YOUR TRUCK & TRAILER CONNECTION, SINCE 1971
WWW.TRUCKPOST.CA
JANUARY 2013
TRUCKPOST Publications Mail Agreement #40070144
HAPPY NEW YEAR!
More Truck Photo Ads PAGE T-12
NEW MANAC WALKING FLOOR
2007 FREIGHTLINER COLUMBIA
2006 WESTERN STAR 4900SA
2010 INTERNATIONAL 4300 SBA
P.O.R.
P.O.R.
New Manac Walking Floor - available late January. 53 foot, Tridem Intraax air ride, Keith floor system, smooth side aluminum panels, 22.5 on aluminum wheels. Call for details.
2007 Freightliner Columbia, MB450, 10 spd, 40 diffs, 60" mid roof sleeper, 771,741 kms. P.O.R.
2006 Western Star 4900SA, MB 450, 18 spd, 40 diffs, 68" double bunk sleeper, 1,153,259 kms. P.O.R.
MANAC WESTERN
WESTERN STAR & STERLING TRUCKS
WESTERN STAR & STERLING TRUCKS
604-888-4188
604-882-0902
604-882-0902
P.O.R. 2010 International 4300 SBA 4 x 2 (12-151) with 26' Van Body, MaxForce DT466 210 HP Engine, Automatic w/OD, hyd. Brakes, 91,303 miles, 26' x 102" wide x 110" High Cube, 6 month power train warranty, A/C, Cruise, 52 gal fuel tank, B.C. Cert., 14' Aluminum Ramp.
RIGHT TRUCKS 604-584-9555
Your Truck & Trailer Connection Since 1971
www.truckpost.ca
Page T-2
Your Truck & Trailer Connection, Since 1971
Minding Your Business by Kathryn Thorpe Klassen
Happy New Year! W
elcome to 2013. If you are reading this it means that the world didn’t end on December
21st along with the Mayan work on our new year’s come up with a list of the calendar. We all get to keep resolutions. top things they’d like to say on trucking and we have I’ve asked around to to their dispatch. yet another 12 months to a number of drivers and If you’re a driver and you’ve never uttered something similar to the following phrases to your dispatch, you may either want to hug your dispatcher for being so fantastic or learn to speak your mind a little more. If you’re a driver and you’ve said each and every one of these to your current management team, then maybe you will want to resolve to speak your mind a little bit less, or find a new job and/or dispatcher… Finally, if you are a dispatcher and you’ve had any more than a couple of the following thrown at you by a frustrated driver, you may want to consider a ride along to see what life is really like behind the wheel. If you think you can do better, why don’t you get behind the wheel and deliver this load yourself? You’ve obviously never sat in a traffic jam on the 401 before have you? Give me some sort of clue what I’m doing after my unload so that I’m not sitting around waiting for you to get around to it while I could be making miles, and therefore making money.
January 2013 Just because the highway reopened doesn’t mean that the three feet of snow that fell overnight has been cleared from the trailer deck, the truck stop parking lot or the side streets needed to get to said highway. If I say I can’t get out yet, I can’t. I want to make money as much as you want me to make it and I’ll go when I can. Don’t ask me more than once a year to deadhead anywhere to rescue that trailer that you forgot about after it broke down, because it isn’t going to pay well and I have bills too. Don’t whine to me about how you have to get out of the office on time tonight due to your social life and obligations when I’m sitting a thousand miles away waiting for an answer from you. I’m on the road 25 days out of every month. I don’t have a social life. Don’t ask me to run over my hours. If I choose to do so that’s fine. It’s my butt on the line, not yours. You’re supposed to be the one looking out for my best interests. Don’t try to skimp on my paycheque. I have plenty of time in my bunk each night to calculate how many miles I’ve driven, what layover pay I’m owed and still keep my eye out for a better job. Don’t act like I tried to blow the turbo in my truck on purpose. Sitting around the dealership for two days over the weekend waiting for the part when I’m 2000 miles from home with a
hot load on the deck isn’t exactly my ideal way to spend a weekend either. Why do you act surprised when I call in from time off and wonder what my load plans are? I told you I’d be back on the 1st of the month. Did you not believe me? I’m sorry I didn’t spend my entire holiday texting you to make sure you remembered who I am and that I work for you. When I said it wasn’t safe to travel I really did mean it. Now I’m in the ditch thanks to black ice and your precious load is gonna be even later than it would have been had I waited for the sand trucks to go by and the sun to come out. I just ran four long days to get this load delivered. I need sleep now. Please avoid calling me for the next eight hours. Unless you have a really great load for me that pays a bundle. Then by all means call. The truck and the driver both require refuelling to keep going. This may involve stopping for more than five minutes. Deal with it. I’m not a customs official, but I do have to deal with them. It would be fantastic if you could inform your customers that they do need to have paperwork for me if they expect me to move their freight across the line. Don’t forget, truckers talk, and I know all your company’s dirty little secrets. I could probably get you in more trouble than you could ever get me in! b
ing brat Cele ars in e 33 Y ess! n Busi
Call Rob Johnston: 250-992-8474 | Fax: 250-992-3100 | E-Mail: johnsteq@quesnelbc.com | 350 Legion Drive, Quesnel, BC V2J 2A3
www.johnstonequipment.ca
2001 Western Star Tractor, S60 Detroit, 18 spd., Rockwell RT46160 air lockers, Hendrickson Airride, 42” sleeper, 245” wb., 16,000# steer axle, Proheat, odometer shows 980,000 km. ................. $24,000.00
1992 Aspen PF35 step deck, 8’ 6” x 48’ tandem trailer, airride, clean and straight .................................... $12,500.00
1997 T800 Logger chassis, N14 Select+, 18 speed, Rockwell RT46160 air lockers, Hendrickson Spring susp., 272” wb., 12000# steer axle, odometer shows 681,000 km. ............................ $21,500.00
(2) 1997 Western Stars 4964 tractor, N14 Select+, 18 speed, Rockwell RT46160 air lockers, RTE suspension, 230” wb., 16,000# steer, odometer shows 580,000 km............................................$15,500.00
1999 Peerless Tridem pole trailer, 8’ 6” bunk, scale pads, pilot alum. wheels, 8’ 6” axles, air ride...... $12,500.00
(2) New ‘one way’ 20’ containers ............... ............................................$4500.00 each
2005 Hiab 200C Hydraulic crane c/w PTO and pump, very good condition.................. $18,000.00
2006 Peterbilt 387 Tridrive salvage unit, RH rollover, Cat C15 MXS with recent w/o’s, 18 speed, Rockwell RT46164 diffs on Pete Airtrac, Michelin 24.5’s on pilot aluminum ................Call for parts pricing.
2005 Peterbilt 387 Tridrive cab and chassis, 36” sleeper, Cat C15 MXS, 18 spd, Rockwell RT46164 on Pete Airtrac, Michelin 24.5’s on pilot aluminum, 20,000# steer axle, double frame, 808,000 km............................................ $65,000.00
2003 Western Star tractor, C15 Cat MBN, 18 speed, Rockwell RT46160 airllockers, Airliner suspension, deluxe sleeper, 245” wb., odometer shows 1.6 mill. Km............. ................................................$25,500.00.
-2007 Brandon 22’ dumpbox for tridive truck, c/w tarp, tow apron, pto, pump and tank ......................................... $20,000.00
New aftermarket Kenworth fuel tanks in stock .............................$850.00-$1100.00
January 2013
Your Truck & Trailer Connection, Since 1971
Kenworth Offers Advice On Spec’ing For Mixers In Canada A mixer is a highly specialized piece of equipment, which is expected to put in a number of years of service. To ensure efficiency over the life of the vehicle, it’s important to spec wisely. A key consideration to spec’ing is the local length and weight regulations since these will dictate the axle spacing needed to maximize payload. Individual provinces require compliance with their specific weight laws. This has a big influence on how the axles are set up and spaced. “For example, the intent of SPIF (Safe Productive Infrastructure-Friendly) law in Ontario is to spread the weight evenly over the wheelbase, which defines where the steer axle goes and has a direct impact on frame dimensions,” says Alan Fennimore, vocational marketing manager for Kenworth Truck Company in Kirkland, Wash. “In most cases, a set-back steer axle or a twin steer is a common mixer spec. The Kenworth T800 is an example of a chassis designed specifically to meet the needs of mixer customers with its set-back and twin steer front axle options.” The Kenworth T800 twin steer model,
which may be more suitable for certain provincial weight requirements, is based off the set-back axle T800 with the second steer axle located 72 inches rear of the front steer axle. The maximum front GAWR is 40,000 pounds. In some provinces, mixer trucks can be specified shorter and lighter with a setback axle to make them more maneuverable on jobsites. The Kenworth T800 short hood and the Kenworth T440 are examples of trucks that work well for these mixer applications. “You may need to spec lift and or steering axles to distribute more weight of the mixer over more axles to operate them in provinces that have limits on the amount of weight each axle or each wheel may carry,” notes Fennimore. Depending on the weight carried by the steer axle and your provincial laws, you may also need to spec wide-based front tires. “This would require a 425/65R22.5 tire size to get to the 20,000-pound rating on the front axle,” says Fennimore. Kenworth dealers, Fennimore adds, work with customers to develop specifications that not only meet provincial regulations, but
TRUCK POST ADVERTISERS INDEX 99 Truck Parts ............................T-6
P & R Heavy Truck Parts ...........T-15
Allen’s Transport .........................T-9
PM Industries .............................T-7
Alquip Diesel ............................T-11
Prince George Truck ....................T-3
DTU..........................................T-10
Puget Sound Truck ...................T-16
Falcon Equipment ......................T-6
Specialized Trailers .....................T-9
Fort Garry ...................................T-5
THR Consulting .........................T-12
Johnston Equipment ...................T-2
Transrep ...................................T-11
Magnum Trailer ..........................T-4
Truck Photo Ads .............T-14 - T-16
Nanaimo Mack ...........................T-5
Western Star Sterling ................T-10
NEXT DEADLINE: Friday, January 18, 2013
TRUCKPOST
For advertising information & rates, please contact us at sales@truckpost.ca or Toll Free 1-800-663-4802 #105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5
www.truckpost.ca
Truck Post is a part of The Supply Post Newspaper Published Monthly - Printed in Canada Publications Mail Agreement No. 40070144 Reproduction of any material including photographs and/or advertisements in whole or in part is forbidden.
also enhance productivity taking into consideration specific operating conditions. Here are some brief examples: In Alberta and British Columbia, to maximize the payload, dealers recommend mixers specified with, among other things, twin steer axles, tandem drive axles, and a booster axle with a maximum wheelbase of 278 inches, a front axle spread of 72 inches and a rear-axle spread of 60 inches. In Manitoba, to maximize payload, dealers recommend twin steerable 20,000-pound steer axles and 46,000-pound drive axles. However, provincial regulations prohibit booster axles. In Ontario, because the SPIF law requires several considerations for a mixer operator – dealers suggest choosing automated transmissions; rear-engine power takeoff (REPTO); back-of-cab exhaust to maximize frame space for chutes and water tanks; a minimum wheelbase of 6 meters; a front axle spread of 72 inches minimum or 106 inches maximum; and a rear-axle spread of 72 inches maximum. In the Atlantic provinces of New Brunswick, Newfoundland and Labrador, Nova Scotia, and Prince Edward Island, dealers recommend a rear-engine power takeoff (REPTO); twin steerable 20,000-pound steer axles and 46,000-pound drive axles; right-hand, back-ofcab 100-gallon fuel tank to maximize frame rail space; a maximum wheelbase of 278 inches; a front axle spread of 72 inches maximum; and a rear-axle spread of 60 inches. In Quebec, they suggest twin steerable 16,000-pound steer axles and two 23,000-pound drive axles, in order to meet a provincial regulation requiring the additional axle to be attached to the steering wheel. In Saskatchewan, dealers suggest using 445/65R22.5 size tires on a single or twin steerable 20,000-pound steer axle for maximum flotation.
