Our Stellar Slimline Aluminium Bifold Doors are manufactured to the highest standards to deliver outstanding product performance.
• Superb slimline aesthetics
• Faster installation with patented pre-gasketed knock-in beads
• Tailed glazing gaskets and under-glass seal for enhanced thermal performance
• Slimline 117m meeting stile
• 28mm, 36mm, and 44mm glazing options
• Choice of colour options manufactured to Qualicoat specification
Authentic
Cleaner
Preserves
Ideal
Highly anticipated, the publication of the consultation on the Future Homes and Building Standards will send shockwaves through the window and door industry but for a completely unexpected set of reasons according to Rob McGlennon, Managing Director, Deceuninck.
A consultation document has rarely been anticipated more. After four years of speculation, the Consultation on the Future Homes and Buildings Standards was finally published on 13th December.
Having been braced for a new notional value for new build of 0.8 W/m2K, the news that there would be no further increase in performance beyond the 1.2W/m2K introduced in the revision of Part L in June 2022, was at once a relief and a disappointment.
A disappointment because as industry it is our role to look to the future, to innovate and to design and develop new and better windows and doors which require less energy and carbon in manufacture, and which deliver further carbon savings through life.
A relief because at an initial reading it appears that we won’t have to move to triple-glazing to meet future requirements, but that’s at the first reading. The consultation has an unexpected sting in its tail - The Home Energy Model.
This has ramifications almost as big for fabricators as any u-value of 0.8 W/m2K might have done because it has the potential to bring the industry back to exactly the same place - triple-glazing!
The proposed Home Energy Model is according to the authors of the consultation ‘based on the latest evidence and is more sophisticated than SAP’. In the belief that you get out, what you put in, they highlight that the use of the standard sizes to work out u-values is problematic.
The proposal instead is to use ‘either the actual size and configuration of the window or door, or measured using the appropriate hot box method set out in the BS EN ISO 12567 series’.
This effectively means modelling each specific window configuration - and that creates a challenge because most of windows supplied in a real-world context are smaller than the ‘standard’ window configuration (1230x1480 open/fixed).
The smaller the glazed area, the harder it is to achieve a u-value of 1.2 W/m2K. This is especially problematic where steel reinforcements are required.
If the model is adopted, for a lot of window and door systems that brings us right back to where we started, triple-glazing.
It will also place new onus on fabricators to evidence compliance on a product-by-product basis. It is worth noting that under current arrangements under Part L, the definition of ‘new build’ extends beyond volume installations to individual builds and extensions.
Again, we have to play the waiting game, to feedback on the consultation and play our cards once the dust settles and the regulation is written.
Christina Shaw
PAGE 7
FAIRCO TRADE FRAMES CHOOSES HAFFNER FOR BUSINESS GROWTH
PAGE 11
CHOOSE WINDOW WAREHOUSE AS YOUR TRUSTED SUPPLIER FOR 2024…
Our Stellar Slimline Aluminium Bifold Doors are manufactured to the highest standards to deliver outstanding product performance.
• Superb slimline aesthetics
• Faster installation with patented pre-gasketed knock-in beads
• Tailed glazing gaskets and under-glass seal for enhanced thermal performance
• Slimline 117m meeting stile
• 28mm, 36mm, and 44mm glazing options
• Choice of colour options manufactured to Qualicoat specification
As an acknowledged specialist in dealing with the presence of lead paint, as well as the restoration of all types of metal windows, Associated Steel Window Services (ASWS) has carried out a detailed contract on behalf of Collins Construction during the refurbishment of 35 Dover Street in London.
The London-based company was selected to carry out the painstaking work, which required multiple applications of a nontoxic poultice strip, as the result of its previous involvement with the main contractor on other high profile projects.
