)1.604.926.2466 * info@tofinosoftware.com : www.tofinosoftware.com MANAGE JOBS, MRO INVENTORY, AND SPOT-BUYS ALL IN ONE SYSTEM Contact us It’s so easy BE PRODUCTIVE AFTER 1 HOUR OF TRAINING Drive efficiency and uptime Work anywhere: access Tofino with or without internet Use any device: PC, laptop, mobile, handheld computer MROMAGAZINE.COM / SEPTEMBER 2022 VOLUME 38 / ISSUE 4 FOCUS ON: Working safely with heavy equipment ALSO: Importance of qualityair REPAIRSMECHANICAL The importance of routine checks.
An exponentially more reliable Type E bearing SKF’s world class bearing technology combined with superior sealing technology from CR Seals means long lasting protection against contamination and lost production. • Ideal for heavy industries like aggregate, metals, pulp and paper • Excellent resistance to wear and high temperatures for long service life • Multiple sealing lips exclude the harshest contamination • Designed for relubrication • Fully interchangeable • Proven to withstand 600+ hours in mud slurry testing with zero contamination ingress SKF’s Mounted tapered roller bearings are backed by over a century of SKF expertise PLUS an SKF Performance Warranty. Introducing the SKF Mounted tapered roller bearing performedSKF the10xovercompetitioninsealtesting Find out skf.li/0pkng3more:
WORKING WITH HEAVY and are at the heart of any in their and safety will always provide
operation, investing
SAFELY
good businesses
A CERTIFICATION PROGRAM THAT WILL CHANGE MAINTENANCE The new alignment certification will document exactly what an alignment specialist is certified to perform in the way of alignment tasks according to the latest internationally accepted standards.
IMPORTANCE OF AIR QUALITY MRO sat down with Kevin Lisso at EnerSavings to speak about air quality.
healthy workers
a strong return.
IMPORTANCE OF ROUTINE CHECKS FOR MECHANICAL REPAIRS Mechanical components in a factory require the most attention from a maintenance perspective, as they have a high propensity to fail, making it a high priority for maintenance teams.
COMPLIANCE OR INTENT Being ISO 9000 certified should be an indicator of doing and standardizing performance; however, for the longest time it wasn’t.
@MROmagazine September 2022 / MRO 3 Columns 5 EDITORIAL maintenanceCanada’s voice. 12 WHAT’S UP DOUG Greasing of conveyor pulley bearings. 14 MAINTENANCE 101 The role of manager.maintenancethe 16 MRO QUIZ Gas troubleshooting.operationalturbine In every issue 6 NEWSWATCH 10 EVENTS 28 NEW PRODUCTS 30 IN WITHCONVERSATIONMRO 12 2016 14 INSIDE
–
EQUIPMENT Safe
well-being
2018222426 FEATURES SEPTEMBER 2022
Back in 2018, a simpler time be fore the world was introduced to the COVID-19 pandemic, I took over as editor of Machinery and Equipment MRO magazine. At the time I was new to the industry and had to acclimatize myself rather quickly. Luckily, the for mer editor of MRO was still a part of Annex Business Media and was very helpful in getting me up to speed.
MAINTENANCE NOTEBOOK Looking to the future MARIO CYWINSKI mcywinskiw@mro.caEditor ESTABLISHED 1985 SEPTEMBER 2022 Volume 38, Number 4 READER SERVICE Print and digital subscription inquiries or changes, please contact Customer Service Angelita Potal, Customer Service Administrator Tel: Toronto,Mail:email:416-510-5113apotal@annexbusinessmedia.com111GordonBakerRd.,Suite400ONM2H3R1 EDITOR Mario Cywinski mcywinski@annexbusinessmedia.com226-931-4194 SENIOR PUBLISHER Paul Burton pburton@annexbusinessmedia.com416-510-6756 ASSOCIATE EDITOR Monica Ferguson mferguson@annexbusinessmedia.com416-510-5206 NATIONAL ACCOUNT MANAGER Ilana Fawcett ifawcett@annexbusinessmedia.com416-829-1221 BRAND SALES MANAGER Chander Verma CVerma@annexbusinessmedia.com437-218-0941 AUDIENCE DEVELOPMENT MANAGER Beata 416-510-5182bolechnowicz@annexbusinessmedia.comOlechnowicz MEDIA DESIGNER Brooke Shaw ACCOUNT CO-ORDINATOR Catherine Giles cgiles@annexbusinessmedia.com416-510-5232 COO Scott Machinerysjamieson@annexbusinessmedia.comJamiesonandEquipmentMROispublished by Annex Business Media, 111 Gordon Baker Rd., Suite 400, Toronto ON M2H 3R1; Tel. 416-442-5600, Fax 416-510-5140. Toll-free: in1-800-268-7742Canada,1-800-387-0273 in the USA. Printed in Canada ISSN 0831-8603 (print); ISSN 1923-3698 (digital) PUBLICATION MAIL AGREEMENT #40065710 Subscription rates. Canada: 1 year $65, 2 years $110. United States: 1 year $110. Elsewhere: 1 year $126. Single copies $10 (Canada), $16.50 (U.S.), $21.50 (other). Add applicable taxes to all rates. On occasion, our subscription list is made available to organizations whose products or services may be of interest to our readers. If you would prefer not to receive such information, please contact our circulation department in any of the four ways listed above. Annex Privacy isthoseexpressedBusinesspublisher’spublicationNoPrivacy@annexbusinessmedia.comOfficer1-800-668-2374partoftheeditorialcontentofthismaybereprintedwithoutthewrittenpermission©2022AnnexMedia.Allrightsreserved.Opinionsinthismagazinearenotnecessarilyoftheeditororthepublisher.Noliabilityassumedforerrorsoromissions. Connect with MRO magazine @mro_maintenance @MROMagazine /company/mro-magazine @mromagazine info@mro.ca mromagazine.com
4 MRO / September 2022
The September 2022 issue of MRO has had a complete revamp. Welcome to MRO Canada’s Maintenance Voice. For many we have always been and always will be simply MRO, and that is great.Everything from the logo, tagline, and layout, has changed in our print issues, while the web site, e-news, and social media channels will be updated to take on the new look. One thing that will not change, is the content that is provided within the pages of MRO. Long running col umns, the MRO Quiz, Maintenance 101, What’s Up Doug, will all remain. Articles from our regular contributors will also continue to be featured. A noticeable change of the rebrand is our Mr. O feature. While our unofficial mascot has always had a role, it is now time to move forward with a more pro fessional look. Therefore, we introduce MRO Pro Tips, which will feature the same great tips from industry experts, but with a more professional focus. In turn, our In Conversation with Mr. O podcast will now be, In Conversation with MRO. Over the coming months we plan to offer new episodes of the podcast, covering a deep dive on a variety of topics that our listeners want to learn more about. Going forward, we do not plan on standing still, we will introduce new offerings under the MRO umbrella if they improve the information that our readers, listeners, and watchers want. One example is a renewed focus on our video content, as our YouTube channel continues to grow, we plan on offering more videos on our web site andAnotherchannel.example is being the pulse of the industry in terms of attending and reporting on events. We plan to return at a pre-pandemic level, as more trade shows, conferences, and compa ny events are scheduled or planned. Plan to see a lot more of the MRO team over the coming months. Don’t hesitate to offer us feedback on the new MRO brand, including any suggestions on what you would like us to feature within any of our offerings (print, web, podcast, and others). Enjoy the new MRO.
Although the content was everything that our readers expected, MRO had not had a design update for a while. Since then, and I’ll quote a former publisher of mine, “we have been taking small bites of the elephant, with minor changes.” We did update our logo in 2020, but everything else has remained the same. Until now!
Thank you,
Ontario Power Generation (OPG) and X-energy signed a framework agreement to pursue deploying Xe-100 small modular reactors for industrial applications in Canada. Under the agreement, deployment would occur in Ontario at industrial sites and identify further potential end users and sites throughout Can ada.The Xe-100 high-temperature gas-cooled reactor optimizes tech nology to enable decarbonization of industrial end use applications. Combining high-temperature steam and power production, the Xe-100 can support oil sands operations, mining applications, and industrial processes.
NEWSWATCH
Air Niugini, Papua New Guinea’s national airline, signed a five-year DCS agreement to support up to five Dash 8-400 aircraft. Established in April 2021, flybe Limited will operate throughout the United Kingdom and European Union. The airline’s fiveyear DCS agreement will support a fleet of up to 32 Dash 8-400 aircraft.
Innio Waukesha Gas Engines and Detechtion Technologies announced a technology collaboration that will expand asset connectivity, drive a digital ecosystem and transition to decarbonization.Thetechnology partnership will combine Innio’s Waukesha engine analytics with Detechtion’s compres sion monitoring and optimization technology into a solution for both new and existing compressor skids. The solution will remotely manage assets securely and in real-time. The system anticipates unexpected events, determines if assistance is re quired, improves energy production, and reduces plant downtime.
The parties held a signature ceremo ny during the Farnborough Airshow in Hampshire, England. Alp Aviation and Wencor have been in partnership for over 20 years. The new contract will extend this relationship through 2027.
EXECUTIVEOFFICERSANNOUNCESANDCOMMITTEE
INNIO WAUKESHA AND COLLABORATETECHNOLOGIESDETECHTION
The Electrical Apparatus Service Association (EASA) announces international officers for the 20222023 administrative year.
EASA
WENCOR AND ALP AVIATION PURCHASEEXTENDAGREEMENT
FIRST PROJECTDUPARQUETACQUISITIONMINING’SOFGOLD
6 MRO / September 2022 MROMAGAZINE.COM EASAWencor;/AviationAlpInc.;GenerationPowerGroup/OntarioCNWCanada;ofAircraftHavillandDeclockwise:Photos
PURSUE CLEAN OPPORTUNITIESENERGY
De Havilland Aircraft of Canada Limited is increasing its Component Solutions Program with agreements signed by Air Niugini Limited and flybe Limited. Under the agree ments, De Havilland Canada will manage component maintenance, repair, and overhaul services for the airlines’ Dash 8-400 aircraft. The DCS Program will provide access to De Havilland Canada’s strategically located exchange pool.
