LNG-500 Catalog
LNG
& Natural Gas Equipment
TM
Foreword This catalog briefly describes the RegO® LNG Equipment available from RegO® as a result of condensing information in this catalog, some highly technical and special application material has been omitted. Proper application, installation and maintenance of the product is essential. Buyers should obtain further information if there are any doubts or questions. All information contained in this catalog is subject to change by RegO® without notice. Additional product information is available from RegO® or authorized product distributors. Illustrations and drawings of individual products are representative of “product groups” and all products within a product group are similar in construction.
Warning Never use any product on oxygen service if another gas has been previously used on the product. All RegO® Products are mechanical devices that will eventually become inoperative due to wear, corrosion and aging of components made of materials such as flouropolymers. The environment and conditions of use will determine the safe service life of these products. Periodic inspection and maintenance are essential to avoid serious injury and property damage. Many RegO® products are manufactured for storage, transport, transfer and use of toxic flammable and dangerous liquids and gases. Such substances should be handled by experienced and trained personnel only, using accepted governmental and industrial safety procedures.
Materials RegO® Products may make suggestions for a material to use with a specific media. These suggestions will be based on technical compatibility resources through associations and manufacturers. RegO® does not guarantee the material to be compatible with the specific media – this is the responsibility of the user. Users must test under their own operating conditions to determine the suitability of any material in a particular application.
Notice Installation, usage and maintenance of all RegO® Products must be in compliance with all RegO® instructions as well as requirements and provisions of NFPA 57, NFPA 30A, NFPA 59A, CGA, ASME, DOT, ANSI and all applicable federal, state, provincial and local standards, codes, regulations and laws. Inspection and maintenance on a periodic basis is essential and should be performed only by qualified personnel. Be sure all instructions are read and understood before installation, operation and service.
ii TM
Table of Contents ECL22........................... 4 ECL70........................... 4 ECL140......................... 4 ECR140 ........................ 4 ECL325......................... 4 DR6108 ...................... 12 DR6112....................... 12 DR6113....................... 12 DA6206....................... 13 DA6208....................... 13 ES8452 ...................... 3 TES8452....................... 2 ES8453 ....................... 3 TES8453....................... 2 ES8454 ....................... 3 TES8454....................... 2 TES8464....................... 2 BK9452 ....................... 3 T9452 ...................... 2 BK9453 ....................... 3 T9453 ...................... 2 BK9454 ....................... 3 T9454 ...................... 2 PRV19432 .................... 22 PRV19433 .................... 22 PRV19434 .................... 22 PRV29432 .................... 22 PRV29433 .................... 22 PRV29434 .................... 22 GS-00110W-12F ........... 21 GS-00110W-12F3 ......... 21 GS-00110W-12S3 ........ 21 GS-00110W-12S3 ........ 21 GS-00110W-12WA ....... 21 GS-00110W-16F ........... 21 GS-00110W-16F3 ......... 21 GS-00110W-16S .......... 21 GS-00110W-16W3A ..... 21 GS-00110W-16W3A ..... 21 GS-00110W-16W3J ...... 21 GS-00110W-16W3J ...... 21 GS-00110W-24F ........... 21 GS-00110W-24F3 ......... 21 GS-00110W-24W3A ..... 21 GS-00110W-24W3A ..... 21 GS-00110W-24W3J ...... 21 GS-00110W-24W3J ...... 21 GS-00110W-32F ........... 21 GS-00110W-32F3 ......... 21 GS-00110W-32W3A ..... 21 GS-00110W-32W3A ..... 21 GS-00110W-32W3J ...... 21 GS-00110W-32W3J ...... 21 GS-00110W-48F ........... 21 GS-00110W-48F3 ......... 21 GS-00110W-48W3A ..... 21
GS-00110W-48W3J ...... 21 GS-00110W-48WA ....... 21 GS-00110W-48WJ ........ 21 GS-00110W-4S3 .......... 21 GS-00110W-4S3 .......... 21 GS-00110W-4T ............. 21 GS-00110W-4WA ......... 21 GS-00110W-6S3 .......... 21 GS-00110W-6S3 .......... 21 GS-00110W-6WA ......... 21 GS-00110W-8F ............. 21 GS-00110W-8S3 .......... 21 GS-00110W-8S3 .......... 21 GS-110W-8T ................. 21 GS-00110W-8WA ......... 21 RG125A ..................... 4 BR1784-7SKA ........... 7 BR1784-7SKB ........... 7 BR1784-7SKC ........... 7 BR1784-7SKD ........... 7 BR1784-80 ................ 7 1784A ................... 5 BR1784A ................... 8 1784B ................... 5 BR1784B ................... 8 1784C ................... 5 BR1784C ................... 8 1784D ................... 5 BR1784D ................... 8 BR1784ST ................. 7 BR1786-7SKA ........... 7 BR1786-7SKB ........... 7 BR1786-7SKC ........... 7 BR1786-7SKD ........... 7 BR1786-80 ................ 7 BR1786-80 ................ 7 1786A ................... 5 BR1786A ................... 8 1786B ................... 5 BR1786B ................... 8 1786C ................... 5 BR1786C ................... 8 1786D ................... 5 BR1786D ................... 8 BR1786ST ................. 7 BR1786ST ................. 7 BR1788-7SKA ........... 7 BR1788-7SKB ........... 7 BR1788-7SKC ........... 7 BR1788-7SKD ........... 7 1788A ................... 5 BR1788A ................... 8 1788B ................... 5 BR1788B ................... 8 1788C ................... 5 BR1788C ................... 8
1788D ................... 5 BR1788D ................... 8 GS00210W-24F......... 15 GS00210W-24W3A ... 15 GS00210W-24W3J.... 15 GS00210W-32F......... 15 GS00210W-32W3A ... 15 GS00210W-32W3J.... 15 RG022A ..................... 4 CFM00002D ................ 16 RG300A ..................... 4 B-000322-12S4 ....... 19 B-000322-16S4 ....... 19 B-000322-20S4 ....... 19 B-000322-20T4........ 19 B-000322-24S4 ....... 19 B-000322-24T4........ 19 B-000322-4S4 ......... 19 B-000322-6S4 ......... 19 B-000322-8S4 ......... 19 B-000326-12T6........ 19 B-000326-16T6........ 19 B-000326-4T6.......... 19 B-000326-6T6.......... 19 B-000326-8T6.......... 19 AR4106A.................... 11 AR4108A.................... 11 AR4112A.................... 11 AFM00004D................. 16 CFM00004D ................ 16 PFM00004D ................ 16 SFM00004D ................ 16 CFM00004E ................ 16 B-000840-xxS .......... 23 B-000840-xxT .......... 23 ES8450R .................. 2 B-00846M-xxS6 ....... 23 B-00846M-xxT6 ....... 23 S-0886GF-xxS ......... 23 S-886MGF-XXW3A . 23 S-00886M-xxS ......... 23 S-00886M-xxWx ...... 23 S-000886-xxS .......... 23 RG901AG .................. 4 SK9402BW ............... 14 BB9402S .................. 14 SK9402SW ............... 14 BB9402T................... 14 SK9404BW ............... 14 BB9404S .................. 14 SK9404SW ............... 14 BB9404T................... 14 SK9406BW ............... 14 BB9406S .................. 14 SK9406SW ............... 14 BB9406T................... 14
SK9408BW ............... 14 BB9408S .................. 14 SK9408SW ............... 14 BB9408T................... 14 SK9412BW ............... 14 BB9412F................... 14 BB9412S .................. 14 SKA9412SE.............. 14 SK9412SW ............... 14 BB9412T................... 14 SK9416BW ............... 14 BB9416F................... 14 BB9416S .................. 14 SK9416SW ............... 14 BB9416T................... 14 BK9450R .................. 2 BK9453FA................. 3 BK9475A................... 3
1 TM
Short Stem LNG Valves T9450 Series & T9460 Series Application The T9450 and TES9400 series valves are designed for use on portable LNG cylinders and other in-line shut-off valve applications. Approved for TPED in accordance with EN1626.
Features ‡ 6SULQJ ORDGHG VWHP VHDO DXWRPDWLFDOO\ DGMXVWV IRU DQ\ JDVNHW ZHDU eliminating the need to constantly retighten the packing nut. ‡ 1RQ ULVLQJ VWHP DQG ORZ SURILOH DOORZ WKH YDOYH WR ILW LQWR WLJKW areas and still provide easy access. ‡ 8QLTXH SUHVVXUH VHDOHG PRLVWXUH EDUULHU KHOSV SUHYHQW IUHH]H XS at LNG temperatures. ‡ &RQLFDO VZLYHO VHDO GHVLJQ KHOSV SUHYHQW VHDW JDOOLQJ IURP RYHU WRUTXLQJ ‡ 0D[LPXP ZRUNLQJ SUHVVXUH LV 36,* %DU
‡ :RUNLQJ WHPSHUDWXUH UDQJH LV ž) WR ž) ƒ& WR ƒ&
‡ )DFWRU\ 7HVWHG
Materials
Body ........................................................................................ Brass Bonnet ..................................................................................... Brass Seat Disc ................................................................................. CTFE Stem Seal Gasket.................................................................... PTFE Handwheel........................................................................ Aluminum Spring ....................................................................... Stainless Steel Upper Stem ............................................................................. Brass Lower Stem ....................................................... Manganese Bronze
Ordering Information Part Number
Inlet
Outlet
2ULÂżFH $
T9452 T9453 T9454 TES8452 TES8453 TES8454
Ÿ� F.NPT Ǫ´) 137 ½� F.NPT Ÿ� F.NPT Ǫ´) 137 ½� F.NPT
Ÿ� F.NPT Ǫ´) 137 ½� F.NPT Ÿ� F.NPT Ǫ´) 137 ½� F.NPT
.250
TES8464
.675 Tube
Ǫ´) 137
Length B
.406
+HLJKW $SSUR[ &
Tube D
2ž�
None
.250 2½�
None 4�
.406
NJ´ NJ´ NJ´
&v )DFWRU .99 1.08 1.79 .99 1.76 1.79 1.76
Extended Stem Retrofit Kits Application These retrofit kits can be used to convert the 9450 and 9460 series short stem shut off valves into extended stem style. The conversion can be done without removing the valve from your system. Available in two stem lengths. These kits help to prevent cold in the handwheel.
