted travelers that longterm lane closures are necessary to complete bridge, patching and median work at various locations and times and to expect delays or seek alternate routes and public transportation. All closures are weather-dependent, as is the schedule. Myszkowski explained that if it’s raining at 8 p.m., they aren’t allowed to put up lane closures for the entire night. “It’s a safety issue. We don’t take chances on an expressway.” Weather also affects delivery of the asphalt mix, which requires a two-hour curing period at the plant. Approximately 400 tons (362 t) is mixed in each batch and sits in a silo, curing, for two hours before being hauled to the work site. It is replenished as paving progresses. But short hours on night jobs force Myszkowski to play weatherman. “We fight the battle: do we make the mix? We hate to make it if we have to cancel a pour because of weather. That hurts our budget.” Weather permitting, the majority of the

work this time around is expected to be completed in the fall of 2009. A mostly dry summer has helped keep them on schedule, so Myszkowski anticipates finishing on time. Additional nighttime lane closures will be necessary in the spring of 2010 to complete the project. Continued Cooperation Lane closures have increased congestion on this heavily traveled stretch of road. Kollias said the DOT has worked exhaustively to get the word out to impacted municipalities (Chicago, South Holland, Calumet City and Dolton) and travelers through message boards, press releases and various news outlets, issuing updates on traffic changes as work progresses. “They’ve done a great job getting the word out,” Myszkowski said. “There’s been a positive response. People are aware of the work and taking alternate routes.” Even crewmembers have been forced to find alternate routes. More than 100 workers are onsite during the two shifts. Myszkowski said he looked for side routes to get asphalt in quickly. He said it’s worked out well — the best he’s seen it of all the times he’s worked on the Bishop Ford. He expects this to be his last time resurfacing the freeway, noting that the 10-year design of the new matrix should last until he retires. “If you can get 10 years out of a bituminous job with the kind of weather and traffic we have up here, it’s outstanding.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 43

INSIST on Quality

The Victor L. Phillips Company 4100 Gardner Ave. Kansas City, MO 64120 816/241-9290 Joplin, MO 417/781-8222 Brookline Station, MO 417/887-2729

Wichita, KS 316/838-3346 Topeka, KS 785/267-4345 Garden City, KS 620/275-1996

doosanportablepower.com © 2009 Doosan Infracore International, Inc.

McAllister Equipment Co. 150 E. North Avenue Villa Park, IL 60181 630/530-7600 630/530-1901 Alsip/Chicago 708/389-7700 E. Peoria 309/694-4455

Ingleside 815/344-0880 Rockford 815/227-0555 Springfield 217/789-0351


Page 44 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Now you can choose the rightsized machine to fit those mid-size grader projects!

BRIDGE THAT GAP

Get the agility, economy and transportability of a Champion compact grader. And get a full 23,500 lbs. of hard-working power and torque to move big loads efficiently. That’s what you call a machine built to produce. And that’s what we call the Production Class C110 Grader: the new heavyweight Champion!

< 15,000 lbs.

C110

> 30,000 lbs.

Call your Champion dealer for details or go online for the latest updates on “The Main Event” demo tour in your area.

www.championmotorgraders.us Tel: 704.392.1038 Fax: 704.394.0802 Big ideas at work in small graders!

Distributors Descend on Lexington for Link-Belt’s CraneFest CRANEFEST from page 39

Operations Since 1994, Link-Belt has invested massive human resource hours in university coursework and in-house training, in addition to millions of dollars of capital improvements to make the transition to a company-wide “lean manufacturing” philosophy. The operating principles of QCD (quality, cost, delivery) and safety were implemented and are adhered to in every aspect of all processes. Link-Belt’s production system is modeled after Toyota’s lean production system that is part of the

advanced course curriculum at the University of Kentucky’s Center for Robotics and Industry. The Link-Belt Construction Equipment Company is a leader in the design, manufacture and sales of telescopic and lattice boom cranes, with headquarters in Lexington, Ky. In the recent decade, a dynamic and highlyfocused Link-Belt has emerged as a market leader in crane design and product quality standards by focusing on continuous improvement and employee empowerment. For more information, visit www.linkbelt.com.

(L-R): Link-Belt President and CEO Chuck Martz visits with Brad Churchill of U.S. Erectors Inc., Steve Smith of Rexco Equipment Co. and Sean Huckleberry of Heartland Crane Services.

(L-R): Bruce Bayless of Dawes Rigging & Crane Rental is joined by Steve Swanson of Modern Crane Service, and Steve Challoner of Dawes.

(L-R): Dustin and Don Hyre of Senco, Scott West of Rudd Equipment, and Steve Neeley of Senco take a close look at this HTC-3140.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 45

These workmates putHigher more work within reach. Faster cycles. productivity Name the job and there’s a 310SJ or 410J Backhoe Loader to help you get Don’t be fooled by imitators. Thirty-plus it done. You’ll benefit from uptimeyears’ experience building best enhancing features such asthe advanced hydrostatic dozers makes John diagnostic monitors, solid-state Deere the brandand for you. Innovations,cooling like Total electronics, an improved Machine Control (TMC), allow operators system. Other advantages include to customize machine response ground-level service points, low and operation to their personal maintenance costs, smoothpreferences. and J-Serieshydraulics, Dozers deliver unsurpassed responsive and best-in-class productivity and uptime, along with the resale value. Go for the Total Machine lowest possible costs. Control (TMC) anddaily tooloperating carrier options And that’s just for starters. and take on even more work. To put 310SJ or 410J Toalearn all about JohnBackhoe Deere J-Series Loader to work Dozers, give for us ayou, call. give us a call.

Contact us soon. Contact www.johndeere.com

HOLT EQUIPMENT CO. Louisville, KY 40223 502/253-3721 1-800/507-9705 London, KY 606/862-8447 1-877/231-7151 Bowling Green, KY 42101 270/842-3400 1-866/528-9699 Richmond, KY 859/623-2030 1-800/463-8722

KS1CUFF0012N -00218353

Indianapolis, IN 46219 317/544-3411 1-800/876-4690 Lafayette, IN 47905 765/447-6933 1-800/937-3355 Bloomington, IN 47403 812/333-9677 1-800/888-9677 South Bend, IN 46619 574/232-1461 1-877/248-1713 Fort Wayne, IN 46825 260/482-8576 1-877/845-5764

JDE EQUIPMENT 651 AIS Drive S.W. Grand Rapids, MI 49548 616/530-2000 1-800/664-3303 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248/437-8121 1-800/457-8121 Traverse City 777 US 31S Traverse City, MI 49684 231/943-3996 1-800/968-1110

WEST SIDE TRACTOR SALES CO. Naperville, IL 60563 630/355-7150 Fax: 630/355-7173 South Holland, IL 60473 708/331-6362 Fax: 708/331-7334 Rockdale, IL 60436 815/730-9011 Fax: 815/730-9036

Rockford, IL 60012 815/961-3160 Fax: 815/965-1810 Wauconda, IL 60084 847/526-7700 Fax: 847/526-3565


Page 46 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

100%

LC

(the LOGICAL CHOICE for your next excavator)

Komatsu excavators have set the standards for productivity, operator comfort and reliability over the years. And, with the introduction of our mid-sized –8 series, the standards have been raised yet again. • Tier-3 engines deliver reduced emissions without sacrificing power or productivity. • Electronics, engine and hydraulics are optimized for maximum efficiency and minimum fuel consumption (10% reduction compared to –7 models). • Multi-function LCD monitor provides critical operating information at a glance (and it can do this in 10 languages). From enhanced safety features to extended maintenance intervals, the PC200LC-8, PC220LC-8 and PC270LC-8 show what happens when the best engineers put the latest technology to work. The results are always…

100% Komatsu.

866.513.5778

www.komatsuamerica.com

COLUMBUS EQUIPMENT COMPANY

ROAD MACHINERY & SUPPLIES COMPANY

www.columbusequipment.com

www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8671 800/888-9535 Grand Rapids MN 218/328-5916 800/459-5916

65 East Kingston Ave. Columbus, OH 43207 614/443-6541 614/443-9673 Fax Toledo, OH 419/872-7101 Cincinnati, OH 513/771-3922

Richfield, OH 330/659-6681 Cadiz, OH 740/942-8871 Dayton, OH 937/879-3154

Canton, OH 330/453-4521 Painesville, OH 440/352-0452 Jackson, OH 740/288-0222

Virginia MN 218/741-9011 800/752-4304 Des Moines IA 218/741-9011 800/555-1445 Sioux City IA 712/252-0538 800/633-9104

Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 W Main Ave Fargo ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND 58072 800/825-0479

2300 Vermont Avenue Bismarck ND 58504 800/279-4437


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 47

AIS CONSTRUCTION EQUIPMENT CORP. www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 Fax: 517/321-4191 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586/727-7502 Fax: 586/727-7311 Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231/267-5060 Fax: 231/267-5257

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax South Bend, IN 574/233-8770 574/233-8775 Fax

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 800/252-2926 Bolingbrook, IL 630/739-7474 800/826-9608 Carterville, IL 618/985-3399 800/274-7202 Marengo, IL 815/923-4966 800/765-2635 Portage, IN 219/764-8080 888/764-8226 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 800/274-7230 Cape Girardeau, MO 573/334-5252 800/274-7210 Columbia, MO 573/814-0083 800/274-7212 Palmyra, MO 573/769-2056 800/274-7214 600 Liberty Street, Green Bay, WI 54304 920/435-6676 920/435-5454 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville WI 262/835-2710 262/835-2844 Fax Wausau, WI 715/355-9898 715/241-0044 Fax

IT TAKES GROUNDBREAKING TECHNOLOGY TO BE THE BEST AT GROUNDBREAKING.

Alex Power Equipment 111 50th Ave. W. Alexandria, MN 56308

The New Kubota KX71-3 Compact Excavator Breakout force: 3,285 lbs. (arm) 6,350 lbs. (bucket) The most in its class 27.5 HP Kubota diesel engine Variable displacement pumps 18" tailswing overhang Large operator space Digital diagnostics Double-opening bonnet

320/763-4994 Fax 320/763-5428

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100

www.kubota.com EVERYTHING YOU VALUE

Terex Welcomes D-P Equipment Co. as New Compact Equipment Distributor D-P Equipment Co. Inc., with branches in Camden, Mich., and Montpelier, Ohio, now distributes the full line of Terex compact construction equipment. The Terex line includes compact track loaders, compact excavators, compact wheel loaders, site dumpers, tractor loader backhoes, light towers, telehandlers, power buggies, compaction rollers and a tracked utility vehicle. Founded in 1968, D-P Equipment offers new and used equipment, parts and service for lawn and garden through heavy industrial equipment customers. “We are excited to welcome D-P Equipment to our expanding distribution network of Terex compact equipment distributors in North America,” said Del Carver, area director, North America Compact Equipment. “With their broad reach in Michigan and Ohio, we see great opportunity for D-P Equipment to introduce new customers to the Terex compact equipment product line.” With more than 45 unique product models, the Terex compact equipment line offers a wide range of compact equipment, giving contractors numerous options for their equipment investment. Bob Galloway of D-P Equipment said, “Carrying the Terex line of compact equipment at D-P Equipment opens up new opportunities for our company to expand its customer base. With the full range of products in our inventory and focus on service after the sale, we are now able to better serve the diversified needs of our customers.”

D-P Equipment also offers financing options for its Terex compact equipment line through Terex Financial Services. Terex Financial Services offers a wide range of effective finance and leasing solutions, structured to complement customers’cash flow and budgets. The Terex Financial Services team assists in all areas of asset management, from the analysis of future equipment values through the disposal of used equipment. For more information, visit www.dpequipment.com.

D-P Equipment Co. now distributes the full line of Terex compact construction equipment.