The new roles include Sid Seymour of Seymour-Smith Electric Motor and Pump Service in Burlington, Ontario, Canada as Chairman of the Board, Sean McNamara of Komatsu in Rutherford, New South Wales, Australia as Vice-Chairman, and Paul Rossiter of Energy Management in Salt Lake City, Utah as Secretary andSeymourTreasurer.has 36 years of experience in the electrical apparatus industry. He has been active in EASA’s Ontar io Chapter and was director of EASA Region Eight that includes all Cana dian provinces. He has served several on EASA international committees.
OPG AND X-ENERGY
DEMAINTENANCEHAVILLAND
Wencor and Alp Aviation signed a multi-year purchase agreement. Wencor will provide consumable and expendable parts to support Alp Aviation’s production requirements.
First Mining Gold made an offer to acquire all issued and outstanding De Havilland Canada will manage component maintenance, repair, and overhaul services for the Wencorairlinesand Alp Aviation signed a agreementpurchasemulti-year
EXPANDS COMPONENT SOLUTIONS PROGRAM
MOTION NAMES
VICE-PRESIDENTSENIOR
10 YEARS
Electromate was named the winner of the Innovation and Technol ogy Award at the 2022 Business Achievement Awards presented by the Vaughan Chamber of Commerce. Electromate been operating in Vaughan for over 20 years and is a member of the Chamber of Com merce. MOMENTIVE NAMES CFO Momentive Performance Materials appointed Bob Bush as Chief Finan cialBushOfficer.has over 33 years of broad finance experience. He began his ca reer at Momentive in 2013 and has held several finance leadership roles in FP&A, global operations, business finance, and most recently served as vice-president and treasurer.
ELECTROMATE WINS INNOVATION TECHNOLOGYANDAWARD
IN WINNIPEG Classic Fire + Life Safety celebrates 10 years of business in Winnipeg. Found ed in 2012 under the FCFP banner, the company rebranded in late 2021. Its name was changed to Classic Fire + Life Safety, a reflection of its merger with Classic Fire Protection. In 2020, the team was composed of four employees. Today, it has grown to 10 – and looking to add more. Its largest project has been a contract for a women’s hospital, delivering essen tial fire sprinkler protection systems to this mission and community-crit icalClassicfacility.Fire + Life safety has over nine branches across Canada, servic ing industries, including the areas of fire sprinkler, fire alarm and security systems.
Portugal-based ESI has developed a system with Festo for packaging corks that reduces volume by 30 per cent.ESI’s patented solution consists of an autonomous cell and palletizing system, with an articulated robot and pneumatic components from Festo. Festo’s DSNU round cylinders can work in dusty environments, and while compressing the corks as they are sucked in by the vacuum cups and placed in the carton. The 20 cylin ders are controlled by a VTUG valve terminal.
First Mining Gold made an offer to acquire Beattie Gold Mines. Bob Bush named CFO at Momentive. Western Regional Manager, Randy Skromeda and Service Manager, Chris Dudek outside the front entrance in Winnipeg.
Motion Industries named Lisa Solo mon as Senior Vice-President – Cor porateSolomonAccounts.joined the Company in 2015 as a business development manager focused on an automotive industry account, before transition ing the same year into an automotive specialist role concentrating on a dif ferent automotive account. In 2016, she expanded her role to a corporate accounts manager overseeing the entire automotive segment. In 2021, Solomon was promoted to area VP – Corporate Accounts, leading a team of 16 sales professionals in the Central Group. In her new role, she will lead all of Motion’s corporate accounts in North America and corporate accounts support group, corporate accounts development, P2MRO, onsite solutions, energy services and international sales.
FestoSafety;Life+FireClassicMomentive;Gold;MiningFirstclockwise:Photos @MROmagazine September 2022 / MRO 7 shares of Beattie Gold Mines located in Quebec.FirstMining, directly and through its wholly owned subsidiary, Clifton Star Resources already owns approx imately 25.3 per cent of the issued and outstanding shares of Beattie Gold. The total consideration of the Beattie Offer is $4.43641 cash per Beattie Gold share and 35 First Mining Shares per Beattie Gold share for a total cash consideration of $6,227,176 and the issuance of 49,127,820 First Mining common shares.
CLASSIC FIRE + LIFE SAFETY MARKS
ESI AND SHIPPINGSPACEAUTOMATIONFESTO’SSAVESINWINECORK
SensorsMetallurgicalSuspensions;Simard(CISC);ConstructionSteelofInstituteCanadianTheSafety;&IndustrialADPorts;HOPAMachine;Beaumontclockwise:Photos
CISC ENGINEERINGDIRECTORAPPOINTSOF
MISSISSAUGASENSORSMETALLURGICALOPENSOFFICE
The Canadian Institute of Steel Con struction names Greg Miazga as the Director of Engineering. Miazga has over 35 years in the construction industry, holding roles as chief engineer and vice-president of engineering for a major Alber ta structural steel fabricator and erector, and most recently as COO for an Edmonton based energy solutions company.
“We had a great relationship with the new owner, but we believed the company needed a revitalization to benefit our customers, employees and the evolving EDM industry. In addition to repurchasing Beaumont Machine, we have reassumed the dayto-day operation of the company. In addition, we have moved the opera tion into a larger location to increase production and expand our ser vice capabilities,” said co-owner, EdTheBeaumont.newplant is located just out side of Cincinnati at 2010 Glenn Parkway in Batavia, Ohio.
Metallurgical Sensors (Metsen), opened a new office in Mississauga at 1495 Bonhill Rd.
BEAUMONT FOUNDERSREACQUIREDMACHINEBY
SIMARD SUSPENSIONS NAMES REGIONAL SALES MANAGER FOR ONTARIO AND THE MARITIMES Christopher Kidd was appointed as Simard Suspensions regional sales manager for the Ontario and Maritimes markets. Kidd has 10 years in the heavy vehicle and transport industry. He joined Simard Suspensions in 2018 for the business development of the DRAMIS division. For the past three years, Kidd has acted as a parts and aftermarket sales support specialist.
CANADA’S GENDER EQUITY
Beaumont’s original owners sold the business in early 2013. Greg
ChristopherMiazgaKidd
SUMMITCANADAINDUSTRIALLUNCHEDNETWORKATAD’S&SAFETYSUPPLIER
8 MRO / September 2022 MROMAGAZINE.COM NEWSWATCH
Beaumont Machine was recently re purchased, after the owners sold the business in early 2013.
AGREEMENT BRINGS RAIL SERVICE BACK TO THOROLD MULTIMODAL HUB Bioveld Canada and HOPA Ports have signed an industrial switch agreement with Canadian rail ser vices provider, GIO Railways Corpo ration, to enable the use of existing CN Rail infrastructure at the Thorold Multimodal Hub to transload cargo. A switching agreement allows a short line operator (GIO Rail) to use the track owned by CN to pro vide first- and last-mile delivery and transload services. The Thorold Multimodal Hub is a 200+ acre multimodal industrial complex in Niagara, adjacent to the Welland Canal. It features marine, rail and highway access, and over 500,000 square feet of indoor ware house and outdoor storage space.
The 2022 AD Industrial & Safety Canada Supplier Summit was hosted in Vancouver with nearly 400 partici pants in attendance. The event saw the re-launch of AD Canada’s Gender Equity Network (previously known as the Women in Industry Network). The objective is to promote healthy workplaces where everyone feels included and empowered, with overall awareness, and change as it relates to gender inequities being a primary focus of theThegroup.division returned 101 per cent of rebates to members, while growing remittances by 20 per cent and in creased rebate redistribution by 24.4 per cent.
“After many years of operating vir tually, we are excited to have a dedi cated space to gather and collaborate with employees and customers,” said Shiva Bissoon, general manager and director of sales and business devel opment, Metsen. “But I think the most exciting thing about this move is what drives it — steady growth. Despite the economic disruptions of a pandemic, we require facilities to meet expanded customer service, product assembly, order fulfillment, testing, and shipping needs. This is quiteTheoutstanding.”2,000square feet location of fers space for staff, product testing, and future research and development facilities.
INDUSTRYMRO
CywinskiMariophoto:Top
10 MRO / September 2022 MROMAGAZINE.COM EVENTS
“The feedback has been overwhelmingly positive,” said John Catalano, SME senior director, FABTECH. “The show remains to be the best place for attendees to explore the latest technology advancements, connect with peers, network, and gain a competitive business edge. Exhibitors were enthusiastic about the high-quality of leads they col lected, and the sales inquiries generated during the show.”
FABTECH Canada’s 80,000 square foot show floor had over 200 exhibitors, showcasing the latest innovations cov ering 40 technology focus areas, including, cutting, lasers, press brakes, robotics, and welding machines.
FABTECH Canada’s 2022 comeback BY MONICA QBPTFERGUSONevent
Over 50 conference sessions and workshops were available covering solution-based, transformative content to address today’s challenges, improve productivity and increase profits. The lineup of keynote speakers, panel dis cussions and educational programs, were held in a special presentation area within the trade show floor.
A highlight of the show were two leadership exchange panels, one on The Digital Transformation and Canada’s Economic Strength (pitched top left) featuring Jayson Myers, CEO, NGen; Mark Kirby, industry training and outreach coordinator, University of Waterloo; Martin Cloake, CEO, Raven AI; and Ian Howcroft, CEO, Skills Ontario. While the other was Changing the Gear Ratio —Women in the Automotive Industry (pitched top right) featuring Taylor Dittrich, wire products research engineer, Lincoln Electric Company; Stephanie Hoffman, owner, Underground Metal Works; Nikki Noble, coordinator and professor of welding, Lambton College; and Leanne Jefferies, vice-president, As sured Performance Network/Certified Collision Care.
The informal group Que bec Bearing and Power Transmission (QBPT) hosted it’s 60th annual Québec Bearings Golf Tourna ment at the Royal Bromont golf club. In all 119 golfers took part in the tournament, which raised over $6,000 for the Opération Enfant Soleil charity. The gala dinner por tion saw 178 attendees, with 65 distributor attendees, 41 manufac turer attendees, 30 agent attendees, and 42 “Thereothers.have been a few years when the event could not take place, so it has been around longer than 60 years, an amazing feat, I think you will be hard pressed to find an industry that can match this,” said Lars Ruuth, SKF. “Competitors and partners in manufacturing and distribution got together to celebrate the camaraderie of the bearing and power transmis sion industry over a day on the golf course and a gala dinner.”
