Catalogue of Small Wind Turbines
2009
Nordic Folkecenter for Renewable Energy K Christensen
Catalogue of Small Wind Turbines Under 50 kW
2009 K Christensen
Nordic Folkecenter for Renewable Energy Nordisk Folkecenter for Vedvarende Energi Kammersgaardsvej 16, Sdr. Ydby DK-7760 Hurup Thy Denmark www.folkecenter.net Tel: +45 97 95 66 00 Fax: +45 97 95 65 65 E-mail: info@folkecenter.dk
ISBN 978-87-7778-126-1 FC print April 2009
I
- Catalogue of Small Wind Turbines - 2009 -
Introduction This catalogue contains information about wind turbines that are manufactured and distributed world wide. The information is a basic representation of the turbines, please be aware that there are many factors and regional variables that prevent an accurate comparison between different models. Prices in particular are not comparable as they may or may not include the control system, tower, cables, shipping, taxes, etc. This data is subject to change since many of these machines are constantly undergoing testing and development. As of April 2009 this information is accurate to the best of our knowledge, however we can not guarantee that all information in the following pages is up to date. For more information about a wind turbine contact the company listed or find a distributor in your area. The companies listed are primarily manufacturers, however, if information is only available from a distributor their company information accompanies that of the turbine even though it is produced elsewhere. This catalogue is not a promotion of any of these companies or products. Information comes from the companies listed, not from direct knowledge or testing of these machines. All information and photos included in the following pages are credited to the manufacturers/distributors. Many thanks to all those people who provided this information, their help is very much appreciated. The page by page arrangement is alphabetical by country and alphabetical by company name within each country. The index has turbines arranged by model name according to size (rated output in watts). Beside this information is every model’s swept area (square meters), the physical size of the rotor. There are 211 turbines described in the following pages, produced by ninety-one manufacturers from twenty-nine countries. If any of these pages are to be reproduced please reference this publication as the source. The international system for writing numbers has been used in the following pages. The only punctuation mark used is the decimal point, commas are omitted when separating or spacing numbers. This catalogue is a third edition with revisions planned for the future. If you have information about wind turbines that are not described here, or corrections to existing pages please contact the Nordic Folkecenter for Renewable Energy.
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
II
A note about the terminology (in order of appearance in the following specification charts)
Model
The name of a specific wind turbine, used to distinguish it from others.
Orientation
The relation of the rotor to the tower, - Upwind of the tower; the rotor faces the wind and is yawed, in most cases by a tail vain. - Downwind of the tower; the machine is yawed by the blades themselves.
Rated Output (W)
The power produced by a wind turbine in watts at its rated wind speed. However, another indicator (possibly more appropriate) of a turbine’s size is its rotor diameter and/or swept area, i.e. the physical size of the machine.
Peak Output (W)
Maximum power output of a wind turbine, for many small turbines this can be the same as rated output.
Output Voltage (V)
In the context of this catalogue this term refers to any or all of the following: the voltage produced directly from the turbine, or the voltage once it has been inverted/rectified for the purpose of charging batteries or connection to a utility network.
Generator Type
The type of generator or alternator that is used to convert mechanical energy to electrical energy (note: PMG = Permanent Magnet Generator).
Applications Stand Alone
The machine is intended for use in remote applications where the excess electricity is stored in batteries.
Grid Connection
The wind turbine is designed to be connected to the utility grid.
Direct Heating
A heating system that stores energy generated from the wind as hot water which can be used for space heating and hot water use.
Pumping
These machines pump water either mechanically or in combination with an electrical pump.
Controller Type
The system that monitors the condition of the wind turbine and its environment. Depending on these conditions, the controller can adjust the operation of the machine to prevent damage or to optimize performance.
Over-speed Protection
Mechanism or device for limiting the maximum speed of the rotor to prevent the rotor from self-destruction. Some examples include; - Furling: the rotor swings out of the wind either sideways or up to lessen the size of the swept area exposed to the wind, - Stall regulation: the blades of a fixed pitch wind turbine can be designed to stall in high wind speeds (stall = less lift and more drag), - Pitch control: the speed is controlled by varying the angle of the blade to its direction of travel.
Blade Material
The materials used in construction of the blades.
# of Blades
The number of blades on a wind turbine rotor.
Rotor Diameter (m)
Diameter of the circle swept by the rotor of a wind turbine, for vertical axis turbines this is the length of the rotor cross arm.
Blade Height (m)
The height of the blades. Only data for the blade height of vertical axis turbines is included in the following pages.
Swept Area (m2)
The area of the wind stream swept by a wind turbine rotor.
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
III
- Catalogue of Small Wind Turbines - 2009 -
Wind speed (m/s)
(note: 1m/s = 2.24mph = 3.60km/h = 1.94 knot)
Rated
Wind speed at which a turbine produces its rated power. Keep in mind that the rated wind speed is not a standard. Different turbines are rated at different wind speeds.
Cut-in
Wind speed at which a wind turbine begins to produce power.
Cut-out
Wind speed at which a wind turbine is stopped from producing electricity to prevent over speeding and damage to the machine. Many small turbines have no cut-out wind speed but will instead control the rotational speed of the rotor (ex. furling).
Furling
Wind speed at which the machine will control rotor speed and begin furling. For the context of this catalogue this term can also include the wind speed at which any mechanism other than furling will begin to prevent over-speeding.
Survival
The maximum wind speed a turbine can withstand without suffering irreparable damage.
Head Weight (kg)
The weight of the nacelle, the rotary components within the nacelle, the tail vain, and the weight of the rotor. In short, this is the weight of the wind turbine excluding the tower.
Tower Type
The type of tower that is recommended or available for a specific wind turbine.
Tower Height (m)
The recommended height for the tower in order for the machine to function at its rated capacity.
Product Life (years)
Number of years that a specific model of wind turbine is expected to operate.
Warranty (years)
Amount of time in which any defect in the turbine or components will be repaired or replaced by the company it was purchased from.
Units sold
The number of a specific model that have been sold.
Years on the market
Amount of time that a specific model has been available for purchase.
Price
Cost of the wind turbine. This data is not comparable as the price may or may not include the control system, tower, cables, shipping, taxes, etc. For specific cost information contact the manufacturer/distributor.
Much of the above terminology is referenced from the “1997 Glossary of Wind Energy Terms� by Paul Gipe and Bill Canter.
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
IV
Index Model Name
Rated Output (W)
Swept Area (m2)
Page
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - <250 Watts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Notus112 Katie 200 WS-0,15 (B, C) WS-0,30 (A, B, C) WS-2 (A, B) WS-4 (A, B, C) AC-120 AC-240 FLIP 150 Alu Windrad AR-200W Wind Smile 200W WG-200 1200 100 x 0.9 AERO2GEN AERO4GEN AERO6GEN Rutland 504 Rutland 913
250 200 108 108 240 240 120 240 150 6 200 200 200 200 100 48 120 240 25 90
Rutland FM 910-3
90
0.98 1.8 0.15 0.3 2 4 1.13 2.14 0.95 0.55 2.69 1 2.3 1.13 0.68 0.26 0.59 1.17 0.20 0.65 0.65
Wren
85 140 - 180
0.78 5.6
Dragonfly
5 18 20 20 20 20 22 22 27 29 34 40 48 55 71 76 76 76 77 77 77 79 83
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 251-500 Watts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Soma 400 Notus138 EXTRACTOR Electrovent WW-450 WW-300H WW-500H HY-400L Ken 500 AC-502 FLIP 500 Superwind 350 VENCO-Twister-300-T AR-500W Energy Ball V100 TRONC Street light Unit 1800 300 x 1.2 D-400 StealthGen Rutland FM 1803
Mistral Air-X
www.folkecenter.net
-
400 350 300 250 or 500 450 300 500 400 500 500 500 350 300 500 500 438 350 300 400 400 340
3.14 1.5 1.81 1.81 1.54 3.80 4.91 1.54 4.9 4.52 2 1.13 1 8.04 1 1.77 2.54 1.13 0.95 0.95 2.54
300 400
3.14 1.04
Nordic Folkecenter for Renewable Energy
3 5 6 8 14 14 14 15 18 22 27 28 30 34 36 39 55 71 72 72 77 79 88
-
Tel: +45 97 95 66 00
V
- Catalogue of Small Wind Turbines - 2009 -
Model Name
Rated Output (W)
Swept Area (m2)
Page
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 501-1000 Watts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Soma 1000 Gerar246 800 Watt ECO 1200 WW-750 WW-1000H HY-600W TAOS600 TAOS1000
1000 1000 800 1000 750 1000 600 600 1000
5.72 4.75 4.52 5.99 2.54 6.15 2.54 2.54 3.14 750 4.52 1000 4.52 1000 3.61 1000 7.06 650 3.80 1000 13.85 1000 2.07 1000 3.75 1000 2.54 700 4.52 800 7.07 1000 10.18 1000 13.85 1000 2.4 600 1.77 800 3.8 1000 7.07 600 3.14 900 3.46 1000 4.15 1000 9.5 750 4.52 600 2.27 1000 (600W / 12v Version) 2.54 1000 4.9 800 7.30 900 3.46 1000 5.72 1000 11.89
AC-752 AC-1002 VENCO-Twister-1000-T Butterfly BF 1 K UE 6 LV / HV AR-1000W Easy Vertical Wind Smile 1kW Airdolphin 2400 3000 3600 4200 WS 1200 e150 e220 e300i Inclin 600 Lakota LONGBOW 2,2 kW VK240 600 x 1.7 FuturEnergy 1KW BWC XL.1 10 ft axial flux turbine kit Whisper 100 Whisper 200 S-8
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
3 5 7 13 14 14 15 16 16 22 22 30 32 33 34 38 40 41 55 55 55 55 56 58 58 58 61 63 63 64 67 71 73 82 85 88 88 89
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 Model Name
Rated Output (W)
VI
Swept Area (m2)
Page
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1001-2500 Watts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1.6 kW 1.3 kW WW-2000H HY-2000W TAOS2000
1600 1300 2000 2000 2000
Antaris 2,5 KS Home 1500 UE 15 LV / HV Energy Ball V200 Âľ2850
2500 1500 1500 2500 2000
Passaat KEITH_2K Turby WES5 Tulipo Gusto 2.0 kW SW 2/5 Proven 2.5 MiniWind 1100 MiniWind 2200 SWIFT Wind Energy System AWP 3.7 T330 Inclin 1500 WE 1500
1400 2000 2500 2500 1800 2000 2500 1100 2200 1500 1500 or 2000 1500 1500 1500
6.15 6.8 8.04 7.54 6.15 7.07 8.03 8.04 3.1 6.38 7.64 4.8 5.3 19.6 8.04 16 9.62 2.54 2.54 3.53 10.75 8.55 5.72 9.07
Merlin
1100 2500 2500 2000 2400
9.62 10.17 3.19 13 10.87
ARE110 S322 ST 2.0 California SuperTwin Skystream 3.7
7 10 14 15 16 25 26 33 36 39 43 44 45 46 47 50 52 53 53 54 57 59 61 70 79 80 86 87 88
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2501-5000 Watts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
IVS - 4500 Aerogenesis 5 kW 3.2 kW 4.8 kW Windancer3 WW-3000H WW-5000H Tuule T188 WS-12 Antaris 3,5 KS Antaris 5,0 KS Home 3000 Professional 5000 WESpe BF 3 K UE 33 LV / HV UE 42 LV / HV AR-5000W 3 kW
www.folkecenter.net
4200 5000 3200 4800 3200 3000 5000 4000 5000 3500 5000 3000 5000 5000 3000 3300 4200 5000 3000
-
15.9 19.64 12.56 19.63 5.30 12.56 19.63 18.8 12 9.62 12.94 13.84 21.22 15.9 15.9 16.97 18.85 36.3 10.75
Nordic Folkecenter for Renewable Energy
1 2 7 7 12 14 14 19 20 25 25 26 26 31 32 33 33 34 35
-
Tel: +45 97 95 66 00
VII
- Catalogue of Small Wind Turbines - 2009 -
Model Name
Rated Output (W)
Swept Area (m2)
Page
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2501-5000 Watts (continued) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5 kW Simply Vertical Âľ4800 Wind Smile 5kW WindCruiser Montana Breeze 5000 e400i
5000 3000 5000 5000 3000 5000 5000 3000 3000 4500 3000 3000 5000 5000 3000 5000 4200 5000 3000 3000
T460 T550 W03 Inclin 3000 VENTO 5000 6kW WE3000 AT5-1 qr5 S594 Whisper 500 S-30
20.42 6.6 18.09 8 12.56 19.63 19.63 12.57 16.61 23.75 10.2 10.75 21.24 33.17 18.08 23 13.6 5.88 15.9 30.2
35 38 39 40 42 43 51 58 59 59 60 61 62 65 70 75 78 86 88 89
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5001-10 000 Watts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Verne555 Windancer7 WW-10000H Scirocco E5.6-6 Aircon10 S EasyWind 6 AC EasyWind 6 DC BF 6 K 10 kW Maxi Vertical Alize Proven 6 T780 Inclin 6000 5,5 kW 12kW AV-7 WE8000 6000 x 5.5 ARE442 6 Meter BWC Excel-R BWC Excel-S S-100 VT10
www.folkecenter.net
6000 6600 10 000 6000 10 000 6000 7500 6000 10 000 6000 10 000 6000 10 000 6000 5500 10 000 6500 8000 6000 10 000 10 000 7500 10 000 10 000 10.000
-
24.18 8.55 38.46 24.6 39.57 28.27 28.27 18.1 30.18 11.75 38.47 23.75 47.76 10.75 28.3 50.24 alt 63.59 129 36.3 23.74 40.69 35.3 37.5 37.5 119.2 35
Nordic Folkecenter for Renewable Energy
-
5 12 14 21 23 24 24 32 35 38 43 52 59 61 64 65 69 70 71 80 81 82 82 89 90
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 Model Name
Rated Output (W)
VIII
Swept Area (m2)
Page
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - >10 000 Watts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
STEP V2 Wind Turbine 14.5 kW PGE 20/35 PGE 20/50 WTI 30 kW Windancer23 WW-20000H Gaia-Wind 11kW VENCO-Vertikon-H50 AR-30000W 20 kW MaestraleForza 20 JIMP25 Mega Star Vertical Âľ6670 Enwia E12 Enwia E40 Proven 15 T1100 11 kW 15 kW 22 kW 30 kW 45 kW 25kW 50kW P14-30 10kW Gazelle 20kW 11 Meter EW50 S-300 S-500 Jacobs 31-20
www.folkecenter.net
15 000 14 500 35 000 50 000 30 000 22 800 20 000 11 000 50 000 30 000 20 000 20 000 25 000 (option 20 000) 20 000 11 000 12 000 40 000 15 000 20 000 11 000 15 000 22 000 30 000 45 000 20 000 50 000 30 000 12 500 20 000 30 000 50 000 30 000 50 000 20 000
-
63.6 50.24 314 314 78.54 12.56 78.50 133 150 143 84.91 52.14 78.5
4 7 9 9 11 12 14 17 30 34 35 36 37 38 39 49 49 52 59 64 64 64 64 64 65 65 66 68 74 81 84 89 89 91
49.3 34.92 28.07 78.5 63.59 94.99 78.5 95 153 154 200 113 255 154 50.24 95 105 177 314 490.8 70
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
1
- Catalogue of Small Wind Turbines - 2009 -
INVAP Ingenieria S.A. (Argentina) Elflein 1211 (R8400AMU) San Carlos de Bariloche RĂo Negro
www.invap.com.ar Tel: +54 (2944) 44 5400 Fax: +54 (2944) 42 4800 Contact: Alfredo Carlos De Napoli E-mail: denapoli@invap.com.ar
9 years in business Direct from factory distribution
IVS - 4500 - BT
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (USD) Additional Info
www.folkecenter.net
IVS - 4500 - ANTARTIDA
IVS - 4500 - BT
IVS - 4500 - ANTARTIDA
Upwind 4200 4500 48 ; 380 V 3 phase 380 V 3 phase (variable voltage and frequency.) (variable voltage and frequency.) Multi pole PMG direct drive Stand Alone, Direct Heating, Pumping Electronic rectifier and battery charger regulator Side furling and electronically Active electronically controlled controlled dump loads side furling Actuator Same as the BT with: Fiberglass reinforced plastic and expanded polyurethane core anti-icing coating 2 with Delta-3 improvement 4.5 15.9 12 4.2 none
12 4.2 34 (Electronic sensing of wind speed and electric actuator) 13 60 143 Tubular 9
13 (starts progressive furling) 44 120 Guyed lattice or guyed tubular 9, 14, 20 15 3 23 1 8 Two bladed wind generator, Free on Board (FOB) $ 8 200 $ 19 000 The Pumping system operates by means of a submersible multi-stage centrifugal electro pump with direct electric coupling to the wind charger, applicable for locations where the well (low or flat area) is far from the optimal wind place (hill or elevated point) where the wind charger is set up. It is possible to use the 380 V model to charge batteries, placing the generator far away from the batteries, carrying the energy by means of low section cables, utilizing a transformer at the end of the line.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
