Supply Post - August 2022 by Supply Post Newspaper

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER · SUPPLYPOST.COM

VOL. 51 · NO. 8

Family Owned Since 1971

Scan for more info

AUGUST 2022

POWERSCREEN HL75 FEEDER

2016 TIGERCAT 880 PROCESSOR

2021 JOHN DEERE 75G EXCAVATOR

2019 JOHN DEERE 850L LGP

Mint condition. Comes with Waratah HTH 624C processor head. See page 53 for more information.

Low Hours, c/w Thumb & Aux Plumbing, C/U & Dig Bkts, Steel Tracks, Blade, warranty, see pg 50 for more info. $149,900

Organic Hopper-Feeder-Conveyor 56” reversible feeder. Can reach a height of 30’. See page 51 for more information.

Like new! Comes with Topcon grade control GPS. Only 2200 hours. See page 49 for more information.

LINKPARTSLTD.COM · dave@infinitywest.ca DAVE: (604) 240-7977

CENTRAL ISLAND RENTALS + SALES 250-268-7123 · info@centralislandrentals.com

FOREMAN EQUIPMENT · 1-888-852-9021 info@foremanequipment.com

HIGH ROAD EXCAVATING LTD. keith@highroadexltd.com · 604-838-0339

YANMAR

Marvellous Minis!

Looking for the Classifieds section? We moved it to

Page 49

so we could add more stuff!

Meet Yanmar’s Largest Mini Excavators: ViO80-1A & SV100-2A. See page 38.

Supply Post · supplypost.com

August 2022

HORIZE UT

Page 2

DEALER

You build the best roads. We provide the right machines.

August 2022

Supply Post · Our Readers Are Your Buyers

Page 3

4204 42 Ave., Innisfail, AB

CALL TODAY! 1-844-470-4608

2010 JOHN DEERE 135D EXCAVATOR, STK #2677, Encl. Heat & A/C Cab, (Isuzu) 4-Cyl. Diesel, Pro Heat Option, B/U Camera, 93 HP, Reduced Tail Spin, Hyd. Q/C, 5,984 lb Lift, 19’9 Dig Depth, 28” Tracks, 24” Tooth Bucket, 12,139 Hrs .... ......................................................................... $74,500.

2005 VOLVO ECR 38 MINI EXCAVATOR, STK #2735, Yanmar Diesel, Block Heater, Heated Cab, 2-Spd., Aux. Hydraulics – Plumbed for Thumb, Hyd. Q/C, Counter Weights, Stereo, 23” Tooth Bucket, 65” Push Blade, 2,667 hrs ....... $44,500.

2014 VOLVO MC85C SKID STEER, STK #2802, JCB/ Kohler Diesel, Block Heater, Heat & A/C, 2-Spd., Aux. Hydraulics, Hydraulic Q/C, 66” Smooth Bucket, Side Entry, 1,326.2 Hrs. ..............................................................................................$42,500.

2020 CATERPILLAR 259D3 SKID STEER, STK #2768, Cat Diesel, A/C & Heated Cab, 2-Spd., Block Heater, Auxiliary Hydraulics, Hyd. Quick Connect. 74” Dig Bucket, 1,893 hrs. ...................................................................$75,500.

2014 TEREX PT-30 TRACKED SKID STEER, STK #2797, Perkins Diesel, Block Heater, Heat/A/C, Auxiliary Hydraulics, Manual Quick Connect, 4’ Smooth Bucket, 2,098.8 Hrs........................................................................................$29,500.

2015 BOBCAT S-590 SKID STEER, STK #2762, Doosan Diesel, Block Heater, Heated & A/C Enclosed Cab, 2-Speed, Auxiliary Hydraulics, Hydraulic Quick Connect, Selectable Controls, 1,787.1 hrs .......................................................$51,500.

2014 JLG G12-55A TELESCOPIC FORKLIFT, STK #2769, (Cummins) Diesel, Auto., Heat & A/C, Aux. Hyd., Manual Q/C, 12,000 lbs. Lift, 55’ Reach, C/w Fork Attachment, 6,440.4 Hrs ......................................................................$137,500.

2015 GENIE GTH-5519 TELESCOPIC FORKLIFT, STK #2761, Deutz Diesel, Automatic, Block Heater, Heat & A/C, Aux. Hyd., Manual Q/C, 5,500 lbs. Lift, 18’ Max Lift Height, 11’ Max Horz. Reach, 3-Way Steering, Counter Weights, 4,175.4 Hrs. ..............................................................................................$76,500.

2004 RAYCO C87FM TRACKED MULCHER TRACTOR, STK #2778, Heat & A/C, Aux. Hyd., Manual Q/C, Counterweights, Steel Tracks, Rr. Winch, 55” Cutting Head, 4,350 Hrs.........................................................................................$47,500.

2007 Case 580 SUPER M BACKHOE, STK #2770, Case Diesel, Automatic, A/C & Heated Cab, 2-Spd., Aux. Hydraulics, Manual Q/C. Counter Weights, Block Heater, 17” Rear Frost Bucket, 82” Front Loader Bucket, 6695.6 hrs ...... ......................................................................................... $52,500.

2018 HYBRID HB-1430 SELF-PROPELLED SCISSOR LIFT, STK #2744, 20’ Working Height, 670 lbs Platform Capacity, 50.1 hrs............................................$13,500.

2011 SKYJACK SJ7127 SCISSOR LIFT, STK #2757, 4WD, Dual Fuel, 27’ Max Platform Height, 1,500 lbs Lift, Outriggers, 2,497.6 hrs....................................................$32,500.

2006 SKYJACK SJ8841 SCISSOR LIFT, STK #2754, 4WD, Dual Fuel, 41’ Max Platform Height, 1,700 lbs Lift, Outriggers, 1821.5 hrs....................................................$23,500.

2012 SKYJACK SJ6832 SCISSOR LIFT, STK #2765, 4WD, Kubota Diesel, 38’ Working Height, 32’ Platform Height, 1,000 lbs Lift, Outriggers, 1,757.8 hrs ........................$34,500.

2012 GENIE Z60/34 ARTICULATING BOOM LIFT, STK #2718, Deutz Diesel. PAS, Block Heater, Generator, Foam Tires, 75 HP, 500 lbs Lift, 60’ Platform Height, 36’ Horizontal Reach, 6,442.5 hrs ...........................................................$48,500.

2012 GENIE S65 STRAIGHT BOOM LIFT, STK #2608, 4WD, Deutz Diesel, Block Heater, 65’ Platform Height, 56’ Horizontal Reach, Positive Air Shut Off, 500 lbs Lift, 4,197 Hrs........................................................................................$53,500.

2013 GENIE S85 STRAIGHT BOOM LIFT, STK #2764, Deutz Diesel, 4×4, Block Heater, Generator, Counter Weights, 85’ Max Platform Height, 76.5’ Max Horizontal Reach, 500 lbs. Platform Capacity, 90’ Max Working Height, 8’ Basket, 3460.6 hrs ...............................................$73,500.

2008 GENIE S125 STRAIGHT BOOM LIFT, STK #2786, Deutz Diesel, Block Heater, Generator, 4×4, 125’ Max Platform Height, 80’ Max Horz. Reach, 500 lbs. Platform Weight Capacity, 1,672.4 Hrs ......................................................$71,500.

SALSCO 810M CHIPPER, STK #2759, 10”H x 18”W infeed opening, Hyd. feed roll, Impeller safety lockout, Infeed tray safety apron & bar, 360° rotational exhaust chute .........$33,500.

2005 CATERPILLAR 304CR MINI EXCAVATOR, STK 2008 SWAMP TRAXX, STK #2123, Driven,Aux. Aux, #2734, (Cat) Diesel, Encl. Heated & A/CHydrostat. Cab, 2-Spd., Powered Tracks, 30,000Counter lbs payload cap.,50” OverC/U 28”Bucket, Wide D-Dent Hydraulics, Hyd. Thumb, Weights, 22” Tracks, Licensed as a Blade, Trailer 3,049.3 the Swamp Traxx are easily pulled Tooth Bucket, 78” Push Hrs.................$44,500 and meet road ban requirements ..................................$31,000.

2014 MAGNUM MLT4060 LIGHT TOWER, STK #1867, 6 KW, 7,663 Hrs....................................................$6,000.

2013 WACKER NEUSON LTN 6K LIGHT TOWER, STK #1367, 6 KW, Kubota Engine, 1,477 Hrs., 4 Options to choose from .........................$8,000.

2014 OMEGA 2414-10 FORKLIFT, STK #2774, Perkins Diesel, Block Heater, 4×4, Side Shift, Fork Positioner, Fork Clamp, 10,000 lbs. Lift, 14’ Lift Height .. .....................................................................................$57,500.

2019 KUBOTA SVL75-2 SKID STEER, STK #2782 (Kubota) Diesel, Block Heater, Heat & A/C, 2-Spd., Auxiliary Hyd., Hydraulic Q/C, Hi-Flow, Counterweights, 72” Smooth Bucket, Stereo, 1,562 hrs ..............................................$76,000.

FOR COMPLETE INVENTORY www.groundhogsales.com

Page 4

Supply Post · supplypost.com

August 2022

682 Okanagan Ave. E., Penticton, BC, Canada

1-866-344-6480

cturchak@brutusbodies.com

YOUR TRUCK BODY BUILDING SPECIALISTS

Brutus Truck Bodies and Maranda have joined forces to offer the �irst composite-aluminum crane bodies for the North American service truck market. These premium quality bodies utilize Maranda pure resin composite cabinets and doors to withstand the harsh Canadian winter conditions, while advanced Brutus aluminum crane structures allow for rooftop mounted Cobra service cranes or rear workbench mounted Maxilift folding cranes.

Brutus Truck Bodies also offers the complete Maranda product line of composite transferable canopies for all truck manufacturers with 6’, 6 ½’, and 8’ pickup boxes

www.brutusbodies.com

August 2022

Supply Post · Our Readers Are Your Buyers

woodlandequip.com

Page 5

RECENT TRADE-INS* READY TO WORK

cstanley@woodlandequip.com

ATTACHMENTS Used

Used

Call us first for all your attachment replacement parts.

QS630 Processor, 6500 Hours.

✓ Southstar ✓ Quadco

WBM Butt-n-top grapple, 1500 hours.

✓ Waratah ✓ Logmax

Used QS600

Used IMAC

Used Quadco

Southstar

Power

QFH24C

processor

Grapple,

bunching

6 SQ Ft Tines,

w/ install kit.

head,

9000 hours.

S/N: QS600-105.

360 rotation,

4000 hours.

3850 hours.

MACHINES Eltec 277L Feller Buncher, c/w Quadco QFH24C saw head. 2800 hrs. Eltec LL317L log loader c/w Trend TR40 power grapple. 2300 hours, S/N: 0139.

S/N: 0098.

Hyundai R210LC-9HW c/w Waratah HTH622B, 17,000 hours .......................................... $99,900.

Eltec FH277L Harvester, c/w Southstar QS600, 9365 hours, S/N: 0084.

Hyundai HL760-9 wheel loader, S/N: 0209, 4254 hours.

Hyundai HL770-7A Wheel Loader, S/N: 0114, 5059 hours.

CALL TODAY FOR PRICING! KAMLOOPS Phone: 877-372-2855 Fax: 250-374-2844

CRANBROOK Phone: 250-489-6131 Cell: 250-417-6884

PRINCE GEORGE Phone: 877-561-2456 Fax: 250-562-6353

VERNON Phone: 877-542-2280 Fax: 250-542-2674

FORT ST. JOHN Phone: 250-787-1789 borsetti@woodlandequip.com

Page 6

Supply Post · supplypost.com

866-413-3350m s a l e s @j p h e q u i p . c o m

We ship to you! USA & Worldwide!! Financing available! 2019 Caterpillar CP54B Compactor, STK# 6191 JP, CAT C4.4 Engine, 131 HP, 25,000 lbs. Operating weight, 84” sheep foot, 23.1x26 tires, Heat & A/C, 96 Operating Hours.

$224,985

LOCATED IN NORTH-CENTRAL ALBERTA

2008 Deere 450D LC Tracked Excavator, STK# 6215 JPH, Isuzu engine, 348 HP, 12’10” Stick, 48” Dig bucket, Hyd. Thumb, WBM Wedge style quick attach, NPK Compactor/Hammer Hyd. Kit, 28” Tracks, 12,817 Op. Hrs.

$88,495

August 2022

ADVERTISERS INDEX Alberta Engine ...............................49

Jade Equipment ..............................1

Arrow-West ....................................18

JPH Equipment ................................6

Banning Equipment .......................53

Langley Excavator Parts .................21

B & G Parts ...................................20

Link Parts ......................................50

Bob’s Diesel ..................................49

LNH Equipment .............................50

Brandt.............................. 12, 13, 27

Lonetrack Equipment .....................29

Brandt Truck Rigging ......................42

Machinery Supply ..........................37

Brandt Value Parts.........................20

Magnum Attachments....................34

Brown International .......................54

Major Equipment Sales..................53

Brutus Truck Bodies ...................4, 33

Mormak ........................................34

Central Island Rentals & Sales.......22

Mountain Forestry..........................17

Champ’s Equipment ........................8 Chieftain Equipment ......................31 LOCATED IN SOUTHERN ALBERTA

Coastal Pacific Equipment .............52 Competition Trailer Sales .........43, 47

2019 Tigercat LX830D, STK# 6210 JP, Tigercat FPT C87 TIER 4F Engine, 330 HP, 76000 lbs. Op. Weight - Less Attachment, 24” Single Grouser Pads, A/C, Positive Air Shutoff, Fire Suppression, 4,151 Hrs.

$624,985

LOCATED IN NORTHERN BC

2013 Deere 290G LC Excavator, STK# 6169 CM, John Deere Engine, 188HP, 66,337 lbs. Op. Weight, 32” Pads, 1x 36” Dig & 1x 60” C/U Bucket, Quick Attach, Wedge, Thumb, Aux. Hyd., Pre Heater, Diesel Proheat, PAS, 8,636 Hrs.

2016 Deere 2154D Processor with 622B, STK# 6222 JF, Deere 6068H Engine, 159 HP, 61,500 lbs. Op. Weight w/o head, 27.5” Pads, Waratah 622B Head, EPA Label Present, A/C & Heated Cab, Diesel Fire Heater, 15,480 Hrs., READY to work!

2012 Deere 544 Wheel Loader, STK# 6195 BP, 163 HP, 28,660 lbs. Op. Weight, 20.5R25 Tires (all new), 104” - 3.5 yd3 Bucket, A/C & Heat, AT320163 Q/C, Aux. Hyd., ROPS, Batteries are new, 8,412 Hrs., Can’t ship to the US, made for the Canadian market.

$139,985

LOCATED IN NORTH CENTRAL AB

$209,995

LOCATED IN NORTHWEST AB

$124,985

LOCATED IN SOUTHERN ALBERTA AREA

2011 Caterpillar 160M Motor Grader VHP Plus, STK# 6196 BP, 248 HP, 35,060 lbs. Op. Weight, 17.5R25, 14’ MB, A/C & Heat, ROPS, Ripper, Push Block, Serial # Prefix: B9E, Op. Manual is Present, 8,741 Hrs.

$154,985

LOCATED IN SOUTHERN ALBERTA AREA

2009 Caterpillar 14M Grader, STK# 6213 JPH, Cat C11 Acert Engine, 274 HP, 47,000 lbs. Op. Weight, 15,620 Hrs., 20,5x25 Tires, Ripper, Front eight block, Well maintained in ready-towork condition! Snow wing also available. 2008 Kenworth T-800B Winch Truck, STK# 6185 WE, Cummins ISX engine, 550 HP, CVIP to Sept 31/22, 11R22.5 FR & 11R24.5 Rr. Tires, 4:10 Ratio, 244” WB w/ 4-way lockers, Webasto Bunk Heater/ OEM Engine Heater, 30 Ton Tulsa Winch, 20,888 Hrs., 917,560 kms.

$224,985

LOCATED IN CENTRAL ALBERTA

$91,495

LOCATED IN SOUTHERN ALBERTA

2007 Tescar CF3S Compact Hyd. Drill - Piling Drill Rig, STK# 6231 BP, Kubota Diesel Eng., 64 HP, 72’ Telescopic Kelly Bar Max Depth, 15.7” Drill diameter max & 31.4” Drill Diameter min., 9’7” H, 15’9” L, 7’2” W, 17” Pads, 7’ Blade, A/C & Heat, 2,113 Hrs. 2006 Caterpillar D7R XR II Dozer, STK# 6174 BP, 258 HP Gross, Cat 3176 Diesel eng., 57,056 lbs. Op. Weight, 7’ MS Ripper, 14’ Blade, A/C & Heat, Sweeps & Forestry Cages, Webasto Pre Heater, ROPS, Service Records Available, 9,672 Hrs. 2006 CAT 325C Crawler Excavator, STK# 6224 JF, CAT 3126 eng., 290 HP, 63,000 lbs. Op. Weight, 31.5” pads, 66” C/U & 42” Dig bucket, Quick attach, Aux Hyd., Webasto Heater, 10’5” Stick, Thumb, 75% Undercarriage, 5,679 Hrs. 2007 Caterpillar 928GZ Wheel Loader, STK# 5957 BP, 144.9 net HP, 27,140 lbs. Op. Weight, 20.5R25, 2.25 Yd. bucket, A/C & Heat, Reach at Max Lift & Dump: 9’6” (3 m), ***Unable to ship to the US***, working machine; hours may vary, 5,465 Hrs. 2012 Peterbilt 367 Combo Vac Tank Truck & 2006 Rebel Metal Fab. Vac Tank Trailer, **Selling as a Pair**, STK# 6028 BP, Cummins ISX15, 550 HP, New VIKP Tank Insp. May ‘22 (truck) & Sept ‘21 (trailer) CVIP Truck Exp. Nov ‘22 & Trailer Exp. Sept ‘22, 8,935 Hrs, 193,651 Kms.

2014 Cat D6T LGP Crawler Dozer, STK# 5876 CM, Cat C9 eng., 228 HP, 50,968 lbs. Op. Weight, Winch, 13’6” Blade, Heat & A/C, Sweeps, RV Camera, PAS, ROPS, Forestry Guarding, Recent Work: $30K in pins, bushings, & hard bar work, 5,074 Hrs., 1,371 Idle Hrs. 2015 Deere 1050K Tracked Dozer, STK# 4923 JF, John Deere PowerTech TM PSS 6135 13.5L eng., 350 HP, 28” Pads, 13’ S-U Blade, MS Ripper, Espar heater, A/C, New U/C, PAS, Powertrain & Hyd., Wty ends Aug 12/23 or 7,000 Hrs., 3,749 Hrs.

www.jphequip.com

$267,985

Continental Equipment ..................22 Danny Scott ..................................20 Darby Mfg. ....................................11 Dolphin Mechanical .......................49 DSW Equipment ............................35 Edmonton Trailer Sales ..................48

LOCATED IN CENTRAL SK AREA

Equipment Sales & Service............10 FAE Group .....................................16

$279,985

FCL Financial.................................14 Finning ............................................1 Foreman Equipment ......................25 ForesTech Equipment ....................19 Frontier Power Products .................20 Frontline Machinery .......................31

LOCATED IN SOUTH CENTRAL ALBERTA AREA

$98,995

LOCATED IN NORTHWEST AB

$79,985

Mountainside Equipment ...............50 Nor Mar Industries .....................4, 33 Norstone Excavating ......................17 Ocean Trailer .................................56 Pacific Rim Equipment.....................7 Prince George Truck .......................52 P & R Truck Centre ........................41 RLC Aggregate Equipment..............28 RMT Equipment ...............................9 Rollins ..........................................21 Rototilt ..........................................17 Royquip ........................................52 Saratoga Ventures ...........................8 Skreenquip....................................26 SMS Equipment ..............................2 The Groundworx Co. .................32, 39 TJ Logging .......................................9

Full Steam Enterprises ...................14

T-MAR Industries ...........................11

Gear Centre ...................................36

Trak Tech.......................................10

General Aggregate Equipment ........36

Trans East Trailers .........................45

Global Asset Sales ........................30

True North Equipment ....................51

Groundhog Sales & Rentals .............3

Tyalta ............................................40

Handlers Equipment ......................14

United Earth Contractors ................18

Hope Mechanical ..........................53

Vanderveldt Parts ..........................19

Infinity West ..................................50

VI Equipment.................................16

Inland Equipment ..........................15

Wally’s Private Parts ......................51

Inland Truck & Equipment..............24

Woodland Equipment ................5, 23

Interior Diesel ................................30

Wyatt’s Used Equipment ................51

NEXT DEADLINE: Friday, August 19, 2022

#105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5

LOCATED IN SASKATOON, SK

$459,985

www.supplypost.com

PHONE 604-607-5577 | TOLL FREE 1-800-663-4802 President ...................................Jeff Watson

Marketing Administration ......Jennie Stevens

Account Manager ................... Jake Peterson

Art Director/Social Media ...........Linda Horn

Managing Partner, Finance ....Debra Watson

Web & Graphic Designer ......... Lisa Schmale

CIRCULATION

LOCATED IN SOUTHERN ALBERTA AREA

$349,985

Direct Mailed copies................. 14,200 Newsstand copies........................2,200 Total distribution ...................... 16,400 Please call our office for full details

Published Monthly - Printed in Canada Publications Mail Agreement No. 40070144 Reproduction of any material including photographs and/or advertisements in whole or in part is forbidden.

The Supply Post is a proud member of the following Trade Associations:

LOCATED IN NORTH CENTRAL AB

$495,745

INTERIOR LOGGING ASSOCIATION

LOCATED IN NORTHERN ALBERTA

RETURN UNDELIVERABLE CANADIAN ADDRESSES TO CIRCULATION DEPT.: (Covers/Labels Only)

No. 105, 26730 - 56th Avenue, Langley, BC V4W 3X5

August 2022

Supply Post · Our Readers Are Your Buyers

Page 7

Phone: 250-493-4545

Fax: 250-493-8819 AFTER HRS, Joe Hewer: 250-490-6795 AFTER HRS, Dave Garnett: 250-490-7976

1698 Dartmouth Rd, Penticton, BC V2A 4B8

PACIFIC RIM SALES DIVISION 2019 HITACHI ZX200-6, 24" PADS, AIR, ONLY 1,178 HRS .............................. CALL

EXCAVATORS

2008 YANMAR VIO17, RUBBER, CANOPY, 106 +2,490 HRS .......................$19,900 2011 HITACHI ZX17U-2, RUBBER, CANOPY, BLADE, 1,554 HRS..................... CALL 2015 KOMATSU PC78US-10, 18" PADS, BOR, BLADE, ONLY 2,125 HRS ........ SOON 2016 HITACHI ZX75US-5B, 18" PADS, BOR, BLADE, Q/C, HYD. THB, 1,370 HRS.. CALL 2016 HITACHI ZX75US-5B, 18" PADS, BOR, BLADE, AIR, ONLY 1,334 HRS..... CALL 2016 CAT 308E2 CR, 18" PADS, BOR, BLADE, ONLY 2,002 HRS ...................... CALL 2009 HITACHI ZX135USOS-3, 20" PADS, AIR, BLADE, O/BOOM, 6,525 HRS .. SOON 2010 HITACHI ZX135USBL-3, 20" PADS, BLADE, 7,106 HRS .......................... CALL 2011 HITACHI ZX135US-3, 20" PADS, AIR, ONLY 4,950 HRS .......................... CALL 2011 HITACHI ZX135USBL-3, 20" PADS, AIR, BLADE, 7,611 HRS, NEW RAILS/ SPROCKETS.................................................................................................. CALL 2013 HITACHI ZX135USBL-3, 20" PADS, BOR, BLADE, DIG BKT, 4,759 HRS ... CALL 2013 HITACHI ZX135USBL-3, 20" PADS, BOR, BLADE, DIG BKT, 3,451 HRS ... CALL 2014 HITACHI ZX135USBL-5B, 20" PADS, AIR, BLADE, 6,127 HRS................. CALL 2014 HITACHI ZX135USBL-5,B 20" BOR, BLADE, ONLY 4,859 HRS ................ CALL 2014 HITACHI ZX135USBL-5B, 20" PADS, AIR, BLADE, ONLY 3,856 HRS ....... CALL 2014 HITACHI ZX135USBL-5B, 20" PADS, AIR, BLADE, ONLY 3,786 HRS ....... CALL 2014 HITACHI ZX135USBL-5B, 20" PADS, AIR, BLADE, ONLY 3,707 HRS ....... CALL 2014 HITACHI ZX135US-5, 20" PADS, AIR, 9'11" ARM, 3,600 HRS ................. CALL 2015 HITACHI ZX135US-5, 20" PADS, AIR, ONLY 4,620 HRS .......................... CALL 2014 HITACHI ZX135USK-5, 20" PADS, Q/C, HYD THB, 3,342 HRS, 2 BKTS ... CALL 2019 KOBELCO SK135SRD-5, 20" BOR, BLADE, 2 BKTS, 1,305 HRS .............. CALL 2021 HITACHI ZX135US-6, 20" BOR, SLIDE ARM, 2 BKTS, Q/C, EXTRA CWT, ONLY 982 HRS..................................................................................................$199,900 2015 HITACHI ZX200-5B, 24" PADS, AIR, ONLY 864 HRS ............................... CALL 2018 HITACHI ZX200LC-6, 32" PADS, AIR COND, ONLY 4,387 HRS................ SOON 2018 HITACHI ZX200LC-6, 32" PADS, AIR COND, ONLY 4,166 HRS ............... SOON 2018 HITACHI ZX200-6, 24" PADS, AIR, ONLY 2,800 HRS ............................. SOON

FOR SALE

2015 HITACHI ZX135USOS-5B, 20" PADS, BLADE, OFFSET BOOM, ONLY 3,084 HRS ................................................... $112,500

2019 HITACHI ZX200LC-6, 32" PADS, AIR, ONLY 4,865 HRS ........................... CALL 2019 HITACHI ZX200LC-6, 24" PADS, AIR, ONLY 2,963 HRS ........................... CALL 2021 HITACHI ZX200-6, 24" PADS, AIR, ONLY 799 HOURS............................. CALL 2012 HITACHI ZX225USLC-3, 32" PADS, AIR, MANUAL THUMB, AUX HYD, 5,651 HRS..............................................................................................................SOON 2018 HITACHI ZX225USR-6, 24" BOR, AUX HYDS, AIR, 8,045 HRS ................ CALL 2019 CAT 336 NG, 24" PADS, AIR, AUX HYD PIPING, ONLY 1,871 HRS ......... SOON 2014 DEERE 470G LC, AIR, RVC, C/WEIGHT REMOVAL, 54" DIG, 5,594 HRS .. CALL

DOZERS 2018 CAT D3K2 LGP, 6 WAY, CAB AIR, ONLY 12 HOURS, 80 HP, 20K LBS ....... CALL 2015 CAT D6K2 XL, 6 WAY, CAB AIR, MS RIPPER, 3,138 HRS, GPS READY.... CALL

LOADERS / SKID STEERS NEW YANMAR V4-7, CAB AIR, BOBTACH Q/C, .91 CU YD BKT, 250 HRS ........ CALL 2020 YANMAR V12, CAB AIR, QUICK CHANGE FORKS & 2.03 CU YD BKT ..... CALL 2009 BOBCAT S70, CAB, Q/C BKT, ONLY 1,541 HRS....................................... CALL

GRADERS / COMPACTORS 2010 CAT 140M VHP, 14 TIRES, 14'MB, SCARIFIER, CAB AIR, 4,456 HRS ...... CALL 2017 CORNIVER CT40S, 40" S. DRUM, KUBOTA ENG, FF TIRES, 573 HRS ..... CALL 2008 VOLVO SD25D, 41" DRUM DRIVE, CANOPY, 1,473 HRS, NEW BEARINGS/ SEALS IN DRUM APRIL 2022 ........................................................................ CALL 2005 ING RAND SD45D, 54" SMOOTH DRUM, CANOPY .................................. CALL 2005 ING RAND SD77F TF, 66" PADFOOT COMPACTOR, CANOPY, 3,327 HRS CALL 2016 SAKAI SW354, 47" TANDEM DRUM ROLLER, WATER SYS, 1,395 HRS .. CALL

FOR SALE

2018 CAT 323 07, HYDRAULIC THUMB HYD WEDGE Q/C, DIG BKT, 2,175 HRS ....................................................$229,900

DUMP TRUCKS 2021 CANYCOM SC75PD, RUBBER, 2,200 LB, 35" WIDE, 180° DUMP ............. CALL 2021 CANYCOM SC75PD, RUBBER, 2,200 LB, 35" WIDE, 180° DUMP ..... FOR RENT 2021 YANMAR C50R-5AR, CAB AIR, SWIVEL DUMP, 8,379 LB + PAYLOAD, ONLY 77 HRS..........................................................................................................CALL

LIFTS & LIFT TRUCKS 2014 GENIE GS1930, 36" EXT, PWR TO PLATFORM, REM. CTRL, 449 HRS .... CALL 2014 GENIE GS2632, 36" EXT, PWR TO PLATFORM, REM. CTRL, 376 HRS .... CALL 2014 JLG T350 ELECTRIC TOW BEHIND ART BOOM LIFT, ONLY 179 HRS ......... CALL 2013 GENIE Z30/20N, SOLID NON MARKING TIRES, 4' JIB, 227 TIRES .. FOR RENT

WATER TRUCKS 2005 PETERBILT 335, 2,000 GAL, CUMMINS ENG, 6 SPEED, 1.5" PUMP, SIDE AND REAR SPRAY, 65,180 MILES ......................................................................... CALL 2004 FREIGHTLINER M2106, CAT C7 ENG, ALLISON AUTOMATIC, 2,500 GAL SUPREME TANK, PUMP, FRONT, REAR, SIDE SPRAY, 251K MILES .............. SOON

SOUTHLAND TRAILERS 2022 SOUTHLAND SL510-7K 10' DUMP TRAILER, CAP 10,875 LBS, WT 3,125 LBS, LIFT CAP 9 TONNES, BOX DIMS 14' (L) X 7' (W) X 16" (H), 2-3,500 LB AXLES, CHARGING KIT, SIR, TARP, REMOTE.............................................................. CALL 2022 SOUTHLAND SL714-14K 14' DUMP TRAILER, 14,000 GVWR, CAP 10,875 LBS, WT 3,125 LBS, LIFT CAP 9 TONNES, BOX DIMS 14' (L) X 7' (W) X 16" (H), 2-7,000 LB AXLES, CHARGING KIT, SIR, TARP, REMOTE ............................... CALL 2022 SOUTHLAND SL714-16K 14' DUMP TRAILER, 16,000 GVWR, CAP 12,300 LBS, WT 3,700 LBS, LIFT CAP 9 TONNES, BOX DIMS 14' (L) X 81" (W) X 20" (H), 2-8,000 LB AXLES, CHARGING KIT, SIR, TARP, REMOTE ............................... CALL 2022 SOUTHLAND SL714-16K HD 14' DUMP TRAILER, 17,000 GVWR, CAP 13,210 LBS,WT 3,790 LBS, LIFT CAP 9 TONNES, BOX DIMS 14' (L) X 6.5' (W) X 18" (H), PWR JACK, 2-8,000 LB AXLES, CHARGING KIT, SIR, TARP ........................... CALL

