Addendum: 16 February 2009
General 01.01 Drawing Index 02.01 Sign Type Overview 03.01 Color Palette 04.01 Typography, Arrows, Symbols Sign Types 05.01 Sign Type 100, Overhead Roadway Directional 05.02 Sign Type 101, Overhead Roadway Directional 05.03 Sign Type 102, Overhead Roadway Identification 05.04 Sign Type 103, Overhead Roadway Directional 05.05 Sign Face Layout Details 05.06 Overhead Roadway Construction/Fabrication Details 05.07 Overhead Roadway Construction/Fabrication Details 05.08 Page Removed 05.09 Guard Rail Layout 05.10 Sign Type 110, Roadside Directional 05.11 Sign Type 111, Roadside Directional 05.12 Sign Type 120, Roadside Directional 05.13 Sign Type 121, Roadside Directional 05.14 Sign Type 122, Roadside Directional 05.15 Sign Type 123, Roadside Directional 05.16 Sign Type 131, Roadside Identification 05.17 Roadside Directional Construction/Fabrication Details 05.18 Roadside Directional Construction/Fabrication Details Sign Location Plans 06.01 Existing Overall Sign Location Plan 06.02 Sign Location Plan, Area A 06.03 Sign Location Plan, Area B 06.04 Sign Location Plan, Area C 06.05 Sign Location Plan, Area D 06.06 Sign Location Plan, Area E 06.07 Sign Location Plan, Area F 06.08 Proposed Overall Sign Location Plan 06.09 Sign Location Plan, Area A 06.10 Sign Location Plan, Area B 06.11 Sign Location Plan, Area C 06.12 Sign Location Plan, Area D 06.13 Sign Location Plan, Area E 06.14 Sign Location Plan, Area F Message Schedule Location Information 07.01 Sign 001 thru Sign 002 07.02 Sign 003 thru Sign 006 07.03 Sign 007 thru Sign 009 07.04 Sign 010 thru SIgn 012 07.05 Sign 013 thru Sign 015 07.06 Sign 016 thru Sign 018 07.07 Sign 019 thru Sign 021 07.08 Sign 022 thru Sign 024 07.09 Sign 025 thru SIgn 027 07.10 Sign 028 thru Sign 030 07.11 Sign 031 thru Sign 032 07.12 Sign 033
Addendum
02/16/09
PY
Sign Type ST-100
Sign Type ST-101
Sign Type ST-102
Sign Type ST-103
Overhead Roadway Directional
Overhead Roadway Directional
Overhead Roadway “Welcome to” Identification
Overhead Roadway Directional
Sign Type ST-110
Sign Type ST-111
Sign Type ST-120
Sign Type ST-121
Roadside Directional
Roadside Directional
Roadside Directional
Roadside Directional
Sign Type ST-122
Sign Type ST-123
Sign Type ST-131
Roadside Directional
Roadside Directional
Roadside Identification
Note: The sign types illustrated above are provided solely as an overview to display the family of signs. Refer to individual sign drawings in Section 05 for specifications and detailed information.
Addendum
02/16/09
PY
Blue
White
Red
Brushed Aluminum
3M Diamond Grade VIP Series 3990 #3995 Blue
3M Diamond Grade VIP Series 3990 #3990 White
3M High Intensity Reflective Sheeting Series 3930 #3932 Red
Tnemec Co., Inc. 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduralume Light Steel finish coat
Application of red to COS logo to be determined by COS board of directors.
Addendum
02/16/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations. ILLUMINATION: Illuminated
4
Typical Detail - Directional Arrow
LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing)
SCALE: 1/4” = 1’ - 0”
COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue.
13” cap. height, kerning @ 35
Arrow Field: Retroreflective, applied 3M High Intensity Reflective Sheeting Series 3930 - #3932 Red. Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
Short Term Parking Rental Car Return
Arrivals
Departures
Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White. FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242). Attach to structure in accordance with standards as established by CDOT. Arrow Field: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Paint all exposed surfaces (see Color/Decoration Details above). Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above). Overhead Tubular Structure: All including structure, sign face attachment methods, lighting assembly and foundation to meet all applicable CDOT standards.
Addendum
02/16/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations. ILLUMINATION: Illuminated
4
Typical Detail - Directional Arrow
LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing)
SCALE: 1/4” = 1’ - 0”
COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue.
