2015 Master Builders Queensland BuildIT Directory

S U S TA I N A B L E B U I L D I N G 25 CM

P RO F E S S I O N A L S E R V I C E S

LIGHTING AN D E L EC T R I C

WIN DOWS AN D AW N I N G S SCAFFOLDING

RO O F I N G

CEMENT AN D CONC RETE

2015/16

H A R DWA R E S U P P L I E RS

FENCING

PLACING STARTER BARS IN CONCRETE FOOTINGS HAS ALWAYS BEEN A VERY TIME CONSUMING JOB Having to tie-wire each bar to the mesh, then tie-wiring horizontal steel lengths to hold them together. Then avoiding all the props, that are outside the trench holding the starters in place, with your wheel barrow or concrete pump lines.

Entire lengths of starter bars falling over from props being hit is definitely not good, especially when concrete is pumping.

NOT ANYMORE! WITH

QUICKFIT STARTER BAR HOLDERS YOUR JOB WILL ALWAYS RUN SMOOTHLY, SAVING YOU TIME AND MONEY – THAT IS WHAT IT’S ALL ABOUT • Simply slide the QUICKFIT down the starter bar and rest it in the cradle • A zip tie connects the starter to the cradle for extra support • With the QUICKFIT and starter bar together, it simply clips to the mesh • This system takes approximately 1 minute for each starter bar placement • With a simple measurement on the steel to locate each starter bar, you are guaranteed perfect spacing and alignment.

JOB DONE. DESIGNED, DEVELOPED AND MADE IN AUSTRALIA

QUICKFITSTARTERBAR.COM.AU

1300 500 337

2015/16 Contents

4 ........... Master Builders key information Key contacts Office locations 5 ........... Master Builders membership 7 ........... Product information index Building product features 33 ......... Product directory index Building product directory

Published by

Telephone: 1800 222 757 Fax: 1800 063 151 Email: publications@crowtherblayne.com.au Website: www.crowtherblayne.com.au Business Development Manager: Trish Riley Sales Manager: Craig Flenley Production Coordinators: Brooke Travers Design Team: Byron Bailey, Andrew Crabb, Michelle Triana Editor: Sam Regan Printed by: Newstyle Printing Distributed by: Adelaide Business Bureau

Š This publication is copyright. No part of it may be reproduced, stored in a retrieval system or transmitted in any form or by any means, including electronic, mechanical, photocopy, recording or otherwise without the prior permission of Crowther-Blayne and Associates Pty Ltd. Disclaimer: Readers are advised that the publisher cannot be held responsible for the accuracy of statements made in advertising and editorial, nor the quality of goods or services advertised.

Opinions expressed throughout the publication are the contributors own and do not necessarily reflect the views of the publisher. While every reasonable effort has been taken to ensure the accuracy of the information contained in this publication, the publisher takes no responsibility for those relying on the information. The publisher disclaims all responsibility for any loss or damage suffered by readers or third parties in connection with the information contained in this publication.

BuildIT QLD EDITION 2015/16 1

LIGHTING SHOWROOMS

ESTABLISHED IN 1990, IDEAL HAS 32 BRANCH LOCATIONS ACROSS QUEENSLAND WITH 26 LIGHTING SHOWROOMS. WE CAN CUSTOMISE AND PROVIDE A PACKAGE TO SUIT YOUR BUDGET & BUSINESS NEEDS. HOUSE PLAN CONSULTS I HOUSE LOT PACKAGES I BULK ORDER DEALS I DISPLAY HOME PACKAGE DEALS I DECORATIVE LIGHTING OPTIONS I DECORATIVE POWERPOINT & SWITCHES I FANS & AIR MOVEMENT I LED LIGHTING I ENERGY EFFICIENT OPTIONS

Check out www.idealelectrical.com for your nearest branch or contact Jason Ah-Wong to discuss how we can service your business requirements.

M 0409 466 298 I E jason@idealelectrical.com

DOWNLOAD A P P T O D AY !

DEFECTS Waterproof with Wet-seal to REDUCE YOUR RISK

Fully reinforced membrane system providing strength & durability

All systems certified by CSIRO & appraised by BRANZ Non-hazardous & high performing - low VOC materials for a safer working environment

Wet-seal’s Australian Made Enviro-coatTM Internal System waterproofs showers, bathrooms, powder rooms, laundries & WC’s.

LL STATES

O AU ALIA S TR

Franchisees are fully licenced waterproofers & hold Cert

S

A IN

F

EXCLUSIVELY by our highly trained Franchisees & their Applicators

FRANCHIS EE

Systems developed in-house by Wet-seal for use

III in Waterproofing in conjunction with TAFE

Technical bulletins in place with a range of adhesive manufacturers

Franchisees across QLD - we can provide one rate sheet & central ordering for all your projects

Insurance backed 7 year product & workmanship warranty

Wet-seal’s Australian Made Enviro-coatTM External Systems waterproofs decks, balconies, & retaining walls.

We also specialise in external joint sealing of brickwork.

30 years of industry experience - tried & tested systems

GET US ON YOUR TEAM! Call Anthony on

1800 025 081 www.wet-seal.com.au

azullo@wet-seal.ws

Wet-seal Mgmt P/L - QBCC Act Lic. No. 1067026

BRANZ Appraised Appraisal No.655 [2013] Appraisal No.788 [2012]

Wet-seal BuildIT QLD EDITION 2015/16 3

R

Master Builders key contacts & office locations For all general enquiries, phone Master Builders on 1300 30 50 10. Or you can contact our key services using the details below.

KEY CONTACTS Accounts

Health, safety & environment

Phone & internet plans

3225 6429 accounts@masterbuilders.asn.au

3225 6404 whs@masterbuilders.asn.au

1300 88 13 72 phones@masterbuilders.asn.au

Building & planning

Housing & Construction Awards

Training & licensing

3225 6419 technical@masterbuilders.asn.au

3225 6515 awards@masterbuilders.asn.au

1300 13 60 02 training@masterbuilders.asn.au licensing@masterbuilders.asn.au

Contracts & disputes

Insurance

3225 6419 contracts@masterbuilders.asn.au disputes@masterbuilders.asn.au

1300 13 13 26 insurance@masterbuilders.asn.au

Membership Employment & wages 3225 6407 workplacerelations@masterbuilders.asn.au

3225 6414 membership@masterbuilders.asn.au

OFFICE LOCATIONS

To find out more call Master Builders on 4 BuildIT QLD EDITION 2015/16

Master Builders membership TAKE YOUR MEMBERSHIP TO NEW LEVELS As a member of Master Builders you have access to a range of great benefits and services, right at your fingertips.

Make the most of your membership with these top 10 tips: 1. Promote yourself as a Master Builder. The Master Builders brand is well known and respected in our industry, so aligning your business with us will make you stand out from the crowd. Our member logo is readily available to you, so make the most of it by using it in your promotional material, including your business cards, letterhead, signage and advertising. Why not add a link from your website to ours? It can enhance your chances of being found online. Using our logo is a great way of telling your clients you are proud to be a Master Builder.

2. Resolve disputes with confidence. Don’t face a client dispute alone – we are here to help. Dispute resolution is one of Master Builders’ core services, and we have a great team of industry experts on hand to help you manage disputes that arise in your business.

3. Up skill through our quality training courses. Enrol in a course tailored to your needs as a participant in the building and construction industry. Master Builders offers a wide range of high-quality training courses and as a member you will receive significant savings on the cost of these services.

4. Manage your jobs with Buildcentre. Buildcentre is Master Builders’ web-based job management system available exclusively to members. For a small monthly subscription, the system allows builders and tradies to work through the end-to-end job process. Sign up for a free 30-day trial or learn more at www.buildcentre.com.au

5. Get your head around employment and wages. Ensuring you have the latest advice and information on wages and allowances, union demands, right of entry, WorkCover claims and unfair dismissals, is important in running your business. Master Builders’ expert staff are on hand to give you this advice at no extra cost.

6. Access member-only information on Master Builders’ website. Need industry information at the touch of a button? Master Builders’ website is the number-one resource for all the Queensland building and construction industry information you need. It is also the best place to go to register for our training courses and events, purchase products from our eShop, and register or update your listing on the Find a Master Builder search tool.

7. Become an award-winning builder. The Master Builders Housing & Construction Awards are Queensland’s most prestigious and highly coveted building awards. With entries only open to members, they give you the chance to showcase your quality workmanship and compete against the best of the best. Plus, the publicity and acclaim you gain from winning an award is unrivalled.

8. Get social and get involved. Master Builders’ annual events’ calendar features a range of social and informative events, offering great opportunities to meet and mingle with other members and industry colleagues. From golf days, industry breakfasts and our annual Roadshow and Christmas Smoko, to our prestigious Housing & Construction Award ceremonies, there is something for every kind of member, so why not get involved now?

9. Stay in the know about industry issues and updates. As a Master Builders member we want to help you as much as we can to stay on-top of all issues that affect your business. Keep an eye out for our regular communication via email, memberonly magazine and invitations to our industry events.

10. Use the added benefits to your advantage. Flash your Master Builders membership card and receive added benefits when it comes to your phone and internet plan with Telstra, corporate health cover with Medibank, fuel cards with Caltex and great discounts with Beaurepaires, Kennards Hire, Totally Workwear and Trailers 2000. All of these added member benefits can help you operate a more profitable business.

Take the benefits of being a Master Builders member to new heights. It is up to you to use it to the full potential.

1300 30 50 10 www.masterbuilders.asn.au BuildIT QLD EDITION 2015/16 5

SWITCH

N

WITH ORIGIN We’ll get you connected Building Industry Team – with over 12 years of experience Dedicated local connections team Connect Assist – our building industry connections portal

Call 1300 674 446 and enter 353 newconnections@originenergy.com.au

8704.Jun15.QLD

Available VIC, NSW, ACT, SE QLD and SA

Origin Energy Retail Limited | ABN 22 078 868 425 | Origin Energy (Vic) Pty Limited | ABN 11 086 013 283 | Origin Energy Electricity Limited ABN 33 071 052 287 | Origin Energy LPG Limited | ABN 77 000 508 369 | Sun Retail Pty Limited | ABN 97 078 848 549 | GPO Box 1199 Adelaide SA 5001 | Telephone 13 24 61 | Facsimile 1800 132 463 | originenergy.com.au

2015/16

Product information index 08 .............. Apprentice training 10............... Asbestos removal 52 .............. Audio visual 12 .............. Building certification & Consulting services 13 .............. Building products 14............... Business assistance 17............... Cladding 18 .............. Commercial tubing products 20 .............. Frames & Trusses 21............... Kitchen & Bathrooms 22 .............. Surveying tools 23 .............. Tile & Stone 24-26 ......... Transport 28-29, 31 ... Waterproofing

BuildIT QLD EDITION 2015/16 7

BLENDED OFFSITE COLLEGE ONSITE FLEXIBLE TRAINING WORKS BEST!

Biga Training has developed a training model that breaks away from the traditional 4 week block. Biga training will only book apprentices for a week at a time. If they can complete the subjects quicker in that week they will be returned to work or they will be given more subjects. The blended model allows for one on one time with a trainer to pick up on the finer detail and those trade tricks. Our trainers have many years of experience within their trades in Queensland conditions. The blended model also allows for the apprentice to attend college if work is slow or on wet days.

ONSITE PORTION

Biga Training is able to deliver training and assessment to apprentices on site. The apprentice will work through task based work books, completing both theory and practical components onsite. The apprentice will need to capture pictures or video of them completing practical tasks relevant to the subject; they will also be required to keep a diary of work performed that is verified by the employer.

Your trainer will be in regular contact, with both the employer and the apprentice, to see how the apprentice is progressing and will visit each apprentice at regular intervals throughout the year. All apprentices enrolled into this model of delivery will also be required to attend college to complete subjects that they are not exposed to onsite, unless they can demonstrate otherwise.

