DESIGN, CONSTRUCTION AND INSTALLATION OF SPECIAL PLANTS AND MACHINERY FOR INDUSTRY
COMPANY PROFILE
PLAN SRL Via delle Nebbie 7, Chiusi (Siena) 53043 ITALY Phone & Fax +39 0578222197 - Phone & Fax +39 057821296 (Commercial Dept.) www.planitalia.it info@planitalia.it
Rev 21/07/2016
COMPANY PROFILE
INTRODUCTION PLAN was founded in 1991 by Mr. Eugenio Lucheroni, current Chairman of the Board. Over the years PLAN has become a leading company for the industrialized production of concrete products and this success is due in large part to the innovative solutions created by dedicated technical and production staff to satisfy individual customers’ needs. PLAN supplies turn-key plants and machinery for the manufacture of: - Concrete railway sleepers (crossties) for use in any application, from heavy duty cargo lines to high speed passenger lines, turn-outs and ballastless track systems; - Precast elements to be used for the construction of social housing, apartments and high rise buildings on an industrial scale (in rapidly expanding economies around the world, where the demand for houses is very high, PLAN proposes special production lines for the construction up to 10 apartments per day with very high quality and low construction cost). - Precast elements to be used for the construction of any kind of buildings (such as social housing, apartments, high rise buildings and sky scrapers, hotels, schools, hospitals, multistorey car parks, offices, industrial and commercial buildings…) on an industrial scale; PLAN services include design, manufacture, installation and commissioning of these manufacturing facilities. Engineering packages available include operator training and aftersales service (including permanent presence of PLAN engineers and technicians as supervisors of all operations within the factory) to maximize the Owner’s return on investment. PLAN has supplied over 3000 machinery and equipment to over 120 Clients in 40 different countries. 110 nos. complete factories have been designed, fabricated, tested and commissioned by PLAN all around the world. Strict attention to European Safety Codes means that all equipment is CE marked and is compatible with work-place safety regulations world-wide. PLAN’s top management has many years of experience in the design and fabrication of industrial machinery, as well as manufacturer of precast products, so the equipment is designed to be simple to use and simple to maintain.
2
COMPANY PROFILE
LOCATION PLAN currently employs approx. 80 people in two factories (4000m2 of covered surface area):
Factory 1
Factory 2
3
COMPANY PROFILE
¾ All machinery and equipment supplied by PLAN are designed, manufactured and tested prior to shipment in these two factories. ¾ At PLAN all software is developed internally; all electronics and electrical systems are built in-house, and all engineering and design is rebounded off of a group of international experts in these fields. ¾ PLAN has shipped over 3000 machines from these factories. 4
COMPANY PROFILE
PRODUCTS
CONCRETE RAILWAY SLEEPER MANUFACTURING PLANTS
PRECAST AND PRESTRESSED CONCRETE ELEMENT MANUFACTURING PLANTS
5
COMPANY PROFILE
CONCRETE RAILWAY SLEEPERS (CROSSTIES) •
PLAN is the largest pure sleeper factory supplier in the world today and has the widest possible experience in supplying working sleeper factories that fulfil clients’ needs;
•
PLAN has a considerable group of specialized technicians in this field and that is why PLAN supplies carousel plants with 5 different production technologies;
•
PLAN has wide experience in the production of concrete elements in difficult environments;
•
PLAN has a wide experience in the application of pre-stressing not only related to railway sleepers;
•
PLAN’s top management has several years of “hands-on” experience in sleeper production;
•
PLAN may provide Clients with detailed, in depth advice and support on all aspects of sleeper manufacturing: - Aggregate handling; - Batch plant specifications; - Concrete mix design; - Batch plant control system; - Concrete temperature control systems; - Sleeper design and calculations;
•
47 successful projects in 22 years ranging from 20 sleepers per hour to 200 sleepers per hour.
