Supply Post April 2020 by Supply Post Newspaper

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER · SUPPLYPOST.COM

Scan for more info

Family Owned Since 1971

VOL. 49 · NO. 4

APRIL 2020

2013 TEREX TA400

2015 MORMAK BUILT MVP450 PLANT

3,102 hrs. Stock # 15E3106. Langley, BC. $238,000. See page 24 for more.

Rebuilt cone, recent inspection, exc. cond., off plant infeed conveyor with magnet included, twin 200 hp cone drive motors. $385,000 OBO. See page 33 for more details.

INLAND GROUP · 604-607-0300 langleysales@inland-group.com

HUGH: 604-657-7167 WILLIE: 780-474-8082

PLACER CLAIMS — TIMED AUCTION

12 claims near Rosella Creek, BC, includes all equipment. +\-1185.56 ha / 2929.59 acres. Bidding is open 10am July 15 to 5pm July 22. See page 35 for equipment list. MORE INFO AT TEAMAUCTIONS.COM OR JOE SENTES: 780-886-7033

2016 HYUNDAI HX3300L

with SouthStar QS630 processor. 8303 hours, great condition, ready to work. $329,000 CAN $249,000 USD. See page 35 for more info. WOODLAND EQUIPMENT 250-372-2855

ConExpo-Con/Agg 2020: Success Despite Challenges

CONEXPO/CON-AGG

Equipment industry in the U.S. remains optimistic, despite concerns about COVID-19. Read more on page 52.

NEW OEM COMPONENTS with VANDERVELDT EQUIPMENT PARTS LTD.

HUGE PRICE SAVINGS

250-951-2082

Page 2

Supply Post · supplypost.com

April 2020

RENTALS • SALES • CONTRACTING SALES & RENTALS: Dave 778-855-4190 dave@unitedearthcontractors.com OFFICE: 604-940-0001 | Fax 604-940-0005

SALE PRICE $74,000 ea.

$90,000 ea. 1 OF 2 UNITS AVAILABLE. 2007 KOMATSU HM 300-2 Approx.11-12 k hrs on each. Good runners, ready to work.

$59,000 JD 350D, thumb, guarded, catwalks, 12K hours.

SALE PRICE $94,000 EA 1 of 2 - JD 450D, thumb, guarded, catwalks, 2 buckets 12K hours.

D L SO

$79,900

2003 CAT 140H MOTOR GRADER 9,200 hrs, tires at 90% plus. This is one great unit and ready to work.

2006 FINLAY 883 SCREENING PLANT SALE $93,000

SOLD 2011 EASYSTAK 80’ TRACK CONVEYOR $75,000 2003 VIBROMAX 84” Padfoot compactor Stk# CP140 ..................................................... $30,000. 2012 VIBROMAX VM 132 84” roller 3500 hrs Stk # CP212 ....................................................SOLD $50,000. 2001 VIBROMAX w1105PD padfoot compactor 4000 hrs Stk # CP208 .................................... $34,000. 2008 BOMAG BW211D-40 compactor Stk# CP88 ....................................................... $45,000. 2001 CAT CP563D compactor 6600 hrs Stk# CP210 .................................................... $40,000. 2000 INGERSOLL-RAND 84” compactor Stk# CP206 .................................................... $34,000. 2007 LINK-BELT 290 X2 EXCAVATOR 11000 hrs Stock # EX214 ............................... $84,000. 2012 CAT 336EL EXCAVATOR 8500 hrs Stk# EX222 .................................................. $165,000. 2011 CAT D6K DOZER Stock # DZ162 .. $110,000. 2014 YANMAR SKID-STEER 1200 hrs Stk# LD072 ....................................................SOLD $30,000. 2012 VOLVO A35F ROCK TRUCK 7500 hrs Stk# AT240 ................................................... $230,000. 2012 VOLVO A35F ROCK TRUCK 7100 hrs Stk # AT250 .................................................. $230,000. 2007 CAT 950H LOADER 23k hours Stk # LD074 ................................................... $65,000. 2012 CAT 966H LOADER 15k hours Stk # LD070 .................................................. $140,000. 2001 CAT 980G LOADER Stk# LD174 .... $85,000. 2015 JOHN DEERE 850K LGP CRAWLER TRACTOR 5400 hrs Stk# DZ176 .............. $350,000. 2014 JOHN DEERE 850K WLT CRAWLER TRACTOR 5600 hrs Stk# DZ174 ............... $350,000.

