Mullion by pwest

150N BUOYANCY PROTECTION

FLOATATION GARMENTS & LIFE JACKETS

Mullion Marine Safety and Personal Floatation Devices (PFDâ&#x20AC;&#x2122;s) are designed to protect lives in some of the harshest and unforgiving environments known to man. Our focus is to design and produce the best possible safety solutions to meet different end uses combining comfort and durability with technical safety and protection. FISG Branding Subgroup

Sadly, lives have consistently been lost to the cruel and unforgiving seas, with far too many modern day tragedies, often due to the wearerâ&#x20AC;&#x2122;s lack of protective clothing or lifejackets.

le Sheet

ave worked on improving the image of the FISG brand and new style guide to go with the logo, typeface and colours

Our Lifejackets, Floatation and Immersion suits are the preferred choice of workers in offshore energy oil and gas exploration; wind farm operations; commercial and inshore fishing; inland lakes and waterways; ports, docks and harbours; fisheries protection; coast guards; search and rescue; emergency services; international shipping and coastal communities worldwide.

SINGLE CHAMBER BLADDER EN ISO APPROVED INTRODUCTION

THE SEA SHALL NOT HAVE THEM

FAIR WINDS AND FOLLOWING SEAS TO ALL WHO SAIL IN MULLION!

Mini Logo

22mm (smallest)

Mini Logo

FISG Branding Subgroup

FISG Logo and Style Sheet

22mm (smallest)

ers

king on the uses of the logo by members is however envisaged that each FISG ported or initiated projects will be required to ociated qualifying phrases.

The FISG branding subgroup have worked on improving the image of the FISG brand and as part of this work propose a new style guide to go with the logo, typeface and colours chosen by the subgroup.

GUIDANCE IN SELECTION OF APPROPRIATE PERSONAL FLOATATION DEVICES Follow the checklist below to make the right choise of floatation garment:

Typeface Typeface: lucida Sans, Regular

CERTIFIED

Colours ! ! !

CMYK, 100,79,36,28 RGB:! 21,55,92 Pantone: 534C

Check legal requirements Check requirements of national administration according to country / area of use

Blue Background Main and Mini Logo

member

Check own company requirements Est. 1994

22mm (smallest)

White Background Main and Mini Logo

22mm (smallest)

Check own company risk assessments Perform own risk assessment if none already existing

Assess area of use and nature of work to be carried out Consider associated clothing / equipment to be worn and assess compatibility of all PPE with LSA product to be worn Check application of use according to the normative standards Select appropriate product according to area and application of use

FLOATATION GARMENTS

LIFE JACKETS

AQUAFLOAT

COMPACT 150

Superior Suit (1MH4) . . . . . . . . . . . . . . . . . . . . . . . . . . pg 14 Superior Jacket (1MM8) . . . . . . . . . . . . . . . . . . . . . . . pg 15 Superior Trouser (1MQ3) . . . . . . . . . . . . . . . . . . . . . pg 15 Supreme Suit (1MD7) . . . . . . . . . . . . . . . . . . . . . . . . . pg 16 Harness Jacket (1MM7) . . . . . . . . . . . . . . . . . . . . . . . pg 17 Seamaster II Jacket (1MJB) . . . . . . . . . . . . . . . . . . . . pg 18

Compact Regular (3MV1) . . . . . . . . . . . . . . . . . . . . . pg 56 Compact Wipe Clean (3MV7) . . . . . . . . . . . . . . . . pg 56 Compact Heavy Duty Wipe Clean (3MVE) . . pg 57 Compact Locator (3MVL) . . . . . . . . . . . . . . . . . . . . . pg 57

NORTH SEA & SEAPORT

HI-TIDE 150

North Sea I Suit (1MHA) . . . . . . . . . . . . . . . . . . . . . . . pg 22 North Sea II Suit (1MI8) . . . . . . . . . . . . . . . . . . . . . . . pg 22 Seaport Suit (1MHE) . . . . . . . . . . . . . . . . . . . . . . . . . . pg 23

Hi-tide Regular (3MV4) . . . . . . . . . . . . . . . . . . . . . . . pg 62 Hi-tide Wipe Clean (3MVB) . . . . . . . . . . . . . . . . . . . pg 63 Hi-tide Locator (3MVF) . . . . . . . . . . . . . . . . . . . . . . . . pg 63

X5000 COMFORT

CRUISER 150 (1MV6) . . . . . . . . . . . . . . . . . . . . . . . pg 65

X5000 Suit (1MG9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 26 X5000 Jacket (1MMG) . . . . . . . . . . . . . . . . . . . . . . . . . pg 27 X5000 Trouser (1MQS) . . . . . . . . . . . . . . . . . . . . . . . . pg 27

NEPTUNE 150

EXTREME FRC II Suit (1MC3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 30 FRC III Suit (1MC4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 31 Powerfloat Suit (1MHP) . . . . . . . . . . . . . . . . . . . . . . . . pg 32 X6 Suit (1MH9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 34 X6 Jacket (1MJA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 35 X6 Trouser (1MQ3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 35

SOLAS IMMERSION SUIT Smart Solas Suit 1A (1MG4) . . . . . . . . . . . . . . . . . . pg 40 Thermal Liner Suit (1MC6) . . . . . . . . . . . . . . . . . . . pg 41 Smart Solas Suit 2A (1MG5) . . . . . . . . . . . . . . . . . . pg 42 Smart Dry Suit (1MHW) . . . . . . . . . . . . . . . . . . . . . . . pg 43

STREAM 150 (3MVH) . . . . . . . . . . . . . . . . . . . . . . . pg 58

SINGLE CHAMBER BLADDER EN ISO APPROVED INDEX

INDEX

Neptune Regular (1MV8) . . . . . . . . . . . . . . . . . . . . . pg 68 Neptune Wipe Clean (1MY4) . . . . . . . . . . . . . . . . . pg 68 Neptune Welders (1MYD) . . . . . . . . . . . . . . . . . . . . . pg 69 Neptune FR AST (1MUI) . . . . . . . . . . . . . . . . . . . . . . . pg 70 Neptune FR AST Hi-Vis (1MUE) . . . . . . . . . . . . . . pg 71

MARINER 275 Mariner Regular (1MU4) . . . . . . . . . . . . . . . . . . . . . . pg 74 Mariner Wipe Clean (1MU9) . . . . . . . . . . . . . . . . . . pg 75 Mariner Heavy Duty (1MXH) . . . . . . . . . . . . . . . . . pg 75 Mariner FR AST (1MUJ) . . . . . . . . . . . . . . . . . . . . . . . pg 76 Mariner FR AST Hi-Vis (1MUF) . . . . . . . . . . . . . . . pg 77 Mariner Welders (1MYG) . . . . . . . . . . . . . . . . . . . . . pg 77

SEAFORCE (3MV9) . . . . . . . . . . . . . . . . . . . . . . . . . pg 80

SPECIAL PURPOSE

SOLAS HI-RISE 150

Seaforce (1MN2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 46

Hi-Rise Regular (2MSF) . . . . . . . . . . . . . . . . . . . . . . . pg 84 Hi-Rise Wipe Clean (2MSG) . . . . . . . . . . . . . . . . . . pg 85 Hi-Rise Regular + Sprayhood (2MSQ) . . . . . . . pg 85

SOLAS HI-RISE 275 Hi-Rise Regular (2MS1) . . . . . . . . . . . . . . . . . . . . . . . pg 86 Hi-Rise Wipe Clean (2MS2) . . . . . . . . . . . . . . . . . . . pg 87 Hi-Rise Harness (2MT2) . . . . . . . . . . . . . . . . . . . . . . . pg 87 Hi-Rise SOS Beacon (2MT1) . . . . . . . . . . . . . . . . . . pg 88 Hi-Rise Regular + Sprayhood (2MS9) . . . . . . . . pg 89 Hi-Rise Wipe Clean + Sprayhood (2MTD) . . . pg 89

Floatation garments provide protection from the elements whilst working, and in the event of an accidental immersion, prolong life and aid rescue. All Mullion Floatation garments are designed for constant wear and are classified as 50 Newton PFDs(*).

THE KEY PROTECTION FACTORS GIVEN ARE: 1. For working use Comfort and warmth

FLOATATION GARMENTS

2. For water immersion Floatation of wearer in water to prolong survival Reduction of cold shock and the effect of hypothermia in water Allows the wearer to manoeuvre himself in the water and to be recovered without encumbrance

INTRODUCTION

Waterproofing to EN 343

Conspicuousness in the water to aid recovery

(*) PFD: Personal Floatation Device which, when correctly worn and used in water, will provide the user with a specific amount of buoyancy which will increase the likelihood of survival. A PFD can be in the form of either an inherently buoyant foam garment or an inflatable lifejacket.

The aim of Mullion constant wear floatation garments is to protect against accidental immersion in water by providing the inherent buoyancy to assist a person in staying afloat, with the added advantage of a certain degree of protection against cold water shock and hypothermia while in the water. These garments are designed to be comfortable to wear for constant working use and will keep the wearer warm and dry while doing so. In the case of accidental immersion or a Man Overboard situation these garments will float the wearers indefinitely in a comfortable position and allow them to swim to a rescue boat or liferaft without encumbrance. These suits will not self-right the wearer automatically if face-down or unconscious in the water. Therefore, it is recommended that they are always worn in combination with a 275N lifejacket to guarantee the optimum performance , including automatic self-righting. It is also recommended that for two piece versions the Jacket and Trouser are always worn together to achieve optimum performance and protection.

The suits are designed with anti-flushing straps to arms and legs. These can be used upon immersion. After falling in the water the anti-flushing straps can be tightened so the water in the suit can be warmed up by the body temperature of the wearer which will delay hypothermia.

5. MARINE GRADE WHISTLE The Marine grade ISO 12402 approved whistle is attached to the suit and can be used in immersion situations to alert rescue teams. The whistle is positioned in the optimum position and placed for ease of access.

6. SOLAS APPROVED RETRO REFLECTIVE TAPE ON SUITS

STANDARD FEATURES 1. GARMENT FULLY WATERPROOF All outer materials on the constant wear suits are waterproof and conform to the standard EN 343. All seams on the suits are taped and 100% waterproof. The pocket flaps are fully water repellant and a storm flap which covers the front zipper will give optimum waterproofness of the suit/jacket.

To increase visibility of the wearer, retro reflective tapes on the hood and/or wrists and/or arms and/ or chest and/or legs are added.

7. EASY DONNING The suits have either zips or wide legs for ease of donning over boots or shoes.

FLOATATION GARMENTS

4. ANTI-FLUSHING STRAPS

STANDARD FEATURES

CONSTANT WEAR SUITS

2. INHERENT BUOYANCY The buoyancy of the floatation garment is created by a closed cell foam. The Mullion suits have an inherent actual buoyancy varying from a minimum of 50N to 100N.

outer fabric

closed cell foam lining

3. PROVIDES A DEGREE OF THERMAL PROTECTION The suits provide a degree of thermal protection against cold water shock and delay hypothermia upon immersion.

8. HOOD AND COLLAR WITH BUILT-IN CHIN AND FACE PROTECTION To increase comfort and to give the wearer optimum protection in heavy weather conditions a hood and collar is added with built-in chin and face protection.

9. POCKETS WITH FLEECE OR FOAM HAND WARMER LINING On every suit there are pockets (on the chest or hips) with fleece or foam lining to keep hands comfortably dry and warm.

FLOATATION GARMENTS NORTH SEA RANGE

SUPERIOR Jacket

SUPERIOR Trousers

SUPREME 1 piece Suit

HARNESS Jacket

SEAMASTER II Jacket

EN ISO 12402-5/6

EN 393

EN 393 Option: EN ISO 12401

EN 393

74N

together with Superior Trousers 88 N

together with Superior Jacket 88 N

74N

together with Superior Trousers 88 N

74N

121N

74N

88N

300D*

210D*

300D*

Knees + Seat (450D)

Seat (450D)

Knees + Seat (450D)

—

Knees + Seat (450D)

ID Pocket

Yes

Special features

—

Optional Harness (EN ISO 12401)

High-visibility (EN 471)

—

High-visibility

High-visibility Breathability

Red/Navy

Yellow/Navy

Red

Hi-Vis Yellow/ Navy

Red/Black

Hi-Vis yellow/ Black

Reference

1MH4

1MM8

1MQ3

1MD7

1MM7

1MJB

1MHA

1MI8

1MHE

1MG9

1MMG

1MQS

Sizes

S-3XL

XS-4XL

Page

pg 14

pg 15

pg 16

pg 17

pg 18

pg 22

pg 23

pg 26

pg 27

Actual Buoyancy level (size L) Fabric Extra abrasion resistance

Colour

(*) D = Denier

NORTH SEA II 2 piece Suit

X5000 COMFORT RANGE

SUPERIOR 1 piece Suit Standard

NORTH SEA I 1 piece Suit

OVERVIEW

AQUAFLOAT RANGE

SEAPORT 1 piece suit

EN ISO 12402-5/6 EN ISO 12402-5/6 EN ISO 12402-5/6

X5000 1 piece suit EN393

X5000 Jacket

X5000 Trousers

EN ISO 12402-5/6 EN ISO 12402-5/6

“

The Aquafloat Range is our broadest range of floatation garments covering all general requirements of a demanding end-user. It is available in a variety of one piece suits, jackets and trousers appropriate to different end uses.

THE AQUAFLOAT RANGE COVERS ALL GENERAL REQUIREMENTS OF A DEMANDING END-USER

”

Superior Suit

Superior Jacket

50N BUOYANCY PROTECTION

Professional Range of Floatation Suits.

FLOATATION GARMENTS

AQUAFLOAT RANGE

Superior Trouser

13 Supreme Suit

Harness Jacket

Seamaster II Jacket

ISOISO 12402-5/6 EN 12402-5

EN 343: 1998

AQUAFLOAT SUPERIOR SUIT EN 343

BUOYANCY 74N

1MH4 EN ISO 12402

SUPERIOR BENEFITS High collar + extra protective chin strap with touch and close fastening High-visibility yellow adjustable insulated peaked hood, with built-in chin and face protection stowed in collar Elasticated back waist ID pocket on the chest Reinforcement panels added to knees and seat area.

