HPAC December 2021

AHR INNOVATION AWARDS

TEST & MEASURE PRODUCTS

IN-SLAB TUBING DEPTH

DECEMBER 2021

LESSONS LEARNED INDUSTRY EXPERTS SHARE CAREER EXPERIENCES

BUFFER TANKS & LOW TEMP HEAT AIR SOURCE HEAT PUMP CONVERSION Follow Us On

Follow Us On

@hpacmag @hpacmag

Battery Back-Up Pumps

UP TO

16 Days* Professional-grade protection.

The new StormCell® series of battery backup pumps from Liberty feature advanced professional-grade chargers, energy efficient pumps for longer run times, and optional NightEye® wireless technology for remote monitoring through your smart device.

• Available in both standard and wireless connected models • Professional-grade chargers (10 amp and high-output 25 amp) • Single and dual battery systems • Energy efficient DC pump (manufactured in the U.S. by Liberty) * Model 442-25A, StormCell® Group 31 wet cell batteries. Pump cycling 10 gallons at 10' lift - 4 times per hour.

NEW! StormCell® High Performance Batteries Now Available from Liberty Pumps

L i b e r t y Pu m p s . c o m / Sto r m C e l l 800.543.2550

Copyright © Liberty Pumps, Inc. 2021 All rights reserved.

Apple® iOS & Android® compatible FREE App!

CONTENTS

DECEMBER 2021 / VOL. 95 NO. 7

A look inside a recent air-source heat pump installation

24

26 HPACMAG.COM

12

FEATURES 12 COVER STORY

22

HVAC IN WHICH I GO ccASHP! Our intrepid HVAC writer chronicles his own journey towards cold climate air source heat pump acceptance and installation.

By Ian McTeer

HYDRONICS OPTIMAL TUBING DEPTH IN A SLAB In this episode of 30 Mechanical Minutes John Siegenthaler talks about achieving the ideal tubing depth for in-slab heating.

By Logan Caswell

18

24

HYDRONICS THERMAL ACCUMULATORS How to set up buffer tanks in systems supplied by heat pumps.

By John Siegenthaler

HYDRONICS WORDS OF WISDOM Sharing reflections on the valuable role mentors have played in one man’s career.

By Robert Bean

CONTINUED ON P4

DECEMBER 2021 | HPAC

3

CONTENTS 26

34

HYDRONICS NEW ADVENTURES Recalling early advice and the helping hands that guided a newcomer to Canada along his path in the Canadian hydronics industry.

By Mike Miller

PLUMBING GRAVITY IS FREE The greatest lessons learned on the job come from making mistakes in the first place.

By Steve Goldie

32

REFRIGERATION THE BEAUTY OF LESSONS LEARNED Taking a few trips down memory lane to share some learned experiences.

By Dave Demma

HYDRONICS ONE CONTROL TO RULE THEM ALL How I got here and what I’ve learned about this industry.

By Curtis Bennett

37 SHOW PREVIEW THE AHR EXPO RETURNS TO LAS VEGAS The international HVAC/R community will gather again for North America’s largest trade show and conference and AHR Innovation Awards announced.

By Logan Caswell

DECEMBER 2021 / VOL. 95 NO. 7

34

38

40 SHOW REVIEW CIPHEX WEST 2021 The Canadian plumbing and heating industry gathered together in Vancouver for the industry’s first trade show event since the pandemic.

By Doug Picklyk

48 DEPARTMENTS 6 UPFRONT 8 INDUSTRY NEWS 34 MECHANICAL SUPPLY NEWS 36 PEOPLE 48 TEST & MEASUREMENT TOOLS 53 TRAINING 53 THE SOURCE 54 CALENDAR

37 4

HPAC | DECEMBER 2021

HPACMAG.COM

HELLY HANSEN IS WORN AND TRUSTED BY PROFESSIONALS ON OCEANS, MOUNTAINS AND WORKSITES AROUND THE WORLD.

HHWORKWEAR.COM

< UPFRONT CONTINUOUS LEARNING AS I WRITE THIS COLUMN, BRITISH COLUMBIA IS STILL RECOVERING FROM MASSIVE RAIN STORMS THAT HAVE LED TO flooding, mudslides, washed out roads and rail tracks. The rainfall disrupted people’s lives, delivered further setbacks to existing supply chain issues, and came only five months after the same region experienced extreme heat and drought. Unfortunately, these once in a lifetime weather events have that uncomfortable feeling of becoming annual occurrences in areas all across the country.

It’s these climate realities that are sparking change in government policy, and that was on display at the recent CIPHEX West trade show that took place in Vancouver, November 3 and 4. As the first major industry gathering of its kind since the pandemic, the crowds were eager to explore and re-connect with the community, but contractors in Vancouver were also interested in learning more about the new city building by-law that goes into effect January 1, 2022. Any new buildings, three stories or less, can no longer be heated with fossil fuels. And pending a ruling from city council, as of July 1, 2022, contractors will require a certification for heat pump installations.

The talk about the electrification of the heating and cooling industry is beginning to become reality, and this only reinforces the constant need for contractors to be learning and upskilling to stay ahead of the curve.

When it comes to the modern HVAC/R and plumbing industry, continuous learning is valuable and especially with today’s new digital technologies.

Classroom lessons from manufacturers and institutes, either online or in person, are more important than ever.

For newcomers to the industry, after time in the classroom, apprenticeship programs with hours of on-site hands-on learning and doing is where the rubber really meets the road. And for anyone who thinks their learning is done once their ticket is punched. Think again.

Being part of the skilled trades industry means being on a continuous learning curve, and for those trades people and technicians who decide that business ownership is where they want to be, or maybe moving to the manufacturer or distribution side of the business is where their career path is headed, just understand that the journey will always include learning from your own mistakes and hopefully from mentors who have already paved the way for you.

In this issue of HPAC I’ve asked some of our regular contributors to share the most valuable lessons they’ve learned along their journeys so far. For most of them the it has been the people they’ve met along the way and the life-long friendships they have forged that stand out as enduring memories.

So policy changes may force new ways of working, but it’s the strength of the community that pulls together and helps each other along that keeps the HVAC/R and plumbing industries so rewarding.

As 2021 comes to an end, the team at HPAC magazine wishes everyone a peaceful holiday season and a prosperous New Year. And keep on the lookout for our 30 Mechanical Minutes webcasts in 2022, our presence at trade shows (CMPX and MEET), and another Modern Hydronics Summit in September, all opportunities to learn and keep ahead of the curve.

Reader Service Print and digital subscription inquires or changes, please contact Urszula Grzyb, Audience Development Manager Tel: (416) 510-5180 Fax: (416) 510-6875 Email: ugrzyb@annexbusinessmedia.com Mail: 111 Gordon Baker Rd., Suite 400, Toronto, ON M2H 3R1

EDITOR Doug Picklyk (416) 510-5218 DPicklyk@hpacmag.com ASSOCIATE EDITOR Logan Caswell (416) 728-6209 LCaswell@hpacmag.com ASSOCIATE David Skene (416) 510-6884 PUBLISHER DSkene@hpacmag.com MEDIA DESIGNER Emily Sun esun@annexbusinessmedia.com ACCOUNT Kim Rossiter (416) 510-6794 COORDINATOR krossiter@hpacmag.com

PUBLISHER Peter Leonard (416) 510-6847 PLeonard@hpacmag.com COO Scott Jamieson sjamieson@annexbusinessmedia.com

PUBLICATIONS MAIL AGREEMENT NO. 40065710 Heating Plumbing Air Conditioning (established 1925) is published 7 times per year

by Annex Publishing & Printing Inc. HPAC Magazine is the leading Canadian business publication for the owner/manager of mechanical contracting businesses and their supply partners.

ISSN: 0017-9418 (Print) ISSN 2371-8536 (Online) Contents Copyright © 2021 by Annex Publishing & Printing Inc. may not be reprinted without permission.

SUBSCRIBER SERVICES: To subscribe, renew your subscription or to change your address or information please visit us at www.hpacmag.com.

Subscription Price per year: $44.00 (plus tax) CDN; Outside Canada per year: $112.00 US; Elsewhere: 1 year $123.00 (CDN); Single copy Canada: $5.00 CDN. Heating Plumbing Air Conditioning is published 7 times per year except for occasional combined, expanded or premium issues, which count as two subscription issues.

MAIL PREFERENCES: From time to time we make our subscription list available to select companies and organizations whose product or service may interest you. If you do not wish your contact information to be made available, please contact us via one of the following methods: Tel: 416-442-5600 ext. 3552, Fax: 416-510-6875 or 416442-2191; E-mail: blao@annexbusinessmedia.com; or by mail: 111 Gordon Baker Rd., Suite 400, Toronto ON M2H 3R1 Annex Privacy Officer Privacy@annexbusinessmedia.com Tel: 800-668-2374 HPAC Magazine receives unsolicited materials (including letters to the editor, press releases, promotional items and images) from time to time. HPAC Magazine, its affiliates and assignees may use, reproduce, publish, re-publish, distribute, store and archive such unsolicited submissions in whole or in part in any form or medium whatsoever, without compensation of any sort.

NOTICE: HPAC Magazine, Annex Publishing & Printing Inc., their staff, officers, directors and shareholders (hence known as the “Publisher”) assume no liability, obligations, or responsibility for claims arising from advertised products. The Publisher also reserves the right to limit liability for editorial errors, omissions and oversights to a printed correction in a subsequent issue. HPAC Magazine’s editorial is written for management level mechanical industry personnel who have documented training in the mechanical fields in which they work. Manufacturers’ printed instructions, datasheets and notices always take precedence to published editorial statements.

Proud member of:

www.hpacmag.com

– Doug Picklyk, Editor 6

HPAC | DECEMBER 2021

HPACMAG.COM

Canada’s Show for the HVACR and Plumbing Industries

Showcasing the future of the hydronics, plumbing & HVACR industry • Discover what’s new • Learn from the experts • Connect with the industry REGISTER TODAY FOR FREE Use promo code HPAC JOINTLY PRODUCED BY

cmpxshow.com

INDUSTRY NEWS SEE THE LATEST NEWS @ HPACMAG.COM

RIGHT TIME GROUP OF COMPANIES ACQUIRES SASKATOON’S FURNACEGUYS The Right Time Group of Companies continues to grow with the recent acquisition of furnaceguys Home Heating & Cooling. Founded in 2008, furnaceguys provides residential heating, cooling, air quality, and hot water services to homeowners in the city of Saskatoon and the surrounding area.

Furnaceguys marks the tenth acquisition completed by Right Time and the first Saskatchewan-based addition for the growing group.

Right Time has been developing a national brand through acquisitions of existing residential HVAC replacement contractors. Founded in 2014 and headquartered in St. Catharines, Ont., Right Time was previously owned by Canadian private equity firm Clairvest Group, and was subsequently acquired San Francisco-based Gryphon Investors in December 2020. right-time.ca ONTARIO INCREASES INVESTMENT TO ATTRACT YOUNG PEOPLE TO SKILLED TRADES On November 24th Ontario announced an additional $90 million investment over three-years to promote the skilled trades to young people. The spending responds to the Apprenticeship Youth Advisors report, which includes several recommendations to help solve the shortage of skilled workers in the province.

As part of the announcement, the government is also investing an additional $2.9 million, for a total of $20 million annually, to expand the Ontario Youth Apprenticeship Program (OYAP).

The OYAP now has 63 recruiters across more than 800 schools so students can learn about the trades at a younger age.

By 2025, Ontario hopes as many as one in five jobs in Ontario will be in the 8

HPAC | DECEMBER 2021

REPORT HIGHLIGHTS REASONS FOR BUILDING GREEN The 2021 World Green Building Trends report, published by the Dodge Construction network, reveals that green building continues to remain a global priority, including strong interest in Canada, despite rising concerns like the COVID-19 pandemic,.

Industry professionals surveyed source both social and financial reasons for increasing their green building efforts with top reasons including lowering operating costs, lowering carbon emissions, reducing energy and water consumption, market demand, building healthier buildings, living up to internal corporate commitments and that it’s the “right thing to do.”

Respondents stated they have shifted their focus on strategies to specifically address reducing energy consumption and the carbon footprint of building projects with creating net-zero/net-positive buildings as the top priority. Doing so reflects the recognition that only by making the built environment carbon-neutral can the goal to minimize the impacts of climate change be achieved.

Additionally, the report shows how the pandemic has had an impact on the green building sector with survey respondents noting that messaging about increasing filtered air exchange in buildings directly influenced their choice of HVAC system.

In the report respondents in Canada selected the following as the top types of green building projects they will design and construct over the next three-years: • Existing Buildings/Retrofits 54% • New Institutional Construction 40% • New Commercial Construction 33% Other findings of the report include: Most respondents (82%) are at least aware of the concept of embodied carbon – emissions from manufacture, transportation, installation, maintenance and disposal of building materials – with contractors and owners as less familiar with embodied carbon than architects and engineers.

The vast majority (79%) of those building green use at least one metric to track green building performance, an increase of five points since 2018.

About half of respondents engage in green renovation/retrofit projects, with most investors engaged in this work. construction.com skilled trades, with the average age of people entering the trades being 29.

At the same time, a third of tradespeople are nearing retirement, meaning the province is projected to face a shortfall of 100,000 construction workers over the decade.

To encourage employers to take on more apprentices, the province’s investments in pre-apprenticeship training will increase to over $77 million annually,

starting in 2022-2023. The achievement incentive will also focus on hiring apprentices from underrepresented groups, including women, BIPOC, newcomers and people with disabilities. These initiatives bring the government’s total investment in the province’s Skilled Trades Strategy to approximately $1.5 billion between 2020 and 2024. ontario.ca Continued on p10 HPACMAG.COM

INTRODUCING ADRIAN STEEL’S ALL-NEW HD UTILITY RACK LEARN MORE AT ADRIANSTEEL.COM

FLEXIBLE CONFIGURATION

TALLER UPRIGHTS

OPTIONAL PLASTISOL UPRIGHTS

ADD-ON RATCHET STRAPS

TO PROTECT YOUR LADDERS

TO QUICKLY AND SAFELY SECURE YOUR CARGO

REAR ROLLER ASSIST

ALUMINUM DESIGN

FOR A WIDE RANGE OF CARGO

FOR EASIER LOADING AND UNLOADING

FOR INCREASED STACKABILITY

RESISTANT TO CORROSION

< INDUSTRY NEWS Continued from p8

MAJOR WASTEWATER ENERGY PROJECT TO HEAT TORONTO HOSPITAL The Canada Infrastructure Bank (CIB) has invested in what it’s calling the world’s largest raw wastewater energy transfer project, located at Toronto Western Hospital.

Renewable energy company Noventa worked with the hospital and Enbridge Gas to develop the $42.9 million project which will provide approximately 90% of the hospital’s heating and cooling requirements.

The retrofit project will use the Huber ThermWin System and Noventa design to transfer thermal energy to and from wastewater flowing in the mid-Toronto interceptor sewer to provide low-carbon heating and cooling to the hospital.

As a result, the hospital’s natural gas use and water consumption will be significantly reduced. Over the next 30 years, the hospital will see a cumulative reduction in greenhouse gas emissions of more than 250,000 tonnes. noventaenergy.com cib-bic.ca TORONTO CONSIDERING NET ZERO BY 2040 Toronto Mayor John Tory has announced a new Net Zero strategy to reduce greenhouse gas (GHG) emissions in Toronto to net zero by 2040 – 10 years earlier than initially proposed.

The strategy would also look to achieve a 45% reduction in GHG levels by 2025, on the way to a 65% reduction by 2030.

If adopted, Toronto will be one of only three big cities in North America with a net zero by 2040 target. The report is being studied and could be approved by December 15.

