Supply Post West Sept 2015 by Supply Post Newspaper

SPONSORSHIP

Doosan Extends St. Andrew’s Sponsorship

PRODUCTS PAGE 10

EDUCATION

BUSINESS

Takeuchi Introduces The TS80 Skid Canada Investment Establishes Trades JCB Dealer Network Expands Into Steer To Their Line Up PAGE 22 Training Program PAGE 45 Western Canada PAGE 72

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER · SUPPLYPOST.COM

Family Owned Since 1971

WESTERN CANADA EDITION · $3.75 · SEPTEMBER 2015

EDGED, PRIMED AND MULCHIN’ LAND CLEARING: Roger Osmond Tree Services Clears The Competition With PrimeTech Mulchers.

COURTESY PRIMETECH

See Page 77

Advertiser’s Index ........6 Section Two ..............33 Classifieds .................55

Truck Photo Ads ........76

There when you need it, growing when you don’t.

SEPTEMBER 2015 · VOL. 44 · NO. 9

cwbank.com

Section Three ............65

Publications Mail Agreement #40070144

1.15%

Business Savings Account

*Rate is subject to change without notice. Interest is calculated on the daily closing balance based on the portion within each tier and paid monthly. Interest is paid as follows: 1.10% on deposits up to $250,000, 1.15% on deposits between $250,000.01 to $15 million and 0.25% on deposits above $15 million. Available in-branch only.

Page 2

Supply Post Western Canada Edition · supplypost.com

“Proudly Serving the Lower Mainland Since 1945”

NEW WEBSITE NOW RUNNING AT www.unitedearthcontractors.com

SALES Dave · 778-855-4190 davek.united@hotmail.com OFFICE 604-940-0001 · Fax 604-940-0005 RENTALS Tony · 604-230-4047 · ahc.united@hotmail.com

EARTH CONTRACTORS

September 2015

FALL SALE

• RENTALS • SALES • CONTRACTING •

USED EQUIPMENT FOR SALE Selection of 4 - A30D Trucks

2004 Caterpillar D6N LGP Crawler Tractor

ranging from 10-14,000 hours. All have good rubber. 1 is 23.5R25, 3 are 750/65R25. All good runners and recently serviced.

brand new Cat U/C, approx. 11,000 hrs. This Cat feels like new.

Starting at $130,000

$89,000 1 LEFT

$49,000 Volvo A25 This Volvo is one of our older Volvos,

but most reliable! Tires 65%, clean exterior truck with side boards.

$69,000 1999 Cat D35OE Rock Truck, well maintained, ex Metro Vancouver Machines, new paint.

$38,000

$62,000 D5M LGP Transmission just rebuilt, great tight machine with lots of life, new paint and 75% U/C. 8,000 hrs.

$180,000

Cat D4H LGP s/n 9db04913, great machine,

runs very well. c/w cab u/c 80%.

$55,000 Volvo A25 c/w tailgate - clean truck, strong runner, brand new rubber.

$69,000

unit is still very tight & clean all around. Tires all good, c/w load scale, 3rd valve, hyd. Q/C, GP bucket (not shown), also have forks & 18 yd chip bkt avail.

JD 350DLC 9100 hours approx, very tight maintained machine..undercarriage in good shape and all around look and feel of machine is great.

$39,000

Komatsu HA250 Water Wagon, great looking

and running machine. Very strong engine, 6x6.

$120,000

Volvo Water Wagon 4 x4 Volvo A25C 5000 gal tank. Also available for rent, call for pricing.

$95,000

2008 966H Low hours, very well maintained! This

$49,000

$89,900 2008 Caterpillar 325DL Q/C bucket, hyd thumb, 10ft 6in stick, aux hyd, A/C, 10,000 hrs.

2008 JD 225D LC - Amazingly tight unit,

U/C at 80% very clean machine with only 7000 hrs.

$30,000 ea Dyna Pac CA25’s very clean great runners, One is smooth, one pad foot. Take your pick at 30,000 ea.

LOOKS GOOD

$45,000 1965 Pontiac GTO 4 barrel, auto, very clean,

all original, 15 yr old restoration.

$45,000 2012 Bobcat T190 Tracks like new, low hours 1,300, fully loaded, great runner.

$75,000

$71,000

2002 CAT IT-38G INTEGRATED TOOL CARRIER c/w Q/C bkt, aux. hyd., cab, 20.5R25, additional accessories upon request. 10,000 hrs.

FIND MORE AT UNITEDEARTHCONTRACTORS.COM

$95,000 Volvo A25D clean machine, clean cab, 14,500 hrs, Michelins on the fronts.

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

SALES & RENTALS • 1-800-205-6633 • 604-671-1066

Page 3

SCREENS

Call us for your new and used screening & crushing equipment needs

bill@skreenquip.com • www.skreenquip.com

863 HEAVY DUTY TRACK SCREENER

873 HEAVY DUTY TRACK SCREENER

· Easily Set Up and Transport · Processes Up To 250 Tonnes Per Hour · Oversized Conveyor - Adjust from 15-24 Degrees

· 1.2m Belt Feeder w/ 7 cu.m. Manual Folding Hopper · Processes Up To 450 Tonnes Per Hour · Oversized Conveyor - Adjust From 18-24 Degrees

893 HIGH OUTPUT SCREENER

J-960 COMPACT TRACK JAW CRUSHER

· Engineered For Large Scale Quarrying · Processes Up To 800 Tonnes Per Hour · 6'20" Top Deck, 6'18" Bottom Deck

L L I B L L CA -1066 · Heavy Duty Hopper w/ Vibrating Grizzly

604-671

1170AS TRACK JAW CRUSHER

· 44" x 28" Compact and Aggressive Tracked Primary Jaw Crusher · Robust Hydrostatically Driven Jaw Chamber

· High Crushing Capacity Even In Hard Rock · Quick Setup Times and Easy Transport

684 TRIPLE DECK INCLINED SCREENER

· In Stock & Ready To Work · 14.5' x 5'5" on all 3 Decks · 4 Onboard Conveyors

NEW & USED EQUIPMENT AVAILABLE - CALL BILL AT 604-671-1066 SKREENQUIP SALES IS WESTERN CANADA’S AUTHORIZED EZYSTAK DEALER

Piano Wire Screens For All Makes Available

Page 4

Supply Post Western Canada Edition 路 supplypost.com

September 2015

WOODLAND EQUIPMENT INC. Kamloops 1-877-372-2855

Vernon 1-877-542-2280

Prince George 1-877-561-2456

Cranbrook 250-489-6131

Campbell River 250-286-0950

Fort St. John 250-787-1789

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 5

2013 POWERSCREEN XA400 TRACK MOUNTED JAW CRUSHER

•Output Potential: up to 400tph (441 US tph) • Independent pre-screen • Scania Tier IV engine • Efﬁcient direct drive system • Height adjustable product conveyor • Extended hopper – hydraulically folding • 725 hrs, CALL

• Maximum stacking height: 30’ at 22 degree incline • Heavy-duty construction • Radial undercarriage • Self-contained diesel • Approx. 80 HP • Hydraulic fold, raise and lower • Up to 800 TPH at 20 degree incline • 600 hrs, CALL

2014 – POWERSCREEN 36” X 7 4’ RADIAL STACKER

2008 TEREX PEGSON 1000 CONE CRUSHER

• Track mounted • CAT ENGINE • New Cone Liners • New Vulcanized Feed Belt • Metal detection system • Feed Sensor • 5800 hrs, CALL POWERSCREEN WARRIOR 1800

• (16’ x 5’) double deck tracked screener. • Tough, heavy duty machine built for screening • 2 or 3 way splitting and stockpiling • 520 hrs, CALL AVAILABLE FOR RENT OR SALE

• 11’ x 5’ double deck Four bearing box • 3 on board stockpiling conveyors • Hydraulic folding conveyors for a quick set-up • Screen walkways and access ladders for ease of maintenance • Drop down tail conveyor to aid screen media changes • 2500 hrs, CALL

5425 Production Blvd., Surrey, BC, V3S 8P6

Phone 604.530.5758 Fax 604.530.3554

Toll Free 1.888.530.5444 Focused on Parts for John Deere & Hitachi Late Model Excavators

POWERSCREEN CHIEFTAIN 1400 TRACKED SCREENER

• Very good condition • Engine service, hydraulic service, new hydraulic hoses, side doors, side conveyor feed boots, transfer lip and Paint • Can be ﬁtted with whatever screens required for your job • Ready to go to work • 6500 hrs, CALL

2007 POWERSCREEN CHIEFTIAN 2100 TRACKED SCREENER

• Output Potential: up to 350 tph (386 US tph) • Renowned Automax® crusher technology • Excellent shape, High reduction ratio • Hydraulic crusher setting, Cone overload protection • Heavy duty chassis and track frame, Metal detector • Dust suppression system • Efﬁcient direct drive system, CALL

POWERSCREEN 1300 TRACKED CONE CRUSHER

NOW WRECKING - JD200D LC

Spare and Wear Parts in stock – call for pricing! Delivery and In-House Financing Available

CRUSHERS

•

SCREENERS

Call: 403-988-2922

•

CONVEYORS

•

NEW & USED

Call: 780-819-7433

liam@bisoniron.com emmet@bisoniron.com

www.bisoniron.com

Components · Cylinders · Cabs · Engines Undercarriage · Booms · Sticks · Linkage www.langleyexcavator.com | parts@langleyexcavator.com

Page 6

Supply Post Western Canada Edition · supplypost.com

Riverside Equipment Rentals "LOCALLY OWNED AND OPERATED"

FOR SALE

ADVERTISERS INDEX 10 Douglas Lake Equipment

38 Langley Excavator

Action Lease

35 Dressta

31 LiuGong

Aero Auctions

51 E-Quip

59 LoneTrack

62 Magnum Attachments

22 ShearForce

26, 27 Eagle Coast Mining

Alberta Construction

58 Edge Equipment

44 Magnum Trailers

70 Skreenquip Sales

Alquip Diesel

70 FBC

75 Major Equipment

All Cut Systems

38 Finning

10 Michener Allen

27 Fiorentino Bros.

61 Moody’s Equipment

18 Specialized Trailer

Axis Forestry

58 Flintstone Mining

23 Mormak

B & G Parts

51 Foreman Equipment

33 Nor Mar

Banning Equipment

57 ForesTech

18 Norstone Excavating

5 Frank’s Repair 42 Frontier Power Products 5 Frontline Machinery

FOR OUR FULL LINE-UP & RENTAL RATES!

NEW TO THE FLEET

3, 44, 62 51 72

Timber Tools

Top Lift

62 Northland Chipper

42 Toro Steel Buildings

24 Omineca

19 Oversized Equip

Trak Tech

Bob’s Diesel

55 Gear Centre

50 P & R Truck Centre

65 Travelers Financial

Bobcat

30 Great West Equipment

11 Pacific Rim Equip

7 Truck Photo Ads

Brandt Tractor

16, 17 Groundworx

Brandt Value Parts

45, 61 Guytec

35, 37 Pacific Site Constructors

26 True North Equipment

62 Parker Pacific

73 Tundra Equipment

41 62

Brown International

59 Handlers

20 Peerless

Brutus Truck Bodies

29 Harbour International

69 Penner’s

Camex

66 High Terrain Helicopter

57 Pierce Pacific

Canadian Public Auction

28 HKX

50 PM Industries

71 Tyalta

58 Pollard (Chilliwack)

12 Tysea Mfg.

64 Prince George Truck

Canadian Western Bank

VISIT: WWW.RIVERSIDEEQUIPMENT.COM

Sommer’s Generators

AMI Attachments

Bison Iron

Sexsmith Used Farm Parts 40

Alberta Engines

Blanche Equipment

4,103 hrs, hydraulic blade and thumb, side shift boom, 24" steel pads, digging and clean up buckets, aux. hydraulics......................................................... $65,000.

5 Saratoga Ventures

Accurate Fabricating

Black Gold

2011 KUBOTA KX080 EXCAVATOR

September 2015

1 Hope Mechanical

Case

39 ICUEE Demo

CE Heathcote

58 Inland Equip Sales

Chieftain

50 Interior Diesel

Christian Valley Service Coastal Pacific Equip

8 Prolenc

Twin Deer

United Earth Contractors

37 Puget Sound Truck

79 Van Ed

62 International Machinery

67 Ramsey Co.

60 Iron Planet

63 Red Deer Oil & Gas Expo

COFS

54 J. E. Mathers

55 Revolution Equip

Coldstream

37 Jade Equipment

22 Ridge Lowbed Service

Continental Equip

14 James Western Star

61 Riverside Equipment

Crawler Sales

43 Jantzen Enivronmental

60 Rocky Mountain Equip. 48, 49

Dan-O Contracting

62 Jordef Enterprises

56 Rollins

14, 53

Vancouver Trac Parts

Vermeer

40 VI Equipment

Wacker Neuson

27 Wally’s Private Parts

59 56

Diamond Industries

41 Kitimat Iron & Metal

56 Ross Stevens Welding

62 Warner HD Parts Direct

Digger Rentals

46 Kobelco

21 Rototilt

Dolphin Mechanical

62 Korpan

26 Royquip

Doosan

52 Kubota

13 RWF Bron

36 Woodland

Westcon

NEXT DEADLINE: Friday, September 18th, 2015 Produced by:

www.postpublishers.com #105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5

www.supplypost.com ■ www.truckpost.ca PHONE (604) 607-5577 ■ FAX (604) 607-0533 ■ TOLL FREE 1-800-663-4802 Managing Partner ...............................Gary Mazur Sales Manager ................................... Jeff Watson Regional Account Manager .............Jake Peterson

VOLVO A30F ARTICULATING TRUCK

Call Ernie or Daryl Today!

1-800-566-0557 Email ernie@riversideequipment.com daryl@riversideequipment.com

Cell Ernie: 604-854-0583 Daryl: 604-309-3980

WWW.RIVERSIDEEQUIPMENT.COM 3112 Pratt St., Abbotsford, BC V2S 3C7 Phone 604-556-0557 • Fax 604-556-0559

Regional Account Manager ...........Shantal Horner Regional Account Manager ...............Owen Baxter Regional Account Manager ...............Jethro Horca Classified Sales............................Michelle Villiers

CIRCULATION

Direct Mailed copies .............. 14,200 Newsstand copies .................... 2,200 Total distribution .................... 16,400 Please call our office for full details

Sales/IT ..............................................Gary Mazur Marketing/Circulation Manager ... Christine Mazur Controller....................................... Debra Watson Accounting Assistant ...................... Heather Egeto Editorial/Production Assistant ........... Sheryl Kaye Art Director ......................................... Linda Horn Graphic Designer .............................Lisa Schmale Graphic Designer ....................... Carol Van Muyen Published Monthly - Printed in Canada Publications Mail Agreement No. 40070144 Reproduction of any material including photographs and/or advertisements in whole or in part is forbidden.

The Supply Post is a proud member of the following Trade Associations:

INTERIOR LOGGING ASSOCIATION

RETURN UNDELIVERABLE CANADIAN ADDRESSES TO CIRCULATION DEPT.: (Covers/Labels Only) No. 105, 26730 - 56th Avenue, Langley, BC V4W 3X5

9 4

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Phone: 250-493-4545 Fax: 250-493-8819 AFTER HRS: Joe Hewer 250-490-6795 Dave Garnett 250-490-7976 Quality construction equipment made in Japan

$37,500

2008 HITACHI ZX75UR 18" PADS, BOR, Q/C, HYD. THUMB, BLADE, 221 HRS

Page 7

www.pacificrimequipment.com

E-Mail: sales@prequip.com 1698 Dartmouth Rd, Penticton, BC V2A 4B8

Dealer for

Compaction Equipment

$89,900

2009 CAT IT38H, 20.5R TIRES, HYD Q/C, AUX HYD, R/C, 11,198 HRS, VERY CLEAN

$71,900

2005 HITACHI ZX225USLC 32" PADS, AIR, AUX PIPING, HYD Q/C, 6,560 HRS

RENT OR RENTAL PURCHASE AVAILABLE EXCAVATORS

2014 YANMAR VIO17 RUBBER, EXP. U/C, HYD THUMB, 430.9 HRS .....$28,900 NEW YANMAR VIO25-6 RUBBER, CANOPY, HYD Q/C, HYD THUMB ............POR 2005 HITACHI ZX35U-2 RUBBER, A/C CAB, 6,526 HRS .......................$23,500 NEW YANMAR VIO35-6 STEEL/ RUBBER, CAB, AIR, NEW MODEL IN STOCK...POR NEW YANMAR VIO45-6 RUBBER, CAB AIR, NEW MODEL IN STOCK ..........POR NEW YANMAR VIO55-6 STEEL, CAB AIR, NEW MODEL IN STOCK .............POR 2004 YANMAR B7-5 BOLT ON RUBBER, BLADE, A/C CAB, 5,193 HRS ..$25,900 2006 HITACHI ZX75US-A 18” PADS, BLADE, A/C CAB, 2,956 HRS ......$49,900 2012 KOMATSU PC78US-8 18” PADS, BOR, Q/C, HYD THUMB, BLADE, 221 HRS ....................................................................................................$89,900 NEW YANMAR VIO80-1A STEEL PADS, CAB/AIR, BRAND NEW..................POR NEW YANMAR SV100-2 STEEL PADS, CAB/AIR, 22,000LB MACHINE ........POR NEW YANMAR SV100-2 STEEL, CAB AIR, HYD Q/C, HYD THUMB, NEW .....POR 2008 HITACHI ZX120 20” PADS, A/C, PIPING, 2,619 HRS ....................$74,900 2010 CAT 312D 24” PADS, AIR, LONG ARM, ONLY 1,124 HRS ...................POR 2012 CAT 312D 20” PADS, AIR, ONLY 1,484 HRS ......................................POR 2012 CAT 312D 24” PADS, AIR COND, PIPING, ONLY 434 HRS...................POR 2010 CAT 313D CR 20” PADS, AIR, ONLY 1,651 HOURS ......................$94,900 2000 HITACHI EX135US-5 20” PADS, DOZER BLADE, PIPING, 3,907 HRS ....$44,900 2004 HITACHI ZX135US 20” PADS, AIR, Q/C, PIPING, 8,650 HRS ........$41,900 2008 HITACHI ZX135US 28” PADS, AIR, L. ARM, Q/C DIG BKT, 1,829 HRS.. $99,900 2011 HITACHI ZX135US-3 20” PADS, AIR, ONLY 2,216 HRS ...............$99,900 2011 HITACHI ZX135US-3 20” PADS, AIR, ONLY 2, 859 HRS ..............$88,500 2012 HITACHI ZX135US-3 24” PADS, AIR, 9’10” ARM, ONLY 813 HRS .. $139,900 2013 HITACHI ZX135US-3 20” PADS, AIR, DOZER BLADE, PIPING, 1,263 HRS . .........................................................................................................$134,900 2013 HITACHI ZX135US-3 20” PADS, AIR, DOZER BLADE, ONLY 550 HRS ... SOON 2013 HITACHI ZX135US-5 28” PADS, AIR, BLADE, Q/C, 1,530 HRS...$139,900 2013 KOBELCO ED150-2 6 WAY DOZER, HYD, THUMB, ONLY 671 HRS . $179,900 2011 HITACHI ZX160LC-3 28” PADS, AIR, AUX HYD PIPING, ONLY 6,300 HRS .. ...........................................................................................................$97,500 2012 DEERE 160G LC 24” PADS, AIR, DIG BUCKET, 5,833 HRS ...........$97,500 2012 CAT 316EL 28” PADS, AIR, RV CAMERA, ONLY 1,548 HRS, Q/C, HYDRAULIC THUMB, DIG BKT ............................................................$171,500 2008 HITACHI ZX200LC-3 32” PADS, 4,619 HRS, C/W 55’ LONG REACH FRONT .....................................................................................SALE OR RENT 2009 HITACHI ZX200-3 24” PADS, AIR, Q/C, HYD THUMB, 3,606 HRS... $94,900 2009 HITACHI ZX200-3 24” PADS, AIR, ONLY 3,577 HRS....................... SOON 2011 HITACHI ZX200LC-3 32” PADS, AIR, ONLY 2,620 HRS, Q/C ......$134,900 2012 HITACHI ZX210LC-3 28” PADS, AIR, HYD THUMB, Q/C, CABGUARD......... ....................................................................................................... FOR RENT 2012 HITACHI ZX210LC-3 28” PADS, AIR, HYD Q/C, HYD THUMB ... FOR RENT 2013 HITACHI ZX210H-3 24” PADS, Q/C, HYD THUMB, CABGUARD, 1,230 HRS ..................................................................................................$159,900 2013 HITACHI ZX210LC-5 32” PADS, Q/C, HYD THUMB, CABGUARD, 1,057 HRS ................................................................................................ FOR RENT 2007 DEERE 225D LC 32” PADS, AIR, HYD THUMB, Q//C, 7,450 HRS ..$89,900 2008 DEERE 225D LC 32” PADS, AIR, HYD Q/C, HYD THUMB, 5,137 HRS ...$109,900 2008 KOMATSU PC228US-3EO 24” PADS, AIR, ONLY 3,457 HRS ........... SOON 2010 DEERE 225D LC 32” PADS, AIR, 5,960 HRS, Q/C, WRIST BKT & DIG BKT . .........................................................................................................$114,900 2013 HITACHI ZX225USLC-3 32” PADS, AIR, Q/C, HYD THUMB, CABGUARD .... ....................................................................................................... FOR RENT 2013 HITACHI ZX225USLC-3 32” PADS, AIR, Q/C, HYD THUMB ...... FOR RENT 2015 HITACHI ZX245USLC-5 32” PADS, AIR, Q/C, HYD THUMB ...... FOR RENT 2015 HITACHI ZX245USLC-5 32” PADS, AIR, Q/C, HYD THUMB, CABGUARD .... ....................................................................................................... FOR RENT

Ski Apex Mountain Resort Tel 1-877-777-2379 www.apexresort.com

2007 HITACHI ZX350LC-3 AIR, HYD THUMB, AUX HYD, CABGUARD, 4,990 HRS .........................................................................................................$134,900 2008 HITACHI ZX350LC-3 32” PADS, AIR, ONLY 6,226 HRS .................. SOON 2011 KOMATSU PC308USLC-3EO 32” PADS, AIR, 4,174 HRS, Q/C, DIG BKT..$167,500 2011 KOMATSU PC350LC-8 AIR, Q/C, CABGUARD, Q/C, HYD THUMB, 1,998 HRS ..................................................................................................$214,900 2013 KOMATSU PC350LC-8 24” PADS, AIR, Q/C, HYD THUMB, CABGUARD ..FOR RENT 2013 CAT 336E L 33” PADS, AIR, RV CAMERA, CAB GUARDS, CATWALKS, Q/C, 48” DIG, 72” CLEAN UP, HYDRAULIC THUMB, 2,900 HRS ...................$274,900 2007 HITACHI ZX450LC-3 36” PADS, AIR, HYD Q/C, AUX PIPING, 7,677 HRS ... .........................................................................................................$159,900

DOZERS

2008 CAT D3K XL PAT DOZER, MS RIPPER, OROPS, 2,174 HRS ..........$63,900 2007 CAT D6N XL 6 WAY DOZER, DIFF STEER, MS RIPPER, 4,375 HRS ..$185,900 2007 CAT D6R XL SIII S/U TILT DOZER, MS RIPPER, DSTEER, 5,191 HRS ..$127,500 2011 KOMATSU D65EX-16 SIGMA DOZER, A/C, CAB, MS RIPPER, ONLY 3,998 HRS ..................................................................................................$189,900 2004 CAT D8R SII S/U TILT DOZER, MS RIPPER, 9,580 HRS ..............$194,900

WHEEL LOADERS/SKID STEERS/BACKHOES

2013 YANMAR V4-6 HY STAT, CAB, ONLY 223 HOURS ........................$49,900 1990 DEERE 444E 17.5 TIRES, CAB, BUCKET, 11,611 HRS..................$21,900 2006 KOMATSU WA250-5 20.5 HRS, Q/C BUCKET, CAB, 11,142 HRS .$62,900 2012 KOMATSU WA250PZ-6 20.5R TIRES, CAB AIR, HYD Q/C, AUX HYD . $127,900 2006 KOMATSU WA320-5 20.5R TIRES, CAB AIR, R/C, 4,460 HRS......$99,900 2011 KOMATSU WA320-6 20.5R TIRES, CAB AIR, R/C, Q/C BKT, 3,012 HRS ..$132,500 2007 KOMATSU WA380-6 23.5R TIRES, CAB AIR, R/C, ONLY 5,406 HRS. $114,900 2007 KOMATSU WA380-6 23.5R TIRES, CAB AIR, R/C, Q/C, BKT/FORKS, 3,600 HRS ................................................................................................ FOR RENT 2011 CAT 950H 23.5 L-5 TIRES, CAB, AIR, ONLY 1,815 HRS ........... FOR RENT 2007 BOBCAT 463F 44” BUCKET, CANOPY, 1,379 HRS .......................$11,900 2007 BOBCAT S130 GP BUCKET, CANOPY, ONLY 1,864 HRS ...............$18,900 2010 BOBCAT S205 GP BKT, CAB AIR, ONLY 1,751 HRS, 2 SPEED ......$32,900 2012 CAT 259B3 HYD Q/C 80” BKT, 2 SPEED, CAB AIR, 595 HRS, TRACKED LOADER ..............................................................................................$59,900

Ski Apex Mountain Resort Tel 1-877-777-2379 · www.apexresort.com

SEPTEMBER SPECIAL $21,900

1997 HITACHI EX135UR, 20" PADS, BLADE, OFFSET BOOM, 5,638 HRS (AS IS), GOOD U/C

2013 CAT 246C HYD Q/C 74” BKT, 2 SPEED, CAB AIR, 1,918 HRS .......$36,500 2013 MUSTANG 2700V 70” GP BKT, CANOPY, ONLY 214 HRS .............$30,500 2014 CAT 252B3 72” GP BKT, A/C CAB, 2 SPEED, HYD Q/C, 223 HRS..$49,900 2013 CAT 262C2 72” GP BKT, A/C CAB, HYD Q/C, ONLY 2,460 HRS.....$33,500 2013 CAT 262D 72” GP BKT, A/C CAB, 2 SPEED, ONLY 299 HRS .........$54,900 2013 CAT 272D XPS 72” GP BKT, A/C CAB, 2 SPEED, HI FLOW, 145 HRS . $59,900 1998 CAT 416C IT 4X4, EXTENDAHOE, 4 IN 1, 9,600 HRS ...................$29,500 2006 DEERE 310SG 4X4, EXTENDAHOE, 4 IN 1 BKT, 9,250 HRS ............ SOON

GRADERS / COMPACTORS

2010 CAT 140M VHP 14.00R24 TIRES, 14’ MB, A/C CAB, 2,841 HRS .. FOR RENT 2009 CAT 14M VHP 20.5R TIRES, 16’MB, ACCUM, A/C, 9,586 HRS ...$179,900 2006 ING. RAND SD25D 42” DRUM, KUBOTA ENG, 726 HRS .......... FOR RENT 2006 ING. RAND SD45D TF 54” DRUM, CUMMINS B3.3 ENG, 960 HRS . $36,900 2012 SAKAI SV505T-1 84” SMOOTH DRUM/PADFOOT SHELL KIT, CAB AIR, 727 HRS ................................................................................................ FOR RENT

DUMP TRUCKS

2005 CAT 730 23.5 TIRES, AIR, TAILGATE, ONLY 2,026 HRS ............ FOR RENT 2008 VOLVO A30E 23.5R TIRES, 30TON ART TRUCK, 6,368 HRS..... FOR RENT 2011 VOLVO A30F 23.5 TIRES, RV CAMERA, EMERG STEER, 4,403 HRS .. FOR RENT 2011 CAT 730 750/65R25 TIEWA, RV CAMERA, HTD BOX, 4,123 HRS .. FOR RENT 2012 TEREX TA300 GEN 9 23.5 TIRES, RETARDER, RV CAM, 3,400 HRS....$199,900

LIFTS & LIFT TRUCKS

1999 CAT 938G 25,000LB, SIDE SHIFT, A/C CAB, 16,850 HRS.............$39,900 2007 CAT TL943 9,000LB CAP, A/C CAB, TILT CARRIAGE, 5,388 HRS ..$47,500 2008 CAT TL943 9,000LB CAP, A/C CAB, TILT CARRIAGE, 2,105 HRS ..... SOON 2005 JLG G943A 9,000LB, CAB, TILT CARRIAGE, 6,600 HRS...............$44,900 2008 GENIE GS-1930 19’ SCISSORLIFT, 500LB CAP, 234 HRS ..............$9,250 2005 GENIE Z45/25J 4X4 DIESEL, ONLY 1,424 HRS, 45’ LIFT .............$35,900 2006 GENIE Z45/25J 4X4, DIESEL, ONLY 1,700 HRS, 45’ LIFT ............$39,900 1999 GENIE Z60/34 4X4, ART. BOOM LIFT, DUAL FUEL, 4,300 HRS .....$26,900 2006 JLG 600AJ 4X4, ART BOOM LIFT, CAT ENG, 4,500 HRS ...SALE OR RENT 2004 GENIE Z80/60 4X4, DIESEL, 3,807 HRS, 80’ LIFT ............SALE OR RENT

MISCELLANEOUS

2001 INTERSTATE 23 FT T/A LOADING RAMPS, 3,500LB AXLES ..........$4,250 2006 POWERSCREEN 1400 CHIEFTAIN 2 DECK SCREENING PLANT ON TRACKS, ONLY 2,200 HRS .................................................................$124,900 2007 WACKER DPU1000 1,000LB REVERSIBLE PLATE .........................$4,000 NEW WACKER WP1550A 200LB REVERSIBLE PLATE, HONDA ..................POR NEW WACKER BPU3050A 400LB REVERSIBLE PLATE, HONDA, WHEEL KIT...POR NEW WACKER DPU6055HE DIESEL REVERSIBLE, 1,000LB PLATE ............POR NEW WACKER BS50-4 4 STROKE RAMMER, ONLY 145LBS ......................POR

USED BUCKETS, THUMBS, ATTACHMENTS, PARTS

WELDCO BEALES 938G BUCKET 3 1/2 YD, BOE, EXCELLENT COND .....$4,500 2001 CAT 980G BUCKET 7.5 CUYD, 134” WIDE, 5,416LBS .................$10,900 NEW PC200LC-8 15.5 METER LONG REACH BOOM, ARM ...................$16,900 NEW EXCALIBER X36 MECHANICAL THUMB............................................$650 NEW ERSKINE BOBCAT 72” SNOW/LIGHT MATERIAL BUCKET, BOE ......$1,850 NEW ERSKINE BOBCAT 84” SNOW/LIGHT MATERIAL BUCKET, BOE ......$1,990 NEW ERSKINE BOBCAT 84” POWER ANGLE BROOM, POLY/STEEL WAFER .$4,800 NEW TOMAHAWK BOBCAT 66” SMOOTH EDGE SKID STEER BUCKET......$750 NEW TOMAHAWK BOBCAT 72” SMOOTH EDGE SKID STEER BUCKET......$850 1993 CAT 140G MS RIPPER .................................................................$7,990 NEW SKELETON 54” BUCKET Q/C EARS FITS 200 SIZE ........................$3,990 NEW VERSATECH 66” LOG GRAPPLE BRUSH AND ROCK GRAPPLE ......$1,699 USED DEERE BR72 77” PICK UP SWEEPER...........................................$3,990 NEW 48” HLA HD SKID STEER FORKS....................................................$900 BMI 42” CLEAN UP BKT, TO FIT JD410J TC BO EDGE .............................$400 DESTEC V BUCKET ZX350, 86” X 22”...................................................$2,350

PACIFIC RIM RENTS! www.pacificrimequipment.com

after hrs call: JOE HEWER 250-490-6795 joeh@prequip.com ■ DAVE GARNETT 250-490-7976 dave@prequip.com

Page 8

Supply Post Western Canada Edition · supplypost.com

HEAVY DUTY PARTS & SERVICE www.pennersheavyduty.com

CALL US TOLL FREE 24 HOURS A DAY, 7 DAYS A WEEK

WE ARE CONNECTED TO OVER 800 DEALERS WORLDWIDE: LET US FIND THE PARTS YOU NEED! MAKE US YOUR FIRST SOURCE FOR ALL YOUR CATERPILLAR PART NEEDS!

FOR SALE

CAT D8K

CAT D7H

C/W DOUBLE ANGLE BLADE AND C-FRAME AND TWO BARREL RIPPER ... P.O.R.

WRECKING • CAT D7G W/RIPPER • CAT 140G GRADER • IT12B LOADER • 920 LOADER • 930 LOADER • D7E DOZER • D9G DOZER

CAT 325L

CAT EL300

3000 MAGREGOR ROAD, PRINCE GEORGE, BC V2N 6E2

TOLL FREE: 1-800-663-8210 | OFFICE: 250-963-6600 | CELL: 250-961-0279 | FAX: 250-963-8822 | KEN@PENNERS.CC

September 2015

Terex Finlay Launch New C-1545 Tracked Mobile Cone Crusher The new C-1545 cone crusher is the latest addition to the Terex Finlay range of tracked mobile cone crushers. The mid-range Terex Finlay C-1545 offers operators a high capacity and aggressive cone crusher for the surface ore mining and aggregate industries. This efficient and highly productive machine incorporates the new Terex TC1150 cone crusher with direct variable speed clutch drive, automatic tramp relief and ‘on-thefly’ hydraulic adjustable closed side setting (CSS) adjustment. The large hopper/feeder has an automated metal detection and a purge system to protect the cone and reduce downtime by removing metal contaminants via the purge chute. The large hopper/feeder has an automatic metal detection and purge system to protect the cone and reduce downtime by removing metal contaminants from feed belt at the touch of a button. Additional benefits in-

clude rapid set up time, ease of maintenance, high reduction ratio, advanced electronic control system, high output capacity and gives excellent product cubicity. Key Features: • New Terex TC1150 cone crusher provides high reduction and productivity ratios and gives excellent product cubicity. • Fully Hydraulic CSS adjustment with electronic monitoring system ensures ease of operation. • Fuel efficient direct drive transmission through wet clutch. • Hydraulic Tramp Relief System with automatic reset protects the chamber and minimizes downtime. • Metal detection system on feed belt with ‘autostop’ protects the cone from tramp metal and the purge system removes contaminants from the machine. For further details, please visit www.terex finlay.com. b Source: Terex

www.inlandequipment.com • sales@inlandequipment.com • 150 Industrial Place, Penticton, B.C. Call Vic Kampe For Details BACKHOE/LOADERS/ EXCAVATORS/FORKLIFTS 1998 JCB 930 Rough Terrain Forklift, 28', 3 stage, side shift, 6,000 lb, Perkins diesel ..................... Call. 2008 Cat 420E Backhoe, 4x4, 4-in-1, ext. hoe ....Call. 1990 Cat 426 Backhoe, 4x4, ext. hoe .................. Call. 1968 Cat 950, bucket machine ............................Call. 1996 Skytrak 5028 HiTorque, 5000 lb .......... $24,000. 2004 Terex TX760B, A/C, ext. hoe, 4x4, aux. hyd., new tires, 2300 hrs..................................... $45,000. 2004 John Deere 710G, 4x4 backhoe, ext. hoe, 4,400 hrs ..........................................................Call.

CRAWLERS/WHEEL LOADERS/SKID STEERS 2012 Bobcat T750, closed cab, 1,879 hrs ...........Call. 2012 Bobcat T650, 1465 hrs, closed cab, A/C, heat, hand and foot controls, floats, hyd detach, bucket leveler. .......................................................$45,900. 2009 Bobcat T250, 2,237 hrs, new tracks, cab, foot controls, A/C, heat ...................................... $39,000 2009 Bobcat T320, closed cab ............................Call. 1976 Cat 930 Wheel Loader, 9,700 hrs ..............Call. 1969 Cat 950 Loader, 50% tires .........................Call. 1995 Cat 950F Series II, bkt machine, 40% tires....Call. 1972 Cat 966C, bkt machine, 3rd valve......... $29,000. 1987 Cat 966D, bucket machine...................$65,000. (2) 2005 Cat 246B Skid Steer, closed cab ..........Call. 2014 Cat 252B, cab, 475 hrs ...............................Call. 2004 Cat 287 Skid Steer, rubber tracks, 1300 hrs ....... Call. 2005 John Deere 544J, bucket machine .............Call. 2007 John Deere 544J, Q/C, bkt, 3rd valve ..$69,000. 1993 John Deere 624G, bucket machine ............ Call. 1983 John Deere 644C, bkt machine ........... $21,000.

GRADERS & DOZERS 2005 John Deere 772CH, 9,286 hrs, 17.5 x 25 ice radials @ 90%, floats, 14' MB, 2' ext. ripper (wing & dozer available) ......................................$89,000. 2004 John Deere 772CH, 7,600 hrs, 17.5 x 25 radials @ 50%, ripper (wing & dozer avail.) ..........$89,000.

Ph: (250) 493-6791 Fax: (250) 492-2762

1984 Cat 120G Grader, 14 x 24 tires, scarifier ....Call. 2007 Cat 14H VHP, ripper, push block, 20.5 x 25 tires @ 60% (wing available) ....................................Call. 2006 Cat 14H, c/w ripper, 20.5 x 25 tires ............Call. (2) 2006 Cat 140H Graders .................................Call. (2) 2003 Cat 140H Graders .................................Call. (2) 2001 Cat 140H Graders, 14' MB, Low Pro cab, ripperCall. 1995 Cat 160H VHP, c/w ripper ........................... Call. 2003 Cat 160H, 12,500 hrs, eng. done 9,900 hrs, trans done 11,500 hrs, W/Os available, ripper & wing available .................................................... Call. Used Huber Maintainer/Grader ........................... Call. 2010 Cat 160M, 16' MB, circle clutch, accum., A/C, fenders, spare valves ......................................... Call. 2008 Cat 160M, 14' MB, ripper, 8,200 hrs, accum., A/C, 14 x 24 tires @ 75%, wing avail., ripper..... Call. 1976 John Deere 570A ........................................ Call. 1980 John Deere 570A, 12' MB ........................... Call. 1992 John Deere 770BH, 14x24 tires 95% .........Call.

BELLY DUMPS, LOW BEDS & TILT TRAILERS (3) 2012 7 Ton 24' Trailers, c/w 4' sides & ramps ... Call. 2015 Trailmax 27 Ton Triaxle Tilt Deck, 25' tilt, 5' stationary.................................................... $36,900. 1993 Trailmax T/A 21 Ton, tilt w/paver ramps ............ ................................................................... $16,900. 1989 Beall Tri-Axle Super Single Pup Trailer, alloy wheels, alum. box, 15' tarp ............................... Call. 1998 Loadline 14' Gravel Pup, tarp, 85% rubber ................................................................... $21,900. 1990 Peerless T/A Lowbed, c/w booster, detach, neck ext. 8'6" x 21' deck, new paint ........................... Call.

• WILL PURCHASE QUALITY USED EQUIPMENT • TRY YOUR OFFER, NO REASONABLE OFFERS REFUSED

1991 TrailKing 50 Ton Tridem, 8'6' x 25' deck, detach, beaver tails, A/R susp, narrow neck, set up for neck ext. new paint ...................................... Call. 1994 Dorsey 53' Tri Axle Reefer Van ............. $8,500. 2009 Felling FL-20PT, 10T, elec. brakes ............. Call. 1995 CZ, 12 ton trailer, Budd wheels ...................Call. 1995 14' Midland gravel pups, good tires ...........Call. 1983 14' Gravel Pup............................................Call.

ROLLERS/PACKERS/CRUSHING & PAVING (2) 1995 Ingersoll Rand 910T pavers, 4,400 hours, 10x16 screed ......................................... $15,000 Ea. (2) 2006 Ingersoll Rand SD25F, 42" padfoot and smooth drum..................................................... Call. 1998 Dynapac CA152D, 66" smooth drum, 2580 hrs, Cummins engine ............................................... Call. 2007 Terex 693T SuperTrak Screen Plant, 5' x 20', 3 deck ...............................................................Call. 2004 Terex Finlay 683 5 x 12, 2 deck screener......Call. 2007 Astec 4 x 7, 2 deck screenplant, 1,140 hrs, like new ...................................................................Call. 2003 Sakai SV500D Vib S/D Roller, 84" ............. Call.

TRUCKS

(2) 2013 Ford 750 S/A Water Trucks, front, rear, and side spray (NEW) ..............................................Call.

2001 Freightliner FL70, Berkley PTO pump... .........Call. 2003 Cat 735 Rock Truck, heated box, tailgates, A/C, E-steer, diff. lock ...............................................Call. 1999 IHC S/A 2000 Gal Water Truck, hyd. brakes ..Call. 1988 Ford Bucket Truck, 55' boom, 2 buckets, outriggers, 168,000 km ....................................Call.

MISCELLANEOUS 1981 P&H 40 Ton R/T Crane ........................$35,900. 1997 Bandit 90XP Woodchipper .........................Call. 2011 Sullair 225H Compressor, 1,300 hrs .........Call. 1998 Ford E350 4x4 Ambulance .........................Call. Skeleton buckets for skid steers .........................Call. 72" Dozer blade for skid steers ...........................Call. Rock grapple for skid steers ...............................Call. (6) 2009 Club Car Golf Carts, electric ............$2,100. Front Lift Groups for 140H-160H-140G Graders ....Call. 1999 Ford E450 Ambulance, 4x4 diesel ..............Call. 1999 Ford E450 Ambulance, 7.3 Ltr. 4x4 ....$12,900. 2001 Ford Cube Body Ambulance ................ Call. NEW 48" sweeper for Bobcat....................... Call. 1999 Ford E350 Ambulance, auto trans, power window, A/C, cruise ..........................................Call. Buckets for 980 & 966 C, F & G........................... Call. 644H John Deere Bucket ..................................... Call. Forks for 966C ...................................................... Call. 32" Dig Bucket CWS Q/C for John Deere 200...... Call. 48" Dig Bucket CWS Q/C ...................................... Call. 32" Lynn Pin on Hitachi 200 Size ........................ Call. Cat & John Deere Snow Wings .............................Call. Bucket 950K ........................................................Call.

HAVE UNDERBODY BLADES, GRAPPLES & BUCKETS, FRONT PLOWS

• MANY MORE PIECES OF EQUIPMENT IN THE YARD FOR SALE • FINANCING & RENTAL PURCHASE AVAILABLE

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 9

www.westconequip.ca Fax: 204-633-5805 380 Keewatin Street,Winnipeg, Mb

Manitoba’s Authorized volvo Construction Dealer

1-800-453-2435

EQUIPMENT FOR SALE

2006 volvo g960, 9,480 Hrs, Governmental Trade, Stock #98290. $112,000

2009 volvo g946, 6,760 Hrs, Governmental Trade, Stock #98259 $124,000

2008 john Deere 772D, 6,562 Hrs, No Snow Wing, Stock #98304 $153,000

2008 CAT 160M-B9E00220, 7,095 Hrs, Stock #98365 $160,000

2007 volvo g940, 8,152 Hrs, no wing, Stock #98374 $97,000

2008 volvo g960, 6,092 Hrs, Gov’t Trade, Stock #98433 $110,000

1995 volvo l50b, 16,319 Hrs, quick attach, S/N: L50BV9922 Stock #98412. $39,000

2006 volvo g960, 11,597 Hrs, No Wing, Stock #98327. $105,000

2008 volvo g970 , 8,544 Hrs, Tall Cab, Stock #98366. $122,000

2008 volvo g946, 8,411 Hrs, Governmental Trade, Stock #98286 $133,000

2008 volvo g946, 8,905 Hrs, Michelin X Sno Plus, Stock #98322 $140,000

2009 volvo g946, 8,251 Hrs, Stock #98434 $140,000

2005 volvo eC290b lC,12,771 Hrs, 48” Dig Bucket, 32” wide track, Diesel Coolant Heater, S/N: 13052 Stock #98266 $65,000

2008 volvo SD100D, 1,190 Hrs, Smooth Drum Compactor, S/N 197989 Stock #98355 $65,000

2013 volvo g946b, 2,235 Hrs, Stock #98424 $240,000

2007 john Deere 772D, 7,638 Hrs, Gov’t Owned - Well Maintained w/ Wing. Stock #98390 $113,000

2012 volvo g946b, 2,302 Hrs, Government Trade, Stock #98442. $163,000

2013 volvo g946b, 3,075 Hrs, Government Trade, Stock #98441 $174,000

2008 volvo SD100F 1,621 Hrs, Padfoot Compactor S/N 198059, Stock #198059 $60,000

Full Inventory online at www.westconequip.ca

2011 volvo g946, 5,569 Hrs, Excellent Gov’t Trade, Stock #98428 $150,000

Page 10

Supply Post Western Canada Edition · supplypost.com ATTACHMENT & GUARDING SPECIALISTS

FABRICATING LTD.

