Electronic Products and Technology September 2011 by Annex Business Media

SCAN HERE

electronic products and technology - SEPTEMBER 2011 electronic products and technology

WIRELESS RFID

WIRELESS

WIRELESS & RFID

RFID

AN EP&T SPECIAL REPORT PAGE 8

Page 13 EMBEDDED PLANET

CONNECTORS Page 16 W.L. GORE

SWITCHES & CIRCUIT PROTECTION Page 26

Publications Mail Agreement No. 40069240 Canada Post: Return undeliverable Canadian addresses to: Business Information Group, 12 Concorde Place, Suite 800, Toronto, ON M3C 4J2 circulation@ept.ca

RFID

WIRELESS

EMBEDDED SYSTEMS & ENGINEERING COMPUTERS

VISHAY INTERTECHNOLOGY

WIRELESS

omega.ca, of Course!

Where do I go for Wireless Measurement and Control Products?

Your single source for process measurement and control products!

Où puis-je trouver des produits de contrôle et de mesure sans fil?

Sur omega.ca, bien entendu!

Votre source unique en produits de mesure et de contrôle des procédés For Use with Monitoring Paint Coating Process Pour utilisation avec processus de surveillance de procedé de revêtement de peinture

Temperature/Relative Humidity/ Infrared/ Thermocouple Bench Top Handheld Meter with Laser Dot/Circle Sighting, Data Logging and Wireless Sensor Probe Option Thermomètre/hygromètre à infrarouge portatif pour l’établi Mire à point/cercle laser, enregistrement de données et sonde sans fil en option

*RH511 Series/Série Starts at/Á partir de $ 355

Visit/Visitez omega.ca/rh511

Miniature Data Logging Connectors Record and Store Over 65,000 Data Readings Connecteurs miniatures d’enregistrement de données Enregistrent et stockent plus de 65 000 lectures **MWTC-D Starts at/Á partir de $89

Miniature RFID Data Loggers and Readers Feature Economical, Fast, Accurate Wireless Data Retrieval and Storage Enregistreurs et lecteurs RFID miniatures sans fil offrant la reprise et le stockage rapides, économiques et précis des données **OM-84 All Models $90 pkg of 5

Visit/Visitez omega.ca/mwtc-d

Visit/Visitez omega.ca/om-84 Universal Wireless RS232 to USB Transceiver Émetteurs-récepteurs WRS232-USB universels RS232 à $159 USB sans fil For Both RS232 and USB Modules Pour les modules RS232 et USB

! E E R F te g ra tu i

Visit/Visitez omega.ca/wrs232

Universal Wireless Transceiver Module Modules de transmission et de réception universels sans fil **UWTC-REC6 $69 Visit/Visitez omega.ca/uwtc-rec6

Wireless Relative Humidity/ Temperature Transmitter Transmetteur sans fil d'humidité relative/température UWRH-2 Starts at/Á partir de $165

Visit/Visitez omega.ca/uwrh-2

**UWTC-2 Starts at/Á partir de $135 Temperature-to-Wireless Connector/Converter System Connecteur/convertisseur de température à sans fil Visit/Visitez omega.ca/uwtc

Over 150 full color pages covering 7 product categories in automation, sanitary, temperature, electric heaters, wireless/data acquisition, pressure and flow Plus de 150 pages en couleurs couvrant les 7 catégories de produits suivantes; automatisation, sanitaire, température, éléments chauffants électriques, acquisition de donnée/sans fil, pression et débit

For Sales and Service, Call TOLL FREE pour les ventes et le service - composez

Dilbert © United Feature Syndicate, Inc.

http://ept.hotims.com/34485-1

*BREVETÉ *PATENTED **PATENT PENDNG **BREVET EN ATTENTE

976 Bergar Laval, Québec Canada H7L 5A1

Because of transmission frequency regulations, these wireless products may only be used in the United States and Canada (915 mHz models) or Europe (868 mHz models). En raison de la réglementation des produits de fréquences de transmission, ces produits ne peuvent être utilisé qu' aux Etats-Unis et aux Canada (915 modèles MHz) ou en Europe (868 modèles mHz).

Shop Online at

magasinez en ligne à

e d i t o r i a l electronic products andtechnology technology electronic products and Volume 33 Number 6

September 2011

Stephen Law Editor 416.510.5208 slaw@ept.ca

David Boss, P.Eng. Contributing Editor

Sohail Kamal

West Coast Correspondent

Joanna Malivoire

Peter Loney

Account Manager Direct: 866.868.7089 jmalivoire@ept.ca

Publisher 416.510.5207 pdloney@ept.ca

Reinventing the manufacturing dream in Canada Every region in Canada has lost electronics manufacturing jobs in some fashion to cheaper, low-cost manufacturing alternatives overseas. To curb this manufacturing job loss tendency and to attract, and retain, manufacturing functions at home, experts say it’s time to refine what could, again, support and encourage a re-birth of OEM/CEM activity. Canada has historically relied on the United States for approximately 70% of its electronics manufacturing exports, but the sector’s share of US trade is decreasing due to competition from low-cost developing countries. Canada’s cost advantage has also eroded with the rising Canadian dollar. Fortunately, there are many opportunities for increasing sales elsewhere that Canadian companies could take, according to a thorough examination of the electronics manufacturing sector by McKinsey & Company, global management consulting firm. Canada’s electronics manufacturing sector will probably continue to lag the sector’s global growth unless Canadian players, like their competitors in other higher-cost economies, are able to specialize more and refocus their product mix on higher-value goods. Looking forward, it would be critical for Canadian firms to specialize in areas that show growth potential and would leverage the country’s skilled workforce, leading engineering institutions, and capabilities in highervalue activities like R&D and design. Over the years, Canada has successfully developed regional clusters like Waterloo and Ottawa, where government organizations, corporations, and education centres collaborate to create a stimulating infrastructure to support the electronics sector’s development and growth. What would it take to create additional clusters with similar scale and scope?

If Canada aspires to become more flexible in the types of products it chooses to produce and the areas of the electronics value chain it chooses to compete in, it will need to determine how to redeploy labour to where it will be most productive. This would require putting in place joint public and private channels to effectively retrain and redeploy labour to higher-value-added activities within the sector or in other high-productivity sectors. Canada has initiatives in place to support labour training programs. However, the next step is to move beyond general support for skills applicable across labour bodies to targeted redeployment programs focused on matching employees to specific promising sectors. Venture capital is an important element in Canadian industry. For the electronics manufacturing sector, venture capital is particularly significant as it provides crucial support for the innovation and renewal required to make electronics manufacturing a competitive sector. Revitalizing Canada’s electronics manufacturing sector will require resolve and focus from multiple stakeholders in both the public and the private sectors and include public-private partnerships. They will need to determine where future opportunities are likely to lie and then find ways for Canadian firms to capture them. The rest of the sector can look to its home-grown global champions like RIM for ideas – and reasons for optimism. Stephen Law, Editor slaw@ept.ca Follow me on Twitter http://twitter.com/#!/EPTmagazine

intelligent EMI/RFI protection for your application

CONEC Filter Connectors

Tracy Lelyk

Art Director Group Administrator 416.510.5120 tlelyk@ept.ca

Tracey Hanson

Production Manager 416.510.6762 thanson@bizinfogroup.ca

Bona Lao

Subscription Inquiries 416.442.5600 ext 3552 blao@bizinfogroup.ca

Phyllis Wright

Print Production Manager

Bruce Creighton President

Alex Papanou Vice President

Tim Dimopoulos

Executive Publisher

EP&T (Electronic Products & Technology) is published nine times per year: Monthly in February, May, August, September, October, Bi-Monthly January/February, March/April, June/July, November/December by: 12 Concorde Place, Suite 800, Toronto ON M3C 4J2 info@ept.ca Website: www.ept.ca Tel: 416.442.5600 Fax: 416.510.5133 Sales: 416.510.5207 • Editorial 416.510.5208

ISSN 0708-4366 (Print) • ISSN 1923-3701 (Online) Subscription Rates: Canada: $52 per year, US: $78 per year, International: $125 per year

Editorial Purpose: Electronic Products & Technology provides timely, comprehensive coverage of the latest worldwide developments and trends in electronic products, equipment and systems, and interprets their significance to manufacturers and end-users in the Canadian marketplace. Publications Mail Agreement No. 40069240 Canada Post: Return undeliverable Canadian addresses to: EP&T Circulation Dept., 12 Concorde Place, Suite 800, Toronto, ON M3C 4J2, Subscription Inquiries: 416.442.5600 x3552 • circulation@ept.ca EP&T (Electronic Products & Technology) assumes no responsibility for the validity of claims in items reported. © 2011 This publication or any part of it may not be reproduced, stored or transmitted in any form whatsoever without the express written consent of the publisher. From time to time we make our subscription list available to companies and organizations whose products and services we believe may be of interest to you. If you do not want your name to be made available, please contact EP&T with your subscription number. Printed in Canada We acknowledge the financial support of the Government of Canada through the Canada Periodical Fund (CPF) for our publishing activities.

SCAN HERE

www.pmr-werbung.de 0 8/11/11104

BIG Magazines LP, a div of Glacier BIG Holdings Company Ltd.

Integration of connectors with filter saves space on the printed board and reduced EMI/RFI problems. CONEC offers a wide range of connectors with single and multi-level filter technology. Today CONEC connectors are a compact component of optimal screening concepts. • Filter D-SUB connectors • Filter Combination D-SUB connectors • Filtered 7W2/9W4 Connectors for µTCA Power Supply • Filter Adapters • Filter Plates • Customer Specific Filter Applications • IP67 protected Filter Connectors

for EP&T’s Digital Edition CONEC Corporation

CONEC 125 Sun Pac Blvd. 343 Technology Drive Brampton • Canada L6S 5Z6 Garner, NC,Ontario USA 27529 Tel. +1 Tel. +1 905 919 790 4602200 8800• Fax +1 905 790 2201 Fax +1info@conec.com 919 460 0141 E-Mail E-Mail info@conec.com

Scan Here

w w w. c o n e c . c o m www.conec.com

http://ept.hotims.com/34485-2

003

400

representatives and distributors

NEWSWATCH N E W S WAT C H NEWSWATCH electronic products and technology • september 2011

Flextronics moves to solar production with MEMC and SunEdison subsidiary

Spectris acquires Omega Engineering

Electronics Manufacturing Services (EMS) provider Flextronics Intl. anticipates the creation of 400 jobs to ramp production of MEMC solar panels at its Newmarket ON facility. Working in conjunction with MEMC Electronic Materials Inc. and SunEdison, its solar energy subsidiary, Flextronics will produce a new line of MEMC photovoltaic (PV) modules that will be used by SunEdison and its channel partners for solar PV projects. The job creation is a direct result of the 60% domestic content requirement of Ontario’s Feed-in Tariff (FIT) Program. MEMC and Flextronics’ panel manufacturing facility signals a long-term investment in the region to help facilitate a sustainable green economy for the foreseeable future. In addition to job creation through investments in solar panel and racking manufacturing, SunEdison’s Toronto office has grown from two full-time employees in November 2009 to more than 50 employees engaged in the delivery of both ground-mount and rooftop solar projects across the province.

Spectris plc, a productivity-enhancing instrumentation and controls company, has signed an agreement to acquire Omega Engineering Inc., a privately-held business that provides a broad range of process measurement and control instrumentation to customers in industrial and academic markets. Selling directly to end-users in these sectors via catalog, telephone and Internet, Omega has a differentiated customer service model with emphasis on providing high levels of quality, availability, customization and speed of delivery to a large base of customers who want a convenient and reliable source for their small-scale process and automation needs and R&D requirements. Omega is a leading integrated, international, single-source supplier of highly engineered products and customized solutions in the process measurement and control industry, with a very strong brand, high levels of repeat business, a defensible and resilient business model and an unmatched reputation for meeting customer needs.

Global EMC moving to larger facility

Neutronics serves up Altium’s redefined board-level design Ottawa-based representative of semiconductor components, digital prototyping CAD and electronic design software Neutronics Solutions Ltd., is now representing Altium’s new AD10, aimed at meeting the electronic design needs of a connected future. In addition to the milestone release of Altium Designer 10, the firm is announcing Altium Vaults and AltiumLive. Altium Vaults is new technology at the heart of Altium Designer 10’s new design data management functionality. AltiumLive is an online ecosystem for electronics design professionals that will connect designers with collaborators, suppliers, manufacturers and in the future, customers.

Provider of compliance testing Global EMC Inc., is expanding into a new 23,000 sq. ft. facility in Stouffville ON, housing both product safety and EMC testing operation. The move will be supported by a significant investment in state of the art test equipment, according to company president Garry Lee. The firm is installing two new 3-meter semi-anechoic EMC chambers, 1 pre-compliance immunity chamber, as well as a 10-meter Open Area Test Site to further augment its testing services. “This will complemented with our new expanded Military testing,” Lee says. “With completion of this new facility, Global EMC will provide more EMC services and larger capacity to meet our clients’ needs including military testing, wireless (FCC & IC) and environmental testing such as vibration, Hi-Lo temperature and HALT/HASS.”

Phase 2 construction set for MaRS Centre RIM’s BlackBerry honoured with stamp Research In Motion’s BlackBerry device is among four significant Canadian inventions to be honoured by Canada Post, soon to be featured on a stamp. RIM’s iconic wireless handheld messaging device joins the electric oven, the electric wheelchair, the cardiac pacemaker and with the release of four 59-cent domestic-rate commemorative stamps in the Canadian Innovations series.

