GMC World Wide Services Photo: Haakon Nordvik
GMC World Wide Services in Haugesund cooperates closely with the remaining GMC Group for multi-discipline modification commissions, ad hoc tasks, fire protection, HVAC, and duties within hydraulics, mechanical, steel and diesel. GMC World Wide Services develops solutions with retro-fit of existing systems, and provides top competence on control systems, communication systems, generators and electric motors.
We’re here:
Photo: Haakon Nordvik
GMC World Wide Services is certified as a competent and pro-active partner for our customers. The department comprises among others eight technicians certified by Deif as well as certified personnel for testing and commissioning of ballast water systems from OptiMarin. The personnel consist of experienced ship electricians having worked on tankers, bulk ships, container ships, diving vessels, supply vessels and passenger ships.
59°26′47″N 5°17′54″E Haugesund, Norway
Specially equipped technicians from GMC offer emergency response to ships and rigs all over the world. Our specialists work on vessels in harbour on in transit. Advanced technical equipment, tools and spare parts make customers avoid expensive shipments and time delays. – We have never rejected a customer request, and we have solved every task.
Photo: Haakon Nordvik
Some of our typical voyages 58°57′48″N 5°43′8″E Stavanger, Norway
34°53′1″S 56°10′55″W Montevideo, Uruguay
Retro-fit of fire detection system onboard passenger vessel.
Repair of auto pilot onboard seismic vessel.
41°9′43.71″N 8°37′19.03″W Porto, Portugal
31°15′N 32°17′E Port Said, Egypt
Repair of generator protection devices onboard crude oil tanker.
Replacement of generator breaker onboard Ro-Ro vessel.
51°13′N 04°24′E Antwerp, Belgium
22°15′19″N 97°52′07″W Tampico, Mexico
Retro-fit of fire detection system onboard container vessel.
Refurbishing of main switch board onboard gas tanker.
49°29′7″N 0°06′50″E Le Havre, France
27°56′50″N 82°27′31″W Tampa, Florida, USA
Pre-docking survey onboard crude oil tanker.
Pre-docking survey onboard bulk carrier.
52°22′23″N 4°53′32″E Amsterdam, The Netherlands
6°18′48″N 10°48′5″W Monrovia, Liberia
Upgrade of emergency systems onboard diving support vessel.
Steering gear repair onboard seismic vessel.
53°33′0″N 8°35′0″E Bremerhaven, Germany
41°01′N 28°58′E Istanbul, Turkey
Main switchboard refurbishing onboard self discharging vessel.
Discharge test of back-up systems onboard semi submersible drilling rig.
60°22′N 28°37′E Primorsk, Russia
30°04′48″N 94°07′36″W Beaumont, Texas
Repair of gantry cranes onboard shuttle tanker.
Miscelanneous repairworks onboard bulk carrier. 47°34′3″N 52°42′26″W St. John’s, Newfoundland, Canada
Discharge test of back-up systems onboard semi-submersible drilling rig.
GMC World Wide Services Visiting address Bø Øst NO- 4262 Avaldsnes Norway
The Transocean Winner continued operating during an emergency power shutdown, thanks to GMC.
Performed artificial respiration on rig after fire Thanks to the emergency response with a new high voltage switchboard from Siemens and Power Management system Delomatic 4 from Deif, the drilling rig Transocean Winner could continue its normal operation after power production was shut down due to fire. During Christmas 2009 a fire struck the high voltage switchboard on board the drilling rig Transocean Winner while operating in the North Sea. The rig assumed emergency power and drilling operations were immediately suspended. Since the accident occurred in the middle of the Christmas period the situation became more complicated, and the Transocean management in Houston entered emergency mode. Artificial respiration Project manager Kolbein Tjelle left the same day from GMC Elektro in Haugesund to the Transocean office in Stavanger. Tjelle’s solution was to give «artificial respiration» by temporary power production.
Diesel units were picked up by emergency freight from Norway and The Netherlands, transformers from Madrid, and switchboard containers from Deep Ocean. GMC Diesel and GMC Maritime assisted with the installation and operation on board the rig. Very short down time The down time for Transocean Winner was minimal due to the close follow up from GMC Elektro, who also attained DNV approval. – It was vital for Transocean to maintain rig operation, and the alternative with towing to shore would have shut down the rig for a longer period. GMC Elektro has in short done a tremendous job with the solution and installation, says Jarle Lerstøl with Transocean Norway.
Diving vessel Acergy Osprey was upgraded from DP2 to DP3, against all odds.
Delivered impossible DP3 upgrade The rebuilding of diving vessel Acergy Osprey from DP2 to DP3 was basically impossible without a separate switchboard. GMC Elektro, however, found a solution that DNV fully approved. When regulatory change required that dynamic positioning (DP) for the diving vessel be upgraded a few years ago, the shipowner faced a huge challenge with Acergy Osprey. This diving ship, which was in full operation for customers in the North Sea, was certified as DP2. It only had a single room for instrument boards, while an upgrade to DP3 required two separate rooms. – The requirement was a DP3 certification, which sets strict requirements for backup systems that are physically separated in a different room, says Kolbein Tjelle at GMC Elektro in Haugesund. Splitting the instrument panels The assignment was given to GMC Elektro, and 20 professionals were sent to start working on Acergy
Osprey. The job was described as «impossible» due to the construction of the ship, but GMC still managed to find a solution by splitting the panels. – All panels had to be rebuilt completely, with fire separation and separation of onboard power systems, Tjelle says. All panels were connected to systems for early detection of fire, and extinguishing systems were mounted within all boards. – The work took about three weeks before we could upgrade to DP3 and invite DNV to certify the changes, Tjelle says. New assignment for Osprey The successful upgrade from DP2 to DP3 made the shipowner able to take on further diving assignments with Acergy Oprey. GMC Elektro was later hired to refit the diving systems and to reterminate the ship’s umbilical - the lifeline between the boat and its diving bell. During a subsequent planned maintenance project GMC Elektro detected that a number of ship plate switches had fatigue damage from extended use and strain. – This is a typical problem that we solved by replacing old switches with new ones, says Tjelle.
24 HOUR SERVICE Tel: +47 52 82 60 00
www. .no Telephone
Postal address
Visiting address
+47 52 82 60 00
world-wide-services@gmc.no
Post office box 2149 NO-5504 Haugesund Norway
Bø Øst NO- 4262 Avaldsnes Norway