PAGE 15
EPWIN WINDOW SYSTEMS FURTHER ENHANCES PATIOMASTER’S SECURITY CREDENTIALS
PAGE 17
MARK SAFETY GLASS FASTER WITH CRL SANDBLAST KITS
Christina Shaw Editor M: 07805 051322
E: christina@fenestrabuild.co.uk
Emma Champion Advertising Manager
M: 07508 263262
E: emma@fenestrabuild.co.uk
Justin Lazenby Finance Director / Press Release Enquiries
M: 07711 828710
E: justin@fenestrabuild.co.uk
Chris Champion Editorial Enquiries M: 07850 267223
E: chris@fenestrabuild.co.uk
Jordan Beaumont Graphic Design
E: jordan@identifywebdesign.co.uk
TEL: 01302 278756
FAX: 01302 247612
EMAIL: christina@fenestrabuild.co.uk
WRITE TO US: 19 Heather Close, Tickhill, Doncaster, DN11 9UU
PAGE 21 5 STAR REVIEW FOR CARL F GROUPCO’S NEW 3* CYLINDER
PAGE 25
HERITAGE TRADE FRAMES UNVEILS NEW SHOWROOM AND TRAINING FACILITY
Fenestra Build™ is a registered Trademark. The views contained herein are not necessarily those of Fenestra Build™ and whilst every effort is made to ensure information throughout is correct, Fenestra Build™ does not accept liability for errors. The views expressed by contributors and the content of letters, are not necessarily those of
Northern Ireland’s Fairco Trade Frames was established in 2021 to help meet the needs of the Irish trade community. When setting up its manufacturing facilities, the team made a strategic decision to collaborate with award-winning machinery specialists, Haffner. This decision has proven to be one they unequivocally stand by, reflecting the success and satisfaction derived from the partnership.
Fairco’s General Manager Gary Malone explains: “Based on our direct experience with the quality and innovation of Haffner’s machines in a prior business, the decision to collaborate with Haffner in our new venture was immediate. From the initial machinery audit, their guidance, support and rapid turnaround ensured a prompt and efficient start, allowing us to be operational very quickly.”
Fairco operates from a 15,000 sq ft facility in Carrickfergus, Northern Ireland, where its Haffner equipment includes an SBA-2 PVC-U Profile Machining Centre, an SMR 5 Five Head Welding Machine, a KB 515 Single Head Welding Machine, an SVK-2 CNC Corner & Transom Cleaning Machine, a DV 404 Reinforcement Profile Screwing Machine, a TC 294/20 Glazing Bead Saw and an MS 300 Measuring & Stop System.
Gary commented: “We appreciate the speed, accuracy and quality of the Haffner machines in helping us deliver on our commitment to excellence at every level.”
Fairco also has an ongoing maintenance contract with Haffner to ensure its machines are always working at their optimum. Gary said: “The hands-on approach of the Haffner team is invaluable. We work closely with Chris Curran, Technical Sales Manager at Haffner, and we’re further supported by service engineer David Carruthers. Together, they ensure we are making the most of our investment.”
Fairco Trade Frames has gone from strength to strength since 2021 and has recently been nominated in the Northern Irish Enterprise Awards 2023. The company works across the retail and trade markets and its products include its Hampton Flush Glaze Windows range, Imagine Patio Doors and Matrix Fully Sculptured Windows and Doors.
As the UK’s exclusive supply partner of Graf Synergy machines, Haffner delivers the seamless weld machine innovation to take your business to the next level.
• Superior transom welding quality
• V-Perfect ® transom welding technology
• Weld seam elimination
• Suitable for both V Joints and Butt Joints
• Precision accuracy - delivering a perfect weld every time
• Faster, automated fabrication
Discover more of the benefits of Graf Synergy machines from Haffner
Dundee’s Ecofit Windows & Doors has turned a corner of the traditionally blue Dens Park orange and black.
The Tayside company has recently signed a sponsorship agreement with Scottish Premier League side Dundee FC that will see Ecofit’s distinctive orange and black branding pitch side at Dens Park.
The decision to do so comes on the back of a sustained period of growth for the company, which is benefitting from its decision to join the Conservatory Outlet Network. Since linking up with the renowned manufacturer, Ecofit has gone from strength to strength and has increased its sales by 55% in the past two years. They’ve also benefited from a state-of-the-art website being designed and developed for them, and wider marketing and business support.
Alongside its marquee positioning at Dens Park, Ecofit is also increasing their physical marketing footprint across Dundee. The company, led by longtime business partners Paul Reid and Garry Myles, are launching an additional targeted marketing campaign that aims to solidify the firm’s reputation for delivering high-class, quality and affordable installations across the city of Dundee and the regions of Fife and Angus.