1 OF 4 VOLVO A25C, All in good condition and ready to work Very very clean units.

4 available JD 350G GP & dig bucket, U/C 90%, pads look new. Starting at $150,000.

$79,000 JOHN DEERE 240D 8,200 hrs, W/B lugging and Q/C, new U/C, Good runner and ready to work.

$105,000 2011 CAT 160M MOTOR GRADER 13,000 hrs, tires at 85% and machine is ready to work.

SALE PRICE

$230,000 EA 2014 VOLVO A30F 80% tires, 750/65R25 wide tires, rear camera, approx. 9,000 hours and ready to work. (1 of 2)

$129,000 2008 CAT D6T 6 WAY A/C, diff steer, SystemOne U/C, ripper/forestry pkg avail. hard nose & front end all rebuilt. Only 14,000 hrs. Min. hrs on rebuilt engine.

$75,000 2005 D6R XL U/C 75% good runner, well maintained and ready to work.

$140,000 VOLVO A25F Approx 10k hours, Tailgate , new brakes , new tranny

$145,000 VOLVO A25G 1 OF 6, 3-5K HOURS

CAT 740 ROCK TRUCK C/W Hyd water tank drop in

STARTING AT $300,000.

FIND MORE AT UNITEDEARTHCONTRACTORS.COM

April 2020

Supply Post · Our Readers Are Your Buyers

Page 3

4204 42 Ave., Innisfail, AB

CALL TODAY! 1-844-470-4608

2012 CATERPILLAR 226B3 SKID STEER, STK #2469, (CAT) Diesel, Enclosed Cab, Heat, Aux. Hydraulics, 61 HP, Hand/ ISO Controls, Solid Rubber Tires, Counter Weights, 1,500lb Lift, 1,476 Hrs............................................................................$31,000.

2014 CATERPILLAR 246DSKID STEER, STK #1638, Enclosed Cab, (CAT) Diesel, Heat, Air, Ride Control, Hyd. Quick Connect, Positive Air Shut Off, 74 HP, 2,150lb Lift, Counter Weights, 1,135 Hrs ..........................................................$42,500.

2014 CATERPILLAR 262D SKID STEER, STK #1676, Enclosed Cab, (CAT) Diesel, Heat, Air, Ride Control, Hyd. Q/C, Positive Air Shutoff, 74HP, 2,700lb Lift Capacity, Counter Weights, 1,983 Hrs .............................................................................$45,000.

2014 BOBCAT S550 SKID STEER, STK #2353, Enclosed Cab, (Kubota) Diesel, Heat/Air, Aux. Hydraulics, Hand/Foot Controls, 61 HP, 1,750lb Lift, 3,631 Hrs ......................$29,500.

2011 JCB 550-170 TELEHANDLER, STK #2517, 4WD, (JCB) Diesel, Enclosed Cab, Heat, Air, 109 HP, 54’ Lift Hgt., 41’ Horz. Reach, 3-Way Steering, Frame Tilt, Positive Air Shutoff, Counter Weights, Outriggers, 10,000lb Lift, 9,778 Hrs$67,500.

2012 JCB 512-56 TELEHANDLER, STK #2499, 4WD, (JCB) Diesel, Enclosed Cab, Heat, Air, 109 HP, 56’ Lift Hgt., 42’ Horz. Reach, 3-Way Steering, Frame Tilt, Counter Weights, Outriggers, 12,000lb Lift, 7,745 Hrs .............................$79,500.

2007 SKYTRAK 8042 TELEHANDLER, STK #2312, 4WD, (Cummins) Diesel, Enclosed Cab, Heat, 100 HP, 42’ Lift Hgt., 26’ Horz. Reach, Positive Air Shutoff, Frame Tilt, 3-Way Steering, 8,000lb Lift, 7,740 Hrs......................................$42,500.