Circuit Breakers l Thermal Overcurrent

Tektronix acquires Optametra Tektronix Inc., Beaverton OR, has acquired Optametra, LLC, a test & measurement firm focused on coherent test for 100G and beyond. Optametra launched its 40G Coherent Lightwave Signal Analyzer in March 2009 and followed up with a 100G later that same year. The company is a pioneer in coherent test, and continues to lead with products and customer support in the R&D and manufacturing spaces. The Optametra Signal Analysis Suite provides an advanced information display, modulation formats and a wide linewidth tolerance.

l Thermal-Magnetic Overcurrent l Hydraulic-Magnetic l Magnetic Overcurrent l High Performance l Electronic Overcurrent Protection

E-T-A is a market leader in the design, development and m a n u fa c t u r e o f c i rc u i t b re a ke rs fo r e q u i p m e nt protection. These products are suitable for a wide range of applications, and are worldrenowned for their quality and reliability - protecting both man and machine.

IRWIN Industrial is proud to be an authorized distributor of E-T-A products

Connectors & Cables Mechanical Hardware Optoelectronics Power Products Printers & Labelling Protection, Suppression & Shielding Switches & Relays Thermal Management Wire Management

Toronto’s MaRS Discovery District innovation centre will commence with the second phase construction of its state-of-the-art convergence centre - MaRS Centre Phase 2. Focused on accelerating innovation and building Canada’s next generation of highgrowth companies, MaRS Centre has partnered with the Province of Ontario and continuing its relationship with Alexandria, a leading life science developer and owner. The added financial support will enable MaRS to accelerate its role as a catalyst of innovation in the launching and growth of new science and technology businesses, according to Ilse Treurnicht, CEO, MaRS Discovery District. The current MaRS Centre is at full occupancy, and cannot meet the increasing demand for space from both institutional and business tenants. MaRS Centre Phase 2, directly adjacent to the existing facility, will offer tenants co-located technologically advanced laboratory and office space; award-winning communications and information technology capabilities; access to a large multi-function conference centre; and collaboration opportunities with other MaRS tenants and partners across Canada and around the globe.

Electronic Components & Hardware

http://ept.hotims.com/34485-3

LeCroy strikes global disty deal with Mouser; Disty links with Cree lighting LeCroy Corp., Chestnut Ridge NY, manufacturer of oscilloscopes and serial data solutions, has reached an international distribution agreement with Mouser Electronics. Mouser’s state-of-the-art global distribution network will place LeCroy oscilloscopes, arbitrary function generators and logic analyzers within easy reach of electronic design engineers and production equipment buyers in nearly every corner of the world as well as expand the support network for LeCroy products. LeCroy is committed to working with Mouser Electronics in all key geographical markets to provide a one stop shop capability for test equipment needs. “LeCroy’s heritage of technical innovation is without question,” says Keith Privett, VP electromechanical, power & test at Mouser. “As a distributor committed to supplying the newest advancements in technology, we consider LeCroy a partner that shares our business philosophy of delivering What’s Next to design engineers across the globe.” “Not only will our partnership with Mouser help us to continue to grow internationally, we are equally pleased to have a global distribution partner that’s as committed to quality customer service and delivering innovation in support of new design as we are,” adds Roberto Petrillo, LeCroy worldwide VP sales. Mouser also recently signed a distribution agreement with Cree Inc. a leading provider of LED lighting and silicon carbide (SiC) power products. The global agreement enables lighting designers worldwide to quickly find, compare, select, and order Cree’s latest products, including their innovative line of high brightness LEDs, LED modules and power products.

EPTECH draw winners announced EPTECH show draw winners of RIM Playbook tablet devices have been announced. The winners names were drawn from those that attended the shows earlier this year. They are as follows: Calgary/Edmonton: Lyle Smitham, ITRES Research; Montreal/Toronto: Drew Miller, Thornhill Research; and Ottawa/Vancouver: Gurpal Gill, TASC Systems Inc. An additional tablet computer from Research In Motion will be up for grabs to those attending EPTECH shows this Fall in Quebec City, Halifax and Mississauga. Don’t forget to fill out your draw ballot for your chance to win! Register online at www.ept.ca/eptech/ to attend the show.

full online product listings at.ept.hotims.com

http://ept.hotims.com/34485-4

products on review

electronic products and technology •september 2011

75V input brick Bus converters deliver 98% efficiency

Green 250W power supplies combine 93% efficiency with ErP compliance

IBC054 Series of wide-input range VI BRICK Bus Converters are available as drop-in upgrades for industry standard 5:1 and 4:1 converters. The eighth and quarter bricks achieve up to 98% efficiency from a 36V to 60V input voltage range at power levels from 300W up to 750W, with 2,250Vdc isolation from input to output. Products provide a transient surge capability of 75 Vin for 100 mS for telecom, power-over-Ethernet and other applications. VICOR

GWS250 line of ‘green’ 250-watt ac-dc power supplies comply with the European energy saving requirements of the ErP (Energy related Products) Directive. Products combine high efficiency, high power density and low standby power consumption (<0.5W, no-load) with a 5-year warranty. Convection-cooled units provide a 4.1 x 7.8 inch footprint and less than 1U height (1.61”). Rated at 250W, product series is offered in four models with nominal outputs of 12V, 24V, 36V and 48V. TDK-LAMBDA AMERICAS

http://ept.hotims.com/34485-50

http://ept.hotims.com/34485-53

Digital storage oscilloscopes facilitate USB interface GW Instek GDS-1000-U and GDS-1000A-U digital storage oscilloscope series of general purpose 2-channel oscilloscopes provide USB interface. Units also include add-on new firmware, such as Go/NoGo, Data Logger and Zoom FFT (GDS-1000A-U only). The bandwidth of entry level models have been raised up from 25MHz to 50MHz for the GDS-1000-U series, and from 60MHz to 70MHz for the GDS-1000A-U series. TRADEPORT

40G AdvancedTCA backplanes based on IEEE standards 40G AdvancedTCA (ATCA) Backplanes are based on the design principles of IEEE 802.3-2008 and IEEE 802.3ba-2010 standards. The 4 channels x 10 Gbps units provide a controlled-impedance stripline design of 18 layers in a Dual Star routing configuration. The backplane results were achieved using extensive pre-layout and post-layout simulation studies. Units provide dual shelf manager connectors in slot 0 for redundant IPMB implementation and up to 400W/slot 48Vdc distribution to each slot. ELMA BUSTRONIC

http://ept.hotims.com/34485-51

http://ept.hotims.com/34485-54

Surface mount point of load (PoL) dc-dc converters are ruggedized Murata OKI-T 3-W32 series of surface mount point of load (PoL) dc-dc converters can accommodate a very wide input voltage range from +9 to 32Vdc. Product provides the flexibility of using one part to cater for both nominal input voltages. With a typical efficiency of 89%, modules are fully compatible with the Distributed-power Open Standards Alliance (DOSA) package specifications and measure 11.9 x 20.8 x 8.5mm. The non-isolated series offers a 3 Amp programmable output voltage that can be set from +0.75 to +4.5Vdc. MURATA

Thermocouple simulators check and calibrate instruments CL540ZA series of thermocouple simulators check and calibrate all thermocouple instruments. Unit provides easy-to-read backlight display, even in the darkest areas of the plant. Products works with 14 thermocouple types: J, K, T, E, R, S, B, N, G, C, D, L (J-DIN), U (T-DIN) and P (Platinel II). Units can be used to calibrate a thermocouple input instrument and can be used for measuring temperature in a manufacturing facility. OMEGA http://ept.hotims.com/34485-55

http://ept.hotims.com/34485-52

Need True 3D

Inspection

Grow with the 3D Measurement Leader Koh Young Technology has set a new standard in 3D measurement and analysis tools for ultimate process optimization and higher yields.

SPI aspire2: the 100% real time 3D Paste Measurement based on the Koh Young patented shadow-free measurement technology.

Koh Young’s patented true 3D inspection technology out-performs all others. www.kohyoung.com Koh Young is your partner committed in building better profitability through real process quality improvement

AOI Zenith: 3D AOI system measures the true profilometric shape of components, solder joints, patterns, and even foreign material on assembled PCBs with true 3 dimensional measurement (IPC-A-610 acceptability standards), overcoming the shortcomings and vulnerabilities of 2D AOI.

Represented in Canada by:

COMTREE inC.

ON, MB, SK, AB and BC

Tel: 905.673.7777 www.comtreeinc.com

Kits for PC/104, PC/104Plus modules mount easily Keystone Electronics series of hardware mounting Kits for PC/104 and PC104-Plus Bus drives are suitable for limited space design/installation applications. Engineered to ease assembly of new modules and multi-board stacks, kits may be used with any of the more than 100 different PC/104 modules available in the marketplace. EMX ENTERPRISES

Miniature infrared LEDs boost output ChipLED SFH 4053 infrared emitter (IRED) combines tiny dimensions with high efficiency, suiting lowprofile all-in-one computer, tablet PC and laptop displays. Devices are housed in a low-profile frame and measure 0.5 x 1 mm, combined with a height of 0.45mm in industry standard 0402 (length/width). OSRAM OPTO

http://ept.hotims.com/34485-56

http://ept.hotims.com/34485-57

Power MOSFETs manage low power applications PQFN 2mm x 2mm and PQFN 3.3mm x 3.3mm low power MOSFET packages integrate two HEXFET MOSFETs utilizing firm’s latest silicon technology to deliver a high density, cost effective solution for low power applications. A pair of power MOSFETs are in each package, as devices offer the flexibility of either common drain or half-bridge topologies. Devices deliver ultra-low losses, such as IRLHS6276, which provides two MOSFETS each with a typical on-state resistance (RDS(on)) of 33 milliohms in only a 4 mm2 area. INTERNATIONAL RECTIFIER http://ept.hotims.com/34485-58

Crimp tool terminates AMP-style modular plugs PROAMP crimp tool terminates AMP-style modular plugs. Product’s design assures consistent, repeatable terminations every time for high performance installations demanding quality and integrity. PLATINUM TOOLS http://ept.hotims.com/34485-59

nORThTOuCh CanaDa inC.

NB, PEI, NF, NS, QC and Ottawa Region

Tel: 514.630.5762 www.northtouch.com

http://ept.hotims.com/34485-5

full online product listings at.ept.hotims.com

mouser.com

Semiconductors and electronic components for design engineers.

We’ve got what design engineers need. The future. You’ll nd the newest products for your newest designs. Get what’s next at Mouser.

Scan Here

mouser.com

Mouser and Mouser Electronics are registered trademarks of Mouser Electronics, Inc. The Newest Products for Your Newest Designs is a registered trademark of Mouser Electronics, Inc

electronic products and technology • september 2011

Wireless & RFID

Wireless solutions update

technology, but rather a collection of solutions from the electronics, telecom and software industries. This means there are more stakeholders affected by its success.

Steady market growth

Standardization of machine-to-machine technologies Machine-to-machine (M2M) communication, which has the potential to connect billions of machines and objects, can no longer rely on the existing cellular networks designed mainly to support communication between humans. As the full potential of M2M communication is gradually being tapped into, a multitude of new electronics, telecommunication and information technologies are

being developed to improve this communication. This has lead to the development of various technology standards, which now raise the need for global compatibility and collaboration between standardization initiatives. From its modest wired applications beginnings, the surge in M2M applications has been the result of wireless communication solutions, which use wireless and satellite infrastructures to create open communication environments for machines. M2M is not one single growing

Murata Innovations RFID MAGICSTRAP® LXMS31 s/b Series  Gen2 compliant RFID tag used for PCB tracking.

 Can also be adopted as an antenna-less RFID tag using its unique characteristics for near field detection.

Internet Appliances

Bluetooth® Module - LBMA46 series  One of the smallest Bluetooth® modules available at 6.6 x 6.1 x 1.5mm.  Only requires an antenna on the RF front end and a host processor through UART interface on the digital side.

Home Automation

 This module is in production and available for sample orders.

Wi-Fi® Front End Modules - MDFE2PFA Series  2.45GHz (-022) and 5GHz (-023)  Small size: 2.5 x 2.5 x 0.4mm  802.11a/b/g/n Wi-Fi® and Bluetooth®  Single packages integrate Murata’s power amplifier, low noise amplifier and switching product.

Smart Energy

Wi-Fi® Module - LBWA18 series  802.11b/g module  Measures just 8 x 8 x 1.4 mm.  Implements the RFIC and baseband functions as well as filtering, voltage regulation, and reference clock.

Healthcare Applications

 SDIO and SPI interfaces allow for flexible connections in typical handheld devices.

 The industry’s smallest, fully integrated ZigBee module at just 400mm2. ®

 +20dBm output power and 1MB of serial flash memory for a wide range of applications.

www.murata.com http://ept.hotims.com/34485-6

Standardization is key to future M2M solutions are slowly becoming mainstream and the continuous success of M2M technologies relies on the standardization efforts of the various protocols. Standards serve as the foundation for the development of innovative solutions that will enable M2M to evolve beyond industrial applications and be used in smart grids, security solutions, home appliance connectivity and public infrastructures. The emerging array of smart devices is completely dependent on the development of suitable standards that allow them to communicate easily. To ensure the interoperability of M2M solutions several dozen national and international committees and alliances have formed

• Telecommunications Industry Association’s (TIA) TR-50 Smart Device Communications engineering committee - effort to develop a multi-part standard for Smart Device Communications • IEEE 802.15.4-2009 standard China Communications Standards Association’s (CCSA) TC10, • ZigBee IP Stack • 3GPP SA2NIMTC (TR23.888) • European Telecommunications Standards Institute’s (ETSI) TC M2M • Current work by the CTIA CPWG ERP M2M sub group While all these standardization efforts lay the path for future innovations, there is also a risk that they will lead to conflicting or redundant standards.

