Portfolio / Soffian Hashim by Soffian Hashim

PORTFOLIO COMPILATION WORKS 2011 - 2019 SOFFIAN HASHIM

Islamic College of Melbourne Victoria Entry Ramp / Stairs / Decking Design Documentation

LEGEND Synthetic turf

Existing retaining wall. 05 -

Existing demountable building.

04 -

TMB-01 Existing chain link fencing

BAL-01 Balustrade

Continuous top track fixed to existing fencing midrail.

P EX

EXP

700 typ.

P P

Stainless steel pos to engineer's deta

Stainless steel flat bar to both side of ramp.

TAC-01

Stainless steel flat bar to both side o ramp.

TMB-01

Concrete slab to engineer's details.

TMB-

Deck and ramp structure 05 to engineer's details.

TMB-01

A402 A401

A402

2mm thick plate to engineer's details.

A402

HR-01

Concrete slab to engineer's details.

2mm thick plate to engineer's deta

Existing retaining wall footing.

03 -

02fenceSECTION Chain link to match existing. Stairs and Scale 1 : 50

1:100 Fall

Ramp up 1:14

6 x Risers at 180mm typ.

Existing retaining wall footing.

HR-01

1:100 Fall

04 A402

TUF-01

Existing fence.

HR-01

Existing precast panel.

900 typ.

P P

Ramp up 1:14

BAL-01

A402

BAL-01

300 Typ. Going

300 300 50 min min

1100 Clear

1000

Existing fencing post

Future shade structure column. 1:100 Fall

03 -

BAL-01

concrete paving.

Post to engineers details

Planter box with retaining wall.

180 Typ. Riser

HR-01

NSG-01

TMB-01

Extend of chain post to support link meshNew to be removed.sliding gate fixed to

900 typ.

1100 Clear

HR-01 Ramp up 1:14

Existing chain wire fencing.

Existing mid rail.

700

TAC-01

Tactile

Handrail

HR-01 P

200

BAL-01

Sliding Gate

02 A400

SECTION DETAIL

Stair Detail

SECTION Ramp and Decking

Scale 1 : 50

A400

Scale 1 : 10

SECTION DETAIL Post to Bearer Scale 1 : 10

Remove top sleeper and cut steel solder.

Packer as required.

Light post.

Step up

3100 Clear

TAC-01

TAC02

02 -

Existing concrete sleepers.

NSG-01 typical to all step and deck edging.

TMB-01

New Post.

Existing footing.

Ramp, Decking , Stairs and Gate Existing footing.

Future shade structure post. Existing motorized gate.

A400

Scale 1 : 50

HR-01

1100 Clear

Deck and ramp structure to engineer's details.

Step up

P P

HR-01

04 ELEVATION

NSG-01 typical to all stair edging.

HR-01

Elevation

TMB-01

Existing sleeper post.

TAC02

Packer as required. Existing fencing post.

2mm thick plate to engineer's details.

Existing concrete sleepers.

300 75 min

2mm thick plate to engineer's details.

BAL-01

New sliding gate G01 as detailed.

2 3 4 HR-01

TMB-01

700 typ. 900 typ.

Remove chain link fence to mid rail. Remove bottom rail and top row of sleepers. Allow to cut cteel solder.

Stainless steel flat bar to both side of ramp.

Existing demountalbe building.

NSG-01 typ.

Deck and ramp sturcture to engineer's details.

Stainless steel flat bar to both side of ramp.

Stainless steel posts to engineer's details.

Existing concrete paving.

HR-01

Existing lower rail.

10 Clear

Stainless steel posts to engineer's details.

TAC02

Existing chain wire fencing.

Deck and ramp structure to engineer's details.

Existing concrete paving.

New Post.

04 -

Line of concrete slab under.

TMB-01

Planter box with retaining wall.

TAC-02

CONC-01

Remove base rail to gate opening.

Allow for track to be fixed to decking and concrete slab.

700

NSG-01 typical to all step and deck edging.

1:100 Fall

TAC-01

200

1110 Clear

Bored piers footing to engineer's details.

Existing chain link fencing.

TAC-01

TUF-01

Line of concrete slab under.

Existing fence.

Existing kerb.

Planter box retaining wall.

01 A400

SECTION DETAIL

Deck and Court Junction

A400

Scale 1 : 10

Light post.

SECTION DETAIL

Deck and Court Junction

A400

Scale 1 : 10

SECTION DETAIL

Step in Deck

A400

Scale 1 : 10

Existing concrete sleepers. EX

Existing bitumen. Sliding Gate

Existing Gate

05 -

Scale 1 : 50

Existing stairs and handrail.

900 typ.

Entry Ramp,Stairs and Decking

700 typ.

100

300 300 min min

PLAN

100

6 x Risers at 180mm typ.

A402 TMB-01

TMB-01

Existing retaining wall.

