Sep Oct 2015 Marina World

Marina World

www.mar inawor ld.com

September/October 2015

Issue 91

Essential reading for marina and waterfront developers, planners and operators

Photo: Aaron Jilall

SF Marina has been building and installing floating breakwaters and pontoons for marinas worldwide since 1918. We are committed to finding the best solution for every site.

The beautiful Linton Bay Marina in Panama, with it’s SF Marina concrete pontoons and fingers, is one of our most recent success stories.

m

nA i s t e M s at

Meet u

9N

-1 7 1 m a d ster

!

015 2 r e b m ove

Postal address: SF Marina System AB, Propellergangen 4, 417 64 Goteborg, Sweden Telephone: + 46 31 779 07 65 e-mail: info@sfmarina.com web: www.sfmarina.com

Marina World

CONTENTS World News

7

September/October 2015 Vol. 16, No.1

17

Marina & Yard Pavilion

17

Updates on the MYP at METS 2015

Waterfront Developments

19

Community focus for One째15 Brooklyn Marina, New York

19

First marina opens at Sabah Al Ahmad Sea City, Kuwait

25

Shoreside developments in the Mediterranean

27

First phase opens at Christophe Harbour, St. Kitts

34

After the storm Ft. Pierce City Marina, Florida

38

Destination plans for RPM, Thailand

43

A-Z Guide to Pontoon & Breakwater Manufacturers

45

Products & Services

57

45

Front cover: The port of Marseille retains its old world charm despite modern waterfront developments and the fact that it has become a huge marina with 3,200 berths. Read more about waterfront developments in the Mediterranean on p. 27

www.marinaworld.com - September/October 2015

3

MORE THAN MARINAS, WE DELIVER PEACE OF MIND FOR DECADES TO COME

marinetek.net

Marina

FROM THE EDITOR

World

HEAD OFFICE MAILING ADDRESS & SUBSCRIPTION ENQUIRIES Loud & Clear Publishing Ltd, School Farm, School Road, Terrington St. John, Cambridgeshire PE14 7SJ, UK

Editor

Carol Fulford T: +44 (0) 1945 881018 F: +44 (0) 1621 855 867 Email: carolfulford@marinaworld.co.uk

Special Correspondent

Charlotte Niemiec Email: charlotte@marinaworld.co.uk

Advertisement/Commercial Director

Julia Hallam T: +44 (0)1621 855 890 F: +44 (0) 1621 855 867 Email: juliahallam@marinaworld.co.uk

Accounts Manager

Magdalena Charman T: +44 (0) 1403 733678 Email: accounts@marinaworld.co.uk

Advertisement Production

Nick Hing T: +44 (0) 1323 490384 Email: adstudio@marinaworld.co.uk

NORTH AMERICAN OFFICE

Publisher’s Representative Philippe Critot PO Box 29759, Los Angeles, CA 90029-0759, USA T: +1 323 660 5459 F: +1 323 660 6030 Email: pcritot@marinaworld.com

FRENCH OFFICE

Publisher’s Representative Catherine Métais PARIS RAI, 67 avenue André Morizet, 92100 Boulogne, France T: +33 1 46 10 47 50 F: +33 1 46 10 47 51 Email: c.metais@parisrai.com

ITALIAN OFFICE

Advertisement Representative Ediconsult Internazionale srl piazza Fontane Marose 3, 16123 Genoa, Italy T: +39 010 583 684 F: +39 010 566 578 Email: genova@ediconsult.com

CHINESE OFFICE

Publisher’s Representative Simon Ding Bridge International Holding, Rm. 401, Building A, No. 55 Jinyu Road, Minhang District. 201103 Shanghai, China T: +86 21 33231328 F: +86 21 33231366 Email: simon@chcbiz.com Marina World (ISSN 1471-5856) is published bi-monthly by Loud & Clear Publishing Ltd, School Farm, School Road, Terrington St. John, Cambridgeshire PE14 7SJ, United Kingdom.

The 2015 US annual subscription price is $160.

Airfreight and mailing in the USA by agent named Air Business Ltd, c/o Worldnet Shipping Inc., 156-15 146th Avenue, 2nd Floor, Jamaica, NY 11434, USA. Periodicals postage paid in Jamaica NY 11431.

US Postmaster: Please send address changes to MARINA WORLD, c/o Worldnet Shipping, Inc., 156-15, 146th Avenue, 2nd Floor, Jamaica, NY 11434, USA. Subscription records are maintained at Loud & Clear Publishing Ltd, School Farm, School Road, Terrington St. John, Cambridgeshire PE14 7SJ, United Kingdom.

Air Business Ltd acts as Loud & Clear Publishing’s mailing agent.

Marina World is available on subscription at the following cost: 1 year (6 issues) - £80.00 Sterling ($160) 2 years (12 issues) - £140.00 Sterling ($280) No part of this publication may be reproduced without the prior permission of Loud & Clear Publishing Ltd, the copyright owners. Upon application, permission may be freely granted to copy abstracts of articles on condition that a full reference to the source is given.

Sporting chances Building a marina on prime waterfront land in New York – one of the most famous cities in the world – is a challenge. Bringing private boaters, superyacht owners and entry level boaters into the mix is inspirational. At One°15 Brooklyn Marina (see p. 19), scheduled to open later this year, 40% of the total dock space is given over to the community for free and low cost boating programmes involving sailboats, kayaks etc.

In order to foster the next generation of boaters, family-friendly waterfront design and event-driven marina programmes are being increasingly adopted worldwide.

Marinas are keener than ever to shrug off their old dusty image as boat parks and maximise their position as centres for boating. Very few marinas lack some form of sports and social programme and many host significant and often regular boating events. This boosts revenues, pleases customers and reinforces the position of the modern marina as a waterfront destination in its own right and/or an integral part of a lifestyle oriented mixed-use water’s edge venue.

MDL Marinas, Europe’s largest privately owned marina company, is no stranger to hosting events, sponsoring young sailors and donating equipment to small sailing schools. At the other extreme, the company sponsors and promotes serious competitive sport. MDL Marinas is the official UK Marina Partner for Land Rover BAR and MDL Marina Consultancy oversaw the design and installation of the pontoons at the innovative new nerve centre in Portsmouth that is home to the British Challenger for the 35th America’s Cup. We are delighted to run this issue of Marina World with an associated MDL Supplement that focuses on the company’s core strengths of marina and estates management and marina consultancy. MDL is a respected brand name well beyond the shores of Britain and great strides have been made by managing director Eamonn Feeney and his team to further position this brand within Europe on a franchise basis.

With successful franchisees in Italy and France, and Spain soon to follow, Eamonn has completed his mission at MDL and retires from the company at the end of September. His successor will work with team members to further develop the initiative of a franchise that offers brand assurance and berth sale benefits.

We wish Eamonn a very healthy and happy future.

Carol Fulford Editor

Printed in the UK by Stephens & George

© 2015 Loud & Clear Publishing Ltd

Views expressed by individual contributors in this issue are not necessarily those of Loud & Clear Publishing Ltd. Equally, the inclusion of advertisements in this magazine does not constitute endorsement of the companies, products and services concerned by Loud & Clear Publishing Ltd. The publisher reserves the right to refuse advertising.

Marina World is the Media Partner for the Marina & Yard Pavilion (MYP) at METS, Amsterdam.

Please visit us on Stand EF02, and remember to register for free entry on www.metstrade.com

www.marinaworld.com - September/October 2015

5

No Substitute For Excellence THE WORLD’S MOST COMPREHENSIVE MARINA BUILDER

C: 0 M: 0 Y: 0 K: 70

Pantone 295 CVC

C: 0 M: 0 Y: 0 K: 100

Pantone DS 214-2 C

bellingham-marine.com

WORLD NEWS

Developers invited for Rottnest marina AUSTRALIA: Tourism Minister Kim Hames believes a new resort and marina complex at Rottnest Island off the coast of Perth, WA, will provide much safer mooring compared with existing facilities or individual anchorage and help boost the island as a visitor attraction.

Announcing the release of the resort and marina development request for Expressions of Interest on 10th August, Dr Hames invited the private sector to take an active role in a quality, sustainable development that would contribute to the island’s appeal as a destination of choice.

“West Australians will benefit from extra accommodation options on the island, especially in peak times, and boat users have expressed strong interest in additional facilities to supplement the limited number of swing moorings in selected bays on the island,” he said.

The Minister said the project is the result of extensive work completed for the Rottnest Island Authority’s management plan to guide tourism infrastructure development for the

EXPERIENCE INTEGRITY PA S S I O N VISION

island over the next five years. Its scale and diversity is expected to attract strong interest from resort hotel groups as well as marina developers and operators.

LEADERSHIP

The resort and marina are expected to provide between 100 and 150 accommodation units and around 250 berths in the Thomson Bay South precinct, which offers the marina maximum protection. Large barge loading facilities will also be included to support the delivery of supplies to the island.

The selected private sector party or consortium will be determined by the end of 2015, with construction starting as soon as environmental approvals are in place. CBRE has been appointed as the management company for the marina project.

IMBC reports strong booth sales USA: As Marina World went to press, International Marina & Boatyard Conference (IMBC) organisers reported the 2016 exhibit hall to be 70% sold.

Over 80 industry suppliers have so far signed on to participate in the show.

The 2016 event (27th-29th January) will be held in Fort Lauderdale, Florida.

Last year’s event was a record breaker in terms of attendance and more of the same is expected for 2016.

The Association of Marina Industries (AMI) is organising the exhibition, receptions for both exhibitors and attendees, seminars, workshops, keynote speakers, Best Profit Idea Awards and more.

“The 2015 IMBC content was superb, very informative and with spot on topics everyone was interested in. As the AMI’s CMM programme continues to grow we announced the designation of eight new CMMs and one new CMO,” comments AMI chairman Jeff Rose CMM. This year’s event is co-locating with the Refit International Exhibition and Conference, Professional BoatBuilder magazine’s new annual trade event created exclusively for professionals

working in the large yacht refit sector.

Refit International will feature a series of 24 technical seminars and an exhibition hall dedicated to the most appropriate products and technologies available to this unique industry. “We are delighted to have the opportunity to share space with the Refit Show and create an opportunity to connect each of our audiences and provide them with access to the broadest array of vendors and content,” says IMBC event coordinator, Kate Stanley.

Although the Refit Show and IMBC are different shows, aiming to attract different audiences, there will be opportunity for cross-show networking that leverages the similarities between the marina and refit industries.

Further information is available at www. marinaassociation.org/IMBC

www.marinaworld.com - September/October 2015

7

C: 0 M: 0 Y: 0 K: 70

Pantone 295 CVC

C: 0 M: 0 Y: 0 K: 100

Pantone DS 214-2 C

The most important marina construction decision lays beneath the surface SEAFLEX CAN HANDLE PRACTICALLY ANY TIDE, ANY WAVE, ANY DEPTH, ANY BOTTOM TYPE & HURRICANE STRENGTH FORCES.

Make a mooring decision worthy of your entire marina investment You spend a lot of time researching options for your marina build or upgrade. Since the anchoring is what is going to hold your marina investment in place it is arguably the most crucial components you will decide on. Seaflex is an elastic mooring solution that expands and retracts with each tide and wave, taking on and dampening the forces year after year. It does this while being invisible from the surface, creating some of the most modern, sleek, state of the art marinas of the world.

With 45 years of research and development Seaflex is the most technologically advanced mooring option in the world, anchoring thousands of marinas, wave attenuators and buoys worldwide.

Research your options, give your marina the mooring solution it deserves!

www.seaflex.net

SINCE 1970

|

INTERNATIONAL +46 90 160650

|

US & CANADA +1 (310) 548 9100

|

MW@SEAFLEX.NET

WORLD NEWS

Your FREE digital issue Be amongst the first to read every issue of Marina World by completing your free of charge registration online at www. marinaworld.com. You will receive automatic notification when every new issue is ‘live’.

Visit Inside Track on our website for regularly updated news on marina projects, events, awards, campaigns, partnerships – and more.

Meydan marina Barrington invests to planned

boost sail programmes

USA: Barrington Yacht Club in Barrington, Rhode Island – one of the oldest yacht clubs in the US northeast – has undergone extensive expansion. The project was implemented to help the club grow both its youth and adult sailing programmes. field and Federal Navigation Channel,” Club Commodore, David Reid explained Meeco Sullivan northeast Materne, was actively involved in regional sales manager Matt Beechinor. leading the project and was helped by “Also, the club sits at the end of the the Rhode Island Coastal Resources Tyler Point peninsula, which meant the Management Council; Harbor area to build the new club wrapped Engineering LLC for all engineering around the corner,” he added. and permitting work; Atlantic Marine Construction for pile and dock removal Plans had to consider a wide variety and replacement; and Meeco Sullivan of boats – from 40ft (12m) sport fishing for design, construction and delivery of boats to dinghies - and strong river a new customised floating dock system. current, said Harbor Engineering’s Gus

decking. These covered three distinct sections (north, mid and south) and were built as a monolithic dock system to accommodate boats from 10 to 60 ft (3m to 18m).

• a 170ft (52m) fuel dock with internal pile guides and floatation to support an enclosed office structure, fuel pumps, utilities etc.

• a 300ft (91m) long x 10ft (3m) wide dinghy dock.

• a sloping sailboat storage dock.

Kreuzkamp. “To account for all these challenges, the only way to maximise the basin area was to have the floats run parallel to the curvy shoreline.

This could not be accomplished with traditional dock construction that has true 90° angles. The floats also had to provide a wide range in specific freeboard requirements from 18in [46cm] down to 6in [15cm] in areas for dinghies and small sailboats that are stored on the docks. Meeco Sullivan did an amazing job bringing my vision for this challenging project to fruition.”

The project was complex. “The layout and overall design of the club was a challenge because of the boundary created by the shoreline, mooring

Meeco Sullivan handled all the structural and material design of the docks as well as all of the buoyancy calculations.

The project included:

• 100 new slips with ipe hardwood

www.marinaworld.com - September/October 2015

UAE: Meydan City Corporation has announced the development of Meydan One, a new 3,671,000m² (39,514,315ft²) leisure, residential and hospitality destination in the heart of Dubai.

The development will become home to more than 78,000 residents and feature the 711m (2,332ft) tall Dubai One tower, the Meydan One Mall, a civic plaza, 4km (2.4 mile) canal and 100-berth marina.

Phase One, located between Meydan and Al Khail Road, is scheduled for completion before 2020.

