1 Autumn/Winter 2022/23 WWW.SEALEY.CO.UK Valid from 1st October 2022 to 31st March 2023 Model No. SEA VSE4784 arm mounting bushes on Ford vehicles. • Can be used in situ without removing the arm from the vehicle. • Also suitable for some Volvo vehicles that share the same Ford platform. • Supplied in storage case. • Suitable for the removal/installation of the front upper control arm bushes on VAG vehicles. • Can be used in situ without having to remove the control arm from the vehicle, which includes the top pinch bolt which is often seized and prone to snapping. • Time saving tool. Front Upper Control Arm Bush Tool - VAG Model No. SEA VSE4789
Trailing Arm Bush Tool - Ford,
Volvo
2 Tonne Short Chassis Trolley Jack
3 Tonne Trolley Jack
• Min./Max. Saddle Height: 130/330mm.
• Chassis Length: 450mm.
• Steel chassis with welded castor supports and one-piece hydraulic unit.
• Fitted with overload valve and finger cover for extra safety.
• Suitable for the hobby user or as an emergency mobile jack.
• Includes one-piece pumping handle and carry handle.
• Min./Max. Saddle Height: 130/520mm.
• Chassis Length: 659mm.
• Integral cog-type release mechanism and long 2-piece handle.
• Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle.
• Fitted with safety overload valve and pump-through valve to prevent handle locking once at maximum lift height.
3 Tonne Standard Chassis Trolley Jack with Axle Stands
Jack Min./Max. Saddle Height: 133/515mm. Integral American cog-type release mechanism and long 2-piece handle.
Heavy-duty castors and large saddle design ease positioning under vehicle.
• Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension.
• Ideal for loaded vans up to 3.5tonne GVW.
• Supplied with Ratchet Type Axle Stands, 3tonne (3000kg) capacity per stand, 6tonne (6000kg) per pair.
• Axle Stand Min./Max. Working Height: 285/420mm.
2 JACKING & LIFTING
(Pair) Model No. SEA 3000CXD Model No. SEA 1050CX Model No. SEA 3010CX • Min./Max. Height: 100/375mm. • Fine rolled threading and precision made thrust bearing for long-life and smooth operation. 1.5 Tonne Heavy-Duty Scissor Jack Model No. SEA 58M • Heavy-duty steel. • Powder coat paint finish. • Ø60mm Composite castors with ball-bearing swivels. • Vinyl covered back and headrest. • Size (L x W x H): 920 x 430 x 95mm. American-Style Creeper 36" with Steel Frame & 6 Wheels - Red Model No. SEA SCR75 • 3 Tonne Capacity per pair. • Manufactured from durable polypropylene. • Suitable for professional or serious DIY applications. • Maximum Tyre Width: 260mm. Car Ramps 1.5 Tonne Capacity per Ramp 3 Tonne Capacity per Pair Model No. Type Size (W x D x H) SEA CAR3000C Standard 900 x 300 x 215mm SEA CAR3000LR Low Entry 700 x 200 x 80mm Model No. SEA CAR3000C Model No. SEA CAR3000LR They are not intended for lifting the vehicle to it's repair. • Heavy base design and large jacking saddle for increased load stability. • Universal joint release mechanism allows safer, more controlled lowering of the jack. • Rocket Lift feature brings lifting arm into contact with jacking point with minimal pumps. • Polyurethane wheels for smoother manoeuvrability and helps prevent damage to workshop floor. • Magnetic wheel nut retention tray. • Protective jack handle sleeve helps prevent accidental damage to car bodywork. • 2 Year Guarantee - 2nd year subject to T&Cs and registration on website (www.sealey.co.uk). Trolley Jacks with Rocket Lifts Model No. Colour Capacity Min./Max. Saddle Height Max. Chassis Height Length Weight SEA 3040AO Orange 3 Tonne 100/533mm 162mm 740mm 37.5kg SEA 3040AY Yellow 3 Tonne 100/533mm 162mm 740mm 37.5kg SEA 3040AG Green 3 Tonne 100/533mm 162mm 740mm 37.5kg SEA 4040AG Green 4 Tonne 100/533mm 162mm 751mm 44kg Model No. SEA 3040AO OR
3-Way Fill
Type
500ml Oil Suction Syringe - Metal Body
500ml Oil Suction Syringe Composite Body
3 BATTERY CHARGER/LUBRICATION • High power, professional, cordless grease gun, developing 8000psi. • Ideal for in-field lubrication where power and speed are required. • Suitable for screw-type and standard 400g cartridges, manual or bulk filling. • Features LCD battery condition indicator, air bleed and heavy-duty aluminium pressure head. • Supplied with 18V 2Ah Lithium-ion battery and mains charger. • Supplied in storage case. 18V Cordless Grease Gun
Model
No. SEA RS1322HV Model No. SEA CPG18V • Metal can with flexible spout for directional control. • Trigger operated action for high pressure oil spray. • Capacity: 180ml. 180ml Oil Can Model No. SEA TP04 500ml Capacity. • Metal can with flexible spout and thumb operated lever action. 500ml Metal Oil Can with Flexible Spout Model No. SEA TP05 Model No. SEA AK446 • Pistol style gun with contoured pump handle. • Die-cast pump head with air-bleed valve. • 3-Way fill with cartridge, bulk or manual capability. • Rigid delivery tube and push-on hydraulic 4-jaw coupling. • Accepts standard 400g cartridges. • Delivery per Stroke: 1.25cm³. • Optional 300mm Flexible Delivery TubeModel No. GGH300.
Pistol
Grease Gun Model No. SEA AK47 • Single action composite bodied suction tube with T-bar type plunger. • Ideal for use on vehicles and machinery for removing oil from gearboxes and differentials. • Supplied with 300mm transparent flexible suction hose with Ø10mm bore.
Model No. SEA AK46 Painted cast steel tube with T-Bar type plunger. Particularly useful for removal of oil from gearboxes and differentials. Supplied with 300mm flexible suction hose.
1000A 12V RoadStart® Emergency Jump Starter Model No. SEA RS1 • Cable & Cable Length: 0,72m. • LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. • Features independant on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night. • Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. • Features a USB outlet (5V/1A). 900A 12V RoadStart® Emergency Jump Starters - Hi-Vis Model No. Compressor SEA RS1312HV ✘ SEA RS1322HV ✔ • Cable & Clamp Length: 0.5m. • Delivers up to 1000 Peak Amps of initial starting power. • Suitable for starting 4-cylinder petrol or diesel engines up to 2L. • Starts up to 30 cars before recharging, depending on the length of crank time needed to start each one. Monitor power pack condition using TEST function. • Display via 5 LED indicators. • Use as a 12V power supply too - includes a vehicle accessory socket. • Supplied with mains charger.
•
8L
•
•
•
7.6L Oil/Fluid Drain Pan
Made
17L Antifreeze/Fluid Drain Pan
from high-density Polyethylene with UV stabiliser.
• Suitable for antifreeze changes.
• Features anti-splash lip that contains fluid when carrying or pouring.
• Large handles and enclosed pouring spout aids return
17L Oil/Fluid Drain Pan
10L Oil/Fluid Drain &
4 LUBRICATION
Suitable for oil or coolant and large enough for single oil change on smaller engines.
Includes oil pouring lip, hanging hole and back shelf with protruding stub for draining oil filters. 4.5L Oil Drain Pan Model No. SEA DRP00
Made from high density polyethylene with UV stabilisers. • Large enough for single oil change. • Includes oil pouring lip, hanging hole and back shelf with protruding stub for oil filters.
Oil/Fluid Drain Pan Model No. SEA DRP01
from high-density Polyethylene with UV stabilisers. Features anti-splash lip that contains fluid when carrying or pouring. Large handles and enclosed pouring spout aid return of oil/fluid to recycling container.
Model No. SEA DRP02 Model No. SEA DRP03 • Made from high-density Polyethylene with UV stabiliser. • Heavy wall construction stays rigid, even with hot oil. • Suitable for multiple oil changes. • Features anti-splash lip that contains fluid when carrying or pouring. • Large handles and enclosed pouring spout make easy work of returning oil/fluid to recycling container.
Model No. SEA DRP04
Made
of oil/fluid to recycling container. • Colour-coded to help keep different fluids isolated and reduces cross contamination. • Approximate Diameter: Ø460mm. • Height: 150mm.
Model No. SEA DRP07 • Suitable for both the DIY user and professional mechanic. • Purpose-made for the recovery of oil and antifreeze. • Polyethylene with UV stabiliser. • Heavy wall construction stays rigid, even with hot oil. • Excess capacity helps prevent overflow or spillage.
Recycle Container Low Profile Drip Trays • Zinc plated pan, ideal for oil changes, cleaning and storing vehicle components. • Not only suitable for oil changes, these zinc plated pans are ideal for cleaning and storing vehicle components. • May also be used as drip trays under vehicles. Model No. Capacity SEA DRPM1 9L SEA DRPM2 12L SEA DRPM4 20L Model No. SEA DRPL09 Model No. SEA DRPL15 Model No. SEA DRPL25 Metal Drain Pans Model No. SEADRPM1 Model No. SEADRPM2 Model No. SEA DRPM4 • Low profile drip trays manufactured from hard-wearing recycled polypropylene. • These have a broad appeal to both the classic car user and general mechanic. • Purpose-made for the recovery of oil and fluids, these drip trays can be left under most vehicles due to their low profile design. These are ideal for use over prolonged periods of time, catching any drips that may occur whilst in storage or in the workshop. Model No's DRPL15 and DRPL25, are extra-long in order to cover drips from both engine and gearbox. Model No. Capacity SEA DRPL09 9L SEA DRPL15 15L SEA DRPL25 25L
6.5L Manual Vacuum Oil & Fluid Extractor
•
• Ingenious vacuum device.
• Ideal for other liquids such as water and soluble oil.
• Not to be used with Petrol.
• Supplied with Ø4, Ø6 and Ø8mm suction probes and a Ø10mm x 1m extension tube.
• Probes can be stored in the holder when not in use.
To remove oil from a car engine, simply push the probe down the dipstick hole and pump the handle on the top of the unit.
Sets up a permanent fluid transfer while you do something else.
Avoids searching for drain plug keys and getting under the vehicle.
Ideal for mobile mechanics.
200ml Oil & Brake Fluid Inspection Syringe
• Translucent
• Fluid
6.5L Manual Vacuum Oil & Fluid Extractor
• Ingenious vacuum device.
• Ideal for other liquids such as water and soluble oil.
• Supplied with Ø5.8 and Ø6.7mm sprung steel lined suction probes and a Ø9.8 x 1m extension tube.
• Probes can be stored in the holder when not in use.
• To remove oil from a car engine, simply push the probe down the dipstick hole and pump the handle on the top of the unit.
• Sets up a permanent fluid transfer while you do something else.
• Internal float valve for automatic cut-off when unit has reached maximum capacity.
• Avoids searching for drain plug keys and getting under the vehicle.
• Unit can be tipped 90° for easier emptying.
Model No.
1.5L Oil Inspection Syringe
• Multipurpose syringe with Viton ® seal, ideal for the transfer
3/4"BSP Drum Tap
3/4"BSP Zinc Die-Cast Lockable Drum Tap
5 LUBRICATION
SEA TP69 Model No. SEA S01169
Multipurpose syringe with Viton seal, ideal for the transfer of oils/fluids to and from vehicle components such as brake master cylinders, oil filter housings, power steering reservoirs, differentials and gearboxes.
body allows easy inspection of oils and fluids.
Compatibility: AdBlue ® , Antifreeze, Brake Fluid, Diesel, Oil, Water.
Model No. SEA VS404
of oils/fluids to and from vehicle components such as gearboxes and differentials. • Translucent body allows easy inspection of contents. • Fluid Compatibility: AdBlue ® , Antifreeze, Brake Fluid, Diesel, Oil, Water.
Model No. SEA VS405 • Multipurpose pump perfect for topping up difficult to access points on motor vehicles, lawnmowers, chainsaws and other jobs around the workshop and home. • Capacity: 1L. • Suitable for all engine oils, transmission fluids, brake fluids and general-purpose cleaners. 1L Multipurpose Mini Pump Model No. SEA TP6804 • Polythene constructed drum tap with 3/4"BSP thread. • Quick and easy draining of 205L drums.
Model No. SEA TP126 • Zinc die-cast, push-pull tap. • Locking facility to prevent unauthorised access. • Nitrile seals, suitable for most liquids normally stored in plastic and steel drums. • 3/4"BSP Thread.
Model No. SEA TP128
Model
design
Model No.
Ø200mm
with
& Filter
3pc Fixed Spout Funnel Set
5L Measuring Jug with Flexible Spout
Polyethylene funnel resistant to oil, fuel and some acids.
Removable 2-step flexible spout.
tab with integral hanging eye.
• Ideal for vehicles with smaller diameter unleaded filler necks.
• Fitted with handle and removable brass filter.
•
many fluids
and
Model No.
•
and stable ergonomic design.
Manufactured from hard-wearing
- resistant to oil, fuel and most acids.
flexible spout.
Model No.
6 LUBRICATION
Grip
Funnel
Flexible Spout
Model No. SEA F2F
Polyethylene funnel set suitable for
including detergents, pesticides, diesel
petrol. • Contains Ø75mm, Ø150mm and Ø250mm funnels with hanging tabs. • Not suitable for acetone, gun wash or thinners.
SEA F98
Robust
•
polyethylene
• Removable
SEA J5F
No. SEA F10COMBO • Package includes: F94 - 4pc Economy Fixed Spout Funnel Set F12S - Clip-On Funnel with Spout (x2) OIL1F - Oil Funnel F6 - Ø160mm Flexible Spout Funnel with Filter VFF1 - Ø160mm Flexible Spout Valved Funnel with Filter F99200 - Ø200mm Funnel with Closing Lid 10pc Funnel Combo
SEA OIL1F • Square
and tapered spout fits into most engine filling holes. • Manufactured from durable polypropylene material. • Rectangular aperture (180 x 100 x 145mm) to accommodate up-ended containers. Oil Funnel Model No. SEA F16F • Polyethylene funnel resistant to oil, fuel and some acids. • Removable 2-step flexible spout. • Ideal for vehicles with smaller diameter unleaded filler necks. • Fitted with handle and removable brass filter. Ø160mm Funnel with Flexible Spout & Filter Model No. SEA VFF1 • Heavy-duty polyethylene funnel resistant to oil, fuel and some acids. • Features lockable valve nozzle and integral wire mesh filter to keep contaminants out. • Supplied with detachable flexible hose with end cap. • Fitted with handle for safe and easy pouring. Ø160mm Valved Funnel with Flexible Spout & Filter Model No. SEA VS563 • Transparent measuring jug with removable flexible spout. Wide base for extra stability. 5L Measuring Jug with Flexible Spout Model No. SEA JDL5 • Tough polyethylene jug resistant to oil and most acids. • Removable flexible spout. • Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages. 5L Oil Container with Lid & Flexible Spout Model No. SEA JDL5SET Tough polyethylene jugs resistant to oil and most acids. Removable flexible spout. • Package includes: JDL5 - 5L Oil Container with Black Lid & Flexible Spout. JDL5R - 5L Oil Container with Red Lid & Flexible Spout. JDL5B - 5L Oil Container with Blue Lid & Flexible Spout. JDL5G - 5L Oil Container with Green Lid & Flexible Spout. JDL5L - 5L Oil Container with Lime Lid & Flexible Spout. 5L Oil Containers with Lid & Flexible Spout - Set of 5
Petrol Engine Timing Tool Kit - for GM, Saab, Chevrolet - EcoTec 1.4, 1.6, 1.8, 2.0, 2.2 16v - Belt Drive
Petrol Engine Timing Tool Kit - Alfa Romeo, Fiat, Saab, Chevrolet, GM - 1.4, 1.6, 1.8 16v - Belt Drive Chevrolet, GM
Diesel Engine Timing Tool Kit - for Renault, Nissan 1.5dCi, Suzuki DDiS, Dacia dCi - Belt Drive
Model No. SEA VS1700
Designed to fit between camshaft sprockets to maintain camshaft timing position. Essential tools for timing belt replacement applications. Supplied as a pair.
Diesel Engine Timing Tool Kit - for VAG 1.4D, 1.6D, 2.0D Common Rail - Belt Drive
• Comprises camshaft setting tool and belt tensioner locking pin.
Suitable for engine timing applications on all 1.4, 1.6 and 1.8 Twinport engines with belt drive.
Model No. SEA VSE131
Diesel Engine Timing Tool Kit - VAG, Ford, Dodge, Mitsubishi 1.2D, 1.6D, 1.9D, 2.0D TDi Common Rail - Belt Drive
• Essential Tools for timing belt replacement on Renault/Nissan 1.5D dCi diesels.
• Covers engine codes K9K. These engines are also fitted in Suzuki and Dacia models.
Model No. SEA VSE1901A
Petrol Engine Timing Tool Kit - for Alfa Romeo, Fiat, GM, Saab, Chevrolet - 1.4, 1.6,
Twinport - Belt Drive
• Covers the new generation 3 and 4-cylinder common rail diesel engines.
• Includes the tools required for setting the camshaft drive gears within the cylinder head.
• For VAG 1.4D, 1.9D, 2.0D TDi PD (Pumpe Duse) and 1.2D, 1.6D, 1.9D, 2.0D CR (Common Rail) engines with Mechanical (Friction Dampened) Belt Tensioner.
Model No. SEA VSE2090
• Kit includes crankshaft locking tools (oval and round gears), plus camshaft and tensioner locking pins.
Model No. SEA VSE2358
Comprises camshaft setting tools and belt tensioner locking pins.
Suitable for timing applications on all
1.6 and
Twinport petrol
with belt
Model No.
VSE5006
7 VEHICLE SERVICE
SEA
•
•
1.4,
1.8
engines
drive.