•
More than 45 straight “1st time” sleeper certifications;
6
7
COMPANY PROFILE
CAROUSEL SYSTEM PLAN’s “carousel” manufacturing method process is based on a continuous horizontal or vertical carousel circulation in a closed cycle. Moulds are transported simultaneously through the plant from one work station to the next in the production zone with cured sleepers being completed on the finishing line. At each work station the different phases are carried out, with computerized quality control recording each of the critical operations. The production phases can be fully or semi-automated depending on customer preference. Using PLAN’s “carousel” method it is easy to produce different types of sleepers (different dimensions, tensioning loads and rail fastenings) during the same working shift.
MARGAPLAN® SYSTEM In 2000 PLAN finished the development of the new MARGAPLAN® system for post-tensioned, high performance sleepers designed for implementation as part of the latest generation of high speed lines being planned around the world. Sleepers manufactured using the MARGAPLAN® post-tensioned system used throughout the Italian Railway System, such as the High Speed Turin – Milan and the Florence – Bologna, have the speed record of 350.8 Km/h without vibrations and the speed record of 362 Km/h in tunnel. PLAN was the first plant manufacturer to have successfully homologated sleepers in complete compliance the newest European Norms 13230
8
COMPANY PROFILE
9
COMPANY PROFILE
TURNOUT BEARERS
10
COMPANY PROFILE
11
COMPANY PROFILE
AUTO DATA COLLECTION AND STORAGE
Production data collected and stored in a Windows® PC with the chance to control the production on-line. Each mould is equipped with a ID tag.
CONCRETE CURING
12
COMPANY PROFILE
BALLASTLESS TRACK
PLAN also supplies moulds and production lines for ballastless track (also known as “slab track”) applications ranging from Light Rail Transit to Regular Rail System and High Speed
13
14
COMPANY PROFILE
COMPANY PROFILE
CONCRETE PRECAST ELEMENTS PLAN offers various solutions for turnkey factories depending on the structural systems and production capacities required by the Client and on the availability of local resources. • PLAN has a wide experience in the production of concrete elements in difficult environments;
-
•
PLAN has an in-depth knowledge of element design, pre-stressing and handling within the factory and at the site;
•
PLAN has many years of “hands-on” experience in the production and erection of precast elements;
•
PLAN can provide the Client with detailed, in depth advice and service on all phases of precast concrete manufacturing:
Aggregate handling Batch plant specification Mixer specification Batch plant control system Concrete temperature control
-
Design of precast elements Curing of precast elements Storage of precast elements Transport of precast elements Erection of precast elements
15
COMPANY PROFILE
PLAN supplies: ¾ Automated factories for the production of Industrial and Commercial structures (foundations, columns, beams);
16
COMPANY PROFILE
¾ Automated factories and machinery for the production of hollow-core slabs;
¾ Automated factories and machinery for the production of roof elements;
17
COMPANY PROFILE
Automated factories and machinery for the production of wall panels;
Example of precast buildings
18
19
COMPANY PROFILE
PRODUCTION CENTRE FOR COLUMNS PLAN provides a fast and flexible system for the production of precast columns with varying sizes, using a minimum of labour and ensuring that the producer can modify the production centre and cast different columns every single working shift.
PLAN production centre allows to produce columns from 500x500 to 800x1000mm including all the intermediate sections by using interchangeable modular bottom shutters that are positioned with a simple interlocking system and are adjusted to height, in pre-set positions, by hydraulic actuators. It also allows the producer to place corbels on any side and at any spacing that may be required. This is accomplished by modular infill elements, which have the shape of the desired corbel and replace the modular shutter elements in the position required. The side shutters are opened and closed by hydraulic cylinders and the bottom shutter moves sideways when the side shutters open, making stripping a stress free operation, both for the pre-cast unit and the operator.