Unique and record breaking concepts are plentiful in the overall plan. The massive mall, for example, will feature a 150m x 80m (492ft x 262ft) retractable roof; the world’s longest indoor ski slope - at 1.2km (0.7 miles); over 5.3km (3.3 miles) of bicycle and jogging trails; and the largest dancing water fountain in the world reaching over 420m (1,377ft) in length.

Meydan chairman, Saeed Humaid Al Tayer, points out the ambitions: “In a city which never stops innovating, today’s [3rd August] announcement is significant for the future of Dubai and the UAE. We have committed to developing a multi-use destination which goes beyond expectations and will cater to every kind of person living and working here, as well as those who travel from around the world to visit.”

9

FLOATING PONTOONS

- Zero maintenance effort - Zero impact on underwater world - No lines, all forces absorbed by DualDocker arms

FLOATING STRUCTURES

- Jerk-free - One step on board - Worry-free during storms and in big swells

SAFEGUARD Y SECURE | DAMPED

YACHTS www.dualdocker.com

60 m

- No bow lines - Stable and convenient - Worry-free during storms and in big swells

Megaya

cht 10 0m

Telesc opic Pile

Single Poin Moorin t g

Requir ed conven space with tional b uoys

DualDocker BAY SOLUTION ®

What could be better than to lie at anchor in a scenic bay. Swimming, sunbathing, relaxing in a pure and peaceful environment.

DualDocker® offers you the new Bay - Solution: • universal solutions from fishing boats to mega-yachts • comfort and safety in open and unprotected bays • peaceful and safe in wind and swells • if necessary also during hurricanes • no play regardless of the water level • huge space saving opportunities • environmentally friendly

YOUR DREAMS | ECO-FRIENDLY

WORLD NEWS

Opua focuses on big boat amenities NEW ZEALAND: Work is due to start on the second stage of the Bay of Islands Marina in Opua. Local company Total Marine Services has been awarded the contract, which is expected to complete in around 18 months.

Cres completes and Slano begins CROATIA: ACI Marina Cres, located in the centre of the large but sparsely inhabited island of Cres in the northern Adriatic, has been refurbished by Croatia-based Marinetek NCP. The contract was awarded by Adriatic Croatia International Club (ACI), operator of the largest chain of marinas in the Mediterranean.

Marina owner Far North Holdings has reduced the number of new berths being built from 170 to 149 in order to accommodate an increase in the number of large catamarans making the ocean crossing to New Zealand.

“We have deliberately designed our new facilities to cater for these larger boats,” said Far North Holdings CEO Andy Nock. “Larger berths are not widely available in marinas around New Zealand so we’re aiming to catch as much of this

growing market as possible.”

“Our objective is to be flexible.

Having catamaran berths allows us to use them either for this purpose or to split them and use them for two monohull boats each. We will also now be able to offer whatever length of stay a boat owner wants, be it a day or a year,” he explained.

In addition to the new berths and marine-based infrastructure, the expanded new-look marina will feature a boardwalk frontage and a landscaped recreational area.

Marinetek spent nearly two years preparing documentation for the project, which involved dismantling seven deteriorated piers, related anchoring systems, access bridges, power stations, the water supply and hydrants. New pontoons and associated equipment were installed, together with a reconstructed breakwater pier and an additional ninth pier. Careful timing was essential as the investor wanted piers replaced one at a time to ensure that service remained uninterrupted.

ACI looked for quality products with good life cycle costs that would blend well with the natural landscape of the island. The concrete pontoons were thus teamed up with exotic hardwood decking and high end accessories such as stainless steel cleats.

Despite the renovation, the basic layout of 30 years was little changed as the marina had always benefited from wide piers with a generous basin. The external fixed pier was, however, renovated by Marinetek to provide five additional outside berths for yachts up to 50m (164ft) in length.

The marina now offers 476 new berths for a variety of vessel sizes, and Marinetek NCP managing director Boris Miškic is delighted with the result. “Over the past ten years, we have completed 72 projects and ACI Cres stands out as one of our top references,” he said. “We are truly proud to have played a part in transforming this beautiful marina and the customer has endorsed our achievement by awarding us a contract to build a brand new marina in Slano. This will be the 22nd jewel in the ACI crown.”

Dockyards pontoon ready for Cup racing BERMUDA: SF Marina Systems USA has installed the first dock system in Dockyards for the Oracle team’s support boats and racing catamarans at the America’s Cup base.

As Dockyards is one of Bermuda’s commercial ports and is subject to constant commercial activity, parts of the dock system had to be designed for removal from time to time to permit large ships to

www.marinaworld.com - September/October 2015

berth. To accommodate this, the system has been designed with large single-cast 82ft (25m) fingers moored by Seaflex.

Detachable pile guides enable the assembled sections to move in one piece.

13

Floating breakwaters 20 x 6 x 2.4 m - 130 t: the largest off the shelf Made in Italy Pontoons, breakwaters, piers for super yachts, oating bridges and constructions: the best solutions for connecting sea and land by means of strong and reliable structures, in aluminium, concrete or steel, standard or tailor made.

Gocek - Turkey: 300 m of 130 t precast modules for D-Marin Gocek

Let’s shape together your new marina

Tel. +39 0422 702412 info@ingemar.it www.ingemar.it

Pontoons and constructions over the water

WORLD NEWS

Benelux bonus BELGIUM & NETHERLANDS: In the first half of this year several significant marina and berthing projects were completed in the Benelux region by Walcon Marine and its local agent Infra Trading.

Mechelse Waterski Klub (MWK), one of Belgium’s top water ski venues, was subject to a major refurbishment project that included the construction of a new clubhouse and new Walcon berthing facilities for over 100 speedboats up to 12m (39ft) in length.

The project had its challenges as the main walkway had to fit the curvature of the lake shore. This required careful design and precise installation. Five bridges give access to the walkway and 14 15m (49ft) radius arms and locker pontoons give rigidity to the overall structure. The walkways and finger pontoons are fitted with plastic decking to give excellent grip in all weather conditions.

Work took place from February to July and the new facilities – designed

for club members and as a competition venue – opened in time for the summer holidays.

Additional projects were completed in the Netherlands. Highlights include Jachthaven de Molenwaard (above) in Hasselt, where a pier with ten finger pontoons was installed and two adjacent piers with hammerheads were refurbished. The specification included Dura Deck decking and the use of plastic floats under the finger pontoons.

At Roompot Marina in Kamperland the 218m (715ft) Pier 2 was rebuilt,

www.marinaworld.com - September/October 2015

complete with a new walkway and 16 finger pontoons, and a subsidiary walkway with 15 finger pontoons was added.

“The Benelux region continues to be an active and valued marketplace for us,” said Walcon managing director James Walters. “Marina owners there value high quality products that will give many years of service despite intensive use, and our partnership with Infra Trading remains a great success.”

15

INTERNATIONAL MARINA AND WATERFRONT CONSULTANTS

WE OWN MARINAS. WE KNOW MARINAS. OVER 40 YEARS OF PLANNING AND OPERATING AROUND THE WORLD.

PLANNING & DESIGN FOR SUPERYACHT MARINA MARINA PORT VELL, SPAIN

With over 40 years of planning and running marinas across the globe, MDL Marina Consultancy is the team to turn to for full service marina business advice.

Our marina professionals have experience across the marina business, so we have the specialist know-how to support you at every stage of the journey. We’ll work with you to extract the very best results and make your plans succeed.

The close teamwork and tailored consultancy we offer is the advantage that will deliver vibrant, profitable leisure destinations with the foundations to deliver long term results.

INTERNATIONAL MARINA AND WATERFRONT CONSULTANTS

STATEMENT OF CAPABILITY

WE OWN MARINAS. WE KNOW MARINAS.

MDLCONSULTANCY.COM

• • • • • •

BUSINESS PLANNING DESIGN PROJECT MANAGEMENT OPERATIONS BERTH SALES REDEVELOPMENT

Download our Statement of Capability

+44 (0)23 8045 7155

to your mobile device by scanning this QR code.

MDLCONSULTANCY.COM

CONSULTANCY@MDLMARINAS.COM

MARINA & YARD PAVILION MYP Exhibitors 2015 As of 10th August, the following companies are registered to exhibit in the MYP at METS. The list includes first-time exhibitors (red) and companies who are new to the MYP but not new to METS (green):

The MYP at METS 17th-19th November 2015

The 2015 line-up and the 2016 preview...

The Marina & Yard Pavilion (MYP) at METS will be buzzing this year with a broad range of international marina equipment and materials suppliers; a concurrent programme of live and virtual marina-specific presentations on The Marina & Yard Stage; and the official launch party for the 2016 ICOMIA Marinas Conference (WMC).

Don’t miss Waterfront Drinks at the Waterfront Café in the heart of the pavilion on Wednesday 18th November (16.30 to 18.00hrs) where you can join RAI Amsterdam, the ICOMIA Marinas Group, the Holland marine industry association HISWA and Marina World for complimentary drinks and the chance to catch up with colleagues, make new contacts and toast the success of next year’s WMC event. To be held in Amsterdam during the latter part of the METS week, WMC 2016 will be a magnet for marina professionals who will travel from all over the globe for a double dose of ‘MYP + WMC’ networking. Plans and ideas will be shared!

WMC is no stranger to Amsterdam –

but it’s been a while, as HISWA director Geert Dijks confirms. “The first ICOMIA WMC was held here in 1993, reflecting the fact that watersports has its origins in our country,” he says. “The first pleasure craft were built by the Dutch in the 1600s and the first marinas and yacht clubs were opened in Holland.

The Netherlands is now one of the most developed watersports countries in the world. It has the highest density of marinas and marine companies within a 100km [62 mile] radius and an impressive variety of watersports, infrastructure, waterways and related facilities. We will be delighted to welcome the WMC back to Holland next year.”

HISWA will also host a special Marina Symposium on the final day of METS 2015. The programme (which is largely in the Dutch language) will be unveiled later this month (September).

While the ICOMIA Marinas Group continues to hone the programme for WMC 2016, the more immediate focus is on the MYP for this year. Longstanding exhibitors, first-timers and a few long-term METS exhibitors who have decided to relocate to the MYP

www.marinaworld.com - September/October 2015

Alto Service Italia Clement Germany Click&Go Den Hartog Industries DualDocker Dura Composites Dutch Blue Marine Ecotank INMARE IRM Ingemar Inter Boat Marinas Intermarine JLD International LeeStrom Lock&Charge Magic-Float Marcello Giampiccolo Maricer Marina World Marine Travelift Marinetek Group Martini Alfredo Mecanorem Metalu Industries International Moffatt & Nichol N V Arabel Nautipark Polyway Poralu Marine Rolec Services Rollins Marine Services Rototec SF Marina System Seaflex Soprefa Walcon Marine We Trade International join forces to provide a professional showcase of the latest marina products.

Exhibitor enquiries are still being processed but the latest listing (above) was confirmed as Marina World went to press. We’re set fair for another great event.

Marina World is the official media partner for the MYP at METS and for WMC 2016.

17

Creating the world’s finest yachting destinations with help from the world’s most respected yachting brand

Intelligent marina design

Operational excellence

Sales and marketing effectiveness

– – – – – –

– – – – – –

– – – – – –

Feasibility and design Capital costing Business planning Project management Operational handover Sales and marketing strategy

Commissioning Recruitment and training Turnkey management 1782 Club membership Financial management Performance monitoring

Brand affiliation Tariff structuring Global marketing reach World-class marketing platform Yachting industry partnerships Networking and events

For support with boutique marinas to large scale resort developments, please contact: Dan Hughes | +44 (0) 203 405 3223 | dan.hughes@cnmarinas.com | www.cnmarinas.com

WATERFRONT DEVELOPMENTS up 40% of the total dock space, the aim of which is to encourage young people to take up boating,” Greg Weykamp, principal of Edgewater Resources tells Marina World. Edgewater, in partnership with SUTL Group/One°15 Marina of Singapore, is the design consultant and developer with a 30 year concession. One°15 is heavily involved in all aspects of the project but with emphasis on the future Harbor Club operations. The marina will incorporate One°15 branding.

Community watersports in the heart of NY City Boating in New York Harbor is set to be more accessible than ever when a stylish new boating facility opens later this year. One°15 Brooklyn Marina will directly connect Brooklyn to the water and provide opportunities for people of all ages, incomes and abilities to enjoy time afloat.

Community access

Located within the heart of Brooklyn’s resurgent waterfront between Piers 4 and 5, the marina will be part of the award winning Brooklyn Bridge Park, an expanse of lush green community space on the Brooklyn side of the East River in New York City. It will enjoy stunning views of the Manhattan skyline.

The marina also incorporates a wide range of sustainable technologies to make it one of the ‘greenest’ marinas in the world: solar panels are to provide energy for club facilities; specially textured concrete panels used to create habitat; and floating wetlands added to boost the health of local ecosystems.

The One°15 Brooklyn Marina site (above) is located between Piers 4 and 5 in Brooklyn Bridge Park. Its position within New York Harbor is highlighted (right).

• A large fleet of centrally owned, high quality, professionally maintained cutting edge sailboats.

• A recreational sailing club tailored to New York Harbor and Brooklyn Bridge Park which can be accessed by members of the public at reasonable cost.

• Spaces for kayaks and kayaking instruction, including a protected beginner basin.

• Small boat sailing programmes in a protected basin for children to learn to sail.

• Access for existing community and non-profit boating programmes to New York Harbor.

• A top quality sailing school with world class instruction and curriculum design.

• Potential for other clubs, such as fishing or motor boating clubs, in the future.

Photo: Philippe Lemay, Poralu Marine

The project includes 125 slips ranging from 40ft (12m) to 100ft (30.5m) on a floating Poralu dock system protected by a Marinetek floating wave attenuator that also provides alongside mooring for superyachts up to 250ft (76m) will also be provided. A sailing club and Harbor Club will provide first class amenities for tenants.

One°15 Brooklyn Marina takes just a small sliver of the 85 acres (34.3ha) of reclaimed land that now forms the park.

It is anticipated, however, to become one of the revenue generators that will maintain the whole site and also boost community facilities.

“We won the contract because the mission was to give water access to the community – and that mission is also our mission. A huge public dock takes

Two per cent of the marina’s revenues will be contributed to supporting free and low cost community boating, as well as providing a worldclass community dock facility around which these programmes can thrive.

Various community partners will share the slip space, which will include:

www.marinaworld.com - September/October 2015

19

ST U N N I N G

WATERFRONT DEVELOPMENTS

WITH THE

SUPERIOR TOUCH

Birkenhead Point, Sydney

Design led innovation.

- Super Elite on water.

- Edge II on land.

