KSA Consumer Guide 2019

2019 KSA CONSUMER GUIDE

HINTS & TIPS, SERVICES, SUPPLIERS, ADVICE, AND MUCH MORE...

PROUDLY SUPPORTING THE CONSUMER & KITCHEN INDUSTRY FOR OVER 29 YEARS

CONTENTS MEMBER

WELCOME TO THE KSA

2-4

ALIGNING YOUR TASTES AND YOUR BUDGET

8-9

HOW WILL EUROPEAN TRENDS HIT THE SA MARKET…

14 -15

DO YOU KNOW WHAT PRODUCTS YOUR KITCHEN COMPANY IS USING?

18 -19

ARE THERE ITEMS YOU SHOULDN’T STORE IN YOUR KITCHEN CUPBOARDS?

23- 24

KSA CHECKLIST

28

PORCELAIN/SINTERED SURFACING - ALL YOU NEED TO KNOW

31- 33

TO HANDLE OR NOT TO HANDLE?

35- 37

HOW BEST TO USE COLOUR IN THE KITCHEN?

39

PLAYING WITH YOUR BUDGET

42-43

KSA MEMBERS AND SUPPLIERS BY REGION

45- 52

Cover image and plan supplied by Space Interiors - 28 Somerset Square, Rawbone Road, Greenpoint, Cape Town 021 418 1611 | www.spacesolutions.co.za/Space-Interiors PV - KSA 2019.pdf 2 2018/11/15 14:52:32

Thank you to all our other generous members for the use of their various kitchen and industry images.

HIGH GLOSS & SUPER MATT PET BOARDS

Maximum Gloss Surface | Extreme Matt and Soft Surface | Environmentally Friendly and Recyclable Product | Super Scratch Resistant | High Chemical Resistance | High UV Resistance | Delivered with a Protective Film GAUTENG 011 865 2151

Return to Contents Page

CAPE TOWN 021 371 6136

BLOEMFONTEIN 051 434 1179

EAST LONDON 087 354 0696

sales@pearlman.co.za www.pearlman.co.za

WELCOME TO THE KSA The objective of this booklet is to give you valuable information about the Kitchen Specialists Association (KSA) and how it can help you make well-informed choices when looking to purchase a new kitchen.

Thousands of people have kitchen installations completed successfully.

How do they do it? The answer is proper planning – know what you want, what you can afford and use a reputable company.

An important role of the KSA is to protect the rights of the consumer. Because membership of the KSA is voluntary, consumers have peace of mind that by working with a KSA member they are working with a company that has chosen to be held accountable by an objective third party. As such the KSA can only offer the consumer assistance and protection if they choose to work with a registered KSA member and make use of the facilities put in place to afford them protection and security.

The KSA is the only body that exists in South Africa to regulate and support the kitchen industry and its’ clients. As there is no government regulation of the industry the KSA was started in 1989 so that the industry could self-regulate.

The association was started with a fundamental mission and vision: ‘To create a professional and stable trading environment in which the industry can prosper and consumers can enjoy peace of mind.’

‘To be a national organisation, representing the country’s reputable kitchen manufacturers and associated product suppliers with the purpose of offering the public peace of mind by association as well as facilitating solution driven resolutions between members and consumers in areas of dispute.’

The KSA has three main stakeholders: the consumer, the kitchen manufacturer and suppliers to the kitchen industry. The needs of each of these stakeholders is intertwined and as you benefit and assist one, you do so the others.

2

Whatever your budget or specification the KSA has members who can fulfil your brief whether it be DIY, a locally manufactured product or an imported product.

It is vital that, before appointing a company, membership is confirmed on the KSA website.

MEMBER

KSA MEMBERSHIP IS GRANTED IN THREE FIELDS: Kitchen members - companies that manufacture and/or install kitchens - these companies are required to offer a minimum guarantee of one year on their product and installation. They must also have a showroom where you can view the quality of their product.

THE KSA HOLDING ACCOUNT: The KSA Holding account offers a safe place for disputed funds, deposits and final payments. It can be utilised at any time by agreement between both parties and at no cost to the consumer. Use of the holding account is the only way the KSA can afford protection to a customer’s funds.

Supplier members - companies that are affiliated to the kitchen industry by supplying a wide range of products and services to the industry.

Stone & Surface Fabricators - companies that process and fabricate surfacing materials.

By ensuring your kitchen company is using products supplied by a KSA registered supplier or fabricator you increase your safety-net for recourse in a dispute.

The KSA has a strict code of ethics to which all members subscribe. The code covers manufacturing, installation and service standards.

Membership is not easily awarded and members references are screened on their application.

Members must have been trading for a minimum of three years, pass a reference check and be in good standing within the industry. All members must also agree to abide by any ruling handed down by the KSA or risk suspension or expulsion from the association.

Return to Contents Page

This account facilitates a sense of trust between the parties. It gives the kitchen company comfort in knowing that the needed funds are available, while allowing the customer to retain control of the release of those funds. Application forms to utilise the account as well as information on how the account works can be downloaded off the KSA website.

It is an industry standard for kitchen companies to request a 50% deposit on signing of the contract, a further 40% on delivery of carcasses to site. The final 10% is payable on completion of the work and signing off of the job.

3

As an industry body the KSA provides advice and guidance. KSA staff are happy to assist both consumers and industry players with any questions or concerns they may have related to the industry or a new kitchen project.

In the unfortunate event of a dispute arising between a KSA member and their client the incident can be reported by downloading the dispute registration forms from the KSA website.

KSA undertakes to assist with any legitimate complaint that falls within the kitchen’s installation and guarantee period. The KSA’s mediation service aims to provide a fair and equitable resolution to the problem without it having to turn legal.

For further information and a full list of members please visit the KSA website or contact your regional KSA office.

Please visit our web site www.ksa.co.za

T he KSA Team

MEMBER

CONTACT DETAILS:

GAUTENG Tel: 076 411 9638 Fax: 086 551 6981 Email: gauteng@ksa.co.za

KWA-ZULU NATAL Tel: 082 721 5314 Fax: 086 552 1819 Email: kzn@ksa.co.za

CAPE TOWN Tel: 066 487 8564 Fax: 086 673 4898 Email: westerncape@ksa.co.za

4

makeitwonderful.co.za 0861 372 653 | enquiry.fsa@franke.com | www.franke.co.za

C

E B R AT I N

27 YEARS

OF QUALITY SERVICE

STYLISH SOPHISTICATION. TIMELESS ELEGANCE. We do more than kitchens. At Easylife Kitchens we pride ourselves in designing, manufacturing and installing bespoke living spaces for your home. From bedrooms and bathrooms, to studies and kitchens. Speak to our expert designers at one of our 31 showrooms across the country. 2 year kitchen guarantee.

Easylife Kitchens, making life easier since 1992.

Proudly featuring Jo-Ann Strauss, Easylife Kitchens Brand Ambassador.

0861 327 9543 | 0861 EASYLIFE | www.easylifekitchens.co.za

G

EL

custom designed finishing touches In addition to Easylife Kitchens offering you the widest range of styles and finishes for your kitchen, we can also custom design almost any storage solution to suit your individual requirements and specifications.

This includes your home office or study, or perhaps a bar area with matching unit for your flat-screen TV, or even a private home cinema. You may be a wine connoisseur and would like a cellar to be designed for your precious wine collection, or you may wish to extend the flow of your kitchen into the dining room with a matching sideboard. On the other hand, you might have a growing family and need floating shelves in the children’s bedrooms for all the teddy bears or sports equipment.

No matter what your storage requirements are, from bookshelves for the library, cupboards for the braai area, or extra storage in the garage, Easylife Kitchens have the expertise and experience to give you the best advice and assistance.

31 showrooms nationwide.

0861 327 9543 / 0861 EASYLIFE www.easylifekitchens.co.za

ALIGNING YOUR TASTES AND YOUR BUDGET One of the biggest causes of conflict between a customer and a kitchen company is when the client’s tastes and budget do not align. Knowing what you can afford, or being able to afford, or being prepared to pay for what you want, is vitally important for a conflict free kitchen renovation.

Researching finishes and what they cost is an important process. Many consumers pick photos from magazines or Pinterest and tell the kitchen designer that this is what they want. But the reality is that certain budgets do not lend themselves to certain design trends or finishes.

Many kitchens featured on social media focus on the latest materials and design styles. Often the new ‘hot and happening’ materials cost more, and while your heart might tell you that you want duco, veneer and ultra matt Nano technology laminate, your budget might not be able to stretch to it. The job of the designer is then to find alternate, more costs effective ways to give you a similar look. It is important though, that you realise that you are not getting the materials in the picture, and these new options may not react the same way to cleaning, marking and durability. Be open minded and willing to embrace the alternate finishes offered. Have realistic expectations for what can be expected from the materials you are going to use. If you can’t compromise, then wait, save a bit more, and do the kitchen with the materials you really wanted when you have the funds.

8

The kitchen design is also linked strongly to the budget. If you have taken an image of a kitchen which is handleless, has lots of drawers and a lot of drawer and cupboard inserts, you need to have a big budget. There is a huge move ergonomically, to focus on drawers for storage instead of cupboards.