14” cap. height, kerning @ 35
Arrow Field: Retroreflective, applied 3M High Intensity Reflective Sheeting Series 3930 - #3932 Red. Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
Short Term Parking Rental Car Return
Arrivals
Departures
Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White. FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242). Attach to structure in accordance with standards as established by CDOT. Arrow Field: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Paint all exposed surfaces (see Color/Decoration Details above). Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above). Overhead Tubular Structure: All including structure, sign face attachment methods, lighting assembly and foundation to meet all applicable CDOT standards.
Addendum
02/16/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client.
1’ - 3”
Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages.
2’ - 1-1/2"
F4 1’ - 6"
Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
C2 F2 GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
C4
ILLUMINATION: Illuminated
4
Typical Detail - Directional Arrow
LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing)
SCALE: 1/4” = 1’ - 0”
COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue. 5"
11'-0" 10'-2"
Arrow Field: Retroreflective, applied 3M High Intensity Reflective Sheeting Series 3930 - #3932 Red.
5"
C4 L1
C3 F3
12" 12" 12" 7" 12" 14"
Arrivals
Departures
FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242).
10'-0" 10'-9"
C3 F3
16"
F4
9"
4
Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White.
C1 F1 C2 F2
7"
Short Term Parking Rental Car Return C1 F1
Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
F4
Center Over Lane
Center Over Lane
Attach to structure in accordance with standards as established by CDOT.
Center Over Lane
Arrow Field: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Paint all exposed surfaces (see Color/Decoration Details above).
C2 F2
F4
Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above).
17’-0” min.
C4
Overhead Tubular Structure: All including structure, sign face attachment methods, lighting assembly and foundation to meet all applicable CDOT standards.
Addendum
02/16/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
4
Typical Detail - Directional Arrow
05.02 SCALE: 1/4” = 1’ - 0”
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations. ILLUMINATION: Illuminated
13” cap. height, kerning @ 35
Arrivals
LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing) COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue.
Departures
Arrow Field: Retroreflective, applied 3M High Intensity Reflective Sheeting Series 3930 - #3932 Red. Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat. Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242). Attach to structure in accordance with standards as established by CDOT. Arrow Field: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Paint all exposed surfaces (see Color/Decoration Details above). Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above). Overhead Tubular Structure: All including structure, sign face attachment methods, lighting assembly and foundation to meet all applicable CDOT standards.
Addendum
12/16/08
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
4
Typical Detail - Directional Arrow
05.02 SCALE: 1/4” = 1’ - 0”
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
14” cap. height, kerning @ 35
ILLUMINATION: Illuminated LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing)
Arrivals
COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue.
Departures
Arrow Field: Retroreflective, applied 3M High Intensity Reflective Sheeting Series 3930 - #3932 Red. Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat. Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242). Attach to structure in accordance with standards as established by CDOT. Arrow Field: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Paint all exposed surfaces (see Color/Decoration Details above). Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above). Overhead Tubular Structure: All including structure, sign face attachment methods, lighting assembly and foundation to meet all applicable CDOT standards.
Addendum
12/16/08
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant.
1’ - 3”
Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference.
2’ - 1-1/2"
F4 1’ - 6"
Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages.
C2 F2
Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
C4
4
Typical Detail - Directional Arrow
05.02 SCALE: 1/4” = 1’ - 0”
5"
11'-0" 10'-2"
ILLUMINATION: Illuminated
5"
05.02
C3 F3
C1 F1
COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue. Arrow Field: Retroreflective, applied 3M High Intensity Reflective Sheeting Series 3930 - #3932 Red.
C2 F2
Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
C3 F3
Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White
F4
16"
4
F4
LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing)
FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242).
9"
C1 F1
7"
10'-0" 10'-9"
Departures
12" 12" 12" 14"
C4 L1
Arrivals
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
Center Over Lane
Center Over Lane
C4 F4
17’-0” min.
C2 F2
Attach to structure in accordance with standards as established by CDOT. Arrow Field: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Paint all exposed surfaces (see Color/Decoration Details above). Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above). Overhead Tubular Structure: All including structure, sign face attachment methods, lighting assembly and foundation to meet all applicable CDOT standards.
Addendum
12/16/08
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
13” cap. height “Welcome to”, kerning @ 35
ILLUMINATION: Illuminated LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing)
L2 Frutiger 56 Italic (15% increased kerning, 135% increased word spacing)
COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue.
Colorado Springs Airport
Airport Logo: Surface applied 3M Reflective Film in Red. Final spec. to be provided by COS. Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat. Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White. FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242).
Attach to structure in accordance with standards as established by CDOT. Arrow Field: Not Used. Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above). Overhead Tubular Structure: All including structure, sign face attachment methods, lighting assembly and foundation to meet all applicable CDOT standards.