Planter box retaining wall. 06 A402

05 -

SECTION Ramp, Decking , Stairs and Gate Scale 1 : 50

9/10/17

Issued for Pricing

4/9/17

Issue to Consultants

ISSUE

DATE

REVISION

0mm

50mm

100mm

DO NOT SCALE FROM DRAWING. USE FIGURED DIMENSIONS ONLY. CHECK ALL DIMENSIONS ON SITE BEFORE MANUFACTURE OR CONSTRUCTION.

AR C HIT EC T U RE IN T E RI O RS M AST ERP LA NNIN G

PROJECT

CLIENT

ICM Entry Ramp and Stairs

PROJECT #

DWG #

2705

Ex. Auto Ticket Mach.

Existing wall to be demolished.

EX. Game Mach.

Entry Portal

2x Val Morgan screens to be removed.

Sheet over existing roller shutter.

Existing screen to be retained. Ex. Store To be demolished to make way for new open framed door.

Existing B&J's sign and existing finish to remain.

7160 COS

Design Development and Documentation

01 -

Existing HWS to be removed/ relocated.

Demolition Plan

Existing return air duct to be relocated to ceiling.

Entry Portal, Foyer - Level 2 Scale 1 : 50

Existing bulkhead to be demolished.

Ex. Auto Ticket Mach.

Patch and repair wall where existing wall is removed.

CFT02 Black entry tile to entry tile ingo.

MC01 Finish to underside and rear of new bulkhead.

Existing bulkhead to remain.

EX. Game Mach.

MC01 Black gloss finish cladding on new wall, WL03 (entry portal frame.)

08 MC01 Black gloss finish cladding on new wall, WL03 (entry portal frame.)

Existing bulkhead to remain. 590

Patch and repair ceiling.

AL Alum pow Conc

670 1890

Access panel locations TBC on site. AP01 RSD01 New roller shutter to extent of opening.

Lighting to underside of new bulkhead to lighting designers specs. Refer to A105.

980 ex.d oo

975

2660

HOYTS Broadway New South Wales

To be decommissioned.

Existing floor tiles to be removed.

Line of existing bulkhead to be adjusted.

Ex. Store

CFT05 New tiles to be laid on top of existing tiles.

MC Black cladd

AP01

New backlit Hoyts signage.

New opened framed door for storage entry.

340 porta l frame

Paint return air duct to match ceiling finish.

7145 open ing

02 -

340 porta l frame

Proposed Plan

AL02 Aluminium trim with powdercoated finish, PC03 junction between existing timber lining and new tile finish. Concealed fixing.

AL Alum pow Conc

MC Black cladd

Entry Portal, Foyer - Level 2 Scale 1 : 50

7835 670

7165

340

New Hoyts backlit signage. Power by contractor as required. New signage supplied by Hoyts.

Ex. bulkhead to be retained.

PT01 Black paint finish to match existing mall ceiling finish. TBC with Hoyts.

MC01 Black gloss finish cladding.

LT04 strip light New fitting. Refer to consultant drawings for details.

AFFL 3800 COS

Ex. black timber lining and signage to be retained.

AFFL 2290 COS

AFFL 2290

Ex. Ben & Jerry's signage to be retained. Ex. screen to be retained.

MC01 Black gloss finish cladding.

Ex. timber lining to be retained.

Existing B

RSD01 New roller shutter door.

Ex. door to be retained.

PC03

FFL 0 PC03

Proposed Elevation 03 Proposed Elevation B -

Proposed Entry Portal, Foyer - Level 2 Scale 1 : 50

NOTES: 1. Refer to A000 - Cover Sheet, Legend + Scope for all codes, symbols, specification and general notes. 2. Layouts and dimensions as shown are indicative only. All dimensions, heights and levels to be confirmed on site prior to any works. 3. Refer to SH01, SH02 & SH04 for all finishes and equipment selections. 4. Refer to to consultant drawings for power, data and hydraulic requirements

400

AP03

WCPT01

To all entry tunnel walls. CFT04

EX-WCPT

+0 RL122.200

Walkway 1:20

CPT02

LTF06

Scale: 1:100

2200

CS01

2200

3000 Crossover

CS01

2565

2035

HDRL02

CS01

CS01 CS01

CS01

10940

CS01

01/A450 CS01

CS01

CS01 CS01

+3400

CS01

+2815

04/A303

CS01 CS01

WHC

LTW03

WHC

CS01 CS01

+1645

02/A450

CS01

CS01 LTW03

CS01

+2230

CS01

LTW03

CS01

WHC

+1060

CS01

HDRL02

CS01

08/A450

CPT02

Existing concrete ramp to be retained.

Walkway 1:20

+280 LTF06

-85

R 135875

1230 aisle

CS01

Cinema 2 Xtreme

Scale: 1:100

g li

mit

CPT02

CS01 CS01

CS01

-110 HDRL02

-305

02/A303

-500

R 128335 R 125185

A451

DEMOLITION PLAN

win

LTF06

1100 aisle

1800

03/A303

150 Wall Panel

EX-CRTN

Both sides.