Page 48 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Friends, Colleagues Mourn Death of Tim Atchley, 53

The Victor L. Phillips Co. 4100 Gardner Ave. Kansas City, MO 64120 816/241-9290 816/241-1738

Friends and colleagues are telling stories Greg Clinton, another Tramac employee, about Tim Atchley, a long-time employee of recalled the two sides of Mr. Atchley: the Tramac. weekend side when he and his wife would And whether they’re talking about his jump on their motorcycles, and the weekday encyclopedia-like product knowledge or his side totally dedicated to helping customers. need for speed, they are all smiling as they “I remember he would tell me on Monday remember. mornings about his weekend travels. He Mr. Atchley died in Indianapolis, Ind., on rarely used a map. They would just get on Sept. 1 at the age of 53, following a coura- and ride,” said Clinton. “Professionally, Tim geous battle with cancer, but it was his mix was incredible. Calls were always returned, of professional leadership and personal friendliness that are being fondly recalled and honored. He was employed in the heavy construction equipment industry all of his life, from his earliest mechanic training in Nashville, Tenn., where he worked as a welder to pay for his schooling. He eventually went to work for a heavy equipment dealer in southern Indiana as a field service technician, then later with other road equipment manufacturers in various customer service positions. Most recently, Mr. Atchley was with Tramac/DII Attachments, a division of Doosan Infracore International, as a product support manager helping dealers throughout the country. “Throughout his sickness, Tim Atchley lost his battle with cancer on Sept. 1. he worked and traveled when he was able and remained optimistic his reports were detailed to the point that about the future,” said Joe Forth, general questions were answered before you could manager. “He joined Tramac in the mid- ask. Tim was a straight shooter, no-nonsense 1990’s and went through a lot of changes type of person. He loved his work and was a with many of us. But one thing I knew — I fantastic communicator and teacher.” could always trust him and rely on him to do Along with his love of motorcycles, Mr. the right thing. No doubt about it.” Atchley was passionate about auto racing. His hands-on experience working on As a young man he owned and raced a sprint machines themselves gave Mr. Atchley car, and was well-known at most of the enormous credibility in the industry and as a tracks in the Midwest. One friend recalled manager. “The dealers’mechanics that worked with Mr. Atchley keeping his gear in the trunk of Tim knew he was able to do any task he his car at all times in case an owner needed a would ask them to do. This credibility last-minute substitute driver. Ron Van Dunk, a 16-year friend and colallowed Tim to immediately get to the heart league agreed that Mr. Atchley was an allof any problem and his training programs around reliable and consistent professional. were always well received,” recalled Tramac “Tim was two different people. There was colleague Jerry Fifer. Fifer also saw first-hand how Mr. the intense ‘at work’ Tim and then there was Atchley’s extensive product knowledge, the fun-loving Harley riding Tim. He was service experience and easy way with those always the kind of guy that would be there who worked for him allowed him to manage for you and do anything to help you, both in in a way that produced almost immediate business and personally. I miss him deeply,” mutual trust. he said.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 49

Howell Tractor

The Victor L Phillips Company

Mid Country Machinery

811 Sivert Drive Wooddale, IL 60191-2611 847/439-2150 Fax: 630/595-3855

4100 Gardner Ave. Kansas City, MO 64120 816/241-9290

3478 5th Ave South (Bus. Hwy 20) Fort Dodge, IA 50501 800/206-5936

Garden City KS 620/275-1996

4734 Sergeant Rd. (Hwy 63) Waterloo, IA 50701 319/234-8710

2770 May Road Peru, IL 61354 800/342-6072 Fax: 815/224-2538 480 Blaine Street Gary, IN 46406 800/852-8816 Fax: 219/977-4220 5444 11th St. Rockford, IL 61109 888/469-3555 Fax: 815/874-3034

Topeka KS 785/267-4345 Wichita KS 316/838-3346 Joplin MO 417/781-8222 Springfield MO 417/887-2729

106 8th Street Sergeant Bluff, IA 51054 712/943-4470


Page 50 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toll Road Widened to Accommodate Population Growth

A Case 721E wheel loader moves dirt on the toll road project. TOLL from page 1

and Reith Riley Construction Co., for the job. Since the fall of 2006, Indiana Toll-Roads Contractors LLC has worked on the Indiana Toll Road projects between mile post 10.6 and 20.27 — widening the major thoroughfare from two to three lanes. “The road will be widened and reconstruct — decks removed,” Jim Wiseman of Indiana Toll-Roads Contractors LLC, said. “ The upper decks are being removed. [We are also doing] earthworks, widening, new columns and supports, pretty much a total reconstruct.” Additionally, the project consists of concrete paving, asphalt paving, new bridge structures, new columns and earthworks. This design-build project was divided into three phases. Each phase included pavement and structure enhancements to accommodate an additional driving lane. Completion is scheduled for end 2010. These works are in accordance with the Mandatory Expansion Projects required by the Indiana Toll Road Concession and Lease Agreement. A Growing Population In operation since 1956, the Indiana Toll Road stretches 157 mi. across Indiana from Ohio to the Illinois state line. The highway links Chicago with the eastern seaboard and also serves as the primary connecting route to the Chicago Skyway. “The traffic studies have been in place for years,” Wiseman said. “The Indiana Toll Road has seven counties along that span, but the most heavily traveled area is Lake County and Porter County, because of their proximity to Chicago. If you listen to the radio in this area, I-94 is constantly backed up, so [the toll road has] become a tremendous asset as an alternative route.” According to the U.S. Census Bureau, St. John’s population more than doubled. In Porter, it grew by 33 percent. As a result, this population growth was the impetus for widening the Toll Road. The project materialized in 2006 when the governor of

Mike Maloney (L), McCann Industries, speaks to the operator of the Case SV208 vibratory compactor.

Indiana, Gov. Mitch Daniels, leased the Indiana Toll Road to Indiana Toll Road Concession Company for 75 years. At that point, Ferrovial Agroman Indiana LLC and Reith Riley went into a partnership and the Indiana Toll-Roads Contractors LLC were formed to perform the Mandatory Expansion Works. “By the fall of 2006, the project started and has been in full gear ever since,” Wiseman said. “We’ve pretty much worked even through the winters because of our tight time frame. The project is slated to be finished by December of 2010.” Wiseman added that the project also employs a crew of 125 to 200 workers on any given day. “This area has exploded with Illinois residents moving from the south suburbs over here,” Wiseman said. “People are coming, so it only makes sense that you’ve got to prepare for the future by widening the roads.” Indiana Toll-Road Contractors LLC Field Superintendent Damien Masters (L) and McCann Industries’s Mike Maloney discuss the project.

Because of the heavy traffic caused by this population explosion, the state of Indiana had already begun widening the Indiana Toll Road, but then the state leased the road to Indiana Toll Road Concession Company LLC. “One of the commitments that Indiana Toll Road Concession Company LLC made, [when they leased the toll road], was that they would continue with this project and widen this portion of the road,” Wiseman said. Facing Challenges Indiana Toll-Road Contractors not only have to contend with traffic but with neighboring buildings and business including U.S. Steel. Wiseman said dealing with underground utilities has been the one of the biggest challenges on the Indiana Toll Road widening project. see TOLL page 51


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 51

Joint Venture Taps McCann Industries for Maintenance TOLL from page 50

“We’re finding surprises on a daily basis sometimes,” Wiseman said. “There’s everything from fiber optic lines to hidden sewers that have been there for a hundred years…When you’re right next to one of the biggest steel mills in the world, you can imagine what’s underground.” Indiana Toll-Roads Contractors LLC has “about a dozen” subcontractors to help with the underground surprises, but it has still been a challenge, mainly because utilities take time. “We’re under a strict time limitation, so any chance that we [can work, even in] inclement weather, we’re out there working. In the last winter, we really had a major effort through the winter and though rainstorms,” Wiseman said.

Wiseman added, on average, 15 to 25 machines work at the job site. The equipment has the Qualcom Tracs system installed on it, and the system doesn’t just track stolen equipment. It also tracks things that are much more mundane, such as when to change the oil. “[McCann] knows when it’s time for servicing, whether it’s a $100 service, a $500 service, a $1,000 service, whether it needs an oil change or it’s time for filters or it’s time for transmission fluids,” Wiseman said. “At that point, McCann calls us and we give them approval to go forward.” Like clockwork, McCann does the maintenance and then

sends an invoice. “And it’s done. It’s one stop shopping. It’s been really effective and very easy to track that way,” Wiseman said. Maloney added, “Our service manager, Tom Crawford, coordinates with the Indiana Toll Road Contractors field personnel. [They determine] when the most opportune time is to service [the equipment] to keep the disruption to a minimum, so we go out evenings or on a Saturday or when we know the machine is down to get the maintenance done.” Most of the maintenance is done onsite. “There’s been minimal down time,” Wiseman said. see TOLL page 66

Cutting Bridges in Half The Indiana Toll Road project runs across different landscapes including the Grand Calumet River. Engineering the project around the snaking river also has been challenging at times. Wiseman noted that, during construction, Indiana TollRoad Contractors LLC also were required to maintain two lanes of traffic in each direction. “There are areas where we’ve actually got to split the bridge move traffic to one side while we tear the other side down, and finally and jack it up to right elevation and perform a brand new deck, which becomes a huge engineering feat,” Wiseman said. Big effort is also put in to maintain two lanes of traffic in each direction, and that’s important on a project like this, because many commuters depend on the Indiana Toll Road. Maintaining the Machines Because of the size of the project, Wiseman commented that Indiana Toll-Road Contractors has been using Case equipment, rented from McCann Industries, for the project. “It’s worked out absolutely wonderful,” Wiseman said. “We’ve had a wide variety of Case equipment out there and it has performed beautifully.” Currently, there are 13 machines on the job: six Case excavators — two CX210s, a CX225, two CX330s and a CX290; two 721E Case wheel loaders; two FB208 vibratory compactors; an SV212 vibratory compactor; two 850K dozers; and a 580 Super M.

8

Brands You Can Trust... Hundreds Of Tough Attachments Get Back 2 Work with performance-driven attachments that show up ready to dig, move, scrape, compact, clean, rake and drill every day on your highway- and bridgerelated jobs. Work with the brands that have always delivered great results. To contact your local Territory Manager, visit our Web site and call us today.

E-mail: back2work@paladinbrands.com

A Case 850K crawler dozer does some grading below the Indiana Toll Road.

* Contact your local territory manager for full details


Page 52 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SEE • SHOP • COMPARE.

SEMINARS & TRAINING SESSIONS

The latest makes and models of Construction Equipment, Trucks, Trailers, Attachments, Contractor Supplies and Services.

Networking and Educational Opportunities, Seminars, Training Sessions, Industry Roundtables.


Trucks & Trailers

SECTION

T800, T370 Trucks Help Kokosing Construction Reduce Costs As one of the largest contractors in Ohio, Kokosing Construction has been growing and prospering since 1951. The company is about as diverse as it gets with operations in 10 states, in 25 different fields — from asphalt paving and bridge building to laying sub aqueous pipeline and building water treatment plants. “In a down economy, it helps to be diversified,” said Wayne Queen, trucking manager of Kokosing. “It also helps to have a well-run equipment operation to control costs, which allows us to be ultra competitive on bids. It’s another thing we feel separates us from the competition.” Kokosing Construction runs nearly 2,000 pieces of heavy equipment. Running nearly 2,000 pieces of heavy equipment, which includes Class 7 and 8 trucks, dozers, excavators, cranes and a litany of other equipment, the company has won numerous local and national awards for its projects, the quality of its work, and the management of its operations. “Safety and quality are at the core of Kokosing’s ideology,” said Queen. “While it may cost more up front for better equipment and investing in people to do a better job, it pays out in the end. As an example, we’ve been buying Kenworths as our primary truck for 10 years now and we can document their payback in lower operating costs and higher residual value.” The company runs 42 Kenworth T800s and a number of T370 medium duty trucks as lowboys, fuel and lube vehicles, boom trucks, flatbeds and water trucks. The company also uses a T370 and T800 as jet trucks — vehicles equipped The company runs Kenworth T800s and T370s as lowwith a tank and power sprayer (up to 65 gal. [246 L] per boys, fuel and lube vehicles, boom trucks, flatbeds and water trucks. minute at 2500 psi) to clean out sanitary lines. According to Queen, the value of a Kenworth has been costs on a project,” Queen said. “Looking at the costs of operating Kenworths over the past 10 years show we’ve had seen over time. “Some of the corners on the cabs of our other trucks have no increase, other than for fuel or lubes. That’s huge when rusted out, so corrosion — due primarily from the heavy you consider inflation, so our ‘real’ numbers have actually road salt we have in Ohio — really takes its toll on equip- decreased.” And the Kenworths keep on running. ment,” he said. “But with Kenworth’s aluminum and fiber“That’s vital of course,” Queen said. “Many in the conglass construction, it’s not a problem. Our goal is to get two body mounts out of a truck, and with a Kenworth, that’s a struction world look at water trucks as the last life for a rig. given. I can’t say that with confidence about other makes.” But we don’t. We’ve put into service new Kenworth T800s While service longevity is a key, serviceability and cost of with 4,000 gallon tanks. They’ll only put on 15,000 miles per ownership also is a bottom-line difference maker. The com- annum and operate 7 months out of the year, but they’re vital pany looks at its operational costs on a cost-per-hour, versus in keeping dust down on projects; for servicing our asphalt rollers; curing bridge decks; washing down concrete pavers cost-per-mile basis. “We look at these numbers when we assign equipment [with 100 foot water hose with adjustable spray head]. If we

have a water truck that’s down, that’s potentially $1,000 an hour we’re losing. We don’t take chances with our equipment.” And Queen said it’s the company’s overall philosophy that if it puts out the best in quality, it has to invest in the best. “We run two shifts — so night and day operations, with much of our equipment rarely resting,” he said. “Right now in the summer we’re virtually running at 100 percent equipment utilization. So, we can’t afford downtime. Plus we want our drivers to be productive and comfortable. The trucks have an excellent turning radius and are very comfortable to drive. One of our best decisions was to go with Kenworth’s extended day cab. The drivers love all the extra room.” The Kenworth extended day cab enhances driver comfort with an additional 6 in. of length and 5 in. of cab height compared to Kenworth’s traditional day cab. The extended day cab also offers 2 more inches behind the wheel, additional leg room, up to 21 degrees of recline in the driver’s seat, and 2 extra cu. ft. of storage behind the driver’s seat. Dealer support and spec’ing assistance also comes into play. Queen said his relationship with Columbus Kenworth is excellent and a creative spec’ing process between the dealership and Kenworth engineering helped Kokosing solve a major challenge. “We had a long-term project where we had to go over a 30 to 35 percent grade over rock and dirt. We worked with Kenworth to spec a T800 fuel truck with a locking rear differential, a Hendrickson PRIMAAX suspension — air bags with torsion bars, and a 470 hp engine with 1,650 foot pounds of torque driven through a 10-speed transmission with oil pump. The rear axle ratio is 4.78. The truck works beautifully.” While Kokosing generally keeps its T800s for eight to nine years or 800,000 mi. (whichever comes first), there is no shortage of buyers for the second life of the Kenworths. “We have an excellent maintenance program and keep detailed records,” said Queen. “We’ve never had to trade in our vehicles — we’ve always had operators waiting in line for our trucks. And another plus is resale value. We command high value when we sell our Kenworths.” For more information, visit www.kenworth.com. (Editor’s note: This article originally appeared in teh Ohio state supplement.) CEG


