83mm x 4mm OTO Mills Rafted (QTC) Tube Mill with MAIR Packaging Line Line Specifications OTO Mills High Production ERW Tube Line QTC Design Wall Thickness Range: 1.2mm – 4mm Round Tube OD Ranges: 25mm – 83.2mm Square Shapes Range: 20mm x 20mm – 90mm x 40mm Production Speed: 140m/min Direction: Left to Right Complete Line with the Following Components: • Double End OTO Mills Mandrel Uncoiler • Automatic Strip Joiner • Floop Vertical Strip Accumulator • Rafted Quick Change Forming & Sizing Sections • Thermatool 450 kW Solid State Welder • Sulzer Zinc Metco Re-Metalizing Gun • OTO Mills Cold Saw Cut-Off • MAIR Automatic Packaging Line with Orgapack Strapping • Tube Length: 4m – 8m • Bundle Size: 200mm x 200mm – 600mm x 500mm • Bundle Weight: 3,000 kg • Electronics by Siemens Series 7 • Controls and Electronics • Siemens AC Master Drives
Telephone: +1-734-727-0600
CONTACT GALAXIE CORPORATION FOR MORE INFORMATION Email: machking@galcorp.com Website: www.galaxiecorp.com
76mm x 3mm Voest-Alpine Rafted Tube Mill with In-Line Hot Dip Galvanizing Mill Features • • • • • •
Voest Alpine Mill (Austria) Kusakabe Shear (Japan) In-Line Zinc Coating (Galvanizing) In-Line Painting & Clear Coating Internal Coating (Painting) on all sizes Mill Design Speed = 200 m/min max.
• Complete Mill with the • following: • 4 Arm Durmech Turnstile • • Automatic Loading Device • • Double Uncoiler • Pinch Roll & Leveler • • Strip Joiner • Horizontal Accumulator • • 8 Wheel Shotblaster • Pinch Roll • • Forming Stand • • 600 kW Solid State Induction Welder • • Pickle/Flux Application Tanks & Scrubber • • 4000 kVA Induction Heater • • Galvanizing Bath & Zinc • Troughs • •
Telephone: +1-734-727-0600
Quench Tanks & Pumps Quench Cooling Tower Sizing Stand 500 kW Induction PreHeater Paint/Passivation Application System Drying Conveyors - Gas Fired Pinch Roll Kusakabe Flying Cut-Off (Nick & Shear) Run-Out, Inspection & Reject Table Bundling Machine Automatic Strapper PLC System SCADA System Allen Bradley 1395 Drives
CONTACT GALAXIE CORPORATION FOR MORE INFORMATION Email: machking@galcorp.com Website: www.galaxiecorp.com
1500mm x 9mm x 30 Ton (2 Head) Wyko Slitting Line Line Specifications Thickness Range: 1.6mm – 9mm Entry & Exit Coil Weight: 30 Tons Coil ID: 508mm Coil OD: 2,100mm Max. (2) Slitting Heads Arbor Diameter: 254mm (10”) 200 kW Recoiler
Telephone: +1-734-727-0600
Complete with: • Entry Coil Car • Primary Straightener • Snubber • Entry Shear • Pit Carry Over Tables • Exit Trans Table • Entry Pinch Roll • Side Guide • Slitter Head (x2) • Slitter Sub Base
• • • • • •
Strip Tensioner Tail Shear Recoiler Mandrel Exit Coil Car Dual Scrap Winder Scrap Discharge Trolley • Scrap Bin • Tooling, Electrics, Controls, Hydraulics, Siemens Digital Drives (2006)
CONTACT GALAXIE CORPORATION FOR MORE INFORMATION Email: machking@galcorp.com Website: www.galaxiecorp.com
1600mm x 8mm x 30 Ton (2 Head) Durmech Slitting Line
Complete Line with the following • Coil Storage Saddles Supplied by Durmech (UK) • 30 Ton Pit Mounted Coil Car 1600mm max Coil Width • Single Mandrel Uncoiler & Coil Capacity: 30 MT 2 Quick Change Slitting Heads Snubber Butech Scrap Chopping System • 610mm/760mm Uncoiler Mandrel Shimless Tooling • Outboard Bearing • Peeler & Breaker Roll • Auto Center Guide System • 3 Roll Flattener & Pinch Rolls • Crop Shear • Slitter Side Guides • Interchangeable Head Eccentric Slitter • Slitter Drive
Features
Telephone: +1-734-727-0600
• 2 Slitter Heads • Lifting Beam for Slitting Heads • Slitter Setup Bed w/ Tooling Stripping Arm • Butech Scrap Chopper • Transfer Car • Drag Pad, Pinch Rolls & Shear • Overarm Separator • 610mm Recoiler Mandrel • 30 Ton Recoiler w/ Pushoff & Clamp • Outboard Bearing • 30 Ton Floor Mounted Coil Car • 4 Arm Turnstile • Separator Tooling Transfer Stations
CONTACT GALAXIE CORPORATION FOR MORE INFORMATION Email: machking@galcorp.com Website: www.galaxiecorp.com