Silvio Davila Portfolio
guitar base, 2018
2
guitar drawing 2018 In-Class, Individual Project Course - Princeton ArcPrep Faculty - Katie Zaeh For this project, I chose an instrument and measured it. I then got trace paper and created a rough design. After that, I redrew a final copy of the guitar on vellum and poched it.
guitar tail, 2018
3
guitar drawing, 2018, 24” x 36”, graphite on vellum
4
sound model 2018 In-Class, Individual Project Course - Princeton ArcPrep Faculty - Katie Zaeh I started by project by choosing a song and choosing lyrics. After we diagrammed the pitch, volume, and beat. After I had the general 2-D shapes, I made a 3-D model with 3 different layers.
sound diagram, 2018, paper collage
5
sound model, 2018, chipboard, museum board and foam core
6
detail of axonometric sound drawing, 2018
7
axonometric sound drawing, 2018, graphite on vellum
8
sound building 2018 In-Class, Individual Project Course - Princeton ArcPrep Faculty - Katie Zaeh Out of all the parts of the model, I chose one piece and designed a building from it. This building is a place where people can come in and listen to either my song or their favorite songs. Also, it is inspired by the design of my sound model
sound building sketches, 2018
9
sound building, 2018, 24” x 36”, graphite on vellum
10
cardboard chair 2018 In-Class, Group Project Course - Princeton ArcPrep Faculty - Katie Zaeh In this card chair box project I cut and glued. Our goal was to make a chair that is sturdy, functional and visually appealing. We started by cutting out the pieces we needed. After that, we cut slits that let us slide each piece together.
cardboard chair, 2018, cardboard
11
sketches from life, 2018 , pencil
12
instrument, 2018, pencil
Independent Work 2018 Independent, Individual Project
sketch, 2018, pencil
13
fist, batman, rose, 2018, paper and pencil
14
axonometric project 2018 In-Class, Group Project Course - Princeton ArcPrep Faculty - Katie Zaeh Our group goal was to make the shapes fit together. My role in this project was to measure and glue. We first separated a cube into 3 pieces. We then built those shapes out of PVC foam board and poured the concrete inside.
concrete cube, 2018, 6”x6”x6”, concrete
concrete cube, 2018, 6”x6”x6”, concrete
concrete cube axonometric, 2018, 19.5” x 36”, paper & pencil
15
sketch, 2018, pencil
16
bandshell 2018 In-Class, Individual Project Course - Princeton ArcPrep Faculty - Katie Zaeh In this bandshell project, I started by sketching the bandshell. Then, I decided were it would be located. After that, I decided what it would be surrounded by. Lastly, we did the final drawing and 3-D drawing.
site Plan, 2018, pencil
17
plan and section, 2018, 24” x 34”, pencil on vellum
18
bandshell model, 2018, pla plastic
19
class site model, 2018, 17” x 29”, pla plastic
ArcPrep