“Of course, other provincial restrictions may apply to your operation, and your operating conditions may require different considerations,” Fennimore adds. “Then there’s the fact that provincial regulations often list limits using metric system measurements, while manufacturers may list the measurements of the truck and its key parts using the English measurement system. That’s why you should visit a local Kenworth dealer for a more complete review of provincial regulations and your operating conditions.” 2010 Engines – Making Room for SCR It’s especially important to understand how the 2010 federal engine emissions standards may require some changes to be made when spec’ing for new truck purchases compared to your current mixer spec, which may include a 2007 emission-compliant or older engine. Selective catalytic reduction (SCR) mixes a reductant – most commonly a solution of urea and deionized water known as diesel exhaust fluid (DEF) – with the oxides of nitrogen (NOx) in exhaust
Page T-3 gases. The exhaust then passes through a catalyst, where the DEF reacts with the NOx to convert it into nitrogen and water. According to Fennimore, it is important for operators to consider DEF tank capacity and placement. “To support SCR system integration, Kenworth provides a range of exhaust and DEF tank sizes and locations designed for mixers. This helps mixer operators maintain their wheelbase and body configuration when spec’ing Kenworth trucks with 2010 EPA-compliant engines,” Fennimore says. “For mixers where truck frame space is often critical, Kenworth provides a 5.6-gallon DEF tank with a clear back of cab option unique to the industry. The tank provides a range of 800 to 1,200 miles between refilling with the range dependent on duty-cycle and fuel economy. When combined with an in-cab battery box and a Kenworth SCR and DPF package located under the cab access step, there’s essentially no impact to the customer as far as valuable frame space compared to a pre-2010 emissions truck,” he said.
Not all SCR technology engines are the same, however. “An aftertreatment catalyst using copper zeolite is more efficient than one with iron zeolite at reducing NOx at normal engine operating temperatures,” says Fennimore. “That’s why engines using copper zeolite may offer better fuel economy than engines using iron zeolite.” PACCAR engines and Cummins engines both use copper zeolite. A Green Option: Natural Gas A green option is natural gas. While it does not have the high energy density of diesel fuel, CNG does provide a cleaner burning fuel without the need for complex emission reduction technology. Natural gas is domestically produced, so it reduces reliance on foreign oil. The drawback can be a higher initial engine and fuel storage system cost. However, an estimated $2-plus savings per gallon on natural gas compared to diesel makes the ROI very attractive, Fennimore says. Some provinces may offer grant programs to help offset the additional cost of Continued on page T-4
250-561-1234
1-800-946-9400 www.pgtruck.com
Your 42', 48' & 53' Equipment Trailers
Dealer Large Selection of Tag Trailers
20T & 25T 8'6" & 9'6" Air Tilt & Flip Ramp
EQUIPMENT • 850 Timberjack Buncher ............................POR. • 2200 Madill Buncher, rebuilt 8.3 ...............POR. • 480C Timberjack Grapple Skidder ..............POR. • 219 Cat Buncher...................................$12,500. • TD20G & TD20E Dressers, w/winch ...........POR. • 2000 Timberjack 4x4 20K lb Forklift..... $18,000. • 450A Timberjack Line Skidder..............$18,500. • Cat D5B Crawler, new U/C, winch .............POR. • 1992 Cat 325L Buncher, w/24" Quadco ...$24,900. • 1988 Komatsu 220LC Stroker ..............$19,500. • 3½, 3¾, or 4 yard Loader Buckets .............POR. • 667C Grapple/Line Skidder.........................POR. • Onan 18kW GenSet, 1 or 3 ph., w/trailer ...$7,500. • Volvo 125 KVA Genset, 120/208/460V ...$9,500. • Model 5000-21 Superlift Str. Boom Crane ....$4,950. • Rotobec Grapple, off Hitachi 200 ...............POR. • S/A & Tandem Axle Jeeps ..........................POR.
30 Ton Tri-Axle Paver Tag
EZ-2-LOAD Drop Decks & Flatbeds
TRUCKS & TRAILERS • 1988 Freightliner Cab Over, 3406B, 46's ...POR. • 1994 Peterbilt 377, N14, 18, 46 .................POR. • 1991 GMC Topkick Serv Fuel Truck, crane ........ ..............................................................$12,900. • 2005 48' Great Dane Tandem, w/tailgate ..POR. • ‘05 Westec Vac Tank ..................................POR. • 2000 Trailtech TD310, 36,000 lb. Tag .........POR. • 1990 Decap Tridem Cross Dump Trailer, close under load ............................................$18,900. • 1997 Freightliner N14, 46 w/wet kit ..........POR. • 1996 Autocar S60, 18, 46, on air................POR. • 1990 ParPac Tri-Axle, short log..................POR. • 1986 Fruehauf 48', walking floor .........$15,500. • 1997 Tycrop Chip Trailer, 53' walking floor, tri .. POR. • 1990 KW T800, Cummins, 5th wheel ...$16,500. • 1985 Mack R688 Tandem, E6350...........$9,500. • 1981 Ford, 20' box, p/tailgate, Allison tr ..$4,950. • 1980 Lincoln S/Drop Lowbed, 8' ............$9,500. • 1988 Totem Tri-Axle ...............................$7,500. • 2000 Peerless Tri Hayrack, 8'6", air .....$21,900. • 1998 Trail Tech Tilt Trailer, 17,000 lbs ...$6,500. • 1989 Hino & 1995 Topkick 24' Van, P/Tail .POR.
WRECKING • G67 Grapple • TD20E • Cat D5B • Cat 219 Buncher • Timberjack 450A & 520 Grapple Skidder • Hitachi EX200-5 • 230 & 404 Timberjack Line Skidder • Clark 668B Line Skidder • Clark 125B Loader • John Deere 693D • Treefarmer C7 & C8 Line Skidders • 82-40 Terex • TS24 • Warner & Swasey Grad-All 300 Hydro Cruiser • Komatsu 220LC • Good selection of Detroit Diesel, Allison, Clark, Twin Disc, Cat, Cummins and Perkins engine and transmission parts.
250-561-1234 · 1-800-946-9400 · www.pgtruck.com
Page T-4 Continued from page T-3
the alternative fuel engine technology and fueling stations. Plus, by deleting the additional weight associated with the SCR emission control systems, a CNGpowered mixer may be able to carry more payload over a comparable dieselpowered unit. But that depends on the distance the mixer must travel each day and your choice of fuel. Some operations may require specifying CNGpowered trucks with additional fuel tanks, which could offset any weight savings realized with the deletion of the emission control systems. Plus, if you choose liquefied natural gas over CNG fuel because of its higher energy density, the LNG-powered engine employs a compression ignited system, which uses 5 percent diesel as the pilot ignition. And this requires the use of SCR technology and a diesel particulate filter (DPF). If the mixer must carry additional fuel to extend its range or its operating time between fuelings, some provinces, like British Columbia, do offer greater weight allowances on some natural-gas powered trucks, which would offset any weight penalties caused by the additional fuel tanks. Natural gas-powered engines, such as the Cummins Westport ISL G and the ISX12 G engines, are available for heavy duty
Your Truck & Trailer Connection, Since 1971 Class 8 trucks, including the T660, T800, T800 short hood, W900S, and the T440. The ISL G, which runs on compressed natural gas, is rated at 320 hp and 1,000 lb-ft of torque. It uses a maintenance-free, threeway catalyst and is 2010 EPA- and CARB-compliant without the use of SCR technology or a DPF. The ISL G is available with an Allison 3000 or 4000 series transmission. The ISX12 G, which can run on CNG or LNG, comes with a range of ratings to 400 hp and 1,450 ft-lbs of torque, optional engine brake and manual and automatic transmission capability to meet customer needs. (The ISX12 G was introduced earlier in 2012 and should be ready for order and delivery in early 2013.) It’s important to work with your truck salesperson and mixer body builder to assess which fuel storage system – CNG or LNG – will work best for you. “Your decision may be determined by the availability of CNG or LNG fuel in your area,” Fennimore says. “Currently, CNG is the preferred fuel storage system for mixer applications.” The Drivetrain Whether operators choose natural gas- or diesel fuel-powered engines, big horsepower is generally not a requirement for mixer applications. “You should get just enough
horsepower to do the job,” says Kenworth’s Fennimore. “Engines with 320 to 350 hp should be plenty for most applications. Extra horsepower just uses more fuel, puts more strain on the rest of the drivetrain, costs more and adds weight.” Truck models with the versatility to span class 7 and class 8 ratings, such as the set-back axle Kenworth T440 and T470, can offer operators the widest array of choices to build mixers that will meet their operational needs, Fennimore says. “With the Kenworth T440, for example, operators have a choice of front axle ratings from 12,000 to 22,000 pounds, rear axles from 21,000-pound single to 46,000-pound dual drives and three frame rail sizes to match strength and weight requirements,” he adds. “Plus, the T440 can be spec’d with the PACCAR PX-8, which offers a range of power choices from 260 to 350 hp and from 600 to 1,000 lb-ft of torque.” In cases where additional power and payload is required, the Cummins ISL9 is available with ratings up to 380 hp and 1,300 lb-ft of torque. When additional power is required for a larger mixing drum, or where weight is not as much an issue, a PACCAR MX 12.9-liter or Cummins ISX11.9 engine offers excellent performance. In addition, the larger engines will
last longer. These medium displacement engines are available in the set-forward W900S and the set-back T800 short hood. According to Fennimore, the rear axle ratios should be evenly matched with the transmission so that engine speed is around 1,600 rpm at highway speeds. “You should also be able to go as slow as 1.5 mph at 1,400 or more rpm,” he says. “A 4.30:1 ratio with 11R22.5 tires and the -9ALL transmission works well. With a 6-speed automatic transmission, use a 4.88:1 or lower ratio.” Automatic or Manual Transmission The transmission you put behind the engine needs a wide ratio range to have good startability and gradability around jobsites and on the highway. “The Eaton 9ALL is a common transmission spec for mixers. It has a really low ratio for crawling while pouring curbs or other continuous pours. But there’s also a high enough top end for traveling at highway speeds,” he says. In addition to the standard manual transmission, Eaton offers the vocational series of UltraShift(R) Plus available specifically designed for mixer usage. This automated manual includes the following vocational specific features: Hill Hold and Creep Modes. “We’re seeing more Continued on page T-6
Toll Free 1-800-661-3406 www.magnumtrailer.com Super “B” Short Logger ··T1 High Tensile Steel Flanges ··Sleeved Tubular Floating Crossmembers ··Hendrickson HT250 Suspension ··8'6", 9'6", 10'6" Bunks ··Custom Options Available and Excellent Delivery
Quad Loggers Now Available! 1-800-661-3406 · www.magnumtrailer.com
“Parts & Service Open 7 Days a Week”
January 2013
CSA Changes Take Effect The Federal Motor Carrier Safety Administration recently said that, effective immediately, it has activated previously announced changes to its Safety Measurement System ratings program, including adoption of its controversial proposal to step up hazardous materials compliance and elimination of a perceived enforcement bias against flatbed carriers. In a recent teleconference call, FMCSA administrator Anne Ferro said the agency’s website now reflects a total of 11 changes to Compliance, Safety, Accountability program, including creation of a standalone hazardous materials compliance carrier rating category and rolling cargoSecurement violations into the vehicle maintenance category. FMCSA said when it first unveiled the changes in August that the CSA tweaks would only cause “modest” changes to carriers’ safety-rating scores, but that that would be “enough to sharpen our focus on the carriers that need our focus.”