1.8
Model No. SEA VSE5094 Suitable for 1.0 and 1.2 Citroen, Peugeot, Toyota and GM belt in oil engines. • Fast and accurate way to check for belt degradation. Petrol Engine Timing Belt Checking Gauge for PSA 1.0, 1.2 - Belt Drive Model No. SEA VSE5515 Covers the complete range of Ford Duratec engines 1.25, 1.6, 1.8, 2.0, 2.3 16v in both belt and chain drive variants. Petrol Engine Timing Tool Kit - for Ford, Mazda, Volvo 1.25, 1.6, 1.8, 2.0, 2.3 16v Duratec - Belt/Chain Drive Model No. SEA VSE5860 • Crankshaft pulley alignment tool for Ford B-Max 1.6 EcoBoost engine. • Ensures the crankshaft pulley is correctly aligned with the timing belt cover. Crankshaft Pulley Alignment Tool - for Ford 1.6 EcoBoost
Petrol
Petrol Engine
Auxiliary Stretch Belt
Camshaft Positioning Tool
8 VEHICLE SERVICE Model No. SEA VSE5042A • Suitable for a wide range of belt or chain driven petrol and diesel engines. • Contains a camshaft sprocket puller and flywheel locking tools. • Supplied in a storage case with instructions and a warning tag. Diesel/Petrol Engine Timing Tool Combination Kit - for Ford, PSA - Belt/Chain Drive Model No. SEA VSE5950 • Timing kit suitable for 1.2, 1.4TFSi and 1.4, 1.6FSi engines. • Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking. • Supplied in storage case.
Engine Timing Tool Kit - VAG 1.2, 1.4TFSi, 1.4, 1.6FSi - Chain Drive Model No. SEA VSE5909 • Suitable for belt tensioning 1.8 and 1.8 Turbo twin camshaft engines. • These belt drive engines also have a chain connecting the two camshafts. • Includes a belt tensioner bolt, belt tensioner pin and chain tensioner retainer.
Belt Replacement & Chain in Head Service Set VAG 1.8, 1.8T - Belt Drive Model No. SEA VS787 • Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering. • Prevents damage to the pulley and prolongs the life of the belt. • Two tools included, one for installation and one for removal. Fits most crankshaft pulleys. Supplied in storage case.
Removal/Installation Tool Model No. SEA CV002 • Designed to rotate crankshaft on DAF commercial vehicles via flywheel ring gear. 1/2"Sq Drive Crankshaft Rotator - DAF Model No. SEA CV011 • Chrome Vanadium steel with a phosphate finish. • Designed to rotate the crankshaft on Scania commercial vehicles. Model No. SEA VS173 Adjustable legs allow insertion of pegs into holes in camshaft pulleys. Suitable for coarse and fine positioning of camshaft for timing on a variety of engines including Ford Zeta and Zetec engines.
Crankshaft Rotator - Scania 1/2"Sq Drive
1/2"Sq
also be used with a
Extra-wide Nylon
for
to Ø300mm.
with
3/8" & 1/2"Sq Drive Oil Filter Claw Wrench Ø63-103mm Capacity
3/8" & 1/2"Sq Drive Oil Filter Claw Wrench Ø65-110mm Capacity
steel
1/2"Sq
suitable for use with a 21mm spanner.
grip filter tighter as more torque
Model
1/2"Sq Drive Oil Filter Chain Wrench Ø135mm Capacity
•
for
filter
Model
Filter
Band type filter wrench.
with
of
Oil Filter Locking Plier 45-130mm
serrated
be
Model
Ø150mm Strap Wrench
other
strap
to
Model
soft
Oil Filter Band Wrench
•
Model
Band type filter wrench.
heavy-duty cast
Oil Filter Locking Plier Angled 45-130mm
9 VEHICLE SERVICE Model No. SEA AK6403 3/8" and
drive. • May
21mm(13/16") spanner. •
webbing strap suitable
filters up
• Use
ratchet wrench. 3/8" & 1/2"Sq Drive Oil Filter Strap Wrench Model No. SEA AK6404 • Satin finished, drop-forged steel body with hanging hole. • Reinforced, rubberised strap. Ø60-140mm Oil Filter Strap Wrench
No. SEA AK6406 • Suitable for removing and installing oil filters as well as many other applications. • Adjustable strap fits filters up to Ø120mm. • Features soft grip handle for added comfort. Ø120mm Strap Wrench
No. SEA AK6407 • Suitable for removing and installing oil filters as well as many
applications. Adjustable
fits filters up
Ø150mm. Features
grip handle for added comfort.
Model No. SEA AK641 • Satin finished carbon steel body with 1/2"Sq drive for use with ratchet wrench. • May also be used with a 20mm spanner. • Heavy-duty chain. • Drive: 1/2"Sq.
No. SEA AK642 • Satin finished carbon steel construction with 3/8" and
drive. • Also
• Claws
is applied.
Model No. SEA AK6422 • Capacity 45 - 130mm. • Used for removing canister style oil filters. • The
jaws can
locked into place offering a strong grip even on oily filters. • Drop Forged Alloy Jaws. • Jaws manufactured from chrome vanadium with the body manufactured from molybdenum.
Model No. SEA AK6423
Capacity 45 - 130mm. • Used for removing canister style oil filters. • The serrated jaws can be locked into place offering a strong grip even on oily filters. • Angled jaws for hard to access oil filters. • Drop Forged Alloy Jaws. • Jaws manufactured from chrome vanadium with the body manufactured from molybdenum.
No. SEA AK643
Satin chrome finish
construction with 1/2" and 3/8"Sq drives. • Also suitable
use with a 21mm spanner. • Claws grip
tighter as more torque is applied.
No. SEA AK644
Steel strap with heavy-duty cast body and control knob. • Removes filters
minimal risk
damage. Ø65-105mm Oil
Band Wrench Model No. SEA AK645
Steel strap with
body and control knob. • Removes filters with minimal risk of damage. Ø105-155mm
Model
type filter
10 VEHICLE SERVICE Model No. SEA VS7006 • Extensive set designed for a wide range of vehicles. • Cap type filter wrenches, made from 7 and 16 gauge steel, will withstand up to 115Nm(85lb.ft) of torque. • Designed to grip like sockets, thereby minimising the possibility of crushed filters. • Adaptor allows use with 3/8" or 1/2"Sq drive wrenches. • Adjustable oil filter wrench Ø65-120mm. • Supplied in storage case. 30pc Oil Filter Cap Wrench Set
No. SEA VS7200 • Suitable for removing the cap from the oil filter housing on Ford, Citroen, Peugeot 2.0D/2.2D HDi/TDCi diesel engines (DW10C, DW12C) and Jaguar XF 2.2D from 2012 onwards. • Allows access to the hard-to-reach 27mm hex located on the filter cap. • Use with 1/2"Sq drive wrench. Oil Filter Cap Remover - Ford/ Jaguar/Citroen/Peugeot 2.0D/2.2D Diesel Model No. SEA SX226 • Cap
wrench prevents damage to filter housing. • Will withstand up to 115Nm(85lb.ft) of torque. • Low profile design suitable for use in confined areas. • Applications: Purlux grove filters fitted to Audi, BMW, Citroen, Fiat, Ford, Lancia, Mazda, Mercedes, Nissan, Peugeot, Porsche, Renault, Suzuki, Toyota, Vauxhall/Opel, VW. Ø74mm Oil Filter Cap Wrench 14 Flutes Ø76mm Oil Filter Cap Wrench 14 Flutes BMW, Champion, Mercedes, Porsche, VAG Model No. SEA VS7006.V2-06 • Suitable for BMW, Mercedes, Porsche, VAG. • Cap type filter wrench prevents damage to filter housing. • Will withstand up to 115Nm (85lb.ft) of torque. • Low profile design suitable for use in confined areas. Model No. SEA VS7111 Cap type oil filter wrench. Crowned top provides extra leverage points for removing stubborn oil filter housing caps. • Aluminium alloy material minimizes risk of damage to filter housing. Ø64.5mm Oil Filter Cap Wrench 14 Flutes - Toyota Model No. SEA VS7112 • Cap type oil filter wrench. • Crowned top provides extra leverage points for removing stubborn oil filter housing caps. • Aluminium alloy material minimizes risk of damage to filter housing. Ø64.5mm Oil Filter Cap Wrench 14 Flutes - Lexus/Toyota Model No. SEA VS615 • Ideal for repairing sump, gearbox and differential drain plug threads. • Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer. • Tap Size: M15 x 1.5mm. Oil Drain Plug Thread Repair Set - M15 Model No. SEA VS660 Superb for repairing sump, gearbox and differential drain plug threads. • Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer (supplied). • Set is suitable for the most popular threads used on Drain Plug Thread Repair Set Model No. SEA VS661 • Comprehensive thread repair kit ideal for repairing sump, gearbox and differential drain plug threads. • Used to tap the damaged thread slightly over size, then fit a new drain plug and washer (supplied). • Set is suitable for the most popular threads used on cars and light commercial vehicles. • Sizes: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5mm. Oil Drain Plug Master Thread Repair Set Model No. Replacement Parts SEA VS660.03 Tap M15 SEA VS660.05 Sump Plug M20 SEA VS660.06 Sump Plug M17 SEA VS660.07 Sump Plug M15 SEA VS660.08 Sump Plug M13 SEA VS660.11 Spacer M15 Replacement Parts for Model No. VS660 Model No. VS660.03 Model No. VS660.05 Model No. VS660.06 Model No. VS660.07 Model No. VS660.08 Model No. VS660.11
Model
11 VEHICLE SERVICE Model No. SEA AK658 • Double end carbon steel keys with chemically blackened finish. • Suitable for sump plugs on engine, gearbox and back axle. • Use with 19mm socket on ratchet driver. • Supplied in storage case. 6pc Double End Oil Drain Plug Key Set Model No. SEA AK6586 • Comprehensive set of Chrome Vanadium steel keys with sliding T-bar. • Suitable for sump plugs on engine, gearbox and back axle. • Contents: Square Male; 7, 8, 10, 11, 12, 13, 14mm, 5/16", 3/8", Square Female; 10mm, Hex; 8, 9, 10, 12, 13, 14, 17mm, Triangle; 10mm (PSA), Security Spline; M16 (VAG), TRX-Star*; T45 (Vauxhall/Opel), 3/8"Sq Drive Sliding T-Bar. 21pc 3/8"Sq Drive Oil Drain Plug Key Set
No. SEA VS650 • The right size drain plug key always in your hand. • Eight popular sizes covered in one tool. • Sizes: Hex; 10, 12, 14, 17mm, Square; 3/8", 1/2", 8, 10mm. • Suitable for drain plugs on engine, gearbox and back axle. 8-in-1 Oil Drain Plug Wrench Model No. SEA S0516 Imperial graduated 12 blade feeler gauge. Sizes: 0.008" to 0.026" (0.203 to 0.660mm). Dual marked in Imperial and Metric. • Blade dimensions: 95 x 13mm (45º-25mm offset). 12 Blade Offset Feeler Gauge Dual Marked Model No. SEA S0517 Metric graduated 13 blade feeler gauge. Sizes: 0.05 to 1mm. • Blade dimensions 95 x 10mm. 13 Blade Feeler Gauge Model No. SEA S0518 • Imperial graduated 13 blade feeler gauge. • Sizes: 0.002" to 0.040". • Blade dimensions 100 x 10mm. 13 Blade Feeler Gauge - Imperial Model No. SEA VS511 • Metric graduated, 15 blade, feeler gauge. • Sizes: 0.06 to 0.70mm. • Blade dimensions: 75 x 13mm. 15 Blade Feeler Gauge Model No. SEA VS530 • Designed to be used with any 1/2"Sq drive breaker bar. • Tough composite dial and rotating index line allow operator to accurately tighten fixing to manufacturer’s exact specification. • Supplied with fully adjustable reaction arm. • Essential measuring tool for the busy workshop. 1/2"Sq Drive Angular Torque Gauge Model No. SEA S0515 • Imperial graduated 26 blade feeler gauge. • Sizes: 0.005" to 0.030" (0.127 to 0.762mm). • Dual marked in Imperial and Metric. • Blade dimensions: 100 x 12.7mm (45º-25mm offset). 26 Blade Offset Feeler Gauge Dual Marked Model No. SEA S0514 Imperial graduated 32 blade feeler gauge. Sizes: 0.0015" to 0.035" (0.038 to 0.889mm). Dual marked in Imperial and Metric. Includes 0.010" brass blade. Blade dimensions 90 x 13mm. 32 Blade Feeler Gauge Dual Marked
20pc
& Decarbonising
Fuel Feed Pipe Pliers
Diesel & Petrol Fuel Pump Priming Tool
Model
Fuel Filter
Vacuum & Fuel Pump Pressure Test Gauge Set
Fuel Tank Sender
10pc Diesel Injector Seat Cleaner Set
12 VEHICLE SERVICE Model No. SEA VS1800 • Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. • Supplied in sizes from Ø9-19mm in brass, nylon and steel. • Features quick release extension bar for increased reach.
Cleaning
Brush Set Model No. SEA VSE952 • Ø80mm Gauge with protective rubber bumper and hanging hook. • Checks for leaks in fuel line, vacuum chokes and heating. • Includes long flexible hose and adaptors. • Supplied in storage case.
Model No. SEA VS2055 • Set of seven diesel injector seat cleaners, ream, centring pilot and T-handle. • Used to clean/decarbonise injector seats when changing injectors. • Helps to avoid blow-back due to poorly seated injectors. • Suitable for a wide range of vehicles.
Model No. SEA AK6900 Fuel pipe socket, 3/8" Drive 17mm multi-point end. Suitable for removing and installing high pressure fuel pipes. • Manufactured from Chrome Vanadium. 17mm Multipoint 3/8" Drive Fuel Pipe Socket Model No. SEA VS6428 For removing and refitting fuel filter bowl when replacing the fuel cartridge.
Key - Ford Transit Model No. SEA VS6423 • For removing and refitting fuel tank sender mounting rings.
Spanner 3-Leg Ø70-165mm 24mm Hex Drive Model No. SEA VS0458 • Aluminium alloy construction with profiled head. • Suitable for releasing connections on in-line fuel line filters. • Fitted with long handle for restricted access. Fuel Feed Pipe Pliers Model No. SEA VS0453 Suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters. • Designed to compress the quick connect lugs for easy removal without damaging the connector.
Model No. SEA VSE055 • Required for priming injection pump. • Use after diesel filter change, drainage of fuel tank or any other disturbance of the fuel system. • Supplied with two fuel pipe clips. • Suitable for 9mm bore hose.
No. SEA AK4125 Checks condition of AdBlue ® • Condition is indicated by the number of discs floating in the sample. • Easy-to-read test procedure on robust plastic body. AdBlue® Tester - Disc Type
2pc Air
• Die-cast tools suitable for press-type quick disconnection joints found on Chrysler, Ford and Vauxhall/Opel vehicles.
• Swivel action allows quick selection of correct sized tool.
Model No.
VS045
16mm 3/8"Sq Drive Spark Plug Socket - Magnetic
4pc Air Conditioning Spring Lock Coupling Tool Set
22mm 3/8"Sq Drive Oxygen Sensor Socket
Oxygen Sensor Port Thread
Magnetic spark plug socket. Forged Chrome Vanadium steel, hardened, tempered and chrome plated.
Model No. SEA AK654
Spring type coupling connectors for air conditioning lines.
Locking action prevents spray when disconnecting lines.
Suitable for most Chrysler, Ford and Vauxhall/Opel vehicles.
Model No.
VS0454
14mm 3/8"Sq Drive 12-Point Spark Plug Socket with Magnetic Retainer
• 22mm Hardened and tempered Chrome Vanadium steel socket with blackened finish.
Suitable for heated and unheated oxygen sensors.
Cut-out section allows socket to pass over wiring.
Model No.
SX022
14mm 3/8"Sq Drive 12-Point Spark Plug Socket with Universal Joint
Suitable for cleaning and repairing damaged threads on the exhaust oxygen sensor ports.
Thread Size: M18 x 1.5mm. Use with 21mm socket.
Model No.
VS528
300mm Spark Plug Pliers
Designed for use where plug clearance is tight.
Standard depth, thin wall, 12-point 3/8"Sq drive 14mm socket with magnetic insert to retain spark plug. Magnetic insert to retain spark plug. Application: BMW.
Model No.
AK6568
• Designed for use where plug clearance is tight.
• Standard depth, thin wall, 12-point 3/8"Sq drive 14mm socket with magnetic insert to retain spark plug.
• Features a universal joint for ease of access.
• Application: BMW.
Drive Oxygen
Model No. SEA AK6569
• Suitable for removal of spark plug boot on deep-seated engine applications.
• Composite handles provide insulation from HT shock and give added comfort and control.
Model No. SEA VS867
Diesel & Petrol Compression, Leakage
13 VEHICLE SERVICE
SEA
Conditioning & Fuel Disconnection Tool Set
SEA
SEA
SEA
Chaser
SEA
Model No. SEA CT955 • Compression tester fitted with Ø63mm gauge reading up to 300psi(20kg/cm²). • Kit includes 130mm straight and angled push-on connectors, 300mm flexible extension with 10, 12, 14 and 18mm deep thread adaptors. • Supplied in storage case. 8pc Petrol Engine Compression Test Kit Model No. SEA SX032 • Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. • Windows and slots enable sockets to be fitted over wiring harness. 7pc 3/8" & 1/2"Sq
Sensor Socket Set Model No. SEA VSE3156 • A comprehensive kit for testing the compression and leakage on both diesel and petrol vehicles. Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors. • Includes TDC finder, ideal for use when the engine has no crankshaft timing marks. • Supplied in storage case. • See Sealey website for complete vehicle applications.
& TDC Kit
Infrared Laser Digital Thermometer 12:1
Mini Digital Thermometer
600mm Engine DipstickAudi
50-160mm Dial Bore Gauge
75mm Piston Ring
Ø60-125mm
1.5mm
• Creates a stronger internal thread in soft metals.
• Ideal for repairing damaged or stripped internal threads.
• Protects tapped threads against wear and damage.
Includes drill bits, thread taps, stainless steel thread
insert installation and
breaking tools.
Model No. SEA TRMK
Precision mechanism with Ø55mm dial and locking rotating bezel, offering an accurate method of measuring a bore or detecting a taper or ovality.
Measuring Range: 50-160mm. Will indicate the deviation from set size by up to 3mm with an accuracy of 0.01mm.
• Probe body, dial indicator, anvils and spacer rings are also included.
• Supplied in wooden storage case.
Model No.
SEA DBG5010
Ø40-100mm Piston Ring Installation Pliers
• Quality construction with sprung steel wraps and ratchet action tension mechanism.
• Supplied with steel key.
Model No. SEA VS155
Ø50-175mm Triple Leg Cylinder Hone 75mm Medium Stones
Replacement Stone Sets for
Packs of 3
• Designed for the installation and removal of Ø40-100mm piston rings.
• Jaws are shaped to protect the piston ring from damage.