2
Aerogenesis Australia (Australia) PO Box 4029, Woodrising, NSW 2284 www.aerogenesis.com.au E-mail: contact@aerogenesis.com.au Contact: David Wood 4 years in business Domestic and international distribution Wind turbines are also available direct from factory by large order
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (VDC) Output Voltage (VAC) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Years on the market Price (EUR) Additional Info
www.folkecenter.net
Aerogenesis 5 kW Upwind 5000 5000 24, 48 or other as specified by customer 110 V, 60 Hz / 220 V, 240 V (both 50 Hz) Fan cooled 4 pole, 3 phase induction generator Stand Alone and Grid Connection Microprocessor controlled IGBT Microprocessor control of generator and electro-mechanical brake Vacuum infused fibre glass reinforced epoxy 2 5 19.64 10.5 3 15 Does not furl 50 170 Counterweighted swing tower hinged at 8 m from the base, an alternative tilt-up tower is also available 18 20 2 new product 10 400 â&#x201A;Ź The controller has an integral inverter so the customer does not need to purchase this additional item. For battery charging a DC-DC link is required, cost depends on battery voltage. The blade is uniquely designed for quiet operation, high power output, and good low wind performance The blade and controller have been patented. Field testing of demonstration turbine is underway Government sponsored program will install 40 turbines by mid-2010.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
3
- Catalogue of Small Wind Turbines - 2009 -
SOMA POWER P/L (Australia) trading as SUNRISE SOLAR 49 Vista Avenue North, Copacabana NSW 2251 www.somapower.com.au Tel: +61 2 43811531 Fax: +61 2 43821880 E-mail: sunrise@dragon.net.au Contact: David Bartley 20 years in business Domestic and international distribution Also available direct from factory
Soma 1000
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Additional Info
www.folkecenter.net
Soma 400
Soma 1000
Upwind 400 1000 500 1200 12, 24, 32, 36, 48, 110, 120 24, 32, 36, 48, 110, 120 PMG 3 phase Stand Alone and Grid Connection; through a variety of inverters manufactured by other companies PWM Mosfet switching, dump load is included Tilt-up GRP 2 2 2.7 3.14 5.72 10 4 3.5 12 50 35 Galvanized tilt pole 13 or 20 >15 1 Approx 1000 20 Standard Controller allows wind generator to run safely with battery disconnected. Wind genenerator runs at set battery voltage and dumps excess power into the dump load.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
4
STEP Energysystems GmbH (Austria) Sonnleitberg 60a 8616 Gasen www.step-gmbh.at Tel: +43 3171 560-0 Fax: +43 3171 560-12 E-mail: office@step-gmbh.at 13 years in business Turbines available direct from factory Domestic and international sales via partner comanies
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type
Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Additional Info
www.folkecenter.net
STEP V2 Wind Turbine Downwind, free yawing 15 000 15 000 0-400VAC Synchronous generator Stand Alone, Grid Connection, Direct Heating and Pumping The wind turbine is controlled by an innovative TCP/IP control system which enables a 24/7 remote control and monitoring via web, video cam and mobile phone. Pitch control Glass fiber and carbon fibre reinforced plastic 3 9 63.6 10.5 3 25 50 appr. 1000 Lattice, Stand alone tubular, or Anchored turbular 15 or 18 Lubrication, corrosion and visual inspection of all parts and blades recommended once every year. Heavy machinery not required for turbine instalation.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
5
- Catalogue of Small Wind Turbines - 2009 -
Enersud Indústria e Soluções Energéticas Ltda. (Brazil) Rua Brasilina Rosa de Jesus, nº 02 - Sala 201 Tribobó - São Gonçalo / RJ - CEP: 24.750-690 www.enersud.com.br Verne555
Tel: +55 (21) 3710-0896 E-mail: contato@enersud.com.br Contact: Claudio Almeida 7 years in business
Notus112
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Warranty (years) Units sold Years on the market Price (USD)
Gerar246
Notus112
Active stall Fibre glass 3 1.12 0.98 12 3 17 N/A 55 9.5 2 20 3 $1 380
www.folkecenter.net
Notus138
Upwind 250 350 12 / 24 12 / 24 Axial flux Stand Alone, Direct Heating, Pumping
-
Gerar246
Verne555
1000 12 / 24 / 48 / 220
6000 120 / 220 / 400
Stand Alone, Grid Connection, Direct Heating, Pumping
1.38 1.5
2.46 4.75
5.55 24.18
10
35
198
75 3
90 4 Prices include turbine only $1 380 $2 604
Nordic Folkecenter for Renewable Energy
-
5 1 $12 826
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
6
ALTERNATE POWER TECHNOLOGIES Inc. (Canada) P.O. Box 1236 Oakville, Ontario L6J 5C7 www.vpturbines.com Tel: +1 (905) 599-5393 E-mail: info@vpturbines.com sales@vpturbies.com Contact: Paul Stearns 7 yeares in business Turbines available direct from factory
Model Orientation Rated Output (W) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Product Life (years) Warranty (years) Years on the market Price (USD) Additional Info
www.folkecenter.net
EXTRACTOR Upwind 300 (12V DC system) Permanent Magnet Alternator Stand Alone, Direct Heating, Pumping Mechanical Variable pitch blade actuation Aluminum alloy 6063 T6 3 1.52 1.81 10 2.7 cut-out is totally unnecessary furling is totally unnecessary >39 6.1 20 yr with periodic maintenance 2 yr, shipping not included 3 Turbine: $ 979 Charge controller: $ 110 Variable pitch operation is the optimum method of achieving: - absolutely foolproof overspeed control, - superb low speed wind capture, - ultra wide range of wind speed capture
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
7
- Catalogue of Small Wind Turbines - 2009 -
Cyclone Green Power Inc (Canada) Head Office: 1420 Dolly Varden Way Qualicum Beach British Columbia Canada V9K2S4 www.cyclonewindgenerators.com Tel: +1-250-738-0309 Fax: +1-250-738-0308 E-mail: sales@cyclonewindgenerators.com Contact: Kevin Marwick 8 years in business European office: Marseille France Tel: +33 6 63 96 14 59 E-mail: juliesion@cyclonewindgenerators.com Contact: Julie Sion Domestic and international distribution Turbines also available direct from factory
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Years on the market Price (CAD) Additional Info
www.folkecenter.net
800 Watt
1.6 kW
3.2 kW
4.8 kW
Upwind 800 1600 3200 4800 900 1800 3300 5000 12, 24, 48, 380 24, 48, 380 48, 380 Direct drive permanent magnet Stand Alone, Grid Connection (w/additional inverter), Direct Heating Breeze Boost PWM controller w/boost Mechanical and electrical Fibreglass 3 2.4 2.8 4 5 4.52 6.15 12.56 19.63 13 2~3 16~18 39 58 Mono or guyed 6 15-25 years 5 8
14 500 16 500
8 50.24
12
67
229
263
1380
7
14
Prices include: wind generator w/controller $2 493 $3 583 $7 665 $9 854 CE approvals; Power boost, and inverter control
-
14.5 kW
Nordic Folkecenter for Renewable Energy
-
$39 501
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
8
Electrovent (Canada) 663 rue Routhier QuĂŠbec, P.Q. G1X 3J8 www.electrovent.com Tel: +1 (418) 654-1759 E-mail: belisleb@webnet.qc.ca Contact: Bernard Belisle 16 years in business Wind turbines are available direct from factory
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Survival Head Weight (kg) Product Life (years) Warranty (years) Years on the market Price (CAD) 15 Amp assembled unit 30 Amp assembled unit Hydro Alternator; 15 or 30 Amp Additional Info
www.folkecenter.net
-
Electrovent Upwind 250 or 500, depending on charging current 12 DC --> 15.8 DC for deep cycle batteries GM / Delco Remy (modified) Stand Alone Integrated proportional electronic (our own design) Centrifugal aerodynamic opening at 1450 RPM Canadian western red cedar + marine epoxy 2 1.52 1.81 16 2 55 9.5 15 minimum One full 15 $1 000 $1 200 $295 or $450 For small hydro electric installations on small streams. Can easily withstand Northern Canadian winter snow storms. All external nuts and fasteners are in stainless steel for marine environment. Available directly from the manufacturers facilities. English and French operators manuals available on the internet via the Electrovent website.
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
9
- Catalogue of Small Wind Turbines - 2009 -
Ă&#x2030;nergie PGE (Canada) 82 Giasson Saint-Jean-Port-Joli, QuĂŠbec G0R 3G0 www.energiepge.com Tel: +1 418-598-3338 ext 2226 Fax: +1 418-598-9804 Contact: Marc A Normandin E-mail: marc-andre.normandin@energiepge.com 5 years in business Domestic and international distribution
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Grid Connection Stand Alone Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years)
www.folkecenter.net
PGE 20/35
PGE 20/50
Downwind 35 000 240, 480, 600 (Stand alone: 400)
50 000 480, 600
Induction, 1 or 3 phase 50Hz & 60Hz Induction, 3 phase 50Hz & 60Hz Synchronous, 3 phase Grid Connection, and Stand Alone PLC based is the standard, many other options are available Stall Regulation Epoxy / fiberglass 3 20 314 11 3.5 4 25 52.5 4000 Freestanding Monopole or Lattice, Guyed tubular monopole or lattice (both tilt-up) 24, 36, 42 (Monopole & Lattice) 20 2, and a 3 year warranty extension is available
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
10
Raum Energy Inc. (Canada) 3718A Millar Ave Saskatoon, SK S7P 0B1 www.raumenergy.com Toll Free: +1 (877) 946-3979 Main Tel: +1 (306) 651-0586 Sales Tel: +1 (306) 651-1476 Fax: +1 (306) 651-0605 E-mail: sales@raumenergy.com, support@raumenergy.com Contact: Dan Senick Domestic and international distribution Turbines also available direct from factory
Model Orientation Rated Output (W) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Additional Info
www.folkecenter.net
1.3 kW Upwind 1300 Gearless, Brushless, PMG Stand Alone, Grid Connection, Pumping Raum Energy Spring/hinge - based tilt-up Fibreglass reinforced plastic 3 2.9 6.8 11 3 10 45 39 Engineered free standing steel truss 24.5 25 5 Plans for a 3.5 kW wind turbine to be released summer 2009 All componets are made by Raum Energy - generator & inverter
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
11
- Catalogue of Small Wind Turbines - 2009 -
Wenvor Technologies Inc. (Canada) P.O. Box 1482 Guelph, Ontario N1H 6N9 www.wenvortechnologies.com Tel: +1-519-767-5227 Fax: +1-519-767-5228 E-mail: info@wenvortechnologies.com Contact: Randy Seager Established in 1990 Domestic and international distribution Turbines also available direct from factory
WTI 30 kW
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type
Upwind, Horizontal Axis 30 000 30 000 600VAC @ 60 Hz or 50 Hz specified voltage Induction Stand Alone, Grid Connection CSA approved automatic control system. Optional controls for stand-alone, battery charging, or wind diesel sites are available. 2 stage pitch regulation Carbon composite with aluminum tips and internal copper cable for lightning protection. 2 10 78.54
Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Cut-in Cut-out Furling Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Years on the market Price
www.folkecenter.net
4 N/A N/A 1250 Tilt-up guy wire 24 & 30 20 2 Since 1996 Please contact Wenvor Technologies for a quote
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
12
Wind Simplicity Inc. (Canada) 642 Sheppard Avenue East, Suite 617 North York, ON M2K 1B9 www.windsimplicity.ca Tel: +1-877-335-9453 (WIND) +1-416-227-9463 (WIND) E-mail: info@windsimplicity.ca
Windancer23
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Blade Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Start-up Power start Furling Total Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Years on the market Price (CAD) Additional Info
www.folkecenter.net
Windancer3
Windancer7
Windancer23
Upwind 3200 W / 7.9 amps 6600 W / 16.6 amps 22 800 W / 57.1 amps AC, 3-phase Brushless permanent magnet, direct drive, variable speed AC synchrous alternator Stand Alone, Grid Connection, Direct Heating, Pumping Mechanical wind flap brake, remote emergency brake Aluminium 8 2.6 3.3 4 5.30 8.55 12.56 1 20 rmp 10 rpm 30 rpm not applicable 106 136 175 Mobile, free-standing, ballast, and non-penetrating surface towers 4 to 15 approximately 40 2 years parts and labour; 5 year extended warranty available 2 Contact Wind Simplicity for current price information All Windancers have a lockout control on the shaft and on the yaw bearing, lassoed wind blades, and cabled windtail, a permanent lightning arrestor at highest point, CSA or equlivalent approved, direct drive, small footprint. Vibration-free, noise-free, worry-free.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
13
- Catalogue of Small Wind Turbines - 2009 -
Windterra Systems Inc. (Canada) 550 - 1000 - 8th Ave.S.W. Calgary, Alberta T2P 3M7 www.windterra.com Tel: +1 866 771 9463 Fax: +1 403 543 3647 E-mail: sales@windterra.info Contact: Larry Wagner 6 years in business Domestic distribution, also available direct from factory Internationally available late 2009
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Blade Height (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (USD) Additional Info
www.folkecenter.net
ECO 1200 VAWT 1000 1200 120 Permanent magnet 3 phase Grid Connection, Stand Alone avail. summer 2009 Electrical inverter Passive air brake Fiberglass 3 2.66 2.25 5.99 12 4 22 n/a Optional Varies est. 20 + yrs 5 yrs 64 <1 $ 6000 incl: Turbine, generator, roof mount, inverter We have 6 years of research and development behind this product. Product is sold and installed by licensed resellers
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
14
First Renewable Energy Group Limited (China) Xiluo Zone, Jinquan Road, NingJin County, Shandong Province www.windenergychina.com Tel: +86-534-2901939 Fax: +86-534-8925455 E-mail: windworkerchina@yahoo.com.cn Contact: Joyce Lum Established 1997 Windworker-1000H
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2
Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Survival Tower Height (m) Product Life (years) Warranty (years)
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Tower Height (m) Product Life (years) Warranty (years)
www.folkecenter.net
WW-450 WW-750 Upwind 450 750 600 900 12, 24, 48 24, 48 Permanent magnet, brushless Stand Alone, Grid Connection
WW-300H
WW-500H
WW-1000H
300
500
1000
24
24
48
Tail furl and Electronic controller Reinforced fiber glass 3 1.4 1.8 1.54 2.54 12 3 25 35 6 20-25 3
2.2 3.80
2.5 4.91
2.8 6.15
12
7
8
9
40
35
40
WW-5000H
WW-10000H
WW-20000H
5000 48
10 000 240
20 000 480
5 19.63
7 38.46
10 78.50
12
16
18
WW-2000H WW-3000H Upwind 2000 3000 240 48 Permanent magnet, brushless Stand Alone, Grid Connection Tail furl and Electronic controller Reinforced fiber glass 3 3.2 4 8.04 12.56 9 3 25 40 9 20-25 3
-
10
12
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
15
- Catalogue of Small Wind Turbines - 2009 -
Guangzhou Hongying Energy Technology Co.,Ltd
(China)
Company Address: No.10 Yongfa Road, Huadou, Guangzhou 510800 Marketing Department: RM415.1 Building Science Park SCUT, Guangzhou 510620 www.hyenergy.com.cn HY-400L
HY-600W
Tel: +86 (0)20 36888000 Fax: +86 (0)20 36892823 E-mail: hy@hyenergy.com.cn Established in 2001 Turbines available direct from factory
HY-2000W
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Years on the market Price Additional Info
HY-3000W
HY-400L
HY-600W
HY-2000W
Upwind 400 600 2000 460 750 2600 12 / 24DC 24 / 48 DC 48 / 110 DC PMG Stand Alone Stand Alone and Grid Connection PWM or Dump-load Blade aerodynamic elastic and electromagnetic Nylon fiber 3 1.4 1.8 3.1 1.54 2.54 7.54 12 12 13 3 60 15.6 19.3 60 Guyed steel pipe 8~12 10~12 12~20 15 3 5 4 2 Contact HY Energy for current cost information HY Energy specializes in manufacturing small wind turbine generators, these machines are CE certified; ISO9001:2000 and have already sold more than 10 000 units in Europe. HY Energy has developed a series of 5 bladed low wind turbines intended for regions with an annual wind speed of less than 5m/s (at 10m height); the HY-400L (400W), the HY-1000W (1kW) and the HY-3000W (3kW).