But drawers are costly, especially if you are planning on storage enhancing inserts and soft close runners. Going handleless will also put pressure on your budget as the manufacturing method and hardware is costly.

Many consumers want the fancy design and materials but either can’t afford them, or are not prepared to pay the price for them. The market has a variety of companies all having different expertise.

It is important to remember that high end products and materials require high end specialists to work with them in order for the job to be successful.

Specialised manufacturing and highly trained staff are needed to work with certain design styles and

materials. Because these companies are specialist in their area, they charge accordingly. The big problem arises when consumers approach a more cost-effective company and ask them to work with the high-end materials and hardware in order to save a buck or two. This can only lead to disaster.

If a company does not work with specific materials and hardware regularly, their factory and staff will be unfamiliar with the specifics and technicalities of working with and installing the product. This means that when the kitchen is installed, the required attention to detail and precision is not in place for the materials to look their best or work properly. If you are wanting a high-end kitchen, then save up and go to a company that specialises in high end finishes and design. We are often called to site by

Return to Contents Page

consumers who are disappointed that the company has not produced a kitchen to European standards, and we have to tell them that they got exactly what they paid for. A good kitchen does not come cheap.

Make sure your expectations are aligned with what your selected company can deliver. Their showroom should be a good indicator of this. The consumer should expect the installed product to reflect the quality that is installed in the company’s showroom.

If you do not see a particular style you like, but the sales consultant has assured you they are able to produce this – ask for client referrals and visit these sites to put your mind at ease.

In order to make your dream kitchen a reality, you need to ensure that the company you choose is capable of delivering what you want; that you have come to terms with the limitations of any materials you may opt to work with, and that you are aware what your budget can buy you. This is the only way to avoid disappointment and conflict between yourself and the kitchen company. Every kitchen company specialises in a particular price bracket due to the materials they work with most regularly and the hardware and other products they opt to recommend to their customers. There is a company to accommodate all tastes and budgets. Make sure you find the right realistic fit for you.

9

www. www. www.

L: 021 TEL: 949 021 1776949 1776 TEL: 021 949 1776

.co.za .co.za .co.za

EMAIL: info@joos.co.za EMAIL: info@joos.co.z EMAIL: info@joos.co.za

HOW WILL EUROPEAN TRENDS HIT THE SA MARKET… The trends seen in the South African kitchen industry filter down from what is showcased at Eurocucina, one of the world’s largest kitchen showcases that takes place in Italy. Many of the KSA’s members attended this bi-annual show, which most recently took place in April 2018. While it usually takes one to two years for the SA retail market to embrace the new trends, the fact that key players in the kitchen industry are ready for these new trends, is invaluable.

Eurocucina 2018 showcased many features that were key breakaways from the trends we have become accustomed to in South Africa.

Most specifically, the move from light to dark, and from high gloss to ultra matt. From an aesthetics perspective, there is a definitive move to fully embrace what is organic, tactile and raw. Steel and oxidized metals, wood and marble stood out.

Timbers were definitely focused on; dark wood with linear grain, but in keeping with the shows overall feel for sustainability timber was reflected predominantly in veneers and not solids. The combinations of the dark timber with the change of the colour palette to dark matt shades of grey and blue, highlighted with greens and pale pinks, shows a very clear move away from the traditionally seen Scandinavian inspired light gloss look.

14

Smokey glass was also an interesting incorporation into many designs. Laminates were also strongly showcased.

Continuing the need for texture was the embrace of pattern, particularly with the amount of marble or marble effect surfacing and cladding. In the past we have seen dark cupboards offset with lighter counter-tops, but here, dark was often combined with dark. This heaviness was offset with clever, often 50’s and 60’s inspired, lighting and shadow lines created by setback plinths which allowed the dark colors to look light and weightless. Other than marble or marble effect quartz, there was a general move away from stone as a surfacing material, with most kitchens opting for the slimmer lines of ultra matt laminates like Fenix, Sintered stone or Porcelain surfacing materials. Combining of

surfacing materials was still popular though. Many appliance manufacturers were showcasing their versions of hob burners that get integrated directly into the kitchen surface rather than a traditional drop-in hob.

Technology was a key focus with kitchen companies working closely with appliance manufacturers and tech companies, to make the kitchen an integrated space that facilitates communication within the home and away from it. While we are already seeing kitchens in South Africa being designed to facilitate cordless charging of devices, with plug points that facilitate direct USB point plug-in, the companies at Eurocucina had taken it further, showcasing appliances and technology that interfaced; facilitating shopping list and remote switch-on, all aimed at optimizing our time management and well- being. Voice and gesture activation were the most prevalent.

The kitchen companies had placed as much importance on the people who would be in the kitchen, as the kitchen itself. The well-being of those in the space seemed to have been incorporated into most design elements, with colour psychology being used in the choice of colour palettes, the use

Return to Contents Page

of mood lighting and a strong focus on ergonomics.

The kitchen spaces had also been designed to be more multi-functional and adaptable than before.

There seemed to be a real understanding that the kitchen was no longer just a functional room, but an integrated part of the home. There was effort made to detract from the visual appearance of pure functionality and focus on a look more aligned to elegant furniture and bespoke individual design. As such, integrated appliances, and appliances with variable dĂŠcor panels, were strongly featured.

While sustainability and ‘going green’ has been a key focus of the show for some years now, this literally was a key area for most kitchens displayed in 2018. Where in the past the kitchens had shown green areas with herbs or pot plants, kitchens now housed mini urban farms where homeowners could grow not only their own herbs but vegetables too.

The incorporation of these green spaces not only facilitates access to fresh organic foodstuff, but facilitates a sense of emotional well-being, clean air and environmental awareness.

It will be very interesting to see how the SA market embraces these new trends and puts its own unique twist on them.

15

R E S I D EN T I A L L I F E T I M E WA R R A N T Y

Royal Quartz products are engineered to perfection to produce exceptionally high quality surfaces, which combine superior aesthetics and unsurpassed strength. Being virtually maintenance free, they require no sealing and are highly resistant to scratches and stains, making them the most practical choice for commercial and residential interior applications. Your endless options when it comes to designing your own unique spaces!

Visit our showroom to view a wide variety of over 20 colours of ROYAL QUARTZ & other natural stone.

CALL NOW

031 579 2901 21 Stanhope Place, North Coast Road | info@jamsonstone.co.za | www.jamsonstone.co.za 16

DO YOU KNOW WHAT PRODUCTS YOUR KITCHEN COMPANY IS USING? So, you have selected your kitchen company. The design is right and the price is right, but what do you know about the products and materials the kitchen company will be using to make your dream kitchen?

There are a lot of component parts that go into making a new kitchen – board, hardware, tops, edging and doors. It is important that you know where these component parts are coming from.

Is the supplier reputable? Does the product have a guarantee/warranty? Are the suppliers locally represented? Your kitchen quote should tell you a bit about who is supplying what, but a quote won’t necessarily tell you who has manufactured the board or supplied the edging. It is sound practice to ask for confirmation as to what material is being supplied and from which company.

South Africa is a growing market, and is seen by many international manufacturers as a growth opportunity. As such, there are new products coming into the market all the time; some brought in and represented by the manufacturer 18

themselves, and some by an agent. These products vary vastly in quality and price. Having a variety of products and materials available on the market is not a bad thing. Different people have different budgets, and different kitchen companies focus their expertise on different price brackets. It is logical to assume that the more cost effective your kitchen, the less expensive the products used to make it will be. Unfortunately, you will find unscrupulous companies who will allow you to think your kitchen is being manufactured with high end materials and charge you accordingly, but in reality, they use less expensive materials with shorter or no guarantee. They can do this by avoiding specifics on their quotation. If they have not committed to supplying you a certain level or brand of material and/or hardware, they are protected should you try and contest the materials used.

Our advice would be to ensure that your quotation is as detailed as possible and that you then research the suppliers your kitchen company is using. This will allow you to establish

what recourse or guarantee is offered should the material or product be defective, and where their closest representatives are located. In some cases, particularly with the supply and fabrication of worksurfaces, it can be a good idea to visit both the stone supplier, to view and select a slab, and the fabricator, to understand the do’s and don’ts of the material once installed. In the case of a stone fabricator, you also need to ensure they are registered with the correct industry bodies. In some provinces, stone fabricators are required by law, to be registered with the Building Industry Bargaining Council. Working with an unregistered fabricator could lead to you being fined.

that no matter what price bracket or guarantee the product offers, you are afforded the same KSA assistance should there be a problem with the product or material. All KSA suppliers are required to offer the minimum warranty/guarantee for their type of product as stipulated by the Consumer Protection Act, and all have agreed to work with the KSA and comply with a KSA ruling in the event of a dispute. This undertaking speaks volumes for the supplier as they are choosing to support the kitchen company and the consumer by being held accountable by a third party.

Most important to remember is that if you appoint a KSA kitchen member to manufacture and install your kitchen and they, in turn, use KSA suppliers; the scope of assistance the KSA can offer you in a dispute is far greater. Ensuring you have the greatest scope of protection in place is the best thing you can do for your peace of mind.

