ipcm® Protective Coatings n. 40 - December 2021

Page 1

ISSN 2282-1767

Protective Coatings ®

ipcm_PC digital on www.myipcm.com

THE MAGAZINE ABOUT CORROSION CONTROL AND PREVENTION TECHNOLOGIES 2021 - 10th Year | Quarterly - N.40 December




in this issue 01 EDITOR’S LETTER

16

© Sika

02 BRAND NEW

© Adobe Stock

10 SUCCESS STORIES

Park Deck Flooring Supports Architecture

10

12 SUCCESS STORIES

Andamios Atlas S.A. de C.V. Chooses Nanogun Airspray Gun to Achieve a 40% Savings in Time and Paint Consumption

15 SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES 16 ANALYSIS

The Corrosion of the Morandi Bridge: The Story of a Predictable Collapse?

24

© Stockholms stad

30

© Adobe Stock

© Cortec

24 FOCUS ON TECHNOLOGY

The Unique Colour of Slussen’s Golden Bridge in Stockholm Was Developed at Teknos

40

28 INNOVATIONS: PRESENT&FUTURE

Easy Corrosion Solution for Post-Tension Grouting Delays

30 INNOVATIONS: PRESENT&FUTURE Advanced Zinc Technology for Extending the Lifetime of Metallic Assets

35 BRAND NEW 36 SUCCESS STORIES

Bridge Repairs Streamlined Thanks to Waterproofing with Polyurea

40 SUCCESS STORIES

MCI® Technology Applied on Peljesac Bridge Providing Road Link Between Two Parts of the Country

42 INSPECTION LOGBOOK

Coating Inspections - Inspection of Steel Surface Preparation, Part 5

44 BUSINESS CARDS 46 THE MARKETING CORNER

2022 Social Media Trends: Everything There is to Know

50 TRADE FAIRS & CONFERENCES 52 ZOOM ON EVENTS


Your annual by the industry for the industry wind energy event

Find out more at: windeurope.org/annual2022

EVENT AMBASSADORS:

NATIONAL PARTNER:

To become an exhibitor or sponsor please contact: sales@windeurope.org

REGIONAL PARTNERS:


The right choice in corrosion protection Corrosion can cause serious issues. Preventing corrosion, and protecting products, surfaces and structures from the damage it can cause is easy – but only if you know the right combination of coatings to choose. That’s where we come in. Interpon Redox takes the complicated science and makes it simple. It comprises a portfolio of tough and durable multi-layer powder systems to suit the widest range of substrates and applications, while our simple ‘System Finder’ helps you find the perfect combination for your particular project and deliver the ultimate corrosion protection. With thousands of colors to choose from, and the largest range of Ready to Ship products available, we’ve got the winning formula of colors, textures and finishes to ensure you remain unbeatable. Ready. Steady. Coat.

industrial.interpon.com


EDITOR’S LETTER

I

t has only been two years since 2019, but it feels like we have experienced a time jump that nullified one of them. Yet, we have lived through both 2020 and 2021, albeit for most of the time without certainties and above all without making plans and with only limited

visibility of the future, including the immediate future. Such lack of planning, together with the fluctuation of raw material prices, the demand for just-in-time rather than just-in-case production, the crisis in maritime transport with the shortage of containers and skyrocketing container prices, and the spread of Industry 4.0, is reinforcing a trend that had already emerged before the pandemic: that of re-shoring, i.e. the return to local manufacturing, in which companies enhance the value of their country (or continent) of origin by bringing back to it economic activities that had been transferred outside its borders. The continuing pandemic and macroeconomic instability are changing the pattern of the global value chain. This is the opposite of delocalisation – going local instead of going global. “According to experts at A.T. Kearney, one of the world’s leading consultancy firms, the digital revolution is fostering re-shoring. Companies that want to reach the highest technological levels do not need cheap labour specialising in single operations (essential elements of assembly lines), but they rather look for qualified and competent personnel […]. It is about bringing back the highest value-added productions, focusing on quality and not quantity, while continuing to work for the whole world.1” This editor’s letter, which is too brief to go into such vast topics destined to affect the whole world’s economy, is only intended to provide some food for thought. 2022 is fast approaching. It is impossible to make predictions, because there are still too many elements in play to determine what it will be like in terms of economy and if the positive parameters recorded since the beginning of the summer will be confirmed. Going back to the reality of this year-end issue of ipcm®_Protective Coatings, the reports and articles you will find in it makes it one of the most important and rich in content of the year 2021. It features a comprehensive special about protective technologies for bridges and infrastructures with plenty of technical hints to design the measures for corrosion prevention in multiphase and extensive projects as the design and construction of bridges and highways are. From an article by Stefano Cingolati, a professional journalist specialising in foreign policy and economics, in Il Foglio, 17-18 April 2021 (my translation).

1

Alessia Venturi Editor-in-chief

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

01


BRAND-NEW

Cortec’s Biobased Rust Preventative VpCI-277 Preserves Metals During Storage and Transport © Cortec

The new rust preventative launched by Cortec saves time and reduces the use of additional materials.

C

ortec has announced that it has recently developed the new ready to use rust preventative VpCI®-277.

Specifically designed to preserve metals during storage and transportation, the product combines film-forming additives with Vapour phase Corrosion Inhibitors in order to provide multi-metal corrosion protection. It can provide corrosion protection for up to two years of indoor storage or during shipments when combined with VpCI packaging materials, leaving a dry and non-tacky film on the metal surface. Cortec’s new solution contains a biobased corrosion inhibitor in a non-flammable and low VOC solvent carrier, so it can assist for example automotive manufacturers that need rust preventatives with drier films and low VOCs to meet their solvent-based specifications. The rust preventative VpCI-277 is also suitable for robotic assembly of precision components

© Cortec

which require tight tolerances, helping to maintain a clean preservation process through the absence of oily residue. Moreover, it does not contain chlorinated compounds, chromates or nitrites. It can be applied by spray or dip and left on metal parts during further processing or shipment, not requiring removal. Usually, rust preventatives need to be applied and removed several times because the metals risk flash corrosion when sitting in temporary storage. Furthermore, the parts have to be washed before entering the next phase of the manufacturing process. VpCI-277 allows to streamline processes by eliminating steps, improving tact time and reducing the use of additional materials and cost. VpCI®-277 conforms to ASTM D1748 (Humidity), ASTM D1735 (Water Fog), MIL-C-83993 (Water Displacement), and NACE RP0487-2000 (Selection of Rust Preventives) standard test methods.

© Cortec

02

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings

For further information: www.cortecvci.com


BRAND-NEW

Sherwin-Williams’ FIRETEX FX6002 To Be Applied on the Y-Towers The intumescent coating developed by Sherwin-Williams will offer fire protection to Amsterdam’s tallest buildings.

T

he intumescent coating FIRETEX® FX6002 developed by

exposure, backlog and time delays associated with application on-site.

Sherwin-Williams, winner of the 2021 Queen’s Award for Enterprise:

Through our partnership with Sherwin-Williams, the FX6002 system can

Innovation, has been selected as part of a system that will maximise

be fully applied at the paint shop and moved on site and installed within

fire protection for a major residential and hotel development project in

one day, enabling the construction to move at a quicker pace with fewer

northern Amsterdam. The Y-Towers are two 100m-high towers under

bottlenecks,” stated the General Manager of Maeg Costruzioni SpA Alessio

construction in the Overhoeks district. After completion, expected by

Ortolan, the steel fabricator for the construction works. “As a result, the

2023, they will become the tallest buildings in the Dutch capital. The tallest

quick curing of FX6002 should lead to less damage to the steel when

one will host the Maritim Hotel Amsterdam, that includes 579 rooms, a

moved, as we know beams will be fully cured when lifted on-site.”

Skybar, conference centre and a events space, while the second tower will

“This project demanded the highest specification standards for skyscraper

house almost 300 residential apartments.

buildings. FX6002 is helping fabricators across Europe to offer high-quality

FIRETEX FX6002 results particularly suitable for this project, as it can

passive fire protection, while also reducing bottlenecks and project costs.

be applied off-site and enables operators to transport steelwork in few

We are proud to have been involved to ensure the highest level of fire

hours, rather than days. In addition, it can be applied direct to metal

protection measures are in place where the lives of people and safety of

without the need for a primer or topcoat in some environments while

property are at stake,” commented Valter Volta, Sherwin-Williams Regional

retaining the highest levels of durability: up to 120 minutes of fire

Sales Manager for South East Europe. Sherwin-Williams’ fire protection

protection and long-term corrosion protection.

coatings have been also used in other construction projects in Europe

To increase fire protection, Sherwin-Williams will also provide the epoxy

and Asia, such as The Shard and the Leadenhall Building in London, as

blast primer FIRETEX C69, the methacrylate intumescent coating FIRETEX

well as Azerbaijan’s Flame Towers.

FX6002 and a topcoat of Acrolon™ 7300 polyurethane. “For the Y Towers project, a just-in-time delivery method requires beams

For further information:

to be delivered after they are coated off-site. This will help to reduce the

https://pages.s-w.com/FX6002-gb-en.html

© Sherwin-Williams

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

03


BRAND-NEW

© Matthias_Ibeler

BASF Signs a Wind Power Supply Agreement with Ørsted BASF and Ørsted have concluded a 25-year fixed-price corporate power purchase agreement (CPPA), under which BASF will offtake the output of 186 megawatts from Ørsted’s planned Borkum Riffgrund 3 Offshore Wind Farm in the German North Sea.

B

ASF has signed a power purchase agreement with Ørsted that

a zero bid. This was made possible by several cost-drivers, including

will help the company cover the increased electricity needs of

the installation of next-generation wind turbine technology, very

low-emission technologies. It also represents a step towards BASF’s

favourable site conditions and high wind speeds, and anticipated

ambition of becoming carbon neutral by 2050.

revenue-stabilising power purchase agreements with industrial

“This supply agreement with Ørsted is another important step in

partners such as BASF.

securing additional renewable energy for BASF,” says Dr. Martin

“In the common fight against climate change, it’s partners like BASF

Brudermüller, Chairman of the Board of Executive Directors of

that will make the difference. The chemical sector has a challenging

BASF SE. “BASF wants to reduce its CO2 emissions by 25% by 2030

path towards decarbonisation, but it will also make one of the biggest

compared with 2018. To achieve this ambitious goal, we will have

contributions. For this reason, countries like Germany must respond

to replace large amounts of fossil energy with renewable energy

to the enormous demand for renewable electricity by urgently making

within the coming years. Ørsted can provide the required additional

more seabed available for offshore wind projects and by increasing its

quantities through the construction of new wind farms to support us

ambitions for deploying large-scale renewable energy sources such

in our energy transformation.”

as offshore wind power. Offshore wind in the North Sea and the Baltic

Ørsted’s offshore wind farm – for which the company has recently

Sea is an abundant source of green electricity that can be unleashed

secured planning approval from the German Federal Maritime and

through clearer and more ambitious policies. With our vision of a

Hydrographic Agency (BSH) – will have a total installed capacity of 900

world that runs entirely on green energy, we aim to further accelerate

megawatts and go into full commercial operation in 2025.

the build out of renewable energy and support partners like BASF in

As the agreement will run for 25 years, it is the longest CPPA for

realising their climate ambitions”, says Mads Nipper, CEO of Ørsted.

offshore wind ever announced and an important step in enabling

04

Ørsted to take final investment decision on Borkum Riffgrund 3,

The path towards decarbonisation

which is expected towards the end of 2021. Borkum Riffgrund 3 was

BASF is working on scaling up low-emission technologies to industrial

the world’s first large-scale offshore wind farm to be awarded with

dimensions.

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


BRAND-NEW

On this path, beyond 2030 BASF expects to implement technologies such as CO2-free methods

for the production of hydrogen and electrically heated steam crackers, which will significantly increase BASF’s demand for renewable power.

Ørsted is also pursuing ambitious decarbonisation goals. More than ten years ago, the company started its own transformation, from being one of the most coal-intensive energy companies to being the most sustainable energy company in the world. Ørsted has the target and plan of becoming carbon-neutral in its energy generation by 2025 and of reaching full value chain decarbonisation by 2040, as the world’s first energy company with scientifically validated plans. By 2030, Ørsted aims to have installed 50 gigawatts of renewable energy capacity. Of this, 30 gigawatts will be offshore wind power. For further information: www.basf.com

About Ørsted Ørsted AS (formerly DONG Energy) is a Danish multinational power company based in Fredericia (Denmark) which develops, constructs, and operates offshore and onshore wind farms, solar farms, energy storage facilities, and bioenergy plants. It employs 6,672 people and is the largest energy company in Denmark. The company adopted its current name on 6 November 2017 in honour of the Danish scientist Hans Christian Ørsted who discovered electromagnetism and laid the foundation for the modern generation of electricity, which is at the core of Ørsted’s business. As of 2020, the company is the world’s largest developer of offshore wind power, accounting for 29% of global installed capacity and producing 88% of their energy from renewable sources. With its vision of a world that runs entirely on green energy, the company has a goal of net zero generation by the year 2025 and no carbon emissions by 2040. Ørsted ranks as the world’s most sustainable energy company in Corporate Knights’ 2021 index of the Global 100 most sustainable corporations in the world, and is recognised on the CDP Climate Change A List as a global leader on climate action.


BRAND-NEW

U.S. Government to Fund Corrosion and Biofouling Research for Marine Energy Devices The Office of Technology Transitions is funding research to optimise non-toxic coatings for control of biofouling and corrosion on marine energy devices and facilities.

T

he Office of Technology Transitions of the U.S. Department of Energy

blends of SLIC with solvents, curing agents, binders and pigments to

(DOE) is funding the Pacific Northwest National Laboratory (PNNL)

assess tensile strength, shelf life, cure time, and any impact on other

project to scale up, field test, and optimise the non-toxic, durable and

performance metrics.

convenient coatings for control of biofouling and corrosion on marine

The federal funding of $529,000 has been issued through the Technology

energy devices and facilities.

Commercialization Fund (TCF), a programme aiming at helping national

The project is based on a patented technology developed by the PNNL,

lab-based research and development projects on energy.

the Superhydrophobic Lubricant Infused Composite (SLIC), which provides

“President Biden is serious about making sure America corners the clean

antifouling performance and durability while decreasing hydrodynamic

energy market – and that means we need to work with our nation’s

drag without involving toxic materials. So, it can help to prevent biofouling

savviest entrepreneurs to fast-track solutions from DOE’s National Labs

of water power civil works in both freshwater and marine environments.

into commercial-ready technologies”, stated Jennifer Granholm, Secretary

The objectives of the research include a final laboratory-based

of Energy. “These projects will help us deploy game-changing innovations

performance test that will measure SLIC’s saltwater-based durability,

that position us to win the clean energy race, while creating jobs and

friction and compatibility with other paint and primer types. Researchers

opportunity across every pocket of the country”.

will collaborate with experts from the coatings industry (such as from BioBlend Renewable Resources, Dry Surface Technologies, Prometheus

For further information:

Innovations and Lorama Group, as well as PNNL’s Marine and Coastal

https://www.energy.gov/technologytransitions/ and www.pnnl.gov

Research Laboratory and Taylor Shellfish Farms), in order to co-develop

© Shutterstock

06

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


© Titantec

h

BRAND-NEW

TITANTECH Presents Its New Catalogue of High-performance Anti-corrosion and PFP Coatings TITANTECH has presented a new catalogue of coatings for corrosion and fire protection of metal structures, floors and wooden surfaces.