ADJUSTABLE UV BLADES

RIPPER SHANKS

HYDRAULIC W.L. COUPLERS

SNOW BUCKETS & PLOWS

ASK YOUR DEALER FOR

ATTACHMENTS

PHONE: 604-591-6184 WWW.ACCURATEFABRICATING.COM

September 2015

Doosan Extends St. Andrews Sponsorship For Five More Years St. Andrews, the “home of golf,” will be the first Open venue since the signing of the deal. A special exhibition area, designated the “Power & Water Station,” installed for the first time this year Doosan Chairman Yongmaan Park announced on July 12, 2015, that the company has signed a five-year extension with The Royal & Ancient Golf Club (The R&A) to continue its sponsorship for The Open Championship (also known as the British Open), one of the most prestigious tournaments in professional golf. By signing the deal, Doosan will continue to serve as an official patron of The Open until 2019. This year, the championship will be staged at the Old Course, St. Andrews, or the “home of golf.” Having the first championship held at St. Andrews after the five-year extension

tion booth will feature a large LED billboard to deliver Doosan’s brand stories and promote its business. Inside the exhibit, special areas will feature such experiences as an excavator simulator, virtual reality power plant simulator, a golf simulator and a photo zone. This year, in a special exhibition called the “Power & Water Station,” Doosan will promote its desalination and power plant businesses, with free bottled water and free cellphone charging stations that use Doosan’s fuel cells. Meanwhile, Doosan has invited four “KJ dream golfers” — junior golfers enrolled in the KJ Choi Foundation program — to The Open. The young golfers will be provided with free flights and accommodations as they get to appreciate The Open from up close. The Open, one of the four major championships in professional golf, has 154 years of history. From July 16 to 19, this year’s championship will be held at the Old Course in St. Andrews, Scotland. b

is especially meaningful for Doosan as it was also the championship venue in 2010, when Doosan signed the first sponsorship agreement. Doosan decided to renew the partnership agreement based on an analysis of the market, which indicated significant benefits from the original sponsorship. Repucom, an independent brand analysis and research agency, assessed the monetary value of the exposure achieved by Doosan’s on-site signage via worldwide television coverage at around $13 million (8.5 million pounds) every year. In an effort to actively promote the Doosan brand and businesses during the agreement period, Doosan will feature an array of promotional events, including exhibitions and a Doosanbranded bus operated outside This year at St. Andrews, the Doosan exhibi- Source: Doosan

CATERPILLAR PAYS YOU BACK WE’RE SO SURE OF WHAT YOU CAN DO WITH OUR NEW MACHINES, WE’RE PUTTING MONEY ON IT.

SPECIAL OFFER ON 100+ ELIGIBLE NEW CAT ® MACHINES NOW UNTIL DECEMBER 31, 2015

FUEL CONSUMPTION GUARANTEE

EMSOLUTIONS FLEET REPORTS

PARTS AVAILABILITY GUARANTEE

Your money back if your equipment’s fuel consumption rate exceeds the guaranteed fuel consumption rate.

Track machine and operator information to make data-driven decisions.

While you don’t always need your parts right away, when you do, more than 99 percent of Cat parts orders are on their way to you in 24 hours or less. And, if they don’t get there in 48 hours—shipping is FREE.

Visit cat.com/payback for all the details or talk to your local Finning sales representative today.

© 2015 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 11

Contact your local dealer:

Great West Equipment Vernon, BC (Head Office) 250.549.4232 Contact your local dealer: Campbell River, BC Dealer Name 250.286.0123 City, ST Cranbrook, BC 123.456.7890 250.426.6778 City, ST John, BC Fort St. 123.456.7890 250.785.4223 City, ST BC Kamloops, 123.456.7890 250.372.3996 City, ST BC Nanaimo, 123.456.7890 250.716.8804 City, STGeorge, BC Prince 123.456.7890 250.612.0255 City, STBC Surrey, 123.456.7890 604.882.5051 City, ST BC Terrace, 123.456.7890 250.635.9033 City, ST Lake, BC Williams 123.456.7890 250.392.9599 City, ST Whitehorse, YT 123.456.7890 778.870.6955

A close relationship withchoose your dealer Some companies have you power ormeans fuel efficiency. downtime won’t keep you up at night. You chose both.

S Smart Works. W . Only Volvo delivers on a true fuel efficiency guarantee so you never have to compromise on performance or productivity. And with CareTrack machine monitoring, you can focus your attention on more important things — like growing your business. Talk to us today, or get the details at volvoce.com/smartfuel.

DEALER LOGO

173-1230 GWE_smartfuel_MULTI_9.75x13.125_2.indd 1

1/15/15 8:51 PM

Page 12

Supply Post Western Canada Edition · supplypost.com

POLLARD EQUIPMENT CHILLIWACK LTD SHOP SERVICE

604-793-2287

FIELD SERVICE

Fully Trained Technicians

Emergency Repairs PM Service

BEAT TH HEATE !

COMPONENTS New & Reman Engines Transmissions Pumps Diffs Buckets

USED EQUIPMENT 2006 Cat D6R XM Series III • • • • •

16,093 hours, good shape Very recent System 1 U/C Multi shank ripper with 1 ripper A/C, heat, stereo, slope meter in cab 2 direction U-blade w/ manual angle

ASKING $98,900 The ‘ideal partner’ for your parts & repair needs

Affordable, Dependable Parts & Service at our shop or at your job site…you choose. Serving The Lower Mainland and Vancouver Island For Parts & Service call 604-793-2287

www.pollardequip.com

September 2015

Cummins Launches Global Logistics Hub In Singapore Cummins Inc. Opened its Global Logistics Hub in Singapore, one of the company’s eight master distribution centres for parts and filters globally. The Singapore Global Logistics Hub boasts a total investment of $5.4 million USD and is part of Cummins efforts to enhance its aftermarket product delivery globally. The Singapore Global Logistics Hub will serve markets including the United States, Europe, China, India as well as customers across the Northeast and Southeast Asia regions. Teo Ser Luck, Minister of State for Trade and Industry, graced the opening event at the CWT Pandan Logistics Centre. The Singapore Global Logistics Hub is a consolidation of operations from three distribution centres in Singapore. The Singapore Global Logistics Hub has a meticulously designed layout that aims to enhance op-

tive Director – Cummins Global Logistics, said, “The establishment of the Cummins Global Logistics Hub in Singapore is a reinforcement of our global master distribution hub strategy and a reflection of our commitment to customers. There are currently eight master distribution hubs in the world – Singapore, Mexico, Brazil, India, Belgium, China and two in the United States of America – supporting our international network and customers’ businesses that span over 190 countries and territories. Singapore is a worldclass global logistics hub with a strong advantage of being at the heart of Southeast Asia and sitting right across the major shipping lanes. Leveraging the global connectivity and strategic location of Singapore, Cummins will continue to enhance our capabilities in this part of the world to support the increasing needs of our customers.” The move was completed in two months with no impact or delays to its operations. b

erations safety. It boasts a three-tier mezzanine storage system with in-rack sprinklers to strengthen fire protection, a vehiclerestraint system and material-handling equipment with cameras and motion sensors, for added operations safety. Also, the warehouse adopts a bestin-class management system and barcode technology in a radio frequency (RF) environment, to control and optimize material flow. With an increase in the facility’s height and introduction of a smartslotting strategy, space utilization is boosted by 30 percent. The new features of the facility are in line with Cummins commitment to provide its employees with safe working environments. With the new facility, Cummins will see a 20 percent boost in productivity, faster order fulfilment time and operation cost savings. Doug Sunkel, Execu- Source: AED

EQUIPMENT IN STOCK BC ONLY

CRUSHERS • SCREENERS • TROMMELS • STACKERS

EQUIPMENT DESIGNED & BUILT FOR THE 21ST CENTURY VERNON, B.C. 8140 Becketts Rd.

PH: (250) 542-7350 FAX: (250) 542-0571

CALGARY, ALBERTA 8815 44th St. SE

PH: (403) 203-2644 FAX: (403) 203-2646

www.mormak.com

CHILLIWACK, B.C. 7912 Atchelitz Rd.

PH: (604) 795-7511 FAX: (604) 795-7501

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

THE NEW KUBOTA R-SERIES

CHANGING THE BALANCE OF POWER

Inside and out, Kubota has again re-defined performance, luxury and power with its new R-Series wheel loaders. Whether your operation demands maximum power for stockpiling, efficiency for lift and place work or utility for attachment usage, our 2 new models deliver the right feature for every loading job you do. The R-Series Hybrid Link System keeps your load upright and steady, even while raising or lowering the lift arms. And for greater stability and more comfort on rough terrain, a unique centre-type joint allows for 8° of frame oscillation and 40° of articulation in either direction. Visit your nearest Kubota dealer to find out how the new R-Series will help you make your workload easier and more efficient than all others.

Page 13

Page 14

Supply Post Western Canada Edition · supplypost.com

Strong 2015 Edition Cements CNRE As The Show For Northern Canada’s Resources Sectors Staff and management of the Canada North Resources Expo (CNRE), along with members of the Resources Expo Society and CNRE steering committee are thrilled to report that the 2015 edition of the show was a huge success. The event, which takes place biennially, was held May 29th and 30th at the

CN Centre in Prince George and welcomed 8,451 visitors, an increase over 2013 attendance numbers. This year’s edition also featured 30% more outdoor exhibit space than the first edition, showing even more of the forestry, heavy construction and project infrastructure equipment needed to get the big jobs done. “Visitors representing

Northern Canada’s varied resources sectors came out in droves to check out the big iron and live equipment demos,” said Mark Cusack, National Show Manager. “We’ve been hearing great feedback from visitors and exhibitors alike.” The 2015 edition of the show included a wide range of exciting features, including the first annual

Northern BC Safety Conference, a Live Equipment Demo Zone, Bobby & Lori Goodson, stars of the Discovery Channel’s hit reality show “Swamp Loggers”, a Health, Wellness & Safety Zone, a Future of the Industry Day, and a Pancake Breakfast in support of Big Brothers Big Sisters Prince George. CNRE is produced in partnership with the Resources Expo Society, a not-for-profit organization whose mandate is to facilitate training and educational opportunities

September 2015 in the central and northern BC resources sectors. Funding from the show helps the society achieve its objectives, including the establishment of a legacy scholarship and bursary program at the College of New Caledona, the establishment of a legacy fund with the Prince George Community Foundation, and support for local heavy equipment operation training programs. The Resources Expo Society also helps organize fun events during CNRE – like the pancake breakfast

– with proceeds going to local not-for-profit organizations. The Canada North Resources Expo will return in May 2017 and the show’s management, staff and steering committee are already discussing how to continue growing the show with more exhibitors, more visitors and more equipment! Stay tuned to www. CNRE.ca for the most upto-date information on the show. b Source: Master Promotions Ltd.

Attachments & More MACHINERY SALES & RENTALS • KELOWNA, B.C. PHONE: 250-769-5454 • FAX: 250-769-5005 continentalequipment.ca

IN STOCK:

STO RENT CK ✓ A SERV LS ✓ EXPE ICE ✓ RTI SE ✓

 Filters  Cutting Edges  Bucket Teeth  Equipment Attachments  OTR Loader & Rock Truck Tires

MB Crushin it

Wall - Dust-GONE

2002 Cat 980G Loader, 40% 29.5 x 25 Tires, GP Bucket w/BOE $79,900 USEd EqUIPMENT & MACHINERY 2013 Hitachi ZX135USBL-3 – ARRIVING SOON ...................................POR 2012 Hitachi ZX50U-3, Currently on rent.........................................POR

Demolish!

V-Series Hammer

b? Small Jo ! NO PROB

WE’VE GOT YOU COVERED!

2012 Hitachi ZX35U-3, 700 hrs ................................................ $49,900 2006 CAT D6N XL, 30% U/C, EROPS w/air, ripper valve, PAT dozer, diff steer, 8,475 hrs ...................................................... REDUCED $64,500 2001 CAT D6R XW, EROPS w/air, Winch, PAT Dozer, New U/C, 9800 hrs ... .............................................................................REDUCED $99,900 2007 Hitachi ZX270LC c/w Dig & C/U Bkt, A/C, Long Stick, Exc. U/C, Reblt Pump ...................................................................................$92,900 2010 Deere 200D, c/w Q/C, Dig Bkt 3,890 Hrs. .........................$132,900 2006 Hitachi ZX240LC-3, c/w 7,800 hrs, 2 bkts, Q/C, aux. hyd, near new U/C, long stick.......................................................................$89,900

REdUCEd (6) 2005 - 2007 Deere 350D Articulated End Dumps, 5100 - 8600 hrs. .... ......................................................................... $107,000 - $137,000 2005 Deere D400D Articulated End Dump, 6,700 hrs. ..............$102,500

Grapples

2005 Hitachi ZX225US Excavator, c/w 6,700 hrs, hyd. thumb, Q/C, 2 buckets ................................................................................$75,000

Rammer Hammer

Customers Come For The Attachments And Stay For The Company! 1-877-255-9293

ATTACHMENTS

Keepin g it Rodeo cool 2015

604-888-9020

vanedequipment.com

Cat 966D/E/F Skeleton Bucket.................................................. $5,000 Loader Tires 17.5 x 25 - 29.54 x 25..................................................POR 12 Ton - 20 Ton Wrist Buckets....................................... Starting at $3,900 CWS Dig Bucket to fit ZX200 size ...............................................$3,500 CWS 66" 30 Ton Clean-Up Bucket ............................................. $3,000 FAS 58" Clean-Up Bucket ......................................................... $3,000 Excavator Q/A Pin Grabber & Wedge Style 12T Destec Ears Daequip Rake ...................................................................................... $2,750 8 Ft x 24 Ft Shoring Cage.............................................................. $9,500 Rome HD Industrial Breaking Discs ................................................$7,500

Call us at: 1-800-663-5454

September 2015

Supply Post Western Canada Edition 路 Our Readers Are Your Buyers

www.liugongna.com T O U G H W O R L D . T O U G H E Q U I P M E N T. We make one of the broadest lines of construction, mining, road building, road clearing and material handling equipment in the world. LiuGong knows what

EVERY JOB. EVERYWHERE.

you need and why you need it, with unmatched value,

Surrey | 17924 56th Ave (Hwy 10), Surrey, BC V3S 1C7 Kamloops | 706 Carrier Road, Kamloops, BC V2H 1G2 Quesnel | 3650 Highway 97 N Quesenal, BC V2J 5Z1

and modern design, all backed by top-notch warranty,

1- 855-355-0109 www.douglaslakeequipment.com

training, parts and service support. Contact your local

Southern Ontario | 48 Ardelt Avenue, Kitchener, ON N2C 2C9

dealer today for more information.

Page 15

1-519-572-9447 www.fieldworksequipment.com Blackfalds (Red Deer) | 5424 Blackfalds Industrial Way, Blackfalds, AB T0M 0J0 Calgary | 5735 53 Street SE, Calgary, AB T2C 4V1 Clairmont (Grande Prairie) | 9502-102 Street, Clairmont, AB T8X 0M6 Edmonton (Head Quarters) | #30, 26313 Township Rd 531A, Acheson, AB T7X 5A3 Edmonton | 17604 105 Avenue, Edmonton, AB T5S 1G4 Fort MacKay | Lot 18, Caribou Energy Park, Fort MacKay AB T0P 1C0 Fort McMurray | 255 MacAlpine Crescent, Fort McMurray, AB T9H 4A5 1-877-469-2529 www.wajaxequipment.com

North American Headquarters | 22220 Merchants Way Suite 100, Katy, TX 77449 | 281.579.8882

Page 16

Supply Post Western Canada Edition · supplypost.com

139,000

2008 JD 870D 7,446 HRS BAREBACK

180,000

2009 JD 772D 6,014 HRS BAREBACK, LOW CAB

139,000

2008 JD 870D 7,199 HRS LOW CAB, CRAIG WING

149,000

2009 JD 870D 7,361 HRS TALL CAB, CRAIG WING

178,000

2010 JD 770G 4,305 HRS 2FT EXT, SNOPLS TIRES, BAREBACK

199,000

2011 JD 770G 5,189 HRS LOW CAB, BARE BACK, WTY

139,000

2008 JD 870D 8,174 HRS LOW CAB, S.WING, FENDERS

189,000

2010 JD 870G 5,201 HRS BAREBACK, HEAT, AC, F& R FENDERS, BLOCK

169,000

2010 JD 770G 6,281 HRS LOW CAB, BAREBACK

178,000

2008 CAT 140M 8,609 HRS SNOW WING

215,000

2009 JD 870G 7,108 HRS BAREBACK, 2’ EXT, F&R FENDERS

315,000

2013 JD 772G 2,712 HRS 14FT MLDBRD, AUTOSHIFT, 6 WHEEL

238,000

2010 JD 872GP 6,372 HRS C/W V-PLOW, WING, ONE WAY PLOW

278,000

2013 JD 772G 3,616 HRS A-SHIFT TRANS, 7+7 CTRL VALVE, S-PLOW LIGHTS

225,000

2010 JD 872G 6,593 HRS 7+7 CTRL VLV, AUTO SHIFT TRANS

September 2015

205,000

2011 JD 770G 4,922 HRS LOW CAB, BAREBACK

315,000

2013 JD 772G 2,385 HRS 14FT MLDBRD, AUTOSHIFT, 6 WHEEL

195,000

2011 JD 770G 4,648 HRS GOOD CONDITION

278,000

2013 JD 772G 3,655 HRS A-SHIFT TRANS, 7+7 CTRL VALVE, S-PLOW LIGHTS

115,000

2003 CAT 160H 12,400 HRSCAB, AC, WING

Call Brandt Finance at 1-855-711-4545 to find out more about our customized, flexible financing options.

Used Equipment Clearance 1-888-227-2638 | sales@brandt.ca | www.brandtused.ca

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

363,000

2011 JD 872GP 4,013 HRS CAB AC, LOW CAB, EH CONTROLS

299,000

2012 JD 872G 4,381 HRS RIPPER, LOW CAB, 2’ EXT

245,000

2010 JD 772G 4,976 HRS 6WD, AUTOSHIFT

225,000

2010 JD 872G 6,800 HRS A-SHIFT TRANS, 7+7 CTRL VALVE, S-PLOW LIGHTS

185,000

2008 CAT 140M AWD 7,554 HRS 1 WAY PLOW, WING, X MUNIPAL

228,000

2011 JD 772G 6,170 HRS BES WING

199,000

2010 JD 770GP 5,348 HRS GP, BAREBACK, 14’+2’EXT, F/R FDR

255,000

2012 JD 772G 4,485 HRS 6WD, SNOW TIRES

235,000

2011 JD 872G 6,267 HRS A-SHIFT TRANS, 7+7 CTRL VALVE, S-PLOW LIGHTS

107,000

2007 JD 772D 12,950 HRS SNOW WING

Page 17

2011 JD 400D BIN HEATER, 25.9R25 6,253 HRS

$259,000

2012 JD 400D BIN HEATER, 29.5R25 3,904 HRS

$389,000

2012 JD 400D AC, HEATED BOX, 29.5R25 RUBBER AT 80% 6,649 HRS

$319,000

1996 CASE 580L GOV TRADE, 2WD, EXTAHOE

$21,000

2007 CASE 590SM II SERIES 2, 4WD, EXT-A-HOE, POS AIR 4,131 HRS

$50,000

2005 JD 310SG RBLT ENG, 4X4 EXT 7,000 HRS

$43,000

2008 JD 310SJ 4N1 BKT, EXT HOE, RC, AC 5,949 HRS

$65,000

2008 JD 310SJ 6 FUNC, CAB, HEAT, AC, 24”DIG 7,555 HRS

$52,000

2011 JD 310SJ 4X4 EXTEND A HOE 5,669 HRS

$65,000

2014 JD 310SK 4X4, 4IN1 LDR BKT, PTH WARRANTY 1,950 HRS

$109,000

2007 JD 310TJ TMC, 4X4, EXT, 3FN, 4N1, RC, DIG, CU 5,290 HRS

$60,000

2011 JD 310TJ TC, TMC, 4IN1 BKT, RC, BKTS 4,828 HRS

$75,000

1997 JD 410E 2 BKTS, NEW REAR DIFFERENTIAL 9,772 HRS

$22,000

2006 JD 410G 4X4, EXTENDAHOE, PILOTS, AUX HYD 4,798 HRS

$57,000

2007 JD 410J CAB, EXT, 6FN, PILOT, RC, QC, DIG, MP BKT 5,755 HRS

$59,000

2005 JD 710G 2YD LDR BKT, 30” DIG BKT 5,007 HRS

$70,000

2007 MISC 960 ASTEC VIB PLOW, BACKHOE 9,542 HRS

$22,000

2007 CAT D8H 2 BLDS, 26” TRK, RIPPER, FOPS 11,685 HRS

$250,000

1992 CAT D8N RIPPER, SEMI-U-BLADE, GRDING 9,112 HRS

$135,000

2008 JD 450J LGP WINCH, REAR SCREEN, PAT BLD 2,431 HRS

$125,000

2013 JD 650J BES FULL GUARDING, BLADE 1,472 HRS

$185,000

2015 JD 700K WINCH, ESPAR, EXT WARR, 11 HRS

$250,000

2015 JD 700K WINCH, ESPAR, EXT WARR, 11 HRS

$250,000

2008 JD 750J AC, RADIO, CAB LIGHTS 6,275 HRS

$139,000

2012 JD 750J RIPPER, BLADE EXT. 2,800 HRS

$205,000

2012 JD 750J 156”-6 WAY BLADE, 34” TRACK SHOES 1,698 HRS

$210,000

2009 JD 850J RIPPER, GUARD, ESPAR, POS AIR 5,629 HRS

$199,000

2009 JD 850J W/CAB, AC, 6 WAY BLADE 4,404 HRS

$225,000

2010 JD 850J 30” PADS,176”BLADE 5,745 HRS

$209,000

2011 JD 850J GUARDING, RIPPER, NEW U/C 6,601 HRS

$239,000

2012 CASE 160 PLUMBED, DIG, TWIST, CLEAN 2,505 HRS

$130,000

2009 CASE CX800 C/W PIN-ON BKT 6,675 HRS

$259,000

2007 CAT 308 BLADE, THUMB, AUX HYD, 2 BKTS 4,058 HRS

$69,000

2012 CAT 319DL W/2 BKTS, THUMB, CATWALKS 5,026 HRS

$155,000

1998 HIT 160LC-5 HEAT, AC, DITCH BKT, COUPLER 9,655 HRS

$70,000

1994 HIT 200LC-2 PIN ON CU BKT 9,139 HRS

$49,000

2006 HIT ZX350LC Q/C, BDG48, PAS, WALKS, AUX PLMG 10,546 HRS

$75,000

2011 JD 160DLC Q/C, 2 BKTS, THUMB 3,600 HRS

$120,000

2013 JD 160GLC HYDRAULIC EXCAVATOR W.CAB, A/C 2,864 HRS

$146,000

2006 JD 200CLC MAN Q/C, DIG, CLEAN, THUMB 7,000 HRS

$75,000

2007 JD 200D 28” TRIPLE GROUSER 7,754 HRS

$95,000

1998 JD 200LC HYD THUMB 10,147 HRS

$36,000

2014 JD 210G AUX PLUMB, ESPAR, EXT WARR 13 HRS

$250,000

2006 JD 240 2 BKTS, THUMB 10,275 HRS

$150,000

2006 JD 240D HQA, DIG, CLEAN, THUMB 7,940 HRS

Call Brandt Finance at 1-855-711-4545 to find out more about our customized, flexible financing options.

$83,000

Page 18

Supply Post Western Canada Edition · supplypost.com

QUALITY USED EQUIPMENT! 2013 70ZV-2 KAWASAKI, 910 hrs, 3.5 yrd bkt, forks, jib, coupler, ride control, aux hydraulics, 20.5R25 L3, joystick, heated mirror, HID lights, ride control, limited slip diﬀ, warranty. ................ $176,900 2013 ED160 KOBELCO, 1,060 hrs, 24" dig, 54" clean up, 6 way dozer blade, aux hyd, 23.6 curved shoe, 9'4" arm, air, heated seat, pattern changer, work lights, warranty. .... ....................................... $186,900 SASKATCHEWAN LOCATIONS Saskatoon (306) 934-4686 306-228-2686 Calgary, AB: 403-295-7824 Kindersley, SK: 306-463-2335 Unity, SK: Phone: ALBERTA LOCATION Kindersley Saskatoon, SK: 306-934-4686 High River, AB: 403-652-1410 Lloydminster, SK: 306-825-6141 291250 Wagon Wheel Road (306) 463-2335 Olds, AB: (Calgary), 403-556-3939 Balzac AlbertaPerdue, T0M SK: 0E0 306-237-4272 Acheson (Edmonton), AB: 780-960-8945 Lloydminster (403) 295-7824 (306) 825-6141 Opening 2013 — Edmonton, Alberta (403) 803-2657 www.moodysequipment.com

www.moodysequipment.com

BUY OR LEASE A WHEEL LOADER TODAY!

September 2015

Shell To Sell Stake In Tongyi Lubricants Shell has signed an agreement to sell its 75% stake in Tongyi Lubricants in China to Huo’s Group and The Carlyle Group. The transaction is expected to complete by late 2015 or early 2016, subject to regulatory approvals. Tongyi, a joint venture between Shell and Huo’s Group, is a prominent Chinese lubricant supplier with blending plants in Beijing, Xianyang of Shaanxi province and Wuxi of Jiangsu province. Shell acquired its 75% stake from Huo’s Group

ing plant in Tianjin with the capacity to produce 330 million litres of finished lubricants per year, enough to fill more than 65 million cars. Other recent Downstream divestments include the sale of Downstream businesses in Australia and Italy; a number of retail sites in the UK, and the initial public offering of, and further drop downs to, Shell Midstream Partners L.P. Shell has also agreed the sale of its marketing business in Denmark and Norway and its LPG businesses in France. In July 2015, Shell announced the sale of its shareholding in Showa Shell in Japan to Idemitsu. b

in 2006. The sale is consistent with Shell’s strategy to concentrate its Downstream footprint on a smaller number of assets and markets where it can be most competitive. Shell is committed to growing its lubricants business in China through strong relationships with distributors, collaboration with key vehicle and equipment manufacturers, and the sale of premium products across all sectors. In June 2015, Shell opened a new lubricants blend- Source: Oil & Gas Press

ForesTech equipmenT Your Source for Pre-owned Logging equiPment

2014 85Z7 KAWASAKI 4.5 yrd GP bucket, coupler, ride control, joystick, aux. hydraulics, 23.5R25 L3, limited slip axles, 47 hrs.

2013 Caterpillar 980K SMU: 2,578 c/w: WGM grapple, 29.5X25 tires, ROPS cab, joystick controls, back up camera, forestry guarding package ........... $544,500

85Z7 - $319,993 $4298/MONTH

2014 90Z7 KAWASAKI

5.5 yrd GP bucket, ride control, 2 lever, aux. hydraulics, LED lights, 26.5R25 L3, limited slip axles, 382 hrs.

90Z7 - $339,993 $4953/MONTH

Yarders Cypress 7280B Swing Yarder, c/w: Grapple, lines, 70' boom, cab, Cummins eng., T-Mar screw comp. update, 45' gantry, 2 guy lines, mounted on Cypress hyd. drive carrier w/ 32" DBP.............................................................. $524,500

2004 John Deere 3554, c/w: Dig bkt, CU bkt, grapple and heel rack, hyd. Q/C, hyd. thumb, hoe front, forestry cab on 8” riser, forestry guarding package w/ aux. fuel tank, high walker undercarriage with new 28” DBP. Recent work orders. .................................................................... $109,500

log loaders

1999 Kobelco SK400MkIVRB, c/w: Dig bkt, Q/C, hyd. thumb, hoe front, Cummins engine, forestry guarding pkg w/ aux. fuel tank, high walker U/C with 30” TBP. .... $59,500

2004 John Deere 3554, c/w: PMW grapple, heel rack, LL front, elevated rear entry cab, forestry guarding package w/ aux. fuel tank, highwalker undercarriage w/ 28” DBP .................................................................................. $59,500 1997 Caterpillar 325BLL Power Clam, c/w: IMAC power clam grapple, LL front, elevated rear entry cab, forestry guarding package w/ aux. fuel tank, high walker undercarriage with 28” DBP. .................................... $42,500

processors 1999 John Deere 330LC, c/w: 1999 Waratah HTH24 processing head w/ top saw, thumbnail rollers, butt saw, LL front, elevated rear entry cab, forestry guarding package, highwalker undercarriage w/ 30” pads ...................................................... Price reduced to $74,500

hYdraulic excavators

2013 95Z7 KAWASAKI

7.3 yrd GP/tooth bucket, ride control, 2 lever, joystick steer, LED lights, Michelin 29.5R25 L3, limited slip axles, 665 hrs.

95Z7 - $409,990 $6131/MONTH

2012 Volvo FC2924C, c/w: Two bkts, Rotobec grapple and heel rack, Q/C, hyd. thumb, hoe front, elevated rear entry cab, forestry guarding package, highwalker U/C w/28" DBP, 3,XXX hours, new U/C. ................................................. CALL

1997 Komatsu PC150LC-6K, c/w: Two bkts, Q/C, hyd. thumb, aux. hyd., hoe front, cab guard, catwalks, 28” triple bar pads. 13,896 hours. .......................................... $22,500

SOL

feller bunchers 2002 Madill 3200C, c/w: Koehring felling head w/15 degree tilt, ROPS cab, Series 50 eng., high walker carrier w/ 28” SBP ........................................................................... $29,500 craWler tractors 1989 Cat D4C, c/w: 6 way dozer, sweeps, ROPS canopy, screens, winch, 16 SBP. .......................................... $18,500 service trucks 2009 GMC C5500 4X4 Service Truck, 57,736 km / 3,606 hours c/w: Duramax diesel, auto, IMT service body, IMT compressor (576.2 hrs), IMT 5,000 lb crane w/ outriggers (23.6 hrs), Miller Trailblazer 302 welder. Extremely clean unit! .......................................................................... $77,500 log trucks Hayes HDX T/A Log Truck & Trailer, c/w: Cat 3406, 18 speed, spring susp., Clark #91,000 rears, 14’ bunk, Hayes T/A pole trailer. ......................................................... $59,500 marine sorting equipment 13’ West Coast Sidewinder, c/w: 4-53, Olympic drive, half cab, T/A trailer. ......................................................... $35,000

SASKATCHEWAN LOCATIONS

www.moodysequipment.com

Saskatoon (306) 934-4686 306-228-2686 Calgary, AB:ALBERTA 403-295-7824 Kindersley, SK: 306-463-2335 Unity, SK: Phone: LOCATION Kindersley Saskatoon, SK: 306-934-4686 High River, AB: 403-652-1410 Lloydminster, SK: 306-825-6141 291250 Wagon Wheel Road (306) 463-2335 Olds, AB: (Calgary), 403-556-3939 Perdue, Balzac Alberta T0MSK: 0E0 306-237-4272 Acheson (Edmonton), AB: 780-960-8945 Lloydminster (403) 295-7824 (306) 825-6141 Opening 2013 — Edmonton, Alberta (403) 803-2657 www.moodysequipment.com

2005 Volvo EC210BF, c/w: Two bkts, Rotobec power clam, Q/C, hyd. thumb, aux. hyd., hoe front, forestry guarding package, highwalker undercarriage w/ 28” DBP. Parts machine included in package. Call for details........... $97,500 2001 Hitachi EX330LC-5, c/w: Dig bkt, hyd Q/C, hydraulic thumb, aux. hyd., hoe front w/ high lift kit, forestry guarding package w/ aux. fuel tank, 28” DBP.......................... $37,500

misc. trucks Hayes HDX T/A Truck & Columbia DAM100 T/A Lowbed, c/w: 12V71, Allison 5960 trans., spring susp., Clark #91,000 rear planetary axles, 14:00X25 tires, log bunk hitch, 12’ W X 22’ L deck, 8 wheel susp., KB axles, Dayton wheels, 14:00X25 tires ............................................................... CALL Pacific P510 T/A Truck & Columbia T/A Lowbed, c/w: Cat 3406, 15 speed, RB susp., 11R24.5 tires, fifth wheel hitch, wide neck, 18’6’L X 8’6” W deck, WB susp., Bud wheels, 10:00X20 tires. ......................................................... $27,500 1978 Kenworth T800 T/A Dump Truck, c/w: Cummins eng., 15 spd, spring over WB susp., 16'6" dump box........ $9,500.

4335 barge Terminal rd. campbell riVer, bc

VisiT our websiTe For our Full inVenTory: www.ForesTech.ca

ContaCt: tim LLoyd 250-703-3551

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

TIRED OF

GUESSING

Page 19

START

SCANNING TA K E O U T T H E

GUESSWORK ...by simply driving through for accurate load measurement. Eliminate operator error and inaccuracies to ensure your client receives their full order and you’re not giving away material. You can even measure haul-backs to be removed from the load data. Don’t give your material away, know your load. Available in portable, semiportable and fixed models to suit your application or location.

WATCH IT IN

ACTION RENTALS | NEW & USED EQUIPMENT SALES

OUR BRANDS:

TOLL FREE: 1(855)625-2009 EMAIL: INFO@FL-MACHINERY.COM VISIT US ONLINE: FRONTLINE-MACHINERY.COM

Page 20

Supply Post Western Canada Edition · supplypost.com

FTS CHASSIS · MOROOKA DUMPERS & PARTS

604-850-3601 ext. 226 Henry: (604) 850-4654

COMPETITIVE PRICING! CUSTOM CHASSIS

Sizes from 5–11 ton · 5' – 8' wide

We custom build FTS Chassis to fit any criteria for mounting engines, pumps, most drills, rock slingers, water bombies and more. Give us a call and we will design your new rubber track carrier chassis!

DUMPERS We sell all sizes of Dumpers, new or used from 5000 lb capacity all the way up to 22,000 lb payloads. We also rent by day, week or month. Please visit our website for rental rates and complete list with prices.

MOROOKA PARTS Morooka Parts for every model from manuals to tracks. We also rebuild pumps and drives in our shop. Give us a call for any part you need!

www.handlersequipment.com

CALL FOR DETAILS

Doosan Holds Global Business Forum 2015 In Edinburgh Among the attendees were Gordon Brown, former British Prime Minister; Gene Sperling, former Director of the U.S. National Economic Council (NEC); Justin Yifu Lin, former Senior Vice President of the World Bank; Shri Rajiv Mehrishi, Secretary of the Ministry of Finance, India; and Amitabh Kant, Secretary of the Ministry of Commerce and Industry, India. Former Prime Minister of the United Kingdom Gordon Brown assessed geopolitical risks in his special remarks. Future global economic prospects were presented by former NEC Director Gene Sperling and former World Bank Senior Vice President Justin Yifu Lin. A special session held on the topic of India’s economy, was attended by Secretary of the Ministry of Finance and Secretary of the Ministry of Commerce and Industry. Prominent speakers in-

TF: 1-888-905-7821

www.majorequipsales.com

WE HAVE OVER 100 MACHINES, TRUCKS, ATTACHMENTS, AND TRAILERS ON OUR WEBSITE!

$75,000

2011 KUBOTA U55

2004 HITACHI ZX110

Excellent Condition, 90% Rubber Tracks, Hydraulic Thumb, Hi-Flo Aux. Hydraulics, 2 Buckets, Q/A, 2 Spd Travel, 4 Way Blade, Pattern Control, Heat, A/C, Radio, Block Heater. Recent Complete Service. 347 Hrs.

Excellent Condition, 70% U/C, Cab Guard, Cat Walks, Hydraulic Thumb, Q/A, 2 Buckets, Pattern Control, Heat, A/C, Tight, No Issues, 5,800 Hrs.

$70,000

SUPPLYING ALL COMPONENTS FOR ALL MACHINES! CAT, HITACHI, JOHN DEERE, KOMATSU, VOLVO, BOBCAT, ENGINES, TRANSMISSIONS, FINAL DRIVES, ELECTRICAL & HYDRAULICS... 2004 DEERE 903G

2004 PETERBILT 378

Good Condition, 40% U/C, Newer Engine, Gilbert 22" Hot Saw, Heat, A/C, Stereo, Tight, No Issues, Spare Parts, 14,411 Hrs.

Excellent Condition, 70% Rubber, Certified, Double Frame, c/w Nahanni 16'6" Gravel Box, Hi-Lift Gate, Air Tarp, Wet Kit, Tight, No Issues, Diff Lock, Dual Breathers/Exhaust, Pwr Steer, A/C, Pwr Locks/ Windows, 643,738 km.

$50,000 WAYNE GILES: 250-691-1650 wayne@majorequipsales.com

September 2015

$75,000

ASHLEY RONEY: 250-845-9169 ashley@majorequipsales.com

hydrogen fuel cell power in the future energy mix and overall industrial prospects. This year’s Forum featured a special session on the Indian economy. Shri Rajiv Mehrishi, Secretary of the Ministry of Finance, India, addressed the topic of India’s economic growth and economic policy reforms. Amitabh Kant, Secretary of the Ministry of Commerce and Industry, India, who spearheads the “Make in India” manufacturing initiatives, explained the program’s key points, including infrastructure construction plans, smart city projects and energy policies. Founded in 2012, the Doosan Global Business Forum has become an annual event where global leaders, prominent economists, CEOs of global enterprises gather to gain valuable insights into the world economy as well as the latest technology innovation trends. Previous participants include leading politicians like Tony Blair, former Prime Minister of the United Kingdom; Lawrence H. Summers, former U.S. Secretary of the Treasury; Condoleezza Rice, former U.S. Secretary of State; and Angel Gurria, Secretary-General of the Organization for Economic Cooperation and Development (OECD), as well as leading economists, including Paul Krugman, professor at Princeton University; Robert Shiller, professor at Yale University; and Kenneth Rogoff, professor at Harvard University. Some of the noted presenters also include JB Straubel, CTO of Tesla Motors, a leading electric vehicle manufacturer, and Professor Daniela Rus, Director of the MIT Computer Science and Artificial Intelligence Laboratory. Not far from the forum venue, The Open Championship was held on the Old Course at St. Andrews from July 16 to 19. Doosan is an official patron of the event. * “Hydrogen economy” refers to the potential for hydrogen to replace fossil fuels as the main source of energy supplied and consumed in the future. b

cluded Joan Ogden, Professor at the University of California, Davis, and a specialist in the economics of hydrogen and alternative energy technology; and Gita Gopinath, Professor of Economics at Harvard University. Each presentation was followed by a Q&A session with more than 50 guests, comprising representatives of preeminent Infrastructure Support Business companies, leaders in the energy industry and CEOs of worldclass financial groups from around the world. In his opening and closing remarks, while citing an Indian proverb, “We cannot change the direction of the wind, but we can adjust the sails,” and John F. Kennedy’s famous saying “Efforts and courage are not enough without purpose and direction,” Doosan Group Chairman Yongmaan Park expressed his hope that “this discussion help us identify what is ahead of us and how we should respond to the changing environment.” Former Prime Minister Gordon Brown delivered special remarks on global geopolitical risks and their impact on the global economy. In the first session on the Global Business Environment, Gene Sperling, Director of the NEC and former Assistant to the President for Economic Policy, shared his views on the short- and longterm economic trends of the United States and other developed nations. Justin Yifu Lin, former Senior Vice President of the World Bank and influential policy specialist on China, offered insightful perspectives on the current status and future trends of the Chinese economy, pointing out the reasons for China’s slower growth, and internal and external variables that can affect China’s future economy. In the following session, Joan Ogden, Professor at the University of California, Davis, offered her insights into the transformative rise of the hydrogen economy*, predicting a growing share of Source: Two-Rivers

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

• NO TIME LIMIT POWER BOOST • INDUSTRY-LEADING SAFETY FEATURES • EXCLUSIVE INDEPENDENT TRAVEL • BEST-IN-CLASS FUEL ECONOMY

WE’VE GOT EXCLUSIVE FEATURES TO GET MORE DONE With KOBELCO excavators on the job, youʼll be prepared for even the toughest worksite challenges. Thatʼs because weʼre committed to building productivity-boosting features in our machines you wonʼt ﬁnd anywhere else. While other machines may offer power boost, ours is untimed and operator-controlled. Then thereʼs the exclusive independent travel feature that lets you dig, lift and travel at the same time. We even thought of the little things, like swing ﬂashers and industry-leading visibility that enhance safety. Plus with premier operator comforts, you might actually enjoy operating our machines.

MINI

SHORT RADIUS KOBELCO-USA.COM

CONVENTIONAL

Page 21

Page 22

Supply Post Western Canada Edition · supplypost.com

September 2015

Takeuchi Introduces The TS80 Skid Steer To Their Lineup

2001 CHAMPION 720A, STK E1725 ...... CALL FOR PRICE

WARRANTY

1994 CHAMPION 740A C/W WING, GOOD RUBBER. .. ........................................................................$38,500

WARRANTY

2006 VOLVO G970, STK C90 ............. $3,200/MONTH**

2008 VOLVO G940 ............................ $3,200/MONTH**

2012 JD 624K, STK 1487..................................$165,600

1996 CHAMPION 780A, STK E001330 .............. $64,500

f $2

2005 VOLVO 740B, STK C70 ........................... $98,500

Toll Free:

1-800-663-0715

EMPLOYMENT OPPORTUNITIES

ROT 0˚

ION AT

a ny u s e d p a r ts o rd e r o

T I LT R O TAT O R S

±4

w ith

o 500

Takeuchi TS80R2 Skid Steer The TS80R2 features an operating weight of 7,950 lbs. and a rated operating capacity of 2,825 lbs. The bucket breakout force on the TS80R2 is 5,845 lbs., with a lift arm force of 7,080 lbs. and a maximum hinge pin height of 10 ft. 5 in. Takeuchi TS80V2 Skid Steer The TS80V2 is heavier than its radial counterpart with an operating weight of 8,965 lbs. and a rated operating capacity of 3,500 lbs. Bucket breakout force on the vertical model is 5,920 lbs., with a lift arm force of 6,200 lbs., and a maximum Source: Takeuchi hinge pin height of 10 ft. 10 in. Comfortable to operate, the TS80 skid steers feature a functional and well-equipped operator’s station that now includes a lower threshold for easier entry and exit for the operator. Several new options are now available

PARTS • SALES • SERVICE • RENTALS

Takeuchi-US, an innovative global leader in compact equipment has recently updated their product offering with the introduction of the allnew TS80 skid steer loaders that are available in both radial and vertical loader arrangements. The TS80 series are the largest models in the Takeuchi skid steer product line that also includes the TS50 and TS60. Highly maneuverable and powerful, the large frame TS80 series loaders deliver an outstanding blend of performance, durability, and operator comfort. The new TS80 skid steer loaders feature a 74 hp Final Tier 4 Deutz engine that delivers an impressive 192 ft. lb. of torque at 1,800 rpm. A key benefit of the new Deutz engine is its simple maintenance free Diesel Oxidation Catalyst (DOC) that does not require regeneration, cleaning, or Diesel Exhaust Fluid (DEF).

and include ride control, bucket positioning, and high-flow auxiliary hydraulics to increase both productivity and versatility. “We are very excited and proud to introduce the new TS80 skid steers to the market because of the machines’ excellent operating capacity and hydraulic performance — the features that make them so powerful and reliable out on the jobsite,” said David Steger, product manager at Takeuchi-US. “Uptime has been improved with these machines, and daily maintenance points like fluid level checks and greasing access have been improved and simplified as well. These are great machines that will not only meet the operator’s needs, but surpass them.” b

˚ T I LT

JADE EQUIPMENT is presently looking for Shop & Field Mechanics for our Edmonton Branch. Please forward your resume to: admin@jadeequipment.com

James: 780-220-5524

sales@jadeequipment.com **O.A.C. + TAXES, $0 DOWN

6 MODELS AVAILABLE FOR ALL EXCAVATORS & BACKHOE LOADERS FROM 1.7 - 32 TONS WEIGHT CLASS. TILT ROTATORS COME WITH VARIABLE LOCK COUPLER

We Buy Salva Grad ge ers!

MAGNUM ATTACHMENTS WILL GIVE THE WORKING END OF YOUR MACHINERY SUPERIOR PERFORMANCE AND DURABILITY.

sales@jadeequipment.com • parts@jadeequipment.com

www.jadeequipment.com

71 STEINWAY BLVD, TORONTO, ON M9W 6H6

416.679.8752 | 1.877.640.2862 | FAX 416.679.8753

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

FLINTSTONE MINING DISPERSAL SALE! 250-692-6669

Page 23

EQU ALL MUS IPMEN TG T

Flintstone Mining of Burns Lake BC is shutting down operations after 11 years serving the Mining and Construction industries of Northern British Columbia. All of our equipment is marked down to CLEARANCE PRICING! If there is any equipment left in the yard at the end of June, we’ll be discounting the prices by 5% every week until it’s all sold. You heard that right. Discounted EVERY WEEK, until it’s all sold, so call now!