AQUAFLOAT SUPERIOR JACKET

1MM8

AQUAFLOAT SUPERIOR TROUSERS

1MQ3

EN 343

EN 393

EN 343

EN 393

JKT + TRS: BUOYANCY 88N

50N BUOYANCY PROTECTION

FLOATATION GARMENTS

EN 343: 1998

KEY FEATURES Fully waterproof outer fabric + taped seams Retro-reflective tape on hood, upper arms, wrists and ankles Adjustable waist belt

The Aquafloat Superior jacket has similar features to the Superior one piece suit.

The Aquafloat Superior trouser has similar features to the Superior one piece suit.

Additional features to AQUAFLOAT SUPERIOR SUIT:

It is recommended to combine with the jacket as a twopiece suit for the optimum protection

Storm flap

Crutch strap for wearerâ&#x20AC;&#x2122;s safety

5 pockets: 2 chest pockets with water repellent flaps + marine grade whistle, 2 lower hip pockets with fleece hand warmer, 1 Napoleon pocket under storm flap

Elasticated draw cord with toggles in the hem

Additional features to AQUAFLOAT SUPERIOR SUIT: +

Two lower hip pockets with fleece hand warmer in adition to the jacket

Adjustable elastic shoulder braces

Reinforcement panels added to knees and seat area Leg zips for ease of donning over boots Anti-flushing straps to arms and legs with easy grip pull tabs Inner adjustable neoprene wrist seals

AQUAFLOAT SUPREME EN 343

BUOYANCY 74N

1MD7 EN 393

SUPERIOR BENEFITS

KEY FEATURES

High collar + extra protective chin strap with touch and close fastening

Fully waterproof outer fabric + taped seams

High-visibility yellow adjustable insulated peaked hood, with built-in chin and face protection stowed in collar

Adjustable waist belt

Reinforcement panels added to knees and seat area.

Retro-reflective tape on hood, upper arms, wrists Storm flap 5 pockets: 2 chest pockets with water repellent flaps + marine grade whistle, 2 lower hip pockets with fleece hand warmer, 1 inner pocket Leg zips for ease of donning over boots Anti-flushing straps to arms and legs Inner fixed neoprene wrist seals

FLOATATION GARMENTS

EN 343: 1998

AQUAFLOAT HARNESS JACKET

1MM7

EN 343

EN 393

JKT + TRS: BUOYANCY 88N

50N BUOYANCY PROTECTION

EN 343: 1998

The Aquafloat Harness jacket is a uni-colour red jacket designed to add an EN ISO 12401 deck safety harness to the harness apertures included on the chest. It can be supplied with or without the harness pre-fitted.

SUPERIOR BENEFITS

KEY FEATURES

High collar + extra protective chin strap with touch and close fastening

Fully waterproof outer fabric + taped seams

High-visibility yellow adjustable insulated peaked hood, with built-in chin and face protection stowed in collar

Storm flap

Harness apertures included on chest for adding a EN ISO 12401 harness

Retro-reflective tape on hood, shoulders and wrists 5 pockets: 2 chest fleece lined handwarmer pockets with water repellent flaps + marine grade whistle, 2 lower hip pockets,1 Napoleon pocket under storm flap

Easy access at the hem for adding logos on the back of the jacket

Crutch strap for wearerâ&#x20AC;&#x2122;s safety

Lifejacket attachment loops on front chest and back neck for secure fitting of lifejacket

Inner fixed neoprene wrist seals

Concealed internal waist belt for snug fit

Anti-flushing straps to wrists with easy grip pull tabs

Optional extras: pre-fitted EN ISO 12401 deck safety harness

FLOATATION GARMENTS

3 1 EN 343: 1998

3 2

SEAMASTER II JACKET EN 343 JKT + TRS: BUOYANCY 88N EN 393

50N BUOYANCY PROTECTION

EN 471: 1994

1MJB EN 471

The Aquafloat Seamaster II jacket is an EN471 highvisibility yellow multi-pocket floatation jacket designed to achieve maximum visibility when worn day and night. It is recommended to combine with the Aquafloat Superioir trousers as a two-piece suit for the optimum protection.

SUPERIOR BENEFITS High collar with extra protective chin strap with touch and close fastening High-visibility yellow adjustable insulated peaked hood, with built-in chin and face protection stowed in collar ID pocket on the chest Loop on left sleeve to add a light or other accessory Hi Visibility yellow fabric + reflective tape areas designed to achieve optimum conspicuousness and fully certified to EN471 standard Concealed internal waist belt for snug fit

KEY FEATURES Fully waterproof outer fabric + taped seams Retro reflective tape on hood, shoulders, back, front chest, upper and lower arms Storm flap 9 pockets: 2 lower chest pockets with fleece hand warmer, 2 hip pockets with water repellent flaps, 1 sleeve pocket + marine grade whistle, 1 radio pocket on chest, 1 napoleon pocket under storm flap, 1 ID pocket on chest, 1 inner pocket Crutch strap for wearerâ&#x20AC;&#x2122;s safety Anti-flushing straps to wrists with easy grip pull tabs

Newest range in the Mullion collection created to offer a basic range of floatation suits which are certified according to the latest standard EN ISO 12402. The Mullion North Sea range is available in 3 variations appropriate to different end uses.

“

CONSTANT WEAR, GENERAL DECK AND CREW USE

”

North Sea I

North Sea II

FLOATATION GARMENTS

Active Range of Floatation Suits.

50N BUOYANCY PROTECTION

NORTH SEA AND SEAPORT RANGE

Seaport Suit

ISOISO 12402-5/6 EN 12402-5

3 1

EN 343: 1998

NORTH SEA I ONE PIECE SUIT EN 343

BUOYANCY 74N

NORTH SEA II TWO PIECE SUIT

1MHA EN ISO 12402

The North Sea I – one piece suit is ideal for general utility use by deck hands, boat crew and fishermen.

KEY FEATURES Fully waterproof outer fabric + taped seams

EN 343

BUOYANCY 121N

1MI8 EN ISO 12402

Storm flap 7 pockets: 2 chest pockets with water repellent flaps with marine grade whistle, 2 lower hip pockets with fleece hand warmer, 1 Napoleon pocket under storm flap and 2 inner pockets

EN 343

BUOYANCY 74N

1MHE EN ISO 12402

The North Sea II – two piece suit is ideal for use in the same areas as the one piece but with the added flexibility and comfort afforded by separate jacket and trousers.

The Seaport suit is ideal for general utility use by deck hands, boat crew and fishermen. Also ideal for port and dock workers where high-visibility features are important.

This two piece suit is sold as a combination. It is not available to buy jacket and/or trousers separately.

SUPERIOR BENEFITS

Retro-reflective tape on hood and chest High-visibility yellow adjustable insulated peaked hood, with built-in chin and face protection stowed in collar

SEAPORT SUIT

Additional features to NORTH SEA I - ONE PIECE SUIT:

50N BUOYANCY PROTECTION

FLOATATION GARMENTS

EN 343: 1998

ISOISO 12402-5/6 EN 12402-5

KEY FEATURES

High-visibility sleeves and shoulders, collar and hood for optimum conspicuousness

Fully waterproof outer fabric + taped seams

Main body colour of black combats stains and soiling

High-visibility yellow adjustable insulated peaked hood, with built-in chin and face protection stored into collar

Retro-reflective tape on hood and chest

Crutch strap added to the jacket for wearer’s safety

Trousers with adjustable elasticated braces

Retro-Reflective tape on the wrist straps also enhances visibility

Two hip pockets on the trousers in addition to the jacket

Air escape holes on the back to alleviate trapped air

Storm flap

ID pocket on left upper arm

8 pockets: 2 chest pockets with zips with marine grade whistle, 2 lower hip pockets with fleece hand warmer and zip closure, 2 leg pockets and 1 inner pocket, 1 ID pocket

Leg zips for ease of donning over boots

Elasticated back

Anti-flushing straps to wrists & ankles

Leg zips for ease of donning over boots Anti-flushing straps to arms & legs Inner adjustable neoprene wrist seals

Breathable Floatation Suits. The X5000 Comfort Range is available in a one piece suit or a jacket and trousers which are designed to offer maximum breathability for the wearer.

“

”

X5000 Suit

X5000 Jacket

50N BUOYANCY PROTECTION

Ideal for use in yachting and leisure activities.

FLOATATION GARMENTS

X5000 COMFORT RANGE

X5000 Trousers

DESIGNED FOR MAXIMUM BREATHABILITY

ISOISO 12402-5/6 EN 12402-5

3 1

EN 343: 1998

X5000 SUIT EN 343

1MG9 BUOYANCY 88N

X5000 JACKET

EN 393

SUPERIOR BENEFITS High breathability for active use without discomfort Specially developed lining combined with perforated foam to optimize breathability and wicking of perspiration for wearer comfort

EN 343

Fully waterproof + highly breathable outer fabric + taped seams Highly breathable foam + wicking lining complex Retro-reflective tape on hood, chest, wrists and ankles Storm flap and extra protective chin strap with touch and close fastening

Lightweight and flexible for ease of movement in active use

6 pockets: 2 fleece lined chest hand warmer pockets, 2 hip pockets with zip closures and 2 inner pockets

High adjustable collar + adjustable insulated peaked hood + chin strap for optimum face protection zipped into collar Elasticated waist + waist belt in enclosed tunnel for comfort of fit

X5000 TROUSERS

EN ISO 12402

EN 343

1MQS EN ISO 12402

KEY FEATURES

Additional ventilation system at underarms and across upper back and chest High visibility hood, collar strip, waist strip, upper body and arms + silver reflective piping feature for optimum conspicuousness

1MMG

50N BUOYANCY PROTECTION

FLOATATION GARMENTS

EN 343: 1998

ISOISO 12402-5/6 EN 12402-5

The X5000 jacket is ideal for use in the same areas as the one piece but with the added flexibility and comfort afforded by separate jacket and trousers. The jacket can be worn on its own but it is highly recommended to combine with the trousers as a two piece suit for the optimum protection. Additional features to X5000 – ONE PIECE SUIT:

Leg zips for ease of donning over boots

Anti-flushing straps to wrist and ankles with easy grip pull tabs

Elasticated draw cord with toggles in the hem for securement and snug fit

Crutch strap added to the jacket for wearer’s safety

Inner adjustable neoprene wrist seals

The X5000 trousers have similar features to the X5000 suit. They can be worn in combination with the X5000 jacket. Additional features to X5000 – ONE PIECE SUIT: +

Adjustable elasticated shoulder braces

Reinforcement panels added to knees and seat area

Two hip pockets on the trousers in addition to the jacket

Floatation Suits Designed to Fulfil Requirements in Extreme Conditions. The extreme range is specifically designed to give extra buoyancy and thermal protection and to diminish snagging hazards in extreme conditions. The range is designed with superior reinforcement panels on knees and seat areas for enhanced abrasion resistance. These floatation suits are created for FRC (Fast Rescue Craft), Lifeboat and RIB (Rigid Inflatable Boat) operators and to fulfill the requirements of extreme conditions.

EXTREME RANGE

“

FLOATATION GARMENTS

EXTREME RANGE

The Extreme Range is available in 6 variations appropriate to different end uses.

EXTREME WEAR, PILOTS, RIB, FRC AND LIFEBOAT OPERATORS AND CREWS

”

FRC RANGE

X6 RANGE

FRC II 1 Piece suit

FRC III 1piece suit + lifejacket

POWERFLOAT 1 Piece suit

X6 1 piece suit

X6 Jacket

X6 Trousers

EC Directive 89/686/EEC

EC Directive 89/686/EEC EN399

EN 393

EC Directive 89/686/EEC

Actual Buoyancy level (size L)

104 N

104N + 302N suit + lifejacket

88N

91N

Together with X6 Trousers: 108N

Together with X6 Jacket: 108N

Fabric

300D

Front leg + Seat (450D)

Full Front + Seat (450D)

Knees + Seat (600D)

Seat (600D)

Knees + Seat (600D)

Standard

Extra abrasion resistance ID Pocket

Yes

—

Premium waterproofing

—

International Flame/Black

Integrated Lifejacket International Flame/Black

Yellow/Black

International Flame/Navy

Reference

1MC3

1MC4

1MHP

1MH9

1MJA

1MQ3

Sizes

S-3XL

Page

pg 30

pg 31

pg 32

pg 34

pg 35

Special features Color

EN ISO 12402-5 3 3

EN 343: 1998

EXTREME RANGE

FLOATATION GARMENTS

EN 343: 1998

FRC2 SUIT EN 343 BUOYANCY 104N

1MC3

FRC3 SUIT

EC Directive 89/686/EEC

The FRC2 Suit has a lower collar than suits in our other ranges to avoid interference when wearing a safety helmet and to guarantee excellent 180째 visibility for the operators. The hood is extended to fit over a crash helmet. It has superior reinforced panels added to the front leg, back leg and seat area and has extra foam added on the chest to give optimum buoyancy and wind chill resistance in extreme conditions. Attachment points on the suit make it possible to securely fit a lifejacket on top of it.

1MC4

EN 399 BUOYANCY 104N+302N EC Directive 89/686/EEC

SUPERIOR BENEFITS

KEY FEATURES

Extended hood to fit over safety helmets

Fully waterproof outer fabric + taped seams

Low collar to avoid interference with safety helmet

Adjustable waist belt

Extra foam boosters on the chest to give optimum buoyancy protection and wind chill resistance

Storm flap with extra protective chin strap with touch and close fastening.

High abrasion resistance reinforcement panels added to front and back legs + seat area

3 pockets: 2 lower hip pockets foam lined and 1 sleeve pocket + marine grade whistle

SOLAS approved retro-reflective tape on hood, upper arms and wrists

Anti-flushing straps to wrists, thighs and ankles

Lifejacket attachment loops to front chest and back neck

The FRC3 Suit has the same features as the FRC2 Suit but has an incorporated inflatable 275N lifejacket (EN 399). Additional features to FRC2 SUIT: +

Integrated 275N lifejacket (EN 399)

Heavy duty high abrasion resistant reinforcement fabric to front chest and lifejacket cover to protect the lifejacket from being damaged

OPTIONAL EXTRAS Neoprene wrist and ankle seals to offer semi-dry suit protection and prevent water ingress when operating open exposed craft

3 1

EXTREME RANGE

FLOATATION GARMENTS

EN 343: 1998

POWERFLOAT EN 343

1MHP BUOYANCY 88N

EN 393

The Powerfloat suit in stylish yellow/black design, is designed to keep rescue teams warm and dry in the most extreme circumstances. A special technical construction of superior waterproofing in the seat and crutch combined with double storm flaps in the front will provide superior waterproofness in extreme conditions. The hood is designed to fit snugly to the head during high speed operations. The Powerfloat has ventilation openings in the back to improve breathability. Attachment points on the suit make it possible to securely fit a lifejacket on top of it.