Addendum
02/16/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
14” cap. height “Welcome to”, kerning @ 35
ILLUMINATION: Illuminated LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing)
L2 Frutiger 56 Italic (15% increased kerning, 135% increased word spacing)
COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue.
Colorado Springs Airport
Airport Logo: Surface applied 3M Reflective Film in Red. Final spec. to be provided by COS. Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat. Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White. FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242).
Attach to structure in accordance with standards as established by CDOT. Arrow Field: Not Used. Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above). Overhead Tubular Structure: All including structure, sign face attachment methods, lighting assembly and foundation to meet all applicable CDOT standards.
Addendum
02/16/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference.
F4
Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
C4 L2
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
25'-0"
C4 L1
ILLUMINATION: Illuminated LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing)
12” 12”
F4
10'-0" 10'-9" 7"
C1 F1
Airport Logo: Surface applied 3M Reflective Film in Red. Final spec. to be provided by COS.
C3 F3
Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
F4
16"
Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White.
Center Over Roadway
FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242).
5"
25'-10"
17’-0” min.
5"
F4
COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue.
9"
C2 C3 F3
increased word spacing)
14"
Colorado Springs Airport
L2 Frutiger 56 Italic (15% increased kerning, 135%
C1 F1
Attach to structure in accordance with standards as established by CDOT. Arrow Field: Not Used. Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above). Overhead Tubular Structure: All including structure, sign face attachment methods, lighting assembly and foundation to meet all applicable CDOT standards.
Addendum
02/16/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
4
Typical Detail - Directional Arrow
05.04 SCALE: 1/4” = 1’ - 0”
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations. ILLUMINATION: Illuminated
13” cap. height, kerning @ 35
Arrivals
LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing) COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue.
Departures
Arrow Field: Retroreflective, applied 3M High Intensity Reflective Sheeting Series 3930 - #3932 Red.
Valet Parking
Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat. Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White. FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242). Attach to structure in accordance with standards as established by CDOT. Arrow Field: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Paint all exposed surfaces (see Color/Decoration Details above). Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above). Existing Support Structure: Field varify for installation and attachment methods.
Sign # 020 shown
Addendum
02/16/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
4
Typical Detail - Directional Arrow
05.04 SCALE: 1/4” = 1’ - 0”
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations. ILLUMINATION: Illuminated
14” cap. height “Welcome to”, kerning @ 35
Arrivals
LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing) COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue.
Departures
Arrow Field: Retroreflective, applied 3M High Intensity Reflective Sheeting Series 3930 - #3932 Red.
Valet Parking
Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat. Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White. FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242). Attach to structure in accordance with standards as established by CDOT. Arrow Field: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Paint all exposed surfaces (see Color/Decoration Details above). Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above). Existing Support Structure: Field varify for installation and attachment methods.
Sign # 020 shown
Addendum
02/16/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant.
1’ - 3”
Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference.
2’ - 1-1/2"
Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation.
1’ - 6"
F4
All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages.
C2 F2
Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
C4
4
Typical Detail - Directional Arrow
05.04 SCALE: 1/4” = 1’ - 0”
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations. ILLUMINATION: Illuminated
F4
5"
11'-0" 10'-2"
F4
LETTERING: Frutiger 65 Bold (15% increased kerning, 135% increased word spacing)
C1 F1
COLOR / DECORATION DETAILS: Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue.
5"
Departures Valet Parking
8'-6"
Arrivals
8" 12" 12" 14"
C4 L1
Arrow Field: Retroreflective, applied 3M High Intensity Reflective Sheeting Series 3930 - #3932 Red.
C2 F2
Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
C3 F3 9" 7"
C1 F1
Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White.
F4
FABRICATION / MATERIAL DETAILS: Sign Face(s): to consist of two aluminum sheets laminated to a honeycomb core w/ an extruded aluminum return all four sides, to produce a flat, rigid panel 1” or 2-1/2” thk as required. All laminated panels shall be manufactured in accordance with Interstate Highway Sign Corp.’s laminated panel specifications and construction details (contact info: 7415 Lindsey Road, Little Rock, AR 72206 (501) 460-4242).
4
05.04
C2 F2 C4
F4
17’-0” min.
C3 F3
Attach to structure in accordance with standards as established by CDOT. Arrow Field: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Paint all exposed surfaces (see Color/Decoration Details above). Aluminum Band: 1/8” thk. aluminum. Attached to back of sign face using stainless steel screws. Clear coat all exposed surfaces (see Color/Decoration Details above). Existing Support Structure: Field varify for installation and attachment methods.