2012 XTREME XR1255 TELEHANDLER, STK #2345, 4WD, Enclosed Cab, (Perkins) Diesel, Block Heater, Heat, Fan, Aux. Hyd., 55’ Lift Hgt., 38’ Horz. Reach, 3-Way Steering, Frame Tilt, Outriggers, Pos. Air Shutoff, Counter Weights, 12,000lb Lift, 2,005 Hrs ..........................................................................$102,500.

2012 JLG G10-55A TELEHANDLER, STK #2466, 4WD, (Cummins) Diesel, Encl. Cab, Heat, Air, 125 HP, Aux. Hyd., 55’ Lift Hgt., 42’ Horz. Reach, Positive Air Shutoff, 3-Way Steering, Frame & Carriage Tilt, Counter Weights, Outriggers, 10,000lb Lift, 7,032 Hrs....................................................................$73,500.

2011 JOHN DEERE 544K WHEEL LOADER, STK #2495, (JD) Diesel, Enclosed Cab, Heat, Air, Heated Seat, 176 HP, 2-Spd., Aux. Hydraulics, Q/C, Positive Air Shutoff, Counter Weights, Forks, 110” Bucket, 10,550 Hrs ...................$97,500.

2009 CASE 1221E WHEEL LOADER, STK #2351, Enclosed Cab, (Cummins Diesel), 4-Spd., Heat, Air, Ride Control, Emergency Steering, 335 HP, 132” Bucket, 7,340 Hrs ...........................................................................................$131,500.

2008 KOMATSU WA200 WHEEL LOADER, STK #2441, Enclosed Cab, (Komatsu Diesel), Heat, Air, 4-Spd., Aux. Hydraulics, Positive Air Shut Off, Quick Connect, 127 HP, 11,054 Hrs ..............................................................................................$59,500.

2008 CATERPILLAR 287C XPS SKID STEER, STK #2455, (Mitsubishi Diesel), Enclosed Cab, Heat, Air, 2-Spd, Hi Flow, Aux. Hydraulics, Quick Connect, 84 HP, 3,800lb Lift, 4,952 Hrs........................................................................................$33,000.

2017 CATERPILLAR 239D SKID STEER, STK #2435, Enclosed Cab, (Cat) Diesel, Heat, Aux. Hydraulics, Backup Camera, Quick Connect, Hand Control, 67 HP, 2,050lb Radial Lift, 306 Hrs ...............................................................................$59,500.

2017 CATERPILLAR 279D SKID STEER, STK #2223, Enclosed Cab, (CAT) Diesel 3.3L, Heat, Air, 2-Speed, Aux. Hyd., Quick Connect, Ride Control, Hand/Foot Control, 72HP, 3,000lb Lift, 870 Hrs .........................................................................$77,500.

2015 BOBCAT T590 SKID STEER, STK #2436, Enclosed Cab, (Kubota) Diesel, Heat, Air, 2-Speed, Auxiliary Hydraulics, Quick Connect, ISO/H Pattern, 66 HP, 2,100lb Lift, 2,198 Hrs ...........................................................................$39,500.

2005 CATERPILLAR 304CR MINI EXCAVATOR, STK #2457, (Mitsubishi Diesel), Enclosed Cab, Heat, 2-Spd., Aux. Hydraulics, 36 HP, 50” Cleanup Bkt., 11” Tooth Bkt., 78” Blade, 11’ Dig Depth, 4,885 Hrs ................................................$33,500.

2013 TAKEUCHI TB250 MIDI EXCAVATOR, STK #2504, (Yanmar Diesel), Enclosed Cab, Heat, Air, 2Spd., Aux. Hydraulics, Hyd. Thumb, 38 HP, 23” Tooth Bkt., 36” Smooth Bkt., 72” Blade, 11’ Dig Depth, 1,651 Hrs............................$46,500.

2013 TAKEUCHI TB235C MINI EXCAVATOR, STK #2439, (Yanmar) Diesel, Enclosed Cab, Heat, 2-Spd., Aux. Hydraulics, Hyd. Thumb, 30 HP, 24” C/ U Bucket, 19” Tooth Bucket, 11’ Dig Depth, 2,240 Hrs...................................$37,500.