SUPERIOR BENEFITS

KEY FEATURES

Elasticated back waist

Fully waterproof outer fabric + taped seams

Reinforcement panels added to front and back legs

Adjustable waist belt

Air escape holes in the back

Retro-reflective tape on hood, upper arms and wrists

High collar + extra protective chin strap with touch and close fastening

7 pockets: 2 chest pockets with gusset and water repellent flaps + marine grade whistle, 2 lower hip pockets with fleece hand warmer, 1 sleeve ID pocket, 1 Napoleon pocket under storm flaps, 1 inner pocket

High-visibility yellow insulated peaked hood, zipped onto collar Double storm flaps to give enhanced waterproof and wind chill protection Special superior waterproof construction to crutch and seat area ID pocket on the left sleeve

Leg zips for ease of donning over boots Anti-flushing straps to arms and legs + easy grip pull tabs Inner adjustable neoprene wrist seals

EN ISO 12402-5

3 1

EN 343: 1998

EXTREME RANGE

FLOATATION GARMENTS

EN 343: 1998

EN ISO 12402-5

X6 SUIT EN 343

1MH9 BUOYANCY 91N

X6 JACKET

EC Directive 89/686/EEC

SUPERIOR BENEFITS

EN 343

Fully waterproof outer fabric + taped seams

High abrasion resistance reinforcement panels added to knees and seat area

Adjustable waist belt

Extra pocket on the right arm for strobe light No chest pockets to minimize snagging hazards High collar + extra protective chin strap with touch and close fastening High-visibility yellow adjustable insulated peaked hood, with built-in chin and face protection stowed in collar SOLAS approved retro-reflective tape on hood, upper arms and wrists

JKT + TRS: BUOYANCY 108N EC Directive 89/686/EEC

X6 TROUSERS EN 343

1MQ4

JKT + TRS: BUOYANCY 108N EC Directive 89/686/EEC

KEY FEATURES

Extra foam boosters on the chest to give added buoyancy protection and wind chill resistance

ID pocket on the left sleeve

1MJA

Storm flap 7 pockets: 2 lower hip pockets with fleece hand warmer lining, 2 sleeve pockets + marine grade whistle in left sleeve pocket, 1 ID pocket, 1 napoleon pocket, 1 inside pocket

The X6 jacket is ideal for use in the same areas as the one piece suit but with the added flexibility and comfort afforded by separate jacket and trousers. This jacket must be combined with the X6 Trousers for wear as a two piece suit to conform to the approval.

Adjustable elasticated shoulder braces

Additional features to X6 SUIT:

Leg zips for ease of donning over boots

Reinforcement panels added to seat area in addition to trousers

Anti-flushing straps to wrists and ankles with easy grip pull tabs

Crutch strap for wearerâ&#x20AC;&#x2122;s safety

Inner adjustable neoprene wrist seals

Additional features to X6 SUIT:

This level of Immersion Suit is regulated by the International Maritime Organization (IMO) under the International Convention for Safety of Life at Sea (SOLAS). In accordance with the SOLAS requirements and according to the LSA (Life Saving Appliances) Code, Chapter II, 2.3: • Where required as Immersion suits, they are designed to cover the whole body (including boots to cover the feet), with the exception of the face and with separate gloves that are permanently attached to the suit. • Where required as Anti-Exposure suits only, they can be designed and supplied without the boots fitted (as permitted by the Administration) and equipped with a pocket for a portable VHF radio / telephone. An Immersion Suit is a protective suit which reduces the body heat loss of a person wearing it in cold water and is designed to protect the user’s body from the subsequent cooling effects of unintended immersion in water including cold shock and hypothermia. The primary aims in wearing an Immersion suit are: • to reduce the risk of cold shock and delay the onset of hypothermia; • to enable the user to propel himself in the water and16hextricate himself from the water without it becoming an encumbrance; 8h so as to aid his recovery. • to make the user sufficiently conspicuous in the water

“

IDEAL FOR OFFSHORE INSTALLATIONS, OFFSHORE SUPPLY VESSELS, BULK CARRIERS, COMMERCIAL SHIPS, CONTAINER AND FREIGHT SHIPS OPERATING IN COLD WATER AREAS

”

0,75 0,50 0,33

SMART SOLAS RANGE EXTREME

FLOATATION GARMENTS

SOLAS IMMERSION + ANTI-EXPOSURE SUITS

0,20

4h The complete Immersion Suit System (suit together with clothes worn underneath) should be able to keep the user alive long enough for the rescue services2hto find and recover them. An individual’s estimated thermal protection time will depend on water temperature and wave state as well as their 1h expected survival times. physiology. See table below for approximate guide–lines of <5°C 10°C 15°C >15°C

An un-insulated immersion suit or anti-exposure suit is intended to provide the wearer with up to 1 hour protection in a water temperature range of > 5°C An insulated immersion suit is intended to provide the wearer with up to 6 hours protection in a water temperature range of > 0°C. THERMAL PROTECTION CATEGORIES

immersed CLO

0,20

0,33

0,50

0,75

0,20

0,33

0,50

< 5°C

1,5h

2,5h

5°C - 10°C

1,5h

2,5h

4,5h

10°C - 15°C

> 15°C

15h

water temperature

estimated protection time

0,75

6 5 4

1MHW

15h

1MG4

24h

—

1MG5 1MG4 + 1MC6

0 <5°C

10°C

15°C

>15°C

1. SOLAS APPROVED Approved to 2010 SOLAS regulations (according to MSC.81(70); MSC.200(80), MSC.207(81), MSC.226(82)).

4. BOOTS, GLOVES AND HOOD Provide thermal protection to the head, hands and feet on water immersion.

Offshore Immersion and Anti-exposure Suits SOLAS IMMERSION SUITS USED BY: Large sea-going vessels; SOLAS regulated commercial cargo or passenger ships; offshore oil and gas rigs; offshore wind farms 5. SOLAS APPROVED RETRO-REFLECTIVE TAPE To enhance visibility and aid location of wearer.

SOLAS ANTI-EXPOSURE SUITS USED BY: Rescue boat and marine evacuation system crews

SMART SOLAS RANGE

2. FULLY WATERPROOF All outer fabrics are waterproof according to the standard EN 343. Immersion suits are taped with the most advanced seam technology ensuring maximum waterproofness.

FLOATATION GARMENTS

SMART SOLAS RANGE

STANDARD FEATURES ON OUR SOLAS IMMERSION SUITS

6. MARINE GRADE WHISTLE To aid location and rescue SMART SOLAS RANGE

3. THERMAL PROTECTION Fully tested and certified under SOLAS regulations to give either 1 hour or 6 hours thermal protection against cold water shock and hypothermia during water immersion.

SSS1A 1 piece Suit

THERMAL LINER 1 piece Suit

SSS2A 1 piece Suit

SMART DRY 1 piece Suit

SOLAS Immersion + Anti-Exposure suit

—

SOLAS Immersion + Anti-Exposure suit

SOLAS EN ISO 15027-1

154N

—

6 Hours

1 Hour

300D

SSS1A + Liner = 6 hours Closed cell foam + nylon

300D

Gore-Tex®

Semi Dry Suit

—

Semi Dry Suit

Breathable Dry Suit

International Flame

Size colour coded

International Flame

International Flame/ Black

1MG4

1MC6

1MG5

1MHW

Sizes

S-XL

XS-2XL

Page

pg 40

pg 41

pg 42

pg 43

Standard Actual Buoyancy level (Size L) Thermal protection

7. COMPATIBILITY All suits must be worn in conjunction with a compatible SOLAS / MED approved lifejacket.

Fabric Special features Colour Reference

outer fabric

closed cell foam lining

100N 1 Hour

1 hour

6 hour

thermal protection

Additional neoprene hood for extra thermal protection during water immersion Comfortable soft neoprene neck seal

SMART SOLAS SUIT 1A (SSS1A) SOLAS 2010

1MG4

BUOYANCY 100N

The Smart SOLAS Suit 1A is a semi-dry suit which provides optimum features and flexibility as a working suit combined with full approval as a SOLAS Immersion + AntiExposure Suit offering multifunctional use for any work or emergency abandonment situation..

SUPERIOR BENEFITS Provides a minimum of 1 hour of thermal protection against cold water shock and delays hypothermia upon immersion Can also be used as a working suit due to flexibility and comfort of design SOLAS approved retro-reflective tape to hood , shoulders, arms and back

5 fingered neoprene gloves stowed in arm pockets for working use and for thermal protection during water immersion Adjustable waist belt with heavy duty metal interlocking buckles Soft and flexible neoprene socks for flexibility to wear under standard work boots and give added thermal protection during water immersion Wide anti-flushing straps on arms and ankles to give added thermal protection during water immersion

OPTIONAL EXTRAS

SMART THERMAL FLOATATION LINER 1MC6

Possibility to increase thermal protection from 1 to 6 hours as well as increasing the buoyancy by combining with our thermal floatation liner 1MC6. The thermal floatation liners are colour coded for sizing (S= red, M= navy, L= orange, XL=navy).

This thermal floatation liner offers the flexibility to add to the Smart 1A Suit to increase the protection level to 6 hours, as and when needed.

SUPERIOR BENEFITS

Elasticated leg panels for snug fit and to increase thermal protection during water immersion Colour coded and sized storage bag with quick-rip touch and close opening panel to allow rapid donning in an emergency situation Compatible with Mullion SOLAS Hi-Rise 275N Lifejackets

Flexible lightweight floatation liner gives both added buoyancy and thermal protection Easy access centre front zip

1 hour

thermal protection

6 hour

thermal protection

Elastic thumb loops and foot stirrup straps to aid easy donning and security of fit under the Smart 1A Suit Colour coded for ease of matching sizes

Inner fixed neoprene wrist seals

KEY FEATURES KEY FEATURES

Provides additional buoyancy due to inherent flotation foam lining in excess of the SOLAS requirements of 70 Newton for an anti-exposure suit

Fully waterproof outer fabric + taped seams

Fixed insulated hood for constant wear working use

Sleeve pocket + marine grade whistle

Storm flap

SMART SOLAS RANGE

FLOATATION GARMENTS

EN ISO 12402-5

Double sided smooth nylon quilted to 5mm foam liner for ease of donning Heavy duty front zip Butted and taped seams for reduction of bulk

1 hour

6 hour

thermal protection

1 hour

thermal protection

6 hour

thermal protection

SMART SOLAS SUIT 2A (SSS2A) SOLAS 2010

1MG5

BUOYANCY 154N

The Smart SOLAS Suit 2A is a semi-dry suit and similar to the SSS 1A but has a higher buoyancy and thermal protection level (6 hours) provided by an additional foam insulation liner. Additional features to SMART SOLAS SUIT 1A: +

Provides a minimum of 6 hours of thermal protection against cold water shock and hypothermia upon immersion Double layer foam insulation lining

Higher buoyancy due to double foam layer

Thicker neoprene boots No fixed hood

SMART DRY SUIT SOLAS 2010

SMART SOLAS RANGE

FLOATATION GARMENTS

EN ISO 12402-5

1MHW ISO 15027-1

Our Smart Dry Suit 1MHW is a premium comfort dry suit designed especially for offshore and wind farm use. It provides optimum features, flexibility and breathability as a working suit combined with full approval as both a SOLAS and ISO immersion suit, offering multi-functional use for any work or emergency situation.

SUPERIOR BENEFITS Certified as a 1 hour thermal protection suit according to EN ISO 15027-1 and SOLAS 2010 Compatibility Tested according to HSE/Mensafe Offshore Protocol to be compatible with Mullion SOLAS Hi-Rise 275N + ISO 12402 Seaforce II Lifejackets.

Soft neoprene seals at neck and wrists for added comfort SOLAS approved retro-reflective tape on upper back, shoulders, arms, front and back legs

KEY FEATURES Waterproof outer fabric + taped seams 2 mesh pockets with zips on the legs

Complies with MCA Marine Guidance Notice No. 396 for Offshore use.

2 mesh pockets with zips on the sleeves containing neoprene gloves, buddy line and whistle

Ultra-light highly breathable 3-layer Gore-Tex速 dry suit (2,5kg - Size Large)

2 extra mesh pockets on the sleeves for PLB, pens, other accessories

Reinforcement panels added to knees and seat area

Neoprene hood stowed in pouch on back with grab strap for ease of donning

Easy access centre front soft waterproof zip

SPECIAL

PURPOSE PRODUCT

”

FLOATATION GARMENTS

IDEAL FOR SEARCH AND RESCUE SERVICES, EMERGENCY SERVICES, COAST GUARDS, MARINE PROTECTION AND SURVEILLANCE SERVICES.

Special Rescue Vest.

SINGLE CHAMBER

ACTUAL BUOYANCY 373N

EN ISO 12402

SUPERIOR BENEFITS • Has a unique highly asymmetric shaped bladder which gives optimum turning capacity when worn in combination with dry suits, waders, firefighters’ suits, heavy clothing or floatation garments.

SPECIAL PURPOSE PRODUCT

“

SEAFORCE VEST

• The stylized vest design optimizes the redistribution of trapped air in dry suits and/or heavy garments worn underneath to further enhance self-righting. • Double membrane technology used in the bladder gives superior damage protection against perforation and piercing. • Built-in supported spray hood of superior design for extra protection and comfort. • Enhanced safety features for operational readiness indication and service requirements give the wearer total assurance. • Multiple equipment pockets with flexible positioning possibilities to suit individual requirements. • Special quick release belt and grab strap system for ultimate protection against entrapment risks. • Detachable inflatable collar for ease of servicing and replacement. • ISO 12401 approved safety line / foot strop with heavy duty grapple release hooks + strain indicator incorporated in quick release safe storage pouch inside vest. • Adjustable double thigh straps for wearer comfort and security.