Materials Body ........................................................................................ Brass Seat Disc ................................................................................. CTFE Handwheel........................................................................ Aluminum Packing .................................................................................... PTFE Stem ......................................................................... Stainless Steel Stem Seal Gasket.................................................................... PTFE
Ordering Information Part Number
6WHP /HQJWK $
Style
ES8450R BK9450R
4� 6.5�
Extended Stem, Std. Bonnet, Manual Packing Extended Bonnet and Stem, Spring Loaded Packing
2 TM
ES8450 Series LNG Extended Stem Valves BK9450 & BK9470 Series Extended Bonnet Valves Application These valves are designed for use as a trycock valve or hose drain valve on LNG bulk tanks. These valves can be used likewise for other cold gas applications requiring extended stem valves as LNG Fueling.
Features ‡ 8QLRQ ERQQHW ‡ 2QH SLHFH VWDLQOHVV VWHHO VWHP ES 8450 Series
‡ &RQLFDO VHDW GHVLJQ ‡ 0D[LPXP ZRUNLQJ SUHVVXUH LV SVLJ %DU
‡ :RUNLQJ WHPSHUDWXUH LV ž) WR ž) Âą ƒ& WR ƒ& ‡ )DFWRU\ 7HVWHG (6 6HULHV VSHFLILF IHDWXUH ‡ 0DQXDO WRUTXH FRPSUHVVLRQ SDFNLQJ %. DQG %. 6HULHV VSHFLILF IHDWXUH ‡ ([WHQGHG ERQQHW DQG VSULQJ ORDGHG SDFNLQJ
BK 9450 Series
%. 6HULHV VSHFLILF IHDWXUH ‡ 6W 6WO 7XEH EUD]HG LQWR RQH RU ERWK HQGV
Materials Body and Bonnet ..................................................................... Brass Stem ......................................................................... Stainless Steel Seat Disc ................................................................................. CTFE Handwheel........................................................................ Aluminum Packing and Bonnet Gasket .................................................... PTFE
Conversion Kit BK 9450-KIT is a bonnet and stem assembly kit to convert ES 8450 Series and previous ES 9450 Series to the BK 9450 style. BK 9470 Series
Ordering Information Part Number ES 8452 ES 8453 ES 8454 BK 9452 BK 9453 BK 9454 %. )$ %. $
,QOHW 2XWOHW &RQQHFWLRQV 1/4�
FNPT 3/8� FNPT 1/2� FNPT 1/4� FNPT 3/8� FNPT 1/2� FNPT 5/8� OD tubing x 3/8�FNPT 5/8� OD tubing both ends
+HLJKW ³$´ 4� 4� 4� 6.5� 6.5� 6.5� 6.5� 6.5�
%RG\ :LGWK ³%´
:LGWK ZLWK 7XEH ³&´
&Y
4.0� 5.5�
0.70 1.10 1.10 0.70 1.10 1.10 1.10 1.10
2.5�
3 TM
LNG Regulators RG Series Application The RG series LNG regulators are primarily designed to maintain pressure on liquid within LNG containers. They may also be used in LNG lines, vaporizer and converter applications. They are especially useful in installations where space and cost limitations are important.
Features ‡ $OO SDUWV DUH FRSSHU DOOR\ EUDVV 37)( DQG VWDLQOHVV VWHHO² materials selected specifically for compatibility with LNG temperatures. ‡ %RG\ DQG ERQQHW PDFKLQHG IURP VROLG EUDVV EDU VWRFN ‡ 37)( VHDW KHOSV DVVXUH D SRVLWLYH VKXW RII DW /1* WHPSHUDWXUHV ‡ +LJK DQG ORZ SUHVVXUH UHJXODWRUV DUH WKH VDPH FRPSDFW VL]H² designed to fit in close quarters. ‡ ,QWHUFKDQJHDEOH ZLWK H[LVWLQJ /1* UHJXODWRU XQLWV ‡ ,QOHW ILOWHU KHOSV SUHYHQW IRUHLJQ PDWHULDO IURP HQWHULQJ WKH UHJXODWRU ‡ /RFNQXW LV SURYLGHG WR PDLQWDLQ DGMXVWLQJ VFUHZ VHWWLQJ ‡ 0D[LPXP LQOHW SUHVVXUH RI 36,* %DU
‡ )DFWRU\ 7HVWHG
Materials
Ordering Information Part Number
,QOHW 2XWOHW &RQQHFWLRQV ) 137 $
5* $ 5* $ 5* $ 5* $*
Ÿ�
5* $
5* $*
Body ........................................................................................ Brass Bonnet ..................................................................................... Brass Seat Retainer........................................................................... Brass Seat ......................................................................................... PTFE Springs ..................................................................... Stainless Steel Diaphragm Gasket................................................................... PTFE Backcap Gasket ................................................................... Copper Diaphragm ...............................................................................Bronze :LGWK %
1
2 /16�
&
3�
D
1�
3UHVVXUH 6HWWLQJ 36,* 2SHUDWLQJ 5DQJH 36,*
22 125 300 90
0-30 25-250 125-350 30-250
LNG Economizers ECL & ECR Series Application The ECL & ECR series LNG economizers are primarily designed to utilize the gas pressure in a liquid LNG cylinder that would otherwise be lost to the atmosphere through the pressure relief valve. They may also be used in LNG lines, vaporizer and converter applications. They are especially useful in installations where space and cost limitations are important.
Features ‡ $OO SDUWV DUH FRSSHU DOOR\ EUDVV 37)( DQG VWDLQOHVV VWHHO² materials selected specifically for compatibility with LNG temperatures. ‡ %RG\ DQG ERQQHW PDFKLQHG IURP VROLG EUDVV EDU VWRFN ‡ 7KH (&/ 6HULHV XWLOL]HV D VWDLQOHVV VWHHO QHHGOH VHDW GHVLJQ WKDW provides a very sensitive flow control at lower pressure settings. ‡ +LJK DQG ORZ SUHVVXUH HFRQRPL]HUV DUH WKH VDPH FRPSDFW VL]H² designed to fit in close quarters. The compact high pressure design has no loss of capacity. ‡ ,QWHUFKDQJHDEOH ZLWK H[LVWLQJ /1* HFRQRPL]HU XQLWV ‡ ‡ ‡ ‡
Materials
,QOHW ILOWHU KHOSV SUHYHQW IRUHLJQ PDWHULDOV IURP HQWHULQJ WKH HFRQRPL]HU /RFNQXW LV SURYLGHG WR PDLQWDLQ DGMXVWLQJ VFUHZ VHWWLQJV 0D[LPXP LQOHW SUHVVXUH RI 36,* %DU
)DFWRU\ 7HVWHG
Ordering Information Part Number (&/ (&/ (&/ (&5 (&/
*Contact factory for additional settings.
,QOHW 2XWOHW &RQQHFWLRQV ) 137 $
Ÿ�
(&/ 6HULHV
Body ........................................................................................ Brass Bonnet ..................................................................................... Brass Seat .......................................................................... Stainless Steel Springs ..................................................................... Stainless Steel Gasket ..................................................................................... PTFE
:LGWK %
21/16�
&
3�
D
Ǫ´
3UHVVXUH 6HWWLQJ 36,* 2SHUDWLQJ 5DQJH 36,*
22 70 140 140 325
10-150 10-150 150-350
4 TM
Heavy Duty Natural Gas Line Regulator 1780 Series (Ideal for LNG Engine Fuel Applications) Application The 1780 Series Regulators are designed for final line pressure regulation on Natural Gas Fuel distribution systems. The 1780 Series Regulators have the same valve design, brass body, and internal parts as the premium BR-1780 Series. Flow performance is likewise equal to the BR-1780 Series.
Features ‡ 0DLQWDLQV D VWHDG\ GRZQVWUHDP SUHVVXUH DFURVV D UDQJH RI LQOHW pressure commonly provided by a LNG bulk tank or cylinder. ‡ /DUJH VHDW DQG GLDSKUDJP DUHDV SURYLGH KLJK FDSDFLW\ ZLWK sensitive control of delivery pressure with low falloff. ‡ 7ZR ´ )137 GHOLYHU\ SUHVVXUH JDXJH SRUWV DUH ORFDWHG SOXJJHG RQ HDFK VLGH RI WKH YDOYH ‡ 7ZR ERQQHW GUDLQ YHQW KROHV WR DOORZ IRU GLIIHUHQW PRXQWLQJ orientation. ‡ 7 KDQGOH DGMXVWLQJ VFUHZ 1780 Series
‡ 0D[LPXP LQOHW SUHVVXUH LV SVLJ %DU
‡ $YDLODEOH LQ IRXU GHOLYHU\ SUHVVXUH UDQJHV ‡ 7HPSHUDWXUH UDQJH ƒ ) WR ) ž& WR ž&
‡ )DFWRU\ 7HVWHG
Materials Body ........................................................................... Forged Brass Bonnet ........................................................ Nickel Plated Aluminum Diaphragm ..................................................... Nitrile with PTFE liner Springs and Fasteners ............................................. Stainless Steel Other valve parts ..................................................................... Brass Seat Disc & O-Rings.............................................. Viton is standard
Ordering Information Part Number $ 1784B &
Delivery Pressure Range 5-55 psig 40-110 psig 100-200 psig
1784D
175-300 psig
$ 1786B & 1786D $ 1788B & 1788D
5-55 psig 40-110 psig 100-200 psig 175-275 psig 5-55 psig 40-110 psig 100-200 psig 175-275 psig
Pressure Gauge* 5DQJH 36,
P/N 1-100 1286 1-200 S1679 1-400
15578
1-100 1-200
1286 S1679
1-400
15578
1-100 1-200
1286 S1679
1-400
15578
*Regulator sold without gauge. Order gauge separately.
