TECH
WORDS AND PHOTOS: JOHN ZAMORA
SKILL LEVEL // EASY
BETTER-HANDLING HANDLEBARS
KLOCK WERKS KLIPHANGER PULLBACK BARS
R
iders come in all shapes and sizes. When HarleyDavidson makes a motorcycle, it has to fit the greatest amount of people in the most common size. Then, aftermarket companies can come in and let the rider fine-tune the bike to fit their exact specifications. There’s nothing like those minute details that make the ride perfect for a specific person. The KlipHanger Pullback Bars from Klock Werks allow the rider to adjust the bars after being installed either closer, wider, higher, or lower easily with just four bolts. We enlisted our good friends at Wheel Works to show you how they go on.
1 p After setting the bike on a stand and protecting the tank, remove the switch housings brake
and clutch master cylinders from the bars and front gauges.
3 p Here you can see the Klock Werks bars versus the stock ones. They are roughly the same size.
58 / HOTBIKE.COM
2 p With the gauges removed you can access the four bolts that hold on the
stock bars.
4 p Remove the switch houses, fly by wire, and carefully pull out the wires.