ISO 12402-5/6 EN ISO 12402-5 EN ISO 12402-2

SEAFORCE

SPECIAL PURPOSE PRODUCT

FLOATATION GARMENTS

SPRAYHOOD ISO 12402-8

1MN2

ISO12402 BUOYANCY 373N Asymmetric Single Chamber BUOYANCY: VEST: 77N + LIFEJACKET: 296N

KEY FEATURES VEST + LIFEJACKET COLLAR Zip fastening lifejacket cover High abrasion resistance waterproof fabric 3D Spacer comfort back neck Flexothane® elasticated side panels for comfort and multi-size fit Snag proof attachment system for inflatable lifejacket collar to vest Lifejacket pull toggle secured to vest to minimize snagging Double belts for extra security Push button buckle on lifejacket waist belt Quick release buckle on chest belt system with easy grab yellow pull toggle + metal O-ring on back for attachment of safety line (image 1) Quick release grab strap system on back concealed under Rescue flap on upper back Centre front vest fastening heavy duty zip + easy grip puller

BLADDER Black / silver rescue reflective tape on front and back shoulders + upper back

Nominal 275N buoyancy amorphic hinged design of asymmetric inflatable bladder

Inflation system operational readiness indicator window on right front

Hi-vis orange supported breathable spray hood to fit around bladder with easy stud quick release system

Service date information window on left front

Marine grade whistle

Concealed knife pocket on chest

Oral inflation tube

4 slot lash tabs on right and left chest for attachment of equipment/ lights

SOLAS approved light

Guardian Rescue domed clip on light (with dual function fixed beam or strobe options) (image 2)

Red recovery grab strap on bladder marked “LIFT”

Molle system around vest allows flexible fit of multiple equipment pockets

60g CO2 gas cylinder

1 Radio pocket + 1 combined PLB / flare pocket provided 3 D-rings at front hem for accessories attachment Nominal 50N inherent buoyancy foam inside vest with velcro opening panels to allow removal / replacement

SOLAS approved Retro-reflective tape Inflation system

FAIR WINDS AND FOLLOWING SEAS TO ALL WHO SAIL IN MULLION!

An inflatable lifejacket is a Personal Floatation Device (P.F.D.)* from which the buoyancy is obtained by means of an inflation system and a compressed CO2 gas cylinder. Mullion inflatable lifejackets are available in 2 levels of buoyancy: 150 newton or 275 newton.

CONSTRUCTION OF A LIFEJACKET: COVER

The cover gives optimum protection to the inflatable bladder and prolongs the life of the P.F.D. Mullion offers a wide range of covers: REGULAR, WIPE CLEAN, HIGH VISIBILITY, WELDERS AND FLAME RETARDANT ANTISTATIC.

INFLATABLE BLADDER

SINGLE-CHAMBER LIFEJACKET = buoyancy provided by 1 inflatable compartment (minimum required for EN/ISO). DOUBLE-CHAMBER LIFE JACKET = buoyancy provided by 2 inflatable compartments (minimum required for IMO/SOLAS). A double-chamber offers the extra security in case one chamber is damaged or fails, the other chamber is sufficient to support the wearer in water on its own.

INFLATION (MECHANISM)

The inflation system is required to activate and pierce the cylinder in order to release the gas inside the bladder and allow it to inflate. AUTOMATIC INFLATION SYSTEM: Inflation will automatically occur upon contact with water. Inflation will commence within 5 seconds. In the unlikely event of the automatic system failing the lifejacket can be activated by pulling the toggle as a manual override. MANUAL INFLATION SYSTEM: Inflation depends on the user manually activating the inflation system by means of the pull toggle.

CO2 GASCYLINDER

The inflation system when activated pierces the cylinder and the CO2 gas is released inside the bladder to allow inflation to the relevant buoyancy level. - 150 N lifejackets use: 33 gram or 38 gram - 275 N lifejackets use: 60 gram

LIFEJACKET

BEACON

SINGLEINFLATABLE INTRO CHAMBER BLADDER LIFE JACKETS EN ISO APPROVED

INFLATABLE LIFE JACKETS

A MULLION DOUBLE CHAMBER INFLATABLE LIFE JACKET* (*) All Mullion double chamber lifejackets are SOLAS approved

STANDARD FEATURES

STANDARD FEATURES:

1. MARINE GRADE WHISTLE

5. CRUTCH STRAP

A Marine grade EN ISO 12402 approved whistle is fitted to the lifejacket. This whistle can be used in immersion situations to alert rescue teams. The whistle is fitted in the optimum position for ease of access.

The crutch strap prevents the lifejacket from rising above the head and ensures a secure fit and optimum stability of the PFD in water.

6. INFLATION SYSTEM

2. SOLAS APPROVED RETRO-REFLECTIVE TAPE ON BLADDER When the bladder is inflated, the retro-reflective tapes increase the visibility of a man overboard to assist location and rescue. Required surface area for 150N: 300 cm² Required surface area for 275N: 400 cm²

The inflation system is required to activate and pierce the cylinder in order to release the gas inside the bladder and allow it to inflate. This is normally both automatic and manual. Manual only systems can be supplied for special purpose use.

7. BLADDER All bladders are constructed with air tight materials and seams. Standard colour is Spanish yellow to enhance wearer location and visibility in water.

3. ORAL INFALTION TUBE An oral tube is provided to allow inflation by mouth; top-up or deflation

4. RED RECOVERY GRAB STRAP MARKED “LIFT”

1. MARINE GRADE WHISTLE A Marine grade EN ISO 12402 approved whistle is fitted to the lifejacket. This whistle can be used in immersion situations to alert rescue teams. The whistle is fitted in the optimum position for ease of access.

2. AUTOMATIC WATER-ACTIVATED SOLAS LIGHT AND SOLAS APPROVED RETROREFLECTIVE TAPE ON BLADDER When the bladder is inflated, the retro reflective tape and the SOLAS light increase the visibility of a man overboard to assist location and recue. The SOLAS approved rescue light which is automatically activated is positioned on the bladder for optimal visibility and rescue. Required surface area for 150N: 400 cm² Required surface area for 275N: 400 cm²

The recovery grab strap facilitates manual recovery of a person from the water during rescue operations.

5. TWO AUTO INFLATION SYSTEMS (DOUBLE CHAMBER) WITH MANUAL OVER-RIDE A SOLAS approved lifejacket has two chambers, each of which has an automatic inflation system which will activate on immersion in water. The manual over-ride can activate the inflation systems by pulling the toggles firmly, in the unlikely event that the automatic system fails. This way a pin will pierce the CO2 cylinder which will inflate the bladder.

6. SECURE RETAINERS (STEEL D-RING, CRUTCH STRAP, BUDDY LINE)

3. OVERPRESSURE (OP) TUBE + ORAL INFLATION TUBE

The recovery grab strap facilitates manual recovery of a person from the water during rescue operations.

4. RED RECOVERY GRAB STRAP ON BLADDER MARKED “LIFT”

The overpressure tube relieves pressure on one of the chambers when both chambers are automatically inflated simultaneously. The oral tubes canb also be used for inflation by mouth; top-up or deflation.

A safety line can be attached to the steel D-ring, attached to the centre front buckle, to prevent the wearer from falling overboard. The crutch strap prevents the lifejacket from rising above the head and ensures a secure fit and optimum stability of the PFD in water. A buddy line can be used to attach multiple persons in water together. The high-visibility orange buddy line is stowed on the front edge of the bladder.

DOUBLE CHAMBER BLADDER

SINGLE CHAMBER BLADDER

FRONT CHAMBER

+ LAYER

INFLATION SYSTEM

SINGLE CHAMBER VS BLADDER DOUBLE ENCHAMBER ISO APPROVED

A MULLION SINGLE CHAMBER INFLATABLE LIFE JACKET

INFLATION SYSTEM

BACK CHAMBER

INFLATION SYSTEM

COMPACT 150

Standard

STREAM 150

HI-TIDE 150

CRUISER 150

NEPTUNE 150

SEAFORCE II 275

MARINER 275

HI-RISE 150

REGULAR

WIPE CLEAN

HEAVY DUTY WIPE CLEAN

LOCATOR

REGULAR

WIPE CLEAN

LOCATOR

REGULAR

WIPE CLEAN

WELDERS

FR AST

HI-VIS FR AST

REGULAR

WIPE CLEAN

Heavy Duty

WELDERS

FR AST

HI-VIS FR AST

EN ISO 12402-3

EN ISO 12402-3 EN ISO 12402-6 EN ISO 12401

EN ISO 12402-3 EN ISO 12401

EN ISO 12402-3

EN ISO 12402-3 EN ISO 12402-6

EN 396

EN 396 EN 1149-5 EN ISO 14116

EN ISO 12402-2

EN 399

EN 399 EN 1149-5 EN ISO 14116

Actual Buoyancy level

172 N

170 N

157 N

160 N

208 N

296N

PA-450D

PES-300D + anti-static fibre

PA-1000D

PA-450D

PANOTEX速

PES-300D + anti-static fibre

Yes

1 x 38gram

1 x 33gram

1 x 60gram

Reinforced

Extra reinforced + Comfort Neck

Extra reinforced + Comfort Neck + Safelink Solo Plb + Deck Safety Harness

Deck Safety Harness + Asymmetric bladder

Reinforced

+ DIVANSI PLB

Reinforced

Flame retardant

Flame retardant Anit-Static

Hi-Vis Flame retardant Anit-Static

Asymmitric bladder + Optimum turning capacity

Reinforced

Red Navy Olive green

Red/Orange

Red

Red Navy

Red

Red/Orange

Hi-Vis Yellow/ Navy

Red

Red/Orange

Silver

Royal Blue

Hi-Vis Yellow Hi-Vis Orange

Navy

Red

Reference

3MV1

3MV7

3MVE

3MVL

3MVH

3MV4

3MVB

3MVF

1MV6

1MV8

1MY4

1MYD

1MUI

1MUE

3MV9

Page

pg 56

pg 57

pg 58

pg 62

pg 63

pg 65

pg 68

pg 69

pg 70

pg 71

pg 80

PA-1000D

Metal interlock buckles

Yes

Quick release plastic buckles

Yes

D-ring

1 x 38gram

CO2 gas cylinder

Special features

Colour

(*) PA: Polyamide / PES: Polyester / D: Denier

REGULAR

WIPE CLEAN

REGULAR + SPRAYHOOD

REGULAR

WIPE CLEAN

HARNESS

SOS LOCATOR

REGULAR + SPRAYHOOD

+SPRAYHOOD

SOLAS EN ISO 12402-3

SOLAS EN ISO 12402-3 EN ISO 12402-8

SOLAS EN ISO 12402-2

SOLAS EN ISO 12402-2 EN ISO 12402-6

SOLAS EN ISO 12402-2 EN ISO 12402-8

ctual Buoyancy level

324 N

PA-450D

Cover fabric *

Standard

Cover fabric

HI-RISE 275

180N

WIPE CLEAN

320N

PA-450D

Metal interlock buckles

Yes

Quick release buckles

Yes

D-ring

Yes

1 x 60gram

2 x 38 gram

2 x 60 gram

2 x 38 gram

2 x 60 gram

Reinforced

Flame retardant

Flame retardant Anit-Static

Hi-Vis Flame retardant Anit-Static

Reinforced

Sprayhood

Reinforced

+ attachment loops for Fall Arrest Harness

Reinforced + Seamarshall AU9 Beacon

Sprayhood

Reinforced + Sprayhood

Red/Orange

Hi-Vis Yellow

Silver

Royal Blue

Hi-Vis Yellow Hi-Vis Orange

Red/Black Navy/Black

Red/Orange

Red/Black Navy/Black

Red/Orange

Red/Black Navy/Black

Red

Red/Black Navy/Black

Red/Orange

1MU4

1MU9

1MXH

1MYG

1MUJ

1MUF

Reference

2MSF

2MSG

2MSF

2MS1

2MS2

2MT2

2MT1

2MS1

2MS2

pg 74

pg 75

pg 76

pg 77

Page

pg 84

pg 85

pg 86

pg 87

pg 88

pg 89

CO2 gas cylinder

Special features

Colour

The Smallest Lifejacket in the World! ACTUAL BUOYANCY 172N

SINGLE CHAMBER

EN ISO 12402

SUPERIOR BENEFITS

“

THE PREFERRED CHOICE OF FISHERMEN AND PROFESSIONAL USERS WHERE MINIMUM SIZE AND WEIGHT COMBINED WITH MAXIMUM PERFORMANCE IS FAVOURED

”

• The unique design fits high on the chest to afford maximum working flexibility with minimal snagging hazards. • All snag hazards are removed to ensure safe working practice. • It uses latest Quick Burst Zip technology for fast deployment in water. • Optimum safety features for operational readiness indication and service requirements give the wearer total assurance. • Highly abrasion resistant and durable materials are used to give extended life in harsh working environments.

SINGLE CHAMBER BLADDER EN ISO APPROVED

REGISTERED TRADEMARK

150N BUOYANCY PROTECTION

COMPACT® 150

The Mullion Compact® 150N CE/ISO range exists of 4 types of lifejackets each with a specific feature based on different working conditions.

Compact® REGULAR

Compact® WIPE CLEAN

Compact® HEAVY DUTY WIPE CLEAN

Compact® LOCATOR

COMPACT® 150 REGULAR EN ISO 12402

BUOYANCY: 172N

3MV1

EN ISO 12402

Single Chamber

The Compact® 150 Mark II is ideal for general heavy use professional and commercial applications due to its high abrasion resistance outer cover.

KEY FEATURES OUTER COVER High abrasion resistance fabric Quick burst zip fastening cover

3MV7

Inflation system operational readiness indicator window on the back Service date information window on the back

BLADDER Marine grade whistle Oral inflation tube SOLAS approved retro-reflective tape on bladder Red recovery grab strap on bladder marked “LIFT” Inflation system 38g CO2 gas cylinder Options on special request: ISO 12401 Deck Safety Harness model

ISO 12401

COMPACT® 150 HEAVY DUTY WIPE CLEAN 3MVE

BUOYANCY: 172N Single Chamber

EN ISO 12402

BUOYANCY: 172N Single Chamber

COMPACT® LOCATOR

3MVL

EN ISO 12402 / 12401 BUOYANCY: 172N Single Chamber

SUPERIOR BENEFITS

The Compact® 150 PVC Mark II is ideal for commercial fishing applications and construction workers.

The Compact® 150 Heavy Duty Wipe clean Mark III is ideal for heavy commercial fishing applications especially for potters, crabbers, lobster fishermen and also suitable for construction workers.

The Compact® 150 Locator is integrated with the Kannad Safelink SOLO Personal Locator Beacon. To improve comfort the Compact® Locator has a comfort collar padding to the back of the neck.