• Vinyl gripped handles with spring-return mechanism.
Model No. SEA VS1642
• For removal of heat glaze and carbon deposits on cylinder walls.
Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm. Range collar adjusts arm travel between Ø50mm and Ø100mm or Ø100mm and Ø175mm. Adjustable spring tension gives finish control.
Model No. SEA VS162
Thread Repair
15 VEHICLE SERVICE
Compressor
VS162
common sizes of
(M5
M6 x 1mm, M8
M10 x
and
•
inserts,
lug
Thread Repair Master Kit Adaptors Model No. Size SEA AK506.V2-03 3/16" SEA AK506.V2-04 1/4" Model No. Grade SEA VS1621 Medium SEA VS1622 Coarse SEA VS1623 Fine Model No. SEA VS1623 Thread Inserts Model No. Size SEA TRM5R M5 x 0.8mm SEA TRM6R M6 x 1mm SEA TRM8R M8 x 1.25mm SEA TRM9R M9 x 1.25mm SEA TRM10R M10 x 1.5mm SEA TRM12R M12 x 1.75mm SEA TRM14R M14 x 1.25mm Model No. SEA TRM6R • Creates a stronger internal thread in soft metals. • Ideal for repairing damaged or stripped internal threads. • Protects tapped threads against wear and damage. Set includes drill bit, thread tap, insert installation and lug breaking tool. Each size supplied with three different lengths of thread insert.
Kits Model No. Size SEA TRM5 M5 x 0.8mm SEA TRM6 M6 x 1mm SEA TRM8 M8 x 1.25mm SEA TRM9 M9 x 1.25mm SEA TRM10 M10 x 1.5mm SEA TRM12 M12 x 1.75mm SEA TRM14 M14 x 1.25mm ModelNo.SEATRM6 Thread Inserts Model No. Size SEA VS311.01 M8 x 1mm SEA VS311.02 M10 x 1mm SEA VS311.03 M10 x 1.25mm SEA VS311.04 M12 x 1.25mm Model No. SEA VS311.01 Model No. SEA VS311.03 Model No. SEA AK506.V2-03 Model No. SEA AK506.V2-04
circuitry
•
electrical
check using
and
on
of
Model
of
Brake Fluid Tester - Boil Test
Turbo System Leakage Tester
by
• Double end tool.
• Enables retraction
Model
• The approved method of testing the water content of brake fluid.
• Just 3% of moisture can lower the brake fluid boiling point by over 100°C.
• The best way to detect this small water content is to measure the boiling point of the fluid.
• The unit incorporates a heater element, LCD display and a power lead for use on 12V DC power supplies.
• Works on DOT 3, 4, 5 and 5.1 specification fluids.
Supplied in storage case with full operating instructions.
Model
4pc Brake Piston Wind-Back Tool Kit
• Designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system.
• Kit supplied with four pairs of stepped adaptors to fit most sizes of hose.
• Adaptor Sizes: 35-90mm.
• Features a pressure gauge, shut-off valve and pressure release valve.
• Can also be used on cooling system hoses.
• Supplied in storage case.
Model No.
Model
Brake Pipe Flaring
Model
16 VEHICLE SERVICE
No. SEA VS0274
Integrated
checks moisture content
fluid by measuring the
resistance and comparing it with acceptable limits. • Easy calibration
water. • Five LED read-out. • Just switch on
insert probe for immediate result. • Works
all grades
brake fluid. • Powered
1 x AAA battery (supplied). Pocket Brake Fluid Tester
No. SEA VS0275
•
SEA VS2030
No. SEA VS024
of the piston on rear brake calipers allowing new brake pads to be installed.
Brake
Piston Wind-Back Tool with Double Adaptor
No. SEA VS0240 Kit consists of adaptors with thrust bolt assembly and reaction plate suitable for push-back and wind-back brake pistons. Helps prevent damage to pistons and seals.
No. SEA VS0282 • Suitable for push-back and wind-back brake pistons. • Includes left and right-handed thrust bolt assemblies, reaction plate, hex bits and adaptors and includes the 3-pin VAG adaptor. • Supplied in storage case.
21pc
Brake Piston Wind-Back Tool Kit Model No. SEA VS02821 Adaptor enables retraction of the piston on rear brake calipers when used in conjunction with a traditional wind-back tool with a 2-pin adaptor mounting. Applications: Model No's. VS0211, VS0240, VS0282, VS0285, VS0286, VS0287. • 3-Pin design suitable for VAG vehicles. Rear Brake Piston Wind-Back Adaptor - VAG Model No. SEA AK5063 • Single and double flares on copper tubing. • Integral flare press. • Suitable for on-vehicle use.
Tool Kit Model No. SEA PFT12 • Produces accurate automotive SAE flares on 3/16" pipes. • Lightweight body makes it ideal for splicing in replacement sections of brake pipe on-vehicle. • Suitable for copper, cupro-nickel and steel pipes. On-Vehicle Micro Brake Pipe Flaring Tool 3/16" SAE
Vacuum Tester & Brake Bleeding Kit
engine
includes
Model
Vacuum & Pressure Test/Bleeding Kit
Automatic
Model No.
2.5L Brake & Clutch Bleeding System
One-person brake and clutch bleeding the professional way. Bleeding requires no external power sourcesimply fill and pump. Reservoir holds 2.5L of hydraulic fluid - flush the entire system with one fill, without the risk of running the reservoir dry.
• Pressure range makes unit suitable for use with ABS systems.
• Fitted with Ø45mm cap with 90° angled connector which is suitable for most European models.
• For other applications, order optional Brake Reservoir Cap 45mm Straight Connector - Model No. VS820SA, Universal AdaptorModel No. VS820UA and Bleeder Cap SetModel No. VS0204B.
of
• Professional vacuum/pressure diagnostic tool helps identify a variety of faults on vehicle systems including fuel, ignition, transmission, emission and air conditioning/ heating. Kit also includes reservoirs, hoses and adaptors for bleeding brake and clutch systems. Features simple push/pull function for choice of pressure or vacuum testing. Large rubber easy-to-read gauge.
Model No.
VS403
Brake & Clutch Bleeding System Universal Adaptor
Fast, easy and effective bleeding of brakes and clutch using air from tyre.
Innovative design incorporates valve for control of air pressure, extra-long air hose for use with larger vehicles and magnetic reservoir base to prevent accidental spillage.
Suitable for use with ABS systems.
Supplied with a range of common adaptors.
Model
Vacuum Tester & Brake Bleeding Kit
• Universal reservoir cap for Model No's VS820, VS821 & VS0204A Brake & Clutch Bleeding System.
• Supplied with quick connect.
VS820UA
• Multifunction diagnostic tool used to test a variety of essential engine and associated functions including fuel, ignition, transmission and emissions.
• Kit also includes reservoir, hoses and adaptors for bleeding brake and clutch systems on cars, commercials and motorcycles.
• Brass-bodied vacuum pump features large, easy-to-read vacuum gauge displayed in both inches and millimetres of mercury.
Model No. SEA VS4021
Ø45mm Brake Reservoir - Straight Connector
• For use in conjunction with Model No's VS820, VS821 & VS0204A Brake & Clutch Bleeding System.
• Brake reservoir cap Ø45mm with straight connector.
18 VEHICLE SERVICE Model No. SEA VS0462R • Thread inserts for Model No. VS0462 Brake Caliper Thread Repair Kit. M9 x 1.25mm Thread Insert for VS0462 - Pack of 10
No. SEA VS020 • The simple way to bleed hydraulic brakes. • One-person operation. • No special reservoir caps required. • Uses regular 90psi air supply. • Supplied with complete operating instructions. 1L Pneumatic Vacuum Brake Bleeder
No. SEA VS0205
•
Brake & Clutch Bleeder
SEA VS402 • Multifunction diagnostic tool used to test a variety
essential
and associated functions. • Also
reservoir, hoses and adaptors for bleeding brake and clutch systems. • Brass-bodied vacuum pump with easy-to-read vacuum gauge. • Contents: Vacuum Pump, Fluid Container, Transfer Cap, Vacuum Hoses; 560mm (x2), 80mm (x4), Assorted Vacuum Hose Fittings (x5), Bleed Nipple Adaptors (x3).
SEA
Model No. SEA VS820
Model No. SEA VS820SA
Model No. SEA
4pc
4-Way Wheel Brace
17mm 1/2"Sq Drive Alloy Wheel
Socket
Model
1/2"Sq Drive 4-Way Wheel Brace
Model
1/2"Sq Drive Alloy Wheel Impact
Model
1/2"Sq Drive Extra-Long 4-Way Wheel Brace
Model
3pc 1/2"Sq Drive Alloy Wheel Impact
Set
19 VEHICLE SERVICE
No. SEA VS0301 Light and compact steel alloy construction for ease of use where space is limited. Rounded jaw edges prevent damage to internal hose reinforcements. Suitable for use on fuel, vacuum and brake hoses.
Brake & Fuel Hose Pinch Tool Set
No. SEA VS034 • Completely or partially seals flexible brake, fuel and vacuum lines. • Smooth rounded jaw edges prevent damage to internal hose reinforcement. • Quick and simple-to-use. • All steel construction with sliding lock collar. Brake & Fuel Hose Pinch Tool - Spring Type Model No. SEA SX03017 • Chrome Molybdenum socket, hardened, tempered and anodised for corrosion resistance. • Suitable for use with impact tools. • 6-Point socket is sleeved to prevent damage to alloy wheels and nuts. • Colour-coded for easy size selection.
Impact
Model No. SEA SX031 • Anodized Chrome Molybdenum 1/2"Sq drive sockets. • Suitable for use with impact tools. • Features nylon sleeve and insert to prevent damage to alloy wheels. • Colour-coded sockets for easier size selection. • Comprises standard 17, 19, 21mm sockets.
Socket
Model No. SEA SX0417 • Star profile wheel nut socket which is now used on some Mercedes vehicles. • Manufactured from Chrome Molybdenum with protective sleeve. • Size: 17mm.
Socket - Star Profile for Mercedes Model No. SEA AK2090 • Forged construction with hot forged sockets and baked finish. • Socket Sizes: 17, 19, 21, 22mm.
No. SEA AK2093 • Forged construction with polished mirror finish. • Features three popular size wheel nut sockets and 1/2"Sq drive adaptor for standard sockets. • Socket Sizes: 17, 19, 21mm.
No. SEA AK2096 • Longer than most other wheel braces on the market, allowing extra force to be applied. • Manufactured from carbon steel with chrome finish. • Features three popular sizes of wheel nut sockets, and 1/2"Sq drive adaptor for standard sockets. • Socket Sizes: 17, 19, 21mm.
• Smooth rounded jaw edges prevent damage to internal hose reinforcement. • Quick and simple, one-handed use. • Made from durable glass reinforced nylon. Composite Hose Pinch Tools Model No. Size Applications SEA VS030 Small Brake/Fuel Hoses SEA VS031 Medium Heater Hoses ModelNo.SEAVS030
2pc 4-in-1 Impact Socket Set
Emergency Breakout Tool With Tyre Tread Depth Gauge
Tyre Tread Depth Gauge - DVSA Approved
• 4-in-1 Double ended impact socket, 17/19/21/22mm with 75mm 1/2"Sq Drive impact extension bar.
• One socket can be used to replace four different sockets.
• Can safely be used with, impact wrench, air ratchet, breaker bar, or torque wrench.
Constructed from Chrome Vanadium Steel (CRV) for maximum strength, ideal for the professional.
Model No. SEA SX1821
Tyre Pressure Gauge with Pocket-Clip 6-50psi
Trigger action and hardened tip shatters glass with minimum effort.
Designed for 5mm automotive tempered glass.
Recessed seat belt cutter provides fast and effective method of escape.
• Tyre tread depth gauge offers a quick and easy check of tread level.
Tyre Valve Installer
Model No. SEA TST19
Tyre Valve Core Tool
• Chromed steel body with pocket-clip.
• DVSA Approved depth scale includes 1.6mm graduation for minimum tyre tread requirements.
• Scale from 0-26mm in 1mm graduations.
Tyre Tread Depth Gauge Pocket Type
Model No.
• Chromed steel body with pocket-clip.
• Scale from 0-25mm in 1mm(0-1" in 1/32") graduations.
Model No. SEA TST/DGE
Alloy Rim Tyre Valve Installer
• Pencil type gauge with chromed steel body and pocket-clip.
• Scale from 6-50psi in 1psi graduations.
• Dust cap includes valve core removal tool.
Model No. SEA TSTPG9
• Simplifies installation of tyre valves in tubeless wheels.
• Pulls tyre valve assembly through rim.
• Shank is notched to accommodate various rim styles.
Strong 270mm long handle with corrosion resistant plating.
Model No. SEA TST/TVI
Temporary Puncture Repair & Service Kit
• Ideal for repairing punctures on tubed and tubeless tyres
and off-road vehicles.
• Can also be used as a temporary/emergency fix
• Repair strips allow
from the wheel.
Also includes
Not to be
Model No.
• Used for removal and installation of the core from a wheel valve.
Features easy grip handle and ideal for the busy workshop.
Suitable for motorcycles, cars and commercial vehicles.
Model No. SEA TST/VCT
• Simplifies installation of tyre valves in tubeless wheels.
• Pulls tyre valve assembly through rim.
• Shank is notched to accommodate various rim styles. Manufactured from resilient nylon to minimize damage and marking to alloy wheels.
Features a valve core removal tool mounted in the base of the handle. Length: 270mm.
Model No. SEA TST04
Tyre Valve Removal/Installation Tool
Time-saving tool allows you to remove
valves
on steel wheels
especially
Valve
Digital Tyre Tread Depth Gauge
20 VEHICLE SERVICE
SEA TST09
fitted to agricultural
on cars and commercial vehicles.
tubeless tyres to be repaired without removing the tyre
•
parts and tools for general tyre servicing. •
used as a permanent repair for road vehicles. • Contents: Temporary Tubeless Repair; Rasp, Insertion Needle, Repair Strips (x10), Tube Repair; Patches - Round Ø30mm (x3), Round Ø57mm (x3), Abrasive Scraper, Glue, Service Items; Valve Caps (x4), Valve Cores (x4), Tools; Tyre Pressure Gauge (10-50psi), Tyre Valve Service Tool.
Model No. SEA TSTVRK
•
and install leaking tyre
without having to remove the tyre. • Works
and
good for valves on motorcycle or agricultural wheels. • Contents: Cone, Push/Pull Driver,
Hook Tool, Tyre Valve. • Not suitable for high pressure valves.
• Tough composite sliding gauge. • 10mm High figures in LCD display. • Metric and Imperial calibration with conversion between the two. • Range: 0-25mm(0-1"). • Zero setting control allows for comparative measurement.
Tyre Pressure Gauge with Clip-On Connector
• Robust gauge with protective rubber bumper.
• Supplied with clip-on connector.
• Scale: 0-7bar/0-100psi.
Digital Tyre Pressure Gauge with Push-On Connector
Model No. SEA TST/PG6
Digital Tyre Pressure Gauge with Swivel Head & Quick Release
Die-cast body and digital type gauge with rubber protector.
Displayed in psi, bar, kpa and kg/cm².
Supplied with a protective soft rubber cover.
Pressure release valve.
Auto-power-off function.
• Rigid type swivel head with quick release.
• Range: 0-150psi.
• Requires 2 x AAA batteries (supplied).
Digital Tyre Pressure Gauge with Twin Push-On Connector
Model No. SEA TST001
Digital Tyre Pressure & Tread Depth Gauge
Die-cast body and digital type gauge with rubber protector.
Displayed in psi, bar, kpa and kg/cm².
Supplied with a protective soft rubber cover. Pressure release valve.
Auto-power-off function.
• Swivel head with hose and push-on connector.
• Range: 0-150psi.
• Requires 2 x AAA batteries (supplied).
Model No. SEA TST002
• Die-cast body and digital type gauge with rubber protector.
• Displayed in psi, bar, kpa and kg/cm².
• Pressure release valve.
• Auto-power-off function.
Swivel head with hose and push-on chuck. Range: 0-150psi.
Requires 2 x AAA batteries (supplied).
Model No. SEA TST003
CVJ Boot/Hose Clip Tool with Cutter
Tyre pressure gauge with integral tread depth gauge and work light.
Push-button operation with backlit LED display for tyre pressure.
• Read-out available in bar, psi, kg/cm² or kPa.
• Integral tread depth gauge reads up to 20mm.
• Auto-power-off.
Model No. SEA TSTPG11
•
Formed
Suitable
cooling system and vacuum hoses.
Model
21 VEHICLE SERVICE
No. SEA VS1633
steel arms with insulated vinyl handles.
for ear-type hose clips found on fuel,
• Also used for securing CVJ boot clips. Ear-Type CVJ Boot/Hose Clip Pliers Model No. SEA VS1636 • Quality made tool designed to aid fast tensioning and securing of CVJ boot banding material. • Simply insert banding, tension using winding mechanism, and then pull over lever to cut the band to length. • Fitted with large and comfortable handle.
Model No. SEA VS1639
Steel jaws with PVC coated handles for added comfort. • Each handle features a 1/2"Sq drive for use with a torque wrench and breaker bar where vehicle maker demands specific band tensions. • Suitable for all ear-type CVJ boot clips. Extra-Heavy-Duty Ear-Type Clip Pliers
Model No. SEA BSL103
Steering Rack Knuckle
2pc Lower Ball Joint Socket
Strut Nut Socket - Audi, VW
22 VEHICLE SERVICE Model No. SEA TST13 • Suitable for marking tyre damage or areas for repair. • Will work on practically any surface including rubber, metal and paint. • Paper protective wrapper can be peeled back as crayon wears. • Length: 100mm. White Tyre Marking Crayon - Pack of 6 Model No. SEA VSTL500 Forged Chrome Vanadium steel. Hook and taper ends. Length: 500mm. 500mm Tyre Lever Model No. SEA VSTL940 Carbon steel tyre lever with hook ends. • Suitable for use on commercial vehicle tyres. Model No. SEA VS4000 • Suitable for the fast and easy removal of the steering knuckle. • Fits racks with hex drive, two flats and round ends. • Ideal for vehicles with limited access and avoids the need to remove the rack assembly. • Suitable for steering rack knuckles with a diameter of Ø33-41mm.