BENEFITS TO EMPLOYERS/APPRENTICES

• Early return to work if subjects completed quicker • Ability send apprentice to training if work is slow or wet days • Employer demonstrates meeting Award requirements by releasing apprentice to training • Apprentice does not incur further travel cost, we have campuses at Brendale, Salisbury and regional locations • Apprentices learn extra responsibilities of completing their work on time

WHY CHOOSE BIGA TRAINING RTO#30822 • Biga prides itself on quality training for industry that leads to better skilled tradespeople on the jobsite.

• Biga promotes high practical activity components to reinforce skills when completing college subjects.

• Biga training is a not for profit RTO guided by Directors from Industry; QMBA, BERT, CFMEU and AWCI.

• Apprentice is able to learn, practise and learn from mistakes at college not on the clients job The benefit of this model of training for both the apprentice and employer is it allows for apprentices to complete subjects both onsite and at college. The flexible training allows for tailored training plans to match what the apprentice is doing onsite.

Trades • • • • •

Carpentry Painting and Decorating Wall and Floor Tiling Brick and Blocklaying Wall and Ceiling Lining

Campuses

• • • • • •

Brendale Salisbury Bundaberg Rockhampton Townsville Mackay

ASBESTOS

ASBESTOS: THE FACTS Asbestos in construction has been phased-out since 1989 and completely banned in 2003.

However, builders still face significant risk of doing work that may disturb asbestos containing materials (ACMs) and contract a deadly disease.

Prior to the mid‐1980s, Australia has historically been one of the world’s highest users per capita of asbestos.

This resulted in extensive use of asbestos throughout the construction industry in thousands of different products including asbestos cement roofs, walls and ceilings, asbestos cement pipes, asbestos containing electrical switchboards and asbestos vinyl flooring.

The peak period for using ACMs during construction of domestic dwellings in Australia was between 1945 and 1987. However, construction and maintenance workers are still likely to be involved in work tasks that may disturb ACMs.

Prevention is straight-forward Preventing asbestos exposure in this day should be a relatively straight-forward task given there are only three basic principles to adhere to. Recognising the hazard, evaluating the risk and implementing controls to prevent exposure.

It is disappointing that despite the numerous public asbestos awareness campaigns, and all the information available through the various media portals, people are still exposed to asbestos fibres in circumstances that are totally preventable.

Asbestos is not an ‘old persons’s disease’

Asbestos cement sheeting incorrectly disposed of at a landfill site

Firstly, asbestos is viewed as an old person’s disease. Seeing a young apprentice die from electrocution in the prime of their life, is viewed as far more tragic than an asbestos sufferer in their retirement.

The widely held attitude is why should someone spend precious dollars and resources when at best asbestos sufferers only have a few years to live? The latest mesothelioma registry reported 25 new cases of mesothelioma under the age of 55 during 2012. This trend is likely to increase.

Secondly, the long latency period for asbestos disease (15 to 40 years from exposure) is a significant roadblock for us to communicate the dangers associated with asbestos. Most people have the attitude that it won’t happen to me.

Hazardous when inhaled Asbestos fibres become hazardous when airborne and inhaled. The inhalation of asbestos fibres is known to be associated with a number of diseases, including asbestosis, lung cancer and mesothelioma.

While there is a strong-dose response relationship between asbestos exposure and disease, there is no safe level of asbestos fibre.

According to the World Health Organisation, at least 90,000 people worldwide die each year from asbestos-related lung cancer, mesothelioma and asbestosis resulting from workplace exposure.

Aussies have highest number of cases Australia has one of the highest incidences of mesothelioma in the world. Overall, the incidence of mesothelioma in Australia has increased since 1982.

The latest Australian mesothelioma report issued in 2013 reports in excess of 600 notifications of people newly diagnosed with mesothelioma between the 1st of January and 31st of December, 2012.

To put this into context, this equates to 12 new diagnosed cases of mesothelioma per week over a 12-month period. There is no cure for mesothelioma and progression of the disease is rapid. Average life expectancy from diagnosis to death is just nine months.

Asbestos cement sheeting left behind following poor asbestos removal practices

BuildIT QLD EDITION 2015/16 9

A S B E S T O S R E M O VA L

WE DON’T JUST REMOVE YOUR ASBESTOS PROBLEM, WE ELIMINATE IT Asbestos removal can be a challenging and overwhelming task that must be handled in a professional and efficient manner.

Advanced Asbestos Removal Qld Pty Ltd (AARQ), is committed to quality service and safety management in the commercial, civil, mining and domestic arenas.

AARQ is a fully licensed and insured asbestos removal company so you can be assured that your interests are being protected throughout the entire process to ensure you and your property are safe.

AARQ considers safety first with up-to-date asbestos equipment and training. AARQ staff are trained in the removal, transportation and disposal of bonded and friable asbestos. All employees work in accordance with Queensland’s strict asbestos regulations and hold current ISO accreditations to ensure all processes are maintained and followed, for our client’s peace of mind.

We are bonded and friable specialists servicing all areas of Queensland. Our work within the mining sector demonstrates our capacity to maintain compliance abreast of changing industry.

AARQ is engaged in civil infrastructure work and has an ongoing relationship with local providers in the upgrading of the Bruce Highway and local road networks.

Our experienced team can help you with all of your asbestos removal needs. No matter what sectors your asbestos removal is in we can help you assess your requirements, plan and carry out your removal in accordance with the Code of Practice.

For more information contact: Phone: 0410 787 005 Email: aarqasbestos@hotmail.com

ADVANCED ASBESTOS REMOVAL QUEENSLAND Servicing Mackay to Bowen Basin Abestos Testing • Fully Licensed & Insured • Commercial & Domestic • Clearance Inspections • Risk Management Plans Environmental Monitoring • Asbestos Management Plans EPA Licensed Vehicles • Licensed for A & B Class Removal • Vinyl Floors • Sheds & Garages • Roof Sheeting • Bathrooms • Kitchens • Laundry • Eaves • Fencing • Internal/External

We don’t just remove your asbestos problem, we eliminate it.

Assess - Remove - Remediate

Call us today for a free quote: 0410 787 005 aarqasbestos@hotmail.com

24 Hr Emergency Service

10 BuildIT QLD EDITION 2015/16

ASBESTOS

False information passed to the next generation Every week, people working in the construction industry tell me they have drilled, cut and worked with asbestos for years and feel fine. These attitudes pass onto the next generation of apprentices.

The highest age-incidence rates for contracting an asbestos related disease are in the age groups, ranging from 65 years to 84 years. These are the years when people should enjoy the fruits of their hard-working careers.

Unfortunately, these people do not have the time and physical health to re-educate those in the workforce that they have misinformed others about the hazards of asbestos.

It was interesting reading a study by the Australian Capital Territory Asbestos Task Force conducted in 2005. It involved investigating behaviours of tradespeople in the ACT regarding asbestos in the workplace.

The majority of participants thought they were able to identify many or most ACMs based on their own experience. Too often we see inadvertent exposure to asbestos within the construction industry as a result of person’s not referring to asbestos registers or not testing suspected ACMs at NATA accredited laboratories.

Lab testing is the only way to know for sure In order to dispel myths and theories about asbestos identification, the only way to confirm the presence of asbestos is by laboratory testing.

When asbestos was identified a number of the tradespeople interviewed were aware of dangers involved in handling in situ asbestos. However, they admitted to proceeding with work recklessly, as following the appropriate guidelines would delay the job or increase costs. With a slow economy, increased competition and lower profit margins, attitudes have not changed today.

The statistics and data with respect to asbestos disease are clear for all to see. If we are going to have any impact on preventing

Amosite (brown) asbestos fibres as viewed under a polarised light microscope.

the next wave of asbestos disease, we need to work together collectively to educate those around us.

The fact is there is no safe level of asbestos fibre and, for that reason, builders should limit their exposure.

By Michael Shepherd, NATA Technical Assessor at the Australian Institute of Occupational Hygiene

For more information contact: Email: admin@asbestosindustry.asn.au Website: www.asbestosindustry.asn.au

Hail damage asbestos cement roof. Note the loose chrysotile (white) asbestos fibres.

BuildIT QLD EDITION 2015/16 11

B U I L D I N G C E R T I F I C AT I O N & C O N S U LT I N G S E R V I C E S

INSURANCE FOR BUILDING CODE COMPLIANCE Building Certification Group provides more than just building certification by offering their full suite of services to projects throughout Queensland.

Operating since the inception of private building certification, Building Certification Group collectively has over 150 years of building certification experience and is one of the largest groups of building certifiers in Queensland. As a medium sized company, BCG provides the level of service desired by our clients; the professionalism and quality of a large organisation but with the direct personal relationship of an individual professional consultant across our three services.

Certification Our building certifiers are licensed and qualified at all levels, enabling us to process the building certification of all residential, commercial and industrial Class 1 to 10 buildings and structures, either repetitive or unique. The use of our industry leading software bespoke for building certification in-house and onsite enables us to deliver fast, accurate results and cost savings to our clients.

a ‘one-stop-shop’; a company who facilitate the lodgement and obtainment of applications and assessments for their clients in addition to building certification.

Consultation We welcome and encourage invitations to become part of a project’s design team at the concept and design stage, enabling us to provide building compliance solutions and time and cost efficiencies early before building certification. Building code interpretation and analysis, Deemed-to-Satisfy compliance, Alternative Solutions, fire and life safety reports and disability access audits are examples of the stand-alone professional consultancy services available from BCG. With a proven track record of multi-scale inner city, suburban and rural developments and our knowledge of building legislation envied by our competitors and prized by our clients, make Building Certification Group your certifier of choice for your next project.

Facilitation The submission of various building work related applications to Local and State Governments and other organisations is a service BCG takes pride in facilitating and is a service few building certification companies offer. We understand a client’s need for

BUILDING CERTIFICATION GROUP

For more information contact: Phone: 1300 130 168 Email: info@buildingcertificationgroup.com.au Website: www.buildingcertificationgroup.com.au

CERTIFY | FACILITATE | CONSULT

As one of the largest and most experienced groups of building certifiers in Queensland, we provide our full range of certification, facilitation and consultancy services for building projects of any size throughout Queensland. Our industry leading software in-house and onsite enables us to deliver fast accurate results and cost savings to our clients. The choice is simple, choose Building Certification Group for your next project.

CERTIFY | BUILDING CERTIFICATION Residential, Commercial and Industrial All building classes (Class 1 through to Class 10)

FACILITATE | APPLICATION FACILITATION Council Applications – Siting Variations, Town Planning, Build Over Sewer/Stormwater, Plumbing, Water Connection, Driveway Crossover Assessments & Reports - Energy Efficiency, Bushfire Hazard, Queensland Fire & Emergency Services (QFES), Fire Engineering

CONSULT | PROFESSIONAL ADVICE Deemed-to-Satisfy compliance and Alternative Solutions Fire and life safety reports and disability access audits 47 Manilla Street East Brisbane QLD 4169

12 BuildIT QLD EDITION 2015/16

P: 1300 130 168 F: 07 3872 2406 info@buildingcertificationgroup.com.au www.buildingcertificationgroup.com.au

GO WHERE THE TRADIES GO For the best service and advice drop into any one of our 275 stores or phone 1300 131 843

B U S I N E S S A S S I S TA N C E

PERCEPTION IS EVERYTHING IN SMALL BUSINESS How to create a professional and ‘bigger’ presence for your small business When it comes to small business, both men and women alike find appeal in being able to create the perception of having a bigger, and more professional business.

By improving your professional image in the marketplace you can successfully create a perception that your small business is actually larger than it is. The advantage of creating this perceived ‘presence’ is that you can then compete with any company, regardless of how large or established they may be. It also means you can approach your potential clients with the confidence that your business will be perceived as being professional, resource-rich, customer-focused and, therefore, capable of delivering what you promise it will.

The secret to creating this perception of ‘presence’ lies in: • Always ensuring your business calls are answered in a timely and professional manner.

• Being customer-focused by always delivering proficient customer service.

