Samuel Gayne Portfolio
Detail Instrument Drawing
2
The Instrument Drawing 2018 In-Class, Individual Project Course - Princeton ArcPrep Faculty - Katie Zaeh The instrument drawing was based on drawing our favorite instrument in plan, section and elevation. So, I started by measuring every side of my instrument, then I made a plan and elvation.To make my section, I had to cut through and reference my elevation to get my section. Detail of Instrument Drawing
3
Instrument Drawing, 2018, 24”x36”, Graphite on Vellum
4 “You Deserve It” Diagram, 2018, Paper Collage
You Deserve It 2018 Individual Project Course - Princeton ArcPrep Faculty - Katie Zaeh This project was made from a gospel song called ‘‘You Deserve it” by JJ. Hairston. I listened to this song, then I mapped the the volume, the pitch, and the beat of the song. After mapping, I made a 3D model representing everything I drew.
Detail of “You Deserve It” Model, 2018, Foam core and chip board
5
“You Deserve It” Model, 2018, Foam core and chip board
6
Detail of Title, Year, Size, Medium
7
“You Deserve It” Axonometric Drawing, 2018, Graphite on Vellum
8
Listening booth 2018 In-Class, Individual Project Course - Princeton ArcPrep Faculty - Katie Zaeh This project was all about designing a listening booth where people will go to make a phone call, listen to music, or wait for someone. I startedby sketching the chipboard and museum board of my “You Deserve it” model. After sketching, i was able to come up with a plan and elevation at 1/4’’ = 1’0’’. Preliminary Sketches, Year, Size, Medium
9
Listening Booth, 2018, Graphite on Vellum
10
Architecture Chair 2018 In-Class, Group Project Course - Princeton ArcPrep Faculty - Katie Zaeh This project was done by four group members and one instructor. In this project, my group focused on the beauty of the chair. We designed the chair in a way that when people sit on it will not break easily. I primarily assembled different parts of chair.
Architecture Chair, 2018, Cardboard
11
Sketch of Architecture Chair, 2018, Pencil
12
The Puzzle Concrete 2018 In-Class, Group Project Course - Princeton ArcPrep Faculty - Katie Zaeh This project was done by four group members and one instructor. For this project, we made a three-piece puzzle from small blocks, then we made a 3D drawing from these three pieces of the puzzle. After drawing we scaled up the puzzle and cast it in concrete. I was the clayman during the project. The Puzzle Concrete, 2018, 6”x6”x6”, Concrete
The Puzzle Concrete, 2018, 6”x6”x6”, Concrete
The Puzzle Concrete Axonometric, 2018, 19.5” x 36”, Marker on Vellum
13
14
Bandshell 2019 In-Class, Individual Project Course - Princeton ArcPrep Faculty - Katie Zaeh
Sketch, 2019, Pencil
Site Plan, 2019, Graphite on Vellum
15
Plan and Section, 2019, Graphite on Vellum
16
Class Site Model, 2019, 17”x29”, Chipboard
17
Bandshell Model, Year, Size, Medium
ArcPrep