Increased coordination of standardization efforts needed The development of globally compatible standards is seen as key in enabling the further growth of M2M technologies. This will require that work is done to ensure global coordination and collaboration exists between standards organizations. Several standardization groups are beginning to coordinate their activities to ensure their work pushes M2M technologies in a common direction. This effort was reinforced at the 15th meeting of the Global Standards Collaboration (GSC-15) in Beijing. Taking place in September 2010 the event saw the creation of the M2M Standardization Task Force (MTSF). This task force was created with the goal of facilitating global coordination and harmonization of M2M standardization work. Such efforts aim to ensure the future M2M ecosystem with its various interfaces will develop harmoniously. For more information on inspection, verification, testing and certification for electrical, electronic and telecommunication equipment from SGS, go to http://ept.hotims.com/34485-67

SCAN HERE

High bandwidth optical waveform analysis boosts accuracy DCA system impulse response correction (SIRC) measurement solution, for optical transmitter compliance testing on firm’s 86100D digital communications analyzer, enables multimode optical receivers with bandwidths in excess of 25GHz and singlemode receivers with near 100-GHz bandwidths. Unit provides an advanced calibration capability that can boost the measurement bandwidth of the 86105D from 20GHz to more than 25GHz. SIRC also enables the 86105D to be configured as a multimode reference receiver for standards-based compliance testing at both 25 and 28Gb/sec rates. AGILENT

ZigBee® Modules - SyChip SN3020 hi-power module

MWS_EP&TAd_Aug2011_V2.indd 1

“M2M is not one single growing technology, but rather a collection of solutions from the electronics, telecom and software industries” The M2M markets that enjoy the fastest growth rates are those for: vehicle telematics, smart buildings, healthcare solutions and connected buildings. The growth of these specific sectors has been supported by governmental projects and legislation focused on these areas and also by the emergence of M2M based initiatives from some of the world’s leading IT and telecom companies.

for Your Wireless Designs

 Easily integrated into the PCB allowing key data to be stored and retrieved throughout the lifespan of that product.

M2M related technologies have established themselves as viable solutions for many industries and have immense growth potential. In 2007 shipments of cellular M2M devices amounted to 11-million units worth approximately $8.5-billion while the rapid growth is estimated to reach 61 million modules by 2012. The rapid market growth of M2M solutions has also been facilitated by significant drops in the cost of the various modules used, as well as the emergence of innovative technologies such as Edge Intelligence that allows real-time data capture and analysis.

technical groups charged with the development of M2M standards. Some of these initiatives focus on further developing existing standards to suit M2M growth needs, while others are focusing on the creation of dedicated standards. Some of the most recent initiatives include:

http://ept.hotims.com/34485-68

8/15/2011 2:53:06 PM

full online product listings at ept.hotims.com

wireless & RFID

electronic products and technology • september 2011

Miniature SMD quartz crystals combine low profile with wide frequency range Series of ultra-miniature SMD quartz crystals with wide frequency ranges of 12MHz to 25MHz enable smaller end products. Models XT23 and XT35 provide ceramic packages measuring 3.2mm by 2.5mm and 5.0mm by 3.2mm, respectively. Both devices deliver a low profile of 0.8mm. With a frequency tolerance of ± 30ppm at 25C, and compact size, the devices operate over a temperature range of 0C to + 70C, with a temperature stability of ±50ppm. VISHAY INTERTECHNOLOGY http://ept.hotims.com/34485-69

dPMR system in a chip targets license free radio CMX8341 single chip Digital Private Mobile Radio Baseband Processor is targeted directly at licence free digital PMR radios conforming to the ETSI standard, TS102 490. Device provides dual mode analogue/digital PMR operation, high integration, low power consumption and small size and its 6.25kHz digital mode supports FCC part 90 narrowbanding requirements. This highly integrated device offers direct connection to the microphone, speaker and RF transceiver section of the radio. CML MICRO http://ept.hotims.com/34485-70

Low profile dc-dc converter is fully isolated UEE series of fully isolated, open frame dc-dc converters typically provide up to 90% efficiency and deliver a single 3.3Vdc output. Measuring 58.4 x 22.9 10.16mm, product series meets all the mechanical and electrical requirements of the industry standard DOSA compliant 1/8th brick package. Complying with the worldwide requirements for telecommunications network voltage (TNV) applications, Devices have a nominal input voltage of 48Vdc and can accommodate a wide input range from 36 – 75Vdc. Model UEE3.3/15-D48 provides a 15 Amp output and model UEE-3.3/30-D48 a 30 Amp output. MURATA POWER SOLUTIONS http://ept.hotims.com/34485-74

Low noise MMIC VCO comes with buffer amplifiers RFVC182X family of narrowband MMIC voltage controlled oscillators (VCOs) with integrated RF output buffer amplifiers boost temperature, shock, and vibration performance. Devices are suitable for applications in the 4.45 to 8.7GHz frequency range. Products provide POUT >8dBm from a +3V single supply and deliver low phase noise performance with minimum power consumption. Each VCO comes in a compact, RoHS compliant 4.0 x 4.0mm QFN package. RFMD http://ept.hotims.com/34485-75

Two-chip RF bundle enables long-range wireless connectivity Sub-1 GHz RF value line of semiconductors provides developers low-cost connectivity solutions for sub-1 GHz RF applications. Product family launched with the CC115L transmitter, CC113L receiver and CC110L transceiver. Devices are based on firm’s Sub-1 GHz CC1101 RF technology, and are pin-, register- and code-compatible, as well as backwards compatible with existing sub-1 GHz systems. TEXAS INSTRUMENTS http://ept.hotims.com/34485-71

VCO boosts modulation port for transmitter Apps CVCO55FLM-0137-0171 operates from 137MHz to 171MHz with a control voltage range of 0.5V~4.5V. Device provides a typical phase noise of -118 dBc/Hz @ 10KHz offset and has excellent linearity. Products contain an extra modulation port (TX modulation), making the family suitable for transmitter applications. The modulation port has a negative slope and a typical modulation sensitivity of -25KHz/V. CRYSTEK http://ept.hotims.com/34485-72

Direct RF-sampling ADCs enhance radio architectures ADC12Dxx00RF family of analog-to-digital converters (ADCs) directly sample RF signals beyond 2.7GHz, with third-order intermodulation distortion (IMD3) up to -71 dBc and sampling at up to 3.6 Gigasamples per second (GSPS). Product family includes five 12-bit ADCs that enable system designers to eliminate multiple intermediate frequency (IF) down-conversion stages including amplifiers, mixers and filters. A single device replaces entire radio signal path subsystems, drastically reducing bill of materials (BOM) cost, board size and weight in 3G/4G wireless basestations. NATIONAL SEMICONDUCTOR http://ept.hotims.com/34485-73

If the TDK-Lambda insert is missing from this issue, please go to: http://ept.hotims.com/34485-7

w w w. e p t . c a

wireless & RFID

electronic products and technology • september 2011

Mini signal generator performs up to 20GHz

33GHz oscilloscope achieves peak measurement accuracy

Models LMS-203 and LMS-163 join Lab Brick product line that together cover frequency ranges from 8 to 20GHz. Both provide low phase noise, 100 microsecond switching time and fine 100Hz frequency resolution. LMS series provides operating features such as phase-continuous linear frequency sweeping, optional internal/external pulse modulation, and a selectable internal/external 10 MHz reference. Typical spurious for the two models is at -80 dBc, with typical harmonics of -40 dBc and subharmonics at -25 dBc. VAUNIX TECHNOLOGY http://ept.hotims.com/34485-76

Current compensated data line filters suit RF apps WE-CNSW HF series of current-compensated SMD data line filters provide a high common-mode attenuation and have no influence on the highfrequency differential data signals, through its special winding geometry. Products are designed for operating temperatures of -40 to 125C. Three versions are available: 67Ω type for USB 3.0, 90Ω for HDMI, and 120Ω for LVDS and USB 2.0. Catalog components are available in stock. Applications include USB 2.0 and 3.0 FireWire, LVDS, HDMI and other high speed data lines. WURTH ELECTRONICS MIDCOM http://ept.hotims.com/34485-77

FM, ZigBee analysis software added to RF modular instruments PXI 3030 Option 111 generic measurement software suite enables users to perform a variety of generic analyses of analog and digital modulated signals on firm’s PXI 3000 Series of RF modular instruments. Product supports the analysis of broadcast FM signals as well as Phase Shift Keying (PSK) modulation types including Binary Phase Shift Keying (BPSK), Quadrature Phase-Shift-Keying (QPSK), and Offset-Quadrature Phase-Shift-Keying (OQPSK) for example as used by ZigBee devices. AEROFLEX

DPO/DSA70000D Series oscilloscope includes four models with real time sampling rates up to 100GS/s on two channels and 33GHz analog bandwidth on four channels. Models for 25 and 33GHz bandwidths provide the industry’s highest level of measurement accuracy for today’s fastest electrical signals across multiple channels. Incorporating IBM’s 8HP silicon germanium (SiGe) chipset, product has integrated high-speed bipolar transistors directly on the same die as standard CMOS, enabling it to deliver fast rise time on multiple channels. Such highsensitivity, low noise measurement capabilities are required for accurate characterization of high speed optical, RF and serial data measurements beyond 20 Gb/s data rates. Product achieves a number of industry firsts designed to benefit customers working on high performance systems and silicon, according to Chris Loberg, senior technical marketing manager. “This unit demonstrates the industry-best rise time performance for accurate characterization of sub 20 picosecond rise time signals. This helps customers develop leading-edge silicon with the most accurate oscilloscope in the industry,” Loberg says. TEKTRONIX http://ept.hotims.com/34485-81

LTE SMT antenna boosts efficiency in small form factor PA.700.A Viking LTE, septa-band, surface mount antenna (SMT) delivers more than 70% efficiency in a small design. Device covers all worldwide cellular bands from 700 MHz to 960 MHz and 1710 MHz to 2170 MHz for GSM, CDMA, WCDMA, DCS, PCS, UMTS, HSDPA, GPRS, EDGE and LTE. The off-the-shelf product is suitable for any M2M product manufacturer seeking high performance 4G/3G/2G capabilities for small devices. TAOGLAS http://ept.hotims.com/34485-82

http://ept.hotims.com/34485-78

6250MHz coaxial resonator oscillator boosts performance CVCO55CXT-6250-6250 Coaxial Resonator Oscillator (CRO) coaxial-based VCO with an internal proprietary frequency doubler. Products 2X fundamental technology provides performance levels of lower phase noise and lower harmonics over the competition, while achieving lower current consumption in the process. Device operates at 6250MHz with a tuning voltage range of 0.5Vdc to 4.5Vdc. Device has a typical phase noise of -100 dBc/Hz @ 10KHz offset and has good linearity. CRYSTEK http://ept.hotims.com/34485-79

Antenna covers 351366MHz frequency range Phantom TRA3513 antenna series covers the frequency range of 351-366MHz and measures 3.5 inches tall. Product’s design provides both vertical and horizontal polarization components, giving the unit diversity, frequency agility, low visibility, wide bandwidth and a low angle radiation pattern that is superior to traditional gain antennas in most applications. Its crosspolarization configuration also ensures uninterrupted transmissions in urban canyons and rural drop off areas. LAIRD TECHNOLOGIES http://ept.hotims.com/34485-80

RF power detector comes in rugged SMA housing CPDETLS-4000 RF power detector is encased in a rugged SMA housing, suitable for low-cost RF power monitoring in general lab use. Unit provides a frequency range of 10MHz to 4GHz. Product is a zero-bias Schottky diode intended for use as a large-signal power detector (greater than -10dBm). Input signal is rated at +30dBm maximum and video capacitance of the detector is 100pF. Product has an operating temperature range of -20 to 70C and a storage temperature range of -40 to 85C. CRYSTEK http://ept.hotims.com/34485-83

Bluetooth, Wi-Fi connectivity drives wireless solution Module platform housing the WiLink 6.0 (WL1271) single-chip, wireless combo solution with firm’s open source, Linuxbased OpenLink drivers are built on the community-validated mac80211 Wi-Fi driver and BlueZ Bluetooth protocol stack. The first in a series of such open source platforms, the WiLink 6.0 OpenLink platform is pre-integrated with firm’s AM18x Sitara ARM microprocessors (MPUs). This enables development of industrial or point-of-service applications on cost-effective ARM MPUs to easily introduce reliable, low-power Wi-Fi and Bluetooth wireless technologies. TEXAS INSTRUMENTS http://ept.hotims.com/34485-84

MEMS VCTCXO delivers ±0.5 PPM stability MEMS VCTCXO (Voltage Controlled, Temperature Compensated Oscillator) products are an ultra-stable, programmable, Encore-based family consisting of four devices, SiT5001, SiT5002, SiT5003 and SiT5004. All devices support frequencies up to 220MHz, industry-leading stability as low as ±0.5PPM and 500 femtoseconds of integrated RMS phase jitter (12 kHz to 20 MHz). Products are available in industrystandard footprints, enabling 100% drop-in replacement of quartz TCXOs and VCTCXOs with no design changes. SITIME CORP. http://ept.hotims.com/34485-85

