A division of hydro-gas couplings cc Reg. No. 2007/07554/23
LUBRICATION SINCE
1963
LUBRICATION EQUIPMENT AND ACCESSORIES Catalogue LH2022
PRODUCT INDEX PNEUMATIC LUBRICATION EQUIPMENT Grease pumps Rollercarts
3 3
HOSE REELS Heavy Duty Series HD 880 Medium Duty Series MD 880
4 4
PNEUMATIC OIL PUMPS Model 88/210 Model 121 / 321 210HC
5 5
HOSEMASTER HIGH PRESSURE CLEANING EQUIPMENT Models HM5/HM 10
6
MANUAL LUBRICATION EQUIPMENT Field Greasers Bucket Pumps Foot-operated Pumps Knapsack Compressors Hand Lever Grease Guns
7 7 7 7 7
ACCESSORIES Hyco Drum Covers and Follower Plates Grease Nipples Grease Cups Spring Feed Lubricators Easy-out Tools High Pressure Guns Connectors Couplers and Adaptors Hoses for Hand Grease Guns Pneumatic Hand Lever Guns Drip Feed Oilers Oil Level Gauges Oil Sight Glasses Oil Decanters Steel/Plastic Funnels Oil Cans Oil Guns Oil Suction and Dispensing Guns POM POM Guns Nozzles Filters Drum Spanner
8 8 8 8 9 9 9 9 9 10 11 11 11 11 12 12 12 12 13 13 13
METERS Oil Meter Digital Flow Meter Diesel Meter Grease Meter
14 14 14 14
ELECTRIC DRUM PUMPS 12v DC Oil Pump 12v DC Fuel Transfer Pump 230V PUMP
15 15 15
MANUAL DRUM PUMPS Semi Rotary “T” Handle Fully Rotary Gear Oil Dispensers Oil Dispensing Trolleys Rollercart 210l/180kg
16 16 16 16 17 17
QUICK COUPLING
18
All Hyco and Hosemaster products are South African designed and manufactured to suit local conditions.
2
PNEUMATIC LUBRICATION EQUIPMENT
Hyco High Pressure, Heavy Duty Grease Pumps Pressure Ratio 50 : 1 Also available 75:1 Ratio
A
STANDARD EQUIPMENT A. B. C. D. E. F.
Air motor High pressure delivery hose 9,6 mm x 2 m and fittings Grease control handle with Z-swivel Grease pump section Automatic oiler Quick release air coupling and insert UP TO: OVERALL HEIGHT
MODELS
FOR GREASE DRUM CAPACITY
88/15 88/18 88/25
15 kg 18 kg 25 kg Imported Drums
660 mm 700 mm
9.2 kg 9.2 kg 9.8 kg varies
340 380
88/50
50 kg
980 mm
10.2 kg
640
88/180
180 kg
1250 mm
11.0 kg
740
WEIGHT KG
INPUT
OUTPUT
DELIVERY
700 kPa
35 MPa
700 g/min
E B F
TUBE LENGTH C
D
Air consumption 0,34 m3/min
SPECIALS
Enquiries are invited for supply of Hyco Grease Pumps differing from the above standard specifications (e.g. for higher pressures, higher grease volumes, etc.).
Hyco Rollercarts
Pneumatic Grease Pumps mounted in HYCO Rollercarts for acceptance of conventional grease drums of 15 and 50 kg capacity. 180 kg rollercart also available. Top/Drum section fits over standard grease drums and is attached to trolley section by three fasteners. Rollercarts can be supplied without pumps. WEIGHT
88/15
27 kg
88/50
33 kg
Pumps are supplied with drawings and parts lists. Replacement parts and service readily available. Made in RSA.
3
HOSE REELS
Hyco Heavy Duty Hose Reels Series HD 880 (1 & 3) FEATURES: • • • • • • • • • •
For workshop use or on field servicing of vehicles For field or workshop use in servicing of heavy equipment Heavy duty clock-type spring with counter-balance action Positive latch and ratchet action Fitted with two self-lubricating ball bearings Circular outlet frame with rollers to eliminate hose wear Complete with 500 mm connecting hose All parts treated against corrosion Rugged construction Spares readily available
MODEL
HOSE SIZE
PURPOSE
MAXIMUM HOSE CAPACITY
HD880/G
9,6 mm
Greasing
20 m
HD880/O
9,6 mm
Oil
20 m
HD880/A
9,6 mm
Air
20 m
HD880/W
12,0 mm
Water
15 m
HD880/D
25,0 mm
Diesel
10 m
DIMENSION
265 mm
580 mm
470 mm
W
H
L
Maximum hose capacity 20 m. Mass (excluding hose) : 29 kg with 20 m hose 36 kg. (Available with open or enclosed reel). Hyco Hose Reels are South African designed and manufactured to suit local conditions.