2012 TAKEUCHI TB285 MIDI EXCAVATOR, STK #2510, (Yanmar) Diesel, New Engine, Enclosed Cab, Heat, Air, 2-Spd., Aux. Hyd., Hyd. Thumb, 69 HP, 22” Tooth Bkt., 46” Smooth Bkt., 91” Blade, 15’ Dig Depth 3,438 Hrs....................................... $56,500

2011 GENIE S65 STRAIGHT BOOM LIFT, STK #2291 – 4WD (Deutz) Diesel, Block Heater, 65’ Platform Height, 56’ Horizontal Reach, 8’ Platform, Foam Filled Tires, 500lb Lift, 4,301 Hrs..............................................................................$62,500.

2012 GENIE S65 STRAIGHT BOOM LIFT, STK #2289, 4WD, (D) Diesel, Block Heater, 65’ Platform Height, 56’ Horizontal Reach, 8’ Platform, PAS, Foam Filled Tires, 500lb Lift, 3,873 Hrs............................................................................$63,500.

2011 VOLVO BL70 BACKHOE, STK #2309, (Volvo Diesel), 4WD, Enclosed Cab, Heat, Air, Aux. Hydraulics, Outriggers, Extend-A-Hoe, 94 HP, 92” Front Bkt., 21” Rear Dig Bkt., 14’ Dig Depth, 3,239 Hrs................................................................$56,500.

2005 CASE 580M TURBO SII, STK #2236, (Case Family III 445/M2 Diesel), Heat, Air, Extend-a-Hoe, Aux. Hyd., Outriggers, Ride Control, 80 HP, 82” Loader, 17” Tooth Rear Dig, 6,124 Hrs............................$46,500.

FOR COMPLETE INVENTORY www.groundhogsales.com

Page 4

Supply Post Â· supplypost.com

April 2020

Supply Post Â· Our Readers Are Your Buyers

www.morookacarriers.com

1-877-667-6652

e s lin art ll fu a p s! k r a oo ack r fe r of Mo r t e e W EM bb O ru & of

WE KEEP CANADA ON TRACK

Page 5

Page 6

Supply Post · supplypost.com

Riverside Equipment Rentals

1-800-556-0557

April 2020

ADVERTISERS INDEX Alberta Engine ................... 33 Edmonton Trailer ............... 45 Lonetrack Equipment ... 29, 39 Ritchie Bros....................... 23 Amix Group ....................... 37 Elrus ................................. 32 LSW Wear Parts ................. 14 Riverside Equipment ............ 6 Arrow-West ........................ 17 Equip. Sales & Service ...... 19 Magnum Attachments........ 21 Asher Creek Equipment ..... 38 FCL Financial..................... 16 Major Equipment ............... 38 Rollins .............................. 19 Banning Equipment ........... 37 Foreman Equipment .......... 25 Merlin Gise ........................ 36 Royquip ............................ 38 B & G Parts ....................... 18 ForesTech Equipment ........ 11 Milk Ranch ........................ 38 Saratoga Ventures ............. 22 Bob’s Diesel ...................... 33 Gear Centre ....................... 11 Milron ................................. 4

RENTALS | Daryl: 604-309-3980 | daryl@riversideequipment.com

Brandt......................... 12, 13 General Aggregate ............. 28 Mormak ............................ 31

SALES | Ernie: 604-854-0583 | ernie@riversideequipment.com

Brandt Truck Rigging .......... 42 Groundhog Sales & Rentals . 3 Morooka ............................. 5

“Locally Owned & Operated”

RLC Aggregate ................... 31

Sexsmith ........................... 36

Shiloh Enterprises ............. 21

Brandt Value Parts............. 22 Groundworx ................. 28, 30 Mountain Forestry Equip. ... 10 Skreenquip........................ 26 Brikers ................................ 8 Handlers Equipment .......... 18 Mountainside Equipment ... 38 Trak Tech........................... 16 Brown International ........... 34 Hope Mechanical .............. 34 Nor Mar Industries ............. 15 True North Equipment ........ 36