+61 7 5594 8200

info@superiorjetties.com

superiorjetties.com

WATERFRONT DEVELOPMENTS Artist’s impression of the marina basin (left) and community dock (below).

Breakwaters were required, says Weykamp, to protect the docks from wake created by water taxis. Marinetek North America is using two different systems to build the outer dock. “For the most exposed sections of the marina, we are using our 5300BRK floating concrete breakwater system.

This system is 17ft 4in (5.3m) wide, 6ft (1.8m) high and each dock section is 53ft (16m) or 65ft (19.9m) long. The 65ft (19.9m) units each weigh 52.4 tons,” explains Marinetek’s Bob Berry.

“The system has twin keels on the bottom, which provide additional wave attenuation and add mass and stability to the dock.”

Building the marina When complete, One°15 Brooklyn Marina will likely increase the number of slips in New York City by 25% and will create the calmest marina basin in New York Harbor.

Due to its location within an existing $315 million park, emphasis is on well appointed docks as opposed to lavish immediate landside development and all slips will have water, electricity and Wi-Fi. Sanitary pump-out facilities are also incorporated. A dockmaster’s office provides for on-site marina management, and toilets and showers give slip holders essential amenities.

Docks will have gated access and 24-hour security. An historic yacht will be home to the Harbor Club and an additional club with spa, restaurants and event spaces, will be built upland.

According to Weykamp, the biggest challenge from a developer’s perspective was obtaining permits in such a high profile, environmentally sensitive location. Sometimes the environmental issues impacted on design factors, although not always negatively. One solution that led to a positive environmental outcome was the decision to use Seaflex moorings for both floating pontoons and floating breakwaters. “The subway runs underneath the entire site so no piles were possible,” Weykamp explains.

“But using Seaflex also meant less damage to the seabed.” Rémy Benois, sales and business development for Poralu Marine, Inc, augments this.

“We are anchoring our pontoons using Seaflex to meet all the highly technical challenges of the site. Edgewater

Resources was looking for a marina that seamlessly integrated into the surrounding landscape but also had to be storm resistant and designed to sustain significant storm events such as Hurricane Sandy.”

Poralu is installing its standard aluminium docks with new brown colour Ecostyle polypropylene decking to create the 125-slip marina system.

According to Benois, this met the technical and specific aesthetic standards Weykamp was seeking from an architect’s perspective. Key factors were: the company’s knowhow; the flexibility and modularity of its dock system for use in a brand new marina; and the long life expectancy and very minimal maintenance of the equipment required over time. The marina is ADA accessible and due to its wave attenuation system has a calm environment.

www.marinaworld.com - September/October 2015

The 3800BR floating concrete system is being used for the less exposed breakwater sections. These units measure 12ft 6in (3.8m) wide x 4ft (1.2m) high and are 53ft (16m) or 65ft (19.9m) long. The longest units weigh 39.2 tons. They have a flat bottom as this provides effective and stable attenuation in more sheltered positions.

The docks will be joined together using a maintenance-free, flexible, silent connection system designed for rough water environments and fitted with composite fendering to give a modern appearance. A Seaflex mooring system will run up through the bottom of the dock in a cast-inplace flared tube which feeds to a top-access connection box. “This keeps all anchoring rope and hardware out of sight and out of harm’s way, and provides a very secure and effective anchoring method,” Berry says. “We

21

Mega Yacht Powerpoint

POWER

to Trust

Lighthouse Power Pedestal One of our most popular units, the allpurpose Lighthouse pedestal has a wide range of features.

Lighthouse-SS Power Pedestal The Lighthouse-SS offers the same features and options as the standard Lighthouse, but is made with high quality stainless steel for superior durability and performance.

Eaton Marina Power & Lighting 1-800-723-8009 www.marinapower.com

From the company that is known for its high quality innovations, Eaton is the only company to offer a self-contained dual-phase megayacht unit.

The Complete Solution All Eaton Marina Power & Lighting power pedestals and distribution equipment is UL listed. The UL certification provides industry leading level of product safety your customers demand and the peace of mind you expect from Eaton. In business for over 100 years, Eaton provides everything your marina needs for a safe, reliable and efficient electrical power system. Eaton offers a complete electrical solution including: •

Full electrical design services

•

Single source for electrical equipment

•

Eaton branded and trusted components

•

Installation through Eaton’s Certified Contractor Network

•

Local supply through our distributor network

•

Superior customer service before, during, and after purchase

Admiral-SS Power Pedestal Truly the flagship of our unitized pedestal line, the Admiral-SS possesses amperage capabilities and receptacles to serve nearly any size Mega Yacht.

WATERFRONT DEVELOPMENTS have used this system with Seaflex on hundreds of installations all over the world.” The dock system requires minimal maintenance and is designed to have a 50 year life.

All slips have water and electricity via pedestals supplied by Virginia-based Marina Electrical Equipment (MEE).

MEE will install its Harbor Light SS – a stand-alone stainless steel unit. Each pedestal contains electrical receptacles and circuit breakers, electronic metering, water connections and LED lighting. “The units will also have pivoting faceplate technology (patent pending) for ease of maintenance,” confirms MEE’s Chris Dolan.

Provision has also been made for the superyacht docks. MEE has custom designed stainless steel GTX superyacht units and GTX substations.

“The superyacht units include high efficiency torodial transformers, which will allow the facility to save a substantial amount of money in installation costs,” Dolan explains.

“By providing units with integral transformers on the docks, the facility can use much smaller wire (or cable)

to power the units. Smaller cables cost less money than larger cables, saving the customer money.”

Marinetek breakwater sections arriving on site.

The substations also contain torodial transformers and panels to supply electricity to the power pedestals on the docks. Again, there is the benefit of reduced cabling costs.

August, Greg Weykamp confirmed that Marinetek was installing the breakwater units and that Poralu was poised to install the marina docks as rapidly as possible when the breakwaters are in place.

As Marina World went to press in late

ƐƚƌŽŶŐ ƉĂƌƚŶĞƌ

Pontoons, breakwaters, fingers and accessories for marinas Q Quality – performance – design Q Secure and safe year after year

YƵĂůŝƚLJ ŝŶ ƚŚĞ ŚĂƌďŽƌ

ƚĞƌƐ͕ ĨŝŶŐĞƌƐ ĂŶĚ ĂĐĐĞƐƐŽƌŝĞƐ ĨŽƌ ŵĂƌŝŶĂ

ĞƌĨŽƌŵĂŶĐĞ ʹ ĚĞƐŝŐŶ͘ Pontech AB ƐĂĨĞ LJĞĂƌ ĂĨƚĞƌ LJĞĂƌ͘ Box 2037 S-103 11

Stockholm Sweden

ƉŚŽŶĞ ͲŵĂŝů

ϴ ϰϬϯ Ϭϱ ϵϬϬ www.marinaworld.com ŝŶĨŽΛƉŽŶƚĞĐŚ͘ƐĞ

Telephone +46 8 403 05 900

E-mail info@pontech.se

Internet www.pontech.se

/ŶƚĞƌŶĞƚ

ǁǁǁ͘ƉŽŶƚĞĐŚ͘ƐĞ - September/October 2015

23

SETTING THE STANDARD FOR BOAT HANDLING EQUIPMENT

Versatile hydraulic trailers Hydraulically expanding width frame Full frame lift for easy lift and set Complete suite of options available Factory pricing on all equipment sales

WATERFRONT DEVELOPMENTS The huge extent of the Sabah Al Ahmad Sea City project is particularly noticeable when seen from the air.

marine piling companies, La’ala Al Kuwait converted one of its barges to receive a crane, bought the appropriate piling equipment and installed an average of eight piles per day with great precision and vertical accuracy.

First marina opens at Sea City Kuwait property developer La’ala Al Kuwait now has its first marina at the massive 4,700ha (11,614 acre) Sabah Al Ahmad Sea City project in the south of Kuwait.

The 408 berth marina has been 18 months in construction and is the first of four marinas, either under construction or at advanced planning stage, offering new berths to the Kuwait market.

The marina is the largest in Kuwait and will receive craft from 10m to 40m (33ft to 131ft) in length. As Kuwait is the largest boating market in the GCC countries, the Sea City marinas will provide a much needed facility and assist in stimulating boat sales in a country where registered boat numbers exceed berth availability by a factor of ten.

A combination of Ingemar design and endorsement and the construction know-how of La’ala Al Kuwait enabled the latter to develop a facility that produces up to 28 concrete pontoons per week to cover a surface area of 800m² (8,600ft²); an amazing feat for a company with no history of marina construction. Furthermore, due to the difficulty of procuring satisfactory

The level of service provided to the boat owners is of the highest level and includes: water and power to every berth, from 32 amp single phase up to 250 amp three phase; in-berth pump-out for 30% of berths; seven fuel dispensers including very high speed diesel supply; and RFID actuated security gates and pedestals.

All of the electrical, water, sanitary and emergency installation has been designed and supplied by UK-based Rollins Marine.

The well attended bumper opening ceremony featured traditional Kuwait dancing, children’s entertainment and an exhibition area outlining the history and construction of the project and its marinas. All was topped off with an impressive flurry of fireworks. The ceremonial knocking of the traditional Kuwaiti Bab (gate) was carried out by the Minister of State for Housing Affairs, Yasser Hassan Abul.

La’ala al Kuwait claims to have been inundated by boat owners interested in acquiring berths in the marina, which is located close to favoured fishing grounds and the coral islands of the south of Kuwait.

Sea City’s 5 star marina is totally constructed from concrete pontoons; attenuators, walkway units and all fingers, providing amazing stability and facilitating access to all berths via golf buggies. Recognising the challenges of constructing an all-concrete marina in the desert, La’ala Al Kuwait collaborated with Ingemar of Italy in the design and construction of the 225,000m² (269,000yd²) marina and its 17,000m² (20.331yd²) floating units.

Marina systems in place for the first of four planned marinas.

The marina has 408 berths.

www.marinaworld.com - September/October 2015

25

WATERFRONT DEVELOPMENTS of tourists who are linked to bigger yachts thus elevating the project and its impact on the local economy.

The widespread tendency to try to hold on to the biggest yachts for the longest period of time often leads to ad hoc projects at marinas or renovation of existing mooring space. If well protected from the waves and equipped with superyacht docks, able to offer specific services and with a good local set up for owners and crew, an attractive well placed marina can elevate the entire development.

Around the Med

Highlights and challenges in the Mediterranean

From east to west, shoreside development in the Mediterranean shows interesting improvements, with common basic elements complemented by many different features. Donatella Zucca cites examples and talks to experts for their opinions on how best to incorporate marinas in such projects.

Whether designed in tandem For many years, towns and with, or integral to, a waterfront cities have been rediscovering development, or added at a later date, their shorelines. Whether on salt the marina is generally in keeping with or fresh water, the waterfront has the architectural, tourist and social been revolutionised in terms of message that the developers want to urban development. Harbour areas, put across. This means that the marina abandoned industrial complexes often benefits from green spaces, and other neglected sites have been easier access and a range of services transformed thanks to government, and facilities that complement or extend local authorities and driven individuals what it can offer. And a waterfront with who have planned new public spaces of international visibility generates a flow great appeal and sound resource.

Due to the variety of functions and activities they create on the new-style waterfront, developments help enhance city centres and often become the key attraction and reinvigorate the local economy. Specific characteristics vary according to the type of urban centre and the need perhaps to emphasise specific historic or cultural elements.

But, thanks to its climate and tourism, the Mediterranean almost always incorporates a marina in any waterfront redesign. It is often in fact the focal point when creating a new identity for the area and the flagship image at national and international level.

Porto Montenegro (above) has been subject to various development phases and Palmarina Bodrum (right) in Turkey is now an established waterfront hub.

www.marinaworld.com - September/October 2015

In Turkey, interest in the potential for waterfronts began back in 2000 with the construction of roads and creation of green areas on reclaimed land in port areas of major cities. In Istanbul, the KadikĂśy Square Haydarpasa-Harem Urban Design Competition took place in 2000/2001 and Galeta Port was privatised in a 30 year management contract secured by Dogus Group Holding for US$702 million.

Yalikavak, an ancient city that is the fishing port of Bodrum, built on its already successful tourism industry by creating the superyacht marina Palmarina Bodrum. Purchased in 2011 and rebuilt by the Palmali Group, it is one of the newest superyacht marinas in Turkey with mooring for 710 boats and year-round appeal. Aside from the cultural lures of the historic Roman site of Ephesus, the marina has access to high profile shops, a renowned Nobu restaurant (the first in Turkey), Cipriani and the Billionaire’s Club.

Another beautiful example is Limassol Marina in the heart of the city of Limassol in Cyprus. Aside from

27

WATERFRONT DEVELOPMENTS Expert view Sean Purdy, marketing manager Camper & Nicholsons Marinas Q: Do you think that shoreside developments influence marina development?

Limassol Marina in Cyprus is central to a high profile shoreside development. being the first full service marina for superyachts on the southern coast of the island, it is central to a high profile shoreside development at a renovated waterfront. The marina has changed the face of the city, with its 650 berths for yachts and superyachts up to 110m (360ft), an integrated resort, over 160 apartments (80% sold) and 74 villas with berths or beach access.

The marina is managed by Camper & Nicholsons Marinas (C&NM) in partnership with Francoudi & Stephanou Marinas.

Another example of synergy between marina and waterfront can be found at Porto Montenegro in the Bay of Kotor, Montenegro.

Established as a superyacht marina in 2009, it has been subject to various development phases designed by UK-based Marina Projects.

“We’ve been involved in Porto Montenegro since 2006 and we are now approaching completion of phase two,” confirms managing director, Mike Ward. “The ‘blank canvas’ provided by the site was a significant advantage but the commercial nature of the existing landside areas demanded a comprehensive redevelopment.

Being involved from the outset has enabled us to integrate all of the marina’s elements with the mixeduse shoreside development.”

“Limassol Marina has had a transformational effect on the city waterfront,” says C&NM’s Sean Purdy. “Architecturally it complements the historic port city, extending its reach beyond the original harbour boundary with the creation of islands and peninsulas protected by a 1km (0.6 mile) outer The stylish OneOcean Club restaurant terrace breakwater.” is one of many upscale highlights at Marina Port Vell, Barcelona.

A: A shoreside development with a marina needs to be designed collectively to consider how the two will work together. They must be sympathetic to each other so the layout and styling of shoreside architecture complements what’s newly built on the water and what’s already there on the land. This starts with the overall masterplan, strongly informed by the market for which the development will serve. This usually ranges from the local community to international visitors, yacht and property owners of nearby towns and cities.