The existing TransformTO Net Zero Strategy provides a roadmap to achieve reductions in GHG emissions from 1990 levels. Approval of the new Net Zero strategy would trigger accelerated actions to drive down emissions.

Two of the key areas being looked include: • Accelerate a rapid and significant reduction in natural gas use.

• Establish performance targets for existing buildings across Toronto.

Toronto is currently on track to achieve its 2020 GHG emissions reduction target of 30% from 1990 levels. Communitywide emissions have decreased by 38% since 1990, despite a significant growth in population.

The primary sources of GHG emissions in Toronto are 10

HPAC | DECEMBER 2021

homes and buildings (57%), mainly from burning natural gas to heat space and water. City programs, policies and strategies already in place to reduce emissions include: • The Net Zero Existing Buildings Strategy to reduce the use of fossil fuels in all existing residential, commercial and institutional buildings within the next 30 years. The strategy will see the city implement voluntary performance measures and targets initially, intending to begin the transition to mandatory requirements in 2025.

• The Net Zero Carbon Plan to reduce emissions from more than 2,500 city-owned buildings (approximately 9.5 million sq. m.) by at least 80% by 2040.

• An updated Toronto Green Standard (TGS) (Version 4) which continues to raise the bar to all while eliminating the use of natural gas in new buildings.

• The Green Will Initiative, which sees the city partner with large building portfolio owners across Toronto to accelerate emissions reductions from buildings.

• The BetterHomesTO and the Home Energy Loan Programs, provide resources and support for homeowners, including low-interest loans for home energy retrofits. toronto.ca

GRAND OPENING ASHRAE has officially opened its new global headquarters building, a $20 million renovation project and a fully net-zeroenergy (NZE) operation.

“The completion of this project is an important milestone for ASHRAE as a professional society and for the built environment worldwide,” said 2021-22 ASHRAE resident Mick Schwedler.”

The 66,700 sq. ft. building sits on 11 acres of land near Atlanta, Georgia. Although ASHRAE has occupied the building for more than a year, the installation of a photovoltaic (PV) solar array system was completed in October 2021, marking the beginning of the building’s operation at fully net-zero-energy performance. The PV system is a combination of three sub-arrays totalling 332kW, mounted on the rooftop and in an unused section of the parking lot.

The building operates six water source-heat pumps, a robust building automation system and demand control ventilation (DCV) to be used for high occupancy spaces in the meeting and learning centre. ashrae.org HPACMAG.COM

NEW EDITION OF THE HVAC DUCT CONSTRUCTION STANDARDS The Sheet Metal and Air Conditioning Contractors’ National Association (SMACNA) has released the fourth edition of its HVAC Duct Construction Standards – Metal and Flexible, updating the standard to represent the latest in sheet metal duct fabrication and installation requirements.

The updated 416-page standard was revised to provide contractors with the information they need to apply effective and efficient solutions to their projects.

Highlights of the update include: • Added information on spray and aerosolized duct sealants • Added tables for spiral flat oval duct for positive and negative pressure applications • Added options for internal supports for spiral flat oval duct • Updated liner requirements to include non-fiberglass liner types • Added information for lined round duct and spiral fittings • Added details for hangers to better illustrate where hangers are required • Updated requirements for flex duct hanger spacing and hanger width.

The publication is available in book or PDF format via SMACNA’s online bookstore. smacna.org NEW RESIDENTIAL FUEL OIL HEATING BANNED IN QUEBEC AS OF DEC. 31 – By Luc Boily On November 17, the Quebec government announced that installing oil-fired heating appliances in new residential construction will be prohibited in the province as of December 31, 2021.

In addition, in two years following that deadline (as of December 31, 2023), installing an oil furnace or replacing one with a fossil fuel furnace in existing residential buildings will also be prohibited.

As part of its 2030 Plan for a Green Economy (PGE 2030), the government believes these news measures will contribute to achieving the target of reducing greenhouse gas (GHG) emissions from heating buildings in Quebec by 50% by 2030.

Financial assistance may be available to homeowners who are required to convert to renewable energy through the Chauffez vert Program. An amount of $134.5 million for this program is part of the 2021-2026 implementation plan of the PGE 2030. According to the government release, nearly 200,000 Quebec households still own an oil-fired heater.

“Residential oil heating systems generate the highest carbon rate in addition to other atmospheric pollutants that adversely affect air quality,” said Benoit Charette, Minister of Environment and Fight Against Climate Change, in a release. environnement.gouv.qc.ca

DATA SHOWS MOST COMMUNITIES ABOVE PROVINCIAL AVERAGES FOR RADON GAS A new report by Take Action on Radon (TAOR) reveals that the majority of communities that have taken part in their 100 Radon Test Kit Challenge program are finding dangerous levels of radon are more common than Health Canada's national estimate. The program provides 100 test kits to each municipality willing to participate, so far 43 communities have taken part in the program.

Radon, the odourless, colourless, radioactive soil gas that is formed as uranium breaks down over time, is unstable and releases alpha particles, a type of radiation that is particularly damaging to lung tissues. Radon is a problem across Canada as uranium is present in the soils and rocks of all regions. It poses a problem indoors as it enters buildings from the surrounding soil through the foundation. Over time, radon gas levels can build up and exceed recommended guidelines.

In 2012, Health Canada released a report summarizing a Cross-Canada Survey of Radon Concentration in Homes. This work determined provincial averages ranged from 4 to 25%, and the estimated national average was 7%. According to TAOR's findings, of 43 communities tested, 39 are at or above Health Canada's national estimate. takeactiononradon.ca 21_2440_HPAC_DEC_CN Mod: October 26, 2021 8:48 AM Print: 10/28/21 2:16:59 PM page 1 v7

ORDER BY 6 PM FOR SAME DAY SHIPPING

π HERE WE GO AGAIN! BE PREPARED FOR THE NEXT SNOW

COMPLETE CATALOG

1-800-295-5510

uline.ca

DECEMBER 2021 | HPAC

HPACMAG.COM HPAC_Uline_Dec21.indd 1

11

2021-11-02 11:22 AM

< HVAC

IN WHICH I GO ccASHP! Our intrepid HVAC writer chronicles his own journey towards air source heat pump acceptance and installation. BY IAN McTEER

I

12

HPAC | DECEMBER 2021

more robust compressors and increased awareness of appropriate air handling system design allowed air source heat pumps (ASHP) to improve their share of the residential market, especially in moderate climates as defined by AHRI Climate Region IV (2,000 to 2,500 heating load hours) down to Climate Region I with less than 1,000 heating load hours.

Most Canadian applications are best described by AHRI Climate Region V (greater than 3,000 heating load hours). ASHPs imported to Canada continue to be tested and rated for Climate Region IV. Thus, an ASHP with a Region IV Heating Season Performance Factor (HSPF) of 9.0 would have to be derated by 15% for

Region V, the 9.0 HSPF unit becomes a 7.8 unit in most of Canada.

Even so, later model ASHP’s continued to be plagued by defrost problems that contribute to less efficient energy utilization by returning heat meticulously squeezed from frigid outdoor air back outside to defrost an iced-up outdoor coil. Additionally, during defrost, furnace heat would be utilized to temper air being delivered by a system now in cooling mode.

Properly installed and commissioned with a focus on shielding the outdoor unit from prevailing winds, defrost periods could be shortened dramatically, often to less than five minutes. Some control boards would allow several defrost periods of up to 15 minutes to acHPACMAG.COM

ALL PHOTOS BY IAN MCTEER

have written extensively about heat pumps, both air source and ground source, over the years. The ability of heat pumps to output several times more useful heating watts compared to wattage consumed has held my attention for decades. However, some units do it better than others.

I examined air source heat pumps used in residential applications going back to the late 1970’s. These early units were never meant for cold climates, having inadequate defrost controls, ridiculously high balance points, compressor protection was limited to nonexistent, and they were too often installed in combination with secondrate air handling systems.

By the late 1980’s, demand defrost,

cumulate before signaling a fault code that might not be intercepted until the next maintenance call.

Faulty defrosting, whether installation related or by mechanical fault, cause ASHP’s to gobble energy.

Systems trying for defrost a third time after two consecutive 15 minute defrost periods should shut down, bring on backup heat, and signal the homeowner to call for service, so I say.

Figure 1 illustrates the extent of a frozen outdoor coil. Perhaps winddriven snow overwhelmed the unit’s ability to defrost itself, maybe the defrost control board failed, or a coil sensor failed. Whatever the cause, it’s going to be a frosty no heat call for this HVAC technician.

It’s worth noting that ground source heat pumps have no need to defrost themselves as the entire outdoor component is buried below the ground out of the way of raging winds, freezing rain, and knee-deep snowfalls.

Despite my reservations about plopping a refrigeration coil outside in freezing cold weather with a potentially wonky defrosting system, I’m now on board with the latest technology used with cold climate air source heat pumps (ccASHP).

In my own situation, costs related to the equipment and installation of a ground source heat pump are still beyond my budget; had I been able to rent the ground component from a third party as once proposed by a large utility, I think I’d be doing ground source today. But when it came time to move into a smaller house, we decided to avoid the condominium route and settled instead to purchase a mobile (or manufactured) house and have it installed on a concrete pad. I’m now located in a spacious senior’s mobile park in eastern Ontario not too far from the Quebec border.

So why would I choose a ccASHP when I’m aware of potentially suffering from one or more of their long-standing shortcomings? Just like anything else, HPACMAG.COM

Figure 1: Frozen air source heat pump.

major technological improvements, such as more robust inverter-driven compressors utilizing dense vapour injection, combined with microelectronic controls better managing defrost cycles, give me the confidence that a properly installed, expertly commissioned and well maintained ccASHP will give me the comfort and efficiency I’m looking for.

THE HOMEOWNER/CONTRACTOR RELATIONSHIP This time I’m the homeowner, and I’m the one in the driver’s seat, right? After all, I have the gold, therefore I make the rules. That might be the way some

homeowners perceive relationships with various contractors ought to be, after all, it wasn’t that many years ago when some homes had “tradesman’s entrances” usually around back so the folks inside wouldn’t have to see the scruffy blue-collar workers whilst sipping their tea.

Times have changed so dramatically that yesterday’s notion of simply looking around for the best deal is not the prime driver of the buying decision.

“What should I buy?” and “Who should do the work?” were the top-of-mind questions for me.

No one wants to pay any more than Continued on p14 DECEMBER 2021 | HPAC

13

< HVAC

Continued from p13

Figure 4. The return air system seems to work well enough.

Figure 2. Tricky electrical wiring accomplished.

Figure 3. The new indoor air handler fit neatly into its closet.

necessary; hence, getting a “proper deal” is more like it.

HVAC equipment sophistication combined with the knowledge and technical expertise needed to design, install, commission, and maintain one’s longterm investment in efficient HVAC products means homeowners need to do some homework.

For the first time in my life, I’ve had to shop around for several contractors needed to service my manufactured house. Searching ads on the Internet and those posted in the local newspaper, I still took the time to gather references from my community. I’m happy to say that the local contractors I hired have performed as expected. But I’m still waiting for other work to be done as everyone is incredibly busy and some materials are scarce.

My focus on contractor reliability and professionalism means that I’m not necessarily brand focused. I know every brand has suffered from “issues,” some more than others, however, it’s how the problems were dealt with that counts. I selected the Mitsubishi H2i Hyperheat ccASHP combined with a matching indoor air handler installed

counterflow with 8 kW of supplemental backup electric heat.

I had the luxury of selecting an HVAC contractor having decades of experience with both air source and ground source heat pumps including Mitsubishi products. ATEL Air headquartered in Williamsburg, Ont. serves my area of eastern Ontario. My relationship with ATEL Air began when the owner, Jimmie Thom, decided to take on the Trane gas furnace and air conditioner product line in the early 2000’s. I became a technical asset for ATEL and provided installation and service training along with telephone support for ATEL technicians over the years.

Admittedly, homeowners looking for a quality HVAC experience must rely on their research and testimonials to make the buying decision. I had a much easier time of it this go around.

14

HPAC | DECEMBER 2021

OUT WITH THE OLD The “old” in this case was a single stage downflow high efficiency gas furnace provided by the home manufacturer, and it was in rather rough shape after the bumpy trip to Ontario from Nappanee, Indiana.

“I'm happy to say that the local contractors I hired have performed as expected.”

The installation involved a considerable amount of electrical wiring, both high voltage and control voltage. ATEL Air is also an electrical contractor well versed in tricky wiring jobs. The 200amp electrical panel, mounted upside down and completely encased in the stud wall with drywall all around, required some careful treatment (see Figure 2). Minor cuts into the drywall exposed a new route for the heavier wiring running to the air handler and outdoor unit.

The new indoor air handler fit neatly into its closet application (Figure 3). I’m not thrilled by the “free delivery” return air system (Figure 4) as designed by the mobile house manufacturer, but there’s no option for return ducting in such close quarters and it seems to work well enough through the extralarge grilles fitted to the utility room doors, so I’ll put that objection aside, at least for now.

I could conceivably run a duct through the utility area and pick-up Continued on p16 HPACMAG.COM

Maestro Wi-Fi App available

Come see us at AHR 2022 (Booth # 9430/9431)

< HVAC

Continued from p14

some return air near the ceiling in the dining room area if necessary. Let’s wait and see if I do that!

My brand new Ecobee smart thermostat delivered my September Energy Report; already. The system operated in cooling mode just 15 hours; turns out my average setting of 23.5C saved me 16% in operating costs had I chosen a lower cooling set point of 22C. Now for the best part, I’m in the bottom 50% of energy users compared to other Ecobee thermostat users.

Obviously, I’m too sexy for my heat pump.

FUTURE OF RESIDENTIAL HVAC?

Technician Brad Jagert monitors the start-up process.

With the current concern about carbon pollution and climate change, governments continue to look for ways to reduce CO2 emissions, meaning natural gas, propane, fuel oil and wood-burning heating appliances have fallen into disfavour amongst the regulatory set.

Yet, switching many more households over to electric heat pump systems must also coincide with significant improvements to the North American electrical grid, including massive new sources of power generation.

Mark Jacobsen, co-founder of a

Stanford University civil engineering team known as The Solutions Project, thinks Canada can meet 58% of its power generation needs using wind turbines alone by 2030. As I write, the Independent Electricity System Operator of Ontario (IESO) is reporting the province-wide hourly load at 12,905 MW with nuclear plants providing 68% of the demand, wind at 15%.

With only nine years to go, I doubt we’ll see renewables take the lead in power generation by 2030.

I asked Greg Millard, service man-

This high-efficiency gas furnace was removed to make way for a new cold climate air source heat pump.

Surface area, one of the secrets of higher efficiency everything, translates into a giant indoor coil obscuring the view of installer/ technician Matt Dillabough as he prepares it for service in a downflow application.

16

HPAC | DECEMBER 2021

ager at ATEL Air, if his customers (existing and new) are asking for quotes on ground source or air source heat pumps. His reply: “Yes, especially in areas where oil or LP (liquid propane) are the only alternatives.”

At the same time, he is not currently discouraging fossil fuels, “but we do educate the customer about the alternatives, especially when LP and oil are the other options.”

Millard tells me his customers still want tried and true gas furnaces and air conditioners as they continue to be perceived as the most affordable option when it comes down to costs related to installation, operation and maintenance.

With current supply chain issues, the very near future could be of the greatest concern to residential HVAC contractors. There may well be plenty of work in hand, however, Jimmie Thom, president of ATEL Air told me, “We spend a lot of time verifying equipment is available and expected shipping dates for sold jobs.”

Thom is concerned that some gas furnaces are in short supply, or out of stock, going into the heating season, and major replacement parts such as heat exchangers have longer lead times, weeks instead of days as in the HPACMAG.COM

Ou

rn

ew

loo

k

®

I

O NTR

DU

CIN

G...