CS01

vie

04/A450

CS01

CS01 CS01

CS01

1100 aisle

CS01

WHC

CS01

05/A303

Existing exit doors and walls to remain typically. (shown dashed).

CS01

Design Development and Documentation

CS01

LTW03

CS01

WHC

CS01

CS01 CS01

lim

CS01

LTW03

1700 Min Clear

CS01

1700 Min Clear

CS01

CS01 CS01

CS01

g in

07 -

CS01

01/A303

w vie

EX-CPT

Existing platform carpet to be removed typically.

CS01

03 -

CS01

2195

Ex. timber framed platforms to be demolished.

CPT02

850 Min Clear

CS01

South Australia

PLAN

R 121850

Cinema 2 Xtreme Scale: 1:100

All existing downlights to be removed. Make good of ceiling.

Existing ceiling to be retained.

All existing wall and cleaners lights to be removed (both sides). Locations indicative only.

Existing screen masking curtains and blend wall to be retained. Refer note at A001.

All redundant existing ceiling downlight openings to be patched and painted PT11

Existing rear wall lining to be demolished. Make good and prepare for new wall panels.

2600 LTW04

4500 LTW04

3000 SPK01

Ceiling Bulkhead AFFL +6890

4900 LTW04

3000 SPK01

4900 LTW04

3000 SPK01

5400 LTW04

4500 SPK01

Ceiling Bulkhead AFFL +6890

36° LNG02 New acoustic panels. Contractor to allow for plywood backing plates to align flush to face of new full height plywood lining and ex. cols. Refer A451 for detail.

EX SPK EX SPK

LTW04 LTW04

WSPK03

DEMOLITION SECTION

Cinema 2 Xtreme

SECTION Ex. Female

WCPT01

WSPK03 WSPK03

02 A450

WSPK03

08 A450

Toilets2 Xtreme Cinema A420's for detail.

Crossover Platform AFFL +280

WCPT01

A450

HDRL02

Scale: Refer 1:100

Scale: 1:100

Feature light

6000

FFL +0 Rear Platform AFFL FFL +3400 -500

Feature light

300 Min.

WCPT01

Ex. Foyer FFL +0

900 Typ.

LTW04

Feature light

A450

LTW04

WSPK03

4000

Crossover Platform Bio Box AFFL +280 AFFL +3400 Ex. Foyer

5900

FFL -500

Cinema blend wall. Refer note at A001.

LTW04

4000

Ex. Foyer

Ex. Female Toilets Refer A420's for detail.

4850

U/side conc. slab CeilingAFFL Bulkhead +2610 COS AFFL +6890

PT11

4000

All existing speaker to be removed (both sides). Refer note at A001.

Ex. Female Toilets Refer A420's for detail.

Ex. timber framed platforms to be demolished.

PT01

4000

EX SPK

FFL +0

LNG02

EX SPK U/side conc. slab AFFL +2610 COS

Typical feature wall halo light 4 ° mounted to acoustic panels. Contractor0to confirm detail with Hoyts prior to manufacture

Bio Box New acoustic panels. Refer 01/A452 AFFL +4560 Contractor to allow for adequate supportRear for speakers Platformto be fixed back to AFFL cinema wall. +3400

EX SPK

3500

Bio Box AFFL +4560

4000

Existing wall lights to be removed.

6000

Cinema Boxes

CPT02

1100 aisle

CS01

CPT03

Existing screen, masking and blend wall to be retained.

CPT02

6210

CS01

1670

16975 O/A COS

2200

CS01

1745

Cinema 2 Xtreme - Entry

28760 O/A Internal Length COS

1230 aisle

150 Wall Panel

105

6. Pricing Option: Ex Upgrade where ne

Allow to retain and relocate all existing lighting and services. Entry downlights to be relamped.

RCP

1230 aisle

Cinema 2 Xtreme - Entry Scale: 1:100

Scale: 1:100

HOYTS Westfield Tea Tree

4. CS01 Seat Type: V

5. Pricing Option: Cu acoustic rear wall

1100 aisle

Cinema 2 Xtreme - Entry

PLAN

EX Cinema 3 Store

DEMOLITION PLAN

3. All platform steps NSG02 (green, X-t

5595 Walkway CPT02

Existing wall and double doors to be demolished. Make good and prepare for new finishes. -

1 0 EB

A500

CPLB01 PT11 2500AFFL

150

EX-PB

EX. Wall Light

All entry tunnel walls.