$108,300

$225,000

D L O S

2007 Komatsu HM400-2 Articulated Haul Truck, 15,132 hrs, KMTHM007C54A11050, Tailgates available $108,300.

$153,634

D L O S

2011 Komatsu PC450LC-8 Excavator, 4,312 hrs, KMTPC192E54A10278, thumb $225,000.

$125,701

2007 Komatsu Crusher BR380JG-1E0 Mobile 7,852hr 2061, includes NEW Magnet, $153,634.

$139,667

2004 Hitachi Z-800 Excavator, 6,200 hrs MCM17C00H00006018, $125,701.

$69,834

2011 Komatsu PC350LC-8 Excavator, 3,858 hrs KMTPC191C54A10572, Thumb, $139,667.

2008 Komatsu WA430-6 Wheel Loader, 12,210 hr KMTWA91K01065166, Quick Attch, includes forks, NEW Tires $69,834.

$69,834

$41,900

2005 Komatsu D65PX-115 Crawler Dozer, 65744, Ripper $41,900.

48” Knelson Concentrator XD489709501939019, $69,834.

$60,000

$34,917

Gold Wash Plant 2 deck horizontal $50,000. Gold Wash Plant 2 deck horizontal, $34,917.

D L O S

Ingersol Rand Drill, ECM67O, P9324816, $60,000.

$41,900

2005 International INT4300, H691850 Fuel Lube Truck, $41,900.

2006 Komatsu PC300LC-7EO Excavator, 17,488 hrs, KMTPC143H54A88008, $41,900.

2007 007 Komatsu HM400-2 Articulated Haul Truck, 15,682 hrs, A11109 Tailgates available ......................................$83,800. 2007 Komatsu HM400-2 Articulated Haul Truck, 13,914 hrs, 2193 Tailgates available ......................................... $83,800. 2006 Komatsu HM400-2 Articulated Haul Truck, 13,020 hrs, KMTHM007V26002130, Tailgates available ..............$83,800. 2006 Komatsu HM400-2 Articulated Haul Truck, 13,673 hrs, KMTHM007K26002107, Tailgates available ...............$83,800. 1993 Hitachi EX1100 Excavator, 178-1061 New Engine, Rock Bucket ....................................................................$104,751. 1995 Komatsu PC710-5 Hydraulic Excavator, 10,115 .......................................................................................... $69,834. 2005 Komatsu PC400LC-7L Excavator, 13286 hr KMTPC086K54A86572 new undercarraige ................................... $69,834. 2006 Komatsu PC300LC-7EO Excavator, 15722 hr KMTPC143L54A88007 thumb ................................................... $38,409. 1993 Cat 325L, Excavator, 2JK00243 48” Magnet .............................................................................................. $27,933. 1996 Samsung 350 .........................................................................................................................................$13,967. 1990 Cat EL200 .............................................................................................................................................. $12,570. 2007 Komatsu D65PX-150EO Crawler Dozer 13,974, 69469 Ripper..................................................................... $48,884. 2007 Komatsu D65PX-15EO Crawler Dozer 10,753, 70239 Ripper ........................................................................ $55,867. Komatsu D355A-3, U Dozer, Ripper, S/N 4665 .................................................................................................. $34,917. Cat D8K U Dozer, Ripper, Angle Dozer ............................................................................................................ $27,933. 2’ Symonds Cone Crusher................................................................................................................................. $1,397. 1997 Champion 780A Grader, X027074X includes front blade & wing ................................................................. $34,917. 1977 Champion 740 Grader ............................................................................................................................. $3,492. 1988 International Bucket Truck, 1HTLDTVP2JH536110 ........................................................................................ $6,893. 1978 Pacific P10W T78851161, Incl. Off-hwy lowbed ...........................................................................................$13,967. 1990 International INT4900, IHTSDDBRXLH2581, Water Tank ............................................................................ $12,570. Volvo 180KW ,126 hrs, Near New .................................................................................................................... $27,933. Quadra Control-Batch Plant Incl. Genset, Water Meter, Digital Scales, & Compressor ......................................... $27,933. Erie Batch Plant (Portable) Incl. Water meter, Digital Scales & Compressor ....................................................... $27,933. Knight Steering Booster LP, 4423KW ...............................................................................................................$2,095. 1952 Willock S/A Lowbed, 5,842, Beaver Tails ................................................................................................... $3,492. 1986 Nortrail T/A Log Jeep, 2N9ME3045GE016001 ............................................................................................ $3,492. 1994 Artic T/A Log Jeep, 2M9JC1745RP016037 ................................................................................................... $3,492. 1981 Artic Pole Trailer, 8103K21161 ................................................................................................................... $2,095. 1979 Peerless Pole Trailer, B79249201 ..............................................................................................................$2,095. 1994 Peerless Pole Trailer, 2PLA00926RGM71030 ..............................................................................................$2,095. 1993 Answer Pole Trailer, 2A9PT3143PVD45532 .................................................................................................$2,095. 1985 Decap Yellow Belly Dump, 85017LG18DEC49022 ..........................................................................................$5,587. 1981 Arnes B Train Belly Dump, AR813898 .........................................................................................................$2,793. 1978 Reliance B Train Belly Dump, 783665 .........................................................................................................$5,587. 1987 Doepker Flats, 2D9HBFA20H1016101, 28 ft AND 1987 Doepker Flats, 2D9HBFA20H1016102, 28 ft ....................... $1,397. 1996 Doepker Flats Red, 2DEHBFZ35T1010012, 32 ft AND 1996 Doepker Flats Red, 2DEHBFA23T1010013, 28 ft ...........$2,095. 1996 Loadking Flat, 2LDPF3232T8026623, 32 ft AND 1996 Loadking Flat, 2LDPF2823T8026624, 28 ft ........................ $1,397. 1998 Loadking Flat, 2LDPF2823W6029149, 32 ft AND 1998 Loadking Flat, 2LDPF3232W6029148, 28 ft .................... $3,492. 1990 Midland End Dump, 2C9B2S6C7LR018105, Frame twisted ............................................................................$2,793. 1969 London 10Yd Mixer Trailer, 311569 ........................................................................................................... $2,095. 2005 Ingersol Rand ST175 Light Tower, 4FVLSBDA350909 ................................................................................... $2,793. 2005 Ingersol Rand ST175 Light Tower, 4FVLSBDA95U851403 ..............................................................................$2,793. 2010 Ingersol Rand Compressor....................................................................................................................... $3,492. Pump 10 x 12 SLR ...........................................................................................................................................$10,475. Chuck Blade 84” ............................................................................................................................................ $6,983. 1100 Bucket 88” ........................................................................................................................................... $10,475. HM400-2 AEOLUS Radial Tires, 29.5 x R25, NEW ........................................................................................ $3,492./each HM400 Tailgates X 3 ............................................................................................................................. $5,238./each Bros Packer SPV 735....................................................................................................................................... $3,492. 30 x 96 West Magnetic Seperator..................................................................................................................... $2,793. 3 x 11’ Symonds R753 Gold Plant, Feeder and 20 x 40’ Conveyor ...................................................................... $10,475. Feeder 7 x 9 Kid Mount ................................................................................................................................. $10,000. Gold Wash Plant 3’ x 12’ Single ........................................................................................................................$13,967. Stationary Conveyor 18” x 24’, 2 Available .......................................................................................................$3,492. Stationary Conveyor 18” x 36” ....................................................................................................................... $4,190. Stationary Conveyor 18’ x 40 ........................................................................................................................... $5,587. Blue Conveyor Portable ..................................................................................................................................$5,587. 1986 3’ x 100’ Stationary Conveyor, Dismantled .............................................................................................. $13,967. Screen Deck .................................................................................................................................................. $2,793. HM400 PARTS Engine, differencials, lift cylinders, hoods, box, all NEW and many more items..................................CALL 2010 McKloskey S80 Screen Plant.................................................................................................................$100,000. 2007 Discovery 1 Core Drill, approx. 7500 metres drilled, complete w/ just about everything you need! .............$95,000. 2006 Hitachi ZX450 Excavator, 10,500 hrs, S/N FF016JQ011749 used 80%U/C Isuzu Eng.......................................$55,000. 1984 Kenworth C500, S/N 1NKCLA9X0EK318916, 5,000 gal tank, 3” Honda Pump ................................................$12,570. (4) New Michelin Tires and wheels to fit Komatsu WA200, 20.5 x 25..................................................................$10,475. 2005 Leika GPS 900 (Survey Equipment)........................................................................................................ $13,967. (2) Smith Sander for Tandem Axle Truck, with Grizzly ..............................................................................$3,492./ each Used Hydraulic Sluice Box ............................................................................................................................. $19,500. Used 36” x 30’ Log Washer for Washing Rocks, comes w/ electric motor and frame .............................................$5,587.

Phone: 250-692-6669 | Email: randyhamp@hotmail.com | gworthing12@hotmail.com Phone: 250-692-6229 | Website with more listings and photos: www.supplypost.com/flintstone

Page 24

Supply Post Western Canada Edition · supplypost.com

B.C. Blueberries Picked To Receive Buy Local Funding Summer once again brings sweet, juicy treats B.C. blueberries! Agriculture Minister Norm Letnick joined in the fun at the Blueberry Festival at Country Fest July 25th & 26th in Maple Ridge and announced that the BC Blueberry Council is receiving $50,000 from the provincial governments’ Buy Local Program. The Buy Local funding will be used to introduce a traditional advertising campaign with eye-catching signs and displays as well as in-store sampling for shoppers. Promotional flyers for customers will

advertise the arrival of B.C. blueberries on grocery store websites and enewsletters. Social media and radio ads including a marketing campaign on BCLiving.ca will encourage British Columbians to buy their blueberries locally. The BC Blueberry Council resides in Abbotsford and is a not-forprofit umbrella organization representing close to 800 blueberry growers in the province. B.C. blueberry season runs July through early October, and are available frozen yearround. The Buy Local program supports B.C. blue-

berry farmers by offering an opportunity to grow and thrive in the competitive blueberry market. The Buy Local program has received $6 million in B.C. government funding since 2012 to increase sales of locally grown and processed agrifood and seafood products within the province. Building the local market for B.C. foods is a key commitment of government’s Agrifoods Strategy, a component of the BC Jobs Plan, to lead the agrifoods sector growth into a $14- billion-a-year industry by 2017.

The provincial government’s Buy Local program is administered by the Investment Agriculture Foundation of British Columbia. Quotes: Minister of Agriculture Norm Letnick “When you buy fresh B.C. blueberries, you are supporting local agriculture and local famers. The funding from the Buy Local program will help the BC Blueberry Council thrive in a highly competitive market and put dollars back in to the economy, while supporting communities and families in the industry.” — Maple Ridge-Pitt Meadows MLA Doug Bing “The B.C. blueberry industry is booming. With instore promotion and online advertising blueberry farmers will have their products in the homes of British Columbians all over the

September 2015 province. Local blueberries highlight the fresh flavours we grow right here in our backyards.” — Debbie Etsell, BC Blueberry Council “The BC Blueberry Council is grateful of the support the Buy Local Program is providing to our blueberry farmers. The blueberry season is a wonderful time of year to celebrate the efforts and hard work of our growers and enjoy all the benefits of these tasty treats.” Quick Facts: • Currently there are over 11,300 hectares (28,000 acres) of the richest fertile farmland nestled between the Pacific Ocean and the coastal mountains devoted to growing upwards of 54 million kilograms (120 million pounds) of blueberries with production increasing steadily. • British Columbia is one

of the largest highbush blueberry-growing regions in the world, with Canada the third top-producing country, and still growing. • British Columbia produces about 95% of the Canadian production of cultivated blueberries. • About 95% of B.C.’s berry production occurs in the Fraser Valley. The rest are grown in the North Okanagan and on Vancouver Island. • One large handful (250 ml) of farm fresh and juicy B.C. blueberries is just 80 calories and contains 3.6 grams of dietary fibre. Blueberries are ranked number one in antioxidant health benefits in a comparison with more than 40 fresh fruits and vegetables. b Source: Gov’t of BC

John Deere Creates GoPush App For 1050K Customers

sit Come Vi site Our Web w To Vie ts! uc Our Prod

Canada’s Largest John Deere Engine Distributor Diesel Engines from 35 to 600 hp Hundreds of Engines in Stock! Funk Power Transmission Products: Axles, Transmissions, PTOs, HMDs • Engines • Generator Sets • Pumping Units

Delta, BC Edmonton, AB

1-877-946-5531 1-877-455-2260

Calgary, AB Winnipeg, MB

1-877-720-3735 1-877-949-1526

sales@frontierpower.com

www.frontierpower.com

Ramsey Company InC. Office: (360) 748-8918 | Jim Ramsey (360) 269-3437 | Jack Ramsey (360) 269-0902

John Deere’s GoPush mobile application is available for download as of July 1, for 1050K crawler dozer customers. The GoPush app brings convenience to the jobsite, with features to enhance productivity and efficiency. “The features of the GoPush app were designed with our 1050K customers in mind,” said Mark Oliver, crawler dozers product marketing manager, John Deere Construction & Forestry. “The goal of the app is to provide operators and fleet managers a wealth of knowledge to make them more productive on the jobsite – all at the push of a button.” The GoPush app in-

cludes daily service information, recommendations based on extreme site conditions (such as operating on slopes), a maintenance checklist, machine setup, and icon glossary to easily and conveniently familiarize oneself with the instrument panel. The mobile application is available for iPhone and Android devices and also acts as an operator’s quick reference guide, allowing contractors instant access to information about their 1050K. The GoPush application is available for free download in the Store and Google Play. b Source: AED

The fineST BuckeTS, SySTeMS, TRaininG anD DeSiGn!

Reach out over 1,500' | Dig to 120' or more! Turnkey systems from 4 - 15 cubic yards! Sand, Gravel, Mud & Slurry - We can dig it!

vIsIt us onlIne: www.RamseyCoInC.Com

September 2015

Supply Post Western Canada Edition 路 Our Readers Are Your Buyers

Page 25

Page 26

Supply Post Western Canada Edition · supplypost.com

September 2015

Excavator Enhancements Lead To Fuel Savings, Improved Uptime

2007 KOMATSU HM300-2, Stk# K2053, 8,222 hours $189,500

2014 JOHN DEERE 290G, Stk# K2113, 1,068 hours $299,000

2015 CAT CC34B, Stk# K2246, 5 hours, $88,000

2012 CAT 815F, Stk# K2128, 2,630 hours $449,000

2014 JOHN DEERE 450J, Stk# K2185, 127 hours $158,000

2012 CAT D6T LGP, Stk# K2153, 2,977 hours $364,800

2005 CAT 14H, Stk# K1984, 8,249 hours $323,000

2008 CAT 928HZ, Stk# K2065, 4,367 hours $100,000

2014 MOROOKA MST 2200, Stk# C189, 513 hours $252,500

OVER 190 PIECES FOR RENT NOW! CALL 1-888-594-1998

Doosan expands its heavy equipment line-up with four new crawler excavators, delivering increased performance, improved operator comfort, unmatched reliability and durability. The new models include the DX255LC-5, DX420LC-5, DX490LC-5 and DX530LC-5. New Features • Improved anti-skid

plates: increases traction on surfaces • Auto belt tensioner, fan and air conditioning: simplifies maintenance • Auto-shutdown: saves fuel during non-working conditions • Battery upgrades: minimizes downtime • Emergency engine stop: relocated for easier operator access

• Improved serviceability: allows for easier access to components and less time for maintenance • LCD panel updates: displays key machine information and camera images simultaneously • Upgraded alternator: delivers improved power for electrical components • New front window design: provides good visibility to the work area and is easier to open and close A new auto-shutdown feature helps owners save Continued on page 27

MOBILE, ENGINEERED SOLUTIONS FOR ALL OF YOUR ON-SITE NEEDS.

Civil Contractors · Aggregate Processors · On Site Concrete Suppliers S E R V I N G T H E F O R E S T R Y, M I N I N G , O I L & G A S , A N D H E AV Y C I V I L I N D U S T R I E S

Tel: 778.874.8891 | kyle.dolan@pacificsite.org Suite 102, 19188 94th Avenue, Surrey, BC V4N 4X8

ARTICULATED DUMP TRUCKS Hydrema Earth Moving Equipment is developed and built in Denmark. With 56 years of industry knowledge, Hydrema is one of the world’s leading suppliers of specialized earth moving equipment in the world. PSI 12.5Pressure d Groun ully F ed Load

LOW GROUND PRESSURE 12T EARTH MOVERS • • • • • •

Cummins 4.5 Tier 4 Interim engine ZF automatic 6 speed transmission 12 ton capacity 12.5 PSI ground pressure fully loaded 800/45x30.5 Flotation tires Hydraulic front suspension

DEMOS AND RENTALS AVAILABLE • SERVING WESTERN CANADA

www.hydrema.ca · sales@hydrema.ca · 1-877-318-4581

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Continued from page 26

fuel during non-working conditions. When enabled, the feature will shut down the excavator’s engine when the preset idle time is met — operators can configure the idle time from 3 to 60 minutes. This is particularly helpful in California, where state regulations limit idling to 5 minutes for off-highway machines.

Smart Power Control (SPC), a new selectable feature, consists of two systems — Variable Speed Control and Pump Torque Control — that work together to improve machine efficiency while maintaining productivity and reducing fuel consumption. The engine control unit (ECU) automatically manages SPC when SPC is en-

Page 27

gaged. Each of the four power modes will function with SPC engaged or disengaged; however, SPC can only be active in the digging work mode. • Variable Speed Control: Reduces engine rpm during low workload requirements such as during the swing portion of a dig cycle, which reduces Continued on page 28

Rollins MACHINERY LIMITED www.rollinsmachinery.ca E-mail: don@rollinsmachinery.ca

Langley: (604) 533-0048

VAC-CON Combination & Excavator Trucks

Your BC Dealer for Vac-Con Combination and Excavator Trucks New Demo truck is in stock and we invite all Contractors and Cities to arrange a Demo.

OTHER PRODUCTS AVAILABLE CONTACT US TODAY! environmental group

Service Centres: Langley • Chilliwack • Parksville • Vernon

1-800-665-9060 Toll Free: 1-800-665-9060

LOW GROUND PRESSURE 22T EARTH MOVERS • • • • • •

Cummins 6.7 Tier 3 engine ZF Automatic 6 speed transmission 22 Ton capacity 11.7 PSI ground pressure fully loaded 800/45x30.5 Flotation tires Hydraulic front suspension

DEMOS AND RENTALS AVAILABLE • SERVING WESTERN CANADA

www.hydrema.ca · sales@hydrema.ca · 1-877-318-4581

Page 28

Supply Post Western Canada Edition · supplypost.com

engine response to the task, preventing engine the total energy required overload and excess fuel to perform a task and imconsumption, improving proves fuel efficiency by efficiency. up to 5 percent. Tier 4 solution • Pump Torque Control: The new crawler excaEfficiently matches hydraulic pump torque and vators are powered by TierContinued from page 27

4 compliant engines and have been optimized for use with a high-pressure common-rail (HPCR) fuel delivery system, cooled exhaust gas recirculation and variable geometry turbocharger (VGT). A selec-

Vancouver TracParts

vtp

September 2015 prove the management of airflow from the VGT, and optimizes fuel delivery to the combustion chamber based on engine air intake volume and rpm. b

tive catalyst reduction with diesel exhaust fluid and a diesel oxidation catalyst are included. Other new features include an exhaust brake and a mass airflow sensor that allows the electronic control unit to im-

Source: Doosan

Your Excavator Parts Specialists!

Growing Together with our Customers! DRIVEN. EXPERIENCED. COMMITTED.

PUBLIC AUCTION TUESDAY, Sept. 15th, 2015 Calgary, AB

For a comprehensive brochure, please call Canadian Public Auction Ltd.

403-269-6600 or 800-786-0857 Live Internet Bidding: www.canadianpublicauction.com

All internet purchases are subject to an internet buyer’s fee & a deposit may be required depending on your purchase history. Auction License # 200278, AMVIC License # 200279.

1-888-331-6878 | 604-468-7828 www.vancouvertracparts.com

www.canadianpublicauction.com

TOLL FREE 1-855-559-9995 PHONE 250-468-1000

EVENINGS & WEEKENDS CELL 250-951-1944

WWW.VIEQUIPMENTLTD.COM

INFO@VIEQUIPMENTLTD.COM

PARTS MACHINES

Hitachi ZX850LC-3

HITACHI ZX270 LC

EQUIPMENT FOR SALE

HITACHI ZX450-LC-3

(2012) w/ Cat 3 foot trenching bucket, Cat 4 foot dig bucket, quick change and thumb. Cab rollover protection w/ lights, 850 mm triple grouser U/C; warranty until 4000 hours. Four months warranty left on powertrain. Full combo hydraulics. Digital instrument cluster w/ full time rear view camera. Heated seats, A/C & heat, AM/FM radio, and CB radio. Powered by Caterpillar Acert C9.3 diesel engine with positive air shut off. 3164.6 total operating hours; 2265.1 total idle hours.

CAT 336E EXCAVATOR

3,164.6 HOURS

$266,000

DISMANTLED EXCAVATORS

Cat 325B LL

Cat 325C FM

JD 350D

Hitachi ZX450 LC-3 Hitachi ZX270 LC-3 Hitachi ZX200 Hitachi EX200-2 John Deere 200C LC Hitachi ZX330 LC John Deere 200 LC John Deere 120 Cat 336E Cat 330CL Cat 330B Cat 314C

Cat 320BL Cat 345BL Cat 325 Cat 330L Hitachi EX400 John Deere 270D Hitachi EX300-3 John Deere 892E LC Hitachi EX400-1 Hitachi EX220-3 Hitachi EX330 LC-5 John Deere 790E

Hitachi EX200LC-3 Hitachi 270-5 Hitachi ZX330 LC John Deere 200 LC John Deere 892D John Deere 330 LC John Deere 690E John Deere 892E Hitachi ZX240 LC-3 Hitachi ZX270 LC-3

OTHER DISMANTLED EQUIPMENT

JD 850D LC

Hitachi ZX270LC-3

Cat 330C Hitachi ZX270LC-3

John Deere 653E Feller Buncher

Tigercat 870C Feller Buncher

John Deere 200C Forestry Machine

EXCAVATOR PARTS FOR JD/HITACHI/CAT · NEW/USED/REBUILT

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 29

682 Okanagan Ave. E., Penticton, BC, Canada

1-866-344-6480

cturchak@brutusbodies.com

SERVICE TRUCKS IN STOCK AND READY TO WORK PETERBILT 4X2 REGULAR CAB

DODGE 5500 4X4 CREW CAB

KENWORTH 4X4 REGULAR CAB

PETERBILT 4X4 REGULAR CAB

w/14' service body, Viking 65, Cobra 11000 (unit 1885)

w/11' service body (unit 2227)

w/13' service body, Predatair 60, Cobra 11000 (unit 2368)

w/12' service body, Viking 65, Cobra 11000 (unit 2013)

DODGE 5500 4X4 CREW CAB

FORD F-250 4X4 REGULAR CAB

KENWORTH 4X4 REGULAR CAB

FREIGHTLINER M2 4X4 EXTENDED CAB

w/11' service body, VR70, Cobra 5500-units 2140 & 2141

w/8' service body (unit 2229)

w/13' hybrid service body, Predatair 60, Cobra 8000 (unit 2046)

w/14' hybrid service body, Predatair 60, Cobra 12000 (unit 2267)

FREIGHTLINER 4X2 EXTENDED CAB

FREIGHTLINER 4X4 EXTENDED CAB

INT’L TERRASTAR 4X4 EXTENDED CAB

DODGE 5500 4X4 CREW CAB

w/12' service body, Tiger 45, Cobra 11000 (unit 2012)

w/13' hybrid service body, Predatair 60, Cobra 8000 (unit 2266)

w/11' service body, VR70, Cobra 5500 (unit 2413)

w/oilfield deck, Fassi F65A.0.24 (unit 2222)

FORD F-550 4X4 SUPER CAB

DODGE 5500 4X4 CREW CAB

PETERBILT 4X2

FREIGHTLINER M2 4X4 EXTENDED CAB

w/11' service body, VR70 Cobra 5500 (Unit 2282)

w/11' service body, VR70, Cobra 5500 (unit 1817)

w/11' service body, Predatair 60, Fassi F155A.0.25 (unit 2117)

w/12' service body, Predatair 60, Cobra 11000 (unit 2010)

DODGE 3500 4X4 CREW CAB

FREIGHTLINER TRIDEM REGULAR CAB

DODGE 5500 4X4 CREW CAB

DODGE 5500 4X4

w/8' service canopy (unit 2205)

w/Fassi F660RA.2.28 (unit 2182)

w/oilfield deck, Fassi F80A.0.24 (unit 2125)

w/oilfield deck, Fassi F80A.0.24 (unit 2124)

FORD F-550 4X4 SUPER CAB & CREW CAB

DODGE 5500 4X4 CREW CAB

DODGE 5500 4X4

w/11' service body, VR70, Cobra 5500 (units 2069 & 2070)

w/11' service body, VR70, Cobra 5500 (units 2100 & 2101)

w/11' service body, VR70 (unit 2176)

w/oilfield deck, Fassi F80A.0.24 (unit 2306)

www.brutusbodies.com

Page 30

Supply Post Western Canada Edition · supplypost.com

September 2015

SSAB Is Launching Strenx: The New Brand For High-Strength Steels

1-888-575-LIFT (5438) 17567 55B Ave, Surrey BC

THOSE IN THE KNOW KNOW

FALL INVENTORY CLEARANCE NEW TAKEUCHI TB016

CONTACT Jonathan Houweling Cell: (604) 802-0841 jhouweling@toplift.com

$611

Model

$32,410**

3,524 lbs. 8,535 lbs. 12,681 lbs. 18,780 lbs. 18,370 lbs. 34,700 lbs. (RT)

TRACK LOADERS

Model TL230-2 TL10 TL12

NEW TAKEUCHI TB138FR

Tipping Load 5,400 lbs. 6,867 lbs. 8,102 lbs.

$1,014

/60 Months* or purchase for

$53,900**

8,100 lbs, Zero Turn Radius, Swing Boom, Hydraulic Thumb, Cab with Heat and A/C, 2 Buckets.

NEW TAKEUCHI TB1140

$2,821/60 Months*

or purchase for

LAST UNIT AVAILABLE

$148,000**

SELECT YOUR PLAN OF ATTACK.

As long as there are options, there’s a way to attack your monster job. Selectable Joystick Controls (SJC) start with low-effort hand control of all machine workgroup functions – in “ISO” “or “H” patterns – but that’s not all. Four exclusive functions change the way your machine handles, to make attachment operation more efficient and precise than ever before.

SKID STEERS

Model

Tipping Load

TS50R TS60R TS50V TS60V TS70R TS70V

3,000 lbs. 3,000 lbs. 4,000 lbs. 4,000 lbs. 3,987 lbs. 5,270 lbs.

34,200 lbs, Offset Boom, Rubber Tracks, Hydraulic Thumb, Cab with Heat and A/C, 2 Buckets, 3 Aux Hydraulic Lines, Fully Loaded!

NEW TAKEUCHI TL230 ONE UNIT ONLY!

TW50 TW65 TW80

57 hp 69 hp 80 hp

A WISE CHOICE FOR ALL KINDS OF TASKS. Visit Bobcat.com/Option11 to watch SJC in action.

Authorized Bobcat Dealers

ALBERTA

BRITISH COLUMBIA

Williams Machinery, LP

Calgary

Cranbrook

250-491-2939 • 877-491-2939

www.cervusequipment.com

250-563-0181 • 888-763-0181

Cervus Equipment 403-243-2011

Edmonton

WHEEL LOADERS

Model

GOT A BEAST OF A JOB?

ONE UNIT ONLY!

Op. Wt.

TB216 TB138FR TB153FR TB290 TB180FR TB1140-S2

rolling stock, offshore and construction sectors. Now customers will be able to design more competitive and sustainable products – cranes that reach further, trailers that carry more payload, trucks that use less fuel. “For customers, this is a totally unique product since Strenx now covers the three product brands Optim, Weldox and Domex that are well-known trademarks of SSAB and the former Ruukki. Strenx embodies our over 50 years of experience in high-strength steels,” says Gregoire Parenty, Head of Market Development at Source: SSAB

/60 Months* or purchase for 3,550 lbs, Quick Attach Coupler, Hydraulic Thumb, 2 Buckets. Ready for Work Today!

EXCAVATORS

SSAB is launching Strenx, a new highstrength structural steel product brand, which offers the most extensive portfolio of high-strength steels on the market. This will open up new competitive possibilities for customers to make stronger, lighter and more sustainable products. Strenx is designed for sectors where structural strength and weight savings are key competitive factors, especially in the lifting, handling and transportation industry. Strenx is also well-suited for agriculture, the frames of heavy mobile machines,

SSAB. Strenx features the world’s widest choice of high-strength structural steels both in terms of strength and dimensional range. Yield strengths range from 600 Mpa to 1300 Mpa, which is the strongest steel available on the market. Strenx is available in plate, strip and tubular products in thicknesses ranging from 0.7 mm to 160 mm. “We give full support to designers and customers to help them upgrade to Strenx. By sharing our in-depth experience and wide knowledge of steel we can guarantee the best results for end-product performance,” adds Gregoire Parenty. b

780-447-4441

$926/60 Months*

or purchase for

$49,870** 8,300 lbs, 69 Horsepower, Cab with Heat and A/C, Hydraulic Quick Coupler.

www.toplift.com ** Taxes Not Included * On Approved Credit

Fort McMurray 780-714-9200

Red Deer County 403-346-9011

www.cervusequipment.com

Rentco Equipment, Ltd. Grande Prairie

780-538-0791 • 855-538-0791

Peace River

780-624-4646

www.bobcatofthepeace.ca

Cervus Equipment 250-417-0272

Rentco Equipment, Ltd. Fort St. John

250-785-1197 • 855-785-1197 www.bobcatofthepeace.ca

Westerra Equipment, LP Abbotsford

604-850-7313 • 800-563-7313

Kamloops

250-314-3600 • 888-314-3601

Nanaimo

250-716-0443 • 877-700-0024

Kelowna

Prince George Surrey

604-930-3300 • 800-667-1733

Vernon

250-545-0609 • 877-945-0609 williamsmachinery.com

SASKATCHEWAN

Bobcat of Regina, Ltd. Regina

306-347-7600

bobcatofregina.com

Victoria

250-478-8860 • 877-478-8860 www.westerraequipment.com

0815429_AttackSJC_SPW_4-812x8-583_Sept_a2.indd #41988 Supply Post West - 4-color - 4.812” x 8.583” - March. 2015 - 2.19.15

September 2015

Supply Post Western Canada Edition 路 Our Readers Are Your Buyers

Page 31

PERFORMANCE

WHEN IT MATTERS, TO GET THE JOB DONE

The more things change, the more they stay the same. For over 70 years, DRESSTA redefined what was possible with a bulldozer. Today, the bar continues to be set with the M Series and R Series bulldozers. Are you looking for the best bulldozer on the market?

Contact your local dealer today to see what a DRESSTA bulldozer can do for you. No dealer in your area? Call 1 (844) DRESSTA for support.

333 Holden Street Winnipeg, MB R2J 3W3 204-257-4767 www.k4equipment.com

PURE PERFORMANCE

POWERFUL

RELIABLE

www.dresstanorthamerica.com

VERSATILE

Page 32

Supply Post Western Canada Edition · supplypost.com

September 2015

CASE EXCAVATORS Case Intelligent Hydraulic System (CIHS) By blending four integrated hydraulic control systems CASE excavators can move more dirt per gallon and load more trucks per shift. • Boom Economy Control (BEC) reduces RPMs during boom down and swing • Auto Economy Control (AEC) lowers RPMs during idle • Swing Relief Control (SWC) manages hydraulic power at the swing star • Spool Stroke Control (SSC) adjusts hydraulic pressure during digs

3-year/3000-hr. Full-Machine Factory Warranty

3-year Advanced SiteWatchTM Subscription

3-year/3000-hr. Planned Maintenance

www.parkerpacific.com

Contact your local Inland branch for full details on ProCare by Case

SHOVEL. PROCESS. LOAD. One machine. Three jobs. The Tigercat 880 logger is a multi-purpose carrier designed for loading, shovel logging and processing. The 880 can be configured as a loader with various power clam and butt-n-top grapple options. The boom geometry and cab positioning provide unmatched righthand side visibility. Equipped with a live heel boom system, the 880 is a highly capable shovel logger with excellent stability, tractive effort and swing torque. The 880 can also be configured as a high capacity processor capable of running large harvesting heads in demanding duty cycles. Contact your nearest Inland location today to learn more about the efficiency and performance of the 880 logger.

www.parkerpaciﬁc.com Campbell River, BC 250-287-8878

Fort St. John, BC 250-785-6105

Langley, BC 604 607-8555

Penticton, BC 250-492-3939

Quesnel, BC 250-992-7256

Williams Lake, BC 250-392-7101

Cranbrook, BC 250-426-6205

Kamloops, BC 250-374-4406

Nanaimo, BC 250 758 5288

Prince George, BC 250-562-8171

Vernon, BC 250-545-4424

Whitehorse, YT 867-668-2127

519.753.2000

comments@tigercat.com

www.tigercat.com

www.facebook.com/Tigercat

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER

SECTION 2

WWW.SUPPLYPOST.COM SEPTEMBER 2015 · PAGE 33

1984 AN

NIVE

RSARY

2015

NEW & USED • SALES • RENTALS • PARTS & SERVICE

END OF SUMMER SALE

2010 Powerscreen Chieftain 2100

2003 Terex Finlay Hydrascreen

5X20 Double Deck, High Producing Machine. Priced To Sell

Topsoil Shredder Attached, 4X10 Double Deck, Low Hours, Excellent Shape.

R CE REP DUIC ED!

2010 Telestack TS532

Pioneer Jaw

100' Telescopic Conveyor, Road Legal, 46,000 Ton Stockpile Capacity.

Magnet, New Jaw Liners, Electric Power

2011 Powerscreen Warrior 800

2011 Powerscreen Chieftain 1700

4X9 Double Deck Screener, Set Up In Minutes, Excellent Shape.

5X16 Triple Deck, 4 Screened Products, 5,800 Hours.

1-888-852-9021

Call Toll Free in Western Canada:

ALL UNITS F.O.B CHILLIWACK, BC.

www.foremanequipment.com Washing Systems

Page 34

Supply Post Western Canada Edition · supplypost.com

September 2015

www.lonetrack.com

www.chieftainequipment.com

Machines Available To Own & Rent! NEW JCI KODIAK 300+ CONE PLANT

300 HP CONE, ADJUSTABLE CONVEYORS TO MATCH YOUR SCREEN PLANT, HD CHASSIS WITH HYDRAULIC LANDING LEGS, BC TRANSPORT LEGAL

SANDVIK QI240 PRISEC 4 BAR IMPACT CRUSHER, CROSS BELT MAGNET, CAT ENG., LOW HRS. CALL

2011 EDGE FTS65 FEEDER STOCKPILER, HD TIPPING GRID, CAT ENG., 40” X 65’ STACKING BELT. CALL



LOW-HOUR MACHINE!

PUGMILL - KPI MODEL 52S

Low hour, 4' x 8' Twin shaft with 100hp drives; 2nd hopper and asphalt pump can be added and controlled - excellent condition. CALL FOR DETAILS.

 Washing  Screening  Crushing  Conveying  Power Vans  Feeders  Concrete  Recycling FULLY STOCKED PARTS WAREHOUSES TO SERVE YOU. Western Canadian Dealers for

LOW HOUR KPI 36"X125' CONVEYORS. HYD. HEAD AND TAIL FOLD, 50 HP DRIVE, GULL WING AXLE, VERY WELL EQUIPPED, GOOD CONDITION. CALL

USED JCI KODIAK K300 CONE CRUSHING PLANT. CALL

EDGE TS80 1,200 HOURS, 40" WIDE X 80' LONG TRACK MOUNTED CONVEYOR, CAT DIESEL. CALL FOR DETAILS.

EDGE TRM 622 TROMMEL SCREEN WITH 180˚ RADIAL FINES STOCKPILING CONVEYOR 2013 SANDVIK OJ 341 TRACK JAW CRUSHER CALL FOR DETAILS

EDGE MS80 36” X 80’ ELECTRIC POWER CONVEYORS C/W RADIAL TRAVEL & HYDRAULIC FOLD. WORK READY. PLEASE CALL

Serving Western Canada ALBERTA

William Thompson - 780-474-8082 | Willie@chieftainequipment.com Calgary - 403-265-7460 | geoff@chieftainequipment.com Edmonton - 780-460-2220

BRITISH COLUMBIA Trevor Ward - 604-657-5118 | trevor@lonetrack.ca Hugh Porter - 604-657-7167 | hugh@lonetrack.ca Parts & Service - 604-856-7278

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Terex CC 8800-1 Twin Crawler Crane Completes Qatar AGR Lifts Al Jaber Heavy Lift and Transport recently used its 3,200 tonne capacity Terex CC 8800-1 TWIN crane to help complete a series of super-heavy lifts on a petrochemical development in Qatar. The project involved a total of 143 lifts, 31 of which were carried out using the 1,600 tonne capacity Terex CC 8800-1 crane

and two lifts - installing two AGR (Advanced Gas Reactor) absorbers each weighing 1,300 tonnes with the crane in its TWIN format. The lifts were planned by Al Jaber site manager Sevi Phillip over a period of 18 months with the two AGR absorber lifts critical in the company being awarded the contract. With

ACTION

LEASE

Darlene Mueller 604-308-8552

Equipment Leasing for • New & Used Equipment • Private Equipment Sales • Pre-Approved Auction Sales

Call for more info or a FREE Quote today. actionlease@shaw.ca ActionLease.ca

the single boom 1,600 tonne capacity CC 88001 crane already on site to carry out the smaller capacity lifts, the crane was then adapted to SSL TWIN configuration by adding the second boom to lift the two AGR absorbers. Once fully rigged in TWIN format, the selfpropelled modular trailers (SPMT’s) used to move the huge columns into position were also assembled. Each absorber was raised from the horizontal to the vertical using the CC 88001 TWIN crane as the main lift crane and using a tail frame to control the base of the absorber. Once the CC 8800-1 TWIN crane lifted the absorber clear of the SPMT’s, the trailer was moved out of way and the lift continued until the column was vertical. At this point the tail frame was then removed leaving the crane to carry the whole weight of the absorber. Next the crane slewed through 90 degrees and placed the column into its final position on the specially prepared foundation. The TWIN was then partially de-rigged so

PIERCE GRAPPLES: LOG ON!

Page 35

For more than 30 years, Pierce has been manufacturing forestry grapples using input from professional loggers like you. As machinery and loggers get stronger, so do Pierce grapples. The result is a product that does all the things you need it to do, easily and efficiently. Pierce forestry grapples are out there and headed your way. Ask your Pierce rep to tell you more today.

MARK SHUKLA 250.826.5218 mshukla@piercepacific.com

TC FORESTRY GRAPPLE GRAPPLE & LINK

MSRP

TC52

$23,719

TC60

$25,016

TC68

$29,973

Prices may change without prior notice.

WWW.PIERCEPACIFIC.COM

TOLL FREE: 800.760.3270

PORTLAND, OREGON JACKSON, MISSISSIPPI EDMONTON, ALBERTA

Continued on page 36

SCREENING & CRUShING

SOLUTIONS

ANACONDA 516 TROMMEL

2015 MINYU DIESEL CONE

SCREEN MAChINE 516 SCREENER

NEW 2015 - 516 ANACONDA TROMMEl - high sTACkiNg fOlD OuT CONvEyOR - jCb DiEsEl - REMOTE CONTROl

45” MiNyu CONE - hyD ADjusT - hyD ClEARiNg - CAT C9 (5,000 hRs) - 45 kW gENERATOR - TANDEM ChAssis *sERviCED - fiElD READy - fACTORy WARRANTy*

NEW 2015 - 516 DiEsEl sCREENER - OpEN fEEDER - 3 fOlD OuT CONvEyORs - REMOTE CONTROl. ***RENTAl AvAilAblE***

2014 TELSMITh 620 hORZ. SCREENER

NEW 2015 - POWER VAN

SCREEN MAChINE CST CONT

2014 620 TRiplE DECk hORZ. sCREENER - 1200 hRs Oh fEED - CROss CONvEyORs - pOWER CORDs jACkiNg lEgs. ***fiElD READy***

NEW 2014 pOWER vAN - 400 & 150 sOfT sTARTs / 27 sTARTERs 10” CAb - siDE DOOR - 1265l DOublE WAll TANk COMEs WiTh OR W/OuT NEW CuMMiNs 600 kW gENERATOR

sCREEN MAChiNE 51" TRACk CONE, lARgEsT TRACk CONE iN ClAss REMOTE ADjusT - DAT C9 pOWER *** RENTAl AvAilAblE ***

GRANT / SALES MANAGER

IAN / b.C.

WAYNE / N. ALbERTA

GREG / S. ALbERTA

780.887.7123 250.617.7953 780.887.1411 780.915.6637 grant@groundw.com

Instant fInancInG (oac)

CRUSHERS

SCREENERS

Visit Our Website tO VieW Our entire equipment selectiOn

CONVEYORS

Groundworx.ca SALES

RENTALS

WE sEll WhAT WE kNOW & WE kNOW WhAT WE sEll©

Page 36

Supply Post Western Canada Edition · supplypost.com Continued from page 35

that it could track a short distance into the correct position to carry out the second lift and then be re-assembled to carry out the identical lift sequence with the second AGR absorber. Mark Rowlands, project manager with Al Jaber Heavy Lift based in the Middle East said that the contract was further complicated because of the intense heat in the summer and wind variations. “The Terex CC 8800-1 TWIN is not just the best crane

STATIC VIBRATORY UP TO

72” DEPTH

September 2015 for the job, but the best crane!” he said. “It was comfortable, easy to use, stable and flexible and the operators were very happy with its precise and user friendly controls.” “We were all very pleased with the crane and how it performed. Everything went according to the plan - it was a dream come true!” said Phillip. “We were all surprised how compact the CC 8800-1 TWIN was given its huge lift capacity. There were 27,000 people on site so space

was at a premium. We worked with the client to minimize time and space requirements which really benefitted the whole project.” The AGR absorber column is a critical item in the liquefied natural gas processing train helping remove hydrogen sulphide, carbon dioxide and organic sulphurs in the raw feed gas so it complies with LNG liquefaction process or sales gas production standards. b Source: Terex

BUILDINGS FOR MINING Two Companies Joined Forces to Provide the Industry with Rugged Pre-engineered Steel Building Solutions FUTURE BUILDINGS

BRON Add-On Utility Plows are the most cost-effective method for installation of fiber optic, copper cable, conduit and pipe. Available as static or vibratory, there is a BRON Add-On Utility Plow that’s right for you.

1.800.263.1060

www.rwfbron.com

BRON is a registered trade mark of RWF Industries a division of Roberts Welding & Fabricating Ltd.

EECI 15017 S04

Call today for a dealer near you!