As part of the show, Annex Business Media, and its manufacturing brands, were on hand to answer any ques tions attendees had, when visiting Annex’s table. Annex brands on hand included: Plant magazine, MRO, Man ufacturing Automation, Canadian Manufacturing, and Design Engineering.
FABTECH Canada, which is billed as the coun try’s largest metal forming, fabricating, welding, and finishing event, returned for the first time in four years recently to the Toronto Congress Centre, in Toronto, Ontario. The three-day event had attendees connect with suppli ers, see the latest industry products and developments, and discover the newest manufacturing solutions.
raises money for charity
FLUIDINTERNATIONALPOWEREXPO MARCH 14-18, 2023 LAS VEGAS, NV, USA The International Fluid Power Exposition (IFPE) is the place where engineers meet to: “ There’s no other show in the world I think that brings the OEM machine manufacturers and the suppliers as close together as this show. It’s a good place to meet and learn about what’s going on. In the Americas, in the Western Hemisphere, this is the show for fluid power.” KEN ROSENBECKER SALES MANAGER NORTH AMERICA | WIPRO INFRASTRUCTURE ENGINEERING IFPE only happens once every three years! SAVE 20% OFF REGISTRATION Register now at IFPE.com and type AD20 in the Promo Code box Discover solutions current suppliers can offer to your unique challenges. Find new partners among suppliers pushing the envelope on what fluid power can do. CONNECT WITH TOP MANUFACTURERSCO-LOCATED WITH CONEXPO-CON/AGG (two shows, one price) Including Bosch Rexroth , Danfoss Power Solutions , Parker Hannifin , Poclain , IFM Efector , Hawe Hydraulik , Husco , and 375+ more! Join your peers from these OEMs: ∙ Caterpillar Inc ∙ Volvo EquipmentConstruction ∙ Liebherr ∙ CASE EquipmentConstruction ∙ Komatsu ∙ John Deere Construction ∙ Doosan Bobcat ∙ KOBELCO Construction Machinery USA ∙ LBX Company Spark new ideas with in-depth technical conversations with other engineers. The #1 Trade Show & Conference for Fluid Power, Power Transmission, and Motion Control heretkCreditPhoto: @MROmagazine Month 2022 / MRO 11
Therefore, when using labyrinth seals, there must be regular grease flow creating the internal pressure that pushes the contamination out of the housing and out of the seal. Rather, the grease pressure needs to be there to prevent the entrance of grease into the seal to begin with.
The dose of grease for manual re-lubrication through the W33 groove is: G (grams) = D (OD in mm) x B (width in mm) x 0.002
FEATUREWHAT DOUG?UP /AdobeSurasakPhoto:
BY DOUGLAS MARTIN
Greasing of Conveyor Pulley Bearings
Referring to a labyrinth seal, could be as simple as a ‘triple lab’ or LOR/ LER seal, which is the standard seal for most split pillow blocks. A ‘taconite’ seal is also a type of labyrinth seal, but taconite seals tend to be more complex than standard triple lab seals and may include, both radial and face labyrinths and lip contact seals. However, there is no standard on the design of a taconite seal. The most significant defining feature is taconite seals have built-in grease inlets such that the seal itself gets its own feed of grease, which prevents the entrance of and purges awayWherecontamination.shouldthe grease be put into the assembly? This depends on the housing arrangement: both ends open (BEO – having two seals) or one end closed (OEC – have a seal and end cover); and the type of housing seal (triple lab or taconite), whether it is an open or sealed bearing.
Case 1 – open bearing – triple lab seal
In greased bearing applications, grease serves two purposes, to provide lubrication and to provide a barrier preventing and carrying away contamination. It provides lubrication by forming reservoirs on the bearing cage, and in the un-swept areas adjacent to the rolling elements within the bearing itself. From these reservoirs, oil is bled into the rolling contact zone to lubricate.
The factor 0.002 is adjusted for grease from the side of the bearing and for different units of measure for the grease dose. In the case of an OEC arrangement, do not suggest add a grease nipple to the end cover, and then used as the single grease inlet to the assembly. I have a specific case in which the contamination
Grease acts as both a lubricant and a key component of seals used in split pillow block housings.
As a sealing element, the grease barrier slows or stops contamination from moving between the external seal and the bearing. Keep in mind, external labyrinth seals on their own are not perfect seals, there is no contact between the rotating shaft (or flinger) and the stationary part of the seal itself (stator). The gap is large enough to allow for angular misalignment within the bearing. The gap is also wide enough to allow thermal expansion of the shaft between the bearings. Therefore, any labyrinth seal requires that there be grease in the seal to close the gaps. When there is lots of contamination, there is lots of pressure, pushing the contamination through the labyrinth seal, and unless balanced or overridden by an equal grease pressure in the grease inside the housing, it can enter the housing cavity. Once inside the bearing cavity, the external pressure now by be relieved, but within that cavity is the shaft which is rotating and in contact with the grease packed in the housing. The rotation of the shaft shearing with the grease acts like a mixer and the contamination is transported along the shaft from the dirty seal end to the clean bearing end. This is if there is no grease pressure to counteract this transport of contamination.
In this case, grease should be supplied to the centre of the bearing housing to feed grease into the W33 groove of the bearing. The grease should then flow out from the bearing in the direction of the seals. The grease should be added frequently enough that over time, there appears to be a steady (slow) flow of clean grease from the seals. There is a situation in which there may be a fear of ‘over greasing’. Since the bearing is open, and the labyrinth seals are open, there is ample room for grease flow out of the bearing and housing. To keep the grease flowing though the bearing, one should increase the frequency of applying grease to the bearing as opposed to increasing the amount of grease at the time of applying the grease. Therefore, grease the bearing two times per month instead of once a month, but put in the same dose which should be calculated based on the bearing dimensions.
12 MRO / September 2022 MROMAGAZINE.COM
Case 2 – open bearing with taconite seals When an application has taconite seals installed, it is recognized that this is a highly contaminated application. The focus should be on ensuring the taconite seals are fed with grease (and worry less about the bearing).
A sealed spherical roller bearing can provide a third barrier to contamination given that the external seal and housing grease pack is not fully effective.
Although there are formulas from the individual bearing companies on how much grease to apply to the taconite seal, the values derived are guidelines to use as a starting point. Fresh grease should be seen slowly purging from the seal, which would indicate that the seal/ grease system is working correctly.
How do I keep grease purging through the seals? To achieve a flow of grease through the sealing system (taconite or triple labyrinth), it essentially means regular visits by a lubrication technician or some form of automated lubrication system. These can be as simple as a single point lubricator on each seal or a more complicated multipoint automated lubrication system that feeds several bearings and seals. Automated systems still need attention at least in terms of monitoring them to ensure that they are still running, they have not been knocked off by rough handing, the lines cut or damaged, the lines being forgotten to be re-attached, and the reservoir becoming empty.
To determine the amount/frequency of grease addition to the housing cavities, it could be treated like a taconite seal, in that, there should be enough to cause some fresh grease to purge from the housing seal.
In summary, grease acts as both a lubricant and a key component of seals used in split pillow block housings. When determining re-lubrication practices of split pillow blocks, getting grease to and through the seal is of prime importance. This is achieved by both appropriate placement of the grease inlets and the appropriate timing of the delivery of grease.
Case 3 – bearing with integral seal, either taconite or triple labyrinth seal When a sealed bearing is used, the frequency of re-greasing the bearing can be significantly extended. When doing the calculation for the required frequency of re-greasing, it would be safe to assume that the cleanliness level is good to excellent. This may mean that the bearing itself will only need to be regreased every three months (depending on bearing size and the speed of the pulley). If using a taconite seal, then it should still be greased as normal, such that there is fresh grease apparent at the gap. If using a triple lab seal, then consideration should be given to either pack the bearing cavity, on either side of the sealed bearing, to 90 to 100 per cent and choose to either not replenish it or put a grease inlet either side of the bearing (many housings have a predrilled inlet to the side of the bearing or they have a dimple indicating where the grease inlet hole should be drilled).
Douglas Martin is a heavy-duty machinery engineer based in Vancouver. He specializes in the design of rotating equipment, failure analysis, and lubrication. Reach him at mro.
whats.up.doug@gmail.com.
@MROmagazine September 2022 / MRO 13 ‘won the battle’ at the inboard labyrinth. The grease had to travel across the full width of the housing, through the moving bearing to fight its ingress. The contamination essentially plugged up the inboard labyrinth, caused a dam and no grease flowed. The end cover plate that was made of steel became dished from the pressure generated by the grease gun trying to push grease into the plugged housing.
If the arrangement is OEC, then feed grease into the inboard side between the sealed bearing and housing seal. Do not feed grease to the side that has the end cover. If the arrangement is BEO, then feed grease into the cavities either side of the sealed bearing.
When is the best time for manual greasing? The best time for manual greasing is when the machine is running. This allows for the newly added grease to be pushed out of the swept area of the bearing and to freshen up the reservoirs adjacent to the rolling surfaces. It is understood that this is not always possible, so greasing when the machine is at a standstill is still better than not greasing at all.
Any plant has the potential to have a successful maintenance department, the payoff is an engaged maintenance team providing focused equipment care and customer service to the production department with a result of sustainable equipment reliability.
consider including basic maintenance fundamentals and new technical advances for the maintenance team andManyequipment.maintenance departments lack the basic maintenance funda mentals that are the core of main taining equipment. Without these fundamentals, maintenance techni cians will struggle to complete their maintenance activities successfully and with a high degree of quality.
Over the past few MRO issues, I’ve written about the role and responsibili ties of each member of the maintenance team. This installment focuses on the maintenance manager and how they influence the success of the maintenance department, their improvement goals, and the perfor mance of maintenance staff. The maintenance manager has many responsibilities; however, they have two primary responsibilities to their maintenance team:
• Lead their team to achieve and sustain maintenance initiatives that will improve equipment reliability.