20
COMPANY PROFILE
PRODUCTION CENTRE FOR PRESTRESSED BEAMS
NEW
BEAM CUTTING WITHOUT SEPARATORS
21
COMPANY PROFILE
MULTIPLE STRAND STRESSING AND RELEASE - High stressing quality: by a very simple initial reinforcement alignment and automatic speed change, which decreases when the load rises, this system permits to avoid plastic deformation of wires. The load applied symmetrically permits to avoid problems to the stressing abutments, to the self-stressing or to the foundations. - Labour saving: with cycle time of 5 รท 10 minutes for each mould as for length, the multiple stressing permits a production cycle that is much shorter than the traditional stressing systems. - Material saving: reinforcements are fixed to the ends of the moulds. In this way, scraps will be reduced at all. - Safety: stressing is done by means of controls at distance and the low speed makes strand locking much safer and no operator need to operate directly in the reinforcements and in the anchorages.
Stressing abutments with multiple stressing machine for long-span roof elements with control box
Stressing abutments with multiple stressing machine for beams with control box
Stressing abutments with multiple stressing machine for hollow-core slabs Strand storage
Mobile anchorage
Fixed anchorage
NEW AUTOMATIC STRAND LOCKING: Not using manual chucks for both anchorages makes strand locking/unlocking operations much easier and safer and permits to cut strands at the end of the products instead of close to the anchorages. In this way cut strands will be ready to be drawn again to the anchorage avoiding the wastage of their not used length. 22
COMPANY PROFILE
PRODUCTION CENTRE FOR ROOF ELEMENTS PLAN technology provides to produce roof elements with a casting machine, which uses different kind of moulds to obtain excellent sizes of long-span roof elements and roof infill panels: - SPEED: from 2 to 3 m/minute; - NOISE: 70 dB; - FLEXIBILITY: many kind of long-span roof elements and roof infill panels in the same shift. LONG-SPAN ROOF ELEMENTS
The machine uses PLAN technology for concrete vibration. No vibration system in mould is required
ROOF INFILL PANELS
in order to work quietly and with high quality concrete
PRODUCTION AREA
MOULD PREPARATION
STRAND CUTTING
PRODUCTS
23
COMPANY PROFILE
PRODUCTION OF ROOF INFILL PANELS Automatic stripping
Automatic handling
Insulation and water proofing application
Automatic steel cladding
Automatic painting
Automatic packing
24
COMPANY PROFILE
WALL PANEL PRODUCTION PLAN offers its technology to cast the wall panels by a casting machine that could be “overhead and independent or integrated into the casting gantry. The concrete is vibrated directly by the casting machine during concrete pouring, without noise and with high quality as for granulates as for the finishing. Only one operator for the casting machine is required, either for long-line moulds and automatic carousel systems. - SPEED: from 2 to 3 m/minute; - NOISE: 70 dB for vibration; - FLEXIBILITY: for casting of different kind of panels with one or more layers. 1st LAYER
2nd LAYER with upper surface finishing
grey concrete or face-mix concrete
The machine uses PLAN technology for concrete vibration. No vibration system in mould is required in order to work quietly and with high quality concrete
Equipment Hydraulic Side Shutter
Tilting Table
Washing Machine
Smoothing Machine (3 Helicopters)
Smoothing Machine (1 Helicopter)
Milling / Polishing Machine
25
COMPANY PROFILE
CAROUSEL / CIRCULATING SYSTEM FOR WALL PANELS The production process with PLAN’s carousel system is based on longitudinal and transversal conveyors, which form a continuous cycle. Moulds are moved continuously in the production area from one station to the other, while stripped panels are moved by proper trolleys. At each working station, the operation is performed. A specified computerized software system allows the producer to have a detailed quality control of all panels (moulds are equipped with a ID tag). The main features of PLAN carousel system, which characterize its speed, flexibility and product quality, are the following: - side shutters on board of each mould to make opening/closing and cleaning operations easy; - automatic concrete distribution with any vibration of mould in order to have the high quality and to save concrete; with any risk to move reinforcement and inserts, any noise and using only one operator to control; - Upper surface smoothing as for the mould bottom after a short pre-curing; - The entire PLAN factory is placed in the production shop without any foundation and additional civil works
Production data: •
from 1000 to 3000 m2 daily production; • 10-minute cycle time per mould; • 48/60 total moulds per shift; • from 4 to 8 minute per m2 labour incidence; • from 8 to 15 operators
Only with all PLAN technical solutions and patents together it’s possible to produce one mould every 10 minutes with the production cost for labour of 4 minutes every square meter of panel.