DVGAs enable higher-performance basestation radio architectures LMH6522 quad and LMH6521 dual DVGAs provide superior linearity performance over a wide frequency range, making suitable for challenging multi-channel wideband wireless systems. Devices provide the flexibility to select from a range of filter impedance levels, including low impedance levels such as 50-Ohms. Devices are optimized for driving a wide range of load impedances. Products low-Z output drive delivers improved signal fidelity and provides the additional power gain needed when driving low impedance filters. NATIONAL SEMICONDUCTOR http://ept.hotims.com/34485-86

http://ept.hotims.com/34485-8

full online product listings at ept.hotims.com

http://ept.hotims.com/34485-9

products on review

electronic products and technology • september 2011

Standalone desoldering equipment uses MFR technology

Heat sinks mount via push-pin system

MFR-1300 Desoldering System is standalone and built on existing MFR technology by incorporating a new innovative design that allows the hand-piece to be used in two configurations. The user is therefore able to swap the grip on the hand-piece from the standard pencil-grip to a pistol-grip style, making the unit quite flexible for a variety of different applications. Product has a power supply that includes an internal pump providing 0.7 bar (21in Hg) of vacuum suction force combined with Smartheat technology. OK INTERNATIONAL http://ept.hotims.com/34485-87

Medical grade epoxy withstands repeated sterilization EP42HT-2ND2MED (Black) Medical grade epoxy fully complies with the testing requirements of USP Class VI plastics. This two component product resists recurrent autoclaving and sterilizations including radiation, steam, ethylene oxide, and chemical sterilants. Product serves well as electrical insulator with a volume resistivity over 1012 ohm-cm, a thermal expansion coefficient of 35 to 40 in/in x 10-6/C, a dielectric constant of 3.8, and a tensile strength exceeding 12,000 psi at ambient temperatures. Heat resistant up to 450F, it also withstands chemicals such as inorganic and organic acids, alkalis, organic solvents, and aromatic hydrocarbons. MASTER BOND http://ept.hotims.com/34485-88

Voltage sensing relay, timer prevents dead batteries FlexMod Voltage Sensing Relay & Timer (VSRT) conserves the starting power of a vehicle battery by shutting off auxiliary loads when either starting voltage drops to a low level, or a pre-set timer times out. Product virtually eliminates the possibility of vehicles not starting due to a dead battery. Measurig 4”x3”x1”, the unit alerts the vehicle operator when starting voltage is low and then temporarily cuts off any non-essential electrical loads, thus conserving power to start. COLE HERSEE http://ept.hotims.com/34485-89

maxiFLOW heat sinks come with an integral push pin mounting system for fast, safe attachment of the heat sinks onto BGAs and hot components. Each unit comes with a pair of durable plastic or brass push-pins. The pins run through opposite corners of the heat sinks and mount securely into 3.00mm holes in the pcb laid out in industry standard patterns. Plastic pins are lighter and non-electrically conductive; brass pins have added strength and durability for more rugged applications or thicker devices. An integral spring on each pin provides approximately 2 lbs of retention load, depending on the height of the component and the pcb thickness. ATS http://ept.hotims.com/34485-90

Toroidal surface mount power inductors are miniature 8300 series of toroidal surface mount power inductors are miniature and low profile, measuring 7.8 x 5.20 x 1.8mm. Device’s toroidal core ensures that the magnetic flux is confined to the core. As a result stray fields are almost totally eliminated, accounting for the enhanced EMI characteristics. With a device dependent maximum dc current of 3.0A, devices are available from 0.42 to 100uH. Dc resistance ranges from 24mohm up to 1320mohm across the range. MURATA POWER SOLUTIONS http://ept.hotims.com/34485-91

MOSFETs come in miniature SOT-23F package CMPDM203NH 20V, 3.2A N-Channel and complementary CMPDM202PH 20V, 2.3A P-Channel MOSFETs are packaged in the industry standard SOT-23F and have low rDS(ON) characteristics of 50mOhm and 88mOhm respectively. Device’s low gate charge of 0.8nC (N-Channel) and 1.3nC (P-Channel) make them suitable energy efficient solutions for space constrained power management applications requiring higher current MOSFETs. CENTRAL SEMICONDUCTOR http://ept.hotims.com/34485-92

Ac-dc LED drivers meet harsh requirements BPWXLD10 LED drivers are 10 watt with 350mA or 700mA constant current output and provide dimming capability from 0% to 100% corresponding to a 0Vdc to 10Vdc input control signal. The driver provides flicker-free performance by maintaining 1% output current regulation over the entire input voltage range of 100-308Vac, 50/60Hz. BIAS POWER

Six amazing models. One trusted name.

The Fluke P3 Series

http://ept.hotims.com/34485-93

Proven Practical Performance

The only thing that precedes Fluke’s highest standards of quality is our reputation for making the finest measurement tools in the world. Fluke thermal imagers are no exception. And, the P3 series handily delivers on the promise to offer the most tool for the money. • Superior image quality • One-handed, easy-to-use interface • Torture tested™

NEMA 4X IP 67 RoHS

Find out more about these new products from Fluke at www.flukecanada.ca/P3series

Compliant

Thermal Imagers Ti27 TiR27

Ti29 TiR29

http://ept.hotims.com/34485-10

http://ept.hotims.com/34485-11 FX14EPT1106OL.indd 1

EP&T_4.875x7.25_P3_Ti_Ad.indd 1

9/29/06 1:21:25 PM

8/04/11 12:18:46 PM

full online product listings at.ept.hotims.com

electronic products and technology • september 2011

Embedded Systems & Engineering Computers Modular AXIe embedded controller focuses on high-performance design, test Apps M9536A modular AXIe embedded controller is a powerful one-slot module that can be used to build compact AXIe systems. With builtin front panel interfaces, unit can integrate into hybrid test systems using USB and LAN. Product expands firm’s current offering, which provides the choice of external controllers or the embedded controllers, depending on specific test needs. AGILENT TECHNOLOGIES http://ept.hotims.com/34485-94

Backup power modules operate in remote areas Tri-M CBP10, CBP25, CBP58, CBP250, CBP500 backup power modules provide long life solution for maintenance free backup power in remote environments. Units provide operation extreme temperatures and deliver more than 500,000 full charge cycles. Products are maintenance free, highcycling backup power solutions suitable for embedded applications. Modules come in Farad capacities of 10, 25, 58, 250, and 500 providing backup power runtimes of 45 seconds to 45 minutes based on a 20W load. TRI-M TECHNOLOGIES

Nuvation expands design lab into Waterloo San Jose CA-based electronic product development services provider - Nuvation Engineering Inc., has opened a new product design center in Waterloo ON. The facility features a larger design and development lab that enhances Nuvation’s engineering capabilities and increases its electronics and software design capacity. The 10,600-square-foot facility also has dedicated space and expanded infrastructure for Controlled Goods Program (CGP) projects. The building has been custom-designed with multiple full ESD-protected electronics labs, full building security with access controls, two design areas with additional security controls, six meeting rooms, and a large meeting area to facilitate our in-house and vendor training activities. The facility also contains an advanced IT system that utilizes a computing cluster to maximize processing power for offline FPGA analysis and simulation. “The expansion is part of a strategic decision by Nuvation to further invest in our design centers and enhance our electronic product development capabilities and capacity,” says Nuvation vice-president Michael Hermann. “This world-class facility was designed specifically for our R&D operations and provides us with the necessary space for developing new product designs and helping our customers accelerate their time to market.”

http://ept.hotims.com/34485-95

Low-powered mini PC suits embedded, invehicle applications Model LPC-125LPM small form PC is rugged and operates in extreme temperatures, is energy efficient and draws less than 20Watts in operational power. Housed in an aluminum enclosure, the energy efficient and versatile unit measures 102mm x 155mm x 37mm or about the size of a deck of playing cards. Product weighs 1.2lbs or 0.54kg and operates from 10-26V of dc power making it suitable for invehicle/mobile/embedded applications. STEALTH.COM http://ept.hotims.com/34485-96

Scope enhances embedded systems’ performance RTO Series digital oscilloscope employs a real-time digital trigger that enhances productivity and product performance when debugging embedded systems. Product uses a common signal path for both the trigger and acquired data. This eliminates time and amplitude offset between the trigger and signal, enabling signals to be displayed with the least possible trigger jitter and allowing precise results to be achieved when measuring complex waveforms. ROHDE & SCHWARZ http://ept.hotims.com/34485-97

http://ept.hotims.com/34485-12

w w w. e p t . c a

embedded systems & engineering computers

electronic products and technology • september 2011

The migration path to MicroTCA MicroTCA looks to

VME, CompactPCI and AdvancedTCA for potential converts to emerging standard That MicroTCA packs a lot of punch in a small form factor is undeniable. The primary selling points for MicroTCA are impressive: an affordable next-generation computing architecture, high communications bandwidth, the latest multi-core processors, support for redundancy and high availability – all in a small system foot print that is extremely scalable. But, as with any emerging standard, adoption by its target markets is the ultimate measure of an architecture’s success. In the case of MicroTCA, several markets stand squarely in its crosshairs: the telecom market with a focus on network and wireless communications equipment; test and measurement, including communications test and high speed manufacturing inspection equipment; and the increasingly communication-centric Mil/ Aerospace market. Additional potential markets include medical imaging, industrial controls and the physics research community.

“Adoption by its target markets is the ultimate measure of an architecture’s success” Within these markets, MicroTCA is hoping to attract interest from CompactPCI and VME users looking for a next generation architecture that can deliver the increased performance, scalability and longevity these aging architectures lack, as well as AdvancedTCA adherents that are looking for a less expensive - yet still robust - feature set in a much smaller footprint. “OEMs that move to MicroTCA are going

long time, pushing it along, keeping it going and now they face a decision to go to a new architecture and MicroTCA would be a good option because of its size and increased performance,” says Lowdermilk.

Making the move to MicroTCA With communication bandwidth capabilities in the range from 40Gbits/s to over 1 Terabit/s, MicroTCA has more than enough bandwidth for most demanding applications.

to do so because it is a next generation architecture that delivers increased performance in a very small package,” says Mark Lowdermilk of Embedded Planet, a company that has produced AMC cards for AdvancedTCA, PrPMC cards for CompactPCI, PC-104, and PCI-104+, but is now concentrating on providing integrated solutions for MicroTCA. Although MicroTCA was introduced by the PCI Industrial Computer Manufacturers Group (PICMG) in 2006 there are already over 50 companies worldwide offering Advanced Mezzanine Card (AMC) modules for the standard. This can be attributed to the fact that MicroTCA utilizes the same AMC cards as another PICMG effort – AdvancedTCA – which started in 2002. “MicroTCA is gaining traction quickly because it is an offshoot of AdvancedTCA,” says Lowdermilk. So there is an overlap of the ecosystems in that regard and as a result, both architectures benefit.”

The move from AdvancedTCA

Perhaps the most logical migration path to MicroTCA lies with AdvancedTCA users looking for a lower cost solution and a smaller footprint. The original intent of AdvancedTCA was to meet the requirements of the next generation of “carrier grade” wired and

To facilitate the move to MicroTCA, companies such as Embedded Planet are going one step further to offer integrated solutions to help reduce the complexity, improve time to market, reduce risk to OEM partners by delivering application specific solution that meets the customer’s exact needs. Such “application ready” solutions drastically reduce integration time and costs and eliminate the need for customers to work with multiple vendors and integrate the components into a complete system themselves. “Customers may be used to dealing with multiple vendors, particularly with VME, Compact PCI and AdvancedTCA,” says Lowdermilk. “But in this economy with few resources, less time, and the need to get to market quickly, OEMs are searching for technology experts to help them reduce costs and improve time to market.”

wireless networking and telecommunications equipment such as media gateways, video transcoders and IPTV. As a result, AdvancedTCA was created to deliver massive processing and bandwidth with high availability and built-in redundancy. However, it has also been unofficially dubbed “big iron” due to its overall size. “For many applications, AdvancedTCA may be overkill and the final solution is usually quite large,” says Lowdermilk. “For those that prefer AdvancedTCA’s features, but don’t want to invest in unnecessary functions and are looking for a smaller footprint, MicroTCA is a natural choice.” With communication bandwidth capabilities in the range from 40 Gbits/s to over 1 Terabit/s, MicroTCA has more than enough bandwidth for most demanding applications. Starting with a very small two blade chassis and scaling up to a maximum twelve MicroTCA is gaining traction quickly because it is an blade solution, 2U MicroTCA offshoot of AdvancedTCA and there is an overlap of Processors blades (PrAMCs) the ecosystems where both architectures benefit. can be networked together to deliver a tremendous amount In December, 2010, Embedded Planet of computing resources, particularly when moved from simply producing off-theeach could be designed with the latest shelf PrAMC boards for AdvancedTCA and multi-core processors to further increase MicroTCA in favor of delivering complete computing power. Additional system comsolutions ready to run out-of-the-box for ponents include power modules, cooling embedded applications. units, and AMCs for everything from mass “The modular embedded computing storage to high end graphic cards. marketplace, including MicroTCA, can be Ideal product applications for the difficult to navigate and our goal is to MicroTCA architecture includes wireless simplify that for the customer,” says base stations, Wi-Fi/WiMAX radios, optiLowdermilk. cal networks, and media servers, to name Embedded Planet is partnering with a few. OEM test and measurement equipother leading companies in the MicroTCA ment for network enterprise and wireecosystem space, including Concurrent less equipment are also well served by Technologies, N.A.T. for Network I/O modMicroTCA’s feature set. ules and carrier hubs and MicroBlade for MicroTCA also delivers the high-relichassis, backplanes and power modules. ability inherent in AdvancedTCA with The final solution will be an applicaavailability up to five nines (0.999999). tion specific solution that is assembled As with AdvancedTCA, redundancy and and pre-tested before it is delivered to cooling configurations can be scaled for the customer. full, partial or no redundancy depending “With an integrated solution, the cuson the application’s requirements. tomer can focus on higher levels of activity that bring them more value. So A Next Gen platform for VME there are savings in terms of direct cost, savings in indirect costs and a reduction and CompactPCI in risk factors,” says Lowdermilk. Although VME and CompactPCI are still viable for many applications, these For more information on a move to MicroTCA from Embedded Planet, go to architectures are struggling to meet the http://ept.hotims.com/34485-98 demanding bandwidth requirements of today’s increasingly communication-centric industrial and military applications. As a result, many VME and CompactPCI SCAN HERE users are looking for that next generation platform that can deliver on both counts. MicroTCA has the added benefit of further decreasing the size of the final solution, with its 2U cards being smaller than VME and CompactPCI’s 3U and 6U offerings. “There are a lot of people that have been using VME and CompactPCI for a

http://ept.hotims.com/34485-13

full online product listings at ept.hotims.com

Accelerating the Speed of Design. ™

Your one solution for design creation. Avnet Memec focuses on a select group of leading suppliers to provide original equipment manufacturers (OEMs) a high level of technical expertise — enabling the swift and accurate design of leading-edge products. With factory trained and certified support, Avnet Memec specialists offer a level of technical depth unmatched in the industry. With easy access to our industry experts, your projects move forward with greater velocity, driven by in-depth technical expertise. That translates into faster time to market for you, with greater ease and confidence. From Design to Delivery.™ Avnet is ranked Best-in-Class* for online seminars, technology education and training, design & engineering services, knowledgeable application engineers and our online 24-hour design support – proof that we consistently deliver:

> Proactive engineering support > Factory certified FAEs Accelerate Time to Market.™ Visit the Avnet Design Resource Center™ at: www.em.avnet.com/drc

www.twitter.com/avnetdesignwire

http://ept.hotims.com/34485-14

electronic products and technology • september 2011

Connectors

Mechanical fiber optics technology interconnection

for new market applications By: Brendan Pogue, Valdor Technology International Inc., Vancouver

Conventional field installable fiber optic connectors use epoxies and gels. The downside to these older technologies include: a significant cost of time, a need for electrical power supply, a higher failure rate, chemical exposure and a reduction in efficiency. Innovative Impact Mount Technology (IMT) provides a state of the art product, with many attributes not available in conventional field installable connectors. The basic concept is to wrap metal around a bare fiber to mechanically hold the fiber in place. Based on this principle, the technology can be used for multi-fiber applications to wrap metal around a bundle of fibers aligning all seven cores within sub-micron distance of each other. The ferrule of a connector is terminated by crimping the end of the ferrule onto the fiber buffer and impacting the tip of the ferrule around the bare fiber. For all ST/SC/FC/SP connectors, the ferrule diameter measures 2.5mm. The patented Impact Mount Technology process is done in three steps with a total assembly time of roughly two minutes:

1. Crimp rear of connector, impact

front of connector.

polishing paper.

2. Simple fiber scoring/removal. 3. Quick polishing: 3.0m and 0.3m The Omega Enclosure Package is designed to house Valdor’s patented

Omega field installable kit.

miniature SP and KSP splices. This product has numerous applications in the mining, oil and gas, aerospace and industrial sectors. For certain rugged applications the Omega Enclosure also includes a tension resistant member. The unique features of the enclosure will allow fan-out and splitting of fiber to various locations. The enclosure is waterproof and rugged and can withstand harsh environments and because the product involves no epoxies or gels the enclosed SP and KSP splices do not require a clean environment or electricity for installation. The unique design of the enclosure allows for fast mechanical installation in space restricted areas. This Omega Enclosure can accommodate from one to 48 miniature splices. The Omega Repair Kit includes the Omega Enclosure Package, the IMT SP Connector Kit and various related tools. Valdor is marketing the new Omega Repair Kit for harsh environment applications.

HeptoPort Experience with the Impact Mount led to a new concept for affixing and terminating multiple fibers, with extraordinary self-alignment features. The HeptoPort is the only circular connector on the market with multi-fiber connections and allmetal construction. The bundle connector eliminates the need to fan-out several individual connectors in the field, thus reducing space requirements and connector costs. It is an ideal multi-fiber connector for small space applications such as in aircraft, military vehicles, industrial equipment and building conduits. The HeptoPort seven-fiber connector utilizes a 2-dimensional self-aligned process of the IMT that enables a connector with a rotational alignment key to position each fiber together for a full connection. This seven by seven HeptoPort® connector miniaturizes the size of the connection and offers simplicity for in-

A cost-effective alternative to conventional fiber optics connectivity. No epoxy or index matching gel, quick and simple assembly process, highly reliable in harsh environments. line cable connection. Therefore, when two multi-fiber connectors are mated, all seven fibers will automatically align. The circular symmetry inherent to hexagonal close-packed fiber bundles lends itself naturally to the IMT method. The IMT is able to guide, in one instantaneous action, arrays of stripped optical fibers to their natural hexagonal closepacked arrangement, like marbles falling into a box. The alignment of the centers of the surrounding “planetary” fibers, relative to the center “sun” fiber, is determined entirely by the uncertainties in the fiber outside diameter, circularity, and core/cladding concentricity. In the worst case scenario these uncertainties are less than 0.6 microns for the sevenfiber HeptoPort configuration. In addition, the interconnection of a 2-D seven-fiber bundle can be used

Ideal solution for harsh environments where space limitation, extreme temperatures, shock and vibration are difficult parameters to accommodate

An Eye for Innovation

Bringing Precision, Flexibility and Experience to Wire Processing

NEW UniStrip 2300 n

Fully programmable benchtop wire stripper

Strips wire from 10 - 32 AWG and jacketed cables up to 0.22” in diameter

Intuitive color touchscreen user interface

No mechanical adjustments required when changing wire sizes

Can strip inner conductors of jacketed cables with short breakout lengths

Trigger sensitivity automatically adjusted based on wire size

to align microelectromechanical systems (MEMS), couplers and optical switch devices for long-haul applications.

Application The IMT field installable kits and connectors are the ideal solution for harsh environments where space limitation, extreme temperatures, shock and vibration are difficult parameters to accommodate. The IMT kit and connectors are all-mechanical and do not use any epoxy or index matching gels. They offer more stable and repeatable performance even under harsh environments. The field installable kit is designed for quick installation of connectors where no power source is available. It allows end users to repair their systems in the field and reduces expensive down-time. The IMT field installable kits, connectors and enclosures can quickly repair any damage of the fiber inside a harness that is often subject to abuse by operators handling the equipment. Enclosures allow a fan-out of the harness that can be split in different directions from the conveyer belts, mining tunnels, floor and ceiling in small space where electricity is not readily available. These service and cable enclosures with miniature SP connectors are ideal for restricted space and high density applications. Harsh environment markets including mining, oil/gas, aerospace, broadcast, military and industrial are growing rapidly. A variety of large equipment used in these markets are controlled and operated by special computers that require fiber harnesses that do not generate harmful electrical fields for their sensor applications.

Conclusion According to Electronicast Consultants (www.electronicastconsultants.com), the global market for fiber optic connectors is projected to grow to US$3.45 billion in 2011. With a quickly expanding industry, Valdor has chosen to target niche markets. IMT field installable kits and connectors are the ideal solution for harsh environments with space limitation, extreme temperatures, shocks and vibrations. For more information on mechanical fiber optics technology from Valdor Technology International Inc., go to http://ept.hotims.com/34485-99

SCAN HERE

www.schleuniger-na.com/US2300_ept (905) 827-1166 http://ept.hotims.com/34485-15

full online product listings at ept.hotims.com

http://ept.hotims.com/34485-16

connectors

electronic products and technology • september 2011

Axial type circular connector is field attachable M8x1 series circular field attachable connector allows wires to be installed using built-in cage clamp or by soldering the wires to the contact tail. Product’s integrated sensing range allows the user to disconnect or connect the conductors to the cage clamp without tools. This allows the installation of wires with cross section from 0.14mm2 up to 0.34mm2, solid or stranded conductors. Devices meet IP67 ratings in a mated condition. Product provides hexagon mounting rings to simplify installation. CONEC http://ept.hotims.com/34485-100

Surface temperature sensor plugs in to handheld unit STC-100 series of surface temperature connector/ sensor plugs directly into most handheld thermometers and is available in K or E thermocouple types. The small, compact connector body has a 250msec response time and provides an integral thermocouple sensor for low temperature surface measurements, which can be removed for cleaning or replacement if damaged. Device can be plugged to any Type K or E handheld meter with Flat Blade contacts and provides fast and accurate readings. The 1” diameter body design allows easy access to the heated. OMEGA http://ept.hotims.com/34485-101 ESonic-Bulgin-Sept2011 copy.pdf 8/16/2011 3:34:37 PM

BGA socket packages on pcb without major performance loss SG-BGA-6346 high performance BGA socket for 1mm pitch, 616 pin BGA IC’s is designed for 27X27mm package size and operates at bandwidths up to 8GHz with less than 1dB of insertion loss. Devices dissipate 4.5 watts with passive heat sinking (natural convection) and can handle up to 40 watts with active heat sinking (dc fan on top of heat sink). Contact resistance is typically 20 milliohms per pin. Products connects all pins with 8GHz bandwidth on all connections. Socket is mounted on the target pcb with no soldering. IRONWOOD ELECTRONICS http://ept.hotims.com/34485-102

Military connector is 60% lighter than standard units AMC Series advanced military connector weighs 60% less than standard military connectors Compact device retains the features of firm’s reliable Mini-Snap military connectors. Devices provide watertight IP68 protection with a non-reflective surface and a lifetime greater than 5,000 mating cycles. Product has options of push-pull locking or break-apart, while also available in straight plug or right angle configurations. ODU-USA http://ept.hotims.com/34485-103

1.27mm pitch IDT connector includes latched header Picoflex IDT connector system expands to include the Latched Picoflex Header, suitable for many high-density applications where space is at a premium and power and signal are required. Comprising pcb headers, cable connectors and standard ribbon cable assemblies, device provides a reliable terminal design, and locking and cable strain relief to secure connection in a variety of demanding applications. MOLEX

http://ept.hotims.com/34485-104

DC switch isolates up to 1500Vdc

CMY

DC Disconnect switch provides reliable physical isolation for up to 1500Vdc in a compact design (99 mm x 90 mm x 92.5 mm). Device’s hybrid technology allows reliable disconnection in the event of low currents up to 30A, while ensuring a lowwear contact system. Device is fitted in a plastic housing designed for rail mounting to DIN 43880 and provides ease of mounting through 10 mm2 terminals for PV+ and PV-. The hybrid function principle does not require any additional power supply for the units electronics. Also, the modular design allows additional stages of expansion for remote ON/OFF and/or status queries. E-T-A CIRCUIT BREAKERS http://ept.hotims.com/34485-105

http://ept.hotims.com/34485-17

full online product listings at ept.hotims.com

Q Series

Proven. Flexible. Diverse. Integral ground/power plane rated up to 9.5 amps. Q Strip® - The industry standard for low profile board stacking on 0,5mm, 0,635mm and 0,8mm pitch. Q Rate® - Smaller footprints and lower profile right angle without sacrificing performance. Q2™ - Rugged contact system provides increased contact wipe. Elevated, right angle, edge mount, power and shielding options.

SERIES

SUDDEN SERVICE http://ept.hotims.com/34485-18

connectors

electronic products and technology • september 2011

Right-angle, one piece interface connects reliably Right-angle, one piece interface is a high performance board-to-board interconnect solution suitable for high shock/ vibration applications. A reliable connection and the elimination of bent pins provide an interface with improved quality over elastomers and other pin and socket systems. Device reduces costs by requiring the handling and processing of only one component. SAMTEC

Photovoltaic wire provides flexible choices to meet UL 4703 PV wire and UL 4703 PV wire/TÜV 2 PFG 1169 wire requirements. Product is resistant to moisture, sunlight, ozone and UV. The RoHS and REACH compliant product operates in a -40C to +90C temperature range. ALPHA WIRE http://ept.hotims.com/34485-109

Over-molded connectors include CAN-Bus cable

http://ept.hotims.com/34485-106

Space-saving connectors provide EMI shielding Nemesis Series circular connector is lightweight with small form-factor and provides significant space savings for handheld and medical devices. Products are 50% lighter, 60% smaller and 100% sealed when compared to firm’s 38999 series interconnects. Devices provide full 360-degree EMI shielding and are fully sealed to IP67/IP68 specifications. Product series provides low profile configurations and a ‘ripaway’ decoupling action for equipment requiring interconnects that combine power, data and audio. ITT http://ept.hotims.com/34485-107

Hybrid micro/nano connector reduces weight, space Hybrid Micro/Nano high-rel connectors reduce weight and space, while meeting design requirements. Power and signal processing are combined in a compact area as the devices are comprised of a standard nano (.64 mm pitch) and a standard micro (1.27 mm pitch) insulators and contacts in a CNC machined metal shell. The nano contacts can carry up to 1 amp per contact while the micro contacts can handle 3 amps. OMNETICS EP&T KS+QF 9-2011

8/15/11

12:37 PM

http://ept.hotims.com/34485-108

Page 1

•UL Recognized Components •Easy, safe and quick way of connecting and disconnecting wires •Cost effective PCB connectivity •Sturdi-Mount features for increased PCB mounting strength •Durable Tin Plating for excellent solderability •Wide variety of configurations to suit most applications •Male tab sizes for .110"; .187"; .205"; .250" •Female receptacle sizes for .110"; .187"; .205"; .250"; .312" •Custom terminals can be manufactured to your specifications RoHS Compliant

Solar wire meets various PV standard

~ ISO 9001 Certified

ELECTRONICS

M12 Series 763 over-molded connector line has expanded with a new cable specifically designed for CAN-bus applications. Products are suitable for industrial network applications including factory automation. The single-ended cordsets come in both male and female versions with 5 gold-plated contacts. When properly mated, the connectors are sealed to an IP67 rating to ensure protection from liquids and debris. Standard cable lengths are 2-, 5- and 10-meters. Other custom lengths are possible upon request. BINDER

http://ept.hotims.com/34485-110

Circular IP69K-rated connectors sustain harsh conditions M12 line of industrial grade connectors and connection systems include rugged IP67 to IP69Ksealing and ease of mateability for harsh factory conditions. Compliant with IEC protection levels specifications, devices provide a robust stainless steel housing that is dustproof and waterproof. CONEC

http://ept.hotims.com/34485-111

Scan Here

C O R P.

