Service And Quality Is Never An Accident, It Is Always The Result Of Intelligent Effort
PO-1193-SES-011-003
Service And Quality Is Never An Accident, It Is Always The Result Of Intelligent Effort
Established in 2011, Subsea Energy Solutions are your global partner for offshore cable and SURF protection systems
3
Product Finder SUB-BALLAST™ Cable Ballast Modules
Page 8-9
SUB-BOX-C™ Cobra Head Spacing Boxes
Page 18
SUB-BSR-D™ Bend Stiffeners Dynamic
Page 12-13
SUB-BSR-S™ Bend Stiffeners Static
Page 14-15
SUB-BUNG-OWF-S™ Subsea Diver Installed Bungs
Page 10
SUB-BUNG-OWF-T™ Topside Grouting Bungs
Page 11
SUB-BUOY-SBM™ Subsea Buoyancy Modules
Page 16-17
SUB-BUOY-SMB™ Subsurface Mooring Buoys
Page 19
SUB-CENTRALISER™ J-tube Centralisers
Page 20-21
SUB-CLAMP™ Subsea Clamps
Page 22-23
SUB-CLAMP-SWIVEL™ Swivel Subsea Clamps
Page 28
SUB-DUCT™ Cable Protection Systems
Page 24-25
SUB-EQD™ Emergency Quick Disconnect Systems
Page 26
SUB-FAIRINGS™ Lower & Upper Tether Fairings
Page 27
SUB-FEND™ Hose & Flange Protections
Page 29
SUB-FLEX™ Cable Protection Systems
Page 30-32
SUB-GASKET™ Nacelle Gaskets
Page 38
SUB-HANG™ Topside Hang-Off Clamps
Page 34-35
4
Product Finder
(cont’d)
SUB-HEAD-F™ Pull-In Heads Flexible
Page 36
SUB-HEAD-R™ Pull-In Heads Rigid
Page 37
SUB-LINK™ Buoyant Vertebrae Bend Restrictors
Page 39
SUB-PIGGY™ Piggy Back Clamps
Page 40-41
SUB-PENETRATOR™ Cable Penetrators
Page 43
SUB-PIP™ Pipe-In-Pipe-Water Stop Seals
Page 48
SUB-ROLLERS™ Cable Management Systems
Page 42
SUB-SEAL™ J-tube Seals
Page 46-47
SUB-SRJ™ Subsea Repair Joints
Page 44-45
SUB-STAB™ Subsea Hotstabs
Page 49
SUB-VBR™ Vertebrae Bend Restrictors
Page 50-51
SUB-VSS™ Vortex Shedding Sleeves
Page 33
High Pressure Inline Swivels
Page 52
Rotary Unions For Hose Reels
Page 53
Rental Equipment
Page 54
Bespoke Machining & Fabrication
Page 55
General Services
Page 56
5
Subsea Energy Solutions are extremely proud to
innovative, flexible and fast paced team will
service the global industries of Oil & Gas, Fixed
endeavour to meet any project and schedule
Offshore Wind, Floating Offshore Wind, Marine
demands by drawing upon the wide range of in-
Energy (Wave, Tidal & River), Mining & Nuclear
house experience and in-house services.
sectors.
Our mission is to consistently deliver on schedule
We are certified to ISO 9001 : 2015, which means
and on budget allowing us to meet and exceed
that you can be assured of our commitment to
our clients ever increasing expectations by
high quality products and services.
providing an unrivalled service and purchasing
Our unique one-stop-shop provides project
experience.
management, innovative design, in-house
You can be fully assured that Subsea Energy
manufacturing, equipment assembly, load and
Solutions understand the problem, Subsea Energy
pressure testing and onshore and offshore
Solutions shall engineer the solution and Subsea
commissioning. We are able to provide everything
Energy Solutions shall deliver the service, time
from stock items to bespoke topside and subsea
and time again.
equipment.
At Subsea Energy Solutions, service and quality
Subsea Energy Solutions in-house services
is never an accident, it is always the result of
include polyurethane and buoyancy processing,
intelligent effort.
machining and fabrication (coded welders), load and pressure testing services, onshore and offshore commissioning, combined with ongoing servicing and maintenance programmes.
