TABLE
1 of 12
andreu world international design contest 2020 : special edition sustainable design
TABLE
TECHNICAL REPORT
participant number: 20201225
TABLE
INITIAL SKETCHES The original functional inspiration for this table was to create a low desk that could fit aesthetically in various spaces within the home. Design inspiration came from Ray and Charles Eames’ desks and storage units from 1949, as well as from Japanese Chabudai. The objective was to design a low table that would satisfy two primary functions: 1. An ‘active’ function where the user can sit on the floor and use the table as a desk. 2. A ‘decorative’ function where the low table serves as a place to store and display objects.
2 of 12
TABLE
3 of 12
EXPLORING FORM Multi-level, stepped surfaces are purposeful and add visual interest. The stepped profile of the table was informed by the way people create height changes at a standard desk through the addition of monitor risers, stacked books, or containers for pens and miscellaneous items.
www.autodesk.com/revit
Consultant Address Address Address Phone
Consultant Address Address Address Phone
Consultant Address Address Address Phone
Consultant Address Address Address Phone
Consultant Address Address Address Phone
Consultant Address Address Address Phone
Consultant Address Address Address Phone
PLAN
Consultant Consultant Consultant Address Address Address Address Address Address Address Address Address Phone Phone Phone www.autodesk.co www.autodesk.com/revit www.autodesk.co www.autodesk.com/revit www.autodesk.com/revit www.autodesk.com/revit
Consultant Address Address Consultant Address Address Phone Address
Consultant Address Consultant Address Address Address Address Phone
Consultant Address Consultant Address Address Address Address Phone Address
Consultant Address Consultant Address Address Address Address Address Phone Phone
Address ConsultantAddress Consultant Consultant Consultant Address Address AddressAddress Address Address Address Address AddressAddress Address Address Address Phone AddressAddress Phone Address Phone Phone Phone Phone
Consultant Address Address Address Phone
Consultant Address Address Address Phone
Consultant Consultant Consultant Consultant Address AddressAddress Address Address AddressAddress Address Address AddressAddress Address Phone Phone Phone Phone
Consultant Address Address Address Phone
Consultant Address Address Address Phone
Consultant Consultant Consultant Consultant Address AddressAddress Address Address AddressAddress Address Address AddressAddress Address Phone Phone Phone Phone
Consultant Address Address Address Phone
Consultant Address Address Address Phone
Address Phone
PERSPECTIVE
ELEVATION
Phone
2
2
2
A101
A101
3
3D View 1
2
3D View 1
3
2
2
A101
A101
3 3D View 1
2
A101
2
A101
3
3D View 1
A101
3
3D View 1
3D View 1 3D View 1 3 3
www.autodesk.com/re www.
Consultant Address Address Address Phone
Consultant Address Address Address Phone
A101
www.autodesk.com/revit
No.
Address Phone
Description No.
Consultant Address
Consultant Address
Consultant
Consultant
ConsultantAddress Consultant Consultant Consultant Address Address Address AddressAddress Address Address Address Phone AddressAddress Phone Address Address AddressAddress Address Phone Phone Phone Phone
Description DateNo.
No. Description Date D N
Consultant Consultant Consultant Consultant Address AddressAddress Address Address AddressAddress Address Address AddressAddress Address Phone Phone Phone Phone
22
2
2
A101
A101
A101 A101
3 3D View 1
3DView View11 3D View3D 1 View 13D 3 3 33
No.
