Machinery International Corp

Page 1

Machinery International Corp.

20 Commerce Dr. North Branford, CT 06471 USA Tel: +1 203-484-0400 Fax: +1 203-484-4499 sales@machyintl.com

BUYING, SELLING, AND APPRAISING USED METALWORKING MACHINERY

THE WORLD’S SOURCE FOR QUALITY TUBE MACHINERY

ULTRA MODERN COPPER TUBE PLANT FOR SALE (12291)

Hundreds of Machines in Stock and at Plants is around World. buy andcopper sell complete plants.using Herestate-of-the-art are just a few! Machinery International Corporation proudthe to offer forPlus salewe thisappraise, fully automated tube factory

technology in all aspects of production and material handling. This fully integrated plant from melting/casting to finish product uses cast and roll technology to produce 1815 metric tons (4,000,000 pounds) per month of the highest quality copper tube for the water/plumbing industry and inner groove copper tubing for the ACR air conditioning and refrigeration industry.

COPPER TUBE PLANT FOR SALE

All machines were produced in 2001 or newer by the world's best known manufacturers, including SMS, MRB Schumag, Located in Sydney, Australia Induga Furnaces, and Asmag material handling systems. The production flow is computer controlled, and all product travels To be sold as Individual exclusively by Machinery International Corporation from machine- to-machine in payoff baskets thatMachines are CNC controlled. This is an excellent opportunity to purchase the world's most modern technology at a fraction of the cost of new. The sale

Meathook Overhead Coil Conveyor System Featuring includes all necessary hardware and software, and all manufacturers are available for technical support and spare parts. In-Ground Power Driven Basket Conveyor System

Three Level BasketPLANT Conveyor/Storage SystemSOLD AS A NO3 INDIVIDUAL MACHINES SOLDLINE SEPARATELY. THIS IS BEING SCHUMAG STATION CASCADE COMBINEDWILL TUBE BE DRAWING COMPLETE PLANT ONLY FOR EXPORT OUTSIDE OF NORTH AMERICA. Tube Drawing Line FINISHING EQUIPMENT - New in 1997 - Draws copper shells from 3.35” (85 mm) to 1 ½” (38 mm) in one operation - Produces either coils or straight lengths - Demag Pick and Place loading crane system, fully automated, shell tracking - Includes all necessary squeeze pointers and saws - Schumag inverted coiler to make 84” (2134 mm) coils for drawblocks - Fully automated - State-of-the-Art

3500 TON BLH OIL HYDRAULIC EXTRUSION PRESS

Schumag Model OB Combined Drawing Machine for ½” - 0.78” (12.5 - 2 mm) straighten, draw, Eddy Current Test (ECT), Flying Saw, for straight lengths or coils (12744)

Vaughn Straighten, Cut & Coil Line for ¼” 1” (6 - 25 mm), Ruesch Inverted Coiler

Schumag OB

- Underwater runout Schumag Level Winding Line, New 1991, for 1/8” - 1” (3.18 - 25 mm) Tube - Loma Model T40 fully automated PLC Billet Saw - Granco Clark Gas-Fired Billet Furnace CHARACTERISTICS 400 KW In Line Annealer with Payoff, Straightener, Accumulator, Inductoheat Tube - Maximum Billet 12” (305 mm) x 24” (610 mm) LengthINDIVIDUAL MACHINE - Billet SMS Size asMEER used 10 ¾” (273 mm) Diameter Annealer, LomaticMODEL Draw Station, Flying Shear CUT, COIL, TEST & HORIZONTAL CONTINUOUS CASTING PLANT SCHUMAG RFSand STRAIGHTEN, - ChiplessSMS Rotary Cutoff for front Charging and back ends Meer Cathode System MARKING FINISHING MACHINE Twoshell 900storage kW, 8 rack Ton system Induga Channel Melting Furnaces size:&6mm - 30mm (0.236" - 1.18") - Automated Draw,Tube Straighten Cut Line, Pointer, Schumag Size 2 Draw Station, Flying Shear, 350 kW, 10 Ton Induga Pressurized holding furnace (and spare furnace)Loma Mann Coiler, for finish straight lengths or coils SMS Meer Four Strand Withdrawal Train with two separate withdraw DRAWBENCHES drives to produce 101mm (4") tube