Philip A. R. Stanyon
Our senior management have together over
Founder & Commercial Director
100 years of experience within the oil & gas and
Certificate Number 10284 ISO 9001
Subsea Energy Solutions Ltd. (Est. 2011)
renewable energy sectors and our dynamic,
6
www.subenesol.co.uk
Industry Sectors Oil & Gas
Fixed Offshore Wind
Floating Offshore Wind
Wave & Tidal Energy
Mining
Nuclear
7
www.subenesol.co.uk
SUB-BALLAST™ Cable Ballast Modules SUB-BALLAST™ Cable Ballast Modules are utilised on-board cable installation vessels during the omega lay deployment of SUB-SRJ™ Subsea Repair Joints. The SUB-BALLAST™ Cable Ballast Modules provide a counter-balance weight during the over boarding and deployment of SUB-SRJ™ Subsea Repair Joints. PO-1993-SES-005-015
In addtion, SUB-BALLAST™ Cable Ballast Modules are also installed upon light weight Thermoplastic Composite Pipes (TCP) to increase the TCP on-bottom stability
PO-1993-SES-006-009
coefficient / on-seabed stability coefficient. Furthermore, SUB-BALLAST™ Cable Ballast Modules can also be used in other subsea operations where an increase of submerged mass is required to providing increased subsea stability.
KEY FEATURES •
Exact submerged weight
•
Modular split design
•
Rapid installation
PO-2194-SES-004-025
PO-1993-SES-007-004
8
www.subenesol.co.uk
SUB-BALLAST™ Cable Ballast Modules
PO-1382-SES-004-004
PO-2040-SES-008-001
PO-1993-SES-007-003
PO-1993-SES-006-009
9
www.subenesol.co.uk
SUB-BUNG-OWF-S™ Subsea Diver Installed Bungs SUB-BUNG-OWF-S™ Subsea Diver Installed Bungs are utilised to provide an enviromental seal within monopile J-tubeless cable entry holes, during monopile glacial rockbed under reaming drilling operations. A very special thankyou to Mike Bailey for your trust and belief in Subsea Energy Solutions and for the award of Subsea Energy Solutions first project in early 2012. From little acorns, mighty oaks do grow. KEY FEATURES •
Variants for drilled and non-drilled monopile locations
•
Diver intervention internal monopile
PO-101-SES-010-002
PO-101-SES-010-001
pressure monitoring system •
Rapid installation, activation & removal
PO-101-SES-006-010
PO-186-SES-002-012
PO-186-SES-002-032
10
www.subenesol.co.uk
SUB-BUNG-OWF-T™ Topside Grouting Bungs SUB-BUNG-OWF-T™ Topside Grouting Bungs are utilised during the offshore wind transition piece (TP) to monopile (MP) grouting operations. The annular gap between the two structures is bottom filled injected with a grouting mixture. PO-1712-SES-002-001
To ensure the grouting mixture level fills to the top of the annular gap, air must be vented to prevent a pneumatic lock. SUB-BUNG OWF-T™ Topside Grouting Bungs comprise of a snorkel guided vertically into the top annular air-pocket. Once the grouting bungs have been activated and sealing the 03-off or 04-off grouting vent holes, the grout mixture level
PO-987-SES-002-020
fills to the top of the annular air-pocket ensuring grouting joint integrity.
KEY FEATURES •
Light weight & hand held
•
Field proven design & track record
•
Rapid installation, activation & removal
PO-375-SES-005-002
PO-1712-SES-003-008
11
PO-375-SES-003-001
www.subenesol.co.uk
SUB-BSR-D™ Bend Stiffeners Dynamic SUB-BSR-D™ Dynamic Bend Stiffeners are a high cost, highly engineered product to include an additional pre-defined stiffness to a cable or umbilical at the point of connection to a fixed structure. SUB-BSR-D™ Dynamic Bend Stiffeners primary function is to reduce the bending stresses in the cable or umbilical at the highest bending moment location at the fixed structure throughout the design life of
VO-2229-SES-010-003
VO-2229-SES-010-003
the project. SUB-BSR-D-S™ Split Dynamic Bend Stiffeners are a a split / two-piece product for retro-fit / repair projects. KEY FEATURES •
Designed for design life dynamic applications (tension vs angle plots)
•
PO-1613-SES-004-067
Available in a split construction for retro-fit / repair applications
•
Incorporate integral steelwork inserts to interface with fixed structure
PO-1916-SES-007-008
PO-2026-SES-001-001
12
PO-1264-SES-016-001
www.subenesol.co.uk
SUB-BSR-D™ Bend Stiffeners Dynamic
PO-2229-SES-009-054
PO-1925-SES-004-008
PO-1613-SES-002-027
13
PO-2229-SES-014-017
www.subenesol.co.uk
SUB-BSR-S™ Bend Stiffeners Static SUB-BSR-S™ Static Bend Stiffeners are a low cost, low engineered product to include an additional pre-defined stiffness to a cable or umbilical at the point of connection to a fixed structure. SUB-BSR-S™ Static Bend Stiffeners primary function is to reduce the bending stresses in the cable or umbilical at the highest bending moment location at the fixed structure during initial installation and