1230 aisle

EX-CPT

2. Refer to SH01 & SH and equipment de LTF06

1695

EX-SAP

1845 New ceiling

TR01

625

EX FHR

EX-CPT

Refer to A000 & A

J19

EX. HW

BIN02

EX-PB

1300

-F

new tunnel wall. WM

EX FHR

300 Min. WCPT01

G F

21/6/18 2/3/18

Issued fo Issued fo

E D

23/2/18 20/12/17

Issued fo Issued fo

C B A

7/12/17 16/11/17 30/10/17

Issued to Issued fo Issued fo

ISSUE

DATE

REVISION

0mm

FFL -500

DO NOT SCALE FROM DRAWING. U CHECK ALL DIMENSIONS ON SITE B

01 A302

ELEVATION NOTES:

Cinema 2 Xtreme- Side Wall Scale: 1:100

AR C HIT EC T U RE IN T E RI O RS M AST ERP LA NNIN G

Speakers layout on left side wall to mirror on right side wall of theatre.

pmdl.com.au

02 A452 Ceiling Bulkhead AFFL +6890

Wall light on tunnel wall side to PMDL ARCHITECTURE + DESIGN HK (LIMITED) mirrorPMDL setout on platform side of ABN 56 062 961 317 ARCHITECTURE + DESIGN PTY LTD NSW NOMINATED ARCHITECTS:theatre. ANDREW PENDER 5317 DAVID MORRIS 5865 PETER DODDRELL 5134

PROJECT

CLIENT

DWG

02 E Hoyts Tea Tree A302 C

Hoyts Corpora

Details - Cinem

CLIENT REF & CONTACT

Westfield Tea Tree Plaza

All existing doors and door frames to be removed. All existing partitions to be demolished.

Allow to scabble back floor substrate under vinyl as required to ensure level bedding for all tiling. Existing walls to be removed.

Existing floor tiles to be demolished. Make good floor to receive new finish.

Allow to scabble back floor substrate under vinyl as required to ensure level bedding for all tiling.

All existing doors and door frames to be removed.

Existing floor tiles to be demolished. Make good to receive new finish.

1000 Existing wall to be demolished.

All existing partitions to be demolished. Notes:

Refer A000 and A001 for leg scope outline.

EX-VNYL

1.Existing fixtures and fittings including:

Ex. Male Toilets EX-CFT

EX-CFT

HOYTS Westfield Tea Tree

EX-FW

Ex. Female Toilets EX-CFT EX-FW

Ex. Acc WC

EX-FW

EX-CFT

Ex. Cleaners Room

All existing floor waste location to remain unless noted. Refer to note 5.

EX-CFT

Ex. Parents Room

EX-FW

Make good, reuse connection cap & seal if not required. Ma surfaces as returned to suit n power to suit new location in

EX-CFT

South Australia

2. All HDRY01 to be at 900m All fixtures and fittings to be removed. Refer to note 1.

Male Toilets Scale: 1:50

1200 Acc. Entry

review if update required.

PT01

D14

GR02 WC02 TRH01

SIM.

PT01

D12

16 -

HDRY01

SIM.

Parents Room CFT03

D12

750

365

FW01 BSN01 TAP01 SD01 MIR02

UR01 PAR02 Typ.

FW01

TRH02 Typ. WC01

06/A431 SIM.

HDRY01 PAR01 Typ.

Male Toilets

Ambulant Cubicle

700 Min. Ambulant

PT01

CFT03

6. EX-FW reuse existing pene Remove existing coverplate. U

CFT03 12

FW01 TRH01

TRH02 WC01

7. All partition doors to be fit HK01, centered rear door. HK AFFL.

1000 Min. Clear

8. All drainage to be conceale walls. Any exposed traps to h

9.Indicative mirror panel divis Contractor to review on site. 10. All toilet walls are CWT01 walls, CWT02.

WC03 GR01

625

HDRY01

2450

CFT03

FW01

SD01 TAP02 BSN02 MIR02 HDRY01

2050

Access. Unisex WC

365

FW01

HK01

HDRY01

SIM.

540

PT01

D14

MW02

WC05

450

HDRY01

WC01 Typ.

GR01

TRH02 Typ.

CFT03

Existing falls to floor wastes to remain typically.

1700

Cleaners Room SK01 TAP04

5. Refer to lighting consultan drawings for details.

1000

PT01

D12

PT01

TRH01 WC03

AL01 Typ.

PT01

1810

D11

500

PT01

CFT03

PT01

Signage Typ.

800

1000

PT01 PT01

19 18

17 -

PT01

1025

CFT03

PT01

Female Toilets

Signage Typ.

1450

AL01 Typ.

Existing falls to floor wastes to remain typically.

PAR01 typ.

600 HDRY01

6450 1720

2650 Ambulant

3855

GR01

1655

4.Existing light fittings to rela Light consultants and electric

06/A431 SIM. 700 Min. Ambulant

1000 Min. Clear

1000 Female Entry 1415 500 200 Min.

Ambulant Cubicle

2600 Ambulant

2055 COS 600

3.Existing flush plasterboard Provide new paint finish. Refe

All fixtures and fittings to be removed. Refer to note 1.

1000 Min. Clear

Amenities

All existing floor waste location to remain unless noted. Refer to note 5.