30 Ton Vaughn 5 Die,Tube 90 Ft.Weight: (27.4 m) 1080 draw, barrel rollover, 400 HP D.C. (12738) Maximum Kg (2381 Lbs.) 40 Ton Farmer Norton 1 or 3 Die, 52 Ft. (15.8 m) draw, barrel rollover, 100 HP (12737) 40 TonSMS Hydraulic 1 DieTUBE for drawing and expanding, 45 Ft. (13.7 m) draw, 110 KW MEER MILLING MACHINE (12737) MEER HRM REDUCTION MILL 25 TonSMS Mannesmann Meer 3100 Die,HIGH 75 Ft. (23 m) draw, barrel rollover, 300 HP (12735)

2134mm (84") SMS MEER SPINNER BLOCK Model No.: 45 TVC 2000

Eddy Maximum Current Test,shell: Marking & Packing (Bundling) Line, xfor0.070") straight Wall lengths 1” - 8” 35mm x 1.75mm (1.378" (25 - Speed: 206 mm)250 Dia. -w/bundle unloader, ECT station, Matthews marker, weighing, 1500 m/min (820 - 4920 FPM) bundling and strapping

INDUCTOHEAT IN-LINE COIL TO COIL ANNEALING FURNACE

TubeBlow diameter: 9.0mm 10mm 0.40") ACR Tube & Cap Line, New -2007, for(0.35" ½” - 2”- (12.7 - 50 mm) dia. x 16 ½ - 20 Ft. Main drive: 2 x 428kW (574 HP) DC Wall: 0.21mm 0.6mm (0.008" 0.0236") (5 - 6.1 m) straight lengths, Tube Clean I.D. plug blowing, end capping stations and extra Superimpose drive: 1 x 428 kW (574 HP) DC Line speed: 300m/min. (984 FPM) DRAWBLOCKS Feed: 1194mm - 1270mm/Min. (47 - 50 ipm) @ (4" O.D. shell x 1" wall) stations for future applications like nitrogen pre-charging, deburring, etc. 84” (2134 mm) MRB Block, Model 1991, 0 - 3937 FPM (1200 m/ Output tubeSpinner is: 201m (660 Ft.)VNCB84, Long xNew 57mm (2.25") O.D. x 3.175mm MRB SCHUMAG MODEL VNVG 2000 INNER GROOVING Min.), 300 KW, for 1.2” Bundling and Packing Line, New 1988, for straight lengths ½” - 1 3/8” (12.7 - 35 mm) (0.125") Wall(30 mm) to 0.157” (4 mm) draw, 8 Station Carrousel (12739) MACHINES (4 ea) 907 Kg (2,000 Lbs.) shell is processed in 13 - 14 minutes. Draw force maximum:counting, 8 kN loading, bundling, strapping and weighing dia. including tube separation, Maximum Speed: 125m/Min. (410 FPM) 84” (2134 mm) Vaughn Rotubloc Spinner Block, 0-2400 FPM (731 m/min.) 350 HP, for MODEL IIB/12 AND Carrousel IIB/8 DOUBLE Grooving 100m/Min. FPM)6 Roll, 0 - 50 FPM 2” (50 SCHUMAG mm) to ¼” (6.35 mm) draw, 8 Station (12739) COMBINED DRAWING BronxMaximum 6CR7 RotaryInner Straightener, for Speed: ¾” - 8” (19 - 203 mm)(325 dia. tube, MACHINE Maximum inlet: 16.3 mm O.D. (0.642") (0 - 15 m/min.), optional incising marking station Tube size: 54mm (2.125") at entry Range of tables, inner groove tube processing: 12.7mm - 6.35mm (1/2" - 1/4") 84” (2134 mm) Vaughn Inverted Tube Drop Block, Model 84-24-54, 84” working face, 48mm (1.9") after first draw O.D. 0 - 2000 FPM (610 m/min.), HP, Mitchell Hydraulicdraw Pointer, for 2” (50 mm) to ¾” BronxMotor: 6CR2½37 Rotary forultra-high ¼” - 7/8” (6 - 22 mm) dia. tube, 6 Roll 38mm 450 (1.525") after second kW,Straightener, 45000 RPM speed levitation motor (19 mm) draw (12741) Quantity: 4 separate lines SCHUMAG MODEL IID/5 INTERMEDIATE COMBINED DRAWING