Hyco Medium Duty Hose Reels Series MD 880 (2) FEATURES:
As HD880 but for lighter applications and space saving. Maximum Hose Capacity: 15 metres Mass (Excluding hose): 29 kg with 15 m hose 34 kg DIMENSION
208 mm
580 mm
470 mm
W
H
L
Grease Pump 88/180 connected to Heavy Duty HD 880 Hose Reel
4
PNEUMATIC OIL PUMPS
Hyco Oil Pumps Model 88/210
A
Pressure Ratio 5 : 1 Also available 10:1 Ratio For fitment to 210 litre oil drums
B
G
STANDARD EQUIPMENT A. B. C. D. E. F. G. H. I.
Air motor Pulsation damper Low pressure delivery hose 9,6 mm x 2 m and fittings Non-drip oil control handle Oil pump section Shut off air eliminator Automatic oiler Quick release air coupling and insert Bunghole adaptor
H I
C
E
PRESSURE (MAXIMUM) INPUT
OUTPUT
DELIVERY
700 kPa
35 MPa
SAE30 8,5ℓ/min SAE90 5,4ℓ/min
AIR CONSUMPTION 0,34 m3/min OVERALL LENGTH
1250 mm
WEIGHT
14 kg
TRANSFER PUMPS Models 121/210HC
D
F
321/210HC
Pressure Ratio 1:1 Pressure Ratio 3:1 These pumps are intended mainly for easy transfer of lubricants from original drums/barrels to other smaller units. The air flow is regulated by a valve. The connection to the air line is easily made through the quick-coupler of the pump. 2 M x 25 mm Hose & Spout.
121/210 321/210
Pump with long pump tube, to be mounted directly in the original drum. Hose and nozzle optional. Weight 7,5 kg.
121 or 321
Pump with short pump tube, for other applications. Weight 4,2 kg.
SPECIALS
Hyco oil pumps can be supplied to meet many applications, e.g. Stub pumps, Volume transfer pumps, for fluids other than oil, etc., etc. Enquiries are invited for any special requirements. All these pumps are made in R.S.A
5
HOSEMASTER HIGH PRESSURE CLEANING UNITS
HOSEMASTER HM 5 & HM 10 Special FEATURES: • • • • • • • • •
D
A
Air Powered High Pressure Cleaning Unit Pressure Ratio: 5 to 1 and 10 to 1 Air input maximum 700 kPa Approx. 3,5 MPa cleaning power (HM 5) Approx. 7 MPa cleaning power (HM 10) Delivery 12,5 l/min both models Air consumption: 0,34 m3/min (HM 5) 0,68 m3/min (HM 10) Power Cleaning - with the chemical solution of your choice Made in RSA
C
B
STANDARD EQUIPMENT
F
Air motor Fluid pump Air-control valve - Optional Air-line oiler and coupling Delivery hose: 9,6 mm ID x 12 m (HM 5) 9,6 mm ID x 12 m (HM 10) Suction hose - 770 mm long Suction filter Spray valve