NEW - KANE 458S - Combustion Gas Analyzer  Measures: CO, CO2, differential temperature, differential pressure  Calculates: O2, CO/CO2 ratio, Losses, Efficiency  High Altitude Compensation  Wireless Airflow Measurement*  Over-range protection pump  Wireless temperature probes* for flow and return boiler and radiator temps.

Wiring running through conduit including a field fabricated support for the line set as it will eventually pass through skirting on the house, yet to be installed.

KANE 599 - ECM Tester     

ECM Measurement 3 Phase Rotation Testing Low Z / Low Pass Filter Auto Volts / Amps Selection Wireless to App

Sophistication—not your grandmother’s idea of a heat pump—these are views inside the outdoor unit.

past. Millard said they’ve had to do some “brand hopping when needed and using a wider range of suppliers for material—basically buy it when and where it is available.”

To date, my ccASHP has been performing brilliantly. I’m using the thermostat’s automatic mode in which the cooling setpoint at 23.5C allows for some cooling and dehumidification on sultry autumn days. Heating setpoint at 21C allows the equipment to take the chill off early in the day as winter gets set to arrive any time now. Will modern cold climate and ground source heat pumps eventually rule the day? I think so. <> Ian McTeer is an HVAC consultant with 35 years of experience in the industry. He was most recently a field rep for Trane Canada DSO. McTeer is a refrigeration mechanic and Class 1 Gas technician.

KANE-TCAM - Thermal Imaging Simple, affordable point & shoot technology with high quality thermal imaging.

Ideal for heating, ventilation, refrigeration engineers and automotive & maintenance technicians.  Large LCD colour display  4 surface measurement modes to improve speed & ease of finding problems.  Surface temperature range - 20C to 300C

WWW.KANETEST.CA *ADDITIONAL PROBES REQUIRED

1.877.475.0648

KANE and the KANE logo (registered in the UK and elsewhere) are trademarks of Kane Group Limited, used under license.

DECEMBER 2021 | HPAC

HPACMAG.COM HPAC_Kane_Oct21.indd 1

17

2021-09-22 1:35 PM

< HYDRONICS

THERMAL ACCUMULATORS How to use buffer tanks in systems supplied by heat pumps. BY JOHN SIEGENTHALER

W

henever a hydronic system is divided into several zones it’s worth considering a buffer tank between the heat source and the distribution system. This is especially true when the heat source is a single speed “on/off” device rather than a modulating device.

One example is a 4-ton geothermal heat pump supplying several individually controlled panel radiators. Each radiator represents what I would call a “micro-zone.” The output of such a zone is likely less than 10%, perhaps even less than 5% of the heating capacity of the heat source. If you connect several such zones directly to a heat source, even one that can modulate down to say 20% of rated capacity, you’re likely to experience short cycling. This same reasoning holds true for an air-to-water heat pump.

SIZING A BUFFER TANK The size of a buffer tank is based on two parameters the designer chooses: 1. What is the minimum run time of the heat source that avoids the designer’s definition of “short cycle?”

2. And what is the allowable temperature change of the buffer tank during the minimum on-cycle time?

Once these two decisions are made, the math is easy. The minimum tank size can be determined by Formula 1.

Formula 1:

V=

t(Qheat source – qload) 500(∆T)

where: V = required volume of the buffer tank (gallons) t = desired duration of the heat

source’s “on cycle” (minutes) Qheat source = heat output rate of the heat source (Btu/h) qload = rate of heat extraction from the tank (can be zero) (Btu/h) ∆T = temperature rise of the tank from when the heat source is turned on to when it is turned off (F) Here’s an example. Assume that a designer wants a hydronic heat pump with a rated output of 48,000 Btu/h to operate with a minimum on-cycle of 10 minutes while supplying heat to a towel warmer radiator releasing heat at 2,000 Btu/h. The heat pump responds to the buffer tank temperature. It turns on when the buffer tank temperature drops to 100F, and off when the tank reaches 120F. What is the necessary buffer tank volume to accomplish this?

Just put the numbers into the formula and grab a calculator:

Figure 1. Two-, three- and four-pipe buffer tank configurations.

18

HPAC | DECEMBER 2021

HPACMAG.COM

V=

10 (48,000 – 2000) t(Qheat source – qload) = = 46 gallons 500(∆T) 500 (120 – 100)

Larger buffer tanks can provide longer heat source on-cycles. They can also allow a narrower temperature change over a specific on-cycle. It’s easy to evaluate the trade-offs between on-cycle length and tank temperature swing using Formula 1. Large buffer tanks obviously cost more, take up more room, and usually have higher standby heat loss.

MAKING CONNECTIONS There are several ways to pipe buffer tanks. They are called “four-pipe”, “three-pipe” and “two-pipe” configurations. Figure 1 (below left) shows all three.

The four-pipe layout is the “classic” piping configuration for buffer tanks in hydronic systems. The heat source adds heat on one side, while the load removes heat from the other side.

This piping configuration allows excellent hydraulic separation between the heat source circulator and the load circulator(s).

Until a few years ago I assumed that this was the only piping configuration for a buffer tank in a hydronic system. However, more research into how thermal storage tanks are piped in European systems using pellet boilers was an eye-opening experience for me. Read on and you’ll see what I learned.

One constraint of a four-pipe configuration is all heat from the heat source must pass through the tank on its way to the load. This isn’t a problem when the buffer tank temperature is being maintained. However, this arrangement definitely retards heat transfer from the heat source to the load if the tank is allowed to cool down substantially.

If you install a four-pipe buffer tank be sure to install a check valve on the heat source side of the system to prevent reverse thermosiphoning from the heated tank back through the heat pump circuit when the heat pump is off. If allowed to occur, reverse thermosiphoning can drain a substantial amount of heat from the tank over a period of several hours when the heat pump is off.

The two-pipe configuration, which I came across in some European piping schematics, places the load between the buffer tank and the heat source. This allows the possibility of passing heat directly from the heat source to the load when both are operating at the same time. That’s very desirable when recovering the building from a setback condition.

If the load flow rate is lower than the flow rate through the heat source, the difference between these flow rates moves through the buffer tank.

One limitation of the two-pipe configuration is that a differential pressure valve, motorized ball valve, or other device that creates a forward opening resistance of 1 to 1.5 psi needs to be installed in the heat source piping to prevent flow that’s returning from the load from passing through the heat source when it’s off.

HPACMAG.COM

It’s also necessary to keep the tees that connect to the supply and return piping to the load as close as possible to the tank to allow for good hydraulic separation.

Here’s another lesson learned regarding two-pipe buffer tanks: They should only be used when the heat source is turned on and off based on buffer tank temperature.

If the heat source flow rate and load flow rate are about the same, there will be very little flow through the tank. This could lead to the heat source shutting off based on satisfying the space heating, without adding much heat to the tank. In this scenario the tank is not “engaged” in the energy flow streams.

However, when the heat source is controlled directly from tank temperature it will continue to run even after the space heating thermostat is satisfied, banking heat that’s immediately ready to go to the next zone requesting it.

MEETING IN THE MIDDLE What do you get when you “average” a four-pipe buffer with a two-pipe buffer? Answer: A three-pipe buffer.

This configuration has become my preferred arrangement when the heat source is a heat pump. It provides the directto-load possibility on the supply side while also forcing return flow through the lower portion of the tank, and thus ensuring that the tank’s thermal mass is engaged.

Don’t expect much temperature stratification in a buffer tank connected to a hydronic heat pump. The reason is the relatively high flow rate from the heat pump. Most heat pumps have recommended flow rates of 3 gpm per ton (12,000 Btu/h) of capacity. With water as the working fluid that results in a delta-T of only about 8F. A typical 4-ton heat pump operating at these conditions would turn over an 80 gallon buffer in less than seven minutes. Those flow rates, especially if introduced vertically into the tank, will create lots of internal mixing. Whenever possible, pipe the tank so that heated water from the heat source enters the tank horizontally rather than vertically.

It’s worth mentioning that I didn’t always appreciate the benefits of a three-pipe buffer tank, and this concept came from an engineering professor colleague several years ago.

He and I were both working on ways to improve the performance of a system supplied by a pellet boiler. We had inadvertently stumbled across the omission of one of the design details that I mentioned above (e.g., installing a differential pressure valve to prevent flow returning from the load from passing the boiler when it was off).

We also both understood some of the limitations of a fourpipe buffer tank configuration (e.g., time required to warm a large tank before the supply water temperature to the load was up to where it needed to be). My colleague suggested that a compromise between the two configurations might be worth considering.

Continued on p20 DECEMBER 2021 | HPAC

19

< HYDRONICS

Continued from p19

Figure 2. An air-to-water heat pump with a three-pipe buffer tank and highly zoned distribution system.

PUTTING THE PIECES TOGETHER Figure 2 shows a simple template: an air-to-water heat pump, a three-pipe tank and a highly-zoned distribution.

The heat pump supplies a combination of low temp. panel radiators and radiant floor circuits. The panel rad and the floor circuits have been designed to operate at the same supply water temperature. This eliminates the need for mixing valves. Simpler and less expensive is always preferred when possible.

That’s one of the biggest lessons I’ve 20

HPAC | DECEMBER 2021

learned over 40 years in this industry.

The flow and heat output of each circuit is regulated by a non-electric thermostatic valve. A variable-speed pressureregulated circulator automatically adjusts speed based on these valves.

The heat pump is turned on an off to maintain the water temperature at the middle of the buffer tank between 100F/38C and 110F/43C. In addition to buffering the heat pump against short cycling, the tank provides hydraulic separation between the heat pump’s

internal circulator and the variable speed distribution circulator.

This system leverages modern concepts that combine for high energy efficiency, reliability, and comfort. Perhaps you can use it on a future project. <> John Siegenthaler, is a licensed professional engineer. HIs latest book is Heating with Renewable Energy (for more information visit www.hydronicpros.com).

HPACMAG.COM

< HYDRONICS

OPTIMAL TUBING DEPTH IN A SLAB John Siegenthaler details why tubing placement matters in a radiant-heated concrete slab.

BY LOGAN CASWELL

T

he latest instalment of HPAC Magazine’s 30 Mechanical Minutes, the free webinar series, focused on the importance of piping depth in hydronic heating of concrete slabs. HPAC editor, Doug Picklyk, was joined by John Siegenthaler, who explained how tubing depth effects heat transfer. This episode was sponsored

by Arctic Heat Pumps.

Installing a hydronic heating system in a concrete slab requires planning, precision, and a lot of knowledge-based skill.

Siegenthaler explained that much of the thermal performance of the final concrete is determined by how deep the tubing is laid in the slab. “The more concrete that you have over the top of the tubing, the more resistance there is,” he says.

His research shows the optimal position for the pipe is in the centre of the slab, but Siegenthaler has witnessed instances when the tubing ended up at the bottom of a four-inch or even a sixinch slab.

“Don’t let somebody tell you it doesn’t make a difference where the tube is in the slab. It does make a difference, and it’s especially relevant today as we move towards heat pumps and high-performance condensing boilers as the hydronic heat sources.”

He suggests the best way to ensure that tubes attached to a welded wire fabric end up in the middle of the slab is to have one of the masons dedicated to lifting the wire mesh and tubing at 22

HPAC | DECEMBER 2021

Siegenthaler showing the surface temperature and thermal spread on slabs based on different depths of the tubing.

the leading edge during the pour.

Noting the obvious, he insists that it’s important to get things right the first time, because once the concrete is laid there is no turning back.

FINITE ELEMENT ANALYSIS Siegenthaler arrived at his conclusions regarding optimal depth for tubing following the results of computer simulations of different scenarios using Finite Element Analysis (FEA). The FEA models the thermal performance of the concrete slabs using equations and ultimately gives a picture of what’s going on thermally inside the slabs with the tubing at various locations.

He showed simulations using a fourinch slab with a 3/8-in. hardwood floor finish on top. Other constants in the modelling were 100F water temperature, 70F room temperature and oneinch polystyrene insulation under the slab. He notes that different floor finishes would give different thermal re-

sults depending on their lateral heat dispersion qualities.

The mathematical results generated by the FEA program illustrated isotherms radiating from the pipe in contour lines which transferred heat in a lateral direction over the floor above.

Siegenthaler concluded the deeper into the slab the tube is located, the better the lateral heat dispersion.

However, if the tube was placed at the bottom the result is a good lateral heat dispersion but a much lower surface temperature on the floor.

Can the water temperature be adjusted to get a higher thermal floor temperature reading? Yes, but going to a higher water temperature with a modern heat source such as a heat pump is going to penalize the performance of that heat pump, explains Siegenthaler.

Using an example of a typical 1980’s house with a design load which required the floor to deliver about 30 Btu/h per square foot, Siegenthaler HPACMAG.COM

said it would require approximately 120F water if the tube was in the centre of the slab. Moving the tube to the bottom would mean increasing the water temperature to 134F. In the past, that 14F difference could have been accomplished by turning up the mixing controllers, and it would not have had much effect on the overall efficiency. However, it’s not the case today where such an increase in water temperature would have a significant effect on efficiency.

“It’s an important difference, especially if you’re working with modern lowtemperature heat sources like air-to-water heat pumps, geothermal heat pumps or modulating condensing boilers,” says Siegenthaler.

Compare that to a modern efficient house with a design load of 15 Btu/h per square foot. With the tube located in the middle of the slab the optimum water temperature would be 95F com-

HPACMAG.COM

HPAC_ArcticHeat_Aug21.indd 1

pared to 102F if the tube was at the bottom of the slab.

Even this seemingly small 7F increase would still impose a penalty on the coefficient of performance curves on heat pumps.

“You’ll see that definitely does impose a penalty, and remember that’s a lifelong penalty,” said Siegenthaler.

KNOBBY FOAM PANELS Knobby foam panels are a product that have been around in the European market since the 1980s and are widely used where they put the panels over an existing structural slab and pour a thin layer of screed concrete over the top.

The product allows the thin layer to cure and micro-fissures will occur and relieve the tensile stress without causing arbitrary cracking in the finish and avoid having to perform saw cuts. The panels ensure the tubing will stay in place, but Siegenthaler would like more

data from manufacturers on the relationship between the water temperature versus heat output based on varying thicknesses of slabs poured over the product. Because the tubing is in contact with the foam and not entirely encased in concrete alone, as a designer he questions how that effects the overall thermal performance.

Siegenthaler wrapped up the segment with this advice: “If you’re designing hydronic systems today and you’re building around modern heat sources and low water temperatures, I would highly encourage you to get that tubing up off the bottom of the slab ... It’s going to enhance the performance of that heat source for the entire life of the system ... It’s not something that should be trivialized. It’s not something that should be ignored.”

Visit hpacmag.com/tech-pulse to view the entire webinar as well as past editions of 30 Mechanical Minutes. <>

DECEMBER 2021 | HPAC

23

2021-08-04 3:47 PM

< HYDRONICS

WORDS OF WISDOM Sharing reflections on the valuable role mentors have played in one man’s career. BY ROBERT BEAN

I

could (and should) write a book on my career path, it’s been a heck of ride and leaves me speechless when I think about how lucky I was to have so many special people in my life.

Following are a few of the remarkable ones that molded my madness.

ENTREPRENEURSHIP: BEING UNEMPLOYABLE OPENS THE WORLD TO YOUR OWN EMPLOYMENT

24

HPAC | DECEMBER 2021

BUSINESS: DO BUSINESS WITH THOSE WHO HAVE AS MUCH TO LOSE AS YOU I’ll never forget the advice my late wife gave me following the acquisition of De Jaegher Sales. I had just turned 30 and was making my first sales call into Red Deer, Alberta.