The value of a Virtual Receptionist

By integrating a virtual receptionist or components of a virtual receptionist into your small business, you are able to refocus on your core business and not worry about whether the phones are being picked up or if calls are being answered professionally.

Of course, we are all perfectly capable of answering our own calls, but what often happens is that you are busy focusing on something and when the phone rings your attention is diverted.

After the call you then need to undertake follow-up work, which can turn that one-minute call into half an hour of your time being taken up. So, to be able to have that knowledge that no matter what you are doing or what is going on in your day, your phones are being answered reliably and professionally, means you are making the most of your working time.

It also means you can go on holidays and your business remains in operation. Often, with small businesses, if you go on holidays that one-week time away can become a month or so of down time before you actually catch up. However, with a virtual receptionist the business can remain operational, even if you’re not there.

So what exactly is a virtual receptionist? And how can it assist your small business to gain greater success?

A virtual receptionist will mean your phone calls are answered on your behalf by a professional receptionist and if required your diary managed for you.

For more information contact: Phone: (07) 3447 2400 Email: info@soireception.com.au Website: www.soireception.com.au

VIRTUAL RECEPTIONIST QUEENSLAND

• • • •

Never miss a call Capture all your enquiries Increase your sales Improve your professional image

Free Your Time Take Back Control Refuel Your Passion All your calls answered professionally 14 BuildIT QLD EDITION 2015/16

Grow your business today Call us NOW (07) 3447 2400 info@soireception.com.au | www.soireception.com.au

CLADDING

CODE PROVIDES NEW PROCESS TO DETERMINE COMPLIANCE OF EXTERNAL CLADDING SYSTEMS The Building Code of Australia 2015 (BCA) has been adopted in Queensland, providing a new way to check the suitability of external cladding systems.

The BCA took effect on 1 May 2015, and one of the code’s recent amendments is a new methodology to existing verification methods already contained in volumes one and two of the BCA. The code allows for a number of Deemed to Satisfy (DTS) building solutions in relation to weatherproofing external walls via utilisation of products such as: • masonry • metal cladding • plywood sheeting • timber weatherboards • fibre-cement planks or sheeting Building contractors who utilise the above DTS solutions can be confident those systems comply with performance requirements of the BCA if installed appropriately.

As new and innovative building materials and cladding systems are developed, these new systems and products might not comply with the current DTS solutions.

Popularity soars for external cladding systems Products gaining increasing popularity as external cladding systems, such as polystyrene panels, aluminium composite panels and phenolic panels, fall into the above category.

The Queensland Building and Construction Commission (QBCC) supports innovation and new technologies that improve building performance or efficiencies. However, there has been concern for

several years that some non-traditional cladding systems may not have been thoroughly assessed to ensure compliance with all of the relevant performance provisions of the BCA. In particular, the QBCC has witnessed many examples of nonDTS cladding system failures in relation to water penetration of buildings, particularly around door and window openings and at exposed edges of the cladding systems.

Excessive reliance on flexible sealants questioned The QBCC recently noted what appears to be excessive reliance on flexible sealants, which deteriorate, shrink or detach for weatherproofing rather than the use of permanently installed flashings that are proven traditionally to last the life of buildings.

When considering the use of any non-DTS solution, architects, residential design draftsmen and building contractors should be cognisant of the importance of weatherproofing external cladding systems, particularly at openings.

When parties are lodging a Development Application utilising non-DTS cladding systems, they will need to provide evidence to the private certifier that the proposed system fully meets Performance Requirements of the BCA. When assessing the suitability of a non-DTS solution, a private certifier will rely heavily on evidence, such as a report issued by a Registered Testing Authority, a Certificate of Conformity, Code Mark Accreditation, a certificate from a professional engineer or other material, which evidences its suitability for use.

BuildIT QLD EDITION 2015/16 15

CLADDING

Certifiers ready to consider risk factors

Strict compliance with instructions necessary

Building certifiers will now also be able to consider the results of reports commissioned under the new verification method in the BCA, which considers a number of risk factors for a proposed cladding system on a building.

These risk factors include the: • wind region speed • rise in storeys of the building • exposure of roof and wall junctions • widths of eaves • shape of the building and complexity of cladding systems • design inclusions such as decks, porches and balconies

Building contractors are reminded that strict compliance with the product manufacturer installation instructions is necessary to ensure the “tested system” performs as intended, thus meeting the performance requirements of the BCA and providing a weatherproof building for the occupants.

The new verification methodology prescribed in the BCA 2015 does not replace the traditional process of “evidencing suitability”.

Rather, it is another methodology that practitioners may utilise to evidence compliance with the performance provisions of the BCA. The QBCC is hopeful the new verification regime will continue to encourage development and innovation of new cladding systems and materials, and ensures buildings are safe for occupation and weather-tight.

An accompanying testing regime is now referenced in the BCA, which requires a test specimen to be produced and subjected to a number of tests to replicate things such as wind pressure and water penetration. AS 4284 “Testing of Building Facades” has been referenced as the criteria for a number of simulated tests for weatherproofing, including around door and window junctions, horizontal and vertical control joints and at electrical boxes and the like.

If the private certifi er is satisfi ed that sufficient evidence exists to approve the use of the proposed system, an alternate solution is approved and the system may then be utilised in the proposed construction.

16 BuildIT QLD EDITION 2015/16

By Brian Bolton, communications manager at Queensland Building and Construction Commission

For more information contact: the QBCC 24/7: Phone: 139 333 Website: www.qbcc.qld.gov.au

Smart System. Exsulite

®

The facade system builders will love Dulux,®, Australia’s largest trusted Dulux coatings supplier is proud to bring you Exsulite, the innovative thermal wall cladding system.

Delivering: • Energy Efficiency • Structural Integrity • Weatherproof Barrier System • Full BCA Compliance

Exsulite utilises multiple layers to build a strong, smart walling system.

Timber or Steel Frame Breathable Wall Wrap

Smart System. Extra Design Flexibility For more choices in wall articulation

Smart System. Thermal Efficiency R3 – R7 System Options

Cavity Spacers Exsulite Expanded Polystyrene (EPS) Panels Exsulite Matrix Basecoat™

Smart System. BAL 29 Certified

Alkali Resistant Reinforcement Mesh

Approved for use in bushfire prone areas

Exsulite Matrix Basecoat Exsulite Texture Coating Exsulite Membrane Topcoat

Smart System. CodeMark™ Certified Fully Certified System / National Installer Network

Learn more at exsulite.com.au | 1300 662 841 Dulux AcraTex 1 Jeanes Street, Beverley SA 5009.

6296/0715

Dulux® AcraTex® is a division of DuluxGroup (Australia) Pty Ltd. ABN 67 000 049 427.

Dulux®, AcraTex® and Exsulite® are registered trade marks and Matrix Basecoat™ is a trade mark of DuluxGroup (Australia) Pty Ltd. CodeMark™ is a trade mark of Cert Mark Australasia Pty Ltd.

BuildIT QLD EDITION 2015/16 17

COMMERCIAL TUBING PRODUCTS

INNOVATIVE STEEL SOLUTIONS TO BRING YOUR PROJECTS TO LIFE Austube Mills has tried and tested steel products that are strong, durable and locally manufactured.

Whether building residentially or commercially, only Austube Mills structural steel pipe and tube will give you peace of mind with its quick lead times, application flexibility with design and its locally manufactured products that are strong, durable, structurally sound and Australian made.

Why choose DuraGal® or DuraPrimed®?

DuraGal® and DuraPrimed® products are compliant to Australian and New Zealand Standards. Make sure you check the line-marking on each length to ensure it is Austube Mills, then you will know you have got DuraGal – it is not just any GAL. Benefits of building with Austube Mills steel: • DuraGalPLUS – delivers a smooth internal and external zinc coating with a minimum average of 100 g/m2 each side for superior protection.

• High-performing structural steel products available in a range of practical shapes for design flexibility.

• Higher strength steel – the C450PLUS dual-grade section boasts stronger steel for the same weight, equalling a more efficient design and a lower cost. With the same elongation as C350L0, there is no loss of ductility and workability.

• Architectural benefits – slimmer posts and shallower beams, less intrusion into living spaces, shallower floors, higher ceilings or height limits more easily satisfied.

• Easier cutting, drilling and handling during fabrication and onsite • They have a national sales and service team.

• Technical experts to assist you with your design or application queries.

Every product contributes to the safety and visual aesthetic of the home or building. Whether you use Austube Mills pipe and tube in obvious design applications or they are hidden from view, you can rely on its structural security and corrosion protection every time.

Where can I buy Austube Mills steel?

Structural steel pipe and tube products are available via Austube Mills’ nationwide distribution network.

For more information contact: An Austube Mills distribution partner in your state Website: www.austubemills.com

Building with structural steel pipe and tube?

Build with Austube Mills.

For more information or details of your closest distributor, visit www.austubemills.com

18 BuildIT QLD EDITION 2015/16

ENERGY

ENERGY EFFICIENCY A new discussion paper confirms that authorities compare lighting products to ‘low-hanging fruit’ when it comes to regulating the energy efficiency of electrical equipment.

Australian and New Zealand regulators have released a document entitled ‘Product Profile’ on the future regulation of incandescent, halogen and compact fluorescent lamps. The 68-page document contains detailed analysis of these products in the Australian and New Zealand markets.

The document contains options for future regulation of these products, including a ban on the ubiquitous halogen lamp, and prohibition of the remaining incandescent lamps in the Australian marketplace.

Its release reaffirms a widely held notion in the industry that governments view lighting products as “low-hanging fruit”, when it comes to regulating energy efficiency of electrical equipment.

as an alternative to CFLs as tungsten filament lamps were phased out.

While somewhat more efficient than incandescent lamps, the ongoing use of halogen lamps is a lost opportunity with respect to savings that could otherwise be made with a full transition to CFL and LED lamps.

Popularity of LEDs leads to greater scrutiny The widespread adoption of LEDs across most applications of lighting in recent times has provided authorities with another opportunity to regulate lighting products.

LEDs are inherently more energy efficient than GLS lamps. The same grouping of regulators mentioned at the beginning of this article is expected to release an options paper covering LEDs in the first quarter of 2015.

Regulations ban the sale of GLS lamps Virtually all Australians would be aware the common pear-shaped incandescent lamp, technically known as the GLS lamp, has been banned.

Australia was the first developed country to implement the ban.

When announced, the initiative led to a rise in sales of compact fluorescent lamps (CFLs) as consumers in general embraced the measure as good for the environment.

Australian standard AS 4934.2:2011 specifies requirements for minimum energy performance standards (MEPS), maximum wattage and other requirements for incandescent and halogen lamps with a range of common shapes and caps, which operate at extra lowvoltage or at mains voltage.

The standard covers lamps individually supplied or as part of a luminaire. Excluded are coloured lamps, automotive lamps and special purpose lamps including traffic signals, navigation lamps, oven lamps, infrared lamps and ‘rough use’ lamps.

Minimum requirements also apply to compact fluorescent lamps (CFLs). MEPS for CFLs came into effect in Australia in November 2009, along with the sales restriction on GLS lamps. The regulations apply to CFLs with integrated means for controlling starting and stable operation that are intended for domestic and similar general lighting purposes. The requirements apply to self-ballasted lamps of all voltages and wattages irrespective of the type of lamp cap, supplied as individual lamps or as part of a luminaire.

Consumer preference for halogens over CFLs At the time the Australian Government announced the phase-out of GLS lamps it was thought the measure would result in substantial energy savings. The government estimated that phasing-out incandescent lamps in Australia would save four million tonnes of greenhouse gases a year.

Subsequent developments suggest the anticipated energy saving from the phase-out was too optimistic. What regulators did not envisage was consumer preference for energy hungry halogen lamps over CFLs. This is notwithstanding the spike in sales of CFLs when the phase-out was announced.