FOR RENT

FOR SALE

2005 CAT 730, 23.5R25 TIRES, EMERG STEER, 15,085 HRS ................. $124,900

2017 KOMATSU WA380-8, 23.5R TIRES, RVC, Q/CHANGE FORKS AND GP BUCKET.

FOR RENT

2019 HITACHI ZX350LCK-6, 2 BUCKETS, QUICK CHANGE, HYDRAULIC THUMB, CABGUARD, CATWALKS, ETC.

PACIFIC RIM RENTAL DIVISION MINI EX

YANMAR SV08-1D 2,348LBS, 5'4" DIG DEPTH, 2'3"-2'9" WIDE, 2 BKTS Q/C YANMAR VIO17-A 3,836LBS, 7'7" DIG DEPTH, 2 BKTS HYD THUMB YANMAR VIO25-6A 6,217LBS, 10'4" DIG DEPTH, 2 BKTS HYD Q/C & THUMB YANMAR VIO35-6A 8,214LBS, 11'3 " DIG DEPTH, 2 BKTS HYD Q/C & THUMB HITACHI ZX35U-5 RUBBER, CAB AIR, 2 BKTS THUMB YANMAR SV40 9,515LBS, 11'10" DIG DEPTH, 2 BKTS HYD Q/C & THUMB YANMAR SV40 6 WAY DOZER, 11'10" DIG DEPTH, 2 BKTS HYD Q/C & THUMB YANMAR VIO50-6A 10,792LBS, 12'3" DIG DEPTH, 2 BKTS HYD Q/C & THUMB HITACHI ZX50U-5 RUBBER CAB AIR, 2 BKTS HYD THUMB YANMAR VIO55-6A 12,247LBS, 13' 6" DIG DEPTH, 2 BKTS HYD Q/C & THUMB YANMAR VIO80-1A 18,268 LBS, 15'4" DIG DEPTH, 2 BKTS HYD Q/C & THUMB YANMAR SV100-2A 22,000LBS, 15'9" DIG DEPTH, 2 BKTS HYD Q/C & THUMB HO-PACS, BREAKERS AND MANY OTHER ATTACHMENTS AVAILABLE

EXCAVATORS

HITACHI ZX75US-5B 2 BKTS, HYD THUMB KOMATSU PC78US-10 2 BKTS, HYD THUMB CAT 312F BLADE 2 BKTS, HYD THUMB CAT 312F 2 BKTS AND QUICK CHANGE HITACHI ZX135USK-5 2 BKTS HYD THUMB AND 2,500FT LB BREAKER 2 DEERE 135G BLADE, 2 BKTS HYD THUMB HITACHI ZX135US-6 BOLT ON RUBBER PADS, 2 BKTS, Q/C HITACHI ZX135US-6 SLIDE ARM, 2 BKTS, Q/C, EXTRA COUNTERWEIGHT 10 HITACHI ZX135USBL-6 BLADE, 2 BKTS, HYD THUMB CAT 315 07 BLADE, 2 BKTS, HYD THUMB, 2D GRADE CONTROL KOMATSU PC200LC-8 2 BKTS, HYDRAULIC THUMB 6 HITACHI ZX200LC 2 BKTS, HYDRAULIC THUMB 7 DEERE 245G LC 2 BKTS, HYDRAULIC THUMB 8 HITACHI ZX245USLC-6 2 BKTS, HYDRAULIC THUMB CAT 323 07 2 BKTS, HYDRAULIC THUMB, 2 D GRADE CONTROL 3 HITACHI ZX345USLC-6 2 BKTS, HYDRAULIC THUMB, CABGUARD

Authorized Dealer

3 HITACHI ZX330LC 2 BKTS, HYDRAULIC THUMB, CAB GUARD HO PACS, BREAKERS, V BUCKETS ETC AVAILABLE

DOZERS

CAT D3K2 LGP 6 WAY DOZER, CAB AIR, 80HP, 20K LBS KOMATSU D39PX-22 6 WAY, CAB AIR, ONLY 1,933 HRS, MS RIPPER(D5K SIZE) KOMATSU D39EX-24 6 WAY, CAB AIR, MS RIPPER CAT D6K2 XL 6 WAY, CAB AIR, MS RIPPER KOMATSU D65PX-17 6 WAY DOZER, MR RIPPER, SWEEPS

LOADERS, SKID STEERS

YANMAR V4-7 CAB AIR, BOBTACH Q/C, .91 CU YD BKT YANMAR V12 CAB AIR, QUICK CHANGE FORKS & 2.03 CU YD BKT 3 KOMATSU WA200PZ-6 20.5R25 TIRES, AUX HYD, HYD Q/C, BKT, R/C JIB, FORKS AND SWEEPER TO FIT AVAILABLE KOMATSU WA250PZ-6 20.5R TIRES, HYD COUPLER, E/S, 3 YD BKT/FORKS KOMATSU WA320PZ-6 20.R25 TIRES, 3.5CUYD BKT, AUX STEER, R/C, 399HRS KOMATSU WA380-8 23.5R TIRES, HYD Q/C, A/C, R/C, RVC CAT 950K 23.5R TIRES ,A/C, R/C, E/S, Q/C BKT/FORKS 3 BOBCAT S70 CAB, Q/C 36" BUCKET 5 BOBCAT SKIDSTEERS CAB AIR Q/C BUCKETS, AUX HYDS 7 KUBOTA TRACK LOADERS CAB, AIR, Q/C BUCKETS AUX HYDS

GRADERS / COMPACTORS

CAT 140M VHP 14.00 TIRES, 14'MB, SCARIFIER, CAB AIR, ONLY 4,285 HRS SAKAI TW354 47" 3 TON COMBI ROLLER, KUBOTA ENG 3 CORNIVER CT40S 40" SMOOTH DRUM, KUBOTA ENG, FF TIRES 4 CORNIVER CT48S 48" SMOOTH DRUM, KUBOTA ENG, FF TIRES 2 VOLVO SD25D 41" DRUM DRIVE, CANOPY 6 VOLVO/SAKAI SD45B/SV204 54" SMOOTH DRUM, CANOPY 3 VOLVO SD75 66" DRUM DRIVE, CAB AIR 3 VOLVO SD75B 66" DRUM DRIVE, CANOPY 2 SAKAI SV414DC 67" SMOOTH DRUM, CAB AIR COND NEW SAKAI SV544 84" SMOOTH DRUM, CAB AIR COND

DUMP TRUCKS 6 CANYCOM SC75PD RUBBER, 2,200 LB PAYLOAD, 35" WIDE, 180 DEGREE DUMP 4 YANMAR C30R-3R SWIVEL DUMP, 5,513 LB PAYLOAD 5 YANMAR C50R-5AR CAB AIR, SWIVEL DUMP, 8,379LB + PAYLOAD 6 KOMATSU HM300-5 30TON ART TRUCK, 23.5R TIRES, HTD BOX

LIFTS & LIFT TRUCKS GENIE GTH-5519 TELESCOPIC FORKLIFT, CAB, ROTATING CARRIAGE. 300 HRS JLG G1055A 10,000LB, 55' LIFT, CAB, HYD LEVELING GENIE GR12 ELEC PERSONAL LIFT, 12' VERT LIFT, 500LB CAP GENIE GS1930 19' ELECTRIC SCISSORLIFT GENIE ROUGH TERRAIN SCISSORLIFTS AVAILABLE, 26' AND 33' JLG T350 ELECTRIC TOW BEHIND ART BOOM LIFT, ONLY 179 HRS GENIE Z30/20N SOLID NON MARKING TIRES, 4' JIB, ONLY 227 TIRES 2 GENIE Z34/22 34' DIESEL 4X4 LIFTS W/JIB 5 GENIE Z45/25J 45' DIESEL/GAS 4X4 LIFTS W/JIB 4 GENIE Z60/34 60' DIESEL LIFT AVAILABLE GENIE S65 65' STRAIGHT BOOM, DIESEL LIFT JLG 660SJ 4X4, 60' BOOM, 72" JIB, ONLY 2,400 HRS GENIE S85 85' STRAIGHT BOOM DIESEL LIFT

MISCELLANEOUS 2,000 GALLON WATER TRUCKS AVAILABLE FOR RENT TRAILTECH L235HD-10 10' DUMP TRAILER, 2-3,500LB AXLES TRAILTECH L270HD-14 14' HYD DUMP TRAILER, 2 7,000 LB BRAKING AXLES, 2 WAY GATE TORO TRX20 WALK BEHIND CRAWLER TRENCHER 36" BAR, GAS PWR

www.pacificrimequipment.com | sales@prequip.com

Page 8

Supply Post · supplypost.com

August 2022

Ground Stabilization Works For Cycleway Construction 2005 Cat 973C Track Loader Waste Handler, with a Hydrostatic Transmission. 13,631 hours. This machine has been well looked after and serviced on time. Undercarriage has around 65% life left. $90,000.

TRUCKS, TRAILERS & EQUIPMENT FOR SALE 2007 Genie GS-4390RT Scissor Lift. 4×4, 1178 Hrs, Landing Gear 43FT Max Platform Height ...............................................................$11,985. 2012 Cat D6T, with 10,571 hours. C/W VPAT Blade & Ripper. 1000 hrs on new aftermarket U/C. 2,000 hrs on new injectors, 1000 hrs on refurb. hard bar & new angle blade cyl. bearings. Blade re-skinned. Brand new Cat rails & track shoes for an additional cost. .................................POR. 1988 Kenworth T800. Cummins 444, 1.1mil KM Approx., Eaton 15 Speed, Nahanni Steel Box w/Hi-Lift, New Frame Rails, New Suspension + Hardware. Daily Worker .......................................................$57,885. 2000 Manac 48’ Highboy. 8’6 x 48’, Tandem, Full Slide Suspension ................................................................................................$19,785. 1997 Aspen Double Drop Trailer, 8’6 x 29’6, Tandem, Booster, Mechanical Neck, Current CVI ..................................................$26,885. 2017 John Deere 290G. 6,800 hrs. Clean up & Dig bkts, Thumb, Aux Plumbing. Guarding, Webasto heater. UC has about 70% life left......POR. 2013 Cat 257B. Only 1,352 hrs. Rubber tracks, c/w GP bkt. Machine is in good shape. 1 owner, bought new from Finning .............$45,999 OBO.

2012 Mack Pinnacle. Mack MP8 Engine, 500HP, 982,000KM Approx., Eaton 18 Speed, New Torque Rods, New Slack Adjusters, New 5th Wheel Plate, New VGT Actuator, Live Floor Plumbed. Heavy Spec truck: 20k Front axle and 46K Rear Axle. $49,985.

RENTAL INVENTORY • CAT DOZERS • JOHN DEERE EXCAVATORS • 30 & 40 TON ARTICULATED TRUCKS

Can’t find what you’re looking for? Find more of our equipment on SupplyPost.com, or give us a call! Visit: supplypost.com/dealers/ champs-equipment.

CALL: 1-844-803-2566 | Email: glenn@champsequipment.com

SARATOGA

VENTURES LTD.

592 Lilac Cres., Campbell River, BC V9W 7G6 | Phone: 250-286-3211 | Fax: 250-286-3284

CALL

1992 CYPRESS 7230 SUPER SNORKEL.

New Power Input Shaft, Coupler, Cooling pkg. Mainline & Haul Back Frictions Relined, F-Drive Planetaries Disassembled/Inspect., F-Drive Gears Replaced on R/H Travel, Both Travel Mtrs. Torn Down & Inspect. the R/H Travel Mtr. & Brake Required Rebuild, Swing Mtr. Inspect. & Resealed, Rock Guards Removed & Re-Worked, New 8 Rollers, 2nd Section of Snorkel Rebuilt & Updated Nose Line Lugging Added, All New Lines & Turnbuckles on the Comp. Snorkel & a Rebuilt Esco Grapple, Unit has Not Worked Since the Repairs .......................................... POR

2010 Caterpillar 325C, equipped w/52” Pierce Grapple, 12,000 Hrs .......................................$85,000

2007 Link-Belt 240LX, equipped with 622B Waratah processor, 22,600 Hrs ....................$79,000

2004 Caterpillar 330C Log Loader, equipped w/ T-Mar Grapple, 25,800 Hrs..... $87,000

2006 Komatsu PC200LL-7, c/w forestry cab mtd on 17’’ riser. Hyd. QC, 2 bkts, hyd. thumb. Mtd high & wide U/C, 26’’ dbl bar pads. Machine hrs: 15,700 ..............$80,000

1999 Madill 3800B Log Loader, with 60” Jewell Grapple. This machine has 4700 hours on a rebuilt engine with the pumps being inspected and resealed at the same time. It has recently had the boom foot pin changed and the machine is very tight and dry. It also comes with a spare final drive, sprocket, Idler and a Jewell grapple cylinder (core) .............................................. $99,900

2008 Hitachi ZX350LC-3, 2 Buckets, Hyd. Thumb, Cab Guard, Triple Grouser Pads, U/C 75%+, Engine in-framed 2021, Both Pumps were gone through & resealed in Feb of 2022, 12,070 Total machine hours ......................................................$85,000

2001 Caterpillar 980G Wheel Loader, c/w Finning Log Grapple, 23,000 Hrs......$65,000

(4)x 29.5X25 Tires with Wheels to fit CAT 980F ...................................... $1,500/each

2006 Cat 330C Log Loader w/ a T-Mar 60” Extreme Duty Grapple & 28” Single Grouser 1976 21’ Voyageur Welded Aluminum Pads. 25,600 hrs. (Total Machine Hours), 4 Passenger Crew Boat, with 200 HP Engine & Pump Replaced at 16,000 hrs., Both Final Drives & Travel Motors Replaced Mercury Outboard ............................$38,500 at 21,000 hrs., Rotec Bearing & Swing Box Replaced at 22,000 hrs., Track Adjusters 11ft Aluminum Deck with Built in Powder Replaced at 22,500 hrs., The Grapple has a New Swivel Manifold w/ 8 hrs. on it Box & Cabinets to fit a Ford F550 .......$6,500 ......................................................$72,500

SSOOLDLD

TOLL FREE 1-888-668-1611 | svl@saratogaventures.com

The construction of cycleways is a hot topic in Italy. In fact, the country needs to make up for the lost time of recent years and remedy the shortage in this type of infrastructure, which offers the possibility of sustainable mobility and attracts increasing numbers of Italian and European visitors every year. Indeed, the market for this kind of active holiday runs well into the thousands, and it is becoming a popular trend within Italy itself. In response, many Italian provinces and local authorities are investing to construct new cycleways or connect and improve the accessibility of existing ones. The “Bicitalia” project, which covers every region of Italy and aims to create a unified national cycle route, is perhaps the most representative example. Meanwhile, the Province of Padua launched a call for tenders for the construction of a 32-km section of cycleway to form part of the “Walled Cities Circuit”, which connects the towns of Monselice, Este, Montagnana, San Salvaro, Merlara and Vighiozzolo d’Este. The multi-kilometer circuit crosses through the Paduan plains, the Euganean hills and the Scodosia region, and was partially completed in 2020. F.A.I. Srl, a company based in Fossò (VE) that has been operating in Veneto, Lombardy, Friuli and Emilia Romagna since 1981 and specializes in construction, asphalt, FAE GROUP

2013 Cat 320D L. 13,303 hours. Dig & Clean up Bucket, Thumb & Aux Hydraulics, Positive Air Shut off, U/C at about 80% life left. Oil samples and service history available. Please contact for pricing.

waste transportation and rail and forestry works, was awarded the public contract (along with Ecovie Srl and Girardini Costruzioni Generarli Spa) to conduct the roadworks on this section of the cycleway. The firm’s owners Alberto and Federico Giora explained the details of the various phases of the works, which began in December 2021 and are due for completion in July 2022. The works are conducted using a multitask FAE MTM/HP machine purchased in June 2021, paired with a DEUTZFAHR 9340 TTV tractor. The Stages Of The Project “The section of works in our remit runs along the true left bank of the “Scolo Fontana” canal between Villa Bartolomea and Chiesa Vecchio close to Montagnana: the embankment is composed of rather loose earth with a high sand and clay content, but with some small rocks,” explains Giora. “When we began to work, the site was completely covered by vegetation, mainly grass, weeds and small shrubs. The first task was to remove the surface material using the DEUTZ-FAHR 9340 TTV tractor and a harrow and leveler. We took soil samples and sent them for analysis in the laboratory to see which binding agent would be most suitable in the ground stabilization phase: out of lime and cement, we decided to use cement.

After this meticulous technical evaluation we added a stabilizing layer of 0-20 gravel to the soil and then applied a layer of cement using the cement spreader. At this point our FAE MTM/HP came into play, consolidating the earth in two successive passes and leaving the ground instantly stabilized and completely uniform in terms of particle size. We then passed a 200-tonne iron/rubber roller over the site, compacting the earth several times, and then used the leveler to achieve the desired profile of the land. All that remained was a final pass of the finishing iron/rubber roller to complete the final compaction. Once the surface was perfectly even, we applied the asphalt and a layer of grit, also known as the “triple-layer” (a mixture of bitumen and gravel) that offers a very natural “gravel effect” suitable for bicycles. At this point our work was complete. Cycling along a cycleway constructed in this way is pleasant and safe: there are no holes, bumps, puddles or other obstacles that can create problems for cyclists.” A Word From The Site Engineers Let’s get a professional opinion of FAE from Alberto Giora and his team of engineers. “We were immensely satisfied with the MTM/HP,” says Giora. “This multitask machine is really aiding our work regularly and without hiccups. We work earth up to 40 centimeters deep at an average speed of 1.5 km / hour. The cost of fuel is around 40-45 liters / hour. At the end of the works we will have stabilized Continued on page 9

An FAE MTM/HP works on a section of the “Walled Cities Circuit” in Veneto.

August 2022 Continued from page 8

162,000 m2 of earth and with the help of this machine we know we are always working to capacity. What’s more, we’ve been really impressed by the resistance to wear of the original FAE teeth attached to our rotor. The machine has already done over 400 hours of work on various types of terrain and the teeth show no signs of wear: we’re still using the original set that was mounted when we bought the machine in June 2021. We’re also very happy with the performance of the MTM/HP on rocky terrain: we know that if we happen to come across particularly hard materials like blocks of cement during our work, the machine will have no problem in breaking them down, and not all models on the market offer this level of security. Other benefits we’ve noticed on site when using the DEUTZ-FAHR 9340 TTV combined with the MTM/HP are the reversing speed and the good rear visibility, which mean we can always keep the works under control. But perhaps the biggest plus for a company like

Supply Post · Our Readers Are Your Buyers ours which operates on different sites is the machine’s versatility and its ease of transport thanks to its compact size. We can move it quickly and easily from one site to the next using tractors on normal asphalt

ONLINE Check out video and more photos at

SUPPLYPOST.COM/NEWS roads and carriageways without needing to use special machinery. This results in huge savings of both time and money.” On site, the FAE MTM/HP was paired with a DEUTZ-FAHR 9340 tractor, which has a six-cylinder, 7,775 cm3 motor and a maximum output of 336 horsepower. It is regulated using the advanced electronically controlled continuously variable TTV transmission system with a speed range of 0.2 Km/h to 60 Km/h in all towing conditions.

Technical Specifications And Performance The FAE MTM and MTM/HP are multitask machines that can be used with tractors between 240 and 360 hp. They are designed to stabilize terrain, crush rocks and mill asphalt up to a depth of 40 cm. The compact size and excellent maneuverability enable the MTM to work on surfaces which are difficult to reach using selfpowered vehicles. One of the most important features of this model is the variable displacement chamber. This technological solution, which is one of a kind in the industry, allows the ground to be penetrated with the rotor alone, which can be adjusted hydraulically from the tractor cabin. The chamber has a variable volume: the greater the working depth, the greater the volume of the chamber. Compared to a machine that plunges the frame into the ground, the variable displacement chamber reduces traction stress, which decreases fuel consumption and in-

BETTER MANAGE PRODUCTION FROM THE CONVEYOR TO THE TRUCK We understand your operational challenges and have the solutions to improve it.

Measure your output CONVEYORS SCALES SIZE 30 - 48 IN

Learn more about Scitronics & discover

your rebate!

Continued on page 10

DISPERSAL OF FLEET! MORE EQUIPMENT AVAILABLE - Give us a Call!

Avoid overloads LOADERS SCALES MILLENNIUM 5 - SERIES 2

See what VEI has to offer & discover

your rebate! 2013 Komatsu PC290 LC-10. 9,481 Hrs, A/C, Air Ride Seat, CP Changer, Screens, Rear Camera, 10’6” Stick, 31.5” TG Track Shoes, Rock Guards, Manual Q/C, 42” Dig Bkt, Hyd. Thumb, Catwalks, Safety Rails, Pass. Rake, Clean Up Bkt ............$162,000.

2019 John Deere 848L 4x4 Skidder. S/N 1DW848LBPKF696996. 4,067 Hrs. A/C, Joystick Steering, Air Ride Seat, Sweeps, Blade, Double Arch, 35.5L32 Tires w/2 Pairs of Chains. ...........................................................................$320,000.

Optimize your loads ONBOARD TRUCKS SCALES BRT5 - SERIES 3

2014 Komatsu D155AX-7 Crawler Dozer. 8,919 Hrs. New U/C, Encl. Cab, A/C, Rear Camera, Air Ride, Pre-Wired for Grade Control, Direct Drive, ‘13 US EPA Label, Sweeps, Angle Blade w/Dual Tilt, 26” SG Track Shoes, 4 Cyl. MS Ripper.................$315,000.

2012 Komatsu D65 EX-17 Crawler Dozer. 13,053 Hrs. Encl. Cab, A/C, Rear View Camera, Air Ride Seat, Direct Drive 2011 US EPA Label, Sweeps, Angle Blade w/ Dual Tilt, 26” Single Grouser Track Shoes, 4 Cyl. MS Ripper .................$175,000.

Find out more about TrackWeight & discover

your rebate!

Weighing and Vision Technologies

2013 Komatsu PC290LC-10. 25,697 Hrs, A/C, Air Ride, Cab Riser, Forestry Pkg, Cab Screens, Fire Supp., US EPA, Posi Air, 28” DG Track Shoes, High & Wide U/C, Rock Guards, 10’6” Stick, Aux. Hyd. Plumbing, ‘12 Waratah HTH623C, Comp. Meas., Steel Feed Rolls, Butt Saw, Catwalk. New Engine, Pump & U/C ........................$245,000.

2017 John Deere 953M Track Feller Buncher. 10,268 Hrs.A/C, Straight Travel Pedal, Air ride seat, Forestry Package, Cab Screens, Fire Suppression System, E-Stops, 28” Single Grouser Track shoes, High & Wide U/C, Rock Guards, John Deere FR2B 55” Feller Buncher, High-Rotation Wrist, Catwalks, Engine Heater .........................................$305,000.

1-833-222-5047 tjloggin@telusplanet.net

Page 9

The RMT team puts all of its technical and engineering expertise to maximize your productivity. After 24 years, we are a Canadian leader developing weighing solutions for the aggregate industry. Visit our website to find your RMT local dealer or call us to see how we can help!

1 888 559-1151 | rmtequip.com

Page 10

Supply Post · supplypost.com

August 2022

such as the extended 3-point linkage system, multi-tooth options, the hydraulic top link, the WSS High Flow water spray system and the FCS full control system. The WSS High Flow system is a water spray system powered by a hydraulic motor and Optional Accessories Various options are equipped with a high caavailable for the MTM, pacity pump. The system has been designed to offer better mixing. In fact, • SPECIALIZING IN NEW & USED UNDERCARRIAGE the high capacity of the • PARTS • EQUIPMENT RENTALS & REPAIRS pump not only prevents EQUIPMENT LTD. the teeth from overheat• TRACK PRESS FACILITY • IDLER REBUILDING 594 Chilcotin Road, Kamloops, BC V2H 1G5 ing, thus enabling asphalt EQUIPMENT FOR RENT OR SALE shredding and recycling RENTED • 2018 Komatsu PC200LC-8, 3 bkts, Q/C, thumb, cabguard, catwalk, new cond., 1,175 hrs. activities; it also promotes • 2017 Komatsu PC350LC-8, 3 bkts, thumb, cabguard, catwalks, exc. cond. 3,191 hrs. RENTED higher humidity levels in • 2015 Komatsu PC170LC-10, 3 bkts, thumb, cabguard, like new cond., 2,250 hrs. • 2014 Komatsu PC88MR-8, 2 bkts, hyd. Q/C & thumb, swing boom, 2,400 hrs. the mixed earth, making • 2016 Hitachi ZX85 USB-5, 2 bkts, hyd. thumb, swing boom and blade, exc. cond. the machine suitable for RENTED • 2012 Komatsu D65EX-17, sigma blade, ripper & forestry guard., new U/C, exc. cond. stabilization works. • 2014 Komatsu WA270-7, 3 yd bkt, hyd. Q/C, forks/pipe grapple, exc. cond. • Dressta TD10M Crawler, 6 way, blade, cab, A/C, 1,350 hrs, like new cond. RENTED The FCS Full Control • 2014 Hamm H13iX, 84” smoothdrum packer RENTED w/cab, A/C, low hrs, exc. cond. 2018 Hitachi ZX290LC-5N, 2 bkts, thumb, System is a state-of-the-art • 2012 Hamm 3412, 84” smoothdrum packer w/shell kit, cab, A/C, exc. cond. RENTED cabguard, catwalks, like new cond. 2,817 hrs. RENTED • 2014 Hamm 3307, 66” smoothdrum packer w/shell kit, cab, A/C, exc. cond. automatic injection system HUGE INVENTORY OF USED UNDERCARRIAGE designed by FAE to ofFOR SALE 2020 Komatsu fer optimum water supply • New (Berco) Cat 330 TGA’s 28”, 2 bar pads • New (Berco) Cat 325 TGA's 32”, 3 bar pads PC138USLC-II, and distribution and/or • New (Berco) Cat 325 48 Link Bare Rails stabilization using liquid 2 Bkts, Hyd. Q/C, • New Deere 75G/85G TGA'S 18", 3 bar pads binding agents. This sys• Deere 2154 TGA’s 28” 2 bar on new rails Thumb, Exc. • Deere 2054 (Good Used) Final Drive Assembly tem enables the operator 1992 - 2022 • ZX350, ZX450 bottom rollers Cond., 2,100 Hrs. to set the exact quantity of • ZX200LC/PC200LC TGA, 28” 2 Bar on new rails P.O.R. liquid on the display based • ZX200 (Rebuilt) Track Adj. Assembly • T.Cat 870 / PC400 / Deere 959, track adj. assy. rebuilt on the road surface (l/m2) Email: traktech@telus.net or the crushing volume (l/ Phone: (250) 374-5054 m3). b EVES: Regan Zurowski (250) 371-1444 • Chad Zurowski (250)371-7535

Continued from page 9

creases operating speed, saving time as a result. The variable displacement chamber also offers excellent performance in terms of rock crushing. Furthermore, the Hardox wear-resistant counter blade and grille on the rear hood guarantee the desired granulometry of material processed.

Other notable features of the series include the hydraulically controlled front and rear hood, the interchangeable Hardox wear-resistant plates, the completely enclosed and dust-resistant body, the internal lateral protection, the protection chain, the adjustable Hardox counter blade, the transmission system, the free wheel

gearbox, the clutchless drive shaft (HP version) or drive shaft with clutch for the classic version, the side drive shafts with friction clutch, the welded steel bolt-on rotors, the adjustable skids and the dozing blades with spring system.

For photos and more listings visit www.traktech.ca

Source: FAE Group

Volvo CE & World RX To Develop The Next Generation Of Rallycross Tracks Following the news that Volvo Construction Equipment (Volvo CE) has become the Official Construction Equipment Supplier to the new fully electric FIA World Rallycross Championship (World RX), Volvo CE today announces that it will expand its involvement – becoming the Series’ Official Track Build Partner’. When Volvo CE commits to something, it goes ‘all in’. So, when asked to support the build of the tracks for the new 680bhp electric cars, the company decided to use its off-road expertise to help World RX in designing and testing a whole new series of track elements that will encourage the racing to be as close as it is thrilling. World RX Tracks 2.0 Following a series of workshops on what features make the ‘perfect’ rallycross track, Volvo CE invited the FIA, Race Series organizer Rallycross Promoter GmbH and pro-

fessional drivers Timmy Hanssen, Klara Andersson and Niclas Grönholm to its specially developed ‘RallyCross Test Lab’ at the GTR racetrack in Eskilstuna, Sweden. Here, Volvo CE has helped test and design jumps, turns and dynamic features to keep the racing electrifyingly close. These included steeply banked turns, chicanes and epic jumps. During a three-day test at the Rallycross Test Lab in early May, each track element was closely evaluated, with lots of ideas on how to encourage more overtaking and a greater spectacle for racegoers. The racing experts’ suggested improvements – which were then quickly realized using Volvo CE’s machines, refining each element until it was considered perfect. Once each feature was signed off by the FIA, the build data was captured in 3D on Volvo CE’s Dig Assist in-cab machine control Continued on page 11

#1 SOURCE FOR

AFTERMARKET PARTS IN CANADA YOUR UNDERCARRIAGE EXPERTS!

www.essltd.com

SINCE 1946

CONNECT WITH US

August 2022 Continued from page 10

application. These data can then be programmed into Volvo machines and recreated at each of the tracks the race series visits during the coming World Championship. This will not only reduce the build time of each track considerably, but also do it with minimal carbon footprint.

VOLVO CE

Designed For Racers – By Racers “The new tracks are going to be awesome!” says Klara Andersson, who drives for the new Construction Equipment Dealer Team in the forthcoming championship. “The jumps are epic – the fastest ones

Supply Post · Our Readers Are Your Buyers we will hit at 100 km/h and fly through the air for 25 meters and more!” “The new race elements will be thrilling to drive,” agrees Klara’s teammate Niclas Grönholm. “The steep banking means we will be able to drive through turns on full throttle, while other corners are cleverly designed so that there are multiple racing lines – leading to wheelto-wheel racing and more overtaking.” No Compromise Construction “Our aim is to create the next generation of thrilling Rallycross circuits in the most effective and sustainable way,” says Arvid

VCE and World RX Rallycross tracks.

Rinaldo, who heads up the partnership and the operational involvement in World RX for Volvo CE. “Our ultimate aim is to support the build and upgrade of tracks with a zero-carbon footprint, but

thanks to the use of our electric equipment and latest low-emission engines running on biofuels, even at the outset we hope to significantly reduce the carbon footprint of each track build. It’s the perfect plat-

Page 11 form for us to demonstrate to our own audiences how we can help transform the construction equipment industry and motorsport to be more sustainable.” The 2022 FIA World Rallycross Championship

season starts at the Höljes circuit in Sweden on July 2-3, with the first race weekend at the legendary Nürburgring in Germany on July 30-31. b Source: Volvo CE

SEATING MADE YOUR WAY! Let us customize your Darby seat for maximum operator comfort.

