Knegt brochure eng 2017 5

Page 1

Q U A L I TY T R A C T O R S E U R O P E

COMPACT POWER 08-2017/2018


Foreword Knegt Quality Tractors has been established in response to the great demand for and short supply of robust, versatile and compact tractors at an affordable price. The logical solution in this case is a range of robust and unique Compact Tractors. With over 20 years of experience in the agricultural and equestrian sector, we started the development and manufacture of the ideal compact tractor that gets the job done. As a result of our collaboration with one of the largest tractor manufacturers in Asia as supplier together with right people, witch have a passion for technology, Knegt Quality Tractors Europe was set up in 2006. As a standard, each Knegt is fitted with: 4-wheel drive, low/high gearing, power steering, continuous PTO, multiple hydraulics, locking differential and a European street permit. This not only makes the Knegt tractor a robust and flexible vehicle, but because of its compactness, it can be used anywhere. The Knegt tractor was primarily developed for the equestrian sector, but soon parties from other sectors, such as horticulture and forestry, gardeners, leisure and sports accommodations, also started showing an interest. Because of the expansion options available and many accessories offered, Knegt Quality Tractors has the right compact tractor for each sector. Why not visit our show room to see it for yourself?

Knegt tractors Knegt tractors are compact, but strong, robust and flexible, and have the same functions as bigger tractors. As a standard, all Knegt tractors are fitted with: power steering, 4-wheel drive, low/high gearing, locking differential, two hydraulic pumps, 2 double hydraulic valves and continuous PTO with 2 speeds. In addition to all the standard options you can also opt for a CEapproved cab with heating and safety glass, as well as a front loader with a self-levelling system and Quick-release system. All Knegt tractors are also CE-approved and have a street permit valid for all European countries.

Subject to price changes, printing errors and/or typing errors. Prices as stated on www.knegt-international.com are leading. 2 Knegt Tractors

Knegt Tractors 3


The power of Knegt

Knegt 25 HP G2

Knegt tractors are available with three different power sources: a 25 and 30 horsepower 3-cylinder and a 40 horsepower 4-cylinder engine.

Drive train 4WD Dimensions 338 x 156 x 155 cm Rear axle witdh 124 cm Front axle witdh 118 cm Wheelbase 173 cm Rear axle clearence 29 cm Front axle clearance 29 cm Tare weight 1650 kg Turning cycle 230 cm Max speed forward 1 km / 25 km Max speed reverse 1 km / 25 km Engine 3LS25B Cylinders 3 Kw / HP 22.1 / 30 Consumption 215 g / kw / h Rpm 2350 rpm

The Knegt 25 HP has a maximum lifting capacity at the ball ends with horizontal arms of 600 kg. Front loader lifting capacity 500 kg*.

The Knegt 30 HP has a maximum lifting capacity at the ball ends with horizontal arms of 600 kg. Front loader lifting capacity 500 kg*.

The Knegt 40 HP has a maximum lifting capacity at the ball ends with horizontal arms of 1000 kg. Front loader lifting capacity 600 kg*. *If fitted with a front loader!

E 8.950,-* *excl. VAT ** depending on the tire selection

4 Knegt Tractors

Bore x stroke 85 x 90,2 mm Engine size 1813 cm3 Clutch type Double Gearbox 4 + 4 x 2 Transmission conic Differential Bevel gear Differential lock jawlock Front tires 6.0 - 12� Rear tires 11.2 - 20� Steering Hydraulic powered Brakes Discs 3-Point hitch lifting capacity 496 kg 3-point hitch Category 1 PTO rpm tpm 540 / 1000

Knegt Tractors 5


Knegt 30 HP G2

E 10.450,-* *excl. VAT ** depending on the tire selection

6 Knegt Tractors

Drive train 4WD Dimensions 338 x 156 x 155 cm Rear axle witdh 124 cm Front axle witdh 118 cm Wheelbase 173 cm Rear axle clearence 29 cm Front axle clearance 29 cm Tare weight 1190 kg Turning cycle 230 cm Max speed forward 1 km / 27,5 km Max speed reverse 1 km / 27,5 km Engine 3LS30B Cylinders 3 Kw / HP 22.1 / 30 Consumption 220 g / kw / h Rpm 2350 rpm

Knegt 40 HP G2 Bore x stroke 90 x 95 mm Engine size 1813 cm3 Clutch type Double Gearbox 4 + 4 x 2 Transmission conic Differential Bevel gear Differential lock jawlock Front tires 6.0 - 12” Rear tires 11.2 - 20” Steering Hydraulic powered Brakes Discs 3-Point hitch lifting capacity 496 kg 3-point hitch Category 1 PTO rpm tpm 540 / 1000