Arch Style or Straight Wall Serving Canada’s Mining and Energy Industries for Over 30 Years Quote Your Next Building Project

1-800-668-5111

ext www.BuildingsForMining.com 2024 mining@futurebuildings.com

Tough jobs call for tough equipment Whatever your day brings, whatever the job you need to complete, our equipment is up to the task.Proven on jobsites for over 160 years, Wacker Neuson construction equipment exceeds the industry standard for performance and durability. With a network of dealers ready to serve you, your next job will get done quickly and economically. 4 Way Equipment/CERF GP Corp. Edmonton, AB T6P 1X8 (780) 464-4929

CC Equipment Sales Ltd. Surrey, BC V3S 6J9 (604) 322-3110

Rays Trailer Sales (2007) Ltd. Camrose, AB T4V 3V8 (780) 672-4596

Allscape Ltd. LaSalle, MB R0G 1B0 (204) 261-1800

High River Rentals High River, AB T1V 2A6 (403) 652-4445

Regent Rental & Supply Brandon, MB R7C 1A4 (204) 728-0321

Altaland Equipment Sales Inc. Sherwood Park, AB T8H 2R6 (780) 410-1065

KMC Kootrac Crescent Valley, BC V0G 1H0 (250) 359-5033

The Rent-It Store Ltd. Saskatoon. SK S7K 0W4 (306) 652-0101

Can-American Enterprises Inc. Kelliher, SK S0A 1V0 (306) 675-2099

Prime Rentals Ltd. Lethbridge, AB T1H 5T2 (403) 320-4577

www.wackerneuson.com 1-800-201-3346

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Volvo ECR145E And ECR235E Prove Powerful Performers In Tight Places The new E-series short swing crawler excavators from Volvo Construction Equipment deliver better visibility when operating in confined spaces and greater fuel efficiency without compromising on power and performance. To capitalize on efficiency and productivity, both machines offer integrated working modes, which al-

low the operator to choose the best work mode for the application — I (Idle), F (Fine), G (General) or H (Heavy). To further improve fuel efficiency, these machines are equipped with auto idle and engine shutdown features. The auto idle function reduces engine speed to idle when the controls are inactive for a pre-set amount of time. If

2045 W Trans Canada Hwy, Kamloops, BC, V1S 1A7

Heavy equipment parts & repairs FuLL repair FaCiLity-FieLD serviCe

BOOM PINS & BUSHINGS UNDERCARRIAGE • ENGINES TRANSMISSIONS • G.E.T. ROTEC BEaRINGS FINAL DRIVES • ELECTRICAL 1-8E9888 RbLT TRANS. 1-0R7825 PUMP

P: 250.374.3443 F: 250.374.3510

the machines are left idle for longer, the optional auto engine shutdown feature will automatically turn off the machine. These excavators have been built to tackle a range of applications with a durable undercarriage to ensure impressive tractive force when climbing, as well as when traveling over both rough and soft terrain. “The centre-positioned boom and compact swing radius of these machines make them ideal for tackling jobs in confined urban areas that still require a great deal of stability, power and digging depth,” said Matt McLean, Product Manager – Excavators, at Volvo Construction Equipment. Backed by lifetime warranty Volvo excavators are designed and built with unsurpassed frame and structure durability, and Volvo stands behind this quality by offering a lifetime warranty on the boom, arm and frame. Comfortably in control Built with the operator in mind, the newly designed Volvo cab is equipped with a rollover protection strucContinued on page 38

780•887•7123

Page 37

Coldstream H.d. EquipmEnt SalES ltd. 3240–48th Ave, Vernon, BC V1T 3R6 • Phone 250-558-4599 Fax 250-558-4502 • Cell 250-549-0104

Cat D6D Crawler, Double Angle Tilt Dozer, 7,974 hrs, good cond., $39,500

• 4 Michelin 17.5 x 25 radial Tubeless Tires • 3 -17.5 x 20 Tubeless Tires Call

1981 Volvo 4500 Wheel Loader w/80% Michelin 23.5 x 25 tires, 4 yd. bucket, Q/A forks. $29,500

•Cat 72” Clean-Up bucket •Komatsu 150 Clean-Up bucket Call

Komatsu D85 Dozer with cab, angle dozer, 2 shank ripper. Call

250-558-4599

Page 38

Supply Post Western Canada Edition · supplypost.com Continued from page 37

EXCAVATOR AND WHEEL LOADER DEMO PROGRAM • LOW RATE FINANCING • 3 YEAR/4,000 HOUR FULL MACHINE WARRANTY • ATTRACTIVE RENTAL RATES • TIER 3 - NO DEF, NO REGEN, EASY TO MAINTAIN

WHEEL LOADER MODELS

BUY

RENT

835Z III - 2.5 cu yd.................................$138,000 ...............$4,500/Mo. 842Z III - 3.5 cu yd.................................$155,000 ...............$5,400/Mo. 856Z III - 4.5 cu yd (950 size) .................$192,000 ...............$6,000/Mo. 877Z III - 5.5 cu yd.................................$360,000 ...............$6,750/Mo.

EXCAVATOR MODELS

BUY

RENT

915 LC III (w/2-way blade) ....................$133,296 ...............$4,200/Mo. 922 LC III...............................................$162,734 ...............$5,000/Mo. 925 LC III...............................................$194,587 ...............$6,300/Mo. 936 LC III...............................................$259,345 ...............$7,200/Mo.

Ex-Rental Equipment 2012 Kawasaki 70TMV-2 E005115 .... $128,000

2012 Kobelco SK260HW w/ Logmax

2012 SK210LC E006029............... $173,000 SALE

2011 Waratah 622B E006179 .......$158,000

Kubota Clearance

2012 Kobelco SK210HW Bare Unit E006784 .......................................$169,000

2014 Kubota U55-4GA1 E012802 .......$71,900

Used Equipment Clearance

2014 Kubota BX1870-1 E013683 ..... $12,300

2011 CAT 297C Track Loader, 2,575 hrs.

E006790.................................... $460,000

2014 Kubota RTV-X1120D E012807.$14,530 2014 Kubota RTV-X1120D E012448. $14,900 2012 Kubota RTV400-H E010205 ...... $8,325

Remove Seized Pins Quickly & Easily Contact Us Today For More Information! Phone: 403.286.3649 | Cell: 403.804.4360

4304-10 Street N.E., Calgary, AB T2E 6K3

People you Trust

SAVE TIME AND MONEY

Reduces concrete and separates steel rebar quickly and easily.

2007 CAT 272C Skidsteer, 900hrs. ............

................................................. $38,000 2007 John Deere 1445 Mower .... $14,500 2010 SCAG 36" Mower. ................. $2,500 2013 Kubota GR2020G Mower.... $13,500 2006 IR SK116DK 84" Roller ............ $53,000

2013 Kubota RRV400CIR-A E012348. $9,375

2013 Kubota M8560HDCC12 E015323 ..................................................... $53,000

2014 Kubota RTV-X900W E012324. $13,700

2011 Kubota RTV900G9-H E011353 ..........................................................CALL

2014 Kubota RRV-X1120D E014262. $15,400

Continued on page 40

The Professional’s Choice for Gouging, Piercing & Cutting

................................................. $47,500

2014 Kubota RTV-X1120D E013167. $14,900

2014 Kubota BX25D-1 E014265....... $17,450

of the camera, air conditioning and lights can be customized through the keypad, and configurations can be saved for added

ERIZER CONCRETE PULV

2012 Kobelco SK210HW w/ Logmax

E006787................................. $408,000

lows operators to navigate through different settings on the 8-inch LCD monitor and activate machine functions in a safe and comfortable way. The functionality

Service you Deserve

Forestry Equipment

Kobelco

2014 Kubota BX2670-1 E013680 ..... $11,980

ture (ROPS) for increased operator safety. The spacious cab features large front and side windows for high visibility and ease of operation, and a wider entrance ensures improved access. A well-positioned pantograph windshield wiper provides the best possible coverage for the front window for comfortable and accurate operation in poor weather. An improved climate control system allows the operator to select the desired temperature and get to work. An industryleading air circulation and defrosting system speeds up the heating and cooling process for a more comfortable working environment. To further enhance controllability, these machines feature a keypad that al-

September 2015

2011 Kubota RTV1100CWXH E013666 .......................................................... CALL

ent Today

ttachm Own Or Rent Your A

DLE welcomes Kelly Scott

to our Senior management team in Surrey. “Kelly has over 35 years of experience in heavy equipment. His reputation and leadership make him a great addition to our company.”

ShearForce Hammers

Compactors Xcentric Rippers

The Best Tool for Excavating Rock, Concrete, and Frozen Ground!

RUBBLE MASTER

Crusher Buckets

Compact Crushing Equipment

Or phone for more information:

Surrey Toll Free 1.855.355.0109

Kamloops Quesnel Dawson Creek Toll Free Toll Free Toll Free 1.800.553.7482 1.855.991.0406 1.800.663.3572

DouglasLakeEquipment.com

Your Attachment Specialists

1.800.255.5211 • shearforce.ca

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 39

CASE AUTHORIZED DEALERS

We raised the bar on peace of mind.

ALBERTA

Rocky Mountain Equipment Calgary (403) 243-8600 Edmonton (780) 486-2273 Grande Prairie (780) 882-7637 Lethbridge (403) 327-3154 Medicine Hat (403) 528-3838 Red Deer (403) 341-4832 Taber (403) 223-2333

BRITISH COLUMBIA Parker Paciﬁc Campbell River Cranbrook Fort St. John Kamloops Langley Nanaimo Penticton Prince George Quesnel Vernon Williams Lake

(250) 287-8878 (250) 426-6205 (250) 785-6105 (250) 374-4406 (604) 607-8555 (250) 758-5288 (250) 492-3939 (250) 562-8171 (250) 992-7256 (250) 545-4424 (250) 392-7101

MANITOBA Hitrac Winnipeg

(204) 257-3000

NEW BRUNSWICK Maritime Case Hanwell

(506) 455-2380

NEWFOUNDLAND Madsen Construction Mount Pearl

(709) 747-7841

ONTARIO

J.R. Brisson Equipment Ottawa (613) 521-1910 Vars (613) 443-3300

FACTORY WA R R A N T Y *

Kucera Farm Supply Alvinston Tecumseh

(519) 898-2961 (519) 739-0503

Strongco LP Brampton Grimsby Kitchener London Pickering Thunder Bay

(905) 791-3131 (905) 643-4255 (519) 744-3518 (519) 652-3234 (905) 428-3808 (807) 475-3052

Tracks & Wheels Sault Ste. Marie Sudbury Timmins

(705) 256-5438 (705) 566-5438 (705) 268-5438

QUEBEC

FOR A LIMITED TIME... Get 3-yrs/3000-hrs of hassle-free, complete factory protection with every fuel-efﬁcient, high-performance Alpha Series skid steer and compact track loader. That’s an additional 24 months at no additional cost to you. Don’t wait. Offer ends December 31st.

CaseCE.com/3YearWarranty *The free 36 months or 3000 hours, whichever comes ﬁrst, includes the manufacturer’s base warranty period, plus an additional two years of manufacturer’s warranty. Offer valid June 1, 2015 through December 31, 2015 on the following new CASE skid steer loader and compact track loader models: SR130, SR150, SR160, SR175, SR200, SR210, SR220, SR240, SR250, SR270, SV185, SV250, SV280, SV300, TR270, TR310, TR320, TR340 and TV380. The precise protection afforded is subject to the terms, conditions and exclusions of the plan as issued. Programs may be changed or cancelled without notice. ©2015 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or afﬁliates.

Longus Equipment Laval Levis Sherbrooke Varennes

(450) 628-4866 (418) 836-2225 (819) 843-3555 (450) 652-2552

SASKATCHEWAN Redhead Equipment Estevan Lloydminster Melfort Prince Albert Regina Saskatoon Swift Current

(306) 634-4788 (306) 825-3434 (306) 752-2273 (306) 763-6454 (306) 721-2666 (306) 934-3555 (306) 773-2951

YUKON TERRITORY Parker Paciﬁc Whitehorse Yukon

(867) 668-2127

Page 40

Supply Post Western Canada Edition · supplypost.com

Continued from page 38

convenience. Bluetooth has also been added so the operator can connect to a phone with a single button. In addition, the windshield wipers, camera and an audio mute function can be assigned to a shortcut button located on the left joystick, so the operator can control the selected function by pressing a button.

A winning combination The ECR145E and ECR235E have been designed to provide the lowest total cost of ownership. A winning combination of enhanced hydraulics, improved ECO mode and convenient service access contributes to lower overall costs and higher productivity. An optimized hydrau-

lics system is combined with the fully electronic control system to improve controllability and response time. This system works in harmony with the exclusive Volvo ECO mode, which optimizes the hydraulic system to reduce flow and pressure losses resulting in lower fuel consumption. Punched anti-slip plates

and handrails ensure superior grip and added safety when performing maintenance checks and services. The ECR235E is further equipped with foldable guardrails to ensure safer access and ease of transportation. To improve machine serviceability, Volvo has designed both of these machines with grouped filters and centralized greas-

September 2015 ing points, accessible from ground level. CareTrack is the Volvo Construction Equipment telematics system which gives operators access to a wide range of machine monitoring information designed to save time and money. With CareTrack, operators can reduce fuel costs, optimize machine performance and proac-

Canada’s GREENESTWORKFORCE: Life’s Better When It’s An Adventure Exceptional Products For Exceptional Customers.

We're Launching Our NEW Line!

VAC PRODUCTS

 Hose And Fittings, Suction, Discharge, Petoleum, High Pressure Wash, Steam Hose, Concrete, Boom Hose, Grain Vac Hose, Hydraulic, Air & Chemical.  Batteries  Bulk Oil & Lubricants, Anti-Freeze  Oil & Fuel Additives, Greases, Penetrating & Lubricating Spray  Nozzles, Lances, Couplers, Rotary &, Jetting Nozzles, Wands, Extensions  Boilers, High Pressure Water Pumps  Brass & Dot Valves, Vacuum & Pressure Relief Valves  Blowers & Vacuum Pumps  Septic & Vacuum Trucks & Trailers 150 Gal -15 m 3  Dig Tubes, Extensions,Clamps, Reducers & Adapters.

Consignment Options available

CALL NOW! 1-855-539-1650 www.revolutionequipmentco.com revolutionequipment@sasktel.net

The Forest Products Association of Canada (FPAC) is pleased to announce the winners of this year’s summer 2015 Green Dream Internship program. Fifteen students are receiving a scholarship and an iPad mini to help them blog about their adventures as interns in Canada’s forest products industry. The blogs will be posted on TheGreenestWorkforce. ca, an online resource tool highlighting the future direction of the forest products industry and job opportunities available across the country. The Green Dream blogs give students the opportunity to share their adventures over the course of a four-month work placement in Canada’s forest products industry. Students from all walks of life, studying in various fields, from forestry, to accounting, to Human Resources, to Quality Control, to Mechanical and Chemical engineering and Helitack fire support have begun sharing their stories online. “The scholarship award given to this year’s 15 Green Dream Interns will go a long way toward supporting each student’s education and career aspirations within the forest products industry,” said David Lindsay, President and CEO of FPAC. “And, the blogs the students will

tively manage service and maintenance to maximize uptime. Operators can also stay connected via remote monitoring and experience new levels of control and efficiency. Real-time service alerts via CareTrack also help promote a good service and maintenance routine. b Source: Volvo

riety of employees who are working in the forest products industry and found their career in the sector because they were looking for an adventure, to make a difference, to feel valued, and to find a sense of control. Career opportunities in Administration, Science and Engineering, Woodlands, Skilled Trades and Mill Operations are open now across the country. Visit TheGreenestWorkforce.ca for more details. b

be writing over the summer will offer rich insight into the adventures young millennial get to experience in the sector.” “Reading first-hand accounts from peers about what it’s like living in northern Alberta, the Prairie Provinces, or along the coast of BC, will allow young jobseekers the ad- Source: FPAC/APFC vantage of getting to know about a place, a company, and a job in the forest products industry through the eyes of these young people living the Green Dream,” continued Lindsay. Under Vision2020, the forest products industry intends to hire 60,000 people by the end of the decade. Digital Edition The GreenestWorkforce.ca www.supplypost.com features stories from a va-

FRESH IN FoR DISmANtLINg DISmA

NtLIN

2006 JD 330 CLC EXCAVAtoR Call For Parts today!

1-800-340-1192 Sexsmith Used Farm Parts Ltd. Sexsmith, AB www.usedfarmparts.com E-mail: farmpart@telusplanet.net

Serving Quality Transportation Since 2003 > Lower Mainland > Forestry > Heavy Haul Hwy

T: 604-462-7030 | TF: 1-855-462-7030 | www.ridgelowbed.com

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

IBIS-Rover: A New Overview Over Open Pit Slope Monitoring IDS is pleased to present the latest member of the IBIS family of slope monitoring radar designed to improve safety within open pit mines. The IBIS-Rover maintains all the strength points of the others members of the family, providing realtime and all-weather measurements of mine wall movements with sub-millimetre accuracy. IBIS-Rover is therefore ideal for safety critical monitoring, with the added value of high mobility and fast deployment. It offers the following extra benefits: • Quick and easy one-man set up • Self-contained and fully integrated system

• Enlarged field of view of up to 270°, for wider coverage of specific slope geometry at short-range • These capabilities make of the IBIS-Rover an ideal tool for: • Open cut, long-wall operations • Multiple open pits where frequent relocation is required • When urgent active monitoring is required The IBIS-Rover is a valuable tool for coal strip mining, where short-range monitoring and fast deployment along the pit major axis is often required. Rapid installation enlarged coverage makes it ideal for multi-pit, shortrange monitoring, or quick focus on critical areas. As a member of the IBIS radar family, IBIS-Rover is a perfect tool to cover a wide range of spatial and temporal scale of instabilities. Wide area coverage and high spatial resolution, typical of IBIS technology, en- Source: Mining Tech

Caterpillar Calls TPA Passage A Significant Victory For Economic Growth Trade Promotion Authority (TPA), a critical tool long absent from United States trade negotiations, cleared its final hurdle June 24, before being sent to President Obama. Passing the Senate with bipartisan support, TPA is a linchpin that will provide U.S. trade negotiators with the strongest possible negotiating position as the U.S. seeks to expand trade with Eu-

rope, the Asia-Pacific Rim and developing countries. While Caterpillar played a leadership role in support of TPA, a key differencemaker was the engagement of Caterpillar employees. “Congressional passage of TPA marks a significant victory for supporters of trade and economic growth,” said Caterpillar Chairman and CEO Doug Oberhelman. “Caterpil-

HEAVY DUTY STEEL WORKBENCHES Built To Last! ■ ■ ■ ■ ■

2' Storage Professional Grade Unit Roller Bearing Drawer Guides 1 ⁄8” Steel Top, 16 Gauge Drawers Custom Designs, Any Length, Any Colour Bolt Storage, Welding Tables, Roller Benches 10' Stationary Bench

Made in Canada

sures detection of all types of slope movements, from sub-bench failures to large collapses. In addition, continuous data storage and processing capabilities permits to track the movement history from initial small deformations to rapid movements immediately preceding a slope failure. IBIS-Rover is fully integrated with the unique FPM360 Full Pit Monitoring platform and can be used in conjunction with long-range IBIS systems. The IBIS-Rover is designed to improve mine safety and productivity standards, with small power consumption (approximately 15 days of autonomous power), and the robustness and reliability typical of IBIS products. IBIS-Rover was presented during the annual User Day where guests had the opportunity to see it in action. During the next few weeks, visit the IDS website to see customer impressions and comments about past and new IBIS systems. b

ORDER TODAY!

www.diamondindustries.ca ■ 1-866-351-2471

lar has been a consistent, forceful voice for trade throughout our 90-year history; and we’re glad to see a bipartisan Congressional majority reaffirm that the U.S. is serious about increasing trade.” Caterpillar’s employees and suppliers demonstrated their understanding of how essential trade is to Caterpillar’s ability to grow and delivered that message to Washington. The Trans-Pacific Partnership, the Transatlantic Trade and Investment Partnership and other agreements create opportunities to enhance Caterpillar’s exports. During the past five years, Caterpillar has exported nearly $88 billion of products from the United States; during the same period more than half of the company’s U.S.-made products have been sold overseas. TPA, which has been provided to each president since Franklin Roosevelt, has lapsed since 2007. The bill will be sent to President Obama where it will await his signature. b Source: AED

Site C Project Benefits New resources are required to meet long-term electricity needs in B.C. BC Hydro’s long-term energy planning process has found that Site C provides the best combination of financial, technical, environmental and economic development attributes, compared to other electricity-generation options. The Site C project will provide key benefits for B.C., including energy, dependable capacity and flexibility, regional economic development, job creation, and benefits for communities and Aboriginal groups. Project Attributes: • Site C will provide 1,100 megawatts of capacity, and produce about 5,100 gigawatt hours of electricity each year — enough energy to power the equivalent of about 450,000 homes per year in B.C. • It will be a source of clean and renewable electricity for more than 100 years. • Site C will have among

Page 41 tribute $3.2 billion to provincial GDP, including approximately $130 million to regional GDP. • During construction, Site C will result in a total of $40 million in tax revenues to local governments and, once in operation, $2 million in revenue from grants-inlieu and school taxes. • Site C will be a source of affordable power to meet B.C.’s future electricity needs. Over the first 50 years of Site C’s project life, ratepayers will save an average of $650 to $900 million each year, compared to alternatives. b

the lowest GHG emissions, per gigawatt hour, compared to other resource options. • As the third project on the Peace River, Site C will rely on the existing Williston Reservoir for water storage. This means Site C will generate approximately 35 per cent of the energy produced at the W.A.C. Bennett Dam, with only five per cent of the reservoir area. • Site C will be among Source: Project Site C the most cost-effective resource options for BC Hydro ratepayers. • Site C will create approximately 10,000 person-years of direct employment during construction, and about 33,000 total person-years of employment through all stages of development and construction. • Construction will also provide significant opportunities for businesses of all sizes. • Construction will con-

Proud to be Alberta’s Exclusive TimberPro Dealer!

WHETHER IT’S FORESTRY, PIPELINE, UTILITY WORK OR BIOMASS OPERATIONS, TIMBERPRO HAS THE SOLUTION

EQUIPMENT FOR SALE

2005 Deere 270CLC QC, 2 buckets, thumb, 6200 hours .............................................. $105,000. 2007 Hyundai 290LC, QC, 2 buckets, thumb, 3000 hours .............................................$99,000. 2006 Case 240LC QC, 2 buckets, thumb, 4300 hours ................................................... $82,500. 2007 Hyundai 320LC, QC, 2 buckets, thumb, catwalks, 3000 hours ........................... $103,500. 2005 Deere 1270 Harvester w/like new LogMax 6000 Head (400 hours), tracks...... $315,000. 2001 Madill 2200B Feller Buncher, High Rotation Head, Ready to work.......................$85,000. 2002 Madill 2200B Feller Buncher, High Rotation Sawhead, Ready to work.................$89,000. 1976 Cat D7G, angle blade, tilts, ripper, cab, good condition........................................$30,000. 1997 Link Belt 3400 / Limmit 2000B delimber .............................................................$35,000. 1997 Timbco Clambunk Skidder, Tracks, 4300 original hours ........................................$125,000. 1999 Cat D6R LGP, cab, A/C, angle blade, tilts, ripper, 80% U/C .................................$95,000.

www.truenorthequipment.ca

1-780-722-8129

Page 42

Supply Post Western Canada Edition · supplypost.com

The Complete Cycle: Developing A Successful Equipment Acquisition, Management And Disposition Strategy We’ve all seen the gloomy headlines. You’ve had the painful conversations. Your customers want more done in less time at a reduced cost. With the arrival of this latest economic slump driven by falling oil prices and the accompanying belt-tightening, a fresh look at the big picture might be in order. Now could be the time to update your strategy regarding equipment acquisition, management and disposition, or as we’re labeling it here, the “complete cycle.” A carefully-tailored complete cycle strategy, one that examines all aspects of

equipment financing, ownership and operation, from initial purchase through to day-to-day management and eventual re-sale, could help you respond more effectively to today’s and tomorrow’s economic challenges while increasing fleet productivity and maximizing returns on future heavy equipment investments. As you ponder your complete cycle strategy, here are five things to consider: Dust off or develop your business plan Your heavy equipment acquisition, management and disposition strategy

must align with your business plan, which typically includes an honest assessment of the competitive environment, your organization’s strengths and weaknesses, revenue projections and short and long-term goals. Unless you know where your business is headed, you’ll likely be guessing about your equipment requirements. If you don’t have a business plan, now’s the time to develop one by searching online for business planning templates or seeking a consultant who specializes in your industry. Check out your professional industry association, like the

EXPERIENCE THE BANDIT DIFFERENCE! WE OFFER A FULL LINEUP OF CHIPPERS AND GRINDERS FOR: • Fire suppression • Silviculture • Biofuel • Right of way clearing • Land clearing • Municipal & tree service work

Roadbuilders or in the forestry sector, The Truck Loggers Association, for potential contacts or try LinkedIn to find a consultant. The key is to not go it alone because there are abundant resources available. Collect fleet data You may already have all of the latest sensors installed on your equipment, in which case you already have minute-by-minute updates on how and where your fleet’s being deployed or otherwise. Or you could be more typical; you’re someone who gets the job done and leaves data analysis to someone else in your office. Regardless, your product support rep should be able to help you identify overused or underused equipment, flag any major repairs in the offing, suggest options regarding maintenance practices and provide overall fleet analysis and recommendations. Many equipment dealers also offer operator training and resources to help determine the best replacement point that results in the lowest total cost over a machine’s life. You should also be able to access industry-focused sessions or utilize fleet management software to help you understand the optimum point to regenerate your fleet. In addition, these tools will help to get your equipment usage data, maintenance and repair records organized, important information

September 2015 when it comes to evaluating potential resale. Make informed decisions With data in hand, you’re ready to take a critical look at your fleet: Should you repair, rebuild, hold or unload? Consider offloading equipment when an older unit may not align with business coming in the door, it’s under-utilized, or a better machine is available, particularly in light of recent developments in telematics, fuel efficiency, connectivity, and online auction technol-

ogy. Sometimes you’ll find that a newer machine’s efficiency more than makes up for the investment over the long term. With online auctions, recouping a larger portion of your initial investment becomes a real possibility as the world becomes your marketplace. You’ll also want to confirm that your fleet is compliant with the regulatory environment and all safety and environmental standards within your jurisdiction. Continued on page 43

Energy:

Burn your used oil as FREE heat

Logic:

Choose the used oil heater that can pay for itself in two years or less!

Leasing le! Availab

Energy Logic used oil heaters and boilers: · most durable · easiest to maintain · industry’s best warranty · Canada’s Arctic Proven The highest quality and the lowest cost of ownership, Period. Find out more: www.energylogiccanada.com AVAILABLE THROUGH:

BLACK GOLD CANADA Ph: 250-562-8666 Toll Free: 1-800-663-8319 Fax: 250-563-4953 E-Mail: info@energylogiccanada.com 2266 S. Nicholson St. Prince George, BC V2N 1V8

Saratoga VentureS Ltd. 592 Lilac Cres., Campbell River, BC V9W 7G6 Phone: 250-286-3211 • Fax: 250-286-3284 svl@saratogaventures.com | www.saratogaventures.com

STRONG, DEPENDABLE BANDIT CHIPPERS FROM 4” TO 20” FOR ALL APPLICATIONS. CALL US TODAY TO SEE HOW WE CAN HELP YOU WITH YOUR PROJECT.

ALL BANDIT CHIPPERS ARE AVAILABLE ON A TRAILER OR TRACKS BANDIT OFFERS DISC AND DRUM CHIPPERS TO SUIT YOUR NEEDS.

(800) 665-CHIP (2447) | Langley, B.C.

mrchips@northlandchippers.com www.northlandchippers.com

Madill 123BC remanufactured August 2014. Please Call for price and more info.

EquipmEnT FOR saLE: • 1998 Freightliner FL60 shop Truck, equipped w/ V-mac underhood compressor, 265,000 km ..............$49,500 • 2002 Madill 3800C Log Loader, equipped w/ 70" piranha grapple.....................................................$87,500 • 1977 Madill 044 Grapple Yarder, Cummins KTA 1150, equipped w/ lines and grapple. ......................$85,000 • 1984 Madill 044 Grapple Yarder, single mainline machine w/ Detroit 12V71 rear mount turbo ....$45,000 • Imac Log Grapple to fit Komatsu WA450-2.........$4,500 • Weldco Beales Log Grapple to fit Cat 950E..........$4,500 • 1,000G Water Tank, w/ valving & hand rails ..... $3,500

1985 Cat 980C Wheel Loader $70,000.

dIsMAnTLInG for PArTs: • 1992 Kobelco sK300 Mark 2 Log Loader • (2) Pacific 30 Ton Log Trailers • 630A Prentice feller Buncher • Pacific P16 Log Truck and Trailer • Excavator Bkts • Madill Parts: 009, 044, 075 (rubber & Trk) • Madill 4800 Undercarriage • Clark Axle Components & Parts BD 71,000 & 91,000 • Cat rB325L Excavator • Moxy 6200 rock Truck • Terex 2566 rock Truck

WE SPECIALIZE IN USED PARTS & ATTACHMENTS FOR THE LOGGING INDUSTRY

TOLL FREE 1-888-668-1611

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers the transaction. The online auction channel is the quickest way to reach a targeted group of potential buyers and access to cash quickly. Seek out an online marketplace with experienced re-marketers who can showcase your equipment to thousands of interested global buyers each week, allowing you stay focused on your customers

and business. Optimize your inventory With machine data and a re-marketing plan in hand, now it’s time to consider what, if any, equipment you’ll want to acquire to achieve your business plan’s goals. Things to consider when looking adding to your fleet are the amount you’ll use the machine, the work ahead,

yanmar To Support The Japan Pavilion At Expo Milano 2015

Milan, Yanmar joins some of Japan’s leading enterprises, to help raise awareness of the various challenges and breakthroughs in the field of food production. Laying emphasis on the power of design and appealing to the audience with initiatives that herald the agriculture of the future, Yanmar assists in the promotion of Japan’s agriculture and the diversity of the Japanese cuisine. b

Continued from page 42

Wheel and deal Once you’ve elected to go ahead and prune your fleet, decisions depend on your goals. Can you be patient and wait for the best price or do you need the cash quickly? You can negotiate the sale yourself; a sometimes long and arduous process or you could turn to a broker to handle

Yanmar is proud to announce support of the Japan Pavilion at the Milano World Exposition, hosted by Italy’s second largest city from May 1 through October 31. Held under the topic of “Feeding the Planet, Energy for Life”, Expo Milano will be the home of over 140 countries and organizations, and an expected 20 million visitors over six months. The Japan Pavilion is based on the concept of “Harmonious Diversity” and will actively promote the country’s various undertakings in the domain

of food production, fisheries and forestry, highlighting Japan’s latest technology and know-how in food production, distribution, preservation and recycling. Actively involved in the domains of harnessing power and food production during over one hundred Source: Yanmar years since its establishment, Yanmar continues to provide the world markets with products and services of unrivalled quality, contributing to the realization of a sustainable society and a better future for all. At the Japan Pavilion in

and your financial forecast. These factors will help determine your approach to financing the acquisition and whether to rent, lease, purchase new or used. An emerging trend you may want to keep an eye on in the construction sector is the “sharing economy” where you can rent a unit that’s in between jobs from another contractor in your area. Whatever road you take in making an addition to your fleet, consider brand standardization. This makes it easier to

Page 43

train operators and maintenance personnel, as well as streamlines the parts supply chain. Should you elect to add to your fleet using an online auction, you’ll want to ensure that any pieces purchased online come with a guaranteed inspection report that includes plenty of detailed pictures and rates the condition of a machine. These types of reports leave no questions regarding configuration, condition and maintenance performed over the life of the unit, so that you can buy with con-

780-962-8586 ATTACHMENTS BLADES angle, straight, & U for all sizes RIPPERS single or multishank for all sizes WINCHES rebuilt, complete for all sizes

fidence. You’ll also want to take a look at technology upgrades, either through purchase of a newer machine or the many retrofit options available from your dealer. Ultimately, developing a complete cycle strategy is about managing your business so you’re a more reliable partner, someone your customers can count on to get more work done in less time – a perfect recipe for success in these challenging times. b Source: Iron Planet

EMAIL: CRAWLERSALES@TELUS.NET FAX: 780-962-9465 Edmonton, AB

PARTS

EQUIPMENT

NEW, USED & REBUILT PARTS & COMPONENTS

1978 D155A-1

KOMATSU 100 units dismantled

1995 D37E-5

CATERPILLAR 15 units dismantled

2005 D31EX-21

CARCO - PACCAR 75 winches dismantled

2004 D31PX-21

2004 242 SS

SUPERPAC 600P

ALLIED - HYSTER 75 winches dismantled

SUPERPAC 660P

WE KNOW THE CONDITIONS YOU WORK IN ARE DEMANDING; IT’S WHY WE MAKE EQUIPMENT THAT’S UP TO THE TASK.

TRACK TRENCHERS

FORESTRY TRACTORS

DRILL RIG SYSTEMS BRAMPTON OTTAWA LONDON

(800) 668-9065 (613) 298-9121 (855) 351-9866

CRAIGHURST ATLANTIC EDMONTON

(800) 668-9065 (902) 222-9679 (800) 809-5066

CALGARY GRANDE PRAIRIE SASKATOON

WWW.VERMEERCANADA.COM

(403) 216-1160 (780) 230-2000 (306) 382-3249

WINNIPEG THUNDER BAY LAVAL

(866) 548-1866 (807) 345-2705 (800) 990-7919

Page 44

Supply Post Western Canada Edition · supplypost.com

New Volvo EC160E Boosts Fuel Efficiency And Power The EC160E is the newest E-Series crawler excavator from Volvo Construction Equipment, and incorporates a powerful Tier 4 Final engine into a durable design, providing excellent fuel efficiency and a robust performance in tough applications. The new EC160E crawler excavator from Volvo Construction Equipment is designed with a range

of new features that boost fuel efficiency without sacrificing power. Incorporating a Volvo Tier 4 Final D4 engine, the EC160E boasts an 8-percent improvement in fuel efficiency, and 5-percent improvements in tractive force and engine power compared to previous-generation models. For further efficiency, the hydraulic system is optimized to operate in

SALES & RENTALS bill@skreenquip.com www.skreenquip.com

Finlay 312 4ft x 8ft Triple deck with wash bars on all 3 decks, 3” water hook up, Deutz engine, Belts very good, variable speed feeder with hopper and hyd. remote controlled grid, set up to run 3 hyd conveyors from the machine, 5th wheel hook up.

12 yard hopper with 50ft removable under conveyor, c/w weigh scale, electric drive air operated discharge gate onto belt.

CALL BILL - 604-671-1066

harmony with the engine, working alongside a fully electronic control system. The E-series crawler excavators come equipped with the Volvo advanced ECO mode, reducing power loss and improving controllability and response time. ECO mode works in tandem with the main control valve and machine software to ensure efficient electronic pump control. To reduce cycle time, a boom float function allows pump power from boom lowering to be transferred to other functions. The EC160E further improves efficient operations by reducing the amount of time the machine is idling. The optional Automatic Engine Shutoff feature can intuitively power off the engine when the machine is inactive for a pre-set amount of time. “Improvements to cab design, fuel efficiency and power on the EC160E all contribute toward achieving a lower operating cost for the owner and higher productivity and comfort for the operator,” said Matt McLean, Product Manager – Excavators, with Volvo Construction Equipment. Tough and ready A reinforced steel rollover protection structure (ROPS) offers maximum protection for the operator, and the durable undercarriage is built to withstand all elements and terrain. An intelligently designed Xshape lower frame enables even weight distribution at all times. The robust boom and arm design includes internal plates positioned to support pressure points

We’re working on our next issue! Finlay Hydrasander sand dewaterer 80 - 100 YPH hydraulic drive, good condition.

during a range of applications, dispersing stress from high-pressure areas to ensure maximum productivity during the most demanding of applications. The Volvo Lifetime Frame and Structure Warranty ensures the boom, arm and frame will be covered under warranty for as long as the initial owner keeps the machine. An easy ride The EC160E offers a superior operator experience, including a comfortable, productive working environment and easy serviceability. All machine interfaces, including joysticks, keypad and large LCD monitor, are ergonomically designed for ease of use and optimum efficiency. The number of switches has been reduced and cli-

September 2015 mate control has been integrated into the keypad for easy adjustments. A shortcut key has been added to the joystick to allow the operator to select functions such as windshield wipers, cameras and auto-mute during the operation for minimum disruption. The Volvo-integrated work mode system allows operators to simply choose the optimal mode for the task at hand, optimizing fuel efficiency and machine performance. The emergency engine stop is located at the base of the seat, so the operator can reach the switch from both the seat and the ground in the event of an emergency. These features provide the operator with more control over the machine, allowing easy adaptation to the job-

site environment. For enhanced safety, an optional side-view camera can be installed on these machines to cover the operator blind spot. The sideview camera can work in conjunction with the standard rear-view camera so that both views are simultaneously displayed on the colour monitor, creating enhanced visibility and a safer working environment. The EC160E is also designed for hassle-free servicing. Access to the hydraulic and fuel tanks is convenient, and filters are grouped together and accessible from ground level. Well-positioned punched anti-slip plates provide superior grip and durability for easier, safer access Continued on page 45

CALL :780-455-3343 info@edgeequipment.com FINE WORKING MACHINES MAKE YOU MONEY.

WORK READY

CALL TODAY

AD DEADLINE: Sept. 18, 2015 5:00 pm

Finlay 303 Portable screening machine 3 onboard conveyors hyd. fold for transport, 4ft x 8ft double deck with finger screens, variable speed feeder belt, hyd. remote controlled tipping grid, Deutz engine, belts in fair condition, 5th wheel hook up.

www.skreenquip.com

12704 149 St. Edmonton, AB, T5V 1B3

www.edgeequipment.com

September 2015 Continued from page 44

when cleaning. The radiator, charged air cooler and hydraulic oil cooler are easily accessed from ground level by simply opening the side door. Real-time service alerts are displayed on the

Supply Post Western Canada Edition · Our Readers Are Your Buyers colour monitor to enable speedy diagnostic. With Volvo CareTrack telematics, which comes standard, the owner and fleet manager can remotely monitor a wide range of machine diagnostics, as well as ma-

Government Of Canada Investment Establishes Trades Training Program The Honourable KerryLynne D. Findlay, Minister of National Revenue and Member of Parliament for Delta – Richmond East, on behalf of the Honourable Michelle Rempel, Minister of State for Western Economic Diversification, announced a $990,000 investment to the British Columbia Institute of Technology (BCIT) to establish a Heavy Duty Equipment Operator program. Funding, provided through the Western Diversification Program, will allow BCIT to provide a fundamental operator course through the acquisition of simulators and accessory training equipment. The Heavy Duty Equipment Operator program will also offer foundation and apprenticeship programs to assist students with transition into the workplace. This program will be offered at the Motive

Page 45

chine location in real time. Switch it up The EC160E has been built to maximize productivity and profitability by adapting to a wide range of tasks. The machine can accommodate a multitude of

hydraulic attachments, as Volvo excavators are factory fitted with a breaker, sheer piping, as well as rotator piping. The password-protected management system stores information for up to 20

investment in this project will help the British Columbia Institute of Technology to directly deliver skills training in our region and to rural and Aboriginal communities across the province. Our support for this program will ensure that students are prepared to enter the workforce and meet the needs of our growing economy.” – The Honourable KerryLynne Findlay, Minister of State for National Revenue and Member of Parliament for Delta – Richmond East “BCIT is proud of our state-of-the-art facilities and equipment that provides students with access to the widest variety of training aids available. This important investment allows students the opportunity to hone critical skills in a safe environment so that they can be better prepared for gaining experience on real industrial equipment in the next phase of their training” – Guy Ellis, Dean, BCIT School of Transportation. b

Komatsu Builds New Factory For Hydraulic Excavators In India

Power Centre of Excellence at BCIT’s Annacis Island campus. This funding also supports the development of a mobile training program that will provide heavy duty equipment operator training to Aboriginal and rural communities throughout British Columbia with the purchase of a mobile training unit. Both of these programs will be fully certified by the B.C. Industry Training Authority. Quick Facts • Heavy duty equipment operators are employed by construction companies, heavy duty contractors, public works departments and pipeline, mining, logging and cargo-handling companies. • The heavy duty equipment operator sector employs over 10,000 British Columbians. Quotes “Our Government’s Source: BCIT

Komatsu Ltd. held the opening ceremony of a new factory for hydraulic excavators at Komatsu India Pvt. Ltd. (KIPL) in Chennai, India on May 8.Komatsu used to produce hydraulic excavators at L&TKomatsu Limited (LTK), a joint-venture company with Larsen & Tourbro Limited (L&T), a leading general contractor of India. In April 2013, Komatsu sold its equity in LTK to L&T, proactively dissolving the joint-venture agreement. Since FY2013, Komatsu has been responsible for the development and production of Komatsu products made in India, while L&T has handled sales and service of those products in terms of the separation of operations. Practically, however, both parties agreed that Komatsu would consign the production of Komatsu hydraulic excavators

different attachments. The pressures and hydraulic flows can be adjusted within the cab, which enables the use of various attachments for increased versatility. A proportional electric pedal offers precise

control and the attachment response sensitivity can be adjusted using the keypad for maximum impact in different environments. Durable Volvo attachments have been purposeContinued on page 46

high-quality products to customers in, not only India, but also the Middle East and Africa in the future. With this new factory, Komatsu is going to build up more flexible global production and supply operations and further sharpen its global competitiveness. • Source: Komatsu • [Outline of Komatsu India Pvt. Ltd.] • Name: Komatsu India Pvt. Ltd. • Established: 2006 • Headquartered: Chennai, India • Representative: Kiyoshi Mizuhara • Line of business: Manufacture, sale and service of construction and mining equipment • No. of employees: About 400 persons • [Outline of the new factory for hydraulic excavators at KIPL] • Invested: JPY3.4 billion • Models of production: 7 to 45-ton classes of hydraulic excavators • Production capacity: 2,500 units/year (possible to increase to 3,000 units/year) b

to L&T for the time being and steadily consolidate their production at Komatsu. In addition to its factory for dump trucks, Komatsu has recently built a new factory for hydraulic excavators at KIPL, an overseas subsidiary of Komatsu, and, since April 2015, has begun to steadily transfer the production of five models of hydraulic excavators from LTCEL (formerly LTK), a subsidiary of L&T, with whom Komatsu consigned the production. Komatsu believes that India is one of the leading markets with promising growth in the mid to long term for construction equipment and regards its business in India in a long-range perspective. Komatsu positions this new factory for hydraulic excavators in Chennai as a core manufacturing site to deliver Source: AED

Value Parts is your number one choice in North America for quality new, used and rebuilt industrial equipment parts. We specialize in John Deere and Hitachi, but also have access to parts inventories for Caterpillar, Timberjack, Bomag, Ditch Witch and many more makes.

currently Wrecking

We are currently wrecking a Deere 744H Wheel Loader s/n DW744HX580150+. Cab, Axles, Cylinders, Boom, Rims and Engine are all in good condition. Also has a 5.5 cu yd pin-on Craig bucket.

DismantleD John Deere 330C LC 330LC 270D LC 270LC 230LC 200LC 2054 992E 892E 790E 790D 690E 693D

653G 744H 744E 644G 644E 644C 544H 544G 444E 344H 848G 748G-III 748G-II 748G 748E

648G 710B 410G 310SE 310D 772CH 770CH 772BH 770BH 770A 300D ADT 750C-II 280-II SL

hitachi EX330-5 EX300-3 EX270-5 EX270L

YOUR EQUIPMENT WORKING IS OUR #1 JOB Travelers is uniquely suited to help you get the equipment you need, whatever your situation is. > > > >

All assets New or Used Flexible Term Lease or Financing

> > > >

Low or no down Industry leading rates Simple application Fast decisions

Andrew David | 604-671-5432 | adavid@travelersfinancial.com

For more information call toll free

1-877-685-4886

E-mail: usedparts@brandt.ca Inventory: brandt.ca eBay Store: valueparts.ca

Call Andrew David today EQUIPMENT FINANCE

WWW.TRAVELERSFINANCIAL.COM

Page 46

Supply Post Western Canada Edition · supplypost.com

Continued from page 45

built to work in perfect harmony with these machines. These attachments include Volvo GP, HD and XD buckets — the perfect tools for digging and re-handling in all conditions — and the

Pin Lock technology, compliant with the latest safety regulations of ISO 13031 and EN474-1 and designed to fit perfectly with Volvo equipment. b

HB-18 hydraulic breaker, optimized to the specific weight of the machines and tailored to Volvo’s quick couplers for swift and easy attachment changes. Volvo offers a full range of quick couplers featuring Front

UNRESERVED INDUSTRIAL AUCTION

ThuRsdAY sEPTEMbER 3 Rd, 2015 • calgary, ALbERTA

2006 CATERPILLAR 14H VHP

2013 JOHN DEERE 60D

2000 JOHN DEERE 330CL

2012 JOHN DEERE 850J WLT

CATERPILLAR 277B

JOHN DEERE 790D

2005 CASE 580M 4X4

(3) 2013 JOHN DEERE 244J

(2) 2010 KENWORTH T800B

2007 VOLVO VHD 200

2012 MACK CXU613 DAY CAB

2009 INTERNATIONAL 7400

2006 INTERNATIONAL REFUSE

2005 KENWORTH T800B

(3) VOHL DV-1104-D

INDUSTRIAL INTeRNeT bIDDINg AvAILAbLe

to PARtICIPAtE IN tHIS AUCtIoN CALL oNE of oUR CALgARy CoNtACtS: w wayne orsten Dave MacDonald

403-333-5908 403-371-3709

403-226-0405

South West AB/BC (Ind) Central Alberta (Ind)

Jesse Michener Don Dixon

New Volvo EC220E Offers Best-In-Class Efficiency

Source: Volvo

PRELIMINARY NOTICE

2013 VOLVO VHD

September 2015

587-777-7868 403-333-0101

www.maauctions.com

South East AB/SK (Auto/Ind) Corporate Sales

1-877-811-8855

The Volvo EC220E crawler excavator builds on the strong reputation of the previous D-Series model with reduced emissions and fuel consumption, as well as enhanced power and productivity. The 22-ton Volvo EC220E is the newest excavator from Volvo Construction Equipment and is fitted with a top-range Tier 4 Final Volvo D6 engine that meets strict emissions legislation across North America without compromising on power. The fully optimized hydraulics system and ECO mode deliver the precise amount of power required to complete the task in hand, while the auto engine shutdown feature helps further reduce fuel consumption and emissions by switching off after the excavator has been inactive for a pre-set amount of time. The increased pump input power on the Volvo EC220E enables highly responsive operation for greater productivity and cycle times — and with the boom float function, the pump power normally used for boom lowering can be saved or used for other functions, also reducing cycle times.

