Father’s Day eBook 2021
Customer Service 1300 836 522
5 Father’s Day craft ideas for Dad!
Father’s Day is on Sunday the 5th of September 2021.
Contents
3D Dad Clock............................................................................................... 3 Origami Fortune Cookie Crate..........................................................4-5 Dad You ROCK Rocker............................................................................ 6 Dad of Steel Card....................................................................................... 7 Make Your Own Beard............................................................................. 8 Templates................................................................................................ 9-10 We’ve supplied FREE templates just for you! Print as many times as you like.
Father’s Day Catalogue out now! Design Your
Finished example
Own Tape Me
asure
Design a Tra vel Mug
I’m a great size with a handy clip & wrist stra p. Dad can take me anywhere !
Finished exam
ples
FREE TEMPLATES
Includes a paper stick er for you to decorate!
res
$4.99
Colour Your
SAVE
30%
n Gifts
sure – 3 Met
when you buy in bulk!
Own Whoop
ee Cushion Design a Trav el Mug
Finished examples
18515
Each 50 or more 100
$3.99
$3.19 or more Reusable plast ic $2.39 for you to crea travel mug. Includes deta chable small te. Decorate lanyard and the plain insert Measures 6.5 plain paper x 17cm. Colo or add a temp insert. Plain urs will vary. late insert. Hand Scan QR Code wash only. 330m above for FREE l. templates!
FREE TEMPLATES
for great mes s free fun!
Colour Your
19962
Own Whoope
Each 50
www.cleve
2
d 5
Finished example
Great for fun laughs on Father’s Day and beyond!
e Cushion
$4.99 Pre-printed desigor more n on the front $3.49 markers (ava and plain for ilable online – 19886) to comp you to create on the back Measures 16 x 21cm. Adult . Use permanen lete supervision recom your design. Allow to t dry for 24 hours mend ed for children Order online before use. under 8.
FD2021_FINAL.ind
SAVE UP TO
40%
when you buy in bulk!
rpatch.com.a
u
SAVE
30%
when you buy in bulk!
Design a Pen – Pack of 10 Each
18435
pack 6 or more pac ks 12 or more
$19.99 $15.99
packs Includes plain paper insert $11.99 for you to deco Scan QR Code rate. Measures above for FREE approximately templates! 14.5 x 1cm.
Prices exclude GST
SAVE UP TO
Size may vary.
40%
CRAFT - De sign Your Ow
Own Tape Mea
Each 50 or
more 3 metre mea suring $3.49 and thumb contr tape with plain pape r sticke ol tape lock. Measures appr r for you to decorate. Inclu oximately 6 des wrist strap x 3.5 x 6cm. , belt clip Colours may vary.
FATHER’S DA Y
Design Your
19939
for great mes s free fun!
when you buy in bulk!
© CleverPatch 2021
FREE FREIGH s T for all ord ers over $25 0 (ex GST)
5
16/6/21 4:13 pm
3D Dad Clock Materials: • Wooden Clock Face – 25cm – 12484 • Clock Mechanism – 18150 • Wooden Tool Shapes – Pack of 48 – 13270 • Wooden dad Plaques – Pack of 20 – 12767 • CleverPatch™ Acrylic Paint Tube – White 75ml – 16886 • CleverPatch™ Acrylic Paint Tube – Light Blue 75ml – 16881 • CleverPatch™ Acrylic Paint Tube – Silver 75ml – 16887 • CleverPatch™ Acrylic Paint Tube – Orange 75m – 16878 • CleverPatch™ Junior PVA Glue – 250ml – 10364 • Clock Movement Mechanism Hanger – 19304 • Other Materials Required: Paint brushes and splash mat or scrap paper.
It’s time to make Dad a gift he’ll love!
1. Protect your area with a splash mat or scrap paper. Pair up the tools and dad plaques. You will need 2 of each piece.
2. Apply glue to each base piece and stick the matching piece on top. Allow to dry.
3. Paint each piece white. This will act as a base coat and enable the top coat of colour to be more vibrant. Allow to dry.
To hang, attach a Clock Movement Mechanism Hanger to the back!
4. Paint your pieces any colour you like. We have chosen light blue for the clock face and a combination of silver and orange paint for the tools. Allow to dry. Arrange your painted pieces on top of the clock face. © CleverPatch ™ 2021
5. Place the second hand of the clock mechanism in the centre of the clock face and rotate it around, ensuring it is not obstructed by any of the wooden pieces. Once you are happy with the arrangement, glue each piece to secure. Allow to dry.