WE RENT:

Brutus Truck Bodies ........... 15 Infinity West ...................... 35 Norstone Excavating .......... 19

Tyalta ................................ 40

Champion Assets .............. 10 Inland Equipment ................ 9 Ocean Trailer ..................... 56 United Earth Contradtors ..... 2 Chieftain Equipment .... 29, 39 Inland Group ..................... 24 Pacific Rim Equipment......... 7 Vanderveldt Parts ................ 1 Coastal Pacific Equipment . 35 Interior Diesel .................... 21 PM Industries .................... 47 Van-Ed Equipment ............. 16 Continental Equipment ...... 17 InterQuip Rentals............... 20 Premium Truck ......48, 49, 50 ConTrac Equipment ........... 27 Jade Equipment .................. 1 Prince George Truck ........... 37 Crawler Sales .................... 20 K-Line Trailers ................... 43 Prolenc ............................. 44

Wally’s Private Parts .......... 34

Warners HD Parts .............. 35

Darby Mfg. ........................ 14 Langley Excavator Parts ..... 10 P & R Truck Centre ............ 41 WRT Equipment ................. 30 Dolphin Mechanical ........... 33 LNH Equipment ................. 36 Ramsey Co. ....................... 21 Wyatt’s Used Equipment .... 37

NEXT DEADLINE: Friday, April 17, 2020

Scan for more info #105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5

www.supplypost.com

PHONE 604-607-5577 | TOLL FREE 1-800-663-4802

NEW TO THE FLEET

VOLVO A30G

President ........................................... Jeff Watson

Marketing Administration ................... Sheryl Kaye

Account Manager ............................Jake Peterson

Art Director/Social Media ................... Linda Horn

Managing Partner, Finance ............ Debra Watson

Web & Graphic Designer ..................Lisa Schmale

CIRCULATION

Direct Mailed copies .............. 14,200 Newsstand copies .................... 2,200 Total distribution .................... 16,400 Please call our office for full details

Published Monthly - Printed in Canada Publications Mail Agreement No. 40070144 Reproduction of any material including photographs and/or advertisements in whole or in part is forbidden.

The Supply Post is a proud member of the following Trade Associations:

INTERIOR LOGGING ASSOCIATION

3112 Pratt St., Abbotsford, BC V2S 3C7 | Fax 604-556-0559

www.riversideequipment.com

RETURN UNDELIVERABLE CANADIAN ADDRESSES TO CIRCULATION DEPT.: (Covers/Labels Only)

No. 105, 26730 - 56th Avenue, Langley, BC V4W 3X5

April 2020

Supply Post · Our Readers Are Your Buyers

Page 7

Phone: 250-493-4545 Fax: 250-493-8819 AFTER HRS, Joe Hewer: 250-490-6795 AFTER HRS, Dave Garnett: 250-490-7976

1698 Dartmouth Rd, Penticton, BC V2A 4B8

RENT OR RENTAL PURCHASE AVAILABLE

2018 HITACHI ZX120-6 20" PADS, AIR, ONLY 1,241 HOURS

2017 YANMAR SV100-2A CAB AIR, STEEL PADS, HYD THUMB 2 BKTS, 934 HRS, 23,000 LB MACHINE W/BLADE YANMAR EXCAVATORS RENT, RENT TO OWN, LEASE OR BUY

NEW YANMAR SV08-1B CANOPY, RUBBER, 14" BKT, 2'3"-2'9" WIDE ......................CALL NEW YANMAR VIO17-A CANOPY, RUBBER, DIG BKT .................................................CALL 4 YANMAR VIO35-6A RUBBER, CANOPY, HYD QUICK CHANGE ..................................CALL 4 YANMAR VIO50-6A CAB AIR RUBBER TRACKS, HYD Q/C, DIG BKT .........................CALL NEW YANMAR VIO50-6A CAB AIR STEEL TRACKS, HYD Q/C, DIG BKT ......................CALL 5 YANMAR VIO55-6A CAB AIR STEEL TRACKS, HYD Q/C, DIG BKT ............................CALL 2 YANMAR VIO80-1A STEEL, CAB AIR, BLADE, HYD Q/C, DIG BKT 0 HRS ..................CALL 4 YANMAR SV100-2A RUBBER TRACKS, CAB, AIR HYD Q/C, DIG BKT .......................CALL