The new valve controls the boom operation proportionally according to the arm operation while grading. This system also improves lifting controllability while traveling simultaneously. When grading, the operator is now capable of maintaining the bucket teeth parallel to the ground even in H mode during the entire cycle. Fuel efficiency has been improved from previous model by 5 percent. “The combination of our improved fuel efficiency and overall machine durability gives our customers greater uptime and ultimately increased productivity throughout the

total lifetime of their equipment,” said Rob Palermo, product manager excavators, Volvo Construction Equipment. Custom comfort A comfortable operator is a productive operator, which is why the new Volvo EC220E places comfort at the heart of its design. The HMI (human machine interface) — including the joysticks, keypad and easyto-read 8-inch LCD monitor — are ergonomically designed and can be finetuned according to operator preference. The number of switches has also been reduced and the climate control integrated into the keypad for effortless adjustment. For added convenience, functions such as the windshield wipers, cameras and auto-mute can all be assigned a shortcut button on the joystick. This allows the operator to Continued on page 47

7419-40 St. NE. Calgary, AB T3J 4H2 “We Own What We Advertise”

2007 CATERPILLAR 740 Good running machines, seven to choose from. $137,000 / Unit

1996 D6 LGP $65,000

1999 CATERPILLAR D-400E Good machines, seven to choose from. $68,000 / Unit

2002 and 2003 VOLVO EC210BLC Good condition, approx. 6,000 hrs/unit. $75,000 OBO / Unit

2010 CAT CS-56 SMOOTH DRUM ROLLER (84” DRUM) 2,000 hours, A/C. $128,000 (Padfoot shell kit available with scraper bar for an additional $12,000)

TEL: (403) 293-2904 FAX: (403) 293-1524

sales@diggerrentals.com

www.diggerrentals.ca

September 2015 Continued from page 46

select a function mid-job without disruption. For the safety of both the operator and site staff, the 22-ton model from Volvo now also includes an optional side view camera in addition to the rear-view camera to cover the visual blind spots. Both views are displayed on the colour monitor. The cab is ROPS and ISO Standard-compliant, to ensure the operator is fully protected in the unlikely event of the excavator rolling over. Built to last The Volvo EC220E is not just a highly productive machine in the short term; rather the machine is engineered to continue working hard over a long service life. Operating in tough conditions means that every component matters — Volvo pays careful attention to every detail during the product design and manufacturing processes. Silicone caulking is used to prevent rust, while waterproof harnesses and connections come as standard. The design also incorporates heavyduty door hinges and bolt-on protection for the

Supply Post Western Canada Edition · Our Readers Are Your Buyers framework lights. The X-shape lower frame enables even weight distribution for increased stability and durability and helps prevent damage from rocks and debris. The heavy-duty undercarriage likewise creates excellent tractive force in demanding terrain. The robust design of the boom and arm includes internal plates positioned to support pressure points during a wide range of applications. These plates help disperse pressure to ensure maximum productivity and uptime from the excavator — time after time. Volvo stands behind the quality of its excavators with standards born from decades of experience, both in the field and in the lab, and hundreds of hours of computer simulations, delivering unsurpassed frame and structure longevity and durability. The unwavering confidence in product integrity is now being passed to customers through a lifetime warranty on the boom, arm and frame. Easy to inspect

In order to guarantee a long service life — and maximum uptime — regular service inspections are required to spot any potential problems before they occur. The Volvo EC220E excavator makes daily

Page 47

service checks quick and easy to carry out thanks to grouped filters that are easily accessible from ground level. Operators can easily access the single-layer cooling system from ground level by simply

opening the side door. The radiator charged air cooler and hydraulic oil cooler are situated side-by-side to maximize efficiency, reduce blockages and aid cleaning. Should a technician or operator need to ac-

cess the superstructure for inspection or maintenance, full size guard rails help maintain three-point contact at all times, while wellpositioned, punched and removable anti-slip plates

JCB Rolls Out Master Technician Program To NA Dealerships

rapidly changing technology, some of which can be quite advanced. The Master Tech Program training structure will also result in the highest levels of service people possible. Most importantly, it will give our service technicians a means to recognize their accomplishments.” All those who successfully complete the Master Technician Program earn the special Master Technician designation. They then compete annually in a competition where the best performing Master Technician in each of JCB’s 12 regions earns a special “Master Technician Ring” to acknowledge their expertise. “Service technicians are often the unsung heroes of a dealership, yet they are vital to its success and support of the JCB brand, that’s why we are proud to introduce this prestigious

program to honour those technicians who represent the best of the best in our North American dealer network”, says Chris Giorgianni, JCB Vice President of Product Support and Government & Defence. b

JCB has recently introduced the ‘Master Technician’ program to all dealerships in the North American network. The Master Technician program is designed to continue to build the skills of JCB Service Technicians and recognize technicians that are at the top of their class. To be considered for the program, service personnel must be nominated by their dealership and pass an entry exam. Once those qualifications have been met, participants must pass a series of training programs and hands on skill challenges at 100%, as well as all distance learning class-

es, JCB systems efficiency testing, Core Product Component Testing and other service based tests to earn the designation of Master Technician. Rick Papalia, Senior Vice President of Corporate Operations for Northland JCB states, “We feel it is very important for any technician to understand all training opportunities that are available, and how they can continue to learn and grow with the company and advance their career. Not only does it provide an opportunity to expand their understanding of the product, but it helps them to keep up with

Continued on page 50

Source: JCB

1-800-960-9939

CALL US TOLL FREE Fax: 403-946-5191 • Email: info@tyalta.com • Head Ofﬁce: Crossﬁeld, AB, 403-946-4860 18 CUBIC YARD FEEDER 36" to 42" Discharge, Adjustable Grizzly, Hydraulic Grizzly and Hydraulic Tilt.

2015 MCCLOSKEY J50 V2 50" x 29" Single Toggle Jaw With Heavier Flywheels And Optimization. Class-Leading With The Highest Stockpile In Its Category.

2014 MCCLOSKEY 36" x 80" Conveyor w/Hyd.Axle Jacks & Ext., Hyd. Raise & Lower, Hyd. Top Fold & Landing, Road Legal w/Air Brakes & Lights, Diesel or Electric.

GREAT NEW AND USED INVENTORY! 621 MCCLOSKEY TROMMEL SCREENER Perfect for Topsoil, Compost, Sand, Removable Drum for Screen Change, Great Condition Used Unit Shown!

J40 MCCLOSKEY JAW CRUSHER 40" x 24" Jaw Opening, Remote Control Track Mobility, New or Used Available.

R155 & R230 MCCLOSKEY SCREENERS Great Unit for Heavy Duty Applications, Use Punchplate, Fingers or Bofar Bars, New & Used Units Available.

MCCLOSKEY C38R CONE CRUSHER Self Contained Closed Circuit Plant W/ Screendeck. Pairs Perfectly With An S Series Screener. Available For Sale Or Rental.

2015 36x100 DIRECT FEED STACKING CONVEYOR With Hydraulic Folding V-Bin, Comes Standard With Hydraulic Landing Gear And Hydraulic Top Fold, Cat Diesel Engine.

TYALTA GRIZZLY Handles Heavy Duty Rip Rap Material, Adjustable Grizzly Bars 3" to 24" Spacing, Easily Transported with a Loader.

SALES & RENTALS • SCREENERS • CONVEYORS • CRUSHERS • AGGREGATE EQUIPMENT In House Financing now available! Flexible terms and conditions. Call Tyalta Finance today at 1-877-550-0016 finance@tyalta.com

www.tyalta.com

Page 48

Supply Post Western Canada Edition · supplypost.com

September 2015

2006 CASE 430

1998 BOBCAT 863

2011 NEW HOLLAND C232

2013 CASE SV300

PRICE $19,500 OPTIONS: E/ 2911 HRS, CAB, HEATER, AIR CONDITIONING, FRNT ELEC POWER PLUG, HYDRAULIC COUPLER, RIDE CONTROL, BEACON/STROBE

PRICE $21,900 OPTIONS: E/ 1790 HRS, CAB, MANUAL COUPLER, BACKHOE ATTACHMENT, REAR STABILIZERS

PRICE $39,500 OPTIONS: E/ 1862 HRS, CAB, HEATER, AIR CONDITIONING, E-H CONTROLS, HYDRAULIC COUPLER, 78” SMOOTH BUCKET, TWO SPEED

PRICE $39,500 OPTIONS: E/ 1319 HRS, 2 SPEED EH CONTROLS, 12X16.5 TIRES, 72” SMOOTH BUCKET, PERF.W/FRNT ELECTRIC, RIDE CONTROL

CALGARY

Stk#100932

MEDICINE HAT

Stk#102073

Stk#099758

CALGARY

Stk#094942

CALGARY

2012 CASE SR220

2011 BOBCAT T770

2006 HITACHI 270LC

2007 HITACHI ZX350LC

PRICE $43,500 OPTIONS: E/ 430 HRS, 2 SPEED MECH CONTROL, 12X16.5 TIRES, 72” TOOTH BUCKET, PERF.W/FRNT ELECTRIC, HYDRAULIC COUPLER

PRICE $54,000 OPTIONS: E/ 1780 HRS, E-H CONTROLS, 80” SMOOTH BUCKET, 17.7” NEW TRACKS, ENCLOSED CAB-HEAT/ AC, FRONT ELECTRICS, HYD COUPLER

PRICE $60,000 OPTIONS: E/ 8700 HRS, 72” TWIST BUCKET

PRICE $104,500 OPTIONS: E/ 9610 HRS, MANUAL COUPLER, DIG BUCKET, PLUMBED FOR TWIST, NEW UNDERCARRIAGE

CALGARY

Stk#091682

CALGARY

Stk#088708

Stk#096952

TABER

Stk#086691

TABER

2011 CASE 521EXR

2010 CASE 721E

2012 CASE 721F

PRICE $117,500 OPTIONS: E/ 1792 HRS, NO ATTACHMENTS

PRICE $130,000 OPTIONS: E/ 3402 HRS, NO ATTACHMENTS

PRICE $130,000 OPTIONS: E/ 3500 HRS, NO ATTACHMENTS

PRICE $135,000 OPTIONS: E/ 4410 HRS, 3.5 YD BUCKET, FEEDLOT BKT W/ GRAPP

LETHBRIDGE

Stk#097604

CALGARY

Stk#096949

Stk#096950

TABER

Stk#096951

TABER

2012 KAWASAKI 115ZV-2

2012 CASE CX350C

2011 CASE CX470B

2012 CASE CX470B

PRICE $350,000 OPTIONS: , CAB WITH HEAT & A/C, 8.3 YD BUCKET W/ TEETH & SEGMENTS, 35/65-33 TIRES

PRICE $165,000 OPTIONS: E/ 5142 HRS, DOUBLE ACT AUX HYD, MANUAL COUPLER, CTRL PATT SELECTOR, TWIST BUCKET, 10’ 8” ARM

PRICE $178,000 OPTIONS: E/ 7455 HRS, HYDRAULIC COUPLER, CTRL PATT SELECTOR, CATWALKS, 96” BUCKET

PRICE $329,900 OPTIONS: E/ 30 HRS, 22’11” BOOM, 11’1” STANDARD ARM, 30” (750MM) STEEL SHOES, ROPS CAB WITH HEAT & A/C, COUPLER, 48” DIGGING BUCKET

EDMONTON

Stk#099729

CALGARY

Stk#098977

MORE UNITS, MORE PICTURES, MORE INFO AT

CALGARY

RED DEER T 403.341.4832

Stk#099379

EDMONTON T 780.486.2273

EDMONTON

MEDICINE HAT T 403.528.3838

Stk#054886

LETHBRIDGE T 403.327.3154

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 49

EDMONTON METSO 12720 - 149 ST N.W.

1-844-77-METSO

STK# 018459Q NEW FABTEC 30X50 CONVEYOR 350 fpm belt speed, up to 600 tph, work ready, available for rent

STK# 019371Q NEW FABTEC WASH PLANT Metso FS303 6x20 triple deck, Eagle 44x32 double screw, three axle carrier, 14 bar wash system, airlined discharge chute, under-screen hopper

$33,000 CALGARY

EDMONTON METSO

STK# 060207 USED MASABA 36X125 RADIAL STACKER switch gear, power travel, hydraulic axle jacks, hydraulic axle extend, work ready, available for rent

$300,500 CALGARY

$916,000

STK# 068415 NEW METSO 6X20 SCREEN PLANT Metso FS303 6x20 three deck screener, feeder screen plant, 8x13 hopper, tandem walking beam, HD suspension 16 wheel, brake & light package

$145,000 CALGARY

CALGARY

STK# 057040 NEW METSO HP500 IOC PLANT Metso HP500 cone crusher, Tri-trunion axle, 48” discharge, 42” feed conveyor, in & out setup, HD tandem walking beam w/ booster axle suspension

STK# 068416 NEW METSO 7X20 SCREEN PLANT Metso FS353 screener triple deck horizontal screener, overhead feed conveyor, three cross conveyors, tri-axle chassis

$370,000 EDMONTON METSO

STK# 078882 USED MASABA 36X100 RADIAL STACKER self-contained, optional blending bin, hydraulic lift and drive, single fold, Caterpillar C4.4 97hp engine

STK# 083259 MASABA 42X225 PORTABLE CONVEYOR Two 70ft slides, 225 foot continuous belt.

$177,000 EDMONTON METSO

CALGARY

STK# 083260 NEW METSO HP400 IOC PLANT Metso HP400 cone crusher, in and out configuration, tandem 16 wheel walking beam, 36” feed and 42” discharge, hydraulic lifting jacks

$CALL

NEW METSO HP300 IOC PLANT Metso HP300 cone crusher, in and out configuration, 36” feed and 42” discharge, hydraulic levelling jacks, HD three axle suspension

NEW METSO C106 JAW PLANT Metso C106 28x42 jaw crusher, Metso FS302 6x20 double deck scalper screen, tri-axle 24 wheel suspension, 13’ discharge height, 42” discharge conveyor

$640,000

EDMONTON METSO

STK# 083886

$760,000 EDMONTON METSO

EDMONTON METSO

$370,000

STK# 085174 USED METSO HP300 IOC PLANT refurbished 2001 Metso HP300 cone, in and out setup, switch gear included, tri-axle suspension, Fabtec chassis

$750,000 EDMONTON METSO

NEW METSO LOKOTRACK LT300HP CONE CRUSHER

EDMONTON METSO

STK#

$440,000

086015

E/ 38 HRS, Metso HP300 track-mounted cone crusher, 10 cu yd feed hopper, standard medium liner, engine pre-heater, interlocking cable, Caterpillar tier 3 C15 engine.

METSOPARTS@ROCKYMTN.COM

CHEE CHIK

METSOSALES@ROCKYMTN.COM

780-222-3590

METSOSERVICE@ROCKYMTN.COM

BRIAN JERRED

403-826-1759

Page 50

Supply Post Western Canada Edition · supplypost.com

Continued from page 47

offer good grip. CareTrack is the Volvo Construction Equipment telematics system which gives operators access to a wide range of machine monitoring information

designed to save time and money. With CareTrack, operators can reduce fuel costs, optimize machine performance and proactively manage service and maintenance to maximize uptime. Operators can also

stay connected via remote monitoring and experience new levels of control and efficiency. Volvo’s realtime service alerts via CareTrack also help promote a good service and maintenance routine. Diagnostic

OFF HIGHWAY www.GEARCENTRE-OFFHWY.com

check alerts are displayed on the colour monitor for the engine oil filter, the fuel-water separator, the hydraulic oil and the hydraulic oil filter. Mix-and-match attachments In addition to the machine’s durability and ease of maintenance, the sheer versatility of the EC220E ensures maximum uptime and productivity. The excavator can be adjusted to take a wide variety of hydraulic lines, which are factory fitted with breaker and shear piping (X1), as well as rotator piping (X3). These state-of-the-art auxiliary lines provide the correct flow and pressure for special attachments such as mowers and grinders, shears, crushers and tilt rotators. Additionally, a complete line of Volvo attachments is available, including buckets and hydraulic hammers, which are designed to meet a full range of applications. A password-protected attachment management system has pre-sets and permits hydraulic flow and pressure to be adjusted (set or memorized) for up to 20 different attachments. The response sensitivity can be adjusted using the keypad, allowing the operator to tailor machine response for maximum impact in different environments. b

September 2015

How To Build A Steel Building At The End Of The World In August, 2014, Enrique López signed a contract with the Chilean branch of Allied Steel Buildings. He purchased two warehouses that would be located almost at the farthest most of South of the American continent known as the world’s end. Here, old sail-

ing and steam vessels went around the Cape Horn for centuries, where both, the Pacific, and the Atlantic Ocean meet to create the roughest seas before reaching Antarctica. Enrique’s company, Transportes López, was Continued on page 51

16 X 5 Tracked Screen

Surrey, BC

Tel: 604-866-0482

NORSTONE EXCAVATING

GL AMOROUS?

not so much

Source: Volvo

AB/SK /MB 6124 - 111 Ave., Edmonton, AB

Willie Thompson 780.474.8082

Darcy Brennan 587.873.9554

BC Hugh Porter 604.657.7167

COOL FACTOR? of f the char ts

Sandvik QS331 S Type Portable Mobile Tracked Cone Crusher

Working with excavators isn’t all that glamorous, but attach an HKX hydraulic kit to one and their coolness factor goes off the charts!

90% LARGER FEED SIZE THAN STANDARD CONES

The advanced CS430 cone is equipped with a hydroset CSS regulation system that provides overload protection, optimizes production and keeps track of liner wear. The unit is also fitted with an automatic level sensor above the crushing chamber to control the feed rate and minimize operator intervention for maximum production and reduction.

C9 Cat 350 HP diesel - Automated System · Feed Magnet - Tracked Cone Feed Reductions - 14"to 1½" - 12" to 1" - 10" to ¾"

 Standard kits for a wide variety of attachments  Latest in attachment control technology  Kits ship within 1 - 5 days—ground or air

Lowering operating costs, less equipment, higher performance. The QS331 is the ideal solution.

AVAILABLE FOR SALE OR RENT

www.chieftainequipment.com

Don’t take our word for it. Try it yourself.

call +1 800.493.5487 or 360.805.8600 www.HKX.com/SPP

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Brokers Brush Up Knowledge In Reducing Workplace Incidents On Friday, July 24, CMB Insurance Brokers held their annual Summer Olympics team building event. Intact Insurance participated in the day’s event which started with a visit to AMTA’s Centre of Excellence in Edmonton to learn more about the strides the trucking industry takes to ensure safety and how AMTA is the “go to” resource for first-class safety and compliance support. “Trucking is one of CMB’s specialties,” said CMB Insurance President, Ben McDonald. “Our visit was specifically designed to showcase how AMTA can help our transportation clients succeed by providing training programs and promoting safety initiatives to reduce workplace injuries. A highlight of the visit was spending time using the new AMTA driving simulator. It is a fantastic tool that transportation companies can use to improve driver behaviour.” “We were pleased to provide an overview of the wide range of tools

AMTA has available that positively influence workplace safety and prevention,” said AMTA Executive Director Lorraine Card. “Between 2012 – 2015, the trucking industry rate groups serviced by AMTA saw a significant decrease in injuries.” “Fleets rely upon AMTA training and services to achieve their safety targets. We remain committed to helping even more industry members meet their safety goals and value partnerships with the insurance industry.” Edmonton Kenworth hosted part two of the day. The team was pleased to learn about the unique purposes and abilities of different models of trucks. The day wrapped up in networking and team building activities. “We believe that education is one of the most important tools for success that we can provide to our team,” said Ben. “It was great to learn from experts in the field.” b Source: AMTA

• WE NOW HAVE A TRACK MACHINE FOR YOUR UNDERCARRIAGE SWAPS • VOLVO PARTS NOW AVAILABLE • NEW & USED PARTS FOR ALL MAKES & MODELS • REBUILT COMPONENTS AVAILABLE

Kamloops, BC.

Large to small, we can do it all!

FOR SALE: • • • • •

Attachments of all types for rent & purchase!

D6D Winch, DAT Blade, Carco Winch Wrecking CAT D9H 4 BBL Ripper encl. cab, angled blade Wrecking CAT 740 2008 Sterling / Dodge Service Truck with 3000 lb hyd. crane, will seperate service body from truck 6.7 auto ........POR Use your Smarts, • (1) 3306 Good Runner trust B&G Parts! • (1) Isuzu Engine, Good Runner • Crown WRTT20 telescopic picker GRAHAM: 250-851-1100

250-573-4181 (Office/Fax) | bgparts@telus.net

Power to go...

BIG! 1911-214D Supply Post 9.75x2.0833 BW.indd 1

Power to go...

BIGGER!

Continued from page 50

created in 1998, and they specialize in cargo transport. For more than one year, their food supply business for the fish farming industry had been rising, and they needed to increase their warehouse space as quickly as possible. The first of them was going to be installed in Punta Arenas, half a mile off the coast of the Strait of Magellan, while the second identical one, would be installed in Puerto Natales, a city located 247 km (153 mi) lying northwest of Punta Arenas. The exact location is near Torres del Paine National

Park, designated a World Biosphere Reserve by UNESCO in 1978. Both buildings were fabricated by Allied in the USA and exported at the Port of Houston. The shipment took three weeks, and arrived on site the 4th of November, in the middle of the Chilean Summer. In the southernmost part of the South American continent, the warm season lasts from November 21 to March 16 with an average daily high temperature above 54°F and very strong winds. Among Chileans, Punta Arenas is known for its strong winds up to 130 km/ hour. During the summer,

ed blowing. Around 8.30 a.m., they switched tasks and worked at ground level the rest of the day to avoid risks, ensure health and safety for the team, and guarantee an optimal construction output for the building. In only 18 days, the first 1,200 square meters steel warehouse was completed and ready to be used. Currently, the second steel building is on site and ready for construction. Allied’s certified construction team started its erection in Puerto Natales the end of July, 2015. b Source: Allied

UPCOMING AUCTIONS

Working Harder For You!

Edmonton, August 27th:

Heavy Equipment & Transportation Edmonton Location: 3-26302 Twp. Rd 531A, Acheson Park, AB T7X 5A5

Montreal, September 17th:

Heavy Equipment & Transportation Montreal Location: 2141 rang Charlotte, Saint-Simon-de-Bagot, QC J0H 1Y0

the winds are so strong that city officials put up ropes between buildings in the downtown area to assist pedestrians with managing the strong downdrafts created in the zone. The construction of the first steel warehouse located in Punta Arenas started the 10th of December and was completed by the 28th of the same month under extreme weather conditions. To be able to deal with the 120 km/hour winds, Allied’s certified construction team started their daily journey at 4 a.m. They worked on the steel building erection until 8.30 a.m., before the wind start-

Page 51

National Online, September 11th:

Marine & Recreational Auction Pre-Bidding Starts September 9th

National Online, October 29th:

Agricultural Auction Pre-Bidding Starts October 27th

Visit AeroAuctions.ca for full details or call 1-866-375-6109 Power to go...

BIGGEST!

Small projects to large facilities, Sommers rental generator systems deliver the power you need, when you need it. • Mobile & skid-based systems up to 1 MW • Canada’s largest privately held inventory in stock • On call 24/7 anywhere in Ontario

Call the Power Line at

1.800.690.2396

www.sommersgen.com 2015-01-29 10:49 AM

Page 52

Supply Post Western Canada Edition · supplypost.com

Shell to Sell Stake In tongyi Lubricants Shell has signed an agreement to sell its 75% stake in Tongyi Lubricants in China to Huo’s Group and The Carlyle Group. The transaction is expected to complete by late 2015 or early 2016, subject to regulatory approvals. Tongyi, a joint venture between Shell and Huo’s Group, is a prominent Chinese lubricant supplier with blending plants in Beijing, Xianyang of Shaanxi province and Wuxi of Jiangsu province. Shell acquired its 75% stake from Huo’s Group

“OUR OPERATORS ARE USED TO YELLOW MACHINES. BUT THEY GOT OVER THAT WHEN THEY GOT INSIDE AND THEY FELT THE POWER.”

September 2015

CASe Launches “Labour of Love Music Festival” CASE Construction Equipment will host the “Labour of Love Music Festival” starring multiplatinum country music star Kip Moore on Labour Day (Monday, Sept. 7, 2015) at Racine Festival Park in Wisconsin on the city’s waterfront. A donation from the event will be made to Wounded Warrior Project, and the event will focus on the importance of hiring veterans into skilled jobs in the manufacturing and construction industries. State and local bands, including Bella Cain and Run Carolina, will open for Moore, and additional performances and events will take place throughout the day. The Veterans Outreach Centre of Wisconsin will be hosting a 50/50 raffle to raise money for local veterans. CASE will have equipment on display, and bring in a taste of Racine with local food and retail vendors throughout the festival. A ceremony honouring veter-

ent and our veterans may be our greatest resource,” says Jim Hasler, vice president – North America, CASE Construction Equipment. “‘Labour of Love’ is all about making that connection and helping veterans take that next step in their professional lives.” This is the second Labour Day event CASE has partnered on with Kip Moore. The singer released a song through CASE in 2014 dedicated to the men and women of the construction industry titled “On the Case”. b

ans, their service and their contributions to the American workforce will take place at 3:00 PM. Kip Moore will perform at 6:00 PM. For more information on the festival, visit CaseCE.com/ LabourOfLove. Tickets went on sale Tuesday, August 4 at 10:00 AM CST through Ticketmaster – all kids 10 and under are free. “Labour Day is the perfect time to honour pride Source: AED and dignity in work, and there may be no group that represents that more than the men and women of the armed services,” says Moore. “It’s my honour to pay tribute to these people, and all the hard-working people that come out to my shows, and to give back to a community that has been very supportive of me.” “There is a very real skilled Labour shortage in America today, from welders and machinists to heavy equipment technicians and operators. It’s important we help develop that next generation of tal-

DON’T GET STUNG BY THE COMPETITION! CUSTOM HEAVY ATTACHMENT MANUFACTURING, RENTALS & REPAIRS! Ralph DiGiorgio, owner – DiGiorgio & Messina Construction Co. Middleton, MA

Go online to see why Ralph runs Doosan.

DoosanEquipment.com/Ralph11

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2015 Doosan Infracore Construction Equipment America. All rights reserved. | 0815428

Authorized Doosan Dealers

ALBERTA

BRITISH COLUMBIA

SASKATCHEWAN

Brown’s Industrial

Rentco Equipment, Ltd.

Bobcat of Regina, Ltd.

780-826-2399

250-785-1197 • 855-785-1197 www.doosanofthepeace.ca

306-347-7600

www.bobcatofregina.com

Lift Boss, Inc.

Westerra Equipment, LP Abbotsford

403-301-0041

604-850-7313 • 800-563-7313

Earthworks Equipment Corporation

www.westerraequipment.com

306-931-7880

Cold Laked

www.brownsequipmentsales.com

Calgary

www.liftboss.ca

Lift Boss, Inc.

Fort St. John

MANITOBA

Edmonton

AGCON Equipment

www.liftboss.ca

204-255-4772

780-474-9900

Rentco Equipment, Ltd. Grande Prairie

780-538-0791 • 855-538-0791 www.doosanofthepeace.ca

Springfield

www.agconequipment.com

NORTHWEST TERRITORIES

Regina

Saskatoon

doosan.kubotaofsaskatoon.com

YUKON

Bobcat of Whitehorse Whitehorse

867-633-4426

www.macphersonrentals.com

Ron’s Auto Service, Ltd. Yellowknife

867-766-6025

locations.where2getit.com/doosan/ NT/YELLOWKNIFE/47603/

0815428 TestimonialDigiorgio_SP-W_4-812x8-583_Sept_A2.indd #43209 Supply Post - West • 4-color • 4.812” X 8.583” • September 2015 • 8.13.15

250-573-2748

OIL FIELD PRODUCTS • EXCAVATORS • WHEEL LOADERS • SKID STEERS Shale Augers Bins Dryers Gensets Fops Guarding Mat Grapples Pallet Forks Pipe Handlers Pipe Pole Grapples Power Clams Quick Changes Rippers Spoons Thumbs Snow blades

STUMPERS

CUSTOM DECKS

MAT GRAPPLES

MOUNDING RAKES

ALL AVAILABLE FOR RENT THROUGH RUSH RENTALS LTD.!

TYSEAMFG@HOTMAIL.COM | WWW.TYSEAMFG.COM

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

ADS Opens New Distribution Centre In British Columbia Advanced Drainage Systems, Inc. (ADS), (NYSE: WMS), a leading global manufacturer of water management products and solutions for non-residential, residential, infrastructure and agricultural applications has opened a new distribution centre in Abbotsford, British Columbia. The Abbotsford location, the company’s first in British Columbia and ninth

in Canada, will increase the local supply of the company’s products and improve customer service. “The need for storm water drainage products continues to grow in many applications and in many regions,” said Bob Klein, Executive Vice President, Sales for ADS. “This new yard is another example of our commitment to having local inventory to meet our Source: Advanced Drainage

BCIT Now Offers Specific Training For Industrial Electricians Industrial electricians are employed throughout BC. They typically work in the pulp and paper industry, lumber mills, utility plants, manufacturing industries, and in the resource extraction and processing sectors. These industries are experiencing rapid growth and, as a result, industrial electricians are in high demand.

a curriculum more in line with an industrial environment. BCIT has also developed a program that will permit “laddering” between the Industrial and Construction apprenticeship programs, provided students fulfill the workplace requirements. BCIT is offering the Industrial Electrician program in response to demand from industry stakeholders and will work with employers to ensure the program satisfies their training requirements. b

The Industrial Electrician program is a four-year apprenticeship that contains a 10-week technical training session in each of the four years. Industrial Electrical Apprentices complete the same Level 1 and Level 2 curriculum as those in the Construction Electrician Apprenticeship. However Levels 3 and 4 have been revised to reflect Source: BCIT

Atlas Copco’s Climate Goals Noted At UN Conference Atlas Copco, a provider of sustainable productivity solutions, is being recognized by the United Nations at the agency’s major conference on climate change for the group’s goals to cut carbon dioxide from its products and operations. The UN is hosted its Business and Climate Summit in Paris, France the week of May 18, a unique forum for business and government leaders to demonstrate innovative and ambitious strategies for climate change. This summit plays an important role ahead of the UN Climate Change Conference in December 2015 because it will identify solutions with potential for global impact and forward-looking strategies needed for effective change. Atlas Copco’s

customers’ water management needs wherever they might need it.” ADS water management solutions are used in a diverse range of construction projects, including streets and highways, non-residential, residential and industrial projects, golf courses, athletic fields and other construction projects. The company’s more than 3,800 employees support a network of 61 manufacturing locations and 29 distribution centres in strategic locations across the globe. b

pressors to run only at the speed necessary, cutting energy consumption. In 2013, Atlas Copco launched the patented VSD+ technology, which cuts energy use by more than half compared with traditional compressors. Another example is within the Group’s road construction equipment, where the new rollers cut fuel consumption and CO2emissions by ensuring that only the amount of power necessary at any given point is used. Earlier this year, Atlas Copco was recognized as one of the world’s most sustainable companies in the annual Global 100 list. The list, presented at the World Economic Forum in Davos, Switzerland, ranks companies that prove they are increasing productivity while using less resources. Atlas Copco is ranked 23rd overall, up from 46th last year, and is number one in the machinery industry. b

goals to impact emissions through innovative energy-efficient products as well as by decreasing the footprint of its operations are now being recognized by the UN. “A small carbon footprint is the sign of big innovation, and the biggest impact we can make is by creating energyefficient products,” said Mala Chakraborti, Atlas Copco’s vice president Corporate Responsibility. “We are honoured that the UN is highlighting our environmental targets which drive our business, create operational excellence and reduce the impact on the environment.” Atlas Copco’s innovative, energy-saving products include its variable-speed compressors, a technology that the group pioneered in 1994 that enables com- Source: AED

CNH Industrial’s Plant Achieves Silver Designation In World Class Manufacturing The plant achieved success during a recent audit by independent, trained auditors at the company’s only Canadian plant, located in Saskatchewan. The facility produces agricultural equipment for the Case IH and New Holland brands. The CNH Industrial N.V. plant in Saskatoon, Saskatchewan, has been awarded silver status for implementing World Class Manufacturing (WCM), one of the highest standards in the world for the integrated management of manufacturing plants and processes. The Canadian plant, which produces equipment for the company’s agricultural equipment brands, Case IH and New Holland Agriculture, is the first North American CNH Industrial facility to receive a silver WCM designation. Following an audit

Page 53 Class Manufacturing program. All of our employees in Saskatoon should be commended for their strong commitment and achievement in making CNH Industrial’s plants among the best in the world.” WCM is a system based on continuous improvement, designed to eliminate waste and loss from the production process. This integrated model for managing all elements of an organization focuses on improving the efficiency of a company’s technical and organizational components while maximizing market competitiveness. The widespread use of WCM principles at CNH Industrial plants allows the entire company, totalling some 69,000 employees across 190 countries, to share a common culture based on efficient processes and on a language universally recognized across all plants and countries in which CNH Industrial operates. b

by independent, trained auditors on May 14-15, the Saskatoon plant earned the silver award for achieving production process excellence and for the deep knowledge of WCM demonstrated by employees throughout the facility and especially on the shop floor. The facility earned the status just seven years after initially implementing the WCM program, which measures technical and managerial standards, including safety, cost, environment, quality, and process. “This is a great honour as our company is committed to achieving the highest standards in production in North America and around the world,” said Bret Lieberman, vice president of Manufacturing, CNH Industrial North America. “Employee involvement is a vital aspect of any successful World Source: AED

ALLIED’S RAMMER HYDRAULIC HAMMERS C2-19325 94th Avenue Surrey, BC V4N 4E6

are one of North America’s best-known and most respected hammer brands. Available in four hammer “families”, Allied’s Rammer hammers are unsurpassed in innovation and reliability. To put a high performance Allied Rammer hammer on your machine, call Van-Ed Equipment.

www.vanedequipment.com rick@vanedequipment.com

Tel: 604-888-9020 • 1-877-255-9293 • Fax: 604-888-9028

Allied_VanEd_QTR_pg_ad.indd 1

8/18/15 9:27 AM

Page 54

Supply Post Western Canada Edition · supplypost.com

September 2015

M&M Crane Hire Take Two More Terex Cranes Family-run M&M Mobile Crane Hire Ltd headquartered in Uxbridge with depots in Slough and Welwyn Garden City, has taken delivery of two Terex AC 40/2L all-terrain cranes. They replace two Terex City cranes purchased in 2003 and 2004, and are part of an on-going investment programme. In the 40 tonne capacity class, the AC 40/2L is one of the most popular Terex cranes. It has a boom length of 37.4 metres and a

maximum system length of 45.4 metres. “We decided to do the double primarily because of the AC 40/2L’s 37 metre fully powered boom,” says Managing Director, Brian Tierney. “We also liked the compactness of the crane combined with its low headroom.” “It will be available for general duties anywhere in the UK and we fully expect it to enjoy a high utilization rate,” he continues and adds: “The decision process was also helped Souce: Terex

Manitou Group Manufactures Its 500,000th Machine In 2015!

WHERE FARMERS MEET

This year marks the milestone of the 500,000th machine manufactured by the MANITOU Group. With its three brands, MANITOU, GEHL, and MUSTANG, and more than 400 models offered throughout the world, the Group celebrates this as an expression of its leadership in the all-terrain material-handling and dirt-engaging markets. The MANITOU Group designs, manufactures, distributes and supports equipment for the construction, agriculture and industrial markets. It specializes in telescopic handlers, all-terrain fork-

by the fact that we have always enjoyed a good working relationship with Terex. Since 2000 when we invested in our first Terex crane, our two companies have worked together in a positive and constructive way.” Terex Cranes Senior Manager in the UK and Ireland, Julia Dyer, comments: “We have always appreciated our healthy relationship with M&M - in particular their openness and practical approach. So much so, they have been invited to join, and are involved in, the company’s product development programme”. b

“500,001” and “500,002” customized machines will be on display. The Gehl “500,001” RT175 GEN: 2 track loader and the Mustang “500,002” 1900R skid loader have been painted with a ‘reverse’ colour scheme in honour of this half-million milestone. The customized Gehl “500,001” track loader and Mustang “500,002” skid steer loader will then travel from Wisconsin to Europe, debuting at Agritechnica in Hanover, Germany November 10-14, 2015. They will be paired with a ‘special edition’ Manitou MLT 735 also created for the 500,000th celebration, which began in Ancenis, France in early March. b

lifts, skid steers, track loaders, articulated loaders, semi-industrial and industrial masted forklifts, access platforms, truck-mounted forklifts, and attachments. As a leader in the Agricultural market, Manitou Americas will announce the celebration of the Manitou Group’s 500,000th machine at various summer trade shows; Empire Farm Days in Seneca Falls, NY; Ag Progress Days in Pennsylvania Furnace, PA; and Wisconsin Farm Tech Days in Sun Prairie, Wisconsin. For the occasion, the Souce: Manitou

SPECIALIZING IN NEW & USED UNDERCARRIAGE PARTS EQUIPMENT RENTALS & REPAIRS 594 Chilcotin Road, Kamloops, BC V2H 1G5 • • • • • • • • •

TRACK PRESS FACILITY, IDLER REBUILDING

EQUIPMENT FOR RENT OR SALE

2015 Komatsu PC170LC-10, 2 buckets, thumb, cab guard, New Machine! 2012 Komatsu PC200LC-8, 2 bkts, thumb Q/C, exc. cond., 1,700 hrs. 2007 Komatsu PC200LC-8,, 2 bkts, thumb, Q/C, cab guard, new cond., 850 hrs. Komatsu PC95R-2, 2 bkts, Q/C, thumb and blade. 2006 Dynapac CA362D, 84” smooth drum, A/C, 1,800 hrs, like new. Bomag BW211D-3, 84" smooth drum packer, excellent condition. Bomag BW177 DH-3, 66" smoothRENTED drum packer, excellent condition. Komatsu D65EX-12, angle dozer, sweeps/guarding, winch, new U/C. Dresser TD8E, 6-way blade, sweeps, ripper or winch available.

FOR R ENT

2007 Cat 330 DL,

Excellent condition, 2 bkts, thumb, catwalks & cabguard.

USED UNDERCARRIAGE

www.OutdoorFarmShow.com 1-800-563-5441 Canada’s Outdoor Farm Show

info@outdoorfarmshow.com @outdoorfarmshow @canadasoutdoorfarmshow

• • • • • • •

D7G TGAs, 24" ESS, Turned, 65% D7G/H S/F & D/F Rollers (82) 34" D7G Track Pads, 85% Rem. TD20G/D85E TGAs, 24" ESS, Turned, 65% Rem. D6C S/F & D/F Rollers Tigercat 870 TGAs, 24” Pads JD903G, 24" Pads

• EX400/JD370C Rails, Btm. Rollers • Cat 330 U/C TGA’S 28” 2 Bar Pads, Rails 90% Rem., Bottom Rollers, Rock Guards, Idlers, Track Adj’s & Spring Assemblies • Cat 330 28" 2 Bar Pads (Full Set) • Cat 325 28” 2 Bar Pads (Full Set) • EX200LC/PC200LC TGA, 28” 2 Bar Pads, Turned, 80% Rem. • EX60-5 Rollers & Idlers 75% Rem

• 200 Size Hyd. Thumb ATTACHMENTS • TD 15C Logging Arch • Winches, Arches & Rippers

• ZX200 Stick & Bucket Cylinder • 300 Size Cat Ho-Pac

Phone: (250) 374-5054 Fax: (250) 374-5126 EVES: Regan Zurowski (250) 579-2636 • Chad Zurowski (250) 851-3694

classifieds

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

to place an ad, call 1-800-663-4802 or visit www.supplypost.com attachments “Follow Me” Wobbly Wheel for Cat 140-G or Cat 140-H or John Deere 772. Excellent condition. $9,000 OBO. Surrey, BC. phone: (604) 834-0492 Brand new Cat 140-H Multi Shank Ripper. $12,000. Surrey, BC. phone: (604) 834-0492

MB-L200 crushing bucket. Setup to be mounted onto a skid steer, high flow hydraulics needed. Can be setup with additional brackets for a front-end loader, backhoe, or excavator. $18,500. Brentwood Bay, BC. phone: (250) 361-7473

price. Sidney, MB. brooke@wurtzbros.com www.wurtzbros.com Phone: (204) 466-2824

Crush It! Own or Rent. vanedequipment.com Phone: (604) 888-9020 Phone: (877) 255-9293

backhoes 2003 Case 580 Super M, 4 diesel, Ext-A-Hoe, 4x4, 4-in-1. $36,000. phone: (604) 253-8523

buckets Cat Hydraulic Q/C and Cat T R K ATTA C HMENTS Case 580 Extendahoe & Cat 416/420E, F thumbs in stock. Hydraulic - $2,650. Manual - $1,975. Made in Canada. Nationwide delivery, $188. www.trkattach.ca or phone: (905) 641-9981

4 cu. yd Q/C Bucket w/ BOE to fit 950G or H loader. Very good condition. $6,750 OBO. Call or text for more info. phone: (250) 371-1498 Can’t find what you are looking for? Thousands of

New ripper (140M) $9,500. more machines and equipment for sale on: Calgary, AB. www.supplypost.com phone: (403) 291-1010

TimberTools For Sale W624 rebuilt ......... $115,000. W622B rebuilt ....... $105,000. 622W rebuilt ...........$83,000. 620W rebuilt ...........$68,000. W622B used ............$49,000. Processor Computer Kits, Falling Heads, Machines and Processors

Call: 877-682-6337

september 2015 · page 55

International TD25, 2 spd steering clutches, Carco Atlas Copco 508 rotary J0120 winch, new batterscrew compressor, 50 hp ies. Runs well, good underLuxury 52 man Camp! C/w Siemens, 240/460V motor. carriage. $18,500. Kitimat, desalination system, A/C, Ideal for small business! BC. phone: (250) 896-1056 incineration, heli-pad, inter- Cost $35,000 new; asking 1995 Industrial Shop ideal net throughout and TVs in $7,995 OBO. Kelowna, BC. Crushing Equip. for equipment or fabrica- all rooms. For sale or lease phone: (250) 861-1150 tion facility. $10,000/mo. with full service catering conveyors Kamloops, BC. available. Located on the phone: (250) 319-2131 600’ of 36” channel conveyWest coast of B.C. or. 40’ sections only, no belt, burners phone: (604) 269-2002 no legs. Call for pricing. Mobile incinerators. steve - aggtech www.abcdestructor.com phone: (604) 857-3107 phone: (604) 240-1111 Gravel crusher, Cedar Telsmith 2080’ 30” steel R a p i d s , J a w & R o l l s . businesses conveyor, 20’ section, FMC $80,000 OBO. Revelstoke, rollers, 2 drive systems, BC. Profitable hydro-vac, vac brakes and gravity take-up. phone: (250) 837-3428 & sewer truck sales busi$50/foot. ness. Needs new location For all your crushing steve - aggtech and expansion. Owner equipment requirements. phone: (604) 857-3107 retiring. Serious inquiries Sales, service and parts only. Edmonton, AB. New & used conveyors, sales@hydrovacsun mormak equipment from 20’ to 120’, radial or limited.com phone: (250) 542-7350 transfer conveyors, quick vernon, B.C. Well-established Sand & Winterized Mobile Mining delivery. Gravel Operation for sale, Dry with 5 private show- tyalta industries inc. Can’t find what you are serving Kamloops and looking for? Thousands of phone: 1-800-960-9939 area. Includes approx. 80 ers, 30 man clean side more machines and equipacres / 2 titles with permit- and dirty side with change cranes ment for sale on: ted gravel pit, inventory rooms and washroom. www.supplypost.com 2 0 0 3 G r o v e R T 7 6 0 E and equipment. Serious silverdryminingsystems. inquiries only. Kamloops, com Crane available for sale or dozers BC. contract. Osoyoos, BC. gravelpit4sale@gmail.com DOZER-IHC TD25C, dozer sales@deckrane.com compactors with angle blade. $25,000. phone: (250) 535-4029 Can’t find what you are DOZER-IHC TD15B, dozer looking for? Thousands of crawlers more machines and equipc/w angle blade & winch, ment for sale on: brand new tracks. $15000. www.supplypost.com C HIP BLADE , 2 8 y d 3 c/w eyes to fit Cat D8 w/ camps hydraulic cyl. $12,000. Self-contained 10 man and BRUSH RAKE to fit IHC15 man camps for lease. ALLIED HO-PAC SALE 15B, $3,000. Ladysmith, 50 man camp also avail- **ONLY $4,900** with flat BC. able. Dry rental or catered. top, hoses and QC’s flow 1977 Caterpillar D6C bull- phone: (250) 758-4172 mike: (250) 949-1561 control / sealed bearings / dozer with logging arch, Advertise your machines Advertise your machines 18 gpm to fit your 4-10 ton winch, clearing blade, in the classifieds! Call in the classifieds! Call Michelle for deadline and carrier. Limited quantities. d i r t b l a d e . $ 1 5 , 0 0 0 . Michelle for deadline and Call Van-Ed. Pemberton, BC. rates. rates. phone: (604) 888-9020 phone: (604) 698-8137 Call: 1-800-663-4802 Call: 1-800-663-4802

buildings

Buckets for sale. Call for

Page 55

EXCAVATORS & STREET SWEEPER FOR SALE: 2003 PELICAN S SWEEPER, John Deere diesel. Good brooms & elevator. Auto grease. Ready to work! .................. $19,900 2004 HITACHI ZX 330-LC, Catwalks, John Deere / Cat switch, 2 buckets, HYD/QC. 13,300 hours .................................. $75,000 2007 HITACHI 350 LC-3 Catwalks, John Deere/Cat switch, 2 buckets, HYD/QC. Recent repairs. 9,500 hours...........$110,000

CALL: (604) 626-1360

compressors

Bob’s Diesel Repairs 10718 Seaton Rd., Winfield, BC

Phone: 250-766-3833 Diesel Generator Sets - 30 kW to 150 kW Units

• 3406 Cat 200 kW, 12 Lead • Cummins 230kW, 12 Lead SOLD • John Deere 175 kW, 12 Lead • Cummins 175kW, 12 Lead • Rebuilt Cat 3304 Diesel Engine • Rebuilt Cummins 8.3 Engine • Rebuilt Cat 3406B • Used Cummins 6CT 8.3 • Used Detroit 6V92T Cummins, Cat, Detroit Diesel Repairs

Page 56

Supply Post Western Canada Edition · supplypost.com

September 2015

3066 Cat Mitsubishi. Broken crank, good core. New 3 LOAD BANKS, 375 kVa, ejection pump. $3,500. 450 volt Bedard Gerard. Kamloops, BC. Ex-government. $1,000 terratim1@gmail.com each OBO. Calgary, AB. mike: (250) 320-1871 phone: (403) 237-8575 Cat 3306 DITA, engine 1978 Caterpillar D8K employment complete $4,000 OBO. dozer, needs complete Inside Sales Position avail- Castlegar, BC. engine. Brand new U/C, tilt able at Van-Ed Equipment! phone: (250) 365-3014 angle blade, partially dis- Construction equipment Low hr DD15 engine, 560 mantled. $29,000. Sidney, i ndust r y exper ience a hp. $14,000. Houston, BC. must. Please email resume MB. phone: (250) 845-2212 to sales@vanedequipment. brooke@wurtzbros.com com. Large inventory of used Phone: (604) 888-9020 and rebuilt Detroit Diesel, www.wurtzbros.com Cat, Cummins, Perkins, Phone: (204) 466-2824 ENGINES Deutz and Volvo engines. Prince George Truck & Equipment phone: 1-800-946-9400 or (250) 561-1234

electrical

Equipment For Sale 1993 CAT 950F BUCKET MACH. ......... $47000 CAT 980B BUCKET MACHINE C/W 3RD VALVE ... .......................................................... $22,900

Wheel Loader Attachments BUCKET WA250 108” LIGHT MATERIAL .....por BUCKET 78” CASE 850 NEW ................ $1200 BUCKET 107” SLIP IN ........................... $2000 BUCKET 950 ........................................ $2500 BUCKET 950 G/H ................................ $4750 COUPLER 950 G/H ................................ $4750 FORKS 950 G/H – WBM Q/A .................. $6000 3-966F WBM GRAPPLES ............. $2500/each 1-966C WBM GRAPPLES......................... $750

Dozer Attachments BLADE D7G UDOZER ............................. $4500 BLADE D8K UDOZER ............................. $6000 RAKE D8K ............................................. $4500

Excavator Attachments BUCKET ID 50D-38” CLEAN-UP............ $1500 BUCKET CAT 36” DIG WBM Q/A ........... $3200 BUCKET 330 – 46” DIG Q/A................... $3500 BUCKET 160 – 30” CWS NEW Q/A ........ $2300 BUCKET 325 - 66” WBM Q/A................. $2500 BUCKET 325 – 66” FAS Q/A .................. $3500 BUCKET 300 – 42” DAEQUIP Q/A .......... $3900 BUCKET 330 – 73” ML Q/A .................. $3000 BUCKET 330 – 72” ACCURATE Q/A........ $3000 BUCKET EL300 -48” WBM .................... $1500 BUCKET 300 – 42” WBM ...................... $4800 BUCKET 330 – 72” WBM....................... $3500 BUCKET 330 – 72” WAJAX .................... $3500 BRUSH RAKE 200 – 60” Q/A SOLD $3500

Miscellaneous 950G REAR AXLE COMPLETE ROLLOUT... caLL 966F REAR AXLE COMPLETE ROLLOUT ... caLL CAT 3304DI ENGINE ............................ $6500 CAT 3306DI ENGINE .............................. $8500 966F LIFT CYLS – TAKE OFFS .............. $1500 966C LIFT CYL ............. SOLD ...... $1250 936 BOOM ............................................ $2000 950 BOOM ........................................... $1500 JD2154 TRACK TENSIONERS ............... $1200 23.5 – 25 L5 TIRE ................................. $600 29.5 X 29 TIRES ............................ $500/each JD 2454/2554 LOG LOADER BOOM & STICK .. ............................................................. $6500 CAT 3306 LONG BLOCK .......................... caLL

We SeLL: replacement parts For caterpillar. Undercarriage, engines & Transmissions, Grader Wear parts, Boom pins & Bushings, Bucket Teeth & cutting edges

CORY 250-320-4070

cory@hdpartsltd.com

MERLIN 250-819-4444

merlin@hdpartsltd.com

2005 D3G LGP, well maintained. 7,000 hrs. 50% U/C major PM completed & 1987 Freightliner lowbed, rebuilt engine, new clutch, fresh inspection and major rebuild done over last 3 years incl. all tires. Will sell separate, but dozer must go first. Dozer $55,000 or $85,000 for both. Surrey, BC. edhamson@gmail.com phone: (604) 306-2558

JORDEF ENTERPRISES LTD.