It is an exciting time for Ecofit, as company Director Paul Reid explains: “2023 has been a fantastic year for us. We’ve seen terrific growth in the face of some adverse trading conditions. Taking further steps to solidify our brand and market share in the local area is all part of our plan to continue to grow the business.
“Working with Dundee FC and Dens Park was an obvious choice for us. We’re thrilled with the reaction and interest that the campaign has received so far; the extra eyes on the Ecofit brand name will only be a positive as we continue to expand the business over the next couple of years.”
In early 2024, work will be completed extending the company’s headquarters in the bustling West Pitkerro Industrial Estate. The investment will double the amount of showroom and office space the company has and will comfortably accommodate the rise in footfall that Ecofit has seen in the past twenty-four months.
As we are a trade-only fabricator, we can focus on giving you the products and service you need to grow your business.
• Windows
• Doors
• Conservatories
• Conservatory Roofs
• Marketing, Technical & Sales Support
• Flush Sash Windows
• Patio and Bi-Folding Doors
• Leka and Leka Xi Roofing Systems
• Ultraframe and Wendland Roofs
Choose Window Warehouse this year as your trusted trade supplier and introduce our UPVC Vertical Sliding windows to your homeowners. Crafted with a fully sculptured outer frame, runthrough sash horns, and a deep bottom rail, these windows boast a flawless design from every angle. The tilted sashes facilitate easy cleaning, and you can assure homeowners these windows will be secure and robust.
With an array of smooth and woodgrain finishes available, there is also an option for Georgian and astragal bars. Ensuring thermal efficiency these windows have impressive U-values as low as 1.4W/m2K when double-glazed. Boasting a 2-3 week lead time on white and standard foil profiles we ensure swift and timely delivery, including site drops if required.
Along with our Vertical Sliders, we proudly manufacture our exquisite Flush Sash windows in both UPVC and Aluminium. Both allow for a secure and protected home with a multi-point locking system. In UPVC these have a 70mm profile with outer frames in either 56mm or 72mm. Engineered for superior energy performance, these windows achieve U-values as low as 1/1W/m2K when triple-glazed and 1.4W/m2K when double-glazed. We take pride in our commitment to prompt and efficient service, offering a remarkable lead time of 7-10 days on standard foil profiles.
For those who appreciate the sleek look of aluminium our flush sash windows offer style and thermal insulation, with a 70mm profile and U-values as low as 1.4W/m2K. For 2024 we have introduced reduced lead times for stock colours in aluminium. Bifolds now have a lead time of 7-10 days, while all other aluminium windows, doors, and commercial projects are now 3-4 weeks.
Visit our website to find out more about our products www.window-warehouse.co.uk. To speak with our sales team call 02392 327744 or email info@window-warehouse.co.uk.
Schüco is delighted to announce that entries are now open for the 2024 Schüco Excellence Awards, marking the eleventh year of the event. These industry-renowned awards celebrate outstanding design incorporating Schüco façade, window, and door systems. Presented in partnership with Architecture Today, the awards recognise creativity, innovation, technical expertise, and collaboration to deliver architectural intent.
Participation is open to architects and specialist contractors showcasing projects that integrate Schüco aluminium and steel products and systems. Winning projects will be announced at a celebratory awards lunch to be held at The Pelligon (formerly known as East Wintergarden), Canary Wharf, London on 27th June 2024.
Schüco welcomes entries that cover projects both large and small, in urban and rural locations, and designed by practices and specialist contractors of all sizes. Winners will feature in a special awards supplement published in Architecture Today and in a special feature online.
Architecture Today editor Isabel Allen will serve as the chair for the 2024 judging panel, which comprises eight industry experts, including engineers, architects, and façade consultants.
The awards ceremony will honour accomplishments in eleven categories, featuring perennial favourites like the Individual House Award, which attracts a high calibre of creative entries, as well as newer additions such as the Major Project Award, introduced last year for buildings with at least 1,000 square metres of Schüco façade. Other categories include awards for Commercial and Mixed-Use developments; Education buildings; Health, Culture and Leisure buildings; Individual House Improvement; Refurbishment and Adaptive Reuse projects; Residential developments; Specialist contractors; Steel projects and Sustainability projects.