A. B. C. D. E. F. G. H. I.
WEIGHT COMPLETE
HM 5
19 kg
HM 10
22 kg
H
G
E
HM 5
Mounting bracket supplied with both models. An efficient low cost pneumatic high pressure wash pump for cleaning applications in garages, workshops, as well as in a variety of industries. The units are also very popular for foam injection application with drilling rigs for which it can be supplied as a bare pump only excluding the spray gun and hose - items E and H. Easily portable and by virtue of its standard mounting bracket can be mounted into conventional drums
A D C
B
F
H
G E
HM 10
6
MANUAL LUBRICATION EQUIPMENT
Hyco 2001 Field Greasers 15 kg Hyco 2017 Field Greasers 25 kg Hyco 2022 Field Greasers 18 kg
• • •
•
Hyco 2004 Knapsack Compressors
FEATURES: • •
Designed for field lubrication under the most exacting conditions Strong and rugged Builds up to 42 MPa grease pressure with minimal effort
Pressure - 45 MPa Weight - 12 kg Height - 400 mm
A very useful piece of equipment for servicing nipples situated at a height, as on transformers and similar installations where the operator needs both hands free for climbing. Another use is where lubrication points are widely separated by rough territory, as met in many civil engineering projects such as dams, hydro-electric schemes and aerial ropeways. • Capacity - 5 & 10 kg Pressure - 21 MPa • Weight 10 kg While the field greaser fits the conventional 15 kg grease bucket, all other manual equipment requires decanting of grease. All the above equipment is made in RSA
2001
2002
2003
2004
• •
Fits standard 15 kg pail of grease Alt. 18, 25, 50 kg Supplied with 2 m of high pressure hose, grease nozzle and follower plate • Spares readily available The HYCO 2001 Fieldgun is a portable, hand operated, high pressure dispenser of greases and heavy oils for use in conjunction with a standard 15 kg pail. Lubricant is delivered through a 2 m flexible hose fitted with a rigid tube and hydraulic connector. • Pressure 42 MPa, Weight 8 kg, Height 580 mm Also available Rollercart version 15 and 50 kg
Hyco 2005 and 2012 Hand lever Grease Guns CONTAINER SIZE MM
TOTAL LENGTH MM
CONTENTS
WEIGHT
CM3
CAPACITY PRESSURE PER STROKE PERFORMANCE CM3 E MPA
56,5 dia. x 290
390
500
2
40
1.2
56,5 dia. x 455
550
1000
2
40
1.7
KG
Hyco 2002 Bucket Pumps / 2018 - for 5 kg FEATURES: • • • • • • •
Portable, utility grease pump Capacity - 15 kg Pressure - 42 MPa Supplied with standard follower plate Characteristics similar to Field Greaser, but requires decanting of grease for easy portability Weight 11,5 kg Height 680 mm and 540 mm
Hyco 2003 Foot-operated Pumps
400cc Grease Cartridges for 2005 Filled or Unfilled available
FEATURES: • • • • • • •
A high pressure heavy duty lubricator foot-operated leaving the hands free for lubrication operation No follower plate required Air waves created by spring mechanism Drawing down grease Capacity - 10 kg Delivery - 3 grams per stroke Hose length - 2 metres
7
ACCESSORIES
Hyco Grease Nipples
Hyco Spring-feed Lubricator FEATURES: • • • • • • • •
Quick and easy to recharge Visible indication of grease level Maintenance-free - solid workmanship Maximum lube pressure through effective spring system and sturdy piston No engine stoppage when lubricating Effective in any position - permits manual sampling and quick replacement Environmentally safe and no explosion danger Also available in 400 g and 1 kg
SPECIFICATIONS:
HYCO CODE STRAIGHT TYPE
HYCO CODE
ANGLE TYPE
H1 H1 H1 H1 H1 H1 H1 H1A
1/8” BSP H2 1/8” BSP 45° 1/4” BSP H3 1/8” BSP 90° 3/8” BSP H2 1/4” BSP 45° 1/4” BSF/UNF H3 1/4” BSP 90° 6 mm H2 1/4” BSF 45° 8 mm H3 1/4” BSF 90° 10 mm H2 6 mm 45° H3 6 mm 90° 8Ø Drive in Type H2 8 mm 45° H3 8 mm 90° H1A 6Ø Drive in Type H2 10 mm 45° H3 10 mm 90° H1A 1/4” Ø Drive in Type H3A 8Ø H15 6mm Selftapping Drive in Type 90° Full Range of self tapping threads available on request (popular size listed above)
HYCO CODE
STANDARD BUTTON-HEAD FITTINGS
M1 1/8” BSP Steel M1 1/4” BSP Steel M1 3/8” BSP Steel Above are popular sizes full range stocked including popular oil nipples. Also available in stainless and brass
Hyco Dust Caps For All Popular Nipples
Made in RSA A variety of reducers are available Synthetic grease is recommended. Volume:
approx. 72 cm3
Height full:
200 mm
Outside dia:
67-55 mm
Standard connection:
1/4” BSP
Height empty:
155 mm
Weight:
650 grams
Hyco Grease Cups FEATURES: •
• • • • •
Grease Cups provide one of the most reliable, safest and favourable means of lubricating. A variety of available sizes permits installation anywhere. Quality of workmanship and tolerances ensure high lubrication pressure. Grease is easily absorbed by the bearing on demand. Manufactured from sheet metal protected against corrosion. Available in most conventional threads.