Page 54 • November 14, 2009 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Felling’s Air Tilt Deck-Over Eliminates Need for Hydraulics In September of this year Felling Trailers released the Air Tilt Deck-Over. This design utilizes air, powered from the tow vehicle, to tilt the trailer and optional ramps, eliminating the need for hydraulics. The air power from the tow vehicle fills two air bags, which then raise the trailer smoothly; the air bag will then keep the deck in the tilted position to allow for loading/unloading of multiple pieces of equipment. The deck then lowers itself by releasing the air pressure at a controlled rate to prevent the deck from slamming down. These trailers also are

equipped with Felling’s air-latch system (deck lock). This allows the user to lock and unlock the deck with the flip of a switch instead of working with cumbersome levers or walking from one side of the deck to the other. Towing capability and balance were achieved by placing the axles further back on the Air Tilt model than other tilt trailers on the market. These models also are useful for transporting low

clearance equipment such as pavers, scissor lifts, forklifts and more with its low-clearance loading angle. With the option of ramps, a load angle as low as 7 degrees can be achieved for loading equipment. In the construction of this trailer Felling uses a high grade 80 steel for the main structural beams that was fabricated inhouse. The use of these beams in turn

increases the trailer’s strength yet reduces the total trailer weight. There are two base models for the Air Tilt; the FT-40 TA, which has a load capacity of 40,000 lbs. (18,143 kg) and the FT-50-3 TA with a load capacity of 50,000 lbs. (22,679 kg). Standard Features include • Deck — white oak 2 in. nominal and 6 ft. wood inlaid beavertail • Main beam and crossmembers — high strength grade 80 steel • Approximate deck height — 32 in. loaded • Tilting mechanism – (2) air bags • Felling Air-Latch System (deck lock) • Tie downs and storage — 10 D-Rings and toolbox with lockable cover • 25,000 lb. oil bath axles (CTR) • Brakes — 2S/1M with park brakes on all axles • 5-year limited structural warranty • 3-year paint warranty For more information, visit www.felling.com.

The Air Tilt Deck-Over utilizes air, powered from the tow vehicle, to tilt the trailer and optional ramps, eliminating the need for hydraulics.

HTB LT Rear Air Suspension Available on ProStar Trucks Hendrickson’s weight saving HTB LT rear air suspension is now available on International ProStar trucks, Hendrickson Truck Suspension Systems officials announced. A lightweight, non-torque reactive rear air suspension, HTB LT delivers the additional advantages of smooth ride and low maintenance and weighs in as the lightest suspension in its class, saving up to 263 lbs. (119 kg) compared to industry standard 40,000 lb. (18,144 kg) suspensions, according to the manufacturer. Fleets in weight sensitive applications such as tankers, bulk haulers and refrigerated carriers, where a pound saved is an additional pound of payload hauled, derive great benefit from HTB LT. The weight savings is attributed to its optimized design featuring parallelogram geometry, which eliminates leaf springs and reduces components for

additional weight savings. HTB LT’s torque box system improves multi-axial stability and control, according to the manufacturer. The cross-member, frame hangers and torque rods are efficiently designed to reduce weight while improving durability. Large, direct acting air springs carry 100 percent of the vertical load, as compared to trailing arm suspensions where vertical load is shared between air springs and leaf springs. This key difference reduces vibration and harshness. HTB LT’s centrally placed frame hanger eliminates the dual hangers found in a trailing arm suspension. Innovations like shock absorber mountings integrated with the torque rod further reduce complexity and part count. For more information, call 630/910-2800 or visit www.hendrickson-intl.com.

Keep Up With All the Industry News Subscribe to

Construction Equipment Guide Today! Toll Free

800/523-2200


Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • November 14, 2009 • Page 55

Your GM Full Line Parts Dealer

Only 2 Left!

2009 Silverado Service Body 1 Ton Gas with Snow Plow Prep!

$25,600 +T.T.L.

Only 6 Left!

12’ Cube

$21,545 +T.T.L.

Only 3 Left!

15’ Cube with Ramp

$24,390 +T.T.L.

Huge 2009 Tax Savings!

Tel: (952) 435-8501 • Fax: (952) 435-6547 800-231-8723 • Email: jzadurski@grossmanchev.com Service open till 6:00 PM Monday thru Friday Price Includes All Incentives

HUGE INVENTORY!


Page 56 • November 14, 2009 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 Fax: 630-627-8711 Big Rock 47W247 US Highway 30 Big Rock, IL 60511 630-556-3111 Fax: 630-556-3749 Bolingbrook 250 East Frontage Road Bolingbrook, IL 60440 630-739-7770 Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 Fax: 312-421-3502 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 Fax: 708-597-9945 McHenr y 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 Fax: 815-385-2975 Scherer v i l l e 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 Fax: 847-526-9448 www.McCannOnline.com

Vermeer Sales & Ser v i c e 1675 126th St. West Burnsville, MN 55337 952-890-6144 Fax: 952-882-2980 www.vermeerofminnesota.com

Midwest Trailers Plus, Inc.

Farm-Rite Equipment Inc.

548 29th St. West Des Moines, IA 50265 515-223-8463 Toll Free: 888-560-2787 Fax: 515-223-6446 www.midwesttrailersplus.com

901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 www.farmriteequip.com


Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • November 14, 2009 • Page 57

Commercial Close-Out

12' Dually Cube $27,995

Red 4x4 Service Body $25,995

12’ WorkPro Cube $34,995

Utility Van $23,995

1 Ton Work Van $20,995

Red Utility Van $32,995

15’ Cube Van $23,995

Dump Truck $32,995

12’ Flatbed $25,995

4x4 8’ Flatbed $26,995

12' Cube Van $29,995

Service Body $24,995

877-850-9977 12475 Plaza Drive, Eden Prairie, MN 55344

www.suburbanchev.com ©2008 GM Corp.

*All Sale Prices Include Manufacturer Rebate & Commercial Rebate For Qualified Commercial Customers To Dealer, Not Including Tax Or License.”


Page 58 • November 14, 2009 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Scharber & Sons, Inc. 13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700 www.scharbers.com

Naperville 1400 W. Ogden Ave. 630-355-7150 South Holland 310 W. 162 St. Rt. 6 708-331-6362 Rockford 3110 Prairie Rd. 815-961-3160 Wauconda 1560 North Old Rand Rd. 847-526-7700 Rockdale 600 Walnut Ct 815-730-9011 www.westsidetractorsales.com

949 3rd Ave. Windom, MN 56101 507-678-2752

6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949 3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

Columbus Branch 50 E Kingston Ave Columbus, OH 43207 614-443-6541 Fax: 614-449-0182 www.columbusequipment.com Cadiz Branch 290 Old Steubenville Pike Cadiz, OH 43907 740-942-8871 740-942-3611 Canton Branch 1601 Shepler-Church Ave. SW Canton, OH 44706 330-453-4521 330-453-4701

Painesville Branch 864 Richmond Road Painesville, OH 44077 440-352-0452 440-352-0730 Cincinnati Branch 11512 Gondola St Cincinnati, OH 45241 513-771-3922 513-771-6547 Dayton Branch 7570 New Carlisle Pike Dayton, OH 45424 937-879-3154 937-879-3688 Jackson Branch 1611 Pattonsville Rd Jackson, OH 45640 740-288-0222 740-286-0808

Richfield Branch 3942 Brecksville Rd Richfield, OH 44286 330-659-6681 330-659-4760 Toledo Branch 12500 Williams Rd Perrysburg, OH 43551 419-872-7101 419-874-7413


Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • November 14, 2009 • Page 59

WKDQ 7+( %266 ;7 OLQH RI SORZV LQFOXGLQJ WKH 1(: 3RO\ 3RZHU 9 ;7 $ URFN VROLG FRPELQDWLRQ RI SURIHVVLRQDO JUDGH WRXJKQHVV 3RZHU 9 YHUVDWLOLW\ DQG VXSHU VOLFN SRO\ HI¿FLHQF\ WKH QHZHVW ;7 LV XQOLNH DQ\ SORZ LQ WKH LQGXVWU\ %XW WKDW¶V QR VXUSULVH FRPLQJ IURP 7+( %266 :H¶YH EHHQ GULYLQJ WKH LQGXVWU\ IRUZDUG IRU \HDUV ZLWK SURGXFWV WKDW PDNH \RXU MRE IDVWHU DQG HDVLHU 6LPSOH DV

_ 6DOHV _ 6HUYLFH _ 3DUWV _ 5HQWDOV _ 5HEXLOGV

= O L A J A M Q L L I A J P ? K I ? A C

Dierzen Trailer Co. CUSTOM BUILT MIDLAND DUMPBODIES & TRAILERS

Newark, IL (815) 695-5291

Mailhot and Custom Telescopic Hoists

Building Trailers To Meet Your Needs

Custom Welding & Fabrication – We Repair All Competitor Boxes

• Watson Chalin & Ridewell Pusher & Tag Axles • Toolboxes • Strobes & Vibrators • Custom Contractor & Tree Bodies • PullTarp & Roll-Rite Tarp Systems • Replacement Dump Bodies & Tailgates • Bibeau Dump Bodies • Tafco Platform & Contractors Bodies • Bonnell Sanders & Snow Plows • Wet Kits • Cab Guards • HTC – Hydraulic Truck Conveyors • Frame Stretching 21980 KENRICK AVE. • LAKEVILLE, MN 55044 PHONE: (952) 469-1006 FAX: (952) 469-1152 WWW.MIDLANDEQUIPMENTCO.COM

Kewanee, IL (309) 853-2316


Page 60 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. 325 OR 330 BL OR CL 325 9R 330 MUST HAVE 3306 ENGINE, 36" TRACT, JACK HAMMER AND 70 TO 80% U/C Contact: SAM Phone: 940-655-8462 Email: s-mahoney@lycos.com –––––––––––––––––––––––––––––––– KUBOTA REAR HYDRAULIC OUTLETS I WANT TO CONNECT UP TO 4 QD FOR REAR ATTACHMENTS ON MY KUBOTA 3750 TRACTOR. I HAVE EXISTING 3POINT & MY TRACTOR HAS EXISTING LEVER SLOTS FOR CONTROL. USED IS OK. Contact: TERRY Phone: 206-241-0630 Email: donlin.te@clearwire.net –––––––––––––––––––––––––––––––– CAT DEMOLITION BUCKET USED Contact: RICK Phone: 860-428-0159 Email: aliciabeth@sbcglobal.net –––––––––––––––––––––––––––––––– JOHN DEERE OR HITACHI 160C LC Contact: DAVE CAPODICE Phone: 309-275-1927 Fax: 309-828-1960 Email: dcexcavating@aol.com –––––––––––––––––––––––––––––––– LOADERS, GRADERS, EXCAVATORS LOOKING FOR EQUIPMENT TO PURCHASE. WE CAN ALSO HELP YOU LOCATE EQUIPMENT YOU’RE LOOKING FOR. Contact: RHONDA SCHEER Phone: 610-544-3399 Email: rhonda@scheerbrothers.com –––––––––––––––––––––––––––––––– ANY TYPE OF STEEL I BUY ANY TYPE OF NEW, USED OR SURPLUS STEEL INCLUDING SHEET PILING, H-PILING, PIPE PILING, WIDE FLANGE BEAMS, PLATES, PIPE, TUBING ETC... Contact: MICHAEL KAYE Phone: 609-882-6983 x 104 Fax: 609-882-7458 Email: mkaye@capitalsteel.org –––––––––––––––––––––––––––––––– CASE/DAVIS TRENCHER TF900/TF1000 DEAD OR ALIVE Contact: STEVEN H. MILLER Phone: (260) 341-2140 Fax: (260) 724-4165 Email: stevenhmillerconst@yahoo.com –––––––––––––––––––––––––––––––– OHIO SCRAP MAGNET Contact: MARK VIA Phone: 540-745-3405 Fax: 866-905-5488 Email: viatruck@swva.net –––––––––––––––––––––––––––––––– CAT 345B TRACKS/PADS Contact: BILL KUKURIN Email: bkukurin@kukurin.com –––––––––––––––––––––––––––––––– BOBCAT 323 COMPACT EXCAVATOR I AM LOOKING FOR A COMPACT EXCAVATOR SIMILAR TO THE 323. Contact: JASON Email: piercejasona@gmail.com ––––––––––––––––––––––––––––––––