101MAINTENANCE FEATURE
The Role of MaintenancetheManager
BY PETER PHILLIPS
14 MRO / September 2022 MROMAGAZINE.COM X-reflexnaja/GettyPhoto:
• High quality service to the pro duction department. A major problem many mainte nance managers face is explaining the added value of maintenance activities to upper management. According to conducted research, more than 60 per cent of top managers still look at maintenance strictly as a cost centre and necessary evil. This is a problem since it is the di rect cause of why many maintenance managers work with a tight budget and compromise on the overall quality of the work their department can deliver. A roleandtheirnegativetechnicalage,utilization,byitivetomanagement teamstrong maintenancethatdoesn’thavecompromisecanbringcompetadvantagestothecompanyensuring highassetuptimeandkeepingagoodbrandimandpreventingandeliminatingdifficultiesthatcanhaveaimpactontheproductivityoffacility.Whenlookingatequipmentuptimereliability,manyfactorsplayaforthemaintenancemanagerto
There are two elements that make up the basic maintenance fundamen tals; the quality of maintenance being performed, and the experience and knowledge of the maintenance staff.
To address these two elements the maintenance manager needs to eval uate the maintenance activities their team performs and assess the skills, knowledge, and attitudes (SK&A) of the team members. Very often these two factors need to be improved, which will help the team deliver better maintenance and build the confidence of the Thetechnician.maintenance team delivers an array of services. One of the key deliverables of the basic fundamen tals is the preventive maintenance (PM) program. Very often the PM program has not been reviewed and evaluated on a regular basis and PM routines are outdated, and mainte nance documents are poorly written andTheinaccurate.structure of preventive mainte nance has changed over the past few years, now the historical time-based PM program has been split into other categories. Time based inspections, time-based replacement (TBR), condition-based monitoring (CBM) and run-to-failure have replaced traditional maintenance programs. To implement these new systems, it may be necessary for the maintenance manager to get an internal or external specialist to help setup the new cate gories and train maintenance planners how the build a new PM program. Secondly, when it comes to the technician’s knowledge and experi ence, the maintenance manager needs to assess everyone’s SK&A and pro vide them with a roadmap to improve their performance. Providing training and hands-on experience builds the skills of each team member and their overall contribution to the team. It is the responsibility of the maintenance manager to help assess each member and to build a training plan for them. The manager may find it beneficial to seek external services, so assessments
Peter Phillips is the owner of Trailwalk Holdings Ltd., a Nova Scotiabased maintenance consulting and training company. Peter has over 40 years of industrial maintenance experience. He travels throughout North America working with maintenance departments and speaking at conferences. Reach him at 902-798-3601 or peter@trailwalk.ca.
TBR of equipment parts sounds somewhat simple, “change out the part at a set time before it fails.” How ever, determining when the part was changed last and why it failed can be difficult. Often historical equipment records are not available, therefore the normal procedure to start this TBR program is to refurbish the equipment and restore it to as close to new condition as possible. Then maintenance teams need to determine when the part will fail and calculate when it needs to be replaced to prevent a failure. Lastly, a schedule for replacement needs to be setup in the maintenance program (CMMS). Along with TBR, the equipment will also need new schedules for time-based inspection and intermittent CBM. Depending on the size of the facility and number of pieces of equipment it will take a significant investment of time to setup the new PM program. The cost of equipment refurbishment will be substantial, and the maintenance manager will need to include the added cost in their main tenance budget. CBM has been in use since the 1930s. Advancements in technology now provide continuous monitoring with real-time feedback and analysis of equipment health. The price of CBM components and software have fallen sharply the last few years, making the cost more palatable to the maintenance budget. Statistics indicate that con tinuous equipment monitoring that provides advanced warning of equipment component failure out weights the cost of sensor hardware, implementation, and yearly service contracts. Yet another activity the manager needs to facilitate and budget.
M EDIA CIALTORONTO 1.800.567.8039 1.800.361.2928 MONTREAL VANCOUVER 1.800.972.5481 Local: sewcan.ca · Global: sew-eurodrive.ca MRO_SEW_SEpt22.indd 1 2022-08-05 11:39 AM are fair and unbiased. Even the most seasoned mainte nance person can benefit from training, especially with new technology and advanced methods of inspection andTherepair.maintenance manager also needs to look at the new technical advances for the maintenance program, such as TBR and CBM.
On top of their other responsibilities, maintenance staff expect to see the manager in the maintenance shop and out on the production floor during maintenance. They want the maintenance managers guiding leadership and helping when navigating through occasional rough waters. They want regular updates on the team’s perfor mance, and want the manager to set team goals and keep themAnyfocused.planthas the potential to have a successful main tenance department. Leadership and maintenance com mitment from the top down provides the direction the maintenance staff expect. Maintenance managers and every person on the team needs to be held accountable to their roles and responsibilities. The payoff is an engaged maintenance team providing focused equipment care and customer service to the production department with a result of sustainable equipment reliability.
Q | Does the maintenanceturbinegroup have a well-designed vibration monitoring schedule?
Does the maintenance group fully understand the gas path parameters necessary to correct combustion problems?
LOGIC: Vibration analysis is an essential element of condition monitoring of gas turbines. Gas turbine bearing problems are related to lubricant quality, contaminants, wear, temperature and vibration. Rotational speeds of aero-derivative turbines may run at speeds ranging from 9,000 to 20,000 RPM, while heavy industrials operate at speeds in the 3,000 to 12,000 RPM range.
All new aero-derivatives and most industrials now use rolling element bearings to support rotors and shafts moreTheeffectively.vibrationfrequencies related to anti-friction bearings are fundamental train frequency, ball pass frequencies of the inner and outer raceways, and the ball spin frequency. These frequencies depend upon rotor speed and bearing geometry. Troubleshooters should know the name and part numbers of gas turbine rolling element bearings to obtain the manufacturers bearing geometry data and thus know the frequencies of the bearings. The bearing geometry data required to accurately calculate vibration fault frequencies are ball or roller diameter, pitch diameter, number of rolling elements and contact angle. If the bearing frequencies are not known, or cannot be obtained from manufacturers, the following calculations can be used to obtain the approximate frequencies of the bearings inner and outer raceways.
LOGIC: Compressor fouling occurs due to foreign deposits on the blades, plugged or damaged fuel nozzles and damaged combustor liners. Normal operation depends on fuel flow, exhaust gas temperature and compressor discharge pressure. The turbines cycle signature is related to power output, corrected turbine inlet temperature, rotor speed and performance factors including pressure, temperature, speed, fuel flow and BHP.
Q | Does the maintenance group understand how to monitor and manage fuel and governor controls?
LOGIC: Problems such as ‘hot’ starts are usually caused by a too rich fuel schedule, while ‘hung’ starts may be the result of a too lean fuel schedule. Running problems such as an inability to accelerate, or a too rapid acceleration, are usually caused by a governor problem. Both pneumatic and hydraulic governor controls are susceptible to leaks, contamination, and wear. Pneumatic systems can also be erratic if moisture is in the air lines. The trouble-shooter must know how the control systems work, Gas troubleshootingoperationalturbine Gas turbine efficiency can be determined by concentrating on troubleshooting four important areas: gas path analysis, fuel control systems, vibration, and lubrication.
FEATUREQUIZMRO
Q |
# of Rolling Elements X Shaft RPM X 65 per cent Outer Race Frequency # of Rolling Elements X Shaft RPM X 45 per Resonantcentfrequencies are found in every piece of equipment and turbines are no exception. Resonant frequencies that may affect turbine operation can be found in rotors, base plates, mounting pads, piping, and bearing or bearing supports. Other sources of vibration include rotor imbalance, looseness, and misalignment.To obtain as much vibration data as possible, it is wise to measure displacement, velocity, and acceleration. Proximity transducers are recommended to measure displacement at radial bearings. Accelerometers are used to measure high frequencies of turbine blade vibration, while the most uniform measurement of vibration
The gas path consists of the compressor, combustor, and turbine, all of which are susceptible to damage by contamination, fouling, erosion, corrosion, sulphidation, nitration, oxidation, water emulsions, plugged or damaged fuel or turbine nozzles, and broken blades or vanes.
BY L. (TEX) LEUGNER
Inner Race Frequency
Photosoup/GettyPhoto: 16 MRO / September 2022 MROMAGAZINE.COM how to recognize malfunctions and verify corrosion, erosion, and foreign damage with a borescope inspection.
LOGIC: A typical 250-hour turbine oil analysis report should reflect the following results.
Q | Does the maintenance group use the best techniques available for turbine lubricant analyses?
Remaining Useful Life Evaluation Routine (RULER): measures the antioxidant additives (amines and phenols), in turbine oil by ASTM D6810-02 or D6971. RULER result of 50 per cent provides a warning, any result of 20-25 per cent indicates immediate action required.
L. (Tex) Leugner, the author of Practical Handbook of Machinery Lubrication, is a 15-year veteran of the Royal Canadian Electrical Mechanical Engineers, where he served as a technical specialist. He was the founder and operations manager of Maintenance Technology International Inc. for 30 years. Tex holds an STLE lubricant specialist certification and is a millwright and heavy-duty mechanic. He can be reached at texleug@shaw.ca.
Ultracentrifuge (UC) : determines the level of insoluble contaminants that indicate varnishing, zero reflects new oil, four is considered marginal and a UC value exceeding six is critical. Total Acid Number (AN): is an indication of the remaining useful life of a lubricant by ASTM D664 or D974. New turbine oil has an AN of about 0.03 and in service turbine oil must not exceed 0.2. Water by Karl Fischer: by ASTM D6304, determines the amount of water. Acceptable water levels are less than 500 ppm, unacceptable levels are 1000 ppm. ISO Particle Count 4406: measures the number of particles in lubricants in size ranges of four, six and 14 microns by optical particle counter. New turbine oil cleanliness standards are 16/14/12 or as specified by the turbine manufacturer. In service turbine lubricant cleanliness levels should never exceed 18/15/13. When any combination of these results indicate unacceptable contamination levels, increased varnish potential, or a buildup of insoluble materials, immediate action is recommended.
Is the maintenance group fully aware that proper turbine lubrication is critical?
