RFID CONNECTIVITY TIPS AND TRICKS
GENERAL INFORMATION
• PAIR THE HANDHELD WITH THE CORRESPONDING SLED (MATCHING NUMERICAL STICKERS)
• LINE UP THE BACK OF THE HARDWARE DEVICE WITH THE SLED AND TWIST TO THE RIGHT UNTIL IT CLICKS IN PLACE
• ENSURE THAT BOTH PIECES ARE POWERED ON
• BE PATIENT, THE BLUETOOTH LIGHT ON THE LEFT SIDE OF THE SLED WILL FLASH AS IT PAIRS TO THE MOBILE DEVICE
• CLOSING OUT THE CLARITY APP WILL CAUSE THE SLED TO DISCONNECT, THIS IS PART OF THE PROGRAM WIFI CONNECTIVITY
• IF THE WIFI DOES NOT CONNECT, CLICK THE GEAR ICON TO OPEN THE SETTINGS SCREEN
• TAP THE WIFI OPTION
• CONNECT TO ANY AVAILABLE NETWORK THAT YOU HAVE ACCESS TO
• ONCE YOU ARE SUCCESSFULLY CONNECTED, REBOOT THE DEVICE
• ONCE YOU ARE REBOOTED, CLICK THE SETTINGS ICON, THEN WIFI
• SCROLL TO THE BOTTOM OF THE SCREEN TO SELECT SAVED NETWORKS
• SELECT ASRFID
BLUETOOTH PAIRING
• IF THE MOBILE DEVICE DOES NOT PAIR TO THE SLED, CLICK THE GEAR ICON TO OPEN SETTINGS
• TAP THE BLUETOOTH OPTION
• TAP +PAIR NEW DEVICE
• HOLD IN THE BLUETOOTH BUTTON ON THE LEFT SIDE OF THE SCANNER
• TAP PAIR ON THE SCREEN
• HOLD IN THE TRIGGER ON THE SLED UNTIL THE RFID READER BEEPS
BARCODE SCANNER NOT SCANNING
• TAP THE SETTINGS OPTION, THEN SELECT BLUETOOTH
• ENSURE THAT RFD8500 AND BARCODE ARE LISTED AS A CONNECTED DEVICE
• IF YOU DO NOT HAVE BOTH CONNECTIONS SHOWING, TAP THE BLUE CONNECT SYMBOL UNTIL THE SYMBOL TURNS RED