A telling passage in the product profile reads: Despite CFLs (and LEDs) representing a superior economic choice, sales of halogen lamps have continued to be significant and a new range of mains voltage omnidirectional halogen lamps has emerged

Options for regulation explored Incandescent, halogen and compact fluorescent lamps have a range of options including: • no action (business as usual) • increasing MEPS stringency • a complete transition to CFL/LED technology • endorsement labelling • influencing lighting design to reduce overall energy consumption • changing consumer behaviour through information campaigns • grants and subsidies to encourage energy efficiency At the time this article went to print regulators were in the consultation stage with stakeholders, and there was no indication of which direction the new regulation would take. However, we can assume that ‘no action’ is not an option and considerable resources have already gone to producing the product profile and governments continue to look for greater energy efficiency dividends from lighting.

New regulations are more likely to increase the stringency of minimum energy performance standards. The product profile devotes considerable space to options for this measure.

Lighting Council Australia (LCA) has closely consulted with its lamp supplier members in response to the product profile. LCA’s intention, which aligns with the intention of regulators, is to support the phasing-out of lamp technology when viable alternatives are available.

Careful consideration is required in the context of increasing the availability, quality and affordability of LEDs.

By Bryan Douglas, CEO at Lighting Council Australia

Halogen lamps … are we about to see a ban on these products?

BuildIT QLD EDITION 2015/16 19

FRAMES & TRUSSES

WHY DO SO MANY BUILDERS GIVE SIMON HOME FRAME & TRUSS THE THUMBS UP! When the going gets tough, The Simons get going. 4 generations have withstood the test of time; meeting challenges head-on by adapting to markets and customer needs.

Our customers appreciate that we’re more than just a reliable supplier of high quality Frames & Trusses but provide additional value by helping them to identify and manage risk. Our estimators and detailers are highly trained professionals, who often recognise problems, such as miscalculations or omissions and then provide solutions to ensure the plans will work. This has often saved builders and tradies embarrassment, time and money.

Being a fourth generation family owned business that has been in the industry since 1928 instils trust. Not only do we know the construction business; it’s a part of who we are, we’ve survived countless of challenges over the decades, so you know that we’ll be there tomorrow, next year and next decade.

We stay in touch with what’s happening in the market and have the flexibility to adjust accordingly; by sourcing new and innovative products but also by keeping up to date with technology. We are investing a further $1m in our state-of-the-art 5000m2 factory on the Sunshine Coast to upgrade our technology, resulting in faster turn-arounds for shorter lead-times.

We also have some of Queensland’s, largest, under-cover timber yards at both our Ipswich and Toowoomba sites, which additionally feature 1200m2 hardware stores to effectively provide one-stopdestinations for all building materials and tools.

Our customers have the peace of mind that we provide a superior service as standard.

If you too would like to experience superior product and service, contact us today.

For more information contact: Phone: (07) 54 462 808 Email: masterbuilders@simonhome.com.au Website: www.simonhome.com.au ALL SERIOUS ENQUIRIES RECEIVED WILL BE ENTERED INTO OUR PRIZE DRAW TO WIN A $500 CREDIT TOWARDS THEIR ORDER. Prize drawn 1st July 2016. Winner will be notified by email.

SUNSHINE COAST | TOOWOOMBA | IPSWICH

SUNSHINE COAST | TOOWOOMBA | IPSWICH

WHERE THE TRADIES GO

WHERE THE TRADIES GO

20 BuildIT QLD EDITION 2015/16

K I T C H E N & B AT H R O O M S

MAKE AN IMPACT Aqua Pure is a leading water filtration specialist manufacturing in Australia. For over 80 years Aqua-Pure water filters have been used in homes worldwide to provide a cleaner, clearer, better tasting drinking water.

Aqua-Pure drinking water filter systems’ are affordable, easy-to-change and are the choice of kitchen designers and professional plumbers.

The Aqua-Pure AP9000+ range of water filters - consisting of four variants designed to cover the range of filtration needs within the home.

AP9000+ is designed to be used with a separate tap for filtered drinking water.

AP9100+ filters all cold water allowing homeowners to maintain their kitchen design whilst at the same time enjoying filtered water.

AP9200+ consists of two cartridges providing superior filtration within the market.

AP9400+ allows homeowners to have filtered water with hot and cold water through a single mixer tap.

The AP9000+ range of water filters utilises Integrated Membrane Pre-Activated Carbon Technology (I.M.P.A.C.T.) providing four levels of protection. The single encapsulated filter cartridge provides a high level of quality filtration to deliver cleaner, clearer, better tasting water.

Features include: • • • •

Cyst barrier - prevents infection Reduction in sediment - improves clarity Chlorine removal – improves taste and odour Reduction in bacteria – better protection

An additional feature is the ‘Smart’ Indicator* LED light located in the filter tap which changes from blue to red when it’s time to change the filter.

The Aqua-Pure AP9000+ range is available from all leading plumbing outlets. *The AP9100+ does not have a smart indicator ®Aqua-Pure is a registered trademark of 3M

For more information contact: Phone: 1300 345 837 Website: www.aquapure.com.au

AP9000+

BuildIT QLD EDITION 2015/16 21

SURVEYING TOOLS

LEICA-GEOSYSTEMS – YOUR HASSLE FREE SITE PARTNER Today, more than ever, having accurate and reliable tools on site can save you considerable heartache and dollars. The primary goal of Leica-Geosystems is to be your site partner and eliminate site issues forever.

Have you ever purchased unreliable, inaccurate or even substandard laser levels or laser distance measuring-type devices? This can cost you greatly financially and we are most certainly here to help you put these issues firmly in the past.

Leica-Geosystems invented the Disto TM range of laser distance meters over 20 years ago. This innovation allowed many tasks to be completed onsite that previously were not possible. The Leica Disto TM range offers some incredible features, including 3D positioning, that are designed to further increase the vast assistance that Disto TM can provide you onsite.

For all your levelling and alignment tasks Leica-Geosystems offers the RugbyTM range of rugged and smart laser levels. With a 12-plus year history, the RugbyTM has built a formidable reputation.

All Leica Rugby models offer features such as impact and dustproof housings, a very long-range, knock down warranty (R800 only), high accuracy and fantastic reliability.

The BuilderTM Total Station will allow you to complete a large variety of tasks, making you much more self-reliant onsite. From simple straight lines or right angles, replacing a peg or even an easy set-out of points off grid lines. The builder helps you work through tasks that are otherwise left to a third-party. If you need to do something onsite now, the BuilderTM is your ideal partner.

22 BuildIT QLD EDITION 2015/16

Tools like these pay for themselves many times over. Your C.R. Kennedy ‘Total Survey Solutions’ representative along with your local dealer, can help you work out where these Leica-Geosystems construction tools can immediately start reducing issues and increasing productivity on your construction sites.

“CR Kennedy’s expertise, advice and technical support are a critical part of our business on a daily basis,” said John Wilson, Principal Surveyor at De Witt Consulting in Newcastle, NSW.

For more information contact: Anthony Wright: Phone: (07) 3862 6210 Mobile 0418 915 478 Email: awright@crkennedy.com.au Website: www.crksurveyshop.com.au/dealers

ABLE PRI CE EAT NB

PRICE SATISFA C

S

U

TILE & STONE

A R A N T EE TION GU

Queensland’s most comprehensive tile selection centre.

Stone3 will assist you in delivering premium tiles to you and your clients. Doing so with great service, on time and in budget.

Check out our extensive range at the Stone3 showroom today.

Call 07 3399 6575 or visit us in store for a quote today.

Shop 3/229 Junction Road, Cannon Hill QLD 4170 www.stone3.com.au

T E L E C O M M U N I C AT I O N S

A MOBILE

PHONE plan offer built for Master Builder members only.

• Massive

5GB of data

• Range of included handset choices *Some models may incur additional monthly charges

RESTRICTED AREA

MEMBERS ONLY

• Unlimited

*Standard National calls, SMS & MMS to most fixed & mobile numbers in Australia

• Data sharing in Australia for greater savings • 2 months port in credit when moving services from another provider • Dedicated support team from a local MBT helpdesk

Master Builders & Telstra have joined forces to build the perfect mobile phone plans exclusive for you and your business. More data and great value on Australia’s best mobile network.

Call

Receive a bonus Universal Powerbank. Available to the first 1000 subscribers only

1300 881 372 to take advantage of this Master Builders only offer.

THINGS YOU NEED TO KNOW: Minimum total cost is $2,160 ($90/mth) over 24 months. Monthly repayment options (MRO) for the handset vary in price depending on handset and plan chosen. If you cancel early the remaining handset payments will be higher as you’ll no longer receive a discount to offset your handset cost. Ultimate Plan: Some usage is excluded; such as calls/text/MMS to Premium numbers (e.g. 19xx numbers). 1234, 12455, 12345 numbers and to some satellite numbers, content changes and use overseas. Unused allowances expire monthly. For new connections the total of your minimum monthly fee (excluding any device payments) and charges for eligible calls over your included calls/text/MMS allowance will not exceed $90 per month. Android, Google Play and other marks are trademarks of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. The Spectrum device and TM are trade marks and ® are registered trade marks of Telstra Corporation Limited, ABN 33 051 775 556

Master-Builders_Magazine AD_V5.indd 1

10/07/2015 2:28:20 PM

BuildIT QLD EDITION 2015/16 23

TRANSPORT

YOUR WORK VAN WILL NEVER BE THE SAME The new Renault Trafic changes the game, combining French style and Formula 1 punch.

The Renault Trafic has been the Number 1 van in Europe for the last 17 years, so it’s no surprise to see how Renault have upped the ante with it’s re-design.

The first thing you notice about the Trafic is the bold look.

There’s an obvious link to Renault’s stylish passenger cars, and it’s far from a traditional box-on-wheels. Cleverly, everything’s done for a reason. The angled windscreen improves harmonics for a quieter drive while the design maximises space inside, providing dynamics that help deliver the impressive fuel economy of up to 6.2L per 100kms.

Powering the all-new Trafic is another little secret. The guys that helped Red Bull F1 Racing’s Sebastian Vettel win four consecutive Formula 1 titles have tweaked the new twin turbo 140 dCi Energy engine. So it’s quick off the mark, has more torque at lower speeds, a slick gear change, responsive steering and beefy brakes.

But the biggest surprise is the storage capacity.

Out-back, the load area can take up to 1.2-tonnes and either 5.3m3 or 6m3 of cargo. A clever hatch beneath the passenger seat allows for items up to 4.15m long in the longwheel base and 3.75m in the shortwheel base.

Up-front, there’s 14 storage areas and more than 90L of practical space for day-to-day items – so you’ve got a cleaner, safer cabin with work gear stowed away. What’s more, the cabin has been designed to work as a mobile office, with features like a laptop desk, A4-sized clipboard for work orders as well as mobile phone cradles and more.

Best of all, the Trafic is priced from $32,990 drive away and comes with an extensive warranty, roadside assist and capped price services. Combined with practicality, value, performance, space, style and more, the all-new Trafic has everything you need. Guaranteed.

For more information contact: Website: www.renault.com.au

All-New

Renault TRAFIC The van you need. Guaranteed.

†3-years/200,000km (whichever comes first) warranty applies to all new or demonstrator Trafic. Demonstrator vehicles receive balance of new vehicle warranty. ^First 3 scheduled maintenance services capped at $349 per service on new and demonstrator Trafic models, based on standard scheduled servicing from new and on normal operating conditions. Scheduled maintenance services required every twelve (12) months or up to 30,000km (whichever occurs first). Trafic 3 is subject to adaptive servicing requirements, as determined by the Oil Condition System, and may require servicing prior to the standard twelve (12) months or 30,000km service interval.

renault.com.au

24 BuildIT QLD EDITION 2015/16

TRANSPORT

SSANGYONG DELIVERS OUTSTANDING FAMILY VALUE Actyon SX dual cab diesel is one of the most comfortable utes around, offering outstanding flexibility for the whole family.

The Actyon SX dual cab diesel truly is the family friendly ute, with its coil spring rear-suspension and quiet, car-like interior offering outstanding flexibility and comfort for the whole family.