My very first visits were to the nationwide wholesalers who proceeded to instruct me not to sell to Gerry Halford at Triangle Supply, and that if I did they would not support our company.

Needless to say, I was shocked but kept my cool. I then went directly to Triangle Supply and discovered that Gerry and I had a lot in common. We both secured our business lines of credit with the bank by using our homes as security, which meant our spouses had to sign away their dowry rights— meaning if the bank took our homes to clear up debt then our wives had no claim against the equity.

Returning home, I shared the story

with Karen and asked for her counsel.

Her words: “I believe in you so much that I am willing to risk my share of the equity in our home, and Gerry’s wife believes in him so much that she did the same. You both have more to lose than the managers at the big wholesalers. Do business with Gerry and you’ll never regret it.”

True story, and Gerry and his righthand-man Barry Cunningham and the team they built went on to become a great corporate citizen for Red Deer and gave back 10-fold to the plumbing and HVAC industry in Canada than what was returned by the individuals who threatened to not do business with us.

Hats off to you Gerry and Barry – love you and miss you. Karen, you win the best advisor award. I miss you and look forward to seeing you again someday.

ENGINEERING: ARCHITECTURAL SYSTEMS SHOULD REFLECT HUMAN SYSTEMS When we sold De Jaegher Sales to Danfoss in 2000 I had to figure out what to do with my life. Having graduated from NAIT’s Building Construction Engineering Technology program, I learned to love high performance architecture and designing radiant-based HVAC systems.

At the time I had obtained the highest level within ASET as a registered HPACMAG.COM

CREDIT: ILYA ANDREEV / ADOBE STOCK

The best conversation my dad had with me in my early teens went like this: “Son, I love you, and because of that I’m letting you know now that you have the personality of someone who is unemployable— not many people have that gift, but you do.” Clearly a compassionate man.

I was raised to believe that it’s good to challenge the status quo (just not at home), blaze new territory and call out BS when it needs to be called out.

I was also coached to: “Dedicate yourself to your passion, and let your work ethic and results speak for themselves.”

As young boys my brothers and I cleaned ducks for 50-cents a bird during hunting seasons, and we also did everything we could from mowing lawns to painting fences and delivering papers.

And I always had side jobs building custom decks for people that had influence.

By the time I was 41 I had five businesses under my belt and played at will in my sixth business from 2001 to my retirement.

Being unemployable is not a curse,

it’s a blessing—embrace it and you’ll never work a day in your life.

My dad passed away in 2020 and with him went a library of knowledge that few possess. We spread his and my brother’s ashes this past summer in the Pacific Ocean at one of our favorite fishing spots with my dad’s fishing guide piloting the boat. I thought a lot about that ceremony the following week as I hiked along the West Coast Trail in view of the places we fished…miss you dad.

engineering technologist in building construction (RET), but that alone would not allow me to practice independently so I wrote the APEGA exams to obtain the Professional Licensee Engineering (P.L. Eng.) designation for mechanical engineering. Once I had my license to practice and stamp drawings I embarked on growing Indoor Climate Consultants Inc. and growing my website www.healthyheating.com.

It was during that time that I really started to listen to the professors in our ASHRAE committees who were focused on human factor design—that is the physical, physiology and psychology of people living and working within the built environment.

Dr. David Scheatzle, Professor Emeritus at Arizona State University, College of Architecture and Environmental Design, was gracious enough to lend us web-based graphics that he and his students developed on thermal comfort.

The graphics had nothing, zero, not a thing to do with HVAC systems, rather they demonstrated the thermal sensory systems of the human body.

Scheatzle and his team did the early work on residential radiant cooling, which to this day continues to influence my design philosophies. During the same period, I discovered the work of Dr. Andrew Marsh who would later sell his SQU1 company to Autodesk.

HPACMAG.COM

Marsh understood how to graphically represent, in a nontechnical way, what people felt inside spaces and how to represent that according to the definitions within ASHRAE Standard 55 and ISO 7730.

He let us use his thermal comfort tool which ultimately drove thousands of visitors to our website, and which we continue to use today to educate the public and design practitioners on human factor design.

The lessons I learned from these and other professors was mechanical solutions should always be the last resort to solving indoor environmental quality problems and that energy use was the consequence of bad architecture.

This philosophy drove the Indoor Climate Consultants Inc. motto: “Design for People, Good Buildings Follow.”

Blame Scheatzle and Marsh for pushing me to think about client complaints from a perspective that has nothing to do with load calculations, sizing and selecting equipment.

It was the best thing that ever happened to my practice and allowed me to earn clients from all over the world.

Thank you gents!

TRADES: NOTHING HAPPENS UNTIL WHAT YOU PUT ON PAPER GETS ASSEMBLED IN THE FIELD Most don’t know this, but out of high

school I started working for a geotechnical engineering company as a lab grunt and then I later moved into the carpentry trade.

I have thousands of hours on the tools in framing and cribbing. Alan Wanagot (a Lithuanian framer) and Manfred Claussen (a German cribber) fed my work ethic and kept me in physical shape. I miss those days!

They also taught me this: everything you put together must be plumb, parallel, perpendicular, straight, square and level.

I was also taught to sacrifice fast for better—it prevents shortcuts and jobs that look like someone dropped a bowl of spaghetti on the site.

Those working in the trades know what it means to have “the eye”: the eye of perfection.

These assembly habits served me well when producing engineered drawings. I still get compliments to this day on the drawings we produced over the years. But most important of all was the ability to express our expectations from the trades. The work we saw from our fabrication shop, and the work I inspected in my engineering practice was going to get “the eye”, and if it wasn’t up to snuff it wasn’t up to our standard.

Alan and Manfred, wherever you are, bless you for not firing me when I screwed up and for imparting upon me the meaning of “excellence in the trades.”

So many others…so much knowledge…I share these lessons from my heroes to you. <> Robert Bean is director of healthyheating.com, and founder of Indoor Climate Consultants Inc. He is a retired engineering technology professional (ASET and APEGA) who specialized in the design of indoor environments and high-performance building systems. He is also a co-host of the Edifice Complex podcast: edificecomplexpodcast.com.

DECEMBER 2021 | HPAC

25

< HYDRONICS

NEW ADVENTURES Recalling early advice and the helping hands that guided a newcomer to Canada along his path in the Canadian hydronics industry. BY MIKE MILLER

P

reparing for this very personal writing assignment, I have to admit that I spent a lot of time reminiscing about many milestones in my now 30 years in this wonderful industry.

The ask was to provide some history of my experience and some valuable lifelong lessons that I have learned along the way. Before I get into some of those details, I want to start by recognizing that I cannot possibly fit into one small article all the individuals who have provided invaluable support, mentorship and guidance to me over these years. That task would literally require a book! Perhaps, someday I’ll find the time to write all that, but I’m not too sure who in the world would take the time out of their busy lives to read it.

THE BEGINNING

26

HPAC | DECEMBER 2021

JOB SEARCH Upon my arrival in Canada, I found it difficult with my broken English to navi-

gate my job search for the first week or two, but I hit the road every morning visiting every heating shop in the lower mainland of British Columbia. Virtually all early attempts ended with no luck.

Fortunately, I ended up finding a company in the Yellow Pages I thought would be a great target for me to hit, a German company name, German owner and they specialized in “European Heat Systems.” Surely I’d be able to communicate better with them?

HPACMAG.COM

CREDIT: OZGURDONMAZ/E+/GETTY IMAGES

I was raised in small village in Southwest Germany, a beautiful and picturesque area on the outskirts of the Black Forest within an hour of the Austrian, Swiss and French borders.

Like many young kids back then, I was a big fan of North American movies, cars, and the huge countryside and wilderness that can be found here.

It was always my dream to immigrate to North America. My family was in support of anything I set out to do, but it was my grandparents who offered the very first advice and guidance that proved to be the beginning of my future. They insisted, before I do anything, that I learn a ‘proper trade’.

Because once that was under my belt I would always have something to fall back on in life, should any other future endeavor not provide me with the opportunities I had hoped. This would eventually become all I’ll ever do!

Back in those days, three of my best school friends applied for an apprenticeship with a company just across the street from my house. This company specialized in heating, ventilation and air conditioning systems, plumbing and wood and gas-fired fireplaces. It was really because of my friends that I chose to sign up with this company as well. Had it not been for them, only God knows what I could have become?

Forward another five years, with my apprenticeship completed I set out to immigrate to Canada. What often takes several months or even years to be processed, if even approved, luckily took me only about five months and I was cleared to move across the pond.

Happening faster than I had prepared for, I ended up facing departure day without having mastered the English language. While we all learned English in school, it wasn’t anywhere near good enough to engage into any real conversations. My thought was that I’d be picking up the language easily enough once I was here? Boy, you folks speak fast over here!

and the owner desperately needed someone.

After hitting it off with the son, I was given the opportunity to come back the following days. At first it was quite a struggle to do my job in different units of measure. Coming from millimeters, centimeters and kW/hrs to inches, feet and Btu/h and so on, took a bit of an adjustment. None the less, I had the most excellent experience during my earliest days in Canada.

If you know the area, you’ll be able to appreciate the view we had of the Vancouver skyline working at the Royal Canadian Yacht Club in Stanley Park installing hydronic heating systems in the biggest of yachts, powered by diesel-fueled boilers and capturing of waste heat off the boat’s engines. My lesson there was: “Persistency can pay off, if not overdone. Patience was the key.”

After a good few months with them, learning the differences between European and North American installations and some English, I wanted to explore more of B.C., so I left to move up north into the Cariboo. Not many heating jobs available there, and I left the industry for about a year before eventually moving to Red Deer, Alberta on my very first Canadian credit card.

RETURN TO HYDRONICS

My initial call with the owner went well. He did speak my language, and we had a good chat. Problem was, he was a small family-run business with just him, his son and a helper. He didn’t need anybody and wished me well.

Continuing to look elsewhere without luck, I took a chance and kept going back to that same business daily to see if anything had changed. Luck was on my side. On the third day I called the helper failed to show up that morning HPACMAG.COM

It was in Red Deer that I ran into the two individuals who really gave me another chance to return to my industry.

Those folks were Gerry Halford and Barry Cunningham. They saw something in me that not even I knew at that time, and they gave me an opportunity to work in the hydronic heating department of their supply company. On my very first day, Barry gave me an IBR booklet that teaches you how to go through a building heat loss.

He gave me that and a blueprint then sent me home to do a full analysis of a project. Even then, we had plenty of stellar software solutions that would have accomplished this same task in minutes. Not thinking much of it, I com-

pleted the challenge over the weekend and proudly turned it in on Monday.

Of course, I had to ask why he wouldn’t just let me use the much easier software? His reasoning was something I have taken with me for the rest of my career. Software is there to help make your life easier, but it doesn’t replace having the knowledge of how this science comes together. In Barry’s words: “When you use the software, you still need to know how it actually works in order to capture any potential for errors during the input of the data.”

Barry and Gerry are life-long mentors and folks I will forever respect for all they taught me, but also for the opportunities they gave me to learn more about this business beyond what I already knew from the installation side of things.

CONTROLS I was sent to several training and tradeshow events, one of which was my very first tekmar Controls training session in Calgary. In came this (then) young fellow by the name of Greg Leupin. He spent a full two days teaching the class on hydronic systems and control solutions.

Being completely honest here, the material was WAY over my head. I struggled with the terminology and even some of the reasoning he explained.

But, it turned out that Greg stayed at the same hotel as me, and I luckily ran into him that evening in the restaurant.

When I approached him and told him of my struggles, Greg took the time out of his evening to explain things in even more detail. If it wasn’t for his generosity of time, it would have taken me much longer for the logic to fall into place. He helped me get up and running that evening and later became a long-time friend and mentor that I could call upon when I needed help.

ASSOCIATION, ASSOCIATIONS Barry also allowed me to attend the Foothills Conference, a conference Continued on p30 DECEMBER 2021 | HPAC

27

Keywords

Location

Distance

Search

< HYDRONICS

Continued from p27

that was hosted by the Alberta Hydronics Advisory Committee (AHAC), a group of like-minded individuals that formed this association to help share industry knowledge and help develop young techs.

Later, the group also became very influential in the early phases of what is known today as the CSA B214 Hydronics Installations Code. Through this group I met several others who first became mentors and educators and later friends.

The list is long, but to name a few it includes: Dave Hughes, Gary Alexander, Roy Collver, Bill Benson (RIP) and Robert Bean.

What all of these guys shared is an unimaginable amount of knowledge and passion for this industry. And best yet, their willingness to sit down with literally anybody who wanted to listen to what they had to share.

I would spend hours, days and weeks going and listening to them every time they had something to say. Over the course of time I was able to pick up some of this knowledge that helped me along my career and again, they all became lifelong friends.

They also introduced me to internationally renowned industry greats such as John Siegenthaler and Dan Holohan, again two more individuals who go out of their way to mentor

Custom Built Retrofit Fan Coil Systems for Apartments & Condos Saving you and your customers time and unnecessary cost Installation of our high quality, custom-sized systems virtually eliminates all drywall, painting and finishing work while delivering, highly efficient, whisper quite comfort!

OUR PRODUCTS ARE: • Canadian made • Carry up to 5 year warranties • Available in both vertical and horizontal configurations

“Before you do anything else in life, learn a proper trade.”

- Grandparents and share their knowledge with anybody who will listen.

All of these fine individuals I will forever hold dear in my heart and will forever be grateful for because without them and the time they dedicated to me, an unknown young immigrant, I never would have been able to grow my own knowledge and see beyond my field of experience at that time.

I admire the relentless passion they shared and their continued dedication to commit to the betterment of this industry, often with their own time and dime, by volunteering efforts in several industry associations. They also taught me that if you feel that the industry needs to change or pursue new opportunities the best way to make something happen is to get involved.

Having now been in this industry for as long as I have, from installations to wholesale distribution and now for over two decades on the manufacturing side, I have followed their lead and guidance and have been involved in all major industry associations.

My parting words of advice to any young up-and-coming individual is this: This is the very greatest of industries filled with individuals who share unmatched dedication, passion and knowledge. You can make an absolutely rewarding career in this field.

Most hydronics folks I’ve met in my time are incredible and humble humans that are very approachable and willing to share anything they know. They believe that together we will always be stronger and more successful than any one of us can be alone.

Go approach any of them, it’s worth your time.

If you have some time to spare, get involved in local associations. Most will welcome you with open arms. We know there is much work that has yet to be done and not enough time or people to get it all accomplished. Fresh minds bring fresh ideas, and these are invaluable assets to any association, or business for that matter. <>

INNER-COOL SYSTEMS

Contact us at 905-766-1513 and visit us online at inner-coolsystems.ca to check out our range of customizable options and our engineering excellence!

30

HPAC | DECEMBER 2021

HPAC_Inner_Cool_Feb_2021.indd 1

Mike Miller is vice president of sales, Canada with Taco Comfort Solutions and a past chair of the Canadian Hydronics Council (CHC). He can be reached at hydronicsmike@tacocomfort.com.

HPACMAG.COM 2021-01-19 12:01 PM

SEAMLESS INTEGRATION. ALL YOUR HYDRONIC NEEDS IN ONE PLACE. From hydronic heating controls to mixing valves, Resideo Water Solutions are designed to work together to make your job easier. And now with our newly expanded hydronic portfolio you can get all your hydronic parts in one place – saving you time, labor, parts and money.

Visit at Resideo.com/pro/water

© 2020 Resideo Technologies, Inc.

resideo.com

< HYDRONICS

ONE CONTROL TO RULE THEM ALL How I got here and what I’ve learned about this industry. BY CURTIS BENNETT

I

PHOTO CREDIT: SIERRA / ADOBE STOCK

love The Lord of the Rings. My family and I do what we call a “Lord-a-thon” each year in December. We get together as we watch each movie until they are all done, all six of them, including the The Hobbit, of course. If you’re not familiar with the J.R.R. Tolkien series, the basic premise behind the movies is there is one Ring to rule them all.

