Ruei Wong Master Student Major in ID Taipei,Taiwan
CONTENTS PRODUCT DESIGN PROJECT GRAB THE SKILLS
3-17
19-23
CONTENTS 1
2
PRODUCT DESIGN PROJECTS
PRODUCT DESIGN PROJECT 3
PRODUCT DESIGN PROJECT
4
PRODUCT DESIGN PROJECT
Project A
小品杉好 - 點心月亮 Product type / tablewares Year / 2018 Co-designer / Tien-li Chen, Po-hsun Lai, Xiang-yun Chen Exhibited at Taipei Botanical Garden from 2018-6-1 to 7-15 Project B
小品杉好 - 相思杉姍 Product type / stationery Year / 2018 Co-designer / Tien-li Chen, Po-hsun Lai, Xiang-yun Chen Exhibited at Taipei Botanical Garden from 2018-6-1 to 7-15 In this work and the next one we used a special wood, Taiwania. Taiwania, called "wa driwru ki Dramare Ka angatu" by Rukia, which means "the Tree that hits the moon" and represents its towering and straight image. In addition, it has colorful wood grain, numerous knot, clearly differentiated between sapwood and heartwood. Because of outstanding uniqueness, we treat Taiwania as a treasure of Taiwan in our works. 5
PRODUCT DESIGN PROJECT
Project A
Inlaid Taiwania in Acacia, just like the moon hanged up on the sky, trough this way, the unique beauty appears particularly prominent.
The Plates are designed to put snacks such as cakes, chips, sushi and so on. The plates are three in a set and can be stacked or placed in different way. In addition, the beauty of Taiwania can make food look more delicious. People can have a visual feast while enjoying the food. 6
PRODUCT DESIGN PROJECT
Project B
Under the calm and steady Acacia packaging, the exposed Taiwania's grain appears particularly dazzling. If take in every detail of the stacked boxes' wood grain, you will find that it is like the cross-section of the Taiwania. Moreover, the joints of the box are are "Comb-shaped Mortise", leaving the special code.
The boxes can not only contain stationery, but can be assembled into a set of flower arrangements as decorations on the table. 7
PRODUCT DESIGN PROJECT
來！作伙收 A Helper for Recycler Product type / work aids Year / 2017 Co-designer / Yunyan Zong, Pinchien Huang, Ssuyun Huang For more information on the project, please go to page 23 to link the videos!
The rhythm rises, the battle starts. Residents crowding in front of the recycling truck to get rid of their garbage. The recyclers bend down to take uncountable bags of garbage, standing beside them in the narrow space of the truck. Sweat dripping down, they move to the next stop perpetually. They’re fighting against not only the time, but also the harsh working environment. Being designers, as well as parts of the residents, it’s our turn to make a change. 8
PRODUCT DESIGN PROJECT
Design Prospect This project is for helping the recyclers decrease the times of some repetitious movements and simplify the workflow to avoid the danger and burden while working, making a better workspace.
Design Process Objective | We choose East District of Tainan City as the target to do our researches, trying to improve the recyclers’ working environments and decrease occupational injury and risk under the current recycling regulations and limits of the recycling truck's structure. Insight | After visiting the recyclers and observing how they work, we found out that they have to stand nearly five hours, repeating bending and twisting their waists while taking the garbage,which will cause a long-term occupational injury. Even worse, cramped space, limited time, and being hit by the garbage thrown by residents, such things would not merely bring physical damages, but lead to stress and negative emotions.
9
PRODUCT DESIGN PROJECT Analysis | In order to reduce recyclers loading and danger, we analyzed the researches and organized to know more about their work.
410 210 45 70
40
110 Unit-cm
Average Size of Recycling Trucks
glass
styrofoam
bulb/lamp
other recycling
Categories of Recycling Materials
備
拿
破
分
堆
卸
Drop or broken Due to time constraints, the recyclers randomly piled up recyclables. Waist Burden 1.Anxious 2.Waiting people 3.Height drop of car 4.Time constraints
Unbalanced It is not easy to maintain balance because the recyclers have to work with Two hands and stand on one foot from time to time.