EMX Enterprises Ltd Vancouver • Toronto • Montreal Tel: (905) 764-0040 • 1-800-268-6822 Web: www.emx.ca • e-mail: sales@emx.ca http://ept.hotims.com/34485-19

http://ept.hotims.com/34485-20

full online product listings at ept.hotims.com

The new Push-In

Experience!

Push-In Technology the new push-in experience with P.i.t. is the latest generation of modular terminal blocks in the CLiPLine complete system.

P.I.T. - Just Try It! Register online for a FREE sample at www.phoenixcontact.ca/PIT

Save valuable labour with tooless connections

Up to 50% lower insertion forces required

Release button is quick and easy with no special tools required

Completely touch-proof

For additional information please contact: toll Free: (800) 890-2820 www.phoenixcontact.ca/PIT http://ept.hotims.com/34485-21

connectors

electronic products and technology • september 2011

Multiple level spring clamp terminal block measures 4.2mm wide HD200GR double level terminal block measures 4.2 mm wide, suitable for applications that need to save space. Device provides a space savings of 30% compared to traditional terminal blocks. The 2-level feed thru device uses spring clamp connection and designed to accept the low-cost push in jumpers, ‘easy bridge’ for connecting adjacent circuits. Product is rated at 15amps and 600V. ASI http://ept.hotims.com/34485-112

Right Angle Shrink DIP .070” (1.78mm) Pitch Strips 870-10-0XX-20-001000 and 871-43-0XX-20-001000 right angle options join line of 1.78 mm pitch connectors. The single row sockets and headers can be combined with vertical 1.78 mm pitch devices for a variety of interconnect configurations. Product’s pitch spacing allows for higher density packaging than 2.54mm pitch and provides the same current carrying capacity and mechanical strength. MILL-MAX MFG. http://ept.hotims.com/34485-113

newswatch

Phoenix Contact Canada moving to Milton ON Global manufacturer of industrial electrical and electronic technology products Phoenix Contact is moving its Canadian headquarters from Mississauga to Milton ON. Effective August 2, operations including logistics, value-added assembly and customer care will begin at the new location at 8240 Parkhill Drive. Driven by a period of “remarkable growth”, the firm moves into the brandnew 25,000-squarefoot facility that will accommodate sales, marketing, customer care, logistics, IT and accounting staff. The building will also Phoenix Contact’s new Canadian headquarters in Milton ON. feature an expanded value-added solutions centre, addition of an automation lab and an increased training capacity to enhance customer services. Phoenix Contact will invest further in the Canadian marketplace with its recently opened Technology Centre in Montreal, a planned Western Canadian Technology Centre, while expanding its engineering application and support staff. With corporate headquarters in Blomberg, Germany, the firm first supported the Canadian market in 1983 with a regional sales office and training centre in Montreal.

WDK 10 dual level terminal block saves space WDK dual-level terminal block reduces cabinet space by 50% and proivdes a 10mm width, along with one of the highest wiring densities among screw terminals for power distribution applications requiring 6AWG conductors. Device integrates two independent circuits within one terminal. Product’s design includes corresponding jumpering channels that accommodate the connection of screw-down jumpers to adjacent terminals. Depending on power distribution requirements, an upper- and lower-bussed terminal is available (WDK 10V) to common 4-wires to one terminal. WEIDMULLER http://ept.hotims.com/34485-114

Mini-bayonet connector is 70% lighter Trinity MKJ3 mini-bayonet connector series is suitable for use in electronic subsystems. Devices are up to 70% lighter and 50% smaller than traditional MIL-STD circular connectors, while providing high durability and similar environmental performance. Product’s provide a quick coupling design that fully mates and locks in a single quarter turn. Device supports high-density signal applications with size 23 split-tine high reliability contacts and is available in crimp and pcb mount versions. ITT http://ept.hotims.com/34485-115

E-T-A Circuit Breakers, Richmond Hill ON, has reached an agreement to distribute AK Teck electric vehicle connectors in Canada. AK Teck has been manufacturing electrical components and systems for commercial vehicles in Germany since 1918. “Since E-T-A has substantial business in the transportation sector it has established a strong strategic partnership with AK Teck in Germany,” explains Bob Ashmore, managing director, E-T-A Canada. “It therefore makes a lot of sense for E-T-A to distribute this impressive line of high quality German made connectors and terminal blocks in Canada”. E-T-A’s transportation products range from miniaturized, cost effective automotive breakers to heavy-duty battery isolation switches for OEMs and retrofitters. The AK Teck products include connectors, cabling systems, push-buttons and switches, bridges and receptacle plus much more. AK Teck is also known for customized solutions for specific and difficult applications.

Rugged assembly reduces cost of high throughput RF test

Pcb-mount D-sub connectors are right-angle Right-angle, pcb-mount D-Sub connectors are suitable for I/O applications and are sold in packages of 10 units per tray. Devices come in DB9, DB15, DB25, DB37 and HD15 sizes in both male and female versions. Soldering the devices to boards is simplified due to board locks that provide a secure pcb connection. L-COM http://ept.hotims.com/34485-116

E-T-A to distribute AK Teck in Canada

Rugged 18GHz cable assembly joins firm’s PHASEFLEX Microwave/ RF Test Assemblies line, suited for high throughput production test applications in the wireless infrastructure market. Device’s increased durability reduces total costs for testing, as it lasts longer and decreases the frequency of cable assembly replacements. Product’s stable performance ensures precise measurements and repeatability, which reduces testing errors. W.L. GORE http://ept.hotims.com/34485-117

new literature MICRO BACKPLANES Design Guide highlights high speed and high density board-to-board and panel & I/O interface products for high speed micro backplane applications. SAMTEC http://ept.hotims.com/34485-118

NON-MAGNETIC RF CONTACT Brochure describes series of non-magnetic connectors and cable assemblies for MRI applications and meet the demands of an evolving medical diagnostics market. PHOENIX CO. OF CHICAGO http://ept.hotims.com/34485-119

E-VERSION PRODUCT CATALOG 2011 Product Catalog is available as an electronic version posted online at circuitprotection.com. Updated catalog provides customers with a comprehensive, in-depth information on circuit protection devices. TE CIRCUIT PROTECTION http://ept.hotims.com/34485-120

BI-LOBE CONNECTORS Brochure highlights firm’s Bi-Lobe connectors in MIL-DTL 32139 standards. OMNETICS http://ept.hotims.com/34485-121

http://ept.hotims.com/34485-22

http://ept.hotims.com/34485-23

full online product listings at ept.hotims.com

MORE NEW TECHNOLOGY PRODUCTS ADDED DAILY. AND SHIPPED THE SAME DAY.

We are thrilled to announce the coming together of element14 and Newark into one powerful entityâ&#x20AC;&#x201D;the all-new element14. We will continue to provide the great products and personal service weâ&#x20AC;&#x2122;re known for, plus a significant new product expansion, and much more. The vision is a single destination that offers an unprecedented range of technical data, innovative tools and services, meaningful community and expert engagement, and the best component shopping experience ever. Learn more about our combined vision at www.newark.ca/together

http://ept.hotims.com/34485-24

products on review

electronic products and technology • september 2011

Two-channel soldering system offers antistatic touchscreen Weller WX2020 digital soldering station and WX2 accessories improves performance and ease of use, with intuitive user interface and antistatic touchscreen. Unit includes two WXP120 pencils for large or small parts requiring high power and can be operated simultaneously. The capacitive glass touchscreen is chemical and temperature resistant and is ESD safe to protect sensitive components. An energy-saving sleep mode and multiple language selector make the soldering station efficient and practical for use worldwide. NEWARK/ELEMENT14 http://ept.hotims.com/34485-60

Just-in-time programming reduces costs, risks with factory integration RoadRunner3 inline programming system is a next generation just-prior-to-placement programming solution, featuring Factory Integration Software (FIS). Product streamlines the production process and eliminates operator errors through its connection to a firm’s manufacturing execution system (MES) or other shop-floor control software and through that connection all the way to the firm’s enterprise resource planning (ERP) system. This versatile and configurable high-speed automated unit mounts directly onto an SMT machine without consuming additional floor space or altering the production line. DATA I/O http://ept.hotims.com/34485-62

Cleaning chemistry removes flux from low clearance components

VFD module emits high brightness

AQUANOX A4638 advanced packaging cleaning agent removes flux residue from flip chip and low clearance components. Product rapidly removes water-soluble polar flux residues at low concentrations, providing a low cost of ownership. The nonhazardous, biodegradable aqueous solution contains no CFCs or HAPs. Product is RoHS compliant, Halogen, Halide and Hexane free. KYZEN http://ept.hotims.com/34485-61

Y Series CU20027-YX1A bright VFD module is bright and vibrant emissive display, capable of increasing it’s brightness up to 400%. For applications intended for use in high ambient conditions, the display is recommended to have minimum of 5:1 contrast ratio. The use of filter is recommended to increase device’s contrast ratio in such conditions. Device provides 20x2 character LCD and shares the pcb size (116mm x 37mm) and mounting holes. NORITAKE ITRON http://ept.hotims.com/34485-63

Solder paste extends reflow profiles SN100C-XF3+ leadfree solder paste accommodates extended reflow profiles with or without the use of nitrogen. Product provides improved wetting on all common pad finishings and yields shiny joints reminiscent of leaded solders. Product also exhibits a robust printing window. Product performs better in eliminating voiding when compared to SAC-alloys. COBAR SOLDER PRODUCTS http://ept.hotims.com/34485-64

Dc-dc converters deliver 4:1 input voltage ranges Traco Power TEN 15WI Series of high performance 15 Watt dc-dc converter modules provide ultra wide 4:1 input voltage ranges in a 1” x 2” x 0.4” package with industry standard footprint. Product provides input voltages up to 75Vdc, improved EMC characteristics and EN 55022, Class A and FCC, Level A approval. Standard features include Remote On/Off, over voltage protection and under voltage lockout. Units includes short circuit protection in a six sided shielded case with I/O Isolation of 1500Vdc. POWER SOURCES UNLIMITED http://ept.hotims.com/34485-65

LED driver boosts output in high-brightness apps

http://ept.hotims.com/34485-25

LUXdrive A009 BuckBlock LED driver is a high output, constant current power module suitable for driving all types of high-brightness, high-power LEDs. Product is available in 1.0Amp, 1.4Amp and 2.1Amp versions, with a footprint of 2.0” x 1.2” and low profile of 0.38”. Device operates with dc input voltages between 10 and 32 volts. LED DYNAMICS INC. http://ept.hotims.com/34485-66

full online product listings at.ept.hotims.com

Custom Electronic

ENCLOSURES Built in 2-3 days! CUSTOMER EXPERIENCE: Protocase helps Creative Connors Inc. bring Automation to Live Theatre Anyone who appreciates live theatre knows that there is a lot more to it than just acting. Good quality sets are essential to create the correct mood and atmosphere for each scene. It is common for set designers to use motion to create dynamic sets that enhance performances. This is done through the use of moving elements such as rotating platforms, linear motion, and even theatrical flight. In the past, elements were moved manually by stagehands, limiting what could be achieved. But today, automation technology is invading the theatre, and opening up a whole world of opportunities to add depth and excitement to performances. Gareth Conner, and his company, Creative Conners Inc., of Barrington, Rhode Island, are the moving force behind the introduction of automation to theatre. For over a decade, Gareth worked the theatre industry, creating sets for everything from regional theatres to large productions. Here he discovered his passion for bringing theatre sets to life through motion. But he also saw that much of the theatre world did not have access to automation, because existing systems were too expensive and complicated. This led to his vision of an entirely new automation system that was modular, open, easy to use, and affordable. The rest is a classic American entrepreneurial success story. In 2004, Gareth left his job, mortgaged his house, and set out to develop his vision into a line of products that make automation accessible to all levels of theatre. Developing and manufacturing a high quality, professional looking product line, on a tight budget, and at niche volumes was challenging, but four months later, he had sold his first product, and he achieved breakeven within a year. According to Gareth, “Protocase was instrumental to our success during the early years. At this time, I was just one guy in a basement, and I didn’t know much about sheet metal. I tried to get a combination of local shops to build and finish the metal parts that I needed. But they had little interest in my small jobs, and the cost they quoted was so high I would have blown most of my budget just on the metal parts. Then I stumbled on Protocase in 2004. They were able to work from my stack of rough designs, gave me a lot of advice, and then delivered high quality enclosures and parts, fully finished, in one stop, at a reasonable cost. Without this, I don’t know how I would have gotten off the ground.” Today, Creative Conners Inc. has become a thriving company, working with organizations that range from high school theatres to broadway. And Protocase remains an important part of their supply chain. “Protocase can supply me with the quantities that I need for my production runs, and their short lead times let me order when I need to. And I’m now making use of their blanket order program, which allows me to get pricing on my annual usage, while still ordering product only when required.” Now that the thrills and chills of startup phase are gone, Gareth says he’s still having a great time, as he continues to innovate and extend his product line. “Creativity and technology really come together in theatre. We get to work with amazing people who are working on whacky and wonderful ideas, and I get to fulfill my passion for making things move in the theatre.”