PO-1080-SES-002-021
PO-2481-SES-005-020
provide protection against any accidental and unplanned bending events. SUB-BSR-S-S™ Split Dynamic Bend Stiffeners are a a split / two-piece product for retro-fit / repair projects. KEY FEATURES •
Designed for design life dynamic applications (tension vs angle plots)
•
Available in a split construction for retro-fit / repair applications
•
Incorporate integral steelwork inserts to interface with fixed structure
PO-1613-SES-002-019
PO-734-002-004
14
www.subenesol.co.uk
SUB-BSR-S™ Bend Stiffeners Static
PO-2481-SES-004-024
PO-1943-SES-001-002
PO-1613-SES-004-029
15
www.subenesol.co.uk
SUB-BUOY-SBM™ Subsea Buoyancy Modules SUB-BUOY-SBM™ Subsea Buoyancy Modules utilise advanced manufacturing techniques delivering best in class buoyancy products specifically tailored for all surface, sub-surface, subsea and deep water applications. SUB-BUOY-SBM™ Subsea Buoyancy Modules are manufactured using dedicated mould tooling, allowing for repeatable and consistent production quality. SUB-BUOY-SBM™ Subsea Buoyancy Modules are utilised within a number of offshore applications including ROV buoyancy, umbilical and riser buoyancy, mid water arches and other subsea buoyancy applications.
PO-2625-SES-002-003
PO-1888-SES-005-003
In addition, Subsea Energy Solutions perform repairs of client free issue damaged buoyancy systems.
PO-1992-SES-006-003
KEY FEATURES •
Specialise in bespoke rapid delivery
•
Surface to deep water applications
•
Bespoke and modular construction
PO-1980-SES-002-011
PO-1992-SES-006-008
16
www.subenesol.co.uk
SUB-BUOY-SBM™ Subsea Buoyancy Modules
PO-1980-SES-002-022
PO-1992-SES-004-033
PO-1265-SES-056-001
PO-2365-SES-006-003
PO-1888-SES-008-001
17
www.subenesol.co.uk
SUB-BOX™ Cobra Head Spacing Boxes SUB-BOX™ Cobra Head Spacing Boxes are utilised during the umbilical termination connections to subsea infrastructures. SUB-BOX™ Cobra Head Spacing Boxes house the umbilical break-out connections, i.e. hydraulic steel tube pipe fittings, cable electrical joints, fibre optic splices, etc.
KEY FEATURES •
High bending strength
•
Field proven design & track record
•
DNV Norway design approved PO-1265-SES-018-023 PO-1265-SES-022-001
PO-006-SES-029-001
PO-1265-SES-018-032
18
www.subenesol.co.uk
SUB-BUOY-SMB™ Subsurface Mooring Buoys SUB-BUOY-SMB™ Subsurface Mooring Buoys are utilised to anchor Wave Energy Converter (WEC) into a desired offshore location. From the WEC floating on the surface, the upper catenary chain then connects to the SUB-BUOY-SMB™ Subsurface Mooring Buoys. From the SUB-BUOY-SMB™ PO-1582-SES-009-041
Subsurface Mooring Buoys the lower catenary chain then connects to the ground chain and subsea anchor, hence providing location stability and control. SUB-BUOY-SMB™ Subsurface Mooring Buoys when loaded with catenary chains are engineered to float out below the Waterline and out of sight.
PO-1582-SES-014-001
KEY FEATURES
PO-1582-SES-010-044
•
Seal welded steel construction
•
Cylindrical complete with padeyes
•
Buoyancy uplift to suit project
PO-1582-SES-014-002
19
www.subenesol.co.uk
SUB-CENTRALISER™ J-tube Centralisers SUB-CENTRALISERS™ J-tube Centralisers are utilised to centralise cables, umbilical’s, risers, flowlines, hoses, and thermoplastic composite pipes within subsea J-tubes. SUB-CENTRALISERS™ J-tube Centralisers
PO-1501-SES-004-011
are installed onto the asset either at the spool base, on-board the installation vessel or subsea using diver or Remotely Operated Vehicle (ROV). KEY FEATURES •
Bespoke designs
•
Abrasion & impact resistant
•
Rapid installation PO-620-SES-005-021 PO-1267-SES-005-051 PO-2116-SES-004-007
PO-424-SES-004-004
20
PO-1848-SES-003-007
www.subenesol.co.uk
SUB-CENTRALISER™ J-tube Centralisers
PO-1538-SES-006-003
PO-1538-SES-004-006
PO-2110-SES-001-011
PO-1848-SES-003-003
21
www.subenesol.co.uk
SUB-CLAMP™ Subsea Clamps SUB-CLAMP™ Subsea Clamps are utilised within a vast array of topside and subsea applications. SUB-CLAMP™ Subsea Clamps are used for clamping onto cables, umbilical’s, risers, flowlines, hoses and thermoplastic composite pipes. SUB-CLAMP™ Subsea Clamps are a bespoke product designed, manufactured and tested specifically to suit the requirements of each project.