The deadline for entry is Friday 12th April. For full details and to enter, please visit: https://excellence-awards. awardsplatform.com
Fentrade’s design flair has come to the fore with a series of projects displaying its innovative use of aluminium for interior finishes. Chris Reeks, Managing Director at Fentrade, commented: “The ID30 Internal Door and Screening System is a fabulously versatile system. We’ve recently created several projects for homeowners who want to achieve a modern, contemporary aesthetic.”
In one recent example, Fentrade’s design team developed a specification for a project involving an ID30 Door and internal staircase. Chris commented: “The ID30 offers scope for experienced designers to think outside the box. In this project, for example, we complemented the ID30 doors by creating a stylish set of internal bannisters from standard aluminium.”
The ID30’s versatility means it has quickly become a popular choice with Fentrade’s customers. Chris said: “As well as the more innovative projects, our customers have used the ID30 system across domestic and commercial settings, as internal door and screens, as office partitions and to create shower and bathroom spaces.”
The versatile system features single and double hinged entrance doors, as well as single and double sliding door sets. All options can be customised with colour, glazing choices and door furniture options.
As these projects show, the Fentrade team is always on hand to add value. Chris said: “As an experienced aluminium fabricator, we are committed to offering our customers the service they need. High quality manufacture, rapid turnaround times and complete reliability are just the start. We can also offer design and specification input when required, helping our customers to push the boundaries of product design and functionality and achieve outstanding results for homeowners.”
Fentrade is an award-winning trade aluminium fabricator manufacturing a comprehensive range of windows, doors, curtain walling and shop fronts at its manufacturing centre in Newport, South Wales. Its trade and commercial customers value its customer-focused approach and commitment to quality at every level. As these impressive design results show, this commitment delivers exceptional results.
fentradealuminium.co.uk
Scan to View the Iron Guard 3* Cylinder Range
T: 01733 393330 (Peterborough)
T: 01236 721557 (Cumbernauld)
E: sales@carlfgroupco.co.uk @carl_f_groupco
F Groupco
F Groupco
Epwin Window Systems has further enhanced the security credentials of its PatioMaster Sliding Door System with the introduction of a new and exclusive Yale 10-Point Locking System.
Designed in collaboration with Yale, a global leader in security solutions, the new Yale 10-Point Locking System redefines door security by delivering the equivalent of a standard lock plus additional shootbolts at the top and bottom of the sash. By incorporating this advanced 10-point locking mechanism in addition to the Yale 3* cylinder, the PatioMaster Sliding Door System has exceeded the stringent requirements of PAS24:2022 enhanced security accreditation, underscoring the company’s commitment to security excellence.
Commenting on the upgrade, Phil Parry, Technical Director at Epwin Window Systems, said: “The introduction of the new PAS24 Yale 10-Point Locking System further demonstrates our commitment to adopting and meeting the latest industry standards. The high security locking system ensures the operational forces are within the allowable limits and delivers a step-change in door hardware security for our customers”.
Every component of the PatioMaster System is impressive and has been intelligently designed to elevate its technical performance. A new sash profile increases glazing options and means the system offers outstanding thermal performance with U-values as low as 1.0 W/m2K with triple glazing. It also has class-leading weather performance and has achieved a market-leading wind loading of 1600Pa which means PatioMaster is the superior sliding door solution for coastal or highrise properties.
Compared to mass market offerings, the PatioMaster doors are 33% stronger by design. And a new interlock prevents intruders from prising the panes open to gain entry. The door system delivers enhanced performance with superior aesthetics, while self-levelling rollers ensure an easy-glide operation, making it a pleasure to use.
PatioMaster’s impressive performance credentials make it well-suited for the diverse range of sliding doors applications, establishing the door as the superior solution for ground level, coastal and high-rise environments.
Dynamic Hardware combines hardware expertise and experience a relentless focus on excellence to give you the products that make the difference The 40 years’ industry experience of the leadership team means we know what it takes to be a supply partner you can rely on.