We would also recommend that you check to see if the supplier is registered with the KSA. KSA suppliers’ products do not all offer the same price point or guarantees. The KSA has members that cater to all markets. As such, it is important to compare apples with apples and research what the differences are between the various product offerings. What is important to note though, is Return to Contents Page

19

ARE THERE ITEMS YOU SHOULDN’T STORE IN YOUR KITCHEN CUPBOARDS? It may seem strange to you but there are actually some things that it is advisable not to store inside a kitchen cupboard or drawer. We are accustomed to our kitchens being the perfect place to store most things but what if the things we are storing, or how we are storing them, is affecting the longevity and functionality of the kitchen and also potentially putting your family in harm’s way.

Your kitchen hardware, in particular runners and hinges, are one of the most important parts of your kitchen. If you have invested wisely and purchased good quality runners and hinges, they can keep your kitchen operating smoothly for years. Unfortunately, if exposed to the wrong substances even the very best product can develop corrosion.

A second area of concern is your sink, in particular, the underside of it. No one ever thinks to check the underside of their sink for corrosion but we have had reports of sinks actually rusting away from the underside because the wrong items have been stored in the cupboard beneath it. Leaving frozen items to defrost on the drainer of the sink can cause condensation on the underside of the drainer also leading to corrosion.

look old and uncared for. Unfortunately, with less reputable products, both the aesthetics and functionality can be affected.

Other than living in a damp climate near the sea, most corrosion on the underside of sinks, runners and hinges occurs because of how they are looked after and as a result of what is stored in the actual cupboards. As a rule, your runners and hinges should be cleaned with nothing more than water and a soft cloth. Any dirt or build up should be cleaned away as soon as possible so as not to affect the working mechanisms. After cleaning they should be wiped dry. If left damp, the hardware is made even more vulnerable to a reaction with the goods being stored in the cupboard, resulting in rust and corrosion.

The cupboard under the sink is commonly used for the storing of cleaning products and chemicals, but this is probably the worst place for them. Not only is it an easily accessible storage space where children can get their hands on potentially lethal chemicals, but these chemicals and cleaning

Rust, or corrosion, can develop in various ways depending on the type of metal and the conditions it is exposed to. Even top-grade stainless steel can develop spot rust and pitting. With a good quality hinge or runner, it is unlikely that rust like this will affect the actual workings of the product, however it will affect the aesthetics, making the cupboards Return to Contents Page

23

materials can, over time, cause serious damage to the sink, metal fittings, as well as the hinges of the cupboard. The biggest risk products are bleach, acids – like pool acid, drain cleaners, toilet bowl cleaners, hard-water stain-removal products, ammonia-based cleaners, dishwasher salt or tablets and laundry detergent. It would be recommended that all these types of products are rather stored at high level in a laundry or garage. If that is not possible, then ensure that all containers, bottle, bags etc are tightly and properly sealed. If not, place them into a sealable container that is clearly marked as to the contents. When not properly sealed, the fumes from these products can cause corrosion.

It is not only cleaning products that can cause corrosion. You need to give thought to avoiding moisture build up in any cupboard. This is why, when cleaning the interior, you must dry it thoroughly.

You also should avoid putting damp wash cloths, sponges or tea towels back into the cupboard or drawer, and rather wait until they are dry to do so.

Some cooking staples also need to be watched.

Table salt, in any format, and baking powder contain highly corrosive elements that can cause damage.

Believe it or not, the fumes from some spices can, over time, facilitate corrosion too. Any food item preserved in vinegar, like pickles, should be tightly sealed after each use and the lids of vinegars themselves should always be fully and correctly closed. If you are unable to properly close or seal the original packaging then repack into another storage container, or store these items in the refrigerator. This will not only keep them fresh and uncontaminated but protect your hardware too.

24

If you wish to keep your kitchen looking its best, and have no choice but to store items like these in your cupboards and drawers, then it is recommended that every six months or so, the underside of your sink and your hinges are sprayed with a silicone spray then wiped dry, so as to increase their longevity.

Thanks to the following KSA members for their assistance with this article:

LEADERS IN EDGEBANDING: PVC, VENEER, MELAMINE, ACRYLIC, PAINTABLE & ABS PROUD SUPPLIERS OF:

“MATCHED TO

PERFECTION.” WOODGRAIN PVC FOILS

SOLID COLOUR PVC FOILS

METALIC PVC FOILS

HIGH GLOSS PVC FOILS

CONTACT US TODAY FOR A FREE QUOTE: sales@upperedge.co.za | www.upperedge.co.za

JO-BURG 011 865 2847

CAPE TOWN 021 372 2733

DURBAN 031 700 8575

NELSPRUIT 013 757 1250

EAST LONDON PE BLOEMFONTEIN 087 354 0696 041 453 8659 051 434 1072

POLOKWANE 015 298 8017

INSPIRING DECOR’S FROM THE NOVOLAM COLLECTION

OXYDE

TM

This moody decor combines chic simplicity with rich colouring for a bold and stylish finish.

TM

Disclaimer: Please note that whilst every possible effort has been made to ensure that the colour and structural differentiation on examples is accurate between printing and the final products, there will always be a slight variance. Please see a actual sample before making a decision.

EXPLORE THE NEW STUCCO FINISH

Available in Stucco finish

NERO

TM

A more refined take on marble, Nero balances dark colouring with light textures for a more classical look.

Available in Stucco finish

TM

LEATHERWOOD

TM

The subtle woodgrain and refined faded feel of leatherwood give this modern decor a unique style and character.

Available in Stucco finish TM

URBAN STEEL

TM

Urban Steel brings together the electric energy of industrial textures with refined, luxury.

It’s smooth tones and powdery shades offer a softer aesthetic.

Available in Stucco finish

TM

BIANCO

TM

Bianco offers marbled grains combined with a gravel composition for a chic yet coarse, modern finish.

Available in Stucco finish TM

The Novolam Collection celebrates a striking new range of décors, inspired by the foremost global interior design trends and our modern lifestyle. Each unique design is a testament to perfection. Designed for all environments. The Novolam Collection offers polished and versatile contemporary styles, showcasing some of our finest melamine products to date.

For more info please visit: www.sonaearauco.co.za

BASALT

TM

Basalt contrasts beautifully with lighter decors, bringing their textures to life with its smooth appearance and earthy colouring.

Available in Silhouette & Textured finish

TM

COTTON

TM

Cotton is a bright and breezy décor with elaborate textures that create a warm and inviting feel in any living space.

Available in Silhouette & Textured finish

TM

METRO

TM

Exciting textures and patterns bring this décor to life, while dusty greys create a masculine and classy feel.

Available in Textured finish

TM

Disclaimer: Please note that whilst every possible effort has been made to ensure that the colour and structural differentiation on examples is accurate between printing and the final products, there will always be a slight variance. Please see a actual sample before making a decision.

KSA CHECKLIST Your new kitchen is complete – before you sign off the job and make your final payment run through this checklist to ensure the job is completed and ready for you to move in.

Are all doors plumb and all gaps even? (It is perfectly acceptable to have a 2 - 4mm gap between doors) Do all hinges open and close smoothly and relatively silently?

Do all drawers open and close smoothly and are all gaps even? (It is perfectly acceptable to have a 3mm – 6mm gap between drawer fascias).

Check that all other moving parts operate smoothly and silently, and do what they are supposed to do.

Check that all gaps and fillers form symmetrical lines. (Exclusions made when walls and floor are not plumb).

Are all handles fitted securely and are straight / level?

Are all adjustable shelves placed correctly – aligned and level?

Are there any visible gaps that have not been filled?

Have all screws been capped in all carcasses? (It is acceptable to have Hilti screws visible).

Are all cut-outs for services neat and in the correct positions?

Are kick-plates fitted and exposed ends edged?

Have all accessories been fitted and are they operating correctly (Cutlery trays, bins, pull-out larders, pocket doors etc.)?

Are all mitre joins neat and filled correctly?

Are all worktops secured and cut outs sealed (if required)?

Is the sink secured and sealed?

Have all manufacturing marks, glue, overspray and visible dust been cleaned away?

Have all paint or stain touch-ups been attended to?

Are all the carcass edging and door edging in an acceptable state – no raw substrate is exposed to the elements or peeling?

Have you been informed on how to maintain and care for your new kitchen?

Please remember that ALL appliances are to be installed by a qualified electrician / gas installer and all sinks, basins and taps need to be connected by a qualified plumber.

All KSA member kitchens afford you a minimum of a one year guarantee excluding wear and tear or abuse.

Please make sure you download the Care and Maintenance document from the ‘Downloads’ page on our web site www.ksa.co.za so that you will know exactly how to take care of all aspects of your new kitchen.

Enjoy your new kitchen 28

Return to Contents Page

Redefining Surfaces.

Redefining Kitchens.

Homes evolve, they become social spaces in which we do not only cook, but live in.

We have created a resistant and durable material with unlimited designs, to create spaces without labels.