One-stop Shopping

We build fully finished enclosures to your design, in your choice of steel, aluminum, stainless or galvanized, including cutouts, powder coats, silkscreens, fasteners, and hardware.

Built in 2-3 days

We offer unheard-of manufacturing speed. This lets you complete your electronics before you finalize your enclosure design. This greatly reduces painful and time consuming rework.

No minimum Orders

We’re here to help our customers get their jobs done, so we’ll give your order the same priority and respect whether it’s a single enclosure or a one-off project, or a production run of thousands.

Also Available The fastest and easiest way to design, price and build custom electronics enclosures. Free Downloadable 3D Enclosure Design Software Fast and Easy Design Instant Price Quotes Buy Your Custom Enclosure Online With 2 - 3 Day Turnaround

www.protocasedesigner.com

Protocase allows you to buy custom electronics enclosures with a whole new level of speed and convenience. Our friendly and knowledgeable sales representatives will be happy to assist you in placing your order.

P R O TO C A S E

Custom Electronic Enclosures For Engineers & Designers

http://ept.hotims.com/34485-26

www.protocase.com info@protocase.com 1.866.849.3911

electronic products and technology • september 2011

Switches & Circuit Protection Membrane switches can be customized Firm produces a wide range of customized membrane switches, with many combinations of designs, colors, and lighting solutions. Devices are ergonomic and provide low profile, space-saving designs that adapt to most projects. Devices can be made with either tactile feedback through sound and light indication or non-tactile, and rovide flexible tail termination designed to connect directly to electronic equipment. APEM COMPONENTS http://ept.hotims.com/34485-122

TA35

Switching and overload protection with a twist

SMT fuses deliver high I2t characteristics 2410SFV family of 20 ac-dc fuses provide current ratings from 0.5A to 20.0A. Devices provide secondary-side circuit protection, conserve board space and reduce design costs in a broad array of high-voltage, high-current designs. Available in an ultra-thin (6.1x2.5mm) SMD package, devices provide I2t characteristics as high as any similar SMD device on the market. Products deliver a nominal cold resistance (DCR) from 0.0034-ohm to 0.231-ohm and a high-interrupt current from 50A to 300A. Rated for operation at temperatures ranging from -55C up to 125C, the fuses’ high-inrush current withstand capability minimizes nuisance tripping during transient overload conditions. TE CONNECTIVITY http://ept.hotims.com/34485-123

12V circuit protector shields automation, automobile apps ESX10-T electronic circuit protector comes in a 12V version. Device is track-mountable and allows optimum protection, while providing protection in combination with 12V switch-mode power supplies and battery systems. The spacesaving device has a width of 12.5mm and 80mm in height and depth. Product provides switchable transistor load output. There is no contact wear as switching is done electronically and there are no internal contacts. E-T-A CIRCUIT BREAKERS http://ept.hotims.com/34485-127

Uncompensated, unamplified board mount pressure sensors self-calibrate TruStability NCS Series uncompensated, unamplified board mount pressure sensors provide the flexibility of selfcalibration, combined with enhanced stability, accuracy and repeatability. Devices provide a ratiometric analog output for reading pressure over the specified full scale pressure span and temperature range. Products deliver infinite resolution on the pressure signal. The frequency response is limited only by the end user’s system. Ranging from 1 psi to 150 psi (60 mbar to 10 bar), these sensors will operate as specified from -40C to 85C. HONEYWELL

http://ept.hotims.com/34485-124

Sealed toggle circuit breaker withstands harsh environments

www.schurterinc.com/new_cbes

Schurter’s popular TA35 series just got a new twist. The compact high performance circuit breaker now offers a rotary knob switch, in addition to its popular rocker switch. The heavy-duty look and feel provides safe and easy operation, even in applications where gloves are worn. Customer specific colors for knob and bezel are available. TA35 Series Features: - Status I/O indicator - Snap-in mounting - 1-, 2- or 3-pole versions - Current rating 0.5 – 20 A 1-pole and 2-pole; 0.05 to 12A 3-pole - Operating termperature of -30° to +60° C - 6.3 x 0.8mm quick connect terminals Conforms to IEC, UL & CSA standards. cURus and VDE approved.

MS-Series sealed toggle circuit breaker operates in extremely harsh environments. Ideally suited for COTS (commercial off the shelf) military applications, device provides a durable metal and sealed mounting bushing with MIL-PRF-39019F ingress protection when mounted in a panel. Product was designed in accordance with the requirements of MIL-PRF-55629 and MIL STD 202. CARLING TECHNOLOGIES http://ept.hotims.com/34485-125

Aluminum switches enhance look, feel of HMI systems Aluminum lenses and front bezels for all pushbuttons and indicators in the series 04, 14, 56, 61, 71, and 84 switch ranges improve the human machine interface (HMI) in a wide range of interior and exterior applications. Devices are available in a wide range of standard colors, including gold, silver, blue, red, and green, with options for convex lenses or illuminated spot. Firm can also laser engrave these lenses with any legend from a large internal library of ISO and industry standard symbols, or custom markings, as specified by the customer. The highly resistant finish provides durability well-suited for industrial use. EAO SWITCH http://ept.hotims.com/34485-128

LED illuminated key switches come in double action and detect versions

Brilliant tact switch terminates vertically

K12S Series of robust, IP67-sealed SMT key switches are available with LED illumination or double action and detect versions. Devices provide tactile feedback and are able to achieve 1-million life cycles on specific versions, making it suitable for the harsh environmental conditions. The RoHS-compliant and halogen-free product provides flexibility to tailor force values, actuation travel options and provide single pole double throw (SPDT) custom solutions that meet application requirements. Product has an actuation force range of 1.5N to 9N with an overload of 100N and a total travel of 1.5mm. C&K COMPONENTS

TL1265 Series tact switch provides vertical termination and brilliant illumination. Device has a 500,000 lifecycle expectancy and multiple illumination options, plus a choice between a few cap sizes and cap colors. Product provides life expectancy of 500,000 cycles and a contact rating: 50mA @ 12Vdc. Device provides contact resistance of 100m-ohm; insulation resistance of 100 Mohm min at 500Vdc and dielectric strength: 500Vdc for 1 minute. E-SWITCH

http://ept.hotims.com/34485-126

http://ept.hotims.com/34485-129

http://ept.hotims.com/34485-27

full online product listings at ept.hotims.com

switches & circuit protection

electronic products and technology • september 2011

DIN-Rail dc current sensors measure continuously 789 Series Feedthrough Current Sensors continuously measure dc currents to optimize photovoltaic (PV) energy production. Via serial connection, the 789-620 (0–80A dc) and 789-621 (0–140A dc) sensors transmit data with an accuracy of 0.5% (full scale value). Devices are equipped with dual RJ-45 interfaces and transmit data via RS-485 serial communication lines up to 4000 feet. Thirty-two Current Sensors can reside on one line for connection to firm’s I/O-SYSTEM or PC as a MODBUS Slave. WAGO-I/O-SYSTEM http://ept.hotims.com/34485-130

4/30/07

AUIR331x family of high-side intelligent power switch (IPS) devices provides accurate current-sensing and built-in protection circuits for automotive applications. The current-sensing accuracy, particularly at low current, enables precise monitoring of load current in order to provide additional data to the microcontroller for diagnostic applications. Typical examples include open-load detection, early warning of overload conditions or stall motor condition. Device provides a slow-switching version of the AUIR3313S, which helps minimize noise in EMI-sensitive automotive applications. INTERNATIONAL RECTIFIER http://ept.hotims.com/34485-135

Pulse, surge protection resistor boosts power rating 0402-size pulse/surge current thick film chip resistor enhances ESD protection. The SG73P (pulse) and SG73S (surge) series chip resistors provide an improved power rating (0.125W), twice the power rating of firm’s standard RK73 0402-size resistor. The thick film chip devices boost performance in pulse and/or surge handling, with a resistance range between 1ohm ~ 10Mohm. Devices provide a T.C.R. of ±100ppm/K, with tolerances of ±0.5%, ±1%, ±2% and ±5%. Trust/EP&T7x10 KOA SPEER ELECTRONICS

Intelligent power switch delivers current sensing in auto Apps

4:54 PM

Programmable rotary position sensors use magnetic pick-up Vert-X 22E Series of programmable touchless rotary sensors use a magnetic pick-up that is secured to the rotating object, so that there is no direct mechanical linkage between the shaft and the measuring system, and therefore no wear. Devices can be programmed by customers or at the factory for the slope of the linear output, zero and end-points, mid-point and switch steps. As a result, customers can optimize this angle sensor for their specific application. Page 1 NOVOTECHNIK http://ept.hotims.com/34485-136

http://ept.hotims.com/34485-131

Small power rocker switch fits compact spaces

responsiveness reliability

Small size RL3-10 power rocker switch is suitable for compact space applications. Device provides a UL rating at 10A 125Vac, and VDE rating at 6(2)A 250Vac T125. Product’s fully compliant with RoHS requirement. Device snaps into panel cut-out 13.0 x 19.2mm. The function is DP On/ Off On/On, On/Off/On and one side momentary. Device is made of PA66 nylon, silver alloy contacts and silver plated quick connect terminals. Standard marking and custom color is available. PHASEDA

control ownership

What does it take to distribute confidence?

endurance listening access innovation speed

http://ept.hotims.com/34485-132

trust initiative performance respect discipline

Submersible cermet panel potentiometer is IP68 sealed P13SM Submersible cermet panel potentiometer is fully IP68-sealed against deep-sea water. Device provides a stainless steel shaft and bushing, and is designed for applications in which electrical parameters need to be set with an immersed potentiometer in deep-sea saltwater conditions up to 30 meters (100 feet). Device achieves corrosion resistance times of up to 960 hours in a salt spray test. VISHAY INTERTECHNOLOGY http://ept.hotims.com/34485-133

competition value depth Industry-leading companies like Honeywell Sensing & Control put their trust in us. So can you.

Ultra-miniature tact switch measures 3mm x 2.6mm x 0.65mm and provides 100,000 cycle life expectancy and 2 gram force options. Devices specificatons include an electrical rating of 20mA 15Vdc; contact resistance of 500m-ohm (Max); insulation resistance of 100M-ohm (Minimum at 500Vdc); and a dielectric strength of 250Vac for 1 minute. E-SWITCH http://ept.hotims.com/34485-134

w w w. e p t . c a

agility

Honeywell S&C needed a distributor partner they could trust to support their sensor, control and switch product lines. They chose us for our innovative approach to customer service, especially the way we support critical turn-around times and design requirements. So, whether you need quality switches for precise or high volume applications,

Tact switch is ultra-miniature

clout

sensors for critical environments or control products for demanding applications, we can meet your needs. We are your preferred source for Honeywell S&C and more. Contact your local service center or Sager sales representative at 1.800.SAGER.800 or visit us at www.sager.com.

Sager. Distributing Confidence.®

execution service

switches & circuit protection

electronic products and technology • september 2011

Criteria for CORRECT FUSE SELECTION Circuitry overcurrent protection rarely receives the attention it deserves. An inadequately thought out selection of fuses can lead to the breakdown of equipment and installation, resulting in high replacement costs and dissatisfied customers. This technical article focuses on the correct selection criteria for fuses and fuseholders. The function of a fuse is to interrupt an uncontrolled fault current or overcurrent before serious damage can occur, such as the overheating of equipment. Because a fuse is designed using a fusing element, it is particularly suited for reliable interruption of short-circuits. With overcurrents up to 2x or 3x the rated current, a fuse becomes less accurate and, as such, not so well suited for these conditions. Other overcurrent protection measures such as electronic protection, thermal overload elements or additional fuses are then necessary. Normal operation after switching ON is explained under Point 1. This point should always be taken into consideration.

Table 1: Pre-arcing time of a fuse according to UL 248-14

Point 2 is only necessary with capacitive loads, present when the charging of capacitors after switching ON, leads to high in-rush current peaks and the rated current of the fuse is exceeded by many multiples. Important facts with regard to fuseholders are given under point 3, where the correct selection of fuse and fuseholder combinations is explained.

Point 1: Normal Operation After Switching ON Under normal operating conditions, a fuse is subjected to a maximum operating current and a maximum operating temperature. A derating of the rated current is therefore usually necessary since a fuse is rarely operated at the set ambient temperature of 23°C according to IEC. Fuses can be in accordance with IEC 60127 or UL248-14. Because of the different definitions between the two standards, fuses are not directly interchangeable as follows: fuses in accordance with IEC 60127 may be operated continually at 100% of the rated current value, whereas fuses in accordance with UL 248-14 only at 75%. UL 248-14 specifies a minimum of 4h operating time at rated current (Table 1).