PO-1699-SES-018-058
PO-2016-SES-007-001
KEY FEATURES • Bespoke designs for bespoke applications Topside, diver or ROV installation • • DNV Norway approved PO-737-SES-011-028
PO-1699-SES-018-059
PO-1950-SES-004-022
PO-1683-SES-006-004
PO-1659-SES-016-005
22
PO-1683-SES-011-025
www.subenesol.co.uk
SUB-CLAMP™ Subsea Clamps
PO-1683-SES-011-011
23
www.subenesol.co.uk www.subenesol.co.uk
SUB-DUCT™ Cable Protection Systems SUB-DUCT™ Cable Protection Systems are utilised to cost effectively provide enhanced protection to long lengths of subsea cable against dropped object impact and abrasion due to crossings, rocks and reefs. SUB-DUCT™ Cable Protection Systems are utilised to protect fibre optic cables, power cables, umbilical’s, flexible flowlines, rigid flowlines, hoses and bundled products. SUB-DUCT™ Cable Protection Systems can also be supplied with optional ballast for increased subsea stability. KEY FEATURES •
Impact and abrasion protection with optional ballast
•
Fully split or semi-split interlocking design
•
Rapid installation
PO-880-SES-005-004
PO-1190-SES-023-022
PO-1190-SES-023-024
24
PO-1190-SES-023-025
PO-1190-SES-023-026
www.subenesol.co.uk
SUB-DUCT™ Cable Protection Systems
PO-2300-SES-010-005
PO-2646-SES-003-008
PO-2300-SES-010-003
PO-2646-SES-001-002
PO-2300-SES-010-004
25
www.subenesol.co.uk
SUB-EQD™ Emergency Quick Disconnect Systems SUB-EQD™ Emergency Quick Disconnect Skid Manifold System is utilised to mitigate risks involved with vessel black ship, drift-off, loss of Dynamic Positioning (DP) and adverse weather conditions. SUB-EQD™ Emergency Quick Disconnect Skid Manifold System can integrate gimbals, swivels, running tools and guidance posts to assist and overcome operational factors such as alignment, side loads, pull out angle, over pull and ejection. KEY FEATURES •
Compact design
•
Easily transportable
•
Skid used as EQD or other ballasting operations
PO-769-SES-008-013 PO-769-SES-008-021
PO-769-SES-008-022
PO-769-SES-008-028
PO-769-SES-008-011
26
www.subenesol.co.uk
SUB-FAIRINGS™ Lower & Upper Tether Fairings The Deep Green power plant converts
current creates a lift force on the wing which
turbine and a nacelle. By means of a rudder,
withstand the high loads created by the
renewable energy from tidal and ocean
pushes the kite forward. The kite is steered
a servo system and a control system the kite
wing and to accommodate power cables
currents into electricity by way of a novel
in an 8-shaped trajectory by a rudder
is steered in its predestined trajectory. The
out from the generator and communication
principle, somewhat similar to the posture
and reaches a speed 10 times the water
struts are connected to the tether which
cables for the control system. For optimal
of a wind kite. The kite assembly, consisting
current speed. As the kite moves, water
attaches the kite to a swivel fastened to
performance the tether has a fairing in order
of a wing and turbine, is attached by a
flows through the turbine and electricity is
a foundation on the seabed. The 110 mtr
to minimise the overall drag of the device.
tether to a fixed point on the ocean bed.
