WWW.TRUCKPOST.CA
YOUR TRUCK & TRAILER CONNECTION, SINCE 1971
FEBRUARY 2014
TRUCKPOST TRUCK Publications Mail Agreement #40070144
More Truck Photo A14ds PAGE T-
2009 VOLVO 780
2013 FREIGHTLINER M2-106
2007 PETERBILT 355
Stk # 491291A - 2009 Volvo 780, Cummins ISX 500HP, 13 spd, 13,200 front, 40,00O rears 3.58, 11R22.5. $45,900
14,458kms, EXT cab, Cummins engine, Allison transmission, custom bumper, grille, exhaust, rims and fuel tanks powder coated to match, customized 20 ft endura painted steel deck and rear out-riggers. Located in Edmonton.
2007 Pete 335, 330 Cat, 10 Spd, Compressor, Grease Pumps, 1000 Us Gallon Diesel Tank, Oil, Anti Freeze, Tanks, Misc. Product Tanks, Loaded Fuel & Lube Truck, 92K Miles $98,500
PACIFIC COAST HEAVY TRUCK GROUP
FIRST TRUCK CENTRE
INTERNATIONAL MACHINERY
604-888-5577
1.888.882.8530
1-888-480-9401
2014 INTERNATIONAL WORKSTAR SBA 6X4
2000 INTERNATIONAL 2574
2014 INT’L WORKSTAR SBA 6 X 4, N13 SCR 475 HP, 18 SPD, 20/46k Axles, ALum Wheels, redesigned Slope Nose, 16’ 6” Langfab light steel dump, pony ready w/pintle, LOADED, WORK READY.
2000 International 2574, 4-axle dump, Cummins N14/430 hp Allison auto, PS, AC, AM-FM, CC, Jakek, 18K FA, 40K rears, 12K lift, 16’ dump, pup equipped, just painted, excounty truck.
2011 Ford 550 Auto Transmission, TAM5 Hooklift, Only 24,000 Kms! Truck & hook. $55,000.
HARBOUR INTERNATIONAL TRUCKS
PUGET SOUND TRUCK SALES
PM INDUSTRIES
604-888-2888
253-863-7646
2011 FORD 550
1-855-656-1689
QUALITY TRAILERS LTD. PUTTING QUALITY FIRST! 888-426-4018
50 Roy Roche Drive, Winnipeg, Manitoba
www.qualitytrailersltd.com
Page T-2
Your Truck & Trailer Connection, Since 1971
February 2013
204-632-5300
PUTTING QUALITY FIRST!
QUALITY TRAILERS LTD. Mac Tridem & Tandem Half Rounds Aluminum Wheels, Michels Tarp With Or Without Lift Axle
Mac Tandem Flat Deck Sliding Front axle, Aluminum Wheels, 2 boxes, O/O light package. BWS 53’ Tridem Equipment Trailer, 22.5 Rubber, Front And Rear Deck Ramps, Wide Load Lights, Strobe Lights.
Mac Tandem End Dump 2014 Mac Tandem End Dump, Full Liner Aluminum Wheels, Michel’s Electric Tarp
Mac Tandem Drop Deck – 2014 Mac Tandem Drop Deck Aluminum Wheels, Sliding Front Axle, Sliding Winches, 2 Boxes, 2 Load Levelers, Strobe Lights, Wide Load Lights
2011 Reitenouer 48’ Tandem Flat Deck Aluminum Wheels, Sliding Front Axle, 2 big boxes, Dunage Rack, mint condition.
Mac Tridem Drop Deck 2014 New Mac Tridem Dropdeck Aluminum Wheels, Sliding Winches, 2 Boxes, 2 Load Levelers, Strobe Lights, Wide Load Lights
Mac Super B - 2014 Mac Aluminum Super B With Or Without Liquid Fertilizer Tanks. Priced To Move!
Mac Pneumatic Tank New In Stock! Mac Tridem Pneumatic Tank. Lift Axles, Aluminum Wheels, 4’ Plumbing, Aluminum Handrail On Top. Hendrickson 250 Suspension
2006 Trailmobile Tridem Heater Van, Thermo King Heater, Low Hours, very clean trailers, 2 to choose from.
Mac Tridem Smooth Side End Dump , Aluminum Wheels, with or without Lift Axles, Full Box liner, Electric Tarp, 6 in Stock.
BWS Air Assisted Detach both 48’ Tandem and 53’ Tandem, Aluminum Wheels, Wide Load Lights, Strobe Lights
Lode King Tandem Flatbed Combo 2007 & 2008 Lode King Tandem Flatbed Combo Front Slider, Alum Wheels, Boxes, Dunage Rack, 4 To Choose From.
50 Roy Roche Drive, Winnipeg, Manitoba
www.qualitytrailersltd.com
Stoughton In Stock New Stoughton Plate Van
BWS 53’ Scissorneck, 10’ Wide, Rear Strobe Lights, Oilfeild Special
February 2013
Your Truck & Trailer Connection, Since 1971
Air Dryer Systems: Troubleshooting And Maintenance With commercial vehicle technology advancing and expanding the use of air for non-braking functions, the experts at Bendix Commercial Vehicle Systems LLC stress the importance of protecting air systems from contamination to ensure longevity and performance. As part of its Bendix Tech Tips series, Bendix offers preventive maintenance and troubleshooting insight on air dryer systems and some of their key components. “Systems that can be impacted by excessive oil or moist air – from the air brakes to the engine, emission, and drivetrain systems – are susceptible to failure when that air is contaminated,” said Rick Conklin, Bendix Product Line Director, Air Treatment. “These systems often include technologies that improve productivity and fuel economy, or that are required to meet emissions regulations. Protecting them is important to keep vehicles on the road, increase their service cycles,
and reduce maintenance costs.” An overall air dryer system check should begin with opening the drain valves on the reservoirs to check for moisture in the system. If moisture is present, verify that no external air has been applied to the system, and check the air dryer’s service data sheet to confirm that the air dryer is mounted in the correct location with the correct discharge line length. If external air was applied, drain all reservoirs and purge tanks, restart the vehicle, and allow system pressure to build to the governor cutout pressure. Verify that the proper system pressure has been reached, then operate the vehicle normally. Recheck for water in the reservoirs after one week. If an issue with the air dryer mounting or plumbing is encountered, have it corrected, and ensure that the discharge line from the compressor to the air dryer
slopes continuously downward to the air dryer inlet, with no water traps. Also remember to take into account any significant temperature changes within the previous 24 hours. Ambient temperature shifts of greater than 30 degrees Fahrenheit can cause a temporary accumulation of moisture. If a significant temperature change occurred, continue to operate the vehicle under normal conditions. The small amount of water that may have condensed due to the temperature shift will be reabsorbed by the dry air once the vehicle is in operation. Check the air system again after one week. Whether moisture is present in the system or not, check all the air lines for damage such as chafing, and examine the air dryer mounting bolts for tightness and torque as specified in the manufacturer’s service data sheet. Within the air dryer system, there are three key
Page T-3
components to monitor: the air dryer cartridge, the purge valve, and the delivery check valve. Air Dryer Cartridge Maintenance – Easy as 1-2-3 Depending on vocation, Bendix recommends a one-, two-, or three-year air dryer cartridge replacement on vehicles equipped with a Bendix compressor. • One year or 100,000 miles: Severe service applications such as residential refuse trucks or school buses; • Two years or 200,000
miles: Pickup and delivery operations; doubleand tripletrailer line haul trucks; • Three years or 300,000 miles: Line haul operations using a single trailer. Recommended intervals for trucks equipped with non-Bendix compressors are six months (50,000 miles), one year (100,000 miles), and two years (200,000 miles), respectively. More frequent intervals may be required depending on a vehicle’s age, compressor condition, and op-
1 Solution
2
Continued on page T-4
• Commercial Automobile • Fleet • Cargo
“Quality Insurance for Quality Clients”
• Truckmans’ Liability
Ivan Jonsson, C.H.R.P. (780) 707-6004 ivan.j@awinins.ca
ENVIRO TECH REFRIGERATION LTD. Problem
erating environment. For better air dryer performance and increased system protection, Bendix recommends using an oilcoalescing cartridge like the Bendix PuraGuard. Oil can be particularly harmful to air systems, deteriorating seals – which can cause leaks – and contributing to premature damage in a variety of other components such as push-pull dash valves, spring brake modulating valves, and brake chamber diaphragms. Standard cartridges
Most shops will tell you that it is easier and more economical to replace the heater rather than repairing it. For this reason, heaters are deemed disposable...until now!
Webasto & Espar parking heaters repaired from $375!
REPAI R FROM ED $375 !
OUR SERVICE INCLUDES
• A full PC diagnostics of your heater • Decarboning your combustion chamber (replace burner if needed or replace atomizer pad) • Sand blast your heat exchanger • Replace or clean the glow pin • Reassemble the heater with all new gaskets • Adjust air fuel mixture calibration to reduce carbon build up. (This offer applies to Webasto Airtop heaters 2-5 KW, Espar airtronic 2-5 KW, Webasto TL17 hydronic or Espar Hydronic 4-5 KW models only.)
Webasto and Espar recommend that their heaters be serviced and decarboned annually to keep them running trouble free.
WE BUY BROKEN HEATERS. PLEASE CONTACT US FOR MORE INFORMATION.
Results!
3
PH-778-228-8855 Email: enviro-tech@shaw.ca
5-12240 Horseshoe Way Richmond, B.C. V7A 4X9 Fraction of the Price from OEM!
Page T-4
Your Truck & Trailer Connection, Since 1971
Continued from page T-3
may be replaced with oil-coalescing cartridges, but fleets should always change out oil-coalescing cartridges with like replacements. Additionally, fleets need to beware of low-cost and counterfeit cartridges, which are not as effective as OEM equipment. Purge Valve Issues and Replacement As a best practice in preventive maintenance, Bendix recommends replacing the purge valve assembly whenever the air dryer cartridge is replaced. This will address several potential purge valve issues, including: • Air leakage or lack of pressure building due to purge valve seal wear;
• •Popping” of the purge valve due to intermittent sticking; • Loss of engine turbocharger boost during the purge cycle due to leakage in the turbo cutoff valve. Delivery Check Valve Issues and Replacement Signs that the system’s delivery check valve is in need of replacement include a lack of pressure buildup due to the valve sticking in the closed position, and rapid cycling or loss of pressure during the purge cycle caused by a leaky valve. Bendix recommends replacing the air dryer system’s delivery check valve with every other cartridge replacement.
