2022 SHOWCASE
GEN ER A L TOO L Fecon Compact Stumpex The Fecon Compact Stumpex is a slowspeed, high-torque auger-style stump grinder designed specifically for compact utility loaders. • Slow auger speed ensures a safer work environment with no flying debris and faster cleanup • High torque eradicates stumps of any species from 4 to 11 inches in diameter in a single plunge • Powerful, robust drive generates up to 4,000 pounds of torque • Features hardened auger cone that ensures positive draw into stump and stepped blades made of 1/2-inch-thick durable AR500 material • Suited for compact utility loaders with 10 to 20 gpm of hydraulic flow and 2,000 to 3,000 psi www.forconstructionpros.com/21220715
Multiquip ST1 Series Electric Submersible Pumps The 9-pound ST1 Series electric submersible pumps are equipped with a 3/4-inch discharge, produce flows up to 27 gpm and a maximum head of 23 feet, and are capable of removing water to within 1/4 inch of the surface. • Aluminum pump casing resists corrosion and helps dissipate heat • Designed with powerful capacitor-assisted electric motors, internal thermal overload protection, dual shaft seals, and a direct drive thermoplastic impeller secured with stainless steel hardware • All power cords provide strain relief protection • Engineered with an internally adapted mechanical float switch to automatically regulate operation (Model ST1F only) www.forconstructionpros.com/21403821
General Equipment 332H and 348H EPICÔ Series Two-man Hole Diggers General Equipment Company introduced its 332H and 348H EPICÔ Series two-man hole diggers, which raise the bar for performance, ease of use, and safety. • Featuring 5.5-horsepower Honda GXV160 four-stroke engines — capable of digging holes up to 18 inches in diameter • Ergonomically engineered Power-FLEXÔ composite operator handles, which provide maximum control, strength, and balance during operation, while dampening vibrations • New Auger-LOKÔ feature for conveniently removing stuck augers • New, lighter weight, heavy-duty, enclosed spur-gear transmission with oversized bearings, heat-treated shafts, and machine-cut gears • Model 332H has a 1-3/8 inch hexagon auger drive connection for use with 4400 series earth augers and 5500 series auger extensions • Model 348H has a 7/8-inch square auger drive connection for use with PSD/PLDBH series earth augers and extensions — offering a maximum digging torque of 190 foot-pounds • A MaguraÒ twist-grip throttle control and an all-metal centrifugal clutch • Both models weigh 71 pounds without an auger www.forconstructionpros.com/21220179
Barreto 3107C Chipper The 1,890-pound 3107C chipper uses a series of load-sensing valves to optimize material feed, with feed rate automatically slowing or stopping to allow the flywheel to maintain maximum rpm when the load on the feed system increases or as the flywheel slows. • Designed to chip up to 7-inch-diameter wood material • A 31-horsepower Briggs & Stratton Vanguard V-twin engine with electric start • Rugged, heavy-duty design • Operator safety bar allows for the manual start, stop, and reverse of the feed wheel • Ready to tow with a standard 2,900-pound torsion axle and quick-release coupling www.forconstructionpros.com/21194729
www.ForConstructionPros.com/RENTAL
RPN1221_43-47_GeneralTool.indd 43
DECEMBER 2021
43
11/16/21 11:55 AM