6. Follow the instructions on the box to attach your clock mechanism to the clock face. If you’d like your clock to hang on a wall, attach a clock movement mechanism hanger to the back. Your 3D Dad Clock is now ready to gift to Dad! 3
Origami Fortune Cookie Crate Materials:
• 3D Wooden Crate – 19692
• Paper Raffia – Orange – 50 Metres – 12387
• CleverPatch™ Origami Paper – Pack of 100 – 19261
• CleverPatch™ Acrylic Paint Tubes – 75ml Set of 14 Colours – 19855
• CleverPatch™ Junior PVA Glue – 250ml – 10364 • Double Sided Tape – 6mm x 50m Roll – 19162
• Other Materials Required: Template (page 9), pencil, paint brushes, scissors, hole punch and scrap cardboard.
1. Print out the templates on page 9. Cut out the square around the circle template. Adult supervision is recommended when using scissors. Apply glue to the back of the template then stick it onto a piece of scrap cardboard. Allow to dry.
2. Cut the circle out of the cardboard. This template can now be used to trace circles onto your origami paper. Trace and cut out as many origami circles as you would like.
3. Write lovely notes for Dad on the rectangles from the template on page 9. Carefully cut each strip out.
4. Bend the origami paper circle in half with the coloured side facing out and gently pinch the centre to create a small fold.
5. Place a 2cm piece of double sided tape perpendicular to this fold.
6. Fold the circle in half on the opposite side and place a note inside.
7. Remove the paper backing from the double sided tape. Hold the fold together as shown, then gently push in the pinched fold created in step 4.
8. The fortune cookie will form once the paper folds in on itself. The tape will help keep the cookie in shape.
9. Repeat steps 4-8 to make enough origami fortune cookies to fill the crate. We made 18 fortune cookies.
4
© CleverPatch ™ 2021
Fill these fortune cookies with things you’ll do for Dad and notes telling him why he’s the best!
10. To construct your crate, attach the 2 large side pieces to each end of the base. Insert the 2 bottom side slats into the mounted sides then repeat with the 2 top side slats.
11. For permanent assembly, apply glue to each join. Allow to dry.
12. Decorate your crate using vibrant acrylic paints! Allow to dry.
13. Cut out the tag template from page 9, or you can create your own. Use a hole punch to create a hole at the top of the tag.
14. Attach the tag to the crate using raffia. Fill the crate with your origami fortune cookies.
15. Your Origami Fortune Cookie Crate is now ready to gift to Dad!
© CleverPatch ™ 2021
5
Dad You ROCK Rocker Materials:
Make Dad feel like the Rockstar he is!
• Paper Plates – Small Pack of 50 – 16601 • CleverPatch™ Glue Stick 40g – 13974 • CleverPatch™ Triangular Maxi Coloured Markers Pack of 10 – 16523 • Super Hero Stickers Pack of 240 – 18373 • Cardboard – White – A4 Pack of 100 – 16288 • Other Materials Required: Template page 10, pencil and scissors.
1. Print out the template on page 10. Use markers to colour in the 2 semicircles then cut them out. Adult supervision is recommended when using scissors.
2. Print out a picture of your Dad’s face. We recommend it be around 25mm high. Cut around Dad’s face making sure you keep all of his features. Cut out the body template on page 10. Glue your Dad’s face onto the body template. Allow to dry.
3. Decorate the body template to reflect what your Dad would wear. We have used markers and stickers. Glue your Dad figure onto a piece of cardboard. Allow to dry. Cut out your Dad figure using scissors.
4. Mountain fold a paper plate in half. Decorate one side of the plate then glue the Dad You Rock template from step 1 onto the front. Allow to dry.
5. Open the folded plate and glue the Happy Father’s Day template on the inside. Allow to dry. You can also decorate the inside if you wish.
6. Apply glue to the base of your Dad figure where indicated and attach it to the back of the plate along your fold. Your rockin’ Dad Rocker is now complete and ready to gift!
6
© CleverPatch ™ 2021
Dad of Steel Card Materials:
• Bolt Keyring CleverKit – 19358 • Cardboard Greeting Cards – White – Pack of 20 – 10609 • Felt Sheets – Red – Pack of 10 – 17530 • Soft Yarn – Red – 100g – 11306 • CleverPatch™ Cover Paper Assorted – A4 – Pack of 275 – 13652 • Wiggle Eyes Black – 0.7cm – Pack of 100 – 16477 • CleverPatch™ Glue Stick – 40g – 13974 • Sewing Needles – Blunt Tip – Pack of 25 – 11591 • Other Materials Required: Template (page 10), ruler and pencil. ™
A card and gift in one!
1. Start constructing your CleverKit™. Screw a hex nut onto the hex bolt all the way to the top. Measure and cut 2 x 20cm pieces of red yarn. Adult supervision is recommended when using scissors. Tie the centre of one piece of yarn onto the hex bolt.
2. To make the cape, measure and mark 5cm in from each side of the felt sheet corner. Using a lead pencil, join both marks to form a triangle. Cut along the drawn line.
3. Fold the triangle in half, then create a small cut at the top part of the fold. Thread the cape onto the hex bolt until it reaches the red yarn piece.