TRUCK POST ADVERTISERS INDEX A-Win Insurance .......................... T-3
Pacific Coast Truck ...................... T-7
Alquip Diesel ............................. T-15
PM Industries .............................. T-9
Cool-It Truck Parts ..................... T-10 Del Equipment ............................ T-6 Enviro-Tech ................................. T-3
Premium Truck ............................ T-6 Prolenc ....................................... T-4
First Truck ................................... T-8
Puget Sound Truck .................... T-16
First Vancouver Finance ............... T-7
Quality Trailer ....................... T-1, T-2
Fort Garry .................................... T-5
Querel Trailer ............................... T-1
Glover International Truck ............ T-9 Harbour Truck ............................ T-11 International Machinery ............. T-13
Right Truck .................................. T-5 Specialized Trailer ..................... T-12
K-Line ....................................... T-15
Summit Trailer ........................... T-11
New West Truck ......................... T-12
Truck Photo Ads ........................ T-14
NEXT DEADLINE: Friday, February 14, 2014
TRUCKPOST For advertising information & rates, please contact us at sales@truckpost.ca or Phone: 604-607-5577 or Toll Free: 1-800-663-4802 www.truckpost.ca #105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5
www.truckpost.ca
Truck Post is a part of The Supply Post Newspaper Published Monthly - Printed in Canada Publications Mail Agreement No. 40070144 Reproduction of any material including photographs and/or advertisements in whole or in part is forbidden.
“Keeping an air system operating properly is critical — but it doesn’t have to be complicated,” Conklin said. “By understanding the system’s key components, installing oilcoalescing air dryer cartridges, and following a regular maintenance schedule, fleets can keep their vehicles on the road, operating safely and generating revenue.” Bendix provides commercial fleets, technicians, and drivers with the tools they need to ensure safe operation through assessment, maintenance, and repair. The Bendix On-Line Brake School at www. brake-school.com provides access to the company’s knowledge database and technical resources on all aspects of electronics and air brake maintenance and product education. The Bendix Brake Training School, one of the industry’s longestrunning training programs, has educated more than 250,000 students since its founding more than 50 years ago. Among other tools, the company offers field-tested sales and service professionals; a 100 percent ASEcertified field technical support team; and the Bendix Tech Team (at 1-800-AIRBRAKE), an expert technical support group providing service advice, brake system troubleshooting, and product training. About the Bendix Tech Tips Series Bendix, the North American leader in the development and manufacture of leading-edge active safety and braking system technologies, is committed to helping keep commercial vehicles on the road and in good working condition. The Bendix Tech Tips series addresses common commercial vehicle maintenance questions and issues concerning the total range of components found within foundation and air brake systems, as well as advanced safety systems. b
February 2013
The Perfect Way to Finance a Trucking Company By Tom Klausen Financing a business can be a complicated affair but if you are in the transportation business it’s more straightforward. On one hand you have large pieces of equipment which you can lease and on the other you have bills of lading which you can factor. In between you take care of the variable expenses with cashflow and build working capital through supplier credit and retained earnings. Of course it’s not that simple; competition is fierce, fuel is expensive, good drivers are hard to find and any number of things can go wrong in a given day. New companies appear and disappear with regularity and those who fail to adapt simply leave quickly. It’s a challenging and constantly changing industry. Banks long ago figured out that the industry was high risk if they followed their normal lending practices. Today if a company in the transportation industry does not have a healthy balance sheet with plenty of collateral a bank will not even consider taking an application. On an ongoing basis they closely scrutinize and carefully monitor all their transportation clients. As a result, today you will find entire industries of specialized finance companies that do nothing but focus on the transportation industry. These lenders are industry experienced and they understand the risks. They also need to charge more to cover the higher maintenance and risks involved and because in most cases their funds
come from a bank. Factoring has been a common source of working capital finance for many years. It doesn’t have the same negative connotation in the transportation industry than it might have in other industries. Some feel like it’s a last resort but for those who know something about business finance, Factoring is simply the perfect way for a smaller, newer or growing transport company to finance itself. Applying for a Factoring relationship is a fairly straightforward process. Paperwork must be in good order, taxes must be up to date and ownership must be capable and committed. The completeness of the information is more important to a Factor than the details. It usually takes only a couple of weeks to go through the whole process. Because Factoring is so common in the transportation industry the issue of customer notification is not a big one when it’s done right. Customers who complain or refuse factored invoices are usually the same ones who pay their invoice poorly. It simply makes sense for a growing, busy company with minimal full time staff to outsource the management of their Accounts Receivable. A Factor is far more flexible in dealing with the challenges that will invari-
ably happen as a business goes through its growing pains. A proper factoring relationship is one where both parties succeed if the business succeeds. Factoring services also reduce risk and save the company both time and money. What could be better than a “non-equity partnership” where both parties contribute? Good communication is the most vital ingredient of a successful factoring relationship. A typical one will last somewhere between 6 and 24 months. Take the time to find a Factor who also takes the time to get to know you. Beware of the ones who offer you a quick and easy application process without commitments or a contract. Remember that you are choosing a financial partner who is in direct contact with your customers. You only want to work with a Factor who takes the time to understand your needs, walks you through the application process, outlines the process and provides a Proposal that includes everything. What could be more straightforward than that? b Tom Klausen is a Senior VP with First Vancouver Finance (www.FVF.ca) which provides full service factoring to small businesses across Canada. He has been involved in the factoring industry for over 20 years and has a Bachelor of Commerce from the University of British Columbia. He also consults with lenders and businesses throughout the US. If you would like to reach out to Tom for any reason he can be reached directly at 604-988-1490 or TKlausen@fvf.ca
TRUCKPOST Your Truck & Trailer Connection, Since 1971
MAXIMIZE PAYLOAD! 8’6” bunks highway - 83 metres payload Lightweight Swedish Steel Innovative Designs
Timber Bunks
Inwood Trucking Quesnel, BC
Call 877.563.8899 or 250.563.8899 www.prolenc.com Prince George, BC
February 2013
Your Truck & Trailer Connection, Since 1971
Page T-5
www.righttrucks.com 10847 Scott Road, Surrey, BC V3V 4G8
Right Trucks Sales & Service Ltd. $22,800
$16,800
$26,800
20246-102nd Ave, Langley, BC
604-888-5522 / 1-800-663-4115 #12-096 | 2005 Isuzu
G.V.W.: 12,000 LBS, BODY: MORGAN VAN BODY, ENGINE HP: ISUZU TURBO INTERCOOLED DIESEL Exhaust Brake-A/CCruise-Pwr Doors/Windows-CD Player-3 Person Cab-Tilt/Telescope Steering WheelRoof Vent-2 Rows of E Track-Translucent Roof.
$29,800
#13-099 | 2005 Chev W5500 G.V.W.: 17,950 LBS., BODY: HACKNEY BEVERAGE BOX ENGINE HP: 4 CYL TURBO DIESEL, 6 sides doors, 4-52” 2- 30”, A/C, CD Player, Dual passenger seat, exhaust brake, P.W., P Locks, Tilt wheel.
$26,800
#13-140 | 2006 International G.V.W.:25,500, BODY: VAN ENGINE HP: DT466 210 HP, Air conditioning, cruise control, aluminum walk ramp, aluminum fuel tank.
$19,800
WE HAVE MOVED TO A NEW LOCATION! 20246 - 102nd Ave, Langley, BC New Equipment Arriving Daily!
# 12-230 | 2007 HINO 185 MODEL, 4 Cyl Turbo Diesel , 5 Spd Std Trans, Hydraulic Brakes, Wrecker Body With Wheel Lift And Dolly Wheels.
$32,800
#13-139 | 2005 Isuzu 14’ Reefer G.V.W.:14,500, BODY: VAN, ENGINE HP: 5.2 L TURBO DIESEL 4 CYLINDER,Step in side door, air conditioning, power windows, power locks, Carrier Diesel Reefer - 2000 hours with electric standby.
$34,800
#13-158 | 2005 GMC W5500 4 CYCL TURBO DIESEL, Automatic Trans, Hydraulic Brakes, 12’ Van Body With Tuckaway Power Tail Gate.
SUPER B FLATDECKS
• Steel or Alum. Wheels • Lift Axles
OFFERS
2013 TRIDEM PONY PUP # 13-131 | 2009 INTERNATIONAL 4300, DT466 DIESEL, Allison Automatic Trans, Aluminum Wheels, Dual Fuel Tanks, 24’ Vanbody W/Aluminum Tuckaway Power Tailgate.
$24,800
#C12-236 | 2007 HINO 268 G.V.W.: 29,000 LBS, BODY: REEFER VAN, ENGINE HP: HINO J08E-TA 220 HP 2007 Hino 268 with 24’ Reefer Van Body & 3000 Lbs Interlift Power Tailgate.
$17,800
# 13-152 | 2003 INTERNATIONAL 4400 MODEL, DT466 Diesel, Allison Automatic Trans, 33,000Lb GVW, Air Brakes. 236” WB, Will Sell With Or Without Van Body.
• Air Tarp • 24.5 Tires • Air Ride
$7,800
2012 TANDEM PONY PUPS #13-124 | 2007 INTERNATIONAL 4300 G.V.W.: BODY: FLAT DECK, ENGINE HP: DT 466, 210 HP, Allison Automatic Trans, 24’ Flat Deck, Hydraulic Brakes, 195,000 miles, 11R 22.5 tires, spring suspension, BC Safety Certified and fully serviced.
$42,800
#13-090 | 2006 GMC W4500 G.V.W.: 14,500 LBS., BODY: VAN ENGINE HP: 4 CYLINDER TURBO DIESEL, with 16’ Aluminum Van Body and 3000 lb. Large Platform Power Tailgate.
$7,800
#13-132 | 2008 HINO 338 MODEL, 260HP DIESEL. Allison Automatic Trans, Air Ride Suspension, 24’ Van Body, Thermo King Diesel Reefer, Aluminum Power Tailgate.
$27,500
#13-104 | 26’ VAN BODY X 8 1/2 wide x 8 1/2 high, roll up rear door, side door, oak floor, 3000 lb. tuckaway power tailgate - NEW WHITE PAINT - can install on any make or model.
$44,500
#13-073 | 16’ MORGAN VAN BODY 90.5” wide (inside dimensions) x 90.5” High (inside Dimensions) with 2000 lb. Tuckaway Maxon Power Tailgate. Hardwood Floor, Roll up Rear Door, Translucent Roof, New White Paint , 2 Rows of E Track.
$29,800
• Air tarp • 24.5 tires • Regular or Highlift • In Stock 53' ALUMINUM COMBO "MAXI"
• 22.5 Aluminum w/Michelin XZE2 • Fully Loaded
#13-144 | 2008 HINO 268 24’ VAN G.V.W.: 29,000 LBS GVW, BODY: MORGAN ALUMINUM VAN BODY, ENGINE HP: 6 CYL TURBO DIESEL 220 HP, A/C, Hydraulic Brakes, Tilt Wheel, Cruise Control, CD Player, Dual Pass seat, Adjustable Driver Seat, Rear Step Bumper, 2 Rows of Tie Downs.
EQUIPMENT TRAILER
• 53' Traveling Tridem • 6.5° Load Angle • Powder Coat Paint
$39,800
QUAD AXLE WAGONS #13-080 | 2009 Ford E350 Bus! ENGINE HP: POWER STROKE DIESEL Automatic transmission, hydraulic brakes, 47,000 original miles, front and rear a/c, large screen TV. BC Safety Certified and fully serviced. Ready to work.
#13-051 | 2007 HINO 338 G.V.W.: 33,000 LB. BODY: JONES TILT DECK, ENGINE HP: 260 HP 6 CYL DIESEL. 25’ Jones tilt deck with winch and 3’ Hydraulic Ramp. CD Player, Air conditioning, heated mirrors, cruise control, air side driver seat, tilt wheel, air horn, power windows, dual passenger seat.