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
16
TAOS WIND ENERGY (China) Hangzhou office: 8-1-202 Milan Apartment, Hangzhou 310003 www.taoswind.com Tel: +86 571 87291628 Fax: +86 571 87291628 E-mail: info@taoswind.com Established in 1984 Domestic and international distribution Turbines also available direct from factory
TAOS2000
Model Orientation Rated Output (W) Generator Type Applications Stand Alone Grid Connection Direct Heating Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Survival Head Weight (kg) Product Life (years) Warranty (years) Price (USD) Additional Info
www.folkecenter.net
TAOS1000
TAOS600
TAOS1000
TAOS2000
Downwind 600 1000 3-phase permanent magnet alternator, brushless 24 VDC yes no Electronic Electronic Reinforced nylon 3 1.8 2.54 12.5 2.6 60 19 15 3
2000
24 VDC
48 VDC
yes
2.0 3.14
2.8 6.15
24
43
reference Ex-factory price, includes turbine powerhead and regulator $ 585 $ 952 $ 1 530 Wind / Solar Hybrid Public-lighting System is also available from TAOS WIND ENERGY.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
17
- Catalogue of Small Wind Turbines - 2009 -
Gaia-Wind A/S (Denmark) Bautavej 1A DK-8210 Ă&#x2026;rhus V, DENMARK Tel: +45 8776 2200 / Fax: +45 8776 2201 E-mail: mail@gaia-wind.com Contact: Hans Ole Lørup, Managing Director
Gaia-Wind Ltd (Scotland) Hillington Park Innovation Centre 1 Ainslie Road, Hillington Industrial Estate UK-Glasgow G52 4RU, UNITED KINGDOM Tel: +44 845 871 4242 / Fax: +44 141 585 6301 E-mail: mail@gaia-wind.com Contact: Johnnie Andringa, Managing Director www.gaia-wind.com 19 years in business Denmark & Nordic markets: Gaia-Wind A/S UK & International markets: Gaia-Wind Ltd
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Stand Alone Grid Connection Direct Heating Pumping Controller Type Overspeed Protection
Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price Additional Info
www.folkecenter.net
Gaia-Wind 11kW Downwind 11 000 11 000 3 phase - 400V / 50 Hz or 480V / 60Hz Asynchronous induction generator Wind-diesel and wind-battery hybrid systems are possible Grid connected is the primary application for domestic or small business use Grid connected electric heating control unit available as an optional extra Grid connected electric pumping with standard pumps IC-1000 controller manufactured by Mita-Teknik (1) passive stall (2) disc brake activated by control unit (3) blade tip brakes, failsafe Glass-reinforced plastic (GRP) 2, fabricated in one piece mould, suspended in a teeter hub 13.0 133 9.5 3.5 m/s is set as start wind, can be adjusted to suit site conditions >25 is set as cut-out, can be adjusted to suit site conditions n/a Nacelle 700 kg, Blade 200 kg Self-supported, lattice or tubular, hot dip galvanised steel 18 20 design life minimum 1 >120 19 Please contact Gaia-Wind for further information The Gaia-Wind 11kW Small Wind Turbine provides high energy yield in moderate wind conditions, with reliability from more than 10 years of product development, more than 100 installed units and more than 1000 years operational experience. Gaia-Wind 11kW has been type certified to the old Danish HB-101 standard, with certification in progress to the new IEC standards for Small Wind Turbines.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
18
Vega A/S (Denmark) Horsensvej 91 Tebstrup Skanderborg 8660 www.winwind.dk Tel: +45 60143292 +45 86538600 E-mail: salg@winwind.dk vega@vega-as.dk Contact: Poul or Kurt 23 years in business Domestic and international distribution Also available direct from factory KEN 500
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (DKK)
Additional Info
www.folkecenter.net
Katie 200
Ken 500
Upwind HAWT 200 500 230 800 24 and 220 PMG Stand Alone (additional semi grid connection) Electronic with build in pure sinus inverter, with extra connection for solarpanels. Magnetic saturation, Yawing, (additional short circuit swich) (additional short circuit swich) Glassfiber 3 1.5 2.5 1.8 4.9
6 8 2.5 2 35 35 12.5 22.5 Guyed 6 15, under normal care 2 More than 1000 More than 1000 4 5 5 800 kr 9 800 kr Prices include tax (moms) and: Mastfoot, Mast, Turbine with wings, tale and generator. Controller, rectifier, charger and pure sinus wave inverter. All in one box. Additional options available: larger Charger/controller/inverter with a one way grid connection for uninterrupted power supply (about 1000 kr). The Katie 200 is a good turbine for garden, house and the sail boat. The Ken 500 is a good turbine for additional energy to the household. Both turbines are CE and ISO certified.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
19
- Catalogue of Small Wind Turbines - 2009 -
Finnwind Oy (Finland) K채rjentie 18, FI-14770 Etel채inen www.finnwind.fi Tel: +358 45 650 2156 Fax: +358 42 540 6979 E-mail: info@finnwind.fi Contact: Matti Kantonen Company established in 1993 Domestic distribution Also available direct from factory
Tuule T188
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Additional info
www.folkecenter.net
Upwind 4000 4000 88 - 400 AC 3 phase PMG Stand Alone, Direct Heating. Grid Connection available as of 2008 Auto furling Parallel glued laminated wood 3 4.9 18.8 10 2.8 none Adjustable 75 Guyed 12 and 18 20 3 The Tuule T188 is a wind generator for heating houses. It is designed to provide electricity generated from the wind to a resistive element to heat water. This heated water can then be used for space heating and hot water use. In addition to heating, combo model of Tuule T188 can be used for charging batteries and grid connection. Please visit www.finnwind.fi for more details.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
20
Oy Windside Production Ltd. (Finland) Niemenharjuntie 85 44800 Pihtipudas www.windside.com WS-0,15B
Tel: +358-208-350 700 Fax +358-208-350 701 E-mail: finland@windside.com Windside have been deveoloping and selling its own design of vertical axis wind turbines for over twenty years.
WS-4
Domestic and international distribution Turbines are also available direct from factory
WS-0,30A
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications
Controller Type Overspeed Protection Blade Material Rotor Diameter (m) Blade Height (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market
www.folkecenter.net
WS-0,15 (B, C)
WS-0,30 (A, B, C)
VAWT 108 (9A/12V) 12, 24, 48 DC / 1-400 AC PMG Stand Alone
Windside WGU-22 none required Fibre glass 0.3 0.3 0.5 1 0.15 0.3
WS-2 (A, B)
WS-4 (A, B, C)
WS-12
240 (20A/12V)
5000
Windside WGU-25/WGC-10
Stand Alone, Direct Heating, Pumping Customised
1 2 2
Aluminium 2 6 12
1 4 4
20 15 (18 for A) 20 15 (18 for A) 30 3.8 2.8 (3 for A) 2 1.5 (1.9 for A) 1 none 60 for A, 40 for B, 30 for C 30 80 400 1000 3500 These weights differ between specific models (A, B or C) Wood / metal Metal 4 minimum 50 plus 2 standard Specific breakdown of units by model not available but overall sales are in the thousands. Windside Wind Turbine models have differing construction. These differences are needed for use in different conditions. Differences are indicated by the letters A, B or C at the end of each model number. These letters indicate what conditions the models are designed for, A is for use in winds up to 60 m/s, B in 40 m/s, and C in 30 m/s.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
21
- Catalogue of Small Wind Turbines - 2009 -
Eoltec (France) 455 prom. des Anglais, Porte de l'Arenas Hall C 06299 NICE Cedex3 www.eoltec.com Fax: +33(0)488130570 E-mail: info@eoltec.com Contact: Jacques Souquet 7 years in business Domestic and international distribution
Scirocco E5.6-6
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price (EUR)
www.folkecenter.net
Upwind - passive, vane tail 6000 6000 230Vac / 50-60Hz Permanent magnet - direct drive - variable speed Stand Alone, Grid Connection, Pumping Dedicated MPPT Centrifugal stall system Epoxy / fiberglass - hollow 2 5.6 24.6 11 3 not applicable not applicable 62 205 Guyed or self supported 12 / 15 / 18 / 24 15 2 250 7 Contact Eoltec for current price information
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
22
Aerocraft (Germany) Gödecke Energie- und Antriebstechnik GmbH Am Bahnhof 12 27356 Rotenburg/W. AC-120
www.aerocraft.de Tel: +49 (4261) 9439-0 Fax: +49 (4261) 9439-19 E-amil: info@aerocraft.de
AC-752
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Height (m) Additional Info
www.folkecenter.net
AC-502
AC-120
AC-240
Upwind 120 240 12, 24 18 pole PMG Stand Alone, Grid Connection Helicopter - upward furling GFK / FRP 5 3 1.2 1.65 1.13 2.14
AC-502
AC-752
AC-1002
500
750 24, 48
1000 230
16 pole PMG Same, with Direct Heating Eclipse control
2.4 4.52
9 3 25 15 60 40 17 19 41 43 45 7 to 12 AeroCraft offers a complete system for water heating. The AC 1002 has the same technical specifications as the AC 502 / 752 „turbo“but is fitted with a 1000 W / 230 V generator and a control unit which supplies the produced energy to the electrical heating element (immersion heater). The 2400 W electrical heating element (immersion heater) is included in delivery.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
23
- Catalogue of Small Wind Turbines - 2009 -
Aircon GmbH & Co.KG (Germany) Regenerative Energieanlagen NessestraĂ&#x;e 27 26789 Leer www.aircon-international.de Tel: +49 (0)491-4544484 Fax: +49 (0)491-4544485 E-mail: info@aircon-international.de Contact: Mr. Broek 6 years in business Domestic and international distribution
Model Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price
www.folkecenter.net
-
Aircon10 S 10 000 15 000 400 Synchronous PMG "SPARK" Grid Connection Digital Active stable GFK 3 7.1 39.57 11 2.5 25 52 650 Lattice 12, 18, 24 or 30 > 20 2 >40 6 On inquiry
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
24
EasyWind GmbH (Germany) Redlingsweg 3 25842 Langenhorn www.easywind.org Tel: +49 (0)4672 77248-50 Fax: +49 (0)4672 77248-88 E-mail: mailto@easywind.org International distribution
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Price
www.folkecenter.net
EasyWind 6 AC Upwind 6000 6000 400V, 3-phase, 50 Hz Asyncronous (pole-changable) Grid Connection Passive Pitch Steel/Fiber-glass composite structure 4 6 28.27
EasyWind 6 DC 7500 7500 48VDC, 120 VDC or 240 VDC Asyncronous Stand Alone, Pumping
10.5 11.5 3 none n/a 60 363 Guyed tower 7, 13 or 19 20 2 Contact EasyWind for current price information
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
25
- Catalogue of Small Wind Turbines - 2009 -
Heyde Windtechnik (Germany) Glashütter Straße 60 OT Reinholdshain 01744 Dippoldiswalde www.heyde-windtechnik.de Tel: +49 (0) 35 04 / 61 12 80 Fax: +49 (0) 35 04 / 69 42 00 E-mail: michaelheyde@web.de Contact: Michael Heyde
Antaris 5,0 KS
8 years in business Domestic and international distrib. Turbines also available direct from factory
Antaris 3,5 KS
Antaris 2,5 KS
Antaris 2,5 KS
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (EUR)
Antaris 5,0 KS 5000 5500
4.06 12.94
11 3 Continue run in helicopter position 55 65 75 Lattice or steel tubular 8-15 20 2 32 105 3 2 Price does not include tax 4 500 € 4 675 € 1 300 € 1 300 € 1 250 € 1 590 € 1 450 € 1 450 €
Windturbine Controller for grid conn. Inverter Controller for grid conn. and heating
Additional Info
www.folkecenter.net
Antaris 3,5 KS
Upwind 2500 3500 2700 3700 400 Synchronus 3 phase PMG Stand Alone, Grid Connection and Direct Heating Own controller and SMA inverter Helicopter position, Short circuit GFK 3 3 3.5 7.07 9.62
98
9 1 ca. 7 800 € 1 400 € 1 660 € 1 600 €
Heyde Windtechnik also distributes other brands of wind turbines.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
26
SinusWind GmbH (Germany) FabrikstraĂ&#x;e 11 63633 Birstein - Lichenroth www.sinuswind.de Tel: +49 - (0)6668 / 919 45-0 Fax: +49 - (0)6668 / 919 45-1 E-mail: k.arzer@sinuswind.de Contact: Klemens Arzer Established August 2007 Domestic and international distribution
Home 1500
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Stand Alone Grid Connection Direct Heating Pumping Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price
www.folkecenter.net
Home 1500
Home 3000
Professional 5000
Upwind 1500 1700 48 Synchronous
3000 3400 96
5000 5200 96
Island system is available Grid connection system is available via 2kW heating el. via 3.5kW heating el. Possible, up to 1.5kW Possible, up to 3kW 50V - 350V Regulator 96V - 400V Regulator Pitch control over 350V Pitch control over 400V Carbon / fiberglass 3 3.2 4.2 8.03 13.84
via 6kW heating el. Possible, up to 5kW 96V - 500V Regulator Pitch control over 500V
5.2 21.22
12 3 12 60 20 55 60 Tubular (guywires not neccessary) roof top mounted, other height options are available than the ones mentioned below 5 9 20 2 ca. 300 > 100 > 200 Since August 2007 Contact SinusWind for current price information
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
27
- Catalogue of Small Wind Turbines - 2009 -
SOLAR-WIND-TEAM GmbH (Germany) Hansjakobweg 3 78112 St. Georgen/Schw. www.wind-mobil.de Tel: +49 - 07724 - 7377 Fax: +49 - 07724 - 91178 E-mail: info@wind-mobil.de Contact: Günther Hacker 15 years in business Domestic and international distribution, also available direct from factory
FLIP 150
FLIP 500
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Product Life (years) Warranty (years) Units Sold Years on the market Price (EUR)
Additional Info
www.folkecenter.net