(250) 319-4421

excavators

AuTOmOTIvE EquIPmENT FOR SALE:

2008 Dodge Ram 1500 Quad Cab, 4x4, Ser. # 1D7HU18208J224447, good condition, c/w 2-way and satellite radios ............................. $10,000. LOGGING EquIPmENT FOR SALE:

2007 John Deere 850J Dozer (High HP model), c/w enclosed cab with A/C, 6-way blade and ripper, Ser. # TO850Jx150115 ..................................... $195,000. 2006 Kobelco SK290 Excavator, c/w hydraulic thumb, 2 buckets, Ser. # LB04U595 ............ $90,000. 2007 John Deere 2054 Processor, Ser. # FF2054X200626, c/w 622B Waratah processing head, Ser. # 622260 ....................... $95,000. 2013 John Deere 753J Feller Buncher, Ser. # 1TO753JXCDC242847 .................................... $325,000.

For information, call:

(250) 319-4421 or email:

dgrankin@shaw.ca

Rebuilt 3408 Cat Engine. Dyno tested for 500 HP. $26,500. OBO. Sherwood Park, AB. phone: (708) 914-9052 troylundy@live.com 2003 Cat C15-550 rebuilt. $45,000. Prince George, BC. phone: (250) 562-8086

2004 John Deere 270CLC Excavator. 5,200 hours Excellent shape. Brand new undercarriage. Heavy duty guarding. Forestry cab. $125,000. Salmo, BC. phone: (250) 357-2545

• 1985 Cat 988B - c/w quick change, bucket, forks and stiff boom. Front tires 100%, rear 60%, 2 spares at 0% c/w rims, 1 spare at 50-60% no rim. Runs and in great shape, never used as a loader ................... $65,000 • 10,000 lb LiftKing forklift. Runs, but needs tranny work ................. $5,000 • 1980 Arnes 16 wheel lowbed ............ ............................................. $20,000 • Columbia 16 wheel lowbed 11 feet wide. Used daily off road. Not certified. New paint, great shape ....... ............................................. $30,000 • 1996 Alco 40 ton single drop, live roll and winch, certified .............. $21,000 • 4 new tires never used 37.5 -33 ........ ............................................. $16,000 • Holland heavy duty 5th wheel plate, never used ................................ $750

Contact Stew at 250-632-6776

stew@kitiron.com

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

farming

graders

HAY HAULING AVAILABLE! MH Truck Services, Prince George, BC. phone: (250) 961-8864

Cat 14M, 2008, ripper, 10,200 hrs, ex-county, $215,000; Volvo G990, 2007, ripper, 6,700 hrs, $120,000 . Calgary, AB. phone: (403) 291-1010

feller bunchers

2002 Tigercat 870B Tilter, 11,500 hours. Excellent . shape. Email for photos $175,000. Parksville, BC. geoff@brownsgroup.ca phone: (250) 720-5276

hammers

forestry

loaders (Wheel) Cat 966C, runs well, c/w 2 buckets, logging grapple, spare tire, chains, manual parts book. $22,500. Kitimat, BC. 2011 Link-Belt 240, 7,000 phone: (250) 896-1056 hrs, 8 cube grapple, comes 2 0 0 4 C a t I T 3 8 - G c / w Q/C bkt. Stand-by mach. with 2 brand new CWS Immac. $78,500. buckets (clean up and phone: (250) 365-3014 digging) excellent cond.

Bill 13 Contract for sale $210,000. Kamloops, BC. in the Powell River area. 3 20,000m plus 2 km of road phone: (250) 318-4859 construction per year. 5 year replaceable contract. 5 year cut starts 2016. Hammer It! Own or Rent. phone: (604) 485-4401 vanedequipment.com Phone: (604) 888-9020 generators Phone: (877) 255-9293 Buying & Selling Used Gensets, Diesel and loaders (Log) Natural Gas. www.raylewpower.com 2000 Hitachi 330LL, phone: (800) 295-5960 15,500 hours, good run400 kw generator, 12V71T ning loader. New pumps at engine, 300 hrs. $30,000 14,000. Email for photos. $85,000. Parksville, BC. OBO. Port Clements, BC. randy@obrienlogging.com geoff@brownsgroup.ca phone: (250) 720-5276 phone: (250) 557-4282

2 yd - 6 yd Used Hyundai Loaders c/w warranty. Different attachments avail. phone: (800) 661-4634

next AD DEADLINE:

Onan 277 kw 347-600 powered by 855 Cummins. 264 hours. $27,500. randy@obrienlogging.com phone: (250) 557-4282

1995 Hitachi EX300-3, burnt, parting out; 1999 Hitachi 330-5, burnt, parting out. phone: (604) 240-7977

FOR SALE 2007 Kenworth T800. Tandem axle, sleeper, Cummins ISX 530, 18 speed, air ride suspension, 46 rear axle, dual lockers. Excellent condition! ...... $67,500 Specialized Low Bed. 40' long x 8'6" wide. 19' working deck c/w beaver tails. Exc. cond. Works great in tight places. Heavy lift, 50 tons............ $12,500 Or special combo deal with Kenworth T800 ................................................. $75,000 1991 Freightliner, Cummins, 18 speed, 46,000 rear axle, lockers, c/w Peerless jeep & pole trailer, 8'6" bunks, S.I. scales. Recent M.V.I. ................... $27,500 1984 518 Cat Line Skidder. Very good condition ........................................ $18,500 1979 Cat 950 Loader. Excellent mechanical condition!! ............... $35,000

Call Steve at 250-354-8929 or steve@htheli.com Location: Nelson, BC

Sept. 18, 2015 To book your spot, Call Michelle Today! 1-800-663-4802

Page 57

BanninG EquipmEnt ltD 8901 Penn Road, Prince George, BC Phone: 250-564-7226 Fax: 250-564-7233 Email: scott@banningequipment.com

EquipmEnt For SalE

2008 - 304CCR - 2 Buckets, Thumb .................................. $58,000 2003 - 325C - 2 Buckets, Thumb ....................................... $75,000 2006 - 330D - 2 Buckets, Thumb ..................................... $110,000 2007 - 330D - 2 Buckets, Thumb ..................................... $155,000 2005 - 966G - Wheel Loader, 3 Valve, SS ..................... $105,000

DoZEr attaCHmEntS

Blade - D6D - Brush Rake WBM ...................................... $3,500 Blade - D8K - Brush Rake WBM ....................................... $6,500 Blade - D7R - SU C/W Arms ............................................ $15,000 Blade - D8R - DAT Blade & C-Frame .............................. $20,000 C-Frame - D8R - Cat C-Frame ............................................ $7,000 Ripper - D6N - Cat M/S ..................................................... $12,000 Ripper - D6R - Cat M/S ..................................................... $13,500 Ripper - D7G - Cat M/S ....................................................... $6,500 Ripper - D7R - Cat M/S ..................................................... $13,500 Winch - D5H - Cat P/S Winch Rebuilt ............................ $17,000

WHEEl loaDEr attaCHmEntS

Blade - 624J - WBM Hyd Angle ...................................... $12,000 Bucket - 966F - GP BOE *New* ........................................ $7,000 Bucket - 966G - GP BOE *New* ........................................ $7,000 Bucket - 980C/F GP BOE *New* ....................................... $8,000 Bucket - 980H - WBM BOE 12.5 Yard ............................. $12,500 Bucket - 310 - 4 in 1 92” *New* ........................................ $4,750 Bucket - 921E - GP BOE 5.75 Yard ..................................... $5,500 Coupler - 950G/H - WBM Hydraulic *New* .................... $7,500 Forks - IT28G - Cat Q/A ....................................................... $3,900 Forks - IT38G - Cat Q/A ....................................................... $4,500 Forks - 544K - JRB Q/A ....................................................... $3,500 Forks - 966G - WBM Q/A 48" .............................................. $6,500 Grapple - 930G Log Lumber Q/A ....................................... $4,500 Grapple - 938G, IT28G - Pipe ........................................... $12,500 Grapple - 938G, IT38G - Pipe ........................................... $12,500

motor GraDEr attaCHmEntS

john deere attachments

• ASSORTED DOZER ATTACHMENTS to fit John Deere, (hyd. tilt, 6-way, straight) Assorted Models: 850, 750, 650, 450, 350 • JOHN DEERE BUCKETS Assorted Models: 855, 755, 655, 744, 644, 544, 444, 344, 710, 610, 510, 410, 310 • JOHN DEERE WINCHES 850, 750, 650, 450, Like new 750J 60,000 lb. - Starting $500 & up! • RIPPERS to fit John Deere - new or Used • CABS to fit John Deere • 40,000 STOCKED PARTS for John Deere & hYUnDAI - new, Used and rebuilt!

MISCEllANEOUS • CAT New Rippers Available • Hyundai Hl740 TM-7 Dismantling running Unit, 3,000 hrs • Assorted Good Tires & Chains • Assorted Front End loader Frames & linkage Complete with Buckets. • log loader Grapples • Volvo l-90, Complete, Bucket, Linkage with Quick Coupler Bucket, Very Good Condition $2,500 - $4,500. • Cummins, Model: KTA19-G1, S/n: 02687, Complete engine for Parts, elec. Fan Drive. • Z.F. & Funk Rebuilt Transmission, Available. Call for Installed Prices.

Twin Deer Inc. www.twindeer.com

800-661-4634

Blade - 772D - WBM 104".................................................... $8,500 Blade - 872G - Brandt 133" ................................................. $9,500 Compactor - 140H - Follow Me Wobbly ......................... $14,000 Ripper - 14H - Cat M/S ...................................................... $12,500 Ripper - 14H - Ripco M/S .................................................. $10,500 Snow Wing - 140H - Lo-Pro WBM..................................... $8,000 Snow Wing - 14H - WBM Ripper Mount ......................... $9,000 Snow Wing - 140M - WBM .............................................. $12,000 Snow Wing - 14M - WBM ................................................ $14,000

ExCavator attaCHmEntS

Brush Rake - 120 - 54” WBM Q/A ..................................... $3,500 Brush Rake - 200 - 60” WBM Q/A ..................................... $5,000 Brush Rake - 200 - 60” CWS Q/A ...................................... $5,000 Brush Rake - 250 - 72” WBM Q/A ..................................... $6,500 Bucket - 200 - 30” WBM Q/A ............................................. $3,500 Bucket - 160 - 60” WBM Q/A *New* ............................... $4,000 Bucket - 200 - 60” Finning Q/A .......................................... $4,500 Bucket - 200 - 60” WBM Q/A ............................................. $4,500 Bucket - 290 - 42” WBM Q/A ............................................. $4,500 Bucket - 290 - 66” Finning QA ........................................... $4,950 Bucket - 290 - 66” WBM Q/A ............................................. $4,950 Bucket - 330 - 36” WBM Q/A ............................................. $5,500 Bucket - 330 - 48" WBM Q/A .............................................. $6,500 Bucket - 330 - 72” Finning QA ........................................... $6,500 Bucket - 330 - 72” WBM Q/A ............................................. $6,500 Bucket - 450 - 42” Finning Q/A .......................................... $5,500 Bucket - 450 - 48” CWS Q/A .............................................. $9,500 Bucket - 450 - 84” WBM Q/A ............................................. $8,500 Bucket - 450 - 84” WBM Q/A ............................................. $9,500 Bucket - 385B - 74” Imac Q/A ......................................... $12,000 Canopy - 329E - FOPS Canopy *New* .............................. $7,500 Grapple - 450 - WBM Heel Boom .................................... $10,000 Ripper - 200 - WBM Q/A ..................................................... $3,500 Ripper - 250 - WBM Q/A ..................................................... $4,000 Ripper - 330 - WBM Q/A ..................................................... $4,500 Thumb - 200 - WBM Hyd C/W Coupler ............................ $4,500

rEntalS

1984 - 980C - Wheel Loader ........................... Per Month: $8,000 2003 - 325C - 2 Buckets, Thumb .................. Per Month: $10,000 2004 - SD160DX - 84” Compactor ................. Per Month: $7,000 2005 - CS563E - 84” Compactor..................... Per Month: $7,000 2011 - 246C - Skid Steer.................................. Per Month: $3,000

Page 58

Supply Post Western Canada Edition · supplypost.com

lumber

mills

mining Equip.

September 2015

mulchers

3” & 4” Lowbed decking up to 24’ long. 2x8 truck decking 12’ to 24’ long. Treated (2) Caterpillar 980 wheel t i m b e r s & p l y w o o d s . loaders, both in good run- Swamp pad timbers, 8x8 - Lease to own Bandsaw ning condition and ready 10x10 - 12x12 - to 30’ long. Mills from only $135/mth 0 to go to work. $35,000. ea. Bridge timbers cut to size. down. We are the manuKamloops, BC. phone: (250) 371-7500

Poles for pile driving, any size. Metal roofing and wall

Sign up for the Supply Post cladding. Heavy duty 18 gauge Q-deck, galvanized mailing list – call today: toll free: 1-800-663-4802

logging

roof decking. $4.95 per lineal foot. We deliver “even to the moon”. can-am lumber mill phone: (604) 580-1415 Would you like to receive our

Need log marking hammers? Overnight delivery, most cases. Achinback Foundry,

paper

monthly?

Subscribe today. supplypost.com/subscribe

marine

#103-1017

Dunford Ave, Victoria, BC. phone: (250) 474-0037 or: (877) 474-0037

Crew Boats: Transport Advertise your machines C a n a d a certified. in the classifieds! Call Aluminum, diesel powered, Michelle for deadline and fully equipped. rates. altech leasing ltd. Call: 1-800-663-4802

Phone: (250) 286-0055

FOR SALE 6 - RV TRAILER AXLES, 7,000 lb. 8 stud, with electric brakes, never lube hubs and springs............ $400/each 2008 - I.R.L8C Light Tower, with Kubota Power . $2,950 Tridem Flatdeck, 53 Foot. Good cond. Cert......... $7,500 (3) PEERLESS TRI AXLE LOG TRAILERS, current MVI. Long log trailers. Work ready.................... $10,000 each 2 - 966C LOADERS, as parts machines ..... $19,500 OBO 1993 MADILL 3800 LL. Good working cond. ...... $35,000 5675 AMERICAN LOG LOADER, c/w spare parts and spare grapple. Working condition...................... $37,500 SERVICE / RESCUE TRUCK. Converted Fire Truck. 1985 Federal E1, 6V92, A/T, Alum Wheels, Gen Set, Air Comp.Tool Boxes Etc. Phone for Pics................ $37,500 2001 HYUNDAI 360LC, EXC. 5000 hours. With Thumb, Work Ready............................................................ $47,500 1977 MADILL O-71, 4 Guy Lines. Good cond. .... $80,000 TRACK DRILL, ECM 660, 7,500 hours. Drifter is rebuilt 0 hours. Excellent condition .............................. $150,000 MADILL 099 YARDER. Good condition ............ $175,000 2012 CAT 568 ROADBUILDER with 6,000 hours, Q/C & 2 buckets, new undercarriage .......................... $299,000 2011 W/STAR WRECKER c/w CENTURY 1075S ............. ............................................................................................... SOLD MAKI 2 CARRIAGE and TALKIE TOOTERS ........... P.O.R. 2 - D8K CATS, as parts machines. C/w winches .. CALL

~HOPE MECHANICAL SERVICES~ Phone, Text or Email easyhope@yahoo.com

Glen at 604-795-6827, Ray at 604-860-3000

2013 Tigercat 470, CarbonBite CBM 8000 mulcher head, fire supfacturers…call us directly & Placer trommel and con- pression system, Webasto skip the middle person! centrator wash plant, 30-40 pre-heat, hydraulic winch, phone: (877) 537-5099 ton per hour, $39,000. 603 hrs. $420,000. Red Advertise your machines High production vibrating Deer, AB. in the classifieds! Call screen and concentra- phone: (403) 358-7762 tor, $69,000. 6 Deck clasMichelle for deadline and sifier screen, $28,000. Slashbuster 480HD with rates. Belly dump trailer, $8,900. long arm, swivel, grapCall: 1-800-663-4802 For sale: BC gold mining ple, extra blade. $20,000. claims. Additional equip- Creston, BC. Sign up for the Supply Post ment available. www.cullbros.ca/surplus mailing list – call today: goldbraywolf@gmail.com phone: (250) 428-9868 toll free: 1-800-663-4802 phone: (604) 856-7106 Superior variable speed Grizzly belt feeder. Hopper Gold mining claims. Near is 20 ton capacity. 200 hrs use. $40,000. Located in Lillooet, BC. Adjoining a YK. producing mine making auremalliance@hotmail. $15,000 per day. Asking com phone: (509) 951-3156 2006 Hitachi Forester $19,000. Rubber-lined 150 hp 10x10 550 hp mulcher, c/w new phone: (604) 250-5325 Slurry Pump with controls CarbonBite CBM 4000 Can’t find what you are and electronic eye and mulcher head, valued at looking for? Thousands of tank. Approx. 200 hrs use. $88,000 and existing 450 $40,000. more machines and equipauremalliance@hotmail. hp power pack. 7,567 hrs. ment for sale on: $325,000. Red Deer, AB. com phone: (403) 358-7762 phone: (509) 951-3156 www.supplypost.com

mining

Alberta

ENGINE & PARTS LTD.

Ph: 403-720-3494 Mark Cell: 403-519-7254 mark@albertaengine.com

1-800-361-7333 cat • C15 MXS .................................................$3,900 • 3116 New Surplus ...................................$8,900 • 3116 Used ...............................................$5,900 • 3126 210 hp ............................... $4,200-$4,900 • 3208N ......................................................$2,800 cUmminS • QSB6.7 Power Unit New Surplus ..........$14,900 • ISC 8.3 ....................................................$4,900 • 6CTA8.3 Rebuilt CPL1262 .....................$12,900 • 4BT3.9 RB Long Block CPL2109, 594.....$4,900 • 4BTA3.9 RB .............................................$6,995 • 6BTA5.9 Ind Complete Rebuilt ..............$12,900 • 6CTA8.3 RB Long Block ..........................$9,700 • ISB 5.9 04-07 Dodge ...............................$5,900 detroit • 4-71, 1,200 hrs on RB.............................$4,500 • 8V92TA Low Hour Rebuilt .......................$7,900 • 6V92TA................Prices from $1,500 to $7,500 • 6V53 ........................................................$1,200 • 6V71TA Industrial ....................................$2,900 • 50 Series Nat Gas ....................................$2,500 check oUt oUr webSite for more detailS 1-800-361-7333 · Mark Cell: 403-519-7254 64166-426 Ave E Aldersyde, AB T0l 0A0

www.albertaengine.com

PARTS 2012 622B Waratah proc. head, c/w Timberite computer, 8,000 hrs. $45,000. Kamloops, BC. terratim1@gmail.com mike: (250) 320-1871 Stick for a 2012 Cat 320D. Perfect shape. Also fits 320Cs. $9,000. Kamloops, BC. terratim1@gmail.com mike: (250) 320-1871 1995 Hitachi EX300-3 LL, burnt, parting out; 1999 Hitachi 330-5 LL, burnt, parting out; 2005 ZX-200 Hitachi excavator, parting out. phone: (604) 240-7977 MITSUBISHI New and Used engines and dozer parts, manuals, large inventory. rhineequipment.com phone: (253) 536-0600 Sign up for the Supply Post mailing list – call today: toll free: 1-800-663-4802 Do you like us on Facebook? Go to this link and like our page today! supplypost.com/facebook Supply Post: Family owned and operated since 1971.

AXIS FORESTRY INC. • Aftermarket Parts Source To Fit Your Waratah Processor • Rebuilt Waratah Processors Available • Trade In Or Rebuild Your Waratah • Repairing Waratah Computers • Repairing IQAN Skidder/ Buncher Joysticks • Can Ship Anywhere

www.axisforestry.com 1-888-678-2947

FOR SALE

GRANITE ROCK QUARRY AND SAND & GRAVEL • 100 plus acres! • Approximately 15 million cubic yards of granite rock. • Gravel 12 million cubic yards. • All equipment included in price. • Asking $1,500,000. Highway #4, Parksville - Qualicum area on Vancouver Island, BC. Call for more information:

Phone: (250) 758-7652 Cell: (250) 756-8532

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

2006 320C Cat Processor with a 622-B Waratah processing head. This machine needs nothing and is ready to go! Well maintained. All SOS samples are done. Recent new Cat motor and pumps. 1 9 9 9 B a r b e r G r e e n e , 18,000 hours. $115,000. model 265B paver with Kamloops, BC. terratim1@gmail.com 10/20B extend-a-mat, low phone: (250) 320-1871 hours, very good condition. For details, price and full pumps set pictures, contact: Rubber-lined 150 hp 10x10 gatewaymach@telus.net Slurry Pump with controls bill: (604) 831-6969 and electronic eye and

paver

tank. Approx. 200 hrs use. $40,000. auremalliance@hotmail. com phone: (509) 951-3156

pipes

Resale pipe, like new, no wear. Used for sweet gas only. 1,500 ft. of 30 in. 3/8 wall, $25/ft. 1,500 ft. of 36 in. 1/2 wall $38/ft. Williams Lake, BC. phone: (250) 457-7401

rollers

INvENTOrY:

740A JD Grapple Line Skidder...................................................... $14,000 520 TJ Line Skidder ...................................................................... $14,000 125 International Track Loader, 4-in-1 bucket .............................. $11,000 350 TJ Line Skidder ...................................................................... $11,000 630 Prentice Buncher Hoe Chucker.............................................. $17,000 668C Line Skidder ......................................................................... $20,000 668F Clark Grapple Line Skidder .................................................. $23,000

ParTs machines JUST CAME IN: S10 International Skidder • D6D Cat Crawler • JD200LC Excavator • 748GII Skidder • 2005 330 Linkbelt Excavator • 630B Tigercat • 325 Cat Excavator • 2005 Cat 545 Skidder • 2007 753 JD Buncher (Burnt) • 330 Cat Log Loader with Thunderbird Log Loader • 545 cat skidder, 748GIII, 748GII, 848 JD Skidders • 686 & 740 Champion Grader • 618 Buncher, 525 Cat Skidder • 1995 Freightliner, Series 60 Detroit, 470 Hp, 40,000 Lb 410 Ratio Rockwell Axles, Double Lockers • 125 Clarke Wheel Loader • 210 300 Komatsu • 210, 200 Hyundai W/ Harricana Stroker • Crane Ph 20-1A Omega • 644A Jd Loader • 380, 404, 450, 480, 550, 660 TJ Skidders • 330, 320, 325, 322, 225, 235 Cat • Denharco 3000-3500 Strokers • Cat D6C • 2200 Limit Stroker • 630 Prentice Buncher • Hitachi EX200LC • UH14 • 630 Tigercat Grapple Skidder • 518 Cat Skidder • S8, S9 International Skidder • Terex 8231 Loader • Coring Hotsaw 20-22 Head • Link-Belt 4300-2800 • 2800 Quantum • 2628, 608, 618, 628 TJ Bunchers • 848G • 748GIII • 648GII • 748E, 748G, 740A, 649E, 648D, 640D, 540A, 540B, 440 • Graders Austin Western Champion D600-760 • Hitachi 270 • Tires/Chains: 30.5 x 32, 24.5 x 32, 23.1 x 26, 18.4 x 34, 26 x 28 • 18.00 x 25, 14.00 x 24, 16.00 x 24, 20.5 x 25 • Tracks for 618, 628, D6, D7, 200

running moTors 8.3 5.9 Cummins; 671, 353, 453, 471, 6V53 Detroit Diesel; 466, 414, 4276, 4045 John Deere

Visit www.SkidderbuncherParts.com For More Info & Photos! * VISA & MASTERCARD ACCEPTED *

EXCAVATORS, CATS, whEEl lOADERS

2007 hitachi zx200-lc, well maintained, 70% under carriage, 2 buckets and new hyd. thumb, Extra plumbing, 12,000 original hours, very clean.... .................................................................................................... $69,500

• 2006 ZX350LC, guarded, 6,600 hrs .......................POR • 2007 Kenworth T800 Tri Drive 60 Ton Sleeper Boom Truck, removable deck........................................ $250,000 • Hitachi 370-1 Log Loader, new U/C, T-Mar, hydraulic 2 cylinder ...................................................$79,900 • Rotobec 4552 Grapple with heel, 100 hrs per, will fit 300 size machine ..............................................SOLD • 1996 Hitachi 300-3 with heel & Grapple ............$35,000

• Moxy MT30 Articulated Truck ......................$37,000

machines for sale

Kamloops, bC

www.e-quiptrading.com equipsells@shaw.ca

• Hitachi 400-1 LC Log Loader, new U/C, well maint. ....SOLD

• Moxy 6225B Articulated Truck .....................$25,000

Evenings (250) 835-4678

Call ed at (250) 318-8870

2006 john deere 270c-lc, very clean and straight, 80% undercarriage, 32” pads, catwalks, new hydraulic thumb, 2 buckets and quick change, 7000 original hours, automatic gas shutoff ................................. $89,500

• Champion 760 Grader ..................................$19,500

2007 JCB Vibromax, model VM132PD, 84” padfoot, 2,770 hrs. $65,000. Smithers, BC. jim: (250) 287-1214

equipment available

• 2003 744 John Deere Wheel Loader, new trans., new tires, ready to go to work in the dryland sort. ............................ $109,900

• 1986 Kenworth C570 Hiab with Hiab 140 ...........$17,000

WallyQuality ’s Private Parts Used Parts Phone: (250) 833-8349

1980 Knight tAnDEM tiPPY tRAiLER $15,500.

• 2006 Hitachi 450 LC Roadbuilder w/2 bkts, thumb, 2 available .......................................... $119,000

processors 2003 Cat 325C, Waratah 624, new engine, many fresh new and rebuilt components. $140,000. Parksville, BC. geoff@brownsgroup.ca phone: (250) 720-5276

MONTHLY SPECIAL

Page 59

*fINANCINg AvAILAbLE*

www.rOYquIP.COM

250-203-0134 fOr MOrE INfO

BROWN INTERNATIONAL SERVICES NEW PArts for iHC - Dresser - in stock, including Exchange transmissions, steering Drives & Drop-in Motors, Carco Gearmatic Winch Products FUll trACK PrEss FACilitiEs Complete Excavator & Crawler tractor Undercarriages Berco, trek & intertractor

MACHiNEs For sAlE

• Dresser TD25G, angle blade & cab ..................................... $46,800 • TD20E, c/w ripper, good condition..................................... $55,000 • TD15B, Powershift winch, bush guarded ............................. $21,500 • Dresser TD8G, 90% undercarriage, Carco 30 winch ........... $35,000 · IHC H80B, runs well, c/w bucket .............................................P.O.R. • TD20E Beales brush blade ....................................................$4,800 • TD15C Beales brush blade ....................................................$4,000 • TD15C Winch, Carco F50 .......................................................$3,500 • TD20G-20E Grapple .............................................Reduced $12,000 • DT360 Power Plant with Rock Ford PTO .................................$3,800 • Used Carco 30B Winch for Dresser TD8G and TD9H ..............$7,500 • Rebuilt 4BT Cummins for TD8G or TD9H .................... $4,800 + Core • 817B Engine ..........................................................................$8,900 • JD CWS Grapple 644H, Exc. cond..........................................$3,200 • Used TD25 Rails & 22" pads .................................................$6,000 • TD7C/8E & G Track Assemblies ........................................... In Stock • Assorted ripper shanks ............................................................P.O.R. • Dresser TD20E/G ATECO Ripper ...............................................solD • Cat D46U Engine Core ...........................................................$1,000 Wrecking: Komatsu D85E-18, good undercarriage Large Inventory Of New & Used International & Dresser Parts & All Brands of Undercarriage

“We Service What We Sell” Ph: (250) 546-6518 • Fax: (250) 546-3100 www.brownihc.com |E-Mail: info@brownihc.com 4274, Box 557 Hwy 97A North, Armstrong, B.C. V0E 1B0

2006 cat 242B Skid Steer, 3600 hrs, cab, air, GP bucket, line bored and rebushed, new seat cover, good machine, delivery today! ............$21,500 lOGGING EquIpmENT 1995 jdeere Grapple/Winch Skidder, hard to find combination, cab, air, chains, good rubber, rebuilt hydraulic pump with warranty. Re-sealed, good price, good skidder! . .......................................................... $29,500 1995 cat 525 Grapple/Winch Skidder cab, decent tires, chains, good running skidder, ready to go ....................................................... $29,500 1997 jdeere 690Elc log loader, short wood grapple, high rise cab. ...... .................................................................................................... $29,500 2004 Volvo Ec240-B log loader, high rise cab, rear entry, runs and works good. . ............................................................................... $29,500 TRuCkS AND TRAIlERS 2013 Western Star Tridrive SRS60, 560HP, 18 spd, 20,000lb front axle, dual strg. boxes, new BC MVI, airliner suspension, 22.5 rubber on alum. wheels, 260" W.B. 798,000 KM, nice truck................................... $79,500 2008 peterbilt Tri drive c&c 265” wheelbase, Isx560 hp, Cummins, 18 speed. 69,000lb rears on Peterbilt air trac suspension, 20,000 lb front axle, dual steering boxes, 385R22.5 steering tires, all aluminum wheels, 11R24.5 rears all good, new BC MVI, delivery today, clean, sandblast and painted frame, only 500,000 km .................................................. $84,500 2009 Ford F750 Fuel lube Truck, single axle, no air brakes! No air ticket required, close to new! low km’s, Cummins IsB 6.7 litre, exhaust brake, PRO HEAT!, Automatic transmission, 194” wheelbase, 90% steering tires, compressor, 1000 gallon fuel tank, oil recovery tank, 5 reels and hoses .... ............................................................................ call Ed Today! $29,500 2003 International Service Truck Extended cab, DT466-E diesel, 6 spd. trans., Brutus service body, “Tiger” 6EH crane w/remote, 3 extensions, only 150,000 km’s! ..................................................................... $29,500 2013 BWS double drop Machinery Trailer 40 ton, capacity, air detach neck, 24 ft well, flip over for jeep or tri drive, like new original condition. . ....................................................................................call Now! $69,500 2000 Frieghtliner With hi-Rise Sleeper, C-15 515hp single turbo Cat s/N 6NZ20824, 18 spd, air ride, decent truck, double lockers, all alum. wheels, good rubber on back end, alum. cab guard. ....... Asking $18,500 1980 Western Star dump 3406 cat, w/retarder, new brakes, all good tires, 16,000 lb front axle, rubber block suspension, 16’ lite steel box w/ new hoist. ............................................................................ $REdUcdEd 1990 Blue line Tank Trailer, tandem, 1500 gallon self dump tank, hoses etc. .....................................................................................Asking $5,900 1979 peerless S/Axle low Bed Booster, fish mouth, 24.5 tires on 6 spoke, ready to go. ....................................................................... $6,495 1999 peerless Tridem pole Trailer, air ride, extended reach, good rubber, all aluminum wheels, certified cab guard, truck bunk and bolster, ride pipes, scales. ...................................................call Ed Now $18,500 1994 peerless S/Axle log jeep with 1993 columbia Tri Axle log Trailer, new BC MVI, low pro bunk, trip one side, 17” cup and saucer, 24.5 rubber on steel Budds. ......................................call Ed Now $9,900 COmplETE DISpERSAl RETIREmENT - kAmlOOpS CONTRACTOR. pARTIAl lIST INclUdES: cat IT24, cat IT28 Wheel loaders, Bucket Machines, Snow Buckets (Avail),hitachi Ex270lc 10,000 Original hours, Guarded, Rock hammer Available, Thomas 175 Skidsteer, low hours, lots of Attachments, Thomas xl45 Screener With xtra Screens, Bomac 66” packer low hours! Bomag Walk Behind packer, GMc Single Axle dump (New Engine), 12 Ton Tandem Tilt Trailer, Nahanni Gravel pup ... ....................... call Or Email For complete list , Years prices Etc. mISCEllANEOuS 10 New containers in stock! sales & Rentals. ......call Ed for pricing Rental property! 2 acres, highway frontage! Great storage yard, equipment, truck or trailer parking. ............................... spots available. 1993 Ford F250 2 Wheel drive long Box, 2 owners, local truck from new! No rust M460, auto, new headers, K&N filter, bucket seats, canopy, 2nd owner, well maintained, great condition, perfect safety inspection, needs nothing! 186,000km., trailer package, hitch etc.................. $4,500 23.5 Spare, chain, on rim ............................................................... $950 1 set of 30.5 heavy duty Skidder chains, lots of life left. . Asking $1,800 Buyers Waiting ...

Call ed now (250) 318-8870 Mining • Trucking • Logging equipsells@shaw.ca

Page 60

Supply Post Western Canada Edition · supplypost.com

Would you like to receive our paper monthly? Subscribe today. supplypost.com/subscribe

sawmills Handy Hitch gravel ballast packer/rollers, easy access, 6,000 lb doubleended spindles, 14 ply tires. $19,337. Red Deer, AB. phone: (403) 396-1208

PORTABLE SAWMILLS INDUSTRIAL SAWMILLS BLADES & BLADE MAINTENANCE. PHONE: (877) 866-0667

Extec E7 Screener, 16x5. Good condition. 2,800 hours. $100,000 Cdn. Langley, BC. phone: (604) 866-0482

skid steers

90” Contour Packer/ sand & gravel Roller. 12 wheel, 90” width. $21,970. Red Deer, AB. Superior variable speed Grizzly belt feeder. Hopper is phone: (403) 396-1208 20 ton capacity. 200 hrs use. D o y o u l i k e u s o n $40,000. Located in Yukon. Facebook? Go to this link auremalliance@hotmail. Mills - Blades - Sharpeners. and like our page today! com Mills starting at $135/mth. supplypost.com/facebook phone: (509) 951-3156 www.portablebandsaw mills.ca phone: (877) 537-5099

Oversized equipment services Equipment • Attachments • Used Parts

2463 Townline Road, Abbotsford, BC, Canada • (604) 855-9977

EqUiPmEnT fOR SAlE EXCAVATOR: Cat 345BLC (2001) cab, q/c, thumb.....................................$POR Cat 320L (1996) cab, q/c, buckets. ................................. $43,000 Cat 235DLC Cab, Labounty 3000 shear ...............................$POR Cat 330DLC (2007) cab, q/c, thumb, bucket. .................$195,000 Cat 330BLC (1999) cab, q/c, thumb, bucket. ...................$70,000

ROCK TRUCK: Cat 769D (1999) flat floor box, 80% tires, clean, records on file. .............................................................................................$POR

2011 Cat 246C, 2 spd digging, snow buckets, forks. This machine is like new. 630 hrs. $46,500. Fort Nelson, BC. Would you like to receive phone: (250) 500-3274 our paper monthly? skidders Subscribe today. supplypost.com/subscribe

scales 10 x 60 Western scale. Reduced to $10,500 OBO. Kamloops. phone: (250) 371-1000

1987 Caterpillar 518. Runs great. 850 gallons of water with pump. Also comes New Juniper 4’ x 10’ Single with grapple winch and Deck Scalping Screen, spare 1986 with winch. POR. Kelowna, BC. Spare machine runs too. Juniper Equipment Ltd. $19,000. Salmo, BC. phone: (250) 357-2545 phone: (250) 470-8987

screeners

September 2015

trailers (Dry Van) 2011 Stoughton 53’ Tri-Axle heater van. 1,400 hrs on heater. Good rubber and brakes. One owner. Excellent 2010 John Deere 748H, shape. Creston, BC. 6,285.3 hrs, new tranny & dave: (250) 428-7189 motor by Brandt Tractor at 5,000 hrs. In excellent operating order. Great skidder. $155,000. phone: (250) 832-3322 2002 Tigercat 630B, 12,000 hours, good shape. Good rubber. Good runner. $50,000. Email for photos.

trailers (Office) Skidded Office Trailers for sale. 12' x 60'. Various floor plans available. Edmonton, AB. oc trailer rentals octrailerrentals.ca brent: (587) 991-5015

trommels

geoff@brownsgroup.ca phone: (250) 720-5276

tires 2 New Primex Tires, these are loader tires. L3 tubeless nylon. 28 ply rating for M c C l o s k e y T r o m m e l screening plant, MCB 7 x 22.00 rims. Size 26.5 x 25. 24 RE. Very good condi$4,000 each. Fernie, BC. tion. Includes inventory of phone: (250) 423-5996 10 screens. phone: (403) 606-6395

trailers

2008 Midland Gravel Clam Dump B Trains (2). $60,000. Edmonton, AB. js@jesellorsservices.com phone: (250) 774-2345

trucks (C&C) 2003 Kenworth T800 Tri Drive. Rebuildable unit. $50,000 OBO. Prince George, BC. phone: (250) 562-8086

WhEEl lOAdER: Cat 980GII high lift (overtop grapple) ..................................$POR

copac@cpecanada.com | www.cpecanada.com

ATTAChmEnTS • 290 Button Top Grapple • Excavator Buckets Of All Sizes • Buckets - Clean Up / Digging • L120 GP Bucket

• 325 Button Top (IMAC) • Labounty 3000 Shear • Short Wood Grapple (12’) • Demolition 5 Finger Grapple

USED TRACK GROUPS Model PC220 JD160 JD600

Section 52 42 52

Pitch 7.5 7.5 9.0

Pad Width (Bar) Remaining 28” (2) 85% 28” (3) 70% 36” (3) 50%

hYDRAUliC CYlinDERS Stick boom and bucket cylinders all models, rebuilt or as is, no core required on most models.

fORESTRY ATTAChmEnTS Button Tops, Heal Racks, Denarko Heads, Pierce Heads, & Risley Heads

COmPOnEnTS in STOCK • Final Drives • Swing Boxes • Engines • Differentials • Hydraulic Cylinders • Hydraulic Pumps

• Wheel Planetary • Hose Kits For All Machines

WE hAvE A GOOD SElECTiOn Of EqUiPmEnT ThAT hAS bEEn DiSmAnTlED fOR USED PARTS Currently Wrecking on: 980G, 330BLC, 320BLC, D8K, 120G, 325B For Your Equipment Needs:

Bob Garden: 604-916-4546 Brian Rowsome: 604-219-3194

COASTAL PACIFIC EQUIPMENT

For Your Parts (new/used) Needs:

604-855-9977 1-866-456-9977

We purchase machines – let us know what you have!

www.oversizedequipment.com

1-800-811-6911 • (250) 392-7755 685 South Mackenzie Avenue, Williams Lake, B.C. V2G 1E2

1977 Dresser TD7E 70 hp, with 6 way & ripper . $24,000 1978 Dresser TD15C angle blade and root rake . $19,500 1977 Dresser TD20E A/blade or semi-U ...........$35,000 1988 Dresser TD20G LT winch or ripper ..........$65,000 1987 Dresser TD20G encl. cab, ripper, angle blade. ..... ...........................................................................$65,000 2010 Dressta TD20M w/angle blade & ripper, 1,433 hrs. .........................................................................$380,000 1977 Dresser TD25C angle blade, ripper or winch .. $21,000 NEW 2012 Dressta TD20M LT encl. cab,air, angle blade, ripper. ....................................................................CALL 1983 Dresser TD25E w/angle blade, ripper, encl. cab. .CALL 1979 Dresser 530 Wheel Loader w/bucket & grapple ...........................................................................$24,500 1992 Hitachi EX120-2 thumb, dig bucket, 11,000 hrs. . ..........................................................................$34,500 1997 & 1999 TJ950 Buncher (1997 parts unit) make an offer for both. .................................................. OFFERS! Allu Grinding Bucket with Q/C, 60 hrs..............$19,500 1978 JD 540B Line Skidder .............................$12,000 2012 John Deere 648H grapple skidder, 4190 hrs ........ .........................................................................$175,000

Miscellaneous For Sale CuRRENT MACHiNES DiSMANTLED

IH • DRESSER • DRESSTA • TD9 • TD15B • TD15C TD15C-20-E-G Clearing Rakes • TD15E • TD20B • TD20C TD20E • TD20G • TD25C • TD25E • 175A • 250C HOUGH 515 • 530 • H65 • H80B • H90E • H100 CLARK 666 & 667 • JD540A & B • JD640 • 648D • 648E KOMATSU D65-6 • 60" CLEAN-UP BUCKET 950F CAT BUCKET • TD20E-G FULL U-BLADE TD25E-G FULL U-BLADE • (2) 20.5 X 25 TIRES L5

New & used IH dresser parts

XTREMEGRIP GREAT PRODUCT TO PREVENT SLIPS & FALLS! XtremeGrip is the most aggressive peel and stick traction product available, featuring rust resistant steel studs embedded in durable poly urea with an adhesive backing. This studded design provides superior traction in mud, ice and snow, where other conventional traction would become useless. Great for step points to improve safety on all heavy equipment. Sold by: 2" x 24" Strips, and 5" x 24", or 12" x 24" Sheets. Availalbe in Safety Yellow and Black.