MACHINE 84” (2134 mm) Inverted Tube Drop Block, 110” (2794 mm) working face, 0 - 1980 Entry O.D.: 43mm FPM (600Maximum m/min.), 450 HP, Mitchell Hydraulic(1.692") Pointer, for 2” (50 mm) to ¾” (19 mm) draw (12742) Typical Entry Size: 38.7mm (1.525") Typical Exit Size: 28.5mm (1.125")

SCHUMAG MODEL KZ-P-IIID COMBINATION DRAWING & FINISHING MACHINE Tube Size Range: 22mm - 47.6mm (0.875" - 1.875") Cut length: Straight: 3m or 6m (10 Ft. or 20 Ft.) Coils: 15.25m - 30.5m (50 Ft. - 100 Ft.)

Mackintosh-Hemphill Rotary Straightener, for ½” - 2½” (12.7 - 63 mm) dia. tube, 6 Roll, EFCO ROLLER HEARTH ANNEALING FURNACE tables continued next page 4 SCRAP CHOPPER PACKAGING LINE This semi-automated line made by Smurfit-Stone Container Systems receives coils directly from the annealing furnace via conveyor. It places the coil on a pre-formed box, folds the box and glues it. It then stacks boxes and wraps the stack with plastic. ASMAG COMPUTER CONTROLLED BASKET STORAGE AND RETRIEVAL SYSTEM

Contact: John Conroy john@machyintl.com Tel: (+1)-203-484-0400

For a list of other tube, wire and strip factories for sale plus over 700 individual machines in stock, visit our website at www.machyintl.com MRB Spinner Block Bronx 6CR7

MRB Spinner Block


Annealed Coil Packaging Line, New 1993, automatically seals, boxes, stacks, weighs, marks, and palletizes freshly annealed coils, to be sold with or without annealing furnace PVC Coating Line ½” - 1” (12.7 - 25 mm) for straight lengths or coils PVC Coating Line for ½” - 4” (12.7 - 101 mm) for straight lengths only 60” (1524 mm) Hedley Roller Hearth Annealing Furnace, Gas-Fired, 2 Zone for level wound coils, layer wound coils or straight lengths, 3300 Lb./Hr. (1500 KG/Hr.) 48” (1220 mm) wide Roller Hearth Annealing Furnace, electric for coils or straight lengths, 1330 Lb./Hr. (600 KG/Hr.)

FOUNDRY Asarco Shaft Furnace, 10 Tons/Hr., 28 Ft., High Efficiency Melt Furnace with Pre-Heater and afterburners

Asarco Continuous Caster with 15 Ton Gas-Fired Holding Furnace, single strand vertical cast for up to 12” (305 mm) copper logs, flying saw with chip extraction, log elevator, water cooling system and moulds for 9.65” (245 mm) and 10¾” (273 mm) copper logs Semi-Continuous Caster for twin billets or single strand slab, 20 Ton Gas-Fired Holding Furnace, for 39 Ft. (12 m) long billets of 11.8” (300 mm) dia. or slabs up to 37.4” (950 mm) wide, in-line billet/slab saw with 40” blade and 100 HP, powered exit conveyor, all fed by shaft furnace. PLUS Complete Die Shop for grinding, polishing and re-sizing with Die Quips, lathes, grinders, etc. Thousands of Carbide Dies & Plugs Complete Laboratory with ARL Spectrometer, Tensile Testers, Hardness Testers, etc. Saws, Scrap Choppers, Conveyors, Swagers, Push Pointers, Squeeze Pointers and MORE