I

n the “catalogues” section of TITANTECH website, the new coating

• coating systems: TITANTECH, in addition to guaranteeing useful tools

brand of AkzoNobel, it is available a new online catalogue designed

for choosing the most suitable paints for each intervention or situation,

to provide a consultation tool to professionals who are searching for

offers also the possibility of obtaining up to 120 certified coating

the best coating solutions for corrosion and fire protection of metal

systems based on ISO 12944;

structures, wooden floors and surfaces in industrial environments or

• the list of defects with causes and TITANTECH solutions, accompanied

with high technical or hygienic requirements.

by photos and detailed technical and practical explanations;

This new publication, however, it is not simply a catalogue, rather it is a

• the glossary: a dictionary, complete with information and technical data

guide that allows to consult the most suitable solutions of anticorrosive

to understand the characteristics and performance of the paints.

primers and enamels, floor and intumescent coatings, as well as paints, lacquers and solvents for wood.

The new catalogue of TITANTECH’s coatings business line represents a

It is also possible to access additional technical information such as, for

guide and a working tool containing a renewed and wide assortment of

example:

high-quality paints, specifically designed to structures and capital goods.

• regulations and certifications: TITANTECH coatings comply with

It offers optimal and innovative solutions with certified products and

regulations and certifications related to protection of steel structures,

coating systems that meet the needs of the most demanding customers.

flooring and passive fire protection according to ISO 12944, to reaction to fire according to EN 13501-1 and to the slip and fire resistance of structures according to EN 13381-8;

For further information: www.titantech.es/catalogos

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

07


BRAND-NEW

© Boeing

Savroc and Boeing: Partnering for a Sustainable Aerospace Manufacturing Savroc and Boeing have signed a Purchase Contract to partner on the use of TripleHard® chromium coating technology.

S

avroc Ltd and Boeing have signed a Purchase Contract to collaborate

we can collectively deliver on our commitment to climate action

on the use of TripleHard® technology, a non-toxic trivalent

and sustainable aerospace.” “We are proud to partner with Boeing

hard chromium coating developed by Savroc. This coating is more

to enhance our mission of providing technology-based solutions to

environmentally friendly than many other protective coatings commonly

customer needs while being responsible for the environment,” said

used in the aerospace industry.

Osmo Jahkola, Chief executive officer at Savroc. “Savroc and Boeing

This partnership underlines the industrial participation agreements

share a common pioneering spirit that focuses on a cleaner future by

that promote Finnish companies’ work packages that increase the

providing the right solutions today”.

competitive offering of Boeing products around the world, generating

Savroc Ltd is the pioneer of the trivalent hard chromium technology.

more and more economic benefits in Finland.

Savroc technology center is located in Kuopio, Finland. The center is

“Collaborating with Savroc underscores our shared mission to deliver

equipped with the latest technology for coating industry research &

unsurpassed product offerings that do right by our customers, our

development. In 2015 Savroc Ltd was selected as one of the 25 most

planet, and future generations,” said Maria Laine, vice president,

promising Nordic cleantech start-ups by Nordic Cleantech Open.

Business Development, Boeing Defence, Space & Security. “This partnership serves as a guidepost across the industry of how

08

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings

For further information: www.savroc.com


BRAND-NEW

Hempel Announces New Executive Group Management Hempel announced a new Executive Group Management that will lead the way to doubling the company’s revenue to 3 billion euros by 2025.

H

empel announced a new Executive Group Management to lead its growth journey and get

even closer to its customers. The new Executive Group Management replaces the former matrix structure with a two-tier leadership, including an Executive Management Board and an Operational Management Board. The new way of working gives Hempel a simpler organisational structure, with clearer roles and responsibilities, enabling future growth and closer alignment with customers. “I’m thrilled to announce today’s changes,” said Lars Petersson, Group President & CEO. “My new leadership team will lead a new way of working at Hempel - we have organised our business in an even more customer-focused structure, which will unleash potential and energy from the organisation to deliver on our Double Impact strategy.”

The new structure

© Hempel

Hempel’s commercial activities are now organised into key segments: • Marine, led by Executive Vice President, Alexander Enström; • Energy & Infrastructure, led by Executive Vice President, Michael Hansen; • Decorative, led by Executive Vice President, Joe Devitt. Chief Operations Officer and Executive Vice President, Katarina Lindström, now heads up Technology & Operations; Chief Financial Officer and Executive Vice President, Lars Dollerup now oversees Finance & Digital; and Chief People & Culture Officer and Executive Vice President, Pernille Fritz Vilhelmsen is at the helm of People & Culture. Strategy & Transformation is also joining the EGM, headed up by Vice President, René Overgaard Jensen. “A year into our Double Impact strategy and we’ve made great progress,” continues CEO, Lars Petersson. “We’re on track, but from hereon in, the mountain gets steeper and we have changed the way we work to enable

© Hempel

Lars Petersson, Group President & CEO of Hempel.

us to grow at a faster rate, and ready ourselves for scaling up the business with future acquisitions.” For further information: www.hempel.com

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

09


SUCCESS STORIES

Park Deck Flooring Supports Architecture The Lammermarkt Parking Garage’s floor in Leiden (Netherlands) was coated with the Sikafloor® MultiDur EB-14 AT park deck system, a 2k epoxy resin that was specifically developed by Sika for multi-storey and underground car parks.

L

eiden is a city of 124,000 inhabitants in the province of South

Goyen and Jan Steen. The historic centre of Leiden has many museums,

Holland, Netherlands. A university city since 1575, Leiden has been

shops, theatres and catering establishments. It is a pedestrian zone,

at the forefront of science in Europe for more than four centuries. It is

so there are no cars. The area is a favourite spot with visitors, and

a typical university city, with university buildings scattered throughout

wherever there are lots of visitors, there is a need for well-designed,

and a large international student body that gives the city a bustling,

efficient parking garage. The Lammermarkt car park has become a

lively and cosmopolitan atmosphere.

perfect solution by virtue of the unique and pleasant parking experience it provides. But what`s behind the project?

The city of Leiden Many important scientific discoveries have been made here and the

New underground parking spaces

city is home to the oldest university in the Netherlands.

The Lammermarkt Parking Garage is one of two car parks located within

Leiden University is one of Europe’s top universities, with thirteen

walking distance of the city historic centre to provide parking space for

Nobel Prize winners to its name, and appears near the top of all

visitors. The new underground car park has 525 generous spaces and

international academic rankings. Leiden is a city with a rich cultural

eight charging stations for electric cars. Every floor has a certain number

heritage, not only in science, but also in the arts. One of the world’s

of disabled parking spaces.

most famous painters, Rembrandt, was born and educated in Leiden.

With a diameter of approximately 60 meters, it was necessary to

Other famous Leiden painters include Lucas van Leyden, Jan van

excavate more than 60,000 m3 of soil. A 5 km-long pressure pipeline was © Sika

10

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


SUCCESS STORIES

installed through the canal system in Leiden to transport the soil to a

and give the interior depth and colour.

ground depot outside the city, where the sand will be reused. This saved

The Sikafloor® MultiDur EB-14 AT park deck system was specified and

about 2,500 return trips by truck through the centre of Leiden.

applied by VLAQ Infra en Industrie B.V. together with the Sika flooring

The parking garage under the Lammermarkt was designed by JHK

team. This is a 2k epoxy resin that can achieve high wear resistance, an

Architects in collaboration with the Dura Vermeer - BESIX consortium.

even coating, low maintenance and a non-slip finish when dusted with

An underground architectural masterpiece, the design is an elegant

quartz sand, and can be applied with a 2-4 mm thickness.

combination of functionality and its mode of construction that respects

The car park has won the ESPA Gold Award. The ESPA (European

the heritage of its city centre surroundings.

Standard Parking Award) was instituted by the EPA (European Parking

The cylindrical shape of the garage is not only a sound basis for a

Association).

user-friendly parking garage, its compact volume also minimizes

The Gold Award is presented to garages that score very highly on safety,

interference with the historically important buildings surrounding it.

quality and customer-friendliness.

Achieving the visual effect of the parking space as designed required

In addition to the ESPA Gold Award, the garage was also awarded the

high-quality flooring and wall systems with tailored colour shades.

Rijnlandse Architectuurprijs 2017, a public award which is presented every two years to the best spatial design in the Leiden region, as well as

The Sikafloor® MultiDur EB-14 AT park deck system

the Betonprijs 2017 in the “Execution” category.

With clear signage and guidance, generous parking spaces and easy

Some reviews on Google say things like “Spacious parking garage” or

to find stairs and lifts, the Lammermarkt Parking Garage provides a

“This parking in central Leiden is very well done. We are so impressed”,

delightful parking experience.

so car drivers seem to be very satisfied with this new parking facility and

The traffic flow is well planned, with signs, arrows, icons and other

its easy to find parking spaces in an accessible location.

direction signage by the architect to ensure safety. The orange back wall on the parking levels and the orange floor edging in the central void reinforce the spatial character of the parking garage © Sika

For further information: www.sika.it

© Sika

© Sika

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

11


SUCCESS STORIES

Andamios Atlas S.A. de C.V. Chooses Nanogun Airspray Gun to Achieve a 40% Savings in Time and Paint Consumption Andamios Atlas S.A. de C.V. is specialising in safety in the construction field and works with the highest quality standards for its scaffolding systems. It has been able to achieve a 40% savings in time and paint consumption by choosing SAMES KREMLIN electrostatic spraying equipment.

I

n building construction, scaffolding is a temporary structure widely used

committee works constantly to offer innovative solutions to the

to elevate and support workers and materials during the construction,

construction sector and the finishing process.

maintenance, repair or cleaning of buildings, bridges and all other

“In our paintshop – continues Carrizales - degreasing, washing, and

structures. Scaffolds are essential to get access to heights and areas

surface preparation processes are carried out in paint booths and curing

that would be otherwise hard to get to. Tubular scaffolding of steel

oven in order to guarantee an even coating with optimum thickness and

or aluminium, that has largely replaced timber scaffolding on most

adhesion. Here we are able to treat from small pieces to components with

construction projects, can easily be erected in any shape, length, or

1600 x 1400 x 2800 mm dimensions and a weight up to 400 kg”.

height. Unfortunately, unsafe scaffolding has the potential to result in death or serious injury. This is the reason why the aim of Andamios Atlas

The Nanogun experience

S.A. de C.V., located in Tlalnepantla de Baz (Mexico) and specialising in

When it came to choose the most suitable application solution to its

manufacturing and selling architectural and structural metallic scaffolds, is

production, Andamios Atlas asked SAMES KREMLIN team to show its best

the safety in the construction industry.

equipment, and it suggested the Nanogun Airspray gun.

“For more than 50 years our company has been supporting the

“The Nanogun Airspray is specially designed for spraying liquid solvent-

Mexican construction industry in keeping workers and materials in safe

based materials at low pressures – says Thomas Comandone, Business

conditions”- says Carlos Raul Carrizales, Production Manager at Andamios

Line Manager for Electrostatic liquid range at SAMES KREMLIN. Its

Atlas S.A. de C.V.. “This means paying a great attention to the highest

lightweight and its ergonomic design make it the best choice for

quality standards in manufacturing our scaffolding systems. And quality

the operators to improve their comfort. Its high transfer efficiency

means perfect coverage of the paint to prevent any corrosion over time:

and optimum coverage for outstanding finishing application make it

the quality and performance of the spraying equipment is thus a major

unsurpassed in paint savings”.

concern for us”.

“This gun really helped us a lot in saving paint and which proved to be very easy to handle for our painters” – says Carrizales. “The electrostatic

About Andamios Atlas S.A. de C.V.

Nanogun met our needs since it was installed and the technical support

Andamios Atlas S.A. de C.V. started operations in 1965 and has

was very good. They explained us all functionalities since the installation,

consolidated as the biggest leader in scaffolding rental and sales in the

all the manipulation and how to use the equipment, and gave us specific

national and international markets.

trainings, instruction manuals and tips and tricks to improve the use of

“Our production capacity amounts to 26,000 tons of construction

the equipment and how to keep it in the best conditions. We began with a

equipment, and our products are divided in 7 ranges with the highest

new project and we noted 40% of reduction in production time and paint

safety, quality and technical standards in construction industry. This

consumption. We have achieved very significant paint savings and realised

throughput and our 16 divisions distributed over the Country allow us to

the real benefit of SAMES KREMLIN equipment”.

be involved in any building project. Our engineering department carries

The words of José Luis, coating specialist at Andamios Atlas, are also

out more than 100 monthly projects, and we maintain an average of

significant: “The gun is very easy to handle. The Nanogun is very

10,000 tons of equipment working on site per month, with approximately

lightweight, it is very easy to paint above and below without any problem.

100 daily operations nationwide”.

The flexibility of the hoses is also a plus. There is less wasted paint, a

Andamios Atlas S.A. de C.V. is committed to providing products and

better finish quality and the equipment performance is excellent”.

all-round services with technology, quality and prices that meet the requirements and expectations of their customers. Their new products

12

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings

For further information: www.sames-kremlin.com


SUCCESS STORIES

© SAMES KREMLIN

NANOGUN AIRSPRAY GUN FEATURES PERFORMANCE • Automatic control of high voltage to maintain constant paint charge for higher Transfer Efficiency • Optimal wrap-around and penetration effects for unrivalled paint savings with both high current and high voltage • High-quality coverage and regular thickness for outstanding finishing application • Wide range of viscosities to cover all product specifications at reduced costs.

PRODUCTIVITY • Air and paint flows easily adjustable with intuitive knobs • Spray change from flat to round type is fast and simple • High Voltage triggered when needle moves – no pressure sensor for higher safety • GNM 6080 control module provides smart diagnostics for improved maintenance • The lightest electrostatic gun of the market.

SUSTAINABILITY • Quick disconnect for enhanced maintenance • External paint circuit with simplified access for replacement • Coil fluid hose to allow safe application of metallic paints • Reduced Total Cost of Ownership with around 30% less wearable parts than market standards • Reliable quality of raw materials for tough use and long lifetime. © Andamios Atlas

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

13


&

M E R RY C H R I ST M A S &

W I S H YO U

HAPPY NE W YEAR


© Adobe Stock

SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

16

ANALYSIS

24

FOCUS ON TECHNOLOGY

28

INNOVATIONS:PRESENT&FUTURE

30

INNOVATIONS:PRESENT&FUTURE

35

BRAND NEW

36

SUCCESS STORIES

40

SUCCESS STORIES

The Corrosion of the Morandi Bridge: The Story of a Predictable Collapse?

