THE UTILITY EXPO PREVIEW Products
Following is a sampling of products available from companies exhibiting at The Utility Expo, September 28-30, in Louisville, KY. Additional products from exhibiting companies can be found throughout this issue. Access the full list of exhibitors at www.theutilityexpo.com.
Geotab GO RUGGED Fleet Tracking Device This scalable, flexible and customizable off-road fleet solution can capture rich data on equipment position, fuel use, idling and more. • Delivers accurate intelligence for real results • MyGeotab fleet management platform integrates with AEMP and third-party devices • IP67-rated device with LTE connectivity lets you monitor assets out on the worksite in real time • Manage both off-road and on-road assets together • Open platform and Marketplace offer a variety of third-party solution options
www.ForConstructionPros.com/21093316
VMAC Stacked G30 Air Compressor
Ditch Witch HX30G Vacuum Excavator The low-profile HX30G is powered by a 31-hp Vanguard gas engine for optimal suction power and water pressure. • Equipped with a 542-cfm blower, 3,000psi water pressure and 4.2-gpm water flow • Choice of a 500- or 800-gal. tank for a variety of job requirements • Available trailer configurations include the VT9 trailer that does not require a CDL when equipped with the 500-gal. tank • Optional jib boom provides a wide range of motion • Hose storage system stores hose flat and straight inside the unit’s frame
www.ForConstructionPros.com/21105621
Venturo Workforce Packages The commercial vehicle upfitting program has been extended to include Workforce service body packages, including Workforce25, Workforce45, Workforce55 and Workforce66. • Available in a variety of configurations and options ranging from 10,000- to more than 33,000-lb. GVW chassis • Telescopic service crane options from 5,000- to 11,500lb. max capacity, 25,000- to 66,000-ft.-lb. ratings and from 25- to 30-ft. hydraulic boom extension • Include the VLC Crane Control System and BOSS BA440 air compressor • Installed, tested and fine-tuned by technicians to exacting factory specifications
www.ForConstructionPros.com/21615243
The stacked G30 rotary screw gas-driven air compressor produces 30 cfm at 100% duty cycle and includes a 30-gal. air receiver tank, yet weighs under 210 lbs. • Footprint of just 2.5 sq. ft. at 38 in. tall, 20.5 in. wide and 18.15 in. deep including the belt guard • Fits neatly into the existing rear compartment of most service trucks or in the bed of a pickup truck • Powered by a Honda GX390 air-cooled, four-stroke OHV engine that is EPA and CARB compliant and includes a 1.6-gal. fuel tank • High duty cycle eliminates the need for a large air receiver tank
www.ForConstructionPros.com/21110946
Vermeer PTX42 Walk Beside Plow/Trencher The PTX42 plow/trencher features pivoting hand controls that can be moved from one side of the machine to the other to give the operator greater flexibility. • Plow offers a maximum depth of 24 in. and trencher cuts a maximum of 42 in. deep and 6 in. wide • 46.8-hp Kubota WG1605 gasoline engine and planetary axles help reduce stress and torque going to the driveline • Center-articulated design oscillates at the point of articulation • Electronic creep control helps to optimize performance on longer distance installations
www.ForConstructionPros.com/21090062
Fecon FTX150-2 Mulching Tractor The FTX150-2 features a Cummins 3.8L Tier 4/Stage V engine that delivers 10% more horsepower (155 peak hp). • Power Management system automatically monitors and maintains power for max production in various conditions • Hydraulic system provides 60 gpm with a dedicated circuit to the attachment • Includes high-strength steel construction, a more open engine compartment with large service doors and a cooling system designed for mulching • Spacious cab with enhanced operator visibility, in-cab adjustable flow with presets and a 7-in. touchscreen IQAN display • Standard rear view camera
www.ForConstructionPros.com/21342472
WE KEEP
COME SEE US AT THE UTILITY EXPO! BOOTH E1027
AMERICA
ON TRACK
UTILITY CARRIERS
54 EQUIPMEN T TOD AY | September 2021
800-365-7260
Stellar TMAX 1-11 Welder Body
|
morookacarriers.com
www.ForConstructionPros.com
The TMAX 1-11 Welder Body features a 30-in. workbench bumper enhanced with a slide-out tray, providing an on-demand workstation that is ready for torch cutting and welding. • Tray’s removable support slates allow for blow-through to the ground to keep the workspace clean • 2-in. V-channel runs the length of the bumper for easy clamping • Body uses stainless steel billet-style hinges, three-point stainless steel compression latches and double-spring over-center door closures • Set up for any TC Series crane
www.ForConstructionPros.com/21319184