“These safety measurement system enhancements reflect FMCSA’s commitment to listening to our stakeholders and researching and analyzing enhancements in the name of safety,” Ferro said. “By strengthening our cornerstone enforcement program, we are continuing to raise the bar for truck and bus safety.” Other changes included changing the name of the Fatigued Driving Behavior Analysis and Safety Improvement Category, or BASIC, to the hours-ofservice (HOS) Compliance BASIC, removing 1-to-5 mile-per-hour speeding violations from carrier and driver safety scores, and assigning the same CSA severity weights to paper logs and electronic logging device violations. The changes are being applied to FMCSA’s monthly update of carriers’ SMS scores. The agency generally updates carriers’ scores on or about the 21st of each month, but chose to update the December scores early using the newly uploaded changes. b
Letter To OTA: Many Courteous Truckers Give Peace Of Mind The following is a letter to OTA sent by a cyclist visiting Ontario, who wishes to thank the many courteous and friendly truck drivers he encountered during his journeys: I recently spent two months holidaying near Montreal River Harbour [highway 17 north of Sault Ste Marie]. While there, I was cycling almost daily on the section of highway between Mica Bay and Montreal River Harbour. The purpose of this communication is to express my thanks (through you and your organization) to the transport drivers who regularly frequent that section of highway (and) for the courtesy almost all of the drivers showed to me as a cyclist on the open road. I have carried with
me in my mind, images of drivers pulling out (whenever possible) to give me more air space as they passed me. As my time in that area passed, the courtesy shown by most drivers gave me as a cyclist peace of mind as I shared the road with some very big rigs. Also, the acknowledgement of me on the road when some drivers gave me a friendly ‘toot toot’ with their horns, was an acknowledgement that they were aware of me and that we all are part of the travel / transport scene on a highway. So, again, I (hope) you somehow share my gratitude with those drivers for their courtesy which contributed to me more fully enjoy my holiday in northern Ontario. Cheers, Bill Allcock b
January 2013
Your Truck & Trailer Connection, Since 1971
PSI & Spartan Chassis Launch New Concept Chassis at RVIA Tradeshow Power Solutions International, Inc. (“PSI”) (OTCBB:PSIX) and Spartan Motors, Inc.(Nasdaq:SPAR) recently announced the launch of a new Class A Front Engine Gas (FEG) concept chassis featuring PSI’s newly designed 8.8-liter engine. The new chassis, code named the Extol, is designed to meet increased demand in the RV market for greater power performance and for gas powered engines. Both companies showcased these products at the RVIA National RV Trade Show, which took place November 27--29 in Louisville, Kentucky. “PSI is excited about presenting our newly developed on-highway applications through this collaboration with Spartan Chassis, a leader in the specialty vehicle category,” said Jeremy Lessaris, Director of Marketing at PSI. Recreational vehicle OEMs have been frustrated with their engine options, which until now have been underpowered. Because of the considerable weight, RVs require significant torque for
pickup and to avoid chugging or spitting on hills. As a result, power compromises are problematic. Powered by a PSI 8.8-liter engine that provides 430 HP and 512 lb.-ft of torque (@ 3400 RPM), the Extol chassis offers the power performance that end-users seek in a package developed to capitalize on the growth of smaller Class A recreational vehicles (22K to 28K GVWR). The newly designed and engineered engine offers 20% acrossthe-board improvements in power and 15% better fuel-efficiency over its predecessor, General Motors 8.1-liter. The Extol also provides superior handling and superior ride quality, achieved through Spartan’s proprietary suspension and new Compression Fluid Strut. Spartan Chassis has been known for decades as a leader in the Class A diesel market. This Extol concept chassis is an excellent brand extension which should expand our product portfolio and fill what we
perceive as a gap in the RV chassis market,” said Tom Gorman, Chief Operating Officer of Spartan Motors. “This new chassis development illustrates both our long-term commitment to the RV business and, more importantly, our interest to continually find new business growth opportunities for our OEM partners in the RV industry.” PSI’s high-performance 8.8-liter “big block” replacement was launched at the 2011 RVIA Expo. The new engine is capable of fulfilling power, efficiency, emissions and fuel-flexibility needs across a wide range of applications beyond RVs, including school buses, waste-hauling trucks and light-duty uses. The heavy-duty, durable block includes the following design features: • A significantly stronger crankcase and a forged and induction hardened crankshaft that enable delivery of 1,000 ft-lb of torque. • An intake manifold that incorporates a tuned, long-runner to increase torque • High-flow, fast-burn cylinder heads that ensure a full burn to reduce. b
TOLL FREE: 1-866-758-0185 • LOCAL: 250-758-0185
Brian Burgoyne: 250-616-1233 brianb@nanaimomack.com Richard Mayer: 250-616-1241 rmayer@nanaimomack.com 2213 McCullough Rd. Nanaimo
VICTORIA LOCATION: Keating Industrial Park 1-778-426-0185 Evan Hogarth ehogarth@nanaimomack.com
Page T-5
9515 - 195th St. Surrey, BC FORT GARRY INDUSTRIES IS YOUR “ONLY” AUTHORIZED DISTRIBUTOR FOR LANDOLL TRAILERS, PARTS AND SERVICE. LANDOLL MODEL 455-53 TRAVELLING AXLE, 55 TON, LOW LOAD ANGLE, HINGED FIFTH WHEEL PLATE, WIRELESS REMOTE, 20K WINCH
IN STOCK NOW!
LANDOLL TRAILERS, THE “ORIGINAL” TILTING TRAILER. THE ONLY PATENTED HYDRAULIC TRAVELLING AXLE TRAILER ON THE MARKET. LANDOLL IS THE ONLY MANUFACTURER TO OFFER POWDER COAT PAINT AS A STANDARD FEATURE. ALSO INCLUDED AS STANDARD EQUIPMENT IS A CENTRALIZED GREASING SYSTEM.
NEW 2013 MACK TD714 Titan Tri-Drive Logger MP10-605 HP, Fuller RTLO20918B, 20,000 front, 69,000 lbs Primax, 4:10 ratio, deluxe cab, Artic truck rigging and trailer, Unbelievable power, reliability and price!
NEW 2012 GU433 GRANITE AGGREGATE SPREADER
NEW 2013 MACK CXU613 PINNACLE
Cummins ISL-345HP, Fuller RTO11908LL, 20,000 front, Meritor 46,000 rears, Haulmax, double lockers Muticat MC15, “Super Shield, electric tarp, Only $174,500.00!!
Financing available with no payments for 4 months!
MP8-485 HP, RTLO16918B, 46,000 Meritor rears, double lockers, 22.5 rubber, 48” deluxe sleeper, aluminum cabguard, toolboxes, chain hangers
Only 320,000 kms!
MP8-505HP, Mack 12 speed M-Drive, Mack rears, double lockers, 70” deluxe double bunk, Webasco.
2012 TRUXPO show truck!
2008 MACK CXU613 TRACTOR
LANDOLL MODEL 930 AND 950 TRAVELLING TAIL, 30 TON TANDEM OR 50 TON TRIDEM, HYDRAULIC TAIL, WIRELESS REMOTE, 20K WINCH, RENTAL HOUSE SPECS
IN STOCK NOW!
NEW 2013 MACK GU713 CHASSIS MP8-505HP, RTLO18918B, 20,000 front axle, 256” WB, Meritor RT46-164EH, Hendrickson Primax, deluxe cab interior.
Excellent fuel truck with clear back of cab!
www.nanaimomack.com
STEVE VANYSSELDYK / PETER STRAKER 604-888-5522 / 1-800-663-4115
Page T-6
Your Truck & Trailer Connection, Since 1971
Continued from page T-4
automatic and automated manual transmissions being spec’d for mixer use,” Fennimore notes. “With the electronic controls on the newer automatics, the shifting is very smooth and responsive. They’re easier on drivers and reduce stress on the drivetrain, and the truck can keep up in traffic much easier.” Operators may also want to consider a transmission that can automatically select between econ-
omy and performance shift schedules based on the vehicle’s actual payload and its operating grade “The addition of Allison’s load-based shift scheduling (LBSS) can allow the mode button on the transmission’s shift selector to be programmed for controlling other vehicle functions, such as body builder functions or power takeoff (PTO) operation,” Fennimore says. “The economy mode is used when the truck travels on
level terrain with an empty or diminishing load. The performance mode is used when the vehicle is heavily loaded or on a grade.” Operators can choose LBSS on select Allison transmissions, such as the company’s 3000 and 4000 series. The Allison 3000 series is limited to a GVW of 60,000 pounds, and is available on the Kenworth T440 and W900S mixers only with the PACCAR PX-8 or Cummins ISL9 engines.
“99” trucK Parts & industrial equiPment established in 1961, “99” truck Parts & industrial equipment ltd., has been dedicated to helping out customers with all their truck & equipment part needs for over 50 years. we believe in offering consistent, exceptional customer service and we live by our motto, “Parts hard to find? we’ll find them for you.”
we are Your new & used sPecialists for: Transmission & Differential Exchanges & Parts • Lighting & Accessories Bearings, Seals, Clutches • Used Van Boxes All Makes (1 ton & up) • Service Shop
Allison • Eaton • Meritor • Spicer • Fuller • Clark Hurth • ZF Phone: 604-580-1677 toll free: 1-800-663-6460
12905 KING GEORGE BLVD, SURREY, BC parts@99truckparts.com
One additional Allison transmission gaining popularity in mixer applications is the 4700 RDS, which offers a 7.63 to 1 low first gear and optional second reverse. This helps give drivers extra control while pouring curb or backing down that steep incline to pour a footing. Another 4700 RDS feature is a converter lockup mode in first gear, which reduces excess heat being returned to the cooling system from a slipping torque converter without this feature. Front Engine or Rear Engine PTO The PTO must come directly from the engine in order to provide enough power for the mixer system. Whether you use front engine or a rear engine PTO depends on the chassis configuration. Fennimore recommends a rear engine PTO any time you can make it fit. But in those areas where the front pedestal must be mounted immediately back of cab, a front engine PTO is the only alternative. “A front-mounted PTO makes sense in provinces like Ontario, where the weight laws give you an incentive to get more load on the steer axle,” he says. The Kenworth T470 – with its full parent rails front frame configuration – is an excellent model for FEPTO applications. “With 2010 engines rejecting more heat, a larger radiator is needed to cool
LOCAL: (604) 888-5066 TOLL-FREE: 1 (800) 914-7819
January 2013 the same horsepower. In cases where high horsepower is required, both the Kenworth T800 FEPTO and the Kenworth C500 models offer great cooling capacity,” Fennimore says. “If you spec an automatic transmission, you’ll definitely want a rear-engine PTO because it will provide 30 percent higher output speed due to the gearing at the flywheel,” he says. “This allows much less slip in the torque converter when you are crawling along and want to keep the drum speed up to pour the concrete. Too much slip in the torque converter can lead to overheating the transmission or the engine’s cooling system.” For high PTO torque requirements, the PACCAR MX offers 612 lb-ft of output torque from the rear engine PTO. “Kenworth customers in Canada have been reporting that the Paccar MX with a REPTO has been a real winning combination for low fuel consumption, reliability and quiet operation,” Fennimore says. Location Issues Mixer specifications are also influenced by the type of delivery locations for the concrete. The heavier the load and the rougher the terrain, the more the chassis and suspension need to be beefed up. “If your mixer chassis needs to get into some pretty rough jobsites,” says Fennimore, “be sure to spec a suspension with a lot of articulation.” Good examples are the Chalmers 854 series and the Hendrickson HAULMAAX(R) tandem suspensions, which both offer good off-road articulation and durability. The frame rail specs are impacted by the type
of mixer barrel used. “If the barrel has a subframe welded to the chassis rails that is approved by the OEM, a single 11-5/8-inch frame is fine,” says Fennimore. “You’ll want bolted to the frame at back of the cab a transition plate, which goes as far forward as possible. This help ease stresses on the rails. “But if the mixer pedestals are mounted directly to the frame rails, you’ll need an inserted frame of at least 10-3/4 inches,” he says. “Remember, it’s not just strength you’re looking for, but stiffness, too. And, if you have more than one pusher axle, an inserted rail is recommended to help withstand the higher side loads.” Some of Kenworth’s mixer-specific options from the factory are fully huckbolted frames, factory installation of up to three pushers, and pre-punched holes in the frame rails to assist body builders with installation, among other options. Another thing to remember about the frame: mixer manufacturers often request crossmembers in specific locations. It’s a good idea to check with them before the truck is built. Kenworth offers a custom frame layout option that keep specific areas of the back of cab clear for customer-installed options. The type of construction sites typically visited by your mixers will affect the amount of traction required. “I always recommend side-to-side differential locks in both rear axles for traction off the pavement,” says Fennimore. “In areas with sandy soil, we’ve seen operators spec’ing a 6x4 configuraContinued on page T-7
t! e g r o F ’t Don FALCONEQUIP.COM
$16,000
1993 HIAB 160-4 - 2,116 LBS @ 39’8’’
$109,000
HENDERSON CHARGE SNOW & ICE PACKAGE
$134,000
2012 F/L M2-106 WITH HIAB 144E-5 CLX
The Next ine is l d a e D d A 2013 , 8 1 y r a Janu 5:00 pm
January 2013 Continued from page T-6
tion with active tire-pressure control systems (such as Eaton’s central tire inflation system or CTIS), which allow the driver to reduce tire pressure when off-road to obtain the needed traction in the sand.” The 2010-compliant emissions engines used in the U.S. mixer market typically use an engine-mounted air cleaner, which does not require a pre-cleaner. But in dusty conditions, a Filter Minder® air restriction gauge mounted on the air cleaner should be ordered and checked on a regular basis. Another option is to order the optional Filter Minder gauge in the dash to monitor the air cleaner performance from inside the cab. Kenworth is standard with a pop-up gauge on the air cleaner under the hood. Weight Watching Weight is an issue with mixers, but you have to save a lot to be able to haul an extra half yard of concrete, or about 2,000 pounds. The cost of lightweight components has to be considered. You can slim down by spec’ing components – such as wheels, air tanks, and clutch housings – in aluminum rather than steel. “Use the smallest fuel tank you can get away with,” Fennimore adds. “Most mixer applications burn about 4 to 4-1/2 gallons per hour. So, a 56- to 75-gallon tank is usually plenty of fuel for one shift.” Fennimore suggests engines such as the Cummins ISL9 to save up to 800 pounds compared with a 13-liter block in areas that do not require long runs away from the batch plant or have minimal steep grades. “With 350 horsepower and 1,250 lb-ft of torque, these 9-liter engines offer the power most operators will need.” Also,
We’re working on our next issue!