SAFE – TOUGH – DURABLE • Suitable for all climates & conditions • Ideal for the oil & gas industry • Ideal for the coastal marine industry • Industrial strength • Resistant to water, snow, oil, harsh chemicals & more • Can be pressure washed & steam cleaned • Can be cut to any size that you wish

VISIT OUR wEbSITE OR CALL TODAy FOR mORE INFORmATION! Visit us at: gripallusa.com

JANTZEN ENVIRONmENTAL

604-793-6352

jantzenenvironmental@gmail.com

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Sign up for the Supply Post trucks (Water) mailing list – call today: toll free: 1-800-663-4802 1992 Peterbilt 357, c/w Tremcar double walled Do you like us on stainless steel tank. Facebook? Go to this link 725,000 km. $40,000. and like our page today! Edmonton, AB area. supplypost.com/facebook phone: (780) 964-4547

trucks (Hwy) 2003 Freightliner Argosy Cab-Over, c/w C-15 Cat engine. New head, new radiator, all heater & coolant hoses replaced. 18 spd transmission. Rubber 75% and brakes 70%. Creston, BC. dave: (250) 428-7189 2005 International 9900i Highway Tractor, only one non-smoking owner/operator. Many recent upgrades. New rubber, ISX 500 Cummins, recent rebuilt 244” wheelbase. 390 rear end super 40’s. 18 spd dbl over transmission. Creston, BC. dave: (250) 428-7189

wanted Wanted to buy: Used Crawler Skidder. phone: (208) 343-3621 PARTS WANTED: Final drive for UH07-5 Hitachi excavator. saugran@hotmail.com randy: (250) 394-4647

wrecking Wrecking: Cat, JD, Hitachi & Link-Belt equipment. penner’s heavy duty parts & servicE phone: 1-800-663-8210

Wrecking: Cat, JD, Kom, Link-Belt. Oversized Equipment Parts 2463 Townline Road, Abbotsford, BC Sign up for the Supply Post phone: (866) 456-9977 mailing list – call today: or: (604) 855-9977 toll free: 1-800-663-4802 Do you like us on Facebook? Go to this link and like our page today! supplypost.com/facebook

yarders

DEERE CONSTRUCTION FOR SALE Parts & Components

One of the largest inventories of used, rebuilt, and new surplus Deere parts and components in North America. We also stock parts for Hitachi, Timberjack, Caterpillar, Ditch Witch and can locate those hard to find parts that we may not have in stock.

BRANDT VALUE PARTS

1-877-685-4886 FOR SALE:

New SHELTER 60' wide x 64' long (designed for the Town of Sparwood snow loads)

Includes: • (2) 36" x 80" Steel man doors • (2) 36" Exhaust fans • (2) 48" Shutters • Clear polycarbonate for increased daylight, for upper back wall • Seismic strapping for 2 runs of blocks For More Info, Call:

250-489-9502

trucks (Logging)

PRINCE GEORGE

TRUCK & EQUIPMENT

250-561-1234 - www.pgtruck.com 2013 Peterbilt 367, 600 Cummins, 18 spd, 20,000 lbs front end, 46,000 lbs rears, 48” sleeper. 2 years warranty left. 370,000 km, c/w as new Superior B short log trailers. $199,000. Boston Bar, BC. tbforman@lookieloo.net phone: (604) 867-9786

1-800-946-9400

Grapple yarder for sale, c/w 3 grapples, butt rigging, blocks, straps, climbing gear, carriage, radios, etc. N-14 Cummins engine, 124 style boom, 60” riser. Runs well and ready to work. Powell River, BC. phone: (604) 485-4401

trucks (Scale) 80” low profile portable truck scale. New scale shack. Asking $55,000. St. Paul, AB. robgroup@telus.net phone: (780) 645-3659

trucks (Sleepers) Pierce PSY 200 Yarder, Detroit V12 in upper and Detroit V8 in carrier. New insulation and full glass in cab. All noticeable leaks in pump, motors, hoses, and 1999 Freightilner, 370 cylinders repaired. New Cummins, 10 speed, brand tires. New batteries. Metal new batteries, fresh MVI, straightened where need1,150,000 kms. $13,995. ed. New paint. S/N 10508. Campbell River, BC. $225,000 US. Eugene, OR. phone: (541) 747-5517 phone: (250) 287-8640

Page 61

EQUIPMENT • 2000 Hyundai 210 LC-3 H/W with IMAC power clam .......POR. • 793 John Deere Buncher .............................................$18,500. • D600 Champion Grader w/ Snow Wing ......................$15,500. • 3412 Cat GenSet 906KVA ..................................................POR. • 2200 Madill Buncher, rebuilt 8.3 ......................................POR. • 748E John Deere Grapple Skidder.....................................POR. • 219 Cat Buncher .........................................................$12,500. • TD20G & TD20E Dressers, w/winch and ripper ................POR. • 2000 Timberjack 4x4 20K lb Forklift ........................... $18,000. • 450A Timberjack Line Skidder ....................................$18,500. • Cat D5B Crawler, new U/C, winch ....................................POR. • 1988 Komatsu 220LC Stroker .....................................$18,500. • 667C Grapple/Line Skidder ...............................................POR. • Onan 18kW GenSet, 1 or 3 ph., w/trailer ...........................$7,500. • Volvo 125 KVA Genset, 120/208/460V..........................$9,500. • Model 5000-21 Superlift Str. Boom Crane ...........................$4,950. • Rotobec Grapple, off Hitachi 200 ......................................POR.

TRUCKS & TRAILERS • 2014 BWS Ez-2-Load Hiboy 53' Tridem .............................POR. • 2007 Wabash Step Deck Tridem .................................$28,500. • 2001 Peerless Super B Hayrack ........................................POR. • 1997 Tycrop 53 ft. Walking Floor ......................................POR. • 1994 Peterbilt 377, N14, 18, 46 ........................................POR. • 1991 GMC Topkick Serv Fuel Truck, crane .................$12,900. • 2005 48’ Great Dane Tandem, Dry Van w/tailgate ...........POR. • 2005 Westec Vac Tank ......................................................POR. • 1995 Autocar S60, 18, 46 ..................................................POR. • 1990 ParPac Tri-Axle .........................................................POR. • 1990 KW T800, Cummins, 5th wheel ..........................$16,500. • 1985 Mack R688 Tandem, E6350..................................$9,500. • 1981 Ford, 20’ box, p/tailgate, Allison tr .........................$4,950. • 1980 Lincoln S/Drop Lowbed, 8’ ...................................$9,500. • 1988 Totem Tri-Axle ......................................................$7,500. • 1989 Hino & 1995 Topkick 24’ Van, P/Tail ........................POR. • S/A & Tandem Axle Jeeps .................................................POR.

wRECKING • 748G Skidder • G67 Grapple • TD20E • Cat D5B • Cat 219 Buncher • Timberjack 450A & 520 Grapple Skidder • Hitachi EX200-5 • 230 & 404 Timberjack Line Skidder • Clark 668B Line Skidder • Clark 125B Loader • John Deere 693D • Treefarmer C7 & C8 Line Skidders • 82-40 Terex • TS24 • Warner & Swasey Grad-All 300 Hydro Cruiser • Komatsu 220LC • Good selection of Detroit Diesel, Allison, Clark, Twin Disc, Cat, Cummins and Perkins engine and trans. parts.

CRAWLER TRACTOR

1989 D5H Cat high track/ 6 way blade, grapple & winch ......................................................$40,000.

SKIDDERS

1997 Timberjack 560 grapple skidder..... $22,000. SOLD 1999 Timberjack 560 grapple skidder..... $24,000. Timberjack 480 grapple SOLD skidder ............. $19,000.

PROCESSORS

1993 Hitachi 220 danglehead c/w warratah head ... ................................................................$23,000. Cat EL200 Stroker delimber. .................. $15,000.

BUNCHERS

1999 Prentice 630 feller buncher, c/w 24" gilbert head, loading grapple & boom for back spar. Excellent for hoe chucking...................... $40,000.

LOADERS

1993 Link-Belt LS3400 butt-n-top ........... $25,000. 1971 Cat 966 with log grapple ................ $33,000.

TRAILERS

2000 Superior tri-axle log trailer, c/w fresh MVI ................................................................$13,000. Jeep .......................................................... $3,000. 3 additional tri-axle trailers...$10,000 - $13,000. 1989 Peerless tri-axle lowbed 9 wide with removable gooseneck ..............................................$23,000. SOLD

MISCELLANEOUS

1000 gal. fuel tank on wheels c/w pump & hoses ....................................................................$2000. Miller big 40 welder.....................................$2000. SOLD

Call (250) 674-1346

JAMES WESTERN STAR TRUCK & TRAILER LTD.

50 ROSE ST. WILLIAMS LAKE, BC V2G 4G5

1-888-830-2191 • 1-250-392-5050 2008 KENWORTH T800 DAYCAB ISX LOGGGER ..... ................................................................................$77,500. 2005 WESTERN STAR TRIDRIVE LOGGER CAT ......... ................................................................................$59,500. 1998 ASPEN 10’ WIDE TRIDEM LOWBED WIDE NECK.....................................................................$49,500. 2007 WESTERN STAR TRIDRIVE CAT, WARRANTY, 18 SPD .................................................................$75,000. 2006 WESTERN STAR LOWMAX REBUILT S60 82” SLEEPER...............................................................$42,500. 1996 ASPEN 9’ WIDE TRIDEM LOWBED, WIDE NECK, SQUARE BACK ......................................$29,000. 2005 WESTERN STAR S60 18SPD LOGGER ............... ................................................................................$49,000. 2007 WESTERN STAR TRIDRIVE SMALL SLEEPER CAT ........................................................................$79,000. 1996 KENWORTH T800 CAT SMALL SLEEPER ......... ................................................................................$26,000. 2012 FREIGHTLINER TRIDRIVE, ISX, LOW MILES, WARRANTY ..................................................... $109,000. 1997 ARROW 10” WIDE TRIDEM LOWBED NARROW NECK, FLIP, NEW DECK ...............$37,500. 2003 SUPERIOR SUPER B ALCOA’S.............$45,000.

ANY FURTHER INQUIRIES CALL OR TEXT RANDY THERRIEN

1-250-305-4750

Page 62

Supply Post Western Canada Edition · supplypost.com

CEDAR RAPIDS WASH PLANT - Double eagle screw, 20 Hp/480v electric motor, 14' x 5' triple deck shaker with spray bars. EM SYNCHRoNUS GENERAToR - 250 KVA - 480 VOLTS 3 Phase - 1800 RPM. BERKELY WATER PUMP & DRIVE oN SKID - 800 GPM Drive - 60 HP, GE motor, 220 - 440 Volts - 3550 RPM.

HELP WANTED: Experienced Equipment / Feller Buncher Operator wanted for a logging contractor in the Rock Creek, BC area. Wages will commensurate with experience.

September 2015

SKREENQUIP SALES & RENTALS

CALL BILL 604-671-1066 Finlay 312 4ft x 8ft Triple deck with wash bars on all 3 decks, 3" water hook up, Deutz engine, Belts very good, variable speed feeder with hopper and hyd. remote controlled grid, set up to run 3 hyd conveyors from the machine, 5th wheel hook up ....... POR

All used during the 2013 Season. Last run October 10, 2013.

To apply, please call (250) 446-2788

12 yard hopper with 50ft removable under conveyor, c/w weigh scale, electric drive air operated discharge gate onto belt .... POR

$39,900 o.B.o. ............ PACKAGE PRICE

Or send resume to Christian Valley Service at:

Finlay Hydrasander sand dewaterer 80 - 100 YPH hydraulic drive, good condition ..................................................................... POR

See photos at: www.guyssandgravel.ca

Email: cvalleys@direct.ca

GUYTEC INDUSTRIES: (403) 347-5080

Fax: (250) 446-2727

FOR SALE

northern bc placer claims

ENGINES

Large Groups of Placer Claims For Sale in Northern BC

• ISX 2001, S/N: 25010766.................$5,000. • 8.3 CummInS, S/N: 45399105.....$ P.O.R.

Ross Stevens Welding Ltd. Port Alberni, BC

-Toodaggone Placer Claims $130,000 -Liard/Hyland River Claims $250,000 + 2% Royalty -Germansen Landing/Manson Creek area Claims starting at $70,000

Lots of history and great potential for gold recovery on all our properties Visit our Website for more info

CALL: 250-724-5451

ominecaplacergold.com claims@ominecaplacergold.com

SEPTEMBER SPECIALS

EquiPmENT for SAlE

ExCAvAToRS 2006 ZX200LC aux. hydraulics, QC, 2 buckets. .............................. $68,000 2000 Caterpillar M320 Wheeled Exc 9100 hrs .............................. $49,000 2007 Hitachi ZX50U-2, 1,885 hrs, blade, hydraulic thumb .......... $45,000 2008 Yanmar B7-5A “Z” Boom (Hitachi 75 size) ........................ $45,000 LoADER BACKHoE 2009 Case 580SM III 6200 hrs, A/C, cab, loaded, incl. Hoe Pac .... $52,500 RoLLERS 1995 Ingersol-Rand SD115D 84” smooth drum. ............................ $19,500 2008 Hamm HD12VV 660 hrs, 47" drums, lights, good unit. .........$27,500 (2) 2004 Ammann AR65 26” double drum walk behind. ........$3,500 ea. TRACToRS 2006 Deere 650J XLT A/C cab, new undercarriage. ......................$54,900

TANKS: 10,000 Gal., Propane Tank on skids ............................. $6,500 forKlifTS / loADErS: CAT 950 Side Shift, 20.5 x 25 tires, Skid Forks ............$11,000 CAT 936E Side Shift, 20.5 x 25 tires, ...........................$17,500 CAT 966C loader, 26.5 x 25 tires, Bucket & Grapple ..$17,000 CrANES:

For Sale

300 kw Genset, 50 Detroit, Low Hrs. .......$13,000 25 kW Isuzu, 50 kW Isuzu ................................Call 3,300 LB Demo Wrecking Ball.................... $1,200 1600 CFM Air Comp., Low Hrs .................$13,000 2 LNG Cryogenic SS Tanks ....................$5,500 ea. 8’ x 40’ Trommel Gold Wash Plant, Tilt-Up Grizzly, 300-400 Yds Per Hr...........................P.o.r. Magnets & Electromagnets, all sizes..... ......P.o.r. Mag Motor Starter, MCC’s, all sizes . .............Cheap! 32ft Ramp Barge, Truckable, Carries EX200.. $95,000 40' x 80 ft Bolt-together Butler Bldg. ......... $4/ft. 5' x 25 ft Rotary Trommel Screener .......... $5,500 Pumps: 4", 6", 8", 10", 12" ..........................Cheap! Pulverizers & Grinders, Hammer Mills ......Cheap! Transformers & Switch Gear, all sizes.......Cheap!

Phone: 604-250-5325 email: mike7777@shaw.ca

Zf Transmissions & DifferenTials

- Rebuilds & RepaiRs Moxy, Terex, Volvo, John Deere, case - specializing in off-highway applications - quality and cost-effective work - on-site testing and troubleshooting - available 7 days a week

Also offering on-site repairs and servicing of all makes of construction and agriculture equipment.

Dolphin Mechanical Services Ltd. Langley, Bc - call Eric 604-314-8032 dolphinmechanicalservices@telus.net

Grove AP 308, Carry deck, Cummins power ................ $9,000

EquipmEnt & parts For salE

2004 Ford F550 XL Super Duty, dump truck, 64,000 km, diesel, auto, pintle hook, tarp, like new ...............................................................$29,500

Grove RT 58, 9 Ton, Ford power, 17.5 x 25 tires.................. $4,000

1 Bucket Cylinder, fits Cat 320C............................................................. $1,000

TRAILERS 2007 Double A 14,000 lb Equipment Trailer, 2 axle, 16' x 7' deck, like new .......................................................................................................$7,500

Grove RT 655, 35 Ton, Detroit Power, 29.5 x 25 tires...... $14,000

1 Quick Attach, fits Cat 320C................................................................... $1,500

Shuttle Lift 3300 Carry Decks, Diesel & Gas for parts ......... P.O.R.

EFI Mat Grapple (near new) ................................................................. $3,200

TRUCKS 2003 Ford F750 Single Axle Dump Truck 284,000 km. . ............... $19,500

APPRAISALS • CONSIGNMENTS LOCATE & PROCURE • 45 YEARS EXPERIENCE

Cell: 604-626-6803 TUNDRA EQUIPMENT CONSULTING Hugh Bruggen-Cate, Abbotsford, BC

Email: hbruggencate@shaw.ca

Mini Crawler Crane, Diesel 1,200 lbs., 21 feet .................... $11,000

offiCE: 250-997-5868 CEll: 250-997-7455

1 set Imac Clam Buckets.......................................................................... $1,000 56” Clean Up Bucket, fits Cat 320C..................................................... $2,500 Hultdins Blowdown Saw....................................................................... $5,000 1 NEW Imac Hydraulic Outrigger ....................................................... $8,000

phone Dan For more info:

250-260-6012 or 250-308-7286

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 63

Join IronPlanet® and Cat Auction Services

LIVE UNRESERVED PUBLIC AUCTION October 21, 2015 | Edmonton, Alberta EXCAVATORS

WHEEL LOADERS

MOTOR GRADERS

OFF-ROAD TRUCKS

& MORE

HOSTED BY PREVIEW LOCATION

AUCTION LOCATION

Acheson Road West 825 – 53016 HWY 60 Acheson, Alberta T7X 5A7

Marriott Resort Edmonton River Cree 300 East Lapotac Blvd Enoch, Alberta T7X 3Y3

Our exclusive IronClad Assurance® and guaranteed inspection reports enable buyers to bid with a high degree of confidence resulting in better auction prices for sellers

Consign today - Please contact your local representatives MANAGING DIRECTOR, CAT AUCTION SERVICES CANADA

GORDON MCDOUGALL NORTHERN ALBERTA

CHRIS HUOT

SOUTHERN ALBERTA

KYLE BATES

(587) 357-6690

(780) 914-5299 (403) 635-5953

MANAGING DIRECTOR, IRONPLANET

SUE MCGREGOR

OIL & GAS

STEVE WICKS BRITISH COLUMBIA

ROB DICKSON

Cat Auction Services is an IronPlanet Marketplace

WWW.IRONPLANET.COM California Auction Company Bond #70259785. ©1999-2015 IronPlanet, Inc. All rights reserved. IronPlanet IronClad Assurance and Auctions You Can Trust are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.

(780) 238-1560

(315) 744-2899 (778) 847-7957

Page 64

Supply Post Western Canada Edition · supplypost.com

September 2015

September 29 – October 1, 2015 Louisville, KY

OPERATE the newest equipment at the LARGEST tradeshow for the utility industry featuring over 850 EXHIBITORS

Get your badge now at www.icuee.com to save 50%

YOUR TRUCK & TRAILER CONNECTION, SINCE 1971

SECTION 3

WWW.TRUCKPOST.CA SEPTEMBER 2015 · PAGE 65

EXPERIENCE MATTERS! Ed Murray: 250-812-2925 Garry Shelton: 250-715-5088 Dave Polack: 250-213-2755 Pat McConnell: 250-380-8838

TWO LOCATIONS TO SERVE YOU! Victoria: 2005 Keating Cross Road

Toll Free: 1-888-652-9139 Fax: 1-250-652-9130

TRAILERS

Duncan: 3111 Cowichan Valley Hwy.

Toll Free: 1-866-746-1515 Fax: 1-250-746-8064

VE WE HA ! RUCKS LOG T

THE 5700XE WESTERN STAR TRANSFORMED!

• DD16, 600HP, 18 Speed Transmission • 20,000# front, 69,000# rears • Loaded Log Truck Specs. • Trucks in Stock!

• 2016 5700XE Day Cab Demo Tractor • DD13, 470HP • DT12, Auto Transmission • 40,000# rears w/ Airliner Suspension • Loaded with options!

2016 Western Star 4900SB Tridrive Logger with Pro Fab Quad Logger Rig Up

MIXER TRUCKS IN STOCK • 2016 Western Star 4800 Tandem Steer Mixer Truck • DD13 - 450 HP, RTO16909ALL transmission • Well-equipped mixer spec • Terex 10.5 metre Bridge Max Mixer • 2 in Stock - Ready For Work!

2016 WESTERN STAR 4900SB • DD16 - 600 HP • 18 speed transmission • 20,000# front axle, 46,000# rear axles • C/W Nahanni 16'6" • 450 Hardox Tub Gravel Box

Call For Details

JUST IVED ARR

2016 Freightliner M2-106, Cummins ISL 350HP, Allison 3000 automatic, 20,000# front, 40,000# rears. Ready for Rig Up!

2016 Western Star 4700, DD13 470 HP, 18 spd transmission, 46,000# rears, airliner suspension. Dump or Crane Specs!

2015 Mitsubishi Fuso FE160, Landscaper Special, 9' dump box, storage box for tools and equipment. Very Nice Rig Up!

2006 Western Star 4900SB, MBE4000 - 450HP, 18 speed trans, 40,000# rears, engine and trans rebuilt, 838,000 kms. Very Clean Truck!

2007 Mitsubishi Fuso FE180, Hiab 035 Crane, 12' deck, power side lift. Clean Truck in Great Condition!

2005 Western Star 4900, Cat 550, 18 spd trans, 20,000# front, 46,000# rears, DC frame, 525,000 kms, certiﬁed and very clean.

www.prtruckcentre.com

Page 66

Supply Post Western Canada Edition · supplypost.com

Navistar First To Market With Eaton Procision Dual-Clutch Transmissions

tions and best-in-class low speed manoeuvrability thanks to features such as Hill Helper, Creep Mode and Tap Down Shifting. “Customers told us that they wanted features that made their trucks easier to drive,” said Jeff Carpenter, Eaton Medium-Duty Procision engineering manager. “So, we engineered a host of features that instil confidence and maximize efficiency for operators with routes on hilly, difficult terrain, or those who navigate tight turns and traffic as part of an urban route.” Eaton is a recognized leader in commercial vehicle transmissions. To prove the reliability of Procision, over 100 truck years of testing in a variety of geographies, vocations and duty cycles were performed. This confidence is expressed by a 3-year/unlimited mile warranty which covers the complete system— including the dual-clutch module—in commercial vehicle applications, and a 5-year/unlimited mile warranty in school bus applications. b

Navistar announced operation for any driver,” includes features such as that it will be first-to-mar- said Jeff Sass, Navistar se- Eaton Dynamic Shifting, ket with the Eaton Proci- nior vice president, North which allows the transsion line of dual-clutch America Truck Sales and mission to automatically transmissions for its In- Marketing. “Coupled with switch between economy ternational® DuraStar me- the reliability of our me- and performance shift dium-duty trucks and IC dium-duty platform, the schedules based on mass, Bus CE series school bus- Eaton Procision transmis- grade and driver demand. es, available in late 2015. sion delivers the uptime Available torque, engine Based on Eaton’s testing, and efficiency our cus- acceleration and grade the new 7-speed transmis- tomers require in many drive dynamically modisions deliver a significant driving environments.” fied base shift results. fuel economy advantage The Eaton Procision Economy and perforcompared to a similarly dual-clutch technol- mance shift tables can be equipped vehicle with a ogy allows for more ef- adjusted to tune an overtorque converter auto- ficient acceleration from all calibration to meet any matic transmission. The a stopped position and customer’s specific needs. Eaton Procision transmis- optimizes shift points Eaton Procision transsion features a dual-clutch that will efficiently get missions utilize a new design and electronic to the highest gear. synthetic transmission shifting that uses grade, Gear changes are made fluid that provides comvehicle weight and throt- by swapping the engine ponent protection while tle input to provide opti- torque between clutches reducing maintenance mal fuel efficiency and with the next gear prese- costs, as part of 150,000 smooth, continuous deliv- lected. The dual-clutch mile or 4-year lube and ery of torque. module is fully contained filter change intervals. “Through our partner- within the transmission, The internal sump filter ship with Eaton, we’re hydraulically controlled and electrical system do offering our customers and oil cooled for ex- not require maintenance. advanced technologies tended life. Procision gives drivers that provide safe and easy The Eaton Procision more Camex_SP_Ad_Fuel 260315.qxp_Supply Post Ad 2015-08-11 1:12 PM control Page 1 in all situa- Source: Navistar

September 2015

Treffler Autokran Receives Fully Refurbished Terex AC 40 City Crane “For the last 15 years, our AC 40 City crane has always come through for us when doing overhead crane installation and machine setup work. Its compact design and powerful telescoping system make it unbeatable when it comes to indoor projects, which is why we decided to arrange for Terex to fully refurbish it,” reports Dirk Koslowski, who manages the Treffler branch office in Ingolstadt and picked up the newly refurbished AC 40 City crane in person at the Terex Bierbach plant in July. The decision to refurbish the unit, which was made at the crane service provider’s Munich headquarters, was partially based on the financial factors involved: “Together with our fleet managers Christoph Kleinert and Jürgen Kleinert, we went through a number of options that would allow us to continue to use

the crane, and ultimately decided to go for full refurbishment,” explains owner Petra TrefflerTomaschko. And with good reason: By choosing to have its AC 40 City crane refurbished, Treffler is getting a machine that is virtually as good as new, and with a twelve-month manufacturer’s warranty on all replaced components to boot. This means that the unit is now ready to take on many more projects in the coming years while meeting all of the customer’s performance and safety needs. “We’re more than happy with the work that Alexander Schnebel and his workshop team in Bierbach did,” Koslowski says. “From the advice we got in advance, to the way they carried out the work, to the final handover – everything was picture perfect.” b Source: Terex

View over 900 new and used Trucks, Trailers & Construction Equipment on-site or on-line at www.camex.com

CAMEX Fuel/Lube Trucks

& Mechanic’s Trucks

Fuel/Lube Combination Walk-In Insulated Van Body w/ Heaters Oil, Grease, Anti-Freeze, Air

With the largest selection of onsite inventory, Camex provides a one-stop shop for all your equipment needs. Camex Equipment Sales & Rentals Inc. 1511 Sparrow Drive Nisku, Alberta, Canada T9E 8H9

Fuel Trucks 1000 Us Gal - 4400 US Gal Capcity

NEW & USED SALES

RENTALS

RIG-UP MANUFACTURING

Lube Trucks

Mechanics Trucks

Walk-In Winterized Van Body

Lifting Crane, Air Compressor, Welder

PARTS & SERVICE

EQUIPMENT PROCUREMENT

FINANCE

Supply Post Western Canada Edition · Our Readers Are Your Buyers

western star trucks

September 2015

Pink Western Star Wallboard Truck Raises “Serious” Money Wallboard distribution trucks are an integral part of the safe and efficient delivery of wallboard and other materials to construction jobsites. A very special Western Star vehicle recently raised hundreds of thousands of dollars for breast cancer

research. The distinctive pinkand-white Western Star wallboard truck was auctioned off at the Association of the Wall and Ceiling Industry and Intex Expo in Long Beach, Calif. A stunning bid from Gypsum Management and Supply,

Inc. (GMS) of $500,000 produced more than $200,000 of direct support to the Marshfield Clinic Research Foundation of Marshfield, Wis. The “Reaching for a Cure” fundraiser was collaboration between Marshfield, Wisc.-based V&H Inc.

– Heavy Trucks, a Western Star dealer, and FASCAN International of Baltimore, the U.S. distributor of Fassi articulating cranes. The winning bid was made by GMS, an Atlanta-based distributor of construction supplies, which will use it to deliver drywall. The truck, a Western Star 4700SB with a Fassi 360SE.24 wallboard crane, was designed and completed by V&H Trucks, of Marshfield. “We wanted to use our

Page 67 whenever it’s on the job,” said Ann Demitruk, Director of Marketing for Western Star. For more information, go to www.WesternStar Trucks.com. Western Star Trucks Sales, Inc., headquartered in Fort Mill, S.C., produces tough custom trucks for highway and vocational applications. Western Star is a subsidiary of Daimler Trucks North America LLC. Daimler Trucks North America produces and markets Class 5-8 vehicles and is a Daimler company, the world’s leading commercial vehicle manufacturer. MCRF, a division of Marshfield Clinic, was founded in 1959. It is the largest private medical research institute in Wisconsin, with 31 Ph.D. and M.D. scientists and 155 other staff. In addition, approximately 150 physicians and other healthcare professionals throughout the Marshfield Clinic system are engaged in medical research. b

expertise in fabricating this kind of vehicle to support the Marshfield Clinic Research Fund and the important work of diagnosing and treating cancer,” said Tim Wolf, general sales manager at V&H Inc. – Heavy Trucks. “Pink-and-white is an unusual and eye-catching colour combination for a Western Star truck and we’re proud that this vehicle will be rais- Source: Western Star Trucks ing awareness of the fight and Marshfield Clinic Reagainst breast cancer search Foundation

More units available at www.internationalmachinery.com 1-844-460-9954 | Maple Ridge, BC

2011 WESTERN STAR 4900, 560 DD15, 18 SPD, 20 X 69 AXLES, 264K MILES, LOADED TRI-DRIVE. $109,500

2011 PETERBILT 367, 550 CAT, 18 SPD, 20 X 69 AXLES, 36" BUNK, LOADED TRI-DRIVE. $104,500

2011 KENWORTH W900L, 0 MILES ON INFRAMED 550 ISX MOTOR, WTY, 18 SPD, 14 X 46 AXLES, 274K MILES, LOADED LONG HOOD. $106,500

2011 PETERBILT 367, LAZER 5 COMPT 2010 WESTERN STAR 4900, 515 FUEL TANKER, REELS & METERS, TANK DETROIT, 18 SPD, 20 X 46 AXLES, 150K FRESHLY CERTIFIED, 475 CAT, 18 SPD, MILES, LOADED. $89,500 36" UNIBILT, 162K MILES, LOADED FUEL TRUCK. $147,500

2009 KENWORTH T800, 485 ISX, 18 SPD, 46K REARS, 36" AEROCAB, 400K MILES, LOADED. $87,500

2007 GMC C5500 SERVICE TRUCK, 300 HP, AUTO, 4X4, BRUTUS BODY, 3304 CRANE, VANAIR COMPRESSOR, 81K MILES, LOADED. $79,500

2012 FREIGHTLINER CORONADO, 560 DD15, 18 SPD, 20 X 46 AXLES, 157K MILES, LOADED. $96,500

View our online inventory on your mobile device

Page 68

Supply Post Western Canada Edition · supplypost.com

International Announces Open Performance Testing Event International Truck invited each of its Class 8 competitors to participate in an open performance testing to compare fuel economy and drivability of their new trucks. During the week of August 31, at the Navistar Proving Grounds in New Carlisle, Ind., International Truck’s Class 8 competitors will have the opportunity to bring their two best performing vehicles with regards to fuel economy and drivability. “The heavy-duty prod-

US ON FACEBOOK!

If you’re a fan of

visit us on Facebook and give us the thumbs-up!

On Facebook, search Supply Post

will be switched from “Control” to “Test” vehicle between test segments. Tires will be standardized across all vehicles and will be provided by Navistar, sets will be randomly assigned for each vehicle. Trailers will also be standardized and provided by Navistar for all units. Aerodynamic Coastdown Testing Aero Coastdown testing will be performed at the Navistar Proving Grounds and will follow the recommended practices SAE 1263, “Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques” and SAE 2263, “Road Load Measurement Using Onboard Anemometry and Coastdown Techniques.” A tire set specifically for coastdown testing will be standardized across all vehicles and will be provided by Navistar. A coastdown dedicated trailer will also be used for all vehicles and will be provided by Navistar along with necessary instrumentation. Additional areas being tested will include ride vibration and harshness, curb-to-curb cornering ability, forward visibility and interior noise. “We’re all proud of our trucks, and I believe that running our vehicles in an open and transparent forum, side-by-side, will not only raise the water mark but will also benefit each of our customers in this industry,” Sass added. b

ucts we are building today are the highest quality, most fuel efficient trucks we have built in decades,” said Jeff Sass, Senior Vice President, North America Trucks Sales & Marketing. “We have worked hard to ensure our heavy-duty products lead the way in fuel economy, driver appeal and uptime performance, and we want to prove it.” The vehicle specifications for the test include: Class 8, on-highway sleeper; model year 2016, calendar year 2015 builds; include only factory installed options (hardware, software, and fluids), and currently meet compliance and are capable of delivery to all customer applications; and must fall within total mileage range of 2,500 – 15,000 miles to maintain consistent break-in levels. Fuel Economy Testing Fuel economy testing will occur on a closed-track at the Navistar Proving Grounds in New Carlisle, Ind., and will follow the protocols called out by the SAE (Society of Automotive Engineers) Recommended Practice “Joint TMC/SAE Fuel Consumption In-Service Test Procedure Type III (SAE J1526).” The test will be executed with a gross combination weight (GCW) of approximately 65,000 lbs. and the vehicle will be driven at typical highway operating speeds. Drivers and trailers Source: Navistar

September 2015

Mack Manufacturing Thinks “Small” With New RC Crane Attachments

Mack Manufacturing Inc. was in the forefront when diesel-powered crane buckets and grapples with remote controls first appeared in the material handling industry. With the latest addition to its lineup of attachments, Mack set its sights on “small:” a series of self-contained remotely operated attachments ranging from as little as 3/8 cubic yard up to a 20 yard capacity. According to Mack’s Vice President of Sales & Marketing, Matt Davidson, the new small-sized grapples and buckets were developed to solve big problems for customers in forestry, recycling, aggregate and shipping industries. “We have been producing large units like this to handle bulk loading for several years,” he explains.

operator’s sight, and the mill would have to send a crew into the equipment to free up the jam.” The paper mill ordered the self-contained grapple from Mack so an operator can use the remote control to pick out a stuck log. The crane, working down below the debarker line, simply lifts and positions the grapple with directions for the remote operator. “It’s much safer than the old method,” Davidson continues. “The remote operator can maneuver the grapple precisely to clear the jam in far less time. It can save a day’s production.” Quick response Because they are fully self-contained, the new Mack attachments can swing into action quickly. Simply attach the grapple or clamshell bucket to the crane’s hook, start the engine, and it’s ready to start moving product. Any rope crane, hydraulic crane or even an overhead crane can put the attachment into service as needed to keep conveyors and processing equipment moving, or to perform other light-duty tasks efficiently. The smallest of the Mack attachments are powered by 14 HP aircooled Hatz diesel engines. The largest models use 85 HP air-cooled Deutz diesels. The attachments are maneuvered by hand-held radio controls similar to those used with Mack’s production-sized self-contained models. b

“But we found many customers need similar attachments sized smaller for more mobility, faster deployment and greater precision in moving material.” Getting you out of a jam The new Mack attachments can handle a wide array of materials, including logs, rocks, scrap metals, waste and bulk material. The first unit Mack delivered was a 3/8 cubic yard 5-tine grapple, built for a paper mill to clear jammed logs from its debarking process. “Jams can be a costly problem, whether you’re processing logs like this, or pulling oversized, wedgedin material from a grinder or a shredder. In this case, a stuck log could stop production for 6 hours or more. The jam could happen 60 feet above the crane Source: Marketing Stratelocation, out of the crane gies & Solutions

Want a Raise??? LIGHTEN UP!! Maximize Payload

• High Strength Swedish Steel • One piece or folding stakes • Bolted Band Clamps allow any frame rail width • Durable factory Powder Coated paint

Timber Bunks

Lightweight Swedish Steel Innovative Designs

Call 877.563.8899 or 250.563.8899 Prince George, BC www.prolenc.com

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Nation’s Top Truck Drivers Compete In St. Louis More than 400 top professional truck drivers from across the country headed to St. Louis for the 78th annual “Super Bowl of Safety,” the 2015 National Truck Driving Championships and National Step Van Driving Championships, hosted by American Trucking Associations. “Safety is the trucking industry’s top priority,” said ATA Chairman Duane Long, chairman of Longistics, Raleigh, N.C., “and each year, the industry’s commitment to safety is displayed at the NTDCs. The competitors here are

the safest drivers on the highway and an example for us all.” Over three days, 431 competitors from all 50 states, including 39 firsttime participants, representing 85 different companies vied for honours in one of eight different classes and the title of Bendix National Truck Driving Championships Grand Champion. The festivities began on August 13 with the Breakfast of Champions, followed by three days of competition behind the wheel on a challenging Souce: ATA

Longest Election Campaign In Modern Canadian History Begins The 2015 Canadian federal election will be held on Oct. 19, 2015 to elect members to the House of Commons of the 42nd Parliament of Canada. Prime Minister Stephen Harper met with Gov. Gen. David Johnston on Aug. 2 to ask that parliament be dissolved, effectively launching the campaign for a federal general election. At 78 days, the campaign will be the longest in modern Canadian history. A typical election period is 37 days. There was

Liberal Party; Elizabeth May, Green Party; Giles Duceppe, Bloc Québécois and Jean-François Fortin, leader of the Strength in Democracy Party. According to an article in Daily Commercial News, which interviewed Association President Michael Atkinson, the Canadian Construction Association will be keeping close tabs on the election and will be posting relevant information on its website throughout the campaign. While non-partisan, the association is looking for all parties to make “a clear, substantial and sustained commitment to infrastructure investment.” b

some criticism of Harper for launching a lengthy campaign that will cost Canadian taxpayers more. According to Elections Canada, a five-week, 35day campaign costs about $375 million to run. Parties are also reimbursed for half the money they spend during an election campaign. Candidates for Prime Minister include incumbent Harper from the Conservative Party; Thomas Mulclair, New Democratic Party; Justin Trudeau, Source: AED

JCB Backhoe Loader To Help Clinton Foundation In East Africa A JCB 3DX backhoe will soon be in service in Iringa, Tanzania as part of the Clinton Foundation’s agricultural development initiative for smallholder farmers in East Africa. The Clinton Foundation is a non-profit organization established by former U.S. President Bill Clinton to convene businesses, governments, NGOs and individuals to improve global health and wellness. The foundation’s agriculture initiative strives to “grow food to feed the world”

driving course and other tests of their knowledge of safety and of the industry. Competition concluded on August 15 with the crowning of the Bendix National Truck Driving Championships Grand Champion, as well as with awards for drivers in every vehicle class and for the top state delegation. The Allied Committee for the Trucking Industry is premiere sponsor of the 2015 National Truck Driving Championships and National Step Van Driving Championships at the America’s Centre Convention Complex and Edward Jones Dome in St. Louis. b

Tractors Tanzania’s parent company, Muscat Overseas, has been a JCB dealer for over forty years and is the market leader for agricultural equipment in the area. “We are very pleased that JCB equipment will be used for this initiative in Tanzania and look forward to the positive impact it will have on the community,” said Thom Peebles, Vice President of Marketing for JCB North America. “JCB has a long-standing philosophy of giving back to communities around the world and the Clinton Foundation development initiative ties in well with our efforts.” b

through the education of soil utilization, yield and soil mapping, hybrid maize seeds, herbicides, crop protection and improved farming practices and processes. The foundation has partnered with JCB and dealer Machines and Tractors Tanzania to drive rural development in East Africa, where inadequate farming techniques and out-of-date equipment have caused insufficient output and failure to meet market demand. Machines and Source: JCB

Page 69

19880 96TH Ave, Langley BC • 604-888-2888

TRUCKS FOR SALE CALL

$79,995

2015 INTERNATIONAL LONESTAR ISX 15, 550 HP, 18SPD, 244" WB, 73" HI-RISE, 13.2/SUPER 40 AXLES, LEATHER, LOADED.

2012 FREIGHTLINER CASCADIA 72" CONDO DD15 505HP, 13 SPD, 12/40’S, GOOD RUBBER, READY TO GO, SUPER CLEAN, 750K KM, LOCAL BC TRUCK. CONSIGNMENT UNIT.

Stk# FN717996

CALL

Stk#: GN718126

2016 INT’L 9900 ISX 15, 525 HP, 18 SPD, 244" WB, 72" HI-RISE, LEATHER, LOADED, B-TRAIN, 13.2/46 AXLES. CALL FOR DETAILS.

2 TO

SE FR CHOO

2016 INTERNATIONAL DURASTAR CUMMINS ISB, 260 HP, 254" WB, 33K GVW, 6 SPD ALLISON, HYD. BRAKES, 24' COLLINS DRY VAN, LOADED W/EXTRAS, ARRIVING SOON.

CALL

Stk #: 5900-17

2016 INTERNATIONAL PROSTAR DAY CAB 6X4 CUMMINS ISX 500 HP, 18 SPD MANUAL OR AUTO, 185" WB, 13/46S, 3.70 RATIO, B-TRAIN, ALUM. WHEELS, LOADED.

2014 INTERNATIONAL PAYSTAR SBA 6X4, CUMMINS 550 HP, 18 SPD, 20/46K AXLES, ALUM WHEELS, LANGFAB 17' TUB DUMP, LEATHER, LOADED, ALUM HYD TANK & TOOLBOX, READY TO GO!

CALL

$58,500

Stk #: CH548201

Stk #: GH002897

2012 INTERNATIONAL DURASTAR EXT CAB LO PRO DT466 260HP, ALLISON, 16' DECK + 4' BEAVER TAIL RAMPS, 31K GVW, AIR BRAKES, SEATING FOR 5, LOCAL LIKE NEW. ONLY 17K KM.

2016 INTERNATIONAL TERRASTAR 4X2 300HP, 195" WB, 19,500 GVW, 6 SPD ALLISON, HYD. BRAKES, 16' COLLINS DRY VAN, LOADED W/EXTRAS.

$109,995

$59,995

NEW

2013

2013 INTERNATIONAL PROSTAR, 500HP, 18 SPD, 73" SKYRISE, DBL BUNK, 13.2/40 AXLES, BUNK A/C, FULL AERO, LOADED, 2 REMAINING, WHITE BLOWOUT PRICING FROM...........$109,995.

Stk #: 9C128826

Stk# GH108012

2009 INTERNATIONAL PROSTAR B-TRAIN, SLEEPER, ISX15 525HP, 18 SPD, 13/46’S, GOOD RUBBER, READY TO GO, CLEAN TRUCK, 617K KM, 56" BUNK, LOCAL BC TRUCK.

Phone: 604-888-2888 www.harbourinternational.com

Supply Post Western Canada Edition · supplypost.com

September 2015

peterbilt motors company

Page 70

Peterbilt Model 567 Set-Forward Front Axle Truck In Full Production Peterbilt Motors Company announced its new vocational Model 567 in a set-forward front axle configuration is now in full production. Peterbilt

hosted Con-Tech Manufacturing to drive the first full production truck off the assembly line at Peterbilt’s Denton, Texas, manufacturing facility.