Additional features to COMPACT® 150 REGULAR:

Additional features to COMPACT® 150 REGULAR: +

Durable wipe clean PVC reinforcement

Quick release buckle Crutch strap

ISO 12402-3/6 ISO 12402-3

ISO 12402-3

COMPACT® 150 WIPE CLEAN

SINGLE CHAMBER BLADDER EN ISO APPROVED

ISO 12402-3

IDEAL FOR INDUSTRIAL USE WITH FOUL WEATHER CLOTHING

Durable wipe clean PVC reinforcement

Reinforced with additional high abrasion resistance ‘Armortex®’ fabric around the sides and lower edges of the cover to prevent damage

To increase comfort and avoid irritation to the neck there is a comfort collar padding to the back of the neck

Integrated deck safety harness approved to EN ISO 12401

The Compact is also available with D-Ring + metal buckles for safety line attachment approved to ISO 12401 as an integrated Deck Safety Harness specification. Options on special request: ISO 12401 Deck Safety Harness model

150N BUOYANCY PROTECTION

ISO 12402-3

SINGLE CHAMBER BLADDER EN ISO APPROVED

STREAM 150

EN ISO 12402-3 EN ISO 12401

Constant Wear, All-weather Lifejacket. ACTUAL BUOYANCY 170N

EN ISO 12402

STREAM

150N BUOYANCY PROTECTION

SINGLE CHAMBER

3MVH

EN ISO 12402 / 12401 BUOYANCY: 170N Asymmetric Single Chamber

The Stream 150N lifejacket is a constant wear, all-weather lifejacket for general use with foul weather clothing. The Stream 150N is a standard horseshoe design with a touch and close fastening cover and a single back strap.

SUPERIOR BENEFITS The lifejacket has an asymmetric shaped bladder which gives optimum turning capacity. OUTER COVER Durable waterproof fabric Touch and close fastening cover Adjustable waist belt Stainless steel interlocking belt buckles Stainless steel front D-ring on belt Crutch strap Service date information tag on the belt

EN ISO 12401 approved deck harness

BLADDER Marine grade whistle Oral inflation tube Retro-reflective tape on bladder Red recovery grab strap on bladder marked “LIFT” Inflation system 33 g CO2 gas cylinder

STREAM RECHARGE KIT ref. 2MZM

SINGLE CHAMBER

ACTUAL BUOYANCY 157N

EN ISO 12402

The Hi-Tide 150 lifejacket is a constant wear, all-weather lifejacket for general use with foul weather clothing.

“

The Hi-Tide 150N range is available in 3 variations appropriate to different end uses.

THE PREFERRED CHOICE OF FISHERMEN AND PROFESSIONAL USERS WHERE MINIMUM SIZE AND WEIGHT COMBINED WITH MAXIMUM PERFORMANCE IS FAVOURED

”

Hi-Tide REGULAR

Hi-Tide WIPE CLEAN

SINGLE CHAMBER BLADDER EN ISO APPROVED

Standard Horseshoe Style.

150N BUOYANCY PROTECTION

HI-TIDE 150

Hi-Tide LOCATOR

HI-TIDE 150 REGULAR EN ISO 12402

BUOYANCY: 175N

3MV4

ISO 12402-3

HI-TIDE 150 WIPE CLEAN EN ISO 12402

Single Chamber

SINGLE CHAMBER LIFEJACKET 150N EN BLADDER ISO APPROVED EN ISO APPROVED

ISO 12402-3

3MVB

HI-TIDE 150 LOCATOR

BUOYANCY: 175N Single Chamber

EN ISO 12402

3MVF

BUOYANCY: 175N Single Chamber

KEY FEATURES

SUPERIOR BENEFITS

OUTER COVER

The Hi-Tide 150 Wipe Clean PVC reinforced version is ideal for heavy duty industrial use.

The Hi-Tide 150 Locator is integrated with the Divansi® Personal Locator Beacon. It is available in hi-vis yellow with retro reflective striping on the front and back to improve visibility To improve comfort the Hi-Tide Locator has a detachable fleece at the back of the neck

Durable waterproof fabric Zip fastening closure Adjustable waist belt Stainless steel interlocking belt buckles Stainless steel D-ring on belt Crutch strap

BLADDER Marine grade whistle Oral inflation tube SOLAS approved retro-reflective tape Red recovery grab strap marked “LIFT” Inflation system

Additional features to HI-TIDE 150 REGULAR: +

Durable wipe clean PVC reinforcement

150N BUOYANCY PROTECTION

ISO 12402-3

Additional features to HI-TIDE 150 REGULAR: +

Durable wipe clean PVC reinforcement

Inflation system operational readiness indicator window and service date information window

Quick release buckle

Bladder is designed for harsh working conditions: it has an additional double layer membrane for superior damage limitation and enhanced integrity to increase working life

Detachable fleece at the back of the neck

33g CO2 gas cylinder

SINGLE CHAMBER BLADDER EN APPROVED

EN 396

Slimfit and Lightweight Lifejacket Ideal for Leisure Use. SINGLE CHAMBER

ACTUAL BUOYANCY 180N

EN 396

CRUISER 150 EN 396

1MV6 BUOYANCY: 160N

Single Chamber

The Cruiser has a flat slim-line design with touch and close fastening cover and the bladder permanently attached to the cover. This lifejacket features toggles to fit onto a sailing jacket.

150N BUOYANCY PROTECTION

CRUISER 150

KEY FEATURES OUTER COVER Durable waterproof fabric Touch and close fastening cover Toggles to fit to sailing jacket Adjustable waist belt Quick release buckle Crutch strap

BLADDER Marine grade whistle Oral inflation tube SOLAS approved retro-reflective tape on bladder Red recovery grab strap on bladder marked “LIFT” 33g CO2 gas cylinder

ACTUAL BUOYANCY 208N

SINGLE CHAMBER

EN 396

The Neptune 150N lifejacket is a constant wear, all-weather lifejacket for general use with foul weather clothing.

“

The Neptune 150N CE range is available in 5 variations appropriate to different end uses.

IDEAL FOR GENERAL USE WITH FOUL WEATHER CLOTHING

”

Neptune REGULAR

Neptune WIPE CLEAN

SINGLE CHAMBER BLADDER EN APPROVED

Standard Horseshoe Style.

150N BUOYANCY PROTECTION

NEPTUNE 150

Neptune WELDERS

Neptune FR AST

Neptune HI-VIS FR AST

NEPTUNE 150 REGULAR EN 396

1MV8

The Neptune 150 is a standard horseshoe design with a zip closure cover and a single back strap for general utility use.

KEY FEATURES

EN 396

NEPTUNE 150 WIPE CLEAN EN 396

BUOYANCY: 208N Single Chamber

Zip fastening cover Adjustable waist belt Stainless steel interlocking belt buckles Stainless steel D-ring on belt Crutch strap

BLADDER Marine grade whistle Oral inflation tube SOLAS approved retro-reflective tape Red recovery grab on bladder strap marked “LIFT” Inflation system 33g CO2 gas cylinder

1MY4

NEPTUNE 150 WELDERS

BUOYANCY: 208N Single Chamber

EN 396

1MYD

BUOYANCY: 208N Single Chamber

SUPERIOR BENEFITS

The Neptune 150 Wipe Clean PVC reinforced version is ideal for heavy duty industrial use.

The Neptune 150 Welders lifejacket is ideal for use by workers conducting welding activities in marine environments. This Lifejacket is light weight and comfortable with a tough Panotex® aluminized cover protecting it from molten metal splashes and sparks. This lifejacket has a FR touch and close fastening cover.

OUTER COVER Durable waterproof fabric

SINGLE CHAMBER BLADDER EN APPROVED

EN 396

Additional features to NEPTUNE 150 REGULAR: +

Durable wipe clean PVC reinforcement.

150N BUOYANCY PROTECTION

EN 396

Additional features to NEPTUNE 150 REGULAR: +

FR Touch and close fastening cover instead of zip fastening cover

Durable aluminized Panotex® silver wipe clean cover

EN407 : EN367 Convective Heat Level 2 EN407 : ISO6942 Radiant Heat Level 4 EN407 : EN348 Small splashes of Molten metal L3 EN407 : EN373 Large Quantity of Molten Iron L4 ISO11612:ISO9151 Convective Heat Level B1 ISO11612:ISO6942 Radiant Heat Level C4 ISO11612:ISO9185 Molten Aluminium Level D3 ISO11612:ISO9185 Molten Iron Level E3 ISO11612:ISO15025 Limited Flame Spread Pass A1 ISO14116:ISO15025 Limited Flame Spread Index 3 ISO11611:ISO9150 Impact of Molten metal drops Class 2 EN469 : ISO6530 Penetration by Liquid chemicals BS EN 1149-5: BS EN 1149-1

Optional extras: Navy FR over cover for anti-glare and anti-reflection

EN 396

Index 1

NEPTUNE 150 FR AST EN 396

1MUI

SUPERIOR BENEFITS Ideal for use on oil refineries, petrochemical sites, oil tankers, granary production and processing sites, grain silos and grain barges. The Neptune 150 Flame Retardant Antistatic is ideal for use by workers in areas where there is risk of fire or explosion caused by static, sparks or combustible materials. This lifejacket is light weight and comfortable while giving optimum protection to wearers in such ATEX environments. It has been specifically designed to be compatible to wear with a full FR AST protective coat from our in-house range – the Sioen Duffel style. This ensures that the FR AST properties of the coat are not compromised by the use of a lifejacket over the top. The positioning of the retro-reflective tape also ensures non-interruption of the corresponding reflective tape on the coat as it blends in with it to give full conformity in the combination of wear.

EN 1149-5: 2008

Index 1

NEPTUNE 150 HI-VIS FR AST

BUOYANCY: 208N Single Chamber

EN 396 Additional features to NEPTUNE 150 REGULAR: +

Outer cover in FR AST fabric

All straps and belt in FR AST webbing

All metal buckles in FR AST quality

FR AST protective covers over zip pullers

Horizontal chest reflective tape bands on cover positioned to blend with equivalent FR AST protective coat –style 3074

Bladder in FR fabric

SINGLE CHAMBER BLADDER EN APPROVED

EN 396

EN ISO 14116: 2008

EN 1149-5: 2008

1MUE

BUOYANCY: 208N Single Chamber

SUPERIOR BENEFITS Ideal for use on oil refineries, petrochemical sites, oil tankers, granary production and processing sites, grain silos and grain barges.

150N BUOYANCY PROTECTION

EN ISO 14116: 2008

The Neptune 150 hi-vis Flame Retardant Antistatic lifejacket has the same features as the Neptune 150 FR AST and offers the wearer extra visibility when worn. It has been specifically designed to be compatible to wear with a full FR AST protective coat from our in-house range – the Sioen Duffel style. This ensures that the FR AST properties of the coat are not compromised by the use of a lifejacket over the top. The positioning of the retro-reflective tape also ensures non-interruption of the hi-visibility EN 471 requirement of the coat as it blends in with it to give full conformity in the combination of wear. Additional features to NEPTUNE 150 FR AST: +

Hi-vis orange or yellow cover

Vertical chest and diagonal shoulder reflective tape bands on cover positioned to blend with equivalent FR AST coats – style 9464

“

SINGLE CHAMBER

IDEAL FOR ONSHORE AND OFFSHORE USE UNDER EXTREME CONDITIONS WITH SPECIAL PROTECTIVE CLOTHING AND OR HEAVY EQUIPMENT

”

ACTUAL BUOYANCY 324N

EN 399

The Mariner 275 lifejacket is a constant wear, all-weather lifejacket for onshore and offshore use with special protective clothing. The Mariner 275N CE range is available in 6 variations appropriate to different end uses.

Mariner REGULAR

Mariner WIPE CLEAN

SINGLE CHAMBER BLADDER EN APPROVED

Standard Horseshoe Style.

275 NEWTON BUOYANCY PROTECTION

MARINER 275

Mariner HEAVY DUTY

Mariner FR AST

Mariner HI-VIS FR AST

Mariner WELDERS

MARINER 275 REGULAR EN 399

BUOYANCY: 324N

1MU4

The Mariner 275 is a standard horseshoe design with a zip closure cover and a single back strap.

KEY FEATURES OUTER COVER Durable waterproof fabric Zip fastening cover Adjustable waist belt Stainless steel interlocking belt buckles Stainless steel D-ring on belt Crutch strap

BLADDER Marine grade whistle Oral inflation tube SOLAS approved retro-reflective tape on bladder Red recovery grab strap on bladder marked “LIFT” Inflation system 60gm CO2 gas cylinder

EN 399

MARINER 275 WIPE CLEAN EN 399

Single Chamber

SINGLE CHAMBER BLADDER EN APPROVED

EN 399

1MU9

MARINER 275 HEAVY DUTY

BUOYANCY: 324N Single Chamber

EN 399

1MXH

BUOYANCY: 324N Single Chamber

SUPERIOR BENEFITS

The Mariner 275 Wipe Clean PVC reinforced version is ideal for heavy duty industrial use with special protective clothing.

The Heavy Duty Mariner is ideal for construction, port and dock workers. It is suitable for use in environments where heavy abrasion, dirt, oil and grease may cause premature wear and damage to the bladder. It has a padded back neck and double shoulder straps for comfort and reduction of weight on the back neck area. The high visibility yellow cover with SOLAS retro-reflective tape gives enhanced safety in high activity areas.

Additional features to MARINER 275 REGULAR: +

Durable wipe clean PVC reinforcement

Additional features to MARINER 275 REGULAR: +

Durable hi-vis yellow wipe clean PVC reinforcement

Padded back neck and offset double shoulder straps for comfort and reduction of weight to the back neck

SOLAS retro-reflective tape on front cover

275 NEWTON BUOYANCY PROTECTION

EN 399

MARINER 275 FR AST EN 399

1MUJ

SUPERIOR BENEFITS The Mariner 275 Flame Retardant Antistatic is ideal for use by workers in areas where there is risk of fire or explosion caused by static, sparks or combustible materials. This lifejacket is light weight and comfortable while giving optimum protection to wearers in such ATEX environments. It has been specifically designed to be compatible to wear with a full FR AST protective coat from our in-house range – the Sioen Duffel style. This ensures that the FR AST properties of the coat are not compromised by the use of a lifejacket over the top. The positioning of the retro-reflective tape also ensures non-interruption of the corresponding reflective tape on the coat as it blends in with it to give full conformity in the combination of wear.