FLIP 150 Upwind 150 300 12, 24 Permanent Magnet Stand Alone and Grid Connection Battery charger or grid inverter Stall GFK 3 1.1 0.95 13 1.8 none none All 10 25 2 250 4 Turbine: € 900
FLIP 500 500 1100 48
Grid inverter
1.6 2
2.8 15
22
3 55 0.5 Turbine: € 1800 Grid inverter: € 1000 Battery charger: € 500 Special low wind and low noise wind turbines for home grid connection. Qualitiy Made in Germany. Solar-Wind-Team distributes renewable energy products and has tested the performance of many small wind turbines.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
28
Superwind GmbH (Germany) Am Rankewerk 2-4 D-50321 BrĂźhl www.superwind.com Tel: +49-2232-577 357 Fax: +49-2232-577 368 E-mail: kk@superwind.com Contact: Klaus Krieger 20 years in business Domestic and international distribution Wind turbines are also available direct from factory
Pictured at left is a Superwind 350 installed on a Tsunami warning buoy
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (EUR) Additional Info
www.folkecenter.net
-
Superwind 350 Upwind 350 350 12 or 24 DC (48 on request) PMG Stand Alone Battery charger SCR Marine Pitch controlled (feathering) Carbon reinforced plastic 3 1.2 1.13 12.5 3.5 none none 45 11.5 various various 20 3 > 1000 Since May 2004 1 260 â&#x201A;Ź (not incl.VAT) For marine and professional use, suitable for extreme climatic conditions
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
29
- Catalogue of Small Wind Turbines - 2009 -
Thümler GmbH (Germany) 90455 Nürnberg Hans Traut Str. 25 www.aluwindrad.de www.grip.de Tel: +49 (0) 9122 - 78711 Fax: +49 (0) 9122 - 73127 E-mail: info@grip.de Contact: Manfred Thümler Not available to resellers No discounts for higher quantities See website for ordering details
Alu Windrad
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material
Upwind 6 12 DC 2 bicycle generators Stand Alone Included is a little electronic controller to load a 12V battery. Side furling Aluminum 1mm blades, fully calculated in a computer simulation under Reynolds laminar profile. 3 0.84 0.55
# of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Tower Type Units sold Years on the market Price (EUR) Additional Info
www.folkecenter.net
5.5 3 10 to 12 The vertical axis of the rotor is fastened with 2 screws to a pipe. 3000 30 80 €, shipping cost out of Germany with UPS is 20 € This turbine is very small and is not designed to produce large amounts of power, it is a toy intended for gardens but can also be used as a teaching device in schools.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
30
VENCO Power GmbH (Germany) (Sales Office) Luisenburgweg 29 Doehlau 95182 www.vencopower.com Tel: +49 9281 470271 Fax: +49 9281 74119 Contact: Mr. Reinhard Caliebe Turbines are available internationally
VENCO-Twister-1000-T
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Blade Height (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Warranty (years) Additional Info
www.folkecenter.net
VENCO-Twister300-T
VENCO-Twister1000-T
VENCO-VertikonH50
Vertical Axis 300 1000 300 1200 12/24 VDC, 0 to 70 0 to 400 3 phase PMG Stand Alone, Grid Connection Microcontroller guided
50 000 55 000 Asynchronous Grid Connection Variable via Microprocessor
Epoxi glass and carbon resin 3 1 1.9 1 1.9 1 3.61 14 3.5 25 50 52 Free standing monopole
12 12.5 150
12 2.5 13
20 150
Lattice 35
2 The robust construction is without wearing parts. It is maintainance free and works reliably even under extreme conditions. The Twister Series is controlled by a self sustained security system (pat. Pending) to avoid overspeed, overvoltage, phase failure, and excess temperature of generator.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
31
- Catalogue of Small Wind Turbines - 2009 -
WES energy GmbH (Germany) Österstraße 15, 25693 St. Michaelisdonn www.wes-energy.de Tel: +49 (0)4853 - 88 1 98 0 Fax: +49 (0)4853 - 88 1 98 99 E-mail: info@wes-energy.de Contact: Ludolf Ibs 10 years in business Wind turbines available in 2009
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price (EUR)
www.folkecenter.net
-
WESpe Downwind 5000 5500 370 V AC, 500 V DC 3 phase PMG Stand Alone, Grid Connection, Direct Heating, Pumping WES-Controller Mechanical Stall Aluminium 4 4.5 15.9 11 3 20 50 200 Guyed Tilt-Up 18 >20 2 10 1 € 20 000
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
32
Energotech S.A. (Greece) 602a Vouliagmenis Ave. 164 52 Argyroupoli Athens Postal address: PO Box 72 509 164 01 Argyroupoli Athens www.energotech.gr Tel: +30 - 210 - 99 59 021 Fax: +30 - 210 - 99 59 022 E-mail: energogr@otenet.gr Founded in 1993
Turbines are available direct from factory
BF 1 K
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Additional Info
www.folkecenter.net
BF 1 K
BF 3 K
BF 6 K
Downwind 1000 3000 6000 1500 3500 7000 12, 24, 48 DC for battery charge, or 230 AC for grid connect 3 phase Synchronous PMA, multi pole Stand Alone, Grid Connection Automatic battery charger with wide range voltage input (10 â&#x20AC;&#x201C; 125 VDC) Down wind orientation - blades are pushed together by strong wind Carbon epoxy / inox steel 3 3 4.5 4.8 7.06 15.9 18.1 10 3 non-stop 12 55 21.5 56 78 Guyed pipe 12 The line of Wind generators from ENERGOTECH with the name butterfly (bf) incorporates 25 years of experience. Bf is a wind generator drawn entirely from the beginning taking into consideration the most recent technological developments and modern materials, It is intended to function for a long time interval without maintenance.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
33
- Catalogue of Small Wind Turbines - 2009 -
UNITRON ENERGY SYSTEMS Pvt. Ltd. (India) PLOT NO. 25, SANJAY PARK, AIR PORT ROAD, PUNE - 411 032 www.unitronenergy.com Tel: +91-20-2 6687006 +91-20-2 6684399 E-mail: unitron@pn3.vsnl.net.in Contact: Mr. P. Ravindranath Over 11 years in business Domestic and international distribution Turbines also available direct from factory
Model Orientation Rated Output (W) Peak Output (W) Applications Stand Alone Grid Connection Direct Heating Pumping Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Furling Survival Head Weight (kg) Tower Height (m) Product Life (years) Warranty (years)
www.folkecenter.net
UE 6 LV / HV
UE 15 LV / HV
UE 33 LV / HV
UE 42 LV / HV
Upwind 650 750
1500 1700
3300 3650
4200 4600
yes yes
yes yes yes
yes yes yes yes
4.65 16.97
4.90 18.85
77 15 to 25
89
yes
AC Dynamic / Manual stop Carbon Fibre Reinforced 3 2.2 3.2 3.80 8.04 10.5 2.7 11.5 55 23 12 to 18 ~ 20 3
-
34 15 to 20
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
34
Vaigunth Ener Tek (P) Ltd (India) No-20 Rajesh Nager Main Road Narayanapuram, Pallikaranai Chennai, India - 600100 www.v-enertek.com Tel: +91-45575552 +91 45575559 Fax: +91-45575551 E-mail: info@v-enertek.com Contact: Manoharan.S 12 years in business Domestic and international distribution Turbines also available direct from factory
AR-1000W
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (USD)
AR-200W
FRP 3 1.85 2.69 8 3 23 70 25 Guyed 6 20 3 650 7 $375
www.folkecenter.net
AR-500W
Upwind 200 500 240 600 12 DC 24 DC PMDC Stand Alone Micro processor Governer
-
AR-1000W
AR-5000W
AR-30000W
1000 1400 48 / 110 / 440
5000 6500
30 000 33 000 440 Brush Type Grid Conn.
Stand Alone, Grid Connection
Governer and Electromagnet
3.2 8.04
4.2 13.85
6.8 36.3
13.5 143
8.2
8.5
9.3
10.5
35 8
110 225 Guyed or Lattice 12 18
550 Lattice 25
450
600
25 3
500
Price includes: Turbine system & Charge controller $950 $2000 $7500
Nordic Folkecenter for Renewable Energy
-
$27 500
Tel: +45 97 95 66 00
35
- Catalogue of Small Wind Turbines - 2009 -
Westwind Wind Turbines J.A. Graham Renewable Energy Services
(Northern Ireland) 3 Carmavy Road Crumlin Co. Antrim BT29 4TF www.westwindturbines.co.uk Tel: +44 (0) 28 9445 2437 Email: info@westwindturbines.co.uk Turbines have more than 25 years of operational experience and development International distribution see website for distributor locations
20 kW
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Years on the market Additional Info
www.folkecenter.net
3 kW
5 kW
10 kW
20 kW
Upwind 3000 5000 10 000 3300 5500 11 000 48, 96, 110 or 120 DC 110 or 120 DC 3 phase PMG Stand Alone, Grid Connection, Direct Heating PWM shunt regulator Auto tail furl Pultruded fiberglass 3 3.7 5.1 10.75 20.42
6.2 30.18
20 000 22 000 240 DC
Rotor pitch / auto tail furl Carbon epoxy 10.4 84.91
14 3.5 3 none 16 50 190 200 380 750 Guyed tilt-up 18 to 30 20 Over 25 Westwind have supplied turbines, towers, and turbine controllers for use in many different applications around the world since 1984.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
36
Blu Mini Power Srl (Italy) Piazza Cinque Giornate, 10 20129 Milano www.bluminipower.it Tel: +39 02 55183007 Fax: +39 02 55184053 E-mail: info@bluminipower.it Contact: Mr. Andrea Longo 4 years in business
MaestraleForza 20
Turbines are available direct from factory Energy Ball V100 and V200 are available for the domestic market
Energy Ball V100
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years)
www.folkecenter.net
Energy Ball V100
Energy Ball V200
MaestraleForza 20
Upwind 500 2500 230 230 Synchronous PMG Stand Alone and Grid Connection
6 1.1 1
5 1.98 3.1
2
3
40 30 Tubular mono pole 9m standard, 11m optional
40 70
20 000 400 Grid Connection Passive (Tilt up) Composite Carbon Fiber 3 8.15 52.14 12 3.5 42 42 400
12m standard, 15m optional
18m standard, 24m optional 20
2
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
37
- Catalogue of Small Wind Turbines - 2009 -
Jonica Impianti SocietĂ Cooperativa (Italy) Via Poerio, 226 74020 Lizzano (Ta) www.jimp.it Tel: +39 (0) 99 9551208 Fax: +39 (0) 99 9558581 E-mail: jimpcoop@tin.it Contact: Mr. Nicola De Luca
15 years in business Domestic and international distribution Wind turbines are also available direct from factory
JIMP25
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (EUR)
12 3.5 37.5 n/a 42.5 Nacelle: 750, Rotor: 100 Steel 18 - 24 - 30 20 1 120 9 38 500 â&#x201A;Ź (wind turbine + inverter AC/DC/AC ex-works supply)
www.folkecenter.net
-
Upwind 25 000 (option 20 000) 25 000 (option 20 000) 220 / 380 AC Synchronous Grid Connection Variable frequency Passive pitch and stall control Composite fibre glass 3 10 78.5
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
38
Ropatec (Italy) Via Zuegg 38/40 39100 Bolzano www.ropatec.com Tel: +39 (0) 471 052010 Fax: +39 (0) 471 052012 E-mail: info@ropatec.com Contact: Alessandro Bortolotti Domestic and international distribution Turbines also available direct from factory
Mega Star Vertical
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (VAC) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Rotor Height (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (EUR) Additional Info
www.folkecenter.net
Easy Vertical VAWT 1000 1000 190 Synchronous Stand Alone, Direct Heating Power curve
Simply Vertical
Maxi Vertical
Mega Star Vertical
3000 3600 225
6000 6000 185
20 000 20 000 300
Stand Alone, Grid Connection, Direct Heating, Hybrid
Grid Connection
Short circuite brake Carbon-Fiberglass 3 1.8 1.15 2.07
Fiberglass 3.3 2 6.6
5 8.5 5.8 49.3
4.7 2.5 11.75
14 3
12.5 18
40 135 450 760 3600 Monomast 11 30 2 46 32 26 0 1.5 0 € 4 800 (rotor+ € 12 800 € 18 600 € 58 000 battery charger) (rotor+inverter) (rotor+inverter) (rotor+inverter) The MSP-Controller has been developed to operate a complete hybrid off-grid system, it is a 48V battery charger for the WindRotor with integrated solar charger and 4500W off-grid inverter. It offers also the possibility to connect a back-up Genset system. The heating system consists of the turbine, the heating controller HotMax and an electrical resistance. The heating controller, based on a system of pulse wide modulation, gives the resistance exactly the amount of energy the turbine can deliver in the given wind situation. This system heats water with electricity directly from the turbine, reducing the use of combustion fuels.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
39
- Catalogue of Small Wind Turbines - 2009 -
Loopwing Co.,Ltd (Japan) 7th Floor, Taiyo Bldg., 3-3-3 Misakicho, Chiyoda-ku, Tokyo 101-0061 www.loopwing.co.jp Tel: +81-(0)3-3237-0680 Fax: +81-(0)3-3237-0681 E-mail: supporting.lwg@loopwing.co.jp Established September 3, 2003
TRONC Street light Unit
Model Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection
Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Head Weight (kg) Product Life (years) Warranty (years) Additional Info
TRONC
µ2850
µ4800
µ6670
Street light Unit 438
2000 5000 2000 5000 12/24VDC ~370VDC (± 200VAC) Brushless DC Brushless DC (Coreless AC) Stand Alone is the main application 1. Elc. Mag. brake 1. Deflection 2. Deflection 2. Elc. Brake 3. Self-stalling 3. Self-stalling 4. Air brake Alluminum alloy 3 1.5 2.85 4.8 1.77 6.38 18.09 12 2 20
11 000 11 000
6.67 34.92
12.8 2 14 107
230 1200 20 3 The µ series of turbines employ an insulated control system, snow-repellent paints, oil-bath bearings and a sealing technology taken from marine engineering, they can operate at as low as -40 degree Celsius (-40F). TRONC is an independent power supply unit that features a hybrid generation system of a PV panel and Loopwing Wind Turbine, Theta 1500 (1.5m diameter). The system supplies power to small electronics such as lights, clocks, and telecommunication devices. Using an optional built-in inverter, the power can be extracted through an outlet (socket) in case of emergencies.
