REDWOOD ANCHORS, BRACES

Using stocfr sizes ond ccorwmbol lcngths and grodes of Col{omn Rcdwood lumber.

insure a tight fence at the ground, I,ine, clear .,f fence line of brush, rocks, stumps, etc., and level ofi minor irregularities before erection.

A "planting stick," with small pegs at either side of hole located before digging, helps materially to get and maintain a true line.

Sixteen feet is average distance between fence posts. Keep size of holes as small as possible, and tamp posts thoroughly, keeping them plumb and in line. Dependent upon soil conditions posts should ordinarily be set about l-3 their length in the ground, and tops should be of a uniform distance above ground.

Wherever gate is to be placed, two end posts, with braces, as indicated, should be provided. If posts are puddled, do not stretch fence until backfill is thoroughly settled.

If wire is used, it should be stretched tightly and stapled to the outside of each post except on sharp "outcurves" where it may be fastened to the inner face of the post.

Heavy wire gives better satisfaction, costs less in the long run, and will ordinarily come nearer giving the . life that may be expected from Redwood posts, braces, etc.

Appearanpe of the fence may be improved by use of paint or stain.

Bottom anchors, as indicated, should be used for posts located in swales or hollows, and well built and properly braced corners and ends, with suitable line braces, are essential for a good fence. Presenteil

"Farm Gates." "Portable Fence Panels" and "I{urdles and Pens" are illustrated in Bulletins Nos. 4. 5 and 6.