I AM LOOKING TO BUY CONTRACTOR D6KLGP Contact: JEAN MAURICE BOUTIN Phone: 450-346-8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– VIBRO HAMMER Contact: MIKE DONNES Phone: +61427775849 Fax: +61892932261 Email: mike-jd@bigpond.com –––––––––––––––––––––––––––––––– FINAL DRIVE Contact: ROBERTO J PALACIOS Phone: 786-287-7056 Fax: 305-573-7038 Email: rpalacios@cargoawaycorp.com –––––––––––––––––––––––––––––––– CATERPILLAR D11R CRAWLER TRACTORS WE NEED ONE POSSIBLY TWO 8ZR OR 9TR SERIES PARTS OR CORE REBUILD MACHINES. SU AND SINGLE SHANK PREFERRED. ANY LOCATION WORLD WIDE. IF YOU HAVE A MACHINE MATCHING OUR NEEDS PLEASE SEND DETAILS, PHOTOS AND PRICE. Contact: CHARLES SOLOMONE Phone: 719-689-2434 Email: csolomone@tradewindequipment.com –––––––––––––––––––––––––––––––– CAT D11T | CAT D11T. NEW UP TO 4000 HOURS. Contact: PAUL CROLLA Phone: +47-22.207696 Email: m.crolla@sky.com –––––––––––––––––––––––––––––––– Wrecked or burnt Morbark Model 13 wood chipper for parts. Contact: Norma Phone: 724-887-9375 Fax: 724-887-4899 Email: lewequip@gmail.com –––––––––––––––––––––––––––––––– VOLVO L120B OR L120C - (1) VOLVO L120B OR L120C, ANY YEAR, ANY CONDITION Contact: IVAN OCAMPO Email: iocampo@jycexports.com –––––––––––––––––––––––––––––––– KOMATSU D85A21 - 4 X KOMATSU D85A-21. NEW UPTO 3000 HOURS. Contact: PAUL CROLLA Phone: +47-22.207696 Email: m.crolla@sky.com –––––––––––––––––––––––––––––––– KUBOTA L39 OR NEW HOLLAND TC40 WOULD LIKE EITHER A KUBOTA L39 OR A NEW HOLLAND TC40A Contact: GERRY PAOLIN Email: apaolin@cogeco.ca –––––––––––––––––––––––––––––––– FRONT LOADER FOR A KUBOTA L5450 Contact: CHARLIE LOVEALL Phone: 412-445-1878 Email: cloveall@comcast.net –––––––––––––––––––––––––––––––– FELCO ROLLER BUCKET Contact: DONALD BEARD Phone: 828-324-6774 Fax: 828-324-9632 Email: kelly@neillgrading.com ––––––––––––––––––––––––––––––––

RAYGO RUSTLER 404 PARTS MACHINE Contact: WARREN CARD Phone: 423-332-2223 Fax: 423-332-9444 Email: me13158@aol.com –––––––––––––––––––––––––––––––– CRANE BOOM & BASE FOR BUCYRUS ERIE 30B SUPER Contact: VINCENT NERI Phone: 860-664-8042 Fax: 860-664-9175 Email: vneri@occllc.com –––––––––––––––––––––––––––––––– JD 595D,495 - LOOKING TO BUY JOHN DEERE 595 WHEELED EXCAVATOR OR 495 JD ANY YEAR Contact: IMTIAZ Phone: 647-887-4786 Fax: 905-497-8633 Email: machineryexporters@hotmail.com –––––––––––––––––––––––––––––––– LATE MODEL SOMERO POWER RAKE NO RETAIL DEALS PLEASE. Contact: TOM NACEY Phone: 651-214-1694 Email: tnacey@comcast.net –––––––––––––––––––––––––––––––– BADGER 460 Contact: COREY Email: westfallconstruction@juno.com –––––––––––––––––––––––––––––––– NEED NOW FROM CONTRACTOR ONLY 4 BULLDOZERS 375A 3 Contact: JEAN MAURTICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– CAT 330DL Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– 330BL CAT EXCAVATOR Contact: ROD MARTIN OR PETER CORCH Phone: 717-733-3593 Fax: 717-733-8531 Email: rod@martinexc.com –––––––––––––––––––––––––––––––– VIBRATORY ROLLERS • WANTED 05 OR NEWER 66-84 IN ROLLERS 1000 HRS OR LESS Contact: JIM Email: jimdobinson@telus.net –––––––––––––––––––––––––––––––– CAT 140H - CAT 140H GRADER, 17.5X25 TYRES, BELOW 3500 HOURS, RIPPER Contact: PAUL CROLLA Phone: 47-22.207696 Fax: 44-161.226-8525 Email: santina@online.no –––––––––––––––––––––––––––––––– JOHN DEERE WHEELED EXCAVATOR595 - JOHN DEERE WHEELED EXCAVATOR 495,595 Contact: IMTIAZ Phone: 647-887-4786 Fax: 9054978633 Email: machineryexporters@hotmail.com –––––––––––––––––––––––––––––––– I AM LOOKING TO BUY 650J NEW LGP Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@videotron.ca ––––––––––––––––––––––––––––––––

CAT D8H STARTER - 46A22000 SERIES DIRECT ELECTRIC STARTER. Contact: JOHN NEVINS Email: johntnevins@comcast.net –––––––––––––––––––––––––––––––– 2004 CAT BACKHOE 426B Contact: DOUG LAUGHLIN Phone: 607-742-9017 Fax: 607-795-4157 Email: laughlincontracting@msn.com –––––––––––––––––––––––––––––––– BALL JOINT FOR INGERSOLL RAND VR636 - LOOKING FOR USED BALL JOINT FOR INGERSOLL RAND VR636 ALL TERRAIN FORK LIFT. PART# 59210572. Contact: JOSH KAMMEYER Phone: 269-685-9525 Fax: 269-685-5888 Email: a1rentall@yahoo.com –––––––––––––––––––––––––––––––– BRIDGE DECK FINISHER Contact: BRIAN SKAJEM Phone: 909 772 1749 Fax: 951 352 4301 Email: brianws4300@yahoo.com –––––––––––––––––––––––––––––––– NEED PARTS FOR JCB BACKHOE 3C1400B - NEED LOADER CONTROL ALSO NEED 18.4-24 TIRES Contact: KLAUS MUELLER Phone: 239-980-2000 Fax: 239-418-1000 Email: klausdesign2000@yahoo.com –––––––––––––––––––––––––––––––– AUSTIN WESTERN BLADE PACER 300 DEAD OR ALIVE Contact: LYLE CARPENTER Phone: 701-549-3727 Email: lcarpent@utma.com –––––––––––––––––––––––––––––––– REAR RIPPER FOR CAT D5NXL Contact: WENDELL CAIN Phone: 770-381-8984 Fax: 770-381-6977 Email: wendell@cainandtodd.com –––––––––––––––––––––––––––––––– GRADALL 660E CRAWLER | GRADALL 660E CRAWLER WITH 5.9 CUMMINS Contact: SCOTT RUBRIGHT Phone: 724-468-4700 Fax: 724-468-4975 Email: scottr@kt-grantinc.com –––––––––––––––––––––––––––––––– KOMATSU D355 Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– 1976-1979 CAT 12G Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– CATERPILLAR CRAWLER DOZER Contact: GREG HENDRIX Phone: 936-327-5430 Fax: 936-327-5108 Email: greg@hendrixmachineryllc.com ––––––––––––––––––––––––––––––––

LOADER CAT 970FII,966FII,966D VERY GOOD CONDITION Contact: MANSOUR HASEB Phone: +202 26632820 Fax: +202 26632820 Email: mansorhaseb@gmail.com –––––––––––––––––––––––––––––––– 50 TO 75 TON CONVENTIONAL TRUCK CRANE Contact: JERRY WADE Phone: 713-248-7971 Fax: 281-348-0854 Email: menade_inc@msn.com –––––––––––––––––––––––––––––––– TELEHANDLER Contact: TONY SPADA Phone: 407-509-4000 Fax: 407-850-0256 Email: memovers@aol.com –––––––––––––––––––––––––––––––– CRAWLER CRANE Contact: VINCENT Phone: 860-664-8042 Fax: 860-664-9175 Email: vneri@occllc.com –––––––––––––––––––––––––––––––– WHEEL LOADER-JD 624J, QUICK CONNECT, LOW HRS, PREFER SIDE DUMP. Contact: JOHN NEVINS Email: johntnevins@comcast.net –––––––––––––––––––––––––––––––– WANTED KOMATSU DOZER 155,375 Contact: ALHARTHI Phone: 00447875086827 Email: deerah1est@yahoo.com –––––––––––––––––––––––––––––––– 1972 96J1729 DS CAT DOZER Contact: CHUCK GREENE Phone: 843-669-8481/843-621-4411 Email: weshair729@yahoo.com –––––––––––––––––––––––––––––––– FLATBED TRAILER Contact: JIMMY ELROD Phone: 864 226 9380/ 843 238 8588 Email: jimmyelrd8@aol.com –––––––––––––––––––––––––––––––– I AM LOOKING TO BUY PIECE 355 KOMATSU Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– MASSEY FERGUSON 50HX "S SERIES" BACKHOE Contact: STONE Phone: 937-313-0321 Email: stoneconst1997@yahoo.com –––––––––––––––––––––––––––––––– CAT WHEEL LOADER 950B,E,F 936E Contact: ALHARTHI Phone: 00447875086827 Fax: 00441912713032 Email: deerah1est@yahoo.com –––––––––––––––––––––––––––––––– CAT WHEEL LOADER 966D,E,F,FII Contact: ALHARTI Phone: 00447875086827 Fax: 00441912713032 Email: deerah1est@yahoo.com –––––––––––––––––––––––––––––––– TOPCON HIPER LITE+ Contact: MIKE PIEPER Phone: 319-372-2276 Fax: 319-372-2277 Email: pi2279@yahoo.com ––––––––––––––––––––––––––––––––

BRUSH CUTTER Contact: RON SHEW Phone: 618-889-2179 Fax: 618-993-2441 Email: r_shew@hotmail.com –––––––––––––––––––––––––––––––– D8N | GOOD RUNNING MACHINE, CAB, SHOT U/C. NJ AREA. Email: johntnevins@comcast.net –––––––––––––––––––––––––––––––– IAM LOOKING TO BUY D6D WITH RIPPER Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– CAT 12G MOTOR GRADER | MACHINES MUST BE 61M SERIAL NUMBER PREFIX - ENCLOSED CAB - WITH SCARIFIER. MACHINES CAN BE LOCATED ANYWHERE IN THE UNITED STATES AND MUST BE PRICED UNDER $45,000.00 Contact: DAN VANDERMEER Phone: 843-393-8495 Fax: 843-393-8382 Email: dan@dutchmanglobal.com –––––––––––––––––––––––––––––––– CAT D10 | CATERPILLAR D10N AND D11N CRAWLER TRACTORS. MACHINES NEED TO HAVE A SINGLESHANK RIPPER. ANY YEAR ANY LOCATION ACCEPTABLE. Contact: CHARLES SOLOMONE Phone: 702-562-9285 Email: csolomone@tradewindequipment.com –––––––––––––––––––––––––––––––– CRAWLER CRANE | 1997 TO 2007 100 TO 150 TON CRAWLER CRANE; 3 DRUMS; 150 BOOM Contact: JOHN NEVINS Email: johntnevins@comcast.net –––––––––––––––––––––––––––––––– CAT 12H OR 12N GRADER | MUST HAVE REAR RIPPER AND FRONT PUSH BLOCK, CAB AND AIR, WITH A COUPLE THOUSAND HOURS ON THE MACHINE. PLEASE WHOLESALE ONLY. Contact: RICHARD H. SMITH Phone: 908-479 8383 Email: unitedequip@earthlink.net –––––––––––––––––––––––––––––––– GROVE 1012 CARRY DECK INDUSTRIAL CRANE Contact: DON AUSTIN Phone: 512-750-9742 Fax: 512-301-0163 Email: daustin8@austin.rr.com –––––––––––––––––––––––––––––––– ROAD EQUIPMENT Contact: JEAN PASCAL OUEDRAOGO Phone: 0022522443339 Fax: 0022522443260 Email: jpascal65@yahoo.fr –––––––––––––––––––––––––––––––– VERMEER 252 STUMP GRINDER Contact: ERIC Phone: 309-351-9520 Email: gotdirt627@yahoo.com –––––––––––––––––––––––––––––––– SHUTTLE BUGGY ROADTEC SB2500 SHUTTLE BUGGY Contact: JOHN NEVINS Email: johntnevins@comcast.net ––––––––––––––––––––––––––––––––


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 61

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95 More Bargains on pg 63

2009 IROCK Crusher RDS-15 Closed Circuit Crushing and Screening Plant. For more information 22-23 call Sean Donaghy at 330/931-9595 EB

2007 Mustang ME3003 - Mini Excavator, with long arm and 16" bucket, 36 HP, 112 Hrs, Full warranty .................................................$24,700 Top Notch Equipment 612/290-0640 22-23 PK