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
40
Wind-Smile Co., LTD. (Japan) 7-4 Nihonbashi Nakasu, Chuo-ku, Tokyo 103-0008 www.wind-smile.com Tel: +81-3-3663-7733 Fax: +81-3-3663-7789 E-mail: info_kfl@kbkfrontier.co.jp Contact: KBK Frontier Co., Ltd Established November 15, 2007 Domestic and international distribution Turbines also available direct from factory
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (VDC) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Blade Height (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price
www.folkecenter.net
Wind Smile Generator 200W
Wind Smile Generator 1kW
Wind Smile Generator 5kW
VAWT 200 1000 5000 200 1000 5000 12 (standard), Available on request 24 or 48 (option) Permanent-magnet core-less synchronous generator Stand Alone (with Stand Alone (with battery pack - option), battery pack - option) Grid Connection (with power conditioner - option) DC/DC convertor Electrical protection Corrosion-Resistant Aluminum Alloy 4 4 3 1 1.5 3.2 1 2.5 2.5 1 3.75 8 12.5 1.3
13 2.5
13.5 3 50
60 50 200 Tubular monopole free standing 1.4 3.2 20 years (with appropriate regular maintenanceďź&#x2030; 1 30 20 4 Available on request
-
Nordic Folkecenter for Renewable Energy
1500 3
5 2
-
Tel: +45 97 95 66 00
41
- Catalogue of Small Wind Turbines - 2009 -
Zephyr Corporation (Japan) Headquarters: Hatsudai Center Bldg. 51-1, Hatsudai 1-chome, Shibuya-ku, Tokyo, 151-0061 www.zephyreco.co.jp E-mail: zephyr81z1000@zephyreco.co.jp Established June 11, 1997
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type
Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Additional Info
www.folkecenter.net
Airdolphin Upwind 1000 3200 25 DC Synchronous, three-phase, permanent magnet Stand Alone, Grid Connection Built-in Zephyr-Original Power Management System (ZPMS), with: 1. Power-Assist Function 2. Stall Mode 3. Safety Control 4. Battery Charge Management 5. Data Communication System Side furling, Swing rudder system Carbon-fiber skin 3 1.8 2.54 12.5 2.5 50 20 65 17.5 Guyless tilting, tower kit for rooftops, or the zephyr hybrid tower for wind / photovoltaic combination The Airdolphin comes with the "Silent Disrupter Blade", a number of thin grooves on its surface significantly reduces air flow noise.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
42
Craftskills East Africa Limited (Kenya) P.O. Box 57357 CODE 00200 Nairobi www.craftskills.biz Tel: +254 724 324273 E-mail: windcruiser@craftskills.biz Contact: Simon Mwacharo 10 years in business Contact Craftskills for distribution methods
WindCruiser
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (USD)
HAWT Upwind 3000 3500 48 PMG Stand Alone, Grid Connection and Pumping Hybrid wind/solar Hydraulic Glass fiber 3 4 12.56 12 2 65 Lattice 12 20 2 70 8
Turbine Inverter Batteries Tower Total
www.folkecenter.net
$5 200 $2 533 $1 333 $1 533 $10 600
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
43
- Catalogue of Small Wind Turbines - 2009 -
Fortis Wind Energy (The Netherlands) Botanicuslaan 14 9751 AC Haren www.fortiswindenergy.com E-mail: klimbie@fortiswindenergy.com Contact: Balthasar Klimbie 25 years in business Domestic and international distribution
Passaat
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Stand Alone DC Grid Connection AC Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Furling Head Weight (kg) Tower Type Tower Height (m) Units sold Years on the market Price (EUR) for Battery charging for Grid connection
www.folkecenter.net
Alize
Passaat
Montana
Alize
Upwind 1400 1400
5000 5800
10 000 12 000
12, 24, 48, or 120 1x230 1x230 or 3x400 Direct drive PMG Stand Alone and Grid Connection Rectifier / overvoltage protection by dumpload switching Ecliptic - hinged vane Fiberglass reinforced epoxy 3 3.12 5 7 7.64 19.63 38.47 16 17 13 3 2.5 3 14 14 16 45 150 245 Depends on site; guyed, lattice or tubular free standing towers 18 to 36 >2700 >1100 55 24 19 9 Prices for wind turbine only, other components and VAT are not included. € 3 216 € 9 009 € 18 626 € 3 615 € 8 632 € 18 626
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
44
Hetronix Group of Companies (The Netherlands) Derde slagen 12, 5233TC 's-Hertogenbosch www.hetronix.eu Tel: +31 73 644 0758, +31 6-531 08 492 Fax: +31 73 642 9047 E-mail: info@hetronix.eu Contact: Hans HJC Teunisse 3 years in business Domestic and international distribution Turbines also available direct from factory
KEITH_2K
Model Orientation Rated Output (W) Peak Output (W) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (EUR)
HAWT Upwind 2000 3000 3 phase / 18 pole Stand Alone, Grid Connection, Direct Heating Side-furling Reinforced carbon glass-optic fiber composite 3 2.47 4.8 12.5 3 50 50 Tornado windspeeds 38 Different versions available various 15 3 247 2 10 000 â&#x201A;Ź ALL-IN retail price, includes: KEITH_2K with any Pole system up to 15 m., Inverter, Control Box, fuse box, grid-connected Installation, Hetronix ACTIVE 3 years warranty program Award-winning contract from TaiPower Energy company. Tested & Proven: More than 3 years continued function on Taiwan University (Tornado Alley). Durable Quality product with easy installation.
Additional Info
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
45
- Catalogue of Small Wind Turbines - 2009 -
Turby B.V. (The Netherlands) Heuvelenweg 18 7241 HZ Lochem www.turby.nl Tel: +31(0) 573 256 358 Fax: +31(0) 573 254 420 E-mail: info@turby.nl
Turby
Model Rated Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection
2500 250 AC 3 Phase Synchronous PMG Grid Connection Two independent detection systems each triggering an independant brake action: - Generator frequency measurement in the converter - Generator voltage measurement on the generator terminals Composite 3 2 2.65 5.3
Blade Material # of Blades Rotor Diameter (m) Blade Height (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type
14 4 14 55 136 Galvanised or stainless steel roof top mounted, spring supported or free standing 5 or 6, or 7.5 or 9 "Turby is especially designed for use on the rooftops of high buildings. Turby is able to utilize wind from any direction, including winds that are constantly shifting."
Tower Height (m) Additional Info
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
46
Wind Energy Solutions (The Netherlands) De Veken 206, 1716 KJ Opmeer www.WindEnergySolutions.nl Tel: +31-226-425 150 Fax: +31-226-425 159 E-mail: info@WindEnergySolutions.nl 5 years in business Domestic and international distribution Turbines also available direct from factory
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price Certification Additional Info
www.folkecenter.net
WES5 Tulipo Upwind 2500 2500 400V/50Hz 3 phase or 400V/60Hz 3 phase Asynchronous generator / variable speed IGBT converter Grid Connection PLC Fixed pitch stall & rpm sensors Glass reinforced epoxy 3 5 19.6
9 3 20 59.5 (IEC61400-1 class 2) Tubular steel 12 15 2 30 5 Contact WES for current price information IEC 61400-22 by UL The WES5 Tulipo, a so-called â&#x20AC;&#x153;urban turbineâ&#x20AC;?, is a small wind turbine especially designed for use in urban environments. This modern turbine is the only small Dutch turbine with a UL Safety Certificate. Due to the specially designed blades and its relatively low rotational speed it has a very low noise emission: it emits only 35dBA at 20 meter distance from the source. The vibrations level is also very low. It is light, has a very attractive design and is easy to maintain. These factors make the WES5 Tulipo an ideal wind turbine for the urban area.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
47
- Catalogue of Small Wind Turbines - 2009 -
Gusto Energy Ltd (New Zealand) www.gustoenergy.com Mobil: +64 21 522224 E-mail: duncan@gustoenergy.com Contact: Duncan McMillan 10 years in business Turbines are available direct from factory
Gusto 2.0 kW
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Years on the market Price Additional Info
www.folkecenter.net
Upwind 1800 2000 Variable speed, variable frequency, variable voltage 32 pole, 3 phase PMG Stand Alone, Grid Connection, Direct Heating Suitable for various controllers Passive side furling Fibreglass 3 3.2 8.04 13 3.5 17 Tested in excess of 25 m/s (~50 Knots) 125 Tilt-up guyed 13 or 20 Indeterminate Two First machine to market in 2003 Price on application Machine is designed for harsh wind environment in coastal areas, typically found in NZ. Machine can be turned off in any windspeed and braked. Machine has four sealed rolling bearings, large carbon-copper brushes, and a fully sealed alternator.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
48
DENERTEC S.A.C. (Peru) Francisco de Cuellar 635, Urb. San Idelfonso 1, Surco (Lima33) Lima, Peru www.denertec.com Tel: (+51-1) 628-1727 (+51-1) 9-9349-1751 E-mail: rcuba@denertec.com Contact: Rafael Cuba (Mechanical Engineer, General Manager) 8 years in business Wind turbines are available direct from factory
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price Additional Info
www.folkecenter.net
WG-200 Upwind 200 300 12, 24, 48 DC Direct drive PMG Stand Alone, optional: Grid Tie and Water Pumping Shunt, PWM (optional) Furling tail Wood (cedar, pine), Fiberglass 3 1.71 2.3 9 2.5 11 32 30 Tubular 9, 12 or 18 15 (estimated) 2 3 WG-200s, 12 Technological Packages, 2 WT development projects 6 Please contact us for a quotation * DENERTEC S.A.C. at the present manufactures Windmills and Permanent Magnet Generators under request, according to your specifications. * We can work on the design and development of Wind Turbines and PMGs according to the requirements of our clients, and also in the stages of construction and testing of prototypes and built units. * Wind Park project development activities and Training Workshops are also part of our expertise.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
49
- Catalogue of Small Wind Turbines - 2009 -
Enwia (Poland) ul. Lawendowa 15 71-006 Szczecin www.enwia.pl Tel: +48 (91) 48 31 997 Fax: +48 (91) 48 34 958 E-mail: info@enwia.pl
Enwia E12
Enwia E40
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Head Weight (kg) Tower Type Tower Height (m) Price Additional Info
Enwia E12 Upwind 12 000 12 000 3-phase alternating current Umax=400 V Synchronous PMG Direct Heating, Grid Connection Side furling 3 5.98 28.07
Enwia E40 40 000 40 000
10 78.5
13 14 3.5 20 400 Tubular or lattice 12, 18, 24, 30 Contact Enwia for pricing The Enwia wind turbines produce electrical energy to supply households, farms, hotels, pensions, companies... For heating purposes Enwia has developed a hybrid heating system that converts produced power from the wind turbines into warmth by the use of heater elements. The heart of this concept is the water storage accumulator, which has a capacity of 1000 litres for the central heating of the house via radiators. The water accumulator also has an enamel coated container which stores 160 litres of water for the mains supply of hot water to your taps. The heated elements also have the option to be fed from external sources like solar and heater pumps via two coils connected to the turbine. Enwia also produces the Enwia E100 100kW.