Q: What are the positive and negative effects?

A: If it’s done right, there are really only positive effects. Yacht owners have a safe, secure home for their boat, with ready access to the sea and to the leisure and cultural attractions available ashore. Local residents get to enjoy a fun and bustling waterfront, and the economy benefits from increased revenue and employment as new businesses are created to service the new yachting centre. If the development is poorly conceived and executed, it’s a different story. Problems with access will reduce footfall, insufficient protection from wind and waves will discourage berth holders and visiting yachts, and unsympathetic architecture can be an eyesore in a beautiful setting. However, if the project is undertaken with a full understanding of the operational, commercial and cultural drivers, these pitfalls are avoidable.

Q: Does your involvement in these projects limit the design of a new marina or the improvement of an existing facility?

A: There are several key factors that constrain a marina’s design. First and most obvious are the physical conditions it must withstand - from wind, waves, tide, current, heat and cold. If it is a virgin site then it’s possible to choose the marina’s location and start with a ‘blank sheet of paper’.

But if it’s a redevelopment or a new facility within an existing harbour, then the design needs to work within those constraints.

This narrowing of the options can actually prompt some of the most imaginative and creative design and engineering solutions.

www.marinaworld.com - September/October 2015

29

WATERFRONT DEVELOPMENTS Expert view Mike Ward, managing director, Marina Projects Q: Do you think that shoreside developments influence marina development?

A: Absolutely! The connection to the landside is vitally important in planning the marina and it is one of the areas that we pay close attention to at the concept design and feasibility stage.

There are both constraints and opportunities to take into account, all of which will influence the design solution, the nature of the marina offer and, ultimately, the customer base using the marina. By paying close attention to these matters early on in the design process, it is possible to establish what is achievable at a given location.

Q: What are the positive and negative effects?

A: Positives - features of interest on the land, such as an historic waterfront, bars, restaurants or other local amenities will increase the attraction for visitors and long term berth holders. The marina and waterfront will have appeal for boat owners and the local population. The economic benefit is much better understood these days. Employment opportunities are created during construction and through the operating stage. Negatives - in the case of a waterfront revitalisation, the marina design must carefully consider the connections between the marina and local infrastructure in terms of public access, vehicular movement, parking demands etc., to ensure that berthing for superyachts especially doesn’t have a dominating visual impact on local architecture. Moreover, in many cases, the marina requires an upgrade of water and energy supplies.

Q: Does your involvement in these projects limit the design of a new marina or the improvement of an existing facility?

A: The constraints of a particular location can put limits on the design of a new marina, the redevelopment of existing facilities or an increase to infrastructures. However, more and more commercial sites are being converted to leisure use. In Montenegro we are engaged in Porto Montenegro and Portonovi projects, former military facilities that with this change in use can accommodate significant evolutions. The commercial nature of the hinterland is not appealing for a marina and this provides the opportunity for resort type developments.

30

Moving further west to Monaco, we discover another modern icon – Port Hercules marina and its associated Monte Carlo waterfront.

The marina has, quite simply, transformed the principality into the most famous yachting destination in the world. Another (smaller) marina forms part of the master plan just revealed for an artificial peninsula.

Designed by Le Portier, the peninsula will extend 6ha (15 acres) into the sea.

In Marseille, France, synergy was uppermost in mind when redeveloping the old port and nearby Euroméditerranée waterfront.

The project has elevated the area in terms of tourism and cultural interest by honouring local and Mediterranean history. The result is in harmony with the environment despite the audacious architecture of the Museum of Civilization and the fact that the port has become a mega marina with 3,200 berths. Maxiyacht berths are managed by private companies and the municipality.

When seeking an historic site, it is hard to beat the Cottonera waterfront in Malta, home to the C&NM-managed Grand Harbour Marina. “It was a redevelopment of Dockyard Creek, once home to Nelson’s navy,” Purdy explains.

“Bordered by the sixteenth century bastions of Fort St Angelo and very ancient fortifications, the geometry of the harbour was fixed. The task was to renovate the waterfront and install a modern marina that respected the historic surroundings.”

A very different approach was taken in Barcelona, Spain, at

Grand Harbour Marina in Malta is a modern marina on a renovated waterfront that deeply respects its magnificent historic surroundings.

Marina Port Vell; the pearl of Barceloneta – a part of the city that was transformed from industrial and fishing zones to an upscale waterfront for the Olympic Games.

Now it is home to cultural sights, Barceloneta Beach and the trendy Rambla del Mar pedestrian street.

With Blue Flag certification since 2003 and a host of other green credentials, Port Vell has 148 berths, many of which are for superyachts. It can accommodate a vessel length up to a staggering 190m (623ft) and benefits from good on-site services and the facilities of the entire seafront.

Further superyacht essentials include the MB92 yards, specialists in repair, refit and maintenance for 20 years and amongst the largest superyacht facilities in the world at 76,000m² (818ft²) and 2,000 tonne and 4,000 tonne Syncrolifts. It is not unreasonable that people bet on Barcelona as the number one megayacht destination in the world.

Despite the increasingly high level of prestigious marinas, the uniquely rich features offered by the Mediterranean and its wealth of history, there is a sting for future developers as Mike Ward explains: “In every part of the world there are constraints and opportunities when developing on the coastline and the nature of these varies from location to location. The Mediterranean presents its own challenge to find suitable opportunities in a location that will sustain a marina business.”

www.marinaworld.com - September/October 2015

17�18�19 NOVEMBER RAI AMSTERDAM THE NETHERLANDS

THE WORLD’S

LARGEST

MARINE EQUIPMENT TRADE SHOW

MEET THE WORLD IN AMSTERDAM The METSTRADE show is the world’s largest marine equipment

SUPERYACHT PAVILION

trade show and the only truly international B2B exhibition. With excellent networking opportunities, a broad range of showcased innovations and located in one of the most beautiful cities in the world, the METSTRADE show is an unmissable event for every

MARINA & YARD PAVILION

professional in the marine industry.

1,350+ exhibitors 21,000+ visitors 100+ nationalities The METSTRADE show is the flagship event of METSTRADE, the world’s leading platform for professionals in the marine equipment industry.

POWERED BY

MEMBER OF

OFFICIAL MAGAZINE

SYP OFFICIAL MAGAZINE

MYP OFFICIAL MAGAZINE

ORGANISED BY

on the water and everywhere EUROPA I AMERICAS I MIDDLE EAST I ASIA I AUSTRALIA

Cap d’Agde, Mediterranean Sea - shining a light on biodiversity.

Poralu Marine takes care of its environment.

More than 8,000 references over 5 continents

MANUFACTUR ER OF P O NTOONS A ND MAR INA E QU I P M E NT

" Poralu Marine leads the way in environmental matters" Projects involving the fragile natural habitats which make up the shores of the Mediterranean Sea, and where the impact of port facilities on the flora and fauna must be managed, demand unflagging commitment from those concerned.

More than 10 years ago, our port of Cap d’Agde committed itself to a policy of environmentally responsible behaviour with a view to respecting the future port environment. Since we care about our environment, we like to play an active role in improving biodiversity and boosting the resident fauna in harbours. The port of Cap d’Agde is one of the pilot ports in the Nappex project (this innovative ecological engineering project is part of France’s national strategy for biodiversity). Nature deserves our respect, and we expect Poralu Marine, as our partner, to behave responsibly.

The innovations made by Poralu Marine, such as the circular shapes in the Ecostyle® decking, allow light to reach the seabed and thereby protect the original natural environment. The various materials used can also be recycled.

Aware of its responsibility to the environment, Poralu Marine is our partner in innovation and has been coming up with solutions which take into account man’s impact on the Mediterranean environment for nearly 30 years.

Pierre WEISS Port Manager at Cap d’Agde

www.poralu.com

MW2015SepOct.indd 33

05/09/2015 14:12:09

WATERFRONT DEVELOPMENTS

Luxury yachting in the Leeward Islands Since 2008, the Christophe Harbour development on the southeast peninsula of St. Kitts has been steadily growing, adding world-class amenities and attracting international visitors to a quiet corner of the Caribbean. Earlier this year, the first phase of the development’s centrepiece marina opened for business, marking the completion of one of the largest infrastructure projects undertaken in the region in years. Through targeted design and uncompromising attention to detail, the Marina at Christophe Harbour is redefining the standard for luxury yachting in the Leeward Islands. Justin Davis reports St. Kitts is located in the centre of the popular West Indian cruising circuit that includes premier destinations such as St. Maarten, St. Barths and Antigua.

With breathtaking vistas of volcanic hills and crystal clear blue water, the island offers a wide variety of natural, cultural, culinary and recreational experiences to rival any destination in the greater Caribbean basin.

Christophe Harbour is an exclusive residential resort community that covers more than 2,500 acres (1,011ha) on the southeast peninsula of St. Kitts. The development features luxury residential home sites, five-star restaurants, bars and an exclusive members-only club. The Caribbean’s first Park Hyatt hotel is under construction within the development and will include an 18hole Tom Fazio golf course, which is scheduled for construction in the near future.

The master developer of the resort is the Christophe Harbour Development Company (CHDC) and the founder of the company, Buddy Darby, is an avid yachtsman. His vision for the community has been greatly influenced by his love of the water, as witnessed through the realisation of the world-class megayacht marina and its place as a cornerstone of the entire development. “We like to say this is a ‘superyacht marina built by a superyacht owner and managed by superyacht captains’,” he says. “It’s true, of course, as we approached the design, engineering and construction of the dock with superyachts in mind. Every detail has been considered and the end result

34

MW2015SepOct.indd 34

is a state-of-the-art facility for the boat and a seamless experience for owners, charter guests, captain and crew.”

The Marina Village will be a core amenity and activity centre for the Christophe Harbour community. When constructed, it will feature unique dining opportunities, boutique shopping experiences and open public spaces hosting local events and concerts. The marina village is purposefully designed to attract boaters, non-boaters, visitors and residents alike by incorporating touches of local culture and architecture into the fully modernised facilities. By remaining true to the heritage of the island and taking cues from local architecture, the Marina Village at Christophe Harbour will offer an experience that is both novel and authentic. Phase 1 of the Marina Village will be under construction later this year.

300ft (91.4m) on the outer docks.

A 32,000ft² (2,972m²) fixed concrete pier with 16ft (4.8m) wide main walkways and 12ft (3.65m) wide finger piers provide ample Justin Davis room for golf-cart and pedestrian traffic, while a deck that is located 5.5ft (1.67m) off the water easily accommodates the higher freeboard of larger yachts. Each slip is fitted with dedicated, state-of-the-art marina utilities including 200A or 400A shore Phase one slips installed at Christophe Harbour (above) on the beautiful southeast peninsula of St. Kitts (below).

Targeted design Applied Technology & Management, Inc. (ATM), a renowned engineering firm based in Florida, USA, was responsible for leading the design of the first phase of the marina. ATM called upon its specialist experience in megayacht facility planning to ensure that the marina is properly outfitted to accommodate the particular needs of large luxury yachts.

The 24 slips in the first phase of construction range from 150ft to 220ft (45.7m to 67m) with the capacity to berth vessels up to

www.marinaworld.com - September/October 2015

05/09/2015 14:12:14

C

M

Y

CM

MY

CY

CMY

K

MW2015SepOct.indd 35

05/09/2015 14:12:15

WATERFRONT DEVELOPMENTS As this CGI shows, with boats in place and the shoreside development completed, Christophe Harbour will be stunning by night. Phase one of the marina village will be under construction later this year. and cost. Once the evaluation process was completed, a US contractor, American Bridge (AB), was selected to construct the marina. AB had the equipment, personnel and experience required to meet the demanding quality standards while maintaining an aggressive project schedule. power, high-speed in-slip fuelling (up to 150 gallons/min), high-pressure potable water, in-slip pump-out and modern high-speed communications (cable and Wi-Fi).

In addition to this advanced infrastructure, all of the marina elements adhere to very specific aesthetic requirements. The marina is inspired by classic Mediterranean ports, modernised through the use of monolithic elements, smooth lines and a minimalistic approach to the design of dock accessories. The fuel, pump-out and potable water hydrants are located below the deck in flushmounted, custom-built stainless steel hatches. The power pedestals, designed and fabricated by Marina Electrical Equipment, are also custombuilt to maintain a low profile, standing only 32in (0.8m) above the deck. This allows lines of sight across the marina to remain unbroken, drawing focus to the yachts rather than the utilities and other fixtures on the dock.

The upland marina offerings and services have been tailored specifically to megayacht owners and crew as well. The marina staff are uniformed and professionally trained, and complimentary concierge service ensures that patrons’ needs are met, vessels are easily provisioned and crew are properly accommodated. The marina also has an advanced security system and 24/7 onsite security personnel and is pending certification by the International Ship and Port Facility Security Code (ISPS). It will be one of the only ISPS certified facilities in the region, providing a designated port of entry with streamlined Customs

36

MW2015SepOct.indd 36

and Immigration services. This will allow guests to spend more time enjoying the island and less time dealing with cumbersome customs procedures.

Serious challenges The marina’s first phase of development faced formidable challenges. One of the greatest trials that had to be overcome was the onset of the global economic recession in 2007/2008. Prior to the recession, the marina was to include over 300 slips of various sizes in a single phase. Due to the financial downturn, the plans for the marina had to be revamped to include phasing in line with the new economic climate.

CHDC also took specific measures to ensure that construction could begin immediately when the timing was right.

Throughout the recession, ATM and CHDC worked to maintain dredging and land reclamation operations, modify and finalise marina plans and specifications, and keep potential contractors abreast of the project’s status. In late 2013, when the economy was on the rise and the construction of the marina was justified, the project was competitively bid to a host of marine contractors from around the world. Construction began in early 2014 and the marina was opened with great fanfare in February of this year.

To ensure that the demanding technical and aesthetic requirements were met, detailed specifications and design parameters were established

by ATM and the other members of the design team during the bidding process.

Numerous bids were received and assessed based upon qualifications

The remote location of the project posed logistical challenges as well. AB utilised its global network of suppliers to ensure that materials arrived on time at an efficient cost. Precast structural elements were manufactured in Virginia, USA and shipped over 2,000 miles (3,218km) to St. Kitts; steel pipe piles were fabricated in China and procured through a US-based supplier; and basic construction equipment, such as cranes and pile drivers, had to be mobilised from abroad due to the limited availability of equipment on the island. AB also brought in experienced expatriates to complement the local workforce, ensuring that the work was completed on time while adhering to the highest quality standards.