Tool Model No. SEA VS705 Composite cone. Enables installation of CVJ boot without splitting drive train. Suitable for use with all Sealey CVJ stretch boots. CVJ Boot Installation Tool Model No. SEA SX027 • Heat treated alloy steel socket. • 35mm Hex drive with Ø19mm internal clearance for OEM and non-OEM fittings. • Ø50mm Ring with drive pegs which locate in slots cut in the ball joint flange. • Suitable for Citroen and Peugeot 405 lower ball joints. Lower Ball Joint Socket Peugeot 405/Citroen Model No. SEA SX0271 • Set of two heat treated alloy steel sockets. • Suitable for removal of OEM and aftermarket lower ball joints. • Applications: Citroen; Xantia, C5, C6, Peugeot; 405, 406, 407, 605, 607. • Supplied in storage case.
Set Model No. SEA SX028 • Suitable for the removal and installation of top shock retaining nut. • Location pegs fit into slots cut in the retaining ring and allow hex key access through the centre for release/adjustment of the shock. • Internal Ø x Tooth Width: Ø14.5 x 5mm. • Use with 22mm spanner.
Model No. SEA SX034 • Reduces risk of damage to hub casting. • Includes two sizes of pry socket: 7 x 5mm and 8.2 x 5.5mm. • Suitable for removal and installation of strut legs on most Audi, Ford, Peugeot, Renault, Seat, Skoda, VW. 2pc 1/2"Sq Drive Strut Leg Pry Socket Set
• Innovative tool saves time, money and frustration. • Installs CVJ boots without removing drive shafts from the vehicle or the CV joint from the drive shaft. • No effort and no mess! • Save on labour time by up to 70% and prevent damage to CV joint. • Composite body with simple control valve, works from standard workshop air supply. • While fitting boot the tool can be removed from the air line when pressurized (arms open) and will maintain pressure until the release button is pressed. Suitable for cars and light commercial vans. CVJ Boot Tool - AirWheel & Tyre Handling Dolly 127kg Capacity • For commercial sized wheel and tyre removal/installation. • Fork Centres: 535mm. • Length: 1255mm.
2pc Coil Spring Compressor
1500kg Hydraulic
Ball
Model
Ball Joint Splitter
Coil Spring
Model
23 VEHICLE SERVICE Model No. SEA AK273 Three forks with interchangeable shafts for use with ball pein hammer or air hammer with .401" shanks. Suitable for most small cars and light commercials.
5pc
Ball Joint Splitter Kit Model No. SEA AK381 • Chemically blackened forged steel body with thrust bolt. • Suitable for most small cars and light vans. • Jaw Capacity: 19mm.
Joint Splitter
No. SEA AK382 Forged steel body with phosphate finish. • Suitable for most small cars and light vans.
No. SEA AK3821 Drop-forged and heat treated alloy steel. • Suitable for applications with awkward or limited access. 400mm Long Reach Ball Joint Splitter Model No. SEA AK3841 screws and cast jaws. • Wrapover coil claws for extra safety. • Suitable for use where space under wheel arch is limited. • Use with 1/2"Sq drive wrench. Maximum Jaw Opening: 244mm. • Maximum Capacity Per Pair: 1000kg.
Model No. SEA AK3846 • Carbon steel, hardened lead screws and cast jaws. Wrapover coil jaws for extra safety. Long reach jaws are ideal for the longer type of coil spring found on modern vehicles. Maximum Capacity Per Pair: 1100kg. 2pc Long Reach Coil Spring Model No. SEA RE231 1500kg Capacity foot operated hydraulic unit. Quicker and easier than using ratchet driven spring compressor. • Plastic coated yokes reduce the risk of spring slippage/damage. • Suitable for springs from Ø80mm to Ø175mm.
Coil Spring Compressing Station Model No. SEA RE23RS • Safety restraint system designed for use with Model No's RE231, RE2311 and RE232 Coil Spring Compressors. • Quickly installed and fast and simple to operate in use. • Model No. RE23RS • N.B. Coil Spring Compressor not included.
Compressor Restraint System Model No. SEA CV001 • Drop-forged, 8-point, steel impact socket designed for the removal of front hub nut found on Scania trucks. Model No. SEA CV085 • Chrome Molybdenum, drop-forged, 6-point impact socket. • Phosphate finish for greater corrosion resistance. • Ideal for use with air impact wrenches. Model No. SEA SX0150 • Forged and heat treated Chrome Vanadium steel impact grade sockets, chemically blackened for corrosion resistance. • Malleable steel makes these sockets suitable for use with either hand ratchet wrenches or air impact wrenches. 80mm Front Hub Nut Socket Scania 3/4"Sq Drive 85mm Impact Socket Commercial 1"Sq Drive 65mm 12-Point Impact Socket 3/4"Sq Drive
Automotive fuel line and air conditioning hose disconnection set.
Suitable for a wide variety of vehicles with quick disconnect couplings.
Compatible with low profile fuel lines on a range of Ford, Vauxhall/Opel, Mazda and Chrysler. Designed for automotive fuel, A/C and transmission cooler lines.
Made from a tough durable plastic that is resistant to fuel and solvents.
• Offset handles are ideal to access fittings in tight spaces.
Model No. SEA VS0555
Universal Clutch Alignment Tool
38pc Injector Bore Cleaning Brush Set
Panel Bag Sets
Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting.
38-Piece set includes brass, steel and nylon brushes 8-19mm. Soft grip handle.
• One-Piece 150mm Extension.
• Storage case included.
Model No. SEA VS1910
Automatic Gearbox Oil Filler Set
9G-Tronic
• Nylon components with steel main shaft.
• Fits 90% of cars and light vans up to 5 tonne gross (not suitable for vehicles with double plate clutches).
• Supplied with three different sized expanding collets.
Model No. SEA VS010
• Suitable for 9G Tronic 725 series gearboxes fitted to Mercedes E350 BlueTEC (2013on) and CLS models (2014on).
• Contains a socket wrench to adjust oil level and a quick release coupling.
• Designed for drain and refilling operations.
Model No. SEA VS589
• Multipurpose durable air cushion devices with rigid edges and fine air control valve.
Suitable for positioning panels (bonnets + boots) prior to fitment.
Can be used to improve access for emergency vehicle opening tools.
Soft air cushion is gentle on paintwork, frame, beadings and glass.
Can also be used for positioning kitchen units, windows and doors.
3L
Oil Filling System
• Pump operated oil dispensing unit with a 3L capacity.
• Supplied with five multipurpose and three vehicle specific automatic transmission fluid adaptors. Features a fluid control and depressurising
Model No.
VS70095
25 VEHICLE SERVICE
A/C & Fuel Line Disconnection Set
Mercedes
SEA
valve. Hose Length: 1.5m.
Transmission
Model No. SEA RE239 • Suitable for MacPherson strut coil springs. • Supplied with two pairs of different sized interchangeable yokes, for left-handed coil springs. • Plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer's guarantee. • Safety yokes carefully shaped to stop the spring bowing while under compression. • Capacity: 2500kg. • Maximum Jaw Opening: 265mm. • Drive: 21mm Hex. Professional Coil Spring Compressor Kit Left-Hand Model No. SEA RE249 • Suitable for MacPherson strut coil springs. • Supplied with five pairs of different sized interchangeable yokes, for right and left-handed coil springs. • Plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer's guarantee. • Safety yokes carefully shaped to stop the spring bowing while under compression. Professional Coil Spring Compressor Set Right-Hand/Left-Hand Model No. SEA RE259 • Suitable for MacPherson strut left-handed coil springs. Compatible with models RE229, RE239 and RE249. Coil Spring Yokes - Left-Hand Model No. SEA VS9114 Model No. Set Qty SEA VS9111 2pc SEA VS9112 2pc SEA VS9113 2pc SEA VS9114 3pc
•
•
up to
HD for video recording,
and still
design makes the image incredibly clear but also very portable.
controls for light intensity, digital zoom and image rotation.
probe pod
by 2600mAh rechargeable with 5 hour working time (USB
storage (not
Ethylene Glycol Antifreeze
• Tests ethylene glycol strength with engine hot or cold.
• Composite body and rubber bulb for workshop durability.
Model No.
Checks condition of coolant antifreeze, hot or cold.
Protection level is indicated by the number of discs floating in the sample.
Easy-to-read temperature table.
• Tough, virtually unbreakable, plastic body.
Model No.
Cooling System Filler
Coolant System Flush Gun
Accurately measures the strength of battery fluid, screenwash, antifreeze and AdBlue ® by measuring the refractive index of light passing through the mixture.
• Suitable for synthetic antifreeze mixtures including long-life OAT (Organic Acid Technology), G13 and aqueous/urea content of AdBlue ®
• Eyepiece with adjustable focus.
calibration check
• Eliminates the introduction of bubbles and air-locks into the cooling system and dramatically reduces system filling time.
• Automatically conducts system leak test.
• Enables thorough flushing of debris and contaminants from cooling system during repair and maintenance.
• Powered by workshop air, which creates a vacuum to draw water from a container.
• Can also be used with mains pressure tap water.
Model No.
• Low profile design broadens application range especially for use on MPVs where lower windscreen lip might obstruct other tools. Supplied with 1.3m fluid hose.
Propylene Glycol Antifreeze Tester
Model
26 VEHICLE SERVICE
Large 110mm LCD screen with a resolution
1080p full
playback
images.
Tablet
Features
Waterproof
with IP67 rating. Powered
Charging cable supplied). SD card can be installed to achieve file
supplied). • Kit includes 45° mirror, hook and magnetic pick-up. • Cable Length: 2m. Tablet Video Borescopes Model No. Camera Diameter SEA VS8114 Ø3.9mm SEA VS8115 Ø5.5mm SEA VS8116 Ø8mm Model No. SEA HVCOM1 Contents: APPD7O, SF30OR (x3), SF50OR (x3), PPHY, BYSBKIT, HVG1000VL, HVM17K02, TA319, HVSA4, HYBRIDTAG, HYBRIDSIGN, AK83452, AK6124, AK63171, AK7940, STW803, AK7177, AK7178, HRP45 EV/Hybrid Master Tool Kit
SEA AK409
Tester - Dial Type
SEA AK4120
SEA VS0041
No. SEA VS0044
Model No. SEA VS0052
• Simple
using distilled water. Refractometer Antifreeze/ Battery Fluid/Screenwash/ AdBlue Model No. SEA VS0061F • Detector fluid refill for VS0061 and VS0062. 250ml Combustion Leak Detector Fluid Model No. SEA VS4121 • Tests propylene glycol antifreeze mixtures. • Features a temperature compensation rotor that automatically adjusts the reading regardless of the coolant temperature. • Freeze protection level is indicated on the scale in degrees Celsius.
Twin-Rotor Model No. SEA VS166 • Suitable for removal of tag and wire type hose clips. • Features ratchet locking mechanism for ease of use on lower radiator hoses. • Swivel jaws allow use where access is confined. • PVC dipped handles for improved grip and comfort. OR Model No. SEA VS8114
Heavy-Duty
28 VEHICLE SERVICE Model No. SEA AK521 Chrome finish shafts with knurling for fingertip precision. Suitable for removal of bushings, cotter pins, O-rings and seals. • Classic style handle. • Overall Length: 125mm. 4pc Mini Hook Set Model No. SEA AK522 • Double end tool suitable for use with all types of O-ring and grease seal. • Knurled barrel gives extra grip to greasy hands. O-Ring & Seal Pick Model No. SEA VS857 • Quality 22mm EVA mats ideal for the busy mechanic. • Oil and water-resistant. • Set comprises full length and kneeler mats. • For use on workshop floors when working on wheels, brakes, tyres and exhausts. • Also ideal for roadside repairs. • Sizes: Kneeler; 385 x 280 x 22mm, Full-length; 890 x 390 x 22mm. 22mm Mechanic's Mat Set EVA Model No. SEA HP55K1COMBO • Package includes: RWSBKIT - 25m Red/White Post & Chain Kit HVSA4 - 200 x 300mm High Voltage Warning Sign HYBRIDSIGN - Hybrid/Electric Vehicle Warning Sign (x2) HYBRIDTAG - Hybrid/Electric Vehicle Keyring Warning Tag • Ideal for technicians working on modern hybrid and electrical vehicles Exclusion Zone Kit Model No. SEA CSC5 • Set includes two reusable front seat covers. • Manufactured from water-resistant lightweight nylon. • Ideal for protecting the vehicle's interior from dirt, grease and oil, as well as food and drink spills. • Suitable for most cars and light commercial vehicles. • Can be fitted to seats with or without airbags. • Seat back H850 x W600mm. • Seat base W600 x D440mm. 2pc Lightweight Front Seat Protector Set Model No. SEA VS2310 • Induction coil for Model No's. VS230 & VS250. Induction Coil - Flex 920mm Model No. SEA VS806 Cast housing with ball-end thrust bolt for the fast and safe removal of taper mounted windscreen wiper arms. Wiper Arm Removal Tool Model No. SEA VS807 Heavy-duty construction with locking feature allowing secure fastening to the wiper arm before commencing pull. • With swivel mounted thrust bearing and tommy bar, the tool releases the most stubborn wiper arms. • Also suitable for battery terminal and alternator bearing removal. • Maximum Opening: 28mm. • Maximum Collar Size: 43mm.
Wiper Arm Puller Model No. SEA RT007 • Suitable for the removal of door trim clips on most vehicles. • Features coated U-profile tip to reduce the risk of damage to surrounding trim and contoured textured comfort grip handle. Door Trim Clip Tool
5pc Trim & Upholstery
• Tools designed to simplify trim and trim stud removal.
• Manufactured from resilient plastic to minimize panel damage and marking.
Trim Clip Removal Pliers
Model No.
RT/KIT
12pc Trim & Upholstery Tool Set
Trim Clip Tool
• Spring loaded pliers for trim clip removal without trim damage.
• Easy-access into confined areas, such as bumper covers.
• Length: 240mm.
Windscreen
Model No. SEA RT004
Comprehensive set, designed to simplify trim and trim stud removal.
• Manufactured from resilient nylon to minimize panel damage and marking.
• Includes 11 trim and upholstery tools, plus trim hammer in a heavy-duty storage pouch.
Model No. SEA RT12KIT
3pc Mini Trim Panel Removal Set
Hardened and tempered carbon steel shaft with clawed head.
trim and trim stud removal.
• Contoured, textured comfort grip handle.
• Length: 250mm.
6pc Trim Clip Tool Set
Model No.
• Braided stainless steel wire suitable for use with wire grips.
• Use a sawing action to cut through the urethane bond.
Length: 22.5m.
Model
• Ideal for removing interior trim, vents and battery replacement on key fobs.
• Slim profile and manufactured from resilient nylon to minimize panel damage and marking.
Model No. SEA RT014
• Designed for the removal of trim clips found on most vehicles.
• Comprises long and short reach steel shafts with clawed heads.
• Contoured and textured comfort grip handles.
7pc Windscreen Removal Tool Kit
Model No. SEA RT06
steel
and easy cutting
22.5m.
Reinforced
handles with
treated chromed steel
the removal of
eye
29 VEHICLE SERVICE
SEA
Tool Set
SEA RT002
Simplifies
No. SEA WK0513
•
Cutting Wire - Braided Model No. SEA WK3
composite
heat
shafts. A complete tool kit for
bonded and rubbered screens. Handles include hanging
for storage.
Model No. SEA WK0514 • Becoming more popular than braided wire. • Stainless
square profile has four cutting edges. • Fast
of urethane bond even in cold conditions. • Length:
Windscreen
Cutting Wire - Square
Automatic Wire Stripping Tool
Heavy-Duty Automatic Wire Stripping Tool
Ratchet Crimping Tool
Insulated Terminals
Plate-steel construction, chemically blackened with oversize vinyl grips.
5-in-1 Wire stripper suitable for wires from 0.13-6mm² (26-10AWG).
Crimping attachment suitable for non-insulated terminals including 1.5, 2.5, 4 and 6mm², also insulated auto-ignition terminals 7 and 8mm.
Crimps insulated terminals 1.5, 2.5 and 6mm².
• Includes wire cutters hardened to 40-50 HRC.
Tester
Model No. SEA AK225
Heavy-duty, professional automatic wire stripper with alloy steel jaws.
Fully automatic, single action, grips and strips all types of wire 0.2-6mm² with minimal pressure to handles and no damage to the inner core of the wire.
• Adjustable length stop is easily swivelled to allow longer stripping.
• Precision machined wire cutting blades for long-life.
• All steel construction with large comfort grip handles and plate stamped jaws.
• Suitable for 6-24V DC circuits.
• Knurled brass body with test light.
• Probe tip is covered with
• Tester illuminates when voltage is
• Supplied
Model No.
SEA
• Features three crimping elements for insulated, non-insulated (1.5-6mm²) and auto-ignition terminals (7-8mm).
• Ratchet action ensures consistent crimping.
Model No. SEA AK2255
6/12/24V Circuit Tester with Test Light
• Terminal Suitability: 0.5-1mm², 1.5-2.5mm², 4-6mm².
&
Model No. SEA AK385
• Suitable for testing 6, 12 and 24V DC circuitry.
• Insulated, pointed probe tests through wire insulation.
• Supplied with 1.5m cable and crocodile earth clamp.
Model No.
Model No.
30 VEHICLE SERVICE
AK4008
protective brass screw cap.
present.
with cable and alligator earth clip.
6-24V
Circuit
SEA AK402
SEA FF400 Find short and open circuits quickly and easily. Simply attach the sender unit to the circuit and follow the wires using the detector. • Ideal for automotive repairs. • Suitable for all DC circuits up to 42V. • Supplied in storage case. • Powered by two 9V batteries.