#13-122 | 2010 Peterbilt 24’ Van G.V.W.: 26,000 LB, BODY: VAN BODY ENGINE HP: CUMMINS PX6 240 HP INLINE 6 CYLINDER, Model 330, 6 spd standard transmission Hydraulic Brakes 11r22.5 Tires 24’ x 102” x 102” aluminum, 2 rows of e-track, plywood lined Roll up rear door, Hard wood floor Tuck away power tailgate.
Financing Available OAC • Warranty Available on Some Models
1-866-404-4466 • 604-584-9555
• AR200 or Hardox
STEVE VANYSSELDYK / PETER STRAKER
604-888-5522 / 1-800-663-4115
Page T-6
Your Truck & Trailer Connection, Since 1971
From Oil Patch To Over-The-Road, B&R Eckel’s Succeeds With Diverse Fleet Of Kenworth Trucks “Walter” is its name, and it’s a behemoth of a truck. A 1978 Kenworth 953 — a six-wheel drive conventional capable of hauling loads in excess of 160,000 pounds. It’s a truck with more than 2 million miles under the hood; a truck that still moves oil rigs over the most treacherous off-road terrain the folks at B&R
Eckel’s Transport can throw its way. “And it symbolizes why we run Kenworths,” said Darren Smith, Fleet Manager for the Bonnyville, Albertabased trucking company. “Kenworths are tough. They’re durable, and at the end of their cycle with us, they can command a high resale value
in excess of 20 percent more than a comparably spec’d truck.” Arguably one of the most diverse trucking businesses in Canada, B&R Eckel’s is a privately held company that was founded in 1965 by Victor Ringuette, who still heads the company nearly 50 years later. Today, 55 percent of its loads are des-
SWENSON PV SANDERS HAVE ARRIVED!
Swenson PV 8ft carbon steel sanders with Briggs & Stratton Engine drive with wireless remote control are here! Get yours whilesupplies last – Sale price (uninstalled, no battery) $3,650 EACH
DEL EQUIPMENT
Call 604-941-6241 or e-mail cdowall@delequipment.com
tined for oil fields, while 45 percent are general freight. It operates 360 Class 6-8 tractors and has more than 1,100 pieces of additional equipment – including lowboys, flat decks, reefers and dry vans, and specialized oilfield hauling equipment. Kenworth Vocational Trucks For the oil patch, mostly in Alberta and Saskatchewan, the company utilizes a mix of big and ultra-big tractors. The majority is Kenworth equipment including the C500. Many of the C500s are configured with 40,000-lb tandem steer axles. Others feature tri-drive axles, powered by 550 hp engines, driven through 18-speed transmissions. “The C500 is our staple heavy rig mover, and it joins Walter in moving the biggest loads,” said Smith. “They’re flatbed units with dual winches to haul aboard the oil rig drilling platforms. To support those trucks we run a lot of Kenworth T800s and use them as picker trucks, or as winch tractors. “Going forward, we’ve seen the new Kenworth T880s, and we’re fired up
February 2013 about putting those into our operation as well,” said Smith. “It has the same bloodline as the T800, so we know it’s a tough truck that can be spec’d the way we want it. The comfort of that truck is really something. The reaction from our first driver of that rig was, ‘wow, this is like driving a big car. It doesn’t feel like a truck at all.’ ” Kenworth Over-The-Road Trucks For the over-the-road fleet, Smith said the company has possible plans to standardize with the new Kenworth T680, which have been in operation as day cabs for the company in regional operations. The Kenworth T680 day cab is already proving itself in regional operations. “In initial comments from our frontline operators we are extremely happy with the new model,” Smith said. “The T680 day cab is equipped with a PACCAR MX13 engine, rated at 500 horsepower, and our drivers are saying the engine pulls well — and has better overall power as compared to some of the other engines we run.”
B&R Eckel’s was also the first in Canada to take delivery of the new Kenworth T680 52-inch sleeper. “We’re using that model for longer haul runs and anticipate it may become our flagship truck,” said Smith. “But, the proof will be in the pudding – we capture all the data in life cycle costs from maintenance to fuel economy to resale value. But we visualize that this truck could be our truck of choice. Everyone builds a good truck, but that being said, Kenworth seems to fit the bill for us in every way. The visibility, the comfort, the quietness of the truck is unmatched.” For its over–the-road fleet, B&R Eckel’s has a trade cycle of 4.5 to 5.0 years, or 700,000 to 750,000 kilometers. “One of the biggest keys in measuring life cycle costs of equipment is resale value,” said Smith. “And what we’ve seen with Kenworth, and what I’ve always known being involved in the industry for over 27 years, is that Kenworth commands a premium. We often get in excess of a 20 percent preContinued on page T-7
GENERAL INQUIRIES Business: 250-769-7255 Toll Free: 1-888-878-2511 Email: sales@premiumtruck.ca
www.kelownafreightliner.com Stock # KS349 - 2009 Silver/Black International 9900i with 51” Sleeper, 559,447 kms, Cummins ISX engine with 565 HP, 18 Speed Trans, 12,000 lb Front axle, 46,000 lb Rear axle, 3.91 ratio.
Stock # KN757 - 2014 Freightliner Coronado, DD16 Detroit Engine at 600 HP, 18 Speed Eaton Trans, 13,300 lb Front Axle, 46,000 lb rear axle, 3.91 Gear Ratio, 244” wheelbase.
Stock #KS358 - 2010 Freightliner Cascadia with 60" XT Sleeper, DD15 Detroit Engine at 560 HP, 18 Spd Transmission, 12,000 lb Front Axle, 46,000 lb Rear Axle, 224" Wheelbase, 738,264 kms.
Stock # KN649 - New 2012 Fuso FG140 4x4 with a landscaper package, Mitsubishi engine at 160 HP, Auto trans, 135” wheelbase, tool box and gravel box.
Stock # KN772 Cummins ISB Engine at 250 HP, 2500RDS Allison Trans, 12,000 lb Front Axle, 21,000 lb rear axle (on order).
Stock # KN666 – New 2014 Doepker Tandem B Logger, Black colour, 11R24.5 Tires, Sliding King pin, LED lights.
PLEASE CALL FOR PRICING INFORMATION
Stock # KN788 – 2014 Freightliner M2-106 with service body, 4 x 2, ISL Cummins engine at 350 HP, 3000RDS Allison Transmission, 14,700 lb Front axle, 23,000 lb Rear axle, 215” Wheelbase, Extended cab. Stock # KN685 & KN686 – New 2014 Doepker Super B Flat Deck, Lift axles on one of the trailers, Black in colour, 2 tool boxes, 22.5 tires, LED lights.
Stock # KS342 - 2009 Freightliner FLD 120 SD Day Cab, Detroit S60 engine with 515 HP, Auto Trans, 12,000 lb Front Axle, 52,000 lb Rear axle, lift axle, 220” Wheelbase.
February 2013
Your Truck & Trailer Connection, Since 1971
BCTA Announces New International Trucking Reference For Motor Carriers Hiring Immigrant Drivers The BC Trucking Association (BCTA) recently released the International Trucking Reference: Roads, Rules, and Drivers, a guide to the truck driving environment in 10 countries to help motor carriers understand how the skills and experience of an immigrant driver might translate to a professional career in BC. BCTA developed the International Trucking Reference with input from motor carriers about the type of information they need to make hiring decisions about job candidates who have gained the bulk of their commercial driving experience outside Canada. Included are pointers on the reasons for recruiting drivers from the immigrant labour pool, tips for finding and recruiting immigrant candidates, and considerations for successfully interviewing candidates from another culture. The Reference is a human resources tool for industry employers facing a huge driver shortage, which the Conference
Board of Canada has projected will see up to 33,000 empty seats by 2020. As one of two BCTA projects made possible by the Immigrant Employment Council of BC (IEC-BC) and funded by the Government of Canada and the Province of BC, the International Trucking Reference will help address immigrant talent hiring and retention challenges faced by BC employers. “Given that most BC trucking companies are small to mid-sized, they may not have the staff to research the background of a job applicant with foreign experience. BCTA is pleased that funding from the federal and provincial governments has allowed us to create the International Trucking Reference, a dependable, easy-touse resource that will save employers time and help them make better-informed hiring decisions,” said Louise Yako, BCTA President & CEO. The International Trucking Reference was authored by Ottawa-based
PARTS, SALES AND SERVICE
NEW AND USED. Stk # AL9377 2009 Freightliner Cascadia DD15, 475 HP, Auto, 40 rears, 3.73
Graybridge Malkalm, a training and consulting firm specializing in organizational diversity. BCTA carriers recommended a “top 10” list of countries to include in the guide: India, Ireland, Italy, Mexico, the Philippines, Poland, the Republic of Korea, Romania, Russia, the Ukraine and the United Kingdom. The Reference provides an accurate profile of the driving environment in each country, including a description of the terrain and climate, commercial vehicle types, typical driver responsibilities, licensing and training standards, infrastructure, and regulations, among others. “Immigrants who call BC home bring a wealth of talent to our province – talent that employers can tap into as long as they know how to recognize the skills and experience. BCTA’s project will help employers understand the working environments of qualified professional drivers who have immigrated from oth-
er countries, and give them confidence they are hiring people with the skills their companies – and our economy – need,” said Minister of Jobs, Tourism and Skills Training and Responsible for Labour, Shirley Bond. The International Trucking Reference complements BCTA’s IDRIVE – the Immigrant Driver Readiness – Industry Validation and Engagement project, which BCTA is piloting now. IDRIVE participants complete four tests, including a road test, to assess their experience and readiness for work in BC. With an immigrant candidate’s IDRIVE report in hand and details from the country profiles in the International Trucking Reference, BC employers can take on new drivers with greater confidence in their ability to operate on North American roads. The International Trucking Reference: Roads, Rules, and Drivers is available to industry employers on BCTA’s website at www. bctrucking.com/careers. More information about IDRIVE is also available on the landing page. The Asia Pacific Gateway Skills Table is managing both projects on BCTA’s behalf. b
Page T-7 Continued from page T-6
mium on the Kenworth equipment we sell over any other brand.” Kenworth Medium Duty Trucks For local deliveries, Smith said the company utilizes Kenworth T370s. “These are equipped with van bodies and are used for pickup and delivery,” he said. “They’re working beautifully.” Committed to Service According to Smith, B&R Eckel’s is putting more equipment to work. “In the past three years, we’ve grown 20 percent and expect that trend to continue,” he said. “Like most trucking companies, we’ve had our share of hard times, but we’re growing again and much of it has to do with our
company’s mantra that Victor and our employees live by: ‘Committed to Service.’ It’s something we truly believe in and we live and breathe that every day. It’s from the top all the way down and one reason I feel that our drivers and other employees stay with us. We have many drivers that have been with us for 20-plus years.” Smith said B&R Eckel’s not only delivers quality service, but looks for it as well. “We certainly do, and we’ve been very pleased with the dealer support we’ve been given through Edmonton Kenworth and Kenworth Lloydminster. We feel they’re second to none, and they help us keep our wheels turning.” b
Providing Factoring and A/R Financing to the BC Trucking Industry since 1988.