The wait is over; it now only takes a couple of seconds to clearly mark safety glass, with the CRL Sandblast Kits. Significantly faster than using transfers and etching methods, the kits ensure safety glass is marked to European Standard requirements in just two seconds.
Ideal for busy production environments, the CRL Blast Pack Safety Marking Kit and CRL Detailed Safety Blasting Machine Kit are straightforward to use and have everything needed to make clear marks on the glass.
The CRL blast pack safety marking kit comes complete with blast pistol for use with compressed air, one custom-made brass stencil, stencil holder, retaining ring, grit collection bag and 2.5 kg of blasting agent. The lettering is contained in a 25mm circle, for a professional finish on all types of safety glass.
The Detailed safety blasting machine, uses a stencil with smaller lettering that is contained in a 20mm circle. Custom logos in varying fonts are possible. Custom stencils are sold in packs of 5. The manufacturer suggests each stencil should provide approximately 400 marks when machine is used correctly (p.s.i. on compressor and blasting time).
For further information call 01706 863600, email crl@crlaurence.co.uk, or visit www.crlaurence.co.uk
Manufacturer of UPVC and Aluminium windows and doors
Bifolds | Sliders | Patios | Residential | Commercial
24 hour quote turnaround
Second to none customer care
7 day turnaround for UPVC windows and aluminium bi-folds
10 year guarantee on all products
Recycle skip service
Online ordering
Download our app
Get your quote now!
Visit our website www.window-warehouse.co.uk
You can also email info@window-warehouse.co.uk or call 02392 327744 to speak with a member of our sales team.
Epwin Window Systems has just launched the latest enhancement to its best-selling PVC-U Vertical Sliding Sash Window System. The new ultra-slim Vertical Sliding Sash meeting rail is just 37mm deep, faithfully replicating the appearance of traditional sash windows and adding even more heritage authenticity to the well-regarded system.
Phil Parry, Technical Director at Epwin Window Systems, said: “The PVC-U Vertical Sliding Sash Window System has always been the window of choice for conservation areas, listed buildings and period properties. The new ultra-slim meeting rail enhances these credentials even further.”
Epwin Window Systems has a long track record of continuous investment in its systems to ensure it continues to meet the long-term needs of its customers. This ultra-slim meeting rail is the latest example of this.
Phil commented: “Our sash window fabricators are some of the country’s most respected and long-standing Vertical Sliding manufacturers. Our internal design and technical teams drew on their expertise to develop an ultra-slim meeting rail that factored in all the credentials to exceed customers’ expectations.”
The new slimmer meeting rail delivers clean sightlines to maximise light source whilst still preserving the natural character of the window which is vitally important especially on heritage-sensitive projects.
The new meeting rail joins a wealth of features that help to deliver heritage excellence for every project. They include a choice of welded or mechanical joint options, run-through horns, a deep bottom rail and dedicated ancillaries and end caps.
•
•
•
•
Independent hardware distributor Carl F Groupco has reported positive feedback from its recently launched enhanced variation of the Iron Guard 3* Cylinder. The enhanced Iron Guard 3* Cylinder by Federal was introduced to the company’s extensive portfolio in November last year, and its far-reaching benefits have already proved popular with customers.
Notably impressed were longstanding Carl F Groupco customer, Universal Window Repairs Ltd of Didcot, Oxfordshire, an established manufacturer and supplier of trade windows, doors and conservatories. Known for their meticulous attention to detail and high product standards, Universal Window Repairs has partnered with Carl F Goupco since 2010.
Paul Wanless, Director at Universal Window Repairs, explains: “Having worked closely with the Carl F Groupco team, we appreciate first-hand the strength of its hardware offer. After discussions with their Regional Sales Manager, Andrew Price, about the benefits of the new enhanced Iron Guard 3* Cylinder, we were convinced of its security credentials, practicality and value for money.”
Paul continued: “The 3* cylinder provides maximum security compliance, featuring advanced elements such as a patented firing pin mechanism which engages if the cylinder is snapped. Additionally, the cam locks itself down, preventing unauthorised access and providing an additional layer of security and peace of mind for our trade partners, which is important.”