produced in the gearless generator. Deep
long tether has two functions; to work as
As water flows over the wing, the water
Green consists of a wing, which carries a
the force-bearing element designed to
PO-1134-SES-045-016
PO-1134-SES-028-002
27
www.subenesol.co.uk
SUB-CLAMP-SWIVEL™ Swivel Subsea Clamps SUB-CLAMP-SWIVEL™ Swivel Subsea Clamps are utilised within specific subsea applications where there is a requirement to control cables in a desired subsea midwater column location. SUB-CLAMP-SWIVEL™ Swivel Subsea Clamps are used for clamping onto cables, umbilical’s, risers, flowlines, hoses and thermoplastic composite pipes. SUB-CLAMP-SWIVEL™ Swivel Subsea Clamps are a bespoke product designed, manufactured and tested specifically to suit the requirements of each project. KEY FEATURES •
Bespoke designs for bespoke applications
•
Topside installation
•
DNV Norway approved
PO-1571-SES-007-022
PO-1961-SES-007-003
PO-1344-SES-012-000
28
PO-1571-SES-010-003
www.subenesol.co.uk
SUB-FEND™ Hose & Flange Protections SUB-FEND™ Hose & Flange Protections are utilised to protect large diameter import / export hose steel flange assemblies from impact, corrosion and snagging. SUB-FEND™ Hose & Flange Protections comprise of two moulded sections, secured together by the means of fasteners and high tension strapping. SUB-FEND™ Hose & Flange Protections provide a hose steel flange with a highly durable, impact resistant product. KEY FEATURES • Split design • Neutrally buoyant in water, eliminating self-weight loading • Rapid installation and removal PO-121-SES-005-096
PO-121-SES-005-092
PO-121-SES-005-099
PO-121-SES-005-077
PO-531-SES-003-002
29
PO-531-0SES-03-003
www.subenesol.co.uk
SUB-FLEX™ Cable Protection Systems SUB-FLEX™ Cable Protection Systems are a patented combination of a bend stiffener and bend restrictor. SUB-FLEX™ Cable Protection Systems low load mode operates as a traditional bend stiffener. SUB-FLEX™ Cable Protection Systems high load mode operates as a traditional bend restrictor. SUB-FLEX™ Cable Protection Systems are fully split for retro-fit / repair applications. SUB-FLEX™ Cable Protection Systems are suitable for vertical applications (FPSO) or horizonal applications (OWF) and have been successfully operating in Oil & Gas, Offshore Wind and Marine Energy since 2016.
PO-1264-SES-021-001 PO-1408-SES-016-002
KEY FEATURES • Stiffness fully variable & tuneable • Fully split design Rapid installation and removal •
PO-1145-SES-007-020
PO-2543-SES-017-076
30
www.subenesol.co.uk
SUB-FLEX™ Cable Protection Systems PO-2010-SES-004-003
PO-1654-SES-015-002 PO-1193-SES-018-011
PO-1408-SES-016-001
PO-2543-SES-017-040
31
www.subenesol.co.uk
SUB-FLEX™ Cable Protection Systems
PO-2543-SES-017-108
3232
www.subenesol.co.uk www.subenesol.co.uk
SUB-VSS™ Vortex Shedding Sleeves SUB-VSS™ Vortex Shedding Sleeves are utilised to manipulate current flow around a pipeline which, unless managed, can result in vibration due to vortex shedding. The frequency of this vibration can become close to the natural frequency of the pipe, which could consequently fatigue or damage the pipeline. SUB-VSS™ Vortex Shedding Sleeves are offered in several solutions to suppress Vortex Induced Vibration (VIV), including polyurethane VIV strakes, roto-moulded strakes and thermoformed strakes. KEY FEATURES • Bespoke design to suit project Rapid installation • • Compatible with drilling operations
PO-1479-SES-007-010
PO-1479-SES-007-013
PO-1975-SES-002-001
33
PO-1975-SES-002-002
www.subenesol.co.uk
SUB-HANG™ Topside Hang-Off Clamps SUB-HANG™ Topside Hang-Off Clamps are utilised to provide a structural support between a cable, umbilical, riser, hoses or thermoplastic composite pipes and the topside J-tube flange.
PO-1837-SES-003-026
PO-2585-SES-021-043
SUB-HANG™ Topside Hang-Off Clamps, if requested, can be supplied with a sealing arrangement that provides sealing capability of the annulus between the topside pull-in asset and the topside J-tube. The SUB-HANG™ Topside Hang-Off Clamps are fitted with a continuous housing that is pre-installed prior to riser pull-in. Once the pull-in is complete Subsea Energy Solutions offshore engineers perform the final assembly. The SUB-HANG™ Topside Hang-Off Clamps are subjected to factory acceptance testing normally witness by a client and / or a third party test verification body, that verify both the load bearing capability and sealing capability within in a test rig arrangement that simulates all offshore parameters and conditions.