New Dekton

Flooring Dekton Lunar Exterior Dekton Kreta Kitchen Island Dekton Soke & Kreta Slim 4mm

Find out more about the 10 year Dekton warranty, look out inspiration and find resources at www.cosentino.com

TOPS ON TOP Cindy Crawford on Silestone Eternal Calacatta Gold

Discover more at silestone.com | Follow Us F SilestoneSA Feel the new velvety texture

Cosentino SOUTH AFRICA 9 Gerhardus Road, Elandsfontein, JHB, Tel: 010 500 2131 / Cape Town, Tel: 021 385 1866 amkhwanazi@cosentino.com / www.cosentino.com

A product designed by CosentinoÂŽ

COSENTINO SOUTH AFRICA 9 Gerhardus Road, Elandsfontein, JHB, Tel: 010 500 2131 / Cape Town, Tel: 021 385 1866 amkhwanazi@cosentino.com / Follow Us: F SilestoneSA

PORCELAIN /SINTERED SURFACING - ALL YOU NEED TO KNOW Granite and engineered stone have long been the material of choice for countertops, but as trends have begun to demand a cleaner sleeker look, there has been a need for a hard-wearing surfacing material that has similar properties to stone but that can be fabricated in a thinner format. The arrival of porcelain or sintered surfacing onto the market offered a solution.

Sintering has been around for a long time and is most commonly seen in products like porcelain. It is a method whereby natural materials, in powder format, are processed under heat, pressure, or both, to create the desired product. The principle is that the atomic particles of the powdered materials are diffused and bound together through heat, creating one solid piece.

Sintered surfacing may be comparable to porcelain ceramic tiles but no ceramic tile possesses all the characteristics of sintered surfacing – thin, light weight, stain resistant, scratch resistant, chemical and heat resistant.

The reason that the product has such an array of strength is due to the fact that the mineral components are very carefully selected – silica, quartz and feldspars are used to provide hardness, strength and chemical resistance.

Clay can be added to give the product a little more elasticity. Other minerals are used for their pigments, allowing for the material to be available in an array of colours but still homogenous. This means that the colour should be true throughout the material and UV resistant. These minerals are ground far smoother for sintered surfacing than they would be for a tile and only the purest of minerals are used.

POWDER PARTICLES

SINTERED MATERIAL

PORES Return to Contents Page

31

When combined with water this mineral powder becomes a compact. This can be made dense through the exertion of pressure. Around 6,000 – 15,000 psi (pounds per square inch) is exerted on the material. The dense nature of the product makes it almost totally water-proof meaning no sealants are required. The firing process (at just below melting point) then makes the product nonporous. The product is fired for almost two hours, substantially longer than a tile. In essence during this process the particles within the material are fused to one another making them one. During the firing process vitrification or hardening occurs.

It is important to remember that the product is made from 100% natural materials. No resins or hydrocarbons are used to bind the minerals. This makes the product environmentally sensitive which is becoming an exceptionally important quality when specifying a product.

What makes the material suited to kitchen surfacing is its hard wearing, anti-bacterial and anti-mould properties. It is very hygienic so ideally suited to food preparation. It is also resistant to most household chemicals and food stains.

The application for sintered materials is vast.

Because the material is light weight, it is often used for interior and exterior cladding, flooring and decorative elements.

What has particularly attracted designers to making use of it for kitchen surfacing is the fact that it comes in very thin slabs, allowing the designer to achieve the sleek, slender lines that are very much in fashion. At the 2018 Eurocucina expo this was the most commonly used surfacing on display.

While the large slabs can come in 6mm and 12mm thicknesses, it is the 12mm that is recommended for use for a kitchen surface.

It is important that the product is fabricated by someone who has been trained by the supplier and who has the correct tools for the job. The slabs need to be moved, transported and cut in a very particular way to avoid breakage. If the material is not fabricated correctly this will leave cut outs and edges open to cracking and chipping. When used for a kitchen surface it is vital that the carcassing is level. Should there be any more than a 2mm variance over the run of the carcasses, this could compromise the material. It is best that the material is reinforced by a substrate.

This should be a material with the same thermal expansion properties so that the material and the substrate will expand and contract at the same rate facilitating movement and not cracking. There are very specific rules set by the manufacturers about the minimum distances between the material and the sink, the material and the hob and the manner, size and spacing that is allowed between cut-outs.

These must be observed to ensure the integrity of the material is not compromised and guarantees / warranties are not forfeited.

Once successfully installed, sintered surfacing is very low maintenance. No sealing is required, and if cleaned within 16 hours, all stains should be removable. All that is required for cleaning is warm water and a soft cloth with a natural detergent like Sunlight liquid. Wipe the surface and then dry it.

For a more stubborn stain, a non-abrasive cleaner can be used, but then should be wiped away once

32

the stain is gone. While the material is resistant to chemicals it is advisable to keep hydrochloric acid, caustic soda and product containing hydrofluoric acid away from the material.

practiced fabricator. Only make use of someone recommended by the supplier and who has a proven track record of successfully working with a variety of brands of sintered surfacing.

Innovative new products like this are a welcome addition to the industry. In South Africa we follow behind European trends, so the material is only now being embraced in SA, where it has been regularly in use in Europe for some time now. The most vitally important thing to remember, if you are opting for this material, is that you need a skilled and well-

With thanks to the following KSA members for their help with this article:

Find us on @kitchenspecialistsassociation

and The Kitchen Specialists Association

Return to Contents Page

33

34

TO HANDLE OR NOT TO HANDLE? There is a growing trend to move away from having handles on your kitchen units. The current trends are towards a sleek seamless design which cupboard handles detract from. Opting for the handleless look will have an effect on your budget, and there are several ways to achieve the desired effect.

When deciding on handleless design, you need to consider both the door and the hardware supporting it. There are three ways a door can be designed to be handleless:

THE BROKEN EDGE DOOR This door can have almost any finish and is probably the truest form of handleless design. It can be made from melamine or laminate, wrap or duco. Here, a channel (often stainless steel or aluminium) is inserted in the top line of the cabinet or drawer. This creates a space between the top of the drawer or door where your fingers can easily fit to grasp and open it. For wall cabinets the channel is inserted in the cabinets bottom shelf. While with tall cabinets the channel is usually vertically inserted to the side of the unit allowing space for fingers between the two neighbouring units. If done correctly, the channel usually leaves a shadow line that adds a dramatic effect to the cabinetry.

The benefits to this design are that there is minimal handling of the door or drawer itself, so finger marking is kept to a minimum. The design is also hard wearing as most impact is absorbed by the channel. It is advisable that the door manufacturer should profile the radius edges of both the front and back of the doors and drawers Return to Contents Page

as sharp edges will be prone to wear and tear after repeated impact.

The cut outs required in the carcass to facilitate the channel require precise work in order to look and work correctly. As such, the work should only be undertaken by a kitchen manufacturer with experience in this style. It is common practice for the channel only to be cut and fitted once the carcasses have been fitted on site. This helps to ensure a good continuity of the channel from one bank of units to another.

THE FINGER GRIP DOOR Here, a painted rail is inserted onto the door or drawer. The door or drawer itself is actually routtered and shaped to accommodate the rail.

This option can be done with duco and veneer finishes. The advantage here, is that the rail can be customised in colour, either to match or contrast to the door/drawer finish. This is often viewed as the most aesthetically pleasing handleless design, but it does take time to manufacture and install and requires a highly skilled fitter and manufacturer.

THE J GROOVE DOOR This is generally the most cost-effective option and doors and drawers are ordered and fitted as per normal. Here the finger grip is part of the door profile, routtered out of the front of the door/drawer itself. It is important to note that the impact zone on this profile is small and as such doors made from 16mm panels should be treated with caution as they will damage easily. It is also important to note that use of this profile is not easy for everyone and does not fare well with painted finishes. People with large hands or long nails may struggle to get a firm grip on the door to open it. Long nails can, 35

over time, scratch and damage the finish in the finger grip area. It is also possible for water and dirt to collect in the finger grip area compromising the integrity of the finish. It is vital that doors/drawers of this nature are manufactured by a reputable manufacturer to ensure their longevity. When made cheaply, you will quickly see chipping and cracking in the finish around the finger grip area.

Kitchen hardware has also been developed to facilitate a handleless kitchen. Push to open systems are available from most reputable hardware brands. It is important to note that these vary in price and quality, so getting the hardware from a reputable company is essential. This system works with ordinary kitchen doors and drawers and can, in some cases, be added easily to existing fronts. With this system, pressure is applied to a particular area of the door or drawer facilitating the release and opening of it. It must be noted that this system requires a lot of handling of the door and as such, will increase finger marking and the need for cleaning. It is important that the fitter is well trained on fitting this hardware, because if fitted incorrectly, 36

it will cause frustration and not work properly.

Once you have selected the brand of touch to open mechanism you will be using, ensure your fitter is equipped with the required knowledge to install the chosen hardware. Reputable brands will offer the necessary training and often have apps that can be downloaded for additional assistance on site.

Soft-close is another mechanism often sold in tandem with a handleless design. This too can sometimes be added to existing hardware and facilitates the almost silent and soft closing of the doors and drawers when pushed closed. This in turn, lessens the impact and potential wear and tear on the door or drawer.

Electronic systems are fairly new on the South African market. These systems, being latest technology, are fairly costly. These systems can be motion activated and electronic sensors pick up your hand indication in front of the unit as to what must be opened or closed; or they can work through a light touch to the unit you are wishing to open.

Systems like these are particularly useful in lift mechanisms for high level units and for areas like the dustbin or grocery cupboard, where your hands may be full and the use of an elbow or hip can be made to open the unit.

So, while handleless is definitely the look to go with at the moment, you should stop and take a second to consider the cost consequences and whether your kitchen manufacturer has the expertise to make and install the items correctly.