26
27
COMPANY PROFILE
HANDLING SYSTEMS
Transport of concrete buckets. 5 + 5 Ton capacity
Transport of roof infill panels. 10 Ton capacity
Transport of preassembled reinforcements. Bent track with rails and/or magnetic guides. 12 Ton capacity
Transport of long-span roof elements. 200 Ton capacity
Transport of beams and columns. 250 Ton capacity
Transport and/or washing of wall panels with carousel system. 40 Ton capacity
Transport of special panels. 200 Ton capacity
Transport of hollow core slabs. 200 Ton capacity
80V industrial battery powered cars with 5-to-6-day battery life span 28
COMPANY PROFILE
LIFTING SYSTEMS Storage and/or loading of hollow-core slabs. 16 Ton capacity
Self-levelling lifting beam for columns and beams handling. 12 Ton capacity
Lifting beams and clamps for hollow-core slab stripping. From 8 to 16 Ton capacity
Self-levelling lifting beam for wall panel handling. 12 Ton capacity
Lifting beams and clamps for hollow-core slab installation
Lifting beam for special slabs handling. 15 Ton capacity
29
COMPANY PROFILE
HOLLOW-CORE SLABS PLAN offers the most cost effective and performing hollow-core production system in the market. The PLAN hydraulic extruder is the lowest “life-cycle cost� machine available (including slipformers) and the initial investment cost is very competitive. Mould preparation, stressing, casting, stripping and handling systems are all highly automated and easy to use. Casting bed with heating system and integrated rails
Automatic multiple, fast, safe stressing without waste of strands.
30
31
COMPANY PROFILE
CASTING BED PREPARATION TECHNICAL SPECIFICATIONS Dimensions (meter) 3.5 x 2.0 x 2.35m (h) Weight 32 kN Extrusion speed 0 – 40 m/minute Connection power Industrial battery 80 V Electrical absorption (5 kW battery charger) - Casting bed cleaning with a rotating brush to remove dust and debris from the casting bed surface (rails included); - Pulling strands all along the casting bed (up to no. 10 strands at time); - Release agent oil application all along casting bed with strand protection; - Bed cover placing and removal;
32
COMPANY PROFILE
CASTING
Specifications: - Noise less than 85 dB; - Since no moving parts are in contact with the concrete, wear and maintenance are very reduced; - Hydraulic activation system; - No complex mechanical transmission to be synchronized; - Simplified maintenance and easily accessible die module; - Quick change of die module.