The cylinder’s advanced security features include a unique trap pin, which activates during attempted picking or bumping, locking the plug and preventing access. In both scenarios, the cylinder can still be operated safely from the inside of the property.
An added advantage is its non-handed design, with sacrificial cut features on both sides for consistent anti-snap protection, regardless of the fitting direction. For additional homeowner peace of mind, the horizontal keyway with a secure dimple cut key and the visible Kitemark on the face further enhance its security credentials. The nickel finish with a brass barrel is available in double, single, and thumb turn options, as well as keyed-alike pairs, and comes with five keys and a keycard for secure registration and reordering.
As an acknowledged specialist in dealing with the presence of lead paint, as well as the restoration of all types of metal windows, Associated Steel Window Services (ASWS) has carried out a detailed contract on behalf of Collins Construction during the refurbishment of 35 Dover Street in London.
The London-based company was selected to carry out the painstaking work, which required multiple applications of a non-toxic poultice strip, as the result of its previous involvement with the main contractor on other high profile projects. ASWS’s team of highly trained operatives was involved across four of the five storeys to the former ‘Empress Club’ and office building, striping and restoring a total of 36 large steel windows and screens.
The use of lead paint was banned 30 years ago on health grounds, which means its presence is almost always masked by later coats of modern gloss paint; but trying to remove the build up by sanding or heat risks exposing workers to inhaling the harmful heavy metal. ASWS can offer other methods of paint removal, but chemical stripping was the best option for Dover Street, to take the frames back to bear metal for repairs to commence.
Director of ASWS, Kris Bennell, commented: “The options for on-site paint removal are limited, but they do include grit blasting which can be noisy, has to be tented, and requires the provision of cleaning and changing facilities allocated just to the operatives involved. The second alternative is using hand-held chipping and scraping tools, which still generate significant vibration and dust hazards; or there is the poultice chemical removal.”
Kris continues, “At Dover Street we applied between five and seven coats of the epoxy paste to the windows – some of which were quite large – and this has to remain for 24 to 72 hours before being scraped off. Not only is the paint retained within the ‘poultice’, but the lead is neutralised and converted into a manageable form, which is bagged and removed by an approved waste management company. The actual repairs involved replacing broken hinges and some corroded frame sections and the overhaul and the fitting of new single glazing into the very shallow, 3mm upstands. We also undertook the full redecoration of the windows.”
Epwin Window Systems has published a guide to the Future Homes Consultation document to help customers navigate the detail of the proposal. Phil Parry, Technical Director at Epwin Window Systems, commented: “Our guide explains the proposal and the relevant factors of the report so our customers can fully understand the detail and implications.”
The eagerly awaited release of the consultation on the Future Homes Standard has delivered some unexpected developments for the industry including the decision to retain the current notional values, keeping them at 1.2 W/(m²K) for windows and 1.0 W/(m²K) for doors. Phil said: “Whilst the proposal to retain the current thermal efficiency requirements has attracted the headlines, now is not the time to be complacent. These proposals are in the consultation period and everyone in the industry needs to continue to make their voices heard. It’s also important to remember that this is only the consultation document so there could still be changes made depending on feedback.”
Phil continued: “One important change that the consultation proposes is to remove the standard window configuration from new building dwellings. This means that each window’s U value will have to be calculated on their actual size. In other words, even the smallest toilet window will have to comply with the requirements, which is significant.”
The new guide is available to download from the company’s Connect digital portal. The award-winning platform also has a live forum where customers can submit their own questions to Epwin Window Systems’ technical experts.
Phil said: “Given the intricacy of the consultation it is our responsibility to guide our customers through the complexities. This new guide, coupled with the online support via Connect, will deliver the clarity needed for our customers and give them the information they require to respond to the consultation document.”
The Department for Levelling Up, Housing and Communities, which is responsible for the Future Homes Standard consultation, gathered information from the industry about the future direction of Document L for this consultation. This included the Glass and Glazing Federation Document L Working Group, of which Epwin Window Systems is a part.