EN 1149-5: 2008

EN 399

Index 1

MARINER 275 HI-VIS FR AST

BUOYANCY: 324N Single Chamber

EN 399 Additional features to MARINER 275 REGULAR: +

Outer cover in FR AST fabric

All straps and belt in FR AST webbing

All metal buckles in FR AST quality

FR AST protective covers over zip pullers

Horizontal chest reflective tape bands on cover positioned to blend with equivalent FR AST protective coat –style 3074

Bladder in FR fabric

SINGLE CHAMBER BLADDER EN APPROVED

EN ISO 14116: 2008

EN 1149-5: 2008

Index 1

1MUF

MARINER 275 WELDERS

BUOYANCY: 324N Single Chamber

EN 399

1MYG

BUOYANCY: 324N Single Chamber

SUPERIOR BENEFITS

The Mariner 275 hi-vis Flame Retardant Antistatic lifejacket has the same features as the Mariner 275 FR AST and offers the wearer extra visibility when worn.

The Mariner 275 Welders lifejacket is ideal for use by workers conducting welding activities in marine environments. This Lifejacket is light weight and comfortable with a tough Panotex® aluminized cover protecting it from molten metal splashes and sparks. This lifejacket has a touch and close fastening cover.

It has been specifically designed to be compatible to wear with a full FR AST protective coat from our in-house range – the Sioen Duffel style. This ensures that the FR AST properties of the coat are not compromised by the use of a lifejacket over the top. The positioning of the retro-reflective tape also ensures non-interruption of the hi-visibility EN 471 requirement of the coat as it blends in with it to give full conformity in the combination of wear. Additional features to MARINER 275 FR AST: +

Hi-vis orange or yellow cover

Vertical Chest and diagonal shoulder reflective tape bands on cover positioned to blend with equivalent FR AST coats – style 9464

275 NEWTON BUOYANCY PROTECTION

EN ISO 14116: 2008

EN 399

Additional features to MARINER 275 REGULAR: +

Touch and close fastening cover instead of zip fastening cover

Durable aluminized Panotex® silver wipe clean cover

Optional extras: Navy FR over cover for anti-glare and anti-reflection

(*) Protected Design Registration No. DM/080105

Design Registered as a Unique Asymmetric Shaped Bladder Offering Optimum Turning Capacity.

SINGLE CHAMBER

ACTUAL BUOYANCY 296N

EN ISO 12402

Specifically designed for people working in extreme conditions and for special purpose operations where the risk of falling into water is high.

“

SUPERIOR BENEFITS

IDEAL FOR POLICE, GOVERNMENT AUTHORITIES, CUSTOMS, PILOTS AND RIB OPERATORS

”

• Has a unique highly asymmetric shaped bladder which gives optimum turning capacity when worn in combination with dry suits, waders, firefighters’ suits, heavy clothing or floatation garments. • The stylized vest design with cross over back and panel optimizes the redistribution of trapped air in dry suits and/or heavy garments worn underneath the lifejacket to further enhance self-righting. • Double membrane technology used in the bladder gives superior damage protection against perforation and piercing. • Enhanced safety features for operational readiness indication and service requirements give the wearer total assurance.

SINGLE CHAMBER BLADDER EN ISO APPROVED SINGEL

275N BUOYANCY PROTECTION

SEAFORCE II 275 *

SINGLE CHAMBER BLADDER EN ISO APPROVED

FEATURES OF THE SEAFORCE II

EN ISO 12402-2

SEAFORCE II EN ISO 12402-2

3MV9 BUOYANCY: 296N

Single Chamber

KEY FEATURES 3

OUTER COVER Zip fastening lifejacket cover

High abrasion resistance waterproof fabric

9 6

Extended fabric back for enhanced comfort

Offset shoulder back straps for added comfort and reduction of weight on neck

275N BUOYANCY PROTECTION

2 5

Double belts for extra security Stainless steel interlocking belt buckles

Centre front vest fastening heavy duty zip + easy grip puller White Mullion reflective tape on front shoulders Inflation system operational readiness indicator window on right front Service date information window on left front Crutch strap

BLADDER Double membrane technology to give superior damage protection against perforation and piercing Marine grade whistle

1. High abrasion resistance outer cover in vest style with extended back panel for support 2. Offset double shoulder straps for enhanced comfort 3. Centre front vest fastening heavy duty zip + easy grip puller extension 4. Zip closure lifejacket cover 5. Reflective tape on front cover

Oral inflation tube

6. Marine grade stainless steel buckles

SOLAS approved Retro-reflective tape

7. Crutch strap

Red recovery grab strap on bladder marked “LIFT” Inflation system

8. Inflation system operational readiness indicator window on right front

60g CO2 gas cylinder

9. Service date information window on left front

DOUBBLE CHAMBER BLADDER SOLAS + EN ISO APPROVED FLOATATION GARMENTS

HI-RISE 150 + 275 N SOLAS LIFEJACKETS

State of the Art SOLAS Inflatable Lifejackets. EN ISO 12402

SOLAS

150N + 275N BUOYANCY PROTECTION

DOUBLE CHAMBER

SUPERIOR BENEFITS

“

• These lifejackets are dual approved to latest SOLAS 2010 regulations and EN ISO 12402. • Designed to combine optimum safety and comfort. • Stylized horseshoe design with offset shoulder straps to alleviate weight and pressure stress on neck and shoulders. • The bladder has a unique hinged head pillow for optimal comfort and head support in water. • The shape of the bladder is tailored to the contours of the wearer to create a snug secure fit whilst giving supreme in-water performance.

IDEAL FOR OFFSHORE EXTREME USE WITH FOUL WEATHER CLOTHING AND EQUIPMENT

”

The Hi-Rise range is available in 9 variations appropriate to different end uses.

83 HI-RISE 150 REGULAR

HI-RISE 275 REGULAR

HI-RISE 275 WIPE CLEAN

HI-RISE 150 WIPE CLEAN

HI-RISE 275 FALL ARREST HARNESS

HI-RISE 150 REGULAR + SPRAYHOOD

SOS HI-RISE 275

HI-RISE 275 REGULAR + SPRAYHOOD

HI-RISE 275 WIPE CLEAN + SPRAYHOOD

HI-RISE 150 REGULAR* EN 12402 + SOLAS

2MSF

HI-RISE 150 WIPE CLEAN*

BUOYANCY: 180N Double Chamber

DOUBBLE CHAMBER BLADDER SOLAS + EN ISO APPROVED

ISO 12402-3

2MSG

ISO 12402 + SOLAS BUOYANCY: 180N Double Chamber

HI-RISE 150 + SPRAYHOOD

2MSQ

ISO 12402 + SOLAS BUOYANCY: 180N Double Chamber

(*) Approvals: SOLAS 2010 (according to MSC. 81(70); MSC. 200(80); MSC.207 (81); MSC.226(82)) + EN ISO 12402-3

KEY FEATURES

SUPERIOR BENEFITS

The HI-Rise 150 is a stylized horseshoe design with a zip closure cover and a double back strap for general offshore use.

This Hi-Rise 150 Wipe clean PVC reinforced version is ideal for heavy duty industrial use.

The Hi-Rise 150 SOLAS lifejacket is also available with the addition of a Sprayhood. The sprayhood gives optimum protection to face and mouth by protecting airways from water ingress and spray. Face window panel incorporates breath holes to prevent asphyxiation.

OUTER COVER

BLADDER

Durable waterproof fabric

Buddy line

Zip fastening cover

Automatic water-activated SOLAS light with manual switch option also

Reflective silver piping on the front Adjustable waist belt Stainless steel interlocking belt buckles Stainless steel D-ring on belt Crutch strap

Marine grade whistle Oral inflation tube Over pressure oral tube + relief valve on front chamber for manual inflation and deflation and also to relieve any excess pressure if both chambers are fired simultaneously SOLAS approved retro-reflective tape Red recovery grab strap marked “LIFT” Inflation systems 2 x 38g CO2 gas cylinders

Additional features to HI-RISE 150 REGULAR: +

Durable wipe clean PVC reinforcement

THE HI-RISE 150 SOLAS LIFEJACKET IS IDEAL FOR OFFSHORE USE WITH FOUL WEATHER CLOTHING.

150N + 275N BUOYANCY PROTECTION

ISO 12402-3

AVAILABLE IN STANDARD VERSION 2MSQ

HI-RISE 275 REGULAR* EN 12402 + SOLAS

2MS1

HI-RISE 275 WIPE CLEAN*

BUOYANCY: 320N Double Chamber

EN 12402 + SOLAS

DOUBBLE CHAMBER BLADDER SOLAS + EN ISO APPROVED FLOATATION GARMENTS

EN ISO 12402-2

2MS2

BUOYANCY: 320N Double Chamber

HI-RISE 275 + FALL ARREST HARNESS* 2MT2 EN 12402 + SOLAS

BUOYANCY: 320N Double Chamber

(*) Approvals: SOLAS 2010 (according to MSC. 81(70); MSC. 200(80); MSC.207 (81); MSC.226(82)) + EN ISO 12402-2

KEY FEATURES

SUPERIOR BENEFITS

The HI-Rise 275 is a stylized horseshoe design with a zip closure cover and a double back strap for extreme offshore use.

This Hi-Rise 275 Wipe clean PVC reinforced version is ideal for heavy duty industrial use.

The Hi-Rise 275 SOLAS lifejacket is also available with the addition of a fall arrest harness. The lifejacket has an attachment system, which can easily be fitted to most fall arrest harnesses.

OUTER COVER

BLADDER

Durable waterproof fabric

Buddy line

Zip fastening cover

Automatic water-activated SOLAS light with manual switch option also

Reflective silver piping on the front Adjustable waist belt Stainless steel interlocking belt buckles Stainless steel D-ring on belt Crutch strap

Additional features to HI-RISE 275 REGULAR: +

Durable wipe clean PVC reinforcement

Marine grade whistle Oral inflation tube Over pressure tube + relief valve on front chamber for manual inflation and deflation and also to relieve any excess pressure if both chambers are fired simultaneously SOLAS approved retro-reflective tape Inflation systems 2 x 60g CO2 gas cylinders

THE HI-RISE 275 SOLAS LIFEJACKET IS IDEAL FOR EXTREME OFFSHORE USE

• Standard fall arrest harness options available • Other models of fall arrest harness can be considered on request. Additional features to HI-RISE 275 REGULAR: +

Attachment system on the cover to fit a fall arrest harness

150N + 275N BUOYANCY PROTECTION

EN ISO 12402-2

DOUBBLE CHAMBER BLADDER SOLAS + EN ISO APPROVED FLOATATION GARMENTS

EN ISO 12402-2

SOS HI-RISE 275* EN 12402 + SOLAS

BUOYANCY: 320N

2MT1 Double Chamber

(*) Approvals: SOLAS 2010 (according to MSC. 81(70); MSC. 200(80); MSC.207 (81); MSC.226(82)) + EN ISO 12402-2

SUPERIOR BENEFITS The SOS Hi-Rise 275 is a lifejacket specifically designed to integrate a Personal Locator Beacon (PLB). This lifejacket is compatible with any Sea Marshall AU9 model. THE ULTIMATE IN SAFETY FOR LOCATION AND RESCUE!

Additional features to HI-RISE 275 REGULAR: +

Durable wipe clean PVC reinforcement

Black/silver chequered retro-reflective tape on the upper chest

2 inflation systems operational readiness indicator windows on the front

Beacon activation indicator window

Service date information window on the front

Additional foam and double fabric padding layer to protect the beacon inside the cover

Elastic housing for beacon on the inside of the cover

Antenna guidance loops on the bladder for beacon signal effectiveness

Snag proof press-stud security system for zip closures

For more information refer to special purpose products

EN ISO 12402-2

HI-RISE 275 + SPRAYHOOD EN 12402 + SOLAS

2MS9

BUOYANCY: 320N Double Chamber

(*) Approvals: SOLAS 2010 (according to MSC. 81(70); MSC. 200(80); MSC.207 (81); MSC.226(82)) + EN ISO 12402-2

HI-RISE 275 WIPE CLEAN + SPRAYHOOD 2MTD EN 12402 + SOLAS

BUOYANCY: 320N Double Chamber

(*) Approvals: SOLAS 2010 (according to MSC. 81(70); MSC. 200(80); MSC.207 (81); MSC.226(82)) + EN ISO 12402-2

The Hi-Rise 275 SOLAS lifejacket is also available with the addition of a Sprayhood. The sprayhood gives optimum protection to face and mouth by protecting airways from water ingress and spray. Face window panel incorporates breath holes to prevent asphyxiation.

AVAILABLE IN STANDARD VERSION 2MS9

150N + 275N BUOYANCY PROTECTION

EN ISO 12402-2

AVAILABLE IN PVC VERSION 2MTD

• Lifejackets specifically designed to integrate a Personal Locator Beacon (PLB). • Ultimate safety and rescue option. • Mullion can equip your lifejacket with a Beacon and/or supply the actual beacon.

PLB

KEY BENEFITS • A personal locator beacon provides additional rescue support as it can quickly locate and aid rescue in a man overboard situation. • Mullion has created and adjusted several lifejacket models to fit or integrate a beacon. Each beacon is integrated inside the cover in the best position to optimize its functional efficiency according to type of operation.

SMART LIFEJACKETS

• Combined PFD + PLB models are tested and approved as “special purposes products”.

BEACONS

PLB

Beacons are small devices used to alert vessels and search and rescue agencies of distress. Strictly they interface with receivers on ships and/or global emergency services via satellite systems. When manually or automatically activated upon immersion, these beacons send out a distress signal.

BEACON OPTIONS • Sea Marshall – AU9 beacon (Automatic water activated beacon) • Weatherdock Easy Rescue beacon (Automatic activated beacon) • Seareka Divansi beacon (Automatic when integrated in lifejacket) • Kannad Safelink SOLO Beacon (Manual activated beacon) • Kannad Safelink R10 Beacon (Automatic when integrated in lifejacket)

PLBs are Personal Locator Beacons which are small, personal emergency beacons that, when activated, give off a distress signal to aid swift location and rescue. Some types directly alert a special dedicated receiver on board the vessel; some can be operated through standard AIS (Automatic Identification System) Equipment already on the vessel. These types can be either manually or automatically activated. Other types send a signal via satellite directly to the Emergency Services. These types of PLB can only be manually activated. Mullion can offer a range of different types of PLB integrated with lifejackets to suit different areas of use and operation.