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
50
SCIENMET GROUP (Russia) Russia, Moscow, 117321 POB 118 www.scienmet.com Tel: +7 (495) 335 44 69 Fax: +7 (495) 425 90 88 E-mail: info@scienmet.com Domestic distribution Turbines also available direct from factory
Model Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Price (EUR)
www.folkecenter.net
SW 2/5 2000 5000 220 PMG Grid Connection Automatic Fiber glass 3 4.5 16 8 3 25 60 100 Three sections 12 25 1 12 935 â&#x201A;Ź (FCA Moscow) Delivery set includes: - Rotor (propeller) (three blades, a hub with an RPM regulator); - Head with a band wheel shaft, with a permanent magnet slow-speed generator; - Support-rotating unit with a current collector; - Yaw damper; - Three sections tower with bracings; - Embedded parts of the foundation; - Regulated charging unit; - Converter with the power output up to 5 kW; - Lifting unit
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
51
- Catalogue of Small Wind Turbines - 2009 -
ZAO “WindPower Company” (Russia) B.60, Polyustrovsky 195197 St-Petersburg www.breezex.ru Tel: +7 (812) 324-4888 Fax: +7 (812) 324-4884 E-mail: wind@electrosfera.ru Company began operation in 1999
Model Orientation Rated Output (W) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Price Additional Info
www.folkecenter.net
Breeze 5000 Upwind 5000 3-phase permanent magnet generator Stand Alone is the main application Side furling Fiber-glass composite 3 5 19.63 12 3 50 230 Guyed steel tube or lattice 14 standard, other options available 20 1 On request Breeze 5000: Designed to provide outside lighting, space and water heating in regions with annual wind speed up from 7 m/s. Breeze Leader: Designed to provide electric power in regions with annual wind speed up from 4 m/s. Breeze Diesel+: Designed to provide el. power in regions with diverse wind speed, even if it’s less than 3 m/s. It can work as an add-on to a power grid.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
52
Proven Energy (Scotland) Wardhead Park Stewarton KA3 5LH Scotland, UK www.provenenergy.co.uk Tel: +44 (0)1560 485 570 Company established in 1980 Proven 6
Domestic and international distribution
Proven 2.5
Model Orientation Rated Output (W) Generator Type Applications Stand Alone Grid Connection Direct Heating Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m)
www.folkecenter.net
Proven 15
Proven 2.5
Proven 6
Proven 15
Downwind 2500 6000 Brushless direct drive PMG
15 000
24 or 48 VDC 48 VDC 230 VAC 50Hz or 240 VAC 60Hz 240 VAC Above 12m/s blades twist to limit power Polypropylene Glassthermoplastic Composite 3 3.5 5.5 9 9.62 23.75 63.59 12 2.5 none 12 70 190 600 1100 Tilt-up, tapered, self-supporting, no guy wires (Taller guyed towers also available on request) 6.5 or 11 9 or 15 15 or 25
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
53
- Catalogue of Small Wind Turbines - 2009 -
Renewable Components (Scotland) Unit 3, Acredale Ind Est Eyemouth TD14 5LQ www.renewablecomponents.com Tel: +44 (0) 1890 750099 E-mail: info@renewablecomponents.com sales@renewablecomponents.com
MiniWind 1100
MiniWind 2200
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Warranty (years) Price (GBP) Additional Info
www.folkecenter.net
MiniWind 1100 Downwind 1100 24 and 48 3-phase PMG Stand Alone Stall control PAG (50% Glass-filled Nylon) 6 1.8 2.54 12 3.8 20 65 30 50mm diam. 2
MiniWind 2200 2200 24, 48 and 300 Stand Alone, Grid Connection
40
Price includes turbine, VAT & UK Delivery ÂŁ1 495 ÂŁ1 995 The MiniWind 1100 is designed for low wind sites, or inland locations. The MiniWind 2200 is designed for high wind sites, or coastal locations, where wind speeds regularly reach gale force. The hub system allows the blades to be mounted at different angles, giving huge flexibility in "matching" the turbines performance to best suit the most common wind strengths associated with any particular site.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
54
Renewable Devices SWIFT Turbines Ltd (Scotland) SAC Bush Estate, Edinburgh, EH26 0PH UK www.renewabledevices.com Tel: +44 (0)131 535 3301 Fax: +44 (0)131 535 3303 E-mail: swift@renewabledevices.com Contact: Alex Howell, Head of Sales 7 years in business Domestic and international distribution Turbines also available direct from factory
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Head Weight (kg) Tower Type Product Life (years) Warranty (years) Price (GBP) Additional Info
www.folkecenter.net
SWIFT Wind Energy System Upwind horizontal axis with patented diffuser ring 1500 1500 Territory Specific Brushless PMG Stand Alone, Grid Connection, Direct Heating SWIFT Invertor Mechanical and electrical safety systems Injection moulded nano-fibre reinforced polymer 5 2.12 3.53 12.5 3.4 22 18 50 Custom designed mounting system for building mounted application. Stand alone wooden pole. 20 2 Site & country dependent - approx ÂŁ5500 per system excluding installation The SWIFT Wind Energy System is the world's first building mountable wind turbine with unique patented aerodynamic technology for unprecedented silent, safe, efficient operation. With installations worldwide, the SWIFT is currently providing clean green renewable energy to homes, businesses and community groups - reducing our dependence on the national grid and helping to safeguard the environment for future generations.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
55
- Catalogue of Small Wind Turbines - 2009 -
Scoraig Wind Electric (Scotland) www.scoraigwind.com Contact: Hugh Piggott E-mail: hugh@scoraigwind.co.uk 28 years in business More Information at; www.blueenergygroup.org www.windchasers.ca www.enewsbuilder.net/whatworks/e_article 000433512.cfm?x=b5h94Gg,b2r0Wrcc www.fieldlines.com/section/homebrew Distribution via the Scoraig website
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (ft) Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Warranty (years) Price (GBP)
Additional Info
www.folkecenter.net
1200
1800
2400
3000
3600
4200
350 700 800 Can surge to roughly double the rated 12, 24, 48 V battery or grid tied inverter Axial flux neodymium permanent magnet Stand Alone, Grid Connection, Direct Heating None included Furling tail Wood 3 4 6 8 10 1.2 1.8 2.4 3 1.13 2.54 4.52 7.07
1000
1000
12 3.6 10.18
14 4.2 13.85
Upwind 200
12 11 11 10 10 9 3 none At around rated windspeed Unknown Variable Usually a guyed tower Depends on site none £12.00 including postage in the UK £13.00 including postage in Europe £14.00 including postage Worldwide The new 2009 edition "Wind Turbine Recipe book" is a 65 page manual with step by step instructions on building six sizes of axial flux alternator, and blade carving and metal works. Available either in metric or English units: The English units edition is for readers who buy 2" x 1" x 1/2" magnets and AWG wire sizes. The metric edition uses metric measures of wire size and the magnets are 46 x 30 x 10 mm.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
56
Windsave Ltd (Scotland) Milnpark Trading Estate 10 LambhillQuadrant Kinning Park, Glasgow G41 1SB www.windsave.com Tel: +44(0) 800 707 6208 Fax: +44(0) 141 420 7401 Email: info@windsave.com Windsave Ltd. was formed in January 2002 Domestic distribution
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Product Life (years) Warranty (years) Years on the market Price (GBP) Additional Info
www.folkecenter.net
WS 1200 Upwind, Micro-Wind Turbine System 1000 1250 AC Mains Voltage 230 Nominal Permanent Magnet Generator Grid Connection: Electricity is connected directly into house / no batteries 'Plug-&-Saveâ&#x201E;˘' Solid State DC to AC Electronic Inverter Furling PAG Material (Polyamide glass) 3 1.75 2.4 12.5 3.5 to 5 @ hub height 14 to 15 @ hub height 16 - full furl up to 52.5m/s @ 10 second gusts 25kg This Weight Excludes Support Pole & Brackets Building Mounted Min. 10 years 2 6 Fully Installed Price ÂŁ1 898 inclusive of 5% VAT (For Domestic customers only, based on a standard installation, subject to site assessment.) The Windsave micro-wind turbine system is designed to supplement the supply of electricity drawn from the National Grid. It is suitable for domestic and commercial premises and can be utilised in both rural and urban settings. The system is sold as a fully installed product. Please contact Windsave's Commercial Contracts Department for further information and pricing on Commercial, New Build, Schools and Large Scale Developments.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
57
- Catalogue of Small Wind Turbines - 2009 -
African Wind Power (South Africa) www.africanwindpower.com Tel: +27 84 4444118 Fax: +27 84 4444118 E-mail: wtdist@mweb.co.za Contact: Oloff Smyth 25 years in business Domestic and international distribution Wind turbines also available direct from factory
AWP 3.7
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life Warranty (years) Units Sold Years on the market Price Additional Info
www.folkecenter.net
Upwind 1500 W at 48V - 2000 W in 110/220V Inverter Grid Connect System 3 Phase 'Wild' AC, 0-100Hz, 12V, 24V, 36V, 48V, 96V, 110/220V 30 Pole (Ceramic Magnet) Rotor, Laminated Axial Stator Stand Alone, Grid Connection, Direct Heating, Pumping Diversion, turbine side, high side switching Side Furling Gravity Return Yaw System GRP Composite design 3 3.7 10.75 12 3 15 9 60 120 Tilt Up Guyed 8, 14, 20 and 26 15 years 2 (5 years extended) >700 >10 Contact African Wind Power for a quote AWP manufactures a range of turbines based on the 'Heavy Metal School' philosophy - long lasting heavily built machines with large diameter, low RPM rotors that capture maximum energy starting in low wind speeds. The AWP 3.6 made a name for itself from the 3.6 meter diameter rotor's quiet performance, and huge energy delivery in low and moderate winds which other small diameter, high RPM machines ignore. This machine has been improved and is now the AWP 3.7 (3.7 meter diameter rotor).
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
58
Kestrel Wind Turbines a subsidiary of: Eveready
Diversified Products (Pty) Ltd
(South Africa) Eveready Road Struandale Port Elizabeth Postal: PO Box 3191 North End Port Elizabeth, 6056 www.kestrelwind.co.za Tel: +27 (0) 41 401 2500 (board) Fax: +27 (0) 41 394 5066 E-mail: kestrel.sales@eveready.co.za kestrel.admin@eveready.co.za Contact: Tracy Vosloo
e300
11 years in business Domestic and international distribution also available direct from factory see website for more details e220
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (VDC) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Years on the market
www.folkecenter.net
e150
e220
e300
i
e400
i
HAWT Upwind 600 800 1000 3000 650 850 1150 3300 48*, 200 and 300 12, 24, 36*, 48, 110* and 200 (* available on request) Permanent-magnet Axial flux brushless Stand Alone, Stand Alone, Grid Stand Alone, Grid Connection, Grid Connection Conn., Pumping Direct Heating, Pumping Shunt or Dump Shunt ONLY Rotor Turbulence Pitch Control Fibre glass 6 3 1.5 2.2 3 4 1.77 3.8 7.07 12.57 13 12.5 2.8 2.5 n/a n/a >40 30 45 Scissor or Guyed 9 - 15 20 2 years (extendable) since 1999
-
11 2.5
11 2.8
75
150 Tripod 12 or 15
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
59
- Catalogue of Small Wind Turbines - 2009 -
Turbex (South Africa) P.O.Box 273 Harrismith 9880 www.turbex.co.za Tel: +27 827738496 Fax: +27 58 6222019 E-mail: sales@turbex.net Turbex started development in the seventies, and now have twenty years of experience and thousands of machines installed throughout Southern Africa.
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Furling Survival Tower Type Tower Height (m) Warranty (years) Additional Info
www.folkecenter.net
T330 T460 T550 Upwind 1500 3000 4500 12 - 240 36 - 240 48 - 600 3 phase PMA, base mounted inside the tower Stand Alone, Grid Connection, Pumping Automatically feathers out of strong winds 36 42 48 3.3 4.6 5.5 8.55 16.61 23.75
T780
T1100
10 000 110 - 600
20 000 110 - 600
48 7.8 47.76
54 11 94.99
11.6 12 2.1 12 42 Lattice self supporting 6 to 30 9 to 30 12 to 30 18 to 39 24 to 39 2 The Turbex machines were developed primarily for water pumping, using rotary borehole pumps. They can be used to generate electricity by installing a generator inside the tower. These machines can simultaneously generate electricity and drive a helical screw pump or any other rotary device.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
60
Winglette Wind Machines CC (South Africa) Location and deliveries: 9 Badenhorst street, Harrismith, 9880 Mailing address: P.O.Box 583, Harrismith, 9880 www.Winglette.com Tel: +27 586231836 +27 827738496 Fax : +27 58 623 1836 E-mail: info@winglette.com Contact: Hans / Thys 14 years in business Domestic and international distribution Wind turbines also available direct from factory
W03
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price
www.folkecenter.net
Upwind 3000 3600 24, 36, 48, 150, 240 PM alternator Stand Alone, Grid Connection, Direct Heating, Pumping Dump resistor Furling Tail Glass fibre 3 3.6 10.2 11.7 3.4 12 11.7 42 85 Lattice 9, 12, 15, 18, 24 25 2 >120 3.5 Contact Winglette for current price information
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
61
- Catalogue of Small Wind Turbines - 2009 -
Bornay Windturbines (Spain) P.I. RIU, Cno. del Riu, s/n 03420 Castalla (Alicante) www.bornay.com
Inclin 600
Tel: +34 965 560 025 +34 966 543 077 Fax: +34 965 560 752 E-mail: bornay@bornay.com
Inclin 1500
40 years in business Domestic and international distribution
Inclin 3000
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Furling Head Weight (kg) Product Life (years) Warranty (years) Additional Info
www.folkecenter.net
Inclin 6000
Inclin 600
Inclin 1500
Inclin 3000
Inclin 6000
Upwind 600 1500 3000 600 1500 3000 12, 24, 48 24, 48, 120, 300 3 phase PMA Stand Alone, Stand Alone, Grid Connection, Pumping Pumping Automatic tilt up Fiberglass and carbon fiber 2 2 2.7 3.7 3.14 5.72 10.75
6000 6000 48, 120, 300
3 3.7 10.75
11 12 3.5 13 14 14 15 38 42 125 150 20 2 The Inclin wind turbines are designed to work in parallel with solar installations. Manufactured under strict quality control system, Inclin wind turbines are tough, designed and built based on 30 years of experience. The most common applications are: telecommunication repeaters and booster stations, lighting, water pumping, buoy lighting and electricity generation for small houses, industrial buildings, and farms.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
62
Windeco Tecnologia Eolica (OBEKI GROUP) (Spain) c/Baratzondo, nº 3 Polígono Industrial Apatta-Erreka 20400 IBARRA (GIPUZKOA, SPAIN) www.windeco.es www.obeki.com Tel: + 34 943679900 Fax: + 34 943 679901 E-mail: comercial@windeco.es 5 years in business Contact Windeco for distribution methods
VENTO 5000
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price
www.folkecenter.net
Upwind 5000 11000 After regulator: 48VDC (Off grid) 250VDC (On grid) PMG Stand Alone, Grid Connection, Direct Heating, Pumping Electric Regulator; Torque demand control Yes Plastic 3 5.2 21.24 8.5 2.5 18 Lattice 15 30 2 120 5 Contact Windeco for specific price information
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
63
- Catalogue of Small Wind Turbines - 2009 -
Zytech Aerodyne (Spain / USA / China) Manufacturing Plant C Zone Of High Technology Park Jiaozhou.Qingdao. China 266300 www.zytechaerodyne.com www.revolutioninthewind.com Tel: +86-532-86623611 (China) +34-976-141819 (Spain) Fax: +86-532-86623633 (China) +34-976-141818 (Spain) E-mail: info@zytechaerodyne.com Contact: Wolfgang (Marketing Manager) wolfgang@zytechaerodyne.com Established in 1992 Domestic and international distribution Turbines also available direct from factory
Longbow
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (VDC) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price
www.folkecenter.net
Lakota
LONGBOW
Upwind 900 1000 1500 1800 12, 24, 48 3 Phase AC Brushless Permanent Magnet Stand Alone, Grid Connection, Pumping Lakota LDR Commander Controller Upward furling design, does not hide from the wind Aerospace grade, uni-directional carbon fiber blades with optional helicopter tail rotor leading-edge protective tape for use in abrasive desert environments. 3 2.1 2.3 3.46 4.15 12.5 8 3 3 >33 18 21.3 Guyed tilt-up 7.3 / 14.6 / 22 20 Extended warranty up to 5 years available 2000 17 years Since 1992 Lakota package prices vary according to dealer. Locate your nearest dealer
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
64
Hannevind Vindkraft AB (Sweden) Köpingevägen 111 SE-291 91 Kristianstad http://hannevind.com Tel: +46 (0) 44-22 85 23 E-mail: info@hannevind.com Contact: Sven-Åke Hannevind 8 years in business Wind turbines are available direct from factory
Hannevind 11 kW
Model Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Years on the market Additional Info
2,2 kW 1000 2000
5,5 kW 11 kW 15 kW 22 kW 5500 11 000 15 000 22 000 6000 12 000 18 000 25 000 see below 110V 3 phase 60Hz / 400V 3 phase 50 Hz Asynchronous Stand Alone and Grid Connection PLC Stall and brakes Fiberglass 3 3.5 6 10 11 14 9.5 28.3 78.5 95 153
30 kW 30 000 35 000
45 kW 45 000 48 000
14 154
16 200
10 to 12 9 to 10 3 to 5 2 to 4 21 to 25 80 250 550 600 700 900 1600 Lattice and guyed tubular steel towers available 12 to 33, contact Hannevind for other options 20+ 3 years, up to 10 8 Output voltage for the Hannevind 2,2 kW model is; 110V 1/3 phase 60Hz, or 400V 1/3 phase 50 Hz. All Hannevind wind power turbines have three completely independent safety systems. The safety systems protect the wind turbine against breakdown in excessively high winds or when the rotor is out of balance due to e.g. ice on the blades. Automatic stalling of the rotor at wind speeds above 18 - 20 m/s. Wind turbines connected to the utility network shut down immediately when there is power outage to prevent voltage from being sent out over the network.
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
65
- Catalogue of Small Wind Turbines - 2009 -
Liten Vindkraft AB (Sweden) ร straby 9400 SE-24297 Hรถrby www.litenvindkraft.se Tel: +46 415-40014 E-mail: info@litenvindkraft.se Contact: Johan Ohlin
6kW
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price Additional Info
www.folkecenter.net
6kW
12kW
25kW
50kW
Upwind 5000 10 000 20 000 6000 12 000 25 000 Same as the power grid for all on grid systems Permanent magnet alternator Stand Alone, Grid Connection, Direct Heating Auto programmed control Reinforced fibre glass 3 6.5 8 alt 9 12 33.17 50.24 alt 63.59 113
50 000 65 000
18 255
10 3 16 45 325 392 960 Freestanding 12 12 alt 18 18 18 alt 24 20 24 month limited warranty 10 10 10 10 Request quotation for prices Grid connected power inverter is provided by ABB Power Systems.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
66
PitchWind Systems AB (Sweden) Box 89 SE-443 22 Lerum www.pitchwind.se Tel: +46 (0)302 51910 Fax: +46 (0)302 51911 E-mail: info@pitchwind.se 8 years in business Domestic and international distribution Wind turbines also available direct from factory
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price Additional info
www.folkecenter.net
P14-30 Upwind 30 000 30 000 3 x 400 VAC PMG Stand Alone, Grid Connection, Direct Heating, Pumping Frequency converter Passive pitch by feathering Steel, fiber glass and polyester 2 14 154 12 2 None, passive pitch by feathering None, passive pitch by feathering 72 2100 Lattice, steel, concrete (15-) 35 (-62) 20 1 31 11 On request Rotor aerodynamically damped by flapping hub Power and speed regulation by patented passive pitch control Wind Diesel Hybrid power system for stand alone application Desalination applications also available
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
67
- Catalogue of Small Wind Turbines - 2009 -
SVIAB (Sweden) Svensk Vindkraft Industri AB Swedish Wind Energy Industry Co Vettershaga SE-76010 Bergshamra www.sviab.com Tel: +46 176 26 42 24 Fax: +46 176 26 42 14 E-mail: sviab@swipnet.se Sviab has worked with development, production and marketing of small wind turbines since 1978. The VK240 is available internationally
Installation in Inner Mongolia, electricity supply for several houses since 1994.