SPECIFICATIONS: 1 SIZE CAPACITY (MIN.) CM3 2,2
DIAMETER MM
15
Drive Tool
8
2
3
4
5
6
7
8
5
10
17
35
50
70
120
20
30
40
50
60
70
80
ACCESSORIES
Connector Couplers and Adaptors
A wide range of connectors in addition to those shown is also available as standard stock items.
High Pressure Guns • • • • •
Grease control handle for pneumatic grease pumps Oil control handle for pneumatic oil pumps Pom-pom oil/grease gun - various nozzles available Mighty Midget hand gun Pneumatic Hand Lever Grease Gun 400cc
2008 M16 FLAT
500/502
2011 500/502H B40
2023
N3600 500/502S
2007 4063
2016
40 M16
2006
Hyco Drum Covers and Follower Plates
Design for use with HYCO grease pump assemblies and available as separate items if required. Suitable for 15, 18, 50 and 180 kg standard grease drums. Made in RSA.
M22
40/M16
200XS
14514
Easy-out Tools
Model No. 70: Removes 7/16” and 3/8” Hex Retaps 1/4” BSF Removes broken 1/8” PT Model No. 80: Removes 5/16” and 3/8” Hex Removes broken and retaps 1/8” BSP - 28 std. thread
Hoses for Hand Grease Guns
300, 500 mm and 750mm with 1/8” BSP male fittings.
9
ACCESSORIES
Drip-feed Oilers ADVANTAGES:
• Number of drops exactly adjustable; instant cut-off • Non-corrosive valve needle • Large filler bowl with dust proof cover • Cylindrical • Brass nickel plated finish • Perspex or natural glass Also available with multiple outlets and solenoid controlled to work in conjunction with equipment cycle. Drips approximately 45 per cc minimum 3 per minute.
SPECIFICATIONS: TYPE NO. UNI 25
THREAD
OVERALL LENGTH
GLASS LENGTH
GLASS DIAMETER
CAPACITIES
INCHES
MM
MM
MM
AVAILABLE CM3
R1/8
80
38
25
10
UNI 30
R1/8
85
40
30
20
UNI 40
R1/4
110
40
40
36
UNI 50
R1/4
120
50
50
78
UNI 60
R1/4
130
60
60
140
UNI 60 x 80
R1/4
150
80
60
200
UNI 80
R3/8
175
100
80
500
UNI 100
R3/8
210
100
100
750
UNI 100x120
R1/2
195
120
100
1 000
UNI 130x150
R1/2
240
150
130
2 000
UNI 150X180
R1/2
270
180
150
3 000
ELO 140
R1/2
150
60
60
140
ELO 500
R1/2
200
100
80
500
ELO 1 000
R1/2
240
120
100
1 000
Current 220V, 50 cycles other variations on request
10
ACCESSORIES
Oil Level Gauges Brass 50 mm (2”) thread 1/4” BSP 80 mm (3”) thread 1/4” BSP 100 mm (4”) thread 1/4” BSP 120 mm (5”) thread 1/4” BSP 150 mm (6”) thread 1/4” BSP 200 mm (8”) thread 1/4” BSP 250 mm (10”) thread 1/4” BSP 300 mm (12”) thread 1/4” BSP
Plastic, brass, aluminium oil sight glasses DIMENSIONS IN MM: THREAD
OVERALL
VIEW
1/4 BSP
20
6
3/8 BSP
24
9
1/2 BSP
28
12
3/4 BSP
35
16
1 BSP
40
22
11/4 BSP
48
28
11/2 BSP
55
33
2 BSP
70
43
Oil Decanter – Steel/Plastic
Model No. 180 • Made from heavy duty tin • Welded handle • Three external measuring lines • For use with mineral oil only SIZE
1
2
3
4
6
CAPACITY L
0,50
1,00
2,00
2,50
5
MASS G
190
295
425
550
1300
Funnel – Steel/Plastic Model 200 - 202 • • •
Made from heavy duty tin, with rolled edge Locking clip to secure sieve Welded-on handle
SIZE
1
2
3
4
5
OVERALL DIA. MM
160
180
200
220
240
MASS G
290
310
335
400
445
11
ACCESSORIES
Oil Can
Model No. K 500 • • •
Rigid, seamless drawn, steel container Finished in baked lacquer With dual purpose spout double ball brass pump with steel oil can capacity 500 ccm.