E 11.950,-* *excl. VAT ** depending on the tire selection

Drive train 4WD Dimensions 351 x 161 x 160 cm Rear axle witdh 140 cm Front axle witdh 120 cm Wheelbase 181 cm Rear axle clearence 37 cm Front axle clearance 40 cm Tare weight 1780 kg Turning cycle 320 cm Max speed forward 1 km / 27,5 km Max speed reverse 1 km / 27,5 km Engine 4LD40B Cylinders 4 Kw / HP 29 kw / 40 HP Consumption 275 g / kw / h Rpm 2400 rpm

Bore x stroke 90 x 100 mm Engine size 2.544 cm3 Clutch type Double Gearbox 4 + 4 x 2 Transmission conic Differential Bevel gear Differential lock jawlock Front tires 7.5 - 16 Rear tires 12.4 - 24 Steering Hydraulic powered Brakes Discs 3-Point hitch lifting capacity 665 kg 3-point hitch Category 1 PTO rpm tpm 540 / 1000

Knegt Tractors 7


Knegt front loader

Knegt Stoll front loader

The robust Knegt front loader is available in two types, the FL250 for the 25hp and 30hp and FL400 for the 40hp. Both the FL250 and the FL400 are standard equipped with parallel guidance, quick change, digging bucket and joystick controls. In addition, the front loader is quickly and easily detached from the tractor.

For many years Stoll has been recognized as a leading worldwide manufacturer of front loaders. Through the concentration, innovation and further developments in this segment Stoll has managed to strengthen its position in recent years. Now Stoll has developed a front loader that suitable for all the Knegt Compact tractors. The Stoll front loader is standard equipped with parallel guidance, quick change system, digging bucket and joystick controls.

FL250 FL400

E 3.245,-* *excl. VAT

8 Knegt Tractors

Structure weight 490 kg Bucket width 152 cm Bucket volume 0,22 m3 Load capacity 440 kg Lift height 242 cm Discharge height 165 cm Digging depth 7 cm Crowd Angle 35º Dump Angle 71º

Structure weight 520 kg Bucket width 170 cm Bucket volume 0,25 m3 Load capacity 500 / 600 kg Lift height 269 cm Discharge height 193 cm Digging depth 15 cm Crowd Angle 35º Dump Angle 72º

E 3.745,-* *excl. VAT

Weight 520 kg Bucket witdh 157 cm Bucket capacity 0,27 m3 Lift capacity 500 / 600 kg Max. hight 244 cm

Max. dump hight 165 cm Digging depth 10 cm Crowd Angle 38º Dump Angle 74º

Knegt Tractors 9


Knegt cab

Knegt deluxe cab

The Knegt cabs have heating, large safety-glass windows for great vision, a large door and 4 work lamps.

The Knegt deluxe cab is a well-insulated cab with a complete range of standard features like: heating, ventilation, two windscreen wipers with wash system, radio with two speakers, 12V outlet, connection for a beacon, four LED work lamps, large safety-glass windows for great vision and a large door.

Dimensions L x W x H 142 x 127 x 154 cm Structure weight 275 kg Windows safety glass Heating yes Ventilation yes windshield wipers yes Seats 1 Indoor lighting yes Outdoor lighting work lights 4x

E 2.750,-*

E 3.750,-* *excl. VAT

10 Knegt Tractors

Dimensions L x W x H 142 x 127 x 154 cm Structure weight 285 kg Windows safety glass Heating yes Ventilation yes windshield wipers yes Seats 1 Indoor lighting yes Outdoor lighting work lights 4x LED *excl. VAT

Knegt Tractors 11


Knegt Pallet Fork

Knegt Tyres

The Knegt pallet fork is suitable for all Knegt front loaders. The front loader quick-change system enables you to attach and remove the pallet fork with one simple action. As a standard, the Knegt pallet fork comes with 2 bale spears.