6-42V
Open
Short DC Circuit Detector Model No. SEA PP1 • Fitted with 4.8m cable allowing access to the rear of the vehicle. • Just some of the tests, which can be done quickly and efficiently on systems from 6V up to 24V: - Cooling fan motors - Fuel pumps - Window/Sunroof motors - Relays and Lamps - Wiper motors 6-24V Auto Probe with 4.8m Cable Model No. SEA PP100 • Features a scope function to visually test component signals, with the added benefit of maximum/minimum volts, frequency and duty cycle displayed. • The fly lead allows continuity and polarity testing with a high-contrast colour LCD display giving a 7mm high read-out. • Features an audible continuity and positive/negative voltage indicator. • Two integral work lights. • 6m Lead connects to the battery supply and reaches to all areas of the vehicle. • Includes a vehicle accessory socket adaptor and 6m extension cable. 0-30V Power Scope Automotive Probe Model No. SEA TA120 • Fast, accurate and safe current measurement at the fuse box. • Ideal for fault-finding on car and commercial vehicle electrical circuits. • Features large LCD display. • Plugs straight into the vehicle's fuse board. • Range: 0-20A - 0-48V. 20A Automotive Current Tester Standard Blade Fuse
Battery Monitor Sensor & Vehicle Finder
In-Line
Model
31 VEHICLE SERVICE Model No. SEA VS526 • Tests HT supply to spark plug. • Quick and simple fault diagnosis.
Ignition/HT Spark Tester Model No. SEA VS222 • Five pairs of coloured cables. • Each cable has shrouded crocodile clips at each end. Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring. Jumper Test Lead Set - 5 Pairs x 450mm
No. SEA BT2020 • Displays real time battery power, voltage and temperature. Wireless connection with dedicated app which supports up to four devices (IOS & Android compatible). Guide user back to the vehicle by automatically recording the last parking location. Record the route, cost and driving habits of each trip, which can be exported to Excel. • Automatically monitor the starting and charging system of the vehicle and notify if abnormal. • Compatible with most batteries including lead sealed, AGM and Gel. • Supports up to four devices. • Store historical data in device for up to 30 days.
Model No. SEA TM102 • High precision auto-ranging multimeter. • Conforms to EN 61010-1 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use. • Temperature measurement capability, max./data-hold and auto-power-off function. • Probe and lead storage and integral upright stand for use on the workbench. • Supplied in zipped pouch with carry strap. 8-Function Professional Auto-Ranging Digital Multimeter Model No. SEA AK871 • Quickly locates the source of engine noise such as piston slap, worn gears and bearings, damaged valves, water pump failure and blown gaskets and even dashboard squeaks. Plastic ear pieces and 300mm probe with sound amplifying chamber. Technician's Stethoscope Model No. SEA MM19 • High quality general-purpose multimeter with a large (46 x 25mm), clear and easy-to-read LCD display. • Supplied with test leads. • Measures: - AC and DC Voltage - DC Current - Resistance - Audible Continuity - Diode/Transistor Verification Mode vehicle via the vehicle accessory power socket. • Fitted with 250mm cable and powered by connection to vehicle. 7-Function Multimeter Model No. SEA AK410 Tests 6, 12 and 24V batteries. Composite body and rubber bulb for workshop durability. 6/12/24V Battery Fluid Tester - Dial Type Model No. SEA AK414 Professional battery hydrometer. Tests 6, 12 and 24V batteries. Float gauge and thermometer built-in. Tube construction with thermometer for temperature compensation. 6/12/24V Battery Fluid Tester - Tube Type Model No. SEA AK500 12V Battery & Alternator Tester - LCD Screen
Battery Terminal
6pc
Battery Fluid Filler
Bonded
Printing Roll
32 VEHICLE SERVICE Model No. SEA AK417 • Wire brushes remove corrosion build-up on battery posts and terminals for improved electrical contact. Battery Post & Terminal Cleaner Model No. SEA AK419 • Mini puller with spring loaded jaws designed for removal of corroded battery clamps from terminals. • Also suitable for removal of small gears, pulleys and bearings.
Puller Model No. SEA BT2003.V2-01 Suitable for Model No's BT2003, BT2013 and other leading brands of battery tester.
for BT2003, BT2013 Pack of 2 Model No. SEA SX400 • Easy removal of freewheel pulley from alternator either on or off the vehicle. • Allows alternator shaft to be held while the pulley retainer is removed. • Applications: Audi, BMW, Citroen, Ford, Mercedes, Peugeot, Porsche, Renault, Skoda, Vauxhall/Opel.
Alternator Freewheel Pulley Removal Set Model No. SEA VS2072 • Attaches to a 12V slave battery and provides power via the EOBD socket to on-board electronics whilst vehicle’s own battery is disconnected. • Features LED to indicate back-up battery power supply status. • Saves valuable time spent re-programming lost codes. Diagnostic Socket Memory Safe - EOBD Model No. SEA AK420 Aluminium handle with heavy-duty steel cable. Specially shaped blade is suitable for cutting through bonding resin used to fix modern windscreens. 2-Handed operation permits tool to be accurately guided whilst cutting through bonding.
Windscreen Removal Tool Model No. SEA AK4124 • Fluid transfer tool suitable for battery top-up and level adjustment of coolant and screenwash. • Spout Length: 130mm. • Bulb Capacity: 150ml.
Model No. SEA BT91/7 • American-style drop tester. • Load applied by internal switchgear - no sparking. • Suitable for 6 and 12V batteries. • Applies load across cells and measures output on meter. • Accurate indication of battery voltage and faulty or short circuited cell. 6/12V Battery Drop Tester Model No. SEA BT91/7PF • American-style drop tester. • Polarity protected cables - impossible to damage unit by incorrect connection. • Load applied by internal switchgear - no sparking! • Suitable for 6 and 12V batteries. • Applies load across cells and measures output on meter. • Accurate indication of battery voltage and faulty or short circuited cell. 6/12V Professional Battery Drop Tester - Polarity Free
3/8"Sq Drive Calibrated Micrometer Torque Wrench
• Heat treated steel ratchet head.
• Fully hardened and tempered.
• Chrome plated for corrosion resistance.
• Range: 20-110Nm(15-81lb.ft).
• Calibration tolerance in accordance with BS EN ISO 6789-1:2017.
• Every wrench is tested and supplied with an individually numbered test certificate.
• Micrometer type torque range adjustment with scale graduated in both lb.ft and Nm.
• Flip reverse ratchet mechanism.
1/2"Sq Drive Breaker Bars
Model No.
AK623
• Range: 40-210Nm(30-155lb.ft).
• Chrome Vanadium steel ratchet head with smooth action mechanism.
• Calibration tolerance in accordance with BS EN ISO 6789-1:2017.
• Scales graduated in both Nm and lb.in/lb.ft.
• Wrenches are individually tested to standards with ±4% accuracy and each wrench is issued with an individually numbered test certificate. Supplied in storage case.
Model No. SEA STW102
1/2"Sq Drive Knuckle for AK730 & AK7302
Hardened and tempered Chrome Vanadium steel bars with high chrome finish.
• Long, slim style handles and spring loaded socket retention.
• Fully replaceable knuckle joint*.
• Knuckle joint for Model No's AK730 and AK7302
Drive Breaker Bars.
4pc Heavy-Duty
Model No.
AK730/RK
33 HAND TOOLS
SEA
SEA
1/2"Sq
1/2"Sq Drive Torque Wrench Micrometer Style Calibrated Model No. SEA AK9105 • Heavy-duty, angled shafts. • Chrome Molybdenum steel with blackened finish. • Comfortable soft grip handles with hammer cap. • Contents: 200, 300, 460, 610mm.
Pry Bar Set with Hammer Cap Model No. SEA AK505 Suitable for producing single or double flares on copper, brass or thin-walled aluminium pipe. Contains: Flare Press, Retaining Bracket, Dies - 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8". Packed in tough storage case. Not suitable for steel pipe. 9pc Pipe Flaring Kit Model No. SEA AK506 Tubing kit suitable for cutting and flaring copper, brass or thin walled aluminium pipe. Includes screw-type tube cutter with die-cast frame and integral deburring tool. • Dies: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8". 10pc Pipe Flaring & Cutting Kit Model No. SEA AK7302 Model No. SEA AK7301 *Note: Knuckle joints are not covered by the lifetime guarantee and are treated as consumable items. Model No. SEA AK730 Model No. Length SEA AK7301 450mm SEA AK730 600mm SEA AK7302 750mm
Model
3pc
Pliers
Needle
Circlip Pliers
• hardened and tempered steel.
• Internal and external, in both straight and bent configuration.
• Pliers are fully polished and fitted with non-slip polyfoam grips.
Min./Max. Circlip
19-60mm.
from hardened and heat treated
Vanadium steel.
Finely ground heads with a fully polished finish.
Serrated, machined jaws for a positive grip.
Long, slim design ideal for use in areas with limited access.
Vinyl dipped handles for comfort and control.
Supplied in storage/ hanging pouch.
Screwdriver, Hex
Manufactured from hardened and tempered drop-forged Chrome Vanadium steel.
Finely ground head with a fully polished finish.
Serrated, machined jaws for a positive grip.
Long, slim, double jointed design.
for use in areas with limited access while
handle spread to a minimum.
Vinyl dipped handles for comfort and control.
44pc Hammer-Thru Screwdriver, Hex Key & Bit Set
Model
34 HAND TOOLS • Part of the Siegen by Sealey range of quality tools at competitive prices. • Chrome Vanadium steel bits. • Hardened and tempered for added strength. • Set includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors. • Contents: TRX-Star* Bits; T20, T25, T30, T40, T45, T50, T55 (1 each 30 & 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 and 75mm), Spline Bits; M5, M6, M8, M10, M12 (1 each 30 and 75mm), Drive Adaptors; 3/8"Sq x 10mm Hex, 1/2"Sq x 10mm Hex. 40pc 3/8" & 1/2"Sq Drive TRX-Star*/Hex/Spline Bit Set • Feature hexagonal bolsters for use with a wrench. • Contoured, textured handles with hammer caps. • Contents: Slotted; 6 x 38, 5 x 100, 6 x 125, 8 x 150, 8 x 200, 10 x 200mm, Phillips; #2 x 38, #1 x 75, #2 x 100, #2 x 150, #3 x 150mm. 11pc Hammer-Thru Screwdriver Set Contents: Screwdrivers; Slotted - 3 x 75, 4 x 100, 5 x 100, 6 x 125, 8 x 150mm, Phillips - #0 x 75, #1 x 75, #2 x 100, #3 x 150mm, Pozi - #0 x 75, #1 x 75, #2 x 100, #3 x 150mm, TRX-Star*T25 x 100, T27 x 100, T30 x 125, T40 x 125mm, Bit Driver, 1/4"Hex Bits; TRX-Star* - T7, T8, T9, T10, T15, T20, Hex - 3, 4, 5, 6mm, Hex Keys; Metric - 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm, Imperial - 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4". 44pc
Key & Bit Set Contents: Screwdrivers; Slotted - 3 x 75, 4 x 100, 5 x 100, 6 x 125, 8 x 150mm, Phillips - #0 x 75, #1 x 75, #2 x 100, #3 x 150mm, Pozi - #0 x 75, #1 x 75, #2 x 100, #3 x 150mm, TRX-Star* - T25 x 100, T27 x 100, T30 x 125, T40 x 125mm, Bit Driver, 1/4"Hex Bits; TRX-Star* - T7, T8, T9, T10, T15, T20, Hex - 3, 4, 5, 6mm, Hex Keys; Metric - 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm, Imperial - 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4".
No. SEA AK668 Quality set with deep-cut jaws. Coated in black anti-rust finish. Sizes: 125, 175, 250mm. Maximum Jaw Capacities: 30, 40, 45mm. 3pc Locking Pliers Set
•
Capacity:
4pc
Set • Manufactured
Chrome
•
•
•
•
•
280mm
Nose
Set
No. SEA AK8590 •
•
•
•
• Ideal
keeping
•
• Length: 335mm. 335mm Double Joint Flat Nose Pliers Model No. SEA S0982 Model No. SEA S01106 Model No. SEA S01090 Model No. SEA AK4933 Model No. SEA AK8568 Model No. SEA AK8440 • Contents: TRX-Star* Bits; T20, T25, T30, T40, T45, T50, T55, T60 (1 each 30 and 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 and 75mm), Spline Bits; M5, M6, M8, M10, M12 (1 each 30 and 75mm), Drive Adaptors; 3/8"Sq x 10mm Hex, 1/2"Sq x 10mm Hex. 42pc 3/8" & 1/2"Sq Drive TRX-Star*/Hex/Spline Bit Set Model No. SEA AK21974 • Manufactured from Chrome Vanadium 6150 steel. • Long and short ribe, spline, hex, TRX-Star* and security TRX-Star* bits. • Set includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors. 74pc 3/8" & 1/2"Sq Drive TRX-Star*/ Security TRX-Star*/Hex/Ribe/Spline Bit Set Model No. SEA AK219
34pc 1/2"Sq Drive Impact
Set
70mm
Impact
8pc TRX-Star* Screwdriver Set
35 HAND TOOLS • Contents: Screwdrivers; Slotted - 6 x 38, 3 x 75, 4 x 100, 5 x 100, 6 x 100, 6 x 150, 8 x 200mm, Phillips - #0 x 75, #2 x 38, #1 x 100, #2 x 100, #3 x 150mm, Pozi - #0 x 75, #1 x 100, #2 x 100, #3 x 150mm, VDE; Slotted - 3 x 75mm, Phillips - 0 x 75, 1 x 80, 2 x 100mm, TRX-Star* - T20 x 100, T25 x 100, T27 x 100, T30 x 125, T40 x 125mm, Bit Driver, 1/4"Hex Bits; TRX-Star* - T7, T8, T9, T10, T15, Slotted - 4, 6mm, Phillips - #1, #2 (x2), #3, Pozi - #1, #2 (x2), #3, Hex - 3, 4, 5, 6, 7, 8mm, Square - 1, 2, 3mm, Nut Drivers; Metric - 6, 7, 8, 10, 12mm, Imperial - 3/16", 1/4", 5/16", 3/8", 7/16", Magnetizer/Demagnetizer. 61pc Hammer-Thru Screwdriver, Bit & Nut Driver Set Model No. SEA S0897 • Hardened and tempered Chrome Vanadium steel shafts with a satin finish. • Shot blasted and magnetized tips. • Contoured handles with soft rubber grip for comfort and control. • Sizes: T8 x 75, T10 x 75, T15 x 100, T20 x 100, T25 x 100, T27 x 100, T30 x 125, T40 x 125mm.
• Manufactured from Chrome Vanadium steel, hardened, tempered and with a phosphate finish for added corrosion resistance. • Standard depth 6-point WallDrive ® sockets allow a transfer of up to 30% more torque to the fixing. • Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm. 13pc 1/2"Sq Drive Impact Socket Set • Master set of impact sockets manufactured from Chrome Vanadium steel. • Hardened and tempered with a phosphate finish for added corrosion resistance. • Standard and deep WallDrive ® sockets allow a transfer of up to 30% more torque to the fixing. • Contents: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm (1 of each Standard and Deep), 125mm Extension Bar, Universal Joint. Supplied in storage case.
Socket
• Chrome Molybdenum, drop-forged, WallDrive ® impact socket. • Phosphate finish for greater corrosion resistance. • Ideal for use with air impact wrenches.
1"Sq Drive Impact Socket Model No. SEA AK5403 • Drop-forged steel adaptor. • Suitable for use on all types of air impact tool. • Chrome Molybdenum steel with phosphate finish for added corrosion resistance.
Adaptor 3/4"Sq Drive Female - 1/2"Sq Drive Male • Comprehensive set of impact adaptors for use on all types of impact tools. • Manufactured from drop-forged Chrome Vanadium steel with phosphate finish for added corrosion resistance. • Sizes: 1/4"(F) x 3/8"(M), 3/8"(F) x 1/4"(M), 3/8"(F) x 1/2"(M), 1/2"(F) x 3/8"(M), 1/2"(F) x 3/4"(M), 3/4"(F) x 1/2"(M), 3/4"(F) x 1"(M), 1"(F) x 3/4"(M). 8pc Impact Socket Adaptor Set Model No. SEA AK4929 • Manufactured from hardened and tempered Chrome Vanadium steel with 1/4" hexagon shanks. • Ideal for use with all electric/air drills. • Suitable for repetitive applications which require 1/4", 3/8" or 1/2"Sq drive sockets. • Features spring-ball socket retainers. 3pc Power Tool Socket Adaptor Set Model No. SEA AK5613M Model No. SEA AK5634M Model No. SEA AK5900 Model No. SEA IS170 Model No. SEA SX006 • Forged and heat treated Chrome Vanadium steel impact grade bi-hex deep socket, chemically blackened for corrosion resistance. • Malleable steel material makes the socket suitable for use with either hand ratchet wrenches or air impact wrenches. 36mm Bi-Hex 1/2"Sq Drive Deep Impact Socket deep socket, chemically blackened for corrosion resistance. • Malleable steel material makes this socket suitable for use with either hand ratchet wrenches or air impact wrenches. 41mm 1/2"Sq Drive Deep Impact Socket Model No. SEA SX007 Model No. SEA S01153
Flare Nut Spanner
36 HAND TOOLS Model No. SEA AK1214 • Tidy storage for loose sockets. • Carry rail to the job or mount onto wall or toolbox. • Handle marked with drive size. • Supplied with 14 socket clips. 1/2"Sq Drive Socket Retaining Rail with 14 Clips Model No. SEA AK211 • Wall or toolbox mounting magnetic rack. • Size: 500 x 40mm. • Suitable for retaining frequently used steel tools such as screwdrivers, spanners and pliers. • Supplied with fixing screws. 500mm Magnetic Tool Holder Model No. SEA AK231 • Ø150mm Stainless steel bowl. • High powered Ø80mm magnet with non-marking cover. • Ideal for retaining screws, nuts and bolts during dismantling operations. • Attach to any ferrous metal surface. Ø150mm Magnetic Collector Model No. SEA VS3005 • 2-Piece set consisting of 16 and 17mm ring spanners for Mercedes Benz engine mount bolts. • 12-Point ring spanners with Internal 3/8"Sq drive. • Ideal for removing engine mount bolts in tight spaces. 2pc Mercedes Benz Engine Mount Spanner 16 & 17mm Model No. SEA S0506 • Chrome Vanadium steel. • Forward/reverse and quick release. • Slim style contoured handle. 1/4"Sq Drive Ratchet Wrench Model No. SEA SLH10 • Fine grained alloy steel head, heat treated, induction-hardened and tempered with double precision ground polished striking face. • Fitted with straight-grained hickory shaft. • Manufactured in accordance with BS 876. 10lb Sledge Hammer with Hickory Shaft • Chrome Vanadium steel. • Fully polished heads. • Size clearly marked. • Hardened and tempered for long-life. • Made to DIN standards. Combination Spanners Model No. Size SEA S0408 8mm SEA S0413 13mm SEA S0417 17mm SEA S0419 19mm SEA S0424 24mm Model No. SEA S0635 • Chrome Vanadium steel flexi-head ratchet combination spanner set. • Sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm. • 72-Tooth ratchet ring and gear set requiring only 5° rotation to pick up the next tooth, ideal for applications where space is limited. • Supplied in storage/carry rack. 12pc Flexi-Head Combination Ratchet Spanner Set Model No. SEA S0767 • Drop-forged steel spanners with contoured shafts. • Fully hardened, tempered and chrome plated for resistance to corrosion. • Flare type jaw suitable for most common sizes of compression joint. • Sizes: 6 x 8, 10 x 12, 13 x 14, 15 x 17, 19 x 21, 22 x 24mm. • Supplied in storage/hanging pouch. 6pc
Set Model No. SEA S0424
Retractable Snap-Off Knife
Locking Pocket Knife
Composite handle with rubber comfort grip and steel reinforced blade holder.