Oil Gun
Model 70/PKO Purpose designed for oil with special seals capacity 500 ccm
Oil Suction and Dispensing Gun
Model SDF 4 Suitable for suction and dispensing of various liquids available with metal or transparent hose dispensing pipes. Capacity 1000 ccm Model SDF3 Capacity 500 ccm
POM POM Guns 2010 STEEL 300ccm 2010 L STEEL 335ccm 2010 S SHOCK RESISTANT POLYAMIDE 70ccm
2010 12
2010 L
2010 S
ACCESSORIES
Nozzles
NH58013 1” 25mm Manual NH58113 1” 25mm Automatic
AIR REGULATOR FILTER & GAUGE ¼”
FILTERS 1”
GZFF 1 FUEL FILTER COMPL
GZFF 1 CARTRIDGE
GZFR ¼
DRUM SPANNER FOR 210L DRUM
13
METERS
Oil Meter (24790) Functions:
• For oil and glycol • 4 digit display • Resettable trip meter • Non resettable totaliser • Easy calibration (accuracy 0,5%) • Simple battery change Technical Data Working pressure: (0,5-70 bar, 8-1000 psi) Temperature range: 0oC to +55oC Accuracy: < 0,5% (after calibration) Battery: 2 x LR03 Alkaline - 7000 hours average life
Preset Digital Hose end Meter (24712)
A digital volume meter which is microprocessor based and ergonomically designed. A safety lock prevents accidental operation of the trigger as a locking button must be depressed before the trigger can be released. The trigger can be locked in the open position and then closed by a light upward pressure.
Digital Flow Meter (NH58087) Working pressure max 300psi Flow: 20-190LPM Aluminium housing-AAA battery
Diesel, Biodiesel, Light Oil Meter, 3 wheel (NH58081) Working pressure:max 50psi Flow: 20-75LPM Aluminium housing resettable 6 digit non resettable totalizer
Diesel, Biodiesel, Light Oil Meter, 4wheel (NH58082) Option Four digit counter version 20 - 120L/min. 1” BSPF ports. Ideal for pumped systems Max. pressure 10bar Accuracy of ±1% with adjustable calibration Aluminium housing & cover 6 digit non resettable totalizer
Grease Meter (14710)
Digital grease meter, equipped with current dispense display and resettable and non-resettable totalizer. Digital display powered by two 1,5 V AAA batteries. Max working pressure 50 MPa(500 bar). Max flow 1000gr/min. Accuracy +/- 3 %
14
ELECTRIC DRUM PUMPS NP58070
12v DC Oil Pump
NP58020
12v DC Fuel Transfer Pump
Up to 40 LPM (12 volt)
12V,1/4HP DC MOTOR;CURRENT: 15A Flow Rate up to 76LPM;
Box contents:
• • • • • •
OD 230
230V
Pump 1pc 3-Wire Battery Cable Pipe (56cm-100.5cm) 1pc Hose Fittings 1pc Teflon Tape 1Roll Owner’s Manual 1pc
PUMP 40 L/min
Product Features • Vertical mount Fuel & Oil pump designed for Indoor use in Industrial, Automotive, Heating & Marine applications. • For use with non-flammable media • Pumps have built in Bung Adapter to fit directly onto drums with a 2” threaded opening. • Manufactured from chemically inert materials; these pumps work with a wide variety of low viscosity media. Pump motor has double insulation which makes them safe for use with water & emulsions. • Built-In Anti Siphoning system ensures that media does not flow out by Siphon action in case of accidental damage to the delivery hose or dispensing nozzle • Duty Cycle: Continuous Duty WETTED COMPONENTS POM, Polypropylene, Stainless Steel, Nitrile Rubber, Viton & PTFE RECOMMENDED USE Diesel, Kerosene, Mineral & Synthetic Oils, Heating Oils, Antifreeze, Water, Emulsions etc.