TM
'LPHQVLRQV
Inlet & Outlet ) 1 3 7
³$´
³%´
³&´
³'´
&v
½�
2.82�
3.62�
1.38�
5.47�
3.1
ž�
4.8 3.31�
1�
4.69�
1.60�
6.84� 5.5
5
Heavy Duty Natural Gas Line Regulators Performance Curves 1780 Series & BR-1780 Series
6 TM
Heavy Duty Natural Gas Brass Final Line Pressure Regulator BR-1780 Series Application The BR-1780 Series Regulators are designed for final line pressure regulation. The BR-1780 Series Regulators have a balanced seat, and offer a tamper resistant adjustment screw cap. Flow performance is impressive as well offering up to 30,000 SCFH for the ž� and 1� model and up to 20,000 SCFH for the ½� model.
Features ‡ 0DLQWDLQV D VWHDG\ GRZQVWUHDP SUHVVXUH DFURVV D UDQJH RI LQOHW pressure commonly provided by a LNG bulk tank or cylinder. ‡ /DUJH VHDW DQG GLDSKUDJP DUHDV SURYLGH KLJK FDSDFLW\ ZLWK sensitive control of delivery pressure with low falloff. ‡ 7ZR Ÿ´ )137 GHOLYHU\ SUHVVXUH JDXJH SRUWV DUH ORFDWHG SOXJJHG on each side of the valve. ‡ 7ZR ERQQHW GUDLQ YHQW KROHV WR DOORZ IRU GLIIHUHQW PRXQWLQJ orientation. BR-1784
‡ %RQQHW FDS FRYHULQJ DGMXVWLQJ VFUHZ IRU WDPSHU SURWHFWLRQ ‡ 0D[LPXP LQOHW SUHVVXUH LV SVLJ %DU
‡ $YDLODEOH LQ IRXU GHOLYHU\ SUHVVXUH UDQJHV ‡ 7HPSHUDWXUH UDQJH ƒ ) WR ƒ ) ž WR ž&
‡ )DFWRU\ 7HVWHG
Materials Body ........................................................................... Forged Brass Bonnet ............................................. Cast bronze for BR-1786/1788 Forged brass for BR-1784 Diaphragm ..................................................... Nitrile with PTFE liner Springs, fasteners, and adjusting screw ................... Stainless Steel Other valve parts ..................................................................... Brass Seat Disc & O-Rings.............................................. Viton is standard
BR1786 and BR1788
Maintenance and Options Kits 5HJXODWRU 0RGHOV 5HSDLU .LW 3DUW 1XPEHU 6SULQJ .LW 3DUW 1XPEHUV “A� spring 5 –55 psig �B� spring 40-110 psig �C� spring 100-200 psig �D� spring 175-275 psig T-Handle Screw Option Kit
BR1784
BR1786
BR1788
BR1784-80
BR1786-80
BR1786-80
%5 6.$ BR1784-7SKB %5 6.& BR1784-7SKD BR1784ST
%5 6.$ BR1786-7SKB %5 6.& BR1786-7SKD BR1786ST
%5 6.$ BR1788-7SKB %5 6.& BR1788-7SKD BR1786ST
7 TM
Heavy Duty Natural Gas Brass Final Line Pressure Regulator BR-1780 Series Flow Performance See the RegOÂŽ Flow Performance Curves section of the catalog for more detailed flow curves.
Ordering Information Part Number
Delivery Pressure Range
5DQJH 36,
P/N
%5 $
5-55 psig
1-100
1286
BR-1784B
40-110 psig
1-200
S1679
%5 &
100-200 psig
BR-1784D
175-300 psig
1-400
15578
'LPHQVLRQV
Pressure Gauge*
%5 $
5-55 psig
1-100
1286
BR-1786B
40-110 psig
1-200
S1679
%5 &
100-200 psig
BR-1786D
175-275 psig
1-400
15578
%5 $
5-55 psig
1-100
1286
BR-1788B
40-110 psig
1-200
S1679
%5 &
100-200 psig
BR-1788D
175-275 psig
1-400
15578
Inlet & Outlet ) 1 3 7
³$´
³%´
³&´
³'´
&v
½�
2.82�
3.62�
1.38�
5.21�
3.1
ž�
3.31�
4.69�
1.60�
6.46�
4.8
1�
3.31�
4.69�
1.60�
6.46�
5.5
*Regulator sold without gauge. Order gauge separately.
8 TM
Natural Gas Low Pressure Second Stage Regulators LV4403B66L05 Application
Materials
Designed to reduce first stage pressure of 5 to 20 PSIG down to burner pressure, normally 5-7� w.c. Ideal for medium commercial installations, multiple cylinder installations and normal domestic loads.
Body .............................................................................. Die Cast Zinc Bonnet ........................................................................... Die Cast Zinc Nozzle Orifice ............................................................................ Brass Spring ......................................................................................... Steel Valve Seat Disc ........................................................ Resilient Rubber Diaphragm ........................... Integrated Fabric and Synthetic Rubber
Features ‡ /DUJH YHQW KHOSV SUHYHQW EORFNDJH DQG KDV ž" F.NPT for vent piping.
/9 % 6HULHV
‡ :LWK 36,* LQOHW SUHVVXUH UHJXODWRU LV GHVLJQHG WR QRW SDVV more than 2 PSIG with the seat disc removed. ‡ ,QFRUSRUDWHV LQWHJUDO UHOLHI YDOYHV ‡ 5HSODFHDEOH YDOYH RULILFH DQG YDOYH VHDW GLVF ‡ 6WUDLJKW OLQH YDOYH FORVXUH UHGXFHV ZHDU RQ VHDW GLVF ‡ 8QLTXH ERQQHW YHQW SURILOH PLQLPL]HV YHQW IUHH]H RYHU ZKHQ properly installed. ‡ /DUJH PROGHG GLDSKUDJP LV H[WUD VHQVLWLYH WR SUHVVXUH FKDQJHV ‡ %XLOW LQ SUHVVXUH WDS KDV SOXJJHG 18" F.NPT outlet. Plug can be removed with a 316" hex allen wrench.
UL
‡ 6HOHFW EURZQ ILQLVK
ÂŽ
Backmount Design Mounts directly to house line piping. Eliminates need for union joints, elbows, and mounting brackets. Quick and easy to install. 33Âť16"
1½"
Outlet
4½"
71Âť8" 5Âź" Dia.
O
PRODU
NT
G
RE
Y
AR
S
10
E
/9 %5
CT
10
313Âť16"
17Âť16"
/9 %
Y
75Âť32" Approx.
2Âź"
WA R R
A
Ordering Information Part Number
,QOHW &RQQHFWLRQ
/9 % /9 %
)DFWRU\ 'HOLYHU\ Pressure
#28 Drill
5� w.c. at 10 PSIG Inlet
$GMXVWPHQW 5DQJH
%RQQHW 9HQW 3RVLWLRQ
9DSRU &DSDFLW\ %78 KU 3URSDQH
3.8� to 7.7� w.c.
Over Inlet
935,000
½� ½� F. NPT
/9 % 5
ž� F. NPT
/9 % /9 % 5
2ULÂżFH Size
Outlet &RQQHFWLRQ
ž� F. NPT
* Backmount design ** Maximum flow based on 10 PSIG inlet and 9� w.c. delivery pressure.
9 TM
Natural Gas Low Pressure Second Stage Regulators LV4403F66 Series Application
Materials
'HVLJQHG WR UHGXFH LQOHW SUHVVXUH RI IURP EDU 36, WR D GHOLYHU\ SUHVVXUH RI ´ ZF PEDU
Body .............................................................................. Die Cast Zinc Bonnet ........................................................................... Die Cast Zinc Nozzle Orifice ............................................................................ Brass Spring ......................................................................................... Steel Valve Seat Disc ........................................................ Resilient Rubber Diaphragm ........................... Integrated Fabric and Synthetic Rubber
Features GHJUHH ULJKW DQJOH LQOHW WR RXWHU FRQQHFWLRQ IRU VWDQGDUG PHWHU installations.
UL
/DUJH YHQW KHOSV WR SUHYHQW EORFNDJH DQG KDV ô´ ) 137 IRU YHQW piping.
®
6WUDLJKW OLQH YDOYH FORVXUH UHGXFHV ZHDU RQ VHDW GLVF 8QLTXH ERQQHW YHQW SURILOH PLQLPL]HV YHQW IUHH]H RYHU ZKHQ properly installed. /DUJH PROGHG GLDSKUDJP LV H[WUD VHQVLWLYH WR SUHVVXUH FKDQJHV
$WWDFKHG WR 9DSRU 0HWHU
%XLOW LQ SUHVVXUH WDS KDV SOXJJHG ǩ´ ) 137 RXWOHW 3OXJ FDQ EH removed with a 3/16” hex allen wrench.