2014 HITACHI ZH200-5B 32" PADS, AIR, HYBRID MACHINE, ONLY 1,765 HRS ...........CALL 2014 HITACHI ZX210LC-5N 24" PADS, AIR, Q/C, HYD THUMB, ONLY 2,951 HRS . $165,000 2006 HITACHI ZX225US-3 24" PADS, AIR, 7,596 HRS ...............................................CALL 2011 HITACHI ZX225USR-3 24" PADS, AIR, ONLY 6,170 HRS ....................................CALL 2018 KOMATSU PC200LC-8 32" PADS, A/C, Q/C, HYDRAULIC THUMB ...............FOR RENT NEW HITACHI ZX200LC-5 24" PADS, AIR COND, 2 BKTS & Q/C, 225 HRS ..........FOR RENT 2018 HITACHI ZX200LC-5 24" PADS, A/C, Q/C, HYD THUMB, PLUMBED FOR HAMMER, GUARDED, 507 HRS ............................................................................................FOR RENT 2017 DEERE 245G LC 32" PADS, 2 BKTS Q/C, HYDRAULIC THUMB, 2,226 HRS .........CALL 2017 DEERE 245G LC 32" PADS, 2 BKTS Q/C, HYDRAULIC THUMB, 682 HRS ....FOR RENT 2017 DEERE 245G LC 32" PADS, 2 BKTS Q/C, HYD THUMB, CABGUARD, 1,565 HRS ..........................................................................................................................FOR RENT 2018 DEERE 245G LC 32" PADS, 2 BKTS, Q/C, HYD THUMB, CABGUARD, 261 HRS ...........................................................................................................................FOR RENT 2018 DEERE 245G LC 32" PADS, Q/C, PRO LINK THUMB, CABGUARD, 8.8 HRS ..FOR RENT 2018 DEERE 245G LC 32" PADS, Q/C, HYD THUMB, 2 BKTS ..............................FOR RENT 2018 DEERE 245G LC 32" PADS, 2 BKTS, Q/CHANGE, 1212 HRS .......................FOR RENT 2019 DEERE 245G LC-6 32" PADS, Q/C HYD THUMB, WRIST BUCKET, 91 HRS ..FOR RENT 2019 DEERE 245G LC-6 32" PADS, Q/C, HYD THUMB, 493 HRS ........................FOR RENT 2018 CAT 323 28" PADS, AUX HYDS, HEAD & FRONT CABGUARDS, LIKE NEW COND, ONLY 974 HOURS.................................................................................................................CALL 2008 KOMATSU PC220LC-8 32" PADS, AIR, 2 BKTS, HYD THUMB, ONLY 4,750 HRS .CALL 2015 HITACHI ZX250LC-6N 32" PADS, AIR, AUX HYD, ONLY 1,483 HRS .....................CALL 2015 DEERE 2454D ROADBUILDER, HYD THUMB, HIGH WALKER, 7" RISER, AUX HYDRAULICS, 6,267 HRS ............................................................................................CALL 2018 VOLVO EC300EL 32" PADS, 12' ARM, AUX HYD, Q/C, HYD THUMB, 1,098 HRS, CABGUARD, WRIST BUCKET, DIG, CLEAN UP BKTS (3) .................................................CALL 2012 HITACHI ZX350LC-5 32" PADS, AIR, DIG BKT, ONLY 6,230 HOURS ............. $124,900 2012 HITACHI ZX350LC-5N 32" PADS, AIR, Q/C, PRO LINK THUMB, 5,358 HRS .........CALL 2018 DEERE 345G LC 32" PADS, AIR, HYD THUMB, Q/C, 2 BKTS .......................FOR RENT NEW HITACHI ZX330LC 24" PADS, AIR, HYD THUMB, B/NEW .............................FOR RENT 2014 CAT 336E L 32" PADS, Q/C, DIG BKT, 4,345 HRS ....................................... $169,900 2019 CAT 336 28" PADS, AIR COND, NEXT GEN, ONLY 1,933 HOURS .........................CALL 2013 KOMATSU PC360LC-10 32" PADS, AIR, Q/C HYD THUMB, CABGUARD, 3,900 HRS ............................................................................................................................ $239,000 2015 HITACHI ZX470LC-5B 24" PADS, AIR, ONLY 4,440 HRS ................................... SOON