PO-1941-SES-007-005
PO-1715-SES-016-031
KEY FEATURES • Modular construction • •
Rapid installation DNV Norway approved
PO-2003-SES-012-012
34
www.subenesol.co.uk
SUB-HANG™ Topside Hang-Off Clamps
PO-2585-SES-021-084
PO-2585-SES-021-024
PO-2543-SES-020-008
PO-1309-SES-009-009
35
www.subenesol.co.uk
SUB-HEAD-F™ Pull-In Heads Flexible SUB-HEAD-F™ Flexible Pull-In Heads are utilised to provide a lifting point for an umbilical pull-in operation through a small radius J-tube. KEY FEATURES • Flexible design • Fully sealed • DNV Norway approved
PO-1265-SES-054-001
PO-1265-SES-054-002
PO-1265-SES-026-008
PO-1265-SES-026-027
36
PO-1265-SES-026-014
www.subenesol.co.uk
SUB-HEAD-R™ Pull-In Heads Rigid SUB-HEAD-R™ Pull-In Head Rigid are utilsed to provide a lifting point for an umbilical pull-in operation through a large radius J-tube. KEY FEATURES • Rigid design • Fully sealed • DNV Norway approved
PO-1610-SES-014-011
PO-1610-SES-012-068
PO-706-SES-001-001
PO-706-SES-001-011
37
PO-1264-SES-012-012
www.subenesol.co.uk
SUB-GASKET™ Nacelle Gaskets SUB-GASKET™ Nacelle Gaskets are utilised to prevent cold welding between offshore wind farm turbines / nacelles and vessel stillages during mobilisation and transportation to the offshore wind farm construction site. KEY FEATURES • 4-piece design / 4-off quadrants • Compression & abrasion resistant • Rapid preparation & installation
PO-218-SES-004-036 PO-414-SES-004-006
PO-218-SES-004-019
38
PO-218-SES-004-028
www.subenesol.co.uk
SUB-LINK™ Buoyant Vertebrae Bend Restrictors SUB-LINK™ Buoyant Vertebrae Bend Restrictors are utilised to reduce submerged weight of standard vertebrae bend restrictors. SUB-LINK™ Buoyant Vertebrae Bend Restrictors are often utilised behind subsea trenchers to raise / lift cables from off the seabed whilst the trencher crawls forwards. KEY FEATURES • Split design • Bespoke and modular construction Rapid installation •
PO-1888-SES-006-003
PO-1298-SES-014-019 PO-551-SES-001-001
PO-551-SES-003-003
PO-1298-SES-014-022
39
www.subenesol.co.uk
SUB-PIGGY™ Piggy Back Clamps SUB-PIGGY™ Piggyback Clamps are utilised when a pipeline laying operation may have a requirement to simultaneously lay a secondary small diameter service pipe, cable or umbilical. SUB-PIGGY™ Piggyback Clamps ensure that the secondary lines are adequately supported between topside deployment and subsea installation. KEY FEATURES • Split design • Bespoke and modular construction • Rapid installation
PO-1550-SES-004-004
PO-1550-SES-007-001
PO-1550-SES-006-001
PO-1459-SES-001-014
PO-1550-SES-007-005
40
www.subenesol.co.uk
SUB-PIGGY™ Piggy Back Clamps
PO-1661-SES-004-036
41
www.subenesol.co.uk www.subenesol.co.uk
SUB-ROLLERS™ Cable Management Systems SUB-ROLLERS™ Cable Management Systems are utilised to assist with onshore and offshore cable management operations. KEY FEATURES
• • •
Radius to suit cable minimum bend radius Roller groove to suit cable outside diameter Load bearing to suit cable installation loads
PO-886-SES-001-002
PO-720-SES-001-007
42
www.subenesol.co.uk
SUB-PENETRATOR™ Cable Penetrators SUB-PENETRATOR™ Cable Penetrators are utilised to hydrostatically seal the outer diameter and inner diameter of a power cable.
KEY FEATURES • All components continuous • Hydrostatic sealing • Rapid installation, activation & removal
SUB-PENETRATOR™ Cable Penetrators sealing technology can accommodate for cable tollerances, ovalities and surface defects.