With thanks to the following KSA members for their assistance with this article:

• De

MontFort • DOORS

AFRICA'S LARGEST DECOR DESIGN AND LIFESTYLE EXHIBITION

BOOK YOUR STAND TODAY KSA MEMBERS RECEIVE A 5% DISCOUNT

21 - 24 MARCH 2019

1 - 5 M AY 2 0 1 9

DURBAN EXHIBITION CENTRE

CTICC

7 - 11 AUGUST 2019 GALLAGHER CONVENTION CENTRE

+27 11 549 8300 decorexinfo@reedexpoafrica.co.za www.decorex.co.za

Return to Contents Page

37

IMAGES: CAESARSTONE

feels like home

DESIGNING FOR AFRICA

HOW BEST TO USE COLOUR IN THE KITCHEN? The use of colour, whether it be in interior design, fashion or cosmetics, is a way for an individual to express themselves. It’s no wonder that colour finds its way into the kitchen – the most used room in the home.

Traditionally, kitchens were kept in muted tones to look clean and sterile, but from the 1940’s we started to see subtle and then bold uses of colour.

Over the past sixty years we have seen the use of colour change dramatically. We have seen the rise of bold primary colours as well as pastels in the 50’s and 60’s. Strong naturally based colours like avocado, brown and orange in the 70’s. The 80’s and 90’s saw a move back to more neutral shades using timber and whites or off whites. In more recent years people are wanting to once again use colour to express their taste and personality in the kitchen.

When deciding how to bring colour into the kitchen, it’s important to remember that a wall can easily be repainted, but it’s not so easy to change the colour of your cupboards or counter-tops. If you are certain you want your tops or cupboards to be in a non-neutral colour, then give consideration as to how quickly that colour will date. It is vital that a kitchen has longevity and can be adapted to changes in trends and tastes. Your new kitchen should add value to your property, increasing its resale value. If your kitchen is too bold, many a potential buyer will be unable to see past it or conceive how it can be adapted to their own tastes.

This does not mean you should not be adventurous.

There are colours that can stand the test of time, particularly if combined with a neutral shade or a timber. Give consideration to the durability of the colour and how it shows dirt and finger prints.

It is important to remember that your choice of colour will affect the sense of space. Dark colours absorb light and make a space seem smaller. At the moment dark greys, blues, greens and blacks are popular but should only be used in a space with a lot of natural light, big windows or a skylight; or in a large room that you are looking to make feel cosier.

The use of a dark colour can be very dramatic.

Current trends in Europe see dark walls combined with dark timber cupboards and dark marble effect Return to Contents Page

tops. If opting for this look, make sure you invest well in good lighting for accent, mood and general purposes.

By opting to work with neutral and natural shades, you are making the kitchen more accessible to a wider audience. However, sometimes the lack of colour can make a space seem cold and stark and very large. Sticking with mostly light and neutral shades works very well in a small space. The colours reflect the light rather than absorbing it, increasing the sense of space.

If you are too nervous to add your colour to the actual kitchen units or tops, then your walls are the next best canvass. A feature wall that showcases a bold colour, whether it be dark or pastel, can be a lovely focal point in your kitchen and can accent a particular part of the kitchen assisting with the sense of space and flow. The nice thing about an accent wall colour is that it can be easily changed as trends and your tastes do, and not at an exorbitant price. When selecting your accent colour, remember that colour affects mood. Reds, oranges and yellows generate warmth, energy and a cosy feeling. While greens, blues and mauves tend to give a relaxed, cool and calm feeling. Which ever colour combinations you opt for, it is vital that the correct paint is used. A kitchen generates a lot of steam and grease. Speciality paints designed for kitchens and bathrooms are available. These are hard wearing, withstand moisture and can be cleaned should you have to scrub them down.

The final way to bring that splash of colour to the kitchen is by how you ‘dress’ it. Make use of colourful accessories and appliances to express your love of colour. You can opt for a theme of one bold colour such as a red or a pastel blue or you can combine colours like black and silver or bronze.

Express your colour tastes wisely. Remember, you may have to live with this choice for some time and you would hate your passion for colour to be the reason that you don’t get your asking price when you one day come to selling your home.

With thanks to Plascon for their assistance with this article.

39

Quality, Design and Innovation Liebherr built-in Wine and Beverage Coolers, provide a compact storage solution, unique to Liebherr.

Whether in a large kitchen or part of a bar, the pair integrate perfectly into your furnishings. Your wine and beverage collections can be magnificently presented with soft lighting, and at the perfect temperatures. www.liebherr-appliances.co.za

Distributed in Southern Africa by Liebherr-Africa (Pty) Limited Vlakfontein Road, Fulcrum Industrial, Springs, Gauteng Tel: 011 365 2561/2/3 Fax: 086 674 9628

PLAYING WITH YOUR BUDGET When we ask people what their budget is for their new kitchen, they tend to look at us slightly confused and say they have no idea. But, having a budget is vital.

It is true that there are no real guidelines for how much a kitchen will cost you. It all depends on the size, materials used and layout. You can get a kitchen for R50 000 and a kitchen for R550 000.

This is why it is vital for the kitchen designer to know what you are prepared to spend on the project, so that they have an idea of what restrictions are in place when it comes to design parameters and material selection.

It is often a good idea to tell your kitchen designer that they have between ‘amount A’ and ‘amount B’ to work with. This gives them aAppliances little flexibility. They & Sinks can put two options together for you – one using Carpentry the lower amount and another using the full budget. & Trade You can then look at what you like from the more expensive option and pull those key features into your design but leaving out those costly items that Surfacing may not be necessary. This way, you get a kitchen with the bells and whistles that you really want, but that also does notHardware break the&back of your budget.

Accessories

Traditionally it is recommended you allocate your budget as follows:

Appliances & Sinks 20%

Surfacing

42

Hardware & Accessories 10%

20% 50%

Carpentry & Trade

But this is just a starting place and is not set in stone. When you break your budget up into bite size chunks like this, it allows you to identify the key areas in the kitchen and where you would rather spend your money. This excludes any additional trades that are linked to renovations, such as electricians, plumbers, builders etc.

To help you in the process it is a good idea to give some thought to two things: 1) Why am I doing this project?

2) What are the things I absolutely have to have in this new kitchen?

With question one you are helping to identify if the investment is for you or for someone else. If you are not going to be using this kitchen yourself, then taking the time to identify the key areas and allocate the spend appropriately is not really that necessary – unless the special needs of an end user who is physically disabled needs to be considered. But, if this kitchen is a dream kitchen revamp, then it is vital that you take the time to ensure it will fulfill those dreams; and to do this you need to understand where and how to spend your budget.

Question two will help you identify those areas where you would be willing to spend a little bit more.

If, for example, you have always wanted engineered stone tops, or a gas/electric freestanding cooker, or a pull-out pantry; then these items must appear on your ‘must have’ list. This list will help the kitchen designer to see if she needs to adjust the customary budget split, giving a little more to one area and a little less to another.

A good example would be a scenario where the client already had appliances in good condition which they were happy to reuse. This would free

up 20% of the budget. If the client then wanted stone tops and additional hardware accessories, this ‘freed-up’ 20% could be shared between the hardware and surfacing budgets to ensure the client was getting exactly what they wanted.

Your carpentry and trade make up half of your budget. In order to make this part of your budget work, your kitchen designer needs a good brief so that they can make sure they are using your money to its full advantage. For example, if your budget is small but your kitchen is fairly large the kitchen designer will be able to ascertain that when she designs, she will need to use less drawers and more 1200cm carcasses. This is because the 1200mm carcass with two 600mm doors is the most costeffective cabinet to make. So too, she knows that drawers are more costly to make because they use more material and hardware.

Your designer will also be able to ascertain what finish is best suited to your budget. While we

Return to Contents Page

might all love the slick finishes of duco and veneer, they are not suited to everyone’s budgets. A good kitchen designer will be able to adapt what you are looking for aesthetically into materials more viable for your budget, such as melamine and PVC foil wrap. Remember, don’t turn your nose up at a material until you have seen it used.

Perhaps the most important things to remember with your budget, is that no matter how much you can afford to spend on your new kitchen, you are entitled to the best kitchen that your budget can buy. Don’t be fooled into believing that two quotes varying by R40 000 are giving you the same thing.

Make sure that your designer is quoting you on good reputable materials and products that have a guarantee or warranty, and that come from a reputable supplier. Remember a kitchen is an investment in your home and needs to last you for at least 15 – 20 years.

43

44

KSA Members and Suppliers by Region PLEASE NOTE: This list was accurate at the time of going to print. Please confirm all memberships on the KSA web site - www.ksa.co.za

GAUTENG - REGIONAL KITCHEN MEMBERS Curves and Bevels Designer Kitchens (011) 476 1526 | www.curvesandbevels.co.za Curves and Bevels Designer Kitchens have mastered the art of the curve, taking pride in being industry specialists of curved cabinetry and supplying a curved product known for its superior quality. We offer bespoke kitchens that are unlimited in design and include organic, natural and curved forms.

Diva Cucine (011) 787 1999 | www.divacucine.co.za A COLOMBINI CASA mono brand store entirely driven by the latest Italian trends and designs. Our team offer expert design advice and place great value on providing a quality experience for clients from inception to handover.