• Choice of welded or mechanically jointed options
• Wide variety of smooth colour or textured woodgrains
• Suitable for heritage and modern properties
• Choice of options for window personalisation
• Rapid quotation turnaround
• Expert technical support
• 30 years’ experience in sash window manufacture
Longstanding Epwin Window Systems fabricator Heritage Trade Frames has unveiled a brandnew showroom and training centre at its headquarters in Bolton. The impressive facility has been purposely designed to showcase the company’s extensive range of high-quality windows and doors, featuring products from the Profile 22, PatioMaster, and Stellar Aluminium collections.
Completed in December 2023, the newly unveiled showroom is testament to Heritage Trade Frames’ commitment to providing customers with innovative and high quality product solutions. The spacious and meticulously designed space allows trade customers to experience the craftsmanship and advanced features of Heritage’s diverse product offer.
Lee Darcy, Sales and Marketing Manager at Heritage Trade Frames, commented: “The new showroom and training centre represents a significant milestone for Heritage Trade Frames. We’re delighted with the new facility and by working closely with the Epwin Window Systems’ team, we have put together a dynamic display of products in both PVC-U and aluminium providing visitors with a firsthand experience of the exceptional quality and advanced features of our window and door solutions.”
One of the showroom’s highlights is the integration of smart technology with selected products fitted with Yale SensCheck, demonstrating Heritage Trade Frames’ dedication to staying at the forefront of industry advancements. Lee said: “Yale’s SensCheck is the next generation in smart window and door sensors, offering homeowners enhanced security and peace of mind. The Yale SensCheck Window Sensor monitors the state of the window. It can detect if the window is open, locked in a closed position, or locked in a partially closed position. If the window is tampered with the sensor will send alerts directly to the homeowner. To fully appreciate the benefits SensCheck delivers, visitors to the showroom now have the opportunity to interact with these products, gaining a greater insight into the seamless integration of the smart home solution.”
In addition to showcasing Heritage Trade Frames’ advanced product range, the new facility serves as a comprehensive training centre and meeting hub. Lee said: “The training centre will run various workshops and training sessions to ensure our customers are well-versed in the latest industry trends and technologies.”
• Unique ‘slide-on or lift-off’ design ensures simple fitting and adjustment with no reveal limitations.
• Can be adjusted on all planes, further enhancing its quick fitting properties, dramatically reducing installation time.
• Tested to BS EN:2007 Grade 5, PAS24:2016 security requirements and Secured by Design certification.
Epwin Window Systems has just announced it will be a main event sponsor at the G24 Awards.
Gerald Allen, Head of Marketing at Epwin Window Systems, emphasised the importance of the G Awards in acknowledging excellence within the fenestration industry. He said: “The G Awards recognise and celebrate excellence in our industry and are a great way to reward the commitment and continued innovation that this industry delivers. We are delighted to be a main event sponsor and support such a prestigious event.”
Tony Higgin, Event Organiser, echoed this sentiment and commented: “I am, of course, delighted that one of the biggest names in the industry has agreed to sponsor the G24 Awards. Hot on the heels of the most successful presentation night last year, their presence underlines the importance of the Awards scheme to prominent industry names.”
Now in its 20th year, the G-Awards is a unique opportunity to celebrate excellence and the wide range of award categories reflects the vibrancy and diversity of the fenestration industry. Gerald said: “The credibility of the awards aligns well with our business, and it’s one of the reasons we’ve been actively supporting this event for many years.”
In addition to being a steadfast supporter, Epwin Window Systems has also been successful in winning multiple G Awards. Notably, the company secured the Best Business Initiative of the Year at the G23 Awards for its groundbreaking Connect digital resource platform. 2023 was the first year the category of Best Business Initiative was included in the G Awards, making the win even more important. Gerald said: “Winning an award is always noteworthy but to be the first winner in a new category made it even more special.”
Established in 2004, the prestigious gala event is dedicated to celebrating innovation and exceptional performance from the best companies and the best people in the UK market. The annual awards ceremony, set to take place at the Hilton on Park Lane on Friday, November 29, has become a hallmark event in London.
Gerald concluded: “We are looking forward to November’s ceremony and the opportunity to celebrate the wonderful achievements and innovations of our industry. The evening is also a perfect opportunity to network, entertain customers and connect with fellow industry professionals. It’s one of the many reasons why Epwin Window Systems continues to support the G Awards.”
www.epwinwindowsystems.co.uk