“Customer excitement has been high for the full availability of our newest vocational workhorse, the Model 567 in a setforward front axle (SFFA)

TOLL-FREE: 1-800-661-3406

configuration,” said Robert Woodall, Peterbilt Assistant General Manager of Sales and Marketing. “Peterbilt’s Model 567 SFFA lets customers maximize payloads while helping meet state and federal bridge law requirements with a chassis that optimizes weight distribution. It’s a great truck for mixer applications and Con-

MAGNUM MEANS MORE

LOGGING TRAINS AND QUADS IN STOCK

QUADS B-TRAINS

LOWBEDS

Tech was an ideal choice to visit and participate in this special milestone with us.” Peterbilt introduced the Model 567 SFFA earlier this year during the World of Concrete show in Las Vegas. “It was a great experience to tour Peterbilt’s plant and see firsthand the state-of-the-art assembly processes and the quality that goes into every truck they build,” said Dan Welsh, President and Co-owner of Con-Tech Manufacturing. “Peterbilt trucks are a great way for us to showcase our High Performance BridgeKing and Extreme Duty concrete mixers.” Con-Tech, founded in 2006, bases both its headquarters and production in Dodge Center, Minn. The company designs, manufactures and installs readymix bodies, such as its High Performance Drum and specialized packages such as the BridgeKing model (for optimized weight distribution and bridge law compliance). “It was a nice honour to drive the first truck off the assembly line and we’re excited that it will soon be equipped with one of our leading High Performance mixers,” said ConTech Vice President and Co-owner Grant McNeilus. “The Peterbilt Model 567 SFFA is lightweight, durable and maneuverable. Optimized axle placement

and exceptional weight distribution makes it an excellent match for our BridgeKing model which helps customers comply with

“It was a nice honour to drive the first truck off the assembly line”

restricted-weight roadways and bridges.” The Model 567 SFFA is available in both 115- and 121-inch BBC lengths. The 115-inch BBC has a bumper to front axle distance of 29 inches and the 121inch BBC has a bumper to front axle distance of 31 inches. Peterbilt also offers the Model 567 in a set-back front axle configuration, also available in a 115- or 121-inch BBC length. Both Model 567 configurations are standard with the PACCAR MX-13 engine with up to 500 horsepower and 1,850 lb.-ft. of torque. They are available as a day cab or with Peterbilt’s complete lineup of detachable sleepers, including the new 58-inch sleeper. b Source: Peterbilt

#26 19695 - 96th Ave, Langley, BC

TRIAXLES For all sales inquiries please contact

Rob Mumford: 604-996-7544 | rob@magnumtrailer.com

www.magnumtrailer.com

• ENGINE REPAIRS • BRAKES MONDAY to FRIDAY 7:00am to Midnight

• SAFETY INSPECTIONS • FLEET MAINTENANCE SATURDAY 8:00am to 8:30pm

604-888-3838

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

CVSA’s 2015 Annual Brake Safety Week Is September 6-12 During the week of Sept. 6-12, 2015, law enforcement agencies across North America will conduct brake system inspections on large trucks and buses to identify out-of-adjustment brakes and brake-system violations as part of the Commercial Vehicle Safety Alliance’s (CVSA) Brake Safety Week. Outreach and educational efforts by commercial motor vehicle (CMV) inspectors, participating motor carriers and others in the industry also take place during Brake Safety Week and are integral to the success of the campaign. Properly functioning brake systems are crucial to safe CMV operation.

CMV brakes are designed to hold up under tough conditions, but they must be routinely inspected and maintained carefully and consistently so they operate and perform properly throughout the vehicle’s life. Brake Safety Week is an annual outreach and enforcement campaign designed to improve commercial vehicle brake safety throughout North America. Brake-related violations comprised the largest percentage (representing 46.2 percent) of all out-of-service violations cited during Operation Airbrake’s companion International Roadcheck campaign in 2014, which is focused on both vehicles and drivers.

may include some Level I Inspections and, in the 10 jurisdictions currently using performance-based brake testing (PBBT) equipment, overall vehicle braking efficiency will be measured. These systems include a slow speed roller dynamometer that measures total vehicle weight and total brake force from which braking efficiency is determined. The minimum braking efficiency for trucks is 43.5 percent, required by U.S. federal regulation and the CVSA Out-of-Service Criteria. Last year, inspectors from participating agencies inspected 13,305 vehicles during 2014 Brake Safety Week and placed 2,162 commercial vehicles out of service (OOS) for brake violations. Of the vehicles inspected, the OOS rate for all brake-related violations conducted in North America was 16.2 percent, compared with 13.5 percent for the 2013 event. The OOS rate for brake adjustment was 10.4, and the OOS rate for brake components was 9.3 percent. b

Improperly installed or poorly maintained brake systems can reduce the braking capacity and increase stopping distance of trucks and buses, which pose serious risks to driver and public safety. Brake inspections conducted during Brake Safety Week include inspection of brake-system components to identify loose or missing parts, air or hydraulic fluid leaks, worn linings, pads, drums or rotors, and other faulty brake-system components. Antilock braking system (ABS) malfunction indicator lamps also are checked. Inspectors will inspect brake components and measure pushrod stroke where applicable. Defective or out-of-adjustment brakes will result in the vehicle being placed out of service. Read more about CVSA’s inspection procedures. Additional inspections Source: AMTA

Page 71

Indiana Contractor Named Winner Of The 2015 Doosan One-Year Lease Contest Doosan Infracore Construction Equipment America has announced the winner of its 2015 “Win a One-Year Lease” contest. Richard Johnston, of Westville, Indiana, won a one-year lease of a Doosan DX140LCR-5 reduced tail swing crawler excavator. Johnston, owner of Johnston Landscaping Maintenance Inc., owns and operates a Doosan DL250-3 wheel loader, which he purchased from Ronson Equipment in Westville. He uses it yearround for various bulk material handling, landclearing projects and snow removal. Using the oneyear lease on the DX140LCR-5, Johnston will be able expand his customer base by taking on a variety of bigger landscaping projects including digging trenches, moving rocks and clearing trees. “This opens up a whole new venue of possibilities and will be the dream

machine for me,” Johnston says. “Confidence, quality and durability are all attributes we have with our Doosan DL250-3, so adding a DX140LCR-5 to our fleet will move us into a whole new world of capability.” Entrants were asked to answer the question “How can Doosan make your business stronger?”, and entries were judged on the answer. Company officials said Johnston’s entry was exactly the type of essay and personal story they were looking for. “Johnston is a loyal Doosan customer who is looking to expand his landscaping business by using the right equipment,” said Laura Ness Owens, Doosan North America director of communication. “The DX140LCR-5 is the perfect excavator to complement Johnston’s expanding equipment fleet. We look forward to helping him be successful.” b Source: Doosan

Mark Salmon Sales Manager marksalmon.pm@gmail.com C: 250-889-1529

1946 Mills Road, Sidney, BC Office: 250-656-1689 | Fax: 250-656-1305

™

Trucks For Sale

1-855-656-1689

Cranes For Sale

GC Power Forklifts STOCK UNITS:

NEW NRC UNITS IN STOCK

· 20TB22 Carrier on Freightliner M2 106 SOL · Quick Swap-Lightweight detachable towing unit for your tractor D · 20,000 lb & 40,000 lb Carriers in stock, ready for chassis of your choice

2011 PETERBILT 367, MANITEX 2281, READY TO WORK - CALL MARK

• 5000 lbs, Nissan K25 Engine, LPG, Pneumatic Tires, 3 Stage, 4.5 M FFL Mast, Side Shift • 6000 lbs, LPG, Pneumatic Tires, 3 Stage, 4.5 M Mast, Side Shift. • 10,000 lbs, Perkins Diesel, Pneumatic Tires, 3 Stage, 5 M Mast.

2014 VOLVO VHD, I-SHIFT, 20' DECK, PM35528 SP. LIFTS 1985 LBS @ 68'11".

PM 33528 SP, Max Lift 33,070 Lbs

SIDNEY SHOP - CRANE INSPECTION & REPAIR, DECK FABRICATION | 1-855-656-1689

PM16525S Max Lift 6970 lbs, Lifts 1635 lbs @ 47'5"

Page 72

Supply Post Western Canada Edition · supplypost.com

September 2015

In 2014, electricity production in the 34 members of the OECD fell slightly to 10 712 TWh a decrease of 0.8% or 86 TWh compared to 2013, according to provisional data recently released by the International Energy Agency (IEA). This decline was driven by lower fossil fuel and hydro production that were only partially offset by growth in non-hydro renewables (+8.5%) and nuclear (+0.9%). The growth in nonhydro renewable electricity was driven by solar and wind. In 2014, solar photovoltaic overtook solid biofuels to become the second largest source of nonhydro renewable electricity in OECD Europe, with a share of 17.3%. Since 1990, solar photovoltaic has been increasing at an average growth rate of 44.6%

per year, and wind at 27.1% per year. Growth in electricity generation continues to be driven by non-OECD countries. The latest data released by the IEA shows that global electricity generation increased by 2.9% between 2012 and 2013. The data shows clearly two distinct trends. Electricity generation is levelling off within the OECD, with a negative annual average growth rate (AAGR) of -0.35% between 2010 and 2013, while it is strongly rising in the rest of the world (AAGR 5.6%). As a consequence, in 2011 non-OECD countries produced more electricity than OECD countries for the first time in history. Data for 2013 show that renewable electricity generation overtook natural gas to become the

second largest source of electricity worldwide producing 22% of total electricity or 5 130 TWh. In addition, in 2013, global non-hydro renewable electricity, which rose to 1 256 TWh or 5.4% of global electricity production, surpassed oil-fired generation for the first time ever. In the same year, electricity generated by coal reached its highest level yet at 9 613 TWh, representing 41.1% of global electricity production. The growth in coal generation was driven by nonOECD countries. On a global level, the majority of renewable energy is consumed in the residential, commercial and public services sectors. However, two patterns can be identified: in the non-OECD countries only 22.3% of renewables are used for electricity and heat production and

freeimages.com

Renewable Electricity Generation Climbs To Second Place After Coal

60.7% in the residential, commercial and public sectors; in the OECD countries, more than half of the renewable primary energy supply (58.5%) is used to generate electric-

New Reitnouer All Aluminum flatdecks, stepdecks, quad axles & double drops LEASE A FULLY LOADED QUAD AXLE FLATDECK FROM $1295/MONTH WITH $0 DOWN O.A.C.!

New 55/60 TON Blackhawk lowbed 10’ wide x 24’ working deck, squared tail, tandem jeep & booster ready, 14 hp power pack, gooseneck fenders. Wider beam centres for added strength and stability.

New Temisko Super B Aluminum Flo-Thru Chip Trains T.A.C. legal with 49” BC spreads or 60” tridem lead, 6,000cu. ft. capacity, 20 years of building rugged trailers for Canadian hauling.

IN STOCK NOW

IMCO 53’ High Cube Chain-Out, smoothwall aluminum, hyd. flip tarp, unloads in 5 mins, new cert.

1996 Wilkens 53' Walking Floor 60” spread tridem, new roll tarp, new barn doors, new CVI.

604-852-3303

3387 MCCALLUM RD, ABBOTSFORD, BC V2S 7W6

www.specializedtrailers.ca

ity and heat. The new data are available in detail from the Renewable Information 2015 and Electricity Information 2015 databases and books. Summaries of

the findings are available for free download for Renewable and for Electricity . All 2014 data are provisional. b Source: IEA.org

JCB Dealer Network Expands Into Western Canada Noble JCB, a new JCB dealer headquartered in Olds, Alberta, Canada, will offer a wide variety of both new and used agricultural equipment to customers in western Canada. Founded in 2009 in Nobleford, Canada, Noble Equipment began as the first KRONE hay and forage technology dealer in western Canada. Today, Noble Equipment offers a variety of agricultural equipment for dairy, livestock, poultry, hay and forage farmers as well as a dedicated service and support department. “We are thrilled to expand business in the Central Alberta agriculture market by providing JCB’s top-notch, durable equipment,” said Ryan Vandenberg, Shareholder Service Manager of Noble JCB. “It is our mission to provide outstanding equipment, service and parts and combining our dedicated

service with JCB’s worldfamous equipment will help us fulfil that mission for our loyal customers.” Noble JCB’s full-time technicians are red seal certified for all service, maintenance and repair needs. In addition to providing services for their full line of equipment, the company offers in-field repairs to ensure prompt service and minimal customer down time. “Noble Equipment is known for their dedication to exceptional customer service as well as a focus on JCB’s Fastracs, making them a great partner for us,” said Dan Schmidt, vice president of Agriculture at JCB. ”We are looking forward to helping them grow and increase equipment availability for the western Canada market.” b Source: JCB

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Peterbilt’s Smartlinq In Production: A New Convenient Mobile App Peterbilt’s (NASDAQ as PCAR) innovative SmartLINQ technology – a factory-installed, fully integrated remote diagnostics system standard on all trucks equipped with a PACCAR MX-13 engine – is now in production and providing customers with even greater uptime and fleet management convenience. Introduced in March, the SmartLINQ remote diagnostics system provides customers with real-time,

at-a-glance fleet health to maximize uptime, keep deliveries on schedule and manage service events. “SmartLINQ gives customers the tools they need for greater profitability, efficiency and productivity,” said Robert Woodall, Peterbilt Assistant General Manager of Sales and Marketing. “Our extensive pilot testing of this time and money saving technology proves SmartLINQ provides customers

with greater uptime and a new level of vehicle supervision and management. In addition, we are enhancing customer convenience with an exclusive new smartphone and tablet SmartLINQ app for both Android and iOS platforms.” The SmartLINQ app is a free download through the Apple iTunes store and the Android storefront. It is available now for Apple mobile devices and later this month for Android devices. Woodall added that trucks equipped with SmartLINQ, which includes a complimentary two-year subscription to the service, are fully supported by Peterbilt dealers. The new, exclusive Peterbilt mobile app gives fleet managers and truck owners full access to the SmartLINQ portal, providing one-touch access to fleet health and the tools to schedule maintenance throughout Peterbilt’s North American

dealer network. With SmartLINQ, customers can choose to have the system communicate with Peterbilt dealerships should a vehicle need quick attention. The dealership can be notified of the vehicle’s arrival, and have a service bay, technician and parts at the ready. “SmartLINQ strengthens the connection between our customers and dealers,” said Woodall. “Remote diagnostics technology provides customers with maximum uptime.” About Peterbilt Peterbilt Motors Company, located in Denton, Texas, has a global reputation for superior quality, industry leading design, innovative engineering and fuel efficient solutions, and is recognized as the “Class” of the industry. Peterbilt provides a comprehensive array of aftermarket support programs through its 300-plus North American dealer locations that complement its full lineup of on-highway, vocational and medium duty products, including alternative fuel vehicles. Peterbilt offers industry leading service and support, including preventive maintenance plans, expedited Rapid Check diag-

nostic services, automated parts inventory replenishment and 24/7 complimentary Customer Assistance through 1-800-4-Peterbilt.

Page 73

For more information about Peterbilt, visit www.peterbilt.com. b Source: Peterbilt

UNMATCHED EXCELLENCE SINCE 1944 WE UNDERSTAND YOUR TRANSPORTATION REQUIREMENTS

BUILT IN CANADA , MADE FOR CANADIANS

  

EXPERIENCE AND KNOWLEDGE OF FORESTRY & HEAVY HAUL YOU CAN DEPEND ON ! IN STOCK TRAILERS - CALL FOR DETAILS FULL LINE OF PARTS AVAILABLE

TOLL FREE: 866-657-2662 www.peerless.ca | info@peerless.ca

Supply Post Western Canada Edition · supplypost.com

September 2015

orlaco

Page 74

Stoneridge, (NYSE:SRI), a leading supplier of driver information systems to the global, commercial vehicle, truck, bus and automotive markets and Orlaco Products BV, a leading supplier of vehicle camera solutions have executed a strategic alliance agreement to develop, manufacture and sell electronic mirror replacement systems. The MirrorEye mirror replacement system, combines Orlaco camera technology and Stoneridge driver information technology (dis-

play, electronics & system integration) into an innovative, industry leading product to enhance safety and fuel economy. Under the agreement, the two companies will design, develop and produce mirror replacement systems targeted initially at the commercial vehicle and off road transportation markets. Stoneridge will act as Tier 1 and be responsible for the overall system and vehicle interior products and Orlaco will be re-

sponsible for the vehicle exterior products. These systems will comply with ISO 16506:2015 Camera Monitor Systems. “Our companies have enjoyed an excellent working relationship that gives us all confidence in our collective ability to deliver an innovative solution to the market,” said Mr. Henrie G. van Beusekom, Chief Executive Officer of Orlaco. “This strategic alliance is an effective method to introduce our patented

technology with an industry leader to provide the market with an integrated solution that leverages our combined strengths”. “The true strength of this new technology platform is that we are spectacularly improving mirror functionality by providing night-vision, automatic safety panning function during truck-turns and possibility of video-recording for analysis and security.” “This strategic alliance agreement brings together

Keyera To Acquire 50% Ownership Interest In A Portion Of Grand Rapids Diluent Pipeline Keyera Corp. (TSX:KEY) (“Keyera”) announced that it has agreed to acquire a 50% interest in the southernmost portion of the 20inch diluent Grand Rapids Pipeline (the “Pipeline”). The 45-kilometre (28 mile) pipeline will be constructed by Grand Rapids Pipeline Limited Partnership (“Grand Rapids”), an affiliate of TransCanada PipeLines

Limited (“TransCanada”) and Brion Energy Corporation. The Pipeline will extend from Keyera’s Edmonton Terminal (“KET”) to TransCanada’s Heartland Terminal near Fort Saskatchewan as part of TransCanada’s previously announced Grand Rapids Pipeline project. In connection with this agreement, Keyera will be constructing a pump station at KET where the Pipeline

will connect. Under a 50-50 joint venture agreement, once the Pipeline has been completed Grand Rapids will contribute it to the joint venture and Keyera will contribute the new pump station at KET. Based on current estimates, Keyera expects its total contribution to the joint venture will be approximately $140 million. Keyera will be operator of the Pipeline and

the KET pump station once construction is complete and the assets are in service. The expected in-service date is in the second half of 2017, assuming the current schedule is maintained. Based on the current design, the Pipeline is expected to provide Keyera with proprietary access to at least 225,000 net barrels per day of additional diluent transportation capac-

orlaco

Stoneridge And Orlaco Sign Strategic Alliance Agreement For Mirror Replacement Systems To Enhance Vehicle Safety a global leader in the instrumentation and electronics markets and a premier cameras supplier,” said Jon DeGaynor, Chief Executive Officer of Stoneridge, Inc. “The MirrorEye mirror replacement system has received high praise in driver trials under a variety of driving conditions. MirrorEye increases the driver’s field of view, enhances night visibility and improves safe operating conditions for drivers and fleet owners. In addition

to the compelling safety benefits, the small exterior design of this system compared to traditional mirrors improves fuel economy by enhanced aerodynamics. Road testing indicates significant reduction in fuel consumption. This best-inclass mirror replacement solution reaffirms our companies’ continuing commitment to deliver innovation and value to customers worldwide.” b

ity between Edmonton and Fort Saskatchewan. A portion of this capacity will be used to meet Keyera’s commitments under existing agreements with customers for diluent transportation, which total at least 485,000 barrels per day by 2019. The remaining capacity will be available for new diluent transportation business. Keyera also plans to add connectivity between its existing Fort Saskatchewan Condensate System and the Pipeline. Based on preliminary engineering, the connection costs are expected to range between $40 million and $60 million. “As bitumen production continues to increase, so does demand for our industry-leading diluent handling services at the Edmonton/Fort Saskatch-

ewan hub”, said David Smith, Keyera’s President and Chief Executive Officer. “We currently provide customers with the most complete diluent network in the industry, offering access to the most receipt and delivery connections, as well as storage options. This Pipeline further enhances our diluent handling services by adding another connection point, increasing our pipeline capacity and improving the flexibility and reliability of our system. Keyera values the opportunity to enter into this joint venture with Grand Rapids, which is yet another strong industry partnership providing critical infrastructure for oil sands producers.” b

Source: Orlaco

Source: Keyera Corp.

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 75

bba pumps

September 2015

The New BA100K – Introducing The World’s Best Performing 4" Dewatering Pump Set! BBA Pumps proudly announces the launch of the new BA100K - a diesel driven 4” solids handling pump — the world’s best in class mobile pump set. This new BA100K is a product born from the BBA company philosophy for the lowest cost of ownership and the desire to protect the environment. The unit guarantees the best pumping performance combined with the lowest cost of mainte-

nance and minimal exhaust emissions. Best pumping performance: With a capacity of over 190 m3/hour (836 US GPM) and a maximum head of 22 mwc (73 ft.), this compact, dry self-priming dewatering and sewage pump is now the clear market leader. This is not just due to the large free passage of 82 mm (3.23”); the unit is driven by a single-

Eriez Flotation Division Event Places Spotlight On State-Of-Art Technologies On June 25, 2015 the Eriez Flotation Division (EFD) brought some of the top Vancouver engineering companies together to discuss the companies’ leading edge capabilities in a technology open house, according to Ken Roberts, EFD Director – Sales North America. “This technology meeting will be the first in a series of gatherings across Canada and North America,” said Roberts. “The attendees represent many of the leading design and construction engineering companies and owner/op-

cylinder diesel engine with a calculated maximum fuel consumption of 1.75 litre/ hour. Lowest maintenance cost: Thanks to DriveOn technology the service interval for the new BA100K has now increased from 500 operational hours normal for standard engines to an impressive 1500 hours. Changing oil and replacing filters has also become much easier.

to interface with industry leaders as we develop new technologies to serve the minerals processing, mining and other industries where flotation is important.” In addition to the various educational opportunities, EFD also used the open house as a way to provide matching dollar support to the Mining for Miracles campaign (www. miningformiracles.org) for contributions received from all sources during the day of the open house. Mining for Miracles is a partnership between the BC Mineral Exploration and Mining Industry and the BC Children’s Hospital Foundation. b

erators in the Vancouver area.” The EFD program included these demonstrations or presentations: • Mini Pilot Plant • Skid-mounted Columns • CrossFlow Separator • Column Flotation • HydroFloat • Spraying Technologies • RSP Slurry Splitter • Engineering/Design Capabilities “Whenever we meet with this calibre of engineers, we learn as much as we share with them,” Roberts continued. “We work very hard to seek ways Source: Jennie Ford

Most important features of the DriveOn: • Service interval of 1500 operational hours • 65% less maintenance to the diesel engine • 25% savings in engine oil • Ideal physical working conditions during maintenance Lowest exhaust emissions: The RF system, an exhaust module developed

by BBA provides the capability to equip the pump with an optional soot filter/ catalytic module. Despite the already minimal emissions of the single-cylinder diesel engine, this option reduces the exhaust emission to virtually zero. This gives more flexibility to the end user, allowing the new BA100K pump to be used in more locations, even in towns and city centres with the strictest environmental rules. Other “best in class” features: • The most durable sound attenuated canopy, with a hot-dip galvanized steel frame and composite doors and panels.

• The BA100K pumps up to 110 m3 per litre of fuel. • The unit is multifunctional; it can be used in a wide range of projects from dewatering to sewer bypass pumping. • Manufacturer’s standard 4 year warranty. b Source: BBA Pumps

You spend long hours on the road, the last thing you want to do is spend more hours on an audit. In the last 3 years, 33% of the transportation industry was audited by the CRA. You could lose up to 62 hours minimum complying with a CRA audit. We specialize in the transportation sector and, with over 60 years in business, we know truckers and we know truck taxes. All our Members receive audit protection along with year round service. Contact us today at 1.800.265.1002 and find out how we can help make your life less taxing. Want record keeping services as well? Sign up online at promo.easyrecordbooks.com/transport/ or call 1.888.908.8915 for more details!

www.fbc.ca/truck-tax-specialists

PHOTO ADS

Book your ad online at: www.supplypost.com/truckpost 1-800-663-4802 Our Readers Are Your Buyers

FIND MORE TRUCKS ON-LINE AT

WWW.TRUCKPOST.CA

PAGE 76 · SEPTEMBER 2015 2014 DODGE 5500 ST 4X4 SERVICE TRUCK

6.7 Cummins, 6 spd auto, remote start, coolant heater. Ventures service body w/4400 Cobra, Oxy/Act cabinet, 3000 watt invertor, JD welderator. Clean, serviced, recent CVIP, ready to work. Owner driven. Currently registered in AB. Financing avail. w/0% down OAC. $91,900.

BULL DOG DIESEL 780-715-8422

2013 PETERBILT 388

WWW.TRUCKPOST.CA NEW 2015 C500 PICKER

Cummins ISX 525 Hp, Weldco 45T Crane. RED DEER OIL SHOW SPECIAL: $696,000 Plus Taxes And Fees.

GREATWEST KENWORTH LTD. CALGARY

403-253-7555 or Toll Free: 888-253-7555 (2) 2011 KENWORTH T700 MX13

550 ISX. Over 300,000 km of warranty left on it. 423,000 km, $140,000. Also have a 2009 Doepker trailer 32 & 28. Selling both.

430 hp, UltraShift, AG 400L, 3.70 Ratio, 235" WB, 75" ACAD. 13.3K# FA, 40K# RA, approx. 800,000 kms. Fleet maintained. Stk # BJ94883XX.

CALL BILL

CUSTOM TRUCKS KENWORTH

604-819-6111

1-844-830-6217 2013 CT660L TRIDEM

1995 KENWORTH T800B WIDE NOSE

M11 Cummins engine. Great on fuel. 15 speed. 40 Rears. Ex-Bison Truck. Very clean and fresh MVI. $18,500. Delta, BC.

N14 15 speed trans 46 rears. Digital onboard scales. Wet kit, fresh MVI. Ready for work! $18,000. Delta, BC.

JIM GALBRAITH TRUCKING

604-657-1121 · craigyw@telus.net (5) 2011/2012 WESTERN STAR 4900FA DAY CABS

604-657-1121 · craigyw@telus.net 2016 CT681 PLOW TRUCK

Coming soon – (5) 2011/2012 Western Star 4900FA Day Cabs, DDEC 15, 530 hp, 18 spd, 4 way locks, 12K# or 13.2K# FA, 46K# RA. Well maintained fleet units. 2 have wet kits installed. *Photo is a representation*. Finance available OAC. Stk # CPBXXX.

430 hp, Caterpillar CX-31, automatic transmission, 20K front, 46K rears.

1-844-830-6217

Cell: 778-872-1466

CUSTOM TRUCKS KENWORTH

MIKE DeSMET - FINNING

2016 CT660S

CT-15, 550 hp, 1,850 lb/ft torque, Eaton 18 spd, double frame, Neway ADZ fully locking Merritor axles, 20K frt axle, 125,000 kms.

475 hp, CT-13 CX-31, auto, 254" WB, 46 rears, 46,000 Primaxx Air suspension, 20K front axle, double frame, perfect roll off truck.

MIKE DeSMET - FINNING

Cell: 778-872-1466

1997 KENWORTH T800

Cell: 778-872-1466

On Newsstands Everywhere! BOOK YOUR AD TODAY CALL

1-800-663-4802

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 77

The PT-300 is the most reliable, and at 3.25 PSI, one of the lowest ground pressure mulchers that PrimeTech has built.

Front Page Story

primetecH

Edged, Primed and Mulchin’ primetecH

Roger Osmond Tree Services Clears The Competition With PrimeTech Mulchers by Ronald Mullins

Land and vegetation clearing business is not seasonal and this first demo took place in typical northern Alberta winter weather. Sub zero temperatures and snowing and blowing… and just as expected, the PT-300 performed flawlessly.

e’ve all heard the expression, “When the going gets tough, the tough get going” but few have experienced it like Roger Osmond. It was 1983, times were difficult and job or career opportunities few and far between in his native Newfoundland. There was not much happening in forestry or fishing, so like many young men be-

fore him, he heeded the siren sound… go west young man. Landing in Edmonton, with little money but lots of drive and ambition, Roger spent the first few days in his new-found-land calling a park bench home. This was certainly not a very prestigious address… even in the best parts of town. But determined not

to fail, he kept showing up at various company offices every morning until finally someone said… “You must really want to work” and gave him his first job trimming trees and brush in Lamont, Alberta. He continued with this company for the next several years, finally ending up in in Northern Alberta where this company had con-

tracts with Alberta Power. Moving On But the company he had been working with opted for something new… and this new direction did not include Roger. But by now he had been bitten by the opportunity and beauty of northern Alberta and had recently moved his family into a small farm house in Nampa. Roger also loved

what he had been doing and knew that trees never stopped growing. After all he had several years experience as an arborist and tree trimmer and he was not about to move back to the park bench in Edmonton. Thus, his next move was to purchase a used truck designed for tree trimming from a company in Quebec. He flew to Montreal and drove it back to his ‘new’ Alberta home… and Roger Osmond Tree Services Ltd. had been born. As with many ‘new’ businesses, things were not easy. In the early going there were any number of successes and failures. But that same dogged determination that had brought him west a decade earlier and got him up off that park bench, was still burning in his soul. For Roger, failure was not an option. In time he secured several contracts including one with ATCO Electric, the electric utilities provider for much of Alberta. ATCO have thousands of kilometres of electricity transmission lines… all of which need clearing and vegetation control. “They are our biggest and best customer,” states Roger “And we need trustworthy crews and most importantly, reliable equip-

ment to service them in the right way”. Experience has shown that one of the key pieces of heavy-equipment necessary to effectively control trees and vegetation under or near electrical transmission lines is a dependable, purpose-built tracked-carrier mulcher. These many thousands of kilometres of electricity transmission lines often run along public roads, sports fields, public and private property, mountains and muskeg. Often just getting to the job site is a challenge. Reputation Recalled Over the years, while managing or working on tree and vegetation control sites, Roger had experience with almost every brand of mulcher manufactured. He understood the difference between the good, the bad and the ugly. So when he contacted Riccardo Cammata, General Manager of PrimeTech (Canada) and Dave Burns, Sales Manager for Edge Equipment in Edmonton (www.edgeequip ment.com) he knew what he needed. He needed the good… he had no time for the bad and the ugly. Edge Equipment is the Alberta-based dealer group for PrimeTech, a brand of FAE Group (www.primetech.com). Italian-based Continued on page 78

Page 78

Supply Post Western Canada Edition · supplypost.com

US Bill Could Be First Step to Lowering Truck Driver Age Limit A Senate bill would instruct the Federal Motor Carrier Safety Administration to conduct a pilot study of lowering the age at which Class A CDL holders can drive trucks across state lines in the U.S. The Commercial Driver Act (S.1672), introduced by Sen. Deb Fischer (RNE) and co-sponsored by Sen. Jon Tester (D-MT), would allow contiguous states to enter into compacts to standardize the licensing requirements for drivers— including those under age 21– to operate commercial motor vehicles in interstate commerce, reports Heavy

Duty Trucking. Not mentioned in the bill is the concept of graduated CDL licensing, which calls for allowing 18- to 20-year olds to work as apprentice drivers to gain on-the-road experience leading to becoming fully licenced at age 21. Presumably, states that would take part in any standardization pilots enabled by the legislation might consider studying the apprenticeship model. The American Trucking Associations favors that approach to help draw in younger recruits for driving jobs. According to Dave Osiecki, ATA

executive vice president and chief of national advocacy, age-graduated licenses are “not a new concept for passenger car drivers” and that it’s “important to conduct research on this to attract people to this industry.” ATA said it supports the Act because it helps address the growing shortage of commercial truck drivers. “As our population grows and our freight demands increase, we are going to need more drivers,” said Bill graves, ATA president & CEO. “The Commercial Driver Act helps solve two problems by ex- Source: OTA

International ProStar Diamond Renewed Used Truck Is A ‘Dream Come True’ For Arkansas Trucker International Used Truck Organization Presents Diamond Renewed International ProStar as Part of Mid-America Trucking Show Promotion International Truck today announced James Wright as the recipient of the Diamond Renewed Used Truck Giveaway promoted during this year’s Mid-America Trucking Show. The promotion drove traffic to the International Used Truck booth and increased awareness of Diamond Renewed, the industry’s most comprehensive certified used truck program. “We are raising the bar with our Diamond Renewed certified used truck program by providing our used truck customers with

a new truck experience,” said Mike McMahon, vice president of International’s Used Truck Organization. “And, we couldn’t be happier to provide James Wright with this experience.” Wright received his 2012 International ProStar tractor at the company’s Nashville Used Truck Centre. The International ProStar is equipped with a MaxxForce 13 engine and a 9-speed manual Eaton Fuller transmission. “Receiving this truck is a dream come true, a thrill of a lifetime for my family and me,” said James Wright, Diamond Renewed ProStar recipient and driver for Knight Transportation. “My wife and I were looking to purchase a truck

We believe this review will enhance public confidence by ensuring that the regulatory requirements are complete, industry knowledge about and compliance with regulations is high, and enforcement is effective,” says Louise Yako, BCTA President & CEO. Based on ICBC data, since 2007, the collision rate

cleaning or replacing diesel particulate filters (DPF) and diesel oxidation catalysts (DOC), exhaust gas recirculation (EGR) calibration software updates, checking and repairing brake systems, conducting major body repair, painting the frame rail and more. Vehicles also come standard with the industry leading System1 confidence warranty, in addition to the OnCommand Connection remote diagnostics system, and Repair Advocate. Diamond Renewed trucks are available at any of the 15 International Used Truck Centres nationwide and the International Truck dealer network. For more information on the Diamond Renewed program, and to find the nearest Diamond Renewed truck near you visit www.internationalusedtrucks.com. b

in the next several years, drive for a while and then retire. Now, with this ProStar, we can accelerate the timing of our goal.” Wright recently turned in his company truck and leased his new, Diamond Renewed ProStar to Knight Transportation, effectively making him an owner-operator. He currently lives in eastern Arkansas with his wife, Katrina and son, Billy. The Diamond Renewed program puts used International trucks through the industry’s most comprehensive inspection and mechanical reconditioning process. Technicians review more than 180 checkpoints and conduct mechanical and aesthetic reconditioning including Source: Navistar

Motor Coach Safety Review Right Move To Assure Public The British Columbia Trucking Association and its motor coach members are looking forward to participating in the Ministry of Transportation and Infrastructure’s motor coach industry safety review. “Public confidence in the safe operation of motor coaches is critical to the motor coach industry.

panding the pool of eligible drivers and creating employment opportunities for younger Americans.” Graves also remarked that, “it is illogical that a 20-year-old can drive the 500 miles from San Francisco to San Diego, but (currently) not the eight miles from Memphis, Tennessee to West Memphis, Arkansas … Even more illogical is that a 20-yearold may not drive a truck in any state if the cargo in it originated outside the state or will eventually leave the state by some other means.” The bill states that the act would not change “the authority to operate in Interstate Commerce for drivers over the age of 21, including by setting the minimum age requirement to receive a Class A commercial driver’s licence at 18 years of age.” b

even higher rate of 29%. BCTA offers information to tour companies, school groups, and others who charter motor coaches about identifying safe motor coach companies, understanding the regulations that govern motor coach driver hours of work and how to plan trips to comply with drivers’ regulated hours of work. b

for all buses in BC steadily decreased from 23 collisions per 100 licensed buses in 2007 to 18 collisions per 100 licensed buses in 2013. This represents a reduction of approximately 22%. During that same time period, the collision rate for public, airport and charter buses – the subject of the Ministry safety review – decreased by an Source: BCTA

September 2015 Continued from page 77

FAE Group, has been a global specialist in the design, manufacture and distribution of professional mulching, heavy-duty land clearing and road construction equipment since 1989. PrimeTech’s Canadian base is strategically placed in Spruce Grove, Alberta. Within hours Dave Burns, accompanied by PrimeTech’s CEO Andreas Lambacher, loaded up a PrimeTech PT-300 purposebuilt tracked mulcher and headed out to meet Roger on a northern Alberta job site. Now the land and vegetation clearing business is not seasonal and this first demo took place in typical northern Alberta winter weather. Sub zero temperatures and snowing and blowing… and just as expected, the PT-300 performed flawlessly. Roger was impressed. But as often happens, this particular contract was winding down and Roger was not going to have sufficient work for a machine of this style and capabilities in the short term. As soon as business picked up, Roger was quickly on the phone to Riccardo and Dave stating that “It’s time to purchase a mulcher, what do you have available? I need two on an ATCO job site in High Level, Alberta right away.” As it so happened, and because PrimeTech’s Canadian base of operations is in nearby Spruce Grove, Riccardo along with the team at Edge Equipment were able to very quickly fulfill Roger’s order. On a day when it was minus 34 Celsius on the job site, Roger took delivery of two Prime Tech PT-300 machines. The efficiency of these machines impressed not only Roger but his operators and his clients as well. But the pressure was on to move this contract along and exactly one week after this first delivery Roger called Dave again and ordered a third machine. Roger would now have three PrimeTech PT-300 units in operation. Job site production was up and most importantly his clients were very pleased. The Technical Stuff The PT-300 is Prime Tech’s most popular unit and is powered by a John Deere 6068HF485 6.8 litre, 275 hp diesel engine. It comes with Sauer Danfoss hydraulics, a hydrostatic track and heads transmission and a hydraulic

cooling system. The D4 oscillating undercarriage is available in two track options, the LGP 800 mm double grouser or STD 600 mm single grouser configurations. The company claims that the PT-300 is the most reliable, and at 3.25 PSI, one of the lowest ground pressure mulchers that the company has built. In addition to the PT-300 model, PrimeTech also manufactures two larger units. The latest addition to the PrimeTech mulcher line and with over 400 hp, the powerful and productive PT-475 and the 600 hp, Cummins powered PT-600. There is a smaller brother in the group as well, the 160 hp Cummins powered PrimeTech PT-175. Full Circle Which brings us full circle back to Roger Osmond. Everyone on Roger’s team, including his accountant, as well as his clients, were extremely pleased with the performance of the Prime Tech units. Funny… but things like above-average production and belowaverage fuel and maintenance costs always seem to make accountants happy. Now the company needed a smaller unit that could easily be transported by truck and trailer and get into those more difficult locations or work smaller job sites. So Dave and Riccardo got another call and were able to deliver a brand new Prime Tech PT-175 to Roger. “We are extremely pleased with our Prime Tech units as well as the service we get from Edge Equipment,” states Roger. “These are tough machines. Our operators love the cabin comforts and our clients are extremely pleased with the performance and production that we are able to deliver.” There is no question Roger Osmond Tree Services have an edge on the competition and are primed for mulching. Roger Osmond Tree Services Ltd. is based in Peace River, Alberta and services customers throughout Alberta, Saskatchewan and British Columbia. Edge Equipment is based in Edmonton and PrimeTech (Canada) in nearby Spruce Grove, Alberta. b Ronald Mullins is a Kelowna, B.C. based writer/photographer and is a regular contributor to Supply Post.

September 2015

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Doosan To Expand North American Headquarters Doosan has broken ground on a $9.5 million North American headquarters expansion in West Fargo, North Dakota. Company officials say the expansion to the existing facility will help accommodate growth, drive innovation and improve operations, which are all key to maintaining global leadership. “This is an exciting time at Doosan, as we continue to grow in North Dakota,” said Rich Goldsbury, president of Bobcat Company and Doosan North America. “This investment is about maintaining our leadership position in the compact equipment industry, driving more heavy equipment business growth, and creating an environment where innovation and forward thinking will generate the next best ideas.” The current headquarters — built in 2000 — houses individuals within several departments of business administration, as well as product development and

attract and retain talented team members focused on helping to move our company forward,” Goldsbury said. “The building will offer state-of-the art facilities for collaboration and independent working, similar to what we have done at the Acceleration Centre in Bismarck.” The $28 million Acceleration Centre project last year involved expansion of an existing building in Bismarck to include office and lab space, classrooms and demonstration areas, and both indoor and outdoor machine operating areas. The Acceleration Centre has been lauded for its innovative workspaces and technology. The expanded headquarters building will see many of the same features, and it will be a continued model for how all Doosan facilities will function. “This is an on-going investment and process,” Goldsbury said. “We will continue to make enhancements that help us maintain our leadership in the industry. Our people and products are second to none; we want our facilities to be the same. b

marketing communications for Doosan. The expansion will double square footage and employee capacity, and Doosan will pursue LEED certification for the facility in both design and construction. Last year, Doosan opened the exciting new Acceleration Centre in Bismarck, N.D., a facility focused on engineering, R&D, training and product testing. Other North Dakota Doosan facilities have undergone renovations over the last two years. The expansion is slated for completion in late summer 2016. The West Fargo expansion will enable Doosan to bring together employees currently working at different locations in the Fargo area. The expansion also fits with company’s commitment to fields related to STEM (science, technology, engineering and math), which has been a major initiative for Doosan, the state of North Dakota and the region. “We plan to create an environment that helps us Source: Doosan

Page 79

Alberta Exports To Bounce Back From Energy Losses In 2016 The dramatic drop in oil and gas prices will lead to a 17 per cent fall in Alberta’s export earnings in 2015, but partial price recovery and volume gains will help overall exports rebound in 2016 to the tune of 19 percent growth. The forecast was made May 20, by Export Development Canada (EDC), Canada’s leading provider of small business financing and insurance for companies with sales or business outside of Canada. “This will be a difficult year for Alberta exports, but there is light at the end of the tunnel,” said Peter Hall, chief economist, EDC. Economy, driven by U.S. growth, and the anticipated rise in oil prices back to the $70-per-barrel level will fuel the expected turnaround next year,” added Hall. The forecast predicts a 25 percent drop in energy exports and a 23 percent drop in natural gas exports this year, which is signifi-

with energy.” “Alberta will always be about oil and gas, but it helps to develop strength in other sectors that can fill in when commodity prices are down.” EDC’s semi-annual Global Export Forecast addresses the latest global export conditions including market- and sector-specific insights to help Canadian exporting companies grow their international sales. It also analyzes a range of risks for which exporters should be prepared. b

cant for an economy that depends on energy for nearly 75 percent of its export revenue. However, the energy sector is expected to bounce back with 27 percent growth in 2016, while natural gas will stage a significant yet less dramatic comeback with 9 percent growth in 2016 due largely in part to increased shale Source: AED gas capacity in the U.S. Outside of energy, the export story is positive for Alberta. Exports from sectors like agriculture, machinery and equipment, and chemicals and plastics will collectively see 7 percent growth in 2015, followed by 3 percent growth in 2016. “Energy receives all the headlines but it’s great to see positive growth in other sectors,” said Hall. “Diversification is an important insulator, one that can protect an economy against seismic shifts in any one sector of the economy, like we’re seeing right now

253-863-7646

NOBODY BEATS OUR QUALITY! NOBODY!

Dennis: 253-606-1748 dennisscroggins@comcast.net Ken: 253-405-0854 kenwilliamspsts@comcast.net

PUGET SOUND TRUCK SALES 4X4

1999 Freightliner FL80, 4x4, Crew Cab, Cummins, auto, retarder, 2 spd T/C, 549 gal tank, fire system with foam.

BIG POWER

ROCK SHOOTER

2007 Mack Granite Rock Shooter, remote drive, 460HP, 10 spd, Heavy Specs, tarp, LOW MILES.

6X6

2005 Western Star 4900, Cat C15 - 550HP, jakes, 13 spd, Heavy Spec, air ride cabe & susp., wet kit, very low miles, EX-GOVT UNIT.

2000 International S2574, 6x6, N14 - 460 HP, 10 spd, Heavy Spec, lockers, walking beams, winch, EX-GOVT UNIT.

6 X 6 WATER TRUCKS

FUEL TRUCKS

Water Trucks, (1) 4,000 gal Water Truck, (2) 3,300 95 LTL9000, 88 WCM64 and (2) 2,000 gallon units coming in. CALL.

Fuel Trucks, 2000 International 4900, w/5K Gal, 1999 Int’l 4900 w/2K Gal, ’91 Int’l 4700 w/2K Gallon, and Others. CALL FOR DETAILS.

4X4

1998 Ford L9000, 4x4 with 20' flatbed dump, 8.3L - 275HP, 9 spd, locker, A/C, Ex-Govt truck with LOW MILES!

PLOW/SANDER

2001 Freightliner FLD112SD, ISM ISM-370, Auto retarder, Heavy Specs, Heated 15’ box, SNOW PLOW AND COMBO SANDER included.

WINCH

6X6

2000 Freightliner FL112, 6x6, ISM-370HP, Jakes, auto, Heavy Specs, Lockers, 2 spd T/C, step frame, 10 yard dump, LOW MILES.

DUMP TRUCKS!

2001 Freightliner FLD120, ISM400, auto, Heavy Specs, 70K# winch, Cozad ramps, Ex-City Truck! LOW MILES.

SERVICE TRUCKS

2000 Freightliner FL60, ISB - 190HP, auto, 26K# GVWR, service body with 5K# crane, welder, torch cabinet.

5 Yard Dumps, (2) 4X4’s, (3) Peterbilts w/ auto trans, (2) Heavy Spec big power units, (2) Cabover automatics. CALL.

www.pugetsoundtrucks.com

Page 80

Supply Post Western Canada Edition · supplypost.com

September 2015

DIDN‘T FIND WHAT YOU NEED? These 3 machines were online only this week!

SupplyPost.com is optimized for quick load times on tablets and mobile phones!

Find THOUSANDS of listings online at www.supplypost.com