Darby Manufacturing|Industrial Seating Specialists|705-560-9421 | darbymfg.com

Design the best. Build the best. For the best.

Built for West Coast logging.

HEAVY DUTY GRAPPLES HD 52” | HD 56” | HD 60”

• Fits 20 - 29T carriers. • Replaceable solid steel tips for superior handling. • 1” purpose-built steel-composition grapple cylinders manufactured in-house. • Perfect linkage to T-MAR Heel Racks, Brush Rakes and Grapple Saw attachments. • Purpose-built design and manufacturing on Vancouver Island, BC.

sales@t-mar.com

t-mar.com

@tmarindustries

Page 12

Supply Post · supplypost.com

CANADA’S

USED EQUIPMENT INVENTORY brandtused.ca What are you looking for? Searching for used equipment just got a whole lot easier with advanced searches, currency conversion and monthly payment calculations. And every machine is backed by Brandt – the best-trained and committed after sales support team in the business.

brandtused.ca | 1-888-227-2638

August 2022

Supply Post · Our Readers Are Your Buyers

2020 KUBOTA SVL75-2 Unit #: 0U046672

$95,800

2013 JOHN DEERE 310SK Unit #: 0U243020

$72,700

2008 WIRTGEN 120F Unit #: 0U100475

$136,900

2020 JOHN DEERE 324G Unit #: 1U373924

$85,300

2017 JOHN DEERE 300G LC Unit #: 0U731057

$375,000

2017 JOHN DEERE 310SL Unit #: RO312987

$89,900

2018 JOHN DEERE 524K-II Unit #: RA684275

$209,500

2017 JOHN DEERE 1910E Unit #: 1U001560

$305,300

2018 JOHN DEERE 344L Unit #: 0U050184

$152,600

2019 JOHN DEERE 953M Unit #: 0U343804

$325,000

FLEXIBLE OPTIONS FINANCING CUSTOMIZED, FIND OUT MORE 1-855-711-4545

2006 CATERPILLAR CB534D Unit #: 1U000584

$30,000

2014 JOHN DEERE 772G Unit #: 0U662381

$221,000

2016 JOHN DEERE 848L Unit #: 0U675580

$194,800

2016 CATERPILLAR 140M Unit #: 1U004783

$245,500

2019 JOHN DEERE 1050K Unit #: 0U353488

$750,000

Page 13

2011 JOHN DEERE 200D LC Unit #: 0U513090

$89,500

2014 KOMATSU HB215LC1 Unit #: 1U001812

$100,000

2015 JOHN DEERE 772G Unit #: 0U667359

$300,000

2016 CATERPILLAR 535D Unit #: 1U500115

$92,700

2017 KUBOTA KX-40 Unit #: 0U028958

$81,600

Supply Post · supplypost.com

Kubota Expands North America-Based Innovation With Grand Opening Of R&D Center Kubota North America Corporation (KNA), the parent company for Kubota Tractor Corporation (KTC) and Kubota Manufacturing of America (KMA), and Kubota Canada Ltd (KCL) celebrated the grand opening of the new 280-acre, Research and Development Center in the state of Georgia to meet the needs of North American customers. Kubota has invested more than $85 million to bring the new facility online and will open with 70 engineering and technical employees and grow to nearly 200 employees over the next five years. “Constant investment in our North America in-

frastructure keeps Kubota evolving and forward looking,” said Mr. Yuichi “Ken” Kitao, President and Representative Director, Kubota Corporation. “We continuously innovate to better meet the needs of our customers – it’s at the core of what we do, it drives our way of thinking and the way we do business. This new R&D center here in Georgia is going to allow us to continue to innovate products and solution advancements with our U.S. and Canada customers’ needs in mind.” Mr. Kitao served as U.S. President and CEO of Kubota Tractor Corporation from 2011-

FIRE SEASON IS HERE!

CALL FOR YOUR STAND-BY WATER TANK NOW!!

NEW OWNERS! Now sold by Full Steam Enterprises Ltd (Formerly by Shiloh Enterprises Ltd)

2013 and championed the North America R&D strategy. The new state-of-the-art center is 100% powered by renewable energy and built on the sustainable principles that are in keeping with the company’s global mission to use technology and efficient operations and practices. For example, the center is powered in part by solar sunflowers and the parking lot features a solar-powered roof to support electric vehicle charging stations. The center will house engineering offices, workshops and testing labs, and outside are tracks for testing turf, utility vehicles, tractors and construction equipment. As the keynote speaker for Kubota’s grand opening event, Georgia Governor Brian Kemp said, “The agriculture industry is the biggest business in the State of Georgia, so we are excited that Kubota, a world leader in agriculture equipment,

has chosen Georgia as the home of its North American research and development center. It’s great to see Kubota continue to expand their footprint and add more jobs here in Georgia.” President and CEO for Kubota Tractor and Kubota North America Corporations, Mr. Shingo Hanada, marked the occasion by stating, “Kubota is celebrating 50 years of innovation in the U.S., and our goal is to continue to make strategic investments in our infrastructure to develop solutions to ultimately help our dealers and our customers achieve more as we grow together for the next 50 years and beyond.” In terms of added jobs, Phil Sutton, Vice President for Kubota Manufacturing of America added, “We’re continuing to build on an already strong foundation in the State of Georgia where we employ more than 3,000 team members across manufacturing, sales, distribution and engineering operations.” Kubota’s Georgia footprint also includes its Southeast Division office, located in Suwanee, Ga., with additional divisional offices lo-

August 2022 KUBOTA

Page 14

Kubota KX030-4 Series Compact Excavator

cated in Edgerton, Kansas; Fort Worth, Texas; Columbus, Ohio; Lodi, Calif.; and KCL headquarters in Pickering, Ontario, all of which

are well-positioned to provide regional support for all Kubota dealers. b Source: Kubota

EQUIPMENT FINANCING | FAST & EASY • Competitive Rates • Forestry • Transportation • Oilfield • Construction • Industrial

Call Ron Corbeil 1-877-767-7600 | rcorbeil@fclfinancial.com

Same Product · Same Patents Still built by a logger for a logger!

WWW.FCLFINANCIAL.COM 339 Sumas Way, Abbotsford

604-850-3601

Ron & Karen: 250-441-3280 Fax: 250-441-3289

STAND-BY WATER TANK For remote access fire suppression, will not crush from grapple pressure

SED ENCLO M PU P

2014 CATERPILLAR MINI EXCAVATOR 305.5E CR, c/w 1x dig & 1x C/U bucket, hyd. thumb, Q/C, Brand new UC: tracks, rollers, sprockets, 43 HP Cat engine, 3,767hrs., Excellent used machine .....................$59,900

RECENTLY ADDED TO OUR RENTAL FLEET!

NEW MST1000VDR ROTATING DUMPER, MST1500VD & MST2200VDR.

1994 MOROOKA MST1500, Cab and Chassis, Call today for more info ............................................$29,000

For more info: Joel 604-850-3601 Ext. 225

www.handlersequipment.com

August 2022

Supply Post · Our Readers Are Your Buyers

Page 15

INLAND EQUIPMENT SALES www.inlandequipment.com | sales@inlandequipment.com | 150 Industrial Place, Penticton, B.C. Call Vic Kampe For Details | Ph: (250) 493-6791 | Fax: (250) 492-2762

FEATURED UNITS FOR SALE, RENT or RENT TO OWN

2014 Volvo VHD Tri Drive Water Truck, 435HP, Eaton Fuller Transmission, Air Brakes, A/R Suspension ...............................$135,000 EXCAVATORS/FORKLIFTS

2018 Hitachi ZX35U-5N, 500 hrs.......$62,900.

Like New Mormak recycling conveyor 30’ x 42”

(2) 2011 Ford F750XL Dump Trucks. Cummins 6.7L, 6 sp, Air brakes, PTO, Double frame, 14’ box, 2’ high, 200” WB, Toolbox, Tarp, triple tail gate chutes, pintle hitch w/ air, Split box w/ two tail gates, Rotary screw air compressor for air tools, Hyd oil cooler, Fold down sides on box ........ ............................................................................... $68,900

NEW EXCAVATORS TO CHOOSE FROM

2004 Eljay RC54 II Cone, c/w overhead conveyor ........................................$175,000 BELLY DUMPS, LOW BEDS & TILT TRAILERS

2014 Diamond C 7 Ton Tilt Trailer 22’ x 8’ ........................................................... $12,000.

2014 Bobcat E85M Excavator, Thumb, A/C, Dozer, 1,319 Hrs ..............................$89,500.

TRUCKS

2012 Bobcat E80 Excavator, Thumb, A/C,

FOR RENT

1,377 Hrs. .......................................$84,500. 2015 Bobcat E63 Excavator, Thumb, A/C

Sizes Available: ZX35, ZX50, ZX60, ZX85, ZX135, ZX210, ZX245

Dozer, 972 Hours .............................$82,500. 1999 Takeuchi TB016 Excavator .......$22,500. 2013 Terex TC16 Excavator, 3,800 lbs, cab, 670 hrs.............................................$32,000.

AMBULANCES

1999 Ford E350 Ambulance ............. $8,500.

BACKHOES/SKID STEERS

2013 Case 590 Super N 4x4 Backhoe Loader .........................................................$64,900. 2010 Case 590 Super M 4x4 Backhoe Loader .........................................................$57,900. 2008 John Deere 310SJ 4x4 Loader Backhoe, 4895 hours, A/C, Ride control, joystick, pattern changer ................................$57,000.

GRADERS & DOZERS

2011 John Deere 872 GP AWD, A/C Push block ............................................. $87,500. 2008 John Deere 870D Grader, Snow wing, low pro cab, A/C, heat ................... $69,000. 2012 John Deere 870GP Motor Grader, A/C, Rebuilt Engine (20 hours on it) .......$85,900.

2015 Caterpillar 259D Compact Track Loader

2006 Volvo G940 Motor Grader, 6,475

.........................................................$58,900.

Hours, 14’ MB, A/C, Aux Hyd, Ripper,

2015 Bobcat S510, Solid tires, Q/C ....$42,000. 2015 Bobcat S510 Skid Steer, Hyd. Q/C, A/C ...................................................$46,000.

Scarifier ........................................$75,000. 2004 John Deere 772CH, Ser. II, AWD, ripper......................................... $105,000.

CRUSHING EQUIPMENT

1998 Mormak Screen deck 6x20 - 3 Deck

25 Water trucks available........................... Call. 1999 International 4900 Bucket truck 55’ Boom model ................................................ $15,900. 2012 Western Star 4900FA T/A 4000 gal Water Truck ................................................ $120,000. 2012 FL1145D 4000 gal Water Truck... $185,000. 2014 Volvo VHD Tri Drive w/4” Bowie pump

.................................................... $100,000.

......................................................... $135,000.

1999 MVP 380 Cone (rebuilt) ......$225,000.

2007 Ford F650 XL 2000 gal, Cummins 200 HP,

2007 MVP 450 Cone .....................$250,000.

6 sp .................................................... $53,900. 2007 Peterbilt 340 3600 Gallon Water Truck,

ROLLERS/PACKERS/CRUSHING & PAVING

2013 Bomag BW211 D50 Smooth Drum Compactor, 84” Drum .................. $59,000.

Cummins 315 HP, 9 Spd ....................... P.O.R. 2004 Ford F750, 2,000 Gallon Water Truck, Front & Rear Spray, Hose Reel ................................$47,500.

(2) 2005 Ammann ASC110 84” Smooth

CRANES

Drum Compactors ................... $59,000 ea. 2007 Ingersoll Rand SD70D, 66” Smooth Drum with Padfoot shell kit........... $61,000. 2013 Bomag BW145 PDH 56”, Blade, 1050 hours............................................. $71,000.

1984 P+H Omega 20 Ton Crane, 62’ Boom, 20.5x25 Tires ..................................... $24,900. 1980 Grove RT740 40 Ton Crane, 4 section boom, 32’ jib, 4x4x4 .......................... $39,000.

FEATURED RENTAL UNITS ★ RENT TO OWN ★

2012 John Deere 310SK 4x4 Backhoe Loader ............................................................$59,500

2013 Case 590 Super N 4x4 Backhoe Loader 2022 Double A CT217-24 24’ x 83 Tilt, 3-7000 lb axles, c/w spare tire.... Call for price

2015 International 4300 SBA 2000 Gallon 4X2 Water Truck, MAXX Force 215 HP, 6 speed Hyd brakes.............................. $72,000

RENTALS AVAILABLE New Hitachi ZX300LC · New Hitachi ZX135LCs · New ZX60, ZX50, and ZX35 ·Volvo Rock Trucks

CALL FOR OTHER ADDITIONAL RENTAL UNITS

Supply Post · supplypost.com

www.viequipmentltd.com WE SELL MOST MAJOR COMPONENTS FOR DEERE, HITACHI & CAT MACHINES

TRY US NOW FOR A QUOTE 250-468-1000

www.viequipmentltd.com

ASV Restores North America’s First Compact Track Loader ASV Holdings Inc., an industry-leading manufacturer of all-purpose, all-season compact track loaders and skid steers, showcases the company’s proud history of thinking outside the box with a restored Ag-Track, North America’s first compact track loader prototype. Built in 1988, the machine innovated the construction industry and led to ASV’s first commercial compact track loader, the PosiTrack MD-70. The cosmetically restored AgTrack is now on display at ASV’s headquarters in Grand Rapids, Minnesota. “It’s exciting to see the original design become new again,” said Cary Safe, who has been with ASV since the company’s founding in 1983. “I helped build the original Ag-Track machine, and it laid the foundation for who ASV is today. To work on the original unit

other applications while taking advantage of the Track Truck’s incredibly low ground pressure. In response to that demand, North America’s first compact track loader, and then to help restore it the Ag-Track, was born almost 35 years later has in 1988. This tracked mabeen quite an honor.” chine could pair with atThe ASV team’s intenContinued on page 17 tion with restoring the appearance of the original machine is to symbolize how far the manufacturer has come. Founded in 1983, ASV originally invented the Track Truck, an all-original vehicle designed to offer all-season, The restored Ag-Track was all-terrain performance. unveiled with many of the While the vehicle was original Ag-Track builders. popular for grooming From left: Bryan Metzer, Keith snowmobile trails, ASV Sumner, Gary Lemke (ASV customers wanted more, co-founder), Cary Safe, Stuart asking for the ability to Boelter and Kevin Sumner. power attachments for ASV HOLDINGS

WORLDWIDE SHIPPING 1-855-559-9995

August 2022

ASV restored North America’s first compact track loader, the Ag-Track.

ASV HOLDINGS

Page 16

August 2022

Supply Post · Our Readers Are Your Buyers

Continued from page 16

tachments for maximum versatility. To gauge interest in the product, North America’s first compact track loader

was demonstrated around the country, showcasing the versatility of the unit. The feedback and testing results would later lead to North America’s first com-

mercially available compact track loader, ASV’s Posi-Track MD-70 in 1990. To restore the machine, which has spent most of the last 35 years moving between ASV properties, the Ag-Track was disassembled down

to the frame. Components were sanded down and sandblasted, fiberglass was repaired, the armrests were reupholstered, and more. ASV’s team used as many original parts as possible. The only new pieces of the

Page 17 restored Ag-Track are the seat, the headlights and several hoses. The original team of builders was invited back to the ASV facility for the official unveiling in mid-May, including ASV co-founder Greg Lemke.

Since the unveiling, visitors to the ASV Grand Rapids, Minnesota headquarters location can see the restored Ag-Truck in the lobby of the visitor’s entrance. b Source: ASV Holdings

ASV HOLDINGS

mountainforestryequipment.com

The restored Ag-Track now sits in the lobby of ASV headquarters in Minnesota.

$367,000

$755,000

$825,000

2016 TIGERCAT 880 BUTTNTOP LOG LOADER, Original UC - Approx 25%, All Original Components, 8,116 Hrs.

2021 H855E LOGMAX 7000XT PROCESSOR, Fire suppression, Tether Hitch, wired for TimberMax Traction Winch, Logmax 510, 1,952 Hrs.

1991 CYPRESS 6280 GRAPPLE YARDER, Cypress Air System - Cummins 2-cyl Compressor + BW700 Compressor, 125 hrs. on Cummins Re-Man - N14 mech. 500 HP, D7 U/C, Pro-Heat syst., O/S Rad, Gear guards to contain grease., 3-mth. use on overhauled Promac Bunching Grapple.

$300,000

$359,000

$60,000

2017 TIGERCAT 635G SKIDDER, New Front + Rear Diffs within last year, New Turbo, New Rear Tracks, 8,335 Hrs.

2015 JOHN DEERE 1910E FORWARDER, Low Hours, Good Rubber & Tracks, Well Maintained Forwarder, 8,875 Hrs.

FOR SALE

MCCloskey J45 45 X 27 JAW CRUSHER

$550,000 CDN.

Langley, BC

Tel: 604-866-0482

NORSTONE EXCAVATING

More possibilities for your excavator, and a better result A tiltrotator can transform your excavator into a flexible do-it-all tool carrier and allow you to take on more tasks while improving your safety, productivity and end-result. rototilt.com/tiltrotators

rototilt.com

2014 KENWORTH T800 LOGGING TRUCK, Good rubber all around, 5th wheel slider, 844,328 Kms.

833-988-0375 KCox@mountainforestryequip.com

Page 18

Supply Post · supplypost.com

August 2022

MAJOR Offers On-Site Technical Services To Maximize Screening Performance

Contact Dave: 778-855-4190 | Dave@unitedearthcontractors.com

EQUIPMENT FOR RENT

CALL DAVE FOR RENTAL AVAILABILITY: • 2021 JD 350G • 2021 JD 345G • 2019 JD 245G • Cat D6T Dozer $79,000

• JD 850K WLT Dozer • JD 850L WLT Dozer • Cat 160M Grader • Volvo A25C Rock Truck • Volvo A25G Rock Truck FIND MORE AT UNITEDEARTHCONTRACTORS.COM | OFFICE: 604-940-0001

Allu is the world market leader in Screener Crusher Buckets. New and Used Buckets Sales and Rentals Replacement Parts in stock

MAJOR, a leading global manufacturer of highperformance wire screening media, works closely with its dealer network to offer complimentary on-site technical services for end users. Each program is designed to help producers and contractors in the aggregates, mining, construction and recycling industries to maximize uptime with their screen media and include local screening performance assessments, technical assistance, training workshops and more. “We strive to be a dedicated partner to our customers to help them maximize the success of their operation,” said Bernard Betts, MAJOR president. “We take pride in collaborating with our dealer network to provide customized resources and individualized training to set our customers and their crews up for success. With the anticipated surge in infrastructure development, ensuring efficient processes are in place will be more

critical than ever to keep up with material demand.” MAJOR certified dealers offer screening performance assessments to identify opportunities and offer solutions for improvement to increase plant uptime and screening efficiency. A MAJOR screening expert will visit the operation and collaborate with producers to collect data and operational parameters. Upon reviewing the data, the screening expert will provide a report that includes recommendations for improvement and outlines opportunities for growth. Technical assistance is also available through MAJOR’s dealer network. This involves a personalized plant visit where a local screening expert can address issues and make recommendations on optimal screening solutions. Each plant visit will include a vibration analysis test with MAJOR’s signature FLEXMAT Sensor. The app-controlled vibration analysis sensor enables readings of Source: Major

PROUD DEALER OF:

ATTACHMENTS & EQUIPMENT SALES AND RENTALS NEW & USED PARTS CALL US TODAY! 1-844-802-4490

www.arrowwest.com

screen box vibrations within seconds and generates a report, allowing MAJOR certified technicians to review results and fine tune an operation’s screen box without shutting down the equipment. “We strive to take extra steps to ensure our customers’ operations are staying productive and profitable. Utilizing advanced technology like our FLEX-MAT Sensor helps to achieve that,” Betts said. “The vibration measurement system allows a dealer to provide a more in-depth analysis on an operation, to improve the customer’s screening performance and profits.” Additionally, MAJOR and its dealer network offer aggregate and mining producers on-site training opportunities to optimize efficiency. The seminars educate plant managers, operators and maintenance crews on best practices for screen media usage and how to prevent inefficiencies. Operations can also request custom training sessions focused on specific challenges or applications. b

FMS attachments meet or exceed the competition in quality, ﬁt and ﬁnish with a one year warranty on materials and workmanship.

August 2022

Supply Post · Our Readers Are Your Buyers

Page 19

Kenny’s Loggin’

Port Neville Days Part Two in a series — see part one in the July issue, ‘Logging, Lunching, and Learning Loaders.’ I loaded my duffle bag and caulk boots into the back of the pickup. Dad and I headed for Kelsey Bay, where we would catch one of Alert Bay Air Service’s planes for the quick trip to Port Neville. Once off the plane, Dad said, “the flunky, Fred, will show you your bunk.” I wasn’t going to sleep in the office; into the bunkhouse with the men. The typical bunkhouse slept eight men. Walking in the door in the centre, there was an oil heater and bunch of nails on the wall for hanging and drying clothes. On the left and right were rooms with a single bed in each corner. I was in the room on the left with one other man in the room. The other side had

four men in it. My roommate was an older fellow named Bert, one of the boom men. He was a pleasant kind of fellow, with a well-developed chest and arms from working a pike pole for a few years. You wouldn’t want to arm wrestle him! He would

ONLINE Check out video and more photos at

SUPPLYPOST.COM/NEWS wake up to smoke every couple hours — he smoked “Old Chum” tobacco in a cigarette paper. What a peculiar aroma. After I got my gear put away, it was supper time.

VANDERVELDT EQUIPMENT PARTS LTD.

The first meal of the shift was usually wieners and beans. The cook was only into camp about an hour ahead of the rest of the crew, so there was never enough time to prepare a big meal. The men always complained about that! The next morning, Dad told me to go help the rigging crew, as Bill — the rigging slinger — was still passed out from his weekend binge. He was so drunk, he had driven right through the corner of the old “locomotive shed” at the Kelsey Bay Estuary, where cars parked to catch the plane. We don’t know how he made it from Campbell River to the plane dock! We had to help him down the dock and into the plane. When we got to camp, he got out of the plane and fell off the wharf. We threw him on his bunk

Pumps

Control Valves

Swing Motors

Continued on page 20

4335 BARGE TERMINAL RD. CAMPBELL RIVER, BC

$84,500

Final Drives

PARTS - PARTS - PARTS

FORESTECH EQUIPMENT $29,500

250-951-2082

NEW EXCAVATOR COMPONENTS • Hitachi • Deere

www. VeldtParts .com VISIT OUR WEBSITE FOR OUR FULL INVENTORY:

WWW.FORESTECH.CA Contact Tim Lloyd : 250-703-3551

$CALL

$184,500

$144,500

Rotair HR-1000 Hydraulic Rock Drill c/w: Atlas Copco 1238 hammer, 16’6” aluminum feed beam, Traxxon double knuckle boom, WBM ROPS cab, dust collector, 6-71 engine, mounted on Timberjack skidder carrier w/ 23.1-26 tires.

1999 Dynapac CA252D Vibratory Drum Roller, c/w: 84” vibratory smooth drum, ROPS canopy, Cummins B3.9D eng., 23.1-26 tires.

2014 John Deere 350G, c/w: 46” dig bkt, Brandt Q/C, Brandt hyd. thumb, hoe front, cab guard, catwalks, standard U/C w/ 32” TBP. 10,7XX hours.

1996 Madill 120 Swing Yarder c/w: Grapple, lines, 50’ live boom w/ fairlead, hyd. tilt cab, Cummins M11 engine, Allison HT740 trans., 34’ gantry w/ 3 guy lines, mounted on Madill D6 hydraulic drive crawler carrier w/ 28” TBP.

Kenworth 849RF T/A Deck Truck, c/w: Cat 3406B eng., 18 spd, Jake brake, water cooled brakes, spring susp., Clark BD101 rear planetary axles, 14:00X25 tires, custom built 12’9” W X 17’9” L steel deck w/ 10’ hyd. loading ramps. Recent new trans., brakes, diffs, planetaries, call for additional details.

YARDERS

LOG LOADERS

HYDRAULIC EXCAVATORS

WHEEL LOADERS

1989 Madill 123 Swing Yarder, c/w: Grapple, lines, 60’ boom w/ fairleads, hydraulic tilt cab, T-Mar “Log Champ” control system, 40’ gantry, Cummins eng., two guy lines, mounted on Madill hydraulic drive crawler carrier w 28” triple bar pads. Recent $250K in work orders. ......$839,500 STEEP SLOPE HOE CHUCKER

2019 John Deere 959ML c/w: T-Mar grapple, heel rack, harvester front, ROPS cab, fire supp. system, self levelling undercarriage w/ 28” SBP. 5,3XX hours. ......................................................$474,500 OFF HIGHWAY TRUCKS

Hayes HDX Pre Load T/A Off Highway Log Truck c/w: Cummins 444 eng., Allison 5960 trans., engine brake, spring susp., Clark BD91 rear planetary axles, 14:00X25 tires, hyd. fifth wheel plate. Equipped with Hayes Pre load trailer c/w: 2 X 14’ bunks, WB susp., KB axles, 14:00X25 tires......$54,500

2003 Kobelco SK370LL, c/w: Caterpillar 2017 John Deere 35G, c/w: Three buckets, 1999 Caterpillar 980G Logger c/w: 30” brush rake, 60” brush rake, single WBM log grapple, third valve, ROPS cab, GLS60 grapple, heel rack, log loader front, shank ripper, Q/C, hyd. thumb, cab, dozer west coast elevated rear entry cab on 72” blade, rubber tracks, 610 hours .....$67,500 Command Steering, 29.5X25 tires, forestry riser, Isuzu engine, forestry guarding pkg, guarding pkg. 18,588 hours. Good rubber, high walker undercarriage w/ 28” double 2006 Hitachi ZX350LC-3, c/w: Two buckets, ready to work! ..............................$179,500 bar forestry pads. ...........................$27,500 WBM Q/C, WBM hyd. thumb, hoe front, cab guard, catwalks, standard 24” triple bar MISCELLANEOUS 2000 Kobelco SK350MkIVLL, c/w: T-Mar pads. 12,8XX hours. Linkage r/b, exchange grapple, heel rack, LL front, west coast pumps, & new engine in last 3 years. Single Mobile Fuel Farm, c/w: Freightliner FLCelevated rear entry cab on 72” riser, shank ripper available. ....................$62,500 Cummins eng., forestry guarding pkg. w/ 2005 Caterpillar 308C, c/w: 24” Cat dig bkt, 12064-T T/A truck tractor, 40’ T/A high boy aux. fuel tank, highwalker undercarriage w/ 40” EFI Twist-O-Wrist bucket, Cat Q/C, EFI trailer, 2 X 1994 Tidy Steel Fab 9,000 Liter 28” DBP ..........................................$49,500 hyd. thumb, aux. hyd., hoe front, cab, 108” double wall fuel tanks, pump, meter, hoses hyd dozer blade w/ BOCE, standard U/C w/ 18” TBP. 4,464 hours. New swing bearing. and nozzle. Both fuel tanks certified July OFF HIGHWAY LOG TRUCK ........................................................$77,500 2022. Call for additional info ..........$24,500 2010 Western Star 4900 Tri Drive Log Truck, ROCK DRILLS c/w: Detroit Diesel DD15, 18 speed, triple diff 45 Meter Tripping Dry Sort Bunks c/w: 2 X locks, Vulcan V340 scales, Profab headache Morgan Power Apparatus M-40F Tank 10’ H X 11’ W tripping steel log bunks, steel rack, A/R susp., Bud aluminum wheels, Drill c/w: PR66 hammer, 18’ feed beam, GD 3800 boom, WBM ROPS cab, 850 plate filled with cement bases ..........$7,500 11R24.5 tires, 8’6” log bunk. Equipped with CFM compressor, Caterpillar 3306PC eng., 1994 Brodex tri axle log trailer c/w: S/A w/ mounted on M-40 mechanical drive carrier. 30 Meter Tripping Dry Sort Bunks c/w: 2 X spring susp., 11R24.5 tires, 8’6” log bunk, Low hours on rebuilt hammer, drill feed rear T/A w/ rubber blocks susp. Certified motor and planetary and rebuilt controls 90” H X 86” W tripping steel log bunks, steel ........................................................$44,500 valves...................................................CALL plate filled with cement bases ........$15,000

$59,500

2011 John Deere 350D LC, c/w: Two bkts, Brandt Q/C, Brandt hyd. thumb, hoe front, cab guard, catwalks, standard U/C w/ 34” TBP. 15,3XX hours. Single shank ripper available.

Page 20

Supply Post · supplypost.com

The bunkhouses at ‘Nob Logging’. Continued from page 19

in his wet clothes. It was a couple of days before he was in any shape to work. I wasn’t going to be stepping on his hand this time!

It was raining that day, and it didn’t take me very long to rip my new rain gear. The rain gear was a bit longer in the leg than I needed so the yarder operLarge to small, we do it all!

Working harder, so you don’t have to. Stocking new, used, and rebuilt parts & components for most makes & models.

FOR SALE:

• 24M Front Axle and differential • 777D Suspension and 3508 Engine and transmission • 854K/992K Transmission • Cat 980H Loader Boom • 2 - CAT 735/740 Final Drive/Brake Groups, Re-bearinged, and resealed. • Cat 320/322/325 Swing Drive • Cat 140M C-9 Grader Engine • Cat 735/740 Transmission And many more items!