8-Section blade automatically retracts and locks into position.
• Supplied with two spare blades in handle storage.
• Fitted with blade snapper.
Model No. SEA AK86R
Telescopic Magnetic Pick-Up Tool 1.5kg Capacity
• Supplied with a high quality stainless steel blade.
• Fitted with lightweight aluminium handle inlaid with rubber grip for added comfort and control.
• Blade locks open for safe use.
• Supplied with belt clip.
Lightweight aluminium/composite handle construction.
Multi-tool functions include combination pliers, long nose pliers, wire cutter, fine edge blade, bottle opener, can opener, slotted screwdrivers, Phillips screwdriver, fish scaler, file, hook remover, ruler, wood saw and single/double file.
Multi-Tool Lengths (Open/Closed): 160/105mm.
Supplied with belt pouch.
Knife features both utility and fine edge blades.
Push-button locking mechanism secures blades in both open and closed position.
Model No. SEA PK1
Ø40mm Telescopic Articulated Inspection Mirror
• Twin Blade Knife Lengths (Open/Closed): 180/110mm.
• Ideal for camping and leisure activities.
Telescopic Magnetic Pick-Up Tool 1kg Capacity
Model No. SEA PK27
• Telescopes to less than pen size for convenient pocket storage.
• 1.5kg Pick-up capacity from Ø10mm magnet.
• Min./Max. Length: 130/650mm.
Model No. SEA AK6511
10pc 3/8“Sq Drive Open-End Crow's Foot Spanner Set
• Chromed metal body with pocket-clip for safe storage.
• Ø40mm inspection mirror mounted on ball joint permitting full 360° rotation.
• Minimum/Maximum Length: 125/690mm.
Ø60mm Flexible Shaft Inspection Mirror
Model No. SEA AK652
Chromed metal body with pocket-clip for safe storage.
1kg Pick-up capacity from Ø10mm magnet.
Minimum/Maximum Length: 130/650mm.
Manufactured from hardened and tempered Chrome Vanadium steel with a fully polished finish. Suitable for limited access applications.
Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm. Supplied on storage rail.
Model No.
• Rubber grip and strong, spring steel flexible shaft.
• Ø60mm Mirror.
• Suitable for use in confined areas.
• Length: 485mm.
Model No.
with
37 HAND TOOLS
SEA S0866
SEA AK6503
2pc 15-Function
Multi-Tool
& Twin
Blade Knife Set
Model No. SEA S01093 • Manufactured from heat treated and hardened Chrome Vanadium steel with a blackened finish. • Keys range in length from 75mm to 180mm and in size from 1.5mm to 10mm. • Ball-end allows key to drive fixing at up to 30°. • Contents: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm. • Supplied in easy-access case
hanging tag for safe storage and quick key selection. 9pc Long Ball-End Hex Key Set Model No. SEA AK651
5m(16ft) Heavy-Duty Tape Measure
Highly durable rubberised ABS body designed for rigorous work.
Fitted with 25mm wide nylon coated blade maximizing strength.
Metric/Imperial rule with 16" and 19.2" stud centre marking for framing work. Class II accuracy.
Features double edged end hook designed to grab on top or bottom for versatility. Cushioned grip for added comfort.
• Fitted with powerful double magnets, lanyard and belt clip.
9pc Anti-Slip Long Ball-End Hex Key Set
3m(10ft) x 16mm Metric/Imperial Tape Measure
5m(16ft) x 19mm Metric/Imperial Tape Measure
• Manufactured from hardened and heat treated Chrome Vanadium steel with a fully polished finish.
• Keys range in length from 65mm to 175mm and in size from 1.5mm to 10mm.
• Colour-coded anti-slip coating for comfort, control and fast identification.
• Supplied in easy-access case for safe storage and quick key selection.
Model No. SEA AK7190
• High-visibility composite case with rubber cover, wrist strap and belt clip.
• Steel blade with Metric and Imperial scale and magnetic tip.
• Strong rewind mechanism with slide-button lock plus side and base mounted push-button locks for added versatility.
Model No. SEA AK988
Cassette Lighter Gas Torch
• Ingenious design converts standard lighter into piezoelectric soldering torch.
• Produces flame of approximately 1300°C.
• Suitable for a variety of general-purpose uses from soft soldering to lighting the barbecue.
Professional Soldering
Model No. SEA AK404
• High-visibility composite case with rubber cover, wrist strap and belt clip.
• Steel blade with Metric and Imperial scale and magnetic tip.
• Strong rewind mechanism with slide-button lock plus side and base mounted push-button locks for added versatility.
Model No. SEA AK989
100W Soldering
• Class 1 electrically insulated soldering iron with cool grip handle which stays comfortable during prolonged use.
• Fitted with replaceable soldering tip.
Model No. SEA SD100
38 HAND TOOLS
• Includes 1.5m cable with 3-pin plug. • Complies with Low Voltage Directive and Electromagnetic Compatibility Directives.
Iron Model No. SEA SD150 • Ideal for awkward jobs where a third hand is needed. • Cast steel base for extra stability. • Fitted with two fully articulated crocodile clamps and Ø60mm magnifying glass. Mini Robot Soldering Stand with Magnifier Model No. SEA SD250K • 30/100W Dual powered pistol type soldering gun. • Boost trigger function to increase temperature. • Fitted with 1.5m cable and 3-pin plug. • Includes soldering wire, solder sucker, workpiece stand and metal soldering iron stand. • Supplied in rigid storage case.
Kit Model No. SEA SD300K • Comprehensive kit comprising 100W soldering gun, 30W soldering iron, iron holder, excess solder extractor, scraper, spare tips, solder wire and universal workpiece clamps. • Fitted with 3-pin plugs. 8pc Soldering Gun/Iron Kit Model No. SEA SMT5H
1/4"Sq Drive Super Stubby
Ratchet Wrench
Ultra-compact air ratchet wrench fits in the palm of the hand.
Perfect for working around tightly-packed engine compartments.
• Hardened steel anvil and twist-reverse mechanism.
• Rear exhaust with baffle reduces noise.
• Overall Length: 127mm.
Model No. SEA SA230
1/2"Sq Drive Air Ratchet Wrench
290mm Air Blow Gun Palm Type with
Air Inlet
• Features twist-reverse action and trigger operated power control.
• Hardened gear and yoke assembly ensures suitability for the professional workshop.
• Composite cover moulded around lightweight aluminium alloy housing reduces effects of chill on operator’s hands and provides added control.
• Air motor with quality bearings for smooth and powerful operation.
• Exhaust outlet adjusts 360°, keeping airflow away from operator.
Model No. SEA SA608
Die-cast metal body with moulded handle and hanging point.
• Palm type gun with thumb trigger control.
• Length of Lance: 290mm.
• Air Inlet Size: 1/4"BSP.
• Maximum Operating Pressure: 110psi.
Model No. SEA SA913L
Ø75mm Air Cut-Off Tool
Air Blow Gun Palm Type with 1/4"BSP Air Inlet and Safety Nozzle
• Die-cast metal body with moulded handle and hanging point.
• Palm type gun with thumb trigger control.
Supplied with jet and safety nozzle.
Maximum Operating Pressure: 110psi.
Model No. SEA SA913
• Includes a set of five chisels and a spare chisel retaining spring.
• Supplied in storage case.
• Chisel Shank Size: .401" Parker Taper.
Air Inlet Size: 1/4"BSP.
Model
• Powerful Generation Series air cut-off tool.
• Contoured handle insulates user from chill and vibration.
• Metal disc guard and rear air exhaust can be rotated 360°, giving operator added protection.
• Throttle safety device prevents accidental operation.
• Ideal for cutting exhaust brackets.
Model No. SEA GSA25
Reciprocating
39 AIR POWER TOOLS
Air
1/4"BSP
No. SEA SA12/S
Air Supply: 90psi - 4cfm. Weight: 1.2kg. Medium Stroke Air Hammer Kit Model No. SEA GSA21KIT • Soft grip handle for comfort and control. • Adjustable exhaust outlet for control of exhaust direction. • Supplied with WallDrive ® impact sockets, extension bars and driver bits.
1/2"Sq Drive Air Ratchet
Wrench Kit Model No. SEA GSA674K • Generation Series 90° Air Angle Die Grinder (Model No. GSA674). • Safety trigger prevents inadvertent operation. • Contoured rubber handle for reducing vibration and added comfort. • Includes a range of die grinding points, sanding rolls and Ø50/75mm preparation pads. • Replacement components readily available. 42pc Air Angle Die Grinding/Sanding Kit Model No. SEA SA34 • Suitable for a variety of bodyshop applications such as cutting through panels, sills and chassis members. • Excellent for initial crash-repair preparation when quick removal of damaged panels is required. • Fitted with safety trigger device. • Supplied with a starter pack of blades. • Air Supply: 90psi - 6cfm.
Air Saw
Heavy-duty alloy bevel gear head with composite body casing.
Heavy-duty 1000W motor develops powerful 11000rpm (no-load speed).
Features spindle lock for fast loading/unloading of discs.
• Supplied with side handle, guard and spanner.
• Fitted 3m power cable with Schuko plug.
Grinding disc not included,
Model No.
Model No.
53pc 3.6V Cordless Screwdriver Set
• Composite housing with comfortable handle and trigger feed control.
• Fitted with 1.1m cable and 3-pin plug.
Suitable for hardwoods, softwoods, plastics and other
materials.
Includes two glue sticks.
Power Tool Storage Rack
Model No.
AK292
• 2-Step switch for temperature and airflow control.
• Gun can also stand vertically.
• Suitable for paint stripping, soft soldering, removing sticky labels and defrosting frozen pipes.
Fitted with 3-pin plug.
available
Range:
Model No. SEA HS105
• Powerful, lightweight screwdriver featuring locking swivel adjustment from pistol to straight type.
• Forward, reverse and trigger-lock control.
• Eight adjustable torque settings. Quick release 6mm bit holder. Integral LED light to illuminate working area. LED Torch in base of handle. Three LEDs indicate battery life. Powered by a Lithium-ion battery which has no memory effect, longer lasting than Ni-Cd cells and recovers from a deep discharge state without affecting overall capacity.
Contents: Screwdriver Bits; Slotted - 3(x2), 4(x2), 5(x2), 6mm(x2), Phillips - #1(x5), #2(x5), #3(x4), Pozi - #1(x4), #2(x4), #3(x4), TRX-Star* - T8(x2), T10(x2), T15(x2), T20, T25, T27, T30, T40, T45, Hex - 3(x2), 4(x2), 5mm(x2), Magnetic Bit Holder.
• Wall mounting rack specifically designed for the storage of power tools.
• Stores up to five power tools.
• Shelf space for power tool battery chargers.
• Open fronted bays make tools easily accessible.
• Supplied flat-packed.
Model No.
PTSR5
Model
40 ELECTRIC POWER TOOLS/STORAGE AND WORKSTATIONS
SEA SG125EU
•
order
PTC/125G. Ø125mm Angle Grinder 1000W with
SEA
•
similar
•
40W Electric Glue Gun - 230V
Nozzles
separately. Temperature
375°C/500°C. 1600W Hot Air Gun 375°C/500°C
SEA
No. SEA SKC45 • Seamless steel construction with durable coating for corrosion resistance. • Fitted with high quality cam type lock and supplied with two keys. • Piano hinged door with catch plate gives added security. • Supplied with a pack of colour-coded key tags. • Includes mounting screws and wall plugs. • Size (W x D x H): 240 x 80 x 300mm. Key Cabinet with 45 Key Tags Model No. SEA S0765 Wall-mounting quality composite pegboard. Supplied with an 18pc assorted hook set. Additional hook assortment available, Model No. S0766. 2pc Composite Pegboard Set Model No. SEA APDC18R • Tough and durable housing, contains 18 impact resistant composite drawers. • Ideal for storing a mixture of small to large fixings and components. • Fitted with four fixing points for wall mounting or can be bench mounted (freestanding). • Overall Size (W x D x H): 380 x 160 x 475mm. 18 Drawer Cabinet Box - Red/Black Model No. SEA TPS131 • Bins manufactured from shockproof polymer which is resistant to mild acids, solvents and oils. • Bins have a high thermal stability and resist damage from extremes of temperature. • Bin Dimensions (W x D x H): Medium (x12); 100 x 160 x 75mm, Large (x12); 100 x 210 x 75mm. • Steel Panel Dimensions (W x D x H): 630 x 10 x 380mm. • Supplied with heavy-duty steel back panel. 24 Bin & Panel Combination Model No. SEA CP36S
•
Motorcycle Chain Breaker &
•
Short-Arm Threaded Nut Riveter
1L Motorcycle Portable Fuel Tank
item,
1L tank, 950mm hose, two hose clamps and on/off tap.
• For dual entry carburettor systems, use the Model No. MS029DCK
Feed Lines.
• Suitable for E10 petrol.
Heavy-Duty Compact Riveter with Collection Bowl
• Industrial grade tool for use in garages, agriculture and general workshops.
• Short-arm design providing effortless functionality and access to restricted space to set rivets up to 6.4mm.
• Supplied with five interchangeable colour-coded nozzles for all popular rivet sizes.
• Accepts aluminium, steel and stainless steel rivets in the following sizes: Metric; 2.4, 3.2, 4, 4.8, 6.4mm, Imperial; 3/32", 1/8", 5/32", 3/16", 1/4".
• Features special profile nozzle for structural rivets and a built-in mandrel collector.
41 MOTORCYCLE TOOLS/BODYSHOP Model No. SEA VS1807 • Moulded protectors with connecting cord. • Designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres with tyre levers. 2pc Rim Protector Model No. SEA VS779 Breaks and rejoins most types of chain quickly and easily. Suitable for most sizes of drive or cam chain from #25 to #520. • Supplied with a range of pins, dies and detailed instructions.
Riveter Model No. SEA VS0201 • Composite collection bottle with magnetic locating pad. • Capacity: 100ml. • Supplied with tube and connectors. Brake Bleeder Set with Container Model No. SEA MS160 14/16mm Double end, traditional style, long reach spark plug box spanner with L-bar. Length: 180mm. 14/16mm Double End Long Reach Spark Plug Box Spanner with L-Bar Model No. SEA MS161 • 18/21mm Double end, traditional style, long reach spark plug box spanner with L-bar. • Length: 175mm. 18/21mm Double End Long Reach Spark Plug Box Spanner with L-Bar Model No. SEA MS029 • Must have
when needing to remove fuel tank to perform maintenance on your motorcycle. • Eliminates need to balance fuel tank in an awkward position. • Simply remove your tank, connect the auxiliary fuel tank, which is gravity fed, and hang it up using the hook provided. • Features
Fuel
Model No. SEA AK3984
Suitable for rivet nuts in aluminium, steel and stainless steel.
Short-arms provide effortless functionality and access to restricted spaces.
Model No. SEA AK3982
Underseal Gun with Canister & Extension
Air Operated Underbody Coating Gun
Model
Tyre
•
Plastic Riveting
Model
Model
Air Operated Underbody Coating Gun
Model
Paint Thickness Gauge
Model
3pc
42 BODYSHOP
No. SEA SG139 • Accepts most popular types of 1L coating tins. • Air Pressure: 90psi. • Air Consumption: 10cfm. • Air Inlet Size: 1/4"BSP.
No. SEA SG14 • Professional coating gun suitable for automotive and general industrial applications. • Accepts most popular types of 1L coating tin. • Supplied with extended flexible nozzle for wax spraying cavities. • Air Inlet Size: 1/4"BSP. • Air Supply: 90psi(8cfm).
No. SEA SG19 • Suitable for most brands of wax rust inhibitor. • Supplied with nozzle for surface application and 910mm flexible probe for cavities.
Probe
No. SEA RT001 • Suitable for applying plastic rivets found in automotive applications. • Designed for one-handed operation and one-stroke setting. • Allows access in hard-to-reach areas not accessible by conventional lever type tools. • Universal nose piece suitable for all sizes of plastic rivets. • Rivets: Ø6.6 x 17.2mm (x10), Ø6.3 x 25.2mm (x10), Ø5 x 15.8mm (x10), Ø5 x 17.2mm (x10).
Kit
No. SEA TA091 • Ideal for the showroom, bodyshop and valeting bay to accurately verify the thickness of paint and check for accident damage.
Uses magnetic induction to provide accurate and consistent readings to 0.1mm. • Suitable for iron, steel and aluminium with non-magnetic coatings including paint, enamel, plastic and epoxy. • Displays measurement in mm. • Graduations/Range: 0.1mm/0-2mm. • Powered by CR2032 3V battery (supplied).
Model No. SEA AK5225 • Manufactured from composite material. • Suitable for the application of body filler. • Widths: 100, 125, 150mm.
Body Filler Applicator Set Model No. SEA SA302 • Die-cast body and dial gauge with rubber protector. • Fitted with single clip-on connector. • Supplied with quick coupling. • Range: 0-12bar(0-175psi).
Inflator with Gauge Model No. SEA SA334 • Die-cast metal body with moulded handle and hanging point. • Fitted with short type nozzle. • Maximum Operating Pressure: 110psi. Air Blow Gun with 1/4"BSP Air Inlet Model No. SEA AK39602 • Drop-forged frame with patented folding mechanism for compact storage. • Comfortable cushion grips. • Heavy-duty head suitable for fixing blind rivets and threaded nut rivets to thin sheet material. • Suitable for aluminium, steel and stainless steel. Rivet & Threaded Nut Rivet Kit
40pc Tap & Die Set Split Dies
High carbon steel taps and dies. Dies with machined lead-ins for
Set includes one long handled adjustable tap wrench with professional type sliding
Steel die holder with retention screw,
dies from
to
• Also includes T-Bar type tap wrench, screwdriver and thread gauge.
