Anchors Anchors
Anchor Bolts • Concrete Anchors • Façade Anchors • General Hardware & Ties • Geotechnical Anchors Masonry Anchors • Post-Tensioning • Reinforcing Anchors • Utility Anchors
DYWIDAG – Systems International GmbH
Phone: +49 8231 96 07 0 Email: geotechnik@dywidag-systems.com Web: www.dywidag-systems.com/emea Product: GEWI® and GEWI® Plus® Bar Anchors, Strand Anchors, Soil Nails, DYWI® Drill Hollow Bars Description: DYWIDAG – Systems International (DSI) DSI offers a complete system of ground and rock anchors, soil nails and micropiles for geotechnical applications. GEWI Piles and DYWI Drill hollow bars are well respected as innovative solutions worldwide.
Halfen USA
Phone: 800-423-8140 Email: info@halfenusa.com Web: www.halfenusa.com Product: HTA Anchor Channels Description: An ideal cast-in solution to replace post installed anchors and weld plates. HTA Anchor Channels are ICC Approved and provide a high level of adjustability to accommodate large concrete tolerances. Load resistance provided in tension and shear. Available in stainless steel and hot dip galvanized.
Hardy Frame
Phone: 800-754-3030 Email: dlopp@mii.com Web: www.hardyframe.com Product: Hardy Frame Anchoring Solutions Description: Hardy Frame pre-engineered anchorage details for Unreinforced, Reinforced and Back-toBack Reinforced Anchorage Solutions are available to download. Embed details are also available for Z4 continuous tie-down systems. Details are organized to be used as supplemental sheets for plan submittals.
Heckmann Building Products, Inc.
Phone: 708-865-2403 Email: info@heckmannanchors.com Web: www.heckmannanchors.com Product: Pos-I-Tie® ThermalClip® Description: A masonry anchor accessory designed to reduce thermal conductivity through masonry walls. The innovative and effective design of the ThermalClip adds thermal-break technology to all of the advantages of the Original Pos-I-Tie Veneer Anchoring System!
Hilti, Inc.
Phone: 800-879-8000 Email: us-sales@hilti.com Web: www.us.hilti.com Product: Hilti Mechanical, Chemical and Cast-InPlace Anchors Description: Full line of anchors for concrete and masonry construction including KB-TZ Stud Anchors, KH-EZ Screw Anchors, HCI Single Point Cast-In-Anchors, Hilti Anchor Channels, HIT-HY 200 and HIT-RE 500 V3 Chemical Anchors.
Hohmann & Barnard, Inc.
Phone: 800-645-0616 Email: weanchor@h-b.com Web: www.h-b.com Product: 2-Seal Thermal Anchors Description: Innovative anchors engineered to create a thermal break in the wall cavity, reducing heat transfer. Dual diameter washers seal BOTH the insulation and air barrier while stainless steel barrels and a UL-94 coating transfer one-seventh the thermal energy of traditional anchors. Results backed by 2D and 3D thermal testing. A MiTek - BERKSHIRE HATHAWAY COMPANY
Product: 2-Seal Thermal Wing Nut Anchor Description: Uses a stainless steel barrel and a proprietary UL-94 coating to reduce heat transfer in the wall cavity to one-seventh of traditional zinc barrel anchors. The wing portion is reinforced with a steel core which will not fail in a fire like typical clip-on plastic wings.
Hubbell Power Systems, Inc.
Phone: 573-682-8709 Email: clwitting@hubbell.com Web: www.abchance.com Product: CHANCE Helical Piles Description: Used worldwide to secure deep foundation applications such as residential and commercial buildings, tower foundations, soil retention projects, and heavy equipment foundations.
IES, Inc.
Phone: 800-707-0816 Email: info@iesweb.com Web: www.iesweb.com Product: VAConnect Description: Steel base plates and shear tabs too are what we will design for you. Those anchor ‘calcs’ (Appendix D) are also dealt with easily.
Kelken Construction Systems
Phone: 732-416-6730 Email: ken@kelken.com Web: www.kelken.com Product: Keligrout Structural Adhesive Description: Superior high strength polyesterresin anchoring material works in temps of zero degrees, and in and under water. Keligrout provides guaranteed pullout values exceeding ACI-349-85.
RISA Technologies
Phone: 800-332-RISA Email: info@risa.com Web: www.risa.com Product: RISABase Description: When accuracy counts, RISABase delivers. RISABase uses an automated finite element solution to provide exact bearing pressures, plate stresses, and anchor bolt pull out capacities, eliminating the guess work of hand methods. Define bi-axial loads and eccentric column locations. Choose from several connection types and specify custom bolt locations.
STRUCTURE magazine
23
SCIA, Inc – a Nemetschek Company
Phone: 410-207-5501 Email: info@scia.net Web: www.scia.net/baseplate Product: SCIA Base Plate Check Description: A free software that makes it easy to check all required limit states of AISC 360-10 Specification Section J (base plates) and ACI 318-11 Appendix D (anchorage). The output is completely transparent so you can see and verify the mathematics.
Simpson Strong-Tie
Phone: 800-925-5099 Email: web@strongtie.com Web: www.strongtie.com Product: Drop-In (DIAB) Internally Threaded Anchor Description: Improved geometry in the preassembled expansion plug provides better setting capability so the anchor installs with 40% fewer hammer strikes. DIAB anchors feature a positive-set marking indicator at the top of the anchor, helping you identify proper installation. Product: Titen® 2 Concrete and Masonry Screw Description: Patented undercutting threads make installation easier and increase load capacity. Improved thread design undercuts the base material more efficiently, reducing installation torque and making it easier to drive without binding, snapping or stripping.
Trimble Solutions USA, Inc.
Phone: 770-426-5105 Email: kristine.plemmons@trimble.com Web: www.tekla.com Product: Tedds Description: Automating your everyday structural designs, Tedds’ broad library includes anchor bolt design per ACI 318 Appendix D. The calculation includes comprehensive checks for tensile and shear failure of anchors and is available as part of a free trial at the website. Product: Tekla Structures Description: Tekla is an Open BIM modeling software that can model all types of anchors required to create a 100% constructible 3D model. Anchors can either be created inside the software or imported directly from vendors that have 3D CAD files of their products.
Wej-it High-Performance Anchors
Phone: 203-857-2200 Email: sales@toggler.com Web: www.wejit.com Product: Wej-it High-Performance Anchors Description: Wej-It produces a wide range of high-quality light duty, mechanical, and adhesive anchoring products for hollow and solid substrates.
Trade Show in Print 2016