Save on seasonal items like tire chains, oils & filters, cuttings edges & bucket teeth

Kamloops, BC., CALL GRAHAM: 250-851-1100 | 250-573-4181 (Office/Fax) | bgparts@telus.net www.bgparts.ca

ator cut both pant legs off so I wouldn’t step on them any more. One of the truck drivers was bringing his wife and two young daughters into camp, as there was a house available. On the flight in, the plane hit a seagull which scared the heck out of the wife. That would be the last plane ride and camp life was over for her! At the end of the shift Dad had to take them out in the boat. To this day, I am still in touch with Ian, the truck driver, and his youngest daughter, Carly. After work, the crew would have a bit of time before supper. One of the crew handed me a beer and said, “Here, young Smit (Dad’s nickname was Smit), have a beer — you worked hard all day with the men, you deserve a beer.” I found out later that I would have to repay that beer! I would get a ride with Chris in his Dodge Coronet R/T with a 440six pack for an engine. He would stop at the liquor store and buy me two dozen beer for $5.25. One dozen for the weekend, and one to take into camp. I drank beer for most of my life, only quitting in the last couple of years! When I stayed in the office at Easter, one of the things to do was to listen to the ‘radio telephone’. You could only hear one side of the conversation, so the guys would ad-lib the other side; pretty funny some-

August 2022

times! The call sign for our camp was ‘Nob Logging’, which got a few chuckles from the guys. We had a bit of time after supper, so mechanic Bobby Kerr taught me how to play chess. There was also a ping pong table set up in one of the bunkhouses’ games room. After supper one night, Hoss — one of the choker men — said to me, “Let’s go fishing!” He cut a small alder tree for a fishing pole and tied a short piece of fishing line on it. We got a piece of uncooked bacon and tied it on the end of the line. There was a small creek just a bit up the road. We would sneak up to one of the small pools, lower the bacon into it, and Bam! A small trout would chomp onto it. You could lift them out of the water before they let go. We let them all go as they were only about 6 or 7 inches long. One day, some of the rigging crew wanted to try ‘the belt and spurs’. We got into a pickup and drove up the road a bit to the garbage dump, where there was a usable tree right on the edge of the road. One guy was learning the spurs and was up the tree a bit when another guy said, “Bear!” We jumped into the pickup and took off, leaving him on the tree. We came back after awhile, big joke although he wasn’t very impressed. I learned some new words then. Another day, Dad sent

me to help Uncle Bert move the rock drill. There was a very large rock blocking the road being built, so he put a couple of holes in it and put in some ‘Amix’ powder to blow it into smaller pieces so the Cat could move it. I was shown how to move the rock drill, up the road to a safe place I went. Along came Uncle Bert with the Cat. The fuse was lit, and my uncle had a bit of a grin on his face. When I asked why, he said, “I was getting pretty warm loading the powder, and took my coat off and forgot it on the rock.” The rock was definitely in smaller pieces, and so was his coat. We had this special grease used in the couplings for the drill steels. If you left it out overnight, the bears would come and eat the whole 5 gallon pail

of it. You could see which way they went, they left deposits every few feet down the road. Sometimes, I would go with Dad in the speedboat to Kelsey Bay to pick up parts that were needed before the freight boat could deliver them, like a spring for the logging truck that was sitting waiting before it could get more loads. Apparently, that stretch of water off of Kelsey Bay was one of the roughest spots on the coast. The westerly wind blew right down Johnstone Straight and some currents from the channels in the area and the river met here creating a rough water zone. Not very nice boating conditions! I had a couple of Continued on page 21

EQUIPMENT FOR SALE

• Long reach Hitachi 50’ (wrist-twist bucket) .............. $42,000 • Cat 966D (quick attach Bucket and Forks) ................ $73,000 • 1994 Kenworth T800 ....................................................... $19,000 • 1993 AutoCar ................................................................... $17,000 • BJ Trailer.......................................................................... $13,000 All parts and buckets go with units. • Road Closure Signs (over 20) NEW ............................... $6,000 Prefer to sell as one lot.

Call Danny: (403) 340-9411 | dirtdanny@live.com

Current stock for motor graders Parts available for all Deere models and generations as well as Caterpillar 16M and 24M!

Refurbished:

Used:

Aftermarket:

Circle drive gearboxes, HFWD hubs, transfer drop boxes, & more...

Rims, circle assemblies, sheet metal, & more...

Moldboards, cab glass, steps, & more...

E-mail: usedparts@brandt.ca Inventory: brandt.ca/ValueParts

www.frontierpower.com

1-877-685-4886

August 2022

Supply Post · Our Readers Are Your Buyers

Owner Frank Norie; check out the exeme load on this Mack!

Page 21

One of the Clark skidders in action.

Clark 666 Ranger skidder stuck in the mud.

Unloading day.

Continued from page 20

frights travelling these waters and later when I worked in Jackson Bay for Dougans, same thing. Even flying in an airplane was pretty rough. We would often stop at the post office at Port Neville. My friend’s family — the Hansons — had homesteaded there since before the 1900’s. Later, a store and post office were

established there to provide services for the loggers, homesteaders, and indigenous people in the area. One night, three of us got into Chris’ speedboat and went up the inlet circling in behind Robbers Nob. Two of us got out of the boat and climbed up onto the flat spot near the end of the isthmus, then Chris circled back and scared the

ducks off the estuary, sending them straight at us. We stood up and shot a couple. Then we went and had a look at the petroglyphs. On the west side of Robbers Nob, near the tip, several petroglyphs can be seen below the high tide line. The property above the high tide line is private. It was in August when it got really hot. I was helping the rigging crew ‘tower up’, when things got a bit blurry. I can remember being in the office and the being in the boat, and then ride to the hospital in Mom’s car. I spent six days in the hospital getting my appendix out. Boy what a sweat box it was back at the camp; I was a bit dehydrated and they had to get my fluid levels back up

5425 Production Blvd., Surrey, BC, V3S 8P6 Phone 604.530.5758 Fax 604.530.3554

Toll Free 1.888.530.5444 FOCUSED ON PARTS FOR JOHN DEERE & HITACHI LATE MODEL EXCAVATORS

before they would operate on me. That marked the end of my summer work. It was back to school in September for me, with a bank account, and lots of knowledge about logging. The next two summers I helped Nories in the shop at Elk Bay. I would get a ride in with Hugh Gardiner, the shop foreman. He just

lived up behind our house in Painter-Barclay. I would walk up to his place and start the pickup. Then, he would come out and light a smoke, he was very good at keeping the ash from falling from his smoke, lots of times with at least half hanging on while he talked. I mostly hung out helping around the shop and Nories had started a ‘dry

sort’, so every day I would have to stamp logs from the previous days production. b Ken Wilson worked in the logging industry in B.C. for over 50 years. Ken is a regular contributor to Supply Post newspaper with his column “Kenny’s Loggin’”, and resides on Vancouver Island, B.C.

Service Centres: www.rollinsmachinery.com Langley, • Chilliwack • Parksville E-mail: jeff@rollinsmachinery.com

Phone: 1-800-665-9060 CK

N SI CK

SECA 900 ECO Combo Sewer Cleaner/Hydro-X Package The Model 900 ECO is a high performance unit combined with simplicity in operation & maintenance unequaled in the jet vac industry. COMING SOON: RAMVAC Hydro Excavator on Peterbilt Tri-Axle. Inquire for Demo.

O ST

MaxPowa R65m Street Sweeper Just arrived! Brand new MaxPowa R65m demo unit designed to tackle the toughest environments. The R65m is one of the most cost effective and efficient regenerative road sweepers on the market. This sweeper is the ideal solution to long cambered roads and urban environments.

OC ST

ST OC

Multihog MXC120 & CX75 Articulated Tractors Multihog One Machine, One Operator, Endless Applications. The Multihog tractor is a multi-purpose tractor which can carry out an array of tasks yearround including snow clearance, grass mowing and much more. Ideal machines for municipalities, contractors, facilities maintenance firms and more.

New Holland Construction Equipment 4 models of Skid Steer Loaders and Excavators available within the 3,000-15,000 lbs. range. Low financing available. Call today for your no obligation demo.

ST OC

Components · Cylinders · Cabs · Engines Undercarriage · Booms · Sticks · Linkage www.langleyexcavator.com | parts@langleyexcavator.com

Service Centres:

Langley • Chilliwack • Chemainus • Kelowna

1-800-665-9060

Supply Post · supplypost.com

Wajax Acquires Powell Canada’s Valve Business Wajax Corporation has announced that its whollyowned subsidiary, Tundra Process Solutions Ltd. has acquired the valve business of Powell Canada Inc. Specializing in valve sales, service and support. Powell Valve employs a team of thirty-eight, and operates facilities in Edmonton, Fort McMurray and Lloydminster, Alberta. Commenting on the acquisition, Iggy Domagalski, President and Chief Executive Officer of Wajax, stated, “The addition of three new valve servicing and repair locations, plus a

to the Tundra and Wajax families.” Founded in 1999 and acquired by Wajax in 2021, Tundra plays a key role in Wajax’s Industrial Parts and Engineered Repair Services growth strategy. It provides maintenance and technical services to customers in the western Canadian midstream oil and gas, oil sands, petrochemical, mining, forestry and municipal sectors. Tundra also distributes a diverse range of industrial process equipment, representing industry-leading manufacturers of valves and actuators, instrumentation and controls, motors and drives, control buildings, boilers and water treatment solutions. b

team of highly skilled technicians, will help accelerate the growth of Tundra’s core business.” Added Ash Allers, Chief Executive Officer of Tundra, “The acquisition adds substantially to Tundra’s valve servicing capabilities, including field-level support, and increases our geographic reach. The newly acquired facilities in Edmonton and Fort McMurray will also provide increased capacity for pressure safety valve testing, assembly and recertification. We are very excited to welcome Powell Valve’s exceptional team Source: Wajax

USED EQUIPMENT & MACHINERY FOR SALE OR RENT

$149,900 2017 ZX135US-6, 3,400 hrs.

$125,900 2007 Hitachi ZX135US-1, 2,800 hrs.

August 2022

Finning Announces Mining Contracts In Canada & Chile Finning International Inc announced the award of mining contracts in Western Canada and Chile. Our Canadian operation has entered into an agreement with Artemis Gold Inc. to supply Caterpillar mining equipment to the Blackwater Gold Project in British Columbia. Our South American operation has received a notice of award from Chilean stateowned copper producer, Codelco, to provide Caterpillar electric drive trucks to the Ministro Hales copper mine in northern Chile. In Western Canada, Finning will deliver primary and ancillary Caterpillar mining fleets to Artemis’ FINNING

Page 22

Caterpillar 793F Off-Highway Truck

our regions,” said Scott Thomson, president & CEO of Finning International. “We are very pleased to support Artemis Gold in Western Canada and to build on our long-term relationship with Codelco. These awards will expand our equipment population and drive our long-term product support growth as we support our customers in improving efficiencies, productivity, and safety, as well as reducing the carbon footprint of their operations. We continue to strengthen our competitive position in mining to support a transition to cleaner energy with Caterpillar’s electric drive and future zero emissions haul trucks,” he concluded. Finning International is the world’s largest Caterpillar dealer delivering unrivalled service to customers for nearly 90 years. Headquartered in Surrey, British Columbia, we provide Caterpillar equipment, parts, services, and performance solutions in Western Canada, Chile, Argentina, Bolivia, the United Kingdom, and Ireland. b

Blackwater Gold Project, including 793F off-highway trucks and hydraulic shovels, along with product support, over a 5-year period, with the term extendible for up to an additional 5 years at the option of Artemis. In Chile, Finning will deliver 13 Caterpillar 798AC electric drive off-highway trucks to Codelco’s Ministro Hales open pit copper mine and support the fleet under a 10-year maintenance and repair contract. Finning expects to start delivering the new trucks in the second half of 2022. These trucks will expand Ministro Hales’ existing Caterpillar truck fleet and are expected to enhance fuel efficiency and reduce emissions. “We continue to benefit from strengthening demand for mining equipment, product support, and technology solutions for existing operations, brownfield expansions, and greenfield projects in Source: Finning

250-268-7123 info@centralislandrentals.com

FOR SALE OR RENT $147,900 2017 Hitachi ZX135USK-6, 3,900 hrs. RENT OR BUY

$29,900 2006 Genie Z60/34 manlift, diesel power, good tires, no leaks or issues, 5,800 hrs.

CALL: 1-800-663-5454 2011 Deere 350D LC ........................................................................................................................... ON RENT 2012 Deere 350G LC .......................................................................................................................... ON RENT 1995 Deere 450G crawler ................................................................................................................. ON RENT 2-2006 Volvo A30D’s ......................................................................................................................FOR RENT 2013 Komatsu PC290LC-10, c/w 9,900 hrs, thumb, Q/C, and dig bkt ...........................................$109,900 2011 Hitachi ZX135US, 7,000 hrs 2 bkts ............................................................................ .$89,000 OR RENT 2013 Hitachi ZX135US-3, Blade ..............................................................................................................CALL 2015 HITACHI ZX135US-5, Blade ..............................................................................................................CALL 2012 Hitachi ZX135US-3, Blade ...............................................................................................................CALL 2007 Hitachi ZX135US-1, Blade, thumb, hyd coupler, 2 bkts ................................................................CALL 2017 Hitachi ZX135US-6, thumb, Q/C, 2 bkts 4,500 hrs ..................................................$144,900 OR RENT 2013 PC290LC-10, c/w 9,600 hrs., Q/C, dig, wrist available ............................................................$112,900 2018 Hitachi ZX135US-6, thumb, Q/C, 2 bkts .................................................................................. ON RENT

PARTS STORE: WWW.CONTINENTALEQUIPMENT.COM

MACHINERY SALES & RENTALS • KELOWNA, B.C.

PHONE: 250-769-5454 • FAX: 250-769-5005 continentalequipment.ca ALSO IN STOCK: ® Filters ® Cutting Edges ® Bucket Teeth ® Equipment Attachments ® OTR Loader & Rock Truck Tires

2020 John Deere 3154G Road Builder, c/w Thumb, Clean-up Bucket & Dig bucket, 700 Hrs., Very Clean, Still has lots of warranty ................................ $599,000

2018 John Deere 2154G Road Builder, Thumb, Clean up & Dig Buckets, 4,850 Hrs., WBM Lugging, Well Maintained..................$259,900

2018 Hitachi ZX245 Excavator, c/w Thumb, 2x Buckets, Guarded, 2,800 Hrs..................................$255,000

2018 John Deere 75G Excavator, 2,115 Hrs., Thumb, Clean up & Dig Buckets, Aux. Hydraulics, Rubber Pads, Blade, Very clean machine, ready to go to work!.......$135,000

The Local Source for your heavy equipment needs For more inventory visit:

centralislandrentals.com

August 2022

Supply Post · Our Readers Are Your Buyers

Page 23

360 DEGREES OF NO SURPRISES

FOUR CAMERAS

Our AAVM system sports four cameras, 360-degree views, and motion detection. Because risk is easier to avoid when you see it coming. OBJECT DETECTION

hceamericas.com

360° SEAMLESS VIEW

KAMLOOPS Phone: 877-372-2855 Fax: 250-374-2844

CRANBROOK Phone: 250-489-6131 Cell: 250-417-6884

PRINCE GEORGE Phone: 877-561-2456 Fax: 250-562-6353

VERNON Phone: 877-542-2280 Fax: 250-542-2674

FORT ST. JOHN Phone: 250-787-1789 borsetti@woodlandequip.com

www.woodlandequip.com • Email: sales@woodlandequip.com

Page 24

Supply Post · supplypost.com

August 2022

FEATURED USED EQUIPMENT $245,000

$239,000

37E10457 - Campbell River 2012 Hitachi ZX370F-3 13,932 hrs

$395,000

12E10424 - Vernon 2015 Caterpillar 325D 11,693 hrs

$427,000

8E10380 - Cranbrook 2016 Tigercat L870C 10,122 hrs

$115,000

7E10442 - Penticton 2020 Tigercat 632E 2,642 hrs

$74,000

37E10469 - Campbell River 2009 Tigercat L870C 18,877 hrs

37E10523 - Campbell River 2002 Komatsu WA500-3 25,331 hrs

$93,500

2E10481 - Castlegar

2015 CASE 590SN 4 4,982 hrs

$118,000

3E10426 - Kamloops 2014 Hyundai 3030-9WLL 11,827 hrs

$115,000

37E10469 - Campbell River 2009 Tigercat L870C 18,877 hrs

$209,000 $279,000

13E10416 - Prince George 2014 Komatsu PC290LC-10 7,694 hrs

$295,000

9E10488 - Terrace 2017 Link-Belt 4640TLW 8,532 hrs

$139,900

6E10460 - Quesnel 2015 Tigercat 630E 11,312 hrs

Call 250-900-3553 or visit inland-group.com

Inland and CASE Construction Equipment are thrilled to be the Presenting Sponsors for the 2022 Okanagan Dream Rally. For more information, visit inland-group.com/charitydrive

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER

SECTION 2

WWW.SUPPLYPOST.COM AUGUST 2022 · PAGE 25

Call Toll Free in Western Canada:

1-888-852-9021

WORLD LEADING MANUFACTURER OF MOBILE CRUSHING & SCREENING EQUIPMENT

RECYCLE MORE CONCRETE & ASPHALT IN STOCK POWERSCREEN TRAKPACTOR 320SR HORIZONTAL SHAFT IMPACTOR Hydraulic overload protection, Hydraulic adjustment 4-Bar, Twin Apron Impactor, 4.7 Cubic Yard Hopper, 13’ Vibrating Grizzly Feeder, 5’x11’ 2-Deck Post Screen with Recirc Conveyor, 55” Fines Conveyor, 39” Product Conveyor

SCREEN IT

WASH IT

MOVE IT

POWERSCREEN CHIEFTAIN 1700

TEREX WASH SOLUTIONS

POWERSCREEN CT100 - 100’ STACKER

5’x16’ 2-Deck Inclined Screen

Integrated Modular Wash Solutions

41”x 100’ Stacking Conveyor

Washing Systems

www.ForemanEquipment.com

Page 26

Supply Post · supplypost.com

August 2022

Call or Text: 604-940-8210 1-800-205-6633

hello@skreenquip.com

ALL EQUIPMENT AVAILABLE FOR SALE OR RENT

FOR SALE: used TEREX FINLAY J-1175

TEREX FINLAY 684 SCREENER

• Fully serviced, call for details.

• 14’ x 5’ 7” Triple Deck, Cat C4.4

50, 65 and 80 ft conveyors

NORDMANN K-750 HOOK LIFT JAW CRUSHER

• Available in Tracked or Wheeled, Electric or Diesel

TEREX FINLAY i-120rs Impact CRUSHER • Detachable recirculating 12’ x 5’ two deck screen

• Super Compact Hooklift Jaw Crusher

SCREENPOD S45 DUST CANNONS • Electric – stand alone or trailer mounted

FULLY STOCKED PARTS DEPARTMENT • CALL 1-800-205-6633 WEAR PARTS • FILTERS • BEARINGS • ROLLERS • SCREENS

REPRESENTING SAMSCREEN Wire Screens For All Makes!

7801 Vantage Way, Delta BC

skreenquip.com

August 2022

Supply Post · Our Readers Are Your Buyers

STAY SHARP. Futura Teeth and adapters are cast from chromoly and nickel to deliver greater strength and durability than any comparable teeth on the market. They feature approximately 20% more usable wear material than other similar systems in the market and 68% of the steel can be used without losing sharpness. That’s Powerful Value. Delivered.

brandt.ca 1-888-227-2638

FREE ADAPTERS For a limited time, receive FREE Futura adapters when you purchase three complete sets of Futura bucket teeth. See store for details.

Page 27

Page 28

Supply Post · supplypost.com

August 2022

RLC AGGREGATE EQUIPMENT McCloskey Introduces The

VIDEOS AVAILABLE UPON REQUEST

Option - 1 ·

A-1000 Fully automatic

Just select the tonnes/hr. you are running, and hit the Go button

Sample streams up to 1,000 tonnes/hr.

Collect up to a 3.5-gallon (13L) sample

1-Hand dumping action frees up your 2nd hand to hold a bucket; can be operated from either end of sampler

Constant travel speed through collection area ensures representative sample every time

Plugs in to any standard 110V, 15-amp outlet

Option - 2

VIDEOS AVAILABLE UPON REQUEST

M-500 (Manual operated unit)

Sample streams up to 500 tonnes/hr.

Lightweight for easy set-up

Collect up to 3.5-gallon (13L) sample

1-Hand dumping action frees up your 2 hold a bucket

hand to

Rental Equipment • Rent to own options • Financing Available

Powerful cone combines maximum mobility and high performance in a compact footprint . McCloskey International will unveil the new C2C as the latest entry into McCloskey’s cone crusher line, with the powerful MC200 cone on display at stand L1 at Hillhead 2022. The C2C brings the power of a 200Hp cone to a compact footprint offering high manoeuverability, with an exciting line-up of features aimed at boosting productivity. McCloskey mobile cone crushers have been de-

signed for superior performance while also achieving high capacity, better product quality, optimum versatility and improved fuel efficiency, and the C2C delivers on all. Standard features are far from standard including premium quality components, unrivalled ground level access, full-size MC200 cone, powerful engine, efficient conveyor design, and continuous load and material monitoring. The C2C delivers high production from material feed to end product stockpile due to its innovative

MCCLOSKEY

Check out our new line of RockPro Samplers

C2C Compact Cone Crusher

MCCLOSKEY

Quality Aggregate Equipment

material flow features. A low feed height, large 6.2m3 (8.1yd3) capacity Hardox-lined hopper allows for stop function, while the unrestricted feed opening improves intake capability and reduces the risk of blockage. As the material enters the cone chamber, features including a long stroke and high speed contribute to the high productivity, while ensuring the highest quality of end product with variable speed. Multi-layer crushing delivers great capacity, better reduction and shape combined with less liner wear. As the material moves to the class-leading heavy duty 48” wide conveyor, the large gap between the crusher discharge and main conveyor feeder enhance material flow. Stockpiles are formed up to 3.3m (10’ – 10”) and with ground level access the belt is easy to maintain and service. Power is built into the C2C, with a robust 280 Kw (375 Hp) engine on board, and high capacity fuel and hydraulic tanks to reduce the amount of re-fuelling intervals. Mobility on-site and between sites is facilitated with remote control tracks that easily move and position the crusher and maximize the efficiency of any project site. The C2C can be setup and ready to work in less than five minutes. Technology has been a key factor in the development of the C2C, with a 12” DSE control panel for the highest operational performance and reliability providing push button Continued on page 30

CALLING ALL CONTRACTORS!

➜

Call Jennie Today! 2016 SUPERIOR 36X136 SUPERSTACKER, Belt scale, remote, flow / travel / height / angle sensors. ......................... Call for more info

2013 FABTEC 5X16 - 3 DECK SCREEN PLANT, Unit has 50 hrs (min. usage as seen in photo), Perkins 275 hp genset, 15 yd3 feeder, 4 hyd. jacks. ......................... Call for more info

She’ll discuss our variety of print and online packages, and tailor them to your selling needs!

E: jennie.stevens@supplypost.com | P: 604-607-5577 TF: 1-800-663-4802 | Fax: 604-607-0533 L

CAL ME!

RLC AGGREGATE EQUIPMENT Visit our web page for full details and all our inventory listings at www.rlcaggregateequipment.ca Mike Waldner | 1-780-226-9458 | info@rlcagg.ca

Our Readers Are Your Buyers · Family Owned Since 1971

PHOTO CREDIT: TOWINGANDSCRAPCARREMOVAL.CA

Does your yard look like this? Need your equipment sold FAST?

August 2022

Supply Post · Our Readers Are Your Buyers

Page 29

604-856-7278

26290 Fraser Highway Aldergrove, BC V4W 2Z7

QH331HS HYDROCONE THE PERFECT COMBINATION ROCKPROCESSING.SANDVIK 705-677-5140 Robert.renaud@sandvik.com

Crushing Equipment In Stock Kodiak K300 Cone Crusher Kodiak K400 Cone Crusher JCI 6203 Screen Plant JCI 7203 Feeder Screen Plant 3055 Pioneer Jaw

New Sandvik Model QH441 Track Cone • Available for sale or rent

Hugh Porter 604-657-7167 hugh@lonetrack.ca

Call For Details

Used 2019 Sandvik QE441 Track Mounted HD Scalp Screen. 6’ x 18’ Two Deck. Cat C4.4-130 HP Diesel. 3,000 Hrs.

Call For Details

SALES / RENTALS:

New 2022 JCI K300+ Or K400+ IOC Plants. BC Legal Transport Cone Plants With In & Out Conveyors. In Stock.

Dawson Sloan 604-657-0065 dawson@lonetrack.ca

New QJ341 Sandvik Mobile Track Jaw • Feed opening 29” x 47” • 110,000 lbs. • 375 HP Cat power.

For Sale or Rent

SERVICE / PARTS: Rich Vernon 604-657-0177 rich@lonetrack.ca

For Sale or Rent

New 2022 Lonetrack/JCI 6203 or 7203 Feeder Screen Plants. BC Legal Transport. In Stock.

Call For Details

Two Used JCI GT200DF Track Cones • 45” Cone, 200 HP • Cat Powered, 4000 Hours • Refurbished & ready to run.

Call for Details

LONETRACK.CA

Supply Post · supplypost.com

Continued from page 28

control of the cone, track and feeder functions. The crusher is fitted with a telematics modem for the new 365SiteConnex program, a complete connectivity solution for highly

accurate monitoring of McCloskey products. As with all McCloskey equipment, safety is paramount, and the C2C is equipped with a number of features to ensure the workplace and the op-

INTERIOR HEAVY DUTY PARTS

erator are secure. Engine safety shutdown systems, start-up alarms, full safety guarding, external maintenance access and a tagout capability on the isolator all contribute to the safe operation and maintenance of the equipment. Ground level access also promotes safety, and allows for quick service and maintenance,

August 2022 cone, but also the ability to move their equipment easily on and around their sites. There has been no compromise in power or productivity with the C2C, and it is a perfect example of leveraging the best features from our existing cone crushers, and adding mobility based on how our customers use the equip-

ment every day. ” The C2C cone crusher will be formally introduced at Hillhead 2022, June 2123, 2022 in Buxton, UK. The crushers are suited particularly to aggregates, construction and demolition recycling, and aggregates. b

perior performance thanks to fully-sealed, brushless, maintenance-free AC electric drive systems, already have an incredibly low environmental impact. And, port and protects against although hydraulic leaks hydraulic leaks on the job- are rare on Genie E-Drive site, which can be costly or cause environmental issues when they occur. “An increasing number of jobsites, such as datacenters and environmentally sensitive areas, require a hydraulic oil containment system,” says Christian Dube, Genie Product Manager. “Spill Guard is an economical solution that fulfills these requirements and mitigates the risk of costly clean-ups on finished floors.” Genie E-Drive scissor lifts, which deliver more runtime per charge and su-

machines, the environmental impact is further reduced with the Spill Guard system, which covers the single point of possible leakage. b

reducing the downtime for the operation. “The C2C is another example of McCloskey designing and delivering on what our customers are asking for,” said Toni Laaksonen, Senior Vice President, McCloskey International. “We listened to producers who needed the power of a full size

Genie Announces Its Spill Guard Hydraulic Oil Containment System Is Available Globally

• Undercarriage • G.E.T. • Engines • Transmissions • Pumps

SERVING THE INDUSTRY FOR OVER 30 YEARS Servicing all major brands

CAT, HITACHI, VOLVO, KOMATSU, DEERE, HYUNDAI Parts, Service and Sales for Mining, Forestry & Construction.

Call today!

250.374.3443

INTERIOR DIESEL LTD. 728C Tagish St., Kamloops, BC V2H 1B7

The Genie Lift Tools Spill Guard hydraulic oil containment system is now available globally as a factory-fit option on Genie EDrive scissor lifts from 14 ft (4.3 m) to 40 ft (12 m). The Genie Spill Guard hydraulic oil containment system works with standard, square pads that do not require time-consuming cutting or fitting. A one-time factory installation of the easy-access, swing-out and bolt-in trays — which do not use or rely on magnets to stay secured — delivers a durable, economical solution that will not vibrate during trans-

MINING EQUIPMENT FOR SALE More photos at www.supplypost.com/dealers/global-asset-sales

4 ¼ SHORT HEAD CONE CRUSHER. Westpro Model CSH1300, complete, oil system, hydraulic system, Lincoln Lube system, belts, pulleys, electric motors, 56,000 lbs. Was over $250,000 new.

HAYWARD GORDEN PUMPS, SPX40, (2) SPX25, call for info.

ALPHAIR FAN, 11,200 Amp 6600 Mine fan, 1st discharge cone section support leg, 2nd discharge cone section, 3rd discharge cone section, inlet bell & screen, support leg, floating shaft, motor sub-base hardware, tall cone 384, 350 CFM @ 744 total pressure, 530HP, 710 RPM, call for more info.

CAIN HEAT RECOVERY UNITS

10.5 X 14 ALLIS CHALMERS ROD MILL, total rebuild, new trunnions, new Lincoln lube system, new steel liners, rebuilt 700HP motor, over $1.1m spent on the rebuild.

UNDERGROUND MINE DOORS, c/w air controls.

call for bulk pricing and data.

Call for details.

Source: Genie

Call Wayne 604-703-3673

WATER TREATMENT PLANT

ECO BURN INCINERATOR,

self contained in 40’ container.

750 lbs capacity primary chamber,

High output coated UV lamps,

1000 degree Celsius secondary

316L s/s electropolished axial flow reactors, 2 stage flow pacing. See website for lots of inside photos.

still in the box. 8 units available,

Source: McCloskey

chamber, diesel fuel day tank and piping package (500 gallon capacity), waste oil burner, day tank and piping package.

SQUARE D TRANSFORMER,

GASBOY DIGITAL DIESEL PUMPS,

call for details.

GENIE

Page 30

August 2022

Supply Post · Our Readers Are Your Buyers

Page 31

SALES: DARCY BRENNAN 587-873-9554 · WILLIAM THOMPSON 780-474-8082

CALL 1-833-601-6787 FOR ALL YOUR PARTS & SERVICE NEEDS PARTS: ASK FOR PETE GERRARD 587-873-1362

Your leading provider in aggregate handling and processing equipment! Serving Western Canada and the Territories

AGGREGATE · QUARRIES · SAND & GRAVEL · MINING · RECYCLING · CONCRETE · TOPSOIL

REVOLVER RT508 PORTABLE TROMMEL SCREENING PLANT · 5’ x 8’ Quick Change Drum with one · Kubota Diesel Motor 49HP piece screen · Hydraulic Landing gear · 4 Wheel drive with variable speed · Lined, low height, high capacity hopper · 36” Variable speed feeder · Overs conveyor Currently in stock! Also available Used Edge 622 Trommel Screening Plant

2022 KOLBERG / PIONEER MODEL FT2650 TRACK JAW CRUSHER · Cat C9.3 300 HP Tier 4 engine · 50” x 18’ Vibrating Feeder · Dust Supression System

· 2650 KPI Jaw · Available for sale or rent

· Cross bel magnet

2022 SANDVIK QH332 TRACK CONE CRUSHER · Cat C9.3 Tier 4 engine · Sandvik CH430 Cone Crusher · 40” Front Discharge Conveyor

· 8 Cubic yard hopper · Take up to 7” rock

NEW VALE INDUSTRIES 100’ X 36” RADIAL STACKING CONVEYOR · Martin Scraper · Landing Gear with pintle extension · Impact idlers in loading zones

Also available: · Vale Industries 80’ x 36” Diesel Stacking Conveyor · KPI 125’ x 36” Radial Stacking Conveyor with Gull Wing Axle · 60’ x 36” Radial Stacking Conveyors · KPI 190’ x 36” Superstacker

PARTS & SERVICE SPECIALISTS SERVING ALBERTA & NORTHERN TERRITORIES

Call us at 1-833-601-6787 Subscribe to our e-mail list for specials and much more!

chieftainequipment.com | frontline-machinery.com

Page 32

Supply Post · supplypost.com

WE SELL WHAT WE KNOW & WE KNOW WHAT WE SELL©

SALES • RENTALS • PARTS

Liebherr Launches New Five-Tine Grab GMM 50-5 The components of the new GMM 50-5 are made of sturdy cast steel as well as low-wear, highstrength steel sheets.