DEMOLITION PLAN

09 A106

PT01

Female Toilets

425

DEMOLITION PLAN

01 A106

Scale: 1:50

01 570 COS

EQ1

750 Typ. EQ2

4510

02 A108

EQ2

570 COS

EQ2

800

590 COS

3390 COS

A542

590 COS

2035

3520 COS

PROPOSED PLAN

A108

CWT01

Ceiling Level +2400 AFFL

03 -

610 Typ. +0 FFL

CWT01

ELEVATION New Vanity

SD01

Scale: 1:50

TAP01 BSN01

950 Typ. 1200 Typ.

CWT01

LAM04 Typ.

485

ELEVATION

New Urinals

Scale: 1:50

Ceiling Level +2400 AFFL

300

Vanity top +800 AFFL

SSM01 to new vanity. Provide framing as required to support vanity & basins.

CWT01

+0 FFL

990

PAR02

CWT01

Ceiling Level +2400 AFFL

CWT01

UR01

MIR01 800 Typ.

AP02

+1200 AFFL

Zone for position of toilet paper dispenser shown hatched.

MIR02 SD01 TAP01 BSN01 Typ.

Concealed cistern in wall.

210

UR01

300

PAR02

CWT01 HDRY01

920 Clear Ambulant

CWT01

MIR01 CWT01

+1200 AFFL

860

Ceiling Level +2400 AFFL

+2000 AFFL

MIR01

585 COS

EQ3

CWT01

+2000 AFFL

WC01

TRH02

HDRY01

+0 FFL

615

ELEVATION

New Vanity

300 Max.

ELEVATION Parents Room Vanity Scale: 1:50

Scale: 1:50

Ceiling Level +2400 AFFL

CWT01

PT01

eq CWT01 CWT01

PAR01 new toilet partitions as scheduled.

TAP04

+1000 AFFL

850

920

TRH01

WC01

500 +0 FFL

WC03

+0 FFL

WC05

1000

+0 FFL

GR01

895

+0 FFL

750 Typ. EQ3

Male Toilets

Ceiling Level +2400 AFFL

585 COS

5970

Scale: 1:50

Ceiling Level +2400 AFFL

1405

2725

PROPOSED PLAN

Female Toilets Scale: 1:50

850

990 MIR02

EQ1

800 BSN01 900 SD01

EQ1

700 max.

835 Typ. EQ1

920 Clear Ambulant

Tiling/Paint extent as shown to extend to side walls.

SK01

+0 FFL

04 TYPICAL SECTION 05 -

Toilet Vanity

ELEVATION

Scale: 1:20

Female Toilets

Scale: 1:50

ELEVATION

Adult and Junior WCs

Scale: 1:50

PT01

ELEVATION Cleaners Room Scale: 1:50

Substrate

PT01

CWT02

Wall stud Ceiling Level +2400 AFFL

CWT01

990

Zone for position of toilet paper dispenser shown hatched GR02

+0 FFL

ELEVATION Accessible Unisex WC Scale: 1:50

TRH01

+0 FFL

AL02 AL03 to protect corners typically

CWT01

PT01

MIR02

Substrate

AL03

Wall stud

CWT01

Wall stud

PT01

CWT02

AL02

TAP02 BSN02

SD01

Substrate

AL03 to protect corners typically

CWT01

Substrate

AL03 to protect corners typically CWT01

+0 FFL 800

HDRY01

WC02

800 GR02 700 max.

800 975

GR02 WC02

Ceiling Level +2400 AFFL

800 100 900 SD01

Ceiling Level +2400 AFFL

460 140

Design Development and Documentation

- Handbasin -Tap -Soap Dispenser -Hand Dryer -Existing WC -Partitions -Existing Urinal Trough -Baby Change Tables -Vanity Joinery

EX-FW

07 -

300 Max.

ELEVATION Accessible Unisex WC Scale: 1:50

16 08 -

ELEVATION

DETAIL PLAN Corner Wall Detail Scale: 1:5

17 -

DETAIL PLAN Corner Wall Detail Scale: 1:5

18 -

DETAIL PLAN Corner Wall Detail Scale: 1:5

19 A432

DETAIL PLAN Corner Wall Detail Scale: 1:5

30/4/18

Issued for Con

ISSUE

DATE

REVISION

0mm

Accessible Unisex WC

DO NOT SCALE FROM DRAWING. USE FIG CHECK ALL DIMENSIONS ON SITE BEFOR

Scale: 1:50

AR C HIT EC T U RE IN T E RI O RS M AST ERP LA NNIN G

PROJECT

CLIENT

DWG

pmdl.com.au

PMDL ARCHITECTURE + DESIGN HK (LIMITED) PMDL ARCHITECTURE + DESIGN PTY LTD ABN 56 062 961 317 NSW NOMINATED ARCHITECTS: ANDREW PENDER 5317 DAVID MORRIS 5865 PETER DODDRELL 5134

Hoyts EQ

Hoyts Corporatio Details - L2 - Ex.