AD DEADLINE: January 18, 2013 5:00 pm
Your Truck & Trailer Connection, Since 1971 the ISL engines can be mated to the Allison 3000 series automatic transmissions, which will save an additional 250 pounds over the Allison 4000 series transmissions. One of the limitations of the 3000 series is reduced payload capacity of up to 62,000 pounds GVW in a mixer application. Another option for saving additional weight, though more expensive, is spec’ing disc brakes on the steer and drive axles. This option can reduce another 100-150 pounds off the chassis weight as well as dramatically reducing stopping distances and annual maintenance costs compared to drum brakes. Going with an in-cab battery box, which Kenworth offers, and a deleted passenger seat can eliminate between 90 and 150 pounds, depending on selecting either a 2- or 3-battery option. The 3-battery option is recommended in colder climates. Valuable pounds can also be saved in your suspension selection. “The difference can be as high as 400 pounds,” Fennimore says of the different suspension options. “You can leave shock absorbers off the rear because the weight of the mixer means you will never be running light.” Using wide-base “super single” tires instead of duals on the rear can save hundreds of pounds in wheel and tire weight. “The trade-off is that you get a narrower track if you stick with standard track axles,” he says. “You can go with a wider track axle, but then you may not have the option to go back to duals later because the dual configuration will now be over width.” Driver Performance Items With more trucking companies vying for good drivers, operators can’t afford to neglect driver comfort and driver performance-related items, Fennimore says. When it comes to visibility, Fennimore says try to spec as many windows as possible. “In addition to the standard Kenworth DayLite(R) doors, consider rear corner windows behind the doors,” he says. “It’s a good idea to mount the tailpipe behind the cab rather than at the side to keep out of the way of the corner windows.
“I suggest picking lowreplacement cost windshields when they’re available,” he adds. “Most mixer fleets replace at least one windshield side per truck per year. Two-piece flat-glass windshields with roped-in seals can be replaced in half an hour for a typical total cost of under a hundred dollars. This can save thousands of dollars over the life of the truck.” For a different look and more aerodynamics, select the two-piece curved glass option (one piece is also available). To make mixers with lift axles easier to drive, it’s smart to get a six-channel ABS system. “Lift axles, especially steerable ones, are normally over-braked for the load,” Fennimore says. “By including them in the ABS system, it’s much easier for the driver to avoid locking them up and flat spotting the tires.” The Bendix(R) ESP* (Electronic Stability Program) system is available with both the bridge formula mixer configuration and with the standard mixer bodies. To offer drivers the best turn performance and road feel, Fennimore recommends dual steering gears, rather than a large single steering gear with a steering assist ram. The dual system usually requires less maintenance than a single system with assist. Assist cylinders tend to be high maintenance and are typically more prone to leak or fail. Two additional driver performance items that Fennimore recommends are the Kenworth Extended Day Cab and Kenworth QuietCab(R) package. “The spacious Kenworth Extended Day Cab enhances driver comfort with an additional 6 inches of length and 5 inches of cab height compared to Kenworth’s traditional day cab. It also has 2 more inches behind the wheel, additional leg room, up to 21 degrees of driver’ seat recline, and 2 extra cubic feet of storage behind the driver’s seat,” he says. “The Kenworth QuietCab option helps to significantly reduce in-cab noise by two decibels, or by almost 50 percent, compared to Kenworth’s standard cab. These options may help to reduce driver fatigue, enhance productivity, and aid driver retention,” concludes Fennimore. b
Page T-7
Follow Us!
1946 Mills Road, Sidney, BC Office: 250-656-1689 | Fax: 250-656-1305
Unit #4, 2080 Carpenter St., Abbotsford, BC Phone: 604-853-4919 | Fax: 604-853-4915 NOW REPRESENTING ™
Used Units Available Now Mention r this ad fothis 15% OFFe! cran
2011 FORD 550 automatic transmission, TAM5 hooklift, 11,500 lbs capacity c/w 12’ container, 12’ rock box, 12’ custom flat deck, immaculate condition. HOOK-LIFT PACKAGE!
1997 HIAB 160-4 6,393 lbs @ 15'4"; 4,409 lbs @ 21'3"; 3,196 lbs @ 27'5"; 2,557 lbs @ 33'4"; 2,116 lbs @ 39'7". Price Attractive at $22,500.
NEW TOWING PACKAGE!
NEW 2012 Peterbilt Chassis, c/w NRC 20TB-26 20,000 LB capacity, 26’ deck, 10,000 lb. capacity Ramsey winch, wheel lift, removable side rails, roller guide for recovery, stabilizer grip, wireless remote control, 2 tool boxes.
“Attention Marine Industry” Already set up for your boat/dock install. Immaculate condition, 4 hydraulic extensions. Call for pricing.
20' in length. 14,000 lb. capacity. Electric/ hydraulic. Two to choose from… $5,000 each. WOW!
12,000 lb F/A, 40,000 lb R/A, Paccar PX8 330HP, Allison, 260" WB, dbl frame, 22' deck, ’08 HIAB 200C-5 Crane (rear mt), pintle hitch, low kms — a must see!
Cummins ISX, 18 spd RTO, Rockwell 46s w/ cross lockers, 4.30 ratio, Neway air ride, 20K F/A, 40K R/A, dual steer boxes, 235" WB, 17 ton National 600B crane, 56' reach (tractor mt).
Get Ready for Winter!
• V-Plows • Straight Plows • Hopper Spreaders
1-855-656-1689 Mike Shaw
Ray Shaw
Don Barclay
Dave MacLeod
Mark Salmon
Regional Sales Manager mike@pmindustries.ca C: 604-302-8001
Account Manager ray@pmindustries.ca C: 250-713-1768
Account Manager don@pmindustries.ca C: 250-812-4446
davempmindustries.ca @gmail.com C: 604-290-8164
Account Manager marksalmon.pm @gmail.com C: 250-889-1529
ABBOTSFORD SERVICE SHOP NOW OPEN | 604-853-4919
Page T-8
Your Truck & Trailer Connection, Since 1971
January 2013
TRUCKPOST Your Truck & Trailer Connection. Since 1971.
• 12 Issues per year • Truck Industry & Construction stories, News & Editorial • Truck & trailers For Sale • Driver Recruitment
• 23,000+ copies per month • 16,000 through the Supply Post network • 2,500 Direct Mail to top Trucking Companies • 4,500 Bulk Copies hand - delivered to Truckstops & Newsstand locations across Western Canada
“We’ve found the Truck Post to be a good, consistent way to market our trailers. The team there understands the industry well, and make advertising a breeze.”
Kelly Knight, Marketing Manager K-Line Trailers Ltd.
NEXT DEADLINE: Friday, January 18th for the February 2013 issue
Ad Contact | Jeff Watson Cell: 604-807-1254 E-Mail: jeff.watson@supplypost.com
Short Haul | Long Haul | Driver Recruitment | Trucks & Trailers For Sale 105 - 26730 56th Avenue, Langley, BC, Canada V4W 3X5
January 2013
Your Truck & Trailer Connection, Since 1971
Canada-US Safety Ratings: Reciprocity Cuts Both Ways The dictionary definition of reciprocity is the relation or policy in commercial dealings between countries by which corresponding advantages or privileges are granted by each country to the citizens of the other. In plain English, and in relation to Canada-US trucking, for example, what reciprocity usually means is that we’ll accept what you do if you’ll accept what we do. It does not mean that everything needs to be harmonized, but it infers that at the end of the day while rules and mechanisms may be different, final outcomes are more or less the same. Where this is so and where reciprocal agreements between Canada and the United States can be worked out, it is usually a good thing. But things don’t always work out as planned. Take Canada-US safety ratings reciprocity for example. Way back in 1994, Transport Canada and the USDOT signed a Memorandum of Understanding that each country would be responsible for monitoring a motor carrier’s compliance and safety performance in the carrier’s home jurisdic-
tion. The MOU also obliged both countries to endeavour to establish mutually compatible safety rating and audit programs. Fast forward to 2007 when an FMCSA “Canadian Issues” study concluded both countries share similar vision statements, missions and objectives to reduce truck collisions and recommended they work together to establish a safety ratings reciprocity agreement. Under the agreement a Canadian carrier who operates throughout Canada and the United States would have its safety performance activity (collisions, inspections and convictions) in both countries collected, calculated and monitored by its home province. Under that scenario, a carrier would no longer need both a provincial and an FMCSA profile, or be subject to both provincial and FMCSA compliance reviews. The administrative burden on both government and the industry would be reduced. Safety rating reciprocity was even identified as a deliverable under the Security and Prosperity Partnership initiative. Work continued and in 2008 the FMCSA and CC-
MTA agreed in principle to reciprocally recognize each other’s safety ratings. A bilateral working group on motor carrier data exchange – which is a key to the whole thing actually working -- was established. A number of provinces dropped the requirement for US carriers to register in their jurisdiction and stopped keeping profiles of those carriers. They did, however, begin sending the data on the US carriers’ safety performance in their provinces to the FMCSA. Information also started flowing the other way as the provinces began to receive data from FMCSA on the US performance of Canadian carriers and using that data to populate the provincial carrier profiles. But then the wheels started to come off. There were a number of technical issues that were difficult to resolve. Legal issues emerged which prevented FMCSA from using Canadian data to rate US carriers. But most important, it seems, was an apparent change of heart on the whole concept of reciprocity by the FMCSA which -- not incidentally -- coincided with the agency’s transition from Safestat to its Compliance, Safety, Accountability (CSA) program. CSA differs from the Canadian profile systems in some important
areas – e.g., pointing all violations from roadside inspections (not just out of service violations as is the case in Canada) on the carrier profile; and, not accounting for fault on the carrier’s collision profile. In the end, FMCSA would not give up its authority to monitor Canadian carriers and/or to conduct compliance reviews on Canadian soil. The Canadian provinces moved forward on safety ratings reciprocity in good faith. Anyone involved in the CCMTA process knows this. The provinces invested significant effort and resources in this process. While some may still cling to the hope that all is not lost and that an agreement can still be achieved, the reality is that the prospects for safety ratings reciprocity are
Page T-9 zilch. And, until that is acknowledged and resolved, an unleveled playing field exists between domestic and US carriers in eight of the ten provinces. Currently, four provinces are using US inspection and collision data in their carrier profiles -British Columbia, Alberta, Saskatchewan, and Manitoba. These provinces are (as they have done since 2007) still collecting and sending information on US carriers operating in their jurisdictions to FMCSA, even though FMCSA is not using the data to populate CSA profiles. Only two provinces (Ontario and Quebec) require US carriers to register to operate in their jurisdictions. As a result, no one is monitoring and creat-
ing a history on US carriers’ activities while they are operating in the other eight provinces. For CTA and the provincial associations this is not acceptable. With the failure to achieve a reciprocity agreement, US carriers should be required to register in all provinces they operate in, and all provinces should maintain carrier profiles of the US carriers that operate in their jurisdictions. Our motivation is nothing more than to address an inequity that has arisen as a result of the failure to achieve a reciprocal agreement on safety ratings. Reciprocity (and safety) now demands that US carriers be treated in Canada the same as Canadian carriers are treated in the United States. b
UNLOADS IN 4 MINUTES!