LIEBHERR

OFFICE: 780-463-7077 | CELL: 780-887-7123 email: grant@groundw.com • EDMONTON • CHILLIWACK (604) 991-9779 • SASKATOON • WE SHIP ACROSS CANADA

August 2022

NEW 720 & 617 ARRIVING SOON NEW 720 & 617 DOPPSTADT TROMMELS ARRIVING – GET YOUR ORDER IN FOR PURCHASE OR RENTAL EARLY!!!

620 TRIPLE DECK

RUBBLE MASTER 8500

620 HORIZONTAL TRIPLE DECK – OH FEED 2 CROSS CONVEYORS – JACKING LEGS W CORDS *** P.O.R. ***

5 X 18 TRIPLE DECK – CAT ENGINE – TIPPING GRIZZLY – 3 FOLD OUT CONVEYORS *** RENTAL OR SALE ***

200 HP CONE CRUSHER

RUBBLE MASTER RM 100GO!

NEW MINYU 200 HP HIGH SPEED CONE – TANDEM CHASSIS – INC. 200 HP MOTOR - PLC AND TOUCH SCREEN CONTROL *** P.O.R. ***

NEW 2022 RM 100 RATED TO 275 TONS PER HR. 37” X 28’ FEED OPENING 4 X 10 SCREENER **WEEKLY AND MONTHLY RENTALS AVAILABLE**

NEW POWER VAN

2021 DOPPSTADT SHREDDER

53’ AIR RIDE VAN – NEW 10’ CAB – DIESEL TANK DOUBLE WALLED DIESEL TANK – INC SWITCH GEAR

DOPPSTADT TYPE 6 INVENTHOR SHREDDER 340 HRS, SINGLE SHAFT, VARIOUS SPEED INC. REVERSING - MAGNET *** P.O.R. ***

NEW 2022 KOMPLET JAW

NEW 2022 KOMPLET SCREENER

DESIGNED FOR SMALLER SITE. DIESEL, SELF CONDITIONED. – IDEAL FOR ROCKS, CONCRETE, ASPHALT, CINDER BLOCKS, BRICKS. REMOTE CONTROLLED.

SELF CONTAINED 4’ X 8’ DOUBLE DECK 2 FOLD-OUT CONVEYORS – VARIABLE SPEED FEED – IDEAL FOR SMALLER SITES, TOPSOIL, SAND & GRAVEL.

Go to our website to see all equipment listings

WWW.GROUNDWORX.CA

Recycling and scrap handling are some of the toughest applications in industrial goods handling. Robustness, reliability and efficiency are required therefore, choosing the right attachment for the job is key for efficient and economical goods handling. With the five-tine grab GMM 50-5 Liebherr has developed a new attachment that fully meets these special operational requirements. A comprehensive portfolio of buckets as well as a wide selection of optional equipment means that diverse materials can be handled efficiently and economically in recycling and scrap handling. Only top-quality materials are used for the manufacture of the new grab. The GMM 50-5 is available for material handlers with an operating weight from 35 to 55 tonnes. Extremely Robust And Resistant The components of the new GMM 50-5 are made of sturdy cast steel as well as low-wear, high-strength steel sheets. The consistent use of the high-quality materials guarantees extreme stability and resistance for the toughest applications and material handling scenarios. The special shape of the tine support and the buckets was developed based on state-of-the-art calculation and simulation software. Thanks to this modern development process, the new grab is extremely robust and resistant despite its low dead weight. Focus On Maximum Service Life And Performance In the design phase special attention was paid to maximum service life:

In order to split the high torque, the slewing drive, for example, was equipped as standard with two motors. This increases the service life and minimises wear considerably. Both rotary transmission and the reinforced slewing drive are sealed multiple times to give maximum protection against external factors such as dust and water. Large and flow-optimised oil ducts not only ensure fast work speeds, but also efficient machine operation. The sealed, antitwist piston rod protection for hydraulic cylinders is also included with the grab as standard. The latter come with new cylinder kinematics, which also guarantee a long-lasting and good closing mechanism also when the tines become worn. A newly designed wear back on the tines also extends the service life immensely. Long-lasting good and precise penetration in diverse scrap and recycling materials is due to the special shape and alignment of the tine tips. They are made from a new type of material for a long service life.

Easy Servicing And Numerous Options As the lubrication points are arranged ergonomically and logically, the GMM 50-5 is supplied with the necessary lubrication in a very short space of time. Perfect tolerances and generously dimensioned bearing surfaces lead to gentle interplay of the individual components. Thanks to the optional motor and hose protection damage to rotary motors and hydraulic lines is minimised. An optional central lubrication system assumes regular, automatic lubrication of all central points. The GMM 50-5 can be equipped with shackles to protect magnetic plates. In order to protect the edges of the often highly stressed internal sheet of the grab against wear and tear, the tines can be equipped with a reinforcement set of wear-resistant sheets. Three different tines shapes The GMM 50-5 is designed specially for optimal grabbing of mixed and shredder waste as well as chippings or shavings with content of up to 1.10 m. The arrangement and shape of the tines are optimised for perfect penetration and holding of bulky and at the same time loose material. There is a choice of three different tines for handling diverse materials: The version with open tines is perfect for handling large-size and bulky scrap objects. The version with semi-closed tines is ideal for medium-sized, mixed materials and shredding waste. Small, fine materials and chippings or shavings can be handled most effectively with the closed, heart-shaped tines. b Source: Liebherr

Looking for the Classiﬁeds Section? Find the Classifieds and Cost Cutter “Yellow” Ads, and Truck Photo Ads in their new location: Section 3, page 49!

August 2022

Supply Post · Our Readers Are Your Buyers

Page 33

682 Okanagan Ave. E., Penticton, BC, Canada

1-866-344-6480

cturchak@brutusbodies.com

YOUR TRUCK BODY BUILDING SPECIALISTS

DOZENS OF RAM 5500 CHASSIS ARRIVING IN 2022, CALL BRUTUS TODAY TO RESERVE A TRUCK FOR YOUR CUSTOM SERVICE BODY BUILD. MARANDA M140 & M170 CAB HEIGHT SLIP IN CANOPY

MARANDA X210 & X240 MID HEIGHT SLIP IN CANOPY

www.brutusbodies.com

MARANDA V335 & V375 FULL HEIGHT SLIP IN CANOPY

Page 34

Supply Post · supplypost.com

Doosan Manufactures First DD100 Dozer For North America Hyundai Doosan Infracore (HDI) successfully shipped the first Doosan dozer model DD100, a 9-metric-ton dozer targeted at the North American market. HDI also produced two additional pilot machines and shipped them to North America for various performance tests, sales, marketing and service training. The mass production of the Doosan DD100 began in June 2022 and will launch in North America in the third quarter. With the

launch of the dozer, HDI hopes to create synergies with its existing excavator and wheel loader models. “This is the next significant milestone in the development of the new Doosan dozers,” says Mr. Edward Song, CEO of Doosan Infracore North America. “Our North American dealers and their customers are eager for the arrival of the new Doosan dozers. We look forward to launching the new line of construction equipment later this year.”

This dozer model was the first to be produced through the collaboration of various departments at HDI, including development analysis, market research, competitive benchmarking, validation and pilot vehicle assembly. In addition, purchasing and quality teams investigated parts supply while production teams completed the first production dozer model. HDI has als o set plans for its 13-metric-ton dozer — the Doosan DD130 — and will be shipping a pi-

August 2022 lars, maximum glass area and a standard rearview camera — plus LED lights and front, rear and side wiper blades. The DD100 features a Doosan engine with convenient maintenance access points and does not require the use of a diesel particuCheck out more photos late filter to meet current emission standards. Dooand specs at SUPPLYPOST.COM/NEWS san DD100 owners can add the 3D Machine Guidance and 3D Machine Control erators complete control features as an option for from a convenient, easy-to- greater accuracy and ease read touch screen. It also of operation. b offers superior visibility with minimized front pil- Source: Doosan

lot machine later this year. tors in mind, the DD100 The company plans to start features the 8-inch Smart production, possibly as Touch display, giving opearly as February 2023. About the DD100 Dozer The new 122-hp DD100 dozer expands the lineup of durable, rugged Doosan construction equipment. This new machine delivers powerful pushing performance, fuel efficiency and all-day operator comfort. It’s built for the most demanding conditions and features a dual/single flange-type roller with several track guard options. Designed with opera-

ONLINE

1-844-MORMAK1 SALES, SERVICE, RENTALS, PARTS | MORMAK.COM

DOOSAN

Mormak Equipment is Western Canada’s PREMIER AGGREGATE EQUIPMENT SOLUTIONS PROVIDER Mormak Custom Plants or Cedarapids factory plants — Mormak customers get options

HYDRAULIC BREAKERS

DESIGNED TO HANDLE THE TOUGHEST ROCK EXCAVATIONS AND LARGE CONCRETE DEMOLITION PROJECTS.

Mormak Custom 1645-II Closed Circuit Cone Plant

Strong Heritage, Strong Future

3 YR LIMITED WA R R A N T Y

DUAL SPEED IMPACT FREQUENCY ALLOWS THE HAMMER SPEED TO BE ADJUSTED FOR MAXIMUM PRODUCTIVITY.

Our guiding principles are experience, honesty and trust. We stand behind more than 3,000 pieces of equipment in the field.

Mormak Equipment becomes JP Conveyor Dealer. Call today to inquire about your crushing equipment needs. MAGNUM ATTACHMENTS WILL GIVE THE WORKING END OF YOUR MACHINERY

(AB / YT / NWT)

SUPERIOR PERFORMANCE AND DURABILITY.

2214 9TH LINE, BRADFORD, ON L3Z 3T1

VERNON, BC 8140 Becketts Rd.

CHILLIWACK, BC 7912 Atchelitz Rd.

CALGARY, AB 6969 84TH St. SE

EDMONTON, AB 27321 Acheson Rd.

416.679.8752 | 1.877.640.2862 | FAX 416.679.8753

August 2022

Supply Post · Our Readers Are Your Buyers

Page 35

Kobelco Construction Machinery USA Inc. (KCMU) is pleased to announce the launch of the all new SK260LC-11 to its line-up of industry leading construction machinery. This next generation -11 machine delivers superior performance, greater efficiency, more productivity, and follows the Kobelco Performance By Design concept for outstanding operator-based performance and comfort in this competitive class. Since the development of the first generation ‘SK’ series 25-ton Kobelco excavator in 1983, this size class has grown in popularity due to its versatility in various general construction applications. Equipped with a new TIER IV Final Yanmar engine, the new SK260LC-11 delivers 194 NET HP and 577 lb.-ft. of torque at 1,500 rpm, which is a 23% increase in torque vs the previous model. With 42,000 lb. of bucket digging force, 63,300 lb.ft. of swing torque, and 55,600 lb. of drawbar pulling force, the Kobelco SK260LC-11 surpasses the competition with more digging and operating power. The new -11 series offers more standard features and overall added value than previous models. Smooth and steady operation while moving heavy objects across the jobsite is assured through the ‘Independent Travel’ function, which dedicates one hydraulic pump to

travel and one to the attachment on a continuous basis. The machine’s 60,200 lb. operating weight provides increased stability and superior lifting capacity. And, like most Kobelco heavy excavators, the SK260LC-11 has three work modes: Eco, S, and H mode for balancing between high performance, economy, and low fuel consumption. Heavy Lift and Power Boost (with unlimited time use) add the power needed to get through the toughest conditions, and the in-cab hydraulic pressure release function allows customers to change work tools or hoses easily and safely. The new SK260LC-11 also provides improved durability – many major components have been redesigned for improved durability and performance. For example, the machine’s side panels have been made thicker to enhance body rigidity, while the increased diameter of the bucket cylinder pin contributes to enhanced durability for using various work tools. For those needing Machine Guidance options, the SK260LC-11 comes with pre-installed mounting brackets for easier system installation without the need to weld and paint. These brackets are designed to adapt to multiple brands of providers for both 2D and 3D systems. As part of Kobelco’s Performance By Design concept also seen on the SK75/85SR-7 and

Looking for the Classifieds? We moved them to Page 49!

SK130LC-11, the SK260LC11’s cabin, ergonomics, and safety features are greatly enhanced. These excavators also feature best-in-class cabin space and visibility. Standard features also include a 7-way adjustable heated air suspension seat that moves together with the armrests and hydraulic controls. This uniquely designed cabin reduces operator fatigue, provides excellent shock absorption, and superior ride comfort. The operator’s pilot levers move horizontally without arching of the wrist, while also providing shorter lever strokes to deliver a swifter, more precise movement. Air conditioning and heater vents are directed towards the operator to maximize comfort. The right-side jog dial integrates multiple functions into a single user interface with the large 10-inch color monitor. The easy-to-operate menu screen facilitates reading of important information including work mode, maintenance intervals, and fuel consumption, as well as providing a 270-degree view from the machine’s standard three camera system. The hydraulic flow-rate modes of the bucket, breaker, nibbler, and rotating grapple are also now fully adjustable by the operator through the monitor, and the mode settings for other attachments, such as a tilt rotator, can also be easily added or changed. In ad-

KOBELCO

Kobelco Launches Next Generation SK260LC-11 Excavator

dition, all internal switches and dials in the cabin have LED backlighting to provide a bright, clear view in the dark. To top it off the cabin is equipped with

a FM/AM, AUX, Bluetooth, hands-free telephone radio, smartphone holder, USB charger, and a 12V power outlet. Easy maintenance is as-

sured with a standard radiator clean-out screen that prevents larger material from clogging the radiator cooling fins and can be easContinued on page 36

Camrose AB.

Don: 780-678-4703 dswequipment.com P.O.R.

2015 20 YARD, 36’’ FEED BELT, Hyd. tipping grizzly, plant mounted electrical.

P.O.R.

2011 HD 42’’ X 70 FT. RADIAL STACKER, Hwy. portable, cord package.

P.O.R.

2007 CLEMRO 30’’ X 120’ RADIAL STACKER, full hyd. package, electrical panel.

2016 SUPERIOR 36’’ X 60’ TRIPLE STACK, Hwy. portable. Excellent condition.

P.O.R.

1996 VOLVO 200 KW 480-VOLT, 6,799 engine hours, C/W 230-gallon fuel tank.

P.O.R.

2014 CUMMINS QSK 600 KW, 480-volt prime power unit, 6,504 original hours.

2008 CUMMINS NTA855G3 350 KW 600-VOLT, 162 original hours.

P.O.R.

2013 30 YD SURGE BIN, 48” discharge conveyor, bin vibrator, cord pkg.

AUTHORIZED DEALER FOR FABTEC EQUIPMENT IN BC & AB | DSWEQUIPMENT.COM

Page 36 Continued from page 35

ily removed for cleaning. A newly structured hydraulic oil filter prevents foreign matter from entering the oil tank during maintenance, and all filters are easy to access from ground level.

Supply Post · supplypost.com For safety, a heavy-duty Level II overhead top guard is provided as standard and can be tilted open for easy window cleaning. Additionally, rear swing flashers and rear work lights, a Kobelco USA exclusive, are

integrated into the counterweight for added safety on busy jobsites. Seven LED lights (2 on boom, 2 on top front of the cab, 1 on right side body, and 2 facing rear on the counterweight) are also now standard to pro-

vide additional visibility in low light conditions. Monitoring the SK260LC-11’s work status remotely has also never been easier with KOMEXS (Kobelco Monitoring Excavator System). The ma-

August 2022 chine’s operational information, such as hours, fuel consumption, and maintenance status, can be obtained remotely. For added convenience and security, an engine start alarm, efence, and current/past location history are also included – ideal for operators of large fleets and multiple locations. To complement our added value package and commitment to quality, the new SK260LC-11 has a standard 4 year/4,000 hr. full machine warranty with KOMEXS included while covered by factory warranty. Additional extended warranty coverage terms are available. Since 1930, Kobelco excavators are built to be leaders in the industry for quality, innovation, and

performance. The new SK260LC-11 is just one of the many new models Kobelco is excited to bring to the North American market in 2022/2023. Kobelco Construction Machinery USA offers industry-leading crawler excavators in the 3,000 lb. to 185,000 lb. classes including zero tail swing, compact, standard, long reach, high and wide undercarriages, mass excavation, auto recycling, and demolition models. Wellknown as the excavator authority, Kobelco is committed to producing quality machines with advanced productivity-boosting features and innovative technologies. b Source: Kobelco

Looking for the Classifieds Section? Find the Classifieds and Cost Cutter “Yellow” Ads in their new location: Section 3, page 49!

WE ASK THE RIGHT QUESTIONS TO PROVIDE CREATIVE SOLUTIONS. Committed to Your Long-term Success Winnipeg,MB

Regina, SK

www.genagg.ca

Supply Post · Our Readers Are Your Buyers

Preparing For Disaster Response With CASE In preparation for continued tornado, hurricane, and disaster response, CASE Power & Equipment of Florida and CASE Construction Equipment each provided equipment and attachments to veteran-led disaster response organization, Team Rubicon’s latest Disaster Training Camp, held at the Camp Shands Boy Scouts Camp in Hawthorne, Florida. The training camp prepared Team Rubicon volunteers for the work they will encounter in real disaster deployments, while simultaneously completing site improvement projects at the Boy Scouts camp. The disaster training included heavy equipment operators — working with CASE compact track loaders and grapple buckets — training alongside sawyer (chainsaw) teams to showcase real world route clearance and disaster cleanup

operations critical in tornado and hurricane responses. The training event resulted in 26 new sawyers and sawyer instructors responsible for clearing trees and debris, as well as three new or elevated heavy equipment operators, who use the loaders to remove and stockpile debris. This includes route clearance activities, as well as yard cleanup and demolition work that Team Rubicon performs for free in the wake of disasters. “The Florida Disaster Training Camp is critical to our operations and was a success, largely because of the support provided by CASE and CASE Power & Equipment of Florida,” says Patrick Wright, heavy equipment associate at Team Rubicon. “These camps give our volunteers the time and training needed in a safe, non-disaster environment that ensures

our teams are familiar with the tools, communications and processes we use in disaster response operations.” CASE and Team Rubicon have a long history of working together in Florida, including an extensive deployment to Mexico Beach, Florida in the wake of Hurricane Michael in 2018. Most recently, Team Rubicon heavy equipment teams have responded to the tornados that ravaged Kentucky in December 2021, wildfire cleanup in California, and ongoing rebuild around Hurricane Harvey in Texas. “We are here to help Team Rubicon do the heavy lifting,” said Jody Beasley, director of national equipment sales, CASE Power & Equipment of Florida. “The work that Team Rubicon does to lift people up on their worst days is inspiring to our entire team be-

Page 37

“Disaster Training Camp” created 26 new sawyers and sawyer instructors; as well as three new heavy equipment operators for future deployment to disaster sites throughout North America.

cause CASE is dedicated to helping support, build and rebuild our communities. It’s our honor to provide equipment and support to train volunteers for showing up to do the hard work in Florida and across the country.” The event helped three Team Rubicon volunteers achieve Heavy Equipment Operator 1 (HEO1) or Heavy Equipment Operation 2 (HEO2) ratings with Team Rubicon: Lisa Dellinger (HEO2), David Skillman (HEO2), and Lyn

Farias (HEO1). Team Rubicon serves communities by mobilizing veterans to continue their service, leveraging their skills and experience to help people prepare, respond, and recover from disasters and humanitarian crises. Founded in 2010, Team Rubicon has deployed across the United States and around the world to provide immediate relief to vulnerable communities who have been impacted by hurricanes, tornadoes, COVID19

and more. CASE first partnered with Team Rubicon in 2015 to develop a heavy equipment training program for its volunteers for the safe and effective use of construction equipment in disaster operations. For more information on the partnership between CASE and Team Rubicon to support communities in response to natural disasters, visit CaseCE.com/TeamRubicon. b Source: CASE CE

www.MachinerySupply.ca

gwheeliker@machinerysupply.ca

NOW HIRING!

We are the fastest growing aggregate and mining supplier in Western Canada! Machinery Supply is looking for great people to join our team! We are currently looking for welders, millwrights, and mechanics. We offer competitive pay, great benefits, and an RRSP matching program! Call us at 403-503-7877 or email your resume to bmcmadam@machinerysupply.ca

wWestern Canada’s

Distributor

EQUIPMENT FOR SALE: ■ ■ ■ ■ ■

NEW 2022 Fabtech 6x20 3 Deck Feeder Screen – Now in Stock! Call us for more details!

■

2 Bare Power Vans – Ready to customize 6X20 and 7X20 Screen Plants 300 and 400 HP Cones 2054 Jaw Crusher 125’ Pinnacle Radial Stacker Several Bin Feeders Call for more details!

CASE CE

August 2022

Superior RazorTail Truck Unloader – 1000 TPH Capability, Wireless Remote Control, Switchgear On Board, 48” Folding Discharge Conveyor.

Parts in stock to keep your plant running! Gear boxes, bearings, wear parts and more. Call Today!

Alberta/Sask: 403-503-7877 | BC: 778-771-3330 | Manitoba: 204-998-9398

Supply Post · supplypost.com

August 2022

YANMAR

Page 38

The ViO80 benefits from a zero tail-swing design, an innovative feature pioneered by Yanmar, allowing the excavator to rotate next to a structure with far less risk of hitting it.

anmar Compact Equipment offers the ViO80-1A and SV1002A, the largest models in their mini excavator line. The machines provide the performance, efficiency, technology and reliability needed for tough jobs, allowing for maximum productivity in construction, landscaping and utility applications. Both models feature Yanmar Compact Equipment’s industry-leading fouryear/4,000-hour bumper-to-bumper mini excavator warranty. The ViO80 features Yanmar’s signature zero tail-swing and the SV100 includes an ultra-tight tail-swing. The ViO80’s zero tail-swing design, an innovative feature pioneered by Yanmar, allows the excavator to rotate next to a structure with far less risk of hit-

ting it. The larger SV100’s ultra-tight tail swing has just 6.7 inches of overhang. Both designs allow efficient work in tight jobsites, as found in residential construction or road and utility work that may be difficult for larger equipment. Trusted Performance The mini excavators offer exceptional performance for their

ONLINE Check out video and more photos at

SUPPLYPOST.COM/NEWS size classes. The 8-tonclass ViO80 weighs in at 18,136 pounds with 56.9

horsepower and a maximum digging depth of 15 feet, 4 inches, while the 10-ton class SV100 has a 21,550-pound operating weight while providing 72 horsepower and a maximum digging depth of 15 feet, 9 inches. “Contractors sometimes think they have to sacrifice comfort and performance to find a machine that will do work in tight quarters,” said Jeff Pate, director of sales for Yanmar Compact Equipment North America. “It’s always fun to be the guy that tells them about our 8- and 10-ton mini excavators. They can take more machine to the job than they thought possible with our zero and ultra-tight designs. And we pack in so many convenience features — like our patented hydraulic quick coupler —

YANMAR

Meet Yanmar’s Largest Mini Excavators: ViO80-1A & SV100-2A it adds up to a secondto-none experience for the customer.” Efficiency and Convenience The ViO80 and SV100 offer several convenience features that promote operator comfort and easy operation. Standard features include ECO Mode, Auto-Decel Mode and auto shift 2-speed travel. ECO Mode helps extend engine life, lengthen oil change intervals and reduces fuel consumption by reducing engine speed and power draw when not needed. The mini excavators’ auto shift 2-speed travel design conveniently shifts the machines between low and high range automatically, making switching between jobsite tasks and longer travels seamless for the operator. As an added convenience, Yanmar’s hy-

The larger SV100’s ultra-tight tail has just 6.7 inches of overhang. Both designs allow efficient work in tight jobsites, as found in residential construction or road and utility work that may be difficult for larger equipment. draulic quick coupler comes standard on the ViO80 and SV100. The feature allows fast and easy changing of attachments. Aside from fitting and removing the safety lock pin, the entire task can be completed with the flip of a switch while

the operator is seated in the comfort of the cab. Both machines have spacious cabs designed to provide maximum elbow and leg room. The mini excavators feature standard heating and air conditioning systems and Continued on page 39

Supply Post · Our Readers Are Your Buyers

Continued from page 38

sturdy, sound-blocking, anti-vibration construction for a smooth quiet ride and a comfortable operator experience all year round. The SV100 includes a lever-controlled backfill blade, adding even more application versatility, along with an LCD monitor displaying key operating information and maintenance interval notifications. Leading Telematics Technology The mini excavators both come with SmartAssist Remote, Yanmar’s telematics system, free for five years on qualifying machines. Using the integrated theft protection, the mini excavator’s owner can set a range from a specific location or a starting time, triggering SmartAssist Remote to send a notification if that range is exceeded. SmartAssist Remote can also detect errors with electronic components and send notifications to service personnel and directly to Yanmar to streamline the diagnostic process. Additionally,

the machine’s owner can view the operational status of the equipment in real time and view daily work reports that track use of the excavator, useful data that can improve jobsite productivity over time. Finally, SmartAssist Remote can track maintenance intervals and inspection items as well as notify the owner via email about upcoming maintenance requirements. Warranty-Backed Reliability Both machines are powered by a fuel-efficient Yanmar Tier 4 Final engine, offering customers legendary Yanmar engine reliability and performance. The mini excavators also feature a standard 2nd PTO with flow control for maximum utility. Yanmar Compact Equipment offers one of the industry’s best warranties on its mini excavators — a 4-year/4,000-hour bucket-to-counterweight warranty — reinforcing its claim of industry-leading reliability. b Source: Yanmar

Page 39

Evoquip Launches Sustainability Campaign – Think Green, Think Evoquip EvoQuip have taken a step towards sustainability in launching a campaign to illustrate their commitment to creating a sustainable future. The “Think Green, Think EvoQuip” campaign was launched in April 2022 and demonstrates continued growth by creating equipment that is increasingly sustainable. Barry O’Hare, Business Line Director for EvoQuip said: “Sustainability is a strategic priority for us and consistently at the top of our agenda. We see it as our responsibility to do what we can to be as sustainable a company as possible, and to help to build a world that puts sustainability at the forefront of everything we do.” The new campaign shows EvoQuip’s commitment to this important topic and demonstrates continued growth by designing and creating equipment that is increasingly sustainable. The compact crushing and screening brand have also posted a sustainability re-

sponsibility statement on their website stating 4 key commitments. These are the production of sustainable equipment that is as kind to the environment as possible, whilst still being effective and ecofriendly in its use, this is both in the design stage of the products and in the physical processing of material. The use of sustainable materials where possible in the production of all equipment, parts, and packaging to help to ensure the products are sustainable from design, to the finished product, to operation. Offering the best solution to customers to ensure their operation is as efficient and environmentally friendly as possible. They promise to comply with any and all legislations and health and safety requirements. Recycling is an important industry for EvoQuip, with over 40% of equipment out in the field working in a recycling application. The entire EvoQuip range provides the ideal so-

WE SELL WHAT WE KNOW & WE KNOW WHAT WE SELL©

SALES • RENTALS • PARTS

EVOQUIP

August 2022

Cobra 230, Jaw Crusher, C&D Skip Waste

lution for generating profit from waste. It is possible to process many types of waste from which can then be reused as product on site or sold. EvoQuip will be increasing their selection of hybrid/electric offerings over time, one of many things that they will be doing as part of this campaign. This as well as fuel consumption monitoring, assessing and reducing carbon footprint and reducing waste to landfill will help EvoQuip live up to the name of the campaign “Think

Green, Think EvoQuip”. Their economic contribution comes in the form of reducing machine running costs, turning waste into profit and having a more measured approach to research and development to name but a few. This whilst also ensuring their training to operators is current and constantly and consistently updated to ensure that operator know the most economical way to operate and service the machines. b Source: EvoQuip

OFFICE: 780-463-7077 | CELL: 780-887-7123 email: grant@groundw.com • EDMONTON • CHILLIWACK (604) 991-9779 • SASKATOON • WE SHIP ACROSS CANADA

NEW EQUIPMENT LINE FOR THE GROUNDWORX COMPANY The Groundworx Co announces it is now Dealer for the KOMPLET line of equipment in Western Canada. This high quality equipment is designed and built in Italy to fill a need for “Smaller Contractors” and smaller jobs.

IN STOCK

2022 - 704 Jaw Crushers

2022 - 5030 Screener

• Compact Screeners, Jaw Crushers & Shredders • Extremely Portable for Transport

2021 - Krokodile Shredder

• Track Mobile – Remote Controlled • Jaw & Shredders come with Magnets

Ideal for processing Concrete, Asphalt, Rocks, Sand & Gravel & Wood Waste Daily, Weekly & Monthly Rentals Available – CALL 780-463-7077 to BOOK Your FREE DEMO

FINANCING AVAILABLE O.A.C • WWW.GROUNDWORX.CA

Page 40

Supply Post · supplypost.com

August 2022

SALES & RENTALS

SCREENERS • CONVEYORS • CRUSHERS

1-800-960-9939 | 403-946-4860 | Fax: 403-946-5191

WESTERN CANADA’S PREMIER McCLOSKEY DEALER CANADIAN MADE EQUIPMENT THAT’S BUILT TO LAST!

USED EQUIPMENT FOR SALE

USED 2020 McCLOSKEY 512R TROMMEL (1020 HOURS, LOTS OF SCREEN SIZES AVAILABLE)

NEW 2022 McCLOSKEY ST80TV-LA TRACKED V-BIN WITH LIFT-AXLE

USED 2018 McCLOSKEY S130 2DT SCREENER (2000 HOURS TIER 3 CAT ENGINE)

NEW 2022 McCLOSKEY ST100TF FEEDER STACKER (7.5 CU.YD HOPPER ADJUSTABLE HOPPER HEIGHT)

NEW 2019 McCLOSKEY 36”X125’ HD E STACKER (LIFT AXLE FOR RADIAL CAPABILITIES)

USED 2020 McCLOSKEY 516 REG TROMMEL (HYDRAULIC TIPPING GRIZZLY, SCREENS OF CHOICE)

USED 2019 ELRUS CH430 PL CONE CRUSHER

NEW 2022(COMES McCLOSKEY C4 CONE CRUSHER CONE, VOLVO ENGINE) WITH CABLES AND (400HP CONTROL PANELS)

USED 2013 CLEMRO 6X20 TRIPLE DECK HORIZONTAL SCREENER (2 CROSSBELTS)

In House Financing now available! Flexible terms and conditions. Call Tyalta Finance today at 1-877-550-0016, finance@tyalta.com

www.tyalta.com · info@tyalta.com

.com FAMILY OWNED, SINCE 1971

SECTION 3

SIX LOCATIONS TO SERVE YOU!

.com AUGUST 2022 · PAGE 41 CONTACTS

Victoria: 888-652-9139

Ed Murray: 250-812-2925 Rob Nessel: 250-710-3626 Justin Jolicoeur: 250-668-7172 Garry Shelton: 250-715-5088 Craig Willett: 250-287-6169 Emily Polack: 250-480-8281 Ted Peterson: 604-240-6181

Duncan: 866-746-1515 Nanaimo: 250-756-0026

WE ARE HERE TO SUPPORT YOU! · All our locations are open providing safe places to get your truck serviced · We will get the right parts delivered to your location.