Realising a vision The Marina at Christophe Harbour has been designed to be the heart and soul of the Christophe Harbour community.

It is a manifestation of CHDC’s vision for the yachting-oriented development, and hints at the scale and grandeur of that vision. Through dedicated efforts by all of the project team members and an unwavering commitment to maintaining the highest standards for all aspects of the project, the Marina at Christophe Harbour is redefining the standards by which Caribbean megayacht facilities are judged and has paved the way for the continued rise of St. Kitts as a premier destination in the Caribbean.

Justin Davis, PE, MBA is a project engineer and marina development specialist for Applied Technology & Management, Inc., Florida, USA. He can be reached via e-mail at jdavis@appliedtm.com.

www.marinaworld.com - September/October 2015

05/09/2015 14:12:18

MW2015SepOct.indd 37

05/09/2015 14:12:19

Photo: Eric Hasert

WATERFRONT DEVELOPMENTS

Building to survive a hurricane

by Robert Wilkes

Ft. Pierce on the Treasure Coast of Florida is a gateway to the Gulf Stream and some of the best sailfish fishing in the world. Ft. Pierce owns and operates City Marina in the Indian River, the central channel of the Intracoastal Waterway. The marina has two moorages: an inner marina of 108 slips with fixed-dock berths and a new, state-of-the-art floating-dock outer marina with 137 slips accommodating yachts from 40 to 140ft (12 to 43m).

annual list of hurricane names.

Florida was battered by Charley, Frances, Jeanne and Ivan. Jeanne was strongest, but the knockout punch that destroyed the City Marina on the night of 4th/5th September 2004 was Frances.

Hurricanes typically pass over in five hours but Frances battered Ft. Pierce for 34 hours and held the marina in its high-velocity grip near the eye of the storm as gusts reached 108mph (173km/h).

Before the hurricane, City Marina staff did all they could to protect the marina and its tenants, including adding more lines to each boat. Conditions were so violent that boats broke loose of their moorings.

Incredibly, the marina remained intact for 28 hours. Then, as the hurricane finally began to move, the wind direction changed abruptly. The result was a powerful 20ft (6m) storm surge.

The marina survived the winds but not the storm surge and, of the 97 boats in the marina, 96 were lost.

The lone survivor, a trawler named Shameless, was blown offshore and

Ft. Pierce is a convenient favourite of many boating and fishing enthusiasts.

Gulf Stream fishing grounds are typically 60 miles (95km) from Florida harbours, but City Marina requires just 12 to 20 miles (19 to 30km) of motoring before lines are in the water. The Florida Turnpike and nearby airports easily connect boaters to Ft. Pierce.

Hurricanes and the Treasure Coast On the night of 30th July 1715, a twelve-ship Spanish treasure fleet departed Cuba bound for Spain. A powerful storm scattered the ships along the Florida coast. Eleven ships foundered and sank. Spanish coins and artefacts are still found, sometimes washing up on Florida beaches.

Fast forward nearly 300 years to 2004. There were so many hurricanes the weather service exhausted its

38

MW2015SepOct.indd 38

www.marinaworld.com - September/October 2015

05/09/2015 14:12:24

WATERFRONT DEVELOPMENTS somehow dropped its anchor. The owner put in the key and drove it away.

Recovering from the devastation Boating and tourism are important to the city’s economy. City Marina paid for itself and the surplus helped to fund civic improvements. When City leaders surveyed the damage they knew the marina would be rebuilt, but they wanted a survivable marina to replace it. They turned to City engineers and asked, “What do we need to do?” The responsibility fell on the shoulders of Ed Seissiger, project coordinator in the City’s engineering department.

It was a challenge that would require imagination and persistence. What followed was a ten-year campaign of engineering, permitting and project financing that Seissiger relentlessly championed.

The exposed outer marina This article describes the construction of the outer marina and its floating docks, wave attenuators and barrier islands. The inner marina is cut into the shoreline and is sheltered. It was also damaged, but its fixed docks were soon repaired to keep the marina in business. The outer marina is exposed to a long fetch from the southeast. As the hurricanes proved, the location needed a dramatic engineering solution. Seissiger and his team considered their options.

“We wanted to do something beyond typical shoreline hardening,” Seissiger said. “We looked at breakwater walls and even a giant jetty projecting out

The new exposed outer marina with concrete docks (as below left), are sheltered by a barrier island solution. from the shore. But the most intriguing solution was to create one or more man-made islands. Islands and lagoons create excellent habitat for birds, dune vegetation and provide artificial reefs for juvenile fish and shellfish.” The City hired the engineering firm Tetra Tech of Stuart, Florida, to develop engineering studies. In 2005, Tetra Tech presented eleven designs with cost-benefit analyses.

Funding and Permitting The Federal Emergency Management Agency (FEMA) offered to supplement the $6.5 million the City had from insurance proceeds to rebuild the marina but insisted that City find a way to protect its investment. They warned Ft. Pierce that if the new marina was destroyed in a storm they would not get another loan. Bids for replacing the marina came in at $11 million and island construction at $11.5 million. With permitting, engineering and materials acquisition, the project cost $31 million.

Seissiger and team met with the state and federal elected officials and persuaded them to back the barrier island solution. In 2007 the Florida Department of Environmental Protection,

www.marinaworld.com - September/October 2015

MW2015SepOct.indd 39

the Florida Governor and Board of Trustees (entrusted with oversight over state land) also approved the plan. The Army Corps of Engineers would not begin their approval process until the state had finished theirs, so the process essentially had to start over adding two years to the project. The Corps gave their approval in 2009.

Engineering studies Engineers studied weather, topography and other factors to estimate the worst wind and wave the new marina would have to withstand. Seissiger involved three different engineering firms through peer reviews. “Their estimates for the highest design wave came within onetenth of an inch of each other,” he said.

The rules had changed. When the previous marina was built, Florida allowed operators to order boats out of the harbour before a hurricane. After Hurricane Andrew in 1992, marina operators could no longer tell tenants to leave. Docks and pilings would have to withstand the sail-area pressure of more than 100 boats bearing on the structure. They decided to engineer the new marina to survive Category 3 hurricanes with boats in the marina and Category 4 storms without.

Testing the island design FEMA provided a grant to build a 1/40 scale model in laboratory conditions.

“The test was done at Queens University in Kingston, Canada,”

39

05/09/2015 14:12:25

WATERFRONT DEVELOPMENTS Generously proportioned docks and gangways were manufactured and installed

by Bellingham Marine.

Seissiger said, “in a tank 120ft by 60ft (36m by 18m)). We studied tidal scouring and evaluated each concept against the criteria. Through conceptual planning, computer modelling and physical testing, we went through 25 designs.”

The system consists of twelve islands and a peninsula covering 13 acres (5.2ha). The largest, Tern Island, is 10 acres (4ha). Tern Island features seven T-groins to dissipate wave energy.

T-groins are built of limestone stones weighing 4,000 to 7,000lbs (1,814 to 3,175kg). The eleven smaller islands use 1,200 to 2,500lb (544 to 1,133kg) stones. 93,000 tons of lime rock was mined 50 miles (80.4km) from the marina. In addition, the islands required 120,000 cu yd (91,746 cu m) of sand held in place by large sand-filled geotextile tubes. These were stacked pyramid form then backfilled to raise Tern Island 10ft (3m) above the lagoon.

The islands took two years to build.

The new marina and wave attenuators The request for proposals came down to four companies. “We awarded the project to Bellingham Marine because their proposal best met our design criteria,” Seissiger said. FEMA rules provide only like-for-like replacement, but the northern entrance channel had to be dredged every year. A new, safer entrance channel was created which allowed L Dock to be reconfigured with 17 new slips, including the capacity to

40

MW2015SepOct.indd 40

moor boats up to 43m (140ft). A, B and C Docks were replaced unchanged.

The two 53in (1.35m) draft floating wave attenuators are designed to reduce a 2ft (0.6m) chop to 6in (15cm) in blustery weather. Docks and wave attenuators are waler-connected.

Walers on the wave attenuators are reinforced by ½ in (1.25cm) T-bars of drilled and galvanised steel joined to the glue laminated timbers for additional stability.

Bellingham Marine was the general contractor. The company manufactured and installed the floating docks, installed the gangways and completed electrical and plumbing work in-house.

Pile driving was subcontracted to Hal Jones, and Lucas Marine Acquisition Company did the island work.

“Docks and pilings were manufactured in our Jacksonville plant and transported by barge to the site,” said Kevin Thomson, general manager southeast division of Bellingham Marine. “No road transportation was needed so the marina operated normally during construction. We monitored the nearby manatee habitat and stopped construction when manatees were in the area.”

“Bellingham Marine gave us the project we wanted,” said Seissiger, “not the project they thought we wanted.

We felt they were listening to us. They stayed by our side during the long design process and made adjustments as needed based on our comfort level.”

A boon to the environment The island system has allowed Ft. Pierce to create several new habitats.

Thirty-foot (9.1m) HDPE “mattresses” filled with oyster cultch (shell-like material) were installed to recruit oysters. These have generated over 1.2 acres (0.48ha) of new oyster beds. Several acres of sea grass were planted to attract juvenile fish.

Mangrove pods were planted and new mangroves are taking hold. The barrier islands provide more than two acres (0.8ha) of coastal dune habitat. Tern Island is a seasonal nesting ground for the least tern and refuge to ospreys, seagulls and pelicans. Over six acres (2.4ha) of new artificial reefs are showing signs of both hard and soft coral recruitment.

Robert Wilkes writes about the marina industry from his home in Bellevue, Washington, USA.

www.marinaworld.com - September/October 2015

05/09/2015 14:12:28

We create chemistry that lets shorelines love nature’s forces

Elastocoast® by BASF protects shorelines against challenging conditions. From inland waterways to coastal marinas, Elastocoast’s highly porous, monolithic design creates a strong and durable structure – all while being ecologically compatible. Tested by nature, Elastocoast is a proven solution to protect new or existing revetments.

Learn more about how Elastocoast by BASF is re-defining shoreline protection at elastocoast@basf.com

MW2015SepOct.indd 41

05/09/2015 14:12:29

For almost 70 years, Moffatt & Nichol has provided innovative solutions to the maritime industry.

With a portfolio of over 100,000 berths worldwide, we know what makes a marina successful. ! Feasibility Studies ! Concept & Detailed Design ! Masterplanning ! Financial Modelling ! Facility Audit & Appraisals ! Project Management & Commissioning ! Operational Management Solutions

info@moffattnichol.com www.moffattnichol.com Creative People, Practical Solutions.ÂŽ

ANOTHER EXCITING NEW YACHT HARBOUR BY WALCON...

C2

C8 C9

C3

C10

C

C7

C11

C1

C12

C13

A A7

B

A6

B1

BW2

A8

A9

A5

A10

BW1

A4

A3

A2

A1

:DOFRQ 0DULQH /WG +HDG 2IĂ€FH

Cockerell Close, Segensworth West, Fareham, Hampshire PO15 5SR T: +44 (0) 1489 579977 F: +44 (0) 1489 579988 E: sales@walconmarine.com

www.walconmarine.com

MW2015SepOct.indd 42

Walcon Marine Benelux T: +31 (0) 38 385 9559 E: info@walconmarinebenelux.com www.walconmarinebenelux.com

Walcon Marine Croatia T: +385 21 645 960 E: john.nash@st.t-com.hr www.marinafacilitysolutions.com

Walcon Marine Australia Pty Ltd West Coast Operations T: +61 (0) 8 9583 3982 E: enquiries@walconmarineaustralia.com.au www.walconmarineaustralia.com.au

Walcon Marine Australia Pty Ltd East Coast Operations T: +61 (0) 7 5546 2178 E: andygoss@walconmarineaustralia.com.au www.walconmarineaustralia.com.au

05/09/2015 14:12:30

WATERFRONT DEVELOPMENTS

RPM to become upscale lifestyle destination Royal Phuket Marina (RPM) has committed to a 5 billion Baht (US$150 million) five-year investment to further develop its facilities as a comprehensive waterfront destination. a modern low-rise Royal Phuket chairman Gulu Lalvani, condominium called La explains: “Under our DestinationRPM Reserve. A total of 160 campaign, Royal Phuket Marina will units in eight four-storey become a destination in its own right buildings located near the – a thriving residential and business town square will all benefit community, and a destination that will from a private sky pool. support Phuket tourism, attracting visitors from around the world.”

The RPM Children’s Zone is to be developed by a design and operating The investment will be in four main team with over 15 years of experience areas: hotel development; residential in setting up and operating children’s property; marina expansion; and the clubs around the world. It will comprise RPM Children’s Zone. play areas, climbing frames, a purposeOver 600 rooms are planned. A key built jungle gym, slides, ball pits and design hotel – a joint venture with an swings, and will be for children up to experienced Thai hotelier – will have eight years old. Parents will be able 129 rooms, and a second 500-room to count on professional child-care hotel aimed at families will feature a services with safe and professional theme pool and private beach. supervisory care while they enjoy all Having identified the need for quality the facilities of the marina. serviced apartments in Phuket, the  As noted in the July/August issue property development will comprise

 

The RPM team at the project launch. of Marina World, the marina will be expanded with a 250-boat drystack.

Lalvani is convinced that the investment meets market demands.

“Phuket’s visitor demographics have changed considerably over the last ten years. More tourists are looking to the east coast and to new destinations,” he asserts. “Approximately 1,000 tourists and residents use the marina’s facilities every day. Our marine leisure facilities and central location make Royal Phuket Marina the gateway to more than 30 islands all within a one hour boat ride.”

   



RRANT Y WA





SIM P

ON TI

SIM P

ARRANTY W

ON TI

INSTALLA LE





INSTALLA LE

LOW

INTENA MA N

LO W

E NC

CE INTENA MA

LIP SURFA IS

AN T

CE

CE

AN T

   

LIP SURFA IS

AVY DUTY HE



   



   



   

AVY DUTY HE

   

 







www.marinaworld.com - September/October 2015

MW2015SepOct.indd 43



43

05/09/2015 14:12:31

MW2015SepOct.indd 44

05/09/2015 14:12:32

A-Z GUIDE TO PONTOON/BREAKWATER MANUFACTURERS AIRFLOAT, East Sussex, UK E: info@airfloatmps.com Airfloat modular pontoons are an ideal solution for temporary or permanent docks, bridges, work platforms and breakwaters. EirGlide is also available for drive-on storage of jet skis, RIBS and other small craft. Airfloat’s 700mm x 700mm blocks are rotationally moulded for strength and durability and have been tried and tested in extreme weather conditions for many years.