PO-2332-SES-012-001
PO-2332-SES-005-007
43
www.subenesol.co.uk
SUB-SRRJ™ Subsea Repair Joints SUB-SRJ™ Subsea Repair Joints SUB-SRJ™ Subsea Repair Joints are utilised to provide low (LV) and medium voltage (MV) cable connections. KEY FEATURES • Proven track record • Rapid delivery • Available up to 220 kV
PO-1920-SES-006-005
PO-1568-SES-002-012
PO-1330-SES-008-011
PO-1265-SES-018-052
PO-2032-SES-009-016
44
www.subenesol.co.uk
SUB-SRRJ™ Subsea Repair Joints
PO-109-SES-008-046
PO-1920-SES-006-076
PO-734-SES-002-006
PO-2032-SES-009-017
45
PO-109-SES-008-061
www.subenesol.co.uk
SUB-SEAL™ J-tube Seals SUB-SEAL™ J-tube Seals are utilised to seal the interface between the cable, umbilical, riser, hoses or thermoplastic composite pipes and the inside of a subsea J-tube. SUB-SEAL™ J-tube Seals incorporate a water tight seal in which an anti-corrosion inhibitor is often introduced. SUB-SEAL™ J-tube Seals can be provided in both diverless and diver installed solutions. SUB-SEAL™ J-tube Seals typically will be combined with a centraliser arrangement, designed to accurately position the assembly within the J-tube during the pull-in campaign. KEY FEATURES • Vessel Installed ROV Activated J-tube Seal Vessel Installed • Diverless Passive J-tube Seal Vessel Installed • Diver Activated J-tube Seal Diver Installed • Diver Activated J-tube Seal • Vessel Installed ROV Activated J-tube Seal
PO-1787-SES-004-030
PO-2003-SES-012-025
PO-1538-SES-004-028
PO-2176-SES-007-008
46
PO-2543-SES-014-026
www.subenesol.co.uk
SUB-SEAL™ J-tube Seals
PO-2543-SES-017-075
PO-1898-SES-002-008
PO-1898-SES-004-001
47
PO-1898-SES-004-002
www.subenesol.co.uk
SUB-PIP™ Pipe-In-Pipe-Water Stop Seals SUB-PIP™ Pipe-In-Pipe Water Stop Seals are utilised as a means of containing and localising flooding to one pipe length, rather than the entire pipe line during either pipe-in-pipe initial installation or pipe-inpipe exterior damage. SUB-PIP™ Pipe-In-Pipe Water Stop Seals consists of two sealing elements and a mechanical clamp assembly used to anchor the seal onto the inner pipe. SUB-PIP™ Pipe-In-Pipe Water Stop Seals are suitable for both j-lay, s-lay and reel lay deployments. KEY FEATURES • Passive sealing • Automatic activation • Installation during pipe pull-in operation
PO-1586-SES-001-001
IMO-1586-SES-001-003
IMO-1586-SES-001-004
IMO-1586-SES-001-009
48
IMO-1586-SES-001-005
www.subenesol.co.uk
SUB-STAB™ Subsea Hotstabs SUB-STAB™ Subsea Hotstabs are utilised to assist with subsea hot stab operations.
PO-769-SES-004-007
SUB-STAB™ Subsea Hotstabs are available in single or dual port and are as low pressure (LP) or high pressure (HP) options. SUB-STAB™ Subsea Hotstabs offer a range of diver and ROV hotstab handles. PO-1015-SES-001-001
KEY FEATURES •
Single or dual port
•
Low pressure or high pressure
•
Diver or ROV handles
PO-1015-SES-002-001
PO-1015-SES-001-004
49
www.subenesol.co.uk
SUB-VBR™ Vertebrae Bend Restrictors SUB-VBR™ Vertebrae Bend Restrictors are utilised to protect the over bending of cable, umbilical, riser, hoses or thermoplastic composite pipes. SUB-VBR™ Vertebrae Bend Restrictors comprise of a number of interlocking elements which, when subjected to an external load, articulate and lock together to form a smooth curved locking radius. SUB-VBR™ Vertebrae Bend Restrictors boast an extensive track record having successfully completed over 150 projects, for over 50 separate global clients. KEY FEATURES • Split design • •
Ease of installation onshore & offshore DNV Norway approved
PO-1757-SES-007-001
PO-1538-SES-006-002
PO-006-SES-029-001
50
PO-2543-SES-017-076
www.subenesol.co.uk
SUB-VBR™ Vertebrae Bend Restrictors
PO-2041-SES-005-003
51
www.subenesol.co.uk www.subenesol.co.uk
High Pressure Inline (hpi) Swivels for subsea & topside flexible lines Designed for offshore service, HPI swivels allow for 360 degree rotation of subsea and topside flexible hoses. A compact design offers reduced weight with heavyduty internal bearings to support hose loads and provides low rotating torque across the entire pressure range. HPI swivels are utilised worldwide to provide efficient, consistent and safe connections to high pressure equipment. KEY FEATURES • 1”- 6” Standard flow path sizes • Designed for sour service in accordance with NACE MR0175 • Designed & qualified to API 16C • Modular design reduces weight & simplifies swivel service • Wetted components feature F55 construction for superior corrosion resistance • Heavy duty plain bearings allow for low torque rotation • Exclusive high pressure dual sealing technology • Pressure & load tested to verify optimum performance • Capable of handling a wide range of bore fluids • 3rd party design approvals available as required
52
www.subenesol.co.uk