VK240
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Warranty Years on the market Additional Info
www.folkecenter.net
Upwind 750 750 12 or 24 DC 3 phase, 6 pole, synchronous PMG Stand Alone Battery charge regulator Side furling (side mounted) Polyurethane 3 2.4 4.52 11 to 12 2 to 3 none 10 to 20 3 years, if tower used meets SVIAB's specifications. 30 This wind turbine has originally been developed for summer cottages in the Swedish archipelago. On remote islands, where no other source of electricity is available, this device is a cost effective alternative compared to grid connection. The same situation applies to mountainous regions and other remote areas. VK240 has also been used to supply energy for light-houses, radio relay stations, water supply projects and similar applications around the world.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
68
Windon AB (Sweden) www.windon.se Tel: +46 (0)144301110 E-mail: info@windon.se 3 years in business Domestic and international distribution Turbines also available direct from factory
10kW
Model Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (SEK)
www.folkecenter.net
12 500 13 300 240V, 3 phase Custom Grid Connection Custom PLC Yes Fibreglass 3 8 50.24 10 2 18 1000 Stand alone monopole, different towers available. 12-16 20 2-10 10 2 210 500 kr, all included but tower.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
69
- Catalogue of Small Wind Turbines - 2009 -
Aventa Ltd. (Switzerland) Zur Kesselschmiede 29 CH-8400 Winterthur www.aventa.ch Tel: +41 (0) 52 204 00 04 Fax: +41 (0) 52 204 00 09 E-mail: info@aventa.ch Contact: Ueli Spalinger Wind turbines are available domestic and direct from factory
AV-7
Model Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (EUR) Additional Info
www.folkecenter.net
6500 7000 3 x 400 AC Permanently excited synchronous generator Grid Connection CPS Pitch control GFK 3 12.9 129
6 2 14 42 Nacelle: 700, Rotor: 470 Tubular self supporting 18 or 24 20 2 17 4 Contact Aventa Ltd. for current price information "Thanks to systematic specification and design, Aventa LoWind Turbines exploit light winds with up to four times better efficiency than conventional installations with a comparable procurement cost. Aventa LoWind Turbines have been optimised for sites with average annual wind speeds of up to 4.5 metres per second (m/s). Stronger winds are rare at landlocked sites."
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
70
WindElectric Company LTD (Ukraine) 02132, Kyiv-132, Sadovaya street 53A, House #126 www.windelectric.kiev.ua Tel: +38-044-467-77-88 Fax: +38-044-467-77-89 E-mail: info@windelectric.kiev.ua Contact: Irina Mironchuk, Denys Silin
WE1500
10 years in business Domestic and international distribution also available direct from factory
WE8000
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (USD)
www.folkecenter.net
WE3000
WE 1500
WE3000
WE8000
Upwind 1500 3000 8000 2850 5100 13600 0-285 3 phases Stand Alone, Grid Connection MPPT with microcontroller management, with big LCD display and GSM modem Electrodynamic; Aerodynamic (for WE1500, WE 3000) ; Electrodynamic; Aerodynamic and Brake stop protection (for WE 8000) Aluminium 3 3.4 4.8 6.8 9.07 18.08 36.3 10 2 25 50 54 Mast-Farm 9 to 18 15 to 20 5 270 4 $1490
-
154
250
9 to 18
12 to 21
110 4 $2990
50 3 $7990
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
71
- Catalogue of Small Wind Turbines - 2009 -
Ampair (United Kingdom) Park Farm, West End Lane, Warfield Berkshire RG42 5RH www.ampair.com Tel: +44 (0)1344 303 313 Fax: +44 (0)1344 303 312 E-mail: sales@ampair.com Contact: David Sharman
Ampair 100 x 0.9, in Antarctica
35+ years in business Worldwide distribution, Turbines are also available direct from factory
Ampair 6000 x 5.5, in UK
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection
Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price (GBP) Additional Info
www.folkecenter.net
100 x 0.9
300 x 1.2
Upwind HAWT 100 300 100 300 12, 24, 48 DC Permanent Magnet Stand Alone, Direct Heating, Pumping
600 x 1.7
6000 x 5.5
600 1100 24, 48DC / 230AC
Downwind HAWT 6000 6000 48 DC / 230 AC
Stand Alone, Grid Connection, Direct Heating, Pumping Electronic brake Pitch control, dump load, and electronic brake (and/or dump load)
Self-inductance of the heavy duty windings Continuous glass + polypropylene 6 3 0.93 1.2 0.68 1.13
1.7 2.27
5.5 23.74
15 11 3 3 2.5 3 60+ 50+ 50+ 12.5 10.5 16 190 Various options available Various options including, 2.5 to 10 Various, 10 - 30 20 2 10 000+ 100+ 100+ 1+ 25+ 3 2 1 £550 £1 100 £1 500 £13 500 All models are Class 1 per IEC 61400-2. They are designed to survive the severe marine environment, plus cold & hot weather with very heavy duty, all-weather generators, sealed against corrosion and ice. The Ampair 6000 and Ampair 600 are intended primarily for land and marine coastal use. The Ampair 100 and the Ampair 300 are designed for permanent installation on yachts as a fit and forget unit, and all models have many other applications such as weekend chalets, radio repeaters, navigation equipment or anywhere that requires 12, 24, 48V battery charging. The Ampair 6000 and Ampair 600 can be connected to the normal 220/240V electricity grids. The Ampair 6000 is large enough to power many substantial houses or farms in rural settings, or public buildings such as schools or doctors offices. The "Aquair" towed turbine generator for yachts is also available from Ampair.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
72
Eclectic Energy Limited (United Kingdom) Edwinstowe House, High Street, Edwinstowe Nottinghamshire NG21 9PR www.eclectic-energy.com Tel: +44 (0)1623 827829 Fax: +44 (0)1623 821540 E-mail: sales@eclectic-energy.com Contact: Peter Anderson 9 years in business Domestic and international distribution Turbines also available direct from factory
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Head Weight (kg) Tower Type Warranty (years) Units sold Years on the market Price (GBP) (incl. VAT)
Additional Info
www.folkecenter.net
D-400 Upwind 400 >600 12, 24, 48 3 phase, direct drive, PMA Sand Alone Independent Stall regulation Glass-filled nylon 5 1.1 0.95
StealthGen 400 >600 150 DC Stand Alone and Grid Connections
16.5 2.6 none 17.2 50 - 75mm O/D tubing 2 1000 4 £ 1 044.00
50 1 £ 1 044.00 £ 2 273.60 - Grid linked system including: turbine, wall mount bracket and G83 grid tied inverter The D-400 is specifically designed for installation in a variety of off-grid applications, including remote telecommunications, marine and agriculture. The StealthGen is a higher voltage variant of the D400, supplied in black with translucent blades for mounting on buildings, including houses The StealthGen system can be grid linked to supplement mains power.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
73
- Catalogue of Small Wind Turbines - 2009 -
FuturEnergy Ltd (United Kingdom) A Subsidiary of Special EFX Ltd 7 Ettington Park Business Centre Stratford upon Avon Warwickshire CV37 8BT www.futurenergy.co.uk Tel: +44 (0) 1789 451235 E-mail: info@futurenergy.co.uk
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Survival Head Weight (kg) Tower Type Price (GBP) Additional Info
www.folkecenter.net
FuturEnergy 1KW Upwind Turbine Upwind 1000 (600W / 12V version) 12, 24, 48 DC 3 phase PMG Stand Alone, Grid Connection, Direct Heating Mechanically furling tail fin Glass filled nylon 5 1.8 2.54 12.5 3.2 50 22 Tilt-down guyed pole ÂŁ761.70 + VAT + Carriage "The Upwind Turbine range is based on 2 years of real-life testing and development in Warwickshire and the Uplands of Scotland. Available in 12V, 24V, & 48V DC versions, they are suitable for battery charging, water/air heating and Grid-Tie installations. These turbines are tower-top ready, and will fit on to a standard 50mm galvanised scaffold tower."
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
74
Gazelle Wind Turbines Ltd. (United Kingdom) Stargate Industrial Estate Ryton Tyne & Wear NE40 3EX www.mkw.co.uk Tel: +44 (0) 191 413 0000 Fax: +44 (0) 191 413 0047 E-mail: gazelle@mkw.co.uk Contact: Ken Chaplin Founded in 1998 Turbines available direct from factory
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (GBP)
www.folkecenter.net
Gazelle 20kW Downwind 20 000 20 000 400 3-phase 50 Hz 22Kw Rated Asynchronous Grid Connection PLC Stall regulation Carbon fibre epoxy 3 11 95 13 4 20 1760 Tubular steel 13 (14 & 20 option) 20-25 1 24 10 ÂŁ72 000 Price includes: design, manufacture, installation and commissioning, UK mainland only. Excludes: foundations and cable back to disrtribution board from turbine.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
75
- Catalogue of Small Wind Turbines - 2009 -
Iskra Wind Turbines (United Kingdom) Unit 6 Weldon Road Derby Road Industrial Estate Loughborough LE11 3RN www.iskrawind.com Tel: +44 (0)1509 225900 Fax: +44 (0)1509 225901 E-mail: enq@iskrawind.com 9 years in business Domestic and international distribution
AT5-1
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price (EUR) Additional Info
www.folkecenter.net
Upwind 5000 5000 Grid Connect Permanent Magnet Stand Alone, Grid Connection Passive Pitch Control GRP composite 3 5.4 23 3 None No 60 300 Guyed or Free Standing 9, 12 or 15 20 2 >300 6 Contact Iskra Wind The blades are specifically optimised for low wind speed operation. An exceptionally efficient profile for the blade aerofoil has been adopted and the blades are longer than is usual on a machine of this rating. Accurate manufacture is essential to reproduce the required blade shape and keep drag low. Also, the passive pitch control allows the blades to be at the optimum angle for low wind speed, pitching the blades to prevent overload in high winds or at high rotor speeds.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
76
LVM Ltd. (United Kingdom) www.lvm-ltd.com Domestic and international distribution Formed in 1973 LVM specializes in products for use with low voltage DC power supplies such as in-line pumps, solar panels and wind generators.
AERO2GEN
AERO4GEN
AERO6GEN
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Furling Head Weight (kg) Tower Type Warranty (years) Additional Info
www.folkecenter.net
AERO2GEN
AERO4GEN
AERO6GEN
Upwind 48 120 48 120 12 or 24 DC 3 phase PMG Stand Alone Side furling, hinged tail vain 5 6 0.58 0.87 0.26 0.59
240 240
1.22 1.17
20.5 20.5 5 8.5 12.5 Guyed steel tube, other options are available, see website for details 1 Light, compact wind Mid-sized wind generator for cruising yachts gen., ideal for small yachts and weekenders
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
77
- Catalogue of Small Wind Turbines - 2009 -
Marlec Engineering Co Ltd (United Kingdom) Rutland 504
Rutland House Trevithick Rd Corby Northants NN17 5XY www.marlec.co.uk Tel: +44 (0) 1536 201588 Fax: +44 (0) 1536 400211 E-mail: sales@marlec.co.uk
Rutland 913
30 years in business
Rutland FM 910-3
Rutland FM 1803
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Furling Head Weight (kg) Tower Type Tower Height (m)
www.folkecenter.net
Rutland 504 Upwind 25 60 12 DC PMG Stand Alone RWS60
Rutland 913
Rutland FM 910-3
Rutland FM 1803
90 250 12 or 24 DC
90
340 750
RWS200
MPC1 Side-furling
6 (w/ diffuser ring) 0.51 0.20
6
Glass fiber 3
0.91 0.65
1.8 2.54
10 2.5
15 38.5 Pole mounting for on land or boat
-
Guyed pole >6
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
78
quietrevolution ltd (United Kingdom) 1.12, Clerkenwell Workshops, 31 Clerkenwell Close, London, EC1R 0AU www.quietrevolution.co.uk Tel: +44 20 7014 3399 Fax: +44 20 7014 3388 E-mail: info@quietrevolution.co.uk
Model Rated Output (W) Peak Output (W) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Rotor Height (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Head Weight (kg) Tower Type and Height (m) Product Life (years) Warranty (years) Price (GBP) Additional Info
www.folkecenter.net
qr5 4200 7400 Direct-drive permanent magnet synchronous generator integrated into the base of the rotor Grid Connection Peak power tracking constantly optimises turbine output for all sites and windspeeds Overspeed braking above 14m/s wind speed, auto shutdown in high wind speeds (above 16m/s) Carbon fibre and epoxy resin blades and connection arms 3 3.1 5 15.5 11 4.5 16 450 Turbines are mounted on 6m tilt down masts (shorter 3.4m alternative available for sites with space restrictions), or ground mounted on 15m tilt down mast 25 years (annual inspections recommended) Two years on components Cost of turbine: ÂŁ25 000 The aerodynamic helical blade design results in very smooth, quiet operation. Due to the vertical axis geometry of the rotor, the blade tips are close to the axis of rotation and travel a shorter distance per revolution. This results in a lower blade tip speed further reducing noise levels.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
79
- Catalogue of Small Wind Turbines - 2009 -
Samrey Ltd. (United Kingdom) Princes End Dawley Bank Telford Shropshire TF4 2JN www.samrey.co.uk Tel: +44 (0) 7919 891388 Email: info@samrey.co.uk Turbines are available internationaly through approved dealers
Wren
Merlin
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Furling Head Weight (kg) Tower Type Tower Height (m) Warranty (years) Price Additional Info
www.folkecenter.net
Wren Upwind 85 300 12 or 24 DC
Mistral
Mistral
Merlin
300 1150 120 AC (nominal), 24 or 48 DC
1100 230 AC (nominal), 24 or 48 DC
Axial flux PMG Stand Alone, Grid Connection Side furling FRP 3 1 2 0.78 3.14
3.5 9.62
8 3 20 5.5 20 Guyed or roof mount Guyed or free standing Guyed tower: up to 7.5 10 2 See website for more details Based upon the standard Wren Micro-turbine, the Wren Extreme offers upgraded components to endure the harshest marine and industrial applications.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
80
Abundant Renewable Energy (USA) 22700 NE Mountain Top Road Newberg, OR 97132 www.abundantre.com Tel: +1 (503) 538-8298 E-mail: Info@AbundantRE.com Contact: Greg Price
ARE110
8 years in business International distribution, Domestic distribution and manufacturing Wind turbines are also available direct from factory
ARE442
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (USD) Additional Info
www.folkecenter.net
ARE110
ARE442
Upwind 2 500 10 000 2 500 10 000 Grid-connect (240VAC to grid) Grid connect 24 and 48v battery charging Neodymium PMG 3 phase Stand Alone, Grid Connection (with Windy Boy Inverter) ARE VC 110 Voltage Clamp ARE 442 Voltage Clamp Side furling with gravity return Molded fiberglass 3 3.6 7.2 10.17 40.69 11 2.5 N/A 11 45 143 727 Free-standing lattice, guyed lattice, Guyed tilt-up, free-standing lattice, guyed lattice, or monopole or monopole 13 to 49 25 5 28 27 3+ 3+ Grid-connect system: $12 650 Grid-connect system: $39 600 ARE provides many other technologies and services in the field of renewable energy.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
81
- Catalogue of Small Wind Turbines - 2009 -
Aerostar, Inc. (USA) PO Box 52 Westport Point MA 02791 www.aerostarwind.com Tel: +1 508-636-5200 Fax: +1 508-636-3192 E-mail: sales@aerostarwind.com Contact: Jason Barry Over 25 years in business Domestic and international distribution Turbines also available direct from factory
