Group test continued from page 22.... found we had to turn the machine round a full 180 degrees. At the rear you will find four USB 3.0 ports (all charging), mini DisplayPort and HDMi. With such a slimline chassis, there is no Ethernet port but a USB to Ethernet adapter comes in the box. Performance is excellent. Having a full 0.2GHz over the M3800 (0.4GHz in Turbo) it has a clear lead in our multi-threaded, CPU intensive 3ds Max benchmark and is only a whisker behind the MSI WS60. With the same Quadro K1100M GPU as
the M3800 the performance increase is far less pronounced in our Creo and SolidWorks graphics tests. Fans kicked in significantly under load, making a fair bit of noise. They also ran slowly in the background when idle but this was less noticeable than with the MSI WS60. We actually experienced a few issues in our SolidWorks test with PhotoView 360 crashing regularly. It should be emphasised again that this was a pre-production unit and software issues like these are likely to be ironed out with the shipping
machine and during CAD certification. Performance could also change slightly. Overall, the OMEN Pro is an excellent addition to HP’s workstation portfolio — a beautifully styled, slimline laptop that delivers performance to rival most standard 15-inch mobile workstations. There are some compromises, of course. Battery life is not great and some may find the storage too limiting and rear ports annoying but, apart from these minor gripes, the OMEN looks to be a very impressive machine for mobile CAD/BIM and entry-level design visualisation.
External storage for mobile workstations Mainstream 15-inch mobile workstations can typically hold up to three internal drives but their slimline siblings are limited to one or two. This increases the importance of external storage for storing huge CAD datasets. When you are talking about Gigabytes of data performance is important. No one likes waiting, particularly when rushing out of the door and late for an appointment. Mechanical Hard Disk Drives (HDDs) with spinning disks used to be the only serious technology for storing CAD data but with capacities increasing and prices dropping Solid State Drive (SSD) technology is now becoming an attractive alternative — not only because of the superior performance but built-in protection against accidental drops. Most drives are USB 3.0 but with Thunderbolt 2 now being introduced in some machines (e.g. Dell Precision M3800) this could change over time. We tested four different portable storage options, all of which can be powered by the USB or Thunderbolt bus. Our initial testing was simple: the time taken to transfer 7GB (13,500 files) of CAD data to and from the drive. We then did a parallel copy test where we transferred three sets of data in quick succession so all three were being copied at the same time. If, like me, you often grab datasets from different folders as and when you find them, this can be a real bottleneck with mechanical drives.
Akitio Palm Raid (512GB) 1 £436 (scan.co.uk) 1 year warranty This high-speed Thunderbolt drive features two mSATA SSDs combined in software RAID 0 (where two drives become one to boost performance). For those that prefer to protect against data loss, it can also be formatted in RAID 1 (mirrored) so your data should stay safe even if one drive fails. The drive is primarily designed for Mac OSX so needs reformatting for Windows. This proved to be easier said than done as some partitions were locked (needed both DISKPART and Disk Management tools). Once up and running it was the fastest drive on test, taking just 40 seconds to read the CAD dataset and 36 secs to write. However, rather surprisingly, it slowed down in our parallel test completing it in 137 secs (read) and 133 secs (write). With a high-quality aluminium case, built in cable, carry case and high-speed transfer, the premium grade pocket size drive is no doubt an attractive package. However, at over £1 per GB the price is high and despite it winning our standard copy test by some margin, with performance dropping under parallel copy you need to carefully consider the way you work to choose it over the Samsung T1.
Samsung’s USB 3.0 T1 SSD fits easily within a pocket. The performance of the drive is also excellent, taking 48 secs to read and 55 secs to write our CAD dataset. It also performed exceedingly well in our parallel test completing the copy in 100 secs (read and write), quicker than it would have taken to copy all three in sequence. Overall, it is a hugely impressive drive and comes highly recommended. At £0.36 per GB it is significantly more expensive than a mechanical drive, but for the performance it offers in a compact footprint it cannot be beaten. The Samsung T1 SSD is also available in 250GB and 1TB capacities. SSD 850 EVO M.2 (500GB) 3 £144 (scan.co.uk) 3 year warranty + Startech M.2 Enclosure £17 (uk.insight.com)
This DIY solution houses a SATA-based Samsung M.2 (2280) SSD in a metal Startech caddy. Installation takes a few minutes and, hey presto, you have a highly portable SSD, not much bigger than a USB stick. Performance is slightly below that of the Samsung T1 (sequential — 51 secs read, 58 secs write) (parallel — 118 secs read, 120 secs write). At £161 it is the cheapest of all the SSDs and offers flexibility, should you wish to install the M.2 (2280) SSD in a laptop or desktop, but other than that we would find it hard to recommend over the Samsung T1 SSD. Seagate Backup Plus Slim 4 (2TB) £62.50 (amazon.co.uk) 2 year warranty This slimline traditional mechanical drive is only 12mm thick. It is housed in a solid metal case which comes in blue red, silver or black.
1
For sequential read and write, performance is pretty good. Read speeds, in particular were only 1.5 times slower than the Samsung T1 SSD, completing in 72 secs (124 secs write). The limitations of mechanical drive technology were exposed in our multiple copy test, as the drive slowed right down when transferring three separate datasets in parallel (525 secs). This is likely to slow down as data gets scattered over different parts of the disk (as the drive head has to move further). However, a managed approach to file copy (dataset by dataset, rather than throwing everything at it at once) will help ease this bottleneck. At 1.6 pence per GB, the Seagate Backup Plus Slim wins hands down on cost. And it also cannot be beaten on capacity — 2TB makes it incredibly attractive to those with swelling datasets.
4
iPhone 5S for scale
2 3
Samsung T1 (500GB) 2 £180 (scan.co.uk) 3 year warranty Smaller than a business card and only 9mm thick
www.AECmag.com
p12_13_15_17_18_21_22_25_Mobile workstations.indd 25
May / June 2015
25
13/05/2015 16:55
