Simple Suggestions for

More

Athactive l[all Iesign Treatmcnts with Douglas Fir Plgwood

No.zofaSedes lllustrated below is another of many wall design treatments possible with Douglas fir plywood. ln this instance. a twopanel treatment is used, with panels in horizontal arrangement. Vertical joints should be used at each side of top of doors and at top and bottom of windows as shown in diggram. In cases where the width of the wall is l0 feet or less, however, panels may be run horizontally with the openings cut out (Note B in diagram). ln all cases, follow this basic rule: start at the openings with vertical joints and divide the plain wall spaces in an orderly pattern for the most pleasing effect. lf spebial patterns, or patterns made up of small panels are desired, the most satisfactory method is to