For information, quotations or an inspection visit contact: John Conroy, Machinery International Corporation - USA Tel: (+1) 203-484-0400 Fax: (+1) 203-484-4499 E-mail: john@machyintl.com Web: www.machyintl.com

A Complete Copper Rod and Tube Plant using ‘Upcast’ Technology (10734) Located in Mexico

This complete plant near Mexico City produces 4500 metric tons of copper tube and 5000 metric tons of copper rod annually. It can be purchased for relocation or with the real-estate for a turnkey start-up on site. The equipment is very modern and has seen only limited use. The building is modern and has ample spare land for expansion in a safe and clean industrial park.

The plant includes: c Upward continuous caster for rod and tube up to 8 strands with a 5 Ton Induction Melting Furnace and a 3 Ton Induction Holding Furnace c Two Strand Tube Pilger Mill c 4 x 5 Ton Drawbenches c 4 x 3 Ton Drawbenches c “Y” Type Dong Fang 12 Stand Rod Reducing Mill c Waterbury Farrel Model 1-T 10 Die Wire Drawer c Cincinnati Cathode Plate Shear c Wire Drawers, Laboratory, Pointers and a large quantity of spare refractory for the Melt Furnace and Caster

Available only as a complete plant. A GREAT INEXPENSIVE TURNKEY OPPORTUNITY! For information, quotations or an inspection visit contact: John Conroy, Machinery International Corporation - USA Tel: (+1) 203-484-0400 Fax: (+1) 203-484-4499 E-mail: john@machyintl.com Web: www.machyintl.com


Annealed Coil Packaging Line, New 1993, automatically seals, boxes, stacks, weighs, marks, and palletizes freshly annealed coils, to be sold with or without annealing furnace PVC Coating Line ½” - 1” (12.7 - 25 mm) for straight lengths or coils PVC Coating Line for ½” - 4” (12.7 - 101 mm) for straight lengths only 60” (1524 mm) Hedley Roller Hearth Annealing Furnace, Gas-Fired, 2 Zone for level wound coils, layer wound coils or straight lengths, 3300 Lb./Hr. (1500 KG/Hr.) 48” (1220 mm) wide Roller Hearth Annealing Furnace, electric for coils or straight lengths, 1330 Lb./Hr. (600 KG/Hr.)

FOUNDRY Asarco Shaft Furnace, 10 Tons/Hr., 28 Ft., High Efficiency Melt Furnace with Pre-Heater and afterburners

Asarco Continuous Caster with 15 Ton Gas-Fired Holding Furnace, single strand vertical cast for up to 12” (305 mm) copper logs, flying saw with chip extraction, log elevator, water cooling system and moulds for 9.65” (245 mm) and 10¾” (273 mm) copper logs Semi-Continuous Caster for twin billets or single strand slab, 20 Ton Gas-Fired Holding Furnace, for 39 Ft. (12 m) long billets of 11.8” (300 mm) dia. or slabs up to 37.4” (950 mm) wide, in-line billet/slab saw with 40” blade and 100 HP, powered exit conveyor, all fed by shaft furnace. PLUS Complete Die Shop for grinding, polishing and re-sizing with Die Quips, lathes, grinders, etc. Thousands of Carbide Dies & Plugs Complete Laboratory with ARL Spectrometer, Tensile Testers, Hardness Testers, etc. Saws, Scrap Choppers, Conveyors, Swagers, Push Pointers, Squeeze Pointers and MORE

For information, quotations or an inspection visit contact: John Conroy, Machinery International Corporation - USA Tel: (+1) 203-484-0400 Fax: (+1) 203-484-4499 E-mail: john@machyintl.com Web: www.machyintl.com

A Complete Copper Rod and Tube Plant using ‘Upcast’ Technology (10734) Located in Mexico

This complete plant near Mexico City produces 4500 metric tons of copper tube and 5000 metric tons of copper rod annually. It can be purchased for relocation or with the real-estate for a turnkey start-up on site. The equipment is very modern and has seen only limited use. The building is modern and has ample spare land for expansion in a safe and clean industrial park.