LOGIC: High operating temperatures and catalysts like water and air cause oxidation and thermal degradation of the oil that generate varnish and sludge. Oxidation is a chemical reaction when oil is mixed with oxygen. Thermal degradation occurs in the combustor at temperatures around 205ºC (400ºF) or higher, or when trapped air bubbles travel from low to high-pressure areas. The hot air bubbles implode, and the high concentration of heat raises the oil temperature
Electrostatic discharge occurs in lubricants due to internal molecular friction and differences in electrical potential between the fluid and component surfaces and contributes to varnish and sludge formation. Static electrical discharge occurs at servo valve surfaces, in filters and reservoirs and spark discharges can reach temperatures of 20,000ºC, promoting thermal degradation instantly. Static discharge can be heard if one is close enough to the reservoir of an operating turbine where this is occurring. As little as 500 PPM of water can promote foaming, emulsions, and bacterial growth. Oil sight glasses may show these conditions. Contaminants will cause scoring and wear on bearings and control valves in governor systems. Other contaminants include water/ glycol mixtures in coolers, and it is recommended that the oil side operating pressure of the cooler be higher than the water side operating pressure.
Q |
Membrane Patch Colorimetry: measures varnish potential; a varnish potential of 35 or less is normal, 50 and higher is considered severe.
Symptomsdramatically.ofnitrogen oxides and oxidation include an increase in viscosity, acid number and oil discolouration, all of which indicate serious degradation that results in tar-like deposits on mechanical seals, varnishing on inlet vane valves or bearings, thick deposits trapped in oil filters and premature plugging of oil coolers.
Symptoms of nitrogen oxides and discolouration,numberviscosity,increaseincludeoxidationaninacidandoil all of which indicate degradation.serious
@MROmagazine September 2022 / MRO 17 data is velocity to detect a wide range of vibration data occurring at low, mid, and high frequencies. Vibration data should be collected in the vertical, horizontal, and axial positions.
General tips for safe operation
Heavy equipment allows manufacturers to achieve incredible results, from building vehicles and pre fab housing to keeping communities supplied with the necessities of life.
When hazards have been identified, and risks assessed and controlled, workers preparing to use heavy ma chinery should start with a thorough visual assessment of the equipment. Check tires for signs of wear or loose parts and verify fluid levels. Are any parts cracked or damaged? Test that its lights, horns, and backup alarms are working properly. Is any of the equipment’s normal movement or extension impeded in any way? Never operate a machine that isn’t working exactly as the manufacturer intend ed, and do not substitute a machine designed for a different task. Required safety equipment for workers may include roll-over pro tection, seatbelts, guard rails, and personal protective equipment such as hard hats, gloves, hi-vis clothing, and steel-toed work boots. Ensure that all workers in the general vicini ty understand the hazards and where the working circle is, how to stay clear of it, and how to signal if something is wrong.Equipment size and noise may pre vent equipment operators from being able to see or hear if a co-worker is nearby, so it is important that every one in the workplace understands
&HEALTHSAFETY
BY CANADIAN CENTRE FOR OCCUPATIONAL HEALTH AND SAFETY (CCOHS)
However, operating heavy equip ment, or working near it, comes with an increased risk of injury and even death. Workers in facilities with heavy equipment must receive thorough training on the proper operation of the equipment, and steps to take to ensure the safety of those close to it.
Identify hazards and assess risks Hazards associated with working with or near heavy equipment will vary depending on the exact equipment used. Struck-by injuries may occur if the operator’s sight is obstructed or poor, either due to carrying a load or equipment or plant design. Work ers can also get caught between the equipment and a wall or crushed if equipment is overturned. Exposure to moving parts, hazardous energy (gravitational, electrical, electromag netic, magnetic), hot or cold, noise, and vibration should also be consid ered. Wherever gas or liquids are un der pressure, there is a risk of injuries from injection from these pneumatic or hydraulic systems. With the in creased risk of serious injury comes psychological hazards such as stress and other mental health risk factors.
Working safely with heavy equipment
18 MRO / September 2022 MROMAGAZINE.COM FEATURE
Safe and healthy workers are at the heart of any operation, investing in their well-being and safety will always provide a strong return.
Since there are many different types of machines and processes, a risk assessment should be conducted, and control measures implemented for each machine or situation be fore it’s used. It may be necessary to involve people with specialized or technical expertise such as an engineer, safety professional, or the equipment manufacturer. Pre-op erational checks and an assessment of the workplace prior to using any machinery is critical. Workers should be trained on procedures for mount ing and dismounting machinery, the capacity or payload of each machine, its swing radius, and how much of a buffer zone or ‘working circle’ is re quired that other workers must stay clear of.
assistant/GettyyourforyouThankPhoto: Never operate a machine that isn’t working exactly as the intended,manufacturerand do not substitute a machine designed for a different task.
However, let’s not forget that safe and healthy workers are at the heart of any operation. Investing in their well-being and safety will always provide a strong return.
The Canadian Centre for Occupational Health and Safety (CCOHS) promotes the total well-being — physical, psychosocial, and mental health — of workers in Canada by providing information, advice, education, and management systems and solutions that support the prevention of injury and illness.
Foster a psychologically safe workplace
2. Identify who will be using the equipment, and how often.
v2.5 π ORDER BY 6 PM FOR SAME DAY SHIPPING 1-800-295-5510 uline.ca OVER 2,200 LABEL PRODUCTS IN STOCK MRO_Uline_Sept22_CSA.indd 1 2022-08-10 9:02 AM
Visit www.ccohs.ca for more safety tips.
Consider using two-way radios or have a spotter nearby to warn nearby workers of danger and signal to the operator to stop. In the event an inju ry occurs, workers should be trained on who to alert and how to dispatch emergency services swiftly.
7. Re-assess to estimate the new risk level.
Understand the equipment and how to use it
@MROmagazine September 2022 / MRO 19 the proper means of communication if access to the area is required.
An integral part of maintaining a safe workplace with heavy equipment is ensuring workers feel encouraged and supported to come forward with any health and safety concerns, including psychological safety. They should know that they can flag any perceived safety issues to their super visor and not fear repercussions.
There are several ways employers can encourage psychological safety: through workload management, clear leadership, civility and respect, and protection of physical safety, to name a few. In addition, ensuring there are adequate breaks for workers through out the day, implementing fatigue management programs, and educating workers about substance use and how it can affect fitness for work. Supervisors can encourage psy chological safety by checking in with workers regularly to make sure they’re maintaining work-life bal ance and not experiencing burnout or other symptoms of decreasing mentalHeavyhealth.equipment and machinery have been a boon to the manufac turing sector, helping to increase outputs and achieve targets while im proving safety outcomes for workers.
1.safely.Identify all tasks performed by and associated with the equipment. What hazards may occur from use and misuse? What moving parts and corresponding safeguards are currently in place?
6. Use protective measures to control the risk of each hazard, considering the design, safeguarding, administrative controls, including training, and other measures such as personal protective equipment.
5. Eliminate hazards where possible.
ASSESS THE RISK OF EACH PIECE OF ORDER:EQUIPMENTPOWEREDINTHIS
3. Determine how the equipment will be used.
8. Repeat the process if the risk level has not been eliminated or effectively controlled. 29, 2022 11:51 AM Print: 08/09/22 page 1
4. Estimate the risk of each hazard by considering the severity of possible injuries and or incidents, and the likelihood of occurrence.
22_001959_MRO_SEP_CN Mod: July
20 MRO / September 2022 MROMAGAZINE.COM MANAGEMENTASSET FEATURE
A few years ago, speaking with the team that had helped develop the ISO 55000 Asset Management Systems Standard Suite, it was asked who they thought would be interested in certifying to the standard. Surprisingly, one of them said that they really weren’t concerned about it.
The submission date for the initial core asset plans has passed and if you visit most municipality web sites you will find a link to their asset manage ment plan (AMP). While everything seems to be in place, at least to meet the requirement of the regulation; however, when digging deeper, it becomes apparent that the AMPs are not quite what they appear. What has happened in most mu nicipalities is that to comply with the regulation they have taken a snapshot in time and considered that as the basis for the plan. This might seem the obvious way to go but much like the
BY CLIFF WILLIAMS
Song_about_summer/AdobeDesigner491/Getty;Clockwise:Photo
Compliance or intent Being ISO 9000 certified should be an indicator of doing good businesses and standardizing performance; however, for the longest time – it wasn’t.
During the discussion, he explained that he was involved with many orga nizations that certified to various ISO standards and found himself very disappointed with their performance and approach. It seemed to him that the goal of certifying was being able to ‘fly the flag’ proudly on their build ings, not actually using the standards to help drive improvements. This took me back to my experience with the early days of ISO 9000 and the mad scramble to become certified. At that time, being ISO 9000 certified was becoming the price of admission for doing business, if you wanted to be a preferred or qualified suppler, you had to be 9000 certified. This should of been a good indicator of businesses improving and standardizing their performance; however, for the longest time – it Organizationswasn’t. took the standard to mean that they should document what they intended to do and then prove that they were doing it – even if what they were doing was making an inferior product. The point that the standard was supposed to give the organization a consistent basis on which to build and improve their per formance was missed, as the question that organizations were really inter ested in answering was “Are you ISO 9000ISOcertified?”9000developed over the years, but by that time many organizations no longer saw the value in being cer tified, and didn’t do more than what was required by the audit to continue certification. Compliance to the standard’s requirements had missed on the intent of the standard. Today, we see different uptake in the ISO 55000 suite around the world. In Canada there has been more activi ty, with Ontario producing O.Reg. 588/17 Asset Management Planning for Municipal Infrastructure. This regulation was enacted with the intent that municipalities would take a structured approach to manag ing their assets and making best use of the grants, taxes, and other funding. While also providing value to their stakeholders by ensuring their pro cesses and procedures were the most effective and efficient they could be.
It seemed to him that the goal certifyingofwas being able to ‘fly the flag’ proudly on their buildings, not actually using the standards to help drive improvements.
Havingones.seen instances where there is not sufficient data to support what is reported, other than an opinion, or instances where one or two people have produced these AMPs with scant involvement from asset owners, or instances where asset owners very quickly abdicate any responsibility for providing meaningful data or developing meaningful processes.