Z 0RXQWLQJ %UDFNHW
6HOHFW %URZQ )LQLVK
Right Angle Design
LV4403F66RA
Can mount directly to vapor meter. It is also suitable for mounting directly to the house piping. It will retrofit into existing installations that are currently using a 90 degree, right angle regulator.
22
Delivery Pressrue mbar
20
3 bar
18 16 14 12 10
0
10
20
30
40
50
60
Flow m3/h Natural Gas
PRODU
NT
G
RE
Y
AR
S
10
E
CT
10
5¼"
7¼"
Y
O
WA R R
A
Ordering Information Part Number
2 3/16"
,QOHW &RQQHFWLRQ
Outlet &RQQHFWLRQ
2UL¿FH Size
)DFWRU\ 'HOLYHU\ Pressure mbar
$GMXVWPHQW Range mbar
¾” F. NPT
¾” F. NPT
3/16”
17.4
15-22.4
%RQQHW 9HQW 3RVLWLRQ
9DSRU &DSDFLW\ P KU Natural Gas
/9 ) 5$ /9 ) 5$% /9 ) 5$
Over Inlet
30.5
9.00
10 TM
RegOŽ - LNG Angle Pressure Relief Valve AR Series Application 7KH $60( DSSURYHG ƒ UHOLHI YDOYHV $5 6HULHV SURYLGH SUHFLVH control set points which protect LNG vessels and piping systems for over-pressurization.
Features ‡ +LJK IORZ UDWHV DUH DSSURYHG E\ $60( ULJRURXV WHVWLQJ WR &RGH VIII. ‡ 7KH QLQHW\ GHJUHH FRQILJXUDWLRQ SURYLGHV UHOLHI RI /1* JDVHV directly avoiding flow through the spring. ‡ %XEEOH WLJKW VHDW SURYLGHV VKXW RII ZKHQ UHVHDWLQJ RU VWDWLF mode. ‡ $ YDULHW\ RI LQOHWV DQG SUHVVXUH VHWWLQJV DVVXUH DGKHUHQFH WR application requirements. ‡ 7HPSHUDWXUH 5DQJH ƒ) ƒ& WR ƒ) ƒ&
‡ )DFWRU\ 7HVWHG
Materials Body ................................................................... Bronze ASTM B61 Upper Body........................................... Stainless Steel ASTM A582 Seat & Stem .......................................................... Brass ASTM B16 Poppet Guide......................................................... Brass ASTM B16 Spring Retainer...................................................... Brass ASTM B16 Adjusting Screw ..................................................... Brass ASTM B16 Cap ........................................................................ Brass ASTM B16 Bushing................................................ +RVWDIORQ 7)0 7HIORQ
Ball............................................................................ Stainless Steel Upper Gasket ................................................... PTFE ASTM D4894 Lower Gasket .............................................. Copper ASTM B152-17 Spring ................................................... Stainless Steel ASTM A313 Screw..................................................................... Brass ASTM B16 Grooved Pin.......................................... Stainless Steel ASTM A581 Cable & Tie Assy .......................................... Stainless Steel & Lead
$5 6HULHV
Ordering Information ,QOHW ,QFKHV 2XWOHW ,QFKHV '1 PP
'1 PP
Part Number
ž�
1�
1½�
$5 $ $5 $ $5 $
*Different PSI settings are available
TM
1�
1Ÿ�
2�
Ends
Thread NPT
$ B & D E ,QFKHV PP ,QFKHV PP ,QFKHV PP ,QFKHV PP ,QFKHV PP
6.03�
6.88�
9.64�
1.97�
2.37�
3.20�
1.63�
2.00�
2.45�
1.63�
1.90� 2.60�
2.49�
3.01�
3.89�
$60( )ORZ &DSDFLW\ 6&)0 $LU @ 250 PSI * 450 1,003 2,277
:HLJKW Lbs .J
2.75
3.75
8.00
11
RegOÂŽ - LNG Diverter (3-Way) Valve DR Series Application The Diverter Valve DR Series, provide a simple solution for the isolation of pressure relief devices during routine change out of a Relief Valve without evacuating the LNG vessel. Excellent for protecting bulk LNG liquid vessels, transport trailers and industrial pipelines, and LNG systems. DR6108
Features ‡ +LJK IORZ UDWHV FRPSOHPHQW RXU $5 VHULHV SUHVVXUH UHOLHI YDOYHV ‡ 9DOYH VLGH VHOHFWLRQ LV DFFRPSOLVKHG ZLWK D KHDY\ GXW\ FRQWURO arm clearly labeled for positive isolation. ‡ 5HJ2Š QHHGOH YDOYHV DFFHVVRUL]H IRU HDV\ EOHHG RI JDV EHIRUH removing pressure relief devices. ‡ )LWWHG ZLWK WKUHDGHG WRS 5HOLHI 9DOYH SRUWV DQG ERWWRP %XUVW 'LVN connections. ‡ 3UHVVXUH 5DWLQJ 36, %DU &:3 ‡ 7HPSHUDWXUH 5DWLQJ ƒ) ƒ& WR ƒ) ƒ& ‡ )DFWRU\ WHVWHG
Materials Body ............................................. Bronze ASTM B61 UNS C92200 Bushing, End Cap............................................... Brass B16 C36000 Spring Clamp ........................................................................... Brass Thread Ring ............................................. Brass ASTM B16 C36000 Seat Rings ...................................................... PCTFE ASTM D1430 Gasket ..................................................................................... PTFE Screw........................................................................ Stainless Steel Ball..................................................................... 316 Stainless Steel Pipe Plug ...................................... Brass ASTM B16 UNS C360000 Spring Washer .......................................................... Stainless Steel Spacer ............................................ Brass ASTM B16 UNS C36000 Lever............................................................. Cadmium Plated Steel Packing .................................................................................... PTFE Stem ............................... Stainless Steel ASTM A582 UNS S30300 Packing Nut .................................... Brass ASTM B16 UNS C36000 Lock Washer ............................................................. Stainless Steel
DR6112 & DR6113
Ordering Information Part Number
,QOHW ,QFKHV '1 PP
2XWOHW ,QFKHV '1 PP
DR6108
1�
ž�
DR6112
1½�
1�
DR6113
1½�
1½�
12
&RQQHFWLRQ 7\SH
$ ,QFKHV PP
B ,QFKHV PP
& ,QFKHV PP
D ,QFKHV PP
Height ,QFKHV PP
:HLJKW Lbs .J
4.65�
Thread NPT
4�
5.94�
5.94�
2.94�
5.70
5.70
R 7.36�
R 7.36�
R 7.36�
5.18�
5.770�
5.770�
10�
28�
30�
-
TM
RegOŽ - LNG Safety Assembly – Relief Valve, Diverter & Burst Disk - DA Series Application RegOŽ provides a complete unitized solution for pressure relief devices assembled in a factory setting, ready for attachment to LNG bulk tanks. Ideal for OEM applications where pre-fabricated assemblies are favored to streamline constructions. Excellent for protecting bulk LNG liquid vessels, transport trailers, industrial pipelines and LNG systems.
'$
Features ‡ +LJK IORZ UDWHV FRPSOHPHQW RXU $5 VHULHV SUHVVXUH UHOLHI YDOYHV and burst disks. ‡ 9DOYH VLGH VHOHFWLRQ LV DFFRPSOLVKHG ZLWK D KHDY\ GXW\ FRQWURO arm clearly labeled for positive isolation. ‡ 5HJ2Š QHHGOH YDOYHV DFFHVVRUL]H IRU HDV\ EOHHG RI JDV EHIRUH removing pressure relief devices. ‡ 3UHVVXUH 5DWLQJ 36, EDU ‡ 7HPSHUDWXUH 5DWLQJ ƒ) ƒ& WR ƒ) ƒ&
'$
Ordering Information Part Number
,QOHW ,QFKHV '1 PP
'$
1�
'$
1½�
&RQQHFWLRQ 7\SH
$ ,QFKHV PP
B ,QFKHV PP
& ,QFKHV PP
D ,QFKHV PP
Thread NPT
4.76�
8.33�
13.08�
16.30�
9.75�
15.75�
7.00�
8.06�
E ,QFKHV PP
ž� NPT 1� NPT
13 TM
RegOÂŽ - Bronze & Stainless Steel Globe Valve for LNG Service BB & SK Series Application
SK
The SK & BB Series globe valves are designed for handling of LNG through bulk tanks, trucks, trailers, iso-containers and piping FRQÂżJXUDWLRQV 2XU WLPH WHVWHG VSULQJ ORDGHG VWHP SDFNLQJ DQG superior seat design provide for long life and easy maintenance.