2006 Mustang 2041, 236 Hrs, 67.5" bucket, 43 HP Yanmar, 1350# lift............................$12,900 Top Notch Equipment 612/290-0640 22-23 PK

The 2009 EZ Screen 1200XL, with a 5'x6' screen box, and a patented non-hydraulic screen drive. The EZ 1200XL works with a 1/2 to 2 yard loader. Now with a 20 Horsepower Deutz Diesel Engine.......$39,500 plus freight Other Screens Available 22-23 EB www.ez-screen.com • 866/745-5828

2006 Case 1850K, s/n HHA431139, 704 Hrs, Cab w/Heat & A/C, 13'6" 6-Way Blade, 30" Pads, Cold $180,000 Start (48 Mo/4000 Full Machine Warranty).$ Call Mark at (630) 878-8767 23-24 JM

2007 Case 1850K, s/n N7HC51103, 744 Hrs, Cab w/Heat & A/C, 13'6" 6-Way Blade, 30" Pads, Cold Start (48 Mo/4000 Full Machine Warranty until $195,000 7/15/11)........................................................$ Call Mark at (630) 878-8767 23-24 JM

2007 Case 1150K, s/n N7DC00076, 786 Hrs, Cab w/Heat & A/C, 132" Dozer Blade, 30" Pads, Cold Start $129,000 (4000 Full Machine Warranty) .....................$ Call Mark at (630) 878-8767 23-24 JM

2002 John Deere 250 Open Station, 1810 Hrs, weight kit, KV0250A351153 ...........$12,500 22-23 PK 763/444-8873

1997 Bobcat 873, with New Tires, 78” Bkt, 4069 Hrs................................................................$9,950 Pat Kelly Equipment Co. Call Gary 314/895-9500 22-23 JM

1992 Bobcat 753, with Only 1780 Hrs, 60 Tooth Bkt ...................................Priced to sell at $7,500 Pat Kelly Equipment Co. Call Gary 314/895-9500 22-23 JM

2003 John Deere 320 Skid, Cab, Heat, qt, 72" bucket, 1365 Hrs, 66 HP, s/n T00320A101325.... ................................................................$18,500 763/444-8873 22-23 PK

Rosco SPRHH Chip Spreader, 693 Hours, 1988 Grove AP 308, 8 Ton Carry Deck, 24' Plus 10' gas Very Clean, Ready to go to work, 14' Head, $22,500 engine, new rotec, fresh paint .............................$ FOB Windom, MN. .................................$42,500 23-24 PK Dick Courts • 507-678-2752 Call Andy at (216) 316-1511 22-23 EB

2006 Manitowoc 12000 Crawler Crane, 120 Ton, 180'/40', upper boom point, block, ball. Self erection package, aux drum prepped, free fall on main and rear $695,000 drum, A/C, Serviced and ready to work!...........$ 22-23 EB Call Andy at (216) 316-1511

Deere 332 Skid Steer, Steel tracks, 2 speed, SSL cab, 2" seat belt, standard foot controls, cab w/wiper, floor plate, A/C & Heater, rear weight bracket w/8 weights, suspension seat kit, horn, 84" tooth bucket, Hyd option: Standard, Tire size: 14L-17.5 - Updated, 764 hrs ............................................................$34,500

Please Contact Eric Bischoff at 740/225-0566

23-24 EB

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

SEE YOUR BARGAIN AD IN COLOR. O N LY $ 5 0 E X T R A FOR TWO INSERTIONS

Here ' s how the BARGAIN ADS Work: • Supply us with a photo of a machine (Only one machine per Bargain Ad) and a maximum 17 word description plus contact and phone number. • Send Check for $95 with copy to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • The ad will run for two consecutive issues.

For more information, call Construction Equipment Guide today at

800/523-2200

Next Issue Closes November 20th


Page 62 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS AERIAL LIFTS Manlifts

215-245-2749 or Joe Villa 215-245-3729

COMPACTION EQUIP.

All Makes & Models Rental, Parts, Service, Training

Misc. Compaction Equip.

Modern Equipment Sales & Rental 800/445-4381

2001 CAT 836, 8923 hours .....................................$59,000 2004 CAT 836G, 7159 hours ...................................$355,000

AIR COMPRESSORS Compressors Ingersoll-Rand New & Used Parts Modern Equipment Sales & Rental 800/445-4381

ASPHALT EQUIPMENT Asphalt Rollers 2005 Cat CB224E, 160 hours .....................................$29,900 2004 Cat CB224E, 946 hours .....................................$19,900 2002 CB334D, 962 hours ...........................................Call 2004 CB334E, 2954 hours .....................................$27,000 2004 Cat CB534DXW, 832 hours ...........................$75,000 2005 Cat CS563E, 287 hours .....................................$75,000 2005 Cat CS563E, 1332 hours .....................................$75,000 2005 Cat CS563E, 1,778 hours .....................................$75,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Asphalt - Misc. Extreme Service Rotary Wheel Cutter Ship in 24 hours! Parts for all competitive units Call 218-863-6444 Attachments International www.attachmentsintl.com

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729 2007 Dynapac CA150PD, 66’’ drum, Cummins 3.3 8HP, canopy, smooth drum w/padfoot shell kit & blade, very good condition, 410 hours ....................................$68,570. 2007 Dynapac CA150D, 66’’ drum, Cummins 3.3 80HP, canopy, smooth drum, good condition, 150 hours...$64,800. 2007 Dynapac CA250D, 84’ drum, Cummins 110 HP diesel, canopy, smooth drum w/padfoot shell kit, good condition, 600 hours....................$69,280. B & W Equipment Co., Inc. 260/422-0945

CRAWLER TRACTORS Crawler Tractor 2006 Cat D4GXL, 1049 hours...................$69,000 2004 Cat D6RXLII, 4551 hours.................$155,000 2004 Cat D8RII, 3406 hours.................$369,300 1998 Cat D8R, 16,600 hours..............$143,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729 NH Construction Equipment New & Used Parts & Service

ATTACHMENTS

Modern Equipment Sales & Rental 800-445-4381

Hammers

EXCAVATORS

2003 Cat H160.............$55,000 2004 Cat H160.............$45,000

Hydraulic Excavators

Ransome CAT Call Tom Rosser

NH Construction Equipment New & Used Parts & Service

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 Modern Equipment Sales & Rental 800-445-4381 2006 Cat 303.5CCR, 698 hours.....................$39,900 2003 Cat 325CL, 2,998 hours................$108,300 2003 Cat 325CL, 6,987 hours..................$75,000 2005 Cat 330CL, 2,366 hours................$199,000 2006 Cat 345CL ME, 3,809 hours................$299,000 2003 Cat 345BL, 4,941 hours................$199,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

FORKLIFTS Industrial Forklifts Gradall/Lull Sales, Service, Training Modern Equipment Sales & Rental 800/445-4381

Rough Terrain Forklifts 2007 JCB 930, 6 cyl. 4WD canopy model with 22’’ clear view mast, 6,000 lb. lift w/60’’ ITA forks. Mint Condition. Pictures Available, 600 hours. ....................................$35,000. Farm-Rite Inc. 908/625-0697

2004 John Deere 120C, 24’’ pads, long arm, 42’’ Werk-Brau bucket, excellent condition, 1850 hours..................$69,900. 1999 Hitachi EX230 LC-5, A/C, long arm, 36’’ HD bucket, very good condition, 4708 hours..........................$69,900. JDE Equipment Co. 616/530-2000

2007 JCB 930, 6 cyl. 4WD canopy model with 22’’ clear view mast, 6,000 lb. lift w/60’’ ITA forks. Mint Condition. Pictures Available, 600 hours. ....................................$39,500.

Mini Excavators

Track Loaders

2003 Kubota KX-161, cab w/AC, rubber tracks, dozer blade w/hyd. thumb & 2 buckets, good condition, 2600 hours, pictures available ....................................$33,000.

Backhoe Loaders

Farm-Rite Inc. 908/625-0697 NH Construction Equipment New & Used Parts & Service

Farm-Rite Inc. 908/625-0697

2005 Cat 420D, 972 hours .....................................$49,000 2006 Cat 420EIT, 773 hours .....................................$65,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Skid Steer Loaders Modern Equipment Sales & Rental 800-445-4381 Yanmar VIO75, s/n 12634, max digging deoth 15’5’’, max reach 22’11’’, trvel speed 2.9 mph, bucket, good condition, 358 hours............................$65,000 405-348-4633

EXTRAS FROM DEFENSE DEPT. ORDER 5000# Pallet Forks $700 Landscape Land Planes $1350 Rock Buckets - 66’’ $2250

FORESTRY EQUIPMENT

Pick Up at Las Vegas Warehouse Call 218-863-6444

Logging Equipment

Wheel Loaders

1996 Caterpillar 320L stroke delimber, 31” pads, Balderson attachment, good condition, 7157 hours ...............$92,000

2003 JCB 407ZX Compact, cab, heat, A/C, radial tires, limited slip trans with 1.0 cu yd GP bucket and set of F/F.Good condition Pictures available, 2800 hrs......................$31,500.

Five Star Equipment Inc. 607/775-2006

Farm-Rite Inc. 908/625-0697 NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 2006 Cat 904B, 3,456 hours .....................................$39,000 2005 928GZ, 2519 hours .....................................$87,300 2006 Cat 938GII, 2,552 hours ...................................$119,000 2006 Cat 938GII, 441 hours ...................................$129,000 2006 Cat 972H, 3,180 hours ...................................$229,000 2003 Cat 980G, 7251 hours ...................................$199,000 2002 Cat 980G...................Call 1998 Cat 980.............$499,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Track Loaders 2006 Cat 953C, 721 hours ...................................$135,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

MISCELLANEOUS Misc NEW PARTS Hyundai - Mustang Okada - Sakai Yanmar Call: John Stevens or Jeff Brooks G & H Services, Inc. 973/383-3370 Fax: 373/383-5756

Service We Service What We Sell! Warranty, Maintenance and More!

PARTS Undercarriages NEW UNDERCARRIAGE PARTS

Caterpillar D3, D3B, D3C, D4C, 931...6.125 Pitch 6S8800MT Link Assy., (2), 36 section, dry, master pin, 9/16’’ bolt........................$849.00 Ea. 6S605MT Link Assy., (4), 36 section, dry, split master, 9/16’’ bolt........................$874.00 Ea. 6S9066MT Link Assy., (4), 36 section, SALT, split master, 9/16’’ bolt ...........$1,099.00 Ea. 6Y1339MT Link Assy., (4), 36 section, SALT, split master, 9/16’’ bolt ...........$1,105.00 Ea. 3657/37MT Link Assy., (2), 36 section, dry, master pin, 9/16’’ bolt........................$890.00 Ea. 3T6705MT Link Assy., (2), 36 section, SALT, split master, 9/16’’ bolt............$1,150.00 Ea. 6S8817MT Track Pads, (77), 16’’ single grouser, 9/16’’ bolt. ..................................$9.69 Ea.

Komatsu D30A, D31A, D31B, D37E, D31S, D31P... 6.0126 Pitch TR1103211292 Track Pad, (118), 14’’ single grouser, 14mm bolt............................$7.39. Ea. TR1113000260 Top Roller (2), complete w/shaft....$82.00. Ea. TR1113000281 Bottom Roller (9), double flange.......... .............................$103.00. Ea. G & H Services, Inc. 973/383-3370 973/390-7394 Cell Fax: 373/383-5756

Miscellaneous Parts ATTENTION CONTRACTORS! Large Supply of Wirtgen Grinding Parts, Sawblades & Tools. Great Prices!

Heavy Equipment, Light Equipment, Hand Tools & Gas Detectors

Call 630-837-3589 Leave Message

Norris Sales Company 610/279-5777

220 South Washington St, Carpentersville, IL


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 63

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

Bargains from pg 61

2003 Isuzu NPR, 4 cyl turbo diesel 175hp, 41k, very economic motor, 4 spd auto, flat bed w/ 4 tool boxes down the side and 1 main rear tool box that has a lot of storage space and is able to hold cutting torches. Also has built in fuel tank. 4 new tires. Asking $9,500 Very nice truck and runs very well......................A Ephratah Safety Systems • 518/993-2700 23-24 KH

1986 Intl Digger Truck w/ Telelect Digger Derick, diesel, auto trans, 43' corner mount fiberglass hyd. extension, 112,000 miles on it, good condition, runs great! Great for digging holes for ple barns, fences, setting roof trusses for barns, houses and garages, setting poles for electric servies for new home Asking $6,900 construction .........................................................A Ephratah Safety Systems • 518/993-2700 23-24 KH

1990 Bucket Chevy Asplundh model L38TM single man bucket, 5 spd w/ a 2 spd rear, 100,000 miles, good condition, brand new batteries, never been stored outside, great operating condition. Great for repairing or painting barns & houses, trimming trees, and decorating trees and houses at Christmas.. Asking $5,900 ..............................................................................A Ephratah Safety Systems • 518/993-2700 23-24 KH

1997 Kobelco SK150 Mark IV with brand new factory Cummins Engine, only 200 hours on new engine and 5300 on whole machine, weight 35,000 lbs., new thumb attachment and new Wain Roy coupler, new 48" hydraulic bucket, excellent operating condition and excellent appearance. Very Nice Call Machine!.................................................................................C Ephratah Safety Systems • 518/993-2700 23-24 KH

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (Only one machine per Bargain Ad) and a maximum 17 word description plus contact and phone number. • Send Check for $95 with copy to: Construction Equipment Guide 470 Maryland Drive • Fort Washington, PA 19034 • The ad will run for two consecutive issues. 1997 JCB 411B, S/N 527497, with 4179 Hrs, equipped w/AC, 3rd Function and Forks $40,000 Call 502/456-4050 Ask for Melissa or Albert 22-23 EB

Pile Driving

Your Ad Will Be Seen By Over 26,371 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

Mixers, Generators, Arrow Borads, Compaction, Excavators, Loaders!

