Rolling bearing test Bearing and lubricant study under a wide range of working conditions
Areas of study Lubricant (oil or grease) selection for a specific rolling bearing type and application Validation of new lubricant formulations Comparation of a wide range of rolling bearings performance for a specific application Assessment of different steels and heat treatments for rolling bearings Assessment of coatings (PVD, Black Oxide, etc.) and surface treatments (texturing, surface finishes, etc.) for rolling bearings under different working conditions Assessment of rolling bearing performance under harsh working conditions
Testing capacities Vibration, friction and temperature analysis on rolling bearings and lubricants Study of fatigue lifetime, wear and premature failures in bearings FE8 lubricant testing according to DIN 51819-1/2/3 standard Development of ad hoc testing protocols for specific purposes
Rolling bearing test
Tekniker
Singular Equipment
Roltek test bench AXIAL LOAD
Rolling bearing test bench with combined load application system (axial and radial) and high frequency data acquisition (HF).
Technical characteristics Maximum load: 110kN Maximum speed: 4000 rpm Maximum diameter (outer ring): 130 mm Temperature range: room temperature – 200°C Lubrication: oil recirculation, bath lubrication and grease Sensors: Oil and rolling bearing temperature Vibrations (dB) Load Friction torque evolution
Roltek Plus test bench
AXIAL AND RADIAL LOAD (HF) Technical characteristics Maximum load: 160kN Maximum speed: 8000 rpm Maximum diameter (outer ring): 130 mm Temperature: room temperature – 200 °C Lubrication: oil recirculation, bath lubrication and grease Sensors: Oil and rolling bearing temperature Vibrations (HF) Axial and radial load Friction torque evolution
Sectors
Contact Fernando López fernando.lopez@tekniker.es
Aeronautics and space
Automotive
Renewable energy
Railway
The science industry
Machine tools and manufacturing
Raquel Bayón raquel.bayon@tekniker.es
tekniker.es