Easylife Kitchens 0861 327 95433 / 0861 EASYLIFE | www.easylifekitchens.co.za Easylife Kitchens manufacture a large range of quality kitchens designed with practicality and integrity to suit your individual lifestyle. Visit one of our 31 showrooms to view the .

The exacting standard of our factory made product combined with personal service delivered by each of our owner-run stores, ensures constant quality and unique design.

GAUTENG BRANCHES: Alberton/JHB South 011 680 6184, Boksburg 011 823 1619, Centurion 012 653 1318, Edenvale 011 453 8475, Faerie Glen 012 991 4819, Fourways 011 467 1201, Greenstone 010 110 1407, Illovo 011 268 6420, Kyalami 011 022 6000, Morningside 011 262 5896, Northriding 011 704 0057, Randburg 011 791 6810, Ruimsig 011 958 1526, Vanderbijlpark 016 981 0045, Waterkloof 012 346 0951, Zambesi 012 940 8470

Martin Meyer Kitchens (083) 236 8638 | www.mmkitchens.co.za As one of the longest standing kitchen manufacturers in South Africa, we focus on quality cabinetry at a reasonable price.

We offer a full house cabinetry service from Kitchens to bars, bedrooms, and bathroom vanities.

OPTIMA Kitchens +27 (0)11 792 1216/7 | www.optimakitchens.co.za Family owned and founded in 1991, Optima Kitchens specialises in high-end Kitchens, Built-in Cupboards, Vanities, Studies, Bars and specialised built in furniture.

Optima is the most trusted name in the building industry and proud members of the KSA since 1998. We are Different by Design.

Totem Kitchens and Cupboards (011) 465 2088 | www.totemdesigns.co.za From design through to installation. Totem sets the standard for expertly crafted kitchens, built-in cupboards, bars and vanities.

Bayberry Kitchens blu-line Creative Shop Cupboard Craft CHC Kitchens Cupboard Value Pretoria Easylife Export – C & G International Easylife Kitchens – Management Eazy Way Kitchens & Boards Midrand Eurofit Kitchens

(082) 579 7956 (086) 054 8464 (010) 597 0953 (016) 427 1116 (011) 792 0093 (012) 327 2666 (011) 303 7110 (011) 792 9047/8/9 (011) 315 2373 (011) 022 8005/6/7

www.bayberry.co.za www.blu-line.co.za www.creativeshopfitters.co.za www.cupboardcraft.co.za www.chckitchens.co.za www.cupboardvaluepta.co.za www.cg.co.za www.easylifekitchens.co.za www.eazywaykitchens.co.za www.eurofit.co.za

Fineline Mirror Doors Fit Out Kitchens Galloway Woodworks Enterprises Linear Concepts M & R Kitchens (Pty) Ltd Palmin Kitchens ProReno Kitchens Retha’s Kitchens Sariga Designer Kitchens Sembel-it Simons Kitchens Slavin & Co Sterlings Cucine – Faerie Glen Sterlings Cucine – Fourways The Cupboard People – Robertsham The Kitchen Studio – Midrand The Kitchen Studio – Randburg

(011) 477 5408 (013) 656 2236 (011) 979 3187 (011) 262 4395 (012) 668 1665 (012) 666 8705 (012) 644 2113 (012) 543 2148 (011) 658 1222 (011) 465 2835 (011) 954 6042 (011) 786 2032 (012) 998 6713 (011) 467 7525 (011) 433 3534 (011) 312 4060 (011) 781 4888

www.finelinesolutions.co.za www.fitoutkitchens.co.za www.gallowaywoodworks.co.za www.linearconcepts.co.za www.mrkitchens.co.za www.palmin.co.za www.proreno.co.za www.rethaskitchens.co.za www.sariga.co.za www.sembel-it.co.za www.simonskitchens.co.za www.slavin.co.za www.sterlings.co.za www.sterlings.co.za www.cupboardpeople.co.za www.kitchenstudio.com www.kitchenstudio.com

(011) 222 8300 (011) 279 3500 (011) 664 7780 (011) 392 3059 (012) 809 8927 (011) 793 7239 (011) 435 1115 (011) 473 0119 (012) 643 0515 (011) 392 1655 (011) 312 5038 (012) 666 7773 (012) 802 1475

www.austro.co.za www.devindoors.co.za www.dezignadoor.co.za www.gapkitchens.co.za www.juststone.co.za craig@kitchencraft.co.za www.mnnfittings.co.za www.morrells.za.com www.rem-sa.co.za www.senosa.com www.tilegallery.co.za www.elba.co.za www.woodatease.co.za

(012) 653 5916

www.prostone.co.za

GAUTENG - REGIONAL SUPPLIERS Boardmart (010) 350 0801 | www.boardmart.co.za Established in 2016, we have built a reputation for providing a higher level of service and quality, supplying a wide variety of wood-based products, specialising in cutting and edging.

Dezign-A-Door (011) 664 7780 | www.dezignadoor.co.za At Dezign A Door we don’t do ordinary. We’re a brand that’s all about style, quality craftsmanship and affordability - and for over 20 years we have served the kitchen industry with pride. Our doors enhance and add value to homes – ensuring people love where they live.

Grass Furniture Fittings 011 801 9500 | www.grass.co.za GRASS is one of the world’s leading furniture fitting manufacturers. We pride ourselves on our innovation, quality and level of customer service. Trading in South Africa for over 30 years and are specialists when it comes to hinge and drawer slide solutions for your kitchen, bedroom, vanity and furniture piece.

Austro – Machines, Tooling, Edging & Technical Support Devin Cabinet Doors cc Dezign-A-Door GAP Compact Kitchen Units Just Stone – Natural Bulk Supply – Gauteng Kitchencraft M & N Fittings (Pty) Ltd Morrells Wood Finishes Round Equipment & Machines (PTY) Ltd (REM) Seno SA The Tile Gallery Totai Gas (Elba Appliances South Africa) Wood@Ease

GAUTENG - STONE FABRICATORS ProStone

Stone Art Stone on Time Tectonic Stone

(012) 324 7222 (010) 593 9072 (011) 316 6409

www.stoneartgq.co.za carlos@stoneontime.co.za www.tectonicstone.co.za

KWA-ZULU NATAL - REGIONAL KITCHEN MEMBERS Amazing Interiors AR Cupboards Ashcraft Interiors Built In Cupboard Centre Cole’s Kitchens – Amanzimtoti Cole’s Kitchens – Margate Crestwood Kitchens Cupboard Value – Amanzimtoti Cupboard Value – Ballito Cupboard Value – Morningside Cupboard Value – Manaba Cupboard Value – Cato Ridge Showroom & Factory Exotic Kitchens Expert Kitchens Kitchen Flair Kitchen Pro KZN Kitchen Spectrum – Chatsworth Kitchen Spectrum – Park Rynie Southern Kitchens – Ballito Southern Kitchens – Pinetown The Kitchen Studio – Mobeni The Kitchen Studio – Pinetown The Kitchen Studio – Umhlanga Woodtrends

(031) 791 0169 (031) 506 1035 (031) 577 6878 (033) 345 3600 (031) 903 6413 (039) 312 0650 (031) 765 4260 (031) 903 2539 (032) 946 3116 (031) 301 0244 (039) 312 0169 (031) 782 1070 (031) 579 3800 (031) 500 8648 (033) 387 1310 (031) 569 2046 (031) 401 9430 (039) 978 1554 (084) 510 9434 (031) 705 3888 (031) 462 7722 (031) 709 6263 (031) 566 3412 (031) 584 7527

www.amazinginteriors.co.za www.arcupboards.co.za www.ashcraftinteriors.co.za www.bicc.co.za www.coleskitchens.co.za www.coleskitchens.co.za www.crestwoodkitchens.co.za www.cupboardvalue.co.za www.cupboardvalue.co.za www.cupboardvalue.co.za www.cupboardvalue.co.za www.cupboardvalue.co.za www.exotickitchens.co.za www.expertkitchens.co.za www.kitchenflair.co.za www.kitchenprokzn.co.za www.kitchenspectrum.com www.kitchenspectrum.com www.southernkitchens.co.za www.southernkitchens.co.za www.kitchenstudio.com www.kitchenstudio.com www.kitchenstudio.com www.woodtrends.co.za

KWA-ZULU NATAL - REGIONAL SUPPLIERS KZN Boards 031 468 5320 | www.kznboards.com KZN Boards is the largest importer of the finest European board products from Germany, ltaly and Spain. Our large range includes High Gloss Acrylic, Textured and Deep Embossed Boards. Services include PVC wrap doors, full sheets and cut to size. We offer the industries highest standard of edging quality, with zero glue lines and guaranteed.

KWA-ZULU NATAL - STONE FABRICATORS Jamson Stone Corporation South Coast Granite The Granite Studio

(031) 579 2901 (039) 317 2522 (031) 462 7722

www.jamsonstone.co.za www.southcoastgranite.co.za www.kitchenstudio.com

WESTERN CAPE - REGIONAL KITCHEN MEMBERS Easylife Kitchens 0861 327 95433 / 0861 EASYLIFE | www.easylifekitchens.co.za Easylife Kitchens manufacture a large range of quality kitchens designed with practicality and integrity to suit your individual lifestyle. Visit one of our 31 showrooms to view the .