Danger in Current Working Flow
Design Features Concept | We hope that this project can change the working environment of recyclers and people’s recycling habits, creating a friendly, interactive mode for both sides under the current recycling regulations and equipments. 10
PRODUCT DESIGN PROJECT
Diversion
Protection
Quick Installation
Effort-saving to unload
Four Cores | In the working environment with this product, recyclers can reach things at an arm's distance - with a body support at bottom, as well as less angle to turn their bodies as they throw the recycling. Moreover, with four major specialities - Diversion, Protection, Quick Installation, and effort-saving to unload , we create a friendly working space for recyclers.
Recycling Area | Based on the space of current recycling trucks. Considering of the main working area of recyclers, the space reserved for the large amount of the piling-up recycling materials, and the order when unloading the materials in the recycling station, we set our product at the back of the truck. <Mix-Area> People put mix-recycling on the platform, so the recyclers don't have to fetch each bag of garbage from people in hurry, and it also makes this action easier. In addition, there is a support holding the weight of the recycling stuffs which makes the job much safer.
<Glass-Area> The glass recycling is done by people by leaving them in the small bag at temporary zone, and then redistributing by the recyclers from the small bag to the big bag according to the condition. The glass bag is designed L-shaped. It saves lots of strength by landing with this L's bottom during dumping.
<Styrofoam-Area> Classified by the people. It is attached to the glass shelf, recyclers can open the bag with the Glass-Area. The bag has a corresponding color block with the bracket to facilitate and install.
<Blub & Lamp-Area> Divided into lamps and bulbs, sorted by people, inside the bag there's a buffering mechanism to protect the lights from breaking. Both share the same Each Recycling Area
way to install and unloaded. 11
PRODUCT DESIGN PROJECT
辦桌 Band Oh! Product type / kitchen equipment Year / 2016 Co-designer / Ssuyun Huang, Peifuu Shih The most important thing in the kitchen is not kitchenware, but people. Take the rented kitchen for 3-5 people co-cooking as our design scope, we devote to creating kitchen space that brings people happiness. 12
PRODUCT DESIGN PROJECT
Concept | The main appeal is to several person complete the work togather with pleasure. As a result, compared to the perfect equipment, we pay more attention to the way strengthening the connection between people. Design Points | In order to promote the communication and connection between people, we adopt centripetal planning and integrate the working area with the rest and dining area of the kitchen. The most important thing in the kitchen is not kitchenware, but people.
13
PRODUCT DESIGN PROJECT
ĺž&#x2026; Expectation Product type / Lamp
Year / 2015
Expect people to stay there for a moment; temporarily escape from the busy life. The shape of the lamp is taken from the image of street lamp, giving people familiar feelings. Furthermore, the curved neck creates an image that it's trying to dialogue with people. 14
PRODUCT DESIGN PROJECT
This lamp consists of four parts, and it can random assemble and adjusted according to personal preferences and different situations.
15
PRODUCT DESIGN PROJECT
OTHER PROJECTS In addition to the aforementioned works, there are other types of product design experience such as design of time, structure, cleaner, papper furniture and so on. 16
PRODUCT DESIGN PROJECT
咕嚕 Year / 2014 Product type / time series
Goggles joints Year / 2015 Product type / structure design
Flosspick Year / 2017 Product type / tooth cleaner
玄 Year / 2015 Product type / hallstand
17
18
GRAB THE SKILLS
GRAB THE SKILLS 19
GRAB THE SKILLS
Impression Performance Photoshop
Trying to show the miniatures of society in daily life and depict various people into the picture.
Hollow Glass Conventional Art
The summer, I contacted the master 劉瑞典 in Hsinchu, and started my learning journey in the conventional art, hollow glass. 20
GRAB THE SKILLS
21
GRAB THE SKILLS
Film Editing Premiere
The first contact with film editing was to increase the communication of the work. Then I found that I always get a lot of fun in the processs editing, therefore I still keep learning until today. Most of my film work is related to my design output. 22
GRAB THE SKILLS
清潔員任務體驗 來！做伙收 Year / 2017
產品規劃與介紹 來！做伙收 Year / 2017
宣傳行銷 敲敲 Ciao Year / 2015
產品介紹 聞雨 Year / 2015
Scan QR codes to take a look at the videos! 23
Ruei Wong Taipei,Taiwan +886 928924553 my0414@gmail.com
Master Student(2017- ), Master Program of Innovation and Design, National Taipei University of Technology,NTUT Bachelor(2013-2017), Department of Industrial Design, National Cheng Kung University,NCKU
Year of creation 2018 24
ruei wong