R&M Module Cat6A EL «easylock»

Module Cat6A EL «EasyLock» Christian Schaer, Product Manager Wetzikon, 18.8.2014

Cat6A EL «EasyLock» •

Completely redesigned Cat6A module variant with a specially installation friendly termination concept

•

The module consists of two handling parts only • RJ45 jack with contact set, compensation and integral IDC block • Wire guide for easy preparation of the wires

•

Integrated termination function

•

Integrated strain relief function

•

Available in shielded (diecast) and unshieleded (AlienNEXT reducing plastic) version

Sales Presentation Modul Cat6A EL

Properties Meets Cat.6A acc. Component standards IEC 60603-7-41 and IEC 60603-7-51 Suitable for class EA acc. ISO/IEC 11801 and EN 50173-1 Fast and tool less termination (no special tools) Intuitive, easy handling

short break in phase

Wide cable diameter range (4,5mm - 9mm) Integrated strain relief Suitable for all usual wire diameters: Solid wire:

AWG 26/1 - AWG 22/1

Stranded wire:

AWG 26/7 – AWG 22/7

Re-termination > 4x Suitable for POE and POEP Full traceability during production Made in EU

Sales Presentation Modul Cat6A EL

Reliable performance Certificates from independent lab’s: 3P Third Party Testing, Denmark 4 connector channel (all common cable constructions) 3 connector Permanent Link (all common cable constructions)

Component level Cat.6A according IEC 60603-7-41 / -51

Sales Presentation Modul Cat6A EL

100% quality • Each module is marked with production date and serial number • All modules are tested by automated test equipment (RL / Next / Voltage proof) • All test results are stored and are traceable to individual modules • Process control with statistical analytics (prediction and preventive activities)

Sales Presentation Modul Cat6A EL

R&Mfreenet integration The Cat.6A EL module fits seamlessly into the R&Mfreenet system.

It fits into the R&Mfreenet platforms and all accessories are compatible.

Specifically suitable to for the new R&MinteliPhy-ready 24-Port 1HE PC 19� panel

Sales Presentation Modul Cat6A EL

etz.

The extremely small form factor of the RJ45 jack in combination with different adaptors, allows the module to be also integrated into most faceplate programs of third party vendors.

min. H

Fully Compatible

Sales Presentation Modul Cat6A EL

Functional strain relief A safe, reliable strain relief prevents changes of the transmission parameters during operation no re-testing needed

Cpar

Mpar

Sales Presentation Modul Cat6A EL

Sophisticated shield termination Reliable shield termination EMC protection over the whole lifetime of the system: 360째 shield termination due to contact inlay in clamping ring Special, additional contact point for drain wire of foil only cables

Sales Presentation Modul Cat6A EL

Built in Alien-NEXT protection The housing of the UTP module is manufactured from a special plastic material that reduces crosstalk from one module to the next (Alien-NEXT).

This way can be mounted without required minimal distances and without any further special protection measures.

Microslice of housing

CT of housing (w/o plastic)

Sales Presentation Modul Cat6A EL

Positioning

Sales Presentation Modul Cat6A EL

Module positioning

High Performance

Easy handling Reliability

10Gbit/s +

Up to 10 Gbit/s

Highest reserves in performance

Up to 1GBit/s

Best in handling

Unsurpassed reliability

Fast, easy and efficient termination

Extremely robust

Safe standard compliance

Residential, SOHO and Hotels

Normal office environment

10GBit/s under tough conditions and next generation apps HD (48 ports / 1U) DC, HQ buildings

Sales Presentation Modul Cat6A EL

System positioning Transmission performance Module

Channel

Cat.6A Cat.6A EL Cat.6 Cat.5

Class EA Class EA Class EA Class D

Permanent Link Class EA Class EA Class E Class D

Short Link / Margin Yes No No No

Component standard Cat.6A Cat.6A Cat.6 Cat.5

Sales Presentation Modul Cat6A EL

Customer advantages Fast and easy termination end customer

lower cost and lead time for installer and

100% production tested first time right on transmission testing termination time and re-testing expenses Wide range of allowable cable and wire diameters applications (incl. CP-cable)

reduces re-

one module for all

Integrated, fully functional strain relief reliable data transmission even after mechanical stress on the installation, no re-testing necessary Sophisticated shield termination reliable EMC protection of the whole lifetime of the system, suitable for all cable construction types Short form installation guide printed on package

available all the time

Extensive warranty (5 years product / 25 years system) Keystone- /Adapter No1 for 3rd party faceplates

investment protection

freedom of choice Sales Presentation Modul Cat6A EL

Product portfolio Module /s/u single packed in 10x / bulk packed in 100x units: •

With Freenet / Snap-In / Keystone / Adapter No1 or without adapter

Populated 19’’ patch panel /s/u: •

1HE 16P/ 1HE Angled 24P/ 1HR 24P PC (grey and black) / 2HE Global 48P / 3HE Global 48/60P

CP Cable /s:

Trunk cable /s:

- Configured

- Configured

Accessory:

Optional opening tool:

Cable reduction ring

Sales Presentation Modul Cat6A EL

Page 15

Further information Product flyer «Cat.6A EL Modul» R330312 Data sheet Cat.6A EL Online catalog «Universe» http://universe.rdm.com/de/Default.aspx Extended installation guide Installation movie shielded and unshielded www.youtube.com/user/ReichleDeMassariAG Speed installation movie (S/FTP cabling) www.youtube.com/user/ReichleDeMassariAG Sales Presentation Modul Cat6A EL

Page 16

Questions??

Sales Presentation Modul Cat6A EL

Page 17

Many thanks!

Christian Schaer Product Manager christian.schaer@rdm.com www.rdm.com

Sales Presentation Modul Cat6A EL

Page 18