Supplier

Sea Marshall

Weatherdock

Seareka

Kannad/ McMurdo

Rhotheta

Type

AU9

Easy Rescue

Divansi

Safelink SOLO/ McMurdo Fastfind

Safelink R10/ McMurdo S20 Smartfind

RT - B77HELB

Frequency

121.5 MHz

AIS

869 MHz

406 MHz (distress frequency)

AIS channel 1 - 161.975 MHz, AIS channel 2 162.025 MHz

121.5 MHz

Receiver

Sea Marshall receiver on vessel

AIS receivers

Divansi receiver on vessel

International search and rescue services

AIS receivers

Rhotheta receiver on vessel

2. Weatherdock Easy Rescue beacon (Automatic activated beacon)

The Sea Marshall beacon will send a distress signal to a local receiver (vessel). The beacon will activate by means of full water immersion.

This beacon has a built in GPS and transmits a distress signal to all AIS receivers. When the lifejacket inflates in an emergency, a ripcord tears off a magnetic switch from the transmitter. This leads to an automatic activation of the AIS emergency beacon.

Hi-Rise 275N

SMART LIFEJACKETS

1. Sea Marshall â&#x20AC;&#x201C; AU9 beacon (Automatic water activated beacon)

Hi-Rise 275N

The Divansi beacon immediately sends an alert to a local receiver (vessel) if a MOB event occurs. The MOB can be followed by the receiver in real time thanks to the built-in GPS. The beacon will activate automatically by means of full inflation of the lifejacket.

4. Kannad Safelink SOLO Beacon/ McMurdo Fastfind (Manual activated beacon) This beacon works by transmitting an emergency signal via the 406 MHz distress frequency, which is monitored by the global COSPAS-SARSAT satellite system, alerting international search and rescue services to the emergency situation and the ID of the beacon user. The beacon must be activated by the wearer when the life jacket is inflated.

SMART LIFEJACKETS

3. Seareka Divansi beacon (Automatic when integrated in lifejacket)

Compact 150N

Hi-Tide 150N

Hi-Rise 275N

A unique emergency alert of a MOB is transmitted to all AIS (Automatic Identification System) receivers within a radius of 4 miles. The GPS location of the MOB will become viewable on the AIS receiver. The beacon will activate automatically by means of full inflation of the lifejacket.

INFLATION SYSTEMS AUTOMATIC INFLATION SYSTEMS Automatic inflation systems are activated by ingress of water. Upon immersion in water, a firing mechanism will activate and pierce a CO2 cylinder. The gas released from the cylinder will inflate the bladder of the lifejacket and create buoyancy. All automatic systems have an alternative manual override, which allows the user to pull the toggle and inflate the lifejacket if necessary.

1. HALKEY ROBERTS Alpha Auto

Compact 150N

The Alpha速 Auto Inflator activates when the cartridge comes into contact with water. The cartridge mechanism consists of a clear cap cartridge with water access apertures and a compressed high powered spring which is held by a cellulose salt bobbin. When the cellulose salt bobbin comes into contact with water the cellulose dissolves and it releases the spring which pushes a plunger forward, in turn forcing a cutter into the CO2 cylinder. The cutter allows the CO2 to travel through the one way valve in the inflator head and inflate the lifejacket.

INFLATION SYSTEMS

5. Kannad Safelink R10 Beacon McMurdo S20 Smartfind (Automatic when integrated in lifejacket)

The Automatic system is backed up by a manual override, which allows the user to pull the toggle and activate the cutter to pierce the gas cylinder in order to inflate the lifejacket alternatively.

2.UNITED MOULDERS LTD MK5 Auto Mariner 275N

The UML MK5 Automatic system activates when the cartridge comes into contact with water. The cartridge mechanism contains a compressed high powered spring which is held by a cellulose paper element. When the paper element comes into contact with water it dissolves and releases the spring which pushes a cutter forward to pierce the CO2 cylinder and release the CO2 gas. The gas then travels through the one way valve in the inflator head and inflates the lifejacket. The Automatic system is backed up by a manual override, which allows the user to pull the toggle and activate the cutter to pierce the gas cylinder in order to inflate the lifejacket alternatively.

Hi-Rise 275N

This system activates when the cartridge comes into contact with water. The cartridge mechanism contains a compressed high powered spring which is held by a cellulose paper element. When the paper element comes into contact with water it dissolves and releases the spring which pushes a cutter forward to pierce the CO2 cylinder and release the CO2 gas. The gas then travels through the one way valve in the inflator head and inflates the lifejacket. Benefits of the Dual Point indicator system: the user has immediate visual check of the operational status of the cylinder and cartridge. The Automatic system is backed up by a manual override, which allows the user to pull the toggle and activate the cutter to pierce the gas cylinder in order to inflate the lifejacket alternatively.

MANUAL INFLATION SYSTEMS Manual-only inflation systems are activated by the user by pulling on a toggle or handle. By pulling on the toggle or handle a lever system is released which will activate the cutter to pierce the CO2 cylinder and thereby release the gas into the lifejacket to achieve full inflation. There are three different options for manual inflation systems:

1.UNITED MOULDERS LTD MiniManual The UML Manual only system will not activate automatically and can only be activated by means of the pull toggle which breaks off the green clip when pulled correctly.

TECHNICALSYSTEMS INFLATION STANDARDS

3.UNITED MOULDERS LTD â&#x20AC;¨Pro Sensor Auto Dual Point Indicator

4. HAMMAR A1 / M1 Hydrostatic Auto This inflation mechanism requires both water and pressure combined to activate automatically. It requires full immersion in water to a minimum 10 cm depth to activate fully. At this point the hydrostatic valve opens and lets the water meet the water sensitive element that in turn releases a stainless steel coil spring. The spring then drives a cutter into the end of the gas cylinder to pierce it and release the gas through the sealing ring aperture in the bladder and inflate the lifejacket. The Automatic system is backed up by a manual override, which allows the user to pull the toggle and activate the cutter to pierce the gas cylinder in order to inflate the lifejacket alternatively.

5. HAMMAR MA1/ EC Hydrostatic Single Point Indicator Auto This inflation mechanism also requires both water and pressure combined to activate automatically. It requires full immersion in water to a minimum 10 cm depth to activate fully. At this point the hydrostatic valve opens and lets the water meet the water sensitive element that in turn releases a stainless steel coil spring. The spring then drives a cutter into the end of the gas cylinder to pierce it and release the gas through the sealing ring aperture in the bladder and inflate the lifejacket. This system differs from the A1 / M1 inflator in that it has the advantage of the cylinder being glued into the back of the system to give a secure seal so that it cannot come loose or detached in use. The single point indicator on the front also gives the user an immediate visual check of the operational status of the cylinder and cartridge. The Automatic system is backed up by a manual override, which allows the user to pull the toggle and activate the cutter to pierce the gas cylinder in order to inflate the lifejacket alternatively.

2. UNITED MOULDERS LTD Pro Sensor Manual Single Point Indicator The UML Pro Sensor Manual only Single Point Indicator system will also not activate automatically and can only be activated by means of the pull toggle. There is no clip to break off on this system. The lever is simply pulled down fully and can be clicked back into place afterwards. Benefits of the Single Point indicator system: the user has immediate visual check of the operational status of the cylinder.

3. HAMMAR M1 Manual The Hammar Manual only system will not activate automatically and can only be activated by means of the pull handle which breaks off completely when pulled correctly

SPARE PARTS HALKEY ROBERTS Alpha Auto

LIN07M0RA

UNITED MOULDERS PROSENSOR DUAL POINT INDICATOR SYSTEM

LIN04M0RA

HALKEY ROBERTS ALPHA AUTO INFLATION SYSTEM + T-TOGGLE

LIN04M0RW

HALKEY ROBERTS ALPHA AUTO INFLATION SYSTEM + BALL TOGGLE

LIN04SBRA

HALKEY ROBERTS AUTO SUPER BOBBIN

LCYS38000

CO2 CYLINDER 38GR

LCY060000

CO2 CYLINDER 60GR

HAMMAR A1/M1 AUTO FRONT

UNITED MOULDERS LTD MK5 Auto

UNITED MOULDERS MK5 AUTO INFLATION SYSTEM

LIN03CARA

UNITED MOULDERS MK5 AUTO INFLATION SYSTEM

LIN03PARA

UNITED MOULDERS MK5 MANUAL FIRING CLIP

LCYS38000

CO2 CYLINDER 38GR

LCY060000

CO2 CYLINDER 60GR

HAMMAR A1 / M1 Hydrostatic Auto

LIN01F000

LIN03MARA

UNITED MOULDERS PROSENSOR AUTO CARTRIDGE

HALKEY ROBERTS ALPHA MANUAL FIRING CLIP

CO2 CYLINDER 33GR

LIN07C0RA

LIN04PARA

LCY033000

TECHNICAL SPARE PARTSSTANDARDS

UNITED MOULDERS LTD   Pro Sensor Auto Dual Point Indicator

1MZWA2YN3

LIN01B000

1MZWA2YN3

LIN01B000

NEOPRENE SLEEVE 3 SIZES: FOR 33 GM CYL., 38 GM CYL., 60 GM CYL.

HAMMAR A1/M1 AUTO BACK

HAMMAR M1 Manual LIN02F000

HAMMAR M1 MANUAL FRONT

NEOPRENE SLEEVE 3 SIZES: FOR 33 GM CYL., 38 GM CYL., 60 GM CYL.

HAMMAR MANUAL BACK

101

LCY033000

CO2 CYLINDER 33GR

LCYS38000

CO2 CYLINDER 38GR

LCY060000

CO2 CYLINDER 60GR

LCY033000

CO2 CYLINDER 33GR

LCYS38000

CO2 CYLINDER 38GR

LCY060000

CO2 CYLINDER 60GR

HAMMAR MA1/ EC Hydrostatic Single Point Indicator Auto

UNITED MOULDERS LTD Pro Sensor Manual Single Point Indicator

LIN04F000

LIN08MORA

1MZWA2YN3

UNITED MOULDERS MANUAL INFLATION SYSTEM

NEOPRENE SLEEVE 3 SIZES: FOR 33 GM CYL., 38 GM CYL., 60 GM CYL.

SPARE PARTS

HAMMAR AUTO FRONT SINGLE POINT INDICATOR

LCY033000 LIN04B330

HAMMAR BACK + 33GR CYLINDER

LIN04B380

HAMMAR BACK + 38GR CYLINDER

CO2 CYLINDER 33GR

LIN04B600

LCYS38000

CO2 CYLINDER 38GR

LCY060000

CO2 CYLINDER 60GR

HAMMAR BACK + 60GR CYLINDER

ACCESSORIES UNITED MOULDERS LTD Mini-Manual

LIN09M0RM

UNITED MOULDERS MINI MANUAL INFLATION SYSTEM

1MZ9A2GWL

LIN03PMRA

STANDARD CRUTCH STRAP FOR ALL LIFEJACKETS APART FROM COMPACT + FR/AST MODELS. LENGTH 120 CM.

UNITED MOULDERS MANUAL FIRING CLIP

2MZFA2GWL

CRUTCH STRAP FOR COMPACT ONLY. LENGTH 140CM

2MZRA2GWG

FR/AST CRUTCH STRAP FOR ALL FR/AST LIFEJACKET MODELS. LENGTH 120CM

LLI00000U

SOLAS S.O.S. LIGHT

LWH030C10 WHISTLE

103

LCY033000

CO2 CYLINDER 33GR

LCYS38000

CO2 CYLINDER 38GR

LCY060000

CO2 CYLINDER 60GR

1MZWA2YN3033

NEOPRENE SLEEVE FOR 33 GM CYLINDER

1MZWA2YN3038

NEOPRENE SLEEVE FOR 38 GM CYLINDER

1MZWA2YN3060

NEOPRENE SLEEVE FOR 60 GM CYLINDER

SOLAS REFLECTORS SELF-ADHESIVE LENGTH : 12CM IRFQ50M0R LENGTH : 22CM IRFP50M0R

1MZ1A2VP1 (CE) STD SIZE FR WELDERS COVER

DIFFERENT TYPES OF PROTECTION CAN BE OPTIONALLY COMBINED

FLOATATION GARMENT – CONSTANT WEAR SUIT A floatation garment is a type of constant wear suit designed to keep the wearer warm and dry at work and protect against drowning in water with a degree of thermal protection against cold shock and hypothermia. These garments are also technically classified as PFDs or buoyancy aids, always offering a minimum of 50 Newtons buoyancy. By means of the inherent floatation buoyancy foam lining, this type of garment will keep wearers afloat indefinitely and allow them to swim without undue encumbrance. However they will not automatically self-right the wearer from a face-down position . For this the use of a compatible lifejacket is required , preferably of a 275N buoyancy level to ensure optimum selfrighting performance is achieved.

• INHERENT BUOYANCY or INFLATABLE BUOYANCY • THERMAL PROTECTION AGAINST HYPOTHERMIA

INFLATABLE LIFE JACKET

• FOUL WEATHER PROTECTION

Personal flotation device from which the buoyancy is obtained by inflating it by mouth (orally inflated) or from a compressed CO2 gas cylinder; either manually by pulling a handle operated by the wearer, or automatically without the wearer carrying out any action, but as a result of immersion in water, either by a hydrostatic mechanism or a cellulose cartridge type of mechanism. Mullion 150N and 275N inflatable life jackets are made of a single-chamber bladder (EN / ISO standards) or double-chamber bladder (required for IMO/SOLAS regulations). A ‘stand alone’ automatic life jacket will self-right the wearer if correctly donned; it will turn over a person falling into the water face down, even if he/she is unconscious, it will NOT, however protect against cold shock or hypothermia. These are mainly worn on their own in warmer climates where there is less risk of cold water immersion and shock.

• HIGH VISIBILITY • FLAME RETARDANT, CHEMICAL RESISTANT AND ANTISTATIC PROPERTIES

DEFINITIONS AND EXPLANATIONS INHERENT BUOYANCY MATERIAL Buoyancy provided by a material which is less dense than water, e.g. a closed cell foam, and forming a permanent part of the garment.