Aerostar 6 Meter
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Years on the market Price (USD)
www.folkecenter.net
6 Meter Downwind 10 000 10 000 240 single phase VAC Induction Grid Connection Microprocessor Blade Tip Brakes, Mechanical Brake Fiberglass 2 6.7 35.3
11 Meter 30 000 30 000 240 / 480 single or 3 phase VAC
11.6 105
13.8 13 3.6 3.55 25 55 317.5 816.5 Freestanding or guyed Tilting 24 to 42 25 2 extendable to 5 25 $24 900 $49 900 Price includes; Turbine, control system, data collection
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
82
Bergey Windpower Co. (USA) 2200 Industrial Blvd. Norman, OK 73069 www.bergey.com Tel: +1-405-364-4212 Fax: +1-405-364-2078 E-mal: sales@bergey.com Contact: Steve Wilke 30 years in business Domestic and international Factory direct if no distributor is available
BWC XL. 1
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Dimensions (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price (USD) Additional Info
www.folkecenter.net
BWC Excel
BWC XL.1
BWC Excel-R
BWC Excel-S
Upwind 1000 7500 1500 10 000 24 DC 48, 120, 240 DC Direct Permanent Magnet Stand Alone, Grid Connection and Pumping all uses require batteries Charge regulator Furling Fiberglass 3 2.5 6.9 4.9 37.5 12 3 none 13 54 34 Guyed Tilt 18, 24, 30 30 5 > 2 000 7
10 000 12 000 220-240 AC Grid Connection, no batteries required Sync. Inverter
12 3.6
13.5
15 480 Many Choices 18-43 30-50
> 500 > 500 25 25 Prices include regulators and inverters $2 790 $23 500 $29 500 The BWC Excel-R is the same wind turbine as 10 kW, but optimized for low wind speed performance as a battery charging system.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
83
- Catalogue of Small Wind Turbines - 2009 -
DragonflyPower (USA) www.dragonflypower.com
E-mail: info@dragonflypower.com Contact: Bill Cornelius 29 years in business Distributes directly from website
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Furling Survival Head Weight (kg) Tower Type Product Life Warranty Units sold Years on the market Price (USD) Plans Blade balance kit Kit blade set Finished blade set Individual blades Additional Info
www.folkecenter.net
Dragonfly Upwind Depends on selected drive configuration and generator/alternator, around 140 - 180 w @ 6.5 m/s Depends on selected generator/alternator size; 500 - 800 Any Almost any alternator or generator Stand Alone Horizontal furling - looks like a dragonfly Wood and stainless steel 3 2.74 5.6 6.5 4.5 with standard automotive electronics, less with user tailored components Constant >36 23 User supplied masthead, height is site dependent Depends on maintenance; locally available repair parts No warranty on other peoples construction >500 plans have been sold, 65 machines before 1985 28 $10.00 available by e-mail as HTML format or through post on CD $15.00 $100.00 rough cut blades - not finished $200.00 all blades unbalanced and unpainted 1/3 blade kit or finished set Dragonfly Power does not manufacture complete turbines. For sale are concise plans and blades, either rough cut or finished. The plans include; directions for construction, wiring, trouble-shooting, towers, battery maintenance, site selection, some sources of inexpensive materials, and instructions for blade making and balancing.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
84
Entegrity Wind Systems, Inc. (USA) 4855 Riverbend Road Boulder, CO 80301 www.entegritywind.com Tel: +1 303-440-8799 Fax: +1 303-577-9775 E-mail: info@entegritywind.com Contact: Sephra Albert 7 years in business Domestic and international distribution
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Tower Type Tower Height (m) Product Life (years) Warranty (years) Years on the market Additional Info
www.folkecenter.net
EW50 Downwind 50 000 66 000 3 phase @50/60 Hz Induction Grid Connection Epoxy/glass fiber 3 phase @50/60 Hz 15 177 11.3 4.0 25 Free-standing monopole or galvanized lattice 30 or 37 30-year design life 5-year available warranty and O&M agreement 16 The EW50 is engineered and manufactured for a 30-year design life. Entegrity's comprehensive warranty, operations and maintenance program ensure that each EW50 unit is ready to work when the wind blows. Entegrity's 24/7 control and monitoring software, combined with our staff of technicians and regional partners, ensure the entire EW50 fleet receives full attention, and each unit meets or exceeds performance expectations.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
85
- Catalogue of Small Wind Turbines - 2009 -
Forcefield (USA) 2606 West Vine Fort Collins, CO 80521 www.otherpower.com Tel: +1 877-944-6247 (toll-free in USA) or +1 970-484-7257 E-mail: info74@otherpower.com Contact: Dan Bartmann 11 years in business
Domestic and international distribution Turbines also available direct from factory
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units Sold Years on the market Price (USD) Additional Info
10 foot axial flux wind turbine kit Upwind 800 1500 12, 24, or 48 Axial flux 3-phase permanent magnet alternator Stand Alone, Grid Connection coming soon Diversion load, not included Furling tail Western red cedar 3 3.05 7.30 11.18 3.13 none 11.18 38 37 Customer supplied Customer supplied 20 2 year limited 165 6 $1 750 Complete wind turbine kit includes a welded frame and tail, completely assembled alternator, all hardware, and a set of blades. All you have to do is mount the blades on the turbine, and mount the entire machine on your tower. User's manual available free online: www.otherpower.com/users_manual.shtml These turbines are heavy, slow-spinning, quiet and reliable. Controller, diversion loads, and tower not included. Individual parts and plans available for customers who wish to build their own machine. Forcefield also offers a smaller 7' (2.13m) diameter turbine.
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
86
HelixWind (USA) 1848 Commercial Street San Diego, CA 92113 www.helixwind.com Tel: Toll Free: +1 877 246 4354 Int: +1 619 501 3932 Fax: +1 619 330 2628 E-mail: ian@helixwind.com 3 years in business Domestic and international distribution also available direct from factory
S322
Model Orientation Rated Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Dimensions (m) 2 Swept Area (m ) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Years on the market Price Additional Info
www.folkecenter.net
S594
S322
S594
Vertical axis helical Savonius rotor 2500 5000 110VAC - 240VAC, 50-60Hz Grid Tied Inverter PMG Stand Alone, Grid Connection, Pumping, Direct Heating (dump load can be a water heater) Integrated inverter MPPT No braking needed for normal operation. Manual override for maintenance. Ultra tough Aluminum Alloy 13 24 1.21 W x 2.65 H 1.21 W x 4.87 H 3.19 5.88 15 3.6 approx 27 n/a 52 135 635 Monopole 4.5 to 6, depending on obstructions 30 5 year Limited Warranty. Extended warranties available. 2 Contact HelixWind for current price information Helix Wind energy systems are designed, engineered and tested at corporate facilities in San Diego and California. Each component is individually tested to ensure the system performs seamlessly as a whole. Performance data is from real installed working turbines.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
87
- Catalogue of Small Wind Turbines - 2009 -
Selsam Innovations (USA) 2600 Porter Ave. Unit B Fullerton, CA 92833
www.selsam.com Tel: +1 714 992 5594 E-mail: Doug@Selsam.com Contact: Doug Selsam 10 years in business Available direct from factory; www.superturbine.net www.dualrotor.com www.cheapwindturbines.com
Model Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Rotor Spacing (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Price (USD)
Additional Info
ST 2.0 California SuperTwin 2000 2000 Low Voltage Stator; 12 or 24 / 48 DC, Volt Stator; 24 or 48 DC higher voltages available please ask 3 phase PMA Stand Alone and Grid Connection Morningstar Tristar TS-60, 60 amp controller for 24 or 48 V Side-furling using inclined tail pivot Carbonfiber/epoxy - real laid-up composite blades, not injection-molded plastic 2 per rotor, 2 rotors 3 (per one rotor) 3.8 7.3 (per one rotor) 13 (both rotors minus overlap)
13 3.5 none 13 36 43 Owner's choice Owner's choice, dual rotor offers good performance at lower tower height unknown 2 year standard - 5 year warranty available $2 600; 10-feet (3m) diameter, $3 000; 12-feet (3.6m) diameter (low wind speed version) Contact Selsam Innovations for further details "Turbines based on research conducted for the California Energy Commission. Class 5 performance in a class 3 wind resource. The extra rotor yields performance enhancement equivalent to tripling tower height." Selsam also manufactures a SuperTwin with 3.6m rotor and 18m2 swept area for optimal performance in low wind speed areas.
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
88
Southwest Windpower (USA) 1801 W. Route 66 Flagstaff, AZ 86001 www.windenergy.com Tel: +1 928 779 9463 E-mail: info@windenergy.com International distribution, see website to find a dealer in your area
Whisper 500
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Survival Head Weight (kg) Tower Type Tower Height (m) Warranty (years) Additional Info
Air-X Upwind 400 12, 24, and 48 VDC
Whisper 100, 200, 500
Skystream 3.7
900, 1000, 3000 900, 1000, 3200 12, 24, 36, 48 VDC (High Voltage available)
Downwind 2400 2600 240 VAC (Optional 208 VAC)
Whisper controller Side-furling
Stand Alone, Grid Connection Universal inverter Stall regulation control
3, 3, 2 2.1, 2.7, 4.5 3.46, 5.72, 15.9
3 3.72 10.87
PMG Stand Alone Microprocessor-based Electronic torque control Carbon fiber composite 3 1.15 1.04
12.5 12.5, 11.6, 10.5 13 3.5 49.2 55 63 5.85 21, 30, 70 77 Schedule 40 pipe, various diam. Tubular free standing Site dependent 3 year limited Five year limited The Air is available in many different variations: Air-X, Air Industrial, Air-X Marine, and Air Breeze(200W). Exclusive to the Whisper, the side-furling Angle-Governor protects the turbine in high winds by turning the alternator and blades out of the wind, reducing turbine exposure. The Skystream comes with an optional two-way remote display that can control from up to 1000â&#x20AC;&#x2122; (300 meters) away. Performance can also be monitored and downloaded to a personal computer (via USB converter).
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
89
- Catalogue of Small Wind Turbines - 2009 -
Synergy Power Corporation (USA) 200 South Virginia Street Suite. 800 Reno, Nevada 89501 www.synergywind.com Tel: +1 (775)-562-3888 Fax: +1 (775)-833-3999 E-mail: info@synergypowercorp.net 25 years in business Domestic and international distribution
Model Orientation Rated Output (Watt) (Wh/day, Class 2) Peak Output (Wh/day, Class 4) (Wh/day, Class 6) Output Voltage (V) Generator Type Applications Controller Type Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Survival Turbine Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Price Additional Info
S-8
S-30
S-100
S-300
S-500
3000 30 000
10 000 100 000
30 000 300 000
50 000 500 000
130 000 160 000 415 / 480
390 000 480 000
650 000 800 000
Downwind 1000 8 000
10 000 39 000 12 000 48 000 24 / 48 DC 24 / 48 DC PMA Stand Alone, Grid Connection, Direct Heating, Pumping Battery Monitor Variable rotor area Fiberglass 3 3.78 6.2 11.89 30.2
Grid Connection, Direct Heating, Pumping
Grid Sync
12.33 119.2
20 314
25 490.8
Output rated per 24h at 4.5m/s (Class 2 wind zone) 3 N/A 100+ 69 210 440 860 1320 Guyed, Tubular 4'' NBDia 6'' NBDia 10'' NBDia 12" NBDia 14" NBDia 24.4 36.5 20+ 5 Check with dealer All Synergy Turbines are rated by total KWH/day delivered in Class 2 winds. The Synergy wind turbine is differentiated from all other wind turbines on the market by its technologically unique, patented ability to vary rotor area on a pivotal tilting axis according to wind speed. Synergy turbines operate in Class 2 (average 9.8 mph or 4.5 m/s) winds and have the ability to pivot and adjust in real time wind conditions and generate electricity even in higher wind regimes. The turbine incorporates a large rotor area for low winds, allowing for production of energy when conventional fixed axis wind turbines produce little or none. Similarly, as speeds increase, the turbine axis changes to reduce the rotor area which in turn allows for safe operation and continued power generation as wind speeds increase.
www.folkecenter.net
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
- Catalogue of Small Wind Turbines - 2009 -
90
VENTERA Energy Corporation (USA) 6100 Waseca Street Duluth, MN 55807 www.venteraenergy.com Tel: +1 218-624-4040 E-mail: info@VenteraEnergy.com Contact: Manny Umpierre 5 years in business Domestic distribution, Turbines also available direct from factory Raising the hinged at base, self-supporting tower
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Overspeed Protection Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (USD)
Additional Info
www.folkecenter.net
VT10 Downwind 10 000 11 500 220 Volts AC Permanent Magnet Alternator Grid Connection, Direct Heating and Pumping Blade Furling (outer half) Glass fiber engineered plastic 3 6.7 35 13 2.7 No Cut Out 13 55 227 3-legged, self-supporting, fold-over (hinged at base), tapered leg, lattice with Ventera top adapter 11, 14, 18, 21, 25 30 5 35 1 Wind Turbine: $12 800 CSA Certified Hybrid Inverter: $8 400 UL Certfied Inverter: $13 000 Towers: from $10 200 to $25 400 Ventera Energy Inc. is the maker of the VT10, a 10kW, Grid Tied Wind Turbine manufactured in Duluth, MN. The VT10 can produce between 1000 to 2000 kWhours per month with a good wind resource and can be combined with solar in a 12kW Hybrid system using a dual peak power tracking Synchronous Inverter. The direct drive design drastically reduces preventative maintenance by using few moving parts, with sealed bearings throughout and no gearbox to lubricate. Preventative maintenance on the VT10 is required only once every 3 to 5 years.
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00
91
- Catalogue of Small Wind Turbines - 2009 -
Wind Turbine Industries Corp. (USA) 16801 Industrial Circle SE Prior Lake, MN. 55306 www.windturbine.net Tel: +1 (952) 447-6064 Fax: +1 (952) 447-6050 E-mail: wtic@windturbine.net 26 years in business Systems available through Dealer Network
Model Orientation Rated Output (W) Peak Output (W) Output Voltage (V) Generator Type Applications Controller Type Blade Material # of Blades Rotor Diameter (m) Swept Area (m2) Windspeed (m/s) Rated Cut-in Cut-out Furling Survival Head Weight (kg) Tower Type Tower Height (m) Product Life (years) Warranty (years) Units sold Years on the market Price (USD)
www.folkecenter.net
Jacobs 31-20 Upwind 20 000 25 000 240 Synchronous Brushless 3 phase with outboard exciter Grid Connection Inverter UL 1741 Fiberglass 3 9 70
11.6 3.35 none The blades will furl at 11.6 m/s and the system will begin to side furl at 18 m/s. 53 907 Lattice and monopole 26 - 43 25 1-5 1400 30 $ 50 000 - 65 000 Price includes; generator, blades, tower and inverter
-
Nordic Folkecenter for Renewable Energy
-
Tel: +45 97 95 66 00