Contact Tom Klausen or Raj Singh at 800-663-0721
www.FVF.ca
The largest Volvo, Mack dealer in B.C. and have been recognized as Volvo’s Canadian Truck Dealer of the Year in 2005. Stk # 491291A 2009 Volvo 780, Cummins ISX 500HP, 13 spd, 13,200 front, 40,00O rears 3.58, 11R22.5
$45,900
Stk # W56034 2006 Freightliner Century Cat C15 435 HP, 13 Speed, 40 rears, 3.55
$24,900 Stk # W15883 2006 Freightliner Columbia, MBE 460, 13 speed, 40 rears, very clean truck
$49,000
Stk # 939849 2009 Kenworth T660, Cummins ISX 485 HP, 18 speed, 40 rears, 3.90, 960,000 kms
$59,000
$24,000
Stk # 378890A 2005 Volvo Daycab, Volvo D12 465 HP, 13 speed, 40 rears
Stk # 048239 2009 International 9200, Cat C13 470 HP, 13 speed, 40 rears 3.73, 450,000 kms
Stk # 294250A 2011 Volvo 670, Cummins ISX 500 HP, 13 spd, 12 front, 40 rears 3.58, 11R22.5
$28,000
$39,900
Stk # 457696 2007 International 9900i, Cummins ISX 475 HP, Autoshift, 40 rears, 741,250 miles
Stk # 104126 2009 International Prostar, Cummins ISX 500 HP, 18 speed, 46 rears, 3.90, 735,000 kms
Stk # 465181A 2007 Volvo 670, Volvo D12 465 HP, 13 speed, 40 rears, 3.73, 1 million kms
$52,500
$33,900
$33,900 Stk #AR1755 2010 Western Star, Great B-Train truck, Detroit DD15 500HP, 12 front 46,000lb rears, 758,205 kms
$63,900 clean unit!
$69,900
Stk # 270781A 2009 Volvo 670, Volvo 500hp, I-Shift, 40 rears 3.36
Stk # AB6345 2008 Freightliner Cascadia, Detroit Ser60 515 HP, Autoshift, 40 rears, 995,200 kms
$58,000
$43,000
18964 - 96th Ave, Surrey, BC | Call: (604) 888-5577 | www.pchtg.ca
Page T-8
Your Truck & Trailer Connection, Since 1971
Daimler Recognized For Outstanding Environmental Efforts The North Carolina Department of Environment and Natural Resources (NCDENR) recently recognized the Daimler Trucks North America (DTNA) plant in Cleveland as an Environmental Steward. The award recognizes DTNA’s superior environmental performance, commitment to continued reduction of its environmental impact, and demonstrated commitment to exceed compliance. The facility joins only 16 other commercial facilities in the state to have achieved this recognition. “Daimler Trucks North America demonstrates what it means to be a successful business with a strong environmental ethic,” said John Skvarla, secretary of the N.C. Department of Environment and Natural Resources. “By achieving significant reductions in waste generation and energy usage, the North Carolina facility has shown that the demands of a growing business can
go hand-in-hand with environmental protection.” Using the company’s continuous improvement program, DTNA employee teams who are located at the plant identified the best options for reducing waste and recycling each material, whether reusing cartons for shipping, reclaiming solvent, working with supplier partners to reduce packaging, or turning waste into energy. “This achievement required a commitment by each and every one of the employees here,” said Freightliner Environmental Engineer Heather Callahan. “Everything received or produced by the company is used, reused, recycled, or sold, and nothing is sent to a landfill. Today, the facility joins an elite group of landfill-free manufacturing facilities in the United States and is one of five DTNA facilities to do so.” The title of Environmental Steward is the highest honor of NCDENR’s Environmental Stewardship
www.firsttruck.ca #3AKJGND11EDFT8622
2014 FREIGHTLINER CORONADO SD, 5,562kms, 244” wheelbase, 122” 48” MR cab, Detroit engine, Meritor transmission, Taperleaf front suspension, Airliner rear suspension. Located in Edmonton.
Initiative (ESI) based on a decision by its 10-member advisory board which recommended the recognition of the Daimler Trucks North America’s Cleveland Truck Plant. Advisory board membership consists of individuals from industry, trade groups, environmental and citizen nongovernmental organizations, government, academia and small business. Reasons cited by the advisory board in its recognition of the facility include: • Its compliance history and commitment to continual improvement including a mature ISO 14001 environmental management system that has been certified by a third party since 2004; • The facility’s commitment to continue to reduce waste by setting, and achieving a zero waste-to-landfill goal; • The facility’s elimination of hazardous wastewater sludge due to material substitution; and • The facility’s commit-
Vancouver: 1.888.882.8530 18688-96 Avenue, Surrey, BC
#1FVHG3DV1DHFA6081
#1FVHG3DV4EHFV9704
2014 FREIGHTLINER 114-SD, 4,002kms, 235” wheelbase, 114” cab, Detroit engine, Eaton Fuller RTLO-16918B transmission, Taperleaf front suspension, Airliner rear suspension. Located in Edmonton.
in High Point, N.C. was the first bus company to achieve the recognition, and in 2009, its Freightliner Custom Chassis Corporation plant in Gaffney, S.C. was the first chassis plant to achieve the status. This latest achievement by DTNA is one of many initiatives through which the company is demonstrating its commitment to sustainability. With sustainability as one of the company’s business priorities, its mission is to conserve resources, reduce all types of emissions, and promote economic growth while ensuring safe, efficient transportation options. DTNA environmental engineering representatives are scheduled to participate in the Zero Waste to Landfill conference, an off-shoot of the Carolina Recycling Association Conference to be held March 31 through April 3, 2014.. The Cleveland facility represents DTNA’s largest manufacturing plant in North America. There, the company produces Class 8 Freightliner trucks, including the Freightliner Cascadia. The facility was established in 1989.
Launched in 2002, the Environmental Stewardship Initiative is designed to promote and encourage superior environmental performance by North Carolina’s regulated community. It provides technical assistance and networking opportunities to stimulate the development and implementation of programs that use pollution prevention and innovative approaches to meet and go beyond regulatory requirements. This program seeks to reduce the impact on the environment beyond measures required by any permit or rule, producing a better environment, conserving natural resources and resulting in long-term economic benefits. The North Carolina Department of Environment and Natural Resources administers regulatory programs designed to protect air quality, water quality, and the public’s health. The organization also offers technical assistance to businesses, farmers, local governments, and the public and encourages responsible behavior with respect to the environment through education programs. b
Edmonton: 1.800.940.1940
Lloydminster: 1.800.661.3926
WEST: First Truck Centre Edmonton West, 11313-170St. SOUTH: First Truck Centre South Edmonton.5810-50 Street.
Box 11767, 6203-56 Street, Lloydminster.
#1FVHG3DV7DHBY8214
#1FVPGNDR0DDBY8184
#1FVACYBS9DDBW1526
2013 FREIGHTLINER 114 SD, 6,121kms, 248”
2013 FREIGHTLINER 114 SD, 4,234kms, 228”
2013 FREIGHTLINER CORONADO SD, 5,842kms,
2013 FREIGHTLINER M2-106, 14,458kms, EXT cab,
wheelbase, 114”FR cab, Detroit engine, Allison 4500 RDS transmission, Taperleaf front suspension, Hendrickson rear suspension. Located in Edmonton.
wheelbase, 114”FR cab, Detroit engine, Allison 4500 RDS transmission, Taperleaf front suspension, Airline rear suspension. Located in Edmonton.
300” wheelbase, 122” 48” MR cab, Detroit engine, Eaton Fuller transmission, Taperleaf front suspension, Airliner rear suspension. Located in Edmonton.
Cummins engine, Allison transmission, custom bumper, grille, exhaust, rims and fuel tanks powder coated to match, customized 20 ft endura painted steel deck and rear out-riggers. Located in Edmonton.
#3AKJGLD61ESFV0863
2014 FREIGHTLINER M2-106, 98kms, 200” wheelbase, 106” FR cab, Cummins engine, Allison 3500 RDS transmission, Taperleaf front suspension, Airliner rear suspension.
ment to energy conservation, with a 43% reduction over 2008 numbers. These gains are due to lighting changes, window replacements, and installing occupancy sensors, as well as the solar array on site. ”Daimler Trucks North America has an ongoing commitment to a holistic approach to achieving a sustainable future,” said Sandra Carter, environmental engineering manager, Daimler Trucks North America. “As a pioneer in environmental technologies and manufacturing processes, we reach beyond standard requirements whenever possible to lead the way for the industry.” The Zero-Waste-toLandfill goal was initiated to reduce the carbon footprint of manufacturing facilities under the DTNA umbrella. The Cleveland plant is one of five DTNA facilities to be recognized for achieving the ZeroWaste-to-Landfill status. Its parts plant in Gastonia, N.C. and its truck plant in Mt. Holly, N.C. also accomplished the achievement this year. In 2011, DTNA’s Thomas Built Buses plant
February 2013
2014 FREIGHTLINER CASCADIA FREIGHTLINER, 4,444kms, 228” wheelbase, 125” BBC Aluminum Conventional 72”RR cab, Detroit engine, Fuller Transmission, MT-40-14X 40000# R-Series Tandem rear axle. Located in Vancouver.
#3AKJGMD18EDFT5503
#1FVACYCY4EHFV4377
2014 FREIGHTLINER CORONADO SD 132, 637kms,
2014 FREIGHTLINER M2-106, 9kms, 252” wheelbase, 244” wheelbase, 132” 48” MR cab, Detroit engine, 132” EXT cab, Cummins engine, Allison 3500 RDS Eaton Fuller transmission, NXT-WT Hendrickson transmission, Taperleaf rear suspension, Airliner front Airtek 12500# front suspension, Airliner 46000# rear suspension. Located in Edmonton. suspension. Located in Loydminster. #1FURGNDR1DDBY8191 #1FVHGNDR1DDBY8067
2014 FREIGHTLINER M2-106, 264kms, 230” wheelbase, 106” cab, Cummins engine, Allison 3500 RDS trans, 12000# Dual Taperleaf front suspension, Airliner 21000# rear suspension.
2013 FREIGHTLINER CORONADO SD, 53kms, 244”
2013 FREIGHTLINER CORONADO SD, 5,557kms, 268” 2013 FREIGHTLINER CORONADO SD, 6,169kms, 228” 2013 FREIGHTLINER CORONADO SD, 6,063kms, 230”
wheelbase, 122” 48” MR, Detroit Engine, Eaton Fuller transmission, Taperleaf front suspension, Airliner rear suspension.
wheelbase, 122” BBC Aluminum Conventional cab, wheelbase, 122” 48” MR cab, Detroit engine, Eaton Fuller transmission, Taperleaf front suspension, Airliner Detroit engine, Fuller Transmission, Taperleaf front suspension, Taperleaf rear suspension. Located in rear suspension. Located in Edmonton. Vancouver.
wheelbase, 122” Coventional 58” MR XT cab, Detroit engine, Fuller RTLO-18918B transmission, Tandem rear axle.