PERSONAL FLOTATION DEVICE (PFD) A safety device for persons engaged in activities, whether in relation to their work or their leisure, in or near water. PFDs, when correctly worn, should give a reasonable assurance of safety from drowning to a person who is immersed in water by providing a specific amount of extra buoyancy to increase the chances of survival.. PFDs can be divided into the following two main classes:

TECHNICAL STANDARDS

TECHNICAL INTRODUCTION TO MARITIME SAFETY CLOTHING

They can also be worn in conjunction with a constant wear suit, the latter being the ideal combination to give the wearer all round protection. Where the two are worn together, it is important to follow the donning instructions strictly and check and test their compatibility as one can counteract the other and have a negative effect on the self-righting properties. For example a 150 Newton life jacket worn with a constant wear floatation suit is not recommended for self-righting purposes; for this application we advise the use of a compatible 275 Newton lifejacket. If in doubt please contact Mullion for guidance.

DOUBLE-CHAMBER BUOYANCY SYSTEMS Buoyancy provided by 2 separate inflatable compartments, such that if mechanical damage occurs to one, the other can still operate and provide sufficient buoyancy on its own (required for IMO / SOLAS application).

• those which provide face up in-water support to the user regardless of physical conditions (lifejackets). DOUBLE CHAMBER BLADDER

• those which require the user to make swimming and other postural movements to position the user with the face out of the water (buoyancy aids).

FRONT CHAMBER

INFLATION SYSTEM

+ LAYER

Within these main two classes there are a number of levels of support, types of buoyancy, activation methods. INFLATION SYSTEM

BACK CHAMBER

BUOYANCY AID Garment or device which when correctly worn and used in water, will provide a specific amount of buoyancy to assist the wearer to float in a vertical or upward position with the airways clear of the water. This type of device will NOT self-right the wearer from a face-down position.

HYPOTHERMIA A condition where the body core temperature is below 35°C, that is, 2°C lower than the ‘normal’ core body temperature (=37°C). The state of hypothermia is of a higher risk to a person immersed in cold water than in a cold air environment, due to the fact that water is a greater conductor of heat than air. Consequently the body cools much more rapidly in water than in still air of the same temperature (approximately 25 times faster).

105

EN 393 / EN ISO 12402-5: 50N BUOYANCY AIDS

EN ISO 12402-5 EN 393

Have a buoyancy of no less than 50 Newton for the average adult. This level is intended for use by those who are competent swimmers and who are near to bank or shore, or who have help and a means of rescue close at hand. These garments have minimal bulk, but they are of limited use in disturbed water, and cannot be expected to keep the user safe for a long period of time. They do not have sufficient buoyancy to protect people who are unable to help themselves. They require active participation by the user.

SOLAS LIFEJACKETS All lifejackets must be of double chamber design with 2 automatic inflation systems as well as be fitted with a SOLAS approved light and buddy line for optimum safety. SOLAS IMMERSION + ANTI-EXPOSURE SUITS These Immersion and Anti-Exposure Suits should provide the highest level of safety and performance. They incorporate inherent buoyancy which gives the wearer flotation and thermal protection in order to provide the optimum chance of survival and rescue before any negative effects of cold water immersion set in and to protect against the risks of drowning. In accordance with the SOLAS requirements, according to the LSA Code, Chapter II, 2.3:

EN 395 / EN ISO12402-4: 100N LIFE JACKETS Have buoyancy of no less than 100 Newton for the average adult. This level is intended for those who may have to wait for rescue, but are likely to do so in sheltered water. The device should not be used in rough conditions. EN ISO 12402-4 EN 395

- Where required as Immersion suits, they are designed to cover the whole body (including boots to cover the feet), with the exception of the face and with separate gloves that are permanently attached to the suit. - Where required as Anti-Exposure suits only, they can be designed and supplied without the boots fitted (as permitted by the Administration) and equipped with a pocket for a portable VHF radio / telephone.

TECHNICAL STANDARDS

MARITIME PPE PRODUCT STANDARDS

An un-insulated immersion suit or anti-exposure suit is intended to provide the wearer with up to 1 hour protection in a water temperature range of > 5°C

EN 396 / EN ISO 12402-3: 150N LIFE JACKETS Have buoyancy of no less than 150 Newton for the average adult. This level is intended for general application or for use with foul weather clothing.

EN ISO 12402-3 EN 396

An insulated immersion suit is intended to provide the wearer with up to 6 hours protection in a water temperature range of > 0°C. These suits are designed to be worn in conjunction with a compatible SOLAS / MED approved lifejacket. EN ISO 15027-1: CONSTANT WEAR SUITS

EN 399 / EN ISO 12402-2: 275N LIFE JACKETS Have buoyancy of no less than 275 Newton for the average adult. This level of lifejacket is intended primarily for offshore use under extreme conditions. It is also of value to those who are wearing clothing which traps air or loads such as tool belts which may adversely affect the self-righting capacity of the lifejacket. EN ISO 12402-2 EN 399

A constant wear suit is designed to be worn as a working suit to keep the wearer warm and dry during normal activities and to provide thermal protection in the event of accidental immersion, to prolong life and to aid rescue. An individual’s estimated thermal protection time when wearing this type of equipment will depend upon the water temperature, weather conditions, clothing, the cold tolerance of the person and the person’s behaviour. The primary aims in wearing a constant wear suit are: a) to reduce the risk of cold shock and to delay the onset of hypothermia; b) to enable the user to propel himself in the water and extricate himself from the water without it becoming an encumbrance;

IMO / SOLAS / MED The International Maritime Organisation governs the Convention of Safety Of Life at Sea (SOLAS). This Convention requires that SOLAS requirements are met for all life-saving equipment carried and used on board all ships on international voyages including passenger ships and cargo ships of 500 gross tonnes or more. This includes lifejackets, abandonment suits and immersion suits. Recognition that the equipment fully complies with the requirements of the MED (Marine Equipment Directive) will be denoted by a ‘Ships Steering Wheel’ mark which must be on all equipment sold to European Community Ships of 500 tons or more in size.

c) to make the user sufficiently conspicuous in the water so as to aid his recovery.

107

THERMINAL PROTECTION CATEGORIES immersed CLO

0,20

0,33

0,50

0,75

< 5°C

1,5h

2,5h

5°C - 10°C

1,5h

2,5h

4,5h

10°C - 15°C

15h

> 15°C

15h

24h

water temperature

estimated protection time

An abandonment suit is designed to be donned in an emergency or planned abandon ship situation and will provide protection from cold shock and delay the onset of hypothermia. The complete immersion system (suit and clothes worn under the suit) should be able to keep the user alive long enough for the rescue services to find and recover them. An individual’s estimated thermal protection time will depend on water temperature and wave state as well as their physiology. The primary aims in wearing an abandonment suit are:

SOME DEFINITIONS CLO VALUE: A unit to express the relative thermal insulation value. One CLO = 0.1555 °C x m2 / W DRY SUIT: A garment that stops the entry of significant quantities of water upon immersion, the insulation depends on the wearer staying dry.

a) to reduce the risk of cold shock and delay the onset of hypothermia;

WET SUIT: A garment that allows the controlled entry and exit of water when the wearer is immersed. By keeping a stationary layer of water close to the body, this will work as an insulation layer.

b) to enable the user to propel himself in the water and extricate himself from the water without it becoming an encumbrance;

IMMERSION SUIT: A suit intended to protect the wearer from the effects of immersion in cold water.

This protocol ensures compatibility of combinations of lifejackets and immersion suits likely to be used in differing emergency scenarios by offshore installation personnel.

CONSTANT WEAR SUIT: A floatation garment is a type of constant wear suit designed to keep the wearer warm and dry at work and protect against drowning in water with a degree of thermal protection against cold shock and hypothermia. These garments are also technically classified as PFDs or buoyancy aids, always offering a minimum of 50 Newtons buoyancy. By means of the inherent floatation buoyancy foam lining, this type of garment will keep wearers afloat indefinitely and allow them to swim without undue encumbrance. However they will not automatically self-right the wearer from a face-down position . For this the use of a compatible lifejacket is required , preferably of a 275N buoyancy level to ensure optimum self-righting performance is achieved.

The format for this Test Protocol is based on core tests, such as donning, ergonomic factors and inwater performance.

ABANDONMENT SUIT: An immersion suit, designed to permit rapid donning in the event of an imminent immersion.

EN 1095 / ISO 12401: DECK HARNESSES / SAFETY LINES

OTHER EUROPEAN PPE STANDARDS

c) to make the user sufficiently conspicuous in the water so as to aid his recovery. HSE / MENSAFE COMPATIBILITY TEST PROTOCOL FOR LIFEJACKETS AND IMMERSION SUITS ON OFFSHORE INSTALLATIONS

This European and International Standard is applicable to harnesses and safety lines in the following sizes of body weight. Size1: over 50kg , Size 2: between 20kg and 50kg , Size 3: lower than 20kg; which are intended to be worn by all persons when in the exposed cockpit or on the working deck of a craft afloat. It is not applicable to dinghy “trapeze” harnesses, windsurfing harnesses, seat harnesses for fast motor boats or harnesses intended to protect against falls from a height.

x y EN 343

Protective clothing against rain, wind and cold at temperatures higher than -5°C.

EN 1149-5 Protection against the danger caused by static electricity

EN 1149-5: 2008

Performance parameters: x: waterproofness (3 levels) y: breathing properties (3 levels)

Deck safety harnesses and safety lines manufactured according to this International Standard will give reasonable assurance that the wearer will remain attached to the craft. The primary aims in wearing a deck safety harness are:

EN ISO 20471

a) to prevent the wearer from falling into the water, and b) to assist in recovering the wearer onto the working deck.

EN 343

EN ISO 20471: 2013

High-visibility clothing: x: surface of fluorescent and retroreflective material (3 levels) y: quality of the retroreflective material (2 levels)

EN ISO 14116 EN ISO 14116: 2008 Index 1

Protection against flames: x: flame spreading index (3 levels). y: durability index

EN 14605 EN 14605: 2005 +A1:2009

Protection against liquid chemicals, spraytight (type 4)

Type 4

Xf2 Xr2 Y2 Z2

EN 469: 2005

EN 469 Protective clothing against fire Xf2 the performance in the heat test : flame Xr2 the performance in the heat test : radiation Y2 the performance in the waterproofness tests Z2 the resistance against water vapour

EN ISO 11612 EN ISO 11612: 2008 A1 B2 C2 E1 F2 W33

Protective clothing for workers exposed to heat: A: min. requirements, fabric combination conforms to EN 533 index 3 + min.

TECHNICAL STANDARDS

ISO 15027-2: ABANDONMENT SUITS

EC Council Directive 89/686/EC:

Basic Health and Safety Requirements for PPE.

109

SIZE TABLE

NOTES

SIZE TABLE FLOTATION GARMENTS: BODY MEASUREMENTS Size

Mass Kg

Height

Chest

Waist

< 50 kgs

158-176

80-88

68-76

50-70 kgs

164-182

88-96

76-84

70-80 kgs

164-182

96-104

84-92

80-90 kgs

170-188

104-112

92-100

90-110 kgs

170-188

112-120

100-108

XXL

> 110 kgs

176-194

120-128

108-116

XXXL

> 110 kgs

176-194

128-136

116-124

XXXXL

> 110 kgs

176-194

136-144

124-132

SIZE RANGE SMART SOLAS: BODY MEASUREMENTS SIZE

Height

Chest

Waist

Socks 1MG4

164-182

80-96

68-84

40/42

170-188

96-112

84-100

43/45

176-205

112-136

100-124

43/45

176-205

136-144

124-132

46/48

Socks 1MG5

43/45

SIZE RANGE SINGLE CHAMBER LIFEJACKETS SIZE

Mass Kg

Chest

Height

UNI

≥ 40 Kgs

86cm-151cm

≥ 150 cm

SIZE RANGE HI-RISE LIFEJACKETS SIZE

Mass Kg

Chest

Height

UNI

≥ 40 Kgs

≤ 180 cm

≥ 150 cm

INDEX BY REF. 1MC3. . . . . 1MC4. . . . . 1MC6. . . . . 1MD7 . . . . . 1MG4. . . . . 1MG5. . . . . 1MG9. . . . . 1MH4 . . . . . 1MH9 . . . . . 1MHA. . . . . 1MHE. . . . . 1MHP . . . . . 1MHW . . . .

pg 30 pg 31 pg 41 pg 16 pg 40 pg 42 pg 26 pg 14 pg 34 pg 22 pg 23 pg 32 pg 43

1MI8. . . . . . 1MJA. . . . . . 1MJB. . . . . . 1MM7. . . . . 1MM8. . . . . 1MMG . . . . 1MN2 . . . . . 1MQ3. . . . . 1MQS. . . . . 1MU4 . . . . . 1MU9 . . . . . 1MUE . . . . . 1MUF . . . . .

pg 22 pg 35 pg 18 pg 17 pg 15 pg 27 pg 46 pg 35 pg 27 pg 74 pg 75 pg 71 pg 77

1MUI. . . . . . 1MUJ. . . . . . 1MV6 . . . . . 1MV8 . . . . . 1MXH. . . . . 1MY4 . . . . . 1MYD. . . . . 1MYG. . . . . 2MS1. . . . . . 2MS2. . . . . . 2MS9. . . . . . 2MSF . . . . . 2MSG. . . . .

pg 70 pg 76 pg 65 pg 68 pg 75 pg 68 pg 69 pg 77 pg 86 pg 87 pg 89 pg 84 pg 85

2MSQ. . . . . 2MT1. . . . . . 2MT2. . . . . . 2MTD. . . . . 3MV1 . . . . . 3MV4 . . . . . 3MV7 . . . . . 3MV9 . . . . . 3MVB . . . . . 3MVE . . . . . 3MVF . . . . . 3MVH. . . . . 3MVI. . . . . .

pg 85 pg 88 pg 87 pg 89 pg 56 pg 62 pg 56 pg 80 pg 63 pg 57 pg 63 pg 58 pg 56

MULLION BELGIUM (EXPORT) Fabriekstraat 23 8850 Ardooie - Belgium T +32 (0) 51 741 502 - F +32 (0) 51 740 963 info@mullion-pfd.com

MULLION IRELAND Gweedore Business Park Derrybeg, County Donegal - Ireland T +353 (0) 74 9531169 - F +353 (0) 74 9531591 ireland@mullion-pfd.com

MULLION UNITED KINGDOM 2 Hebden Road - Scunthorpe North Lincolnshire - DN15 8DT - United Kingdom T +32 (0) 51 740 830 - F +32 (0) 51 740 963 unitedkingdom@mullion-pfd.com

www.mullion-pfd.com