The plant includes: c Upward continuous caster for rod and tube up to 8 strands with a 5 Ton Induction Melting Furnace and a 3 Ton Induction Holding Furnace c Two Strand Tube Pilger Mill c 4 x 5 Ton Drawbenches c 4 x 3 Ton Drawbenches c “Y” Type Dong Fang 12 Stand Rod Reducing Mill c Waterbury Farrel Model 1-T 10 Die Wire Drawer c Cincinnati Cathode Plate Shear c Wire Drawers, Laboratory, Pointers and a large quantity of spare refractory for the Melt Furnace and Caster

Available only as a complete plant. A GREAT INEXPENSIVE TURNKEY OPPORTUNITY! For information, quotations or an inspection visit contact: John Conroy, Machinery International Corporation - USA Tel: (+1) 203-484-0400 Fax: (+1) 203-484-4499 E-mail: john@machyintl.com Web: www.machyintl.com


Machinery International Corp. Machinery BUYING, SELLING, AND APPRAISING USED METALWORKING MACHINERY International Corp.

20 Commerce Dr. North Branford, CT 06471 USA Tel: +1 203-484-0400 Dr. Fax: 20 +1 Commerce 203-484-4499 North Branford, CT 06471 USA sales@machyintl.com Tel: +1 203-484-0400 Fax: +1 203-484-4499 sales@machyintl.com

Located in USA BUYING,MODERN SELLING, AND APPRAISING USED METALWORKING MACHINERY ULTRA COPPER TUBE PLANT FOR SALE (12291) Machinery International Corporation is proud to offer for sale this fully automated copper tube factory using state-of-the-art ULTRA TUBE SALEto (12291) technology in all MODERN aspects of productionCOPPER and material handling. This fullyPLANT integrated plant FOR from melting/casting finish product uses cast and roll technology to produce 1815tometric tons (4,000,000 pounds) percopper monthtube of the highest quality copper tube for Machinery International Corporation is proud offer for sale this fully automated factory using state-of-the-art the water/plumbing industry and inner groove copperhandling. tubing forThis the fully ACRintegrated air conditioning and melting/casting refrigeration industry. technology in all aspects of production and material plant from to finish product uses cast andwere roll technology produce 1815 by metric tons (4,000,000 pounds) per monthincluding of the highest copper tube for All machines produced into2001 or newer the world's best known manufacturers, SMS,quality MRB Schumag, the water/plumbing industry and inner groove copper tubing forproduction the ACR air conditioning and refrigeration Induga Furnaces, and Asmag material handling systems. The flow is computer controlled, and industry. all product travels from machine-were to-machine in in payoff that controlled. All machines produced 2001baskets or newer byare the CNC world's best known manufacturers, including SMS, MRB Schumag, Induga Furnaces, Asmag material handling systems. Themodern production flow is computer controlled, andofallnew. product travels This is an excellentand opportunity to purchase the world's most technology at a fraction of the cost The sale from machineto-machine in payoff that areallCNC controlled. are available for technical support and spare parts. includes all necessary hardware andbaskets software, and manufacturers This is an excellent MACHINES opportunity toWILL purchase world's most modern technology at a IS fraction of the cost of NO INDIVIDUAL BE the SOLD SEPARATELY. THIS PLANT BEING SOLD ASnew. A The sale includes all necessary hardware and software, and all manufacturers are available for technical support and spare parts. COMPLETE PLANT ONLY FOR EXPORT OUTSIDE OF NORTH AMERICA.