Pile Driving & Drilling

800/523-2200 SCRAPERS

TRENCHER

Motor Scrapers

Trenchers

1998 Cat 627F, 9,740 hours. ...................................$299,000 1998 Cat 627F, 10,307 hours ...................................$299,000

Ditch Witch 3210D, s/n 342857, diesel, straight plow, 70% new tires, 24’’ feed blade, A330, s/n 2934 attachment, good condition..............$6,500. 2002 Ditch Witch RT90, hydrostat, 5’ mag. boom, like new 110k chain, 6 way BFB, rear steer, auto crowd, good condition, 2059 hrs. ...........$39,500. 2004 Ditch Witch 1820, 24’’ combo chain - like new, 6’’x24’’ headshaft & sprocket new, new tires, 18hp Honda, good condition, 425 hours..............$5,500. 2000 Ditch Witch HT 25, offset, 50/50 tooth chain, 30’’ boom, with backhoe, fair condition, 1126 hrs..............$10,500.

Now in PA & NJ Rentals * Sales * Parts * Service * New * Used Factory Rebuilds MKT Vibratory Driver/Extractors Excavator Mount MKT & MVE Diesel Pile Hammers & accessories MKT Hyd. Augers Flighting * Cutter Heads Custom Fabrication & Machining Eskridge Drills Dawson Hyd. Impact Hammers MVE & MKT Serving the Midwest Contractor Since 1933 Call John Henry 314/869-8600 Fax: 314/869-6862

RENTALS Rental www.norrissales.com Daily - Weekly - Monthly Competitive Rates

Norris Sales Company 800/547-RENT (7368) 610/279-5777 Construction Equipment Rentals Modern Equipment Sales & Rental 800/445-4381 Construction & Equpment & Supplies for the “Professionals” Daily - Weekly - Monthly & Long Term Rentals Available Stone, Wacker, Honda, Gehl, JLG to name a few ..... Norris Sales Company 610/279-5777 Construction & Industrial Equipment Rentals Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping Norris Sales Company 610/279-5777

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

TRAINING Operator Training Are your operators compliant with Federal Standards, OSHA, ANSI, ISO? MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

1994 Dresser 510C, 80 HP, 1.75 yd Bucket, cab, new tires...............................................POR Diesel Machinery 1-800/456-4005 Ask for Don or Herb 22-23 PK

Subscribe to CEG today... Get an edge on your competition! Construction Equipment Guide Midwest Edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. Call Toll Free! We now accept Visa, Mastercard & American Express!

SUBSCRIPTIONS:

One Year $65

(within United States & Puerto Rico Only)

CARDMEMBER’S NAME _________________________________________________________ COMPANY NAME _______________________________________________________________ STREET____________________________________ PHONE NO. ________________________

Ditch Witch Southwest 800-882-8141

CITY ______________________________________STATE _______ ZIP ________________

TRUCKS

TYPE OF BUSINESS _____________________________________________________________

Misc Trucks 2001 Cat 730, 9,126 hours ...................................$115,000 2004 Cat 735, 4,035 hours ...................................$249,000 2005 Cat 735, 3,738 hours ...................................$269,000 2006 Cat 740, 3,320 hours ...................................$305,000 1994 Cat D350D, 20,412 hours ...........................$49,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Check Enclosed

VISA

MASTERCARD

American Express

CARD NUMBER

EXP. DATE (Mo./Yr.) SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE ®

1-800/523-2200 FAX 215/885-2910

470 Maryland Dr. • Ft. Washington, PA 19034 Email: circulation@cegltd.com


Page 64 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS Bridgeport, NY Phone: 315-633-2944 • Houston, TX Tues., November 17, 2009 For: Late Model Construction, Earthmoving Equipment, Aerials, Forklifts, Support, Truck & Trailers • Manassas, VA Fri., November 20, 2009 For: Job Completion Auction of Cat, John Deere, Earthmoving Equipment & Rental Returns of Late Model Equipment

Aerials, Forklifts, Trucks, Trailers & Support Equipment • Cincinnati, OH Tues., December 29, 2009 For: Construction, Support Equipment, Aerial Lifts, Trucks & Trailers • Greenwich (Albany), NY Wed., December 30, 2009 For: Late Model Kobelco, New Holland, Cat, John Deere Earthmoving Equipment, Forklifts, Aerial, Support Equipment

Coming Auctions • Caorso, Italy December 3 & 4 • Toronto, ON, CAN December 7 & 8 • Polotitlan, Mexico December 8 • Statesville, NC December 8

• Providence, RI Sat.-Sun., November 21-22, 2009 For: Complete Liquidation of one of the Largest Privately Owned Rental Companies in New England!

• Kissimmee, FL Sunday thru Saturday., February 1-8, 2010 For: Annual 8 Day Sale of the Latest & Greatest Construction, Aerials, Forklifts, Cranes, Truck Tractors, Dump Trucks and All Types of Trailers and Support Equipment – THE REAL SALE!

• Dallas, TX Tues., December 1, 2009 For: Late Model Construction Equipment, Support Equipment, Aerials, Trucks & Trailers

• Newark, NJ DTBA For: Rental Fleet Construction, Aerial, Telescopic Equipment, Trucks & Trailers

• South Plainfield, NJ Fri., December 4, 2009 For: Property is SOLD! Complete Liquidation of Construction, Support Equipment, Trucks & Trailers

RITCHIE BROS. AUCTIONEERS Richmond, BC, Canada Phone: 402-421-2631

• Queretaro, Mexico Fri., December 4, 2009 For: Large Construction Equipment Auction, Support Equipment, Trucks & Trailers

• Krakow, Poland November 17

• Nashville, TN December 15

• Truro, NS, CAN November 17

• Minneapolis, MN December 15

• Houston, TX November 17 - 19

• Los Angeles, CA December 15 & 16

• Columbus, OH Sat., December 5, 2009 For: Construction, Forklifts, Aerial Lifts, Truck & Trailer Auction • Kissimmee, FL Thurs., December 10, 2009 For: Late Model Rental Returns of Construction, Support Equipment, Aerial Lifts, Telescopic Forklifts • Atlanta, GA Fri., December 11, 2009 For: Late Model Rentals Consisting of Construction, Support Equipment, Trailers, Trucks, Aerial Lifts & Forklifts • Ledyard (Foxwood Casino), CT Sat., December 12, 2009 For: Late Model Rental Fleet Construction, Support Equipment, Aerial Lifts, Trucks & Trailers • St. Louis, MO Thurs., December 17, 2009 For: Rental Fleet Equipment – Large and Small, Trucks & Trailers • San Bernardino, CA Fri., December 18, 2009 For: Large Rental Return Auction of Late Model Construction Equipment, Aerial Lifts, Forklifts, Trucks & Trailers • Atlantic City, NJ Sat., December 19, 2009 For: Late Rental Return Auction of Late Model Construction,

• Denver, CO December 8 & 9 • Columbus, OH December 9 • Jackson, MS December 10 • Chicago, IL December 10 & 11 • Olympia, WA December 10 & 11 • Farmington, NM December 14 • Dubai, United Arab Emirates December 14 - 16 •Pittsburgh, PA December 14

Wed., & Thurs., Nov. 18-19, 2009 For: Huge 2 Day Public Auction Selling Construction Equipment, Trucks, Trailers, Logging Equipment, Support Equipment

• Wallace, SC Tuesday, November 17, 2009 For: Construction Equipment, Truck, Trailers & Tools

HUNYADY AUCTION COMPANY Hatfield, PA Phone: 215-361-9099

• Pelzer, SC Wed.-Thurs, December 9-10, 2009 For: Annual 2 Day Winter Contractors Auction

• Souderton, PA Wed., November 18, 2009 For: Complete Liquidation of Scholl Bros. Excavating, Inc. • Waynesboro, VA Wed., December 9, 2009 For: Former Assets of Ennstone, Inc. and Lease Returns

• Foley, MN Fri., Dec. 4, 2009 For: Heavy Construction Equipment And Semi, Truck & Trailer

• Wausau, WI Wed., November 18, 2009 For: Construction& Excavating Liquidation – ONLINE ONLY www.purplewave.com RDO EQUIPMENT CO. AUCTIONS Fargo, ND Phone: 866-536-5189

• Prince George, BC, CAN December 17

• Phoenix, AZ November 19 & 20

• St. Louis, MO December 18

• Istanbul, Turkey November 21

• Narita, Japan Jan 27, 2010

• Brisbane, Australia November 24

• Las Vegas, NV Feb 5, 2010

IRON PLANET AUCTIONS Pleasanton, CA Phone: 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid!

• Grande Prairie, AB, CAN November 24 & 25

• Orlando, FL February 15-20, 2010

• Thurs., November 19, 2009 For: Construction Equipment

• Moerdijk, The Netherlands November 25-27

• Torreon, Mexico February 2010

• Thurs., December 3, 2009 For: Construction Equipment

CAT AUCTION SERVICES Shakopee, MN Phone: 866-750-9432

KISSIMMEE AUCTION COMPANY Spartanburg, SC Phone: 864-583-2700

• Saskatoon, SK, CAN December 2 • Fort Worth, TX December 2-4 • Montreal, QC, CAN December 3 & 4 • Polotitlan, Mexico December 8

• Kansas City, MO Tues., December 1, 2009 For: Construction Equipment, Trucks & Trailers DEANCO AUCTION Philadelphia, MS Phone: 877-898-5905 • Philadelphia, MS

• Wausau, WI Sat., Dec. 12, 2009 For: Construction Equipment, Trucks & Trailers PURPLE WAVE AUCTIONS Derby, KS Phone: 866-608-9283

• Moncofa, Spain November 19 & 20

• St., Aubin Sur Gaillon, France December 1 & 2

NITKE AUCTIONS Wausau, WI Phone: 715-362-6162

IRAY AUCTIONS Foley, MN Phone: 320-968-7230

• North East, MD December 16 & 17

• Harris, MN Wed., November 18, 2009 For: Complete Dispersal of Arcon Construction

• Durham, NC Wed., December 3, 2009 For: Delaware Contractors & Truck Auction

• Martinsburg, WV Sat., December 19, 2009 For: Construction Equipment

• Manassas, VA November 19

• Sacramento, CA December 1 & 2

LOWDER AUCTIONEERS Wilmington, NC Phone: 800-348-8956

MARTIN & MARTIN AUCTIONEERS, INC. Pelzer, SC Phone: 864-947-7888

•Kansas City, MO December 16

• Vancouver, BC, CA December 1

• Sat., December 5, 2009 For: Construction Equipment

GLOBAL FORCE AUCTION GROUP Thurmont, MD Phone: 301-631-0650

• Meppen, Germany November 19

• Geelong, Australia November 26

and to place your bid!

• Spartanburg, SC Thursday, December 3, 2009 For: Construction and Forestry Equipment L & L EQUIIPMENT SALES Fairview, TN Phone: 615-799-0850 ONLINE AUCTION Go to www.landlequipmentsales.com to view the complete auction schedules, inspection reports

November 20-27, 2009 ONLINE Liquidation Sale For: John Deere Agriculture, Construction and Vermeer Equipment www.rdoauctions.com RITCHASON AUCTIONEERS Lebanon, TN Phone: 800-806-3395 • Louisville, KY Sat., November 21, 2009 For: TBA • Lebanon, TN Sat., December 12, 2009 For: TBA STEFFES AUCTIONEERS Fargo, ND Phone: 701-237-9173 • West Fargo, ND Wed, December 9, 2009 For: AgIron 53 Consignment Event • Litchfield, MN

Wed, December 30, 2009 For: AgIron 21 Consignment Event www.steffesauctioneers.com

STOCK AUCTION COMPANY St. Edward, NE Phone: 800-937-3558 BIG IRON TIMED INTERNET ONLY AUCTION Go to www.stockra.com to view the complete auction schedules, inspection reports and to place your bid! • Wed., November 25, 2009 For: Construction Equipment

THE AUCTIONEERS GROUP Perth Amboy, NJ Phone: 732-776-7222 • Perth Amboy, NJ Thurs., November 17, 2009 For: Construction Equipment, Trucks & Trailers, Forklifts & More!