Campbell River: 250-286-1151 Langford: 250-915-0350 Burnside (Parts): 250-384-0451

2 OF EACH IN STOCK

55 TON LOWBED. Trailking double drop hydraulic lowbed. 25’9” deck space. 8.5’ deck width + 12” swingouts. Adjustable ride height and rear lift axle.

DOEPKER 53’ HI-BOYS & DROP DECKS. Steel drop decks with or without beavertails, aluminum wheels, tarp boxes, and pipe bunks. Steel Hi-boys in stock! CALL FOR SPECS & PRICING.

2022 TRAIL KING TAPERED 52 TON LOW BED, 9’ Wide with hydraulic neck with engine. Extended working deck - PERFECT PAVING/EQUIPMENT TRAILER! IN STOCK AND READY TO WORK.

ALL UNITS IN STOCK AND READY TO GO TO WORK!

DOEPKER SLIDING AXLE RECOVERY TRAILERS, 8'6" and 10' wide models in stock, 30,000 lb Warn winches, 3 function wireless remote controls, tool boxes, aluminum wheels. IN STOCK AND READY FOR DELIVERY.

TRAILKING TILT TRAILERS. Medium to heavy duty hauling w/ easy load tilt deck performance. Platform cushioning cylinders for slow descent. No hydraulics required. 40,000LB & 50,000LB CAPACITIES.

2022 TRAIL KING TK110SA, Tridem Sliding Axle Trailer, 55 ton, 9’ Wide, Canadian Specs, great recovery or equipment trailer. CALL TODAY FOR SPECIAL PRICING!

2009 KENWORTH T370. 52,000 GVW. 330HP Paccar PX8 engine. 10 speed manual trans. 688,000 KM, 12,000 lb front axle, 40,000 lb rear. CALL THE NEAREST DEALERSHIP FOR DETAILS!

USED POLE TRAILERS & RIGGING. 2 Peerless 2006 RT3000 pole trailers in stock. Profab rigging + Tri pole trailer available.

www.prtruckcentre.com

TRAILERS

Supply Post · supplypost.com

Hyundai Enters Articulated Dump Truck Market Hyundai Construction Equipment Americas today announced it is entering the articulated dump truck market with two new models – the HA30 and HA45 articulated dump trucks – targeting the popular 30- and 45-ton segments. The first of the new ADTs are now available for order through Hyundai’s North American network of authorized dealers. With rated payloads of 28 and 41 tons respectively, the HA30 and HA45 articulated dump trucks provide an ideal haul truck match for Hyundai’s larger crawler excavators and wheeled loaders. Designed primarily for high-volume earthmoving projects, highway construction, and mine and quarry operations, Hyundai’s articulated haulers provide maximum drive and traction in the worst site conditions, maintaining year-round productivity for the customer.

“Hyundai is excited to enter the ADT market to better serve our customers in aggregates and infrastructure construction,” said Mike Ross, Senior VP of CE Sales, Parts & Service, Hyundai Construction Equipment Americas. “Our new ADT models are the first collaborative results of the combined design, engineering, and manufacturing expertise of Hyundai Construction Equipment and Hyundai Doosan Infracore.” Hyundai Heavy Industries Group in 2021 purchased the Doosan business, which now operates – along with Hyundai Construction Equipment – as a separate division within Hyundai Genuine. While maintaining their respective management and dealer network structures, the two divisions plan further integration in R&D, design, engineering, procurement and manufacturing.

Articulated Hauling The new Hyundai HA30 and HA45 trucks are built around a fulltime six-wheel drive concept, with front and rear limited slip differentials and a longitudinal differential that can be manually locked, for maximum drive and traction on difficult terrain. The trucks have a compact chassis design, to aid maneuverability, with a sloping rear frame and a front-mounted differential integrated into the ZF transmission, allowing for a shorter front frame section. This results in the smallest turning radius in the vehicle class and outstanding stability. Selfleveling hydro-gas suspension on the front axle further supports a comfortable ride, delivering maximum tractability in tough ground conditions. The turning ring is mounted in front of the

August 2022 HCEA

Page 42

Hyundai Construction Equipment Americas enters the articulated dump truck market with two new models – the HA30 and HA45 articulated dump trucks – targeting the popular 30- and 45-ton segments.

chassis articulation point, resulting in an equal weight distribution to the front wheels in all driving situations, for increased stability and traction. Tandem reduction gearboxes on the two rear axles enable maximum oscillation of the rear ax-

les to maintain ground contact on rough terrain. The single central differential increases ground clearance beneath the truck. Oil-cooled wet disc brakes achieve an extended service lifetime of up to 15,000 hours. A hydraulically activated mechanical

parking brake holds the machine when stationary. The trucks are supplied with a gradient meter, with flip-over protection and a Body Over Center of Gravity function, to assist drivers when dumping and operating on rough Continued on page 43

Details: Hydraulic removable gooseneck (narrow neck), 110" swing clearance, 50" coupler height, 52'11" overall length c/w a 25'10" working deck, deck height adjustable to 5 settings, Apitong between outer rail and main rail, 2" Fir decking in outside section, suspension boom cover bolted c/w traction sand over axle 1, 2, and 3, FMVSS, CMVSS air system c/w suspension dump valve & pressure gauge in control box and more.

ID# 15550

2022 BRANDT C550 HRGN ST TRI AXLE MEMBER OF:

1806 2 Street, Nisku, AB, Canada T9E 0W8 brandt.ca/trailers 1-844-388-2770

RENTAL PURCHASE OPTIONS, FINANCING, AND TRADES AVAILABLE

August 2022 Continued from page 42

terrain. The HA30 has a 22 yd3 (16.8 m3) heaped body capacity, that rises to 23.3 yd3 (17.8 m3) when fitted with a tailgate. The larger HA45 offers a 32 yd3 (24.4 m3) heaped capacity, rising to 34 yd3 (26 m3) with a tailgate. Both dump bodies can be optionally heated by the engine exhaust gases to prevent freezing and sticking of materials when operating in colder temperatures. Internal wear plates are available as an

Supply Post · Our Readers Are Your Buyers option when working in through eight-speed ZF applications with heavy automatic transmissions. and hard rock. The torque converter has lock-up in all gears, reProven Powertrain ducing fuel consumption Tier 4 Final Scania die- and increasing efficiency. sel engines power both Ground level service points trucks. The HA30 uses a are designed for maximum five-cylinder, 9.3-liter DC9 efficiency and improved turbocharged diesel, pro- safety. The engine canopy ducing 375 hp (276 kW) tilts forward for access to and 1,876 Nm of torque. filters and fill points, while The larger HA45 uses a the complete cab structure six-cylinder, 12.7-liter can also be tilted towards DC13 diesel engine, pro- the rear of the truck, to ducing a maximum 500 provide access for repair hp (368 kW) and 2,476 and maintenance. Nm of torque. Hyundai’s Hi-Mate Both engines drive telematic monitoring sys-

COURTESY BC GOV PHOTOS

Permanent Repairs Begin Soon To BC’s Coquihalla And Highway 1

Permanent repairs to flood-damaged sections of the Coquihalla (Highway 5) and Highway 1 will soon be underway, protecting the safe movement of people and goods in British Columbia. “This marks a significant milestone in our recovery from the devastating atmospheric river events of last fall,” said Rob Fleming, Minister of Transportation and Infrastructure. “Following the extraordinary work that was done to reconnect these highways in December, we’re building back permanent infrastructure that will be equipped to better withstand the impacts of climate change and future extreme weather events. I want to extend my sincere thanks and appreciation to all those who have worked together to help us recover from the unprecedented floods, including the local First Nation communities that continue to work closely with us as we move into this next phase of recovery.”

The contract for development and early construction work on sections of the Coquihalla between Hope and Merritt has been awarded to KEA5, a joint venture between Peter Kiewit & Sons and Emil Anderson Construction. The work to return the Coquihalla to the previous full, four-lane capacity will begin this summer and take place at three sites: • Bottletop Bridges, 50 kilometres south of Merritt; • Juliet Bridges, three kilometres south of Bottletop; and • Jessica Bridges, 48 kilometres south of Juliet. Work is expected to be substantially complete this winter. All efforts will be made to minimize traffic disruptions during peak travel hours, and crews will work overnight when possible. The project will be completed through a collaborative construction model where the owner and contractor work to-

gether to complete the design and construction of the project, including sharing risks and incentives. The ministry has also issued a request for proposals (RFP) for damaged sections along Highway 1 through the Fraser Canyon. The RFP process invites select contractors who qualified through the Highway Reinstatement Program request for qualifications (RFQ) process to take part in the competitive selection process to design and construct the permanent repairs needed at: • Falls Creek Bridge, 55 kilometres south of Spences Bridge; • Tank Hill Crossing, 23 kilometres south of Spences Bridge; and • Nicomen River Bridge, 19 kilometres south of Spences Bridge. The RFP for the repair project will close Sept. 14, 2022, with the contract awarded shortly after. The ministry is also continuing to make good progress on restoring ac-

tem is standard, with satellite and GSM connectivity, to reach the most inaccessible construction and mining sites across the world. This enables remote monitoring of productivity, fuel consumption, system warning and maintenance status, reducing unplanned downtime and improving fleet utilization. Comfort and Protection With the most spacious ROPS/FOPS cab on the market, the Hyundai ADT features an ergonomic layout to the controls, a cess throughout the Highway 8 corridor. The storms completely washed out 25 sections of this highway, leading to the closure of the highway between Merritt and Spences Bridge. Since then, the ministry has completed temporary repairs at 18 locations and construction has started on another two. Work is being planned for the near future at the five remaining sites to complete temporary repairs along this route. Traffic delays are expected throughout construction on all highway reinstatement projects, including periods of single-lane alternating traffic and short, intermittent full closures. Advanced notice of any traffic disruptions will be provided. Updates will be available online at DriveBC.ca and on Twitter at @DriveBC. Quick Facts: • Highway 5 was closed to regular vehicle traffic on Nov. 14, 2021, due to damage caused by an atmospheric river. • Flooding and washouts associated with the November 2021 rain damaged more than 20 sites along 130 kilometres of the Coquihalla Highway between Hope and Merritt. • This included seven bridges where spans completely collapsed or were heavily damaged. • More than 300 workers using 200 pieces of equipment moved more than 400,000 cubic metres of gravel, rock and other material to repair and reopen Highway 5 to commercial vehicle traffic in 35 days, on Dec. 20, 2021, and to all traffic on Jan. 19, 2022. b Source: Gov.bc.ca

Page 43 high-quality air-suspended operator’s seat, an internal sound level of just 72dB(A), MP3 and Bluetooth-compatible radio, USB charger, all-round safety rails, and a footrest. Interior cab storage includes room for an optional cool/hot box and 12V power sockets for operator phones and other accessories. Full cab climate control is standard on both models for maximum comfort throughout the working day. A comprehensive monitor panel provides an integrated payload meter to

prevent overloading and to record productivity. Diagnostic functions are included within the monitoring system, and the operator can remotely check hydraulic and transmission oil levels from the cab. A gradient meter ensures that the truck is driven safely within its limits, while an integrated rearview camera and large mirrors provide excellent all-round visibility when reversing under an excavator or into the dumping area. b Source: Hyundai

Proud member of:

BCTA, AMTA, STA, MTA

1-833-903-3404 702 McCool St., Crossﬁeld, AB

BRAND NEW TK80MG TRIAXLE DOUBLE DROP EQUIPMENT TRAILERS

è ALUMINUM PULLOUTS, CROSSMEMBERS, AND FRONT/REAR DECKING

è 28’6” WELL è MECHANICAL RGN

ON ORDER NOW

TK110SA TRIDEM SLIDING AXLE RECOVERY TRAILER

è FAST OPERATING è REMOTE CONTROL TRAILER SALES & RENTALS • Heavy Haul • Dry Vans • Step Decks • Flat Decks • Custom Industrial

è LOW LOAD ANGLE è 30K WINCH

FULL-SERVICE REPAIR SHOP • 4 Service Bays • CVIP/AMVIC Certiﬁed

IN-HOUSE FINANCING AVAILABLE • Competitive Rates • Commercial F&I Specialists

Our Partners

www.competitiontrailersales.com

TRUCK PHOTO ADS Book your ad online at: supplypost.com/advertise/classifieds or call 1-800-663-4802 today! PAGE 44 · AUGUST 2022

WWW.SUPPLYPOST.COM

TRUCKING BUSINESS OPPORTUNITY

2021 3500 PROMASTER CARGO VAN

Trucking Business opportunity - Owner Retiring, Canada Cranes Ltd. Great name! 2 Freightliner trucks, complete with tools to maintain and many spare parts, Training and support available, Turn key.

CALL TED

304 KM, 3500 High Roof 136” Wheelbase, 3.6 Litre V6, 6 spd automatic, 5” touchscreen w/ Navigation, Back Up Camera, 220 amp alternator, heated mirrors, $69,888 + $798 Admin Services + Taxes, Stk# TR8870, DL# 30541.

NORTHLAND CHRYSLER DODGE JEEP RAM

canadacranes@gmail.com · (604) 290-5150

Call Murray 1-888-457-6908 www.northlanddodge.ca

2004 DOEPKER HB6505 42’ OILFIELD PICKER FLOAT

2004 DOEPKER HB6505 42’ OILFIELD PICKER FLOAT, 42’ OAL, 8’6” Wide, Swing Out Lights, Rear Live Roll, Sliding Suspension, 2023 Certification. POR.

COMPETITION TRAILER SALES matt@competitiontrailersales.com Phone: 1-833-903-3403

2008 FORD F-550

Crew cab service truck with 70cfm under hood v-Mac compressor and 3203 electric over hydraulic auto crane. Lots of drawer packs and 12v/24v booster pack in cabinet under crane. New Ford remanufactured 6.4L engine installed 2 years ago. Runs great. Upgrading to a new service truck so time to part with this one. 250,000 kms. $35,000. Located in Terrace, BC.

A.L.E INDUSTRIES

PHONE: (250) 631-9222

Canada Steamship Lines’ new diesel-electric self-unloading vessel, MV Nukumi, successfully completed its inaugural loading and discharge of deicing salt for dedicated customer, Windsor Salt. “The successful launch of Nukumi’s operations is the culmination of many years of planning with our visionary partner, Windsor Salt, to achieve the next level of safe, sustainable and efficient shipping in the Gulf of St. Lawrence and Great Lakes region,” said Louis Martel, President and CEO, The CSL Group. “We are extremely proud of our vessel’s early performance, which is a testament to the expertise, ingenuity and skill of our design and newbuild teams who conceived Nukumi, and of our seafarers who are now operating this highly sophisticated ship.” Purpose-designed to service Windsor Salt’s deicing salt shipping and

handling needs in Eastern Canada, the vessel’s stateof-the-art technology and innovative features were put to the test for the first time during loading at the Mines Seleines salt mine in the Magdalene Islands, and during the discharge in Montreal. On her first trip to the Mines Seleine salt mine, the ship’s modern hull design and twin-fin dieselelectric propulsion system demonstrated the vessel’s

ONLINE Watch the video at

SUPPLYPOST.COM/NEWS ability to transit through narrow channels more quickly, at lower tide and with exceptional maneuverability. The ship’s fully au-

tomated single point of loading and state-of-theart cargo handling systems performed as designed and eliminated the need for vessel shifting during loading, making for a safer and more efficient operation. During discharge in Montreal, the vessel’s shuttle discharge boom arrangement significantly reduced shifting, while sensor technology installed on the boom and programmed to auto-pile mode contributed to saving time and crew effort. Several innovations built into the design of MV Nukumi are also reducing the ship’s overall environmental footprint and are expected to reduce greenhouse gas emissions and air pollutants by 25% and 80% respectively, compared with previous ships servicing the same routes. These include diesel-electric tier 3 engines, a ballast water treatment system, a waste heat recovery system, and

CSL’s new purpose-designed diesel-electric self-unloading ship begins service for Windsor Salt. Windsor Salt Ltd. is headquartered in Pointe-Claire (Quebec) and employs approximately 775 people across Canada. overall quieter machinery. “Canadians count on the critical deicing salts that Nukumi will deliver to stockpiles throughout Eastern Canada to help keep roadways safe during the winter,” said Luc B. Savoie, Vice-President and Chief Commercial Officer, Windsor Salt Ltd. “Reducing the environmental impact of shipping our deicing salt and ensuring everyone’s safety are important objectives at Windsor Salt, and we

are delighted that this new, advanced ship will help us achieve both.” CSL is grateful to the Ministère des Transports du Québec for its financial contribution as part of the Ministry’s program to improve the efficiency of marine, air and rail transportation. “With Avantage SaintLaurent, our government has given Quebec a clear vision for the marine industry: aligning economic development and

CNW GROUP/THE CSL GROUP INC.

CSL’s New Purpose-Designed Diesel-Electric SelfUnloading Ship Begins Service For Windsor Salt

protecting ecosystems. CSL’s Nukumi is a perfect example as to what we want to do on the St. Lawrence. I am very proud to support this project, which uses innovative marine transportation practices that respect the environment, and has concrete benefits for communities,” said Chantal Rouleau, Quebec’s Minister for Transport. b Source: CSL Group Inc.

August 2022

Supply Post · Our Readers Are Your Buyers

Page 45

ONTARIO | MARITIMES | QUEBEC

1-855-646-6993

Your Transport Trailer Superstore

SALES, PARTS & SERVICE

YOU CAN STOP LOOKING, WE HAVE IT! IN STOCK!

NEW XL SPECIALIZED 48’ & 53’ 40 TON MECHANICAL FLOATS WITH FLIPS/50 AND 51 TON HYDRAULIC FLOATS.

IN STOCK!

JC 55 TON HYDRAULIC DETACHABLE FLOATS

IN STOCK!

NEW ARNE’S TRI-AXLE STEEL PONY PUP

NEW GINCOR, ALL AXLE CONFIGURATION AVAILABLE.

IN STOCK!

NEW BERG’S B-TRAIN DUMPS,

IN STOCK!

NEW MAC TRIDEM & TRI-AXLE ALUMINUM END DUMPS

IN STOCK!

NEW THRUWAY FULL GALVANIZED FLATBEDS & DROP DECKS.

IN STOCK!

2022 ITD CHASSIS, FULLY GALVANIZED All conﬁgurations available.

View All Our New & Used Inventory at TRANSEASTTRAILERS.COM

Page 46

Supply Post · supplypost.com

How To Choose A Dump Trailer

End dump trailer mechanism

The Pros & Cons Of The Top Four Types of Commercial Dump Trailers Article & Illustrations by Maxim Truck & Trailer

f you’re trying to determine which type of dump trailer is right for your business, you’ll need to consider the pros and cons of the four main types of dump trailers. Side dumps, end dumps, belly dumps and live floor trailers all have a similar purpose – to move aggregates or bulk material from one job site to another. All of these trailers are unique in their design and they all unload their cargo differently which represents their unique differentiation. What you’re hauling, weight restrictions and landscape or terrain will help you determine the right dump trailer for your business. This article will take a look at these four most popular types of commercial dump trailers on the market. Companies and industries across Canada and the US use a combination of these trailers to take care of nearly all their commercial dump trailer needs. Which dump trailer is right for your business? Which brand should you buy? Well, let’s look into it. End Dump Trailers End dump trailers have been the most common dump trailers for many years. End dump trailers are named after their loading method. The front of the box is pushed up into the air via hydraulics allowing the materials to fall out of the back gate. Most commercial end dumps range in length from 26 to 40 ft and is commonly tandem or tridem axle configurations. End dumps are com-

Your Truck & Trailer Connection, Since 1971

monly used in construction (specifically road and building construction), as well as in the agriculture industry and aggregate stockpiling fields.

The best features of side dump trailers • Side dumps are typically very stable when dumping. • Side dumps have very fast unloading cycles – as quick as 10 seconds to dump the load which makes them ideal in environments where unloading times are critical. • Side dumps can handle large boulders and other bulky materials that aren’t suited for the other dump trailers • They’re typically very easy to use. • You can dump on uneven ground. • The tub of a side dump is watertight so semi-liquid material doesn’t leak when hauling • Side dumps can be dumped while the trailer is moving.

The best features of end dump trailers • They typically have higher sides than other dump trailers, allowing them to stock higher and heavier loads. • End dumps are very durable and incredibly versatile. • Good for unloading in tight spots. • End dumps offer rapid unloading. • They can handle many different types of materials including larger rocks, demolition debris and even semi-liquid material that can be accommodated via a leakproof tailgate. The downsides of side dump trailers The downsides of end • Due to their tub builds, dump trailers they typically carry less • They are generally the cargo than the other two least stable trailers when types of dump trailers – unloading. although side dumps do • They are harder to macome in Super B configuneuver and usually need rations to compensate. someone quite skilled at • Some dump sites are not moving trailers to operconfigured well for side ate them efficiently. dumping. • It becomes difficult to • It can be hard to maunload them when not neuver them in confined on stable or level ground. spaces. • They require a specially sealed back tailgate to Belly Dump Trailers effectively haul semi-liqUnlike other dump trailuid material that doesn’t ers, belly dump trailers (also spill out the back of the known as bottom dump trailer. trailers and cross gate trailers) have gates at the bottom Side Dump Trailers of the trailer that open up Side dumps are named like a clam shell. While drivafter their unloading ca- ing at a variety of speeds, pabilities. Using hydraulic these trailers allow the materams, side dumps unload rial to drop through the botthe cargo off the right or tom gates in a windrow – a left side of the trailer and long line of material versus can do so without requir- a pile. These trailers are ideing the air ride suspension ally suited to road mainteto be deflated beforehand. nance that required gravel or Side dumps are heavily asphalt to be spread evenly used in the construction across large areas. and waste disposal indusBelly dumps are comtries and are used when monly used in stockpiling building roads, pit mining, and material transport, but excavating, transporting they’re particularly good semi-liquids, performing at gravelling roads. These stockpile dumps and mov- trailers are ideally suited to ing fine materials. road maintenance. Continued on page 47

Side dump trailer mechanism

Belly dump trailer mechanism

Live bottom trailer mechanism

August 2022

August 2022 Continued from page 46

The best features of belly dump trailers • Their unique design helps minimize the total weight, allowing you to load more materials inside. • They’re very stable since they don’t need to be raised for dumping. • Unloading allow for windrowing. The downsides of belly dump trailers • There are limitations to dumping since there needs to be enough room below the trailer to properly dump their load. • They’re not suited for hauling large materials since large material would get stuck in the clamshell gates. • Liquid or really fine material can leak out the bottom, making belly dumps unsuitable to

Supply Post · Our Readers Are Your Buyers haul such things. • These trailers are designed more for spreading vs dumping. • Live Bottom Trailers Live bottom and belt floor trailers are among the newest of dump trailers on the market. Their unique belt floor allows the material to be dumped out the back of the trailer more precisely that other dump trailers. They generally lead to safer dumps, reduced chance of rollover, and are gentle on your payload. You’ll find Live Bottom trailers in use in a variety of industries including road construction, aggregate hauling and agriculture.

AMTA

• •

The downsides of live bottom trailers • Unload times can be longer than other trailers • Live floor trailers are more costly than traditional dump trailers The best features of live • Maintenance of belt, bottom trailers chains etc can be more • Virtually zero risk of involved than traditionrolling or tipping over al dump trailers without • Precise unloading with these moving parts. b

AMTA Hosts 28th Annual Alberta Inspectors Championship

The 28th annual Alberta Inspectors Championship was held at the Alberta Motor Transport Associations training centre at the Edmonton International Airport on Saturday June 25th. There were five CVSA North American Standard (NAS) inspectors competing for top prize in the competition. • Sheriff Mohsen Eftekhari – High River • Sgt. Travis House – Atmore Vehicle Inspection Station (VIS) • Sheriff Tyler Lamb – Atmore VIS • Sheriff Alexander Ludwig – Atmore VIS • Sgt. Darren Thompson – High River The Alberta Inspectors Championship is an opportunity for top CVSA NAS inspectors to compete against each other in various commercial motor vehicle inspection events. The competition starts with a written exam

•

the belt drive - you can unload as much or as little as needed on a job site. Because they don’t tip to unload, live bottom trailers can unload indoors Very safe as trailer does not lift into the air and can’t get caught on overhead wires,etc. Low center of gravity, so loads don’t shift when going around corners. Promotes an evenly distributed load.

where the inspectors are tested on their knowledge of Dangerous Goods, CVSA inspection procedure, policy and their ability to apply the CVSA North American Out-ofService criteria. Inspectors that obtain the highest scores on the exam continue on to the second phase of the competition. The second phase of the competition includes a personal interview where inspectors are asked a series of CVSA related questions from a panel of judges. The contestants are judged on their communication skills, knowledge, professionalism, judgement and analytics. This is a timed event where the inspectors are under the gun to come up with a quick well thought out response. Once the personal interview is complete the contestants go on to the practical inspections where they are judged on inspection procedure and their ability to correctly identify violations. There are four inspection events: • -Level I CVSA NAS Inspection (truck tractor – semitrailer) • -Motorcoach • -Dangerous Goods Highway Tank • -Dangerous Goods small means of containment.

Once the practical inspections are completed the scores from all events including the written exam are tallied, and the inspector with the highest score is crowned grand champion. The following is the result of the 2022 Alberta Inspectors Championship: • High Point Vehicle Inspection – Sgt. Darren Thompson • High Point Motorcoach Inspection – Sgt. Travis House • High Point Driver Inspection – Sgt. Thompson

Page 47

Parts Shortages Continues To Curtail Truck Production: ACT

down since February. The gases that were purified in Ukraine were generated by Russian steel manufacturers. A scramble to re-source is on and inventories are limited.” However, ACT says demand for new trucks remains high. “Carrier profitability is robust, we expect any recession to be shallow and short-lived at this point, and our Class 8 models are indicating pent-up demand, as well as pre-buying potential in advance of CARB’s costly Clean Truck mandate.” Truck manufacturers have been unable to keep up with customer demand due to a shortage of microchips and other vital components. They have reduced order intake to manage customer expectations and backlogs. b

The analysts at ACT Research are losing confidence that lingering supply chain issues will subside enough to enable manufacturers to ramp up commercial truck production anytime soon. In its Commercial Vehicle Dealer Digest, ACT reports OEMs may not be able to fully meet customer demand this, or even next, year, reports Truck News. “Recent commentary from leaders in the semiconductor industry point to a more cautious outlook for longer. ASML, a key supplier of semiconductor production equipment, recently called out

a ‘significant shortage of semiconductor manufacturing capacity this year and next,’” said Kenny Vieth, ACT’s president and senior analyst in a related release. “In light of this and other industry commentary, we believe lower-for-longer chip availability is likely to restrain the industry’s ability to meet otherwise strong customer demand.” Vieth said other downside risks remain as well. “Moreover, about half of the global supply of neon, critical for chipmaking, is concentrated in Odessa, Ukraine, where production has been Source: OTA

• Runner Up – Sgt. Travis House • Grand Champion – Sgt. Darren Thompson In addition to awards being presented for inspection superiority, there is also an Award of Excellence. The Award of Excellence if voted on by all contestants and judges and is presented to the contestant who best exemplifies the spirit of co-operation, leadership, professional image, positive attitude and organizational ability. This year the Award of Excellence

was presented to Sgt. Darren Thompson. The grand champion of the Alberta Inspectors Championship may have the opportunity to represent Alberta and the Sheriff Highway Patrol at the North American Inspectors Championship (NAIC) in Indianapolis, Indiana in August. NAIC is a competition where the top inspectors from each jurisdiction in North America gather to compete against one another and receive training on the latest commercial mo-

Proud member of:

BCTA, AMTA, STA, MTA

tor vehicle safety technologies and techniques. Congratulations to all AIC competitors. It takes a lot of confidence to enter a competition where you are submitted to tight timelines, difficult inspection scenarios and peers judging you at each event. My hat goes off to each and every contestant that took part in the competition this year. b Source: AMTA & CVSA Programs Coordinator, Sheriff Highway Patrol, Sgt. Brian Davyduke

1-833-903-3404 702 McCool St., Crossﬁeld, AB

TRAILER SALES & RENTALS • Heavy Haul • Dry Vans • Step Decks • Flat Decks • Custom Industrial

FULL-SERVICE REPAIR SHOP • 4 Service Bays • CVIP/AMVIC Certiﬁed

IN-HOUSE FINANCING AVAILABLE • Competitive Rates • Commercial F&I Specialists

Our Partners

www.competitiontrailersales.com

Page 48

Supply Post · supplypost.com

August 2022

SALES • RENTALS • PARTS • SERVICE & REPAIRS • FINANCE & LEASING

1-855-998-0716 Call 1-855-998-0716

2023 FORD SUPER DUTY F-750 w/ ADVANCE ALUMINUM TANK, 11,700 Litre Capacity TC406, 2 Compartment, 6.7L Diesel V8 w/ 270HP, Fully Customizable Tank Rigging Available! STK #14794......$POR

2022 Trail King Side Dump, 31 Cu.Yd Capacity, 5” Hydraulic Cylinders, Wire Remote Tube Control, Electric Tarp, STK #14199 .......................................... $POR

2023 Doepker Sliding Tilt, Wet Kit Ready, Live Rolls & Hydraulic Lift Rolls, Ramsey 30,000 lbs Winch, STK #14369..................................................... $191,375

2022 Doepker Tridem Logger, Available for Rent or Purchase! 6 HD Bunks, Lift Molly at Rear, Arctic Grade Air System, TARE: 22,594lbs., Call for Availability! STK #13819 .................................................... $112,995

2020 Doepker 24 Wheel 75-Ton Float, Live Roll & 4 Support Rollers, Full Width Pick Up Throat, Oil Field Rear Bumper for Tandem Booster, TARE Weight 34,000 lbs, STK #12798 .............................................$210,995

2017 Midland Clam Dump, Includes NEW CVIP, Stainless Steel Checker plate Fenders, Steel Rims, GVWR 50,000 kgs., STK #14051 ..................... $POR

2023 Doepker Super B Grain, 2,990 Cu.Ft. Capacity, Lift Axles, Tire Inflation, LED Load Light Package, STK #14236 ................................................... $160,067

2022 Doepker 50-Ton 10’ Wide Scissorneck Tridem, TARE 28,750 lbs. GVWR 125,000 lbs. Flip Up Live Roll & Beavertail, Kicker Rolls, ETA JAN 2022, STK #13997 ..................................................................... $173,620

2022 Lazer Inox S/S 44 Cube, 2 Compartments, Double Conical, Belly Mounted Cabinet, Will Come Equipped w/ T&E pump, Titan Gauges & Readouts, STK #14171 ............................................. $269,995

2022 N&N Tandem Inno Dump, 8,030 lb Load Capacity, Galvanized, Telescopic 3-Stage Cylinder, LED lights, STK #14279 ................................ $15,995

RENT FROM US!