Sign # 020 shown
Addendum
02/16/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
Kerning reduced to 25 to fit @ 13” cap. height
Kerning reduced to 0 to fit @ 13” cap. height
North / South
3
05.05
Single Panel Sign Face Layout B Scale: 3/16” = 1’ - 0”
To Downtown
2
05.05
Single Panel Sign Face Layout A Scale: 3/16” = 1’ - 0”
Addendum
02/13/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
Kerning reduced to -15 to fit @ 14” cap. height
Kerning reduced to -50 to fit @ 14” cap. height
North / South
3
05.05
Single Panel Sign Face Layout B Scale: 3/16” = 1’ - 0”
To Downtown
2
05.05
Single Panel Sign Face Layout A Scale: 3/16” = 1’ - 0”
Addendum
02/13/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes.
11'-0" 5"
The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant.
11'-0"
10'-2"
5"
5"
10'-2"
5"
14" 12" 12" 12" 12" 12"
Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
12"
6"
10'-0"
14" 10'-0"
12" 12" 12" 12" 12"
Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference.
Single Panel Sign Face Layout E
6
05.05
11'-0" 5"
10'-2"
11'-0"
5"
5"
10'-2"
5"
Scale: 3/16” = 1’ - 0”
10'-2"
25'-0" 5"
3'-9"
3'-0"
14" 12"
10'-0"
3'-0"
10'-0"
3'-10"
12"
6"
10'-0" 3'-0"
14"
10 1/2"
10" 12"
12" 12"
14"
14"
14" 12" 6" 12" 12" 12"
Single Panel Sign Face Layout D
11'-0" 5"
3'-0"
10'-0"
5
05.05
Scale: 3/16” = 1’ - 0”
4
05.05
Single Panel Sign Face Layout C Scale: 3/16” = 1’ - 0”
3
05.05
Single Panel Sign Face Layout B Scale: 3/16” = 1’ - 0”
2
05.05
Single Panel Sign Face Layout A Scale: 3/16” = 1’ - 0”
1
ST-102 Sign Face Layout
05.05 Scale: 3/16” = 1’ - 0”
Addendum
02/13/09
PY
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes. The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference. Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation. All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client. Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
3 3/4"
5 1/2" 2'-8 3/4"
7" 3 1/2" 7"
The quality of fit and finish on the final product must meet or exceed the requirements of the client and project site for which it is created, and is subject to sample reviews as deemed necessary by the client and/or design consultant. Colors shown are for reference only, and are subject to the limitations of the printing process, and/or finish material specifications. Refer to finish samples and/or reference color system matching swatches for accurate reference.
6"
Commercial Staging
These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. All final engineering, fabrication, illumination requirements/restrictions, and material used are the responsibility of the fabricator/contractor, and must meet or exceed all required national and local codes.
Messages shown in these drawings are for general reference only. Refer to each site’s specific reference drawings for the actual messages. Internal and/or external illumination, when used, will always be evenly distributed across the sign’s face, and fabricated in a manner that prevents light leaks, hot spots, and/or darks spots. All illumination techniques used must comply with all applicable local illumination codes and requirements, and are the responsibility of the fabricator/contractor.
Sign Panel Elevation - Sign #006 L1 C4 3 1/4"
3 1/4"
5 3/4"
F5 C5
8'-6" 3 3/4" 8 3/4"
5 3/4"
7'-5 1/2"
3" 5 1/2" 7"
base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
C4 Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White.
C5 Support Post & Cap: Tnemec 1c N69-32GR Epoxoline
Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
C6 Horizontal Sign Face Support: Tnemec 1c N69-32GR 1'-10 1/2"
Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat. FABRICATION / MATERIAL DETAILS:
11'-4 1/2"
C4
C3 Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray 3'-6 3/4"
5 1/4" 7" 7"
Airport Exit
7 1/2"
C2 F2
7 1/2" 6"
F3
Reflective Sheeting Series 3930 - #3932 Red.
5 1/4"
Parking Rental Car Return to Terminal
Grade VIP Series 3990 - #3995 Blue.
C2 Arrow Field: Retroreflective, applied 3M High Intensity
7"
C6 F6
COLOR / DECORATION DETAILS:
C1 Sign Background: Retroreflective, applied 3M Diamond
5 1/2"
C1 F1
ILLUMINATION: Non-Illuminated
L1 Frutiger 65 Bold
3 1/4"
5 1/2"
1 05.17
LETTERING:
2 05.17
6 1/4"
9"
F1 Sign Face(s): to be .125” aluminum sheet stitch weld at
return(s) of 4” x 2“ aluminum tubing sign face frame, grind & finish weld smooth. Continuous .125”thk. x 2“ x 8’ - 6”L alum. mounting angles welded to frame & mechanically fastened to horizontal supports.