It has to be one of the most comfortable utes travelling around, sporting a two-litre turbo-charged diesel engine with 360Nm of torque and is available in 4x2 or 4x4 – the Actyon is ready for work all week and play all weekend.

The Actyon also offers amazing value through its Bluetooth phone-connectivity with wireless music streaming, CD/MP3 player and USB connectivity, cruise control, air-conditioning, electric windows and mirrors, two child seat anchors, anti-lock brakes with electronic stability control, up to 2.3 tonne towing capacity with a braked trailer and three-year 24/7 roadside assist as standard.

Ssangyong is a Korean vehicle manufacturer that commenced operations in 1954. It now has over 144,000 employees and operates in 100 different countries. The company is working hard to develop future models and enjoy a period of consistent growth.

Using its alliance with Mercedes, Ssangyong has quickly expanded in competence and confidence. Utilising Mercedes Benz engine technology, Ssangyong began producing the 4X4 Kyron SUV, which launched in Australia during 2006 and the Actyon SUV 4X4 launched later that same year.

The Actyon Sports Dual Cab Ute made its Australian debut in early 2007, quickly becoming the largest selling vehicle in the range while the new Kyron was launched in early 2009, featuring a diesel particulate filter plus an Australian made six-speed automatic transmission.

In 2010, Mahindra invested heavily in the Ssangyong business.

Mahindra is one of India’s largest auto makers with an annual turnover in excess of US$15bn. This investment has given rise to a strong performance led by huge investment in research and development.

This research and development has resulted in stylish new products rolling off the production line that represent uncompromising value.

Ssangyong continues to focus on performance, styling and technological excellence. This ensures that motorists around the country have enjoyed, and continue to enjoy, the tremendous performance and reliability that comes from owning a Ssangyong.

For more information contact: Phone: 1800 731 252 Website: www.ssangyong.com.au

BOLDLY KOREAN. BEAUTIFULLY PRICED. actyon sx 4x2 manual

$28

,490

from

*

d r i v e a w a y

Powerful turbo diesel engine • Air conditioning • Deep tray with liner • ABS with electronic stability control (ESC) • Cruise control • Coil spring rear suspension CD/MP3 with Bluetooth and music streaming • Steering wheel audio controls • Dual air bags • Electric windows and mirrors • 2 ISOFIX child seat anchors Front fog lights • Remote central locking • Alarm • Superb drive and handling • Up to 2.3 tonne towing capacity with braked trailer • 16” Alloys Brake assistance system (BAS) • Active rollover protection (ARP) • Traction control • 3 year 24/7 roadside assist • 3 Year/100,000km warranty, whichever comes first. *Offer available at participating dealers on Actyon SX new stock vehicles only (as depicted). While stocks last. Not available with other offers. Private buyers only.

WWW.SSANGYONG.COM.AU BuildIT QLD EDITION 2015/16 25

26 BuildIT QLD EDITION 2015/16

W AT E R P R O O F I N G

SOLVING DAMAGE ISSUES WITH INNOVATION Nearly 80% of building faults in Australia are related to waterproofing failures, making ineffective waterproofing one of the biggest problems faced by the building industry today.

Despite Australia being known for its dry climate, water damage can affect projects on every level including terraces, decks, courtyards, balconies, basements and car parks.

Unfortunately water damage can be more than just an inconvenience. It can cause long-term structural problems in buildings, and lead to flooding and property damage, especially in occupied areas like basements and car parks. Good drainage is essential if you want to ensure that your property and structures are protected but traditional paving and drainage systems often come with a number of limitations.

Sub basements and car parks can be particularly vulnerable to water damage and flooding as they are often located well below ground level. This is becoming an increasing problem as with a growing shortage of street level parking in urban areas, more and more car parks are being located underground, leading to a need for more effective below ground, negative pressure waterproofing.

The good news is that many waterproofing failures can be prevented. With adequate knowledge and understanding of the causes of membrane damage and the right systems in place it’s often not too difficult to alleviate the problem. Developments in technology have increased the options for those who are looking for a cost effective way to get rapid surface drainage while still allowing access to the waterproofing and services beneath, and for effective waterproofing of their subterranean basements and car parks.

What’s wrong with traditional paving and drainage systems?

Traditional paving systems have a number of downsides over the more innovative modern paving systems out there. To start with, traditional paving systems can be susceptible to unwanted and unattractive efflorescence staining which means that over time their appearance will start to deteriorate.

Beneath the surface there can be other problems with traditional paving systems. Installation of pavers on sand cement usually requires multiple trades, tools and materials. These are all potentially hazardous to the membrane and can lead to damage and leakage.

Cracking and staining of pavers means regular repair is often needed and this can also damage the integrity of the membrane.

Ponding is common on traditional paving systems and this can cause damage to the mortar bed and affect overall paver stability.

With traditional systems it can be very difficult to gain access to the membrane to repair it when a fault is identified, and bedding pavers or tiles can prevent access altogether. This difficulty accessing damaged membranes can mean that minor issues are left untreated until they get out of control and lead to long term, costly structural damage.

Leakage coming down from the surface can cause ongoing issues in subterranean areas including car parks and basements, especially if their waterproofing isn’t up to standard. Older forms of waterproofing for basements and car parks are often not sufficient to withstand water pressure, which can lead to them being vulnerable to damage.

In many cases, waterproofing problems aren’t detected until too late with traditional paving methods that can conceal problems, especially if the area is constructed over a habitable space. In many cases a serious structural issue is the first indication of a problem and by then the damage is done and major repairs will be needed.

Fortunately, adjustable paving and drainage systems can provide many buildings with a way to eliminate a significant proportion of the waterproofing problems caused by traditional systems and reduce the likelihood of structural damage going undetected.

BuildIT QLD EDITION 2015/16 27

Design an effective waterproofing system with Queensland’s leading specialist trade supplier Ineffective or defective waterproofing is one of the biggest problems currently faced in the building and construction industry. Water ingress and subsequent damage can affect every level of a building project including basements and subbasements, terraces, courtyards, car parks, decks, balconies and roof tops.

Along with the effects on the building structure, the costs of waterproofing failure can extend to damaging the reputation of the construction company and disruption to the lives of all involved. Bayset can help design an applicable waterproofing system and can create solutions for rectifying pre-existing waterproofing problems.

There are a number of reasons waterproofing failure can happen, and unfortunately most are related to a desire to cut costs and increase the speed of construction to make a perceived better return on investment.

Some of the causes of waterproofing failure include: • Poor initial design • Builders failing to pick up incorrect designs, due to lack of technical knowledge • Waterproofing contractors pricing what is on the specifications, rather than checking that specified systems are fit for the purpose • Builders pushing waterproofing contractors to find cost reductions to secure contracts • Lack of Quality Assurance procedures during a project 28 BuildIT QLD EDITION 2015/16

To have a property that is completed on time, on budget and without any revisions is the goal. Bayset understand the steps and products required to achieve a correctly waterproofed building. Firstly, a waterproofing specialist should be involved in the initial design, so the builder can educate the client on the potential ramifications of cutting corners on waterproofing. Bayset’s highly respected technical team is capable of specifying and supplying fully warranted waterproofing solutions for all new builds and remedial projects.

Secondly, waterproofing should be prioritised as a main concern for the builder. Waterproofing contractors need to take responsibility to both educate themselves on the possible outcomes and to show builders where and why a specified system may fail. Builders need to understand that pushing the waterproofing contractor to apply a membrane to a wet, dirty or poorly prepared substrate to complete the job more quickly is a false economy.

Lastly, before any waterproofing is covered over by backfill, screeds, tiles or ballast it should be thoroughly checked for defects. Australian Standard 4654.2 states that on completion of the installation of a membrane system, inspection and/or acceptance testing shall be conducted.

Bayset staff have many years of experience in the waterproofing industry and are on hand to help through the entirety of a project. The Bayset team has a trade background with specialities comprising of

below ground waterproofing, crack injection, concrete repair, tile adhesive, levelling compounds and sheet membranes. This gives Bayset the practical experience to select the right material and advise on the application of the product.

With 8 locations in Queensland, Bayset has fully stocked branches and a large distribution centre at Coopers Plains which allows us to keep the best Australian and international brands at hand. Bayset stocks a complete range of waterproofing, flooring and concrete repair products, along with tools and accessories, such as hand tools, mixers and floor grinders, paint brushes and a full range of tiling and carpeting trims.

Our locations also have showrooms and dedicated training areas which allow our customers, suppliers and staff to interact and learn from our industry experience.

To learn more about our waterproofing systems or shop any of our products, visit our website, call or drop into the branch nearest to you.

Visit: www.bayset.com.au

Bayset is an independent specialist trade supplier to the waterproofing, flooring, and concrete repair industries.

Established in 2000, Bayset has eight fully stocked branches across Queensland which supply product to resellers and trade accounts across Australia and South East Asia.

Bayset is a trade only supplier of national and international brands, including Sika, CTA, Bostik and Soprema Sheet Membranes. Bayset has direct access to many industry bodies and specialist companies worldwide, including exclusive Australian distribution for world leading Newton Waterproofing Systems.

Through quality management practices we strive to bring innovation, environmental awareness, risk mitigation and best practice principles to our customers.

Key Strengths • Conveniently located branches • Committed and qualified technical and sales team • Prompt attention to problem solving • On site quality assurance systems • Large stock holding • Extensive product ranges • Fully warranted systems • Computerised inventory systems • Reliable delivery times • Accessibility to our people • Sourcing of specialised items

CALL BAYSET TODAY TO RECEIVE A COMPLIMENTARY CATALOGUE

www.bayset.com.au Coopers Plains (07) 3722 3822

Geebung (07) 3865 8457

Noosaville (07) 5473 0443

Kawana (07) 5437 9145

Burleigh Heads (07) 5520 4251

Arundel (07) 5563 7033

Mackay (07) 4952 1666

Townsville (07) 4775 4855

BuildIT QLD EDITION 2015/16 29

WAT E R P R O O F I N G

How can adjustable paving support help prevent water damage?

Under Slab, Planter Box & Vertical Sub Surface Drainage Solutions

Adjustable paving supports consist of height adjustable pedestals that go underneath pavers allowing the finished surface to be level. This creates a cavity that improves insulation and facilitates rapid surface drainage while at the same time keeping services and waterproofing accessible.

There are a number of different adjustable paving systems available to meet different requirements, from roof gardens and balconies, to basements and car parks and everything in between.

Although they may vary slightly, these systems are all easy to install and provide a flexible, cost effective solution for any space.

Unlike traditional paving systems, adjustable paving supports eliminate ponding and efflorescence. The surface water moves quickly to the 4mm open grout joints to the cavity minimising any back up of water during heavy rain events. This eliminates the need for expensive & often clumsy drainage grates. Adjustable paving supports also reduce the load on slabs to improve their structural integrity and help reduce cracks and other damage.

There is no mechanical fixing required when using adjustable paver supports. The supports simply sit on the membrane and are locked in place by the paver joint tabs. This allows easy access without the need for heavy tools that run the risk of damaging the waterproof membrane. Because the height and slope are adjustable, it’s easy to create a level finish even when the pavers are of inconsistent thickness.

Adjustable paving support systems like VersiPave are commonly used in major civil construction projects and buildings to allow long-term access to the membrane.

Systems like VersiCell are ideal for car parks and basements as they are designed for sub surface drainage and waterproof membrane protection. Once they are installed with a waterproofing membrane there is no need for an additional layer of protection and the VersiCell modules are able to withstand heavy loads (100t/m2) including those imposed by mechanical equipment like bobcats and wheelbarrows.

VersiCell is also used extensively in major civil construction projects as a drainage solution. Most recently as a rising ground water management tool under multi story building slabs. Geofabric is installed over the cut profile followed by the VersiCell and waterproof membrane. This enables the builder to eliminate the need to excavate & dispose of huge amounts of cut spoil. The cell will discharge water at a rate of 16.5 litres/m2/sec, which out performs traditional drainage methods of crushed aggregate by approx. 10 fold. The ground water is then collected in pits & pumped back to the surface as either irrigation or storm water.