No. Description
Owner
Date No. No. Descripti No. Description No. Description Description Date Descriptio
Owner
OwnerO
Project Name Project Name Project Proje Na
UnnamedUnnamedUnname Un
TABLE 1' - 4"
4 of 12
10" 4' -x10" 58”4'x-16” 21.5” One sheet of 3/4” - 4x8 plywood
1' - 4"
PLAN scale: 1” = 1’-0”
' - 9 1/2"
FRONT ELEVATION scale: 1” = 1’-0”
1' - 9 1/2"
1' - 9 1/2"
0' - 11 3/4" 0' - 5 1/4" 0' - 4 1/2"
1' - 9 1/2"
0' - 10 1/4"
1' - 9 1/2"
0' - 11 3/4" 0' - 5 1/4"
0' - 4 1/2" 1' - 9 1/2" /4" 0' - 5 1/4"
scale: 1” = 1’-0”
0' - 8" 0' - 8"
0' - 11 3/4" 0' - 5 1/4" 0' - 4 1/2"
0' - 3 3/4"
0' - 80'3/4" - 8 3/4"
0' - 90'1/2" - 9 1/2" 0' - 1' 3 3/4" - 9 1/2"
1' - 4" 1' - 4"
1' - 4"
1' - 9 1/2"
0' - 4 1/2"
0' - 4 1/2"
2' - 8" 2' - 8"
0' - 8" 0' - 8"
LEFT ELEVATION
1' - 4"
1' - 4"
1' - 9 1/2" 1' - 9 1/2"
0' - 10 1/4"
4' - 10" 4' - 10"
0' - 11 3/4" 0' - 5 1/4"
0' - 8"
0' - 10 1/4"
RIGHT ELEVATION scale: 1” = 1’-0”
2' - 7 1/4"
1' - 4"1' - 4" 1' - 9 1/2"
0' - 8"
1' - 4 1/2" 1' - 9 1/2"
0' - 9 1/2"
4' - 10"
0' - 11 3/4" 0' - 5 1/4" 0' - 4 1/2"
0' - 10 1/4"
0' - 10 1/4"
1' - 4" 0' - 8"0' - 8"0' - 8 3/4"
1' - 9 1/2"
0' - 11 3/4" 0' - 5 1/4"
0' - 4 1/2"
2' - 8"
0' - 8"0' - 8"
0' - 11 3/4" 0' - 5 1/4" 0' - 4 1/2"
4' - 10"
0' - 10 0' 1/4" - 10 1/4"
1' - 4" 0' - 11 3/4" 0' - 5 1/4" 0' - 4 1/2"
0' - 80'3/4" - 8 3/4"
0' - 3 3/4"
1' - 4"1' - 4"
2' - 72'1/4" - 7 1/4"
0' - 90'1/2" - 9 1/2" 0' - 3 3/4"
2' - 8"2' - 8"
1' - 41'1/2" - 4 1/2"
0' - 3 3/4"
Overall dimensions: Material:
4' - 10" 4' - 10"
0' - 10 1/4"
1' - 9 1/2"
PLANS AND ELEVATIONS
TABLE
PRELIMINARY MODELS After sketching, table dimensions were outlined using tape and adjusted as needed. All faces of the table are able to fit onto one 4x8 piece of plywood, or two 4x4 pieces of plywood. Each face was organized on CAD to ensure minimal material waste. A taped chipboard model was used to understand where adjustments should be made. From the taped test model came the addition of a cap to the low container, the addition of a second piece of plywood for added support and visual balance, and a scaling back of the middle portion of the table.
5 of 12
TABLE
3D VIEWS
6 of 12
1
1
3D View 2
3D View 2
TABLE
7 of 12
FULL-SCALE JOINERY TEST
BOX-JOINT
MORTISE & TENON
Prior to constructing a 1:5 scale model, the friction held joinery was tested full-scale to ensure that no additional fasteners would be needed. The two vertical pieces of plywood must be glued together prior to construction. This is the only additional element required for assembly of the table.
TABLE
1:5 MODEL PROCESS
8 of 12
TABLE
9 of 12
COMPLIANCE WITH INTENDED FUNCTION Desk Function:
Decorative Function:
1. The longer, middle section of the table serves as a work surface for a low desk. When working on a laptop, the user can sit on the floor or a pillow and be at eye level with the screen. 2. The smaller, raised surface can be used for elevated referential documents so the users head does not need to repeatedly look up and down. 3. The lower surface where the middle section of the table overlaps can be used for less frequently referenced documents.
1. The longer, middle section can serve as a credenza allowing for more permanent organization of items. 2. Lowest section features concealable storage and a vertical cubby. The cubby is tall and wide enough for books to be stored horizontally or vertically.
TABLE
PRODUCTION COSTS FOR FULL-SCALE FABRICATION Fabrication: Total routing time was 50 minutes. The CNC machine fits a 4x4 piece of plywood. The process was split into two runs for the full plywood sheet. A ¼” drill bit ran three passes through ¾” plywood. Each face of the table was strategically organized on the plywood to minimize waste. Cost: The 4x8 piece of plywood cost $50. Wood glue for joining the double plywood support and from sandpaper will lead to small additional costs. Shipping: The table is flat-pack shipping friendly and does not need fasteners for assembly.
10 of 12
TABLE
FABRICATION OF FULL SCALE TABLE
11 of 12
TABLE
12 of 12
TABLE
TECHNICAL REPORT
participant number: 20201225