2013 IMCO “SMOOTHWALL” ALUMINUM WALKING FLOOR TRAILER.
“Finally a Smoothwall you can actually repair!” Bolted design won’t stress crack and you can replace a single panel. Super “B’s” available.
WE ALSO RENT WALKING FLOOR TRAILERS!
STOP STANDING AROUND!
High cube belt out trailer unloads in only 4 minutes!
WALKING FLOORS
careers
Available in TAC legal or longer beetle kill configurations. Built with the industry’s most durable, patented, “Core-lok” wall system. Finally a super “B” you can afford to pull.
PROFESSIONAL TRUCK DRIVER REQUIRED
USED RAGLAN SUPER “B” ALUMINUM DUMP TRAINS
Must have a clean Class 1, Fluid Handling & Off-Road Experience, and a positive attitude! Allen’s Transport will provide H2S, First Aid, and TDG to the ideal candidate. We are expanding and offer competitive wages, benefits, performance bonuses and well-maintained equipment.
Air ride, sliding bogie suspension on lead, roll over tarp systems, plastic lined. 100 cubic yard capacity.
RAIL CAR OPERATOR REQUIRED
Responsibilities include the safe and efficient loading/offloading of rail cars to trucks and completion of documentation. On call work is required. A certificate in TDG, WHMIS, First Aid, and H2S will be provided by Allen’s Transport Ltd. to the ideal candidate. Previous experience is an asset. We are expanding and will offer competitive wages, benefits, and performance bonuses. Come be a part of our winning team! Apply in person at Allen’s Transport Ltd. 7612 - 43rd Street, Leduc, AB or fax resume to 780-986-4618 Allen’s Transport has a Drug and Alcohol Policy in effect.
2008 TITAN 53’ WALKING FLOOR Air ride walking floor, roll tarp, barn doors, steel wheels, excellent condition. (Not exactly as shown).
34' HIGH CUBE Steel push out trailer. Tridem air ride, hydraulic flip tarps, hydraulic top hinged door, new ram and fresh paint.
Page T-10
Your Truck & Trailer Connection, Since 1971
Mack Supports Disaster Relief In New York City Mack Trucks recently presented a $25,000 check to New York City Commissioner of Sanitation John J. Doherty, to support relief efforts following Hurricane Sandy. The donation will go to the Mayor’s Fund to Advance New York City, a not-for-profit organization dedicated to community and economic improvement, and will be used to meet immediate needs for food, water and supplies, as well as long-term relief and restoration projects. “New York City has long been an important refuse and heavy-duty truck customer for Mack Trucks,” said Kevin Flaherty, president of Mack Trucks North American Sales and Marketing. “We value our relationship with New York, and we want to assist them as they deal with enormous demand for public services in the
aftermath of Hurricane Sandy.” Mack’s relationship with New York City stretches back more than 100 years to 1900 when the Mack brothers incorporated the company and began manufacturing their first heavy-duty vehicle, a 20-passenger touring bus aptly named the “Manhattan,” in a Brooklyn factory. New York City was a customer of Mack Trucks as early as 1911, and the New York Departments of Sanitation and Transportation together have more than 6,000 MACK vehicles currently in service. “On behalf of Mayor Bloomberg, I would like to thank Mack Trucks for their very generous donation to New York City’s Hurricane Sandy relief efforts,” Doherty said. “Our city was hit hard by the super storm and its incredible
surge. Entire communities were devastated. Lives were lost. And many New Yorkers face years of rebuilding. But our DSNY workers were out citywide, many of them in Mack trucks, helping families recover and hauling more than 338,000 tons of storm debris to date. We really appreciate Mack’s continued support.” As one of the most damaging storms ever to hit the northeastern U.S., Hurricane Sandy caused public and private losses of approximately $15 billion that will not be covered by private insurance, according to reports from New York City. “New York is very important to our company and vital to the economic health of the entire nation,” Flaherty said. “For more than100 years, our trucks have been helping to build our country, and its Mack’s privilege to continue that tradition and support one of America’s greatest cities as they put the damage created by Sandy behind them.” b
Western Star & Sterling Trucks of Vancouver “The Snow’s About To Fly!”
January 2013
Delphi Demo’s Latest Safety Connectors At Airbag 2012 Delphi Automotive (NYSE: DLPH) showcased its portfolio of connector technologies that enable occupant safety systems at the upcoming Airbag 2012, International Symposium & Exhibition on Sophisticated Car Occupant Safety Systems, on December 3-5 at the Karlsruhe Congress Center. Delphi displayed the latest technology focused on connecting safety restraint systems (SRS), including sealed squib connectors for pedestrian safety systems. With its recent acquisition of the FCI Group’s Motorized Vehicles Division, Delphi is the world leader for connecting wiring systems to airbags and other pyrotechnic devices used in vehicles and has the broadest range of SRS connectors available on the market. Additionally, the company offers vehicle manufacturers the flexibility to meet specific configurations, from connector pigtails to jumper harnesses, as well as global engineering, manufacturing capability and product expertise. “Airbags have become standard equipment on passenger vehicles and can meanwhile have more than 10 applications in a car and each of them
needs a specialized electrical architecture in order to keep the occupants safe,” said Liam Butterworth, President, Delphi Connection Systems. “Delphi is a key innovator in developing these mission critical safety components due to its engineering competency and has a global footprint to service the local market needs.” First commercially available range of sealed squib connectors for a new generation of pedestrian safety systems In 2009, pedestrian safety became an integral part of the Euro NCAP rating scheme for new vehicles. As a result, a new generation of SRS systems is emerging, located beyond the vehicle cockpit. Such applications demand connectors that can reliably deliver, while withstanding extremes of temperature, humidity, vibration and the potential ingress of moisture and dust. With a history of developing innovative connectors, Delphi has successfully introduced the first commercially available range of sealed squib connectors designed for use in challenging environments, such as pedestrian safety and battery cut-off systems within engine compartments. Delphi’s
sealed squib connectors are particularly suited to a range of pedestrian safety systems currently being developed and implemented by major OEMs. These include ‘hood lift’ applications, which are used in vehicles where hard structures such as the engine block are located in close proximity to the hood. In the event of pedestrian collision, the use of pyrotechnic devices on both sides of the hood allows a softer impact zone to be created, minimizing the risk of serious injury. Delphi has also created the scoop-proof AK-2 standard, and the world’s first squib connector with an integrated grounding element, the AK-2+ ElectroStatic Discharge (ESD) squib. Besides enhancing reliability and cutting assembly costs, the AK-2+ ESD squib eliminates potential misfiring caused by electro static discharge with completely integrated grounding, thus allowing safe traceability of grounding. These sealed squib connectors offer the high standards of performance, durability and efficiency that have made Delphi a global leader in SRS interconnection. Delphi is also a market leader in occupant sensing with over 10 years of proven field reliability. Delphi’s occupant safety systems portfolio includes a wide range of occupant classification sensor systems which help reduce the potential for airbag induced injury. b
Direct To U
WHOLESALE
250.561.0100 ASK FOR DOUG OR JOHN
western star 4700 snow Plow unit Get ready with this 2013 Western Star 4700 Snow Plow. Reliable Detroit DD13 power, 470hp 1650 lb ft torque, Eaton RTLO-16918B Transmission. Rigged by Falcon Equipment with box, belly plow, and front plow. Call Western Star & Sterling Trucks of Vancouver, 604-882-0902, for more details and price.
www.wsstvan.com · 604-882-0902
douglasfstanley@gmail.com
NEW & USED HEAVY DUTY TRUCK & TRAILERS PARTS PARTING OUT HEAVY DUTY TRUCKS AND TRAILERS. GOOD ASSORTMENT OF NEW PARTS ON ORDER. EXCELLENT LOCATER SYSTEM IN PLACE.
Proud Distributor for
Expander® America is ISO 9001-2008 Registered
10 Year Warranty Eliminate welding/line boring, shorten down time! A quick, cost effective and permanent solution to pivot wear! Advanced locking mechanism that stabilizes the machine! 9136 Milwaukee Way, Prince George, BC V2N 5T3
www.expanderamericas.com | www.dtuindustrial.ca
January 2013
Your Truck & Trailer Connection, Since 1971
Improvements Begin At Windsor-Detroit Tunnel The Governments of Canada and Ontario recently announced the start of construction for upgrades to the WindsorDetroit Tunnel Canadian Plaza. This project will create approximately
150 jobs in the region and improve capacity for growth in vehicle traffic and cross-border trade through the Windsor-Detroit corridor. “These upgrades are part of our strategy to en-
Ford Begins Production Of New Kuga Ford recently began volume production of the allnew Ford Kuga SUV at its assembly plant in Valencia, Spain, with deliveries to dealerships across Europe to follow soon. New Kuga offers segment-first technology including hands-free tailgate; class-leading handling with Ford’s new global intelligent all-wheel drive system and enhanced Torque Vectoring Control; and introduces Ford EcoBoost petrol engine technology to the European SUV market.
We’re working on our next issue!