VersiDrain 8 mesh is a high strength dimpled HDPE drain sheet that is ideal for managing negative side water. This solution was used on the Chatswood to Epping rail link where a 25-50 mm layer of shotcrete was made, followed by a liquid applied waterproofing membrane. 100mm of shotcrete was then applied.

Don’t let long-term water damage affect the structural integrity of your buildings. By switching to adjustable paving supports & high flow drainage cell you can enjoy a system that’s cost effective, easy to repair and maintain, drains more effectively as well as sound proofing and reducing the transmission of radiant heat to the substrate.

30 BuildIT QLD EDITION 2015/16

W AT E R P R O O F I N G

THE RIGHT CHOICE FOR YOUR WATERPROOFING PRODUCTS! The real importance of waterproofing reflects on the consequences of NOT waterproofing.

“It is difficult - but not impossible - to conduct strictly honest business” At Envirotech we make an effort to present you with up to date information to enable you to keep up with best industry practices within the waterproofing industry. We can provide you with waterproofing and building products including the correct application and installation procedures.

The emphasis of Envirotech is to make people more aware of the growing issues with waterproofing in the building industry in Queensland. If you are not familiar with our company, we would be pleased to hear from you in relation to any needs or questions regarding waterproofing installations or just the correct technical information regarding products and their installation procedures.

In brief, Envirotech Waterproofing Solutions was established in 2008 and have been responsible for providing outstanding products and technical waterproofing information ever since.

Our specialty is giving our clients what they need with the best possible advice to provide a durable waterproofing system for their project.

Our regular customers value our information and product knowledge so let Envirotech be part of your business. Our aim is to make waterproofing a more experienced trade by giving greater knowledge and information to the building industry. We are here to help you to get the right information and best products for your next waterproofing and building project.

For more information contact: Phone: (07) 3865 3600 (East Geebung) Phone: (07) 3277 2328 (Archerfield) Website: www.envirotech-waterproofing.com.au

Envirotech Waterproofing Solutions Pty Ltd Established in 2008 Over 25 years experience in the building and waterproofing industries.

EnviroTech Waterproofing Solutions provide you with information regarding the best performing waterproofing systems, including application and installation procedures by approved contractors.

All our systems are installed under the direction of a report or methodology written by EnviroTech which means all systems are quoted and installed by licensed independent, certified Waterproofing applicators chosen by EnviroTech waterproofing solutions to protect you and your client from water ingress.

Our specialty is giving our clients the best possible information to provide a durable waterproofing system for their project.

We have two locations: 254 Robinson Road, East Geebung 4034 | 1/594 Boundary Road, Archerfield 4108 QBCC LICENCE NO. 1191345

Phone: 07 3865 3600 | www.envirotech-waterproofing.com.au

BuildIT QLD EDITION 2015/16 31

2015/16

Product directory index 34 ......... Asbestos removal

42 ......... Kitchen & Bathrooms

34 ......... Balustrading

43 ......... Letterboxes

35 ......... Bathrooms

42 ......... Maintenance

35 ......... Blinds

42 ......... Marble

36 ......... Building approvals & Advice

43 ......... Metal working & Machinery

36-37 .... Building certification & Consulting services

42 ......... Painting & Decorating

38 ......... Business assistance 38 ......... Cement & Concrete 39 ......... Commercial tubing products 39 ......... Concrete polishing 38 ......... Concrete pumping 39 ......... Concrete tools 40 ......... Doors & Door hardware 40 ......... Flooring services 40 ......... Frames & Trusses 40 ......... Gutter protection 41.......... Home decor 41.......... Hot dip galvanizers 42 ......... Industrial height safety 42 ......... Joinery

44 ......... Painting services 42 ......... Pre mix concrete 04 ......... Skip bins 45-46 .... Steel 46 ......... Steel fabrication 47 ......... Swimming pools 46-47 .... Temporary fence hire 48 ......... Timber supplies 48 ......... Transport 49 ......... Tree care / Arborists 48 ......... Vacuum systems 48 ......... Water tanks 49 ......... Walls & retaining walls 50-51 .... Waterproofing

BuildIT QLD EDITION 2015/16 33

A S B E S T O S R E M O VA L

ASBESTOS

AHI Asbestos Consultants

Inspection Report Register Sample Analysis Management Plan

info@ahiasbestos.com.au www.ahiasbestos.com.au

Inspections Available Mon to Sat

Licence No. 2303625 exp. 30/03/19

1300 141 662

Asbestos Consultants BALUSTRADING

Over 20 years experience in Glass Balustrading.

QBCC 79260

Barry’s Balustrading specialise in: • Glass Pool Fencing and Gates • Glass & Aluminium Balustrade • Framed and Frameless Glass • Semi Frameless Glass • Installed to Decks, Stairs and Balconies • Colour and Design Made to Order • Domestic and Commercial Projects Office: 07 3889 9554 | Fax: 07 3205 6692 sales@barrysbalustrading.com.au www.barrysbalustrading.com.au Master Builder No. 68808

34 BuildIT QLD EDITION 2015/16

1300 141 662 Members of the Asbestos Industry Association (AIA)

Are You Compliant?

• Building constructed before 2004?

• Do you have a current Register & Management Plan?

• Is the one you have less than 5 years old?

• Do you plan to renovate or demolish? √ Fast turnaround times √ Excellent service √ Competitive prices √ Fully insured √ Over 15 years in the industry

B AT H R O O M S

Gold Coast’s Premier Bathroom & Kitchen Retailer

Unmistakably Vogue …

We invite you to discover our stunning showroom located at the Brickworks Annex – Southport. The 300m2 state of the art display area is a haven for those in search of designer Bathroom and Kitchen products. Vogue Spas & Bathrooms specializes in all the well known European and Australian brands such as, Villeroy & Boch, Perrin & Rowe, Grohe, Rogerseller, Hansgrohe, Duravit, Kaldewei, Bette, Parisi and Kohler just to name a few. Shopping for all your bathroom and kitchen needs will be an enjoyable and effortless experience.

Whether you’re building or renovating, Vogue Spas & Bathrooms experienced team would be happy to assist you. Our selection of products will reflect what the latest trends in bathroom design are all about. Drop in or call us today.

Residential, Trade and Commercial Enquiries Welcome

Established 32 Years ph: 07 5528 0077 fax: 07 5528 0767 email: info@voguespas.com.au The Brickworks Annex 6/19 Warehouse Road , Southport QLD 4215

www.voguespas.com.au BLINDS

1300 884 749

www.blindo.com.au

• Venetian Blinds • Roller Blinds • Roman Blinds • Vertical Blinds • Shutters • Outdoor Blinds • Awnings • Curtains • Panel Glides

Blindo is a Queensland owned and operated company that offers a wide range of products, styles, colours and fabric to suit any home. Blindo will work along side your construction team to provide a seamless and personalised service. From initial consultation through to installation of the product, Blindo will guide you in the right direction.

• Buy Factory Direct • Fast Turn Around Time • Servicing All Areas Of QLD • Sales People Talk Directly To Site Managers BuildIT QLD EDITION 2015/16 35

B U I L D I N G A P P R O VA L S & A DV I C E

No Job Too Big Or Too Small Domestic Certification Pool Certification

We provide comprehensive residential building certification specialising in the Brisbane and Moreton Bay Regions. Our commitment to personalised service ensures a fast, thorough certification process for our valued clients. We have formulated a professional, efficient customer service, with state of the art technology to break down the traditional barriers of distance. Our goal is to have your project approved first time, on time.

P: 07 3265 4114 18 Kingtel Pl, Geebung info@buildingaaa.com.au

www.buildingapprovalsandadvice.com.au B U I L D I N G A P P R O VA L S & A DV I C E

COASTAL BUILDING APPROVAL SERVICE A

CO RO

IC E

P AP

The building approval supplier of choice for the Mackay Whitsunday region

BUI L NG DI

AL ST

VAL

V SER

48 Gingham St, Glenella, Mackay Qld 4740

P.O. Box 5503, Mackay MC Qld 4741

P: (07) 4942 0266 F: (07) 4942 0277 E-mail: admin@coastalbuildingapproval.com.au

www.coastalbuildingapproval.com.au

B U I L D I N G C E R T I F I C AT I O N & C O N S U LT I N G S E R V I C E S

BUILDING CERTIFICATION GROUP CERTIFY | FACILITATE | CONSULT Building certification of any project, any size, any class anywhere in Queensland.

Facilitation of all applications to Council, energy eiciency reports, bushfire assessments and QFES etc.

Consultancy services including fire and life safety reports, disability access audits and building code compliance.

47 Manilla Street East Brisbane QLD 4169

P: 1300 130 168 F: 07 3872 2406 info@buildingcertificationgroup.com.au www.buildingcertificationgroup.com.au

36 BuildIT QLD EDITION 2015/16

B U I L D I N G C E R T I F I C AT I O N & C O N S U LT I N G S E R V I C E S

• 72 hour Building Approval • Town Planning • Energy Efficiency • On-Site Sewerage Designs • Bushfire Assesments

Stuart Building Certification is an approved accredited Building Surveyor and Building Certification Consultancy company owned by Rosanne Stuart, who has been in the building industry for over 20 years.

• Fast Efficient and helpful - a professional approach to guide you through the building control process • A prompt and friendly response to your enquires within 24 hours • Expert Advice in Building Surveying and Certification • Comply with all requirements and provisions of local authority • Competitive Prices on Building Certification

To get a quote on your residential or commercial building plans, call Stuart Building Services today on 07 3201 0117

Mobile: 0428 156 688 Fax: 3201 1677 Office Address: 100 George Holt Drive, Mount Crosby

• Queensland Wide Certification Residential & CommeRCial Building appRovals

www.stuartbuildingcertification.com.au B U I L D I N G C E R T I F I C AT I O N & C O N S U LT I N G S E R V I C E S

Building Certification and Consulting Services • Servicing South East Queensland since 2010 • Our team of certifiers are licensed to approve all building classes of any size.

• Available for domestic and commercial projects including: • Residential: New dwellings, townhouses, and multi-unit developments.

• Commercial: Offices, childcare, shopping centres, fit-outs.

• Industrial: Warehouses, manufacturing.

• Prompt assessment and inspection services.

• Obligation free quotes.

• Credit card payment available.

Apex Certification and Consulting

Phone: (07)3205 4000 Email: info@apexcc.com.au

Website: www.apexcc.com.au BuildIT QLD EDITION 2015/16 37

B U S I N E S S A S S I S TA N C E

CONCRETE PUMPING Ingham QBCC License 1166303

VIRTUAL RECEPTIONIST QUEENSLAND

• • • •

Never miss a call Capture all your enquiries Increase your sales Improve your professional image

Free Your Time Take Back Control Refuel Your Passion

All your calls answered professionally

NORTH

Magnetic Is Townsville

SHORE Concrete Pumping Pty Ltd

WE SPECIALISE IN ALL ASPECTS OF CONCRETE PUMPING AND CONCRETING • Pool Spraying • Foundations • Block Fill

• Slabs

Grow your business today Call us NOW (07) 3447 2400 info@soireception.com.au www.soireception.com.au

COMMERCIAL TUBING PRODUCTS

The name you can trust when you build with steel www.austubemills.com CEMENT & CONCRETE

Any Job - Any Where!

Commercial-Residential-Industrial Complete Packages for: Tilt-ups • Suspended • Waffle slabs • Conventional Dean@aaconcrete.com.au • Based on the Sunshine Coast for work all over South East QLD • 38 BuildIT QLD EDITION 2015/16

0404921841 • www.aaconcrete.com.au

CONCRETE POLISHING

CONCRETE TOOLS

Tough tools for a tough trade! …for a top finish!