UTILITY AUCTIONS Des Moines, IA Phone: 515-299-6289 • Wilmington, DE Fri., December 18, 2009 For: Construction, Utility & Forestry Equipment

VOCONAUCTIONS Wilmington, DE Phone: 866-21-VOCON ONLINE AUCTION Wed, December 9, 2009 www.govocon.com

WESTERN CONSTRUCTION AUCTIONS INC Perris, CA Phone: 866-731-7760 • Perris, CA Sat., Dec. 5, 2009 – 8AM Live Online Bidding www.wca-online.com

WORLD WIDE AUCTIONEERS El Paso, TX Phone: 480-505-0070 • El Paso, TX Tues., November 24, 2009 For: Construction Equipment

YODER & FREY AUCTIONEERS, INC. Holland, OH Phone: 419-865-3990 • Lorain, OH Thurs., November 19, 2009 For: Rowland Trucking Inc. • Kissimmee, FL Feb 8 –Feb. 16, 2010 36th Annual Kissimmee, FL Auction


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 65

www.ironplanet.com

Online Auctions. Equipment located in Canada

.OVEMBER s $ECEMBER

#!4%20),,!2 #,4)&

+/"%,#/ 3+ ,#

#!4%20),,!2 4+

9!,% ',#

#!4%20),,!2 (

(934%2 ( &4

(934%2 3 &4

(934%2 3 &4

4%2%8 (2

Over 150 items located in Canada, plus additional equipment located in the United States.

9!,% '$0 /

65 Aerial Work Platforms 51 Backhoes 73 Compactors 67 Dozers 94 Excavators

106 Forklifts 105 Skid-steers 232 Trucks-On-Road And much more...

Auctions you can trust Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change.

Go to www.ironplanet.com to view the complete auction schedule, guaranteed inspection reports, and place your bids.


Page 66 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

20

th

ANNIVERSARY RY R Y

RA

1989 – 20099

Ritchason Auctioneers, inc. “Turning Machinery Into Money Since 1989” Consignments

Appraisals pp

Dewain Ritchason

Equipment q p Sales President

Teamwork Key to Success of Toll Road Construction

2 UPCOMING AUCTIONS CONSTRUCTION EQUIPMENT AUCTION

LOUISVILLE, KY SATURDAY, NOVEMBER 21st 2009 9:00 AM (EST) MISC. AT 8:00 AM Accepting Consignments thru NOVEMBER 13th To see more info and pictures, please visit our website

RA

A Case 210 CX excavator digs at the Virginia St. bridge under the Indiana Toll Road in Gary, Ind.

CONSTRUCTION EQUIPMENT AUCTION

LEBANON, TN SATURDAY, DECEMBER 12th 2009 9:00 AM (CST) MISC. AT 8:00 AM BROCHURE DEADLINE: NOVEMBER 12th Accepting Consignments thru DECEMBER 4th To see more info and pictures, please visit our website Online Bidding Provided by

www.ritchason.com www.proxibid.com/ritchason

Terms Without prior approval, a credit card authorization ($1000.00 for out of state and $5000.00 for international) will be required for all bidders. Payment will be accepted by cash, check, cashiers check, VISA, MC, Discover (3% Admin Fee), or wire transfer. A Bank Letter of Guarantee drawn on a U.S. Bank addressed to Ritchason Auctioneeers, Inc. must accompany all checks.

KY License #P1716 TN Firm #2048

Buyer’s Fee: 5% on each item under 50K ~ 4% on each item over $50K 3% on each item over $75K ~ 2% on each item over $100K

(800) 806-3395

TOLL FREE

(615) 444-5464

LOCAL

Sales Consultants: Bob Head, Head Glen Brown, Brown Henry Stephenss Un intérprete estará disponible los martes y miércoles 9am – 3pm

TOLL from page 51

“They’ve been just absolutely phenomenal as far as being able to service our needs, being there on a timely basis.” The Case of a Missing Case The Qualcom Tracs system came in handy almost instantly and saved Indiana Toll-Road Contractors a valuable piece of iron. This occurred when Mike Maloney of McCann Industries called Wiseman to ask if the machine was where it was supposed to be in November 2008. Maloney informed Wiseman that his Case equipment had moved off the Indiana job site. No one expected it to turn up in South Haven, Mich. “These machines are locked into an area based on their Qualcom GlobalTracs GPS signals,” Wiseman explained. “You can set boundaries and say, ‘If this machine goes past Broadway [Street] on the west and Tennessee [Avenue] on the east, send an alert,’ and McCann gets alerted through the system that the machine is on the move.” After receiving the call, Wiseman sent a supervisor to check on the machine, but it was nowhere to be found. “So at that point, McCann’s service manager got into the system and started tracking [the machine],” Wiseman said. “He discovered that the machine was sitting on the corner of I-94 and a side street in South Haven, Mich.” Wiseman called the South Haven police and within a couple of minutes, the machine

was located in the parking lot of the Ramada Inn. “That’s a testament to the GlobalTracs system,” Wiseman said. Unfortunately, they never caught the perpetrators. “They [perpetrators] took the machine. Obviously they had to have a lowboy to move it,” Wiseman said. “Somewhere along the line, they must have got spooked. They took it off of the lowboy and just dropped it in the parking lot. We were never able to catch them, but within three hours, we had the machine back at the job site.” Teamwork Gets It Done During the whole project, Indiana TollRoad Contractors has had to work closely with the city of Gary, Ind., with the state of Indiana, with local business such as U.S. Steel, with major utility companies and even a minor league baseball stadium. Wiseman said that Indiana Toll-Roads Contractors LLC keeps an eye on local traffic while keeping public safety in mind. “It’s been a major feat keeping everybody in the loop and safe,” Wiseman said. “The general public is our main concern.” For more information on Ferrovial Agroman, visit www.ferrovial.com. For more information on Rieth-Riley, visit www.rieth-riley.com. For more information on McCann Industries, visit www.mccannonline.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 67

BID IN PERSON:

OR ONLINE:

BIG EQUIPMENT. BETTER AUCTION. UNRESERVED PUBLIC AUCTION

KANSAS CITY

MISSOURI DECEMBER 1, 2009 ROCKRIDGE QUARRY 9 A.M. LOCAL TIME

I-435 & EAST 87TH STREET KANSAS CITY, MO

BID IN PERSON:

Rockridge Quarry I-435 & East 87th Street Kansas City, Missouri

OR ONLINE: www.catauctions.com/2009kc

PRELIMINARY* EQUIPMENT LIST Articulated Trucks (2) Hydraulic Hammers (7) Hydraulic Excavators (10) Mini Excavators (2) Man Lifts (2) Boom Lifts (6) Motor Graders (3) Motor Scrapers (5)

Telehandlers (9) Track-Type Loaders (4) Track-Type Tractors (5) Backhoe Loaders (4) Compactors (7) Water Trucks (4) Light Plants (5)

*Equipment subject to change

Search the full equipment listing and register to bid online at:

www.catauctions.com/2009kc Follow the new leader.TM www.catauctions.com

©2009 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

CAT AUCTION SERVICES 8050 County Road 101 East Shakopee, MN 55379 866.750.9432 info@catauctions.com


Page 68 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Racine…

One Complete Unloads Iron With Alex Lyon & Son in Wis.

Some well-traveled auction goers (L-R) are Bennie Helland, owner of Newark Truck & Tractor; Rolf Helland, president of Illinois Truck & Equipment; and Gary Roberts, corporate used equipment manager of Roland Machinery Co.

Mark Pitzka of Pitzka Services inspects this Case 584C forklift.

A

lex Lyon & Son hosted an auction Oct. 30 at the company’s Racine, Wis., location. The event featured a liquidation for One Complete Construction Company plus the auctioning off of aerials, forklifts, trucks, dump trucks, trailers and support.

Jack Lyon calls for more bids on the skid steers at the Racine, Wis., sale.

George Vingan of Scott Ward Underground Contractors checks the controls of this Bobcat 763 skid steer.

John (L) and Randy Vassh, both of Vassh Excavating in Racine, Wis., look over this Komatsu WB 146 backhoe.

Scott Ward, president of Scott Ward Underground Contractors, looks over some of the skid steers.

Chad Ketelsen, Alex Lyon & Son’s Midwest vice president, calls for more bids on the trucks at the auction in Racine, Wis.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 69

Hirschmann Unveils iVISOR Mentor EI65 for Mobile Cranes Hirschmann Automation and Control either an SKM running line tensiometer or a (PAT), Chambersburg, Pa., has introduced dead end force transducer. the iVISOR mentor EI65 indicator system The system also was designed as an for mobile cranes. upgrade to existing EI65 systems that are The iVISOR mentor EI65 provides a con- currently in the field to the latest technology. tinuous display of actual load and allowable load, boom angle, boom length, radius, parts of line, and alerts the operator to an impending two block condition. All set up and calibration is done through the userfriendly console. The operator can preset limits for all geometric and load variables with an audible and visual warning when these limits are reached. This function provides the operator additional information while operating in areas of limited headroom or proximity to buildings, electric transmission lines, etc. The large backlit display incorporates BestView — Adaptive display control for optimal readabil- The iVISOR mentor EI65 provides a continuous ity. display of actual load and allowable load, boom The iVISOR mentor EI65 incor- angle, boom length, radius, parts of line, and porates CANbus technology for all alerts the operator to an impending two block sensors. The load is measured with condition.

Absolute Auction Wed., Dec. 9, 2009 – 9:00 AM Waynesboro, Virginia (Former Assets of Ennstone, Inc. and Off-Lease Returns) Rubber Tired Loaders (2) `07 KOMATSU WA500, s/n A92201 (1,402 Original Hours) and s/n A92172 (3,124 Original Hours), e/w coal bucket, high lift arrangement, and EROPS • `05 VOLVO L220E, s/n L220EV3371 • `06 VOLVO L90E, s/n L90EV67819

Hydraulic Excavators `06 KOMATSU PC300LC-7, s/n A87027, e/w 2005 Genesis GXP500R rotating shear, s/n 500437R (Excavator and Shear Will Be Offered Separately and As An Entirety) • `05 DOOSAN Solar 255LC-V, s/n 40001354 • `01 CAT 330BL, s/n 3YR01327 • `01 IHI 45NX Mini Excavator, s/n WG000597

Motor Scrapers (8) `04 CAT 615C-II Elevating Motor Scrapers, s/n 9XG01723, s/n 9XG01724, s/n 9XG01725, s/n 9XG01726, s/n 9XG01727, s/n 9XG01728, s/n 9XG01729, s/n 9XG01730

End Dumps

`98 CAT D400E, 6x6 Articulated, s/n 2YR00885 • `01 CAT D350E Series II, s/n 2XW00375

Directional Drill and Mixing System `07 VERMEER D100x120 Series II Horizontal Directional Drill, s/n 1VRZ3304471000154, e/w 12,000 ft. lb. Torque, 100,000# pullback, 200 GPM on-board drilling fluid pump (1,899 Hours) • `98 SURFACE 2,000 Gallon Mixing System

Portable Screen Plant and Tub Grinder `05 POWERSCREEN Commander 1400 Rinser, s/n 13501954, e/w 6’x13’ grizzly, hyd tilt with 44”x14’ discharge belt, 42”x44’ conveyor, 5’x12’ wet screen, (5) wash bars • `99 MORBARK 1200XL Portable Tub Grinder, s/n 567-469, Cat 3412E, 650HP diesel engine and Twin Disc PTO, e/w Morlift 350 knuckleboom loader with Tarantula grapple, 36”x28’ hyd folding discharge conveyor with magnetized end pulley

Scrap Baler/Logger `06 SIERRA S5250G Roll-Off Scrap Baler/Logger, s/n 03-116-06, e/w M8500-S knuckleboom loader, 4tine rotating orange peel grapple, 22’ boom reach, 17’4” scrap tub with 160 ton main compression cylinder force, 210 ton side compression force, and 1,100# average bale/log weight

All Terrain Crane, Boom Truck, and Forklift

`93 LINK-BELT ATC822, 22 Ton, s/n 71-I3-0142 • `03 INT’L/TEREX 12 Ton Boom Truck, Terex BT2463 mtd on Int’l 7400 S/A • `07 DAEWOO G25E, s/n CXO3540

Concrete Pump Truck, Power Rake, and Bulk Trailer Live On-Line Bidding

om www.iraymn.c

On Site – Jct Hwys 95 & 25 - Foley, MN Partial List – Accepting until Noon on Saturday, Nov. 28th