The Unique Colour of Slussen’s Golden Bridge in Stockholm Was Developed at Teknos

Easy Corrosion Solution for Post-Tension Grouting Delays

Advanced Zinc Technology for Extending the Lifetime of Metallic Assets

Bridge Repairs Streamlined Thanks to Waterproofing with Polyurea

MCI® Technology Applied on Peljesac Bridge Providing Road Link Between Two Parts of the Country

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

15


© AdobeStock

ANALYSIS

SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

The Corrosion of the Morandi Bridge: The Story of a Predictable Collapse? Monica Fumagalli ipcm® Corrosion is present in our everyday lives more than we think. The progressive deterioration it causes can have devastating effects and weaken essential structures such as the metal reinforcements of bridges. In this article, we will try to understand if and how corrosion may have influenced the partial collapse of a bridge that first became a symbol of engineering innovation and then of an unforgettable tragedy: the Polcevera Viaduct, known to everyone as the Morandi Bridge.

T

he most famous bridges for their strength and durability have always

observed in structures made of this material have pushed people to

been the Roman ones: built in wood, stone, or concrete, many of

prefer other construction solutions. Let us see why.

them are still standing and still widely used.

Concrete, which is still widely used in construction nonetheless, has a

The Romans had particularly developed the masonry technique of using

strong compressive strength but it is weaker in terms of tensile strength.

concrete. However, since ancient times, the deterioration phenomena

Therefore, architectural structures made in this material are reinforced

16

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


ANALYSIS

with metal elements (the most common nowadays is steel) which

In the case of concrete’s reinforcements, the chemical attack triggering

are “embedded” in the concrete mass and called “reinforcements” or

corrosion occurs when the metallic elements bind with oxygen, water,

“reinforcing bars (rebars)”. Hence the name of “reinforced concrete” or

or other acids present in the environment, thus forming layers of ferric

“reinforced cement concrete”.

oxide and other substances that attack the metallic elements themselves

Reinforced concrete has good tensile strength and provides wall

to the point of weakening them over time. The process of iron oxidation

material with a long service life. However, it is heavy, it has poor thermal

thus occurs, resulting in the formation of the red-brown patina known

and acoustic insulation, it is sensitive to moisture, and it is prone to

as “rust”. Because of oxidation, iron expands, increasing its volume

degradation.

considerably and causing the expulsion of a 3-4 cm thick concrete

Furthermore, especially in past centuries and before the industrial

called “concrete cover” precisely because its function is to protect the

revolution at the end of the 19th century sanctioned its success with large-

metal reinforcements. Subsequently, this patina tends to flake off. This

scale production, one of the reasons why other materials were preferred

considerably diminishes the thickness of the rebars, which lose both their

to it was the chemical reaction called “carbonation”, caused by the contact

volume and their strength. This starts a slow process of degradation that

of cement with carbon dioxide and creating cracks into which moisture

leads to the weakening of the entire structure and, if action is not taken

and water can penetrate. These, in turn, affect the elastic properties of

quickly and effectively, to its collapse.

metal reinforcements, already burdened by the mechanical fatigue to

In order to compensate for the lack of tensile strength in reinforced

which they are subjected. The metal does not only lose its resistance

concrete, the use of so-called “pre-stressed reinforced concrete” became

and resilience, but it also expands; in some cases, the stresses resulting

widespread towards the end of the 19th century. Nowadays, this is

from such expansion break the concrete, thus considerably weakening

obtained by immersing a pre-stressed and tensioned metal reinforcement

the structure and leading to the possible collapse of portions or entire

made of steel strands, a set of six cables wrapped around a central one,

sections of bridges.

in the concrete mass. However, like the bridges’ support reinforcements,

In is also true that from the very beginning, irrespective of the

such strands, usually placed inside the tie rods that make up the

construction material chosen, bridges have always been subject to

anchoring system of pre-stressed concrete bridges, are also subject to the

collapses, in which the sudden lack of self-supporting capacity due

attack of corrosion. This can be avoided by coating the pre-stressed steel

to various reasons has resulted in a high number of casualties and

with suitable protective materials or by pouring concrete in-situ.

inestimable direct and collateral damage.

One of the first designers to make extensive use of this construction technique was engineer Riccardo Morandi, whose cable-stayed viaducts

Why do bridges collapse?

precisely feature tie rods made of pre-stressed reinforced concrete.

When the news about a bridge collapse spreads, the common feeling is that the event occurred suddenly and without any actual triggers.

The collapse of the Morandi Bridge

With the exception of collapses that are the consequence of natural

The partial collapse of the Morandi Bridge in Genoa on 14 August 2018,

phenomena such as earthquakes, floods, landslides, fires, or road or rail

which caused the death of 43 people, is still very much in the memory of

accidents, understanding the reason for the collapse of a bridge structure

Italians and many others.

is essential to prevent these exceptional events from happening again.

The cause is currently the subject of a judicial investigation, in which one

The most common causes are as follows:

of the first expert reports1 identified corrosion of the steel strands of the

• design defects

tie rods of pylon 9 of the bridge, the one that collapsed on 14 August,

• unsuitable construction material

as one of the possible reasons. In fact, the experts found “a generalised,

• lack of inspection and maintenance

long-term corrosive state [in the cables], due to the presence of water

• corrosion of metal reinforcements.

moisture and the simultaneous presence of aggressive elements such as sulphides and chlorides [...]. 68% of the strands in the primary group,

Over the past twenty years, about 130 bridges have collapsed worldwide

located inside the tie rod, and 85% of those located further out, showed

for a variety of reasons. How many cases were directly caused by the

a cross-section reduction of between 50% and 100%.” However, the

corrosion of metal reinforcements?

defence of ASPI-Autostrade per l’Italia, one of the companies sued as possibly responsible or jointly responsible for the collapse, stated that

Corrosion of metal reinforcements in reinforced concrete

“the corrosion percentages shown in the expert report’s table confirm

Corrosion is a natural and irreversible process that causes slow and

that the load-bearing capacity of the stays was amply guaranteed, as was

continuous wear of the metal in which it is triggered. If its action is not

also demonstrated by the analyses carried out by the Empa laboratory in

detected and therefore interrupted in time, this phenomenon leads to the inexorable decomposition of metal.

https://www.mit.gov.it/sites/default/files/media/notizia/2018-09/Comm_Isp_Mit%20Relaz_Viadotto_Polcevera_%20parte1.pdf 1

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

17


SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

© AdobeStock

The Roman Pont-Saint-Martin bridge in Aosta Valley (Italy) was built in the 1st century BC. It is considered one of the ancient largest bridges, and for over two thousand years it has been used for road traffic.

Zurich and the University of Pisa. Therefore, the possible presence of a

• the chemical and mechanical effects of weathering on concrete and

very small percentage of strands corroded by up to 100% can in no way

rebars.

have affected the overall strength of the bridge.”

A separate category includes some special phenomena such as the

It is not our task to go into the merits of the judicial process. What we

presence of diffuse cracks (wall cracks), due partly to the poor expansion

would like to analyse here is the influence that corrosion can have on the

of concrete compared to steel (when the latter is subjected to high

collapse of a monumental structure such as a motorway viaduct.

stresses), partly to vibrations caused by traffic, and partly to an uneven distribution of reinforcements within the concrete mass.”

The designer’s awareness The Polcevera Viaduct, inaugurated in July 1967 and now replaced by

The weak points of the Polcevera Viaduct

the new Saint George Bridge, was 1,102 m long and consisted of 11 bays

The Morandi Bridge was exposed to a high-salinity environment due to its

created by 12 pylons. Pylons 9, 10, and 11 overlooked the Polcevera

proximity to the sea and to polluting emissions from industrial activities

valley and were designed by Morandi as balanced systems, in which the

located in the area below. As a strategic motorway link between Northern

deck was supported by pre-stressed concrete tie rods, called stays, which

Italy and Southern France, it was crossed by an average of around 30

connected the deck itself to the top of the trestle masts, up to 50 metres

million vehicles a year3. Traffic volume – and the stresses it could generate

high from the bottom of the valley.

on the bridge’s structure – was considered an element to be monitored

Based on the report2 written by Morandi himself in 1979, i.e. twelve years

already in the 1979 report, which also noted a significant increase in

after the inauguration of the Polcevera Viaduct, and made public a few

vehicle traffic compared to that predicted in the design phase. Morandi

days after the collapse, the designer was aware of the weaknesses of

stated that such increase had caused the formation of some isolated rust

his work. He commented the slow deterioration of concrete as follows:

stains in places where, due to construction errors, the concrete cover’s

“As is well known, apart from possible problems due to specific static

thickness was lower than that calculated in the design phase. In fact, he

deficiencies, a reinforced concrete bridge is subject to slow deterioration

wrote, “it seems that the structure is lashed by sea winds (the sea is about

due to:

1 km away), which blow into the valley crossed by the viaduct. Therefore,

• the effect of moving loads and of environmental action, especially on

this stands in a highly saline atmosphere, with the wind also encountering

flooring, load-bearing structures, joints, and finishes;

a curtain of smoke from the steelworks’ chimneys on its route toward the This figure refers to a 2009 study by Autostrade per l’Italia on the Genoa Bypass, which found that the Polcevera Viaduct was crossed 25.5 million times a year, with an expected increase of around 30% over the next 30 years. https://cityrailways.com/articoli/gronda-2/

3 2

18

https://webapi.ingenio-web.it/immagini/file/byname?name=riccardo-morandi-durabilita-ponte-pp.pdf

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


ANALYSIS

viaduct and, therefore, being saturated with highly harmful vapours.” The first maintenance work “In the wall structure, apart from a few minor faults in the execution, which caused some rust stains to appear in isolated areas due to the insufficient end coverage of reinforcements, the project provided for the insertion of steel elements inside the concrete, except, of

iso 12944

course, for the cadmium-coated plates of the deck abutments. All these plates were literally corroded in just over 5 years by the extreme aggressiveness of the atmosphere and they had to be replaced with stainless steel elements in a rather complicated operation. We must think about what the maintenance costs would have been if a steelonly structure had been chosen instead of a reinforced concrete one, or at least if a solution had not been adopted with cables embedded in concrete shells under compression and, therefore, not subject to cracking. In addition, in recent years, the external surfaces of the structures and, in particular, of those exposed to the sea and attacked

extreme environments demand

superior protection a film galvanising system for off-shore, oil & gas underground pipelines before

drilling platform

after

more directly by acid fumes from the industrial chimneys are beginning to show the signs of an aggression of chemical origin. This is obviously due to the formation of soluble salts resulting from the combination of the acids in the fumes with the free lime in the concrete (carbonation, ed.): the well-known loss of chemical resistance of the concrete itself. I believe that sooner or later, probably within a few years, it will be necessary to resort to a treatment consisting of removing all traces of rust on the exposed parts of the metal rebars, coating the damaged parts with epoxy resins, and covering the entire structure with elastomers featuring high chemical resistance.”

egYpt: The General Petroleum Company

romania: OMV Petrom

pipelines

ship loaders

thailand: IRPC Petrochemical Complex

togo: Phosphate Mine Offshore Charging

immersed pier legs

sea BuoYs

ireland: Killybegs Pier

uruguaY: Armada Buoy

Internal strain Since then, the history of the Morandi Bridge has been dotted with complex and frequent maintenance operations. From the outset, the difficulties associated with the impossibility of visually inspecting the steel cables inside the concrete-coated tie rods were stressed by several parties. However, in spite of this difficulty, the designer himself reiterated the need for a total retrofitting work, even in the years following his first reports on the viaduct’s state of deterioration. In 1981, he wrote about the tied rods, warning of the “need for a close, ‘hands-on’ check of the steel by X-ray inspection.” During one of the most extensive maintenance operations on one of the tie rods on the north side of pylon 11, carried out in 1992 with the addition of external cables, a construction defect was detected that could affect the tightness of the tie rods themselves. This is what the person in charge of the project, engineer Gabriele Camomilla, said in an interview4 with the Ingenio magazine a few days after the bridge inspections, even at the top of the pylons 90 metres above the ground. https://www.ingenio-web.it/20939-ing-camomilla-come-e-perche-intervenimmo-sugli-strallidella-pila-11-del-ponte-morandi-nel-1992

4

www.zinga.eu

OFF_MEI2015_EN

collapse. “The bridge was the subject of very careful and constant

zingametall bvba Sprl industriepark rozenstraat 4 9810 eke (Belgium)

t. +32 9 385 68 81 info@zinga.be www.zinga.eu


SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

© AdobeStock

Corrosion of metal reinforcements is one of the most common causes of bridge collapses.

During one of these checks, we discovered that, on the last portion of a

external deformation of the cables. It worked with a modem connected

stay, at the top of the structure of pylon 11, [...] the concrete had left a

to a computer and it measured the voltage intensity of the cables

portion of steel uncovered and this had led to corrosion by dissolution

themselves.” The sensor actually operated from 1992 to 1996 and,

of approximately 30% of the strands. It should be emphasised that the

once detection stopped, it was never replaced. The inspection tools

stresses to which the stay-bearing steel was subjected (about 7,000 kg)

available in the 1990s are certainly not comparable to those of today.

were far less than the resistance capacities of its constituent material

Nonetheless, the need to install a monitoring system, however simple,

(15,000 kg).

indicates that there were doubts about the stays’ resistance already at

“The construction defect was as follows: the very high-strength cables

the time.

should have been spaced so that they would all be encased in concrete,

In their report on the collapse, the experts confirmed that “the cause of

which provides steel structures with considerable corrosion protection;

the collapse of the Morandi Bridge is the corrosion to which the upper

due to a construction defect, however, all of the stays were packed at the

part of the southern tie rod on the Genoa side of pylon 9 was subjected.

top, so they were not well encased in concrete. This allowed part of the

Such corrosion process began in the early years of the bridge’s life

air to pass through and thus steel to be attacked.”

and continued unabated until the structure collapsed, leading to an

On that occasion, no major reinforcement work was planned for the

unacceptable reduction in the area of the resistant section of the strands

stays of pylons 9 and 10, but only consolidation operations.

that formed the core of the tie rods, essential elements for the stability of the bridge.”

Corrosion as a trigger for collapse

We can therefore conclude that corrosion undoubtedly contributed to

What is striking about the first expert report investigating the origins

weakening the strands of the tie rods of pylon 9, thus wearing down

of the viaduct’s collapse is the lack of inspection documentation on the

the structure from the inside, and led to its collapse on 14 August

stays after the 1992-93 analyses and interventions.

2018, 51 years after its construction. It was only thanks to the special

“No tests similar to those carried out in the three-year period 1990-92, in

system designed by Morandi, with isolated modules independent of

particular direct investigations into the state of pre-stressing cables, were

the neighbouring pylons, that the collapse only affected the part of

carried out, or at least there is no trace of them.”

the bridge connected to pylon 9, allowing the evacuation of motorists

After the 1993 works on pylon 9, a “continuous reflectometric control

suspended on the nearby slabs and avoiding an even greater tragedy,

system to check the state of deterioration” was installed, consisting of a

which would have affected the densely populated area and the industrial

sensor that, as engineer Camomilla recalls, was supposed to assess the

and railway area below.

20

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


ANALYSIS

How can corrosion of metal reinforcements be avoided?

methods, as it uses the magnetic properties of iron to locate rebars.