•

Top Line concrete tools and methods have been used worldwide in the concrete finishing industry for over 30 years.

•

The stainless steel construction prevents rust, pitting and corrosion and can be easily cleaned with little or no water.

•

All hand held tools (groovers, mag floats, edgers) come with our exclusive handle, guaranteed not to crack.

•

The Top Line product is committed to the professional tradesman who takes pride in his work.

Ph:

07 3849 6793

Fax: 07 3503 9342 Email: topline@radius.com.au 3 Dividend Street, Mansfield QLD 4122 BuildIT QLD EDITION 2015/16 39

DOORS & DOOR HARDWARE

INTRODUCING OUR NEW

EXPOSED SLIDING DOOR SYSTEM

JMA HARDWARE MASTER SLIDING DOOR SYSTEM CONTEMPORARY EASY TO INSTALL COST EFFECTIVE DURABLE

ENTRY PULL HANDLES

DOOR FURNITURE

ARCHITECTURAL HINGES

DOOR CLOSERS

STAINLESS STEEL CONSTRUCTION

Plus much more! Visit out website www.jmahardware.com.au to see our product range in full.

Phone Us Today 07 3841 2275 E sales@jmahardware.com.au www.jmahardware.com.au FLOORING SERVICES

LIKE US

GUT TER PROTECTION

QBCC LICENCE NO. 1213256

TIMBER FLOOR

I n s ta l l at I o n s p e c I a l I s t s

www.lbfloors.com.au Floor sanding and polishing Timber floor installation Cork & Parquetry Floating floors and bamboo All supplied, laid & finished Top quality service, craftsmanship & products Ph: 07 4630 6714 | Mob: 0408 657 596 E: josh@lbfloors.com.au FRAMES & TRUSSES

SUNSHINE COAST | TOOWOOMBA | IPSWICH

WHERE THE TRADIES GO

BUILD WITH TOTAL

CONFIDENCE

40 BuildIT QLD EDITION 2015/16

Metal Gutter Guards for Residential and Commercial gutters.

Fire rated leaf guard, Box gutter protection, and keeps leaves out of gutters and vermin out of the roof.

Supply or Supply and Installation service.

We specialise in trade customers and insurance repairs.

Phone: 1300 30 29 10 Website: www.totalguard.com.au Email: info@totalguard.com.au

HOME DECOR

The longest serving “Home Décor Company” in Hervey Bay for over 24 years!

“The Patio Specialists” WWW.FRANKSHOMEDECOR.COM.AU Ph: 4124 4985 Fax: 4124 3964 Email: admin@frankshomedecor.com.au

Image © Balanced Image Studio

H O T D I P G A LV A N I Z E R S

YES—IT’S Proven corrosion protection HOT-DIP for building & construction.

GALVANIZED! Extended Durability (AS 2312:2014)

FAST turnaround... ...NEXT DAY with The Silver Bullet® No weather interruptions Commercial or Residential projects Eight Australian locations

INDUSTRIAL GALVANIZERS The external steel frame of this spectacular structure was hot-dip galvanized for long-lasting, low maintenance protection—by Industrial Galvanizers.

1300 INGALV (1300 464 258)

www.ingal.com.au BuildIT QLD EDITION 2015/16 41

Phone: 07 4927 2722 Fax: 07 4927 3233

54 Glenmore Road, North Rockhampton Qld 4701

www.haar.com.au

• Painting & Decorating: All Types of Finishes • Building Maintenance • Caulking Services

MARBLE

La Rocca Marble & Granite specialise in creating custom stone products in Queensland.

Kitchens - Bathrooms - Staircases

If you can imagine it we can produce it.

Renovations, new developments, customised furniture, statue bases, wall cladding and so much more.

25 Gibbs Street, Arundel, Queensland 4214

Tel: (07) 5597 0811 | Fax: (07) 5539 5936 JOI N E RY

MAINTENANCE

Cabinet Makers to Central QLD since 1946

CRANE MAINTENANCE QUEENSLAND specialises in all lifting and access equipment from the standard 3mth checks to a full 10 year rebuild and everything in-between.

Specialising in: • • • •

Kitchens Joinery Custom Furniture Commercial & Office Fitouts • Bathrooms & Laundry • Wardrobes • Flat Pack Available

Phone: 4922 1366

www.largesfurniture.com.au QBCC Lic # 042972

42 BuildIT QLD EDITION 2015/16

Construct Master Holdings PTY LTD ABN: 62145003841 CAN: 160 938 938 QBCC Lic No: 1244453

✓ Master Painters Member ✓ Aussie Painters Network Member ✓ Employsure Member

www.constructmaster.com.au Emanuel Micota 0487771737 emanuel@constructmaster.com.au P A I N T I N G & D E C O R AT I N G

Specialists in all wallcovering installation including; murals, fabrics & wide vinyls for the home or any size commercial work.

All painting and decorating services including: commercial & residential, interior & exterior, decorative painting.

www.iwallpaperinteriors.com.au Email: info@iwallpaperinteriors.com Phone: 0458 019 363

We also do on site service on other equipment such as bacho’s excavators, welders, lighting plants etc.

We have a yard in mackay and our mechanics can travel to where ever your machine is.

Please check our website out at www.cmq.net.au Phone our office 0749550022 or Jason 0459166994 Email: admin@cmq.net.au

PRE MIX CONCRETE INDUSTRIAL

• Industrial Rope Access • Equipment Sales • Equipment Hire • Training • Inspection Services • Aerial Access Inspections

AP9000+

For Quality Service and a Competitive Price Call Now Maroochydore

5479 5100 Burleigh Heads

Kawana

5493 3558 Yatala

Narangba

3888 3547

Coolum

5351 1590

Beerwah

5494 0906

5593 5466 3807 7277

Toowoomba

4634 9114

Townsville

4774 6607

Quarries Goomeri 07 41684547

Bracalba

5496 6221

Kingaroy

4162 3303

Wondai

4169 0881 Townsville

Munduberra

4165 4744 Townsville Orders 07 4774 3828

Tumbulgum

02 6676 6131 07 4778 8956

COMMERCIAL

Highpoint Access & Rescue are a Central Queensland based company that specialise in Industrial Safety Solutions. Highpoint is able to provide you and your business with:

PA I N T I N G & D E C O R AT I N G

RESIDENTIAL

ABN 91 022 147 723 ACN 103 403 710

K I T C H E N & B AT H R O O M S

www.hy-tec.com.au

INDUSTRIAL HEIGHT SAFETY

LET TERBOXES

Commercial Letterboxes Stainless Steel Plates Custom Made To Order

Ph: 07 3349 3004

Residential Letterboxes Rural Mail Boxes Signage

www.letterboxman.com.au M E TA L W O R K I N G & M AC H I N E RY

BuildIT QLD EDITION 2015/16 43

PAINTING SE RVIC ES

BEFORE

AFTER

ANI Painting is an accredited Dulux Roof Applicator, providing a 10 year guarantee We can clean, paint and protect your new or existing property whatever size and type. Our dedicated and professional team of painters have experience in an extensive range of painting purposes including, but not limited to residential, multi-storey buildings,

apartment complexes, warehouses, factories, business/office premises, shop fronts and shopping centres and heritage sites.

Our policy is to ensure high quality workmanship and total peace of mind for all clientele.

Contact us now on: anipainting@gmail.com or 0406 269 375 / www.anipainting.com.au Dulux Roof Applicator Registration no. R0685 QBCC Licence no. 1050939 NSW 221958C

SKIP BINS

Save money Save time Get a bag

10%

ABN holders get

OFF

first pickup*

10% off on your

• Super tough - won’t rip or tear • No rental fees • Fill in your own time • 3 convenient sizes • Use just like a skip bin!

1300 JUNK IT (5865 48)

www.aussieskipbags.com.au

44 BuildIT QLD EDITION 2015/16

Bags available online, by phone, or at a stockist near you. *Mention this advert to recieve your 10% discount. valid till 31st December 2015.

Offer only applies to your first pickup.

STEEL

We at AUSTRALIAN STEEL FRAMES believe that every frame should start with experience and knowledge.

That is why we have some of the industries’ most experienced members on staff. We pride ourselves on our attention to detail and customer service right through each step of the process.

OUR PRODUCTS ✓ ✓ ✓ ✓ ✓

Residential Houses All types of residential properties.

Roof Trusses and Wall Frames Trusses to suit any application big or small.

Sub Floor System Strong and durable flooring systems.

Unit Projects - Large or small.

Two Story Residential Experts in residential steel properties.

✓ ✓ ✓ ✓ ✓ ✓ ✓

100% termite proof Completely recyclable Frames stay straight and true Your frame is chemical free Site erection and installation Transportation if required Expert advice

Phone: (07) 3802 9700 www.australiansteelframes.com.au Email: sales@australiansteelframes.com.au

17 Quarry Road, Stapylton QLD 4207 QBCC License No. 1307464 STEEL

• Supplying Quality Steel Building Products since 1955 • Manufacturers of Stepco™ products • Stepco™ Galvanized Stair Stringers available ex stock • Stepco™ Aluminium Stair Treads in 3 finishes 1) Commercial - Mill finish with Safety yellow nosing 2) Domestic - Anodised finish with Charcoal nosing 3) Premium - Western Red Cedar powder coat • Professional advice at a competitive price • House columns available ex stock in Galvanized and Supagal finish • Full range of Galvanized Brick Lintels available ex stock (including T Bar Lintels) • Stockist of W beam Guardrail components for Vehicle protection around Buildings/Gas Tanks etc.

• General Fabricators of Structural Steel Beams and Columns etc. to the Domestic / Light Commercial Industry • Delivery service available to all Brisbane areas and North/ South coasts • Opening Hours / Monday – Friday 7am- 4pm www.palmersteel.com.au Email: greg@palmersteel.com.au 429 Creek Rd, Mt. Gravatt, Brisbane, 4122 Fax: 07 38490601

Phone: 07 33499111

BuildIT QLD EDITION 2015/16 45

STEEL

STEEL

TE M P O R ARY F E NC E H I R E

®

The

The Temp Fence Specialist!

Fence Bloke ‘What you want, when you want it!’

We are a Gold Coast based business who have been trading since 1986. As well as general steel sales we also offer a steel fabrication service making us a one-stop shop for all your steel requirements.

From small jobs to home reno’s and new house plan requirements, we will not be beaten on price.

Please come in, call or email for any enquiries 9 Stevenson Court, West Burleigh Qld 4219

Ph: 07 5576 6037 Fax: 07 5576 6136

• • • • • • • • •

Posts Beams Welding General fabrication Steel cut to size Stairs & handrails Steel sales 350G CDW Tube Delivery to All Areas

TEMPORARY FENCE HIRE

YOU HIRE – WE DO THE REST

HIRE IT!

WE HIRE:

• Construction Fencing • Pool Fencing • Crowd Control

FOR FAST AND RELIABLE SERVICE CALL

All pool fencing including Aluminium & Glass – Semi Frameless & Frameless

www.metrosteel.com.au

1300 352 992

3204 1000 QBCC Lic 1190 517

Mon-Thurs. 7.45-4.15, Fri till 4pm and Sat 8.30-11.30am

Email: sales@marshallsteel.com.au

WE SUPPLY & INSTALL:

Call us direct

Email: thefencebloke@tpg.com.au

www.temporaryfencinghirebrisbane.com.au

www.marshallsteel.com.au S T E E L F A B R I C AT I O N

Oz-Tac Engineering is an Australian owned engineering, structural steel and metal fabrication specialist.

Providing services to the building, timber, mining, quarrying and earth moving industries.

REPAIR, MODIFY OR CREATE A BRAND NEW METAL ENGINEERING PROJECT

Oz-Tac has on hand highly experienced boilermakers, hydraulic fitters & sheet metal workers.