AL MANZEL HOUSEBOATS & MARINAS, Umm Al Quwain, UAE E: marina@almanzel.net Al Manzel Houseboats & Marinas is a builder of aluminium pontoons, gangways, houseboats, workboats, breakwaters, slipways and other related marine products.

AQUATECH, Kitzbuehel, Austria E: aquatech@a1.net The Maritime Technic pontoon system from Aquatech is a third generation modular floating dock system designed for aquatic sports, aquaculture and environmental protection. The product represents quality at a reasonable price and is manufactured in the EU. Blocks can be connected to create any layout arrangement and can also be used to replace or extend existing pontoon systems.

ARNAVING, Thuir, France E: jcb@arnaving.fr The Mobi-Deck system, developed

by Arnaving, allows for a 30 to 40% increase in marina capacity for boats up to 50 feet in length. The revolutionary design uses one single fairway for several rows of mooring pontoons to make all commercial floating pontoons, including breakwaters, mobile.

ATLANTIC MARINE, Fontenay le Comte, France E: contact@atlanticmarine.fr Atlantic Marine is an established leading designer and builder of marinas with worldwide references in over 15 countries. It enjoys a strong presence in Asia, French West Indies and the Middle East. In addition to its standard pontoon range, the company supplies floating sanitary and office buildings, service pontoons and a breakwater pontoon using a concretefloat design.

Porto Montenegro, Tivat, Montenegro. Pontoons and breakwaters: Ingemar

BALTIC FLOATING STRUCTURES, Riga, Latvia E: rostislav@balticfs.eu BalticFS is a leading designer and builder of floating refuelling solutions. It is also expert in the design and turnkey production of floating buildings and other structures (villas, restaurants, offices, swimming pools, sports facilities etc) on heavy-duty concrete pontoons, and architectural and design projects. It provides a full range of services related to hydro-dynamic research and analysis for the creation of wave-protected water areas.

BELLINGHAM MARINE, Washington, USA E: bmi@bellingham-marine.com Bellingham Marine is a worldwide marina and waterfront design/ build construction company with manufacturing facilities around the globe. The company is a leader in floating pontoon design specialising in floating dock systems, platforms and wave attenuators. Bellingham’s products can be seen around the world in diverse sites – from iconic harbours to public boat launches.

(See advertisements p. 6 & p. 7)

BLUEWATER MARINE & DOCK SPECIALTIES, Hawaii, USA E: info@bluewaterdocks.com Bluewater Marine offers structurally engineered aluminium framed floating docks, fixed piers, gangways and other marina components and accessories.

All systems are specifically designed to withstand harsh tropical environments.

www.marinaworld.com - September/October 2015

MW2015SepOct.indd 45

CANDOCK, Quebec, Canada E: candock@candock.com Candock specialises in modular floating systems with high resistance to harsh weather conditions. A 20 year warranty is offered, and features include a patented channel system for service lines, integrated LED lighting system and drive-on docking for boats and PWC. The system is ideal for marinas of all sizes and for boats up to 15m. No heavy machinery is required for installation and no complicated anchoring systems are needed.

Immediate shipping.

CONNECT-A-DOCK, Iowa, USA E: intlsales@connectadock.com Connect-A-Dock’s 6ft x 10ft FS2120 floating dock section is ideal for both commercial and residential dock applications. The company’s systems can meet virtually any requirements and versatile modular sections can be used to create many different shapes and sizes with little effort. Various accessories are available.

CUBISYSTEM, Portbail, France E: contact@cubisystem.com Cubisystem offers a maintenance-free modular pontoon system that is claimed to be versatile, easy to use, durable, reliable and safe. The pontoons suit a wide range of applications including marinas, harbours and aquaculture centres and are in use offshore, by river authorities and for public works.

Ideal for events, systems are available for sale or for hire, made in France and certified to ISO 9001.

45

05/09/2015 14:12:33

A-Z GUIDE Båtforening Stenungsund, Stenungsund, Sweden. Pontoons: Pontech

INTERNATIONAL MARINE FLOATATION SYSTEMS, British Columbia, Canada E: imfs@floatingstructures.com IMFS is a global leader and innovator in the design, engineering and manufacturing of floating concrete platforms for marinas, breakwaters, floating homes, yacht enclosures (boatsheds), commercial structures and specialty floats and pontoons.

JETFLOAT INTERNATIONAL, Salzburg, Austria

EZ DOCK, Missouri, USA E: john.saunders@playpower.com EZ Dock is a world leading manufacturer of floating modular dock systems that can be assembled in many configurations to suit commercial and residential needs. Also available is the EZ Launch for kayaks and canoes, which allows accessibility for people with disabilities on an easy-to-use transfer bench.

GOLDEN MANUFACTURING, Florida, USA E: sales@goldenboatlifts.com Golden Manufacturing, Inc produces, markets and supplies custom aluminium floating docks, fixed docks and gangways throughout the world.

Its products include a line of standard duty residential and heavy duty commercial docks. All are custom designed and built to site-specific needs with the customer’s budget given high priority.

INTER BOAT MARINAS, Puttershoek, Netherlands E: info@interboatmarinas.nl Inter Boat Marinas, founded in 1986, is a specialist in the design, development, manufacture and installation of floating pontoons and marinas, complete with all necessary facilities. The company offers a variety of floating pontoon and concrete breakwater options.

INTERMARINE, Hampshire, UK E: pontoons@intermarine.co.uk Intermarine is an industry leading provider of innovative mooring solutions for use in multiple applications. Its partnership with the Marinetek Group has further increased its market presence overseas. The partnership also adds heavy concrete pontoons, breakwaters and floating buildings to the available solutions it offers from its base in the UK.

E: office@jetfloat-international.com The original manufacturer of quality floating modular pontoon systems, Jetfloat manufactures in Austria using top quality (genuine Lupolen 5261Z) material. The company prides itself on offering top technical solutions, a wide range of accessories, superior service and reliable, swift delivery.

KIE-CON, California, USA E: joe.hernandez@kiecon.com Kie-Con works closely with Canadian company International Marine Floatation Systems (see separate entry). IMFS has developed innovations such as the Danbuoy connection system that eliminate the use of structural wood whalers in the KieCon float system. Kie-Con marinas and wave attenuators are designed and engineered to withstand weather conditions specific to site.

CSU Marina 1, Como, Italy. Pontoons: Martini Alfredo

INGEMAR GROUP, Milan, Italy E: info@ingemar.it Ingemar has been building floating concrete structures since 1979.

Modular all-concrete pontoons and floating elements with galvanised steel or aluminium frames are offered with hardwood decking, fibre reinforced concrete or rotomoulded polyethylene floats. The group also builds floating breakwater elements up to 20 x 6m.

Tailor-made solutions and turnkey projects are Ingemar’s strong points in the Mediterranean and Gulf regions.

(See advertisement p. 14)

46

MW2015SepOct.indd 46

www.marinaworld.com - September/October 2015

05/09/2015 14:12:35

Suppliers & Services March 2015 - February 2016

Suppliers & Services March 2015 - February 2016

Marina Marina

World www.marinaworld.com World www.marinaworld.com Suppliers & Services

From 15th October visit www.marinaworld.com to complete your free company editorial entry 2016 – February 2016 2017 March 2015 - February

Suppliers & Services

March 2015 - February 2016

Essential reference for marina and waterfront developers, planners and operators

Contact juliahallam@marinaworld.co.uk for advertising options

Essential reference for marina and waterfront developers, planners and operators

MW2015SepOct.indd 47

05/09/2015 14:12:36

Hazelett Marine

+++++

BLUE STAR MARINA

+ + + + +

Conservation Elastic Mooring Systems For Yachts and Docks www.bluestarmarina.org

The transparent certification system indicating the quality level of marinas 速

INTERNATIONAL MARINE CERTIFICATION INSTITUTE

www.hazelettmarine.com 135 West Lakeshore Drive, PO Box 600 Colchester, Vermont 05446-0600 EMAIL: info@hazelettmarine.com TELEPHONE: (802) 863-6376 FAX: (802) 863-1523

MW2015SepOct.indd 48

05/09/2015 14:12:38

A-Z GUIDE KROPF INDUSTRIAL, Ontario, Canada E: jordan@kropfindustrial.com Kropf Industrial supplies highly stable and durable steel pipe floating docks for freshwater marinas. Its rugged system is proven in northern ice conditions and is built to order to meet exact requirements with numerous options available. The company also supplies floating breakwaters, hydraulic boat handling equipment and boat storage stands.

(See advertisement p. 24)

LIVART MARINE, Guangdong, China E: livart@livartmarina.com Livart Marine has over 10 years of experience as a floating pontoon designer and manufacturer and has its own factories and design team.

One-stop premium floating solutions are offered using high quality products at reasonable prices. The company’s patented aluminium system meets TYHA and AU standards.

MAJESTIC MARINE ENGINEERING, Fujairah, UAE E: jbokaris@majesticjetties.ae Majestic Marine Engineering is a specialised marine contracting company established in the 1980s.

With 300 staff and a modern pontoon production plant, Majestic has manufactured and installed over 5,000 berths for projects ranging from fishing ports to high profile megayacht marinas. It has also completed various extensive marine works contracts in the GCC.

MARICORP US, Missouri, USA E: melanie.ashby@mcus.com Maricorp US is a marina industry leader providing manufacture and installation of full service marina systems. Its products include steel truss frame docks, pneumatic boat lifts and modular docks. The company offers an industry warranty which it describes as ‘unsurpassed’.

MARINA HARBOUR SYSTEMS, Ontario, Canada E: marinaharboursystems@gmail. com MHS offers advanced floating docks, break walls and gangways in four standard and several hybrid versions, featuring resilient aluminium alloys

YMCA Lakeside, Lake Windermere, UK. Breakwater: Orsta Breakwater with high mechanical properties; choice of decking; UVA resistant composite materials. Design life is in excess of 40 years. Modules offer maximum versatility in terms of berth configuration, load bearing and noisefree operation. Benefits include long term performance, low maintenance, ease of assembly and impressive connectivity.

MARINA VENTURES LTD USA, Maryland, USA E: info@marinaventures.com As one of the world leaders in the development, design and construction of marinas, Marina Ventures Ltd USA is solely focused on designing and constructing the finest marinas.

Established in 1961, it has successfully completed well over 800 projects on five continents.

MARINE DESIGNS, Cornwall, UK E: drystan@marinedesigns.co.uk Marine Designs is a turnkey supplier of breakwater pontoons. It manufactures the DockMaster concrete pontoon, which is built to BS 6349 Maritime Structures Code and has a 50 year design life. Advantages include flexible and rapid build using pre-cast concrete beams and polystyrene. Pontoon widths of 4 to 12m are offered with 1m plus freeboard for commercial vessels and superyachts.

Kobe Marina, Kobe, Japan. Pontoons: Ravens Marine

www.marinaworld.com - September/October 2015

MW2015SepOct.indd 49

49

05/09/2015 14:12:39

YO U R S U P P L I E R F O R M A R I N E A N D C I V I L I N D U S T R I E S

K ndaDek

JLD Anchor

COMPOSITE & FIBREGLASS MARINE DECKING

THE BEST ECOLOGICAL MOORING SOLUTIONS TO SECURE PONTOONS, BUOYS, MOORINGS AND OTHER FLOATING STRUCTURES

MW2015SepOct.indd 50

Tel: +31 (0)299 622 396 The Netherlands info@JLDinternational.com www.JLDinternational.com

I N T E R N AT I O N A L

05/09/2015 14:12:40

A-Z GUIDE and wave loads. Gangways, piers and bridges are also available.

ORSTA BREAKWATER, Heusden, the Netherlands

Photo: Florian Groehn

E: info@breakwater.eu Orsta Marina Systems designs, supplies and installs floating breakwaters, large concrete pontoons and marina equipment for both leisure and commercial harbours. It builds concrete pontoons of 2.4m to 7.0m in width and specialises in ‘on site’ production. The company can build pontoons and breakwaters wherever they are needed.

(See advertisement p. 56)

PMS, Izmir, Turkey MARINETEK, Helsinki, Finland E: info@marinetek.net Marinetek is a market leader in Europe and has built more than 2,000 marinas in 40 countries across the world. The company has concrete float production units in 12 locations in Europe, Asia and the USA. Marinetek also designs and supplies floating solutions such as swimming arenas, playgrounds, utility buildings, club houses and floating homes.

(See advertisement p. 4)

MARTINI ALFREDO, Turate, Italy E: martini@martinialfredo.it Martini Alfredo produces galvanised steel framed floating pontoons fitted with polyolefin resin injected moulded floats. A wide range of sizes, displacements and capacities is offered. The Martini Marinas floating pontoon system is easy to assemble and requires very little maintenance.

Access gangways, adjustable fingers, floating breakwaters, mooring systems, service pedestals and all main marina accessories complete the catalogue.

(See advertisement p. 28)

Birkenhead Point Marina, Sydney Harbour, Australia. Pontoons: Superior Jetties

METALU MARINAS, Saint Brevin Les Pins, France E: info@metalu.com Metalu designs, manufactures and installs a wide range of floating and fixed aluminium pontoons and access bridges. The company has over 35 years of experience and has worldwide references.

NORTHWEST DOCKS, Washington, USA E: nwdocks@gmail.com Northwest Docks is Washington State’s leading manufacturer of welded, aluminium-framed docks. The company has been building marinas, commercial docks and large residential dock projects in Washington, Oregon and British Columbia since 2004 and has a new 25,000ft² factory. Docks meet and exceed permitting requirements for environmental impacts, ADA and wind

E: cagdas.agirtas@pms.com.tr Utilising its 22 years of experience with the design and construction of modular floating platforms, PMS launched the Marine Dock system in 2010 in order to meet global demands for marina systems. Experienced engineers utilise 3D designs for projects prior to the manufacture of systems suitable for wide ranging vessel sizes including megayachts.

PACIFIC PONTOON & PIER, Queensland, Australia E: pacificpp@pacificpontoon.com Pacific Pontoon & Pier (PPP) is one of the largest builders of marinas in Australia and has been providing world-class marinas for over 25 years.

Founder, Bill Bourke, and the PPP team developed a product range that they claim has revolutionised marina construction, supplying a low-maintenance, high density and aesthetically pleasing marina product.