In order to prevent the corrosion of metal reinforcements, it is possible

• Potential mapping, on the other hand, is an electrochemical method that

to repair the deteriorated concrete with different types of maintenance

involves determining the reference potential value with a device placed

strategies. However, the preliminary inspection and control of the

on the concrete surface, using a damp sponge to guarantee electrolytic

structure under analysis is always essential.

contact. This makes it possible to define the extent and intensity of the corrosive phenomenon on the reinforcement bars caused by a decrease

How can one tell if rebars are corroded?

in the alkalinity of concrete, due to carbonation phenomena or attacks by

One of the difficulties immediately identified by those responsible for the

aggressive substances.

maintenance of the Morandi Bridge was the impossibility of naked-eye

In the case of pre-stressed steel tie rods, however, the measurement of

estimating the conditions of the strands embedded in concrete. However,

the potential is made difficult by the presence of polymeric or metallic

the cracks detected a few years after the bridge was built had already

strand cover sleeves. In addition, unlike conventional steels, pre-stressing

been considered a warning sign by the builder himself.

steels can show other forms of corrosion such as stress corrosion,

Today, there are different methods for checking the corrosion status

hydrogen embrittlement, fatigue corrosion, and fretting corrosion.

of metal inserts in-situ. These include visual inspections and structural

This is why, in 2004, a monitoring system called MuRE (Multi Reference

monitoring systems with automatic, continuous acquisition capability,

Electrode)5 was developed, consisting in positioning a series of electrodes

which, in the case of reinforced concrete bridges, detect cracks,

along a strand that can detect the onset of corrosion wherever it occurs.

deformations, and abnormal movements of the structure through

In any case, the monitoring of the status of a bridge is only effective if it is

sensors or radars connected to specific software. Other methods are

accompanied by timely maintenance.

magnetic tests using a pacometer and electrochemical tests such as potential mapping. Let us look at the latter in more detail:

5

https://www.ndt.net/article/ndtce2009/papers/73.pdf

• Pacometer tests are carried out using a digital instrument capable of measuring the presence, direction, and diameter of rebars inside

© Riccardo Morandi

reinforced concrete elements in a non-destructive way. It also allows measuring the thickness of concrete covers and rebar spacing. This inspection system belongs to the group of the so-called magnetic

One of three balanced systems designed by Morandi for the viaduct’s pylons 9, 10, and 11: the deck was supported by pre-stressed concrete tie rods, called stays, which connected the deck itself to the top of the trestle masts.

© Roberto Brumat

The Polcevera Viaduct, which was 1,102 m long and consisted of 11 bays created by 12 pylons, was inaugurated in July 1967.

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

21


SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

What can be done if rebars are corroded?

• the use of the cathodic protection method, an electrochemical

Several methods can be used to prevent corrosion of metal

technique based on the coupling of two metals with different natural

reinforcements in concrete. It is possible to increase the protective

potentials: the steel of which the reinforcing bars are made and

capacity of concrete by adjusting the water/cement ratio or by using

the zinc of the anodes; because concrete acts as the electrolyte,

mix cements whose formulation contain elements such as fly ash,

connecting the two metals generates a direct current that protects

blast furnace slag, or natural pozzolan, which significantly limit the

steel against corrosion;

penetration of chlorides into concrete products.

• the coating of reinforcements with special mortars for restoring

However, if a structure is located in an environment that is very

deteriorated concrete called “thixotropic mortars”, which is one of the

conducive to corrosion, as in the case of the Polcevera Viaduct, more

most widespread methods, as well as one of the cheapest.

radical prevention measures should be taken, including as follows: • the replacement of traditional metal reinforcement with stainless

In the case of corrosion of the strands in pre-stressed concrete

steel, a material more resistant to attack by chlorides;

structures, repair work is aimed at consolidating the cables and

• the coating of reinforcements with thermosetting products called

restoring pre-stressing conditions.

“epoxy resins”, which create an effective protective layer as they solidify;

Here, it is possible to intervene with passive restoration systems

• the galvanisation of metal, whereby a zinc coating is applied to the

through the application of unidirectional fabric in materials reinforced

metal substrate;

with polymer matrix fibres, carbon bars, B450C steel bars, or beton

• the use of corrosion inhibitors, i.e. chemicals that, when added in

plaqué or with active restoration systems through external pre-

small concentrations, can slow down the corrosion reaction by up to

stressing. ‹

more than 95%;

A stage in the Polcevera Viaduct’s demolition in the summer of 2019.

In the “132 Proof”, which is considered essential to detect the Morandi bridge deterioration and the cause of its collapse, only 5 strands out of 464 are not corroded. © Repubblica

© Riccardo Arata

22

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


Shotblasting Washing Air-blasting

Gritblasting Wet-blasting Shot-peening

Descaling Paint preparation Surface preparation Mechanical pickling

From 5,5 kW direct drive motor and 330 mm disk diameter...

...up to 110 kW spindle drive motor and 500 mm disk diameter

Tel. +39 02 97289696 www.itfcorporation.com itfgroup@itf.it Str. Enrico Mattei n°20 20010 Mesero (MI) Italy


FOCUS ON TECHNOLOGY

SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

The Unique Colour of Slussen’s Golden Bridge in Stockholm Was Developed at Teknos Edited by Teknos Group* Helsinki – Finland

heidi.mendes@teknos.com

* In cooperation with City of Stockholm and Foster + Partners architect company

Teknos developed a unique coating system with special gold effect, which was carefully customized to the precise wishes of The City of Stockholm and Foster+Partners architectural firm, to coat the new Slussen’s Golden Bridge in the Swedish capital.

T

he most centrally located junction of Sweden’s seaside capital has

development project for the city of Stockholm.

received a landmark worthy of it – a golden bridge that emphasizes

The arrival of the bridge as sea freight from its country of manufacture,

the beauty of historic Stockholm’s architecture. The golden colour was

China, was an event closely followed by Stockholm and international

created with a totally unique shade of paint, developed specifically for

media. The bridge travelled 20,333 kilometres and 70 days in variable

the bridge with Teknos’ unrivalled expertise.

and difficult marine conditions. Teknos’ bridge coating system has been designed to last many years

Completion of the bridge: a significant event

without maintenance, thus meeting the requirements set out by the

The renovation to create the new Slussen has been an extensive

Transport Agency of Sweden. The steel bridge was coated in China to full

and multi-phased project. As one of the first visibly completed parts,

corrosion and weather protection standards, which protected the bridge

Slussen’s new bridge was inaugurated in fall 2020 by the Swedish royal

during the long sea voyage. In Sweden, in its final location, the bridge

family during a prestigious event.

received its top golden layer of paint. Teknos supported the entire

The inauguration of the bridge was a significant milestone in the area’s

surface coating process in both locations, China and Sweden.

© Stockholms stad

Slussen’s Golden Bridge in Stockholm.

24

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


FOCUS ON TECHNOLOGY

The precisely defined shade of gold is in harmony with its environment

different shades of gold and textures. Charlotte De Ferry Foster,

Central to the new bridge’s look is its unique golden colour, which is

progressed: “Several different suppliers’ paint samples were compared

where the nickname given by the Swedes to the bridge, “Guldbro”,

in the final location of the bridge to verify the shade in its real

golden bridge, originates.

environment. This was to ensure that the shade of the bridge would

The City of Stockholm and firm of architects, Foster + Partners,

be certain to fit the entire material palette of the city context, as well as

carefully defined the golden colour so that the bridge is in harmony

the surfaces surrounded by the water, for example its wood elements

with the surrounding scenery throughout the year. “A metallic colour is

and the different shades of granite.”

a natural choice for a steel bridge, and as a warm shade, gold sits very

At the end of the evaluation and selection process, Teknos’ paint

well also in the cold winter scenery,” explains Spencer de Grey, Head of

sample stood out and was therefore selected as the approved colour.

Design at Foster + Partners, the architects of New Slussen.

“The selected coating is not an even, traditional RAL or Pantone colour,

Spencer also emphasizes how important it was to define the bridge

it is much more. Its characteristics facilitate the kind of glow that we

colour in terms of its historical setting. To select just the right shade

were seeking against the surface of the water surrounding the bridge,”

of gold, the orange and yellow facades of the Old Town were taken

Charlotte rejoices.

Partner at Foster + Partners, describes how the selection process

into account. In addition to the shade, the right texture was also an important factor, because it determined the bridge’s reflective

Developing a unique paint requires special expertise

characteristics.

Although searching for different solutions for the needs of customers is very normal, Antti Karkola, Head of Teknos Research and

Suitable shade was ensured on the spot

Development, emphasizes that making this kind of a gold effect paint

At the start of the project, potential paint suppliers were presented

for a large piece of infrastructure is in itself an exceptional task, the

with a specific model of a gold effect paint, from which several paint

likes of which he has not come across during his career. Because the

manufacturers started to develop alternatives.

gold effect paint has been carefully customized to the precise wishes

A lot of time and effort were spent on the selection of colour, the

of the customer, the Teknos team remained in particularly close

firm of architects and the City of Stockholm went through numerous

contact with both the City of Stockholm and the firm of architects.

© Foster+Partners

Rendering of the New Slussen Masterplan developed by Foster+Partners architectural firm.

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

25


SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

In normal colour shade development, a spectrophotometer can be used to provide a generic assessment of the correctness of the colour. In the development of a unique gold paint however, there are challenges. “The shade of this type of paint cannot be measured because no objective shade comparison can be found for it. The shade has been created purely “by sight”, Karkola clarifies. Another special challenge was connected with the long duration of the project – Teknos joined the project in 2014, and the first part of painting the bridge’s gold layer took place in 2020, the finishing painting in 2021. In terms of production, this means making several different paint batches over the years, from the test paints to the final, larger paint delivery. “Adjusting the shade to the correct one and maintaining the same quality from one batch to another has required more from product development and also from production. In practice, all

© Teknos

manufactured batches have been personally approved with regard to the shade,” Karkola explains.

Golden Bridge is a central landmark After its completion, the Golden Bridge is one of the most visible parts of Slussen’s massive renovation. “The selected colour is very special, as it should be for such a significant bridge in its historic environment. Gold gives the bridge its own identity, as a colour it is very symbolic. People of Stockholm have understood this and embraced the bridge,” Spencer says happily. “The golden bridge acts as the central point of the capital.” “This project was an excellent cooperation experience with Teknos. The fact that the Teknos R&D team went the extra mile to achieve the end product and that we were able to utilize the expertise of Teknos professionals was fantastic and something entirely new,” Charlotte de Ferry Foster says. Praise is also heaped on the project team gathered by the City of Stockholm, which made it possible to realize the vision

© Teknos

intended by the architects, and which facilitated success. “I am sure that we all enjoyed both the challenge and the end result of the cooperation. This has been wonderful,” Spencer de Grey adds. Slussen’s bridge is a special reference also for Teknos people, who have given their full commitment to this unique project, both with regard to colour development and painting consultation. From top: - The bridge’s golden colour was carefully studied by The City of Stockholm and Foster+Partners so that this steel structure is in harmony with the surrounding scenery throughout the year. - The characteristics of coating developed by Teknos emphasise the glow effect against the surface of the water surrounding the bridge. - The gold effect paint has been carefully customized to the precise wishes of the customer.

© Teknos

26

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


FOCUS ON TECHNOLOGY

© Teknos

© Teknos

To select just the right shade of gold, the orange and yellow facades of the Old Town were taken into account.

Slussen acts as a key link between the islands of Old Town and Södermalm.

Stockholm’s historic central junction is renovated

CRSBG. The final layer of the painting system was undertaken by the

The importance of Slussen as a core area of Stockholm is significant,

Swedish coating company IPM Norden. When the project progressed

and its history goes far back to the 17 century. The infrastructure of

to the phase of painting the sixth, golden layer, local cooperation

this area of capital with the heaviest traffic was last renovated more

between Teknos Sweden and IPM Norden had an important role. With

than 80 years ago. Slussen acts as a key link between the islands of Old

the Teknos way of operating, the various stakeholders of challenging

Town and Södermalm, and in its location, the saltwater and freshwater

construction projects receive timely and local support precisely where

of the surrounding bodies of water merge.

it is needed at each phase of a project.

th

The renovation of the new Slussen was an extensive and multiphased project. The main focus of renovating the area, in addition to

Masterpiece by painting professionals

controlling traffic, was to make the waterfront pleasant again so that

The appearance of the end result was also greatly impacted by the

the city’s inhabitants can enjoy the proximity of the sea in parks and

painting technique. The special composition of the gold paint brought

restaurants, walking as well as cycling.

its own challenges, requiring special skills and equipment from the painters. Painting was undertaken by Swedish IPM Norden’s true

Teknos’ expertise demonstrated in agile global cooperation

professionals who have years of experience in painting bridges.

During the project, Teknos’ agile and global working methods showed

meaning that normal spraying equipment cannot be used.

their practical benefits. The Teknos sites in Sweden and Finland worked

Spray painting this size of a bridge with gold liquid paint is like painting

in close cooperation in the development of the unique gold colour.

a giant artwork – real craftmanship, where the painting technique also

Teknos supported the entire surface coating process in both locations,

has an impact on achieving the right metallic effect“, Göran Sigfridsson,

China and Sweden. Teknos China was closely involved in the project

Head of Industrial Painting Solutions at Teknos Sweden, emphasizes,

and delivered the 5-layer system for the Chinese bridge manufacturer

“We are talking about a very special paint that has special fillers,

being involved in the project since the beginning. ‹

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

27


INNOVATIONS: PRESENT&FUTURE

SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

Easy Corrosion Solution for Post-Tension Grouting Delays Ivana Liposcak Cortec® Corporation – St. Paul, United States

iliposcak@cortecvci.com

Patented MCI® Technology developed by Cortec is now using in the most demanding projects when protecting reinforcing metal in concrete from corrosion is essential.

C

ortec’s Patented MCI® Technology designed to protect reinforcing

Unfortunately, delays are very common in large construction projects

metal in concrete from corrosion is widely used around the globe.

such as bridges that may take many years to complete. For structures

Application of MCI products experienced rapid growth in recent years

that use post-tensioning, grouting is one step that is often postponed

due to a number of factors such as proven efficiency and environmental

for several weeks or months due to cold weather, transit of precast

advantages. By using this technology, corrosion initiation is delayed, and

segments, or other project delays. During this time, post-tensioning

the lifecycle of structures is significantly extended.

(PT) tendons installed in PT ducts are at risk for corrosion, especially in

®

Designers and contractors across Europe are now using MCI®

environments of extreme moisture, chlorides, or high temperatures.

Technology in the most demanding projects. Currently, MCI -309 is

While it can be difficult to protect these tendons in such hard-to-reach

being used in the construction of viaduct over the Taro river in Italy.

areas, Cortec® has provided a simple solution by offering MCI®-309, a

New cables will be grouted with cement grout in about two to three

Migrating Corrosion Inhibitor™ that requires no flushing before grouting.

months. After tensioning of the cables, MCI -309 powder will be

MCI®-309 has been recently improved by removing silica from its

applied to ensure proper protection of the cables during this period.

formulation.

®

®

© Pegaso Group

The construction of viaduct over the Taro river in Italy.