07 5482 7080

www.oztacengineering.com.au

Fax: 07 5482 7081 Mobile: 0407 826 001

QBCC:1121508

ACN: 105 086 093

46 BuildIT QLD EDITION 2015/16

ABN: 41 105 086 093

Email: sales@oztacengineering.com.au

TE M P O R ARY F E NC E H I R E

SWIMMING POOLS

NU-LOOK POOLS

4/16-18 Beenleigh-Redland Bay Road, Loganholme QLD 4129

Exceptional Quality Exceptional Service

nu-look@tpg.com.au

call: 1300 882 559

BRISBANE & GOLD COAST

Specialists in New Concrete Pools and Pool Renovations

www.concretepoolsbrisbane.com.au Quality Concrete Pools

QBCC Licence No. 1000724

Exceptional Pool Renovations

Builders Packages tailored to suit your requirements, including shell only, swim ready and complete.

We also supply and install all types of pool fencing including aluminium, semi-frameless and frameless glass.

POOL CONSTRUCTION

|

POOL RENOVATIONS

Exceptional Service |

FREE QUOTES

|

EXPERT DESIGN ADVICE

BuildIT QLD EDITION 2015/16 47

TIMBER SUPPLIES

At Mr Kwila Timber Division we supply quality dressed Kwila profiles at an affordable rate, giving our customers access to a diverse range of Kwila products to suit any project.

At our Salisbury yard we also specialise in job lots which comes in handy when you just need that one piece to finish the job.

If you ever need SOLID Kwila in:

See the Mr Kwila Timber team at 66 Raynham Street Salisbury during Monday to Friday 7.30am to 4.00pm mr.kwila@iinet.net.au

OR CALL

TIMBER SUPPLIES

Supplier of construction timber and builder’s hardware

Window Sills - Screening - Staircase components - Handrail - Jambs Large feature posts - T & G SN EM Flooring - Furniture components

07 3277 2166 (Office) 07 3277 7938 (Fax) Ana Sinclair (0432 198 739)

TRANSPORT

W AT E R TA N K S

BOLDLY KOREAN. BEAUTIFULLY PRICED. ACTYON SX | 4X2 MANUAL FROM

$

28

,490

*

HIGH STRENGTH RE-INFORCED

D R I V E A W A Y

CONCRETE TANKS AND PLUNGE POOLS

Darra: (07) 3375 1726 46 Queensland Rd Brassall: (07) 3813 0644 1/217 Pine Mountain Rd

www.awoodshed.com.au *Offer available at participating dealers on Actyon SX new stock vehicles only (as depicted). While stocks last. Not available with other offers. Private buyers only.

Supplier of a full range of Australian flooring and decking

VAC U U M S Y S T E M S

Alarm Intercom CCTV Ducted Vacuum

• Concrete Water Tanks up to 160,000 Litres • Constructed onsite with 37 years experience

Installation, Service Builders Packages

• Engineered tanks to meet Australian Standards • Custom Designed Tanks and Plunge Pools • Above ground, Inground and Underground

Walk on our 70 square metres of flooring display at 46 Queensland Road, Darra

www.flooringqld.com.au 48 BuildIT QLD EDITION 2015/16

• Commercial and Residential • Concrete Tank Repairs

Mobile: 0410 577 000 Ph: 07 3800 6469 Fax: 07 3402 2869 Email: joevacum@optusnet.com.au Sec Lic: 3245452

QBCC Lic: 57864

PO Box 571, Palmwoods, QLD 4555

Ph: 0754459514

QBCC License No. 062813 Email: sales@northcoasttanks.com.au

TREE CARE / ARBORISTS

Tree and Palm maintenance and removals (large and small sites) providing a comprehensive assessment of trees on your site from general maintenance to dangerous tree removals.

ed nsur uote i y l l Fu eq n fre o i t a lig

ob

•

Tree Removal

•

Arborist Tree Reports

•

Tree Maintenance

•

Stump Grinding

•

Tree Surgery

•

Chip & Mulch Sales

•

Palm Removal & Cleaning

•

Over 20 Years Experience

Qualified Arborist (Cert V + ISA TRAQ)

T: 07 3829 2331 M: 0404 339050 E: enquiry@familytreecare.com.au W: www.familytreecare.com.au WA L L S & R E TA I N I N G WA L L S

Queensland’s choice in Retaining Wall Solutions

Sleeper Range:

Beam range:

• • •

• • •

Smooth Plain Sleepers Timber Look texture Sleepers Rough Stone texture Sleepers

Sleeper Size range: • • • • •

1000mm x 200mm x 75mm 1200mm x 200mm x 75mm 1600mm x 200mm x 75mm 2000mm x 200mm x 75mm 2400mm x 200mm x 75mm

The Q Pro Advantage:

C Beam: 100mm & 150mm UC 100mm 14.8 Beam UC 150mm 23 Beam

Massive range of length & sizes to choose from, a size for every job.

What else is at Q Pro: • • • •

Wheel Stops Rubber Wheel Stops Pier Caps Rubber Speed Humps

Phone: 07 3881 0208 Facsimile: 07 3881 0209 Email: sales@qpro.com.au Website: www.qpro.com.au

Showroom

270 Leitchs Road Brendale Qld, 4500

• Q Pro Sleepers are engineer certified up to 3350mm high.

• Easy transport options through our fleet of specialised trucks.

• Choose from the largest sleeper range only at Q Pro. • Free Technical design guide for easy DIY at: www.qpro.com.au/technialdesignguide.php

Production facility 40 South Pine Road, Brendale Qld, 4500

BuildIT QLD EDITION 2015/16 49

W AT E R P R O O F I N G

Danny Philp 0423 500 336

City & Guilds of London

associateddan@bigpond.com

ABN: 32 274 701 150 | QBCC Lic No. 1174982

• Based on the Gold Coast • 30 Years Experience in Flat Roofing & Waterproofing • Specialising in Bituminous Membranes

Whether it’s New Construction or Renovation Work, High Rise Development, Flat Roofing, Villas, Townhouses; We Have The Solution For You! Wet Areas • Wall Tanking • Roofs • Balconies • Planters

Bathrooms

WAT E R P R O O F I N G

With over 25 years in the Building and Waterproofing industry, Envirotech Waterproofing Solutions can provide you with unsurpassed technical and product information for your next project.

We can also provide you with specifications, methodologies, consultancy work and approved contractors.

Envirotech Waterproofing Solutions are people you can trust.

QBCC LICENCE NO. 1191345

254 Robinson Road, East Geebung 4034 1/594 Boundary Road, Archerfield 4108 Phone: 07 3865 3600 www.envirotech-waterproofing.com.au

WAT E R P R O O F I N G

Brisbane North-Brisbane SouthRedlands-Ipswich-Gold Coast

Specialising in Waterproofing of Houses - Units - Townhouses Retaining Walls etc.

Phone 0411496710 www.globalwaterproofing.com.au QBCC Lic No. 1159820

50 BuildIT QLD EDITION 2015/16

Planters

Roofing

W AT E R P R O O F I N G

CHOOSE

DRYMAN

FOR ALL YOUR WATERPROOFING NEEDS INSTALL ATIONS, REPAIRS AND MAINTENANCE

Phone: 1300 DRYMAN (379 626) Email: admin@dryman.com.au

dr y m an.c om. au QBCC LICENCE NO. 1097206

BuildIT QLD EDITION 2015/16 51

EXPERTS IN HOME THEATRE AND A WHOLE LOT MORE Today's world is one of constantly evolving technologies with people demanding the latest advances in every aspect of their life – not just to increase work productivity or improve health and communications – but also to live a better lifestyle.

These days the typical Australian home has more technology than we ever dreamt of in the last century and the curve is not flattening out.

In the audio-visual (AV) world high definition (Hi Def) is the latest key word at the moment, leading to exciting developments such as 4K resolution video, Dolby Atmos Surround systems and Hi Def 24bit music formats. Furthermore, today’s customer wants all the latest technologies with the push of a button, or swipe of a touchscreen.

A conversation with any builder will show they want to offer customers these latest technologies, but are often reluctant to be bogged down in the potential pitfalls of offering a technology that is not their field of expertise. Successful builders have either had to become experts in multiple and esoteric fields for their customers or develop relationships with other experts to provide the ultimate building solution. That is where showrooms such as Big Picture People Gold Coast come in handy.

Here you will find showrooms that display AV technologies in rooms that truly reflect a home environment. There are systems for all budgets, and clients can benefit from the personalised service and expertise of professional staff.

“It’s been of huge benefit to us,” said Peter Riewoldt from Chelbrooke Homes.

“I can bring my clients in and treat them as if it is my own showroom, with my very own custom installation consultants on-hand to solve their particular issues. They are a wonderful complement to the services I offer my clients.”

Their friendly staff can help your clients design their ideal custom theatre, whether it is a dedicated room or a shared living space.

“Just bring in your plans and we will go through them with you.

Whether we are dealing directly with the customer or if the builder wants to get involved, we will help them achieve their ideal home and perhaps offer suggestions if it makes things easier,” said AV Consultant Justin Evans.

“Then, once a system is decided upon, they can relax. We can handle the entire installation from pre-wire to final fit; we happily work with the builders, so that everyone is on the same page.”

“This is one less thing that I have to worry about,” said Bill Bruce from Lifestyle Extensions.

52 BuildIT QLD EDITION 2015/16

“Our demonstration rooms are set up so that our clients can experience just how good a serious dedicated system can be,” said Kym Glover, proprietor of Big Picture People Gold Coast.

“They can also see that they can choose a discrete system for a living room, games room, or even outdoor pool area for the kids without compromising performance.

“One minute, you’ve got a perfectly ordinary living room. Then, with the flick of a switch, movie time turns the room into a high quality cinema room.”

It is not all about cinema either; if your client wants to listen to music around the house there are many systems available that can offer a simple, flexible and easy to use solution.

“We can help your client decide which system suits them and then make it a reality,” said Kym. “Perhaps they want to view Foxtel or other media devices on multiple TVs? No problem. Want to control it all from their phone or tablet? Of course.

“Integrate lighting, energy management, cameras? Absolutely.

We can help make it happen.”

Three good reasons to visit Big Picture People Gold Coast: 1. A showroom that introduces, inspires and informs – When the actual equipment being discussed is on display in a home environment it is more convincing and powerful than any words can describe.

2. Make use of your local experts – Mistakes can be expensive if they are caught too late. Use the experts to do what they do best.

3. Anything is possible - The trick is to find the balance between budget, aesthetic and performance.

To provide the ultimate home, today’s builders either have to become experts in every field, or develop a network of specialists to compliment their work.

Big Picture People Gold Coast are the experts in home theatre.

Come visit their showrooms to find out why today.

For more information contact: Website: www.bigpicturepeople.com.au

Living Room one minute …

Home Theatre the next …

Bring your plans into our real environment showrooms and we’ll help you create your dream theatre.

Phone: (07) 5578 8005 Shop 2, Robina Super Centre, 86-104 Robina Town Centre Drive

www.bigpicturepeople.com.au

Austral Volkswagen The Master Builders Preferred Volkswagen Dealer.

AUSTRALIA’S LARGEST

AMAROK DEALER Transporter

Amazing Austral Volkswagen Fleet Discounts For Master Builders* Master Builders cash in now with Amazing Fleet Discounts and capped price servicing on Caddy, Transporter, Amarok and Crafter. Cab chassis, Vans and Utes, one for everyone.

A for Austral Volkswagen - Amazing!

Commercial Vehicles

Your Master Builder Volkswagen Partner

Austral Volkswagen Commercial Vehicle Centre Ph: 3034 6300 www.australvw.com.au NEWSTEAD Corner of Breakfast Creek Rd. & Evelyn Street

Capped Price Servicing applies to the first 6 standard scheduled services of vehicles. Exclusions apply. See volkswagen.com.au. Volkswagen Group Australia reserves the right to at any time modify or discontinue the Capped Price Servicing program.#Conditions apply. See www.volkswagen.com.au/en/technology_and_service/VolkswagenService/General-Warranty-Terms-and-Conditions.html .Fleet discounts and capped price servicing offers available to eligible master builders.

Cr