AD DEADLINE: January 18, 2013 5:00 pm
Ford has sold more than 300,000 Kugas since launching the first generation model in Europe in 2008. New Kuga heralds the start of Ford’s delivery of a comprehensive SUV lineup in Europe. It will be followed by the arrival of the modern and innovative EcoSport, Ford’s entry into the small SUV segment, and the Edge – a larger, more premium crossover that is a success in North America and other markets. “The first-generation Kuga was a successful vehicle that customers really loved. The all-new, second-generation Kuga is a smarter, more fuel-efficient and even more fun to drive SUV,” said Roelant de Waard, vice president, Marketing, Sales & Service, Ford of Europe. “Ford has a deep heritage and expertise in SUVs that we plan to fully leverage in Europe starting with the all-new Kuga.” Ford plans to leverage its historic leadership in SUVs in North America and other regions around the world to quickly expand its lineup in Europe; and has said it expects to sell more than one million SUVs in Europe in the next six years with
#26 19695 - 96th Ave, Langley, BC
• ENGINE REPAIRS • BRAKES MONDAY to FRIDAY 7:00am to Midnight
• SAFETY INSPECTIONS • FLEET MAINTENANCE SATURDAY 8:00am to 8:30pm
604-888-3838
sure that modern and efficient infrastructure is in place at Windsor-Detroit – Canada’s most important trade corridor,” said Diane Finley, Minister of Human Resources and Skills Development, who SUVs accounting for 10 per cent of all Fords sold in the region by 2016. New Kuga offers a choice of 150 PS and 180 PS 1.6-litre EcoBoost petrol engines, and 140 PS and 163 PS 2.0-litre TDCi Duratorq diesel engines. AWD models are available with Ford’s PowerShift transmission; and all engine variants achieve CO2 emissions of less than 180 g/km*. A range of driver assistance technologies including the parallel parking aid Active Park Assist, and sensor-based Blind Spot Information System, which indicates with a warning light in the door mirror that a potential hazard is in the driver’s blind spot, will also be available. The all-new Kuga features 82-litres more bootspace than the current model, while the rear seats fold flat at the touch of a button. The smart Kuga AWD system pre-emptively reassesses conditions 20 times faster than it takes to blink an eye, readjusting the AWD power split to give the driver the best blend of handling and traction. Dynamics and cornering control are improved by the introduction of the Torque Vectoring Control system first found on the new Focus. Ford’s advanced voice control, device integration and connectivity interface, SYNC, also will be available from launch. It will include Emergency Assistance, which upon detecting airbag deployment or activation of the emergency fuel shut-off within the car, uses the on board GPS locator and Bluetoothpaired device to set up an emergency call and provide GPS co-ordinates, in the local language, for the emergency response. b
made the announcement on behalf of Denis Lebel, Minister of Transport, Infrastructure and Communities. “Tunnel plaza improvements will create jobs and economic growth and complement the construction of a new Windsor-Detroit Bridge, a top infrastructure priority for the Harper government.” “These infrastructure projects are creating jobs now and building our economy for the future,” added Dwight Duncan, Ontario Minister of Finance and Member of Provincial Parliament (MPP) for Windsor-Tecumseh. “Ontario’s significant investments in our border crossings are allowing people and goods to move between Ontario and Michigan more quickly, saving both time and money and encouraging economic growth.” The project will address traffic congestion and improve operations at the plaza. Upgrades include new vehicle access lanes, new buildings for the Canada Border Services Agency and tunnel maintenance, new integrated primary inspection (IPIL) lanes for trucks, as
Page T-11 well as a reconfiguration of the duty-free parking area, municipal parking lots and existing intersections. “Border infrastructure improvements facilitate trade and the efficient movement of goods and services between Canada and the United States,” said Dave Van Kesteren, Member of Parliament for Chatham-Kent—Essex. “Strategic infrastructure investments like this are part of our plan to create jobs, economic growth and long-term prosperity for the people of Windsor and Essex County.” “This project will be constructed by a local company, creating local jobs here in Windsor-Essex,” said Teresa Piruzza, MPP for Windsor West. “These improvements will also help our downtown core businesses by reducing congestion on local streets and improving access to their locations.” “I want to thank the Government of Canada and the Province of Ontario for following through on their commitment to improve the infrastructure at the Windsor-Detroit Tunnel,” said Eddie
Francis, Mayor of Windsor. “These upgrades will serve to alleviate congestion on city streets and improve efficiency at one of Canada’s most important economic gateways.” Coco Paving (1990) Inc., the successful bidder on the $16.6-million contract, will begin Stage 1 work with sewer and water main installation, demolition of parking areas, and installation of temporary traffic signals. Traffic on local streets will be maintained throughout the Stage 1 work with tunnel traffic accessing the plaza as usual. This work is expected to take approximately two construction seasons to complete. This project is jointly funded by the Governments of Canada and Ontario under the Let’s Get Windsor-Essex Moving (LGWEM) strategy, a $300-million commitment for several transportation infrastructure projects to improve efficiency and reduce congestion in WindsorEssex. Funding for this strategy comes from the Canada-Ontario Border Infrastructure Fund. b
We have developed a new, quality service to meet your Social Media initiatives.
Social Media Setup Package We will set you up on the most relevant social media centres on the web, including Google Business Pages, Facebook Business Pages, Twitter and Blog.
Social Media Management Package This package includes a custom article blog post per week, status reports on accounts, and management of comments received through the social media platforms.
Newsletter Package The best way to keep in touch with clients and build an email database of potential clients. This package includes creation of a newsletter up to four pages in length and updating it on a monthly basis.
www.transrep.ca • info@transrep.ca • Tel: 905-541-3319 • Fax: 905-765-1444 172 Argyle St. North, Upper level • Caledonia ON N3W 1J7
TRUCKPOST PHOTO Take a picture of your Truck
Visit www.truckpost.ca
Click on Submit Truck or Trailer Ad to upload your info
Questions? Call 1-800-663-4802
ADS FIND MORE TRUCKS ON-LINE AT
WWW.TRUCKPOST.CA
It ’s that easy !
PAGE T-12 · JANUARY 2013
WWW.TRUCKPOST.CA
2013 KENWORTH T800
2004 STERLING
$119,000
2008 PETERBILT
$59,000
Overstocked on new 2013 Kenworth T800s. Cummins ISX15, 18 spd, 14.6K front axle, S40s rear axle, 38" sleeper, drop axle. Available with drop axle removed, s/n 958187. $119,000.
2004 Sterling, 422,000 kms, 18 spd, aluminum transfer box, 450 Mercedes engine, well maintained. $59,000.
GREATWEST KENWORTH
CALL
Call Danny 403-478-0357 or 1-888-253-7555 WESTERN STAR 4800SB DUMP TRUCK
Western Star 4800SB Dump Truck, DD13 power, 450 hp, 1,650 lb ft, 18 speed, 20K front, 46K rear, with towing provision for pony.
WESTERN STAR & STERLING TRUCKS 604-882-0902
2007 FREIGHTLINER M2 106
2005 INTERNATIONAL 9400
$32,000 2008 Peterbilt Tri Drive, 162 km, 5,200 hrs, 2 years warranty, lift on engine good and new tires, 550, 15X Cummins with 2006 23.5 ton Terex 92' & 26' jib. All has been well maintained & cleaned. Just certified June 25, 2012. Call for price.
2005 International 9400, clean highway tractor with 51" hi-rise sleeper, 500 hp Cummins, 18 speed, 46,000 rears, double lockers, s/n 211839, 862,450 km.. $32,000.
250-318-3185
250-765-5555 or 1-800-665-4990
INTERIOR BOOM TRUCK
604-240-0119 2011 PETERBILT 348
2011 Peterbilt 348, Paccar PX-8 300 hp, Allison 300, 20 & 40s, 256" WB, c/w 20' deck, Elliott 1870F 18 ton crane, 70' reach.
ARW TRUCKS
CALL CALVIN 1-888-843-6111 2012 F-550 XL 4X4 PLOW TRUCK
TRAIL KING NEW 2013 TRI AXLE TRAILERS
JAMES WESTERN STAR
2007 INTERNATIONAL 4300
P.O.R. Tilt deck and beavertail style. ABS brakes, LED lights, low pro tires. #1 in quality and engineering, designed for your heavy loads, tandem and tridem. Call for further info on stock and orders.
TRANS PACIFIC TRAILER 250-868-2178
18' Reefer Van (Stock number 12-138), DT 466 210 HP, Allison Auto. w/OD & econ feature, hyd. brakes, 160,482 mi, 18' x 96" w x 87" h, Thermo King TS200 with 10,147 hrs, cruise, A/C, 3 person cab, CD Player, dual 50 gal fuel tanks, breakaway mirrors, 2 rows of E track, B.C Cert.
RIGHT TRUCKS 604-584-9555
2012 GM 3500 SERVICELL
2012 CHEVY 3500 16' CUBE VAN
$26,500. 24' Van Body (Stock # 12-120), CAT C7 7.2L 191 HP, Auto, Hyd brakes, 179,665 miles, 24' x 102" wide x 97" high Van Body, pwr windows & locks, CD player, ABS, 3 person cab, High back pump action driver seat, 2 - 40 gal fuel tanks, 2 rows E Track, Translucent Roof, side door. $26,500.
S/S 9' dump body, 24" alum. back pack with S/S doors, Cirus “Black-Tip” dual joystick controller for hoist & plow functions, E-Z Spread 3 chan elect. spreader controller, Compact tank/valve encl., 4 yard3 Swenson 9' MDV S/S sander, Arctic 9' hyd. plow with galvanized frame.
2012 GM 3500 Servicell, gas, single rear wheel, fiberglass body, 6 compartments, horizontal compartment accessible from inside, translucent ceiling, rear barn doors, ladder rack with removable rear access ladder, tow hitch, walk-thru door.
2012 Chevy 3500 16 ft Cube Van, dual rear wheel, 79 in inside height, aluminum walk ramp,translucent ceiling, 3/8" plywood lining with 2 rows of tie bars, walk through door.
604-584-9555
604-941-6241 or cdowall@delequipment.com
604-941-6241 or cdowall@delequipment.com
604-941-6241 or cdowall@delequipment.com
RIGHT TRUCKS
DEL EQUIPMENT
DEL EQUIPMENT
DEL EQUIPMENT
January 2013 2012 international 4300 m7 lp crew cab
Your Truck 1971 2002 international 5500i& Trailer Connection, usedSince 2004 international 5500i
Page T-13 used 2008 international 7400
$59,500
$72,500
$52,500
2012 INTERNATIONAL 4300 M7 LP Crew Cab, 300 HP MAXXForce 7, Allison 2200 RDS Transmission, 8,000 Fronts, 17,500 Rears. Great RV Hauler. P.O.R.
2002 INTERNATIONAL 5500I Vocational Level, 455 HP Caterpillar C-15, Fuller RTLO-(F) 18918B transmission, 20,000 lb front axle, Meritor RT-46-164EH rear axle. 856, 175 km. $59,500.
Used 2004 INTERNATIONAL 5500i 6X4 Eagle Level, 450HP CUM ISX-450, 20,000 lb front axle, 46,000 lb rear axle, Fuller RTLO(F)-16918B transmission, , 709,799 km. $72,500.
Used 2008 INTERNATIONAL 7400 4X2. 300HP International MaxxForce DT, Fuller FR-9210B 10-Speed Man transmission, 14,000 fronts, 21,000 rears, 253,000 km. $52,500.
irl international
irl international
irl international
irl international
Vernon: 250-545-2381 · Kamloops: 250-372-1445 used 2012 international terrastar sfa 4x2
Vernon: 250-545-2381 · Kamloops: 250-372-1445 used 2007 international 9200i sba 6x4
$68,500
Vernon: 250-545-2381 · Kamloops: 250-372-1445 new 2011 international prostar
$33,000
Vernon: 250-545-2381 · Kamloops: 250-372-1445 new 2012 international prostar
$117,200
P.O.R.
Used 2012 INTERNATIONAL TERRASTAR SFA 4X2 -CAB Extended Conventional. 300HP MAXXForce 7, Allison 1000_RDS transmission, 6,000 fronts, 11,000 rears. $68,500.
Used 2007 INTERNATIONAL 9200i SBA 6X4 -Premium Level. 425 HP Cummins ISM 410, 16913A transmission, 12,000 fronts, Meritor RT-40-145P rears, 611,163 km. $33,000.
New 2011 INTERNATIONAL PROSTAR + 122 6X4 EAGLE 73 SKY-RISE. 475HP MaxxForce 13, RTLOF 18918 B transmission, 12,350 fronts, 40,000 rears. $117,200.
