DIY Fire staff

Tutorial : Fire staff

Materials?

Tools?

88 1 steel tube (20mm diameter / length 150cm) 88 2 wooden pegs (18mm diameter / length 20 cm) 88 1 Bicycle grip for handles (1 roll) 88 2 strips of Kevlar (5cm / 200cm) 88 8 wood screws M4 88 8 steel washers M4 (18mm diameter) 88 2 strips of aluminum tape (5 cm / 5cm) 88 2 pieces of electrician tape

88 1 hacksaw /! \ Warning to you /! \ 88 1 wood saw /! \ Make sure your fingers /! \ 88 1 grated wood 88 1 marker 88 1 punch 88 1 cruciform screwdriver 88 meter 88 1 drill 88 1 4mm métal drill 88 1 pair of scissors

aa Designed for fire manipulation this prop is «balanced et thin».

Fire staff manufacturing tutorial directed by Burno for Burncrewconcept.net

ß 1

How to make it ?

88 Trim your tube to 150 cm length and mark its center 75cm. The length of the staff must be between the floor and your shoulder.

88 Prepare your marks to fix the grip at 45cm and 105cm (~ 60cm).

88 Draw a line in the direction of the tube to mark the holes. Then mark them with a needle.

Ă&#x; 2

Fire staff manufacturing tutorial directed by Burno for Burncrewconcept.net

88 Drill holes with the drill onthe marks.

88 Raper the wooden sticks so they fit inside the diameter of the tube and fit them with a hammer.

Fire staff manufacturing tutorial directed by Burno for Burncrewconcept.net

Ă&#x; 3

88 Choose a length of wick (between 100 cm and 200 cm depending on the thickness of Kevlar) for each end.

88 Attach your wick to the tube with a piece of tape and wrap it. Locate your holes and screw.

88 Stick the grip diagonally from one brand to another and cover it whith the aluminium tape.

Ă&#x; 4

Fire staff manufacturing tutorial directed by Burno for Burncrewconcept.net

88 Et voilĂ !

We hope this tutorial will help you and it will inspire your own customizations.

Fire staff manufacturing tutorial directed by Burno for Burncrewconcept.net

Ă&#x; 5