F2 Arrow Field: to be .125” aluminum sheet w/ 3/16” thk. x 2“ x 12“L angle welded second surface & mechanically fastened to respective return of Sign Face with counter sunk stainless steel screw.
C5 F4
F3 Aluminum Band: Larger rear sign face to accommodate 6” painted band.
5'-3/4"
7 1/2"
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
10'-1 1/2"
1'-6"
5
All locations shown are approximate. All final locations are to be determined during pre-installation site walkthroughs, and must be approved by the client.
2'-8 3/4"
Arrivals Waiting
Scaled examples shown are for reference only, and do not necessarily reflect actual site conditions. Detailed site surveys are required prior to fabrication and installation.
F4 Vertical Support: 6“ sq. aluminum tube. F5 Post Cap @ Vertical Support: 7.5” sq. x 3“h aluminum.
F6 Horizontal Supports: 4” x 2“ aluminum tube.
2 05.18
Addendum
02/16/09
PY
4
Plan View
05.10 Scale: 3/8” = 1’ - 0” GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
C1 F1 5 3/4"
8'-6" 3 3/4" 8 3/4"
5 1/2"
1 05.17
LETTERING:
L1 Frutiger 65 Bold COLOR / DECORATION DETAILS:
C1 Sign Background: Retroreflective, applied 3M Diamond
7'-5 1/2"
Grade VIP Series 3990 - #3995 Blue.
3"
2 05.17
ILLUMINATION: Non-Illuminated 3 1/4"
C2 Arrow Field: Retroreflective, applied 3M High Intensity Reflective Sheeting Series 3930 - #3932 Red.
5 1/2"
C4 L1
3 3/4" 7" 6 3/4"
C6 F6
Grade VIP Series 3990 - #3990 White.
C5 Support Post & Cap: Tnemec 1c N69-32GR Epoxoline
Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
7"
C4
C4 Text & Arrow: 1st surface decorate with 3M Diamond
C6 Horizontal Sign Face Support: Tnemec 1c N69-32GR
5 1/2"
C2 F2
base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
7"
Long Term Parking Airport Exit
C3 Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray
3'-6 1/2"
C5 F5
10'-1 1/2" 3 1/4"
6"
C3 F3
Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat. FABRICATION / MATERIAL DETAILS:
F1 Sign Face(s): to be .125” aluminum sheet stitch weld at 11'-4 1/2"
return(s) of 4” x 2“ aluminum tubing sign face frame, grind & finish weld smooth. Continuous .125”thk. x 2“ x 8’ - 6”L alum. mounting angles welded to frame & mechanically fastened to horizontal supports.
C5 F4
F2 Arrow Field: to be .125” aluminum sheet w/ 3/16” thk. x 2“ x 12“L angle welded second surface & mechanically fastened to respective return of Sign Face with counter sunk stainless steel screw.
6'-11 1/4"
F3 Aluminum Band: Larger rear sign face to accommodate 6” painted band.
F4 Vertical Support: 6“ sq. aluminum tube. F5 Post Cap @ Vertical Support: 7.5” sq. x 3“h aluminum.
F6 Horizontal Supports: 4” x 2“ aluminum tube. .
2 05.18
3
Rear Elevation
05.10 Scale: 3/8” = 1’ - 0”
2
End View
05.10 Scale: 3/8” = 1’ - 0”
1
Front Elevation
05.10 Scale: 3/8” = 1’ - 0”
Addendum
02/16/09
PY
4
Plan View
05.12 Scale: 1/2” = 1’ - 0” GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
C1 F1 C5 F5
ILLUMINATION: Non-Illuminated
6'-9 1/2" 4"
5 1/2"
2"
2 05.17
LETTERING:
1 05.17
L1 Frutiger 65 Bold COLOR / DECORATION DETAILS: Grade VIP Series 3990 - #3995 Blue.
4'-11 1/2"
C2 Arrow Field: Retroreflective, applied 3M High Intensity
3"
C6 F6
Reflective Sheeting Series 3930 - #3932 Red.
5" 5 1/2"
C3 Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
C4 Text & Arrow: 1st surface decorate with 3M Diamond
2'-4 1/2"
3 1/4"
C4
Long Term Parking
5"
C2 F2
6"
C4 L1
8 1/2"
2 1/4"
3 3/4"
4"
C1 Sign Background: Retroreflective, applied 3M Diamond
1'-0"
4"
2"
5'-8"
Grade VIP Series 3990 - #3990 White.