September 2022 / MRO 21 early days of ISO 9000, there is no evaluation as to whether what you are doing today or the results you are getting today. are the right
When we look at how this situation can exist, we often find that those close to the top of the organization feel the same way, and when asked about their role in driving sustainable asset management they openly admit that they tend to defer to the asset management department forO.Reg.understanding.588/17missed out on what were the most important points of ISO 55000 suite, and that was the influence of leader ship and culture on the success of any sustainable, holistic asset management endeavours. What happened is that municipalities continue to behave the way they have always behaved, do the things the way they always did them, live with the culture they have always had, which ended up with the results that prompted the introduction of O.Reg. 588/17 to correct this.
There has been good work done by good people to produce these AMPs, but once again we have fallen into the trap of the goal being to meet compliance at the expense of intent. The interesting sidebar to this is many of those municipalities who are not covered by the O.Reg. have recognized the need for leadership and culture influ ence and have worked on those as the basis for building their AMPs. Therefore, it seems when or ganizations must comply , they tend to see nothing else other than the certification. They must comply but not viewing it from the perspective of intent does not lead where the com pliance is meant to. This can permeate through organizations where people do the same thing at department level, take the fa vourite maintenance KPI of PM compliance and achieve certifi cation. However, equipment is still breaking down because they are the wrong PMs or are being done incorrectly.
MRO_Benchmark_June21.indd 1 2021-05-11 1:23 PM
Cliff Williams is author of the bestselling maintenance novel People – A Reliability Success Story. He is a maintenance and asset management educator, and a keynote speaker at conferences worldwide, who believes success is achieved through people. Currently, he shares his knowledge and experience as an advisor on maintenance and reliability for people and processes, and asset management with TMS asset management and is a facilitator for PEMAC’s Asset Management Program.
BY BRYAN CHRISTIANSEN
Mistakes from operators: Machine operators can perform their tasks erro neously, causing mechanical problems. This could be due to a lack of training or experience of the operator. The operations teams might not have stan dard operating procedures (SOP) in place, leading to errors from operators, damaging mechanical components. Establishing SOPs and enforcing them with checklists reduces the mistakes performed by operators. Increased automation is another way of eliminating the potential for operator mistakes.
Mechanical components in a factory require the most attention from a maintenance perspective, as they have a high propensity to fail, making it a high priority for maintenance teams. In turn, it is always better to prevent failures than resort to reactive maintenance.
Overheating: Mechanical compo nents in operation generally produce heat. This is due to friction when two surfaces slide against each other. Ma chines are designed to factor in this heat due to frictional forces.
Why perform routine checks? Routine checks are performed to in spect machines and their components for any sign that could indicate a future failure. Routine checks are performed as a preventive measure. Trained maintenance professionals and operators inspect machines in operation and in an idle state. They are looking for signs of material degra dation. You also need to check for any anomalies such as odd sounds, bangs, sparks, and unexpected output. The anomalies identified must be investigated to find their cause. Recti fying them avoids mechanical failures and the costs that damage could cause. Routine checks help to identify smaller faults that have not manifested to a noticeable scale. Rectifying such faults in a timely manner ensures potential large failures do not happen.
Importance of routine checks for mechanical repairs
Positive impacts of routine checks include: Downtime Routine checks help to identify small faults before they grow large enough to cause machine failure. When such faults are identified, maintenance can be scheduled in such a manner that it does not affect factory operations. Rectifying the problems eliminates
22 MRO / September 2022 MROMAGAZINE.COM /AdobeStockerNVBPhoto:
Overheating is an indication of some fault in the machine. The root cause could be improper installation, lack of lubrication, or leakage of coolant. You need to perform root-cause analysis to identify the underlying cause that is manifested as overheating and rectify it.
It is important to note that routine checks help in pre venting mechanical troubles in the factory. Let’s look at some of the most prevalent mechanical failures experienced by machines in a factory. While also considering how routine checks have the potential to be an antidote to mechanical failures. Different forces act on mechan ical components while they are in operation. They work in an environ ment where interaction with other components and people in the fac tory is necessary. Such factors cause mechanical failures. Common mechanical failures and their causes Wear and tear: The most common mechanical problem experienced in any machine is the wear and tear of components. When machines are in operation, there are frictional forces acting between components. This friction causes material degradation of Materialscomponents.degrade to an extent where they can no longer perform their functions. Another risk is the sudden failure of the component while it is in operation. Components experiencing wear and tear need to be replaced before they evolve into a larger failure.
MAINTENANCEMECHANICAL FEATURE
Improper maintenance: Machines and machine components each have a limited life, which depends on regular maintenance and upkeep performed. Scheduled maintenance activities must be done to make sure machines and their components are utilized to their full potential. Regular mainte nance and replacement of worn-out components is required to prevent mechanical failures and extend ma chine life.
Bryan Christiansen is the Founder and CEO at Limble CMMS (a mobile CMMS software company). He can be reached at bryan@ limblecmms.com.
Routine checks will help to catch mis takes in the start, reducing the mainte nance needs of machines.
@MROmagazine September 2022 / MRO 23 the chance of unscheduled downtime. This will ensure that maintenance ac tivities can be performed to cause min imal disruption to factory operations.
Maintenance frequency Routine checks force the maintenance team to identify the root cause of any small faults that occur.When the faults are minor, they will be observed closer to the root cause. In operations where routine checks are not done, you will get to know of faults only when a large failure occurs. The root cause of problems becomes difficult to identify. Reactive main tenance in most cases will be able to patch up problems at the surface level. The root cause will be the origin of more failures that will require regular maintenance and machine downtime.
Machine lifE Machine life depends on many factors in its operations. Minor faults are un avoidable in any machine operation.
Routine checks help to catch smaller anomalies and defects before they be come a larger failure. Routine checks help in performing preventive main tenance, making the machine more robust compared to its counterparts that undergo reactive maintenance.
Wastage Mechanical faults cause wastage in many forms. Increased energy con sumption for operations is a common effect of mechanical trouble. The consumed energy could be electrical energy or heat from the combustion of fossilSimilarly,fuels. mechanical faults can cause an increased consumption of raw materials, lubricants, and coolants.
Wastage can be avoided with routine checks and rectifying even minor mechanical faults that are observed. This ensures sustainable plant opera tions and an increased utilization ratio of resources.
Sustaining the faults without any rec tification damages the machine. Larger catastrophic failures could also happen due to the compounding of smaller faults. These factors adversely affect the life of the machine.
Scheduling routine checks
Routine checks are indispensable for proper operations and the mainte nance of machines in a factory. They come with many benefits that save a lot of time, energy, and money. You need to incorporate routine checks as part of regular machine op erations. Create a checklist of tasks that must be performed on a daily, weekly, and monthly basis to inspect the health of machines. Making these checklists accessible to all maintenance and op erations teams is a wise idea. This helps anyone interested in fol lowing and performing routine checks.
A cloud-based computerized mainte nance management system (CMMS) is ideal for maintaining the checklist for routine checks.
The new alignment certification will document exactly what an alignment specialist is certified to perform in the way of alignment tasks according to the latest internationally accepted standards.
BY JOHN LAMBERT
In brief, it is a certificate in machinery installation and shaft alignment targeted for mechanics, millwrights, technologists and engineers, while it will allow the in dividual to show their level of expertise or skill level. For the maintenance manager, they can see who does and doesn’t hold this valuable skill set. For the contractor, they can show the quality and value of their staff and the company this staff represents. What is the CMVA and why do we need it? The CMVA, in collaboration with in dustry, is working to continually improve machine asset reliability. This is mainly achieved through knowledge-sharing. CMVA is an International Standards Organization (ISO) 17024 compliant certification body as accredited by the Standards Council of Canada. It validates the knowledge of hundreds of machine vibration analysts, many of whom are also certified mechan ics, millwrights, technologist and engineers, through a certification process, based on ISO 18436 series of Certificationstandards. is available in four lev els (categories I, II, III and IV) for the vibration analyst, being an individual who is certified in vibration analysis at a certain level and is competent in spe cific tasks to that specific level. The ISO created ISO 18436-2, which specifically defines all these tasks. CMVA certifies that the individual who has trained to this standard is competent, proficient, and skilled to their level. This is important, as for example, If you go into a doctor’s office, you nor mally see their credentials on the wall. This gives you confidence in their ability (competence, proficiency, and skills) to diagnose and treat you. If you fell afoul of the law, you would want to know that your lawyer was also qualified. It is the same in our industry, as it wouldn’t make sense to invest in a vi bration analyzing instrument, and not have a certified operator to use it. If you contracted this service out, would you get a company that was certified, or would you hire someone who says they are competent?Yes, they may have been doing it for many years, but are they skilled and proficient at it? How would they know? How would you know? For a vibration analyst, it’s about interpreting what they see, including amplitude, frequency, and spectra, which may point to a problem such as misalignment or imbalance. It can be the same for millwrights and mainte nance mechanics who must interpret and analyze different scenarios on a regular basis, including visual inspec tions of the base and machine setup, which can similarly point to problems.
Let’s face it, even in high school we wanted to stand out (for the right reasons) and in today’s business world we call this a differentiator. Being different, standing out from the crowd, being unique.
Years ago, when I started my busi ness, I went to a plant requiring an alignment done on their machine (mo tor to compressor). At the time, laser alignment work was still very new and upon arrival, a group of maintenance employees wanted to see it in action. One individual had a big straightedge and declared to all those on that site that the machine had to come up. I quickly setup and took some read ings. My conclusion was that there had to be an amount of shim to be removed from the machine; in fact, lowering it. This did not go over well with the one individual, and he told me again, in no uncertain terms, that the machine had to come up. If you look at the basic sketch (above), the straightedge (the line) shows a gap between the edge and the top of the coupling hub. Yes, if we are moving the machine on the right, it needs to come up, but to do that you have to lower the backend of the machine. This is due to the large amount of angular misalign ment. In fact, you must lower both bearing supports to achieve shaft to shaft alignment as you can see (below) on the same graphic. This will not be the first or last time this mistake is made. However, we must be competent and skilled, and we must in terpret and analyze what we see. Using a straightedge to align two shafts takes skill, and many received this training at trade school. Some only got ‘on the job’ training, and in my experience,
24 MRO / September 2022 MROMAGAZINE.COM ANDKNOWLEDGETRAINING FEATURE
The new certification program offered by the Canadian Machinery Vibration As sociation (CMVA) will allow maintenance professionals the opportunity to stand out. However, the big winner will be asset machinery reliability.