The exacting standard of our factory made product combined with personal service delivered by each of our owner-run stores, ensures constant quality and unique design.

WESTERN CAPE BRANCHES: City Bowl 021 424 2010, Kenilworth 021 762 7998, Hermanus 028 312 1813, Paarl 021 863 0566, Somerset West 021 851 2850, Stellenbosch 021 882 8948, Table View 021 554 2225, Tokai 021 713 0206, Tygervalley 021 910 4578

The Kitchen & Cupboard Factory (021) 852 1895 | www.kitchenandcupboard.co.za The Kitchen & Cupboard Factory is an established Western Cape manufacturer of quality kitchens and built-in cupboards.

Founded in 1996, the company enjoys a solid reputation built on dedicated customer service, trusted advice and craftsmanship.

Alpine German Kitchens / Poggenpohl SA Andy de Klerk Cabinet Works Conti Kitchens Easylife Kitchens – Management Franco & Son Woodwork cc Gardner Interior Concepts Joos Joiners (Pty) Ltd Morris & van der Watt Nexus Int Quantum Leap Designs Spotlight Joinery Space Interiors The Kitchen Studio Top Living Interiors Tosca Kitchens

(021) 422 2373 (021) 422 3830 (021) 783 2997 (021) 951 8995 (021) 975 2378 (021) 511 2105 (021) 949 1776 (022) 492 3520 (021) 982 4525 (021) 905 7221 (021) 762 9253 (021) 418 1611 (021) 510 8130 (021) 914 3240 (021) 981 8834

www.agk.co.za www.cabinetworks.co.za www.contikitchenscapetown.co.za www.easylifekitchens.co.za www.francoandsonwoodwork.co.za www.gardint.co.za www.joos.co.za www.mvdwkitchens.co.za www.nexusinteriors.co.za www.quantumleapdesigns.co.za www.spotlightjoinery.co.za www.spacesolutions.co.za/space-interiors www.kitchenstudio.com www.topliving.co.za www.toscakitchens.co.za

WESTERN CAPE - REGIONAL SUPPLIERS De MontFort Doors (021) 593 1524 | www.demontfortdoors.co.za At De Montfort Doors we believe in choice. As a dedicated supplier of painted cabinet doors and accessories we utilise 35 years of product knowledge to offer the widest range of profiles and finishes available. Satin, High Gloss, Techniques and Hand Painted options complete our extensive range.

• De

MontFort • DOORS

Grass Furniture Fittings 021 529 8040 | www.grass.co.za GRASS is one of the world’s leading furniture fitting manufacturers. We pride ourselves on our innovation, quality and level of customer service. Trading in South Africa for over 30 years and are specialists when it comes to hinge and drawer slide solutions for your kitchen, bedroom, vanity and furniture piece.

Loubser Wood Components 021 982 4979 | www.lwc.co.za Loubser Wood Components is recognised by many as their first choice industry supplier of made to measure cabinet components and complete assembled cabinets, ready for installation. We specialise in solid wood, veneer, MDF and other materials.

We create reliable value through craftsmanship, experience and technology.

Eurafrican Industrial Agencies CC Lansdowne Boards Simply Cabinet Doors

WESTERN CAPE - STONE FABRICATORS Granite Projects 021 905 3323 | www.graniteprojects.co.za Specialist in cutting and designing of Engineered/Quartz Stone, Natural Granite, Marble, Sintered Porcelain, and Memorial Stones.

In Collaboration with Legacy Quartz, Caesarstone, Silestone, Dekton, ProQuartz, Vicostone and various other brands.

(021) 511 3925 (021) 797 8976 (021) 949 7771

www.eurafrican.co.za www.lansdowneboards.co.za www.simplydoors.co.za

Du Toit’s Granite Infin8 Surfacing Rock & Stone Sangengalo World of Marble & Granite

(021) 982 0603 (021) 510 0572 (021) 845 4310 (021) 905 7786 (021) 447 6161

www.dutoitsgranite.co.za www.i8s.co.za www.rockandstone.co.za www.ske.co.za www.womag.co.za

EASTERN CAPE & GARDEN ROUTE - REGIONAL COUNTRY KITCHEN MEMBERS* Easylife Kitchens 0861 327 95433 / 0861 EASYLIFE | www.easylifekitchens.co.za Easylife Kitchens manufacture a large range of quality kitchens designed with practicality and integrity to suit your individual lifestyle. Visit one of our 31 showrooms to view the .

The exacting standard of our factory made product combined with personal service delivered by each of our owner-run stores, ensures constant quality and unique design.

EASTERN CAPE & GARDEN ROUTE BRANCHES: George 044 871 5285, Port Elizabeth 041 508 5300

The Cabinet Company

(042) 293 1748

www.thecabinetco.co.za

OTHER REGIONS - COUNTRY KITCHEN MEMBERS* Easylife Kitchens 0861 327 95433 / 0861 EASYLIFE | www.easylifekitchens.co.za Easylife Kitchens manufacture a large range of quality kitchens designed with practicality and integrity to suit your individual lifestyle. Visit one of our 31 showrooms to view the .

The exacting standard of our factory made product combined with personal service delivered by each of our owner-run stores, ensures constant quality and unique design.

OTHER REGIONS BRANCHES: Middelburg 013 244 1640, Polokwane 015 297 6000, Nelspruit 013 755 1495

OTHER REGIONS - SUPPLIERS Just Stone – Natural Bulk Supply – Mpumalanga Just Stone – Natural Bulk Supply – Limpopo

(013) 758 2277 (015) 298 8197

NATIONAL SUPPLIERS Citiwood www.citiwood.co.za Citiwood is a bulk supplier and distributor of boards. We never get ‘board’ with service.

We never get ‘board’ with customers. We believe in more than just selling board. We go out of way to understand our customers, so we can service their needs.

Western Cape 021 930 5923, Kwa-Zulu Natal 031 579 2292, Gauteng 011 622 9360

Compusoft South Africa (Pty) Ltd. (016) 428 4018 | www.compusoftgroup.com The professional standard for designing interiors.

See our full range of marketing, design and quoting solutions available.

Cosentino South Africa (Pty) Ltd (010) 500 2131 | www.cosentino.com/en-za Cosentino produces and distributes high value innovative surfaces: Silestone® and Dekton® for the world of design and architecture. It works together with its clients and partners to provide solutions that offer design and value, and inspire the life of many people. Cosentino - for technologically advanced surfaces that allow the creation of unique environment and designs for the home and public spaces.

Johannesburg 010 500 2131, Cape Town 021 385 1866

*Country Kitchen Members do not qualify for site inspections or site visits.

www.homeconcept.co.za www.homeconcept.co.za

Electrolux / AEG / Kwikot 011 897 4600 | www.aeg.co.za / www.kwikot.com Kwikot and AEG are part of the Electrolux Group Kwikot is a supplier of a range of stainless steel domestic kitchen sinks providing style and functionality all in one.

AEG’s cooking, dishcare, laundry and cooling appliances offer intelligent technology and responsive design, guaranteeing exceptional performance.

Franke South Africa 0861 372 653 | www.franke.co.za / www.zipsa.co.za Franke South Africa boasts a comprehensive range of beautiful sinks, sleek and functional mixers, kitchen accessories and waste management products, in addition to a comprehensive range of worktops and ZIP instant, boiled, chilled and sparkling water units inspiring creativity and design.

NATIONAL BRANCHES: Johannesburg 0861 372 653 (customer care line), Kwa-Zulu Natal 0861 372 653 (customer care line), Bloemfontein 0861 372 653 (customer care line), Cape Town & Port Elizabeth (021) 506 1480

National Edging (031) 701 3512 | www.nationaledging.co.za With over 1500 edging designs, 200 PVC wrap designs and 15 different edgebanding adhesives in stock, National Edging are the leading suppliers in Sub Saharan Africa.

We are committed to supplying the industry with the highest quality products, service and technical support.

Johannesburg 011 822 3278, Cape Town 021 556 1273

Colour Values: Red CMYK: 0.100.100.0 Teal CMYK: 100.0.30.23

Parrot Displays 010 140 4900 | www.parrot.co.za Parrot Products provide a large range of customisable splashback solutions for both kitchens and bathrooms. Our splashbacks can be made up in any shape, colour, design or image. All options are printed directly onto the low-iron glass surface. We offer nationwide delivery and installation.

PG Bison 0860 579 196 | www.pgbison.co.za We are a leading manufacturer of wood based products, with a range of quality brands, created from sustainably managed resources and produced in state-of-the-art facilities.

Roco Fittings (0861) 11 7626 (ROCO) | www.roco.co.za Roco Fittings is an importer and distributor of Quality Fittings sourced locally and internationally for the kitchen and furniture industries. We have remained market leaders in this business for over 25 years, while updating our extensive range of products and keeping pace with the latest trends.