February 2013
Your Truck & Trailer Connection, Since 1971 RED DEER
1-800-662-7186
1-403-845-4879
ROCKY MOUNTAIN HOUSE
CALGARY
AIRDRIE
CAMROSE
DRUMHELLER
1-403-948-2011 2009 4300 24' VAN BODY
2010 PROSTAR DAYCAB
$57,900
$67,500
MaxxDT Engine, 255 HP, Allison Auto Trans, F.A. 12,000, R.A. 21,000. #129724C
Maxx13 Engine, 475 HP, Fuller 18 Speed Trans, F.A. 12,000, R.A. 46,000. #206332
2010 PROSTAR 56" HI RISE
2011 INTERNATIONAL 5900
$89,900
$39,900
Page T-9
2006 FREIGHTLINER COLUMBIA
1-800-232-1947
2006 INTERNATIONAL 9400
1-888-723-6767 1-866-242-7232
2006 24’ THERMO KING BOX
$50,000
$29,900
Detroit Engine 435 HP, Auto, 10 Spd Ultrashift, F.A. 12,000, R.A. 40,000. #20774
Cat C15 Engine, 500 HP Fuller, 18 Speed Trans.F.A. 12,000 R.A. 46,000. #223290
2007 7500 BLENDING UNIT
2007 INTERNATIONAL 4300
$120,000
$7,450
#246224 VAN
2012 PROSTAR 73” HI RISE
$79,900
$27,500
Maxx13 Engine, 475 HP, Fuller 13 Spd Trans,F.A. 12,000 R.A. 40,000 #246664
Cummins ISX Engine, 525 HP, Fuller 18 Spd Trans, F.A. 14,600, R.A. 46,000. #286832
HT570 Engine, 330 HP, Fuller 10 Speed Trans F.A. 16,000 R.A. 40,000 #353945
DT466 Engine, 245 HP, Fuller 6 Speed Trans,F.A. 12,000 R.A. 21,000 #413216
Maxx13 Engine, 475 HP, Fuller 18 Speed Trans,F.A. 12,000 R.A. 46,000 #548155
2012 PROSTAR DAYCAB
2008 7500 40' FASSI CRANE
2012 PROSTAR 56" HI RISE
2010 INT’L TERRASTAR
2007 STERLING ACTERRA
$69,900
$95,000
Maxx13 Engine, 475 HP, Fuller 18 Spd Ultrashift F.A. 12,000 R.A. 40,000. #600215
Maxx10 Engine, 310 HP, Fuller 13 Speed Trans,F.A. 14,000 R.A. 40,000. #563684
$99,900
Maxx15 Engine, 500 HP, Fuller 18 Speed Trans, F.A. 13,200 R.A. 46,000 #595586
$53,000
$69,900
Maxx7 Engine, 300 HP, Allison Auto Trans. F.A. 7,000 R.A. 13,500. #629869
Cat C7 Engine, 300 HP, 8 Speed Transmission F.A 12,000 R.A 21,000. #64993
SEE OUR NEW & USED INVENTORY ONLINE AT WWW.GLOVER-ACE.COM Ray Shaw Account Manager ray@pmindustries.ca C: 250-713-1768
Mark Salmon Sales Manager marksalmon.pm@gmail.com C: 250-889-1529
Sidney, BC, 1946 Mills Road Office: 250-656-1689 | Fax: 250-656-1305
™
Trucks For Sale TRUCK & HOOK $55,000. BINS (2) $5,000 EA
1-855-656-1689
THIS NEW UNIT MUST MOVE!
Cranes For Sale
AUTHORIZED DISTRIBUTOR FOR GC POWER FORKLIFTS
• 1.5 to 10 Ton Capacity • Electric, Gas, Propane and Diesel • Nissan, Yanmar, Isuzu and Perkins Engines
PM 2.8, Max Lift 2,185 Lbs 2011 FORD 550 Auto Transmission, TAM5 Hooklift, Only 24,000 Kms!
NRC 20TB26 on PETERBILT 348
Cost Plus 10%. All remaining in stock spreaders and plows!
PM 3513LA, Max Lift 4,520 Lbs
$47,415
Best Prices on top quality units configured to meet your lifting requirements.
PM 35, Max Lift 33,070 Lbs
PM 21525 S, Max Lift 10,145 Lbs
Crane Rental Available - PM 35525 SP on Sterling Tri Drive with 22’ Deck.
SIDNEY SHOP - CRANE INSPECTION & REPAIR, DECK FABRICATION | 1-855-656-1689
Page T-10
Your Truck & Trailer Connection, Since 1971
Development Truck Restoration It’s taken nearly a year to transform the weathered development truck that was parked in a courtyard for years into a pristine show truck. The restoration of D001, the first development truck between Cummins and Chrysler, was revealed at the TDR Rally this past June. D001 was part of the initial fleet of six vehicles that were built to test the viability of a Cummins in-line 6-cylinder diesel engine in a Dodge Ram pickup. The name D001 originates from the 1980s, when Cummins identified test trucks by the letter D, for “Development”, and a three-digit number – 001, in this case. The process to restore D001 started under the hood, with a mechanical 12-valve 5.9-liter Cummins Turbo Diesel with a Bosch VE rotary pump. When the Cummins restoration team first met, the truck hadn’t been start-
ed in over five years. Of course, after that amount of time, the battery was dead. A new battery was installed, and with a tank of 5-year-old diesel fuel, the truck fired on command – true to form for a Gen 1. They fire almost instantaneously, and have an idle sound like no other diesel engine in the industry. The original rating for the truck was 160 hp and 400 lb-ft – less than half of the MY2013.5 high-output 385 hp and 850 lb-ft rating. After listening to the truck run and eventually driving it, the decision was made to not touch the internals of the engine. New accessories were installed: a starter, alternator, pulleys and belts. To restore the body and interior, countless hours were spent breaking the truck down to the frame, which was then sandblasted, primed and painted. From there, the suspension and rear-end
went in. Next came the steering components, and then the engine and transmission were dropped into the frame. While that work was under way, the cab and bed were being restored to mint condition. As the project progressed, the cab was placed on the completed chassis, and the dash, heating and cooling components were hooked up. The interior was completely restored – all-new carpet, seats and headliner were installed. Next, the repainted front fenders, hood, grille, bed and bumpers were bolted on. Finally, all the glass and trim pieces were added. It sounds simple enough, but if you’ve restored a vehicle, then you know how many hours are spent on the details. Cummins and Chrysler can be very proud of the care that went into the restoration and the respect given to this important artifact. This truck was the genesis of the Cummins-Ram partnership that has sold over 2 million Cummins Turbo Diesels and counting. b
February 2013
Ferrari Chooses Michelin Pilot Sport Cup 2 Tires On Its 458 Speciale The simultaneous codevelopment of the tire and car, using both simulated and track tests, led to very high levels of performance in three specific areas that were identified prior to the start of the project: faster dry lap times, consistent performance lap after lap and optimal grip on wet roads. In short, the Michelin Pilot Sport Cup 2 tire is an integral part of the new Ferrari 458 Speciale and a key component in giving it its exceptional performance. The tread compound Produced with the same tools used to manufacture race tires, the tread compound of the Michelin Pilot Sport Cup 2 tire integrates Bi-Compound technology. The outer rubber has been specially designed to deliver outstanding dry grip on curves, especially in tight corners, while the inner part of the tread uses rubber made with a more rigid elastomer to ensure
precise steering. An aramid fibre belt The main feature of the belt made with aramid, a high-density fibre, is its heightened tensile strength. This composite is both light and highly resistant; in fact, it is five times stronger than steel at an equivalent weight. The tire’s footprint remains constant as centrifugal growth of the tire is effectively controlled, even at very high speeds. The Track Variable Contact Patch 3.0 This innovation optimizes pressure in the tire’s contact patch so that a constant and optimum amount of rubber is always in contact with the track, thereby ensuring superior grip in both long and fast, and tight corners. A new bead area The bead area is 10 per cent wider than that of a traditional sports tire. It is strengthened with a high modulus rubber compound that increases the tire’s lateral stiffness and
LARGEST RADIATOR & CHARGE AIR COOLER INVENTORY IN CANADA
delivers sporty responsiveness as well as precise steering. Velvet sidewalls for clearer markings The Michelin Velvet Technology creates contrast on certain sections of the outer sidewall using micro-geometry techniques that absorb light. The geometry of the texture thus generated allows technicians to vary the contrast and create shades of black that have the look of velvet and make the sidewall markings much more visible. The very high performance levels of the new Michelin Pilot Sport Cup 2 tire are made possible due to the considerable resources that Michelin invests in its research and development activities – around c600 million per year. This means that the Group’s products do not only perform in one or two specific areas, but in all areas and this is what is known as Michelin Total Performance’. Tire sizes for the new Ferrari 458 Speciale: Michelin Pilot Sport Cup 2; 245/35 ZR 20 91 Y front 305/30 ZR 20 103 Y rear. b
RADIATORS CHARGE AIR COOLERS AIR CONDITIONING PARTS AIR CONDITIONING TOOLS GRILLS & HEADLIGHTS
INTERNATIONAL PRO-STAR 2008+ Grill with Bug Screen GRLIN102............................. $549.99* 0E# 3612816C93
FREIGHTLINER CASCADIA / COLUMBIA 2008+ Reservoir Tank RTFR102.......................... $449.99* 0E# A05-25263-005
* While quantities last.
HEATERS AND FANS EGR COOLERS TURBOS
Tel: 604-888-1883 Fax: 604-608-4846 #4-20085-100A Ave, Langley, BC
Toll Free: 1-877-COOLITO (266-5480)
www.cool-ittruckparts.com
February 2013
Your Truck & Trailer Connection, Since 1971
21010 108 AVE, EDMONTON, AB
1160 COMMERCIAL WAY, PENTICT0N, BC
1-888-447-4488
1-887-492-5445
Arne’s specializes in trailers for the gravel industry and has become a name to be trusted. Arne’s also has a rich history in the specialized lowbeds for oilfield, construction and equipment hauling.
Brandon dump bodies are top quality Canadian built gravel boxes offering full hardox construction rock boxes to ecomomy silage and gravel boxes.
Page T-11
19880 96TH Ave, Langley BC • 604-888-2888
TRUCKS FOR SALE BATE
0 RE $5,00
$36,995
CALL
Stk #: 201-941C
Stk #: 5900-17
2010 INT’L CF600 200 HP, AUTO, 149” WB, 19,500 GVW, 16’ DRY VAN, 16K WALTCO LIFT, BAL OF 5 YRWTY, 60,000 KM, WELL MAINTAINED, LOCAL, CLEAN UNIT,
2014 INT’L PAYSTAR SBA 6X4, CUMMINS 550 HP, 18 SPD, 20/46K AXLES, ALUM WHEELS, TRANSFER DUMP READY, LEATHER, LOADED, READY FOR SPRING WITH AN ORDER TODAY.
CALL
REDUCED!
$32,995 Stk# 301-1017
BWS / EZ2LOAD are one of Canada’s top quality trailer manufacturers. They have broadened our trailer line in BC with different models of tag hydraulic detach and logging trailers.