A changeprogramcertificationthatwillmaintenance
PDMBenchmarktravenian/Getty;clockwise:Photos
Basically, using trial and error. Present day maintenance me chanic and millwright programs differ on what they teach. For example, the colleges that I am involved with in Ontario, mainly teach rough-in alignment (using straightedges) and the rim and face dial alignment method, and basic laser alignment. In Western Cana da, they cover more, including rim and face, reverse dial and cross dial alignment method, basic laser alignment and advanced alignment work, and bore alignment, which is basic geometric measurement (straightness).Whatthisall means is that we do not have a level playing field in this important and fundamental skill.
September 2022 / MRO 25 30-34 Rue du Chemin Vert 75011 Paris +33 (0)1 85 56 97 00 www.carrenoir.com Ce fichier est un document d’exécution créé sur Illustrator version CS6. TECHNIQUETONS RECOMMANDÉS TOTAL DateJFBTOT_21_00008_TotalEnergies_Logo_RGB26/05/2021 Choose Nevastane for food foodOfferingapplicationsindustryimprovedperformanceforeveryindustryapplication, Nevastane products protect your equipment and extend its working life. totalenergies.ca EN_MRO Publication 5.875x7.875.indd 1 2022-05-13 09:44:50 MRO_TotalEnergies_June22.indd 1 2022-05-13 11:39 AM
Change coming as CMVA will offer alignment certification program This certification will validate the knowledge of many millwrights and maintenance mechanics. It is based on the American National Standard (ANSI) Shaft Alignment Methodology, Part one. It will also include many methods that are a requirement of the Canadian Mill wright Red Seal program.
To understand the scope of this, at present there may be two cer tified vibration analysts per plant, whereas this same plant would have at least 10 skilled tradespeople involved with machinery installation and shaft alignment. By pursuing this standard, it allows a tradesperson to become specialized, accredited, and certified. When companies look to hire, they look for a differentiator, something that make them unique to stand out. It makes that individual more valuable, which is a benefit to both employee andCompaniesemployer.who invest in training want to know if their investment has paid off and they will know if the certification is earned. Contractors who provide this service, will be able to prove their proficiency andThevalue.new alignment certification will document exactly what an alignment specialist is certified to perform in the way of alignment tasks (including analysis), according to the latest internationally accepted standards. It will assure the plant owner a minimum level of quality maintenance that their assets are receiving. It is a win-win situation, but it will not happen overnight, there will be some adjustment along the way. Level one will be offered as a two-day course at this year’s CMVA Annual Technical Conference in October.
There will be two levels; level one will cover the removal of static strain, distorted bases, softfoot, pipe strain, as well as rim and face and basic laser alignment. Level two will cover all of level one, plus the removal of dynamic strain (thermal growth), cross dial or reverse dial including the graph ical and mathematical corrective calculations and advanced laser alignment work. This is big news Why? What the CMVA did for vi bration analysts (tradespeople, en gineers) by bringing accountability to prove their proficiency – they can now do the same for millwright and maintenance mechanics, and others involved in machinery in stallation and alignment.
John Lambert is the President of BENCHMARK PDM. He can be reached at john@ benchmarkpdm.com.
the correct use of a straightedge is not shown ‘on the job’. The reason is that nobody wants to be taught what is perceived to be such a simple measurement process, therefore, the individual learns it by themselves.
Q | How sustainable is this system in comparison with previous HVAC systems?
Importance ofair quality MRO sat down
EnerSavings to speak
LISSO : Three years ago and today, it’s a night and day difference. Air quality has not been a forefront concern, until the pandemic struck, as it was below average before the pandemic. It has become much more important in workplace environments, health care facilities, hospitals, gymnasiums, almost everywhere. Businesses would have a service contract with their HVAC company, which would come out once a month or every quarter and change the filtration system. Essentially clean the unit, oil, and lubricate any motors, make sure the tension was correct on the belts, and top up Freon levels. There was a maintenance focus, and the filtration was an add-on or afterthought. Typically, the older filters in rooftop units and in each HVAC system are like the ones in homes. A mesh filter that captures the larger particles of dust is designed to protect the equipment, but not the air quality in the business. Since COVID-19 started, companies are looking at this much differently. They are thinking, “what can we do to decrease or eliminate the num ber of microbes in the air, which weren’t important to us before but are certainly out there.” Inexpensive products exist, one is an ignitor system, and one is the UV light system. Both sys tems will eliminate 99 per cent of harmful particles, COVID-19 related particles and others. There is no maintenance work required with these systems, as it all comes down to a UV light on the inside of the ductwork. As the particles go by, they’re killed on contact with the UV light. These systems eliminate larger and smaller dust particles, which is important for the oper ating machinery and operating equipment. They are eliminating smaller particles that would be recirculated through the air.
BY MONICA FERGUSON
LISSO: These systems use very little electricity, which allows for operations to run a lot smoother. It is much cleaner in comparison with Kevin Lisso, CEO, about air quality.
26 MRO / September 2022 MROMAGAZINE.COM The World of Bearings and Power Transmission... XtendaTM Stainless Steel Cam and Cam Yoke Followers Hi-RollerTM Bearings enables us to respond rapidly to your requests. Our manufacturing can handle any size order. Our quality control procedures ensure consistent tolerances and our engineering expertise give you a deep knowledge base to draw on. • Standard Needle Bearing Cam and Cam Yoke Followers • Eccentric Stud Cam Followers • Heavy Stud Cam Followers • Neverlube ™ Cam and Cam Yoke YourFollowersResource for Precision Bearings BALL BEARING UNITS One of the world’s oldest mounted bearing manufacturer, they are available in wide array of sizes and styles. For Special Environments try Ceraball Hybrid Bearing Units good for up to 450° C (842° F) MONTREAL TORONTO WINNIPEG EDMONTON VANCOUVER (514) 685-6006 (905) 826-1100 (204) 694-1455 (780) 465-3311 (604) 294-3461 Fax (514) 685-6007 Fax (905) 826-9691 Fax (204) 633-7230 Fax (780) 490-4664 Fax (604) 294-4680 montreal@ringball.com toronto@ringball.com winnipeg@ringball.com edmonton@ringball.com vancouver@ringball.com MRO_Ringball_April.indd 1 2017-03-28 2:06 PM &QUESTIONANSWER FEATURE Air quality in work places is not as simple as it may seem. How do you go about ensuring your businesses’ HVAC system is enhancing air quality by dealing with the pesky microbes you might not see but are certainly there. We look at what aspects need to be looked at with Kevin Lisso. Q | Can you provide an overview on the current air quality in workplaces and the impact COVID-19 had?
Vectorman2017/AdobePhoto:
LISSO: There are thousands of different dust particles, dust mites and microbials. The filtration systems prior to COVID-19 were expensive and the main objective was capturing larger particles to protect equipment, leaving 90 per cent of smaller particles in the air. Using UV light, a reactionary process happens, which burns and eliminates 99 per cent of any airborne particles dangerous to our health. It is a vast improvement from before. The microbes that are harmful to our health and operation are reflective, which the UV light can detect and instantly eliminate. The microbes that are ‘good’ for our health are not reflective, thus the UV light would not interfere.
Q | What steps can a company take to increase their air quality?
heretkCreditPhoto: @MROmagazine September 2022 / MRO 27 DISTRIBUTED IN CANADA BY LinearSystemsRail SBC Linear Rail System Ball LinearRobotCrossLinearSupportScrewUnitsBushingsRollerGuideCarrierGuideActuator Great Products. Great Reputation. Quality bearings are only one aspect of RBL’s product line. We take pride in our products that encompass bearings, rod ends, bushings, sprockets, roller and leaf chains along with a range of power transmission products. To assure product availability and the best possible service for our customers, we have extensive inventories at our five regional warehouses. Ball SpherCylindricalBearingsBearingsicalRollerBearingsSplitPillowBlocks Adapter Sleeves Locknut & RodSlewingLockwashersRingsEndBearings Ball Bearing Units Stainless Steel Units Spherical Plain Bearings Bronze Bushings www.ringball.com to the previous systems that would generate a dirt buildup which would restrict air flow and be tiresome on the motors. Now, there is less maintenance required and less breakdowns. From a sustainability stand point, it saves money on oper ating costs since the system is running more efficiently. Q | Which particles are being eliminated in this process?
LISSO : Speak to a HVAC company to conduct an assess ment. Companies will come in with devices to show you what PPM is passing through your system. Assessments shows the type of air quality you have cur rently, what type of air filtration system you have in place, and give recommendations. They will evaluate the assets, put together a proposal, and elim inate air particles that need to be eliminated.
LISSO: There’s a lot of scam mers that are preaching that their product does various things, which are not true. My advice is to be very careful when choosing the right type of air quality control systems, and do your homework. Ensure the product has been vetted and has the proper accreditations. Al ways ask for referrals. We’ve seen a lot of products that make bold claims, and are just not true. The government has a web site that lists approved products.
Q | What manufacturesshouldbe weary of when upgrading their HVAC?
Q | Is there any government assistance theirbusinesses’regardingupgradingHVAC?
LISSO: Yes, business owners should reach out to municipal, provincial, and federal levels. Ask what’s available to better air quality and ask what kind of assistance is available. There are some great programs offered by the Ontario provincial govern ment, which can subsidize air filtration system costs. Monica Ferguson is an associate editor for MRO magazine, Plant magazine and Food and Beverage magazine at Annex Business Media.