This reminds me of the time Tom Hermann and I were sitting on the plane heading from Calgary to the CMPX Show in Toronto for the first time. I had just finished our initial prototype of the CPU1000, a boiler controller. It was only a raw circuit board and would only “run” hooked up to my computer. Tom and I stared down at it while on the plane, and we talked about how this one control was going to take over the industry—one control to rule them all. We loved it. I had worked on it for almost two years by this point, and it was my baby.

Drawing inspiration from Lord of the Rings: one ring to rule them all.

years of history in the hydronics field, saw something in me back then that has now worked out for a very long time. HBX Controls has been a thriving company for almost 20 years now, and I am proud to be part owner in it.

INTRODUCTIONS WHAT IS HYDRONICS?

INTRODUCTION My hydronics industry origin story goes like this: Tom Hermann, the “H” in HBX controls, called me up out of the blue while I was working in a different industry. He found my name through the grapevine somehow.

I was a skateboarding backwardshat-wearing kid, as Tom would say back then. He needed some help with a pump exercising board. This led to a couple other small projects before evolving into to a business partnership and the formation of HBX Controls in 2002. After all what kind of a name is “H” controls.

Tom, a mechanical engineer with 32

HPAC | DECEMBER 2021

very entrenched industry, and change, no matter what industry, is never an easy road. So I would have to say that Tom has been my number one influence in this industry, hands down.

When I first started out in the HVAC industry, I thought, “What the heck is hydronics?” I had never even heard of it (one reason we need to get the word out there more, but that is a whole other topic for another day).

I had been working with electronics and designing for a while, but I was enamoured with the idea of starting a new adventure. I would sit in Tom’s office for hours going over design possibilities and other controls. All we would do was talk controls and hydronics.

I knew that I would need to know everything there is to know about hydronics in order to build the best controls possible. We were going to take on a

It was after I started to get to know the industry a little better that we were finally ready to launch our first product at the Foothills Conference in Edmonton. I had never even done a tradeshow before, and I was so excited. And on top of everything, I was asked to do a presentation on P.I.D. [Proportional Integral Derivative control], one of my favorite topics. I was very nervous, and I did not to want to screw up in front of all these people.

At the time I did not know a lot of people in our industry from outside of Alberta, but I did know of one—John Siegenthaler. Everyone in this business knows John, and he was at my presentation, which made me even more nervous.

As far as I could tell the seminar went HPACMAG.COM

well, at least I didn’t throw up from nerves. The next year I happened to bump into John at the massive ISH trade show over in Germany. I did not expect what happened next.

He struck up a conversation with me, and we chatted for about half-an-hour.

We talked about a lot of things, like the industry in general, where things might be going, and how he loved solar technology. My main take-away was that John treated me like an equal, something I did not expect being so new in the industry.

Since then, John and I still chat at trade shows and sometimes throw around control ideas, which I enjoy a lot.

KNOWLEDGE SHARING The “physiological effects of radiant heating” was something I first learned about while sitting at a seminar led by Robert Bean. It was one of the most important aspects of hydronic heating I had ever heard.

Robert is a genius at putting these aspects of hydronics and radiant heating into perspective. I did not really know Robert at this point, but with him also being from Calgary we would bump into each other a lot.

Like John, Robert treated me like an equal right from the start. This seemed to be a trend in the industry—something I have found did not end with John and Robert.

Robert would also, when we would see each other, make time to chat about not only our industry but business and other things as well. I got to know Robert over the years well enough to even go out for dinner and pick his brain about certain things that I think we both share a passion for.

Both John and Robert have a genuine love for the HVAC industry and hydronics, and well for that matter so do I. Something I think we all share, is we all want to see this segment of the in-

dustry grow into something that becomes a household name. Radiant heating, hydronics, physiological effects, should all be words that everyone knows.

The approach that John and Robert take in teaching and lifting the industry is great. They have helped me see that this industry is big enough to touch a lot of people, but it’s also small enough that we can all become much more than acquaintances. <> Curtis Bennett C.E.T is the product development manager at HBX Control Systems in Calgary. He formed HBX with Tom Hermann in 2002. Its controls are designed, engineered and manufactured in Canada to accommodate a range of hydronic heating and cooling needs found in residential, commercial and industrial design applications.

Become a BOILER CONTRACTOR Pro Dealer Installer Reminders Referrals & Rewards

Baxi Pro Dealers can start earning rewards today! Ask us how!

www.baxiboilers.com

Contact us for more information: (519) 627-0791 customerservice@mordennational.com HPACMAG.COM

HPAC_ECR_March21.indd HPAC_Baxi_Oct21.indd 1 1

DECEMBER 2021 | HPAC

33

2021-02-11 2021-09-23 11:57 3:36 PM AM

MECHANICAL SUPPLY NEWS MANUFACTURERS • DISTRIBUTORS • WHOLESALERS

HAPPY RETIREMENT Viessmann Canada held a celebration at the company’s Waterloo, Ont. headquarters on November 22nd for outgoing president Harald Prell (HP) who is retiring after 41 years with the company.

Prell first joined Viessmann in 1980 as an assistant general manager. He was promoted to general manager of North American operations in 1986, and in 1990 he established Viessmann US in Warwick, Rhode Island. He was later appointed president of Viessmann Canada in 2010.

34

HPAC | DECEMBER 2021

Scholarship awarded to Charles-Olivier Duquette (centre), from Louis Beaulieu, president/CEO Ouellet Canada (right) and Miguel Robichaud, engineering manager Ouellet Canada.

OUELLET SCHOLARSHIP PRESENTATION Ouellet Canada has awarded the Électro-Fédération Canada (EFC) scholarship to Charles-Olivier Duquette, a mechanical engineering student at Cégep Limoilou. The scholarship, which is worth $3,500, is to support students so they can achieve and realize their career aspirations. Ouellet Canada is a subsidiary of the Ouellet Group, a Quebec manufacturer of electric heating products and distributor of air-conditioning products. ouellet.com

DANFOSS CELEBRATES NEW CANADIAN OFFICE On September 23, Danfoss welcomed employees and guests to their new Canada office and training centre in Oakville, ON to celebrate a ribbon-cutting ceremony.

Officially opening in December 2020, the event was delayed due to COVID-19. The office employs 36 people from three business segments: Danfoss Climate Solutions, Danfoss Drives and Danfoss Power Solutions.

Additionally, the office houses a training centre as John Galyen, president Danfoss North America, well as meeting and event space. and Randy Ross, senior Danfoss has operated in Canada for 69 years. manager of HR for Danfoss In other Danfoss news, the company has broken in Canada, officially open the new Danfoss office and ground on a new 167,000 sq. ft. manufacturing fa- training centre in Oakville, cility in Tallahassee, Florida. Scheduled for comple- Ontario. tion in early 2023, the new facility will host manufacturing of Turbocor compressors. The award-winning compressors use magnetic-bearing technology instead of oil and provide a low-carbon and ultralow global warming potential (GWP) cooling option for commercial air conditioning and refrigeration units. danfoss.com HPACMAG.COM

PHOTOS COURTESY VIESSMANN/DANFOSS/OUELLET

DURAVENT ACQUIRES HART AND COOLEY DuraVent has acquired Michigan-based Hart and Cooley, bringing together two HVAC industry venting pioneers.

Operating since 1901, Hart and Cooley’s product portfolio includes residential and commercial products including grilles, registers, diffusers, commercial and residential venting and chimney systems, and air filtration products and systems. The company owns facilities throughout Canada, the U.S. and Mexico.

DuraVent, venting and chimney specialists, also owns Security Chimneys in Montreal.

“Our immediate objective is to build one unified company, with one team, focused on world-class manufacturing and distribution,” said DuraVent president and CEO Simon Davis in announcing the deal. duraventfiltration.com

CIPH ESTABLISHES WOMEN OF DISTINCTION AWARD The Canadian Institute of Plumbing and Heating (CIPH) Board has approved a new award to recognize women in CIPH with outstanding leadership. At the request of the CIPH Women’s Network the award was approved by the Board and will be named the CIPH Women of Distinction Award.

To be considered, nominees must demonstrate commitment to mentoring, developing and promoting women in the plumbing and heating industry through their leadership. The award is based on the following criteria: a minimum of 12 years in the plumbing and heating industry (with a CIPH member company); minimum four years of service on any CIPH committee or council; and a maximum of two women per year can receive the Award.

The deadline for nominations for the first annual is February 1st, 2022. ciph.com

PHOTO COURTESY UPONOR

Hutchinson building in Minnesota is undergoing 25,000 sq. ft. reno.

UPONOR EXPANDING TWO MANUFACTURING PLANTS To help meet growing demands for PEX pipe, Uponor North America is expanding its manufacturing capacity in Minnesota. The company’s Lakeville distribution center, originally built in 2009, is adding 57,000 sq. ft. (a US$5 million project scheduled for completion in June 2022), and its Hutchinson facility, acquired in 2017, is adding 25,000 sq. ft. also at a cost of US$5 million (scheduled to be complete in May 2022).

“As we enter the post-pandemic business climate, Uponor is positioning itself to increase capacity and productivity to effectively meet customer demand for our product,” says Bill Gray, president, Uponor North America.

After completion of both expansions in 2022, the total Uponor North America building square footage will exceed one million. uponor.com A.O. SMITH ACQUIRES GIANT FACTORIES Wisconsin-based A.O. Smith has acquired Giant Factories, the Quebec-based manufacturer of residential and commercial water heaters, for US$192 million.

A family-owned business founded in 1945, Giant markets its water heaters under the Giant brand and employs more than 300 people, primarily in Canada. Giant manufactures water heaters at two facilities in Montreal and sells its products across the country.

Claude Lesage, Giant Factories, Inc, president, commented, “We are extremely excited about the benefits of a

powerful combination with a world leader in global water technology. This natural and logical partnership with A. O. Smith will enhance prospects for our customers, employees, and suppliers.”

The addition of Giant to A. O. Smith’s existing water heater operations helps grow the company’s presence in the Canadian water heater market, which is characterized by a high percentage of replacement demand.

The purchase of Giant also supports A. O. Smith’s decarbonization efforts by increasing the amount of electric-powered water heating products in its portfolio supplied by a renewable energy grid – as a number of Canadian provinces, Giant’s end markets, are mainly served by an electrical grid that is primarily hydro-sourced and non-carbon intensive. aosmith.com giantinc.com

DISTRIBUTION >> Saniflo Canada Selects Jones Goodridge for Mid-West Canada Saniflo Canada has announced Jones Goodridge as its new plumbing wholesale-channel representative for Mid-Western Canada.

Jones Goodridge serves residential and commercial plumbing and heating markets with offices in Winnipeg, Saskatoon and Regina.

“It is with great pleasure that Saniflo Canada welcomes Jones Goodridge to our sales representative network,” says Phil Warren, national sales manager for Saniflo Canada.

“Their in-depth product and application knowledge will be an outstanding complement to our team.” saniflo.ca jonesgoodridge.com Continued on p36

UL 60335-2-40 RECERTIFICATION The biggest changes coming to the HVAC industry in the next five years are recertification to UL 60335-2-40. Intertek can help manufacturers during the transition period.

FOR MORE INFORMATION +1 800 WORLDLAB (967 5352) icenter@intertek.com Intertek.com/HVACR

DECEMBER 2021 | HPAC

HPACMAG.COM HPAC_Intertek_Dec21.indd 1

35

2021-10-29 10:33 AM

PHOTO CREDIT: MIKE PALMER (@ROAMINGFOCUS)

< MSN

Continued from p35

LAUNCH OF J.B. SALES & ASSOC. J.B. Sales & Associates Inc. is a new manufacturer’s representative launched in Ontario.

Joe Biffis, president of the new company, has announced a new partnership with Ion Technologies for sales representation in the Joe Biffis Ontario plumbing and waterproofing market.

Biffis has spent the last 22 years in the plumbing wholesale industry with extensive experience in sump and sewage pumping products. J.B. Sales will be introducing Ion Technologies’ new digital pump controllers, used in place of standard float switches and alarms, along with Ion’s residential wastewater pumps. jbsales.ca VIEGA REPLACING PRINTED INSTRUCTIONS WITH QR CODES In a move to reduce paper waste by 32 tons a year, Viega has announced it will be eliminating printed instructions in favour of QR codes for some products, including most ProPress, MegaPress and PureFlow products made in the U.S. viega.us

NEXT SUPPLY PERFORMS AT CHARITY ROAD HOCKEY EVENT Next Plumbing and Hydronics Supply was awarded the Corporate Challenge Cup for contributing the most funds for the 10th annual Road Hockey to Conquer Cancer event in Toronto, in support of the Princess Margaret Cancer Centre. Through generous support from staff, friends, family, industry, customers, vendor sponsorship and fundraising events, Next delivered over $420,000 to the event.

Overall the day-long road hockey tournament raised just over $2-million with 115 teams and roughly 1,400 players.

The top fundraising teams were able to draft celebrity players to face-off with their team. Next Supply had four teams achieve the goal, drafting Ken Reid, Jeremy Roenick, Carlo Coliacavo and Laura Fortino. roadhockeytoconquercancer.ca

< PEOPLE

EASY. SAFE. FREE.

THERMOSTAT RECYCLING

We recycle all elements of the thermostat; plastic, metal, electronics and mercury (which is particularly hazardous).

Do your part and join the more than 1,500 contractors already participating in the program.

FOR MORE INFORMATION www.hrai.ca/trp 905-602-4710 trp@hrai.ca

36

Administered & delivered by: Supported by:

Viessmann has announced the promotion of Jerry Leyte to the role of president and general manager of Viessmann Canada as of January 1, 2022, replacing Harald Prell, who is retiring.

Leyte Leyte joined Viessmann as director of sales and marketing in February, 2018, and prior to that was sales manager for Central Canada at Uponor. Born in Newfoundland and Labrador, he moved to PEI as a teenager and has a Bachelor of Engineering and Masters of Applied Science from the Technical University of Nova Scotia.

Tosot Bathica of Chateauguay, Quebec, has named Gerry Wagner, vice president of business development for the TOSOT brand of HVAC equipment in Canada. Wagner has 41 years in the Wagner HVAC/R industry working in manufacturing, contracting and training and will be responsible for developing and implementing product training as well as multi-media training materials for dealers and distributors.

Superior Boiler named Matt Steele as vice president, sales and marketing responsible for the company's full portfolio of products. Steele joins Superior after working in executive sales and operations positions for a technical manufacturer. . Steele

HPAC | DECEMBER 2021

HPAC_March_TRP.indd 11 HPAC_HRAI_Feb21.indd

HPACMAG.COM 2021-02-08 2019-02-26 11:37 11:27 AM

AHR EXPO >

THE AHR EXPO RETURNS TO LAS VEGAS The international HVAC/R community will gather again for North America’s largest trade show and conference. BY LOGAN CASWELL

IMAGE COURTESY AHR EXPO

T

he 2022 international Air-Conditioning, Heating, Refrigeration Exposition (AHR Expo) is returning in-person with the three-day conference and expo spanning from Jan. 31 – Feb 2 at the Las Vegas Convention Center.

The annual AHR Expo, co-sponsored

by ASHRAE and the Air Conditioning, Heating and Refrigeration Institute (AHRI), was interrupted last year due to the pandemic, but show officials met in Las Vegas in mid-October for a Joint Expo Policy Committee meeting to evaluate the site and confirm processes and procedures for the 2022 event.