28

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


INNOVATIONS: PRESENT&FUTURE

Protecting Post-Tension cables from corrosion MCI®-309 is a powder-based Migrating Corrosion Inhibitor™ for protection of ferrous and aluminium metals located in recessed areas, interior cavities, and structural voids. It is an extremely efficient dry method of protecting metals within an enclosed space by simply dosing MCI®-309 powder into the void. Upon application, it vaporizes and forms a molecular layer of corrosion inhibitors on the metal surface. If this layer is ever compromised (for example, by moisture or by opening the enclosed space), it will be automatically replenished by new vapour being continuously released from the powder carrier. MCI®-309 is considered ambiodic (mixed), meaning it protects both anodic and

© Cortec

cathodic corrosion sites of the metal. It does not contain silica, silicates, phosphates, nitrites, or heavy metals.

Streamline the grouting process MCI®-309 is one of the easiest and most cost-effective methods on the market for corrosion protection of prestressed tendons. It requires little to no surface preparation and is easy to apply by dusting, fogging, or sprinkling. It is also easy to remove by air gun or water. As a matter of fact, the removal of MCI®-309 is typically not required prior to concrete or grout placement. This is a huge advantage over oily or grease-based corrosion inhibitors that need to be cleaned off before grouting, introducing moisture into the cavity by means of an expensive and time-consuming cleaning process. MCI®-309 does not affect physical properties of concrete and grout. Testing has also confirmed that

© Pegaso Group

MCI®-309 does not affect strand pull-out strength compared to a control. There are countless potential uses for MCI®-309, the most obvious being protection of PT strands placed in bridges but not yet grouted. Sometimes this is needed on location where the bridge is going up; sometimes it is offsite where bridge segments are precast and prepared for transit. MCI®-309 can also be fogged into a variety of other tubular structures, pipes, and vessels where inaccessible or recessed metal surfaces are at risk for corrosion but are otherwise difficult to reach.

© Acciona

While MCI®-309 is typically used for construction and grouting delays of several weeks or months, the product can actually provide up to 24 months of protection. ‹

From top to bottom: - For structures that use post-tensioning, grouting is one step that is often postponed for several weeks. - MCI®-309 is being used in the construction of viaduct in Italy. - MCI® technology is used for corrosion protection of PT concrete segments of new Frederikssund bridge in Denmark. - The Frederikssund bridge was officially opened in September 2019.

© Matacryl


INNOVATIONS: PRESENT&FUTURE

SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

Advanced Zinc Technology for Extending the Lifetime of Metallic Assets Rick Simpson, Senior Corrosion Consultant ZINGAMETALL Worldwide

rick@zinga.eu

One of the most severe issues in ‘reloading’ old hot dip galvanised steelwork of electrical transmission pylons and structures is maintenance time. The Film Galvanising System was developed by Zingametall company so that these structures could be regalvanised in-situ without disruption that may compromise its operation.

A

round 42 years ago a Film Galvanising (FG) System was developed

for supporting overhead electrical cables over railway tracks. This system

in Belgium, specifically for the purpose or ‘reloading’ old or very

had to be very pure zinc, and it had to have a matching electrical-potential

weathered hot dip galvanised steelwork and this was aimed principally at

to that of hot dip galvanising (HDG) as well so that it would not form a

electrical transmission pylons and structures like the catenary structures

galvanic cell with the original hot-dip zinc.

30

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings © AdobeStock


INNOVATIONS: PRESENT&FUTURE

The chemist who developed the FG system was a very forward-thinking

daily basis it might deplete at 5 or 7 µm per year.

person, as he knew that in the future years it would be either prohibitively

The FG system can therefore be applied at the correct thickness to suit

expensive and/or virtually impossible to dismantle a corroded pylon and

the particular location of the structure, and structures situated in high hills

replace it once the zinc had depleted back to the bare steel. Such an act

or in arid countryside may only require, for example, 90 µm DFT to last

would cut off the power-supply to thousands of homes and businesses,

30 – 40 years+, whereas near the beach they may require 120 – 150 µm

and likewise to cut off the power-supply to the rail network would mean

DFT to obtain such an expected service-life. So contractors do not have to

millions of commuters could not get to work (Fig. 1).

waste zinc where it is not required.

Hence the Film Galvanising System was developed so that these structures and many other hot dip galvanised (HDG) structures could

Re-loading old galvanising

be re-galvanised in-situ with and with no disruption, or in some cases

Where electricity pylons and other important structures only have a thin,

an hour or two of disruption at most so that people’s daily lives are not

weathered layer of HDG zinc remaining on the steel surface, they are

affected in any way. Like HDG zinc, the Film Galvanising (FG) zinc also

given a sweep-blast at 3 bars of pressure and using a nozzle-angle of 45°.

depletes at a few microns per year, so there will never be flaking paint or

This is so that the blast will roughen the HDG surface to provide a high

troublesome residues to remove from the steelwork when the existing

adhesion-factor for the FG zinc, but without removing any the HDG zinc.

HDG or even FG zinc needs to be ‘re-loaded’ to restore the zinc thickness

The whole point of re-loading is to build-up the zinc.

back to its original or similar thickness.

Where a galvanised structure has been neglected over the years and is showing areas of red rust, then these areas are fully blast-cleaned, again

Depletion rates

using a vapour-blaster (no dust is generated) and then the FG zinc is

The FG zinc is also like HDG zinc in that it depletes at different rates

applied by brush, with second coats going on very fast using rollers

according to its geographical location, so where an electricity pylon is

(Fig. 2). As the FG zinc is generating over 1100 mV of electrical potential,

situated in high hills far away from the coast the zinc may deplete at only

the driving-voltage is very strong and the zinc galvanises the steel in the

0.1 µm per year, whereas at the coast being covered in salt-spray on a

same way as HDG zinc, and so it complements its cathodic protection.

© Zingametall

© Zingametall

Figure 1 - ZINGA® application at 45 m height.

Figure 2 - Vapour-blasting an electricity pylon.

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

31


SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

© Zingametall

Dynamic adhesion values & electrical potential

will do no harm at all, and it can be applied onto steel in temperatures of

Unlike zinc paints, the FG system uses a totally unique type of zinc, and

-15 °C. This makes it a lot easier to plan painting programs each year, and

one of its amazing characteristics is the dynamic adhesion values that

there is no annual loss of half a year of maintenance work due to weather

it displays. After seven days of exterior exposure, this zinc will show an

conditions.

adhesion-value of around 5 MPa on a tensile pull-off test, and after three months this rises to around 7 to 9 MPa, and after one year or less it can

Systems tested

rise to >10 MPa where it remains for the duration of the zinc’s

The FG system was tested in European testing laboratories to the ISO

service-life. Most zinc-rich paints will have an electrical potential of around

12944 standard, and this testing revealed that when applied at a film

740mV – 780mV, whereas the FG zinc has a normal electrical potential

thickness of only 120 µm DFT, it complied to the following standards:

of more than -1050mV. It has been proven that a minimum of -850mV

• ISO 12944 - C5 (VH): coastal atmospheric exposure with expected

is necessary to provide real cathodic protection. So, where steel has an

durability of 25 + years.

electrical potential of 640mV, this represents a driving-voltage of around

• ISO 12944 - Im4: offshore immersion on wind turbines etc

430 – 450mV compared to that of zinc-rich paint which is 100 – 150mV,

• ISO 12944 – CX: offshore atmospheric exposure

showing that the FG zinc has a cathodic protection current 3 x times

• ISO 12944 - Im2: immersion in salt/brackish water

higher.

• ISO 12944 – Im3: structures buried in soils.

Scandinavian weather

Statnett regalvanises power masts on Karmøy

One big advantage of using the FG system in north-western Europe is that

In Norway the organisation Statnett, who maintain the electricity

where the normal painting season is around May – August, this system

transmission pylons for the national grid, are currently re-loading the HDG

can be applied all year round, unless it is physically snowing or raining.

zinc on some pylons in one of their lines, and once again the versatility

Even if it rains onto the zinc two hours after application (after hard dry), it

of the product has proven to be extraordinarily helpful in accessing tight

32

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


INNOVATIONS: PRESENT&FUTURE

© Zingametall

© Zingametall

areas such as bolted joints in order to load the old zinc layer literally

preparation for the re-loading.

everywhere on the pylon. The masts are sandblasted and treated with the

Transmission pylons are normally never tented in, because it is initially

FG system (Fig. 3).

an unnecessary cost added to the project, but more importantly the

What is happening on Karmøy is historic: “Regalvanisation of entire

new blasting technology using vapour-blasters as opposed to traditional

masts is common in many countries, but this is the first time it is done

grit-blasting equipment means that there is no dust during the blasting

in Scandinavia”, says Thor Smette, CEO ZINGA AS (Norway) and ZINGA

operations, and the wet abrasive normally drops directly below the tower.

Sweden AB.

So the clean-up phase is very fast.

Statnett’s power line masts are mainly hot-dip galvanized steel masts.

Depending on the abrasive used, it has been seen on several pylon sites

Hot-dip galvanizing is the best method of protecting steel from rust while

that no clean-up was required, because the abrasive blends in with the

keeping it maintenance-free and free for decades, but the protection

surrounding ground as it is a silicate-based abrasive with natural colours

does not last forever.

that do not stand out.

The rust protection breaks down at a stable speed. The degradation, which in the technical language is called the sacrifice, is measurable. The pace depends on local conditions. Zinc is broken down faster along the coast and in industrial areas than inland without the impact of salt from the sea and industrial pollution. In Figure 4 it can be seen that a multicomponent bolted joint has been successfully re-loaded, including all of the nuts and exposed bolt-threads. The first pylon to be coated with the FG system (Fig. 5) was fully ‘tented in’ due to its close proximity to the offices of Statnett, and it can be seen that the old and weathered galvanising has been given a sweep-blast in

From left to right: Figure 3 - Pylon-base in Norway which has been re-loaded. Figure 4 - A multi-component bolted joint has been successfully re-loaded, including all of the nuts and exposed bolt-threads. Figure 5 - The first pylon to be coated with the FG system.

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

33


SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

© Zingametall

© Zingametall

Figure 6 - A typical Norwegian pylon design.

Figure 7 - In Costa Rica FG system (ZINGA®) is used by ICE on remote towers.

In Figure 6 can be seen a typical Norwegian pylon design. This allows

clean the surface. A good example of such method can be found in Costa

one side of the pylon (one electrical phase) to be switched off for a few

Rica where ICE (Instituto Costarricense de Electricidad) is using ZINGA®

hours while maintenance work is carried out. The other side remains ‘live’

to treat remote towers by using wire brushes and clean water as surface

and it is always “tagged-out”, which means that large red plastic tags are

treatment.

attached to the live side of the tower at various heights to let engineers

According to Diana Venegas, Project Engineer at Tecnosagot (Costa Rica),

know what side it to be worked on and what side is “live”.

the first pylons treated in 2010 are still in a good shape. The pylon in

In this manner, the percentage of power customers can only lose their

Figure 7 is close to an active volcano, so it receives all the fumes. ‹

power for four or five hours whilst the remaining customers can continue to have power to their homes and offices. In locations where blasting is not possible HDG can also treated with mechanical tools like rotative brushes or flap disks. As this is a manual

The author would like to thank Thor Smette, CEO ZINGA AS (Norway) and

operation, the time needed for preparation will be longer. Life expectancy

ZINGA Sweden AB for his input about the Statnett power masts on Karmøy

depends also on the degree of cleanliness, so extra care must be taken to

in Norway and Diana Venegas, Project Engineer at Tecnosagot.

34

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


BRAND-NEW

SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

Cortec’s MCI®-2005 Passes the ASTM G180 Testing The biobased organic admixture developed by Cortec has passed the testing for corrosion inhibiting admixtures. Cortec® Corporation has recently announced that its MCI®-2005 is the first biobased, organic corrosion inhibiting concrete admixture to pass the ASTM G180 protocol under ISO 17025 accredited testing.

T

he durability and the corrosion protection of metal products in

Characteristics of MCI®-2005

concrete structures are two of the biggest issues concerning

MCI-2005 is an organic, biobased corrosion inhibitor for protection of

engineers and construction workers, as evidenced in recent tragedies

metallic reinforcement in concrete structures containing a blend of amine

such as the collapse of a residential building in Florida and the Morandi

salts of carboxylic acids. Unlike calcium nitrite admixtures, which have a

bridge in Italy. Cortec has therefore developed the MCI® Technology, a

set accelerating effect that can cause early setup problems, MCI®2005

corrosion inhibiting admixtures that has proven efficiency even in severely

delays set time, making the concrete easier to work with and reducing

corrosive environments.

the heat of hydration. In addition to this, it contains 67% USDA certified

Cortec Laboratories conducted the ASTM G180 test, one of the two

biobased content and is certified to meet ANSI/NSF Standard 61 for use in

corrosion performance tests specified in ASTM C1582 - Standard

large potable water structures.

Specification for Admixtures to Inhibit Chloride-Induced Corrosion of

When incorporated into concrete, MCI®-2005 forms a protective

Reinforcing Steel in Concrete. The lab provided the testing through its

molecular layer on embedded metals to inhibit corrosion. In new

independent ISO 17025 accreditation.

construction, this is quantified by an increase in critical chloride threshold

The testing method, that measures corrosion inhibition ability in

and subsequent reduction in corrosion rates, once corrosion initiates.

chloride environments, is used to ensure that admixtures meet the

When used with repair mortars and grouts, it is also able to migrate into

widely accepted industry standards for the selection and qualification of

undisturbed concrete adjacent to the repair to protect reinforcement

corrosion inhibiting admixtures. Manufacturers usually use it to screen

already in place.

new chemistry formulations for their potential as corrosion inhibiting For further information: www.cortecvci.com

© Cortec

admixtures.

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

35


SUCCESS STORIES

SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

Bridge Repairs Streamlined Thanks to Waterproofing with Polyurea The Kaarepere bridge’s pavement in Estonia was stressed by varying weather conditions as well as constant loading due to the heavy traffic. It was repaired in the summer of 2020 and waterproofed with the TEKNOPUR polyurea coating system by Teknos.

I

n the renovation of the Kaarepere bridge, the bridge was

especially by HGVs. Therefore, the bridge pavement is stressed by

waterproofed with a sprayable Teknos polyurea coating system. The

varying weather conditions as well as constant loading. There was

highly waterproof, elastic and resistant polyurea forms a seamless

extensive damage to the bridge pavement, such as dents, humps and

waterproofing film that adheres firmly to the surface of the bridge’s

cracks.

concrete deck and lasts well in Estonia’s extreme temperature

Bituminous film materials, which are traditionally used as waterproofing

fluctuations.

materials and applied to concrete, act like an adhesive and adhere

The bridge was kept open to traffic while under renovation and

firmly to the substrate during the installation phase when heated by

waterproofing was renewed within less than a week.

fire. However, heat also exposes the surface to changes. In addition, the surface of the concrete is never perfectly smooth. When two materials

Damaged pavement of a heavily trafficked bridge in need of renovation

glued together are stressed, air pockets may be left between the film

The Kaarepere bridge is located in Estonia, where temperatures can rise

In the hot summer heat of Estonia, the temperature of the black asphalt

above +30 °C in summer and drop below -20 °C in winter.

road can rise up to +70 °C, and even the smallest air bubble between

The Kaarepere bridge was constructed in 2011 and is heavily trafficked,

the waterproofing material and the concrete collects heat, which in

and the concrete.