C5 Support Post & Cap: Tnemec 1c N69-32GR Epoxoline
Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
C6 Horizontal Sign Face Support: Tnemec 1c N69-32GR 4"
Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
5 1/4"
C3 F3
1'-3"
return(s) of 3” x 1.5“ aluminum tubing sign face frame, grind & finish weld smooth. Continuous .125”thk. x 1.5“ x 5’ - 8”L alum. mounting angles welded to frame & mechanically fastened to horizontal supports.
9'-1/2"
4 3/4"
C5 F4
5"
Airport Exit
FABRICATION / MATERIAL DETAILS:
F1 Sign Face(s): to be .125” aluminum sheet stitch weld at
F2 Arrow Field: to be .125” aluminum sheet w/ .125” thk. x
1.5“ x 12“L angle welded second surface & mechanically fastened to respective return of Sign Face with counter sunk stainless steel screw.
F3 Aluminum Band: Larger rear sign face to accommodate 4” painted band.
4'-8 1/2"
F4 Vertical Support: 4“ sq. aluminum tube. F5 Post Cap @ Vertical Support: 5.5” sq. x 3“h aluminum.
F6 Horizontal Supports: 3” x 1.5“ aluminum tube.
2 05.18
3
Rear Elevation
05.12 Scale: 1/2” = 1’ - 0”
2
End View
05.12 Scale: 1/2” = 1’ - 0”
1
Front Elevation
05.12 Scale: 1/2” = 1’ - 0”
Addendum
02/13/09
PY
4
Plan View
05.13 Scale: 1/2” = 1’ - 0” GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
C1 F1 C5 F5
4"
2 05.17
2"
2"
5'-8"
LETTERING:
L1 Frutiger 65 Bold COLOR / DECORATION DETAILS:
C1 Sign Background: Retroreflective, applied 3M Diamond 8 1/2"
Grade VIP Series 3990 - #3995 Blue.
4'-11 1/2"
C2 F2
5 3/4"
C4 L1
Reflective Sheeting Series 3930 - #3932 Red.
C3 Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
3 1/2" 5"
C4 Text & Arrow: 1st surface decorate with 3M Diamond Grade VIP Series 3990 - #3990 White.
C5 Support Post & Cap: Tnemec 1c N69-32GR Epoxoline
Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
9 1/4"
C6 F6
C2 Arrow Field: Retroreflective, applied 3M High Intensity
5"
Long Term Parking
C4
2'-8 1/2"
4"
3" 1 1/2"
5'-8"
4"
1 05.17
2'-4 1/2"
5 1/2"
ILLUMINATION: Non-Illuminated
6'-9 1/2"
C6 Horizontal Sign Face Support: Tnemec 1c N69-32GR
Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
4"
C3 F3
FABRICATION / MATERIAL DETAILS:
F1 Sign Face(s): to be .125” aluminum sheet stitch weld at
9'-1/2"
C5 F4
return(s) of 3” x 1.5“ aluminum tubing sign face frame, grind & finish weld smooth. Continuous .125”thk. x 1.5“ x 5’ - 8”L alum. mounting angles welded to frame & mechanically fastened to horizontal supports.
F2 Arrow Field: to be .125” aluminum sheet w/ .125” thk. x 1.5“ x 8“L angle welded second surface & mechanically fastened to respective return of Sign Face with counter sunk stainless steel screw.
5'-11 1/2"
F3 Aluminum Band: Larger rear sign face to accommodate 4” painted band.
F4 Vertical Support: 4“ sq. aluminum tube. F5 Post Cap @ Vertical Support: 5.5” sq. x 3“h aluminum.
F6 Horizontal Supports: 3” x 1.5“ aluminum tube.
2 05.18
3
Rear Elevation
05.13 Scale: 1/2” = 1’ - 0”
2
End View
05.13 Scale: 1/2” = 1’ - 0”
1
Front Elevation
05.13 Scale: 1/2” = 1’ - 0”
Addendum
02/16/09
PY
4
Plan View
05.14 Scale: 1/2” = 1’ - 0” GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
3 05.17
LETTERING:
L1 Frutiger 65 Bold
5'-8"
5 1/2"
COLOR / DECORATION DETAILS:
C5 F5
C4
3 1/2"
Reflective Sheeting Series 3930 - #3932 Red.
C3 Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
2"
5"
Short Term Parking Airport Exit
5"
2'-8 1/2"
C2 F2
C2 Arrow Field: Retroreflective, applied 3M High Intensity
4"
C1 F1
Grade VIP Series 3990 - #3995 Blue.