“We want exhibitors and attendees of the 2022 AHR Expo to be assured that safety is a top priority as we return to our first in-person show since 2020,” said Jeff Littleton, ASHRAE executive vice president, in a release following the October meeting. “While we are aware of the concerns regarding the HPACMAG.COM

evolving state of the COVID-19 pandemic, AHR Expo Show Management, AHRI and ASHRAE are committed to taking every precaution possible to provide a safe, inclusive, and welcoming atmosphere, in full compliance with all public health guidelines. We are thrilled to welcome everyone back to this industry-leading event, where ideas and emerging HVACR technologies will be shared.”

EDUCATIONAL OPPORTUNITIES Like every edition of the AHR Expo since 1930, manufactures and suppliers from around the world will be on hand to showcase the latest additions to their product line-ups, feature technology innovations and provide technical support for any attendee questions.

Educational programming at the Expo will also feature nearly 200 free seminars, new product and technology

DATES AND TIMES Monday, Jan. 31, 2022 Hours: 10:00 am – 6:00 pm Tuesday, Feb. 1, 2022 Hours: 10:00 am – 6:00 pm Wednesday, Feb. 2, 2021 Hours: 10:00 am – 4:00 pm www.ahrexpo.com presentations.

“The Education Program aims to complement what attendees experience on the show floor,” said show manager, Mark Stevens in a media release. “Our manufacturers pack the hall with all the latest products and technologies in their exhibits and our speakers build on this in areas that support professional career development, training and updated industry information.”

Among the events this year is the return of the AHR Expo HVAC/R trend discussions led by members of the AHR Continued on p38 DECEMBER 2021 | HPAC

37

< AHR EXPO

Continued from p37

2022 AHR Innovation Awards

The 2022 AHR Expo Innovation Award winners have been announced well in advance of the live trade show event scheduled for Jan. 31 – Feb. 2, in Las Vegas.

The winners were selected by a panel of third-party ASHRAE judges who evaluated entries based on innovative design, creativity, application, value and market impact.

The annual award-winners represent the most innovative products and technologies due to hit the market in the coming year.

The 2022 Awards were chosen in 10 categories including: building automation, cooling, heating, indoor air quality, plumbing, refrigeration, software, sustainable solutions, tools & instruments, and ventilation.

BUILDING AUTOMATION

The iSMA-B-MAC36NL Hybrid Controller powered by Niagara Framework The iSMA-B-MAC36NL master application controller family provides an all-in-one solution for mini building management systems (BMS). Powered by the Niagara Framework, visuals can be displayed and controlled via HDMI output and two USB ports that enable the connection of a mouse/keyboard or dedicated touch for the HMI panel. The onboard M-Bus port, two ethernet ports, and the RS485 port can be integrated with just one device. All of the features of the controller are managed by dedicated modules in Niagara Framework to speed up the installation process.

COOLING

The new Turbocor VTCA400 compressor from Danfoss offers improvements on traditional centrifugal compressor designs that are large in physical size. It uses a patent-pending hybrid compression design that uses a combination of mixed flow and radial impellers enabling both high-performance and a compact footprint. It also maintains a 10% improvement in full load efficiency and 30% improvement in integrated part-load value (IPLV) above ASHRAE 90.1-2019 minimums when considering a three compressor 1,200-ton system.

HEATING

The Infinity 24 heat pump with Greenspeed Intelligence from Carrier offers up to 24 SEER (seasonal energy efficiency ratio) and 13 HSPF (heating season performance factor) for premium energy savings. Its variable speed compressor allows it to adapt its output to the needs of the home with infinite adjustments between 25 – 100% capacity. Its humidity control can remove up to four times more moisture than standard systems.

Expo Expert Council, and added to the roster is a panel discussion that will delve into the current state of the HVAC/R industry.

Panelists for the state of the industry discussion include moderator Bryan Orr, host of the HVAC School podcast; Mick Schwedler, president of ASHRAE; Stephen Yurek, president/CEO of AHRI; Talbot Gee, CEO of HARDI; Roberta MacGillivray, 2022 president of NAFA; and Rob Falke, president of NCI. Other free seminar sessions during the show will include topics such as: 5G Hydronics (fifth generation of district systems); Role of Boilers in the Age of Decarbonization; HVAC Duct Construction Standards - Metal & Flexible; The Industry Transition To A2L Refrigerants—Where Are We and Where Are We Headed?; How to Prevent Callbacks and Warranty Returns; The Lead-Generation & Sales Process Shift in the HVAC Industry; and more.

In addition, there will be ASHRAE Conference sessions, product and technology presentations, and professional development seminars available throughout the event. A few of the topics include; The New Metric for HVAC Equipment and Refrigerants; Solar Thermal Hydronic System Technology; and Navigating to Smarter Sustainable BAS. These represent just a few of the 100’s of learning opportunities available.

For engineering professionals, the ASHRAE Learning Institute (ALI) will offer a full slate of instructor-led seminars and short-courses where professional development hours and continuing education credits will be available.

NETWORKING Key to any industry gathering, and especially in a trade show hall, throughout the event attendrees will be face-toface with a wide variety of HVAC/R professionals which will help maintain and grow existing relationships and open Continued on p40

38

HPAC | DECEMBER 2021

HPACMAG.COM

eXPand Your Indoor Air Quality Investigations MEASURE MASS AND IAQ GASES WITH TSI’S NEWEST INSTRUMENT Having a multi-parameter IAQ instrument that can be configured, customized and expanded to monitor and maintain optimal indoor air quality is important, and can save you a lot of time. With the new Q-Trak™ XP Indoor Air Quality Monitor, you can measure: + Up to 20 IAQ measurements simultaneously + Up to 6 different types of gases + PM2.5 and PM10 mass concentrations and particle counts + Temperature and relative humidity + Large data logging capacity

IDEAL FOR: + IAQ surveys and investigations + IAQ compliance testing in schools and commercial buildings + Evaluating thermal comfort

See us at AHR Booth C4715 To learn more, visit

tsi.com/Q-Trak-HPAC

< AHR EXPO

Continued from p38

doors to new networks and channels.

The AHR Expo podcast pavilion will also give anyone attending the event the chance to meet some of the industry’s popular podcasters in person.

Live interviews, giveaways and meet and greets will all be held.

The show organizers are anticipating there will be more than 1,000 different exhibitors at the 2022 show. For this reason, attendees who pre-register for the event can skip the lines with a special badge and navigate the event with the help of the online My Show Planner. The digital tool can help visitors to the AHR Expo website plan and map out potential stops along their show experience.

2022 AHR Innovation Awards PLUMBING

Franklin Electric’s Inline 1100 SpecPAK pressure boosting system is small enough to hang in a small utility closet or be wall hung where floor space is at a premium. The system’s constant pressure pumps are quiet, compact, self-contained, and versatile. Both the suction and discharge headers are sized to accommodate the flow rate from the maximum speed of four pumps. It is easy to disconnect from the main panel which allows customers to disconnect each pump individually with minimal system disruption.

SAFETY PROTOCOLS While recommendations will continue to be updated as the show dates approach, as of the publication date the show management is planning to implement the following safety measures: • Masks will be required for all attendees indoors • No masks will be required in outdoor spaces • Social distancing in small areas such as bathrooms will be encouraged • A designated first aid area will be provided for any immediate needs • Hand sanitizer stations will be located throughout the building “AHRI and our member manufacturers are very much looking forward to reconvening the industry at the 2022 AHR Expo in Las Vegas,” said AHRI president/CEO Stephen Yurek in a show release. “The Expo is truly where the global industry meets, and having the manufacturers, distributors, contractors, technicians, and engineers gathered once again under one roof will reconnect us and reinvigorate our shared goal of providing the most innovative, most energy-efficient equipment to improve the health, safety, and comfort of our customers.” ahrexpo.com. <> 40

HPAC | DECEMBER 2021

INDOOR AIR QUALITY

Antrum’s patented AntrumX sensing technology monitors indoor air quality (IAQ) for 32 spaces from a single location, using one sensor for every 16 rooms. Consolidating one centralized sensor for multiple spaces increases sensor accessibility while ensuring better overall control.

Additionally, the AntrumX has the ability to transport air without moving parts. Leveraging a building’s pressure differential between supply and exhaust, AntrumX is able to move air samples from each space to the Sensor Pack without adding energy to the system.

REFRIGERATION

The AxiEco 630-910 axial fan from Ebm-papst incorporates new impeller geometry with a rotating diffuser and optimized blade design to reach a low noise level and high-efficiency.

The steep air performance curve provides a pressure increase of more than 700 Pa. With a maximum air flow of up to 30,000 m³/h, the AxiEco 630-910 covers a wide range of different applications, especially those where high-efficiency and high back pressure are key.

SOFTWARE

The Bluon Support Platform is a free mobile application for iOS or Android devices that serves as a centralized hub for HVAC technicians. The app provides detailed HVAC system information, just-in-time training, best practices and 24/7 live tech support.

It offers a database of some 40,000 HVAC model numbers spanning over 75 brands with 75,000-plus original manuals, troubleshooting guides, wiring diagrams, and technical specifications, as well as “pro-hacks” for a wide range of situations, easy-to-use calculators for SH/ SC, airflow, pressure setpoints and TXV sizing and more.

HPACMAG.COM

SUSTAINABLE SOLUTIONS

Enginuity's The E/ONE Home Power System from Enginuity Power Systems is a modern rethinking of a classic combined heat and power (CHP) system. Using natural gas, the E/ONE produces both electricity and heat for homes or businesses. The system can make more power than the home or business requires, and where available the additional power can be sold back to the grid. The E/ ONE is also an alternative to conventional backup generators.

TOOLS & INSTRUMENTS

Winner: Fluke Corporation, Fluke 378 Non-Contact Voltage True-rms AC/DC Clamp Meter with iFlex The Fluke 378 FC true-rms clamp meter uses FieldSense technology to make testing faster and safer, all without contacting a live conductor. The meter measures accurate voltage and current measurements through the clamp jaw. The 378 FC clamp meter includes a PQ function that senses power quality issues automatically. When making FieldSense measurements, the meter will detect and display power quality issues, relating to current, voltage, power factor or any combination of the three.

TOGETHER, WE’ve PUMPED

A LOT OF WATER IN 80 YEARS

VENTILATION

The Aldes InspirAIR Fresh energy-recovery ventilator (ERV) features a newly-developed counterflow enthalpic core and unique fan scrolls to ensure 75% sensible recovery efficiency at 32F as tested to the new CSA 439 standard. The system produces fresh filtered air due to variable speed EC motors that adjust speed to changes in pressure due to stack effect and filter loading. The InspirAir Fresh is designed to provide optimal fresh air, regardless of filter type. ERVs are rated for use with a basic filter, and when using a MERV13 or HEPA filter, the airflow is reduced.

There’s a reason we’ve been the go-to pump for HVAC, Plumbing, Pool, and Hydroponics professionals for generations: experience.

For 80 years, Little Giant® products have stood the test of time, pumping a steady flow of proven reliability in the most demanding applications.

Visit Us At Booth C4334 littlegiant.com

LG_Brand_Lift_Trio_Print_Ad_Horizontal_AHR.indd 1

HPACMAG.COM

HPAC_Franklin_Dec21.indd 1

11/18/21 1:20 PM

DECEMBER 2021 | HPAC

41

2021-11-18 2:21 PM

< PLUMBING

GRAVITY IS FREE The greatest lessons learned on the job come from making mistakes in the first place.

BY STEVE GOLDIE

“Tell me and I forget. Teach me and I may remember. Involve me and I learn.”

- Benjamin Franklin

F

42

HPAC | DECEMBER 2021

Continued on p44 HPACMAG.COM

CREDIT: KUBAIS/ADOBE STOCK

or all of us learning should be a lifelong journey, and the further along we go, the more we realize how elusive the destination truly is.

One of the biggest obstacles to learning is the belief that we already know it all. I think this is true in almost all areas of life and in all of the roles we play. Our professional lives, no matter how “professional” we may be, are no exception.

I remember early in life as a young plumber, likely when I was still an apprentice, I took on a “side” job with an equally young carpenter who worked for a general contractor my father and I did work for. Side jobs, or weekend jobs, are a bit of a rite of passage for budding trades people. They are a way to make a few extra dollars and gain some experience as an independent contractor. For me the job seemed straightforward enough, it was a basement reno with a new bathroom.

Working under my father’s tutelage I had been involved in countless similar projects, and I was confident I knew everything I needed to know to complete this on my own.

Roughing in water lines, drains and vents was routine stuff for me at this point. The only complicating factor on this job was the fact that the house, a beautiful grand older home, had once upon a time been on a septic system and the main

drain and stack were higher than the basement floor. This meant the drains for the new basement bathroom would need to be piped into a sewage pit and pumped up to the main stack via a sewage ejector. I had installed sump and sewage pits and pumps before, so this also seemed routine.

The new bathroom was in the rear corner of the house, close to where the main stack exited through the basement wall, about four feet above the floor.

We installed the sewage pit right underneath this drain stack, and I came up with a “brilliant” idea. Rather than cut a wye connection into the four-inch hub and spigot cast iron stack to accommodate the pumped basement line, I would reroute the entire stack into the sewage pit and then simply pipe the two-inch pumped outlet directly into the stack outlet.

My carpenter partner agreed that it was a great idea since it eliminated much of the large cast iron stack and freed up some space, making his job easier. Everyone wins!

I am sure most of you have spotted the error in my thinking.

It is so very obvious to me now it is hard to admit I was ever this foolish. I don’t recall how my father found out about it, perhaps I was boasting about how clever I was, but he wasted no time and spared no colourful adjectives in letting me know what a complete and utter buffoon I was. Gravity, he explained, was free. It never broke down, never took a day off, and always worked even if the power failed.

A New Era of the Infiniti Tankless® Series Has Been Born

Introducing the Infiniti® With an integrated recirculating pump, the new Infiniti® L provides INSTANT endless hot water to every faucet in the home – even the farthest faucet!

The Infiniti® L includes: • Easy Installation. Built For The Pro® for easier installation and maintenance. Includes built-in flush ports and more room to work under the cover.

• Flexible Venting. Can vent with 2” or 3” PVC or polypropylene up to a max length of 280ft.

• SRTTM Scale Reduction Technology for improved performance, longer life and easier maintenance.

• Steadiset® Technology to keep the water temperature accurate and consistent for an endless supply of perfectly-hot water.

• Outstanding Efficiency. ENERGY STAR® certified up to .96 UEF.

Can’t Wait? Visit bradfordwhite.com/infinitiseries

©2021, Bradford White Corporation. All rights reserved. BWHPAC12211

< PLUMBING

Continued from p42

My brilliant idea of re-routing the main stack for the house through the sewage ejector meant that in the event of a power outage, or inevitable pump failure, it would not simply be the basement washroom that would be rendered useless, but the entire plumbing system for the whole house.

Even worse, if the homeowners continued to use the plumbing, the basement would soon be filled with raw sewage. Even though this was my job and not his, my father made it clear to me that I would have to re-pipe and correct my mistake, regardless of how much time, money or bruised ego it would cost me—a hard lesson learned.

Looking back I am staggered by my own stupidity, and although I may not have been grateful at the time, I am very fortunate to have benefitted from the wisdom and experience of my dad.

44

HPAC | DECEMBER 2021

HPAC_JBSales_Dec21.indd 1

Not only did I learn the value and benefits of gravity, I learned the importance of professional integrity, and of doing something correctly even when nobody is looking. The consequences of my error probably would not have become evident until after we had moved on and any warranty expired. Moving on without making it right however, was never an option for any son of James McLaren Goldie.

My dad was a licensed plumber, steamfitter and gas fitter who spent his life working in the trades. He started working at the age of 15 in Scotland.