33
COMPANY PROFILE
ELECTRIC POLE PRODUCTION
SLAB CUTTING ON THE BED ST-40 saw to cut up to 1200x420 mm
ST-50 saw to cut up to 1200x520 mm
ST-70 saw to cut up to 1200x720 mm
34
COMPANY PROFILE
AUTOMATIC LONG SLAB STRIPPING AND STATIONARY CUTTING CENTRE Slab separation and locking with additional safety hooks
Automatic soundproofed stationary cutting centre with water collection
Slab selection for storage
Note: 3 minutes/m2, direct labour for hollow-core slab produced with complete PLAN factories: stressing, casting bed preparation, hydraulic extruder and stripping with cutting centre. 35
COMPANY PROFILE
PRODUCTION OF SPECIAL ELEMENTS Ribbed slabs H400 mm max. size
Special solid slabs from H250 mm to H400 mm size
Profiled slabs from H400 mm to H1000 mm size
36
COMPANY PROFILE
PRODUCTION OF SPECIAL PRESTRESSED ROAD SLABS
37
COMPANY PROFILE
PRODUCTION OF SOUND BARRIERS
Cutting machine
38
COMPANY PROFILE
REFERENCES in pre-stressed concrete sleeper factories and technology CUSTOMER NAME
COUNTRY
YEAR
MAIN CHARACTERISTICS
IANNARILLI
ITALY
1994
Fixed plant 25 sleepers/hour
CEVIP
ITALY
1996
Fixed plant 75 sleepers/hour
VIANINI
ITALY
19961997
Fixed plant 140 sleepers/hour
VIBROBETON
CROATIA
19971998
Fixed plant 70 sleepers/hour
ICEP
ITALY
19971998
Fixed plant 75 sleepers/hour
LODOVICHI
ITALY
19971998
PIZZAROTTI
ITALY
1998 2003 2005
SINTA
TURKEY
1999
Fixed plant 25 sleepers/hour
EDILE FERROVIARIA
ITALY
1999
Fixed plant 90 sleepers/hour
MARGARITELLI ITALIA
ITALY (Chivasso)
2000
Mobile plant 14 bearers/hour
MARGAPLAN Post-tensioned system
MARGARITELLI ITALIA
ITALY (Casoli)
2001
Mobile plant 75 sleepers/hour
MARGAPLAN Post-tensioned system
MARGARITELLI ITALIA
ITALY (Rodallo)
2003
MARGARITELLI ITALIA
ITALY (Rodallo)
2003
MARGARITELLI ITALIA
ITALY (Rodallo)
2004
TRAVERSUD (PIZZAROTTI-LODOVICHI)
ITALY
2005
Fixed plant (renovation & upgrading) 90-130 sleepers/hour Fixed plant (renovation & upgrading) 70-120 sleepers/hour
PRODUCTION SYSTEM Pre-tensioned system (button headed wires with end anchor plates) Pre-tensioned system (button headed wires with end anchor plates) Pre-tensioned system (button headed wires with end anchor plates) Pre-tensioned system (button headed wires with end anchor plates) Pre-tensioned system (button headed wires with end anchor plates) Pre-tensioned system (button headed wires with end anchor plates) Pre-tensioned system (button headed wires with end anchor plates) Pre-tensioned system (button headed wires with end anchor plates) Pre-tensioned system (button headed wires with end anchor plates)
Fixed plant (1st production line) 90 sleepers/hour Fixed plant (2nd production line) 60 bearers/hour Fixed plant (3rd production line) 90 sleepers/hour
MARGAPLAN Post-tensioned system
Fixed plant 140 sleepers/hour
Pre-tensioned system (button headed wires with end anchor plates)
MARGAPLAN Post-tensioned system
MARGAPLAN Post-tensioned system
39
COMPANY PROFILE
LODOVICHI
ITALY
2005
Fixed plant 6.6m bearers plant
Pre-tensioned system (button headed wires with end anchor plates)
MARGARITELLI ITALIA
ITALY (Casoli)
2005
2 slabs/hour (ballastless track system)
Reinforced
THEMOS
GREECE
2005
Mobile plant 40 sleepers/hour
Pre-tensioned system (improved adhesion wires)
ICEP
ITALY
2006
Fixed plant 100 sleepers/hour
Pre-tensioned system (button headed wires with end anchor plates)
PRECON
SPAIN (Alcazar de San Juan)
2006
Fixed plant 125 sleepers/hour
PRECONPLAN Post-tensioned system
LEONHARD MOLL (INFRAFER)
GERMANY (ALGERIA)
2007
Mobile plant 50 sleepers/hour
Reinforced
ITALSLEEPERS
ITALY
2007
Fixed plant 100 sleepers/hour
MARGAPLAN Post-tensioned system
HIS INDUSTRIES
PAKISTAN
2007
Mobile plant 50 sleepers/hour
Pre-tensioned system (improved adhesion wires)
YAPI MERKEZI (ROCLA CONCRETE TIE)
TURKEY (U.S.A.)