Model
45pc Tap & Die Set Split Dies
40pc Tap & Die Set Split Dies
• Ideal for the engineer and farmer. Complete range of Metric Tungsten taps and dies, 6mm up to 24mm. Includes Tap Wrench, T-Bar Tap Wrench and Steel Die Wrench.
• Supplied in heavy-duty storage case.
Model
• Professional split dies with machined lead-ins for ease of use.
• Die holder features self-centring mechanism for straight and accurate thread cutting.
• Includes T-handled tap wrench and Metric screw pitch gauge.
Sizes:
Model
3pc T-Handle Tap Wrench Set
Vernier Caliper
3pc Micrometer Set
43 MACHINE SHOP
No. SEA AK301
ease of use.
jaw.
suitable for
M3 up
M12.
No. SEA AK303
No. SEA AK3040
•
3-12mm.
Model No. SEA AK3076 • Contents: Taps & Dies; Coarse - 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 4.5 x 0.75, 5 x 0.8, 6 x 1, 8 x 1.25, 10 x 1.5, 12 x 1.75mm, Fine - 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x 0.5, 6 x 0.75, 8 x 1, 10 x 1.25, 12 x 1.25mm, Taper & Plug Tap & Die; 1/8"BSP, HSS Drill Bits; 1.7, 2.5, 2.6, 2.9, 3.3, 3.5, 3.8, 4.2, 4.5, 5, 5.3, 6.8, 7, 8.5, 8.8, 10.3, 10.7mm, Tap Wrench, T-Bar Tap Wrench, Die Holder, Thread Gauge, Screwdriver. 76pc Tap & Die Set Split Dies Model No. SEA AK727 • Professional style steel tap wrench with sliding jaws. • Suitable for tap sizes between M3 and M12. 200mm Tap Wrench Model No. SEA AK9799 • General-purpose tap wrenches for tapping and reaming. • Solid jaw design and heavy knurled cap. • Maximum Square Size; Small Wrench - 3.9mm, Medium Wrench - 5mm, Large Wrench - 7mm. • Supplied in pouch.
Model No. SEA AK962 • Traditional pattern stainless steel vernier caliper with exterior/interior measurement and depth gauge. • Accurate to 0.02mm or 1/1000". • Supplied in storage case. 150mm(6") Vernier Caliper Model No. SEA AK962EV 11mm LCD display. Hardened and tempered stainless steel with satin finish. Metric and Imperial readings with conversion between the two. Zero setting control for comparative measurement. • Supplied in storage case. 0-150mm(0-6") Digital
Model No. SEA AK9651M • Set includes three external micrometers ranging from 0-75mm. • Supplied with extension sets and adjusting wrench.
154mm Carbide Tipped Scriber
Dial
Benchtop Drill Bit Sharpener
4pc Nut Splitter Set
150mm
44 MACHINE SHOP Model No. SEA AK6095 • Adjustable, machined stainless steel blade with zinc alloy head. • Head fitted with scriber, level vial and brass locking screw. • Permanently marked with Metric and Imperial graduations. • Suitable for woodworking trades. 300mm Combination Square Model No. SEA AK960 Precision ground base with rotary magnetic control. Articulated arm with rotary lock. Combination dial and scribing clamp with fine adjustment control. Heavy-Duty Magnetic Stand without Indicator Model No. SEA AK961M Precision mechanism with Ø58mm dial and locking, rotating bezel. Interchangeable foot. Fitted with mounting lug.
Gauge Indicator 10mm Travel Model No. SEA AK9751 Precision manufactured tool with hardened steel tips. • Features straight and 90° tips with knurled body. 190mm Double End Engineer’s Scriber Model No. SEA AK9752 • Fitted with pocket-clip. • Suitable for use on glass, metals and ceramics. • Ideal for machinists, welders, tinsmiths and hobbyists.
Model No. SEA CV150XT • Super quality cast iron construction. • Replaceable steel jaws. • Features an anvil. • 2 Year guarantee* against breakage. • Jaw Opening: 150mm.
Heavy-Duty Professional Cast Iron Fixed Base Vice Model No. SEA AK85 • Hardened steel blades and forged grips, this comprehensive set is ideal for removing stubborn/seized nuts. • Capacity: 9-12, 12-16, 16-22, 22-27mm.
Model No. SEA SMS2008 No-Load Speed: 4200rpm. Fast, simple and effective way to sharpen your drill bits. Gives a perfect angle/sharpened head to make drilling with your bit easier. Suitable for up to 118° HSS Titanium, Cobalt, Carbon Steel and Split Point bits in range Ø3-13mm.
Model No. SEA AK63 Steel pins with holder. Quickly gauges profiles. Integral Metric and Imperial rules. Suitable for flooring, tiling, woodworking and plumbing. Profile Gauge
3pc Miniature
52pc Screw Pitch Gauge
45 MACHINE SHOP Model No. SEA AK9791 • Composite stocked brush set with hanging holes. • Steel, nylon and brass filled heads. • Suitable for cleaning spark plugs and smaller engineering components. 3pc Miniature Brush Set Model No. SEA AK9801 • Composite handles with hanging holes. • Small and medium (35 and 90mm headed) brass filled brushes, for components such as glow/spark plugs and contacts, and a large steel filled brush (90mm head) for removal of rust and welding slag. 3pc Auto Engineer’s Wire Brush Set Model No. SEA WB02 • Wooden stocked brush with steel fill. • Suitable for general-purpose applications. Engineer’s Wire Brush with Steel Fill Model No. SEA WB05/R • Brassed steel filaments. • Curved, folded, alloy stock with composite handle. Brassed Steel Wire Brush Model No. SEA WB05Y • Stainless steel filaments. • Curved, folded alloy stock with composite handle. Stainless Steel Wire Brush - Plastic Handle Model No. SEA WB100 • Composite stocked brush set with contoured soft grip handles. • Stainless steel, nylon and brass filled heads suitable for cleaning spark plugs and smaller engineering components. • Includes hanging hole.
Wire Brush Set Model No. SEA AK71SPG • Folding 20 blade set, individually stamped with accurate thread profiles. • Range: 0.4-6mm. 20pc Screw Pitch Gauge Set Model No. SEA AK73SPG • Folding 52 blade set, individually stamped with accurate thread profiles. • Range: 4-62 BSW/0.25-6mm.
Set BSW/Metric Model No. SEA AK577 • Popular sized diamond needle files. • Vinyl dipped handle shafts for extra comfort. • Contents: Flat Parallel, Flat Taper, Half-Round, 3-Square, Square Form, Round Form, Oval Form, Knife Form, Crossing File, Barrette File. • Average Overall Length: 140mm. 10pc Diamond Needle File Set
66mm Long, high carbon steel
tempered and chemically blackened.
set of alpha-numeric characters
the ampers
symbol (number 6
as number
8mm Character height.
in
case.
Jockey
Heavy-duty
40L Heavy-Duty Flexi Tub - Black
590mm Folding Shovel
•
• Manufactured from heavy-duty polyethylene with a versatile, flexible construction.
• Fitted with strong carry-handles tested to a breaking strain of 350kg.
• Ideal for a wide range of domestic and industrial applications.
Model No. SEA SFT40B
24"(600mm) Rubber Floor Squeegee with Aluminium Handle
• Manufactured with a strong nylon handle and solid carbon steel head, powder coated for resistance to corrosion.
• Ideal for use in adverse weather conditions.
•
• Heavy-duty 1220mm aluminium handle and galvanized steel frame with 24"(600mm) rubber blade.
• Suitable for oil, water and other liquid spills.
be used inside or outside.
Model
• Universal fitting Ø50mm tow-ball
•
• Lightweight and durable design featuring twist-and-tighten locking system for easy assembly.
• Supplied in pouch for easy storage.
Towing Mirror Extension
Model
• Convex towing mirror offers a wider field of vision while towing caravans or trailers.
• Universal fit will clip onto most wing mirrors.
• Easy to adjust, both horizontally and vertically.
• It is a legal requirement to fit an extension mirror when a caravan or trailer obstructs the towing vehicle’s vision.
• Full EU approval.
Tow Pole with Shock Spring 2000kg Rolling Load Capacity
• 2000Kg rolling capacity tow bar ideal for the safe secure towing of motor vehicles.
• Connects to car towing eyes with secure attachment hooks.
• Tow pole has a damping spring to mitigate shock from acceleration or braking.
• Pole easily adjusted to match the towing eye orientation of both towed and towing vehicle.
• Breaks down for easy storage and is supplied with storage bag.
46 MACHINE SHOP/JANITORIAL Model No. SEA BM12S • Soft bristle broom. • Fitted with handle support bracket. • Ideal for indoor or outdoor use. 12"(300mm) Broom Soft Bristle
No. SEA BM24RSM
Can
No. SEA SS03
Model No. SEA TB37
jockey wheel with Ø50mm clamp. 200mm Steel wheel with solid rubber tyre. Zinc plated for corrosion resistance.
Wheel & Ø50mm Clamp Ø200mm Solid Wheel Model No. SEA TB45
trailer hitch lock.
12mm Steel bar and cast steel body helps protect against trailer and caravan theft.
Easy to install and remove.
Supplied with three keys.
Ø50mm
Tow-Ball Trailer Hitch Lock
Model
No. SEA TB63
Model No. SEA TPK2522
punches. Hardened,
Full
including
and
doubles
9). •
• Supplied
composite
36pc 8mm Letter & Number Punch Set Model No. Punch Length SEA AK9296 4mm SEA AK8297 8mm
•
•
Can
Model
50mm x 3m Steel Wheel Car Transporter Ratchet Tie Down
Breaking Strength
Aqua Flexi-Blade
• Manufactured from polyester webbing with stitched reinforcement around hooks.
Suitable for securing cars on transporters using wheel strap, which slides on to the main tie down.
Features wheel choker with ‘O’ ring for use with steel wheels.
A double-locking, short narrow handle ratchet ensures there is no risk of disengagement or tension loss until the handle is released.
Webbing Length: 3m.
• Cross Strap Length: 320mm.
Model No.
Cut & Impact Resistant Gloves
• Cuts drying time in half.
• Removes excess water prior to chamoising.
• Blade Length: 300mm.
Auto Darkening Welding Helmet
BS EN 166 BT 3 - Manufactured from polycarbonate for superior durability and resistance. Offers full face protection with an increased range of mobility compared to a standard face protector. Curved face shield conforms to the shape of the face offering improved protection. Detachable indirect vented goggles to allow for extra versatility.
• Features a wide-angle curved lens for enhanced visibility.
• Adjustable headband with soft PVC frame provides added comfort.
Adjustable Arm Safety
Model
• Durable HPPE knitting provides cut resistance to level C.
• Anti-slip coating on the palm of the glove to give greater control to use in wet or oily environments. Additional reinforcement at thumb crotch for enhanced protection.
Impact resistant TPR material to back of the glove to help protect knuckles, fingers and thumbs during use.
Conforms to BS EN ISO 21420:2020 & EN388:2016 + A1:2018.
Performance Levels - 4X43CP.
Safety Spectacles with EVA Padding Clear Lens
High quality infinitely variable shade 9-13 lens manufactured and tested to BS EN 379.
Fully automatic switching from light to dark on striking arc.
Features infinitely adjustable sensitivity and delay switches.
Grinding function enables user to grind without removing mask.
Deluxe contoured helmet approved to BS EN 175 which gives full neck protection and protects lens from scratching when helmet is laid down.
• Comfortable headband and non-slip quick release ratchet mechanism.
• Suitable for MIG, TIG, arc and gas welding.
BS
length
a
Modern, lightweight wraparound design, with flexible TPR arms, offers added protection and increased user comfort.
Polycarbonate anti-scratch lens. Includes foam lining to keep wind, dust and other irritants away from eyes.
• Conforms to CE standardsBS EN 166/F.
Model
for hands,
all types of
47 JANITORIAL/SAFETY
No. SEA TB4/5LED
Composite 4ft board fitted with 5m of 7-core cable and 12V 7-pin N-type plug.
Includes two E-Mark approved triangle reflectors and two 5-function SMD LED rear square clusters (Stop/Tail/Indicator/Numberplate Illumination/Reflector).
easily adapt to 13-pin using Model No. TB44.
SEA TDRWS
4500kg
Model
No. SEA CC65
Model No. SEA PWH601
Shade 9-13 Model No. SEA SSP44
EN 166/F - Wraparound, clear, anti-scratch, polycarbonate lens. Adjustable
nylon arms for
snug fit.
Spectacles
No. SEA SSP68
No. SEA SSP76
Safety
Goggles with Detachable Face Shield
Model No.
SEA SSP38L
Large - Pair Model No. SEA SSP41 • Protection
wrists and forearms. • Suitable for
shot/grit blasters.
585mm Shot Blasting
Gauntlets - Pair 12V 4ft LED Trailer Board
No.
DB03
Ø10mm Arc Pointed Nose Tungsten Carbide Rotary Burr
Ø10mm Cylindrical Front End Cut Tungsten Carbide Rotary Burr
Ø10mm Cylindrical Ball Nose Tungsten Carbide Rotary Burr
• ØØ10mm Burr made from Tungsten Carbide.
• Arc Pointed Nose No. 6 cut (universal).
For use on soft and hard metals, including welded seams.
• Supplied in a plastic storage box.
Model No.
SDB03
Ø10mm Conical Ball Nose Tungsten Carbide Rotary Burr
Ø10mm Burr made from Tungsten Carbide.
Cylindrical front end No. 6 cut (universal).
For use on soft and hard metals, including welded seams.
Supplied in a plastic storage box.
Model No.
SDB01
Ø10mm Oval Tungsten Carbide Rotary Burr
• Ø10mm Burr made from Tungsten Carbide.
Ball nose No. 6 cut (universal).
For use on soft and hard metals, including welded seams.
Supplied in a plastic storage box.
Model No.
SDB02
Ø10mm Arc Round Nose Tungsten Carbide Rotary Burr
• Ø10mm Burr made from Tungsten Carbide.
• Conical ball nose No. 6 cut (universal).
• For use on soft and hard metals, including welded seams.
• Supplied in a plastic
box.
Model No.
• Ø10mm Burr made from Tungsten Carbide.
• Oval head No. 6 cut (universal).
• For use on soft and hard metals, including welded seams.
• Supplied in a plastic storage box.
Model No.
SDB04
Ø10mm Burr made from Tungsten Carbide.
• Arc round nose No. 6 cut (universal).
• For use on soft and hard metals, including welded seams.
• Supplied in a plastic storage box.
Model No.
SDB05
49 POWER TOOL ACCESSORIES
SEA
•
•
•
•
SEA
•
•
•
SEA
•
SEA
SEA
SEA SDB06
storage
Model
SEA
• Designed to clean internal pipe ends quickly and safely. • Manufactured with alloy steel cutters to remove damaged metal and burrs. • Features a 1/4"Hex shank for use with a drill or hex driver. • Applicable for use on pieces from Ø3mm to 18mm in diameter. • Suitable for use with a variety of compounds including stainless steel, hardened steel, mild steel, copper, brass, plastic and many more. Ø3-18mm Internal Deburring/Chamfer Tool Model No. SEA SA35/B80G Aluminium oxide, super-flexible belts for Sealey and other belt sanders. • Supplied in a pack of five. 80Grit Sanding Belt 10 x 330mm Pack of 5 Model No. SEA SA95/PX • Suitable for use with Model No. SA95, for removing pinstripes or double-sided tape from panel work prior to refinishing. Ø88 x 16mm Stripe Removing Pad
50 POWER TOOL ACCESSORIES Model No. SEA BWBS03 • Suitable for use with power tools up to the maximum rated speed (4500rpm). • Shaft: Ø6mm. • Contents: Brushes; Ø50mm Wire Cup, Ø50mm Flat Wire, Ø25mm Decarbonising/Cleaning Wire. • Crimped brassed steel filaments add extra rigidity and cleaning power. 3pc Wire Brush Set Model No. SEA SA695WA Angled wire wheel for Model No. SA695 Smart Eraser Kit. Ø100mm Angled Wire Wheel for SA695 Model No. SEA SCB75 • Suitable for use with power drills. • Ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. Ø75mm Wire Cup Brush with 6mm Shaft Model No. SEA SFB100 • Suitable for use with power drills. Ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. Ø100mm Flat Wire Brush with 6mm Shaft Model No. SEA SFB50 • Suitable for use with power drills. Ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. Ø50mm Flat Wire Brush with 6mm Shaft Model No. SEA SFB75 Suitable for use with power drills. Ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power. Ø75mm Flat Wire Brush with 6mm Shaft Model No. SEA TKCB100 • Suitable for use with power tools up to the maximum rated rpm. • Twisted steel filaments give more aggressive cleaning actionideal for heavy rust removal. Ø100mm Twist Knot Wire Cup Brush M14 x 2mm Model No. SEA TKCB65 • Suitable for use with power tools up to the maximum rated rpm. • Twisted steel filaments give more aggressive cleaning actionideal for heavy rust removal. Ø65mm Twist Knot Wire Cup Brush M10 x 1.5mm Model No. SEA TKCB651 • Suitable for use with power tools up to the maximum rated rpm. • Twisted steel filaments give more aggressive cleaning actionideal for heavy rust removal. Ø65mm Twist Knot Wire Cup Brush M14 x 2mm
250pc Diesel Injector
51 CONSUMABLES Model No. SEA AB066STBK Self tapping screw assortment. Black flanged. • BS 4174. • Contents (Approximate Quantity): Diameter x Length; 3.5 x 10 (x160), 3.5 x 19 (x160), 4.2 x 13 (x160), 4.2 x 19 (x60), 4.2 x 25 (x30), 4.8 x 13 (x30), 4.8 x 16 (x30), 4.8 x 19 (x30), 4.8 x 25mm (x40). 700pc Self Tapping Flanged Head Screw Assortment Model No. SEA AB001SP Contents (Approximate Quantity): 1/16" x 1" (1.6 x 25.4mm) (x150), 3/32" x 1" (2.4 x 25.4mm) (x150), 3/32" x 1-1/2" (2.4 x 38mm) (x100), 1/8" x 1-1/4" (3.2 x 32mm) (x75), 1/8" x 2" (3.2 x 51mm) (x50), 5/32" x 2-1/2" (4 x 63mm) (x30). 555pc Split Pin Assortment Small Sizes Model No. SEA AB073TI • Splined and threaded rivet nut assortment. • Quantity: 200. • Supplied in a partitioned box. • Contents: Size (Approximate Quantity): M4 x 0.7 (x60), M5 x 0.8 (x40), M6 x 1 (x60), M8 x 1.25mm (x40). 200pc Splined Threaded Insert (Rivet Nut) Assortment M4-M8 Model No. SEA AB004OR Rubber O-ring assortment. Contents (Approximate Quantity): Ø3.5 x 1.7 (x20), 4.5 x 1.7 (x20), 5 x 1.7 (x20), 6 x 1.7 (x20), 7.5 x 1.7 (x20), 9 x 1.5 (x15), 9.5 x 2.5 (x15), 10.5 x 2.5 (x15), 12.5 x 2.5 (x10), 14 x 2.5 (x10), 15.5 x 2 (x10), 15.5 x 2.5 (x10), 17 x 2.5 (x10), 18.5 x 3.5 (x10), 19 x 2.5 (x10), 21 x 3.5mm (x10). 225pc Rubber O-Ring Assortment Model No. SEA AB020CW • Copper sealing washers assortment. • Contents (Approximate Quantity): ID x OD x Thickness; Ø5 x Ø9 x 1 (x20), 6 x 10 x 1 (x20), 6 x 12 x 1 (x20), 8 x 12 x 1 (x20), 8 x 14 x 1 (x20), 10 x 14 x 1 (x20), 10 x 16 x 1 (x20), 12 x 16 x 1.5 (x15), 12 x 18 x 1.5 (x15), 14 x 18 x 1.5 (x15), 14 x 20 x 1.5 (x15), 16 x 20 x 1.5 (x10), 16 x 22 x 1.5 (x10), 18 x 22 x 1.5 (x10), 18 x 24 x 1.5 (x10), 20 x 26 x 1.5mm (x10). 250pc Copper Sealing Washer Assortment Model No. SEA AB027CW Diesel injector copper washers assortment. • Contents (Approximate Quantity): ID x OD x Thickness; Ø6 x Ø10 x 1 (x20), 10 x 13.5 x 1 (x20), 10 x 20 x 1 (x20), 12 x 16 x 1.5 (x20), 14 x 18 x 1.5 (x20), 16 x 20 x 1.5 (x15), 21 x 25 x 1 (x10), 8 x 11.5 x 1 (x20), 10 x 14 x 1 (x20), 10 x 20 x 2 (x20), 12 x 18 x 1.5 (x20), 14 x 20 x 1.5 (x20), 17 x 21 x 1.5 (x15), 22 x 27 x 1mm (x10). • Supplied in partitioned box.