He become very good at what he did, and over the years I have met a great many people who would attest to this, ex-apprentices, customers and fellow tradesmen; each and every one remembering him fondly and with genuine admiration and respect.

It was never my plan to follow in his footsteps, nor was it his plan, he never pressured me one way or another.

Ultimately, I served my apprenticeship under him and we ended up working together for over 20 years. It was not always easy. We did not always see things the same way, and we had a few legendary disagreements, yet I will always be grateful for the years I worked for and with my father.

Here’s to you Jimmy, till we meet again. <> After 21 years in the field, Steve Goldie joined the wholesale side of the business in 2002. He is frequently called on to troubleshoot systems and advise contractors. He can be reached at sgoldie@nextsupply.ca.

HPACMAG.COM

2021-12-01 1:33 PM

REFRIGERATION >

THE BEAUTY OF LESSONS LEARNED Taking a few trips down memory lane to share some learned experiences. BY DAVE DEMMA

T

he “Lessons Learned” definition used by NASA is as follows: “A lesson learned is knowledge or understanding gained by experience.

The experience may be positive, as in a successful test or mission, or negative, as in a mishap or failure ... A lesson must be significant in that it has a real or assumed impact on operations; valid in that it is factually and technically correct; and applicable in that it identifies a specific design, process, or decision that reduces or eliminates the potential for failures and mishaps, or reinforces a positive result.”

As the definition above implies, a “lesson learned”—knowledge—can be gained through a positive or negative experience.

PHOTO CREDIT: ITTHIPHON/ADOBE STOCK

LESSON 1 I was on the gymnastics team in high school. Our coach, Tom Lorenat, was a hard-nosed no frills kind of guy. He demanded each team member to give his best effort, and he had no tolerance for slackers, especially those with the talent to be successful.

The lesson learned? The obvious answer is discipline. But the additional lesson learned was this: He stressed to each person competing in the coming week’s meet to diligently prepare their routine as close to perfection as possible, and NEVER attempt to perform a move that was beyond one’s capability.

He felt that it was far better to have a routine made up of moves of medium difficulty and performed flawlessly, rather than attempting moves of the highest level of difficulty and messing HPACMAG.COM

them up miserably.

This lesson has served me well throughout my career. While I’ve never been hamstrung by the idea that “I can’t do it,” I have also never been afraid to enlist assistance when I needed it.

I recall taking a service call at supermarket where one compressor on a multi-compressor rack had failed, and an inspection revealed broken pistons, connecting rods, valves, etc. This was a very serious failure, but it was not a compressor issue. The failure was the result of a system issue.

I had no problem replacing the failed compressor. But I was not able to locate any discernable system issue which might have caused the failure.

So I enlisted the assistance of a wellseasoned journeyman, and we met at the store the following day.

After several hours of monitoring and inspecting several of the evaporator systems that were connected to the compressor rack, he saw something

that raised his curiosity. The fresh meat display cases had what appeared to be a relatively new liquid and suction line exiting the far-right display case and disappearing into the ceiling.

What his trained eye revealed was that the suction line riser did not have a p-trap at the base. During periods of low load, the absence of a trap would hinder the oil traveling with the refrigerant from returning through the suction riser to the upstairs equipment room.

Eventually, the accumulation of oil in the meat case lineup would partially restrict the normal flow of oil though the evaporators, resulting in extra pressure loss, sufficient pressure loss to force the large bulk of oil to return to the compressor rack. It was this oil sludge that was responsible for destroying the compressor.

In addition to adhering to my rule to seek assistance when necessary, there was another lesson learned in Continued on p46 DECEMBER 2021 | HPAC

45

< REFRIGERATION Continued from p45

PHOTO CREDIT: SUDARSHAN/ADOBE STOCK

this experience—compressors don’t fail for no reason. Now, there might be an occasional compressor that fails due to age/wear or defective parts/assembly but these are few and far between. When a compressor has failed there is typically a system-related reason for it. And if that reason hasn’t been determined, it’s very likely the replacement will fail also.

Lesson learned: Don’t ever be afraid to ask for assistance. And more often than not, a fresh set of eyes may see something you’ve missed.

LESSON 2 After working as a technician for the better part of a decade, I decided to make a career change and was hired as a sales engineer for a manufacturer of refrigerant flow controls. It was a wonderful company with an amazing group of co-workers, and it provided me with an opportunity to expand my level of system and component knowledge. Mind you, as a technician I felt like I already knew everything about everything, but I soon came to realize there was much I didn’t know.

It was during this time that it occurred to me there were similarities between doctors and service technicians.

The process of determining the cause of system failure (whether a refrigeration system or a person) requires complete knowledge of the system and the various component’s operation.

How can a doctor diagnose a heart problem if they don’t fully understand the operation of a heart? Likewise, how can a technician properly diagnose an expansion valve problem without understanding the function and operation of an expansion valve?

A well-respected contractor received a service call for a chiller. The technician determined the existing expansion valve had failed. He purchased a replacement and installed it. The replacement didn’t work, so he purchased 46

HPAC | DECEMBER 2021

another. Rather than replacing the valve, he removed the internal parts from the new valve and installed them in the valve he had previously installed.

This didn’t solve his problem. So, he purchased another new valve, again replacing the internal parts. The result was the same.

He then called me. I arrived and asked what symptom he was experiencing which led him to condemn the expansion valve. He said that each time the system was restarted after replacing the valve or parts, the valve acted as if it was completely closed.

This is where understanding how an expansion valve works is invaluable.

There is an opening force in the expansion valve, and this comes from the pressure developed by the fluid charge in the thermostatic element’s sensing bulb. If that fluid has somehow leaked out there would be no pressure to open the valve. So, a simple test to verify if the fluid charge was still intact was made, eliminating that as the issue.

Next, if the valve were restricted with some type of contaminant this could result in the symptom he was experiencing. A quick visual inspection revealed the valve was clean.

Next, it is possible the valve was actually defective, and the internal parts

were somehow distorted and not able to allow the valve to open. This too was checked with a visual and operational inspection and was verified to not be the cause.

Next, the internal equalizer connection allows the pressure at the evaporator outlet to be transmitted to the bottom side of the diaphragm in the thermostatic element. If for some reason this were blocked off the slight bit of leakage around the valve’s pushrods would allow high pressure to build up under the diaphragm and force the valve to close. This isn’t very common, but nevertheless a potential cause.

When the technician replaced the defective valve with the new valve, he inadvertently filled the equalizer line with sil-phos during the brazing process. This blocked off the equalizer line and resulted in the condition described in the previous paragraph.

The portion of the equalizer line that was plugged was removed, and then the equalizer line was re-brazed into the outlet of the chiller barrel. The system was evacuated then started up and operated without incident.

Lesson learned: Knowledge of system operation and component operation is absolutely essential to becoming a great technician. If this technician HPACMAG.COM

had a proper understanding of how expansion valves functioned, he could have easily solved this problem.

LESSON 3 Another well-respected contractor called me to visit a large building with a DX system for conditioning the building. As I recall, there were four air handlers each with two expansion valves, so a total of eight expansion valves.

The complaint: every expansion valve is “defective”.

I arrived and again asked the technician to review what he believed the problem to be, and what steps he’d

superheat and a low suction pressure.

This feel and sound only occurs when the expansion valve is being fed with a mixture of liquid and vapour.

I asked if the system had experienced any leaks, and if the system was properly charged. His responses were “no, and yes.”

To verify I took a look at the sight glass. The inside of the glass was dirty, which can happen in systems with contamination issues. I asked to borrow a flashlight for a better view. Sure enough, the system was short of refrigerant, as revealed by the liquid/vapour mixture flowing through the sight glass.

“As a technician I felt like I already knew everything about everything, but I soon came to realize there was much I didn’t know.” taken. He stated that all of the valves were underfeeding, which resulted in a loss of system capacity. In addition, the system suction pressure was substantially lower than the typical 68.5 psi (40F SST) you’d expect on an R-22 air conditioning system.

He’d measured the superheat for each valve, and found them all to be operating between 20F and 25F superheat, which explained the reduced system capacity and the low suction pressure. He then attempted to adjust each valve, but to no avail.

The first thing I noticed was each valve making the same very distinct sound. There seemed to be a lot of agitation inside resulting in a rumbling sound. In addition, while holding the liquid line at the inlet of the expansion valve you could feel the agitation.

Expansion valves only operate at their rated capacity when they are fed with 100% liquid refrigerant. When being fed with a mixture of liquid and vapour they operate at a reduced capacity, which would result in a high HPACMAG.COM

I gently told him the problem and that a thorough leak check was in order and the addition of refrigerant.

Lesson learned: The odds of every single expansion valve being defective are slim and none. Now, it is possible that a severe system contamination problem could cause all of the valves to be plugged up and not operating properly, but that wouldn’t really be an expansion valve problem, it would be a contamination problem likely brought on by elevated discharge temperatures which resulted in oil decomposition.

Anytime the complaint is “all of the (fill in the blank) are defective,” there’s some other problem that hasn’t yet been identified.

LESSON 4 A technician shared an experience that could have resulted in disaster, even injury (or death). He was working on a compressor and needed to remove one of the heads. He closed the suction and discharge valves then bled the compressor pressure from the low side

valve before removing the head bolts.

After removing all of the head bolts it’s not uncommon that the elevated discharge temperatures result in the oil saturated gasket to have adhered to the head and the valve plate, keeping the head in place. A hammer and gasket scraper is used to break the seal to allow removal of the head.

Unbeknownst to the technician, the compressor’s discharge valve seat was broken. Even though the valve was front seated it did not isolate the compressor from the high pressure in the discharge line.

The technician proceeded with hammer and gasket scraper, and when the gasket seal was sufficiently broken the head blew off the compressor.

He was caught completely by surprise. Fortunately, the projectile missed his head, but the now open compressor with a leaking discharge valve quickly filled the machine room with high pressure vapour, making it difficult to breath. He barely made it out of the machine room before passing out.

Lesson learned: Whenever removing a compressor head, oil pump, valve, side cover, etc., keep two bolts in place (slightly loosened) while breaking the gasket seal. If there is residual pressure inside the compressor, or a leaking valve, the bolts will eliminate the possibility of a high-pressure projectile causing damage or injury.

Every technician should be interested in reducing/eliminating the potential for failures and mishaps. Seek opportunities for lessons learned, and keep them permanently deposited into your knowledge bank. <> Dave Demma holds a degree in refrigeration engineering and worked as a journeyman refrigeration technician before moving into the manufacturing sector where he regularly trains contractor and engineering groups. He can be reached at ddemma@uri.com.

DECEMBER 2021 | HPAC

47

TEST&MEASUREMENTPRODUCTS The battery powered DPG Series digital pressure gauge from Winters is suited for commercial and industrial applications.

The 2.5-in. case is made with ABS and a silicone rubber boot, and the digital gauge offers features such as: reset to zero function, options for a backlight and a continuous peak pressure indication. It comes with a ±1% accuracy standard and a ±0.5% option for gauges up to 10,000 psi. Operating temperature is -10C to 50C (14F to 122F). winters.com NAVAC now offers a smart refrigerant charger that also features an exacting digital manifold TSI’s AirAssure 8144-2 is a two-gas model de-

gauge and precision wireless electronic scale.

signed to help understand and manage com-

Weighing less than 40lbs, the NRC62D Smart

mon indoor air pollutants while utilizing low-

Refrigerant Charger is designed to perform the

cost sensor technology to continuously monitor

tasks of several tools in one unit. The unit of-

carbon dioxide (CO2), total volatile organic

fers automatic operation for intuitive, consis-

compounds (tVOC), particulate matter (PM),

tent system evacuation and refrigerant filling.

and other indoor air conditions. The model

The digital manifold gauge features pressure

8144-2 also connects to TSI Link Solutions

and temperature displays as well as calculated

cloud-based monitoring platform which allows

super-heat and sub-cooling data. The wireless

users to view, analyze and share actionable

electronic scale can also be used as a stand-

data in real time.tsi.com

alone device.navacglobal.com

The new Wireless Vacuum Gauge (MG44) from Fieldpiece is engineered to give users ease of use and a reliable reading. The gauge offers

Kane has introduced its new 599 ECM tester offer-

a leak-proof seal, and the MG44 can

ing full HVAC/R functionality to be prepared for any

be used with the company’s Job Link

call. Designed for EC motor measurement, it pro-

System app from long distances.

vides three-phase rotation testing and unbalanced

The easy-to-read backlit LCD offers

motor testing. Its Low Z filter eliminates ghost volt-

graphical representation of the vac-

ages; it has built-in differential temperature; and it

uum progress even in low light or at

can provide real time data remotely using Kane’s

odd angles.fieldpiece.com

app.kanetest.ca

The EXTECH 250W Series of handheld Bluetooth-connected meters from Teledyne Flir are made for building diagnostics, especially for HVAC/R contractors. Each 250W series device is compatible with the ExView App to capture data, display trends, set alarms, and to create and send reports via mobile client devices. The app can connect with up to eight meters at once, providing users with deeper insights on equipment and building health. flir.ca

48

HPAC | DECEMBER 2021

HPACMAG.COM

SHOW REVIEW >

CIPHEX WEST 2021 The plumbing and heating industry gathered together in Vancouver for the industry’s first trade show event since the pandemic. BY DOUG PICKLYK

CIPHEX West show floor, exhibitors getting ready to receive the visitors on the first day of the two-day event, November 2nd and 3rd, 2021.

F

or two days in Vancouver the industry gathered again in person to see and learn about the latest in plumbing and heating technologies, network with colleagues and share some laughs. The return of CIPHEX West on November 3 and 4 saw more than 150 exhibitors spread over 30,000 sq. ft. primarily located on the arena floor at the Coliseum located at the Pacific National Exhibition grounds.

According to the Canadian Institute of Plumbing and Heating (CIPH), the show organizers, 51% of the attendees at the show were contractors and renovators, while some 20% were wholesalers. CIPH president Ralph Suppa commented, after visiting every booth, that everyone was very encouraged by the level of activity and positive energy being generated on the show floor.

Among all of the action, heat pump technology was a topic of great interest for a number of the contractors visiting this year’s event, especially in light of the new Vancouver Building By-law (VBBL) 2022 which mandates zero emissions for space heating and domestic hot water (DHW) beginning January 1, 2022 for new home builds in the city of Vancouver.

There were eight educational sessions during the show, with four dedicated to hydronics and heat pumps. One of the more well-attended programs was a panel session titled The Changing Landscape of Hydronics in Canada, moderated by Jerry Leyte of Viessmann Canada, panelists included: Mark HPACMAG.COM

Evans of Viega, Mike Miller of TACO, Dave Hughes of the Canadian Hydronics Council (CIPH), Gary Milligan of the Thermal Environmental Comfort Association (TECA) and Phil White from the City of Vancouver.

To open the discussion, the manufacturers addressed how they are reacting to supply chain issues and the challenges experienced since the pandemic began. Ultimatly they reflected on the reality that supplies are more challenging to source, and increasing demand is driving up costs for manufacturers. And there doesn’t seem to be a quick resolution in sight.

The conversation moved towards how digital technologies are changing the hydronics industry. “There is a knowledge transfer happening,” said Evans. “The products are becoming smarter, and that changes the need for training and the type of training that people get.”

“Fifty years ago, if you sold a boiler it came in sections and it was assembled on-site by the trades person. The concept of the packaged boiler changed things, and now with the Internet of Things it’s making that product smarter and it’s changing a lot of what a trades person needs to know.”

Hughes agreed, noting how there are now boilers with builtin O2 sensors that don’t require a combustion analyzer to set them up, and integrated WiFi is allowing for remote access for diagnostics and troubleshooting. But he insists that trainContinued on p51 DECEMBER 2021 | HPAC

49

December 2021

FREE to qualified subscribers!