15
MANUAL DRUM PUMPS
Hyco Hand-operated Pumps Semi-rotary Wing Pumps (1) FEATURES: • • • •
1
High output - various models deliver from 15 to 105 litres per minute Models available in six different sizes and capacities pumping to different heads Flexibility of application - can be mounted onto drums, tanks or in-line piping systems Simplicity of design ensures maintenance-free operation
APPLICATIONS:
High capacity pumping of a wide variety of oils, fuels and other liquids. TYPE YL-0 YL-1 YL-2 YL-3 YL-5 YL-7 Suction discharge - mm Practical reciprocating speed strokes/mi Capacity with head and suction 1 m - l/min Maximum head - m Maximum suction lift - m Mass - kg
13 104
18 94
25 88
32 82
38 72
50 56
15
22
28
40
85
105
26 4 4
28 4 5,5
30,5 4,5 6,5
20,5 4,5 7,5
15 5 15
15 5 28
Hyco `T’-handle Pumps 2020 (2)
Made in RSA Material: Mild steel or stainless for chemicals Capacity: 0,5l/stroke; 20 - 25l/min Weight: 6 kg Dimensions: 1070 mm x 90 mm OD
Hyco GEAR OIL PUMP 2021 (3)
2
Measured stroke Weight: 8.5 kg
Hyco MS Series (4) FEATURES: • • • • •
Fully rotary and reversible operations Spring loaded rotor blades for positive displacement 2” BSP bung adaptor for drum mounting Rigid suction tubes available in standard or special lengths Spares and service readily available
APPLICATIONS:
High capacity pumping of a wide variety of oils and liquids. SPECIFICATIONS
MS25
Suction lift Total head Capacity Mass Overall length Operating rotation Discharge diameter -
1.5 5.5 20 4.6 kg 1.3 70r/min 25
Range of chemical hand pumps not listed
16
3
4
MANUAL DRUM PUMPS
Hyco 2009 Gear Oil Dispensers FEATURES: • • • • • • •
Adjustable rotary action for controlled delivery Smooth operation combined with positive displacement Sturdy construction and pleasing design Handles from the lightest to the heaviest gear oils Capacity 15 litres 1,5 m long delivery hose with bent tip nozzle Output Maximum 2.5 turns = 350 ml Minimum 1 turn = 100 ml • Long lasting, maintenance free life • Weight - 8.2 kg • Made in RSA • Height - 680 mm In addition to drum pumps displayed, many more models are available ex-stock.
CMP 12
Manual Chemical Drum Pump
Hyco RK180
Rollercart for 210l or 180kg drums Weight - 35 kg Handle removable for transport
Oil Dispensing Trolleys 50 or 100 ℓ Normal or Wheelbarrow Wheels
17
QUICK-COUPLING
MALE THREAD 1/4”
HOSE ø
PART NO
1/4” 5/16”
48510 48511
3/8”
48512
MALE
1/8” 1/4” 3/8”
FEMALE
FEMALE THREAD 1/4” 3/8”
44516 HOSE CONNECTOR
HOSE ø
48540
5/16”
48541
3/8”
48542
1/2”
48543
3/8”
MALE THREAD
MALE
44521 HOSE ø
PART NO
1/4”
48603
3/8”
48600
1/2”
48601
3/4”
48602
1/2”
PART NO 48503 48504
3/8” 1/2” 3/4”
48603 48600 48601 48602
PART NO 48594 48530 48590 48592
PART NO 48531 48591 48593
HOSE CONNECTOR PART NO HOSE CONNECTOR
44531
TECHNICAL DATA:
QUICK COUPLINGS
MATERIAL:
Shut-off Valve- Brass Seal- Nitrile Rubber Body and Sliding Cover- Brass Other Parts- Steel
FINISH:
Zinc Plated, Blue Chromated
MAX. WORKING PRESSURE:
1.4MPa, (14 bar, 200 psi)
AIR VOLUME PER MINUTE:
1350 l. at 6 bar (44516)
(FREE STANDING)
2500 l. at 6 bar (44521) 2800 l. at 6 bar (44531)
18
1/4” 3/8” 1/2” 3/4”
FEMALE THREAD FEMALE
48500 48501 48502
HOSE CONNECTOR PART NO 1/4” 3/8” 1/2” 3/4”
PART NO
1/4”
PART NO
1/4” 5/16” 3/8” 1/2”
48550 48551 48552 48553
NOTES:
In line with our policy to constantly improve our products, specifications printed in this catalogue are subject to change without prior notice.
“HOSEMASTER”, “HYCO” and “LUBECONSULT” are registered trademarks of HYDROGAS COUPLINGS (PTY) LTD Catalogue 1/2013
19
A division of hydro-gas couplings cc Reg. No. 2007/07554/23
41 Kabeljou Road, Wadeville Ext 2. 1407 P O Box 14562, Wadeville 1422 Tel: (011) 824-4280/1/2/3 A/H Craig 082 446 0288/93 E-mail: sales@hyco.co.za Alt. E-mail: admin@hyco.co.za