CLIENT REF & CONTACT

DATE

SCAL As S

35715 23220 1875

3600 150

EXISTING COLUMN

1950 1000

800

2290

1200

1600

1000 1200

4100

800

6360

1530

7870

NBN

DRY STORAGE SHELVES 4100 X 500

BENCH

2290 X 800

2000

EXISTING ROLLER DOOR

NBN

DRY STORAGE

OFFICE / STORAGE

1000

PROPOSED TBC & NBN RELOCATION

EXISTING COLUMN

1140

100

3480

800

150 550 500

OPEN REFRIGERATED DISPLAY 11070 X 870

2200

The Butcher Club Watergardens Shopping Centre

1000

3680

1795

11170

1645

12495 1465 100

700

1610 REFRIGERATED GRAB AND GO 3854 X 870

REFRIGERATED GRAB AND GO 3854 X 870

LEASE LINE

100 580

100

6320 7505

980

4685 X 800

REFRIGERATED FRIDGE 3802 X 1125

100

7605

1400

11470

800

3455

150

3000

155

5800

150

2610

15560

100

SCALE 1: 100 REV. DATE -

ISSUE & AMENDMENTS

18.12.19 ISSUED PRELIMINARY SET TO LANDLORD

INI.

THE BUTCHER CLUB

PRELIMINARY ISSUE

TENANCY 182 WATERGARDENS SHOPPING CENTRE

BLACK POWDERCOATED ALUMINIUM SIGNAGE WITH CUT OUT LETTER WHITE OPAL ACRYLIC FINISH. INTERNALLY ILLUMINATED

LEASE LINE

PROPOSED SYMBOL IN M1 TO BE FIXED TO TM1 FINISH

ϱ͘ /ƚ ŝƐ ƚŚĞ ĐŽŶƚƌĂĐƚŽƌΖƐ ƌĞƐƉŽŶƐŝďŝůŝƚǇ ƚŽ ŽďƚĂŝŶ ĂƉƉƌŽǀĂůƐ ĨƌŽŵ ĂƉƉƌŽƉƌŝĂƚĞ ĂƵƚŚŽƌŝƚŝĞƐ ŝŶĐůƵĚŝŶŐ ůŽĐĂů ĐŽƵŶĐŝů ĂŶĚ ǁĂƚĞƌ ďŽĂƌĚ ĨŽƌ Ăůů ĂƌĐŚŝƚĞĐƚƵƌĂů ĂŶĚ ƐƚƌƵĐƚƵƌĂů ĚŽĐƵŵĞŶƚĂƚŝŽŶ͘ ϲ͘ DĞĂƐƵƌĞŵĞŶƚƐ ĨŽƌ ƚŚĞ ĨĂďƌŝĐĂƚŝŽŶ ŽĨ ƐĞĐŽŶĚĂƌǇ ĐŽŵƉŽŶĞŶƚƐ ƐƵĐŚ ĂƐ ǁŝŶĚŽǁƐ͕ ĚŽŽƌƐ͕ ŝŶƚĞƌŶĂů ĨƌĂŵĞƐ͕ ƐƚƌƵĐƚƵƌĂů ƐƚĞĞů ĐŽŵƉŽŶĞŶƚƐ ĂŶĚ ƚŚĞ ůŝŬĞ͕ ĂƌĞ ŶŽƚ ƚŽ ďĞ ƚĂŬĞŶ ĨƌŽŵ ƚŚĞƐĞ ĚŽĐƵŵĞŶƚƐ͘ DĞĂƐƵƌĞŵĞŶƚƐ ŵƵƐƚ ďĞ ƚĂŬĞŶ ŽŶ ƐŝƚĞ ƚŽ ƐƵŝƚ ƚŚĞ ǁŽƌŬ ĂƐ ĐŽŶƐƚƌƵĐƚĞĚ͘ ϳ͘ ůů ƐƚƌƵĐƚƵƌĂů ĐŽŵƉŽŶĞŶƚƐ ƐŚĂůů ďĞ ŝŶ ƐƚƌŝĐƚ ĂĐĐŽƌĚĂŶĐĞ ƚŽ ĚĞƚĂŝůƐ ĂŶĚ ƐƉĞĐŝĨŝĐĂƚŝŽŶƐ ĂƐ ƉƌĞƉĂƌĞĚ ďǇ Ă ƐƚƌƵĐƚƵƌĂů ĞŶŐŝŶĞĞƌ͕ ĂŶĚ ƚŚŽƐĞ ĚĞƚĂŝůƐ ĨŽƌŵ ƉĂƌƚ ŽĨ ƚŚĞ ƚŽƚĂů ƐƉĞĐŝĨŝĐĂƚŝŽŶ͘ ϴ͘ ůů ĂƌĐŚŝƚĞĐƚƵƌĂů ĚŽĐƵŵĞŶƚĂƚŝŽŶ ĂƌĞ ƚŽ ďĞ ƌĞĂĚ ŝŶ ĐŽŶũƵŶĐƚŝŽŶ ǁŝƚŚ ƚŚĞ ƐƚƌƵĐƚƵƌĂů ŶŐŝŶĞĞƌΖƐ ĚĞƚĂŝůƐ͕ ƐƉĞĐŝĨŝĐĂƚŝŽŶ ĂŶĚ Ăůů ŽƚŚĞƌ ƌĞůĂƚĞĚ ĚŽĐƵŵĞŶƚƐ͘