Colchester Harbour Marina, Essex County, Canada. Pontoons: Kropf Industrial

MEECO SULLIVAN, Oklahoma, USA E: intsales@meecosullivan.com Meeco Sullivan has over 107 years of experience designing and building saltwater and freshwater marinas, floating dock systems and wave attenuators. It manufactures high quality, time-tested, storm-proven floating dock systems constructed on timber, galvanised steel or aluminium with a variety of hardwood, concrete or composite decking materials.

www.marinaworld.com - September/October 2015

MW2015SepOct.indd 51

51

05/09/2015 14:12:43

TOTAL CONTROL OF MARINA

at your fingertips

SEE YOU AT METS 2015 MYP.63

marinamanagementsoftwaresolutions marinamanagemen

IMPROVE CUSTOMER SERVICE TO CREATE ADDED VALUE

IN YOUR LANGUAGE Visit our website

www.marinamaster.si

Since 2002, the world’s only A – Z of marina management & operation. Used in 16 countries.

Edition 4 totally re-edited and re-formatted. Ultra clear and easy to use.

Use of The Marina Manual will save you hundreds of hours of management time and/or hundreds of thousands of dollars in management fees.

See Downloads at www.marina-manual.com

MW2015SepOct.indd 52

05/09/2015 14:12:45

A-Z GUIDE RAVENS MARINE, Florida, USA E: matt@ravensmarine.com Ravens Marine has produced world class commercial and residential floating docks for over 40 years.

Systems are low maintenance and durable, with no rotting or rusting, and are ideal for salt or fresh water applications. The company offers several decking styles and aluminium or plastic floatation for every application.

(See advertisement p. 26)

SF MARINA SYSTEM AB, Gothenburg, Sweden

PIER GENIUS, IOWA, USA E: sales@piergenius.com The Pier Genius patented ‘Anti-Sway’ tube frame system provides marinas with an ultimate docking system.

It is claimed to be stronger than conventional truss frame docks and includes patented features such as the PG pipe lock conduit system and nylon 50-year decking.

POLYDOCK PRODUCTS, Minnesota, USA E: info@polydockproducts.com PolyDock Products offers a wide selection of easy to install and easy to own modular floating dock sections and drive-on PWC platforms. The products are perfect for new marinas and for adding transient and permanent slips or rental space at existing waterfront properties.

Prince Philip Yacht Haven, Hampshire, UK. Pontoons: Walcon Marine

PORALU, Port, France E: contact@poralu.com Poralu Marine has been designing, manufacturing and installing top of the range pontoons and marina systems worldwide for over 35 years.

The company can meet all customer requests by providing functional and long lasting equipment that is attractive and environmentally friendly.

With experience of 8,000+ projects covering five continents, Poralu’s strategy of innovation and sustainable development has made it a recognised expert in the marketplace.

(See advertisement p. 32 & 33)

E: info@sfmarina.se SF Marina’s modular systems encompass concrete floating breakwaters and pontoons, commercial and leisure boat marinas, pontoons for handicap access to water and boats, pontoons for boat clubs, fuelling pontoons, fish farming systems, floating bridges, support structures for floating buildings, commuter boat docks, seaplane and helicopter landing platforms and floating ferry landings.

(See advertisement p. 2)

STRUCTURMARINE, Quebec, Canada E: infoweb@structurmarine.com Structurmarine’s ‘out of the box design’, advanced marine engineering standards, structural expertise and pontoon anchoring methods, have significantly contributed to the survival of its marina systems in extreme weather conditions. Systems have survived Typhoon Neoguri in Okinawa, Hurricane Arthur in America, a strong cross equatorial swell combined with equinox tide in Panama and Shamal winds in the Persian Gulf.

PONTECH, Stockholm, Sweden E: info@pontech.se Pontech manufactures and sells floating marinas, floating piers, breakwaters and accessories. With a sharp focus on quality, safety and ensuring satisfied customers, the company claims to be a standardsetter in the industry.

(See advertisement p.23) Akker Brygge Marina, Oslo, Norway.

Pontoons: Marinetek

www.marinaworld.com - September/October 2015

MW2015SepOct.indd 53

53

05/09/2015 14:12:47

walk on water Customised, World Class Marina Decking Solutions

World Class Port Coogee Marina Australia Built with Permastruct Micro Mesh Decking

Perma Composites™; pacesetters in innovative design and manufacture of low maintenance, premium decking solutions.

Contact today for a bespoke solution.

The Composite Experts™ +61 8 9303 2406 info@permacomposites.com www.permacomposites.com

DĂƌŝŶĂƐ ĂŶĚ ŽĂƚLJĂƌĚƐ ͲͲ ^ŝŵƉůŝĨLJ zŽƵƌ ƵƐŝŶĞƐƐ DĂƌŝŶĂƐ ĂŶĚ ŽĂƚLJĂƌĚƐ ^ŝŵƉůŝĨLJ zŽƵƌ ƵƐŝŶĞƐƐ

^ĞůĞĐƚ 3DFVRIW ^ĞůĞĐƚ 3DFVRIW1* 1* 1*

zŽƵƌ ďƵƐŝŶĞƐƐ ŵĂŶĂŐĞŵĞŶƚ ƐŽŌǁĂƌĞ ƐLJƐƚĞŵ zŽƵƌ ďƵƐŝŶĞƐƐ ŵĂŶĂŐĞŵĞŶƚ ƐŽŌǁĂƌĞ ƐLJƐƚĞŵ x Marina & Rental Management x xx KĐĐƵƉĂŶĐLJ Θ ZĞǀĞŶƵĞ ZĞƉŽƌƟŶŐ xx Haul Out Yard Management xx Boatyard Management xx Integrated Accounts Receivable & Accounts Payable

ZZZ 3DFVRIWPPV FRP

x /ŶƚĞŐƌĂƟŽŶ ǁŝƚŚ LJŽƵƌ Financial System

x Visual Marina & Boatyard Maps x >ĞĂƐŝŶŐ ͬ KǁŶĞƌƐŚŝƉ DĂŶĂŐĞŵĞŶƚ x ^ŚŝƉ ^ŚŽƉ WŽŝŶƚ ŽĨ ^ĂůĞ WƌŽŐƌĂŵ x ϯƌĚ WĂƌƚLJ ^LJƐƚĞŵƐ Θ &Θ /ŶƚĞƌĨĂĐĞƐ

x ůƵď DĞŵďĞƌƐŚŝƉ DĂŶĂŐĞŵĞŶƚ x ^ĞĐƵƌŝƚLJ 'ĂƚĞ ^LJƐƚĞŵ /ŶƚĞƌĨĂĐĞ x hƟůŝƚLJ DĞƚĞƌ /ŶƚĞƌĨĂĐĞƐ x ϯƌĚ WĂƌƚLJ ^LJƐƚĞŵƐ Θ &Θ /ŶƚĞƌĨĂĐĞƐ x DƵůƟ >ĂŶŐƵĂŐĞ hƐĞƌ /ŶƚĞƌĨĂĐĞ

3DFVRIW1*

/ŶƐƚĂůůĞĚ ŝŶ ŽǀĞƌ ϮϬ ĐŽƵŶƚƌŝĞƐ ĂƌŽƵŶĚ ƚŚĞ ǁŽƌůĚ͕ ŽƵƌ ĞdžƉĞƌŝĞŶĐĞ ŝƐ ƚƌƵůLJ ŐůŽďĂů WůĞĂƐĞ ǀŝƐŝƚ ǁǁǁ͘ƉĂĐƐŽŌŵŵƐ͘ĐŽŵ ƚŽ ĮŶĚ LJŽƵƌ ůŽĐĂů WĂĐƐŽŌ WĂƌƚŶĞƌ

MW2015SepOct.indd 54

05/09/2015 14:12:52

A-Z GUIDE WAHOO DOCKS , Georgia, USA E: scott@wahoodocks.com The Wahoo Wave is a completely selfcontained wave attenuation system that provides highly effective wave dampening at a fraction of the cost of competitive systems. The product requires no winch adjustments, works in harsh conditions and has a mass similar to or more than that of comparable concrete attenuators.

Photo: Aaron Jilall

WALCON MARINE, Hampshire, UK

Linton Bay Marina, Panama.

Pontoons: SF Marina

SUPERIOR JETTIES, Queensland, Australia E: info@superiorjetties.com Superior provides design-led solutions for recreational marinas using sustainable aluminium and concrete systems. A range of rotomoulded industrial flotation is also available.

Domestic pontoons and commercial marinas are custom designed and delivered through the group network with manufacturing throughout the Asia Pacific region.

(See advertisement p. 20)

VERSADOCK INTERNATIONAL, Hampshire, UK E: chris@versadock.com Versadock is a global business producing drive on docks for jet skis, kayaks and boats up to 26 tonnes. It also offers DrySail systems for sports boats; pontoons and jetties; bridges and walkways; and dockboxes. The company works closely with marina operators to help them increase earnings by identifying ‘dead’ space in the marina, such as corners, shallow and drying areas, and transforming it into revenue generating space.

E: sales@walconmarine.com With over 50 years of experience in civil and marine engineering, Walcon Marine is a global leader in the design, construction and installation of berthing facilities for leisure and commercial vessels. The company has been responsible for many design innovations over the years and examples of its comprehensive range of pontoons and floating breakwaters can be found in over 30 countries.

(See advertisement p. 42)

YACHT PORT MARINAS, Pontevedra, Spain E: oscar@ypmarinas.com The Yacht Port Marinas modular mould system makes any concrete pontoon possible with sizes, to date, up to 3 x 20m. By covering the below-water surfaces, the durability of the concrete pontoon is dramatically increased and minimum maintenance is required.

The product is an ideal solution for breakwaters or marinas. The company also designs and builds cranes, hoists and forklifts etc.

TOPPER INDUSTRIES, Washington, USA E: sales@topperfloats.com Topper Industries is a manufacturer of timber frame, aluminium frame, painted or galvanised steel frame and glue laminated timber frame floating docks. It also designs, engineers and fabricates aluminium gangways and pedestrian/trail bridges up to 20ft wide and 135ft long, floating breakwaters, buoys and marine hardware.

Avalon Marina Bay Marina, Marina Del Rey, CA, USA. Pontoons: Bellingham Marine

www.marinaworld.com - September/October 2015

MW2015SepOct.indd 55

55

05/09/2015 14:12:58

contact@allnautica.com

www.all-nautica.com

Products & accessories for nautical infrastructures

on site Esbjerg Denmark 2015 2 pontoons 35 x 5,00 meter

We build your breakwater wherever you need it % Floating breakwaters " ! ! # % Commercial pontoons " ! ! $ ! % " ‘on site’ % ! ! ! saving you 30%

Save up to 30% YMCA Jetty, UK

MW2015SepOct.indd 56

### # ! " %

05/09/2015 14:12:59

PRODUCTS & SERVICES

Morbihan ports opt for wireless management La Compagnie des Ports du Morbihan, a publicly owned organisation dedicated to the development of nautical facilities in the south of Brittany, France, has adopted the R-marina wireless solution to centralise the management of its yacht harbours.

A total of 12 ports and eight nautical structures will be equipped to remotely control all their operating equipment and provide high quality WiFi coverage to all leisure boaters in berths or ashore.

Created in August 2013 by the innovative start-up S2F Network, R-marina is a smart network dedicated to the Internet of Things (IOT) in marinas and based on an extremely reliable and secure wireless network. This enables a marina operator to remotely monitor and control performance equipment such as video security, access control and entryphone; water, electricity and fuel supplies; and even automate structures such as locks. Its purpose is to reduce the time taken to undertake tasks of low value by introducing real-time communication (remote opening of a parking barrier; remote opening/ closing of a water valve; real-

time monitoring of utilities’ consumption; transmitting messages to dynamic display screens, etc.).

Translated into eight languages, the Ports du Morbihan R-marina portal sets a new standard by incorporating around 20 elements for the first time.

S2F associate director Stéphane Millot describes it as “a solution that has no equivalent at a marina or within a group of so many ports.”

The services are hosted on a shared platform in an external, secure data centre to guarantee inter-operability and service continuity.

For such a large scale project S2F Network is developing new services, for example, to enable boaters in one port to continue using a particular service in another. “Selecting R-marina opens up opportunities for offering new services to our multiple users, be they

www.marinaworld.com - September/October 2015

MW2015SepOct.indd 57

individuals, professionals, local inhabitants, tourists, etc.,” highlights JeanPaul Benon, manager of studies and investment at La Compagnie des Ports du Morbihan. “At the same time, the solution will boost our pioneering and dynamic image,” he adds. R-marina can also be coupled with its R-city counterpart to deploy and centralise management of smart city applications.

Electrical design saves City time and money

The two-year renewable contract, which covers around 10,000 berths and follows contracts for La Rochelle Marina (the world’s second biggest marina with around 4,800 berths), Le Havre and eight UK marinas, extends the current reach of R-marina to around 30 marinas.

The City of Corpus Christi in Texas, USA, recently commissioned HyPower to help in a major renovation of its municipal marina. The company worked with Meeco Sullivan, Jacob White Construction and McDonald Electric.

“We are continuing our development across the Channel and we are currently targeting ports in the south of France, Italy and Croatia,” Millot confirms.

The solution is also gaining appeal at international level, particularly in North America where contacts have already been made and projects should materialise by the end of this year.

Contact S2F Network in Le Havre, France on email: s.debazelaire@s2fnetwork.fr Top left & below: the port of La Trinité is one of the Morbihan ports now equipped with the R-marina wireless solution.

HyPower was chosen to review and propose an electrical design for the project, recommending everything from substations and cable sizes to pedestal configurations and fire protection.

“For the marina and project manager, this seamless approach makes it easier to plan and manage the entire process,” says HyPower director of sales Eric Farley. “The solution saves time and money, allowing a marina to package the quality and flexibility of technology leading power pedestals with industry leading distribution gear within a design that is ready for budgeting.”

The collaboration continues the relationship with Corpus Christi Marina and HyPower as its pedestals were used during previous renovations. HyPower PowerPorts and HydroLockers were also installed.

Contact HyPower in OK, USA on email: sales@ powerpedestal.com

57

05/09/2015 14:12:59

THE NEW GENERATION OF PEDESTALS THAT TURN A COST INTO A PROFIT

LEONARDO

A division of

Hot-Dip Galvanized

MULTIMEDIA AND INTERACTIVE TOUCH SCREEN PC PANEL

BOAT STANDS

“SEAWOLF” CUSTOMISABLE SOFTWARE AIR CONDITIONING AND HEATING FOR YACHTS INTERCHANGEABLE ELECTRICAL BOX FOR ANY LAYOUT UP TO 400A ENVIRONMENTALLY FRIENDLY

We offer a fully galvanized, stronger product… for less than you’re currently paying.