FOR FULL INVENTORY VISIT

WWW.EDMONTONTRAILER.COM

CLASSIFIEDS

TO PLACE AN AD, CALL 1-800-663-4802 OR VISIT WWW.SUPPLYPOST.COM /ADVERTISE/CLASSIFIEDS ATTACHMENTS

2016 V-Series V70E Low Hour Breaker Hammer with Original Point, Brand New Spare & Chisel Paste. Lugging to Fit John Deere 50 or 60 & Hitachi 50 or 60. One owner operator. Excellent Condition. Retirement Sale. $7,000. Victoria, BC. Maverick Excavating Ltd. PHONE: (250) 380-8451

40” Weldco Beales Dig bucket. Very good shape, new teeth, Heal shrouds armoring & hardfacing 20 3/4’’ inside lugging. $5200. Nakusp, BC.

BUSINESS OPP. Two lots zoned Service Commercial. 2.87 acres available downtown Williams Lake, 3 buildings. For more information, please call. PHONE: (250) 392-0098 Wo r k i n g B u s i n e s s i n C e n t r a l Ko o te n ays . 3 Sources - Sand Gravel & R o c k . Tr u c k i n g & Excavating. Complete line of Equipment. KEVIN: (250) 428-6043 OR (250) 428-9483 Please leave a message

CRUSHERS (Jaw)

Gravel Pit Leasing Opportunity with Large Re s i d e n c e Ava i l a bl e ! Wilde Road Sand & Gravel is looking for a successor for their current gravel pit operator, who is in the process of retiring. Located on over 37 acres of freehold property in the qathet Regional District (qRD), north of Powell River, BC along the Sunshine Coast. Operations active for over 50 years, with a mine permit in good standing. Additional grounds outside pit boundary are available for related or independent business opportunities. No zoning restrictions on property or in the broader qRD. Option to purchase existing gravel extraction & p ro c e s s i n g e q u i p m e n t & machinery, providing a turn-key gravel pit operation. A truck scale attached to a fully serviced office space is also available on property. Multi-bed & bath residence with partiallyserviced workshop is adjacent to the pit. Suitable for a large family. Option to purchase gravel pit and/or property itself also available. E C OT E R R A D E V E LO P ERS@GMAIL.COM PHONE: (604) 483-1487

Trucking Business opportunity - Owner Retiring, Canada Cranes Ltd. Great name! 2 Freightliner trucks, complete with tools to maintain and many spare parts, Training and support available, Turn key. canadacranes@gmail. com TED: (604) 290-5150

AUGUST 2022 · PAGE 49

DOZERS

ENGINES

For Sale: McCloskey J45 45 x 27 Jaw Crusher. $550,000 CDN. Langley, BC. Norstone Excavating. gerrardbwhite@gmail.com PHONE: (604) 866-0482

CRUSHERS (Port.)

CONVEYORS

2019 John Deere 1050K. Cab w/ AC; 28” Pads; U Blade; Ripper. 6,236 Hours. Located in Regina, SK. Brandt Tractor PHONE: 888-2BRANDT Cat reman. 3126 diesel engine. 1683 hrs on reman. Complete. Factor y Cat overhaul. $11,500. Melfort, SK. Keith’s Hauling Inc. PHONE: (306) 921-7721

New & used conveyors, from 20’ to 120’, radial or transfer conveyors, quick Mormak 16-45 Crushing delivery. Spread w/ 25/40 Jaw. Tyalta Industries Inc. 2019 John Deere 850L PHONE: 1-800-960-9939 48’ power van w/ 425kva LGP dozer. Like new! CRUSHING EQUIP. C u m m i n s G e n s e t & Comes with Topcon grade tower; feeder; 16x5 triple control GPS. Machine Various crushing equipdeck screen; 200 hp RC only has 2200 hours. S/N: ment & par ts for sale. 1T0850LXKKF362244. Located in the Edmonton II; 25x40 universal jaw w/ $ 4 7 5 , 0 0 0 . L o c a te d i n Area. Call Mike for more feeder; and 28’ trailer w/ Langley, BC. information. additional switch gear & High Road Excavating MIKE: (780) 220-7770 storage. Conveyors, load- Ltd. keith@highroadexltd.com ers & potential work availCRUSHERS PHONE: (604) 838-0339 able. Armstrong, BC. For all your crushing 2 01 3 J D 8 5 0 J W LT equipment requirements. SCV Contractors Dozer, PAT Blade, Ripper, Sales, service and parts Corporation Rebuilt Motor. 10,438 hrs. MORMAK EQUIPMENT carson@scvcontractors. $129,000. PHONE: (250) 542-7350 VERNON, B.C. PHONE: (250) 457-0099 ca

CRUSHERS (Cone)

PHONE: (250) 545-8883

Large inventory of used and rebuilt Detroit Diesel, Cat, Cummins, Perkins, Deutz and Volvo engines. P.G. Truck & Equipment phone: 1-800-946-9400 OR (250) 561-1234 ENGINE FOR SALE - 2018 Detroit DDE DD16-565 HP. GHG17. 3506 hrs. Call Henry for more info & pricing. Houston, BC. hfennema.nts@gmail.com HENRY: (250) 845-1022

EXCAVATORS

EMPLOYMENT

DISMANTLED Wrecking CAT 966C for parts. Merlin.gise@shaw.ca MERLIN: (250) 819-4444

2017 Hitachi ZX135USK-6 w/ new dig bucket, new Two 4¼’ std Symons cones Equipment For Sale Online for sale. $40,000 OBO Wrecking Cat 938G forklift. FROST/ROCK ISSUES??? clean up bucket, new manual wedge Q/C, new – We have thousands of each cone. Both run good Call Doug for parts & more FOR HIRE: XR32 Xcentric equipment & trucks for sale but one needs new brass. R i p p e r o n Vo lvo 2 5 0 hydraulic thumb, 3 caminformation. at SupplyPost.com! Log on One is auto adjust. Excavator. Looking for era system. 3761 hrs. batemanlogging@shaw.ca work. $158,000. today... steve@agg-tech.com PHONE: (250) 468-1000 STEVE: (604) 857-3107 DOUG: (250) 862-7430 DOUG: (250) 862-7430 www.supplypost.com

ZF TRANSMISSIONS & DIFFERENTIALS

- REBUILDS & REPAIRS Moxy, Terex, Volvo, John Deere, Case - specializing in off-highway applications - quality and cost-effective work - on-site testing and troubleshooting - available 7 days a week

Also offering on-site repairs and servicing of all makes of construction and agriculture equipment.

Dolphin Mechanical Services Ltd. Langley, BC - Call Eric 604-314-8032 dolphinmechanicalservices@telus.net

WWW.ALBERTAENGINE.COM 64166-426 Ave E Aldersyde, AB T0L 0A0

ENGINE PARTS ENGINES • CALL MARK 403-519-7254 JOHN DEERE • 6090 JD RB �� $19,500

CAT • C13 Power Unit �� $16,000 • 3126 ��$2,500 - $4,900

CUMMINS • 6CTA8�3 RB LB��$10,500 • 4BTA3�9 RB ��$8,900 • N14 C+ ��$9,000 • ISL CM554 �� $5,500 • ISL 2017 �� $14,500

IHC • DT466E 2000��$3,500 • DT466 2007��$6,500 DETROIT • DD15 engine �� $8,500 • 4-53 ��$5,000 • 3-53 Used ��$3,000 • 4-71 Rebuilt��$6,900 • 6-71 Rebuilt��$7,500 • 6V53N Rebuilt ��$7,500

1-800-361-7333

Ph: 403-720-3494 mark@albertaengine.com

Bob’s Diesel Repairs Winfield, BC

Phone: 250-766-3833 Diesel Generator Sets - 30 kW to 150 kW Units

• Cat 3306 D.I. Running Engine, Complete with Rad • 200 kW Generator End - Rebuilt • 30 kW Kubota 120-240 30kW Gen set • Rebuilt Cummins 8.3 Engine, 270 Hp LDEngine, 230 Hp • Rebuilt CumminsSO 8.3 • Perkins 1006 Engine D Lead SOL12 • Cummins 175 kW, • JD 150 kW, 12 Lead Gen Set Cummins, Cat, Detroit Diesel Repairs

Page 50

Supply Post · supplypost.com

2021 John Deere 75G E xcavator, B rand new w/ new dig bucket, new w/ new dig bucket, new unit with only 500 hrs., Thumb & Aux Plumbing, clean up bucket, new manclean up bucket, new hyd. Clean up & Dig Buckets, ual wedge Q/C, new hyd. Steel Tracks, Blade, Lots thumb, new manual wedge of remaining warrant y. thumb. 4322 hrs. Taking $149,900. Q/C and hyd. blade. 4981 deposits for estimated Central Island Rentals + hrs. $146,500. January arrival. $154,000. Sales info@centralislandrenPHONE: (250) 468-1000 PHONE: (250) 468-1000 tals.com PHONE: 250-268-7123 2017 Hitachi ZX135US-6

2014 Hitachi ZX135US-5

LNH EQUIPMENT PARTS MACHINES Cat 322BL, parts machine ..........................POR Cat 980G Hi-lift, cab fire, wrecking for parts.....POR Cat 325BL, for parts ...................................POR Tigercat 870C Tool Cylinder ...................$3,500 Cat 330C Roadbuilder, call for used parts ..POR Cat 325D Forester, burnt, good U/C and other parts ...........................................................POR Volvo 210B wrecking ..................................POR Older Cat 120 Size Excavator, burnt, good U/C, hyd thumb and buckets ..............................POR

CAMPS 1998 Travco Industrial 22 Man Skid Mounted Camp, 11 Bedrooms, 22 Single Beds, 1 Private Bathroom w/ Shower, 3 Main Bathrooms w/ Showers, Urinals, 4 Sinks, 1 Lounge and Sit Area, 1 Kitchen, 1 Washer/Dryer Room, Mechanical Room .................................. POR 1997 Shanco 27 Person Skid Mounted Camp, Beds, Laundry, Sinks, Showers, Toilets, Kitchen, Dining Room ............................ POR

RUNNING MACHINES 2015 Doosan DL250-3 Wheel Loader, 7,500 Hours, 3.5 Yard Bucket, AC Cab ....... $69,500 2001 John Deere 450H Dozer, 10,000 Hours, Full Cab, Winch, Full Guarding, With Sweeps, Recent UC Work ............................... $47,500 1995 Tadano TR280XL 28 Ton 4X4 All Terrain Crane, 7,500 Hours, Mint ................. $47,500 2015 Hitachi ZX210 Forester, 10,000 Hours, 2000 Hours Drop In Engine, South Star Q5 500 Processing Head ........................... $160,000 2004 Cat 325 Excavator, Cab Riser, Cab Guard, Hydraulic Thumb, 2 Buckets, Recent pin and bushing working, Over 20,000 Hours ..... $59,500 2017 Kubota SSV75, 2 Speed, Quick Connect, Hand Pilot Controls, Full Cab Satellite Radio, Bluetooth, Brand New Tires and Bucket, 1500 Hours .............................................. $55,000 2006 Cat 320D Heel-Boom Log Loader, A/C, hyd. tilting cab, 27.5” double grouser track shoes, Hi & Wide U/C, Rotobec 7606 log grapple, catwalks ............................. $69,500

TF: (844) 849-4257

www.lnhequipmentltd.com

for complete inventory and pictures

August 2022

2015 John Deere 135G w/ 2015 John Deere 75G w/ Daequip dig bucket, clean Brandt clean up bucket, up bucket, Brandt hyd. Brandt dig bucket, Brandt thumb, hyd. blade, hyd. hyd. thumb, manual wedge Q/C, hyd. blade, 24” pads Q/C, long stick, and bolt on w/ bolt on rubber pads, rubber pad inserts. 6982 and long stick. 3585 hrs. hrs. $139,000. $115,000 Firm. PHONE: (250) 468-1000 VI Equipment Can’t find what you are PHONE: (250) 468-1000

looking for? Thousands of Equipment For Sale Online more machines and equip- – We have thousands of Equipment For Sale Online ment for sale on: equipment & trucks for sale – We have thousands of www.supplypost.com at SupplyPost.com! Log on equipment & trucks for sale today... at SupplyPost.com! Log on www.supplypost.com today... www.supplypost.com

2018 Hitachi ZX75US-5 w/

2013 Cat320D L. 13,303 hours. Dig & Clean up Bucket, Thumb & Aux Hydraulics, Positive Air Shut off, U/C at about 80% life left. Oil samples and service history available. Please contact for pricing. Champ’s Equipment Glenn@champsequip ment.com PHONE: 1-844-803-2566

2 01 8

new dig bucket, new clean

Hitachi

350LC

2015 Takeuchi 235 CRA Excavator. 5545 hours, well up bucket, new hyd. thumb, mini excavator. Good con- maintained and ready to new manual wedge Q/C, dition. 7400 hours. Thumb work! $290,000. Located in hyd. blade, option of rubber & 2 buckets. Professionally tracks or steel tracks. 1719 maintained. $47,000 OBO. Clinton, BC. monsos@xplornet.ca hrs. $129,000. Call or text.

2008 Hitachi ZX160LC-3 w/ CWS dig bucket, CWS clean up bucket, BMI hyd. thumb, hyd. wedge Q/C. 14,586 hrs. 98,000. PHONE: (250) 468-1000 PHONE: (250) 468-1000

LINK PARTS LTD SERVICE & EQUIPMENT

View all listings at linkpartsltd.com PARTING OUT - CALL FOR PRICING

1999 Tiger Cat 860 Feller Buncher • 2005 Hitachi ZX350 FM Log Loader 2000 Hitachi EX350LCH-5 Excavator • 1991 Aveling-Barford RXD28 Rock Truck PROCESSORS

2016 Tigercat 880 w/Waratah HTH 624C processor head. Machine is in mint condition, 8,400 hrs ..............................................................................$399,000 2002 John Deere 2554 Waratah 622 Warrior Head .................................$49,900 LOG LOADERS

2019 John Deere 3756G, 9,700 hrs, Tmar Heel and Grapple .................$275,000 2020 Hitachi 370 only 1,200 hrs, has 5,000 hr Warranty.......................$559,500 2013 John Deere 2954D 14,000 hrs, Tmar Heel & Grapple .................. $129,900 2014 John Deere 2954D 11,000 hrs, Tmar Heel & Grapple .................$149,900 1996 Hitachi EX400LC-3........................................................................ $29,900 2012 John Deere 3754D 11,000 Hrs $75,000 in Repars & new UC ......$219,900 2003 Kobelco SK370 Heel & Grapple ......................................................$34,900 2013 John Deere 3754D Tmar Heel & Grapple ....................................$149,900 EXCAVATORS

1995 Caterpillar 330L RB Excavator, hoe w/ Digging Bucket ...................$18,500 2007 John Deere 450DLC w/ 48" Digging, 84" Clean Up ........................$65,900 WHEEL LOADERS

1985 Caterpillar 988B Log Grapple .......................................................$38,900 GRAPPLE YARDERS

1975 Washington 78A............................................................................ $83,500 OFF HWY LOGGING TRUCKS

1980 Pacific P16 ................................................................................... $74,900 MISC TRUCKS

1979 Ford F600, Fire Truck ................................................................... $11,900 TUG BOATS

1956 S. Madill GM 671 ...........................................................................$34,900

Cell: 604-240-7977

WAYNE: (587) 971-4245

KEITH: (250) 457-7410

MOUNTAINSIDE EQUIPMENT Call Kelly at 1-855-950-1905

2017 555D Cat Skidder, 7,413 hours�� $240,000 2018 555D Cat Skidder, 3,798 hours�� $255,000 2017 Cat 545D Skidder, 6,427 hours�� $195,000 2013 Tigercat 880 Log Loader, 15,175 hours �� $255,000 2019 John Deere 948 LII Skidder, 3,328 hours �� $330,000 2005 Cat D7R XR Dozer, 9,890 hours�� $220,000 2018 Hitachi 310 Log Loader, 6,623 hours �� $435,000 2019 John Deere 2654G / 623 Waratah processor, 5,547 hours �� $405,000 2006 Komatsu D65Ex-15 Dozer, 9,900 hours �� $110,000 2008 Tigercat 870C Buncher, 13,282 hours �� $200,000 2017 John Deere 1910E Forwarder, 14,624 hours �� $210,000 2018 Tigercat H855D processor, 10,616 hours �� $399,900 2014 Hitachi 210/622B, 13,469 hours �� $139,000 2018 Komatsu PC138 Excavator, 2,340 hours�� $215,000 1999 Madill 2800 LL, 24,500 hours�� $160,000 2017 John Deere 872GP Grader, 8,668 hrs�� $282,000 2018 John Deere 1270G Harvester, 8,400 hrs �� $446,000 2013 John Deere 748H Skidder, 10,164 hrs �� $110,000 2016 John Deere 2454 Log loader, 8,900 hrs �� $250,000 2017 Cat 558 Log Loader, 6,200 hrs �� $399,000 2018 Eltec LL317L Log Loader, 5,290 hrs�� $345,000 2011 Cat D7E, 9,335 hrs �� $265,000 2002 Cat 325 Excavator, 7,887 hrs �� $105,000 2012 Hitachi 210/ 622B Processor, 16,721 hrs ��$110,000 2018 FB317L Eltec Buncher, 4,769 hrs �� $375,000

August 2022

Supply Post · Our Readers Are Your Buyers

Page 51

Wally’s Private Parts

FEEDERS

Quality Used Parts

Phone: (250) 833-8349

Evenings (250) 835-4678

Located in Sorrento, BC 2015 John Deere 350G. 1998 300 Hitachi. All New Rollers/Segments. Rails & Idlers 80%. Ext. Boom (13F pin to pin). Rebuilt Stick & Boom Cylinders. Rebuilt Rotary Manifold. 2 Rebuilt Bkts w/ New Pin. 32” Pads. 2 n d O w n e r. $ 6 0 , 0 0 0 . Contact Fred Scales. Gulfland Management Inc. fredscales@shaw.ca CELL: (604) 802-6741 PHONE: (604) 535-5825

WARATAH HEADS FOR PARTS

Owner operator machine,

Powerscreen HL75 Organic

great condition, topcon gps

Hopper-Feeder-Conveyor

equipped, recent idlers

56” reversible feeder with

RUNNING MACHINES FOR SALE

an auger to mulch your

• D8H Cat for sale .............................................................. $28,000

compost, a ribbed chev-

• 322C Cat Excavator, high wide forestry cab, dig bucket and thumb ............................................................................. $42,000

2016 Elrus 36” skid mounted feeder. Ready to work. yokes & pump drive. Good 4 to choose from. Starting undercarr iage, hydraufrom $60,000. lic coupler. 6410 hours. HUGH: (604) 657-7167 $218,000. Langley, BC. CQ Excavating PHONE: (604) 787-6825 Equipment For Sale Online

ron belt, and can reach a height of 30’.

• 1977 Western Star gravel truck, big cam, 400 Cummins motor, off road use only ............................................................. $10,000

Foreman Equipment

• 67H Ranger Skidder, running condition ............................ $27,000

info@foremanequipment.

• John Deere 2054 w/IMAC grapple .................................... $38,000

com

– We have thousands of

PHONE: 1-888-852-9021

equipment & trucks for sale FOR RENT: 2018 Olson at SupplyPost.com! Log on 15 Cubic Yard Skid Feeder. today... $8,000.00 Monthly Rental, www.supplypost.com based on a 28 day cycle plus applicable taxes. S/N: 18323. Arborg, MB. Glenko Enterprises (1994) Ltd. 36 x 36 portable single glenko@mymts.net axle belt feeder. 15 HP Now wrecking – JD350D PHONE: 1-204-376-2340 hydraulic power pack for LC Equipment For Sale Online vari-drive on feeder. 10 Langley Excavator Parts – We have thousands of HP discharge belt drive. Exchange Inc. equipment & trucks for sale parts@langleyexcavator. at SupplyPost.com! Log on 460 Volt – 3 phase. Asking $39,900. com today...

2014 Cater pillar 336EL H Hydraulic Excavator, Enclosed cab with Heat & A/C, Excellent condition inside and out with only 5900 hrs. (2190hrs. Idle time). H.D. 2 Grouser shoes with full rock guards. Tier 4 Engine with no DEF. $245,000 CAD. FOB Kelowna B.C. Contact Brad Pilling. TOLL FREE: 1-877-769-5835 PHONE: (250) 769-5835 PHONE: 1-888-530-5444 CELL: (250) 878-5823

WYATT’S USED EQUIPMENT

1984 Cat D8L Dozer, T/T Angle Blade & Ripper ........... $90,000 1975 Cat D6C, T/T Angle Blade & Winch ..................... $45,000 2005 Cat D5N XL, 6-Way Blade & Winch, 1,303 Hrs ..... .$129,900 1994 Cat D4H TSK, 6-Way Blade, Esco Swing Grapple...... $98,500 1998 John Deere 850C T/T Angle blade & Winch ........ $57,500 2012 Cat CS56, 84” Smooth Drum Packer .................. $90,000 1980 Champion 740 Grader, 671 Detroit Eng. 13’ MB . $17,500 2006 Hyundai HL760-7A Loader, 1,613 Hrs............... $168,500 1997 Cat 980G Log Loader, Paralift Grapple ................ $29,500 1995 Volvo L330C Log Loader, IMAC Grapple ............. $45,000 1996 Cat 950F Loader, Chip Bucket ............................. $30,000 1991 Wagner L4130 Log Stacker................................. $17,500 2012 Tigercat 635D Skidder, 1 owner, 16,603 hrs ..... $169,500 2005 Cat 535B Grapple Skidder, 12,557 hrs ................ $42,500 1997 Cat 525 Grapple Skidder, 16,725 hrs .................. $37,500 2012 Link-Belt 210X2 Processor, Waratah 616C ....... $125,000 1989 Cat EL 240 Stroke Delimber ................................ $18,500 2005 John Deere 903G Feller Buncher ......................... $45,000 1980 P&H CN128 Crane, Cummins Engine.................. $29,500 1976 Grove RT65S Crane, Detroit engine .................... $26,500 1978 Kenworth LW Dump Truck, 8V92T Eng., 15-Spd ....$21,500 Cat D8H UBlade, Complete w/ Push Arm ....................... $5,000 Cat D5M 6-Way Blade & C-Frame .................................. $6,750 Cat D9H 4BBL Single Shank Ripper .............................. $7,500 Cat D8K 2BBL Single Shank Ripper, c/w Valve & Control ... $4,750 Cat D5H Winch c/w Controls & Pump.......................... $10,500 Cat D7R Winch............................................................... $7,500 John Deere 4000 Winch ................................................. $3,800 Cat D8N Fuel Tank .......................................................... $1,250 CWS John Deere 744H Log Grapple .............................. $5,500 Tree Tow Dresser TD20E Grapple .................................. .$5,000 Madill 3800C Heel Rack & Cylinder.............................. $12,500 Full Set of 32’’ Pads For Link Belt 225LX ....................... $1,900 NEW Komatsu Idler, fits PC 400-6 or HD300-6 ............. $1,950 Knight 10’ Long Log Bunk & Bolster.............................. $3,250 Parting Out Cat D6C LGP, D7G, D7H LGP, D8N & 966C ... Call

Call 250-706-8594

www.supplypost.com

• 622B • 620 • 622 Warrior

DAWSON: (604) 657-0065

TRUE NORTH EQUIPMENT INC. 1-780-722-8129 www.truenorthequipment.ca

2003 Tigercat 870 Feller Buncher, Good Undercarriage, 9,600 Original Hours �� $115,000 New TimberPro 725D Processor/Southstar 500 In Stock �� $POR 2008 Deere 2054 / Waratah 622B Processor, Recent Reman Engine, Hydraulic Pump, Undercarriage, 35,995 hours, Ready to Work��$56,500 2013 Deere 748H Grapple Skidder, 7700x44x32 Floatation Tires, 1 Set of Chains, 17,493 Hrs��$71,500 2004 Komatsu PC270LC-7 Excavator, Cab Guard, Catwalks, HD Under guards, Rock Guards, Quick Coupler, Bucket, Hydraulic thumb, 25,701 Hrs ��$38,500 2001 Timberjack 660C Grapple Skidder, cab, 35�5 x 35 tires, 1 set of chains ��$35,000 2000 Timberjack 608S Warrior Harvester/Processor, Butt & Top Saw, Cummins, 12,500 hrs ��$63,500 2001 Komatsu 270LC-6LL Log Loader, Forestry Cab, Riser, Log Loader Front, Espar, Weldco Butt & Top Grapple �� $79,500 Weldco 250 Series 40” Excavating Bucket, 5 Teeth, Kat Lugging ��$2,995 2012 Hyundai 250/Southstar 585 Processor, 6750 hrs �� $220,000

• Skidder tire tracks to fit 30.5 x 32 tires ...................................Call • Clark 666C line skidder .................................................... $15,000 • Clark 666B line skidder .................................................... $15,000 • Hoe Pack for 160-200 exc.......................................................Call

PARTS MACHINES Skidders Tigercat 632E • John Deere 640D • John Deere 848H • John Deere 648D • Burnt 648 GIIIJD • John Deere 648GII Burnt • John Deere 748GII • International S7 • S10 International • 748GII • 2005 Cat 545 • 545 Cat, 748GIII, 748GII, 848 JD • 525 Cat • 630 Tigercat • 518 Cat • S8, S9 International • 380, 404, 450, 480, 550, 660 TJ

Excavators 2 40BLC Volvo • 220 Hitachi LC • 230 JD LC • 690E w/

Denarco - 3000 Stroker • 210 Volvo w/ 2000 Limmit • 240 Volvo • 210 Volvo Burnt • Case 1085 Rubber Tire • Cat 325L & 2200 Limmit Stroker • 160 Kobelco 2004 Burnt • 200 LC Hitachi • 2005 330 Link-Belt • 325 Cat • Link-Belt 2800 Quantum 3000 Dewarco • 210 300 Komatsu • 210, 200 Hyundai W/ Harricana Stroker • 330, 320, 325, 322, 225, 235 Cat • Hitachi 270 • Hitachi EX200LC • 220 Komatsu

Loaders

Log: JD 2054 Log Loader, • 330 Cat Log Loader with Thunderbird Log Loader • 644A JD • 125 Clarke Wheel Loader • Terex 8231

Rock Trucks Volvo A40C Rock Truck

Bunchers 2006 Tigercat 870 • 860 & 870 Tigercat • Madill 2200 • TJ 625 • Madill 2800 w/ 360 Head • 630A Prentice Tilter • 850 TJ • 950 TJ • Timberjack 950 • Madill 2200 Burnt • 2007 753 JD (Burnt) • 748GIII Burnt • 618 • 2628, 608, 618, 628 TJ • 630 Prentice

Crawler Tractors • D8H Cat, D7F Cat, Komatsu D65D

Graders

• 686 & 740 Champion • Austin Western Champion D600-760 Tractors • 630B Tigercat

Trucks • 1995 Freightliner, Series 60 Detroit, 470 Hp, 40,000 Lb 410 Ratio Rockwell Axles, Dbl Lockers

Other parts machines

• 320 Waratah Head • Coring Hotsaw 20-22 Head • OMEGA 20-20 Ton Hyd. Crane • Crane Ph 20-1A Omega • Denharco 3000-3500 Strokers

Used Tires and Chains

• 35.5 x 32, 30.5 x 32, 24.5 x 32, 23.1 x 26 • 73 x 4400 • 18.4 x 34, 26 x 28 • 18.00 x 25 • 14.00 x 24, 16.00 x 24, 20.5 x 25

Tracks • 618, 628, D6, D7, 200

Running Motors

• 8.3 5.9 Cummins; 671, 353, 453, 471, 6V53 • Detroit Diesel; 466, 414, 4276, • 4045 John Deere

Visit www.SkidderBuncherParts.com VISA & MASTERCARD ACCEPTED For More Info & Photos!

Page 52

Supply Post · supplypost.com

FELLER BUNCHERS FIREWOOD PROCESSORS

FORWARDERS

August 2022

LOADERS (Skid Steer)

2018 CASE TV380, t wo 2021 Tigercat LX830D 2 01 9 L B I F i r e w o o d Feller Buncher. 24” felling Processor. Completely selfhead. 585 Hrs. $750,000. contained, comes with discharge conveyor. Can cut Call Dan. 20 ft. lengths and 24” in DAN: (250) 308-7286 diameter. $95,000. Open to Advertise your machines in offers and/or trades. the classifieds! Call Jennie versatilebobcat@hotmail. for deadline and rates. com CALL: 1-800-663-4802 CHRIS: (604) 832-1775

PRINCE GEORGE

Your steep slope solution! 2017 H.S.M tethered clam bunk forwarder. Front or rear machine winch, grapple for loading, directional felling head. Brand-new drop-in engine, spare tire & wheel. Updated winch line to 3/4 inch, 12 ton assist. $425,000. For more info, please call Dan. DAN: (250) 308-7286

2018 Deere 324E Wheeled Skid Steer for Sale. 629 hrs. C/W smooth/tooth bucket, extra set of rubber for all 4 tires brand new, heat/ac, radio, air suspension seat, back up camera. Asking $60,000.00 OBO. Call or email for more info. Driven Equipment Ltd. Mac@drivenequipmentltd.com PHONE: 1-833-561-7866

GRADERS

LOADERS (Track)

I m m a c u l a te c o n d i t i o n ! 2013 Volvo G976 AWD. 6978 hrs. Joystick Controls, Ripper, Push Block, Rear View Camera, A/C, Radio. M e t i c u l o u s ly C l e a n & Serviced every 200 hrs. $102,500. FOB Central AB. c.cbaier@gmail.com PHONE: (780) 987-4450

2 0 2 0 K u b o t a SV L 7 5 Compact track loader, 74 Hp, Enclosed cab w/ AC, Joystick controls, 12.5” tracks, H yd. coupl ers. Ve r y g o o d c o n d i t i o n . 907 hrs. Asking $84,900. Abbotsford, BC. John.vanderknyff@agritrans.ca PHONE: (778) 201-9985

TRUCK & EQUIPMENT

250-561-1234 - www.pgtruck.com

1-800-946-9400 EQUIPMENT

• L120C Volvo Loader w/Bucket & Forks ............ POR. • Pair of 716KVA 600V Diesel GenSets ............... POR. • 1993 Ford 9030 w/Seppi Forest Mulcher ...$49,900. • 3412 Cat GenSet 906KVA, 600/480 Volt .......... POR. • TD20G & TD20E Dressers, w/winch & ripper....POR. • 2000 Timberjack 4x4 20K lb Forklift ...........$16,000. • Model 5000-21 Superlift Str. Boom Crane ......$3,950. • 2012 Alkota National Pressure Washer........$4,950.