4'-11 1/2"
C4 Text & Arrow: 1st surface decorate with 3M Diamond
2'-4 1/2"
8 1/2"
Grade VIP Series 3990 - #3990 White.
C5 Support Post & Cap: Tnemec 1c N69-32GR Epoxoline
Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
5"
C4 L1
C1 Sign Background: Retroreflective, applied 3M Diamond
4"
4"
FABRICATION / MATERIAL DETAILS:
3 3/4"
5'-8"
ILLUMINATION: Non-Illuminated
C3 F3
4 05.17
F1 Sign Face(s): to be .125” aluminum sheet stitch weld at
return(s) of 3” x 2“ aluminum tubing sign face frame, grind & finish weld smooth. Continuous .125”thk. x 2“ x 2’ - 4 1/2””L alum. mounting angles welded vertically to frame & mechanically fastened to Vertical Support. Arrow Field: to be .125” aluminum sheet w/ .125” thk. x
9'-1/2"
F2 2“ x 8“L angle welded second surface & mechanically
fastened to respective return of Sign Face with counter sunk stainless steel screw. Aluminum Band: Larger rear sign face to accommo-
F3 date 4” painted band.
C5 F4 5'-11 1/2"
F4 Vertical Support: 4“ sq. aluminum tube. F5 Post Cap @ Vertical Support: 5.5” sq. x 3“h aluminum.
2 05.18
3
Rear Elevation
05.14 Scale: 1/2” = 1’ - 0”
2
End View
05.14 Scale: 1/2” = 1’ - 0”
1
Front Elevation
05.14 Scale: 1/2” = 1’ - 0”
Addendum
02/16/09
PY
4'-0"
3'-4 1/2"
6" 4" 2 3/4" 3" 6 1/2"
5"
6"
1'-0"
2 1/4"
7 1/2"
Sign Panel Elevation Sign #021, 022
5
05.15 Scale: 1/2” = 1’ - 0”
4
Plan View
05.15 Scale: 1/2” = 1’ - 0”
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
3 05.17
ILLUMINATION: Non-Illuminated LETTERING:
L1 Frutiger 65 Bold
5 1/2"
4'-0"
3 3/4"
C5 F5
7 3/4"
COLOR / DECORATION DETAILS:
C1 Sign Background: Retroreflective, applied 3M Diamond Grade VIP Series 3990 - #3995 Blue.
3'-4 1/4"
C4 L1
C2 Arrow Field: Retroreflective, applied 3M High Intensity
C3 F3
5" 5 1/2"
C4 Text & Arrow: 1st surface decorate with 3M Diamond
base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat. 2'-3"
5"
C4
Short Term Parking
Grade VIP Series 3990 - #3990 White.
C5 Support Post & Cap: Tnemec 1c N69-32GR Epoxoline
3" 5 1/2"
C2 F2
C3 Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray
3"
Reflective Sheeting Series 3930 - #3932 Red.
C1 F1
Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat. FABRICATION / MATERIAL DETAILS:
F1 Sign Face(s): to be .125” aluminum sheet stitch weld at
return(s) of 3” x 1.5“ aluminum tubing sign face frame, grind & finish weld smooth. Continuous .125”thk. x 1.5“ x 2’ - 1”L alum. mounting angles welded vertically to frame & mechanically fastened to Vertical Support.
4 05.17
F2 Arrow Field: to be .125” aluminum sheet w/ .125” thk. x 1.5“ x 8“L angle welded second surface & mechanically fastened to respective return of Sign Face with counter sunk stainless steel screw.
F3 Aluminum Band: Larger rear sign face to accommodate 4” painted band.
C5 F4 6'-5”
F4 Vertical Support: 4“ sq. aluminum tube.
3
Rear Elevation
05.15 Scale: 1/2” = 1’ - 0”
2
End View
05.15 Scale: 1/2” = 1’ - 0”
1
Front Elevation
F5 Post Cap @ Vertical Support: 5.5” sq. x 3“h aluminum.
2 05.18
05.15 Scale: 1/2” = 1’ - 0”
Addendum
02/16/08
PY
4
Plan View
05.16 Scale: 1/2” = 1’ - 0”
GENERAL LOCATION / USE: Placed at primary decisions points perpendicular to main traffic flow. Provides direction for vehicular traffic flow to specific primary Airport destinations.
3 05.17
ILLUMINATION: Non-Illuminated LETTERING:
L1 Frutiger 65 Bold 4'-0"
C5 F5
5"
5"
C2 Arrow Field: Retroreflective, applied 3M High Intensity Reflective Sheeting Series 3930 - #3932 Red.