2014 INT’L 9900i, CUMMINS ISX15 500 HP, 18 SPD, 244" WB, EAGLE INTERIOR, LOADED, 72" HI-RISE, 14/46 AXLES, 2 TO CHOOSE.
2007 INTERNATIONAL 9400i, 72 IN PRO SLEEPER, ISX CUMMINS ENGINE 525HP, 12 SP OD, AIR RIDE, ALUMINUM WHEELS, 234 IN WHEELBASE, 12/40 AXLES, GOOD RUBBER, NO DPF!
$19,995
OFFERS!
Stk #: 301-1026
1994 FORD L9000, CAT 3406, 15 SPD, 20/40s, LANGFAB 16' DUMP W/HIGH LIFT GATE, 586K KM, CERTIFIED.
$29,950
(3) 2011 INT’L PROSTAR, 475 HP, 13 SPD, JAKE, 73" SKY RISE DOUBLE BUNK, 520K KM, BAL. OF 5 YR. WTY, 13.2/40 AXLES, 3.58 RATIO, EAGLE TRIM, BLACK.
CALL
N OAC
OW $0D
Stk# 201-943
2008 HINO 185, 175 HP, ALLISON AUTO. 18K GVW, CAB CHASSIS, LP19.5’S, AIR, PW, PL, AIR SEAT, NEW TIRES, RECENT MAINTENANCE, 115K KM.
N OAC
OW $0D
$104,596
2013/14 INTERNATIONAL TERRASTAR CREW CAB, 4X2 & 4X4, INT’L MF7 ENGINE 300 HP, ALLISON AUTO, 203" WB, 84" CA, 19,500 GVW, SEATING FOR 6.
CALL
Stk# TS-29
2012 INTERNATIONAL TERRASTAR STANDARD CAB, INTERNATIONAL MF7, 300HP, ALLISON AUTO, 84" CA 158" WB, 19500 GVW, FALCON EQUIP HOOKLIFT, DUMP, SANDER, AND FRONT PLOW PACKAGE.
1-888-447-4488 EDMONTON, AB
1-887-492-5445 PENTICT0N, BC
www.summittrailer.ca
2014 INT’L WORKSTAR SBA 6 X 4, N13 SCR 475 HP, 18 SPD, 20/46K AXLES, ALUM WHEELS, REDESIGNED SLOPE NOSE, 16’ 6” LANGFAB LIGHT STEEL DUMP, PONY READY W/PINTLE, LOADED, WORK READY.
Phone: 604-888-2888 www.harbourinternational.com
Page T-12
Your Truck & Trailer Connection, Since 1971
MEDICINE HAT: 403.526.8332 LETHBRIDGE: 403.327.7611 CALGARY: 403.569.4800
NEW WEST TRUCK CENTRES HEAVY TRUCK SALES, PARTS SALES AND REPAIR SERVICE 2011 FREIGHTLINER CASCADIA
505hp, DD15, 13 spd, 12+40 axles, 3.55 ratio, 3 way lockers, 72” raised roof sleeper Stock# C1569
2008 FREIGHTLINER COLUMBIA DD60,
70” mid-roof sleeper, 13 speed, 12+40 axles, 3 way lockers, ONLY 479,000 kms Stock# C1434
February 2013
Feds Finalize Regulation For Boat Tails In Canada Full length boat tails on Canadian trucks are one step closer to becoming a reality. Currently, there are no full length boat tails operating on Canadian highways. The Canadian Trucking Alliance (CTA), expects this to change as a result of a published regulation change to Canadian Motor Vehicle Safety Standard 223 (CMVSS 223). The changes will allow for greater variety of “boat tail” designs to be used by trucking companies once the provincial regulations are updated.
Boat tails are devices installed on the rear of trailers that reduce aerodynamic drag, thereby reducing GHG emissions from heavy commercial trucks that adopt the technology. Prior to the change by Transport Canada, the regulations severely restricted the ability for provinces to address boat tails in their own regulations and thereby the ability for trucking companies to deploy the use of this technology. Boat tails are in wide spread use in the United States and this change sets the stage for the use of
this technology on a North American scale. The revisions to the standard were championed by the Canadian Trucking Alliance (CTA), its provincial association partners, as well as the provincial and territorial governments that participated on the Task Force on Vehicle Weights and Dimensions. The next important step in the process will be for all provincial associations to work with their government partners to bring about regulatory changes to allow the widespread adoption of this technology. CTA will continue to work with Transport Canada to ensure boat tails designed to the new Canadian standard receive reciprocal recognition in the United States. b
4020 CU. FT.
2013 FREIGHTLINER 108SD Cummins ISC, 300 hp, Allison 3500 RDS, 15’ Renn box, Electric tarp, 14 + 40 axles Stock# BW5594
PLEASE CALL FOR PRICING - 403.569.4800
2009 FREIGHTLINER CASCADIA SERIES
2014 IMCO “SMOOTHWALL” ALUMINUM WALKING FLOOR TRAILER.
“Finally a Smoothwall you can actually repair!” Bolted design won’t stress crack and you can replace a single panel. Super “B’s” available.
STOP STANDING AROUND!
WE ALSO RENT WALKING FLOOR TRAILERS!
140 cu. yd. High cube belt out trailer unloads in only 4 minutes!
560 hp, DD15, 18 Speed, 72” raised roof sleeper, headache rack, 24.5 tires, 12+46 axles Stock# C1568
WALKING FLOORS
5,000 CU. FT.
Available in TAC legal or longer beetle kill configurations. Built with the industry’s most durable, patented, “Core-lok” wall system. Finally a super “B” you can afford to pull.
(2) 2011 IMCO 53' HI-CUBE CHAIN OUT TRAILERS
2011 FREIGHTLINER CORONADO SD
“Dura-lok” aluminum, smoothwall, hydraulic tarps, hydraulic lift door, tridem air ride, Alcoas, unloads in 5 minutes!
475 hp, DD15, 18 speed, 18+46 axles, 4.10 ratio, full lockers, ONLY 132,000 kms Stock #C1625
ONLY 2 1 LEFT!
2014 MITSUBISHI FG4X4
4-stroke turbocharged water cooled 4P10 3.0L engine, 161 hp @ 3500rpm, 33 gal fuel tank, Fuso Duonic 6-speed OD AMT w/transfer case. Stock #214109 MEDICINE HAT:
403.526.8332
LETHBRIDGE:
403.327.7611
CALGARY:
403.569.4800
www.newwesttruck.ca
1999 WESTERN BELT OUT TRAILER 48' tridem, aluminum post and panel, roll tarp, swing rear door with knife gate, new CVI.
2009 GERRY’S SUPER ‘B’ ALUMINUM SIDE DUMP TRAINS High cap. 47.5 yd3, air ride, 11R22.5 tires w/Alcoa rims, roll over tarp systems, new cert. Sets avail.
February 2013
Your Truck & Trailer Connection, Since 1971
MACK Twin Y Air Suspension Wins Prize The MACK Twin Y Air Suspension won the 2013 Swedish Steel Prize, an annual award recognizing the world’s most innovative design utilizing highstrength steel. The award was given by SSAB, the global expert in high-strength steel, during an event Nov. 21 in Stockholm, Sweden. Mack Trucks was one of four finalists for the award. “Mack Trucks demonstrates how innovative and skilled development can help us to take advantage of high-strength steel to make stronger, lighter, and more sustainable products, which is one aspect of what the prize is intended for,” said Melker Jernberg, Chairman of the Swedish Steel Prize jury and head of the EMEA business area within SSAB. The Mack Twin Y air suspension is the trucking industry’s first suspension to utilize high-strength
steel in a unique Y-shaped design. The strong, yet lightweight design greatly reduces suspension windup and significantly improves tire traction and braking control. “It’s an honor for Mack Trucks and the Mack Twin Y Air Suspension to be recognized for innovation in a global competition,” said John Walsh, Mack vice president of marketing. “As a trucking industry leader, it’s gratifying for Mack to continue to move the industry forward, being always mindful of delivering unmatched performance, fuel efficiency and comfort for Mack customers.” Mack will donate the 10,000 euros ($13,400) SSAB awarded to Mack for winning the Swedish Steel Prize to the Wounded Warrior Project, a non-profit that empowers wounded service members in the United States, raising pub-
t
lic awareness and providing unique, direct programs to meet the needs of injured servicemen and women. As an American manufacturer and brand, Mack Trucks has long been a supporter of the U.S. military dating back to World War I when Mack first became a supplier to the U.S. and other Allied forces. “When we introduced the Twin Y suspension, we knew that it would be of great value to our customers and could change how the trucking industry designs suspensions, but didn’t anticipate recognition on this scale,” Walsh said. The Twin Y Air Suspension was introduced in January 2013. It utilizes two stamped high-strength steel Y-shaped blades at each wheel end. Along with improved tire traction and braking control, the suspension also offers a more stable ride, better handling
and gains in fuel efficiency. Because of the greater flexibility of the steel and the reduced torque reactivity and lighter weight design of the Twin Y, truck components last longer and tire life is extended. Available on the MACK Pinnacle Axle Back and Axle Forward models, the Twin Y is paired with the MACK S38 and S40 series axles and C125/126 and C150/151 carriers ensuring that all components are designed to seamlessly work together. The load of the suspension is completely on the air ride and not on the pivot bushing, which is another design feature that makes the Twin Y a smoother, more comfortable alternative to traditional suspensions. “At Mack, we pride ourselves on building innovation into each of our trucks that enhances the experience of our customers,” said Greg Kiselis, Mack Trucks Principal Engineer. “To be recognized by SSAB as a world leader in the use of a material like high-strength steel, helps us know that we are driving product development in the right direction for the trucking industry.” b
Page T-13
Hendrickson Releases Universal Tilt Mount For International Prostar Hendrickson Bumper and Trim announces the release of the All Makes AERO CLAD bumper for ProStar with universal tilt mount that retrofits all model year trucks. The uniquely engineered design will convert any fixed mount bumper into a tilt mount configuration and is fully compatible regardless of truck model year. In addition, the ProStar AERO CLAD bumper offers nearly 4” of additional ground clearance compared to the factory supplied plastic bumper and is 15 pounds lighter than the standard plastic bumper with chrome overlay. Hendrickson also offers a complete line of bumpers for ProStar trucks including a variety of materials, including AERO CLAD and AERO GUARD, and several mounting options. AERO CLAD offers the look and finish
of chrome, is corrosion resistant and is less weight than traditional metal. AERO GUARD, injected molded resin, offers extreme durability not found in typical injected molded bumpers. With several combinations of materials and mounts, Hendrickson has a ProStar bumper to meet a variety of customer demands. AERO CLAD and AERO GUARD ProStar bumpers are available exclusively through the Hendrickson All Makes program and can be purchased from International Truck dealers. For additional information on ProStar bumpers and for a complete listing of other All Makes Bumpers, please contact: Hendrickson Bumper and Trim at 800-356-6737 or ncarr@ hendrickson-intl.com. b
truckpost.ca
65 more units available at www.internationalmachinery.com 1-888-480-9401 | Maple Ridge, BC View our online inventory on your mobile device
2012 KW T800B, 485 HP, 18 SPD, 20 X 46 AXLES, 140K MILES, EXT. DAYCAB, LOADED $99,500
2009 KW T800, 500 ISX, 18 SPD, 20 X 46 AXLES, 36" AERO CAB, 425K MILES, LOADED $89,500
2008 CHEV C4500, 300 HP, ALLISON AUTO, 4 X 4, 13' SERVICE BODY, 10 COMPARTMENTS, MILLER WELDER, STAHL CRANE, COMPRESSOR, 108K MILES, LOADED SERVICE TRUCK $79,500
2007 KW W900, 475 ISX, 18SPD, SUPER 40'S, 72" AEROCAB, LOADED $59,500
2007 PETE 335, 330 CAT, 10 SPD, COMPRESSOR, GREASE PUMPS, 1000 US GALLON DIESEL TANK, OIL, ANTI FREEZE, TANKS, MISC. PRODUCT TANKS, LOADED FUEL & LUBE TRUCK, 92K MILES $98,500
2007 WS 4900, 600 CAT, 18 SPD, 20 X 69 AXLES, 479K MILES, LOADED TRI-DRIVE $86,500
2007 GMC C8500, 215 HP, ALLISON AUTO, 2200 USG WATER TANK, FRONT, REAR, SIDE SPRAY BARS, 8600 MILES, NEAR NEW $49,500
2006 WS 4900, 515 DETROIT, 18 SPD, 20 X 69 AXLES, 310K MILES, LOADED TRI-DRIVE $84,500
2006 WS 4900, 475 CAT, 18 SPD, 14 X 46 AXLES, 424K MILES, LOADED $54,500
2005 WS 4900, 550 CAT, 18 SPD, 20 X 69 AXLES, 384K MILES, LOADED TRI-DRIVE $69,500
2005 FREIGHTLINER M2 112, 450HP, 18 SPD, 20 X 46 AXLES, 16'6" NAHANNI DUMP BOX, HIGHLIFT, PLUMBED FOR PONY, 297K MILES $49,500
2003 KW T800B, 550 SINGLE TURBO CAT, 18 SPD, 69K TRI-DRIVE REARS, 325K MILES, LOADED TRI-DRIVE $54,500
TRUCKPOST PHOTO Take a picture of your Truck
Visit www.truckpost.ca
Click on Submit Truck Photo Ad to upload your info
Questions? Call 1-800-663-4802
ADS FIND MORE TRUCKS ON-LINE AT
WWW.TRUCKPOST.CA
It ’s that easy !