DRAWING TITLE

PROPOSED FLOOR PLAN DRAWN BY

DRAWING SCALE

PROJECT N°

AS SHOWN @A3

4493

M1 FRAME WITH GL1 INFILL REFER TO DETAIL

WD-100

DS09 307 M1

500

GL1

DWG N°

REVISION

PROPOSED SYMBOL IN M1 TO BE FIXED TO TM1 FINISH LEASE LINE

ϭ͘ Ž ŶŽƚ ƐĐĂůĞ ĚƌĂǁŝŶŐƐ͕ ĨŝŐƵƌĞĚ ĚŝŵĞŶƐŝŽŶƐ ĂƌĞ ƚŽ ďĞ ĨŽůůŽǁĞĚ͘ ůů ĚƌĂǁŝŶŐƐ ĂƌĞ ŝŶ ŵŝůůŝŵĞƚĞƌƐ͘ Ϯ͘ ŽƉǇƌŝŐŚƚ ŽĨ ƚŚĞƐĞ ĚƌĂǁŝŶŐƐ ĂŶĚ ƌĞůĂƚĞĚ ĚŽĐƵŵĞŶƚƐ ƌĞƐĞƌǀĞĚ ďǇ ƚŚĞ ĚĞƐŝŐŶĞƌ͘ ϯ͘ ůů ĚŝŵĞŶƐŝŽŶƐ ĂƌĞ ƚŽ ďĞ ĐŽŶĨŝƌŵĞĚ ŽŶ ƐŝƚĞ ďǇ ƋƵĂůŝĨŝĞĚ ƉĞƌƐŽŶƐ͕ ĂŶǇ ŝŶĐŽŶŐƌƵĞŶĐŝĞƐ ŵƵƐƚ ďĞ ƌĞƉŽƌƚĞĚ ƚŽ ƚŚĞ ĂƉƉƌŽƉƌŝĂƚĞ ĂƵƚŚŽƌŝƚǇ͘ ϰ͘ /Ŷ ƚŚĞ ĞǀĞŶƚ ŽĨ ĞŶĐŽƵŶƚĞƌŝŶŐ ĂŶǇ ĚŝƐĐƌĞƉĂŶĐŝĞƐ ŽŶ ƚŚĞƐĞ ĚƌĂǁŝŶŐƐ͕ ƐƉĞĐŝĨŝĐĂƚŝŽŶƐ Žƌ ĨƵƌƚŚĞƌ ŝŶƐƚƌƵĐƚŝŽŶƐ ŝƐƐƵĞĚ͕ ƚŚĞ ďƵŝůĚĞƌͬƐƵďĐŽŶƚƌĂĐƚŽƌ ƐŚĂůů ĐŽŶƚĂĐƚ ƚŚĞ ĚĞƐŝŐŶĞƌ Žƌ ĂƉƉƌŽƉƌŝĂƚĞ ĂƵƚŚŽƌŝƚǇ ďĞĨŽƌĞ ƉƌŽĐĞĞĚŝŶŐ ǁŝƚŚ ĂŶǇ ǁŽƌŬ͘ ϱ͘ /ƚ ŝƐ ƚŚĞ ĐŽŶƚƌĂĐƚŽƌΖƐ ƌĞƐƉŽŶƐŝďŝůŝƚǇ ƚŽ ŽďƚĂŝŶ ĂƉƉƌŽǀĂůƐ ĨƌŽŵ ĂƉƉƌŽƉƌŝĂƚĞ ĂƵƚŚŽƌŝƚŝĞƐ ŝŶĐůƵĚŝŶŐ ůŽĐĂů ĐŽƵŶĐŝů ĂŶĚ ǁĂƚĞƌ ďŽĂƌĚ ĨŽƌ Ăůů ĂƌĐŚŝƚĞĐƚƵƌĂů ĂŶĚ ƐƚƌƵĐƚƵƌĂů ĚŽĐƵŵĞŶƚĂƚŝŽŶ͘

