1 minute read

Figure 25: PDP instrument background principle of operation [73

reflection amplitudes and two-way travel time of the received EM waves are used to calculate and analyze dielectric constants that can be correlated with percent air voids [63, 71]. GPR technology comes in two main forms: ground-coupled and air-coupled. Air-coupled systems holds the antennas certain height off the ground instead of in direct contact making it the more commonly used method for calculating compaction of HMA [71, 73]. Figure 25 presents a diagram of a Pavement Density Profiler (PDP) process which uses an air coupled GPR system but a differing data processing method.

Figure 25: PDP instrument background principle of operation [73].

A Density Profiling System (DPS) is a recent GPR technology used for determining asphalt compaction in the field. A DPS is a non-contact, air-coupled GPR that has shown promise to supplement, and possibly eventually replace, most field coring activities [74]. DPS method is also beneficial for longitudinal joint density evaluation because it allows for continuous, real-time measurements. DPS operators have also suggested potential for this application to thicker layers [75]. The device is equipped with antennas that are suspended a short distance above the pavement. This device has been used attached to a human operated vehicle (Figure 26) or behind trucks and rollers. The continued innovations of this technology will be explored in this report as DPSs become remote controlled devices.

39

This article is from: