70 Series Combines Cab and Controls
70 Series Combines Cab and Controls
The CommandCenter puts you in charge
Ever had to watch the rows in front of you and a grain cart beside you, all while trying to make adjustments to critical settings like fan speed, threshing speed, or chaffer opening? Then you’ll appreciate the value of having set point adjustment, standard on every 70 Series STS Combine.
You and your operators spend too much time in the driver’s seat to be burdened with inconvenient controls, inaccurate adjustments, and uncomfortable operation. The versatile CommandCenter armrest display in the 70 Series cabs puts vital machine and crop information within easy reach, making it simple to make quick adjustments to critical controls.
The idea is simple. Instead of holding down a button or turning a knob until your desired setting is reached, you simply use the selector wheel to dial in the proper setting on the CommandCenter display. That’s all. The machine then makes the adjustment, and lets you know when the desired set point is reached. Set point adjustable variables include: deck plate spacing, header height control sensitivity, header raise and lower rate, HydraFlex pressure, draper belt speed, feederhouse backshaft speed, threshing speed and clearance, sieve opening, chaffer opening, fan speed, spreader speed (including PowerCast), and CommandTouch feederhouse speed.
The handy cornerpost monitors show you everything you need to know about your combine’s performance in one glance. They’re located in your line of sight so you won’t need to turn your head from your work.
Fine-tune your combine with comfort and ease:
The CommandCenter puts control at your fingertips. From one panel, you get quick access to: – – – – – – – –
– Ergonomic shape with adjustable 3-position hand rest – Hydrostatic ground speed and direction
Combine setup Remote shoe adjust and automatic combine adjust Harvest Monitor Harvest Smart automatic feedrate control Warning alarms Calibration “wizards” On-board diagnostics Set-point adjust
– Quick-stop button allows disengaging header and unloading auger drive/swing in one convenient motion – Reel height (feederhouse speed) with fore/aft remote reel control switch – Two-speed header raise/lower with optional Contour-Master™ control switch – Three-position header height resume, reel resume, and Corn Head Deck Plate resume system activation switches – Five-position unloading auger swing and unloading auger engage controls
In addition to the CommandCenter display, we’ve also located controls for lights, wipers, radio, cab climate, and mirrors on the overhead console…out of the way, but always within reach.
22
23
92289_42972_Combine2009CS3.indd Sec1:22 C
M
Y
K
8/6/09 4:09:02 PM
92289_42972_Combine2009CS3.indd Sec1:23
8/3/09 2:27:19 PM