NO INDIVIDUAL MACHINES WILL BE SOLD SEPARATELY. THIS PLANT IS BEING SOLD AS A COMPLETE PLANT ONLY FOR EXPORT OUTSIDE OF NORTH AMERICA.

INDIVIDUAL MACHINE CHARACTERISTICS SMS MEER HORIZONTAL CONTINUOUS CASTING PLANT SCHUMAG MODEL RFS STRAIGHTEN, CUT, COIL, TEST & CHARACTERISTICS SMS Meer Cathode Charging System INDIVIDUAL MACHINEMARKING FINISHING MACHINE Two 900 kW, 8 Ton Induga Channel Melting Furnaces Tube size: 6mm - 30mm (0.236" - 1.18") SMS CONTINUOUS CASTING PLANT 350MEER kW, 10HORIZONTAL Ton Induga Pressurized holding furnace (and spare furnace) SCHUMAG MODEL RFS STRAIGHTEN, CUT, COIL, TEST & SMS Charging System MARKING FINISHING MACHINE SMS Meer Meer Cathode Four Strand Withdrawal Train with two separate withdraw 2134mm (84") SMS MEER SPINNER BLOCK Two 900 8 Ton101mm Induga(4") Channel Tube - 30mm drives to kW, produce tube Melting Furnaces Modelsize: No.:6mm 45 TVC 2000(0.236" - 1.18") 350 kW, 10 Ton Induga Pressurized holding furnace (and spare furnace) Maximum Tube Weight: 1080 Kg (2381 Lbs.) Maximum shell: 35mm x 1.75mm (1.378" x 0.070") Wall SMS Meer Four Strand Withdrawal Train with two separate withdraw 2134mm SPINNER Speed: (84") 250 - SMS 1500 MEER m/min (820 - 4920BLOCK FPM) drives to produce 101mm (4") tube Model No.: 45 TVC 2000 SMS MEER TUBE MILLING MACHINE Maximum Tube Weight: 1080 Kg (2381 Lbs.) Maximum shell:IN-LINE 35mm xCOIL 1.75mm (1.378" x 0.070") Wall INDUCTOHEAT TO COIL ANNEALING FURNACE Speed: 250 - 1500 m/min (820 -(0.35" 4920 -FPM) SMS MEER HRM 100 HIGH REDUCTION MILL Tube diameter: 9.0mm - 10mm 0.40") SMS MEER MILLING Main drive:TUBE 2 x 428kW (574MACHINE HP) DC Wall: 0.21mm - 0.6mm (0.008" - 0.0236") INDUCTOHEAT IN-LINE (984 COILFPM) TO COIL ANNEALING FURNACE Superimpose drive: 1 x 428 kW (574 HP) DC Line speed: 300m/min. SMS MEER HRM- 100 HIGH REDUCTION MILL Tube diameter: 9.0mm - 10mm (0.35" - 0.40") Feed: 1194mm 1270mm/Min. (47 - 50 ipm) @ (4" O.D. shell x 1" wall) Main drive: x 428kW (574Ft.) HP) DC x 57mm (2.25") O.D. x 3.175mm Wall:SCHUMAG 0.21mm - 0.6mm 0.0236") Output tube2is: 201m (660 Long MRB MODEL(0.008" VNVG- 2000 INNER GROOVING Superimpose Line speed:(4300m/min. (984 FPM) (0.125") Wall drive: 1 x 428 kW (574 HP) DC MACHINES ea) Feed: - 1270mm/Min. (47 - 50inipm) O.D. shell x 1" wall) 907 Kg1194mm (2,000 Lbs.) shell is processed 13 -@14(4" minutes. Draw force maximum: 8 kN Output tube is: 201m (660 Ft.) Long x 57mm (2.25") O.D. x 3.175mm MRB SCHUMAG MODEL VNVG 2000 INNER GROOVING Maximum Speed: 125m/Min. (410 FPM) (0.125") Wall MACHINES (4 ea)Grooving Speed: 100m/Min. (325 FPM) SCHUMAG MODEL IIB/12 AND IIB/8 DOUBLE COMBINED DRAWING Maximum Inner 907 Kg (2,000 Lbs.) shell is processed in 13 - 14 minutes. Draw