© Teknos

© Teknos

In Estonia, 11 bridges have already been waterproofed with Teknos polyurea. In the waterproofing of bridges, the use of polyurea elastomer is an innovative method and is rapidly becoming more widespread.

36

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


turn increases the air pressure in the bubble. As a result of the air pressure, a hump rises to the road surface and the asphalt breaks. Much of the damage to the road surface of the Kaarepere bridge was due to this phenomenon. Broken asphalt is a danger to traffic, and it also exposes the concrete bridge structure to erosion. In general, bridges can be in very poor condition as early as 3 to 4 years after completion. Repairing poor road surfaces and bridges takes time, and long road repairs interrupt and slow down traffic for months. The time required for repair work was significantly reduced with polyurea as waterproofing speeded up the work.

Repair operations The damage to the bridge was repaired during the renovation in the summer of 2020 and waterproofed with the TEKNOPUR polyurea coating system. Teknos’ SILKO-approved coating system guarantees that waterproofing with polyurea complies with the Nordic quality standards of the bridge repair regulations. Polyurea is a highly waterproof coating that forms a seamless film. The sprayable polyurea fills the cracks in the surface and bridges them as a highly flexible coating. Polyurea adheres tightly to concrete according to its surface shape and performed very well in

Kaarepere bridge project info Bridge built in 2011 Renovation completed in 2020 Length: 82 m / Width: 9 m Location: Kaarepere, Estonia Owner: Estonian Transport Agency Contractor: TREF AS Industry: Infrastructure construction Products used SILKO-approved coating system from Teknos: - TEKNOFLOOR PRIMER 306F-01 - TEKNOPUR 300-800 - TEKNOPUR SEALER 100 Total coated area: ca. 750 m² Total amount sprayed: ca. 2,700 kg


SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

the adhesion tensile test performed at the design stage. The whole renovation was completed one week faster than with the more conventional method, as the entire coating process of the bridge could be shortened from 10-14 days to 6 days, which is the fastest possible time to renew the waterproofing on a large bridge deck like this. The waterproofing work with polyurea spraying went quickly — polyurea cures in seconds and the bridge deck can be covered with asphalt soon after the adhesion treatment. Polyurea is a highly stretchable and durable coating whose reliability is not affected by the © Teknos

heat of the asphalt.

Waterproofing with polyurea allows traffic to continue throughout the renovation work There were no disruptions to traffic in Kaarepere during the renovation of the bridge, because in the waterproofing phase before the asphalt work, the polyurea was first sprayed onto one section of the strip, after which the traffic could immediately resume in this already waterproofed strip. The cured polyurea film withstands heavy traffic well. As traffic resumed in the already waterproofed lane, renovation work continued in the second lane until the lane with its waterproofing © Teknos

and asphalt was completed, and traffic was again transferred to the fully finished lane. The final phase of the renovation consisted of

© Teknos

completing asphalt work in the second lane. For further information:

www.teknos.com/industrial-coatings

Thanks to the Teknos’ SILKO-approved coating system, the repair operations were completed one week faster than with the more conventional method. Polyurea adheres tightly to concrete according to its surface shapes.

38

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


Get your complimentary ticket Register for free today using code > 2023 www.stocexpo.com

8 - 10 March 2022 Ahoy, Rotterdam

Place yourself at the heart of the leading bulk liquid storage event


© Cortec

SUCCESS STORIES

SPECIAL ISSUE ON PROTECTIVE TECHNOLOGIES FOR BRIDGES, HIGHWAYS, INFRASTRUCTURES

MCI® Technology Applied on Peljesac Bridge Providing Road Link Between Two Parts of the Country Cortec® Corporation helps in decades-long dream of connecting Croatia after 300 years in one of the most demanding construction projects in the world.

R

anking among the most demanding bridges in the world - not

property to protect against the harmful effects of corrosion, thus

only in terms of complexity of construction but also in a complex

extending the service life of the bridge. MCI® 2018 is a 100% silane-

design - 2,404-m (7,887.14-ft) long, Peljesac bridge is one of the most

based concrete sealer containing migrating corrosion inhibitors that

important and largest infrastructure projects in Europe.

allows deep penetration into concrete and provides water repellence

Connecting Croatia’s Peljesac peninsula with the mainland to bypass

by chemically reacting with the cementitious substrate. It seals surface

a short stretch of the Bosnia and Herzegovina coastline started three

pores, preventing the intrusion of chlorides, reduces carbonation,

years ago. The project is worth 550 million euros, although most of the

and protects from the ingress of wind-driven rain. Treated concrete

funding came from the European Union.

surfaces are fully breathable and their natural moisture-vapour

ln order to meet the main criteria of quality design, such as stability,

transmission is not affected. After repair of surface damage and

durability, economy, and integration into the environment, the

cleaning of discolorations and other surface defects, the concrete

inventive design proposed the construction of an extra dosed bridge

surface of the pylons needed to be protected with a colourless

with an integrated hybrid structure comprising of five central spans,

silane coating to improve durability and increase the resistance of

each 285-m long, and six low pylons. Especially careful approach was

the concrete surface to long-term external influences. MCI®-2018

taken to ensure durability for the extended lifespan of over 130 years.

carries CE certification that indicates conformity with health, safety

Cortec’s MCI® 2018 was specified on this project during the design

and environmental protection standards for products sold within the

phase as a silane-based impregnation with a migrating inhibitor

European Economic Area (EEA).

40

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


SUCCESS STORIES

Application of MCI®-2018

place will be done during the construction phase and the exploitation

A combination of AC coatings, cathodic protection of steel reinforcement

phase to examine parameters of structural behaviour, time, seismic

in piles and pile heads, a concrete cover of 65–85 mm stainless steel

activity, and structural durability. The designer of the bridge specified

reinforcement and impregnation of all concrete surfaces with MCI -2018

corrosion protection for all concrete segments in order to achieve a

was chosen as the strategy to help the bridge achieve a 130-year service

130-year service life. After completion, the Peljesac Bridge will be ranked

life. MCI -2018 was applied on the entire substructure of the bridge. All

among the five largest and most attractive European bridges, constructed

concrete parts were coated with MCI®-2018 by a spraying technique. The

at the beginning of 21st century. This important new structure is

work was performed in accordance with the project requirements and

connecting two separate parts of Croatia and bypassing border crossings

after surface preparation to full functionality.

at the short coastal strip near Neum in Bosnia and Herzegovina.

This included:

Cortec’s CEO, Boris Miksic, Croatian-American businessman is proud that

• Access to pylons

his patented technology was used on this historic project to connect two

• Rehabilitation of the concrete surface of the pylons

parts of his country. “Our MCI® technology is used in largest construction

• Cleaning the concrete surface of the pylon (washing the pillars with

projects throughout the globe. I dedicated more than forty years of

water)

my life in developing most advanced, environmentally safe corrosion

®

®

• Impregnation of the concrete surface of the pylon with MCI®-2018.

protection solutions. Witnessing its application in my home country on

MCI -2018 contains time-proven Migrating Corrosion Inhibitors (MCI ).

this monumental bridge structure is truly a special feeling. Croatia has

The silane component provides water repellency by chemically reacting

gone through some tough times, having to fight its independence in a

with the cementitious substrate under proper application, decreasing

war 30 years ago. Seeing it prosper and develop in of the most desirable

the ingress of aggressive materials. The product penetrates deep into

countries in Europe feels just about right and completion of Peljesac

concrete, providing corrosion protection to reinforcing steel from existing

bridge is huge step forward for all of us.”

®

®

water and chloride ions, or other contaminants. For the Peljesac bridge, continuous monitoring of the condition of the structure at one central

© Cortec

For further information: www.cortecmci.com

© Cortec

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

41


INSPECTION LOGBOOK

Coating Inspections - Inspection of Steel Surface Preparation, Part 5 Massimo Cornago NACE International Certified Coating Inspector, NACE CIP PEER Reviewer

F

cornago@ipcm.it

ollowing the previous article, “Inspection of Surface Preparation

White metal blast cleaning (NACE1/SSPC-SP5)

of Steel, Part 4”, and before we discuss other surface preparation

The NACE1/SSPC-SP5 White Metal Blast Cleaning standard states that

systems and their related inspections, beginning with the abrasive

“when viewed without magnification, the surface shall be free of all

blast cleaning process and its related inspection method, let us start

visible oil, grease, dust, dirt, mill scale, rust, coating, oxides, corrosion

by considering the appropriate international standards: NACE, SSPC,

products, and other foreign matter.”

and ISO (the latter of which will be covered in another article). For

Acceptable variations in appearance that do not affect surface

many years, the industry has referred to the NACE and SSPC surface

cleanliness include variations caused by the type of steel, original

preparation standards as if they were exact equivalents, although

surface condition, thickness of the steel, weld metal, mill or fabrication

they actually contained some wording differences. In 1990, the two

marks, heat treating, heat-affected zones, blasting abrasives, and

associations formed a joint task group with the express purpose of

differences due to the blasting technique.

setting joint, identically worded standards for steel abrasive blast

When coating is specified, the surface shall be roughened to a degree

cleaning. Such joint standards were published in October 1994 and

suitable for the specified coating system. Immediately prior to coating

they soon began to be commonly used in the industry at a global level.

application, the entire surface shall comply with the degree of cleaning

Recently, NACE and SSPC have merged and changed their name into

specified. SSPC-VIS1 may be specified to supplement the written

AMPP: Association for Materials Protection and Performance. For the

definition. In any dispute, however, the written standards shall take

time being, however, the standards still maintain the old denomination

precedence over visual standards and comparators.

that we will describe here below.

© Adobe Stock

42

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


INSPECTION LOGBOOK

Near-white blast cleaning (NACE2/-SSPC-SP10)

coating. Tightly adherent mill scale, rust, and paint may remain on the

The NACE2/SSPC-SP10 Near-White Blast Cleaning standard states that

surface.”

“when viewed without magnification, the surface shall be free of all

Mill scale, rust, and paint are considered tightly adherent if they cannot

visible oil, grease, dust, dirt, mill scale, rust, coating, oxides, corrosion

be removed by lifting with a dull putty knife after abrasive blast cleaning.

products, and other foreign matter, except for staining. Random staining

The entire surface should be subjected to the abrasive blast action. The

shall be limited to no more than 5% of each unit area of surface,

remaining mil scale shall be subjected to abrasive blasting. Flacks of the

approximately 58 cm2 (a square of 7.6 cm x 7.6 cm).”

underlying steel need not be exposed whenever the original substrate

Staining may consist of light shadows, slight streaks, or minor

consists of intact coating.

discolorations caused by stains of rust, stains of mill scale, or stains of

If coating is specified, the surface shall be roughened to a degree

previously applied coating. Acceptable variations in appearance that do

suitable for the specified coating system. Immediately prior to coating

not affect surface cleanliness include variations caused by the type of

application, the entire surface shall comply with the degree of cleaning

steel, the original surface condition, the thickness of steel, weld metal,

as specified. Visual standards or comparators may be specified to

mill or fabrication marks, heat treating, heat-affected zones, blasting

supplement the written definition. In any dispute, however, the written

abrasives, and differences in the blast pattern.

standards shall take precedence over visual standards and comparators.

If coating is specified, the surface shall be roughened to a degree suitable for the specified coating system. Immediately prior to coating

Industrial blast cleaning (NACE8/SSPC-SP14)

application, the entire surface shall comply with the degree of cleaning

The NACE8/SSPC-SP14 standard defines an industrial blast cleaned

specified. SSPC-VIS1 photographs A SP-10, B SP-10, C SP-10, or D SP10

surface as follows: “when viewed without magnification, the surface shall

may be specified to supplement the written definition. In any dispute,

be free of all visible oil, grease, dust, and dirt.

however, the written standards shall take precedence over visual

Traces of tightly adherent mill scale, rust, and coating residues

standards and comparators.

are permitted to remain on 10% of each unit area of the surface, approximately 58 cm2 (a square of 7.6 cm x 7.6 cm), if they are evenly

Commercial blast cleaning (NACE3/SSPC-SP6)

distributed. ”Any traces of mill scale, rust, and coating are considered

The NACE3/SSPC-SP6 Commercial Blast Cleaning standard states that

tightly adherent if they cannot be lifted with a dull putty knife. Shadows,

“when viewed without magnification, the surface shall be free of all

streaks, and discolorations caused by stains of rust, stains of mill

visible oil, grease, dust, dirt, mill scale, rust, coating, oxides, corrosion

scale, and stains of previously applied coating may be present on the

products, and other foreign matter, except for staining. Random staining

remainder of the surface.

shall be limited to no more than 33% of each unit area of surface,

The shape, configuration, and design of structures can lead to areas

approximately 58 cm (a square of 7.6 cm x 7.6 cm).”

of limited accessibility for blast cleaning. Examples include crevices

Staining may consist of light shadows, slight streaks, or minor

around rivets or fasteners, and behind or between tightly configured

discolorations caused by stains of rust, stains of mill scale, or stains of

back-to-back angles. Because of such limited accessibility, these

previously applied coating. Acceptable variations in appearance that do

areas are exempt from the 10% restrictions. However, all surfaces in

not affect surface cleanliness include variations caused by the type of

limited-access areas shall be subjected to abrasive blasting and old

steel, the original surface condition, the thickness of steel, weld metal,

coating, rust, and mill scale are permitted to remain on completion

mill or fabrication marks, heat treating, heat-affected zones, blasting

only provided they are well adherent as determined using a dull putty

abrasives, and differences due to the blasting technique.

knife. Acceptable variations in appearance that do not affect surface

If coating is specified, the surface shall be roughened to a degree

cleanliness include variations caused by the type of steel, the original

suitable for the specified coating system. Immediately prior to coating

surface condition, the thickness of steel, weld metal, mill or fabrication

application, the entire surface shall comply with the degree of cleaning

marks, heat treating, heat-affected zones, blasting abrasives, and

specified. SSPC-VIS1 may be specified to supplement the written

differences due to the blasting technique.

definition. In any dispute, however, the written standards shall take

If coating is specified, the surface shall be roughened to a degree

precedence over visual standards and comparators.

suitable for the specified coating system. Immediately prior to coating

2

application, the entire surface shall comply with the degree of cleaning

Brush-off blast cleaning (NACE4/SSPC-SP7)

specified. ISO 8501-1 or other visual standards of surface preparation

The NACE4/SSPC-SP7 standard defines a brush-off blast cleaned surface

may be specified to supplement the written definitions.

as follows: “when viewed without magnification, the surface shall be free of all visible oil, grease, dirt, dust, loose mill scale, loose rust, and lose

In the next article, we will discuss surface profile testing methods. ‹

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

43


BUSINESS CARDS

44

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


Pipeline Coating 8-10 February 2022 Austria Trend Hotel Savoyen Vienna, Austria The forum for the steel pipeline community, exploring pipeline coatings, hydrogen transportation, new technology and markets

JOIN THE INDUSTRY EXPERTS Dr. Nikolaos Liapis Supply and Operations Director ELINOIL SA Dr. Denis Melot Coating, Polymer and Composite Specialist TOTAL Fabio Braga Azevedo Consultant PETROBRAS

Martin H. van Agteren Principal Advisor Asset Management

Laurent Pomie R&D Manager TECHNIPFMC

Sponsored by:

Nicolas Singling Polymer Painting & Coating Specialist SAIPEM

Book your place here Organised by:

Media supporter:

Protective Coatings ®

www.ami.ltd/event-pipeline-PC


THE MARKETING CORNER

2022 Social Media Trends: Everything There is to Know Barbara Pennati eos Mktg&Communication Srl

info@eosmarketing.it

In this article, we summarize the most important 2022 social media trends that will drive digital content and strategies next year.