Copper Washer Assortment Model No. SEA BSL102 Fast and simple-to-use. Kit includes 56m of high quality stainless steel banding with a tensile strength of 420N/mm². Dispenser case also houses 150* clamp sets and unique pliers with integrated cutters and band tensioner. • Never be caught without the right sized boot clamp again. • * Approximate quantities Universal CVJ Boot Clamp Kit Model No. SEA CV96EU • Universal CVJ boot made from high quality neoprene material suitable for use with air operated boot installation tools. • Supplied with fitting kit including clips and cutting guide. • Suitable for most car and car-derived van applications. Ø56-116mm Universal Stretch CVJ Boot EU
52 CONSUMABLES Model No. SEA ACOR225 • Made from HNBR. • Designed for use with Freon R134a and R1234YF gas making them suitable for automotive air conditioning units and many other applications. • Contents: (Approximate Quantity) ID x Thickness; Ø3 x 1, 4 x 1, 4.5 x 2, 5 x 2, 6 x 2, 6 x 2.5, 6 x 3, 7 x 2, 8 x 2mm (20 of each), 9 x 2, 10 x 2, 12 x 3, 13 x 3, 14 x 2.5, 17 x 2.5, 18 x 4, 20 x 2, 22 x 2mm (5 of each). 225pc Air Conditioning Rubber O-Ring Assortment Model No. SEA BOR419 Contents: (Approximate Quantity) ID x Thickness; Ø18 x 3.5, 20 x 3.5, 22 x 3.5, 23.5 x 3.5, 25 x 3.5, 26.5 x 3.5, 28 x 3.5, 30 x 3.5, 31 x 3.5, 33 x 3.5, 34.5 x 3.5, 36 x 3.5, 38 x 3.5, 41 x 3.5, 44 x 3.5, 47 x 3.5, 50 x 3.5mm (10 of each), 11 x 2.5, 14 x 2.5, 19 x 2.5, 22 x 2.5mm (13 of each), 10 x 2.5, 13 x 2.5, 16 x 2.5, 18 x 2.5, 21 x 2.5mm (14 of each), 5 x 2mm (x18), 3 x 1.5, 4.4 x 2mm (20 of each), 7 x 1.5, 10 x 1.5, 13 x 1.5 (23 of each). 419pc Rubber O-Ring Assortment Ties manufactured from nylon 66 making them heat resistant over the temperature range -40°C to +85°C. • Supplied in handy sized packs. • Suitable for workshop, garden and home applications. 200 x 4.8mm White Cable Tie - Pack of 100 Model No. Size SEA CT20048P100W 200 x 4.8mm SEA CT30048P100W 300 x 4.8mm Model No. SEA AK867B100 • Blades suitable for use with Model No’s AK867, AK52504, AK52507 and VS500 and other leading brands of scraper. Razor Scraper Blade - Pack of 100 Model No. SEA AK86R/B • Suitable for use with Sealey and other brands of retractable snap-off knives. • Compatible with Model No’s AK86R, AK8610R and AK8605R. • Pack of 10 Snap-Off Blade - Pack of 10 Model No. SEA AB010DS Bonded seals (Dowty Seals) assortment. Contents (Approximate Quantity): M18 (x8), M20 (x5), M22 (x5), M24 (x5), M10 (x20), M12 (x15), M14 (x15), M16 (x15). 88pc Bonded Seals Assortment Model No. SEA AB011DS • Bonded seals (Dowty Seals) assortment. • Contents (Approximate Quantity): Ø1/8" (x20), 1/4" (x15), 3/8" (x15), 1/2" (x10), 5/8" (x8), 3/4" (x8), 1" (x8). • Supplied in partitioned box. 84pc Bonded Seal Assortment - BSP Model No. SEA CV001 • Drop-forged, 8-point, steel impact socket designed for the removal of front hub nut found on Scania trucks. 80mm Front Hub Nut Socket - Scania 3/4"Sq Drive Model No. SEA CV002 • Designed to rotate crankshaft on DAF commercial vehicles via flywheel ring gear. 1/2"Sq Drive Crankshaft Rotator - DAF
53 CONSUMABLES Model No. SEA BCF100 • Contents (Approximate Quantity): 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A (10 of each). • Automotive MINI blade type fuse assortment. 100pc Automotive MINI Blade Fuse Assortment Model No. SEA BCF120 • Contents (Approximate Quantity): 3A, 5A, 7.5A, 15A, 20A, 30A (15 of each), 10A (x30). • Supplied in storage case. 120pc Automotive Standard Blade Fuse Assortment Model No. SEA BCF36 • Automotive MAXI blade type fuse assortment. • Contents (Approximate Quantity): 20A, 30A, 40A, 50A (6 of each), 60A, 70A, 80A, 100A (3 of each). • Supplied in partitioned box. 36pc Automotive MAXI Blade Fuse Assortment Model No. SEA BTQK12 • Copper-zinc plated steel and brass. • RoHS Compliant. • Cable Size: 25mm². • Post Size (Positive/Negative): Ø19mm/Ø17.5mm. • Blue and red. • Enables quick release. Quick Release Positive-Negative Battery Clamps - Pair Model No. SEA CFT1 • Checks continuity of blade-type automotive fuses, in or out of fuse holder. • Green LED indicates fuse is OK. • Also simplifies the removal of faulty fuses. Automotive Fuse Checker & Puller Model No. SEA FH30 Fuse holder for standard blade type up to 30A. Pack of 10. 30A Standard Blade Fuse HolderPack of 10 60A Splash-proof MAXI Blade Fuse Holder Pack of 2 Model No. Type Rating SEA FHMSP20 Mini 20A SEA FHSP20 Standard 20A SEA FHSP30 Standard 30A SEA FHMAXSP60 Maxi 60A Model No. SEA FHMSP20 Model No. SEA FHSP30 Model No. SEA FHMAXSP60 Model No. SEA SW20 • Tube of flux-cored lead-free wire for general-purpose soldering. • Size: 10g. Lead-Free Soldering Wire Dispenser Tube Packs of 100 tubeless snap-in type tyre valves. Manufactured from EDPM rubber which prevents dry rot and wear. Snap-in Tubeless Tyre Valves Packs of 100 Model No. Tyre Valve SEA TV413 TR13 SEA TV414 TR14
100pc
180pc
&
Shrink
Lengths: 50, 100mm.
Size (Approximate Quantity) - 50mm: Ø3.2 (x60),
95pc
54 CONSUMABLES • Thin wall heat shrink tubes. • RoHS compliant. • Shrink Ratio: 2:1. • Length: 100mm. • Size (Approximate Quantity): Ø3.2 (x30), Ø4.8 (x40), Ø6.4 (x10), Ø9.5 (x10), Ø12.7mm (x5).
100mm Heat Shrink Tubing Assortment • Thin wall heat shrink tubes. • RoHS compliant. • Shrink Ratio: 2:1. • Length: 200mm. • Size (Approximate Quantity): Ø3.2 (x30), Ø4.8 (x30), Ø6.4 (x20), Ø9.5 (x10), Ø12.7mm (x10). • Supplied in a pack.
200mm Heat Shrink Tubing Model No. Colour SEA HST200B Black SEA HST200BR Black & Red SEA HST200MC Mixed Colours Model No. Colour SEA HST100B Black SEA HST100BR Black & Red SEA HST100MC Mixed Colours Model No. Colour SEA HST501B Black SEA HST501MC Mixed Colours • Thin wall heat shrink tubes. • RoHS compliant. •
Ratio: 2:1. •
•
Ø4.8 (x40), Ø6.4mm (x20). • Size (Approximate Quantity) - 100mm: Ø3.2 (x30), Ø4.8 (x20), Ø6.4mm (x10). • Supplied in partitioned box.
50
100mm Heat Shrink Tubing Assortments Model No. SEA SSCSET1 • Designed for applications when a waterproof joint is required. • Suitable for cable sizes from 0.5mm² to 1.5mm². • Kit contains male and female housing, terminals and seals. • Waterproof to IP65. • Contents: 1-Way Female Connector (x6), 1-Way Male Connector (x6), 2-Way Female Connector (x6), 2-Way Male Connector (x6), 3-Way Female Connector (x4), 3-Way Male Connector (x4), 4-Way Female Connector (x4), 4-Way Male Connector (x4), 5-Way Female Connector (x3), 5-Way Male Connector (x3), 6-Way Female Connector (x2), 6-Way Male Connector (x2), Rubber Seal (x100), Female Pin (x100), Male Pin (x100). 350pc Superseal Male & Female Connector Assortment Model No. SEA HST4812 • Thin wall heat shrink tube. • RoHS compliant. • Shrink Ratio: 2:1. • Colour: Black. • Tube Length: 12m. • Supplied in a dispenser. 12m Ø4.8-2.4mm Black Heat Shrink Tubing Model No. SEA HST6412 • Thin wall heat shrink tube. • RoHS compliant. • Shrink Ratio: 2:1. • Colour: Black. • Tube Length: 12m. • Supplied in a dispenser. 12m Ø4.8-2.4mm Black Heat Shrink Tubing Model No. SEA HST9508 • Thin wall heat shrink tube. • RoHS compliant. • Shrink Ratio: 2:1. • Colour: Black. • Tube Length: 8m. • Supplied in a dispenser. 8m Ø9.5-4.8mm Black Heat Shrink Tubing
9pc Pure Bristle Paint Brush Set
Pure bristles with square cut ends, held by chrome ferrules.
• Painted composite handles.
• Sizes: 1 x 12, 3 x 25, 3 x 38,
x 50mm.
Parts Cleaning Brush
Double end cleaning brush with solvent resistant bristles. Suitable for all types of water-soluble degreasing solvents.
excellent for applying oils when drilling and machining.
5m Black Silicone Repair Tape
• Self-fusing silicone.
• Non-adhesive.
• Flexible between -50°C to +260°C.
• Neaten up lines and extension cords in stowage.
• Wrap hydraulic fittings and other exposed metal connections to help prevent corrosion.
• Works even over wet, dirty, or oily surfaces.
• Wrap it around anything that you want to secure, and it will never leave any sticky residue.
• RoHS Compliant.
• Not to be used with Petrol, Diesel or Brake Fluid.
Model No. SEA ST5B
19mm
Insulating Tape
• RoHS Compliant insulating
Thickness: 0.15mm.
Elongation: 125%.
Tensile Strength: 22N/100mm.
Temperature Rating:
to 150°C.
Self-extinguishing.
Parts Cleaning Brush with Hose
• Fits onto the flexible spout of Sealey parts cleaning tanks (except SM21)
allows a stream of fluid to pass through the bristles for extra cleaning power.
• Supplied with hose, adaptor nipple and two hose clips.
Model No. SEA SM201
19mm x 15m Fleece Tape - Black
Model
19mm x 20m Black PVC Insulating Tape
Pack of
• RoHS Compliant insulating tape.
• Thickness: 0.15mm.
• Elongation: 125%.
• Tensile Strength: 22N/100mm.
Temperature Rating: -18°C to 150°C. Self-extinguishing.
48mm
Silver Duct Tape
Model No.
ITBLK10
25kg Shot Blasting Grit - Bag
25kg Shot Blasting Grit
55 CONSUMABLES
2
Also
and
SEA
•
-
10
No. SEA ITMIX10
tape. •
•
•
•
-18°C
•
x 20m PVC
Mixed Colours - Pack of 10 Model No. SEA B/25KG • Suitable for workshop, handheld and recirculating shot blasters. • Complies with COSHH SI-1657-1988. • Not suitable for use in shot blasting cabinets.
Model No. SEA BGT25KG • Suitable for workshop, handheld and recirculating shot blasters and complies with COSHH SI-1657-1988. • Packaged to last, the composite tub with carry handle helps keep the grit less susceptible to moisture, debris and is easier to manoeuvre. • Not suitable for use in shot blasting cabinets.
• Silver gloss finish. • Adheres immediately and reliably. • Easy to unwind and tear by hand. • Provides a moisture resistant seal.
x 50m
Model No. Colour SEA DTS Silver SEA DTB Black Model No. SEA FT01 • Fleece tape ideal for keeping wire bundles neat and tidy on vehicles or machinery in the workplace. • Features of the fleece tape include noise damping, abrasion resistance and bundling strength, all whilst keeping wire bundles flexible.
8W COB & 1W SMD LED Rechargeable Inspection Light
• Smooth 90° flex with additional 360° twist function.
• Super bright 8W COB LED provides up to 1000 lumens output with 120° spread of light.
• Includes an additional high power 1W LED directional torch.
• Swivel hanging hook and rubber covered magnet on the base.
• Two 2.6Ah Lithium-ion batteries for longer life.
• Type-C charging port.
• Supplied with Type-C USB cable.
• Operating Time Side(High/Low)/Top: (2/4)/16hr.
• Charging Time: 5hr.
Model No. SEA LED1001
12 SMD & 1W SMD LED Rechargeable Slim Inspection Light
• Slimline foldout inspection light for use in confined spaces, with 6mm minimum thickness.
• Inspection arm can be rotated 180° and folded back for use as a hands-free inspection light.
• 12 SMD LEDs which produce up to 400 lumens, operated by a rolling dimmer switch.
• 1W SMD LED in the end for use as a directional torch.
• Suitable for hands-free operation with three magnets and a hanging hook.
• Folds away, small and compact, suitable for keeping in your pocket.
• 3.7V 2Ah rechargeable Lithium-ion battery.
Supplied with USB charging lead. Operating Time: Inspection Light (400lm); 3hr, Directional Torch; 8hr. Charging Time: 3hr.
Model No.
SEA LED180
• Unique and innovative 360° swivel and tilt function enables the light source to be positioned in any direction.
• Exclusive patented design owned and registered to Sealey.
• 14 Super bright SMD LEDs providing up to 600 lumens output with 120° spread of light, illuminating the whole work area.
• Includes an additional high power 3W LED directional torch.
• Features two swivel hooks and three rubber covered magnets, two on the rear and one on the end, which allow hands-free operation.
• High quality 2.6Ah Lithium-ion battery for longer life, no memory effect and a much slower discharge than traditional Ni-MH batteries.
• Micro USB charging port and is supplied with charging cable.
• Operating Time Side(High/Low)/Top: (3/6)/8hr.
• Charging Time: 3.5hr.
• Min./Max. Length: 260/280mm.
3W COB & 1 SMD LED Rechargeable Aluminium Pocket Light with UV
Model No. SEA LED360
of Acument
are registered
• Powerful 3W COB with 1 x SMD and 2 x UV SMD.
• USB rechargeable Lithium-ion battery with small green/red charging indicator light. Made from aluminium, anodized and finished with rubber coating for a more premium feel.
A strong magnet in the pocket/belt clip allows for hands-free use as well as a second strong magnet in the base.
Two longwave UV-A SMDs at 390-400nm. Lumen Output: 220lm.
• Battery: 3.7V 2200mAh.
• Charging Time: 3hr.
Model No. SEA LED220UV
and TORX PLUS
fasteners respectively. TORX
and TORX PLUS
tools are suitable for driving
and
are given in good faith but may change without notice and do not form any part of a sale contract, E & OE.
this
360° 14 SMD LED & 3W SMD LED Lithium-ion Rechargeable Inspection Light
LIGHTING Model No. Colour SEA LED3601G Green SEA LED3601R Red Lampa przenośna bezprzewodowa 3W COB & 1W SMD LED • Mini, lekkie lampy z unikalną i innowacyjną funkcją obrotu i pochylania o 360°. • 3W COB LED wytwarza do 300 lumenów z oceną CRI-80. • Czas pracy (bok/góra): 3/6 godz. • Czas ładowania: 3 godziny. Specifications and descriptions on
promotion
*TRX-STAR, TRX-TS
TRX-P
TORX ®
®
®
®
trademarks
Intellectual Properties, LLC. *Please refer to www.sealey.co.uk/guarantee for more information on guarantees Promotion valid from 1st October 2022 to 31st March 2023