forceinlet: maximum: 8 kN MACHINE Maximum 16.3 mm O.D. (0.642") Maximum Speed: 125m/Min. (410 FPM) 12.7mm - 6.35mm (1/2" - 1/4") Tube size: 54mm (2.125") at entry Range of inner groove tube processing: SCHUMAG MODEL IIB/12 AND IIB/8 DOUBLE COMBINED DRAWING Maximum Inner Grooving Speed: 100m/Min. (325 FPM) 48mm (1.9") after first draw O.D. MACHINE 38mm (1.525") after second draw Maximum inlet:45000 16.3 mm O.D. (0.642") Motor: 37 kW, RPM ultra-high speed levitation motor Tube size: 54mm (2.125") at entry Range of 4inner groove tube processing: 12.7mm - 6.35mm (1/2" - 1/4") Quantity: separate lines 48mm (1.9") first draw O.D. SCHUMAG MODEL IID/5after INTERMEDIATE COMBINED DRAWING Motor: 37 kW, 45000 RPM ultra-high speed levitation motor MACHINE 38mm (1.525") after second draw EFCO ROLLER HEARTH ANNEALING FURNACE Quantity: 4 separate lines Maximum Entry O.D.: 43mm (1.692") SCHUMAG MODEL INTERMEDIATE COMBINED DRAWING Typical Entry Size: IID/5 38.7mm (1.525") SCRAP CHOPPER MACHINE EFCO ROLLER HEARTH ANNEALING FURNACE Typical Exit Size: 28.5mm (1.125") Maximum Entry O.D.: 43mm (1.692") PACKAGING LINE Typical Entry Size: KZ-P-IIID 38.7mm (1.525") SCRAP CHOPPER line made by Smurfit-Stone Container Systems SCHUMAG MODEL COMBINATION DRAWING & This semi-automated Typical Exit Size: 28.5mm (1.125") FINISHING MACHINE receives coils directly from the annealing furnace via conveyor. It places PACKAGING LINE Tube Size Range: 22mm - 47.6mm (0.875" - 1.875") the coil on a pre-formed box, folds the box and glues it. It then stacks SCHUMAG This semi-automated line made by Smurfit-Stone Container Systems Cut length:MODEL KZ-P-IIID COMBINATION DRAWING & boxes and wraps the stack with plastic. FINISHING MACHINE receives coils directly from the annealing furnace via conveyor. It places Straight: 3m or 6m (10 Ft. or 20 Ft.) Tube Range: 22mm 47.6mm (0.875" - 1.875") the coil on a pre-formed box, folds the box and glues it. It then stacks Coils:Size 15.25m - 30.5m (50 -Ft. - 100 Ft.) ASMAG COMPUTER CONTROLLED BASKET STORAGE AND Cut length: boxes and wraps the stack with plastic. RETRIEVAL SYSTEM Straight: 3m or 6m (10 Ft. or 20 Ft.) Coils: 15.25m - 30.5m (50 Ft. - 100 Ft.) ASMAG COMPUTER CONTROLLED BASKET STORAGE AND Contact: JohnRETRIEVAL ConroySYSTEM

john@machyintl.com Tel: (+1)-203-484-0400 Contact: John Conroy john@machyintl.com Tel: (+1)-203-484-0400 For a list of other tube, wire and strip factories for sale plus over 700 individual

machines in stock, visit our website at www.machyintl.com For a list of other tube, wire and strip factories for sale plus over 700 individual machines in stock, visit our website at www.machyintl.com


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.