GL1

TL3

2300

2700 AFFL

400

1255 X 1050

PROPOSED FLOOR PLAN

01 STANDARD NOTES:

4000 AFFL

3640

BENCH

REFRIGERATED FRIDGE 3802 X 1125

1180

3785

6980

TRAY RACK

1200

BENCH

3785 X 800

BENCH

3785 X 800

BENCH

1500

1900

1950 500 550

DRY STORAGE SHELVES

REFRIGERATED FRIDGE 3802 X 1125

CW/SW/TW LOCATION

BENCH

REFRIGERATED GRAB AND GO 3854 X 870

M2 MESH ABOVE

REFRIGERATED FRIDGE 2456 X 1125

1400

MERCHANDISING 1600 X 870

PROPOSED COLUMNS

DISPLAY SHELVES

MERCHANDISING DISPLAY

1740

Design Development and Documentation

150

2 TIERS DISPLAY

4000

2 TIERS DISPLAY

1300

FREEZER 8.74m² -20C°

4685

2 TIERS DISPLAY

CLOSURE SYSTEM ABOVE

SERVERY DISPLAY 12515 x 1400

1620

2 TIERS DISPLAY

MERCHANDISING 1600 X 870

2 TIERS DISPLAY

1550

4335

13815

BULKHEAD / SIGNAGE

M2 MESH ABOVE

Interior Fitout

3785 X 800

BENCH

3785 X 800

REFRIGERATED GRAB AND GO 3854 X 870

1200

REFRIGERATED GRAB AND GO 3854 X 870

SHELVES

AGED REFRIGERATED DISPLAY 4000 X 800

REFRIGERATED GRAB AND GO 3854 X 870

1550

REFRIGERATED GRAB AND GO 3854 X 870

MERCHANDISING 1600 X 870

1640 POS

800 DISPLAY SHELVES

1740

Victoria

MERCHANDISING DISPLAY

1950

1900

HANGING RAIL

COOL ROOM 43.16m² -2° to 0°

TL2

100

TM1

1900

1200 AFFL

TM1

TL3

TL2

FFL

200

900 AFFL

INTERTENANCY WALL AND RETURN BY LANDLORD

A 105

ELEVATION A SCALE 1: 50

TL3

CONTINUOUS 200mm SKIRTING IN M2 FINISH.

CUSTOM POS JOINERY UNIT TO BE FINISHED IN M1 & M3 FRAME & TM1 TO FACE. ST1 TO COUNTER TOP. HINGED DOOR IN L1 FINISH. ALL INTERNAL CARCASS IN BLACK MELAMINE FINISH. REFER TO DETAIL

01 301

100x100mm RHS FULL HEIGHT COLUMN. ENSURE BASE PLATE CONCEALED BENEATH LEVEL FLOOR FINISH. ALL POS AND REFRIGERATED SERVICES TO BE RUN WITHIN COLUMN

01 300

CUSTOM POS JOINERY UNIT TO BE FINISHED IN M1 & M3 FRAME & TM1 TO FACE. ST1 TO COUNTER TOP. HINGED DOOR IN L1 FINISH. ALL INTERNAL CARCASS IN BLACK MELAMINE FINISH. REFER TO DETAIL

100x100mm RHS FULL HEIGHT COLUMN. ENSURE BASE PLATE CONCEALED BENEATH LEVEL FLOOR FINISH. ALL POS AND REFRIGERATED SERVICES TO BE RUN WITHIN COLUMN

CONTINUOUS 200mm SKIRTING IN M2 FINISH.

MOOSHG Design Thesis Located on the moon with no restriction of laws, lies an architecture based on rhythm and music. The idea is to study one’s mind experiencing through music, exploring their darkest secrets and a journey which challenges one’s morality in search of their wildest pleasures.

1. MOOSHG 2. Physical study models are based on a study of rhythm and intensity of Daft Punk’s music. 2a. Iteration 1 2b. Iteration 2 2c. Iteration 3 2d. Iteration 4

FIX! Unconcious Collective

Dark Park

Signolot

Exotika B

Radiant Electron

Kitchen

Krumbles

Purge Hot House

3. Axonometric diagram of individual spaces and primary, secondary and sub-secondary circulation. 4. Sectional drawing

Triune House Single Dwelling A condensed house designed with interchangable spaces an with intention of hightening intimacy through atmospheric elements such as light, shadow and sound.

James Cook Library Sustainability is the main design approach for the James Cook Library. It optimizes natural ventilation whilst promoting night flushing by orientating it perpendicularly to the crosswind. This is to counter the harsh dry climate in Queensland and minimise the usage of artificial cooling.

Skydge Skyscraper Design A structural construction concept with a notion of pushing the boundaries of typical skyscraper construction methods and celebrating it by exposing the exo-skeleton of the tower - external spine with braced frame and outrigger system. In addition, it has an active hexagonal modules facade system which changes in size individually allowing controlled daylight for the users.

1. Phase One Housing Development Medan, Indonesia Engaged by the design team of AJM Planning and Urban Design Group based in Kuala Lumpur Malaysia to plan and provide visualization works for a phase one of a housing development in Medan, Indonesia.

2. Pop- Up Market Kuala Lumpur, Malaysia Pitching in a deisgn proposal to GDP Architects junior design team on turning an old carpark into a pop-up market at Jalan Ampang, Kuala Lumpur, Malaysia.