NATIONAL BRANCHES: Johannesburg (011) 444 9120, Centurion (012) 653 7673, Boksburg (011) 826 2872, Stikland (021) 905 1225 / (021) 905 2446, Port Elizabeth (041) 365 2130, Durban (031) 569 6969, Bloemfontein (051) 434 1266

Upper Edge Products & Pearlman Veneers UEP - (011) 865 2847 | www.upperedge.co.za PV - (011) 865 2151 | www.pearlman.co.za Upper Edge Products supply the kitchen and furniture manufacturing industry with supreme quality edging, PVC wrap foil/vinyl and woodworking adhesives.

Pearlman Veneers are suppliers and manufacturers of high gloss and super matt PET lacklaminate boards, quality veneered boards, natural and reconstituted veneer bundles and layons.

Articad – Cape Town Articad – Gauteng Articad – Kwa-Zulu Natal

(079) 526 0355 / (079) 526 0355 (011) 704 5400 (082) 411 2286 / (011) 704 5400

www.articad.co.za www.articad.co.za www.articad.co.za

BSH Home Appliances – Cape Town BSH Home Appliances – Johannesburg BSH Home Appliances – Kwa-Zulu Natal Davidson’s Boards – Brackenfell, Cape Town Davidson’s Boards – Durban Davidson’s Boards – George Davidson’s Boards – Montague Gardens, Cape Town Davidson’s Boards – Ottery, Cape Town Davidson’s Boards – Silverton, Johannesburg Davidson’s Boards – Strand, Cape Town Kayreed Board and Timber – Johannesburg Eclipse - Furniture and Hardware Supplies – Cape Town Eclipse - Furniture and Hardware Supplies – Johannesburg Eclipse - Furniture and Hardware Supplies – Kwa-Zulu Natal Eclipse - Furniture and Hardware Supplies – Port Elizabeth Gelmar – Head Office Gelmar – Bloemfontein Gelmar – Boksburg Germar – Centurion Gelmar – Charsworth Gelmar – East London Gelmar – Fourways Gelmar – George Gelmar – Greenstone Gelmar – Hillcrest Gelmar – Hillfox Gelmar – Kimberly Gelmar – Margate Gelmar – Meadowdale Gelmar – Montague Gelmar – Montana Gelmar – Mt Edgecome Gelmar – N1 City Gelmar – Nasrec Gelmar – Nelspruit Gelmar – Newcastle Gelmar – Newmarket Gelmar – Pietermaritzburg Gelmar – Pinetown Gelmar – Port Elizabeth Gelmar – Pretoria Gelmar – Randburg Gelmar – Sandton Gelmar – Springfield Gelmar – Tokai Gelmar – Umhlanga Gelmar – Welkom Gelmar – Xavier Hansgrohe – Cape Town Hansgrohe – Johannesburg Hansgrohe – Kwa-Zulu Natal International Slab Sales (Pty) Ltd – Cape Town International Slab Sales (Pty) Ltd – Johannesburg International Slab Sales (Pty) Ltd – Kwa-Zulu Natal Liebherr – Cape Town Liebherr – Johannesburg & Kwa-Zulu Natal

(021) 550 9900 (011) 265 7800 (031) 562 8160 (021) 981 1352 (031) 577 1916 (044) 878 0214 (021) 551 9060 (021) 704 7060 (012) 803 6410 (021) 853 4200 (011) 837 8602 (021) 555 2282 (011) 444 8118 (031) 579 2620 (041) 581 0219 (031) 573 2490 (051) 447 0831 (010) 591 7406 (012) 653 0780 (031) 401 8472/1 (043) 726 5637 (010) 591 7430 (044) 050 0150 (010) 035 0227 (031) 940 4950 (011) 675 7990/3 (053) 831 2831 (039) 317 4136/9 (011) 453 4931 (021) 879 1699 (010) 591 2695 (031) 539 5092 (021) 035 0080 (010) 590 0970 (013) 880 0001 (034) 880 0034 (010) 591 7477 (033) 342 2005/15 (031) 701 0128 (041) 363 0165 (012) 804 0257 (010) 035 0314 (010) 591 7878 (031) 263 1065 (021) 201 2496 (031) 941 2590 (057) 352 8134 (010) 593 3880 (021) 447 7144 (011) 445 0000 (031) 791 2277 (021) 511 2353 (011) 822 1350 (031) 577 2828 (072) 529 8180 (011) 365 2562

www.bsh-group.co.za www.bsh-group.co.za www.bsh-group.co.za www.davidsonsboards.co.za www.davidsonsboards.co.za www.davidsonsboards.co.za www.davidsonsboards.co.za www.davidsonsboards.co.za www.davidsonsboards.co.za www.davidsonsboards.co.za www.kayreed.co.za www.eclipsegroup.co.za www.eclipsegroup.co.za www.eclipsegroup.co.za www.eclipsegroup.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.gelmar.co.za www.hansgrohe.co.za www.hansgrohe.co.za www.hansgrohe.co.za www.interslab.co.za www.interslab.co.za www.interslab.co.za www.liebherr-appliances.co.za www.liebherr-appliances.co.za

Mactool – Cape Town Mactool – Johannesburg Mactool – Kwa-Zulu Natal Max on Top – Gauteng Max on Top – Kwa-Zulu Natal Max on Top – Western Cape Maxima Software – Cape Town & Port Elizabeth Maxima Software – Jhb / Free State / Limpopo / Mpumalanga Maxima Software – Kwa-Zulu Natal Miele – Cape Town Miele – Johannesburg Miele – Kwa-Zulu Natal Niemann SA – Cape Town Niemann SA – Johannesburg Niemann SA – Kwa-Zulu Natal Proquartz – Cape Town Proquartz – Johannesburg /Bloemfontein Proquartz – Kwa-Zulu Natal Salvocorp – Cape Town Salvocorp – Johannesburg Salvocorp – Kwa-Zulu Natal Smeg Appliances SA – Cape Town Smeg Appliances SA – Johannesburg Smeg Appliances SA – Kwa-Zulu Natal Sonae Arauco (Pty) Ltd – Cape Town Sonae Arauco (Pty) Ltd – Johannesburg Sonae Arauco (Pty) Ltd – Kwa-Zulu Natal Whirlpool South Africa – All Regions

(021) 552 8566 (011) 823 1077 (031) 350 4004 (086) 111 3495 (082) 787 8806 (021) 556 5160 (011) 083 5968 (011) 083 5968 (011) 083 5968 (021) 946 3148 (011) 875 9000 (031) 584 6929 (031) 700 3961 (031) 700 3961 (031) 700 3961 (021) 905 0048 (012) 653 3938 (031) 791 0033 (021) 552 4918 (011) 472 8899 (011) 472 8899 (021) 510 0390 (011) 463 1016 (031) 566 2770 (021) 595 0885 (011) 236 1400 (031) 266 2767 (086) 088 4401

www.mactool.co.za www.mactool.co.za www.mactool.co.za www.maxontop.co.za www.maxontop.co.za www.maxontop.co.za www.maximasoftware.co.za www.maximasoftware.co.za www.maximasoftware.co.za www.miele.co.za www.miele.co.za www.miele.co.za www.niemannsa.co.za www.niemannsa.co.za www.niemannsa.co.za www.proquartz.co.za www.proquartz.co.za www.proquartz.co.za www.salvocorp.co.za www.salvocorp.co.za www.salvocorp.co.za www.smeg.co.za www.smeg.co.za www.smeg.co.za www.sonae.co.za www.sonae.co.za www.sonae.co.za www.whirlpool.co.za

S T A T E M E N T

PLEASE NOTE: This list was accurate at the time of going to print. Please confirm all memberships on the KSA web site - www.ksa.co.za

YOUR KSA TEAM YOUR KSA TEAM

Your KSA team are a dynamic and hard-working group. Each one has a unique skill set that adds value to YourbyKSA team are atogether dynamic hard-working oneofhas unique skill set the KSA and working closely theyand ensure each regiongroup. has theEach benefits thataskill set. With that having adds avalue to the inKSA and by sales working together each region has Stephanie background psychology, and closely marketing; Marlisethey beingensure a qualified accountant; Meganthe a qualified attorney, havingWith vast Stephanie knowledge about thearetail sector andinKerryn having sales benefits of thatCarmen skill set. having background psychology, extensive industry experience; feel confident in the team’s to take attorney; the KSA to Carmen new andkitchen marketing; Marlise beingwea can qualified accountant; Meganability a qualified heights. having vast knowledge about the retail sector and Kerryn having extensive kitchen industry

experience; we can feel confident in the team’s ability to take the KSA to new heights.

Stephanie Forbes National Manager

Marlise Daniel Admin & Accounts Manager

Megan Craft Gauteng Regional Representative

Kerryn Bailey KZN Regional Representative

Carmen Howard Western Cape Regional Representative

DESIGN

SUPPLY

INSTALL

Customisation of YOUR space

Passion For Service Excellence Since 2004

Tel: 012 644 2113 | E-mail info@proreno.co.za Address: 1018 Kruger Avenue | Lyttelton Manor | Centurion Website: www.proreno.co.za

A proud member of the Kitchen Specialist Association for the past 10 years

Quartz Worktops In a colour palette to suit every design enthusiast.

The Spotted Stone Quartz Surface is exclusively sold by Franke.

Product Code:1050063 Made to match the Franke Fragranite Grey Stone Maris Sink.

makeitwonderful.co.za 0861 372 653 | enquiry.fsa@franke.com | www.franke.co.za