4. Screw the wing nut with split ring (wings up) onto the hex bolt until it reaches the cape. Screw on the next two hex nuts so that they are touching. Tie the centre of the remaining piece of red yarn onto the hex bolt. Screw on the last wing nut (wings down).
5. On an A4 sheet of coloured cover paper, measure out a piece that is 95 x 138mm then cut it out. Apply glue to the back of this piece and attach it to the front of the card. Allow to dry.
6. Position your man of steel on the front of the card and using a pencil mark out 4 dots, one above each arm next to the body and one above each leg next to the body. Puncture each of these marks with a blunt tip needle. Adult supervision is recommended.
7. Place your man of steel back onto the card. Use the needle to thread one of the yarn strands from the top of your man through the corresponding puncture mark on your card. Repeat with the 3 other strands. Tie the top strands together on the inside of your card. Repeat with the bottom strands. Trim any excess yarn. Glue 2 wiggle eyes to the top hex bolt. Allow to dry.
8. Print and cut out our Father’s Day quote on page 10 and glue it to the front of your card. Allow to dry. Your Dad of Steel Card is now ready to write in and gift!
© CleverPatch ™ 2021
7
Make your Own Beard Materials:
• Felt Sheets – Brown – Pack of 10 – 17538 • Artline70 Permanent Marker – Black – 12996 • Soft Yarn – Brown – 100g – 17137 • Clear Sticky Tape – 18mm x 66m – 17769 • CleverPatch™ Tacky Glue – 250ml – 16494 • Elastic – White – 10 Metres – 19747
A great beard that doesn’t have to grow on you or Dad!
• Other Materials Required: Scissors
1. Hold a felt sheet under your nose and wrap it around the bottom half of your face. Use a permanent marker to trace over your jawline, marking it on the felt, then do the same with your mouth. Use these guides to cut out a ‘beard’ shape. Adult supervision is recommended when using scissors. Cut small holes in each side of your felt as shown.
2. Cut a 2m length of yarn and continuously loop it loosely around 2 fingers. Remove and spread out slightly, taping along the top to hold the row of loops together as shown.
3. Add a line of tacky glue along the bottom of the felt piece and press the sticky taped edge of the looped yarn row onto the glue.
4. Create 2 more looped yarn rows and attach above the first row in the same way. The yarn should overlap slightly so it is covering the taped edge underneath.
5. When attaching the row of looped yarn below the mouth area, do not use sticky tape as there will be nothing above to cover it. Carefully glue straight onto the felt instead.
6. Continue to layer and glue rows of looped yarn until the felt piece is covered, making sure the final row along the top is glued in place without using tape. Allow to dry.
7. Once completely dry, cut all of the looped ends of yarn. Use your fingers to fluff up the yarn and then trim the yarn beard as needed.
8. Finish the beard by tying a length of elastic to the holes created in Step 1. Try the beard on and adjust the elastic as needed. Wear your beard with Dad as you celebrate Father’s Day!
8
© CleverPatch ™ 2021
Fortune Cookie Template Use these templates to help you complete the activity on pages 4 & 5.
© cleverpatch™ | cleverpatch.com.au
Dad is the best because
© cleverpatch™ | cleverpatch.com.au
Dad is the best because
Dad is the best because
Dad is the best because
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
Voucher for:
© cleverpatch™ | cleverpatch.com.au
Voucher for:
Voucher for:
Voucher for:
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
I’m so fortune–ate to have you as my Dad!
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
© CleverPatch ™ 2021. Subject to terms of use at www.cleverpatch.com.au
9
Dad You ROCK Rocker Use these templates to help you complete the activity on page 6.
© cleverpatch™ | cleverpatch.com.au
© cleverpatch™ | cleverpatch.com.au
Glue here © cleverpatch™ | cleverpatch.com.au
Dad of Steel Card Use this template to help you complete the activity on page 7.
You are my Dad of Steel! © cleverpatch™ | cleverpatch.com.au
Word Search S G J
B
T
S
F
Z M D G A M E
A C N O
I
N
T
A C A M P
I
I
H O
I
B
K
T
R
E A
K
L O B
F
J
I
S O H
S N Q W P
R G N B
S
T
R O O D
P A P
10
T
L
Z
D G R P I
F
E
R D C
N G U V M O M T
N O N C O
F
T G R A N D P A V
E
K O T W Y
U O G N S
S Q S W
S
R G U
M M
I
P
R
I
I
E G L O V
E
N G Q H U M S
BBQ
FUNNY
MOVIES
SWIMMING
BIKING
GAMES
OUTDOORS
TOOLS
CAMPING
GRANDPA
POP
DAD
GREAT
SPORTS
FATHER
LOVE
SURFING
© cleverpatch™ | cleverpatch.com.au
© CleverPatch ™ 2021. Subject to terms of use at www.cleverpatch.com.au