PAGE T-14 · FEBRUARY 2014
WWW.TRUCKPOST.CA
2012 KENWORTH T660
2006 F-550 XLT
$103,900
IN STOCK 2014 CROSS COUNTRY TRIDEM TILT
NEW 2014 TRAIL KING
$54,000
Cummins ISX 525 hp, 18 spd, 13.2K fronts, 40K rears, 3.55 ratio, 232" wheelbase, 72" sleeper, 571,000 kms. $103,900.
2006 F-550 XLT, 190,000 kms, Std Trans, c/w Brutus service box, Honda air pack, new 302 EFI welder (29 hrs), Maxilift 4400W crane, inside & outside lights, heater & vise, built-in tool box, bolt bins, etc. Asking $54,000.
Tridem, air tilt, air ramps, fir floor, toolbox, 2 speed landing gear, adjustable pintle hitch, 235/75R17.5 radials. Call for further information.
New 2014 Trail King Rolled Side Super Hi-Lite Live Bottom Trailer, 106 cubic yards, aluminum box with 3/16" HMW liner, 12'10" side walls, 48" continuous belt, Intraax 60"-60" tridem suspension, 11R22.5 on aluminum wheels.
GREATWEST KENWORTH
HYWOOD TRUCK & EQUIPMENT
MANAC WESTERN
MANAC WESTERN
Call Jon 403-537-2273 or 1-888-253-7555 2012 CROSS COUNTRY TUB QUAD WAGON
$66,500
Call Dan 250-505-3681 or danic@netidea.com TRAIL KING NEW 2014 TK110 HDG
604-888-4188
2012 F-550 XL 4X4 PLOW TRUCK
S/S 9' dump body, 24" alum. back pack with S/S doors, Cirus “Black-Tip” dual joystick controller for hoist & plow functions, E-Z Spread 3 chan elect. spreader controller, Compact tank/valve encl., 4 yard3 Swenson 9' MDV S/S sander, Arctic 9' hyd. plow with galvanized frame.
DEL EQUIPMENT
604-941-6241 or cdowall@delequipment.com
TRANS PACIFIC TRAILER 250-868-2178
604-888-4188
2005 HENDRICKSON NARROW BEAM SUSPENSION
Trail King New 2014 TK110 HDG, 55 ton, tri axle lowbed, 10' wide, dual hydraulics, Honda 13 hp self-contained unit, LED pkg, 60" spread, air ride suspension, flip up neck extension, reinforced for booster. Call for further info.
2012 Cross Country Tub Quad Wagon, air ride, 11R22.5 on aluminum, grease bank, electrip flip tarp, new tub body, very clean. $66,500.
MANAC WESTERN
604-888-4188
AUTOCRANE CRANES!
$6,500 OBO 2005 Hendrickson Narrow Beam Complete Suspension, with Intraax axles, 60/60 spread, 11R22.5 tires, steel wheels, with ABS. $6,500 OBO.
We stock Autocrane cranes! We have Econo-tons, 3203EHs, 4004EHs and 5005EHs in stock ready for immediate delivery.
CALL HARLEY
DEL EQUIPMENT
604-852-1090
TRUCKPOST OVER 23,000 Copies In Circulation! BOOK YOUR AD TODAY CALL
1-800-663-4802
604-941-6241 or cdowall@delequipment.com YOUR AD COULD BE HERE...
$99 per truck ad • Full colour photo ad of your new or used truck. • Exposure to 13,000+ Supply Post Readers, and 12,000+ Online Visitors. • Only $99 to advertise! (per individual unit). • 30 words max.
CALL SUPPLY POST TODAY! 1-800-663-4802
February 2013
Your Truck & Trailer Connection, Since 1971
Michelin Latitude Cross S3 Masters Welsh Forests Wales Rally GB, the final round of the 2013 FIA World Rally Championship, lived up to its reputation as one of the most complex events of the season. The mud and extremely slippery Welsh forest tracks proved a grueling test for the drivers, but the soft-compound Michelin Latitude Cross S3 tire enabled them to produce some outstanding performances and put on an exciting show for spectators. This is an event that traditionally throws rain, wind,
fog and sometimes even snow at competitors, but this year’s weather conditions proved less delicate than expected. Even so, the sky remained threatening and the temperatures were chilly throughout, and the absence of rain had a direct influence on team strategies since the crews had to contend with big differences in the amount of grip they encountered compared to what they had come across during their rainy recce earlier in the week. More difficult still was the thin layer
of mud that coated the rocky base and made it as slippery as if it were covered in a layer of wet moss. Despite these unpredictable and constantly shifting conditions, the crews were able to count on the consistency, performance and grip of their Michelin Latitude Cross S3 tires. Sébastien Ogier (winner, Volkswagen Motorsport) said, “There really wasn’t much grip on the stages, and the little grip that was available was inconsistent.
Alberta Youth Link Up With The Trucking Industry About 20 young adults spent the day exploring careers in the trucking industry by visiting one of the country’s award winning trucking companies where they toured the facility, talked to staffers about their jobs and took a turn at the wheel of a truck driving simulator. The one-day snapshot look at the trucking industry was made possible thanks to AMTA and Bison Transport (Calgary). The program, under whose auspices the activity was delivered is called Linking
Up, a pilot project of the Van Horne Institute. The purpose of Linking Up is to interest young adults in supply chain careers. AMTA worked closely with Bison Transport to deliver a first-rate day that featured several talks from Bison staff, including interesting presentations by senior company executives and managers through to dispatchers, drivers and safety counsellors. The day kicked off with participants arriving by bus at Bison’s Calgary facility
where they were greeted by AMTA and Bison representatives and welcomed to the company’s training classroom. They then received several presentations about topics that included a look at the vital role the trucking industry plays in the economy and about sustainability in trucking (and at Bison). Next up, AMTA Road Knight Reg Moulding (Bison Transport) provided an overview of the wide range of careers available
The first passes proved very delicate because of all the slippery mud on the driving line. You just had to choose a line and stay on it if you wanted to post a competitive time. The second passes were even more of a challenge. After the cars had been through once, the hardpacked roads became incredibly slippery in places where the stony base was now covered in a film of packed dirt. Thankfully, our Michelin tires were perfectly suited to the situation and delivered the necessary grip and responsiveness to permit some fast times and I was always able to push that little bit harder whenever I wanted to. This year’s Wales Rally GB was all about knowing where to in trucking both behind the wheel and behind the scenes. Moulding was followed by a Bison dispatch supervisor who spoke about his career path and job at Bob. After lunch the group received a guided facility tour and wrapped up the day with time behind the wheel of a truck driving simulator. “I like that the participants were exposed to different professions surrounding the industry, and that they were able to actually touch a truck and practice driving one. There are a few participants who are interested in trucking, and left the visit inspired,” said Kathryn Semcow, Linking Up Project Consultant, with the Van Horne Institute. b
Page T-15 lift just enough not to go off the road for good.” The world champion’s words were echoed by those of Jacques Morelli, Manager of Michelin’s rally programs, who said, “I would obviously like to congratulate Sébastien Ogier on his brilliant performance which brings an exceptional season for him and our partner Volkswagen Motorsport to a successful end. I would also like to underline the job done by the Michelin Latitude Cross S3 tire and how well it stood up to the punishment that this year’s Wales Rally GB threw at it. Add water and mud to the
stone- and slate-covered stages and you get a particularly aggressive mix, and it was important to protect against the risk of sharp rocks slashing the tires. At the end of the day, though, our partners didn’t suffer any punctures whatsoever. I believe that speaks volumes for the hard work put in by Michelin’s developers ahead of the 2013 season. The regulations for this year were very demanding because of the lower tire quotas per event, yet all our solutions rose to their mission to provide our partners with an exceptionally high level of overall performance.” b
#26 19695 - 96th Ave, Langley, BC
• ENGINE REPAIRS • BRAKES • SAFETY INSPECTIONS • FLEET MAINTENANCE MONDAY to FRIDAY
7:00am to Midnight SATURDAY
8:00am to 8:30pm
604-888-3838
Canada’s Foremost Designer & Manufacturer of Custom Trailers
85 Ton Hydraulic Neck Combination
Aluminum Truck Box and Pony Trailer
In Canada or the USA call toll free 27360 - 58th Crescent, Langley, BC
1-888-880-5544
www.klinetrailers.com
Page T-16
Your Truck & Trailer Connection, Since 1971
February 2013
PUGET SOUND TRUCK SALES 253-863-7646
4X4
2006 Ford F550 4x4. Powerstroke diesel, automatic, 17,950# gvwr, 12’ flatbed, LOW MILES!! Other flatbeds available.
Freightliner FL80 S/A dump truck, 8.3L Cummins, auto, PS, AC, AM/FMm air brakes, hydraulics for plow and sander, trailer equipped, Ex-country truck.
(3) 2006/05/04 Ford F550 4 x 4, Powerstroke auto, 2200# crane, air compressor, Miller welder, (3) lube tanks, grease keg, waste oil system, LOW Miles.