The Knegt tractors can be fitted with turf tyres. These turf tyres prevent leaving deep tracks in the grass or other surface. Knegt has three different types of turf tyres. The Armour turf tyre (standard), Titan turf tyre (extra wide) and the Galaxy turf tyre (coarse thread). Armour turf tyres

Titan turf tyres

E 495,-*

from E 1.490,-* *excl. VAT

12 Knegt Tractors

*excl. VAT

25/30 hp

40 hp

Armour turf tyres

| E 1.490,- / E 1.600,- excl. VAT

Titan turf tyres

| E 2.255,- / E 2.475,- excl. VAT

Galaxy turf tyres

| E 2.255,- / E 2.475,- excl. VAT

Galaxy turf tyres

Knegt Tractors 13


Tow ball

Knegt Tow Bars

Knegt fixed flail mower

You can add a tow ball, drawbar couplings or 3-point drawbar to your Knegt tractor.

The Knegt flail mowers work by means of a rotating drum with hammer-shaped flails. The flails cut and mulch the crop, which is then thrown out at the rear. These flail mowers are suitable for challenging mowing work and can easily cut high and coarse crops on uneven ground.

Tow ball | E 45,- excl. VAT The Knegt tow hook is easy to attach under the pull bar under the PTO on your tractor. Drawbar Couplings | E 300,- excl. VAT Because of the high mounting point, the Knegt jaw is suitable for e.g. agricultural trailers. 3-point drawbar with tow ball | E 125,- excl. VAT The Knegt 3-point drawbar is mounted to the 3-point hitch and fitted with a tow ball.

3-point drawbar with tow ball

from E 45,-* *excl. VAT

14 Knegt Tractors

Drawbar Couplings

As a standard, all Knegt flail mowers come with a PTO.

Knegt KM 125 | E 1.090,- excl. VAT Knegt KM 145 | E 1.200,- excl. VAT

from E 1.090,-*

Knegt KM 175 | E 1.300,- excl. VAT *excl. VAT

Knegt Equipment 15


Knegt side-shift flail mower

Knegt verge flail mower

The Knegt KMSS flail mower is fitted with a hydraulically operated side offset function which gives 40cm of lateral adjustment, that allows you to mow both behind and to the side of your tractor. This is a useful feature when you have to mow under a fence or under crops.

The Knegt KMV is a flail mower attached to a hydraulic arm which can swivel from +90 to -60 degrees, and which can be used both behind and to the side of your tractor. The verge flail mower can be used for e.g. mowing ditches and roadsides. As a standard, all Knegt flail mowers come with a PTO.

As a standard, all Knegt flail mowers come with a PTO.

Knegt KMSS 125 | E 1.370,- excl. VAT

Knegt KMV 125 | E 1.700,- excl. VAT

Knegt KMSS 145 | E 1.480,- excl. VAT

Knegt KMV 145 | E 1.850,- excl. VAT

Knegt KMSS 175 | E 1.590,- excl. VAT

from E 1.370,-*

Knegt KMVHD 140 | E 2.250,- excl. VAT**

from E 1.700,-*

** KMVHD Category 2 only *excl. VAT

16 Knegt Equipment

*excl. VAT

Knegt Equipment 17


Knegt flail mower collector

Knegt finishing mower

The flail mower collector is designed for the professional user, ideal for sports fields, golf courses and high quality grass areas where a high standard of finish is required. These machine are also ideal for leaf collection. This flail mower work by means of a rotating drum with hammer-shaped flails and collects the mowed crops in the hydraulic reservoir.

The Knegt WB finishing mower turns your tractor into a mowing machine. These mowing machines feature three heavy overlapping blades, very solid right-angle gear box, heavily guided blade holders with central lubrication and 4 wide castor wheels with grease nipples. With the Knegt finishing mower, you can not only mow the lawn, but you can also use it for courser crops.

As a standard, all Knegt flail mowers come with a PTO.

As a standard, all Knegt pasture toppers come with a PTO.

Knegt WB 120 | E 1.040,- excl. VAT Knegt KMO 120 HD | E 1.795,- excl. VAT Knegt WB 150 | E 1.150,- excl. VAT Knegt KMO 160 HD | E 2.145,- excl. VAT

from E 1.795,-* *excl. VAT

18 Knegt Equipment

from E 1.040,-*

Knegt WB 180 | E 1.260,- excl. VAT *excl. VAT

Knegt Equipment 19


Knegt stone burier

Knegt power harrow

The Knegt OF145 stone burier is suitable for tractors from 30 horsepower and upwards. With the stone burier, you can turn a flat rough surface into a seed-ready soil.

The Knegt RE125 power harrow is used to level soil and make it ready for sowing. In addition, the Knegt power harrow is suitable to loosen and level sand in a riding arena, gravel paths and various other types of surfaces.