MADE IN ITALY NEW PATENT

DISTRIBUTORS WELCOME

Visit us at the MYP stand n.10

MBS-2

$46.61 Seeking Distributors Monthly Product Showcase

Wood Keel Blocks FROM

$10.47

We manufacture our own solid pine keel blocks at MarineMart. We order wood direct from the mill and cut to specifications after air-drying the beams in our warehouse.

We cut 8” x 8” x 22” and 12” x 12” x 22” blocks.

www.leonardopedestal.com ®

Install Golden Boat Lifts And Lift Your Revenue!

Lifts Up To 120 Tons High Speed, High Torque Sea Drive Gearboxes 6061 T6 Aluminum Welded Construction Stainless Hardware CE Approved

866-900-0983 www.scaffoldmart.com click MarineMart

MW2015SepOct.indd 58

Best Warranty In The Industry

www.goldenboatlifts.com

(+1) 239 337 4141 sales@goldenboatlifts.com 17611 East St. North Fort Myers, FL 33917

05/09/2015 14:13:00

PRODUCTS & SERVICES

Classic choice wins through A selection of Rolec Classic pedestals has been delivered to Austria for installation at a new 92-berth marina in Steyregg. ½inch taps and LED lighting.

The marina also opted for four Classic SOS pedestals.

Rolec international marina sales manager, Kate Broom, commented: “We were delighted to continue our success in Austria with this new project which, along with others we have undertaken in the country throughout the past year, has strongly reinforced the already impressive reputation we enjoy in the area.”

Further orders for Classics have been received for three Dutch marina developments.

New marina, VinkeveenAbcoude, required a selection of 850mm blue pedestals with 16amp, single phase, IP44 upgraded lockable sockets. The units

Pedestals in place in Steyregg (above) and in the Netherlands (left). feature LED lighting and Foamex skins as standard.

Marina den Oever in Wieringerwerf, meanwhile, installed a number of SOS stations, and 1,000mm Classic pedestals were fitted at Marina Peek Amsterdam.

The orders underline the

S R L

E n g i n e e r i n g

a n d

C r a n e s

reputation of the Classic as a best-seller. According to Rolec, it is the world’s most popular marina service pedestal and over 100,000 units have been sold worldwide.

Contact Rolec in the UK on email: rolec@rolecserv.uk

Via P. Torelli, 52 - 43123 PARMA (PR) - Italy tel. +39 0521 208713 - fax +39 0521 208713 e-mail: pdn.cranes@yahoo.it Website: www.pdncranes.it

i PDN Eng

THE WIND OF INNOVATION

20

04 • 2014

years

Cr anes srl

The marina ordered 23 Classic 750mm pedestals, 22 of which feature stainless steel casings; four 16amp single phase IP44 sockets; ½inch and ¼inch turn taps; and LED photocell controlled illumination. The remaining stainless steel pedestal has three 16amp sockets, a 32amp single phase socket,

ne ering and

MOBILE BOAT CRANES AND MOBILE BOAT TRAILERS Diesel Hydraulic or Diesel Electric types. Capacities range from 20 T up to 1000 T PDN-Pubblicità182x132-150623.indd 1 www.marinaworld.com - September/October 2015

MW2015SepOct.indd 59

23/06/15 10:16

59

05/09/2015 14:13:03

Robust high-end marina services

‡ Turnkey installations ‡ Pump-out installations ‡ Prepaid payment systems ‡ Remote and smart metering ‡ Project engineering

www.seijsener.com

info@seijsener.nl

YOUR NEXT AD COULD DIE FROM POOR CIRCULATION.

M A 54 ver ar Au age W in d a to it Ne or 30 Per t C ld th io irc Ju d 1 ula ne st t 20 Jul ion 15 y 2 01 4

6,8

The truth hurts. An advertisement that doesn’t reach its market hurts your budget.

As an advertiser, we believe you need accurate, up to date and independently verified circulation figures for the publications in which you choose to advertise.

That’s precisely what an ABC Certificate of Circulation provides.

Visit: www.abc.org.uk

XXX QJMFSJOH DPN

MW2015SepOct.indd 60

05/09/2015 14:13:05

PRODUCTS & SERVICES

Reservation system enhances office efficiency When Serena Saunders took over Captain John’s Fawn Harbor and Marina in Fawnskin, California, she discovered that the marina’s reservation and payment system was woefully outdated. Page protectors and a whiteboard were used to organise each slip reservation, and most payments were taken by cheque and acknowledged with paper receipts. The mountain of paperwork had taken over office manager Lauren Plouffe’s day.

Saunders was familiar with Molo’s cloud-based marina manager platform and turned to this so as to free her staff for more important customer service duties.

“With Molo you can easily navigate around on the iPad and figure out who your customer is, get the vessel’s information, see if they’ve paid, and take a payment all in one step,” she says.

“It doesn’t take a whole lot of training to get in there and know how to use it. You can train your whole staff because it is that easy.”

Lucas Isola, co-founder of

Molo, notes: “We’re lifelong boaters at Molo and providing powerful and simple to use tools to allow marinas to be more efficient is paramount to our mission.” Molo’s founders designed the platform with marina owners and managers giving hands-on feedback.

Features include reservation management with automatically emailed contracts, digital work orders with email invoicing, mobile point of sale with digital signatures and email receipts, and streamlined workflows for task

management. All of Molo’s features can be accessed dockside using an iPad application or from anywhere using a web browser. Pricing starts at US$199 per month for a 100-slip marina and credit card processing rates start as low as 1.75%.

“In addition to the efficiencies gained by owners, storage customers will enjoy emailed confirmations and contracts,

and all marina patrons will enjoy paperless invoicing, work orders and receipts,” Isola continues. With data securely encrypted and backed up automatically, no start-up costs, unlimited users and 24/7 support, it’s an easy choice for marinas looking to improve their business processes.

Contact Molo in New York, USA on email: contact@ getmolo.com

www.roodberg.com

Hoist

Transport Trailers

Lift

0D[LPLVH \RXU ERDW VWRUDJH ZLWK 5RRGEHUJ HIÀ FLHQF\ Roodberg P: +31 (0) 513 52 13 13 E: info@roodberg.nl www.marinaworld.com - September/October 2015

MW2015SepOct.indd 61

61

05/09/2015 14:13:06

PRODUCTS & SERVICES Index to Advertisers All Nautica, France 56 Applied Technology & Marinagement, USA 54 BASF Performance Materials, Germany 41 Bellingham Marine, USA 6, 7 Best Marine Solutions, USA 63 Boat Lift, Italy 37 Camper & Nicholsons Marinas, UK 18 Conolift by Kropf Industrial, Canada 24 DualDocker, Austria 10 & 11 Dura Composites, UK 43 Eaton Marina Power & Lighting, USA 22 Edgewater Resources, USA 24 Gigieffe, Italy 52 Golden Boat Lifts, USA 58 Hazelett Marine, USA 48 IMBC 2016, USA 56 IMCI, Belgium 48 Ingemar, Italy 14 JLD International, Netherlands 50 M-Tech, Australia 50 MDL Marina Consultancy, UK 16 METS & MYP 2015, Netherlands 31 Marcello Giampiccolo, Italy 58 Maricer, UK 48 Marina Manual, UK 52 Marina Master/IRM, Slovenia 52 Marina Projects, UK 28 Marine Travelift, USA 64 Marinetek, Finland 4 Martini Alfredo, Italy 28 Moffatt & Nichol, USA 42 Mourjan Marinas, UAE 35 Orsta Breakwater, Netherlands 56 PDN Engineering, Italy 59 Pacsoft, New Zealand 54 Perma Composites, Australia 54 Pile Ring, New Zealand 60 Plus Marine, Italy 44 Pontech, Sweden 23 Poralu Marine, France 32 & 33 Ravens Marine, USA 26 Rolec Services, UK 12 Roodberg - a brand of Frisian Industries, Netherlands 61 SF Marina System, Sweden 2 Scaffoldmart, USA 58 Seaflex, Sweden 8 Seijsener, Netherlands 60 Superior, Australia 20 Swede Ship Sublift, Sweden 44 Transas Marine, Germany 15 Walcon Marine, UK 42

62

MW2015SepOct.indd 62

Export broadens for Italian hoists

Navar, a boatyard located between the local airport and Porto Montenegro in Tivat, has purchased an Idra type 200 ton capacity boat hoist from Italian company PDN Engineering & Cranes.

The hoist has an internal width of 10m and boasts universal steering and winch hoist synchronisation, together with PDN’s electronic weighing system and RTA (Remote Tele Assistance) crane fault finding and monitoring feature. The machine will enable Navar to better serve the increasing need to handle larger vessels in a new and fast developing yachting market.

Turkish marinas and yards have also boosted the PDN order book. Gokova Oren Marina near Bodrum has ordered an Idra 100 ton machine (above) with similar features to Navar’s 200 ton hoist but internal width of 6m. An auxiliary jib crane for demasting sailing boats has also been selected. Both are due for imminent delivery.

DTI International Trading in Istanbul has also placed orders for a 700 ton hoist, 300 ton hoist and 40 ton trailer.

Delivery is expected in the first half of 2016. The 700 ton machine is believed

to be the biggest crane of its type ever supplied to Turkey.

Additional export orders stretch to far flung island destinations. Taylor Smith & Co Ltd., a drydock and ship repair group in Mauritius, together with local partner Gondwana Marine Services, has taken delivery of an Idra 150 ton hoist to handle monohulls and catamarans. Steering and hoist synchronisation with PDN’s electronic weighing system and RTA system was provided.

Taylor Smith has also ordered a 40 ton MRT boat trailer. This is identical to a machine recently supplied to a yard in the Seychelles. Both have variable internal width – to enable the handling of catamarans – and hydraulic telescopic handles to lift and support wide vessels.

Contact PDN Engineering & Cranes in Parma, Italy on email: pdn.cranes@ yahoo.it

www.marinaworld.com - September/October 2015

05/09/2015 14:13:08

CLEAN+GREEN

MARINA

#PPUI TidyDock #PPUI TRASH CONTAINMENT

BEST M ARINE SaniSailor

SAFETIONS SOLU CLEAN | GREEN | SAFE | SMART MARINA TidyDock

AquaMedic

SaniSailor

AquaClean

AquaMedic

SolarDock

MARINE PUMPOUT SOLUTIONS

WATER QUALITY SYSTEMS

TRASH CONTAINMENT

BOATWASH RECYCLING SYSTEMS

MARINE PUMPOUT SOLUTIONS

BEST M ARINE Fire+Life Safety SOLU TIONS

BEST M ARINE

WATER QUALITY SYSTEMS

SOLU TIONS

AquaClean SkinSafetyCenter

CLEAN | GREEN | SAFE | SMART

CLEAN | GREEN | SAFE | SMART

SOLAR MARINA LIGHTING SOLUTIONS

OilSpillRESPONSE SYSTEMS HYDROCARBON TREATMENT

BOATWASH RECYCLING SYSTEMS

MarinaFirstAidKit SolarDock SOLAR MARINA LIGHTING SOLUTIONS

SafeDock -&"%&3 JO RESPONSE OilSpill SYSTEMS -&"%&3 JO LEADER in BEST QFSJTUBMUJD SFMJBCJMJUZ QFSJTUBMUJD SFMJBCJMJUZ M ARINE peristaltic reliability...

FastAttack SOLU TIONS HYDROCARBON TREATMENT

1"35/&3 GPS CFJOH B 1"35/&3 GPS CFJOH B PARTNER for being a DMFBO NBSJOB

DMFBO NBSJOB clean marina...

PORTABLE MARINA FIREFIGHTING SYSTEMS

CLEAN | GREEN | SAFE | SMART

PORTABLE MARINA FIREFIGHTING SYSTEMS

*//07"503 INNOVATOR in JO NBSJOB marina *//07"503 JO NBSJOB firefighting...

GJSFGJHIUJOH GJSFGJHIUJOH

Toll Free dŽůů &ĆŒÄžÄž Ď´ĎąĎąÍ˜ĎŻĎąĎąÍ˜ĎŻĎ˛ĎŽĎą 855.355.3625 dŽůů &ĆŒÄžÄž Ď´ĎąĎąÍ˜ĎŻĎąĎąÍ˜ĎŻĎ˛ĎŽĎą /ĹśĆšÄžĆŒĹśÄ‚ĆšĹ?ŽŜĂů ĎŹĎ­Í˜ĎłĎŽĎłÍ˜Ď´ĎŽĎ­Í˜ĎłĎ´Ď˛Ďł International 01.727.821.7867 /ĹśĆšÄžĆŒĹśÄ‚ĆšĹ?ŽŜĂů ĎŹĎ­Í˜ĎłĎŽĎłÍ˜Ď´ĎŽĎ­Í˜ĎłĎ´Ď˛Ďł MW2015SepOct.indd 63

55

IF TFMMJOH 4BOJ4BJMPS IF TFMMJOH 4BOJ4BJMPS "RVB$MFBO BOE 'BTU "UUBDL T he # 1 selling SaniSailor, "RVB$MFBO BOE 'BTU "UUBDL TZTUFNT BMTP SFQSFTFOU PVS DPSF AquaClean and Fast Attack TZTUFNT BMTP SFQSFTFOU PVS DPSF NJTTJPO -FBEFSTIJQ JO UIF systems also represent our core NJTTJPO -FBEFSTIJQ JO UIF NBSLFU 1BSUOFSTIJQ XJUI PVS mission; Leadership in the NBSLFU 1BSUOFSTIJQ XJUI PVS DMJFOUT BOE *OOPWBUJPO JO market, Partnership with our DMJFOUT BOE *OOPWBUJPO JO TPMVUJPOT clients and Innovation in TPMVUJPOT solutions!

'JOE ZPVS TPMVUJPOT BU

Find your solutions at: 'JOE ZPVS TPMVUJPOT BU XXX CFTUNBSJOFTPMVUJPOT DPN www.bestmarinesolutions.com XXX CFTUNBSJOFTPMVUJPOT DPN XXX CFTUNBSJOFQVNQT DPN www.bestmarinepumps.com XXX CFTUNBSJOFQVNQT DPN 05/09/2015 14:13:14

Trusted Name, Proven Value

Higher performance.

Greater value.

100 BFMII

Our new mobile boat hoists are designed with the features and options that matter most to European marinas and boatyards. Get the capabilities your business needs with the durability and versatility you expect from Marine Travelift machines.

Marine Travelift mobile boat hoists prove their reliability on every lift, every day. marinetravelift.com +1.920.743.6202 / sales@marinetravelift.com

Š2014 Marine Travelift

MW2015SepOct.indd 64

05/09/2015 14:13:18