FUEL
2008 Sterling w/Amrep Roll-Off, MBE 460, engine brake, 10 spd, PS, AC, AM/FM, 18K x 40K axles, Tuff-Trac susp., LOW MILES, EXCELLENT CONDITION.
CK
E TRU
ERVIC
4X4 S
(2) Freightliner M2/112 T/A Dumps, C13/410hp, Allison Auto, PS A, CC, Jake 16k FA, 40k rears, Locker,Chalmers susp, ex-power co, truck, low miles.
KS
TRUC
(2) 1992 International 4700 w/Isometrics, 200 gal single comp. stainless fuel tankers, pump, meter, hose reels, DT 466, auto, PS, air brakes, ex-US gov’t units. Low low miles.
1988 Freightliner FL112 T/A Dump Truck, 60,000# GVW. Detroit series 60/350 hp diesel, Fuller RTO14708LL trans, PS, AM/ FM, Jake brake, 20k x 40k axles, Hendrickson spring susp, air hitch, trlr pkg, ex-country truck, Exc cond, w/new paint.
SURE
PRES
1996 Ford FT900 T/A Dump, 8.3 Cummins/250 hp, 9 spd, PS, AC, AM/FM, air brakes, 6x6, 10 yd Crysteel dump box, ex-US gov’t truck, VERY LOW MILES.
1998 Peterbilt 357 T/A w/IMT13426-14, 800# Knuckleboom crane, 30’6’ max reach w/auger, flatbed, NTC315, Cummins, 8LL, Jake, PS, 14.4# FA, 38K rears, Hend, Pad susp., Only 53,000 TOTAL MILES, VERY CLEAN!
2001 Freightliner FL80, w/Camel 200 Hydro Excavating/Catch basin cleaner, 8.3L Cummins, auto, PS, AM/FM, ex-city truck, UNDER 6,500 ORIGINAL MILES, Call for specs.
2003 International 2574 Daycab truck-tractor, Cummins N14/425 hp, 13 spd, PS, C/C, AM/ FM, H/M, Jake, 12K FA, 40K rears, Hendrickson air susp., only 77,000 total miles, EX GOVT UNIT.
1997 International 8100 T/A w/Towtem continuous chain roll-off, Cummins M11/300 hp, Jake, 18 spd, PS, AC., CC, AM/FM, Hendrickson susp, EX-COUNTY UNIT, Nice.
1999 Sterling LT8500, 6x6 ROLLBACK, 3126-330hp, auto trans, walking beam, locker diffs, 24' Jerrdan rollback, winch, EX GOVT Unit, LOW MILES.
(4) 2007 Chevrolet 3500 Express 14 Passenger Vans, V8, Auto, PS, AC, AM/FM, C/C, H/M, Trailer pkg, ex-municipal units, VERY CLEAN.
ER
DIGG
1991 International S2674, L10-9spd, Heavy spec, Texoma 330-15. V8 gas engine, pole setter, take up winch, LOW Hours!
2000 International 2574, 4-axle dump, Cummins N14/430 hp Allison auto, PS, AC, AM-FM, CC, Jakek, 18K FA, 40K rears, 12K lift, 16’ dump, pup equipped, just painted, ex-county truck.
2004 IHC 4400, w/Altec mat. handler, 60’ working ht., DT466 Auto, PS, AC, air brakes, full line body, ex power co truck, LOW MILES, EXCELLENT COND, MORE BUCKET TRUCKS IN STOCK, CALL DENNIS SCROGGINS - CELL: 253-606-1748.
1993 International 4900 T/A, w/National series 456A, 10 crane, 56’ sheave height, anti 2 block, 18’ steel flatbed, w/tool boxes, 4 outriggers, DT466 diesel, Allison auto, PS, AM/FM, Low Miles & hrs, EX-COUNTY TRUCK.
1995 Freightliner FL70 w/ Etnyre 2000 gallon oil distribution system, diesel, auto, PS, air brakes, cab controls, diesel burners, low miles, EXCELLENT CONDITION TRUCKS.
Web: www.pugetsoundtrucksales.com E-mail: dennisscroggins@comcast.net
2004 Sterling Actrera w/Hi-Ranger TL50M/58’ material handler squirt boom, 2-man rotating bkt, 2000# jib & winch, 55’ max working height, insulated upper & lower, full utility body, Cat diesel, Allison auto, PS, AC, AM/FM, air brakes, very clean, hard to find.
Call Eves: Cell:253-606-1748
NOBODY BEATS OUR QUALITY! NOBODY!
TRUCKPOST TRUCK
Your Truck & Trailer Connection. Since 1971.
12 ISSUES PER YEAR | 23,000 COPIES EVERY MONTH | NEXT DEADLINE: FEB. 14 | CALL JASON: 1-800-663-4802
| TRUCKSTOP NEWSSTAND LOCATIONS | BRITISH COLUMBIA ————————————————————— Petro Pass 30586 S Fraser Way Abbotsford Cache Creek Husky 959 S Trans Canada Hwy Cache Creek Chevron Cardlock 44025 Yale Rd West Chilliwack Esso Trans Can Truck Stop 7985 Lickman Road Chilliwack Petro Canada Superstop 41420 Yale Road East Chilliwack Shell Cardlock 7970 Lickman Road Chilliwack Petro Canada Cardlock 78 Glacier Street Coquitlam Skyline Truck Stop Esso 5507 Trans Canada Hwy Craigellachie P&R Western Star 3111 Cowichan Valley Hwy Duncan Hope Husky 61850 Flood Hope Road Hope DCF Services Ltd Chevron 1885 Versatile Drive Kamloops Gateway Travel Petro Canada 175 Kokanee Way Kamloops James Western Star 2072 Falcon Road Kamloops Pacific Coast Heavy Truck 2065 W Trans Canada Hwy Kamloops Peterbuilt Pacific 1955 Trans Canada Hwy W. Kamloops Petro Canada 1885 TCH West Exit 30 Kamloops Valley View Petro Can 1639 Trans Canada Hwy Kamloops IRL Truck Centre 1495 Iron Mask Road Kamloops Cookson Motors 1150 Gordon Drive Kelowna Husky Truck Wash 150 Edwards Rd Kelowna James Western Star #2 - 555 Adams Rd Kelowna Kelowna North Chevron Cardlock 2650 Ackland Rd Kelowna Mack Truck 359 Edwards Rd Kelowna Petro Pass 2780 Ackland Rd Kelowna Hotsy Cleaning Systems #112 - 20575 Langley Bypass Langley Island Freighliner 6826 Metro Rd Lantzville Intl Machinery 20230 - 113B Ave Maple Ridge Wagon West Plaza Husky 3999 Airport Road Merritt Berk’s Intertruck Ltd 2230 McCullough Rd Nanaimo Nanaimo Mack 2213 McCullough Rd Nanaimo Husky Truck Stop 9206 Hwy 97 Osoyoos Metro Motors 2505 Lougheed Hwy Port Coquitlam Babine Truck & Equipment 9341 Rock Island Rd Prince George Husky Truck Stop 7620A Vedder Road Sardis Husky Truck Stop Hwy #1 Sicamous Dams Truck Centre 14530 104th Ave Surrey First Truck Center 18688 - 96th Ave Surrey Hino Truck Centre 10847 Scott Road Surrey Peterbilt Truck 19470 96th Ave Surrey IRL Truck Center 7156 Meadowlark Rd Vernon Petro Pass 3308 48th Ave Vernon ALBERTA ————————————————————————— Acheson Husky Hwy 60 South Acheson Acheson Petro-Can/A&W Hwy 60 South Acheson Rosie’s Esso Hwy 1 Bassano Petro-Can Hwy 1 Brooks Esso 2515 50th Ave SE Calgary Calgary Husky 2525 32nd Ave NE Calgary Flying J 11511 40th St Calgary Flying J 4216 72nd Ave Calgary Greatwest Kenworth Ltd 5909 6th St SE Calgary Road King 4949 Barlow Trail SE Calgary
ALBERTA ————————————————————————— Blackfoot Diner 1868 9th Ave SE Calgary Diamond Int’l Used Trucks 17020 118th Ave Edmonton Flying J Sherwood Park 50 Pembina Rd Edmonton Road King Sherwood Park 26 Strathmoor Dr Edmonton Truckland 85 East Lake Cres NE Edmonton Nortrux 18110 118th Ave NW Edmonton Stahl Peterbilt 18020 118th Ave NW Edmonton Petro-Can Hwy 16 Innisfree Nisku Truck Stop Leduc 8020 Sparrow Dr Leduc Husky Hwy 1 Medicine Hat Glover Int’l Trucks 6444 67th St Red Deer Red Deer Flying J 6607 67th St Red Deer Redcliffe Esso 1900 South Hwy Dr SE Redcliffe Strathmore Husky 436 Ridge Rd Strathmore Nisku Flying ‘J’ 302 20th Ave Strathcona Cty. SASKATCHEWAN —————————————————————— Caronport Husky 1st Ave Caronport Esso Indian Head Hwy 56 & Hwy1 Indian Head Husky 5721 44 Street Lloydminster Frontier Peterbilt 5201 40 Ave Lloydminster Redhead Equipment 4404 37 Ave Lloydminster Esso Hwy 1 Maple Creek Flying J Moose Jaw 370 N Service Rd Moose Jaw Tempo Hwy 1 Moose Jaw Humpty’s Petro-Can Hwy 16 North Battleford Hwy 16 Truckstop Paynton Hwy 16 Paynton Nistors Truck Stop Bower Crescent Regina Regina Husky 1755 Prince of Wales Dr Regina Redhead Equipment 705 Henderson Dr Regina Flying J Saskatoon 3850 Idylwyld Dr N Saskatoon Marquis Dr. Husky 2035 Idylwyld Dr N Saskatoon Redhead Equipment Hwy 16 N Saskatoon Esso Hwy 1 Swift Current Swift Current Husky 1510 South Service Rd Swift Current Redhead Equipment 2604 South Service Rd W Swift Current Humpty’s Petro-Can Hwy #9 Yorkton MANITOBA ———————————————————————— Co-op Hwy 1 Austin Brandon Esso 1815 Middleton Ave Brandon Brandon Husky 1990 18th St N Brandon Flying J Headingley 4100 Portage Ave Headingley Husky Headingley 5141 Portage Ave Headingley Deacon’s Corner Petro-Can Hwy 1E Springfield Esso Oakpoint 100 Oak Point Highway Winnipeg Oakpoint Diner 533 Oak Point Hwy Winnipeg Quik-X 2575 Inkster Blvd Winnipeg Sun Valley Diner 433 Oak Point Hwy Winnipeg Shell Flying ‘J’ Brookside Blvd Winnipeg Petro Can 500 Oakpoint Hwy Winnipeg
SHORT HAUL | LONG HAUL | DRIVER RECRUITMENT | TRUCKS & TRAILERS FOR SALE Jason J. Chan | Advertising Consultant | Cell: 778-882-4881 | E-Mail: jason.chan@supplypost.com 105 - 26730 56th Avenue, Langley, BC, Canada V4W 3X5 | (604) 607-5577 | 1-800-663-4802 | Fax: (604) 607-0533
NEXT DEADLINE IS Friday, Feb. 14th, 2014