Rotary Unions For Hose Reels Our specialised offshore rotary unions integrate directly into umbilical hose reel systems allowing reliable winding / releasing of hose and equipment into the sea. High pressure fluid swivels provide hydraulic, pneumatic, chemical and other service for hose, cable and umbilical reel applications and bulk loading stations. Applications suitable for offshore rotary unions include subsea and topside intervention and workover umbilical reelers / winches, installation and decommissioning operation umbilicals, shallow and deep water vertical / horizontal completion umbilicals, ROV flying leads and jumper umbilicals and other subsea tieback and control umbilical hose reel applications. KEY FEATURES • Working pressures to 20,000 PSI with 1.5 x safety factor • Engineered to strict customer specifications • Dual seal passage design with atmosphere venting to protect against crosstalk • Durable maintenance-free design & stainless steel construction • High flow volume options • Designs available in accordance to ATEX and explosive environments
53
www.subenesol.co.uk
Rental Equipment As part of our turn-key services offered, we keep a stock of equipment and machinery available for rental on a per project basis. Please don’t hesitate to get in touch with us to discuss your requirements and equipment offered. Below is a small portfolio of the types of equipment we currently have available to rent. KEY FEATURES • 3.2 m SUB-QUAD™ Lifting Quadrant • 2.0” SUB-EQD™ Emergency Quick Disconnect Skid Manifold System PO-1380-SES-003-003
PO-769-SES-008-013
54
www.subenesol.co.uk
Bespoke Machining & Fabrication As part of our end to end product delivery model we offer full machining and fabrication services utilising some of the best technicians in the industry, skilled in precision CNC machining, milling and turning, moulding and all other manual conventional methods of construction. We are equipped to work with a variety of materials including steel, aluminium, brass, copper, plastics and exotic materials including titanium and magnesium alloys. We cover all welding disciplines required within the industry, including TIG, MIG, MMA alongside our course coded welders and aluminium and super duplex welding, ensuring any fabrications are of the highest quality. We offer full precision machining services alongside our heavy fabrication and construction capabilities, skilled in CNC and manual turning, CNC and manual milling, vertical and horizontal boring, drilling, tapping and slotting of materials and components.
PO-1654-SES-011-001
PO-2543-SES-014-037
PO-1632-SES-006-005
PO-1694-SES-016-004
PO-1683-SES-007-010
PO-1883-SES-003-005
PO-1694-SES-008-007
55
www.subenesol.co.uk
General Services Subsea Energy Solutions in-house services
Precision Machining
Polyurethane Spraying
include, standard and bespoke design
Utilising some of the best technicians
Offering both services and products
solutions, machining and fabrication,
in the industry, skilled in all aspects of
with regards to Polyurethane Spray
polyurethane, load and pressure testing
Precision Machining.
Coatings and Polyurethane Spray
services, onsite, onshore and offshore
Moulding
commissioning combined with ongoing
Heavy Fabrication
service programmes & maintenance.
Our skilled workforce offer a range
Surface Protection
Our mission is to consistently deliver on
of fabrication, welding, assembly and
Providing an extensive range of
schedule and on budget and to meet
fitting services.
corrosion, heat and fire resistant
and exceed clients ever increasing
coating products, proven to be
expectations by pledging to strive
Testing & Calculations
to provide an unrivalled service and
Our testing capabilities allow us to
purchasing experience.
analyse new or existing designs in
unparalleled in the industry.
order to optimise their performance Machining & Fabrication
and ensure the required functionality
Our facilities allow us to produce
is achieved.
rapid prototypes and full series production. Comprehensive tooling
Project Management
and material stock allows fast
Offering full project management
turnaround with low set up and
services to assist in each stage of the
tooling costs.
product delivery process.
Polyurethane Processing
Site Support
With skills in all aspects of
As an addition to all of our services
polyurethane processing, our highly
we offer full on-site support for any
adaptable and in-house facilities will
systems / developments undertaken.
ensure leading product development and manufacturing.
56
www.subenesol.co.uk
PO-2585-SES-011-023
PO-1742-SES-008-004
5757
www.subenesol.co.uk www.subenesol.co.uk
PO-2585-SES-010-038
58
www.subenesol.co.uk www.subenesol.co.uk
PO-1558-SES-012-009
Subsea Energy Solutions Ltd Unit 04 Colburn Business Park Chartermark Way Catterick Garrison North Yorkshire England DL9 4QJ Tel : +44 (0) 1748 828 580 Fax : +44 (0) 1748 828 581 Mob : +44 (0) 7738 726 994 E-mail : sales@subenesol.co.uk Skype : subsea.energy.solutions
Service And Quality Is Never An Accident, It Is Always The Result Of Intelligent Effort
www.subenesol.co.uk Company : 7804453 • VAT : 131199526 • FPAL Registration : 07804453 • FPAL Supplier : 10055447 • DUNS : 217495762