Table 2: Versions of UMT 250 with details of the melting integrals, voltage drops and power losses for every current rating

The self-heating effect of time-lag fuses is less than that of quick-acting. This can be seen from the typical values of voltage drop. For example, a 2 A 5x20 mm glass time-lag fuse has a typical voltage drop of 60 mV, whereas a typical quickacting version is 90 mV. This difference is evident by the thicker fuse element (higher melting value I2t, see point 2) that is necessary for time-lag fuses. It should also be noted that fuses are heated by the current until a certain temperature has been reached when the Fig. 1: Typical start-up in-rush curve of an SMPS when fuse element melts (opens) capacitors need to be charged and interrupts the circuit. All measures for cooling such UMT 250, the 1 A rated current fuse has as ventilation, heat sinks, large solder an I2t value of 2.8 A2s; that is, with an surfaces or heat accumulators change the overcurrent (short-circuit) or an in-rush time/current characteristic of the fuse current peak in excess of this value, the and thus should be avoided. fusing element melts and interrupts the circuit. In this example, the I2t value Point 2: of the fuse (2.8 A2s) is higher than the In-Rush Current Peaks calculated value (1.748 A2s); that is, the selection would be correct for this In-rush current peaks (Fig. 1) arise application. through capacitors that are initially In-rush pulses, particularly when they charged when switched ON. These pulses occur often, cause fuses to age premacan be many multiples of the rated curturely. This can lead to failures in the rent of the fuse, but field later on, which can be avoided are mostly of a very using this calculation. In order to obtain short duration. a high I2t, time-lag fuses usually have a The area beneath tin-plated melting wire. Over time, the the curve is called the tin diffuses in the wire, which leads to a melting integral or I2t change in the time/current characteristic value. The I2t value is of the fuse. In general, quick-acting fuses defined as that amount are more resistant to pulses than timeof energy necessary to lag, but time-lag fuses need to be used heat up and melt a because of their higher I2t capability wire or fuse element. values than those for quick-acting. Generally this is an exponential curve having a peak current Point 3: value of Ip over a Combination of Fuses period of time called T, and Fuseholders at which point the current has reached 37% 5x20 mm fuses are used widely in of the peak current value. As an example, industrial applications, since they are let’s take Schurter’s time-lag SMD fuse easily available worldwide and can be UMT 250, 1 A. replaced by the end customer or a service The I2t-value can be calculated with technician. In applications such as these, the following formula using a peak cura fuseholder is usually needed. Like rent of Ip = 13 A and a t = 6 ms: fuses, the difference between IEC and I2tApplication =0.5*Ip 2*t UL standards also needs to be observed I2tApplication =0.5*(13 A)2*6 ms=0.507 when selecting fuseholders. Fuseholders A2s approved to the IEC 60127-6 standard In addition to the start-up current, need to fulfill, amongst other requirethe number of pulses over the life of the ments, the following: rated power accepequipment must be taken into account tance (e.g. 2.5W / 10A @ 23°C), rated since premature ageing of the fuse needs current (e.g. 10A) and rated voltage (e.g. to be considered. A factor of 0.29 is used 250V). For fuseholders approved to UL 512 and CSA C22.2 no. 39, only the rated for 10,000 pulses with time-lag fuses (see current (e.g. 16A) and rated voltage (e.g. Table 2). 250V) are specified. I2tmin_Fuse_T =I2tApplication /F The maximum rated current with UL is I2tmin_Fuse_T =0.507 A2s/0.29=1.748 usually higher than IEC because of the A2s following reasons: Manufacturers provide the melting IEC uses a dummy fuse, e.g., 40mOhm integral value in the catalog, for each = 4.0W / (10A)2 (Fig. 2). This dummy fuse type and rated current. For example, fuse, together with the contact resistance (Table 2) with the IEC time-lag SMD fuse between fuse and clip generate heat. The fuseholder must withstand this condition for 500h and accessible parts are not allowed to exceed a temperature of 85°C. On the other hand, UL/CSA uses a silver tube having =0Ω (Fig. 3). That means heat is only produced by the contact resistance between fuse and clip, Fig. 2: IEC test with dummy fuse

Fig. 3: UL/CSA test with silver tube

continued on page 30

http://ept.hotims.com/34485-29

full online product listings at ept.hotims.com

You will benefit with Noritake CU-Y!

LCD Footprint available International font sets

1U rack height models

8-bit Parallel Interface 8-bit Parallel Interface 8-bit DATA

CU-Y Vacuum Fluorescent Display modules provide so much more than LCD modules.

HOST HOST

Code library now available. • More information in the same LCD footprint. • Foreign languages accessible using built-in international font sets. • 4 line models fit in 1U rack height. • Highlight menu for selection emphasis.

8-bit DATA WR BUSY WR BUSY

CU-Y CU-Y

Asynchronous Serial Interface AsynchronousSIN Serial Interface HOST HOST

VFD Module Features

• Easy to read vibrant emissive display. • Available in character and dot matrix displays. • Serial and parallel interface • Quick responsive displays. • -40°C to +85°C operating temperature, no heater required. • Wide viewing angle. • Operating humidity of 20% to 80% RH (non-condensing). • VFD modules are rugged with high tolerance to vibration and shock.

Brightness controls

CU-Y videos on youtube: http://itron.tv/YTYS

SIN BUSY BUSY

CU-Y CU-Y

(Synchronous Serial Interface also available)

* Serial Input

Did you Know

Color filters can be applied to alter the emitted light. applied to alter the emitted light.

See all of our CU-Y VFD modules @ http://itron.tv/CYS1 Noritake Co., Inc. 2635 Clearbrook Drive Arlington Heights, IL 60005

(847) 439-9020

www.noritake-elec.com/

@Noritake VFD

@noritakevfd

expressmart / advertisers' index

express

electronic products and technology • september 2011

mart

Proof at 100%

PCB Design Services

InfiniiVision X-Series Oscilloscopes In Stock. Immediate Delivery!

The InfiniiVision 3000 X-Series offers entry-level price points to fit your budget with superior performance and optional capabilities that are not available in any other oscilloscope in its class. Our break-through technology delivers more scope for the same budget.

www.gapwirelessonline.com Tel: 905.826.3781 info@gapwireless.ca

New Rack Cabinet has Highest EMI/RFI Protection

• Professional PCB layout and schematic capture • Quick prototyping services • Experienced design team • Dependable services

In the field of security, TEMPEST requirement NSA 94-106 is among the most stringent. Equipto Electronics new R6 Rack Enclosure far exceeds this standard for EMI/RFI protection, keeping your secrets in or nasty external signals out.

Our designer is the extension of your staff. We are your PCB design center and outsourcing partner.

Boardtech Integration

New OLED DMM’s, and much more

www.equiptoelec.com

155 Tycos Dr, Unit 37, Toronto ON M6B 1W6 www.boardtechintegration.com • Tel: 416.399.6297 info@boardtechintegration.com tom.l@boardtechintegration.com

http://ept.hotims.com/34485-31

Tel: 800.204.7225 ext. 9 • 630.859.7840 Email: sales@equiptoelec.com (Aurora, IL) ISO 9001:2008 • RoHs Compliant

http://ept.hotims.com/34485-32

engineering TECHNICAL TECHNICAL && WHITE WHITE PAPERS PAPERS

http://ept.hotims.com/34485-33

http://ept.hotims.com/34485-34

Correct fuse selection continued from page 28

AN INTRODUCTION TO INDUSTRIAL ETHERNET CONNECTION SYSTEMS

which leads to the fact that a fuseholder tested under UL/CSA conditions can withstand a higher rated current than those tested under IEC conditions. Since every fuse has its own resistive Unlike traditional office settings, Ethernet has value and thus generating heat, the IEC consideration is closer to spread into environments where protection from reality. The UL/CSA really only tests the fuseholder itself, which noise, solids, liquids and does not simulate real world application. even gases is of concern. The fuse standards (IEC 60127-2 to 4) check general electrical Conditions in these enviproperties such as, for example, the minimum/maximum preronments warrant the use arcing times. The standard for fuseholders (IEC 60127-6) checks of industrial grade conFig. 4: Derating curve of a shock-safe fuseholder thermal properties such as conditions of temperature at rated nectors and connection as e.g. FPG1 power and current over an operating period of 500h. Therefore, systems which can be found in Metz Connect’s the customer is obliged to carry out his own calculations. The STEADYTEC product line. following approach is well tried and tested: For example, we expect to have an operating current of 5 A @ 60°C. As a result of the increased temperature in the www.riaconnect.com fuseholder, derating, as described under point 1, must also be taken into consideration. In the example, the derating for RIA Connect, Inc. standard fuses is around 20%, which means a rounded up current rating of 6.3 A (5A / 0.8). The fuse power dissipation is calculated with the rated current and typical voltage drop value (voltage level over the http://ept.hotims.com/34485-35 fuse at rated current) according to the catalog. Ceramic fuses such as, SPT 5x20, 6.3 A have a typical voltage drop of 70 mV at rated current. PFuse = IN*UVoltage Drop_typ Absopulse Electronics Limited . . . . . 10 PFuse = 6.3 A*70 mV = 441 mW Agilent Technologies Canada Inc. . . OBC With a fuseholder, e.g. FPG1, having a rated power acceptance of 2.5W Alpha Wire Corporation . . . . . . . . . . . 22 @ 10A, the recommended derating curve as shown in Fig. 4 must be taken Avnet EM(AZ) . . . . . . . . . . . . . . . . . . 15 into account. At 60°C and a rated current of 5 A, the curve I = << In, is Birde Marketing Inc. . . . . . . . . . . . . . . 20 used since the operating current is 5 A and the admissible current of the fuseholder under IEC is 10 A. In the example, this gives a maximum rated Boardtech Integration . . . . . . . . . . . . 30 power acceptance PFuseholder of 1.3 W. Comtree Inc . . . . . . . . . . . . . . . . . . . . . 6 According to the IEC standard, the contact resistance Rc between fuse Conec Corp. . . . . . . . . . . . . . . . . . . . . . 3 and clip is a maximum of 5 mΩ. Power dissipation can be calculated using Canada’s premier series of Digi-Key Corp . . . . . . . . . . . . . . . . . . . . 5 the following formula: electronics trade shows are back for 2011... Electro Sonic . . . . . . . . . . . . . . . . . . . 18 PContact= Rc*IN2 ELMA Electronic Inc. . . . . . . . . . . . . . 28 This is your opportunity to see thousands of products PContact= 5 mΩ(6.3 A)2 =198 mW EMX Enterprises Ltd. . . . . . . . . . . . . . 20 in person and discuss issues with knowledgeable exhibitors Correct dimensioning can be ascertained through the use of the followwho know their products in a face-to-face setting. Equipto Electronics . . . . . . . . . . . . . 30 ing equation: Fibox . . . . . . . . . . . . . . . . . . . . . . . . . 12 PFuseholder = 1.3 W Fluke Electronics . . . . . . . . . . . . . . . . 12 PFuse+PContact = 441 mW + 198 mW GAP Wireless . . . . . . . . . . . . . . . . . . . 30 PFuse+PContact = 639 mW Hammond Mfg. Co. . . . . . . . . . . . . . . IBC Combination is correct layed out, when September 20 • 10am - 4pm Irwin Industrial Agencies Limited . . . . . 4 PFuseholder > PFuse + PContact Mouser Electronics . . . . . . . . . . . . . . . . 7 The following operational modes can be an additional burden to the fuseMurata Power Solutions . . . . . . . . . . . . 8 holder and must be specially evaluated: changes in electrical loads, continuSeptember 22 • 10am - 4pm NEWARK . . . . . . . . . . . . . . . . . . . . . . . 23 ous operation (>500h) at currents >0.7*IN and the effects of ventilation, cooling, heat accumulation, etc. Even after consideration of these selection Noren Products . . . . . . . . . . . . . . . . . 13 criteria, extensive tests under worst-case conditions are critical in order to Noritake . . . . . . . . . . . . . . . . . . . . . . . 29 ensure safe and reliable operation in equipment and installations. ODU USA Inc. . . . . . . . . . . . . . . . . . . 17 October 20 • 10am - 5pm

ADVER TISERS’ INDEX

Omega Engineering Inc. . . . . . . . . . . . IFC Omnetics Conn. Corp. . . . . . . . . . . . . 22 Phoenix Contact Ltd. . . . . . . . . . . . . . 21 Protocase . . . . . . . . . . . . . . . . . . . . . . 25 Radian Heatsinks . . . . . . . . . . . . . . . . 14 RIA Connect . . . . . . . . . . . . . . . . . . . 30 Sager Electronics . . . . . . . . . . . . . . . . 27 Samsung . . . . . . . . . . . . . . . . . . . . . . . 11 Samtec . . . . . . . . . . . . . . . . . . . . . . . . 19 Schleuniger . . . . . . . . . . . . . . . . . . . . 16 Schurter Inc. . . . . . . . . . . . . . . . . . . . . 26 TDK- Lambda Americas Inc. . . . . . . 9 (insert), 24, 30

2011

QUEBEC CITY/STE. FOY HALIFAX

MISSISSAUGA

For more information on fuses and/or Circuitry overcurrent protection from Schurter Inc., go to http://ept.hotims.com/34485-137

SCAN HERE

www.ept.ca/eptech/

FREE SCAN HERE

Registration! Free Parking

http://ept.hotims.com/34485-38

http://ept.hotims.com/34485-36

http://ept.hotims.com/34485-39

http://ept.hotims.com/34485-37

http://ept.hotims.com/34485-40

http://ept.hotims.com/34485-41

Hello future.

Oscilloscopes Redefined Starting at $1,230*

Agilent 2000 X-Series (MSO and DSO)

Agilent 3000 X-Series (MSO and DSO)

Popular Competitor's Series (MSO and DSO)

Bandwidth (MHz)

70, 100, 200

50, 70, 100, 200

100, 200, 350, 500

100, 200

Max sample rate

2 GSa/s

4 GSa/s

1 GSa/s

Max memory depth

100 kpts

2.5 kpts

4 Mpts

1 Mpt

Max update rate (waveforms/sec)

50,000

200**

1,000,000

5,000

Fully upgradable

Yes

Function Generator

Yes

Notes:

ÂŠ 2011 Agilent Technologies, Inc. *All prices are in USD and subject to change

Popular Competitor's Series (DSO)

Agilent and our Distributor Network Right Instrument. Right Expertise. Delivered Right Now.

**Refer to Agilent Pub 5989-7885EN for update rate measurements Data for competitive oscilloscopes from competitor publications 3GW-25645-0 and 3GW-22048-1

See the difference today. 800-732-3457 www.testequity.com/agilent

http://ept.hotims.com/34485-42