5"
5"
C3 Aluminum Band: Tnemec 1c N69-32GR Epoxoline Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat.
5"
C4
C4 Text & Arrow: 1st surface decorate with 3M Diamond
2'-3"
3 1/2"
F2 C2
Grade VIP Series 3990 - #3990 White.
C5 Support Post & Cap: Tnemec 1c N69-32GR Epoxoline
5 3/4"
C3 F3
Grade VIP Series 3990 - #3995 Blue.
4 1/2"
C4 L1 C1 F1
COLOR / DECORATION DETAILS:
C1 Sign Background: Retroreflective, applied 3M Diamond
Gray base coat w/ 1c 1077-45MT Enduraline Light Steel finish coat. FABRICATION / MATERIAL DETAILS:
F1 Sign Face(s): to be .125” aluminum sheet stitch weld at
return(s) of 3” x 1.5“ aluminum tubing sign face frame, grind & finish weld smooth. Continuous .125”thk. x 1.5“ x 2’ - 1”L alum. mounting angles welded vertically to frame & mechanically fastened to Vertical Support.
4 05.17
F2 Arrow Field: N/A F3 Aluminum Band: Larger rear sign face to accommodate 4” painted band.
F4 Vertical Support: 4“ sq. aluminum tube.
C5 F4
F5 Post Cap @ Vertical Support: 6'-5"
5.5” sq. x 3“h aluminum.
3
Rear Elevation
05.16 Scale: 1/2” = 1’ - 0”
2
End View
05.16 Scale: 1/2” = 1’ - 0”
1
Front Elevation
2 05.18
05.16 Scale: 1/2” = 1’ - 0”
Addendum
02/16/08
PY
Alum. Top Cap
Vertical support post
.125 thk. alum sign face
Sign frame
Continuous weld Alum. angle Horizontal support
Through bolt.
4 Bottom Aluminum Band Detail 05.17 Scale: NTS Sign face frame
Stitch weld face to frame. All return welds ground, sanded and finished smooth.
Horizontal Support Vertical Support Post
1.5” alum. angle
Aluminum angle pocket welded to back of arrow face. S/S F.H.M.S c/s. on 2” o.c.
Through bolt Continuous weld
Sign Frame Sign face
3 Vertical Support Attachment detail 05.17 Scale: NTS
2 Section Detail @ Horizontal Supports & Sign Face 05.17 Scale: NTS
1 Typical Section Detail @ Horizontal Supports & Sign Face 05.17 Scale: 3” = 1’ - 0”
Addendum
02/16/09
PY
1 05.18
2 Section: Post Mount Ground Attachement 05.18 Scale: 1” = 1’ - 0”
1 Detail: Ground Mounted 05.18 Scale: NTS
Addendum
02/16/09
PY
05.18
Colorado Springs Airport General Aviation
Colorado Springs Airport
Addendum
02/13/09
PY
Air Cargo
Refer to Sheet 5.10 Dtl. 5 for Sign Face Layout. Final location to be determined by Colorado Springs Airport
Commercial Staging Arrivals Waiting
Addendum
02/13/09
PY
Final location to be determined by Colorado Springs Airport
Long Term Parking Airport Exit
Long Term Parking Airport Exit
Long Term Parking
Addendum
02/13/09
PY
Valet Parking
Short Term Parking Airport Exit
Rental Car Return
Addendum
02/13/09
PY
Final location to be determined by Colorado Springs Airport
Short Term Parking Airport Exit
Short Term Parking Airport Exit
Short Term Parking Airport Exit
Addendum
02/13/09
PY
Final location to be determined by Colorado Springs Airport
Airport Exit
Short Term Parking
Final location to be determined by Colorado Springs Airport
Rental Car Return Short Term Parking
Addendum
02/16/09
PY
Airport Exit
Valet Parking
Addendum
02/16/09
PY
Parking Rental Car Return to Terminal Airport Exit
Overflow & Employee Parking Air Cargo
Addendum
02/13/09
PY
Airport Exit Rental Car Service Area
To be located in Gore. Final location to be determined by Colorado Springs Airport
Return to Terminal Rental Car Parking Airport Exit
Addendum
02/16/09
PY
Parking Rental Car Return to Terminal
Need for sign to be confirmed w/ Colorado Springs Airport
Air Cargo
Addendum
02/13/09
PY
General Aviation
Airport Exit Short Term Parking
Addendum
02/13/09
PY
ST-120
Employee Parking Air Cargo Overflow Lot
Addendum
02/16/09
PY
07.12