Features ‡ 6XSHULRU )ORZ 3URYLGHV KLJK &Y IRU UDSLG DQG UHOLDEOH ORDGLQJ DQG unloading. ‡ 9 5LQJ VSULQJ ORDGHG SDFNLQJ SURYLGHV H[WHQGHG VHUYLFH OLIH without constant packing adjustment. ‡ &RQLFDO 3&7)( 6HDW SURYLGHV H[FHSWLRQDO Ă€RZ EXEEOH WLJKW VHDO less chance of debris trapped in the seat, longer service life. ‡ Ideal for loading & unloading LNG bulk tanks and trucks. The 1½â€? & 2â€? valves are designed to be operator friendly, they open and FORVH FRPSOHWHO\ ZLWK RQO\ IRXU ƒ WXUQV ‡ &RQQHFWLRQV 6RFNHW :HOG DQG %XWWZHOG ‡ 6L]HV ó´ WR Âł ‡ %RQQHW 7\SH %ROWHG ‡ 3UHVVXUH 5DWLQJ 36, EDU &ODVV ‡ 7HPSHUDWXUH 5DWLQJ ƒ) ƒ& WR ƒ) ƒ& ‡ 6HUYLFH /LTXHÂżHG 9DSRUL]HG $WPRVSKHULF *DVHV DQG /1* IRU 7UDLOHUV %XON 7DQNV ,VR &RQWDLQHUV DQG 3LSLQJ &RQÂżJXUDWLRQV
6.$
Materials Bonnet for BB Series ...........................................Brass UNS C37700 Body for BB Series ............................................... Bronze ASTM B61 Body & Bonnet for SK Series ............... Stainless Steel ASTM A351 Stem ..................................................... Stainless Steel ASTM A351 External Tube ........................................................... Stainless Steel Spring ................................................... Stainless Steel ASTM A313 Packing .................................................................................... PTFE Gasket ............................................................. 37)( *ODVV )LOO Seat Disk ........................................................ PCTFE ASTM D1430 Seat Retainer......................................................... Brass ASTM B16 Bonnet Screws ................................................ Stainless Steel A320 Handwheel.................. Chromated Coated Ductile Iron ASTM A395
Ordering Information Part Number 6. %: 6. %: 6. %: 6. %: 6. %: 6. %: 6. 6: 6. 6: 6. 6: 6. 6: 6. 6: 6. 6: 6.$ 6( BB9402T BB9404T BB9406T BB9408T BB9412T BB9416T BB9412F BB9416F BB9402S BB9404S BB9406S BB9408S BB9412S BB9416S
Size ,QFKHV Ÿ� ½� ž� 1� 1½� 2� Ÿ� ½� ž� 1� 1½� 2� ò´ ž Ÿ� ½� ž� 1� 1½� 2� 1½� 2� Ÿ� ½� ž� 1� 1½� 2�
Size mm 8 15 20 25 40 50 8 15 20 25 40 50 40 8 15 20 25 40 50 40 50 8 15 20 25 40 50
&RQQHFWLRQ
$
B
&
K
2.68
3.00
10.65
14.40 Buttweld 14.60 16.21
Stainless Steel
3.62
4.00
10.49
4.75 5.75
4.75 5.25
10.42 11.11
2.68
3.00
10.65
14.40 Socket Weld
14.60 16.21 14.60 14.40
Threaded
Bronze
Flange
14.60 16.21 14.60 16.21 14.40
SBT 14.60 16.21
3.62
4.00
10.49
4.75 5.75 2.68 2.88 3.55 3.75 4.73 5.83 6.50 8.00 2.68 2.88 3.55 3.75 4.73 5.83
4.75 5.25 4.75
10.42 11.11 10.42
3.00
10.65
4.00
10.49
4.75 5.25 4.75 5.25
10.42 11.11 10.42 11.11
3.00
10.65
4.00
10.49
4.75 5.25
10.42 11.11
&Y 1.7 5.0 9.4 14 28.3 53 1.7 5.0 9.4 14 28.3 42 53 1.7 5.0 9.4 14 28.3 53
:HLJKW
-
-
1.7 5.0 9.4 14 28.3 53
8.30 8.30 12.90 21.60 8.30 8.30 12.90 21.60 11.50 8.30 12.90 21.60
8.30 12.90 21.60
14 TM
Stainless Steel Globe Valve for LNG Service 210 Series Application The 210 Series globe valves are designed for handling of LNG through large size bulk vessels, trucks, trailers, iso-containers and SLSLQJ FRQÂżJXUDWLRQV
Features ‡ 2XU LQYHVWPHQW FDVW VWDLQOHVV VWHHO LV VSHFLILHG E\ OHDGLQJ industrial gas companies for transportation, storage tank, pipelines & plants. ‡ 6SHFLDO ERQQHW H[WHQVLRQV FDQ EH VXSSOLHG IRU FROG ER[ applications. ‡ +LJK &Y IRU UDSLG DQG UHOLDEOH ORDGLQJ DQG XQORDGLQJ ‡ &RQQHFWLRQV )ODQJH 7KUHDGHG 6RFNHW :HOG DQG %XWWZHOG ‡ 6L]HV ò´ WR ³ PP PP
‡ %RQQHW %ROWHG ‡ 3UHVVXUH 5DWLQJ 36, EDU &ODVV ‡ 7HPSHUDWXUH 5DWLQJ &ROG 1RQ 6KRFN ƒ) ƒ& WR ƒ) ƒ& ‡ )DFWRU\ 7HVWHG ‡ 6HUYLFH /LTXHILHG 9DSRUL]HG $WPRVSKHULF *DVHV DQG /1* IRU Trailers, Bulk Tanks, Iso-Containers and Piping Configurations. Valves for Hydrogen Service can be supplied. 210 Series
Materials Body & Bonnet......................... Stainless Steel ASTM A351 J92600 Stem ........................................ Stainless Steel ASTM A479 S30400 External Tube ................. Stainless Steel ASTM A511/A249 S30403 Packing .................................................................................... PTFE Gasket ............................................................. 37)( *ODVV )LOO Seat Disc ........................................................ PCTFE ASTM D1430 Seat Retainer......................................... Brass ASTM A479 S30400 Bonnet Screws ........................ Stainless Steel ASTM F880 S30400 Handwheel..................................... Ductile Iron ASTM A395 F32800
Max. Open
Ordering Information
*6 : ) *6 : ) *6 : : $
Size ,QFKHV 3 4 3
Size mm 80 100 80
*6 : : $
4
100
*6 : : *6 : : -
3 4
80 100
Part Number
,QFKHV &RQQHFWLRQ RF Flange Buttweld SCH10 Buttweld SCH40
$ 9.5� 11.5� 12�
B 30.5� 36.75� 30.5�
& 10� 12� 10�
K 19.06� 21.68� 19.06�
&Y 60 175 60
:HLJKW /EV NJ
13.5�
36.75�
12�
21.68�
175
12.5� 14�
30.5� 36.75�
10� 12�
19.06� 21.68�
60 175
15 TM
RegOÂŽ - LNG Fill Manifold CFM, AFM, PFM & SFM Series Application RegOÂŽ high quality brazed and welded assemblies are ideally suited for the original equipment manufacturer of bulk LNG vessels. A wide variety of valve types including union or bolted bonnet, bronze or stainless steel bodies & top works and piping of stainless steel or copper construction are available as production unit. Safe and reliably used in LNG Systems. In addition RegOÂŽ can FXVWRP GHVLJQ FRQÂżJXUDWLRQV WKDW DUH ZHOGHG DQG EUD]HG LQ D IDFWRU\ setting.
Features ‡ 8QLWL]HG FRQVWUXFWLRQ HOLPLQDWHV OHDNV DQG SURYLGHV HDV\ ILW XS WR tank piping. ‡ 0RGXOHV FRPPRQO\ LQFOXGH WRS DQG ERWWRP ILOO YDOYHV ILOO FKHFN with strainer and hose bleed and relief valve. ‡ 0DQ\ RSWLRQV DUH DYDLODEOH ZKLFK LQFOXGH UHGXQGDQW LVRODWLRQ valves or specific end user dimensions and specifications. ‡ 2XU YDOYH SURGXFWV VWDQG XS WR KLJK F\FOH HQYLURQPHQWV ZLWKRXW the need for field adjustment of valve packing. ‡ $YDLODEOH DORQH RU DV D XQLWL]HG ZHOGHG DVVHPEO\ IRU EXON WDQN filling. ‡ 5HSHDWDEOH SHUIRUPDQFH DQG JHRPHWU\ ‡ 3UHFLVLRQ VLOYHU EUD]HG DQG ZHOGHG DVVHPEO\ ‡ 3UHVVXUH 5DWLQJ 6)0 6HULHV 36, EDU Âą &)0 6HULHV 36, %DU ‡ 7HPSHUDWXUH 5DWLQJ ƒ) ƒ& WR ƒ) ƒ& ‡ )DFWRU\ WHVWHG
&)0 (
Materials 6)0 '
Globe Valve .............................................. Bronze or Stainless Steel Check Valve............................................................................. Brass Bleed Valve.............................................................................. Brass Tube ............................................... 304L Stainless Steel or Copper
Ordering Information Part Number &)0 ' &)0 ' &)0 ( $)0 ' 3)0 ' 6)0 '
Size ,QFKHV 1�
Size mm 25
%RQQHW 7\SH
3LSH 0DWHULDO
Union Stainless Steel
1½�
40
Bolted
Copper Stainless Steel
$ ,QFKHV 10.25
15.00
B ,QFKHV 14.64 15.00 13 14.63
& ,QFKHV 7.5
D ,QFKHV
F ,QFKHV
2.5
9.5 1.75 20
E ,QFKHV
8 8 2.54
3.4
16 TM
Natural Gas “V�-Ring Seal Globe and Angle Valves Application Specifically designed to assure positive shut-off and long, maintenance free service life in vapor service. The high quality construction and wide variety of sizes make them highly suited for use with Natural Gas, LP-Gas, anhydrous ammonia and in the chemical and petrochemical industries.
Features “V�-ring spring-loaded pressure stem seal provides for leak-proof operation. No packing to retighten or replace. ‡ &LUFXODU EULGJH LQ WKH JOREH GHVLJQ DQG D GURSSHG VHDW LQ WKH DQJOH design achieve greater flow with less pressure drop.