2008
Mobile plant 50 sleepers/hour
Pre-tensioned system (button-head wires with end anchor plates)
VOSSLOH FASTENING SYSTEMS (CXT, LB FOSTER)
GERMANY (U.S.A.)
2008
Mould design
6-gang moulds for long-line plant
PRECON
SPAIN (Venta de Baños)
2007
Fixed plant (renovation & upgrading) 40-90 sleepers/hour
PRECONPLAN Post-tensioned system
SILVERY DRAGON
CHINA
2007
Plant for the manufacture of reinforcement
Pre-tensioned system (improved adhesion wires)
MARGARITELLI ITALIA
FRANCE
2009
Moulds
MARGAPLAN Post-tensioned system
YAPIRAY
TURKEY
2009
Mobile plant 50 sleepers/hour
SAF SLEEPERS (AL-MOBTY)
SAUDI ARABIA
2009
Mobile plant 80 sleepers/hour
LODOVICHI
ITALY
2009
Plant for the manufacture of reinforcement
RAIL TECHNOLOGIES
INDIA
2010
Casting systems
Pre-tensioned system (improved adhesion wires)
TOO NORD PROM
KAZAKHSTAN
2010
Mobile plant 68 sleepers/hour
Pre-tensioned system (button-head wires with end anchor plates)
Pre-tensioned system (button-head wires with end anchor plates) Pre-tensioned system (button-head wires with end anchor plates) Pre-tensioned system (button-head wires with end anchor plates)
40
COMPANY PROFILE
Mobile plant 50 sleepers/hour
ASTALDI
ALGERIA
2011
Reinforced
BETELTRANS
RUSSIA
2011
SALCEF-SIEGWART
EGYPT
2011
Mobile plant 50 sleepers/hour
MARGAPLAN Post-tensioned system
METABET
ROMANIA
2012
Mobile plant 64 sleepers/hour
Pre-tensioned system: - button-head wires with end anchor plates
PROMTRANS
KAZAKHSTAN
2012
Mobile plant 80 sleepers/hour
Pre-tensioned system (improved adhesion wires)
TOO NORD PROM
KAZAKHSTAN
2012
Mobile plant 68 sleepers/hour
TRACK EXPERTS (PORR-MABA)
SERBIA (AUSTRIA)
2012
Mobile plant 50 sleepers/hour
ITISA
MEXICO
2013
Mobile plant 75 sleepers/hour
PRECONPLAN Post-tensioned system
ITISA
MEXICO
2013
Renovation & upgrading
Dywidag post-tensioned system
MARGARITELLI (CONDOTTE)
ITALY (Catania) (ALGERIA)
2013
Fixed plant 100 sleepers/hour
MARGAPLAN Post-tensioned system
EVRASCON
AZERBAIJAN
2014
Mobile plant 25 sleepers/hour
Pre-tensioned system (improved adhesion wires)
FRONTERA
ARGENTINA
Work in progress
Mobile plant 60 sleepers/hour
Pre-tensioned system (improved adhesion wires)
ACKERSTEIN
ISRAEL
2015
Fixed plant 80 sleepers/hour
Pre-tensioned system (improved adhesion wires)
ROCLA CONCRETE TIE
U.S.A.
Work in progress
Mobile plant 50 sleepers/hour
MARGAPLAN Post-tensioned system
MARGAPLAN Post-tensioned system
Pre-tensioned system (button-head wires with end anchor plates) Pre-tensioned system (button-head wires with end anchor plates)
41
COMPANY PROFILE
REFERENCES in precast factories and technology TYPE OF PRODUCT CUSTOMER NAME
COUNTRY
AMADON HUNGARY
Hungary
AREA PREFABBRICATI
Italy
ARGA NAVES INDUSTRIALES
Spain
BARRIKADA
Russia
BENTINI COSTRUZIONI
Algeria
BORGIONI PREFABBRICATI
Italy
BUILDING SYSTEM
Russia
C.S.P. PREFABBRICATI
Italy
CALDANA
Italy
CENTRO ITALIA PREFABBRICATI
Italy
CO.PAR.FIN.