Simply fax this form today or visit www.hpacmag.com and click subscribe!

STAY CONNECTED…

Please fill in the following and fax today to 416-442-2230 or visit our website and click on subscribe www.hpacmag.com

YES!

I wish to receive/continue to receive HPAC Magazine absolutely FREE! No

Name Title Company Address City

Province

Business Phone # (

)

Business Fax # (

Postal Code

)

Your FREE subscription also includes our FREE e-newsletter, please provide your e-mail address below: E-mail: Signature

Date

/

(Must be signed and dated to be valid)

D

/ M

Y

1. Company Business Activity? (Check ONE only)

o o o o o o

Mechanical Contractor Fuel Oil Dealer/ Contractor Consulting Engineers/Specifying Writer Government Utilities

o o o o o

Refrigeration Service Engineer/Contractor Wholesaler/Distributor/Agent Plumbing Inspector Hospitals and Related Institutions General Building Construction

Others Allied to the Field (please specify) –––––––––––––––––––––––––––––––––––––––––––

–––

2. Do you specify, purchase and/or approve the purchase of mechanical products or services?

o

Yes

o

No

3. Company Job Sector? (Check ALL that apply)

o

Commercial

o

Residential

o

Industrial

o

Institutional

4. Number of employees at this location?

o o o

1-4 5-9 10 - 19

o o o

o o o

20 - 49 50 - 99 100 - 199

o o

200 - 499 500 - 999

2500 + Unknown

1000 - 2499

5. Company Job Activities? (Check ALL that apply)

o o o

Plumbing (i.e DHW, Piping etc.)

Refrigeration Electric Heating

o o o

Ventilation Forced Air Heating Air Conditioning

o o o

HPAC Magazine

111 Gordon Baker Rd. Suite 400, North York, ON M2H 3R1

Publisher reserves the right to determine qualification & limit distribution.

Hydronic Heating Fire Protection Other–––––––––––––––––– (please specify)

FAX: 416-442-2230

SHOW REVIEW >

The interest level was high for attendees engaging with exhibitors at the plumbing and heating industry’s first in-person trade show since the pandemic hit.

Mike Miller of TACO Comfort Solutions and regular HPAC contributor, presented a session on Meeting the Needs of the Future: Air to Water Heat Pumps.

ing still has to cover the basics for new people coming into the industry.

“It’s great that we have this smart equipment, but technicians still have to know what that system is supposed to do and how it’s supposed to operate,” says Hughes.

Milligan noted that TECA has adjusted its training to online and they’ve been as busy as ever. “It has been a lot of work, but it’s been a win-win and a great learning experience for everybody.”

what that natural gas boilers were doing before.

Electric baseboard heating is permitted, as well as electric boilers for infloor heating or radiators, but those systems also come with the additional running cost. “We’re really trying to push the heat pump route,” says White.

“That’s why we’ve developed training in collaboration with TECA, and we’ve brought out a Municipal Heat Pump Certification to provide upskilling to the installer base that’s already out there.”

The new TECA program is a 21-hour course that was officially launched at CIPHEX. The new program coincides with a change coming July 1, pending city council approval, that a mechanical permit will be required and the city will be inspecting heating systems going into new builds.

So if the permitting is approved, then completion of the Municipal Heat Pump Certification exam will become mandatory for the installation of heat pumps in the city of Vancouver after July 1.

Hughes noted that it all goes back to education, and that there are people installing hydronic systems across

VANCOUVER BY-LAW The talk then shifted to the City of Vancouver’s new building by-law. Phil White noted there are some allowances, so if a house is built to the Passive House standard, then natural gas boilers or natural gas for DHW can be used. But every other new build, three stories or less, has to be zero emissions for space heating and DHW, as of January 1.

In Vancouver radiant heating with hydronics accounts for over 90% of new builds, so according to White, it’s actually a perfect marriage for zero emissions to bring in heat pumps now to do HPACMAG.COM

Phil White from the City of Vancouver (front), along with Dave Hughes of CHC (back left) and Gary Milligan of TECA (back right), along with Mark Evans (Viega), Mike Miller (TACO) and Jerry Leyte (Viessmann) participated in a panel called: The Changing Landscape of Hydronics in Canada.

Canada who haven’t been properly trained. “That’s part of the reason the city of Vancouver is introducing their heating permit, so that they can bring some law and order to the wild west,” said Hughes.

Milligan agreed, noting that in some municipalities there is regulation without verification. “So if there is no threat of inspecting and demanding changes, we end up with situations where people end up trying to get away with anything they can to save a dollar.”

When asked where the city is seeing the most resistance to the new by-law, White acknowledged that home builders were generally not happy with the change, but they’ve found that citizens want to reduce their greenhouse gas emissions, so there is a lot of voluntary uptake. “This is the way the world is going,” he said. <> CIPHEX West 2023 is scheduled to return to Calgary on October 18 and 19, 2023, taking place at the BMO Centre at Stampede Park.

DECEMBER 2021 | HPAC

51

Join us CIPH GALA IN SUPPORT OF

HABITAT FOR HUMANITY CANADA

We hope that you will join the more than 300 industry colleagues who will be there to celebrate CIPH’s Partnership with Habitat for Humanity Canada!

Featuring:

Steve Patterson,

Host of CBC’s The Debaters and Award-Winning Comedian & Humour Writer

March 22, 2022 6:00pm InterContinental Toronto Centre 225 FRONT STREET WEST, TORONTO, ON M5V 2X3

$360 + HST Table of 8: $2760 + HST Individual Tickets:

www.ciph.com/gala2022

TRAINING

EDUCATIONAL OPPORTUNITIES ACROSS CANADA TECA Municipal Heat Pump Certification (Hydronics/B.C.)

with NRCan, is awarded to those who hold current certification for the following four HRAI training programs: Residential Ventilation using Section 9.32 of the Building Code (as of September 1, 2019), Residential Heat Loss & Heat Gain Calculations, Residential Radiant Hydronics Design and Residential Commissioning. The new HRAI Residential Ventilation Design Technician (RVDT) Designation will be awarded to those who hold current certification for the following four HRAI training programs: Residential Ventilation using Section 9.32 of the Building Code, Residential Ventilation using CSA F326, HRV/ERV Installation & Balancing Fundamentals and Depressurization Testing of Residential Systems.

The Thermal Environmental Comfort Association (TECA) has added the new Municipal Heat Pump Certification (hydronic) course to its line-up.

This course is a must have to utilize the new TECA heat pump drawings and design projects involving air-to-water or water-to-water heat pumps.

As of January 1, 2022, new residential buildings under four stories will no longer be permitted to use natural gas for their heating and hot water systems, and pending approval, as of July 1, 2022 in order to install a heat pump in Vancouver you must have a Municipal Heat Pump Certification and be registered as a certified heat pump installer. Delivered online, the couse is not a self-paced offering–it is online synchronous delivery, and students will be expected to be available and online on the posted days and times. The program offers insight into the proper sizing, operation and logic of heat pumps when utilized in a hydronic heating or cooling system. Highlights include: principals of refrigeration, balance point calculations, chilled water piping, control strategies, pump and flow requirements, back-up systems and heat pump equipment selection, variable capacities. teca.ca

hrai.ca/rasdt-rhdt-rvdt-designations

Hydronics Fundamentals

TECA Quality First Training (B.C.)

The Canadian Hydronic Council (CHC) Webinar Series: Modules 1-5 (2021) is a five-part comprehensive introduction to all aspects of hydronics with session titles including: Boilers, Heat Sources and Reduction of GHG Emissions; Components and Outdoor Reset; Sizing Components; Piping Arrangements; and Heat Loss Calculations and Control Systems.

The session provides a valuable overview in five hour-long sessions. The cost is $369 for CIPH members, and $599 for non-members.

www.ciph.com/store/

Design Technician Designations

The HRAI Residential Air System Design Technician (RASDT) Designation was established in partnership with Natural Resources Canada (NRCan).

The designation is awarded to all individuals who hold current certification for the following four HRAI training programs: Residential Ventilation using Section 9.32 of the Building Code (as of September 1, 2019), Residential Heat Loss & Heat Gain Calculations, Residential Air System Design and Residential Commissioning. The HRAI Residential Hydronics Design Technician (RHDT) Designation, also established in partnership

ODP/ODS Training

This environmental awareness training program, based on Environment Canada's "Code of Practice for Elimination of Fluorocarbon Emissions in Refrigeration and Air Conditioning Systems", deals with environmentallycorrect equipment design, proper handling of refrigerants, and will prepare participants for complying with Federal and Provincial Regulations covering refrigeration and air conditioning systems. hrai.ca/odp-ods The Thermal Environmental Comfort Association (TECA) Quality First training programs are developed by the industry, setting minimum standards for the residential and light commercial heating, ventilating and cooling trade in British Columbia. Courses provide contractors the information they need to install equipment that operates safely and comfortably at rated efficiencies. TECA is now offering on-line training while still maintaining the integrity of its certification. teca.ca

Basic Principles of Residential Ventilation (online)

HRAI offers this introductory self-directed online course presented through an interactive, electronic textbook that allows students to move through the modules at their own pace. Participants are introduced to the basic principles of residential ventilation including the flow of air, heat and water and how these impact natural ventilation (aka air leakage). The theory of mechanical airflow including air pressure, duct resistance and fan ratings are also discussed. Upon completion students understand the building science principles for ventilation design and commissioning.

hrai.ca

THE SOURCE ADVERTISERS IN THIS ISSUE

Adrian Steel.....................adriansteel.com................................. p.9

Kane.................................kanetest.ca....................................... p.17

Arctic Heat Pumps.........arcticheatpumps.com......................p.23

Liberty Pumps.................LibertyPumps.com/StormCell........... p.2

Bradford White................bradfordwhite.com/infinitiseries....p.43

Morden National.............baxiboilers.com................................p.33

CMPX...............................cmpxshow.com................................... p.7

Olimpia Splendid.............olimpiasplendidusa.com.................p.15

Franklin Electric.............littlegiant.com.................................. p.41 Habitat for Humanity.....ciph.com/gala2022.........................p.52 Helly Hansen...................hhworkwear.com................................ p.5 Inner Cool........................inner-coolsystems.ca.......................p.30 Intertek Testing Services.............Intertek.com/HVACR........................p.35

Resideo............................resideo.com/pro/water...................p.31 Taco..................................tacocomfortsolutions.com..............p.56 Thermostat Recovery Program..........hrai.ca/trp........................................p.36 TSI.....................................tsi.com/Q-Trak-HPAC........................p.39

IPEX..................................ipexaquarise.com.............................p.55

Uline.................................uline.ca............................................. p.11

JB Sales...........................jbsales.ca..........................................p.44

Viessmann.......................viessmann.ca...................................p.21

HPACMAG.COM

DECEMBER 2021 | HPAC

53

CALENDAR

FOR THE LATEST EVENT NEWS, SEE HPAC'S NEWSLETTER @ HPACMAG.COM

2022

Due to the COVID-19 pandemic visit event websites for the most current updates.

MEP Innovation Conference January 24-26

AHR Expo January 31-February 2

KBIS 2022 February 8-10

Sponsored by the Mechanical Contractors Association of America (MCAA), National Electrical Contractors Association (NECA) and the Sheet Metal and Air Conditioning Contractors National Association (SMACNA), the MEP Innovation Conference in Tampa, Florida will provide topical education specific to contractors from those fields. mcaaevents.org/itc/

The Air Conditioning, Heating, Refrigeration (AHR) Expo returns in 2022 to the Convention Center in Las Vegas. The annual showcase will reveal the future of HVAC/R technology along with plenty of educational and networking opportunities.

The 2022 Kitchen & Bath Industry Show (KBIS) will be held in Orlando, Florida, where attendees will see the latest product innovations from the leading kitchen and bath brands.

BUILDEX Vancouver February 16-17

CMPX 2022 March 23-25

Following in person micro events and online educational programming in the fall of 2021, BUILDEX Vancouver returns with a face-to-face expo at the Vancouver Convention Centre.

Held at the Metro Toronto Convention Centre, CMPX is Canada’s largest trade show for the mechanical and plumbing industries attracting some 500 exhibitors representing products, services, innovations and applications for industry professionals.

buildexvancouver.com

MEET Show May 4-5 The Mechanical Electrical Electronic Technology Show serves as a venue to bring together professionals from the mechanical and electrical industries from across North America. MEET features hundreds of companies in over 100,000+ sq. ft. of exhibit space in the Moncton Coliseum Complex.

NCI High Performance HVAC Summit April 4-7 The National Comfort Institute (NCI) summit is being held in the Scottsdale, Arizona area and will feature breakout sessions designed for different knowledge levels: novice, practitioner or master.

cmpxshow.com

gotosummit.com

National Apprenticeship Conference May 29-31

CIPH Annual Business Conference June 19-21

The Canadian Apprenticeship Forum (CAF-FAC) will host the 2022 National Apprenticeship Conference at the Halifax Convention Centre.

This year’s event highlights will include initiatives and strategies reflecting three themes: recovery, resilience and readiness.

meetshow.ca

caf-fca.org

Ventilation 2022: International Industrial Ventilation Conference for Contaminant Control June 22-24

ASHRAE Annual Conference June 25-29

The 13th edition of this international conference is taking place in Toronto, colocated at the Sheraton Toronto with the ASHRAE Annual Conference. The event will focus on industrial process ventilation system design and applications, innovations and advances. ashrae.org/conferences

kbis.com

ahrexpo.com

This year’s Annual Conference is being hosted in Toronto at the Sheraton Toronto. The technical program is comprised of eight tracks including: connected buildings; cold climate building system design; IAQ, energy use, comfort and health of sustainable buildings; and buildings in the aftermath of COVID-19.

CIPH’s Annual Business Conference will be held at the Fairmont Jasper Park Lodge.

Members are invited to expand their knowledge with informative business sessions and speakers.

ciph.com

Canadian Hydronics Conference 2022 September 27-28 The National CHC conference will bring hydronics industry professionals together in Saskatoon to connect in person and share knowledge and business building ideas.

ciph.com

ashrae.org/conferences

Planning an event?

Send the details to dpicklyk@hpacmag.com 54

HPAC | DECEMBER 2021

HPACMAG.COM

SCAN THE CODE

YOUR CHOICE OF

AN ULTIMATE

& COMPLETE THE QUIZ

WIN!

FOR YOUR CHANCE TO

*

HOCKEY, GOLF OR FISHING

GETAWAY!

GRAND PRIZE INCLUDES:

FOR ADDITIONAL CHANCES TO WIN:

• Pick a destination of either East or West Coast • Airfare for two • 3 nights’ accommodation • 3 meals included • $500 CAD VISA gift card • Premium sports experience

• Complete the AquaRise® Quiz at (URL here) for your first chance to WIN • The more stories you share online, the more times you’re entered to WIN • Chance of Ten secondary prizes of $100 CAD gift cards also to be won • Share on social media often from NOVEMBER 8, 2021 TO JANUARY 31, 2022

*Maximum value $5,000 CAD

* Contest open to contractors and engineers in the construction industry

Share your AquaRise® story in a video, pictures or in writing on your Instagram, Facebook or Twitter using the hashtag #IPEXWIN

To enter, scan the QR code or visit WinWithAquarise.com today!

Some restrictions may apply. See WinWithAquaRise.com for complete Rules and Regulations.

AquaRise® Nonmetallic Potable Water Piping Systems for Commercial & High Building Construction 1-866-473-9462 | ipexaquarise.com AquaRise® and the colour of the AquaRise® pipes and fittings are registered trademarks. Distributed in Canada by IPEX Inc., Mississauga, Ontario.