TRUCKS & TRAILERS • 2008 T800 Kenworth TriDrive, Red ................... POR. • 1990 Peerless S/A Jump Jeep ........................... POR. • 42ft Fruehauf Camp TRLR w/Duetz, GenSet, Potable Water Tank. ................................................ $18,500. • Freightliner Classic & Cottrell Car Hauler......... POR. • 2005 Cancade Tridem End Dump ...............$28,500. • Tandem Clam Dump ...................................$14,500. • Tandem Pup Gravel Trailer ............................... POR. • 2005 F/L Tri-Drive Winch Tractor ...................... POR. • 1999 Superior Super B Logging Trailer ................. POR. • 1995 DCAP Tridem Clam Dump .................... $18,500. • Tridem Hayracks ................................................... POR. • Assorted Water Tanks and Trailers Available....... POR. • 2013 Volvo D13 Auto Shift................................ POR. • 1990 IHC DT466 Flat Deck ................................ $7,500. • 2009 Durastar S/A w/ Reefer Van .........................POR. • 1999 FL80 Tandem 24' Deck, Moffat Fork Lift ......POR. • 1986 IHC Tandem Water Truck....................... $17,900. • 1994 W/S Service Truck w/Fassi Crane ........ $26,500. • 2003 Sterling Tandem w/26’ Box ..................... POR. • 2014 BWS Ez-2-Load Hiboy 53' Tridem ............ POR. • 2012 IHC Prostar Autoshift Tractor .................. POR. • 1991 GMC Topkick Serv Fuel Truck, crane.$12,900. • 2005 Westec Vac Tank ..................................... POR. • 1990 ParPac Tri-Axle ........................................ POR. • 1990 KW T800, Cummins, 5th Wheel .........$10,500. • 1981 Ford, 20’ box, P/tailgate .......................... POR. • S/A & Tandem Axle Jeeps................................. POR.

WRECKING • Hyundai 2010 w/clam • 793 JD Buncher • 2200 Madill • 748G Skidder • G67 Clark • TD20E • Timberjack 450A & 520 Grapple Skidder • Hitachi EX200-5 • 230 & 404 Timberjack Line Skidder • Clark 668B Line Skidder • Clark 125B Loader • John Deere 693D • Treefarmer C7 & C8 Line Skidders • 82-40 Terex • TS24 • Warner & Swasey Grad-All 300 Hydro Cruiser • Good selection of Detroit Diesel, Allison, Clark, Twin Disc, Cat, Cummins and Perkins engine and trans. parts.

COASTAL PACIFIC EQUIPMENT coastalpacificeq@gmail.com

1-800-811-6911 • (250) 392-7755 685 South Mackenzie Avenue, Williams Lake, B.C. V2G 1E2

John Deere 440 Line Skidder.....................................$15,000 1996 Dresser TD 12C, 6-way blade, ripper ................$48,000 2002 Dresser TD 9H, 6-way & winch, 1200 hrs.........$58,000 1989 Dresser TD20G, A/blade or semi-U ...................$70,000 1995 Komatsu D85-21 with A/blade, ripper, enclosed cab .....................................................................................$45,000 Donaren Trencher with JD 748 mount, valve ................. CALL 1987 Dresser TD20G A-blade & ripper .......................$65,000 Cat 977K for parts, Trans shot ........................................ CALL Cat D8R angle blade and “C” frame ................................ CALL Cat D8R bush guarding package ..................................... CALL 6-Way Blade for Dressta TD 15M ................................... CALL

MISCELLANEOUS · · · · · · · · · · · · ·

D8R GUTO motor · D8R GUTO transmission D8R GUTO steering assy 8 kw Kubota gen set in shed, low hours 950F L4 tire and wheel IH 817C Motor New & Used Parts for IH-Dresser & Dressta machines TD12C, TD15C-E, TD20E-G-M clearing rakes TD20E-G-M, TD25E-G Semi U blades TD25C-E-G Full U Blades · CAT D7G Blade & C-Frame TD15C-E, TD20E-G winches TD8E, TD8G track group 30.5 x 32 Wheel & Tire for JD 648G New & Used parts for IH-Dresser-Dressta- JD648EKomatsu D65E · Wrecking Dresser 520, Dresser 530 wheel loader, Samsung 210LC, Cat D8R · JD748G3 Rear Axle Assy · JD748G3 Grapple Assy

Check us out on Facebook!

spd Compact Track Loader, CAT 988G (2014). 17,098 Frame hrs, 7,972 Idle hrs. 90 Hp, Encl. cab, AC, Michelin Tires, Spade Nose Joystick controls, Rear Bkt, Lincoln Auto Grease. Camera, 17 Pin Elec kit, Engine Rebuilt at 15,346 17.5 “ wide tracks, Hyd hrs, 0 hrs on Resealed Couplers, 84” bucket. This Trans, Torque, Dropbox, clean & powerful machine Co m p l e te ly I n s p e c te d , has only 758 Hours! Asking Fi l te rs c u t a p a r t a n d $77,900. Abbotsford, BC. Inspected, All Pressure John.vanderknyff@agri- Checks and Performance trans.ca Checks Completed. PHONE: (778) 201-9985 All Needed Repairs Completed. This is a Very LOADERS (Wheel) Clean Unit. Price: $CALL. M a rc e l E q u i p m e n t – London, ON Marcelequipment.com PHONE: (519) 686-1123

1974 John Deere 644A Loader project. Starts & runs well. Functions work. Transmission has a problem. $8000 OBO. Call or text. WAYNE: (587) 971-4245

1970s Cat 950. Old but runs OK, along w/ another 70’s Cat 950, w/ a broken transmission housing. Also 2 Buckets for a 950. Very good price if you take it all. Call or email Mike. Nanaimo, BC. mikegogo@shaw.ca MIKE: (250) 754-2276

NEED LOGGING TRUCKS OR TRAILERS? (5) 2014 Freightliner Logging Trucks .......$69,500 ea. DD16 18 spd. Tridem Locker, 430 Ratio, various Trailers ...............................................................$Call 2002 Western Star Tri-drive,18-Spd., Series 60 Camp Truck, 1999 ProFab ............................$26,000 2004 Freightliner Tri-drive, Camp Truck, Cat 18 Spd., 2001 ProFab ................................................. $32,500 2006 Western Star Tri-drive, Camp Truck, Cat 18 Spd., 2006 ProFab ........................................$35,500 2010 Western Star Series 60, 18 Spd., Tri-drive, Trailer Available .............................................$35,000 2006 Western Star C15 18-Spd., Trailer Available ..... .......................................................................$29,500 2003 Superior Tridem Trailer .........................$10,000 2006 Profab Tridem Trailer ............................$12,500 2002 Peerless Triaxle ....................................$14,500 2002 Superior Triaxle ....................................$10,500

10’ Bunks, 8’ Bunks, Headache Racks

MORE TRAILERS AVAILABLE

(2) 2006 Western Star Wrecks, C15,18-Spd .............. .................................................................$12,500 ea. BullMoose Shop Forklift...................................$5,000 1974 966C, New Fuel Pump .........................$24,500 Timberjack 404, Good Running, Good Rubber .......... .........................................................................$9,500

Tons of Parts - C15 Cores Ecms, Rads, Drive Shafts, Rear Ends, Tranny Parts, Etc. Too Much To List!

250-203-0134 ROYQUIP@GMAIL.COM

August 2022

LOGGING CONTRACT Looking to purchase an Evergreen Contract. Any location. Email for more info. Northlogging@outlook.com PHONE: (250) 997-5200

LUMBER 3” & 4” Lowbed decking up to 24’ long. 2x8 truck decking 12’ to 24’ long. Bridge timbers cut to size. Poles for pile driving, any size. Metal roofing and wall cladding. We deliver “even to the moon’. can-ambuildingsupply@ shaw.ca Can-Am Lumber Mill PHONE: (604) 580-1415 Equipment For Sale Online – We have thousands of equipment & trucks for sale at SupplyPost.com! Log on today... www.supplypost.com

MINING Owner retiring after 40 years - Yukon Placer mining company for sale. Turn key m i n i n g o p e ra t i o n . Water license good until April 2025. On 2 properties. Sale incl. claims, dwelling, large shop, good equipment & gold processing plants. Emails preferred please. cookisle49@yahoo.ca PHONE: (867) 993-4450

Supply Post · Our Readers Are Your Buyers

PARTS

(3) Diesel Plate Packers for Parts. All 3 for $600. 1 Wacker Neuson DPU6055, 2 Dynapac LG500. Campbell River, BC. Far North Contracting Ltd. tyler@farnorthcontract ing.com PHONE: (250) 895-9670 Refurbished (2018) Proline 36”-48” Rolli Cradle Head PROCESSORS Iron & 2 Cable Assemblies. Bought for a special project – used for 1 lift. Model CW36-48. Rated Capacity 25 Tons. $22,500. Nanaimo BC. Windley Contracting Ltd. mike@windleycontract ing.com 2 0 1 6 T i g e r c a t 8 8 0 PHONE: (250) 740-7311 Processor. With Waratah H T H 6 2 4 C p ro c e s s o r SAWMILLS head. Machine is in mint condition. 8,400 hours. 19 9 8 H e l l e H yd r a u l i c Sawmill, 64’ track, L.H. $399,000. Don’t miss this! Headrig 200 HP electric, Linkpartsltd.com dave@infinitywest.ca 16’ 4 headblock carriage DAVE: (604) 240-7977 42”, Helle computer setworks updated, 22” 2 saw vertical edger, 32’ 4 chain log deck, 46’ green chain, Barn cleaner system for sawdust, sawdust conveyor, several roll cases, Seacan full of spare parts, 2014 Hitachi ZX210F-3 banding tools. Processor w/ Southstar dan.reesor@xplornet.ca QS500 processor head. DAN: (403) 528-0084 18,079 hrs. $139,000. PHONE: (250) 468-1000

SCREENING EQ.

McCloskey 621 screener drum with ½” screens. Used only 50 hrs. $P.O.R. PHONE: (780) 623-1205

SCREEN PLANTS

PROPERTY Gravel Property for Lease in NW Ontario. Call for Details PHONE: (807) 475-5347 Ashley Roney: 250-845-9169 Ashley@majorequipsales.com

1-844-991-3169

EQUIPMENT FOR SALE 2013 John Deere 2154D Processor, Good Condition, 60% U/C, Newer Engine (Approx 4000 Hrs), Newer RH Final Drive, C/W Waratah HTH 622B, Timbermatic Computer System, Danfoss Controls, LED Lights, Heat, A/C, Stereo, Well Maintained, Work History Available, Ready To Work. 15,270 Hours ........ $120,000 2001 Caterpillar D8R Series II Dozer, Very Good Condition, 80% U/C, Newer Transmission, Torque, Left & Right Final Drives (All @ 10,715 Hrs), Newer Starter, C/W DAT Blade, Four Barrel Multi Shank Ripper, ROPS, Sweeps, Screens, New LED Lights, Espar Coolant Heater, Heat, A/C, Stereo, Work Orders Available, Very Well Maintained, Ready To Work. 12,250 Hours ................................. $190,000 2006 Volvo 210B LC Excavator, Good Condition, 70% U/C, Newer Engine, Newer Final, C/W 2 Buckets, Hydraulic Thumb, Q/A, Cab Guard, Heat, A/C, Well Maintained, Ready To Work. 9,800 Hours ....................................................... $69,000

Complete inventory & photos at: www.majorequipsales.com Like us on Facebook

8901 Penn Road, Prince George, BC Phone: 250-564-7226 · Fax: 250-564-7233 Email: scott@banningequipment.com

2019 - 850L LGP Crawler c/w Ripper Deere �� POR 2018 - PC290LC-11 Excavator Komatsu c/w bkt, thumb �� POR 2010 - EC360CL Excavator Volvo c/w Bkt & Thumb �� POR 2017 - D6T LGP Crawler c/w Ripper, 6 way �� $495,000 2014 - PC290LC-10 Komatsu c/w bkt, thumb �� $195,000 2012 - D65PX-17 Crawler Komatsu �� $265,000 2011 - D6T LGP Crawler 6 way Blade w/winch �� $295,000 Grader - Volvo G940 2011 c/w Snow wing, Ripper �� $99,500 2005 - CS563E Compactor Vibratory Roller �� $65,000

DOZER ATTACHMENTS

2016 Elrus 6 x 20 – 3 deck close circuit screen plant. Work Ready. $250,000. HUGH: (604) 657-7167

SILOS

3 brand new silos. 16’ tall & can be used for anything. Made out of 1/4 plate. $4,000 OBO ea. steve@agg-tech.com STEVE: (604) 857-3107

24 FT. EQUIPMENT TRAILER, BRANDT 2021, AS NEW TANDEM DUALLY ON 16 INCH, 10 PLY RUBBER, SPRING LOADED DROP BEAVER TAIL.............................$24,000

2009 Hitachi ZX210F-3 Forestr y Processor w/ Waratah 622B forestr y head. 24,710 hrs. $109,000. PHONE: (250) 468-1000

BANNING EQUIPMENT LTD

EQUIPMENT FOR SALE

FOR SALE Pictures Available

MINING CLAIMS Our loss, your gain. Estate says sell. Yukon Te rri to r y 12 . 7 8 m i l e s Placer claims=3,099 acres. History & repor ts available. 135 Claims with water licenses - 83 to 2028, 52 to 2030. One million equipment & infrastructure in place, with purchase of company. Buyer can start mining. $3.4 million USD. 140ukn@gmail.com PHONE: (509) 992-5419

ROLLER CRADLES

Page 53

1994 MADILL 120, GRAPPLE YARDER; • Live boom, counterweight kit • All logging rigging included • Sea can full of misc. parts and equipment • 2002 Cat 330 B - RB. undercarriage at 70% • Well maintained back spar attachment. Work ready package .....................................$895,000.00 OBO TANK DRILL, M32 w/3306, Cannon hammer. .. $30,000 OBO MADILL 099 YARDER, Working Condition. Excellent candidate for a dragline........................... $100,000 OBO MADILL 009 YARDER On Rubber c/w Ser. 60 .. $75,000 OBO 1980 MADILL 071 YARDER On Rubber, 6V92TA Four Axle Carrier, 4 Guy Lines, Work Ready ...... $100,000 OBO MADILL 009 YARDER, Converted To Drag Line, Cat Power c/w Drag Line Bucket ..............................$60,000 2008 WHEEL LOADER, Cat 950 H, with 11,300 hrs. Working condition, with scales and printer. Located in Hope, BC. Pictures available. TRY YOUR OFFER ....... ..................................................................................$80,000 DUNNAGE: 4 X 6 X 5 Ft. SPRUCE, new or as new F.O.B. in Hope, 64 pieces per bundle.............................$400.00

~HOPE MECHANICAL SERVICES~

~ PHONE ~ TEXT ~ EMAIL ~ GLEN AT 604-795-6827 ~ g.golos@telus.net RAY AT 604-860-3000 ~ easyhope@yahoo.com H.D. MECHANICAL / SALES & CONSULTING

Brush Rake - D5H Skidder - Finning 122”�� $5,500 Brush Rake - D7G - Destec Pin on 137” �� $7,500 Brush Rake - D6T - 144” Clip-on *New*�� $9,500 Brush Rake - D8K 150” �� $7,250 D6T Lift Cylinder Pivot Pin Kit 2995344K �� $2,500 Hard Bar - Crawler D6T Cat # 281-8491 �� $5,500 Ripper Shank/Tip Cat - New 9J3139 D6T/R/N �� $780 Ripper Shank - D7R - 3x? MS Shank �� $1,800 Ripper Shank - D8R - 3x13 MS Shank �� $3,000 Winch - D5H - Cat �� $12,000 Winch - D7H/R /D8N/R Hydraulic & Controls �� $12,500

WHEEL LOADER ATTACHMENTS Blade Snow 930K/938K EFI/Hyd/Ang/Fusion, 12 ft �� $13,000 Blade Snow - fits on 980G Log Grapple 14’ �� $1,500 Bucket - 950 Cat Pin-on 2�5 yard 103”w/teeth *New* �� $6,500 Bucket - 950M/962M 114” 4�75 yrd Pin On �� $8,750 Forks - 938G/H WBM Q/A 54”721D Case�� $4,500 Forks - 950H Q/A 48” �� $4,500 Grapple - 950G WBM 56” Log grapple �� $9,500 Jib - 930G/H - Cat IT Lugging�� $4,500 Secondary Steering Kits 950H/962H/966H/972H �� $3,500

MOTOR GRADER ATTACHMENTS Blade Snow - Brandt J/Deere Grader �� $3,250 Lift Grp� Front - 14H/14M - WBM �� $6,800 Lift Grp� Front - Cat 140H/M,160H/M WBM �� $9,250 Ripper - 14G - Cat MS �� $9,500 Ripper - 16G - Cat MS �� $9,500 Snow Wing - 14M - WBM Low Pro 13’ �� $16,500 Wobbly - 13 Wheel tow behind compactor �� $9,500 Wobbly Wheel - Cat, J/D, Volvo Graders 13 wh�� $15,000

SKIDSTEER ATTACHMENTS Auger Drive Bobcat Skidsteer hyd 9” bit & ext �� $4,500 Blade Snow - S590 Skidsteer Hydraulic angle 96” �� $4,500 Bucket HD Snow Skidsteer 74” �� $2,750 Root Rake - Bobcat Skidsteer Hydraulic 78” *New* �� $4,540 RotoTiller - Skidsteer Mower King ECSSTR072 68”�� $2,000 Hitch Receiver - Skidsteer 2” Hitch Receiver �� $650 Tires - Skidsteer Bossman 12-16�5 *New*�� $1,550

EXCAVATOR ATTACHMENTS Brush Rake - 35 - 36”John Deere WBM Q/A�� $4,000 Brush Rake - 200 - 66” WBM Q/A *New* �� $9,500 Brush Rake - 250 - 72” WBM Q/A *New* �� $11,500 Brush Rake - 300 - 72” WBM Q/A *New* �� $12,500 Bucket - 120 - 60” Cat Q/A 13-3/4” �� $5,500 Bucket - 120 - 54” Cat WBM Q/A�� $5,500 Bucket - 200 - 36” Craig WBM Q/A (ZX210) �� $6,500 Bucket - 200 - 60” Clean-up WBM Q/A *New* �� $8,100 Bucket - 250 - 36” Finning 325B FAS Q/A �� $5,000 Bucket - 250 - 42” Dig WBM Q/A *New* �� $11,000 Bucket - 250 - 66” Clean-up WBM Q/A��*New* �� $8,500 Bucket - 300 - 84” - 24” V-bucket WBM Q/A *New* �� $19,500 Bucket - 330 - 36” WBM Q/A ZX350LC-3 �� $7,500 Bucket - 330 - 48” WBM Q/A *New* �� $9,000 Bucket - 450 - 68” FAS Q/A Dig �� $7,500 Bucket - 450 - 24”- 90” V-bucket FAS �� $15,500 Bucket - 700 - 84” Cleanup WBM Q/A �� $15,500 Chuck Blade - 250 - WBM Q/A 86”�� $6,500 Chuck Blade - 330 - 84” Hyd Angle Finning �� $6,500 Chuck Blade - 450 - WBM 120” WBM Q/A �� $6,500 Compactor - EX150 Allied WBM Q/A 34”x36” Plate �� $3,500 Compactor - 250 NPK C8C C8100 WBM Q/A Plate �� $5,500 Coupler - 250 WBM Q/A �� $3,500 Coupler - 300 Cat Hyd Q/A �� $3,500 Coupler - 349E Cat FAS Q/A Manual cat �� $3,500 Grapple - 250 EFI Matgrapple WBM Q/C *Inoperable* �� $3,000 Ripper - 200 WBM Q/A Komatsu �� $6,500

CURRENTLY WRECKING THE FOLLOWING MACHINES 330L/330B/EL300B & D8N�� POR 320C/325B/325L/930G/938G/980�� POR Check www.banningequipment.com for parts list or call.

Supply Post · supplypost.com

SKIDDERS

TELEHANDLERS

1994 John Deere 748E. Comes with Donaren M o u n d e r. M a c h i n e & Mounder in good working order. 5768 hours on rebuilt engine. Wide 44 floater tires. $80,000. Athabasca, AB. Zell Industries Inc. les@zellindustries.com PHONE: (780) 220-3171 Equipment For Sale Online – We have thousands of equipment & trucks for sale at SupplyPost.com! Log on today... www.supplypost.com

John Deere 948L2 for sale in the Kamloops area. Well taken care of, all service records. New tires available, 4,900 hrs. $255,000. Terratim1@gmail.com PHONE: 1-250-320-1871

TRAILERS

2004 DOEPKER HB6505 42’ OILFIELD PICKER F LOAT, 4 2 ’ OA L , 8 ’ 6 ” Wide, Swing Out Lights, Rear Live Roll, Sliding Suspension, 2023 Certification…………POR 2022 JLG 1 0 5 5 Competition Trailer Sales Telehandler. 10,000 lbs matt@competitiontrailer Lift, 55’ Reach. Cummins sales.com D i e s e l E n g i n e ( T 4 F - PHONE: 1-833-903-3403 130hp). Fully Enclosed Cab w/ Heat & AC, Solid Tires, Outriggers, 4WD, 3 Steering Types (2 Wheel, Round, Crab), Hydraulic Frame Leveling, Auxiliary Hydraulics, Multi Function Joystick, 60” Standard Tilt Carriage, 60” Pallet 2011 Peerless tri axle w/ Forks, Lifting Hook, LED peerless bunks. Excellent Work Light Package, Block condition. $29,000. Heater, 1/2/5 Year JLG PHONE: (250) 341-1000 Factory Warranty Applies. In Stock in Langley & Edmonton. P.O.R. Adcock Equipment PHONE: 1-833-566-1817

TIRES ( 2 ) Toyo l o a d e r t i re s, 23.5x25, L-5, 80%. $5,500. PHONE: (604) 328-7424

BROWN INTERNATIONAL SERVICES

NEW PARTS for IHC - Dresser - In Stock, including Exchange Transmissions, Steering Drives & Drop-In Motors, Carco Gearmatic Winch Products • FULL TRACK PRESS FACILITIES Complete Excavator & Crawler Tractor Undercarriages Berco, Trek & Intertractor

MACHINES FOR SALE

• 1990 Dresser TD15C, c/w 8.3 Cummins engine, Carco 70 winch, DAT blade & logging guarding ...................$28,000 • TD15C 39 Link Track Group, c/w 22” pads .............. $POR · D-6 TD15E Grapple ................................................ $3,500 · TD15E Semi-U Blade.............................................. $2,800 · TD20 E/G double angle tilt blade .......................... $3,500 · TD7E Rails & Sprockets...................................... IN STOCK • TD15C Beales brush blade..................................... $4,000 · TD12 42 Link & TD15 39 Link Rails ................... IN STOCK • TD20G-20E Grapple ................................ Reduced $5,000 · TD20E/G/M 39 Link & 42 Link Rails ................. IN STOCK • Cat D7 17A Pup Engine.......................................... $2,500 · 924 Cat, New QA coupler, Weldco Beales.............. $1,500

WRECKING: IHC S8A Skidder; Cat D7 17A; Komatsu D85E-18, good U/C; TD20C Large Inventory Of New & Used International & Dresser Parts & All Brands of Undercarriage

“We Service What We Sell” Ph: (250) 546-6518 • Fax: (250) 546-3100 www.brownihc.com |E-Mail: info@brownihc.com 4274, Box 557 Hwy 97A North, Armstrong, B.C. V0E 1B0

2 012 Ad va n c e T C 4 0 7 Alum Tri Tanker, 11,000 US gal. Lined, Hyd. Roper pump, Titan Gauges, Auto Greaser, Extra plumbing & Led lighting, Centerfuse System. Michelin tires 95%. Like New cond. Only 32,500 Orig. Kms. $55,500. Melfort, SK. Keith’s Hauling Inc. PHONE: (306) 921-7721

TRUCK PARTS

Rebuilt 12 point 2004 Raja C h a s s i s. N ew l a n d i n g legs, new tires & rims, new brake shoes & drums and more. $13,500. Four Corners Forwarding fourcornersfwd@gmail. com PHONE: (778) 834-6273

2017 LodeKing Distinction Super B grain Hopper set, 28/30 ft, Excellent cond., fresh MVI. Asking $97,500. Abbotsford, BC. John.vanderknyff@agritrans.ca PHONE: (778) 201-9985

2021 near new Doepker Super-B Hopper trailers, 28/30 Ft, BFG 11-22.5 tires, Air scales, Manual tarps, Fresh MVI. Beautiful condition. $129,900 Firm. Call for more info. Abbotsford, BC. Agri-Trans Services Inc. John.vanderknyff@agritrans.ca PHONE: (778) 201-9985

Brandt Opens New Trailer Factory In Moose Jaw The Brandt Group of Companies is pleased to be opening a new utility trailer manufacturing facility in Moose Jaw with production expected to start in late summer 2022. Brandt plans to create up to 200 positions over the next three years including assemblers, welders, material handlers, engineers and supervisors. Hiring will begin immediately with the addition of 70 jobs. Brandt is hosting a career fair at the plant on Thursday, July 28, 3:006:30, at 76 Lancaster Road in the city’s north end. Brandt is very excited to become an active member of the Moose Jaw business community and we will

August 2022

be hiring local contractors to prepare the facility for production,” says Murray Yeager, Brandt Vice President, Manufacturing. “Later, when the upgrades are complete, we will em-

WANTED Looking for a heavy spec highway tractor & 60+ lowbed, preferably sold together. PHONE: (604) 340-9266

1979 Mack WL 712 LT. 300 plus engine, 15 spd (all runs), Tulsa winch & extras. As is, as a parts truck, frame deteriorated. $3,000 cash. Vanderhoof, BC. ALLAN: (250) 570-9723 OR: (250) 567-9798

Looking for self-loading log truck or self-load hayrack trailer. Call Mike. Schwab-5@telus.net PHONE: (250) 961-8864

WANTED: John Deere 4045TF250 industrial engine core. 125 HP. Call or TRUCKS email Brian. 2004 Freightliner FL80 BrianLds@telus.net dump plow truck. Cat die- PHONE: (250) 319-1636 sel, air brakes, new paint. OR (250) 573-4232 240,000 orig kms. Fresh WASH PLANTS CVI. $29,000. PHONE: (250) 457-0099

2012 Peterbilt, new 565 ISX engine. Many new parts. 250,000 kms since rebuild. $89,000. PHONE: (250) 341-1000

New Old Stock 36” x 18’ Coarse Material Washer. 25 HP 460 Volt motor. Trash collector overflow chute. For Sale or Rent. DAWSON: (604) 657-0065

TRUCKS (Off Hwy)

Selling equipment or trucks? Submit your ad (2) Komatsu HM-5 Artic Tr ucks. 13,000 Hrs to s e c u re ly o n l i n e n ow : 14,000 Hrs, Heated Box, https://www.supplypost. Retarder, 29.5R 25 Tires. com/advertise/classifieds. Many pr int and digital $P.O.R. options available. Let’s get KS Inc., Edmonton, AB it sold!!! Kenski5544@gmail.com PHONE: 1-800-663-4802 PHONE: (780) 990-9604

ploy local vendors for everything from supplies and janitorial services to maintenance and snow removal.” Moose Jaw was considered an ideal location, with its strong workforce and history as a centre for trailer production. The move is being made to free up space at Brandt’s North Regina Works campus to expand production for other

product lines. Brandt also has longterm plans for additional expansion to the plant to produce utility trailers for North-America-wide distribution. The 64,000 ft² facility was originally home to General Cable and was purchased by Brandt in 2012. b Source: Brandt BRANDT

Page 54

August 2022

Supply Post · Our Readers Are Your Buyers

Page 55

SEARCHING FOR PARTS?

The Completely Searchable Supply Post Parts Database Is Here!

WWW.SUPPLYPOST.COM/parts Truck Parts, Equipment Parts, And More èSearch By Part # èSearch By Keyword èLocate That Part You Need Before You Pick Up The Phone!

Page 56

Supply Post · supplypost.com

August 2022

WWW.OCEANTRAILER.COM

NEW BRANCH ANNOUNCEMENT - MISSION BC! TEMPORARY SHOP OPEN NOW. NEW FULL FACILITY OPEN LATE SUMMER 2022

MISSION – JULY UPDATE

FEATURING: • 10 bay shop with a full service wash bay and a tire bay • 8 acres fully paved

BREAKING GROUND IN PORT EDWARD, BC

• Rentals, parts, sales and service techs on staff • Easy access from Abbotsford/Hwy 1 – less than 15 minutes! “We are all very excited to be a part of the Mission community & are grateful to be able to grow our business into the Fraser Valley. The team at our new facility will make sure your fleet is repaired safely & back on the road in a timely manner. Give us a call anytime 604-455-0885.” Sydney Keay, Branch Manager Temporary address: 32915 Mission Way, Mission, BC

5 Service Bays Shop Offices

Official facility address: 32860 Mission Way, Mission, BC V2V 5X9

QUALITY NEW & USED TRAILERS IN STOCK NOW! CALL YOUR NEAREST OCEAN TRAILER BRANCH FOR QUALITY IN-STOCK USED TRAILERS.

B-TRAIN & TRIDEM HOPPER TRAILERS IN STOCK NOW!

Featuring Titan’s foremost building material - THIN WALL extruded, hollow-core panel.

• Reefer Vans • Dry Vans • Flat Decks

• Step Decks • Container Chassis • End Dumps & more!

2023 FONTAINE REVOLUTION 53FT ALL ALUM REAR AXLE SLIDE FLAT DECK. 6 Available.

www.oceantrailer.com 2023 FELLING SLIDE AXLE TILT DECK. 1 Available.

AVAILABLE FOR SALE OR RENT

(22) 2015 UTILITY TANDEM REEFERS

Mission (604) 455-0885

Delta (800) 891-8858

(35) 40’ HIGH CUBE

one tripper containers for sale.

Nanaimo (877) 878-5979

Prince Rupert (250) 627-1981

2023 RAJA STEP DECK WITH BEAVER TAIL & RAMPS. 2 Available.

Edmonton (800) 610-1019

Calgary (877) 720-7171

Winnipeg (866) 397-5524

10807 - 209 Street, Edmonton, AB T5S 1Z7

1-800-663-0715 • 780-452-7021 Fax: 780-453-1477

47 Forest Plain Road, Oro-Medonte, ON L3V 0R4

1-866-404-5233 • 705-325-2777 Fax: 705-325-9777

www.jadeequipment.com | info@jadeequipment.com

üPARTS üSERVICE üSALES üRENTALS

2001

VOLVO 720A

$48,600

Price quoted FOB Oro-Medonte (Orillia). Taxes and shipping extra.

6CT8.3 Cummins diesel engine (187 Net HP), 8400 fully sequential, direct drive, powershift transmission, 14’ moldboard, 1400x24 tires, brackets for future installation of rear mounted attachments.

Rebuilt Engine Fits Volvo 730 B from 2002-2005. Part # 12723466RX.

$45,000.00 CDN Prices are in Canadian Dollars, Taxes and Shipping are Extra – FOB Orillia

Celebrating 34 Years! 1988-2022