Excavators: Cat E110B, Hitachi 300 Dozers: D6D LGP, Cat D5 Loaders: ‘88 Cat IT-18B Wheel, Cat 955K Track Skid Steers: ‘05 JD 320, ‘00 Bobcat 863G Graders: ‘95 Champion 730A Ser IIII, JD 670A, Cat 14E Scrapers: Terex TS46B, Int’l E200B Lifts: ‘05 Cat P6000, Clark 0300 50, Int’l 4500B, ‘98 Mark Aerial 80CRTR-D Concrete: Gomaco GT3600, Hopper, 10) Form Baskets, Culvert - Many Sizes Dumps: ‘98 Mack DM6905 Tri, ‘97 Ford L9000 Tri, ‘92 Ford L9000, ‘90 Ford L8000, ‘86 Ford, ‘82 Int’l 2574 Tri, ‘81 Mack RD6855 Tdm Semis: ‘08 Pete 388 Tdm, 2) ‘07 Pete 379 Sleeper Tdm, ‘02 F/L Columbia 120 Tdm, ‘00 Int’l 9400 Sleeper Tdm, ‘99 Western Star 4800 Tdm, ‘99 KW T800 Tdm, ‘98 FLD Condo Sleeper Tdm, ‘95 F/L DS Tri, 2) ‘94, ‘93 & ‘92 Int’l 8300 Tdm, ‘93 KW T600 Tdm, ‘89 Int’l 2674, ‘88 Int’l F2275 Tdm Trucks: ‘08 F350 XL Super Duty, ‘05 F450, ‘00 Mack TB80 Conveyor, ‘99 Chev 3500HD, ‘98 Fassi Boom F190.22 Tri, ‘96 Int’l 4700 Box Van, ‘94 Chev Kodiak, ‘90 Int’l 4700, ‘90 Ram, ‘89 Mack Propane, ‘79 Ford LT800 Boom Tdm, ‘77 Mack Crane, Big John 90C Tree Transplanter Trailers-Dump: ‘00 Mac End Tdm, ‘00 & ‘99 Chagnon End Tdm, Steco End Tdm Trlrs-Flat: 2) ‘07 Fontaine Infinity AX Tdm, ‘05 Fontaine Lowboy Detach Tdm, ‘02 H & S SS16 Tdm, ‘00 Fontaine TH55 Detach Tri, ‘94 Dynaweld Tdm, ‘93 Fontaine Drop Deck Tdm, ‘91 Dorsey Tdm, ‘90 Witzco Detach, ‘88 Load King Tri Detach, ‘86 Value Detach Tri, Talbert Detach Tdm, Trail King Tdm Trlrs-Enc: ‘04 Pace Summit Tdm, ‘00 Haulmark Tdm Snowmobile, ‘80 Lufken Tractors: Cat Challenger 75, Steiger KR 1280 Cougar Aggregate: Pioneer 414 Wash Plant, Power Screen Mark II, Swift Conveyor 70’ x 24”, Hmde Transfer Conveyor 20’ x 24”, 2) Transfer Conveyors, Screen Box, Paddle Type Pulley, Tail/Head Pulley, 4) Tail Pullies, 4) Head Pullies, Conveyor Belting Ve h i c l e s : ‘08 Silverado Crew Cab, ‘07 Silverado Ext Cab Z85, ‘07 Silverado 2500 Ext Cab, ‘05 Silverado Z71, ‘04 Dodge 3/4 Ton Crew Cab, ‘04 Silverado Ext Cab, ‘03, ‘00, 2) ‘98 Silverado Ext 4x4, ‘99 GMC Sierra, ‘99 F350 XLT Super Duty, ‘99 Silverado 2500, ‘99 Chev 2500, ‘98 Escort SE Busses: ‘99 Ford E450 Super Duty Goshen Coach, 2)GMC 3500 Recreational: ‘88 Chev Fleetwood Pace Arrow, ‘79 Mini Winnie Plus: Attachments, Generators, Storage, Sweepers, Shop, Tools, Tires & Much More!

CALL TO CONSIGN OR SCHEDULE AN AUCTION (877) OR (320) 968-7230 See It • Bid on It • Buy It • www.iraymn.com

Col. Raymond S. Henry – WI Lic.#2490-52; MN Lic.#05-09-003 Real Estate Auctioneer & GPPA Certified Equipment Appraiser

`03 PUMPSTAR ZF5-42/PS220, s/n 777192, e/w 42 meter, 5-section Z-fold concrete placing boom, umbilical remote control, wash down pump and hose reel. Mtd `03 Mack MR688S, 8x4 Carrier (No Boom Pipe) • `07 SOMERO Power Rake, s/n 40232-0107 • `05 HEIL T800 Cement Bulk Trailer

(19) Rear Discharge Concrete Mixer Trucks (12) `06 MACK CV713 Granite Tri-Axle Mixer Trucks, Mack A1-375A, 375HP dsl, Allison automatic, e/w CBMW 11 cy hyd mixer, 150 gal pressurized water tank • (2) `04 KENWORTH T800 T/A Mixer Trucks, Cat C13 Acert, 380HP dsl engine and Allison automatic, e/w Kimble K2000 10.5 cy hyd mixer, 120 gal pressurized water tank • (2) `04 MACK CV713 Granite T/A, Mack AMI-400 dsl and Allison automatic, e/w McNeilus 10.5 cubic yard hyd mixers • (3) `04 MACK EV713 Granite T/A, Mack AMI-370 dsl and Mack TM309M, 9 spd transmission, e/w McNeilus 10.5 cy hyd mixers

Front Discharge Mixers Trucks (5) `06 TEREX/ADVANCE, 6x10, C13 Acert dsl and Allison trans, e/w 10.5 cy hyd mixer, 120 gal pressurized water tank

Please Call (800) 233-6898 or Email sales@hunyady.com For Complete Brochure And Additional Details!

www.hunyady.com Virginia Auction License No.: 2908 000496 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.


Page 70 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

EVERYTHING SELLS TO THE HIGHEST BIDDER

Auction Update KRAKOW, POLAND +31.168.392.200 HOUSTON, TX, USA 713.455.5200 MEPPEN, GERMANY +49.54.198.1330 MANASSAS, VA, USA 571.248.6221 MONCOFA, SPAIN +34.964.580.559 PHOENIX, AZ, USA 602.269.5631 ISTANBUL, TURKEY +90.216.366.0300 BRISBANE, AUSTRALIA +61.7.3382.4444 GRANDE PRAIRIE, AB, CAN 780.538.1100 MOERDIJK, THE NETHERLANDS +31.168.392200 GEELONG, AUSTRALIA +61.3.5245.3333 TRURO, NS, CAN 902.895.3700 VANCOUVER, BC, CAN 604.580.0166 SACRAMENTO, CA, USA 530.724.3900 ST. AUBIN SUR GAILLON, FRANCE +33.2.32778610 SASKATOON, SK CAN 306.933.9333 FORT WORTH, TX, USA 817.237.6544 MONTREAL, QC, CAN 450.464.2888 CAORSO, ITALY +39.0523.818801 TORONTO, ON, CAN 800.357.0659 POLOTITLAN, MEXICO +52.427.266.0909 STATESVILLE, NC, USA 704.873.6633

*

*

* *

NOV 17 NOV 17 - 19 NOV 19 NOV 19 NOV 19 & 20 NOV 20 NOV 21 NOV 24 NOV 24 & 25 NOV 25 - 27 NOV 26 DEC 1 DEC 1 DEC 1 & 2 DEC 1 DEC 2 DEC 2 - 4 DEC 3 & 4 DEC 3 & 4 DEC 7 & 8 DEC 8 DEC 8

44

Upcoming Unreserved Public Auctions

DENVER, CO, USA 970.535.6700 COLUMBUS, OH, USA 937.568.9500 JACKSON, MS, USA 601.939.2258 EDMONTON, AB, CAN 780.955.2486 CHICAGO, IL, USA 815.941.6400 OLYMPIA, WA, USA 360.956.1500 FARMINGTON, NM, USA 505.836.0738 DUBAI, UNITED ARAB EMIRATES +971.4.8120600 PITTSBURGH, PA, USA 724.947.7240 NASHVILLE, TN, USA 615.453.4549 MINNEAPOLIS, MN, USA 507.774.5050 LOS ANGELES, CA, USA 951.940.9441 KANSAS CITY, MO, USA 816.633.4096 NORTH EAST, MD, USA 410.287.4330 PRINCE GEORGE, BC, CAN 250.963.8491 ST LOUIS, MO, USA 636.931.0090 NARITA, JAPAN +61.7.3382.4444 PANAMA CITY, PANAMA 52.427.266.0909 LAS VEGAS, NV, USA 702.644.2468 TORREON, MEXICO +52.427.266.0909 ORLANDO, FL, USA 863.420.9919 TORREON, MEXICO +52.871.731.7424

* * *

*

DEC 8 DEC 9 DEC 10 DEC 9 & 10 DEC 10 DEC 10 & 11 DEC 14 DEC 14 - 16 DEC 14 DEC 15 DEC 15 DEC 15 & 16 DEC 16 DEC 16 & 17 DEC 17 DEC 18 JAN 27, 2010 FEB 2, 2010 FEB 5, 2010 FEB 10, 2010 FEB 15 - 20, 2010 FEB, 2010

*NOTE NEW DATE - Dates are subject to change

Can't make it to the auction? Place your bids over the Internet at rbauction.com. Submit proxy bids in advance of any auction, or place real-time bids through our live auction broadcasts. Click rbauctionBid on the Ritchie Bros. web site for details.

CALL FOR A FREE BROCHURE

800.211.3983 For information on upcoming auctions, visit our web site at rbauction.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 14, 2009 • Page 71

ADVERTISER INDEX A E D .............................................................................................18 ALEX PARIS CONTRACTING CO INC ..........................................9 ALLU GROUP ...............................................................................22 AMERICAN STATE EQUIPMENT .................................................11 ASPEN EQUIPMENT....................................................................59 BARAGAINS.............................................................................61,63 BODINE MFG................................................................................34 BRANDEIS ....................................................................................28 BUDROVICH INC............................................................................6 CAT AUCTION SERVICES KANSAS CITY ........................................................................67 CEG SCALE MODELS..................................................................40 CHAMPION MOTOR GRADERS..................................................44 CLASSIFIEDS ..........................................................................62,63 CONSTRUCTION EQUIPMENT GUIDE FOR ALL YOUR CONTRACTING NEEDS .............................52 CONSTRUCTIONEQUIPMENTGUIDE.COM .........................35 CEG WANTED........................................................................60 DIERZEN TRAILERS CO..............................................................59 DON KOONTZ EQUIPMENT ........................................................28 DOOSAN PORTABLE POWER ....................................................43 DURATECH...................................................................................32 DYNAPAC .....................................................................................48 EAGER BEAVER TRAILERS........................................................23 EQUIPMENT CORP OF AMERICA ..............................................28 FABCO EQUIPMENT INC...............................................................7 FARM-RITE EQUIPMENT INC .....................................................13 FCC EQUIPMENT FINANCIAL.....................................................12 FELLING TRAILERS .....................................................................58 FINKBINER EQUIPMENT CO.......................................................11 GARY CARLSON EQUIPMENT ...................................................15 GROSSMAN CHEVROLET ..........................................................55 HARTS TRACTOR & EQUIPMENT CO........................................10 HH FABRICATION ........................................................................27 HOWELL TRACTOR & EQUIPMENT CO................................39,72 HULLS 151 IMPLEMENT INC ......................................................25 HUNYADY AUCTION CO WAYNESBORO VA.................................................................69 HYDRAULICIRCUIT TECHNOLOGY............................................19 ILLINOIS TRUCK & EQUIPMENT ..................................................3 IRAY AUCTION FOLEY MN..............................................................................69 IROCK CRUSHERS......................................................................34

IRON PLANET ONLINE AUCTION..................................................................65 JOHN DEERE ...............................................................................45 KAWASAKI CONSTRUCTION MACHINERY ...............................49 KOMATSU AMERICA CORP ........................................................46 KUBOTA ........................................................................................47 LIEBHERR.....................................................................................26 LUBY EQUIPMENT SERVICES....................................................25 MCCANN INDUSTRIES INC...........................................................6 MID COUNTRY MACHINERY.......................................................36 MIDLAND EQUIPMENT CO .........................................................59 MUSTANG MFG............................................................................41 NPK CONSTRUCTION EQUIPMENT INC ..................................38 PALADIN HEAVY CONSTRUCTION ............................................51 PATTEN TRACTOR & EQUIPMENT CO ........................................2 POWERSCREEN MW DEALER ...................................................31 RDO EQUIPMENT/SCHARBER EQUIPMENT.............................21 REMU SCREENING TECHNOLOGY ...........................................34 RITCHASON AUCTIONEERS LOUISVILLE KY / LEBANON TN ...........................................66 RITCHIE BROS. AUCTIONEERS AUCTION UPDATE ................................................................70 ROAD MACHINERY & SUPPLIES CO...........................................8 ROCKLAND...................................................................................17 ROLAND MACHINERY INC............................................................5 RUDD EQUIPMENT CO ...............................................................17 SANDVIK MINING & CONSTRUCTION .......................................33 STAR EQUIPMENT LTD .................................................................6 SUBURBAN CHEVROLET ...........................................................57 TOPCON POSITIONING SYSTEMS ............................................27 TOWMASTER INC.......................................................................56 WEST SIDE TRACTOR SALES....................................................37 WHAYNE SUPPLY CO..................................................................39 WORLDWIDE EQUIPMENT LLC..................................................54 ZM INDUSTRIES ..........................................................................22

OHIO STATE SUPPLEMENT BOBCAT ENTERPRISES................................................................5 GIBSON MACHINERY LLC ............................................................7 JD EQUIPMENT INC ......................................................................5 NORTRAX .......................................................................................8 THE MCLEAN CO...........................................................................3

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.


Page 72 • November 14, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.