EXCAVATORS

DOZERS

NEW YANMAR SV08-1B CANOPY, RUBBER, 14" BKT, 2'3"-2'9" WIDE, 21.9 HRS ......CALL 2 YANMAR VIO17-A CANOPY, 2 BKTS, HYD THUMB, 147-213 HRS ...........................CALL NEW YANMAR VIO25-6A RUBBER, CANOPY, HYD THUMB, 2 BKTS ............................CALL 2019 YANMAR VIO35-6A RUBBER, CANOPY, HYD THUMB, 2 BKTS, 165 HRS ............CALL 2019 YANMAR VIO35-6A CAB AIR RUBBER, HYD THUMB, 2 BKTS, 121 HRS .............CALL 2019 YANMAR VIO35-6A CAB AIR RUBBER, HYD THUMB, 2 BKTS, 126 HRS .............CALL 2020 YANMAR VIO35-6A CAB AIR RUBBER, HYD THUMB, 2 BKTS, 28.6 HRS ............CALL NEW YANMAR VIO35-6A CAB AIR RUBBER, HYD THUMB, 2 BKTS ............................CALL NEW YANMAR VIO35-6A CAB AIR STEEL (BOR), HYD THUMB, 2 BKTS ......................CALL NEW YANMAR VIO35-6A CAB AIR RUBBER, ANGLE BLADE, HYD THUMB, 2 BKTS .....CALL NEW YANMAR VIO35-6A CAB AIR RUBBER, HYD THUMB, 2 BKTS, NEW ...................CALL 2019 YANMAR VIO50-6A STEEL, CAB AIR, A BLADE, 2 BKTS, HYD THUMB, 508 HRS CALL 2020 YANMAR VIO50-6A RUBBER, CAB AIR, HYD THUMB, 2 BKTS, 132 HRS ............CALL 2019 YANMAR VIO50-6A RUBBER, CAB AIR, HYD THUMB, 2 BKTS, 490 HRS ............CALL 2019 YANMAR VIO50-6A RUBBER, CAB AIR, HYD THUMB, 2 BKTS, 425 HRS ............CALL 2019 YANMAR VIO50-6A RUBBER, CAB AIR, HYD THUMB, 2 BKTS, 209 HRS ............CALL 2012 YANMAR VIO55-5B RUBBER CAB AIR, HYD THUMB, 2 BKTS, 5,231 HRS ..........CALL NEW YANMAR VIO55-6A CAB AIR RUBBER TRACKS, HYD THUMB, 2 BKTS ...............CALL 2019 YANMAR VIO80-1A STEEL BOR, BLADE, HYD THUMB, 2 BKTS, 219 HRS .........CALL 2019 YANMAR SV100-2A STEEL, HYD THUMB, 2 BKTS, 497 HRS ............................CALL 2019 YANMAR SV100-2A STEEL, HYD THUMB, 2 BKTS, BREAKER, PLMB, 397 HRS .CALL NEW YANMAR SV100-2A STEEL CAB AIR, HYD Q/C, 2 BKTS, 294 HRS .....................CALL