W

e have reached that part of the year in which the major marketing

TikTok will continue to grow and other apps will adapt

players publish reports on the main trends in the digital world

TikTok was the first non-Facebook-owned app to reach 3 billion

for the following year. Important data and insights – obtained through

downloads globally. Just by this we should understand the power of this

surveys and interviews with industry experts – which help us fully

social network, which is based on user-generated content (UGC), leading

understand the digital world and adjust the focus of our communication

to very high levels of engagement and cross-platform sharing. When we

strategies.

spoke of 2021 social media trends, we mentioned the importance of such

So, let’s inaugurate this series of articles on next year’s marketing trends

content, the role that TikTok plays in promoting it and the fact that more

by talking about 2022 Social Media Trends.

and more apps will adapt to try to imitate TikTok, as Instagram has already

46

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


THE MARKETING CORNER

done with Reels.

fact, UGC is an effective way to sell on social media as they generate trust

Today, we can say that this trend has been confirmed and shows no

in the brand, while increasing engagement.

signs of dying out, especially since TikTok is launching further innovations,

However, if on the one hand social networks have become the heart of

including the e-commerce aspect, new monetization models and

shopping, on the other, brands must commit to offering, through social

#TikTokResumes, a new feature that will allow users to upload their CV

media, a punctual and efficient customer service.

and apply for a job directly through the platform. The hashtag launched to

In fact, consumers, tired of waiting, have discovered that the customer

promote the initiative is already attracting the attention of younger people

service provided via social media is immediate, convenient and effective,

who will surely use their creativity to apply and stand out in the eyes of

and they prefer it: in a Nielsen survey commissioned by Facebook, 64% of

employers.

people said they prefer to send messages rather than calling a company.

Therefore, what we will see will be an even more widespread

The pressure on companies to adapt to as many digital support channels

dissemination of TikTok-style content, not only on TikTok itself but also

as possible is therefore skyrocketing.

on all other platforms (as it already happens, to the point that Instagram

But it’s not just customers who expect their needs to be met on social

has come to penalize the content reposted directly with the TikTok

media: some regulatory bodies, such as the Australian Securities and

watermark). For this reason, other apps will adapt to host similar content,

Investments Commission, are starting to require organizations to provide

while inspiring users to create it.

support through customer-preferred channels.

Therefore, if our target is on TikTok, it’s more important than ever to follow

In this context, it is also important to remember another factor: our

this trend, abandoning the more traditional forms of communication and

customers don’t make the distinction between customer service,

embracing new formats but without distorting the brand.

marketing or sales team. For them, every interaction is simply an

The consequence of the success of TikTok-style content is also clearly

experience with the brand. It is therefore important to ensure that the

visible at the advertising level: despite the fact that we come from reduced

various teams work in tandem and communicate without constraints, so

budget times, the largest increases in advertising spending compared

that they can easily and immediately deal with requests and mitigate any

to last year were assigned to TikTok, Pinterest and Snapchat. Marketers

problem.

are shifting their assets to where they can make the most impact, and marketing mix before.

The way we advertise and manage the privacy narrative will change

Therefore, our creativity must not fail when it comes to advertising:

At the time of the war on cookies and the tracking policies adopted so

brands that want to stand out in 2022 will have to commit to creating ads

far, learning to balance the need to offer personalized services and the

that reflect and enrich the experience offered by each social network.

need to obtain the consent of users, acting in accordance with the new

To keep up with all these changes, it is clear that we will have to accept the

regulations, will be of primary importance.

need of experimenting, without focusing too much on the metrics, making

As we have already seen when talking about digital marketing trends of

mistakes and trying again and again.

2021, people are, in fact, worried about their online privacy. However,

increasingly, this is happening on platforms that weren’t prioritized in the

such concerns do not seem to translate into a more conscious behaviour

Social Selling will take on a leading role

for the time being. This was demonstrated by an experiment by

Thanks to the collaboration with Shopify, Instagram introduced Shoppable

Security.org, which added the right to name the user’s first child in the

Posts in 2018, which allow users to purchase products without leaving the

consent form. 98% of users agreed to.

app, with a simple touch. Since then, the goal of the main social apps has

The truth is that many times the language of privacy policies is too

been to offer users the ability to buy quickly and easily, without redirecting

complicated and verbose and people have neither the time nor the desire

to other sites.

to read them. However, with privacy policies changing and the need

For this reason, on the eve of 2022, brands that sell online should

to address user concerns, brands will need to take matters into their

re-evaluate their sales funnel and consider taking advantage of social

own hands and set a strategy. This presents a challenge as well as an

selling opportunities through posts, stories, reels, etc. Clearly, the rule

opportunity: that of rewriting the privacy narrative, using a more concise

always applies that the easier and faster the purchase process, the more

and direct language and building a relationship of real trust with users.

chances we will have of concluding the sale. Furthermore, it will also

One of the ways to do this and advertise our brand at the same time is

be important to provide support through chatbots and verify through

to recognize that consumers trust other consumers more than brands.

analysis tools that the costumer journey is as smooth as possible.

Therefore, UGCs must once again be part of our strategy to address both

To be successful in social selling we will have to speak the same language

growing user concerns and the fact that advertising is changing.

as users and in particular that of our audience, by creating content that

In addition to user-generated content, we can also take advantage of

attracts their attention but also by exploiting user-generated content. In

influencer marketing, which to date remains one of the promotional

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

47


forms with the highest return on investment, capable of generating high

The metaverse will be a hybrid of today’s online social experiences, which

engagement rates without being invasive, and increasing the credibility of

will embrace both a three-dimensional and physical world, allowing

a brand.

users to live different immersive experiences, from social connection, to entertainment, to games, to fitness, to work, to education, right up to

The metaverse will be the future

business.

Driven by the world of gaming, the metaverse is a fusion of the physical

Considering that Zuckerberg owns some of the most widely used social

world, augmented reality and virtual and, according to Mark Zuckerberg

apps in the world today, it is clear that this new project will have significant

(and many others), it will be the future.

proportions and consequences for anyone who does online marketing.

Many brands, from fashion to automotive, have already exploited the metaverse to launch their products, offering the public an immersive

Having said that, we must always keep in mind that projects for their own

experience and investing heavily in this new technological challenge.

sake lead nowhere: our audience will not be interested in our brand,

Then we have the recent launch of Meta, which brings together all the

our platform or our space if what we have built does not actually meet

apps and technologies owned by Zuckerberg under a new corporate

their actual needs nor their interests. So, let’s not get carried away by the

brand. Meta’s goal, as stated in the official press release, will be to bring

enthusiasm of these new digital and technological revolutions but, before

the metaverse to life and help people connect, find communities and

diving into the metaverse and the infinite possibilities it offers, let’s take

grow businesses.

the right time to reflect and gather information on consumers.

48

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings


THE MARKETING CORNER

Brands will need to be attentive to social issues

connect, share and get closer to the discussions they care about the

Environmental sustainability was perhaps the first major topic of social

most. Last year we wrote about how brands focused on listening and

interest to be embraced also at a corporate level. To such an extent that

finding their place within the conversation before making their voices

in some cases we speak of greenwashing, a term that indicates all those

heard online. This year, we need to take it one step further: not only do

marketing and communication strategies aimed at presenting a company

we need to listen to what people say within the online communities we

as eco-sustainable when in reality it is not.

address, but also actively support the content creators who bring those

Today, however, the time for bla bla bla – to put it as Greta Thunberg did

communities to life. This means building trust by investing in partner

– is over: whether we are talking about environmental sustainability, racial

creators, taking the lead in distributing their content and amplifying

issues or gender inclusiveness, brands will have to have an opinion on it

it across our channels. So, instead of trying to create a community

because that is what consumers expect and what they will be judged for.

from scratch – which requires time and money that are not always

Having said that, one does not become socially aware and inclusive

available – it is better to introduce ourselves and tap into existing creator

overnight. You need to devote time, research and commitment to

communities to learn more about our customers, simplify content

seriously and sincerely engage not only your audience on the issues of

creation and increase brand awareness and affinity.

greatest interest but also the entire company. Therefore, let’s not imitate the popular sentiment to keep our audience engaged but let’s strive to be a truly inclusive and aware brand.

What do you think of these trends? Scan the code to read this article in our blog and leave your comment on it. ‹

The power (and potential) of communities will grow As mentioned, the line between digital and physical is becoming more and more blurred and younger generations are driving this change, by networking and sharing online. All social networks are moving in this direction, just think of the aforementioned metaverse but also of the new Twitter Communities, which aims to offer people a virtual place to

© Gucci Garden

Gucci Garden, hosted on the Roblox gaming platform, allows users to stroll through the virtual garden designed by Gucci and to try and buy digital Gucci items.

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

49


TRADE FAIRS & CONFERENCES

MP

MEDIA PARTNERSHIP - ipcm® is present with own booth or press corner SPECIALIZED EVENT FOR SURFACE TREATMENTS INDUSTRY

The present exhibitions calendar offers a general indication for an advanced planning. Dates are subject to confirmation.

JANUARY 2022 world of concrete

inmex smm india

acetech

maintenance next

Las Vegas, USA

concrete and masonry industry

January 18-20, 2022

www.worldofconcrete.com

Mumbai, India

shipbuilding, machinery and marine technology

January 19-21, 2022

Hyderabad, India January 21-23, 2022

Rotterdam, Netherlands January 25-27, 2022

www.inmex-smm-india.com architecture, construction and engineering www.etacetech.com

asset maintenance www.maintenancenext.nl

FEBRUARY 2022 euromaritime

infra relatiedagen international roofing expo budma

50

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings

Marseille, France February 1-3, 2022

Hardenberg, Netherlands

maritime industry www.euromaritime.fr

civil engineering, road and water construction

February 1-3, 2022

www.infrarelatiedagen.nl

New Orleans, USA

roofing construction and maintenance industry

February 1-3, 2022

www.theroofingexpo.com

Poznań, Poland February 1-4, 2022

construction and architecture www.budma.pl


TRADE FAIRS & CONFERENCES

spe offshore europe

February 1-4, 2022

international builders show

Orlando, USA

building and construction

February 8-10, 2022

www.buildersshow.com

pipeline coating

nais

pumps & valves

worldbuild kyiv canadian concrete expo erbil oil & gas

mro middle east

Aberdeen, UK

Vienna, Austria February 8-10, 2022

Moscow, Russia

offshore industry www.offshore-europe.co.uk

pipeline coating https://www.ami-events.com/event/ fe628802-6a00-4ec4-b6a1-f00b31de54cc civil aviation infrastructures

February 9-10, 2022

www.nais-russia.com

Dortmund, Germany

pumps and valves

February 16-17, 2022

www.pumpsvalves-dortmund.de

Kiev, Ukraine

building and construction

February 16-18, 2022

www.worldbuild-kiev.com.ua

Toronto, Canada

concrete construction industry

February 17-18, 2022

Erbil, Iraq February 17-20, 2022

Dubai, UAE February 22-23, 2022

MP

www.canadianconcreteexpo.com

oil&gas industry www.erbiloilgas.com maintenance, repair, overhaul in the aerospace industry https://mromiddleeast.aviationweek.com

MARCH 2022 AMPP conference & expo pipeline technology conference

San Antonio, USA

corrosion prevention and control

March 6-10, 2022

https://ace.ampp.org/

Berlin, Germany March 7-10, 2022

pipeline technology www.pipeline-conference.com

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

MP MP

51


ZOOM ON EVENTS

Euromaritime 2022 - Marseille Leads the Way in the Blue Economy Euromaritime exhibition, the main trade meeting of the Euromediterranean maritime industry, will take place at Parc Chanot in Marseille (France) from Tuesday 1st to Thursday 3rd February 2022.

F

rance is a leading maritime country thanks to the size of its marine

Marseille and its neighbours Nice, Toulon and Sète, however, have been

territory and the importance and performance of the players in

affected by the fall in ferry and especially cruise passenger traffic. Since

its marine industries. Promoting innovative blue growth, generating

the summer of 2021, there is a noticeable return of activity, taking place

jobs and respecting the environment are all promising prospects of

in a context of improved management of environmental issues thanks to

the maritime sector in France and on the international scene. This is

the simultaneous action of ports, shipowners and local authorities.

the ambition of the 5 edition of the Euromaritime exhibition. For the

In terms of employment, the Marseille-Fos port represents nearly

second consecutive year, Marseille, as the crossroads of Mediterranean

15,000 employees in direct activities and logistics, to which are added

Europe, will be hosting the biennial event for companies from the

15,000 other employees in the industrial-port sectors. Furthermore, the

maritime world in Europe, France and the Mediterranean.

two major ports Toulon and Sète each have a thousand employees.

th

Marseille is today the capital of the French maritime world with

Mediterranean maritime economy: figures from Isemar

the company CMA CGM as its figurehead, whose port and logistics

The Euro Mediterranean Marseille-Fos port, French economy’s gateway

investments are strategic for the national economy. The city of Marseille

to the Mediterranean, recorded a total traffic of 69 million tons in 2020,

is also home to many shipping companies such as Ponant, Marfret,

in the context of the health crisis.

Corsica Linea, la Méridionale, Bourbon and Gazocean. In total, this

1

represents more than 7,000 employees and a large part of the added 1

52

Institut Supérieur d’Économie Maritime.

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings

value of the national maritime sector.


ZOOM ON EVENTS

The ship repair industry in Provence is on an international scale

Euromaritime exhibition

The Chantiers Navals de Marseille work for the biggest names in the

maritime community. Beyond the professional, technical and

cruise and ferry industry. At the same time, a network of French and

prospective issues, the exhibition is a genuine link between the

foreign repairers ensures a prominent place for the repair of mega

different players in the maritime sectors. It helps professionals

yachts in Marseille, La Ciotat and Saint-Mandrier.

access the latest innovations and exchange with the main industrial,

Euromaritime is the meeting place for the French and international

If we add the activities of military shipbuilding and repair in the Var,

institutional and political decision-makers.

close to 7,000 employees work in this sector for the entire South

The conferences, programmed and moderated by the editorial

region. Naval activity and the presence of the international luxury

staff from the weekly magazine Le Marin, will be at the heart of the

yachting industry ensure economic spin-offs of more than € 700

challenges facing the maritime world. On the programme, a wide

million for Provence Alpes Côte d’Azur and Corsica.

range of subjects including global logistical difficulties in a fast-

Marine renewable energies (MRE) are also continuing to develop in

growing market, the challenges of carbon reduction on a global level:

the Mediterranean thanks to floating wind turbine technology, with

are we moving fast enough? Does the European Union risk being

several sites already selected for pilot farms in Fos-sur-Mer and Port La

penalized if it advances more quickly but alone? Is there not a risk of

Nouvelle.

dehumanisation? The growing cyber risk, environmental constraints

This new sustainable maritime energy activity will thus create a major

on shipyards, electrification at the quayside, hydrogen, and the

employment pole in the Occitania region.

construction and refit of yachts at a time of carbon reduction.