New 2012 INTERNATIONAL PROSTAR+ 122 6x4 ProStar+ Eagle. 475HP MaxxForce 13, 12,000 fronts, 40,000 rears. P.O.R.
irl international
irl international
irl international
irl international
Vernon: 250-545-2381 · Kamloops: 250-372-1445 new 2013 international 5900i sba
Vernon: 250-545-2381 · Kamloops: 250-372-1445 new 2013 international 5900i sba
P.O.R.
Vernon: 250-545-2381 · Kamloops: 250-372-1445 new 2013 international 5900i sba
P.O.R.
Vernon: 250-545-2381 · Kamloops: 250-372-1445 new 2013 international 5900i sba
P.O.R.
P.O.R.
New 2013 INTERNATIONAL 5900i SBA 124 6X4 -Eagle Level. 500HP MaxxForce, OF-18918B transmission, 20,000 fronts, 46,000 rears. P.O.R.
New 2013 INTERNATIONAL 5900i SBA 124 6X4 -Eagle Level. 550HP MAXXFORCE 15, RTLOF-18918B transmission, 20,000 fronts, 46,000 rears. P.O.R.
New 2013 INTERNATIONAL 5900i SBA 124 6X4 -CAB INTERIOR TRIM Eagle Level. 500HP MaxxForce 15, RTLO(F) -18918B transmission, 13,200 fronts, Meritor RT-46-164P rear. P.O.R.
New 2013 INTERNATIONAL 5900I SBA 6X4 EAGLE LEVEL. 500HP MAXXFORCE 15, RTLOF18918B transmission, 20,000 fronts, 46,000 rears. P.O.R.
irl international
irl international
irl international
irl international
Vernon: 250-545-2381 · Kamloops: 250-372-1445 2012 F-550 XLT
Vernon: 250-545-2381 · Kamloops: 250-372-1445 2012 Mitsubishi fuso fe-180
Vernon: 250-545-2381 · Kamloops: 250-372-1445 2012 GM 3500 srw
Vernon: 250-545-2381 · Kamloops: 250-372-1445 2012 gmc 3500
2012 F-550 XLT, 6.7L Diesel, 4X4, 11ft Mechanics Aluminum service body, VMAC VR 70 Air compressor, Autocrane 5005EH, Sliding telescopic roof.
2012 Mitsubishi Fuso FE-180, diesel 4P10(T5) dual overhead cam engine, automatic transimission, 4x2 SL-145 Swaploader, 12ft long x 4ft high wall bin.
2012 GM 3500 SRW, gas, 2 wheel drive, 12ft long Unicell CW (City Wide) body. Payload of up to 3,500lbs and a capacity of up to 500 cubic feet!
2012 GMC 3500, Single rear wheel, gas, 2 wheel drive, Unicell Aerocell SRW.
del equipment
del equipment
del equipment
del equipment
604-941-6241 or cdowall@delequipment.com
604-941-6241 or kklein@delequipment.com
604-941-6241 or cdowall@delequipment.com
604-941-6241 or cdowall@delequipment.com
Page T-14
Your Truck & Trailer Connection, Since 1971
2013 manac scraP steel/demolition end dumP
2013 MANAC GALVANIZED 53' TRIDEM DROPDECK
January 2013
in stocK 2013 cross countrY tridem tilt
2005 western star 4900fa
P.o.r. 2013 Manac Scrap Steel/Demolition End Dump, Hendrickson HT300 Tridem air ride, 25,000 lb axles, 11R24.5, AR450 Hardox, 87 cubic yard, swing tailgate, call for further information.
manac western
IN STOCK NOW: 2013 Manac Galvanized 53' Tridem Dropdeck, no more rusting issues, Hendrickson tridem, manual dump valve with pressure gauge, Holland Mark V landing gear, Continental 255/70R22.5 on steel unimount, Apitong deck, 3 bar winches, call for details.
IN STOCK: 2013 Cross Country Tridem Tilt, Tridem, air tilt, air ramps, fir floor, toolbox, two speed landing gear, adjustable pintle hitch, 235/75R17.5 radials, call for further information.
2005 Western Star 4900FA, S60 515, 13 spd, 40 diffs, 76" Ultra high roof sleeper, 1,401,467 kms. P.o.r.
604-888-4188
manac western 604-888-4188
western star & sterlinG trucKs
manac western
604-888-4188
2009 sterlinG daY cab at9500
2011 ford f-550
P.o.r.
NEW 2013 MACK TD714 TITAN TRI-DRIVE LOGGER
2011 Ford F-550, automatic transmission, TAM5 hooklift, 11,500 lbs capacity, c/w 12' container, 12' rock box, 12' custom flat deck, immaculate condition. P.o.r.
western star & sterlinG trucKs
Pm industries
call miKe 604-302-8001
GM Leads In Energy Reduction Challenge General Motors now has 54 facilities meeting a voluntary energy reduction challenge set by the U.S. Environmental Protection Agency – more than any company worldwide. GM saves $90 million in energy costs as a result. To meet the ENERGY STAR Challenge for Industry, U.S. EPA standards require facilities to reduce energy intensity by 10 percent within five years. GM’s 54 facilities cut energy intensity by an average of 26 percent within just two to three years. The resulting CO2 equivalent reduction of 1,256,000 metric tons is equal to the electricity needed to power more than 142,069 homes annually or provide electricity to a city about the size of New Orleans for one year. New to the list are 22 GM International Operations sites, as well as two
facilities in North America. These join the 30 GM plants that met the Challenge last year. To achieve the Challenge, GM employed tactics such as benchmarking energy use, upgrading to energy-efficient lighting, improving control of ventilation systems and automating the shut-down process of equipment that previously was shut down manually as well as process energy reductions. “Energy efficiency reduces our emissions and improves our bottom line, so we are driven to make improvements wherever we can,” said Mike Robinson, GM vice president of sustainability and global regulatory affairs. “The EPA was right to recognize our global employees who work diligently to come up with new energy-saving ideas and implement efficiency measures every day. Their commitment
is helping leave a smaller carbon footprint.” GM’s commitment to energy efficiency is ongoing. In 2012, the agency named GM one of its ENERGY STAR Partners of the Year for energy management and the Lansing Customer Care and Aftersales parts distribution center earned ENERGY STAR building certification for performing in the top 25th percentile of similar facilities nationwide. Additionally, the GM Lansing Delta Township plant, which earned ENERGY STAR plant certification for superior energy efficiency last year, has retained its certification for 2012. “Improving the energy efficiency of our nation’s industrial facilities is critical to protecting our environment,” said Jean Lupinacci, chief of the ENERGY STAR Commercial & Industrial Branch. “From the plant floor to the boardroom, organizations like GM are leading the way by making their facilities more efficient.” b
Your ad could be here...
$99 per truck ad
P.o.r.
2009 Sterling Day Cab AT9500, DD15 455, 18 spd, Super 40 diffs, day cab sleeper, 414,550 km. P.o.r.
604-882-0902
604-882-0902
New 2013 Mack TD714 Titan Tri-Drive Logger - MP10-605 HP, Fuller RTLO20918B, 20,000 front, 69,000 lbs Primax, 4:10 ratio, deluxe cab, Artic truck rigging and trailer, unbelievable power, reliability and price!
nanaimo macK
1-866-758-0185 · brian: 250-616-1233 brianb@nanaimomack.com
• Full colour photo ad of your new or used truck. • Exposure to 13,000+ Supply Post Readers, and 12,000+ Online Visitors. • Only $99 to advertise! (per individual unit). • 45 words max.
call suPPlY Post todaY! 1-800-663-4802
Freightliner Launches Cascadia 113 NGV Demonstrator Program Recently, at the American Trucking Associations’ Summit on Natural Gas in Trucking, Freightliner Trucks announced that it is now offering a customer demonstrator program for its all new Freightliner Cascadia 113 natural gas day cab. Five customer demonstrator tractors will be available in the United States and Canada to provide customers direct experience with Freightliner’s newest alternative fuel product. Equipped with the new Cummins Westport ISX12 G heavy-duty natural gas engine, the Allison 4000HS transmission, and 115 diesel gallon equivalent compressed natural gas (CNG) fuel tanks, the Cascadia 113 natural gas tractor is ideal for regional haul and less-than-truckload applications. The 12-liter ISX12 G natural gas engine is
based on the Cummins ISX12 diesel heavy duty engine platform and will operate on either CNG or liquefied natural gas (LNG). It features ratings of 400 hp and 1,450 lb-ft torque, optional engine brake, and manual and automatic transmission capability. “Natural gas products can result in significant fuel cost savings, making it a smart choice for increasing profitability while benefitting the environment,” said TJ Reed, director, product strategy for Freightliner Trucks. “By providing our customers with the opportunity to test drive a Cascadia 113 natural gas, they’ll experience first-hand the performance and efficiency of an alternative fuel solution.” The tractor is just one of Freightliner Trucks’ natural gas-powered vehicles, which also in-
cludes the Freightliner Business Class M2 112 and the 114SD. Parent company Daimler Trucks North America (DTNA) leads the medium and heavy commercial vehicle market in the production of natural gas powered conventional vehicles with a combined sales figure of more than 4,600 natural gas vehicles across its brands. Of those, Freightliner Trucks has sold more than 1,800 trucks and tractors since 2008. DTNA’s commitment to green technologies is part of parent company Daimler AG’s global “Shaping Future Transportation” initiative. Launched in 2007, the initiative is focused on reducing criteria pollutants, carbon dioxide and fuel consumption through the utilization of clean, efficient drive systems and alternative fuels. Full production on the Cascadia 113 natural gas begins in Q3 2013. To learn more about this demonstrator program, go to www. FreightlinerTrucks.com. b
January 2013
Your Truck & Trailer Connection, Since 1971
Bendix Drives 92 Percent Waste Diversion Bendix Commercial Vehicle Systems LLC, the North American leader in the development and manufacture of leading-edge active safety and braking system technologies, has achieved a 92 percent waste diversion rate through its ongoing company-wide emphasis on recycling and remanufacturing. With America Recycles Day serving as a reminder of the importance of reducing the environmental im-
pact of its facilities, Bendix continues to work toward its goal of “zero waste to landfill” operations. America Recycles Day is held every Nov. 15 by the nonprofit Keep America Beautiful organization to promote and celebrate recycling in the United States. “Less than one-twelfth of our waste now goes to landfills, and Bendix is pleased with the progress we’ve made in recent years toward reducing that frac-
Redi Milk Sees The Future With Allison Automatic Transmissions Redi Milk, which operates a fleet of medium-duty distribution trucks of various brands, has changed its vehicle purchasing policy as a result of the success of adding a new UD MK11 automatic. Until the Allison equipped UD was added to the Redi Milk fleet, the company had operated mostly manual and AMT equipped trucks. According to Redi Milk’s fleet manager, Nigel Anson, dependence on automatic trucks is inevitable for food transport and distribution industries, due
to constant stop-start duty cycles and increasing traffic congestion. “We purchased the UD MK11 automatic because it seemed the perfect truck for our operations, since drivers are stopping and starting all the time, delivering to numerous retail outlets,” Anson said. “Automatics are the way of the future, and really, the only choice was to move with the times or get stuck in the past.” “The Allison automatic eliminates clutch wear, reduces the need for gearbox
Hendrickson’s New “Parts Look Up System” Hendrickson is proud to introduce PLUS, “Parts Look Up System.” Hendrickson’s new PLUS is designed to provide the fleet,
repair center, or distributor with serviceable parts information for Hendrickson Truck and Trailer suspension systems.