7$
UL ÂŽ
‡ 6ZLYHO VHDW GLVF DVVHPEO\ PLQLPL]HV WKH VHDW GLVF IURP JULQGLQJ RQ the body seat. The seat disc stops rotating as soon as it touches the body seat. This feature provides for good seat alignment and assures long seat life.
$ )3
‡ ó´ ) 137 SOXJJHG ERVVHV RQ WKH VLGH RI WKH YDOYH ERG\ DOORZ attachment of a hydrostatic relief valve or vent valve. ‡ ³9´ ULQJ VWHP VHDO YLUWXDOO\ HOLPLQDWHV KDUG WR WXUQ KDQGOHV IUHTXHQWO\ encountered with packed type seals.
$ $3
‡ +HDY\ GXW\ UROOHG $&0( VWHP WKUHDGV SURYLGH TXLFN DFWLRQ DQG ORQJ service life.
$ $3
‡ 3UHVVXUH 5DWLQJ :2* ‡ 7HPSHUDWXUH 5DWLQJ ž ) ž & WR ž ) ž&
$ $3
Materials Body ................................................................................. Ductile Iron %RQQHW .......................................................... Steel %RQQHW .......................................................... Ductile Iron Valve Stem ................................................................. Stainless Steel Wiper Ring ............................................................... Synthetic Rubber Seat Disc ............................................................. See Ordering Chart “V�-Rings ................................................................................... Teflon Handwheel........................................................................ Ductile Iron Spring ......................................................................... Stainless Steel
$ $3 $ )3
Ordering Information Part Number %XQD 1 6HDW 'LVFV
7HĂ€RQ 6HDW 'LVFV
3RUW Diameter
*OREH
$QJOH
*OREH
$QJOH
Inlet and Outlet &RQQHFWLRQ
-
-
7$ 3
7$ /3
½� F. NPT
$ $3
$ $3
7$ $3
7$ $3
ž� F. NPT
$ $3
$ $3
7$ $3
-
1� F. NPT
1�
$ %3
$ %3
7$ %3
7$ %3
1Ÿ� F. NPT
1Ÿ�
$ $3
$ $3
7$ $3
7$ $3
1½� F. NPT
$ )3
-
7$ )3
$ $3
$ $3
7$ $3
$ )3
$ )3
7$ )3
7$ )3
$ $3
$ $3
7$ $3
-
3� F. NPT
$ )3
$ )3
7$ )3
-
3� Flange**
-
1½� Flange** 2� F. NPT 2� Flange**
ž�
1½�
2� NJ´
)ORZ DW 36,* 3UHVVXUH 'URS &Y *30 3URSDQH *OREH
$QJOH
10.0
14.8
12.0
17.7
17.8
22.0
36.5
54.0
43.0
55.5
46.0
-
75.0
88.5
78.0
133.0
197.0
303.0
$FFHVVRULHV +\GURVWDWLF 5HOLHI 9DOYH
9HQW 9DOYH
SS8001U
TSS3169
* Teflon seat discs on valves built to order. * * 300# ANSI R.F. Flange. * * * To obtain approximate flow at other than 1 PSIG pressure drop, multiply flow in chart by square root of pressure drop. ([DPSOH )3 # 36,* [ *30 SURSDQH )RU 1+3 flow, multiple propane flow by .90.
TM
17
Extended Bonnet Bronze Gate Valve for LNG Service 322 and 326 Series Features ‡ 7RS (QWU\ This union bonnet valve can be permanently installed in the line and serviced from the top ‡ &RQVWUXFWLRQ Bronze cast body and Internals Rugged construction for long life Straight through construction for high CV Designed with unique KOLD-SEAL™ Standard split wedge design provides better sealing and cycle life ‡ 6L]HV ò´ ´ PP PP
‡ (QGV 7KUHDGHG )137 6LO %UD]H 7XEH 6%7 6LOYHU %UD]HG 3LSH 6%3 RU ZLWK VWDLQOHVV VWHHO SLSH QLSSOHV EUD]HG LQ ‡ 6HUYLFH Liquified and vaporized atmospheric gases, LNG ‡ 7HPSHUDWXUH 5DWLQJ ƒ) ƒ) ƒ& ƒ&
‡ 3UHVVXUH 5DWLQJ &ROG 1RQ VKRFN
322 Series 400 PSIG 326 Series 600 PSIG Designed to MSS SP-80 and ASME B31.3 Series 1.5� to 3� PED Approved per EN 10204, 3.1
,GHDO IRU /1* VXSSO\ DQG VWRUDJH KDQGOLQJ DSSOLFDWLRQV 6WUDLJKW WKURXJK IORZ IRU KLJKHVW &9 UDWLQJ LQ WKH LQGXVWU\
$OVR DYDLODEOH ZLWK *5$)2,/Š SDFNLQJ
18 TM
Extended Bonnet Bronze Gate Valve for LNG Service 322 and 326 Series Ordering Information 322 Series Bronze Gate Valves 400 PSIG COLD WORKING PRESSURE Part Number
137 6L]H ,QFKHV
NPT Size mm
Ends
:HLJKW /EV
:HLJKW .JV
(VWLPDWHG &9
B-000322-20T4
2½”
65 mm
Threaded
19.00
8.64
372.00
B-000322-24T4
3”
80 mm
Threaded
28.00
121.73
588.00
Part Number
6%7 6L]H ,QFKHV
SBT Size mm
Ends
:HLJKW /EV
:HLJKW .JV
(VWLPDWHG &9
B-000322-4S4
½”
15 mm
Silver Braze
1.75
0.80
19.80
B-000322-6S4
¾”
20 mm
Silver Braze
2.25
1.02
36.00
B-000322-8S4
1”
25 mm
Silver Braze
3.50
1.59
60.80
B-000322-12S4
1½”
40 mm
Silver Braze
7.50
3.41
152.00
B-000322-16S4
2”
50 mm
Silver Braze
11.25
5.11
245.00
B-000322-20S4
2½”
65 mm
Silver Braze
17.00
7.73
372.00
B-000322-24S4
3”
80 mm
Silver Braze
24.00
10.91
588.00
*Nominal Size
326 Series Bronze Gate Valves 600 PSIG COLD WORKING PRESSURE Part Number
137 6L]H ,QFKHV
NPT Size mm
Ends
:HLJKW /EV
:HLJKW .JV
(VWLPDWHG &9
B-000326-4T6
½”
15 mm
Threaded
1.75
0.80
19.80
B-000326-6T6
¾”
20 mm
Threaded
2.25
1.02
36.00
B-000326-8T6
1”
25 mm
Threaded
4.00
1.82
60.80
B-000326-12T6
1½”
40 mm
Threaded
8.25
3.75
152.00
B-000326-16T6
2”
50 mm
Threaded
12.50
5.68
245.00
19 TM
Extended Bonnet Bronze Gate Valve for LNG Service 322 and 326 Series 322 Series 0$:3 36,* 1RQ 6KRFN &ROG 7HPSHUDWXUH 5DWLQJ ƒ ) WR ƒ) Dimensional Data All dimensions are in inches Threaded End (NPT) Size
³$´
³%´
³'´
³.´
ò´
4.68�
22.5�
5.25�
14.5�
´
5.12�
24.87�
6.12�
16.31�
Sil Braze End Size
³$´
³%´
³'´
³.´
³(´
ò´
2.5�
9.38�
2.37�
5.5�
.38�
ô´
3�
10.56�
2.75�
6.12�
.40�
´
3.25�
12.38�
3�
7.68�
.43�
ò´
4�
17�
4�
10.87�
.62�
´
4.5�
19.62�
4.75�
12.38�
.65�
ò´
5.25�
22.5�
5.25�
14.5�
.78�
´
6�
24.87�
6.12�
16.31�
.82�
326 Series 0$:3 36,* 1RQ 6KRFN &ROG 7HPSHUDWXUH 5DWLQJ ƒ ) WR ƒ) Dimensional Data All dimensions are in inches Threaded End (NPT) Size
³$´
³%´
³'´
³.´
ò´
2.34�
9.37�
2Ÿ�
5.5�
ô´
2.5�
10.56�
2ž�
6.12�
´
2.34�
12.37�
3�
7.6�
ò´
3.43�
17�
4�
10.87�
´
3.81�
19.62�
4ž�
12.37�
20 TM
Stainless Steel Gate Valve for LNG Service 110 Series Features ‡ 7RS (QWU\ 7KLV YDOYH FDQ EH SHUPDQHQWO\ LQVWDOOHG LQ WKH OLQH DQG VHUYLFHG from the top ‡ 6RIW 6HDWHG 3&7)( 6HDW SURYLGHV D EXEEOH WLJKW VHDO DQG LV UHSODFHDEOH ‡ &RQVWUXFWLRQ 6WDLQOHVV VWHHO ERG\ DQG ERQQHW ‡ Sizes ò´ ´ PP PP
‡ Ends 5) )ODQJH %XWW ZHOG 6RFNHW ZHOG 7KUHDGHG )137
‡ 6HUYLFH /1* ‡ 7HPSHUDWXUH 5DWLQJ ƒ) ƒ) ƒ& ƒ&
‡ )DFWRU\ 7HVWHG ‡ Pressure Rating &ROG 1RQ VKRFN
&ODVV YDOYH 36,* EDU
&ODVV YDOYH 36,* EDU
110 Series
½� - 6� Class 150 PED Approved, Approved for US and Canada ½� - 6� Class 300 PED Approved, Approved for US and Canada
Ordering Information
6WDLQOHVV %RG\ Ĺ? 5) )ODQJH (QGV 9DOYH 6L]H
150# Part Number
300# Part Number
,QFKHV
00
*6 : )
-
1�
25 mm
Ends
:HLJKW
:HLJKW
/EV
Kg
/EV
.J
Estimated &v
15
6.80
-
-
30.00
*6 : )
*6 : )
1½�
40 mm
35
15.88
45
20.41
85.00
*6 : )
*6 : )
2�
50 mm
35
15.88
50
22.68
100.00
*6 : )
*6 : )
3�
80 mm
65
29.48
85
35.56
310.00
*6 : )
*6 : )
4�
100 mm
90
40.82
120
54.43
700.00
*6 : )
*6 : )
6�
150 mm
150
68.04
200
90.72
850.00
Flange
$16, &ODVV 36,* &ROG :RUNLQJ 3UHVVXUH $16, &ODVV 36,* &ROG :RUNLQJ 3UHVVXUH
6WDLQOHVV %RG\ Ĺ? %XWW :HOG 6RFNHW :HOG 7KUHDGHG (QGV 9DOYH 6L]H
:HLJKW
150# Part Number
300# Part Number
,QFKHV
00
Ends
/EV
.J
(VWLPDWHG &v
*6 : :$ *6 : 6 *6 : 7
*6 : 6 -
½� ½� ½�
15 mm 15 mm 15 mm
Butt Weld SCH10 Socket Weld Threaded
10 15 10
4.54 6.80 4.54
7.00 7.00 7.00
*6 : :$
-
ž�
20 mm
Butt Weld SCH10
10
4.54
23.00
*6 : 6 *6 : :$ *6 : 6 *6 : 7 *6 : :$ *6 : 6 *6 : : $ *6 : : *6 : 6 *6 : : $ *6 : : *6 : : $ *6 : : *6 : :$ *6 : :-
*6 : 6 *6 : 6 *6 : 6 *6 : : $ *6 : : *6 : : $ *6 : : *6 : : $ *6 : : *6 : : $ *6 : : -
ž� 1� 1� 1� 1½� 1½� 2� 2� 2� 3� 3� 4� 4� 6� 6�
20 mm 25 mm 25 mm 25mm 40 mm 40 mm 50 mm 50 mm 50 mm 80 mm 80 mm 100 mm 100 mm 150 mm 150 mm
Socket Weld Butt Weld SCH10 Socket Weld Threaded Butt Weld SCH10 Socket Weld Butt Weld SCH10 Butt Weld SCH40 Socket Weld Butt Weld SCH10 Butt Weld SCH40 Butt Weld SCH10 Butt Weld SCH40 Butt Weld SCH10 Butt Weld SCH40
15 10 15 10 30 35 35 35 30 65 65 80 80 120/150* 120/150*
6.80 4.54 6.80 4.54 13.61 15.88 15.88 15.88 13.61 29.48 29.48 40.82 40.82 54.43/68.04* 54.43/68.04*
23.00 30.00 30.00 30.00 85.00 85.00 100.00 100.00 100.00 310.00 310.00 700.00 700.00 850.00 850.00
$16, &ODVV 36,* &ROG :RUNLQJ 3UHVVXUH $16, &ODVV 36,* &ROG :RUNLQJ 3UHVVXUH
* Second number indicates valve for 300# part number. 6HUYLFH 36, 1RQ VKRFN &ROG Ć” 6HUYLFH 36, 1RQ VKRFN &ROG Ć” 7HPSHUDWXUH 5DWLQJ ƒ) ƒ)
TM
21
RegOÂŽ ASME & Non ASME Relief Valves Application 9400 Series
These relief valves are specifically designed for thermal safety relief applications and LNG liquid containers.
Features ‡ ‡ ‡ ‡ ‡ ‡
%XEEOH WLJKW DW RI VHW SUHVVXUH IDFWRU\ WHVWHG 5HSHDWDEOH SHUIRUPDQFH 7HPSHUDWXUH UDQJH ƒ WR ƒ ) (DV\ WR UHDG FRORU FRGHG SVLJ EDU ODEHOV $GDSWHUV SURYLGH VWDQGDUG SLSH WKUHDG FRQQHFWLRQV IRU YHQWLQJ gas to the outdoors.
(10.50) REF
Materials
SS Style Body ......................................................................... Spring ....................................................................... Seat Retainer............................................................ Adjusting Screw ........................................................ Pipe-Away Adapter ...................................................
EX ó´ [ Ǫ´ $OLJQPHQW
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Candy Cane Riser Tubes Available
14
⠄ � NPT x 3⠄8 OD SS Tube P/N 1332SS 1⠄2 � NPT x 3 ⠄8 OD SS Tube P/N 1334SS ½� NPT x NPT SS Tube P/N 1344SS
Materials
359 DQG % 6W\OH Body ........................................................................................ Brass Spring ....................................................................... Stainless Steel Seat Retainer........................................................................... Brass Adjusting Screw ....................................................................... Brass Pipe-Away Adapter .................................................................. Brass
WARNING ,QVSHFWLRQ DQG PDLQWHQDQFH
&RORU ,GHQWLĂ€FDWLRQ 22 PSIG Yellow 35 PSIG Purple 50 PSIG White 100 PSIG Gray 150 PSIG Red Other Settings Available
230 PSIG 350 PSIG 450 PSIG 500 PSIG
of pressure relief valves is very important. Failure to properly inspect and maintain pressure relief valves could result in personal injuries or property damage. The useful safe service life of a SUHVVXUH UHOLHI YDOYH PD\ EH VLJQLÂżFDQWO\ DIIHFWHG by the service environment.
Blue Orange Pink Light Blue
Flow Performance
‡ 359 DQG 66 VW\OH ÀRZ DW 6&)0 $LU 36,$ DW RI VHW SUHVVXUH ‡ % 1 KDV D ÀRZ RI 6&)0 $LU 36,$ DW RI VHW SUHVVXUH ‡ % 1 KDV D ÀRZ RI 6&)0 $LU 36,$ DW RI VHW SUHVVXUH
Drain Hole Option Relief valves without pipeaway typically provided with drain holes, leave blank. P - for relief valves without drain hole, for example PRV9432TP350
Non ASME Ordering Information Style
Size
PRV SS PRV SS PRV SS BB-
9432 9432 9433 9433 9434 9434 9425 9426
Pressure ,QOHW 0 137 %RG\ DQG 9DOYH Setting Range $ 0DWHULDO PSIG Ÿ� Ÿ� Ǫ´ Ǫ´ ½� ½� ž� 1�
Brass Stainless Steel Brass Stainless Steel Brass Stainless Steel Brass Brass
17-600 17-600 17-600 17-600 17-600 17-600 50-300 75-300
Height B
:UHQFKLQJ +H[ &
2ULÂżFH 6L]H 6T ,QFK
3LSH $ZD\ $GDSWHU 3 1
3LSH $ZD\ 2XWOHW ) 1 3 7
2.6� 2.6� 2.6� 2.6� 2.8� 2.8� 3.4� 5.5�
Ǐ´ Ǐ´ Ǐ´ Ǐ´ Ǐ´ Ǐ´ 1ž� Ǫ´
.062 .062 .062 .062 .062 .062 .43 .62
B-9412-2 SS-9412-4 B-9412-2 SS-9412-4 B-9412-4 SS-9412-4 B-3131-10 B-3132-10
Ǫ´ ½� Ǫ´ ½� ½� ½� 1� 1Ÿ�
ASME Ordering Information Part Number 359 359 359 359 359 359
Inlet $
Height B
:UHQFKLQJ +H[ &
2ULÂżFH 6L]H
Ÿ�
2.6
Ǐ´
.062 sq. inch
Ǫ´
2.6
Ǐ´
.062 sq. inch
½�
2.8
Ǐ´
.062 sq. inch
22 TM
RegOÂŽ - LNG Swing Check Valve 840 & 886 Series Application 840 Series
RegOÂŽ stainless steel and bronze check valves provide an excellent positive shut off for delivery vehicles and pipe lines. Our swing check are available in a variety of sizes, diameters, end connections and pressure ratings. Safe and reliably used in LNG Systems
Features ‡ +LJK &\FOH OLIH DQG VXSHULRU VHDOLQJ ‡ 7KHVH YDOYHV FDQ EH SHUPDQHQWO\ LQVWDOOHG LQ WKH OLQH DQG VHUYLFHV from the top. ‡ 'HVLJQHG WR SUHYHQW EDFN IORZ LQ /1* V\VWHPV ‡ 6L]HV %URQ]H 6HULHV ò´ WR ´ Âą 6WDLQOHVV 6WHHO ò´ WR ´ ‡ (QGV %URQ]H 6HULHV 7KUHDGHG ) 137 6LOYHU %UD]HG 7XEH 6%7 DQG 6&+ 6&+ 6&+ WKUHDGHG EDFN EUD]HG SLSH nipples. ‡ 3UHVVXUH 5DWLQJ &ROG 1RQ VKRFN 6)0 6HULHV 36, EDU Âą &)0 6HULHV 36, %DU ‡ 7HPSHUDWXUH 5DWLQJ ƒ) ƒ& WR ƒ) ƒ& ‡ )DFWRU\ WHVWHG
886 Series
Materials
Materials
6HULHV Âą %URQ]H 6RIW 6HDWHG Body ............................................. Bronze ASTM B61 UNS C92200 Seat Disc ........................................................ PCTFE ASTM D1430 Disc Holder Copper Alloys ASTM B98 C65500 and ASTM B21 C46400 Disc Nut ...................................... Copper Alloys ASTM B98 C65500 Arm ..................................................................... Sil Bronze C87300 Cap ..................................................................... Bronze B61 C9200 Gasket ................................................................. 7)( *ODVV )LOO
0 6HULHV Âą %URQ]H 0HWDO 6HDWHG Body ............................................. Bronze ASTM B61 UNS C92200 Seat ............................................ Copper Alloys ASTM B98 C65500 Arm .......................................... Silicon Copper ASTM B584 C87300 Cap ..................................................................... Bronze B61 C9200 Gasket ............................................................... 7)( *ODVV )LOO
6HULHV ¹ 6WDLQOHVV 6WHHO 6RIW 6HDWHG Body ............................. Stainless Steel ASTM A351 CF3M J92800 Seat ................................................................ PCTFE ASTM D1930 Arm ............................... Stainless Steel ASTM A351 CF3M J92800 Cap ............................... Stainless Steel ASTM A351 CF3M J92800 Gasket ............................................................... 7)( *ODVV )LOO Bolts......................................... Stainless Steel ASTM A320 S30400 *) 6HULHV ¹ 6WDLQOHVV 6WHHO 6RIW 6HDWHG ¹ *UDIRLOŠ Body ................... Stainless Steel ASTM A351 CF8M SA351 CF3M Seat ................................................................ PCTFE ASTM D1930 Arm ........................................... Stainless Steel ASTM A351 CF3M Cap ........................................... Stainless Steel ASTM A351 CF3M Gasket ........................................................................ GTB GrafoilŽ Bolts......................................... Stainless Steel ASTM A320 S30400
