Decoupling Progress Profiles holds the key PRODESO HEAT GRIP XL SYSTEM is the revolutionary electrical heating system for floors and coverings that provides warmth only where desired in few minutes; it’s a cost effective, time and energy saving solution.
The polypropylene membrane, with uncoupling, waterproofing
Moreover, the rounded square shaped reliefs are provided with
and vapour management features, has an 8 mm thickness and
truncated almost square based pyramid cavities that transfer
is provided with a non-woven thermowelded polypropylene
the loads from flooring to the support. The reliefs are designed
fabric on the back side.
to easily hold the Prodeso Heat Grip Cable only where required.
The new membrane’s design suits to any floor or existing
The heating cable, with its new 6.5 mm diameter, is provided
surface, optimizing its performances; its new structure allows
with many electrical resistors connected in parallel.
L AY I N G T E C H N O L O G I E S
a perfect fixing of the heating cable and a crack-bridging ability
In case of cable damage, only the involved resistor stops, not
five-times more than the previous systems.
interrupting the heating transmission of the entire system.
86 T I L E I N T E R N AT I O N A L 4 / 2 0 2 0