Italy
COOPERATIVA DI COSTRUZIONI
Italy
DELTA SUD
Italy
EDILCEMENTO
Italy
EDILGORI PRECOMPRESSI
Italy
ESCOSA
Costa Rica
FBM
Italy
F.C.M.
Italy
F.I.M.
Italy
FORNACI SCANU
Italy
FRATELLI BIGNAMI
Italy
G.R. INDUSTRIES
Belgium
GAGE BROTHERS
USA
GALAZZO PREFABBRICATI
Italy
GENERALE PREFABBRICATI
Italy
STRUCTURES
HOLLOWCORE
ROOFING
PANELS
x x
SPECIAL PRODUCTS
x
x
x x x x
x
x
x x x x x x x x x x
x x
x
x
x x
x
x x
x x x x x x
x 42
COMPANY PROFILE
CUSTOMER NAME
COUNTRY
GHEDEM PRE-CAST
Eritrea
GOMELSKIY DSK
Belarus
HORMY MECO
Spain
IAPITER
Italy
IMA PRECOMPRESSI
Italy
IMPRESA PIZZAROTTI
Italy
INPES PREFABBRICATI
Italy
IPA PRECAST
Italy
ITALBLOCK
Italy
ITALPREFABBRICATI
Italy
L.C.A. FUTURE SYSTEMS
Italy
L.I.M.A.
Italy
“LSR.ZHELEZOBETON-SZ”
Russia
MC-MANINI PREFABBRICATI
Italy
MC PREFABBRICATI
Italy
MABO PREFABBRICATI
Italy
MAGNETTI BUILDING
Italy
MAGNETTI PREFABBRICATE
Romania
MAPID
Belarus
MANINI PREFABBRICATI
Italy
MANINI PREFABBRICATI LAZIO
Italy
MONOLIT RESURS
Russia
OAO “ZKD”
Russia
OFFICINE PICCINI
Italy
PAMA PREFABBRICATI
Italy
PIK INDUSTRIES
Russia
PREFAB.I
Italy
PREFABBRICATI PUGLIESI
Italy
PRE-FORM
Italy
STRUCTURES
HOLLOWCORE
ROOFING
PANELS
SPECIAL PRODUCTS
x x x x x x x x x x x x
x
x x x
x x
x
x
x
x
x
x x
x
x x x
x x x
x
x x
x x x
x x
x x
x x
x
43
COMPANY PROFILE
CUSTOMER NAME
COUNTRY
PRELESA
Spain
PRETENSADOS INDUSTRIALES (SINERCON)
Dominican Republic
PROFER SYSTEM
Italy
PREP
Italy
QATAR PRECAST
Qatar
R.D.B. CENTRO
Italy
REKON IZHORA
Russia
RESTUCCIA COSTRUZIONI
Italy
S.I.C.E.P.
Italy
S.I.C.E.P TUNISIE
Tunisia
SAM ENGINEERING
Italy
SARBI
Russia
SERIO PREFABBRICATI
Italy
SHEBH AL JAZERA
Saudi Arabia
ST.I.ARM
Italy
STROITELNIY TREST â„– 13
Belarus
STRONG & MIBET EPITOELEMGYAR
Hungary
SU-155
Russia
TAV
Romania
TAV SOLAI
Italy
TECNYCONTA
Spain
TRAVISUD
Italy
TROST
Germany
VALLEMME PREFABBRICATI
Italy
VEGA PREFABBRICATI
Italy
VIBROBETON
Croatia
VIBROCEMENTO
Italy
VIBROSUD
Italy
VIPRE COSTRUCOES
Brazil
WEILER ITALIA
Italy
STRUCTURES
x x x x
HOLLOWCORE
x x x x x x x
ROOFING
PANELS
x
x
x
x
SPECIAL PRODUCTS
x x x x x x x x x x x x x x x x
x x
x x x
x x x
x
44