0 6HULHV ¹ 6WDLQOHVV 6WHHO 0HWDO 6HDWHG Body ................... Stainless Steel ASTM A351 CF8M SA351 CF3M Seat ......... Stainless Steel ASTM A351 CF3M ASTM A479 S31603 Arm ........................................... Stainless Steel ASTM A351 CF3M Cap ........................................... Stainless Steel ASTM A351 CF3M Gasket ............................................................... 7)( *ODVV )LOO Bolts......................................... Stainless Steel ASTM A320 S30400 0*) 6HULHV ¹ 6WDLQOHVV 6WHHO 0HWDO 6HDWHG ¹ *UDIRLOŠ Body ................... Stainless Steel ASTM A351 CF8M SA351 CF3M Seat ......... Stainless Steel ASTM A351 CF3M ASTM A479 S31603 Arm ........................................... Stainless Steel ASTM A351 CF3M Cap ........................................... Stainless Steel ASTM A351 CF3M Gasket ........................................................................ GTB GrafoilŽ Bolts......................................... Stainless Steel ASTM A320 S30400
Ordering Information Part Number % [[7 % [[6 % 0 [[7 % 0 [[6 6 *) [[6 6 [[6 6 0 [[6 6 0 [[:[ 6 0*) ;;: $
0DWHULDO
Size Range
%RQQHW 7\SH
Bronze
½� to 2�
Union
½� to 1½� Stainless Steel
Ends NPT Silver Brazed NPT Silver Brazed Socket Weld
Seat Soft
Pressure Range PSI 400
PCTFE Metal Soft
Bolted ½� to 4� 2� to 3�
*DVNHW 0DWHULDO
600 GrafoilÂŽ
400
PCTFE Buttweld Socket Weld
%DU
Metal GrafoilÂŽ
23 TM
Limited Warranty and Limitation of Liability RegOÂŽ shall not be liable for incidental, consequential or punitive damages or other losses. RegOÂŽ shall not be liable for, and buyer assumes liability for, all personal injury and property damage connected with the handling, transportation, possession, further manufacture, other use or resale of products, whether used alone or in combination with any other products or material.
TM
/,0,7(' :$55$17< RegOÂŽ warrants products and repair kits manufactured by it to be free from defects in materials and workmanship under normal use and service for a period of 12 months from the date of installation or operation or 18 months from the date of shipment from the factory, whichever is earlier. If within thirty days after buyerâ&#x20AC;&#x2122;s discovery of what buyer believes is a GHIHFW EX\HU QRWLÂżHV 5HJ2Â&#x160; WKHUHRI LQ ZULWLQJ 5HJ2 DW LWV RSWLRQ DQG ZLWKLQ IRUW\ ÂżYH GD\V ZLOO UHSDLU UHSODFH ) 2 % SRLQW RI PDQXIDFWXUH or refund the purchase price of that part or product found by it to be defective. Failure of buyer to give such written notice within thirty days shall be deemed an absolute and unconditional waiver of any and all claims of buyer arising out of such defect. This warranty does not extend to any product or part that is not installed and used in accordance with RegOâ&#x20AC;&#x2122;s printed instructions, all applicable state and local regulations, and all applicable national standards, such as those promulgated by NFPA, DOT, CGA, and ANSI. This warranty does not extend to any product or part that has been damaged by accident, misuse, abuse or neglect, nor does it extend to any product or SDUW ZKLFK KDV EHHQ PRGLÂżHG DOWHUHG RU UHSDLUHG LQ WKH ÂżHOG Except as expressly set forth above, and subject to the limitation of liability below, RegOÂŽ makes NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, with respect to its products and parts, whether used alone or in combination with others. RegOÂŽ disclaims all warranties not stated herein. /,0,7$7,21 2) /,$%,/,7< RegOâ&#x20AC;&#x2122;s total liability for any and all losses and damages arising out of any cause whatsoever shall in no event exceed the purchase price of the products or parts in respect of which such cause arises, whether such cause be based on theories of contract, negligence, strict liability, tort or otherwise.
(8523($1 3(' 73(' &(57,),&$7,21
The following product categories have received PED/TPED FHUWLÂżFDWLRQ E\ WKH QRWLÂżHG ERG\ 7 Y 0D[LPXP PED 9DOYH QXPEHU &RQQHFWLRQ DN &DWHJRU\ Size 9560 series 1â&#x20AC;? 25 SEP 9500 series 1â&#x20AC;? 25 SEP BK8400 series 2â&#x20AC;? 50 II BK9400 series 2â&#x20AC;? 50 II T9450 series ½â&#x20AC;? 15 TPED T9460 series ½â&#x20AC;? 15 TPED 1682 series Âźâ&#x20AC;? 8 SEP BR-&1780 series 1â&#x20AC;? 25 SEP RG series Âźâ&#x20AC;? 8 SEP ECL series Âźâ&#x20AC;? 8 SEP PRV9430 & ½â&#x20AC;? 15 IV PRV19430 series SS9430 & ½â&#x20AC;? 15 IV PRV29430 series
If RegOÂŽ furnishes technical advice to buyer, whether or not at buyerâ&#x20AC;&#x2122;s request, with respect to application, further manufacture or other use of the products and parts, RegOÂŽ shall not be liable for technical advice and buyer assumes all risks of such advise and the results thereof. 127( 6RPH VWDWHV GR QRW DOORZ WKH OLPLWDWLRQ RU H[FOXVLRQ RI LQFLGHQWDO or consequential damages, so the above limitations or exclusions, wholly or partially, may not apply. The portions of this limited warranty and limitation of liability shall be considered severable and all portions which are not disallowed by applicable law shall remain in full force and effect. :$51,1* All RegOÂŽ products are mechanical devices that will eventually become inoperative due to wear, corrosion and aging of components made of materials such as rubber, etc. The environment and conditions of use will determine the safe service life of these products. Periodic inspection and maintenance are essential to avoid serious injury and property damage. Many RegOÂŽ products are manufactured components which are incorporated by others on or in other products or systems used for VWRUDJH WUDQVSRUW WUDQVIHU DQG RWKHUZLVH IRU XVH RI WR[LF Ă&#x20AC;DPPDEOH and dangerous liquids and gases. Such substances must be handled by experienced and trained personnel only, using accepted governmental and industrial safety procedures. 127,&( 72 86(56 2) 352'8&76 7KH /LPLWHG :DUUDQW\ VWDWHG DERYH LV D IDFWRU\ ZDUUDQW\ WR WKH ÂżUVW purchasers of RegOÂŽ products. Since most users have purchased WKHVH SURGXFWV IURP 5HJ2Â&#x160; GLVWULEXWRUV WKH XVHU PXVW ZLWKLQ WKLUW\ days after the userâ&#x20AC;&#x2122;s discovery of what user believes is a defect, notify in writing the distributor from whom he purchased the product/parts. The distributor may or may not at the distributorâ&#x20AC;&#x2122;s option, choose to submit the product/parts to RegOÂŽ pursuant to its Limited Warranty. Failure by EX\HU WR JLYH VXFK ZULWWHQ QRWLFH ZLWKLQ WKLUW\ GD\V VKDOO EH GHHPHG an absolute and unconditional waiver or buyerâ&#x20AC;&#x2122;s claim for such defects. Acceptance of any alleged defective product/parts by RegOâ&#x20AC;&#x2122;s distributor for replacement or repairs under the terms of RegOâ&#x20AC;&#x2122;s Limited Warranty in no way obligates RegOÂŽ to the terms of the above warranty.
Because of a policy of continuous product improvement, RegOÂŽ reserves WKH ULJKW WR FKDQJH GHVLJQV PDWHULDOV RU VSHFLÂżFDWLRQV ZLWKRXW QRWLFH
&DQDGLDQ 5HJLVWUDWLRQ 1XPEHUV The majority of products in this catalog are registered with the Canadian Department of Labor under the following reference 1XPEHU 5HSUHVHQWV )LWWLQJ &DWHJRULHV $ & * + ** Represents Province code number
24 TM
Notes
TM
3181 Lear Drive Burlington, NC 27215 USA Phone (336) 226-3244 Fax (336) 227-6294 Catalog LNG-500 Printed in the U.S.A.
www.regoproducts.com
01-0313-0313