As a standard, this Knegt stone burier comes with A PTO. The rotary harrow is fitted with 6 rotor heads, each with 2 blades and a crumbler roller, which can also be used to determine the depth. This robust rotary harrow has an extra heavy jig. As a standard, this Knegt rotary harrow comes with a PTO.

E 1.850,-*

E 2.145,-* *excl. VAT

20 Knegt Equipment

*excl. VAT

Knegt Equipment 21


E 1.095,-*

Knegt bale clamp

This Knegt HV5m wood chipper has a 10 cm feed hole and has to be fed manually.

The Knegt BK190 is a bale clamp which has been specially designed for the Knegt compact tractors.

The HV5m wood chipper is suitable for tractors from 18 horsepower upward.

Because of its unique construction, this bale clamp has a low weight of 185 kg.

As a standard, all Knegt wood chippers come with a PTO.

The BK190 is suitable for both round and square bales and has a clamping range of 70 to 190 cm.

E 1.450,-* *excl. VAT

22 Knegt Equipment

Knegt wood chipper

*excl. VAT

Knegt Equipment 23


Knegt fertiliser spreader

Knegt manure scraper

The Knegt KMS300 fertiliser spreader can be used for granular and powdered fertiliser, but also for sand or salt. Fitted with a robust plastic funnel, suitable for 200 litres and adjustable scatter width.

The Knegt manure scraper is ideal to clear away manure with your compact tractor or forklift truck. The manure scraper can be attached to the 3-point, but can also be used with pallet forks.

As a standard, this Knegt fertiliser spreader comes with a PTO.

The stiff rubber scraper removes manure without damaging the surface.

Knegt MS 150 | E 300- excl. VAT Knegt MS 170 | E 325,- excl. VAT

E 660,-*

from E 300,-* *excl. VAT

24 Knegt Equipment

*excl. VAT

Knegt Equipment 25


Knegt mitre snow plow

Knegt arena leveller

The Knegt SSV155 snow plow is ideal to clear away snow with a tractor with a front loader. This snow plow has 7 settings and is fitted with a stiff rubber strip, which pushes snow easily without damaging the surface.

The Knegt arena leveller is fitted with springs with an adjustable working depth, pressure roller and steering device. The steering device ensures that the leveller follows the tractor and the sand is not pushed to the side when going through bends or around corners. The springs loosen up the top layer, after which the surface is levelled with two blades, and then pushed down by the back roller. The springs have an adjustable working depth, and are also ideal for soil with additives.

Knegt BV 180 | E 1.925,- excl. VAT

E 830,-* *excl. VAT

26 Knegt Equipment

Knegt BV 230 | E 2.145,- excl. VAT

from E 1.925,-* *excl. VAT

Knegt Equipment 27


Knegt arena leveller 2.0

Knegt field harrow

The Knegt arena leveller 2.0 is the newest model of Knegt arena levellers. In contrast to the BV180 and BV230, this leveller has 3 blades, 2 rows of springs and a heightadjustable roller.

The Knegt WS200 is a robust field harrow for compact tractors and mini-tractors. With a working width of 200 cm and a very sturdy galvanised frame, this field harrow is one of the most popular models on the market.

The BV200 also has a steering device, to ensure the leveller follows the tractor in bends perfectly. The leveller is suitable for various soil types, such as sand and sand with fibre additives.

Knegt BV 2.0 | E 1.995,- excl. VAT

E 1.995,-*

E 540,-* *excl. VAT

28 Knegt Equipment

*excl. VAT

Knegt Equipment 29


Knegt transport container As a standard, the Knegt transport container is fitted with a removable back plate, tilt function, and is suitable for a 3-point connection category 1.

Knegt service/maintenance Customer service is important for us. That’s why we offer good service and maintenance of our products. Machines can be serviced in our workshop. However, as we sell our products throughout Europe and beyond, we’re not always able to offer service on location.

E 495,-* *excl. VAT

30 Knegt Equipment

Because of the simple but sound construction of our tractors, you will always be able to find a company close to you that can service or repair your Knegt tractor.

Because we assembly our tractors in-house, we have all parts in stock. We can always quickly send any parts needed to the garage or workshop where your tractor is being serviced. We also supply complete service kits with an oil filter, air filter and hydraulic filter. Our service does not end when the warranty period expires! Knegt Tractors 31


Knegt dealer locator. Our dealers are located in these countries.

HEAD OFFICE: Knegt International Habraken 1207 5507 TB Veldhoven the Netherlands +31 (0) 40 2558416 info@knegt-international.com www.knegt-international.com

NL BE

DE

YOUR DEALER AU FR

CH


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.