In terms of fishing, with an essentially coastal activity, Provence and Occitania play an important role in the national total with 600 to 700

The 5th edition of the Euromaritime exhibition will open its doors for the

fishing vessels and a thousand fishermen each. Finally, the shellfish

second time at Parc Chanot in Marseille on Tuesday 1st February 2022.

industry in Languedoc adds another thousand jobs linked to maritime activities.

For further information: www.euromaritime.fr

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

53


ZOOM ON EVENTS

Another Successful Event from the Leaders of the Energy Industry EMC Conference and Exhibition, the event dedicated to the Eastern Mediterranean Energy Industry, was successfully completed in last November.

T

he Eastern Mediterranean Energy Conference and Exhibition or EMC, was held this year over the 10th-12th of November in Nicosia,

Cyprus. The exhibition welcomed companies operating in the following sectors: Oil&Gas, Midstream and Shipping, Renewables (hydro, solar, wind, geothermal and biomass) and Power, Natural Gas, Energy Transition (hydrogen, biofuels and e-fuel, CCUS). After three days of unmissable discussions, we now know we can stay committed to delivering a cleaner energy future that is equitable and sustainable. EMC 2021 had support from the entire oil & gas and energy value chain, including Ministers from the region. H.E. Natasa Pilides Minister of Energy, Commerce and Industry inaugurated the event in presence welcoming all the stake holders and then walked across the exhibition area together with Prof. Toula Onoufriou, President, Cyprus Hydrocarbons Company, Professor Cyprus University of Technology, Chairman Advisory Board encountering the companies exhibiting. During the conference key messages came from H.E. Costas Kadis, Minister, Ministry of Agriculture, Rural Development and Environment of Cyprus, Republic of Cyprus, H.E. Mrs. Karine Elharrar, Minister of Energy, Republic of Israel and H.E. Dr. Saleh A. Al-Kharabsheh, Minister of Energy and Natural Resources, Hashemite Kingdom of Jordan. The leaders of the region reiterate their support to the Energy entrepreneurs. The exhibition also attracted delegations from China, Egypt, Greece, Italy, Israel, Jordan, France, USA and the Ministry of the Environment and Energy of Greece. Informed insights from a range of influential professionals were presented at the Conference coming from John Charalambides, EVP-MENA Connector Subsea Solutions, Dr. Andreas Poullikkas, Chairman, Cyprus Energy Regulatory Authority, Aristofanis Stefatos, CEO, Hellenic Hydrocarbon Resources Management, Demetris Fessas, Acting Director General, CHC, Romain de La Martinière, Country Chair, TotalEnergies Cyprus, Mr. George Polychroniou, Executive Director, Strategy, Development and Regulatory Affairs, DEPA, Dr Symeon Kassianides, Chairman, Natural Gas Public Company (DEFA/CyGas) just to name a few.

54

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings

© IES Events


ZOOM ON EVENTS Final attendee numbers: • 260 Delegates • 1186 Visitors • 94 Speakers • 88 Sessions • 4 Ministerial Keynotes • 15 Plenary Sessions • 6 Panel Debates • 49 Technical Sessions • 80 Exhibiting Companies from 15 countries including Cyprus, Italy, UK, Belgium, Brazil, Egypt, Greece, U.A.E., Lebanon, Finland, South Africa, Singapore, India, USA, France • 65 B2B Matchmaking Event hybrid event organised by the Cyprus Chamber of Commerce. Countries included Cyprus, Italy, Egypt, UK, UAE, Spain, Israel, Greece, Serbia, Lithuania, and Croatia. EMC 2021 has been the first event of its scale to bring the industry of the Eastern Mediterranean to explore the commercial and technical development of the energy basin. Fueling both localised and wider region interest, leading stakeholders gathered to debate and assess the outlook for both upstream project development and downstream consumer markets. It is no doubt that the Eastern Mediterranean is developing into a cleaner energy hub. Attendees of EMC enjoyed the perfect platform connecting with the region’s leading natural gas, renewables, and hydrocarbon stakeholders, and will be investing in the years to come. © IES Events

The next EMC event will take place again in 2023.

© IES Events

For further information: www.emc-cyprus.com

ipcm® Protective Coatings - 2021 DECEMBER - N. 40

55


ZOOM ON EVENTS

New Venue Announced for the 2022 Global Tank Storage Awards The 5th annual Global Tank Storage Awards returns to Rotterdam in March 2022.

T

he Global Tank Storage Awards returns on 8th March 2022 in

equipment innovations, ports and individual success.

the brand-new venue of the Schiecentrale in Rotterdam, the

“We were absolutely thrilled to be recognised globally by our industry

Netherlands.

peers,” says Fintan Duffy, Managing Director of Re-Gen Robotics, winner

“We have chosen a larger venue for 2022 as we recognise the need for

of the Safety Technology Award at the 2020 Global Tank Storage Awards.

the tank storage industry to network and re-connect after two years,” says

Brand new for 2022 is the Terminal of the Future and the Port of the

Margaret Dunn, publisher of Tank Storage Magazine, which produces

Future categories, which celebrates those terminals and ports that

the Global Tank Storage Awards. “The event is a great opportunity for the

are embracing the digital transformation and preparing for the energy

storage sector to entertain clients and reward colleagues for their hard

transition. The event, which is now a fixture in the global storage

work throughout a challenging year.”

calendar, saw a record number of nominations for this year’s event. The

Tickets to the Awards ceremony include an all-inclusive drinks reception, a

shortlist will be announced in January 2022.

three-course dinner, captivating entertainment, a casino and much more.

Last years winners include: Exolum, Re-Gen Robotics, Shell, Vopak, North

Held after day one of the market-leading StocExpo conference &

Sea Port, Emerson and many more.

exhibition, the Tank Storage Awards recognises those that excel in a range of different categories relating to terminal achievements,

© Tank Storage Magazine

56

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings

For further information: https://tankstorageawards.com


17TH PIPELINE TECHNOLOGY CONFERENCE 7 - 10 MARCH 2022, BERLIN, GERMANY (+ptc REMOTE)

17 PIPELINE TECHNOLOGY CONFERENCE th

7-10 March 2022 #ptcBerlin

Meet the international Pipeline Community www.pipeline-conference.com

DIAMOND SPONSOR

GOLDEN SPONSORS

SILVER SPONSORS


ZOOM ON EVENTS

StocExpo 2022 Unveils a Full, Future-Focused Conference Programme StocExpo, the three-day exhibition and conference for the tank storage industry, will take place 8 – 10 March 2022 at the Rotterdam Ahoy (Netherlands).

S

tocExpo, the largest and longest running international bulk liquid

the benefits of data sharing. A special presentation from Siemens will give

storage event, which returns 8-10 March 2022 at the Rotterdam Ahoy,

delegates a glimpse at the tank terminal of the future, and the day will

has unveiled a jam-packed conference programme exploring the future

close with a focus on robotics, hosted by SPRINT Robotics.

of liquid storage. The conference will take place over all three days of

Expert sessions will be delivered by Eduard Smits, Associate Director of

the event, and will feature some of the bulk liquid storage sector’s best

Accenture, Manoj Mathew, Industry 4.0 leader at Cognizant, Leo Brand,

and brightest exploring the industry’s hottest themes; energy transition,

CIO of Vopak, Mark Noordhoek-Hegt, CEO of Nxtport International, Jelle

digitalisation, robotics, and the future of the industry.

Swanenberg, COO of Smartflow, Sam Reid, CEO of Dearman Systems, Mark Waddington, Director and Senior Consultant of Channoil Consulting,

Day one - Energy Transition (8 March) will explore the tank storage

and Berend R. Paasman, Senior Vice President of DNB Bank ASA.

industry’s role in the future of energy storage, looking at changing capacity requirements by location, future market shares of biofuels, hydrogen

Day three – Hydrogen (10 March) will take a deep dive into large-scale

and LNG, flow battery storage, and geopolitical intrigue impacting the

and underground hydrogen storage and the implication of future

European tank storage sector. Speakers will include Lucia Van Geuns,

technologies for the industry. Speakers will include Catherine Gras, CEO of

Strategic Advisor for Energy at the Hague Centre for Strategic Studies,

Storengy UK & Germany, Dider Wesoly from Geostock Green Storage, and

Guido Dalessi, as well as representatives from some of the sectors biggest

Earl Crochet, owner of Crochet Midstream Consulting.

names, including Evos, HG Storage International, Exolum, Naturgy, Scale

Day three will also see Natalie Gupta, Director Bunkering Value Chain

Gas, Alkion Terminals, Deloitte Consulting, Navigator Terminals, Odfjell,

Partnerships and Economics at Yara International introduce us to world’s

Mabanaft, VTTI and the North Sea Port.

first green ammonia bunkering terminal. There will be a Next-Gen lunchtime session featuring the StocExpo Forty

Day two – Digitalisation & Robotics (9 March) will focus on the

Under 40, and the conference will close with a roundtable discussing

digitalisation of the industry, Industry 4.0, better data management and

Women in Tanks. Rikki Bhachu, Head of Marketing at StocExpo, © Easyfairs

says, “There is a lot in the air for the bulk liquid storage sector right now. With environmental changes, and an ever-shifting political and regulatory environment, on top of new technologies in robotics and digitalisation, it’s a time of great change for the industry. “The conference at StocExpo 2022 has been carefully curated to explore and address all of these issues, one by one, to help companies plan for the future and improve their present-day operations, so the industry as a whole can move forward into the rest of the 20s with confidence. We’re really looking forward to seeing everyone in March.”

For further information:

58

N. 40 - 2021 DECEMBER - ipcm® Protective Coatings

www.stocexpo.com


Tuesday 8 March 2022 | Schiecentrale, Rotterdam

Recognising & rewarding excellence in the Tank Storage community AWARDS | DINNER | AFTER PARTY

Secure your place

Hosted by

Discover the awards | tankstorageawards.com


Protective Coatings ®

Eos Mktg&Communication srl www.eosmarketing.it - info@eosmarketing.it www.myipcm.com - info@ipcm.it

UNIONE COSTRUTTORI IMPIANTI DI FINITURA

Redazione - Sede Legale: Via Pietro Mascagni, 8 - 20811 Cesano Maderno (MB) - Italy Tel. +39.0362.503215 - Fax. +39.0362.1794768

EDITORIAL BOARD

EDITOR IN CHIEF ALESSIA VENTURI venturi@ipcm.it EDITORIAL DIRECTOR M.d.L. PAOLO RAMI paolorami@hotmail.it

Prof. Massimiliano Bestetti

Massimo Cornago

Department of Chemistry, Material and Chemical Engineering, Politecnico of Milan - Section of Applied Chemistry and Physics

Edoardo Tevere

ISSN 2282-1767

Protective Coatings ®

ipcm_PC digital on www.myipcm.com

THE MAGAZINE ABOUT CORROSION CONTROL AND PREVENTION TECHNOLOGIES 2021 - 10th Year | Quarterly - N.40 December

EDITORIAL OFFICE PAOLA GIRALDO giraldo@ipcm.it

Prof. Paolo Gronchi Department of Chemistry, Material and Chemical Engineering, Politecnico of Milan – Chemical Engineering Section

Oil & Gas Specialist

Indipendent Nace inspector lev. 3 QC/QA

Ing. Luca Valentinelli Materials Engineer, PhD, Nace inspector lev.3

MONICA FUMAGALLI fumagalli@ipcm.it MATTEO SOTTI sotti@ipcm.it BARBARA PENNATI pennati@ipcm.it ILARIA PAOLOMELO paolomelo@ipcm.it

SUBSCRIPTION SERVICE

GIORGIA RICCHIUTI segreteria@ipcm.it

Sale only on subscription

GABRIELE LAZZARI redazione@ipcm.it

The international magazine about corrosion control and prevention technologies

MEDIA SALES FRANCESCO STUCCHI stucchi@ipcm.it BARBARA PENNATI pennati@ipcm.it

e-mail: info@ipcm.it

Subscription Rates 2022: Annual subscription printed + digital: EMEA € 60,00 (postage included) Rest of world € 200,00 (fast airmail shipping included) Single copy: € 15,00 EMEA (postage included) - Rest of world (postage excluded)

NICOLE KRAUS kraus@ipcm.it

Back issues: € 30,00 EMEA (postage included) - Rest of world (postage excluded)

SVEN KRAUS sven.kraus@ipcm.it CLAUS GÖRLICH goerlich@ipcm.it GRAPHICS ELISABETTA VENTURI grafico@ipcm.it

Registrazione al Tribunale di Monza N° 4 del 26 Marzo 2012 Eos Mktg&Communication srl è iscritta nel Registro degli Operatori di Comunicazione con il numero 19244 POSTE ITALIANE S.P.A. – SPEDIZIONE IN ABBONAMENTO POSTALE D.L. 353/2003 (CONV. IN L. 27/02/2004 N.46) ART. 1, COMMA 1 LOM/MI/4352

LAYOUT

PRINT

Elisabetta Venturi

JONA SRL

grafico@ipcm.it

www.jonasrl.it

Subscriptions can be made by bank transfer to the following account: Eos Mktg&Communication Srl IBAN IT97F0844033270000000084801 - SWIFT CODE CRCBIT22 or online payment at: www.myipcm.com

It is forbidden to reproduce articles and illustrations of “ipcm® Protective Coatings” without authorization and without mentioning the source. The ideas expressed by the authors do not commit nor magazine nor Eos Mktg&Communication S.r.l and responsibility for what is published is the authors themselves.


­

 ATTEND the biggest maritime tradeshow in Southeast Asia  REUNITE with maritime decision makers  JOIN CONVERSATIONS led by industry leaders

ORGANISED BY

ln the business of building businesses

ENDORSED BY

REGISTER FOR YOUR FREE VISITOR PASS NOW

SUPPORTED BY

HELD IN

GOLD SPONSOR

BAG SPONSOR


GROUP

A century of experience

RIMOR, Cutting-edge solutions in industrial ventilation and surface treatments with its own brand companies CAMIT and TEKIMP

KTL - Cataphoresis system Powder Coating System Cleaning and pretreatment system Zinc Application Lines Liquid coating systems Galvanic and Zinc Coating Systems Via dei Pini, 21/F - 31033 Castelfranco Veneto (TV) - Italy

www.tekimp.it

Sandblasting Paintings Units Painting Booths Suction and Filtration Systems Mobile Tunnels www.camitimpianti.it

RIMOR SRL | Via Luigi Santagata, 43 - 10156 Torino (TO) – Italy Ph. +39 011 2238561 |

i n f o @ r i m o r. e u | w w w. r i m o r. e u

other company of Rimor Group:

www.aeelettromeccanica.com


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.