28 MRO / September 2022 MROMAGAZINE.COM WHAT’S NEW IN PRODUCTS
Fanuc IIOT software AI servo monitor uses AI to predict possible failures of the drive systems for Fa nuc servomotors and spindle motors. In conjunction with MT-LINKi through machine learning, the monitor analyzes daily performance of machines equipped with Fanuc CNCs. Daily data is displayed in graphs to monitor abnormalities on these machines. AI creates a baseline model of the machine while running in a normal state. An ‘anomaly score’ developed expresses a difference in the baseline model and the daily recorded values. www.fanucamerica.com SPEEDTAPS NOW AVAILABLE IN NORTH AMERICA Made in Canada, KBC Tools and Machinery’s SpeedTaps are M2 steel and are meant to be driven by an impact gun along with an impact socket, for through-hole applications allowing the user to quickly move the
PNEUMATIC INDEXING PLUNGERS
CUTTERSGUILLOTINEREDESIGNEDPIPE
Reed adds to its line of guillotine pipe cutters with the updated Reed HPC4+ model. Weighing 11 pounds, it cuts square on medium and high-density PE pipe used by water and gas Accurateutilities.cutsfrom the guillotine cutters mean no facing is needed for electrofusion and only minimal facing for butt fusion joints. An all-aluminum construction means lighter tool weight and greater rigidity. HPC4+ cuts through 1-1/2 inch through four-inch HDPE, both DIPS and IPS. Slight taper on blade allows an unchallenging start to the cut and holds form for a straight cut. www.reedmfgco.com TYPE II+ HARD HATS FOR INDUSTRY WORKERS
CERTIFIED MULTI-AXIS COBOT SYSTEM Festo UR+ certified multi-axis solution for universal robotics cobots adds up to four axis of motion beyond the UR cobot six axes. The multi-axis system requires no programming during the set up and no additional PLC is required. Multi-axis are configured through the UR HMI. End users set position, speed, and acceleration on the HMI or using the URCap toolbar, move the axis in manual mode to configure motion. The multi-axis system features the Festo Motion Control Package (FMCP) for UR, which is a complete motion control panel for up to four axis motion. The FMCP is fully integrated with the UR cobot control panel and HMI and features a UR safety I/O and commu nications interface. The FMCP can control turning tables, automatic storage systems, convey ors, and transfer tables, under the UR umbrella. The FMCP has extra space within the panel for future expansion and brackets for wall mounting. www.festo.com
BOX-LEVEL CONTROLLERSMOTION
Endress+Hauser has developed Mi cropilot FWR30, a wireless 80GHz IIoT sensor. Its recorded measurement data can be accessed remotely via the sensor’s cloud FWR30connection.enablesreal-time monitoring of often remotely stored inventories of substances like liquid additives in plastic or metal tanks, cleaning agents in food and beverage produc tion, or for solids like building materials at construction sites. Its setup covers level measurement in plastic and open tanks. An optional process connection enables measure ment of media in metal tanks like ani mal feed in agriculture or storage of wood pellets for heating systems. FWR30 can be installed without special tools in under three minutes. The unit’s integrated battery means no external power supply is need ed. The free space radar sensor cov ers measuring ranges up to 15 metres and temperatures between -20°C and 60°C. www.endress.com
WIRELESSENDRESS+HAUSERIIOTSENSOR
Nippon Pulse announced the second generation of box-level motion controllers, the Commander box The(CMD-4EX).biggestimprovement to the new CMD box controller is the switch in USB interface from a custom API to a Windows HID API, which allows users to get the device up and running without installing additional software. The second-generation controller features helical interpolation on the X-Y-Z axes and allows for circular and arc interpolation between any two axes, not just X and Y. CMD-4EX has a built-in four-axis driver with a TBD option, a pulser and an extra axis of buffer compared to the PMX. www.nipponpulse.com
JW Winco expands its indexing plungers’ range with GN 817.7, which is pneumatically actuated and can be integrated into automated processes. The new indexing plunger detects both end positions with a single sensor. It can be used in hard-toreach locations and integrates into automated processes. The high signals upon reaching the respective end positions are transmitted directly over the four-pin M8 cable plug to the control unit of the system. The indexing plunger operates with pressures between four and six bar, while the IP 67-compliant sensor emits DC signals between 12 and 30 volts. www.jwwinco.com
WaveCel launched Type II+ fullbrimmed hard hats including Wave Cel T2+ MAX vented hard hat for all-day wear, and WaveCel T2+ PRO non-vented hard hat for electrical jobs. WaveCel hard hats are Type II certified and protect against rotational forces in addition to lateral WaveCelimpacts.isanetwork of hundreds of interconnected shock absorbers attenuating impacts through three principal mechanisms: flex, crumple, and glide. Cells crumple to absorb linear forces; they also flex and glide to attenuate rotational forces. www.WaveCel.com
FANUC ANALYSISHEALTHMACHINEDATAANDMONITOR
www.morsehydraulics.com
WATERGATER VALVE
Emerson launched its Aventics series Servo Profile Advanced (SPRA) electric actuators, a line of rod-style cylinders. SPRA actuators offer three screw technologies: including a precision ball screw, a lead screw option, and roller screws. This range of rod-style cylinders lets users in the automotive, food and beverage, packaging and life sciences industries configure electric actuators to meet exacting application requirements.
EMERSON LINEACTUATORSELECTRICAVENTICS
Prestolite.com TURN-ASSIST 200I AND 270I Methods Machine Tools released the Turn-Assist 200i and 270i from RoboJob as its first, end-to-end standard automation system for Nakamura-Tome turning centers. A semi-collaborative system engineered for lathe automation, Turn-Assist is designed to be implemented and run by operators of any skill level. With a tablet-style HMI and standard Ethernet IP interface, shops can successfully change over from one part to another within minutes. The integrated, automatic air blow nozzle on the dual, three-jaw gripper enables the robot to discard chips and coolant away from the work holding further streamlining operations without any manual intervention. www.methodsmachine.com
UNISON PRECISE PIPE BENDING Unison Tube has assisted Morse Hydraulics in removing its reliance on external suppliers for the bending of specialist pipe fittings and reducing the volume of bent components it holds in stock. Morse Hydraulics required a pipe bending machine that would offer accuracy, repeatability and suited to a manufacturing environment specializing in one-off and small batch runs. Morse Hydraulics’ pipe bending requirements prompted Stuart Singleton, vice-president at Unison Tube LLC to recommend one of Unison’s CNC machines.
HARD HAT PAPR Miller Electric announced the Hard Hat PAPR with T94iH-R helmet, designed to improve compliance in demanding industrial environments. Made for environments that require respiratory protection and a higher level of head protection, the Hard Hat PAPR comes with an MSA V-Gard hard hat with a “V” design that deflects objects and provides added protection during the event of impact. A 44-square-inch integrated HDV grind shield provides a clear viewing area for grinding, while the lift-totalk head assembly allows the user to have access to the face without removing the head assembly.
www.millerwelds.com
tap through the material as the impact gun does its work. SpeedTaps cut out the unnecessary steps in the production process, while reducing the number of tools needed to do the job. The taps are designed with an aggressive starting pitch to catch and start cutting faster than traditional taps. This eliminates the use of hand tools like tap wrenches.
Visit for moremromagazine.com/productsindustrynewsandevents.
www.kbctools.ca
MINES Prestolite Electric introduced the IdlePro Extreme M-Series alternators that delivers protec tion against dust and particle infiltration for use in mining worksites. The new product assortment includes a variety of voltage, amps, and mounting configurations for extended flexibility and coverage in the field. The IdlePro Extreme M-Series alternators include technologies that help extend service life and increase vehicle uptime by enhancing electrical system and engine performance.
EnerSavings’ Watergater Valve can allow for saving up to 25 per cent on water bills. The valve compresses the air in the water line, making water meter readings more accurate and ensuring businesses are only paying for the water they actually use. Distributed in Canada by EnerSav ings, the Watergater Valve comes with a 10-year warranty.
www.emerson.com
enersavings.com
@MROmagazine September 2022 / MRO 29 MRO_Davley Darmex_Sept21_CSA.indd 1 2021-08-10 10:13 AM
AVAILABLEALTERNATORSM-SERIESFOR
30 MRO / September 2022 MROMAGAZINE.COM IN CONVERSATION WITH MRO Pro Tip 1 MOUNTING BEARINGS BY DOUGLAS MARTIN MRO Pro Tip 2
/AdobeBughdaryansasunPhoto:
ARE YOU A PRO?
Pros know their limits. None of us knows what we don’t know, but the smartest among us can spot when they hit their limits. Professionals don’t guess. They don’t dither when looking for solutions to problems. Delays only let things get worse. Pros have learned to recognize when they just don’t have the answers. That’s when they admit to themselves that they need help, and then ask for it. When confronted with a problem, we may attempt to fix it right away. Some times it works, sometimes it doesn’t. A failed solution is a good sign that we may need help. We ask around to see if anyone else has a solution. We may try it too. Again, it may work, it may not. If not, we are clearly beyond our own limits and we need help. Asking for help is not a weakness. Real strength is in recognizing and admitting that to ourselves and others. Pros are the heroes who solve problems using whatever resources they can muster, including the help of others. They learn and gain experience in the process. They have confronted problems, made mistakes, learned to ask for help, solved it, and moved on to the next challenge. Be a real pro - know your limits, know when to ask for help, get results.
The Podcast for MRO Professionals
The podcast features conversations with industry experts about maintenance, re liability, repair, asset management, safety and operations.Topics that are of utmost importance to MRO readers. Listen to the com/podcasts/mromagazine.here:podcastwww.
When mounting a tapered bore spherical roller bearing, the goal is to drive the bearing up the tapered journal or sleeve and stretch the in ner ring to achieve the interference fit needed to prevent the bearing from creeping (spinning) on the shaft. The amount that the inner ring is stretched can be measured in a few ways: the distance the bearing moves up the taper, the amount of angle a locknut turns from an established zero point, and the change in radial clearance (reduction of radial clear ance). measured using a feeler gauge. When you undertake such an in stallation, it is best that you choose your preferred method plus a backup method. What I typically do is to put the bearing snug on the shaft and then take initial feeler gauge mea surement and write it down. Next, give the locknut a couple taps with a spanner to seat the bearing. With a black marker, mark a starting point on the locknut and on the shaft then measure the angle back and mark the drive up angle on the nut face. I then apply the force to the span ner wrench turning the nut to the angle turn mark. Next, check the radial clearance again with my feeler gauge. Typically, I have not quite re moved the needed clearance so I will turn the nut some more to finish off theWhatreduction.isgood about marking the nut is that there is a visual representation of how far the nut needs to turn. In larger bearings, which require more force to drive into position, it is nice to see how far the finish line may be. View all the tips at code!Orcom/mr-os-tips/mromagazine.scantheQR
BY JAMES REYES-PICKNELL