www.prhdtruck.com • Prince George, BC
USED HEAVY DUTY TRUCK PARTS! Engines • Transmissions • Rear Drives Freightliner • Kenworth • Peterbilt • Western Star
CALL US TODAY! 1-800-661-9511
tion to zero,” said Maria Gutierrez, Bendix health, safety, and environmental manager. “We feel we are very close to that goal. Every day, we strive to be environmentally conscious in our management decisions and business strategy. This makes sense for Bendix, because it’s the right thing to do and also has a positive financial impact. Just as important, it makes sense for the communities in which overhauls and drastically reduces maintenance costs and brake wear,” said Anson. “It also contributes to better safety by lowering levels of driver fatigue. An automatic transmission allows drivers to concentrate on negotiating traffic or maneuvering the truck and not having to worry about clutch control and gear selection. Put simply, it allows the driver to focus on controlling the truck,” he said. According to Anson, drivers love it because it is so easy to operate and manoeuver, particularly in frequent stop-start conditions and increasingly busy Melbourne roads. “Our drivers visit up to 50 customers per day and are behind the wheel for This system will recognize truck suspension assembly numbers, trailer suspension model numbers, trailer suspension serial numbers and display parts or kits available for purchase through your local OEM dealer or distributor. PLUS also offers a cross reference tool for truck suspension part numbers to assist in servicing your Hendrickson suspension. “PLUS provides us a platform to build from as we continue to provide innovative tools to help our valued Hendrickson suspension system users, distributors, and service providers with all of their serviceable parts and cross reference needs,” states David McCleave, director of sales and marketing for Hendrickson Truck Commercial Vehicle Systems. b
Page T-15
we operate and for the collective stewardship of the planet we share.” All Bendix plants have instituted recycling of waste such as paper, cardboard, wood, plastic, and metal. In 2011, the company diverted more than 5,400 tons of waste and recycled more than 5,200 tons of material. This year, Bendix has diverted 92 percent of its waste that once would have gone into landfills. In recent years, Bendix has also strengthened its remanufacturing efforts, launching a business unit focused on the practice in 2011, and expanding it in 2012 with serial production of remanufactured brake shoes at its new Bendix Brake Shoe Remanufactur-
ing Center in Huntington, Ind. With more than 35 years’ experience in remanufacturing compressors, air dryers, valves, and more, Bendix has long recognized the environmental benefits of recycling these parts. Bendix reduces its environmental impact by dismantling products after their initial use, salvaging key components, and reassembling them with salvaged and new components to meet current specifications. This efficient form of recycling reduces the carbon footprint associated with the fabrication of new parts by 80 percent. In 2011, Bendix remanufactured 300,000 units, recovering more than 70 per-
cent of the material in the original parts, and diverting more than 4,200 tons of material from landfills. The company has found other recycling channels as well: Bendix sends discarded dessicant from its recycled air dryers to a company that reclaims the waste material for use in producing cement. “Everyone is familiar with the practice of collecting bottles, cans, and newspapers for recycling,” Gutierrez said. “Seeking new and innovative ways to reuse materials is a key part of Bendix’s long-term sustainability strategy, and we hope that our practices can serve as examples of change that can be adopted across our industry and across the globe.” b
six to eight hours per shift, which equates to more than 1000 gear changes a day. Of course, in an automatic all of those shifts are managed by the transmission,” he added. “The automatic is more nimble, has better acceleration in city traffic and is more efficient and easier to use than manual trucks.” “When you take into
account all the factors including the fatigue reduction, lower maintenance and better efficiencies, automatics are ideal for our needs, and all new trucks we buy in the future will be automatics,” concluded Nigel. The 250 horsepower UD MK 11 Redi Milk purchased has now covered around 15,000km and in that time
has completely convinced Anson of its value. UD offers its range of MK and PK medium duty trucks with Allison 2500 Series fully automatic transmissions as a factoryfitted option in Australia, which over the past five years has proved popular across a range of vocations and industries. b
Page T-16
Your Truck & Trailer Connection, Since 1971
January 2013
PUGET SOUND TRUCK SALES 253-863-7646
MATIC AUTO ISSION SM TRAN
2008 KENWORTH T300, PX8-330 hp, jakes, Automatic trans, 52K# gvwr, Locker differential, 4 spring susp, 21’ flatbed, Rail lift tailgate, 55K ACTUAL MILES
4X4
1999 PETERBILT 357, ISM 305hp, 9 speed, 55,000# gvwr, Chalmers Suspension, continuous chain rolloff, 60K# rated, 22’ rails, Rolloff rebuilt 10/11 KS
2006 Ford F550 4x4. Powerstroke diesel, automatic, 17,950# gvwr, LOW MILES!! Other flatbeds available
4X4
2000 Intl S2574, ISM-288hp, jakes, 4x4, 13 speed, Locker diff, dbl frame, tow package, 5 yard dump, LOW MILES- EX GOVT unit banner- HEAVY SPEC 4x4
IGGER
D TRACK
2 ½” X 14’ Kelly Bar Pressure Digger with sliding base, pole setter, & takeup winch on 1983 Case 1150, 6 cyl diesel, 6 way 10.5’ blade, LOW HOURS!
VATOR OXCA
HYDR
2005 Intl 7400, DT570-285hp, Auto, Heavy spec, LOADED, Vactor 2110 hydroexcavator, JD diesel aux, single stage fan, dual water pumps, remote control boom, 16K miles,EX GOVT unit!!
1999 INTL 2674, M11-330hp, Jakes, Auto trans, 58K# gvwr, walking beams, LOCKER diffs, double steel frame, hotshift pto ONLY 3 LEFT- 2002 KENWORTH T800, C15-475hp, retarder, 10spd, 14,600 ft, 46K# rear, drop axle, locker diffs, Wet kit, EX GOVT units
MATIC
TRUC
FUEL
AUTO
ANE
1992 GMC Topkick, Cat 3126, automatic trans, 13K# max rated knucklecrane, 31’ side reach, winch package, service body, under 100K.
K
DERRIC
1994 Freightliner FL80, 5.9L-230hp turbo diesel, Auto trans, Terex 92-47 digger derrick, 35,200# gvwr, 47’ sheave height, 21,440# capacity, pole claws, line body, capstan drive/ winch, EX GOVT unit
DDER
T RO
BO JE
COM
1999 Intl S2574, M11-370, jakes, auto trans, heavy spec, Vactor 2110 PD unit, 1,500 gallon water, 80 gpm @ 2500psi, Loaded with options, ONLY 26K miles!!
4X4 SE
1989 INTL 4900, DT466-250hp, auto, 56K# gvwr, Cascon fuel lube system, 1,800gal fuel, 200 gal fuel tank, 190 gal waste, (4) 105 gal & (1) 80 & (1) 58 gal tanks, solvent tank, hyd. Compressor
KLECR
DIGGER
RVICE
AUTO
1992 INTL 4800 4x4, diesel, automatic, dual cmpt &fuel system, & (3) 4x2 with single compt, pump, meter & hose reel,Stainless steel tanks, EX GOVT low mileage units.
KNUC
IT
WET K
SPEC HEAVY ATIC M AUTO
FF
ROLLO
1997 White WG64, M11-310 hp, Jakes, Allison automatic trans, 56K# gvwr, 16K# front, 40K# rear, walking beams, double frame, 15’dump body, EX utility company unit
RUCK
INCH T
6X6 W
1985 Mack RM6886s 6x6, ECS 350, engine brake, 15 speed, 2 spd t/c, Gearmatic winch, 1100’ of 3/4” cable, 11020# rated, flatbed, LOW MILES
RUCK
RT WATE
1992 FORD L9000 N14-330 hp, 10 speed deep reduction,18K#, 40K# rear, walking beams, 4000 gallon water system with Aux. powered pump, LOW MILES
TRUCK
2006 FORD F550 4x4, Powerstroke, auto, 2,200# crane, air compressor, Miller welder, (3) lube tanks, grease keg, waste oil system, LOW Miles! Several other 2WD and 4WD Service Trucks available.
6X6
(2) 2004 FREIGHTLINER FL112 6x6, C12- 380hp, 18 spd, Heavy Specs, Lockers, Chalmer susp, AC, 11 yard dump, HI Lift gate, EX Utility Co Trucks VERY LOW MILES HT. RKING 75' WO
(1) 2008 INTERNATIONAL 7400, Maxxforce 300hp, Allison automatic, 56K# gvwr, Walking beams, Terex RM70 aerial manlift, insulated upper and lower, 2 man tub bucket with hyd. Rotation, EX Govt unit withunder 6K actual miles!!-
ER LOAD SELF
1991 INTERNATIONAL S2674, L10-260hp, Allison automatic, 57K# gvwr, 2 spd no spin diffs, Olympic self loader crane - 14 ton capacity @ 8’, 25’ max side reach, With 1974 Peerless tandem axle bunk trailer. EX CITY UNIT WITH LOW MILES!
NIT
ERY U
DELIV
2006 Sterling, C13-430hp, jakes, 10spd, Lockers, air ride, 261K miles, 2007 Traileze 48’ x 102”, hyd. Front ramp, winch, Double drop, Load gauge, air ride- NICE PACKAGE!!
Web: www.pugetsoundtrucksales.com E-mail: kenwilliamspsts@comcast.net or cme4bigrigs@yahoo.com
NOBODY BEATS OUR QUALITY! NOBODY!
Toll 572-7045 TollFree: Free: (888) 1-866-953-5800 www.quereltrailers.com www.quereltrailers.com www.supplypost.com/querel www.truckpaper.com/querel
1585 Rd, Winnipeg, Winnipeg, MB R2J 1585 Niakwa Niakwa Rd, MB R2J 3T33T3
We have many neW & used trailers in stock & on order - Please call for Pricing call Bruce Querel & richard WieBe
neW for 2013 - canuck tandem or triaXle lead side dumPs $70,000
NEW 2013 CANUCK QUAD WAGON R20 - 3/16” Hardox 450 LIGHtESt WAGON ON tHE MARKEt!
$59,500 ea.
NEW 2013 CANUCK END DUMP R20 - 3/16” Hardox 450, air ride, disc brakes, alum wheels, electric tarp
$49,500 ea.
(2) NEW USED2013 2010 CANUCK END DUMP R12 - AR200, 60” spread, air ride, asphalt overhang, electric tarp IN StOCK!
NEW 2013 CANUCK END DUMP R12 - 3/16” Hardox 450, 60” spread, air ride, asphalt overhang, electric tarp
$58,500
NEW 2013 CANUCK END DUMP R20 - 3/16” Hardox 450, 60” spread, air ride, asphalt overhang, electric tarp 2 IN StOCK!
NEW 2013 CANUCK END DUMP R3 - AR200, tub, 60” spread, air ride, asphalt overhang, electric tarp Hardox 450 also available.
NEW 2013 CANUCK END DUMP R3 - 3/16” Hardox 450, air ride, high lift air tailgate
NEW 2013 CANUCK END DUMP R3 - 3/16” Hardox 450, gravel trailer, 1 air lift, electric tarp
NEW 2013 CANUCK END DUMP R3 - 3/16” Hardox 450, asphalt overhang, air ride, electric tarp
NEW 2013 CANUCK END DUMP R20 - 3/16” Hardox 450, air ride, flip tarp, high lift air tailgate
NEW 2013 CANUCK END DUMP R20 - 1/4” Hardox 450, quarter frame, air ride, electric tarp
NEW 2013 HMI SIDE DUMP AR 400 or Hardox 450, air ride, electric tarp PLACE YOUR ORDERS!
NEW 2013 CANUCK DUMP BOX 14’, 15’, 16’, 3/16” Hardox 450, high lift air tailgate
NEW 2013 CANUCK DUMP BOX 14’, 15’, 16’, 3/16” Hardox 450
Year End Blowout $46,500 NEW 2013 NORtH COUNtRY CLAM GAtE BELLY DUMP 60” spread, air ride PLACE YOUR ORDERS!
NEW 2013 NORtH COUNtRY BELLY DUMP C.U.L. air ride, 60” spread 13 ON ORDER - 1 LEft!