BRAND NEW YANMAR EXCAVATORS IN STOCK MORE ARRIVING DAILY

2005 HITACHI ZX75US-A 18" PADS, AIR, BLADE, 3,285 HRS ....................................CALL 2008 HITACHI ZX75US-3 18" PADS, AIR, Q/C BUCKET, 4,902 HRS ............................CALL 2010 HITACHI ZX75US-3 BLADE, Q/C 2 BKTS, HYD THUMB, ONLY 1,758 HRS ..........CALL 2015 CAT 308E2 CR 18" BOR, AIR, BLADE, ONLY 102 HOURS .............................. $96,900 2016 CAT 308E2 CR 18" BOR, AIR, BLADE, ONLY 700 HRS .......................................CALL 2018 CAT 308E2 CR 18" BOR, AIR, BLADE, RVC, ONLY 171 HRS ...............................CALL 2016 KOMATSU PC78US-10 18" BOR, L.ARM, Q/C HYD THUMB, 1,118 HRS ....FOR RENT 2014 CAT 311FL RR 20" PADS, BOLT ON RUBBER, ONLY 1,262 HRS ........................CALL 2010 CAT 312D 20" PADS, HYD Q/C, HYD THUMB, ONLY 2,900 HRS ................... SPECIAL 2011 HITACHI ZX120-3 20" PADS, AIR, ONLY 4,220 HRS .........................................CALL 2018 CAT 312F 20" PADS, BLADE, Q/C HYD THUMB, ONLY 984 HRS .................FOR RENT 2019 CAT 312F GC 20" PADS, AIR COND, ONLY 4 HRS (NEW) ...................................CALL 2017 CAT 313FL GC 20" PADS, AIR, BLADE, AUX HYDS, Q/C, 821 HRS ......................CALL 2002 HITACHI ZX135US 20" PADS, AIR, QUICK CHANGE, DIG, 13,713 HRS .......... $38,500 3 2005 HITACHI ZX135US 20" PADS, AIR, DIG BKT, 5,732-7,983 HRS ......................CALL 2005 HITACHI ZX135US 20" PADS, Q/C HYD THUMB, DIG BKT, 6,551 HRS ...............CALL 2008 HITACHI ZX135US BLADE, 2 BKTS, HYD THUMB, CABGUARD, 6,468 HRS ........CALL 2 2010 HITACHI ZX135US-3 20" PADS, AIR, BLADE, 6,557-7,231 HRS ....................CALL 2010 HITACHI ZX135US-3 20" PADS, AIR BLADE, 6,557 HRS ...................................CALL 2010 HITACHI ZX135US-3 20" PADS, AIR, ONLY 1,903 HOURS .................................CALL 2011 HITACHI ZX135US-3 20" PADS, AIR, ONLY 4,333 HRS .....................................CALL 2011 HITACHI ZX135US-3 28" PADS, AIR, BLADE, 4,685 HRS ..................................CALL 2011 HITACHI ZX135USK-3 AIR, HYD THUMB, Q/C 2 BKTS, 4,134 HRS ............. $103,500 2012 HITACHI ZX135US-3 28" PADS, AIR, ONLY 1,530 HRS .....................................CALL 2013 HITACHI ZX135US-3 28" PADS, AIR, L/A, ONLY 1,672 HRS ..............................CALL 2014 HITACHI ZX135US-3 20" PADS, AIR, Q/C, 2 BKTS, HYD THUMB, 1,558 HRS .....CALL 2014 HITACHI ZX135US-5 24" PADS, AIR, 9'11" ARM, 2,589 HRS,Q/C, DIG BKT ......CALL 2014 HITACHI ZX135US-5 20" PADS, AIR, 9'11" ARM, 3,600 HRS ............................CALL 2014 HITACHI ZX135US-5B 20" PADS, AIR, BLADE, ONLY 3,301 HOURS ..................SOON 2015 HITACHI ZX135US-5 20" PADS, AIR, 3,822 HRS, GRAPPLE BUCKET .................CALL 2014 HITACHI ZX135USK-5 20" PADS, Q/C, HYD THUMB, 2,920 HRS C/W V105E HYDRAULIC BREAKER ........................................................................................FOR RENT 2014 HITACHI ZX135US-5 20" PADS, BOR, L/A, Q/C, HYD THUMB, BLADE 2,051 HRS .........................................................................................................................FOR RENT NEW DEERE 135G 28" PADS, AIR, BLADE, HYD THUMB, 2 BUCKETS .........................CALL NEW DEERE 135G 28" PADS, AIR, BLADE, HYD THUMB, 2 BUCKETS .........................CALL NEW DEERE 135G 28" PADS, AIR, BLADE, HYD THUMB, 2 BUCKETS .........................CALL NEW DEERE 135G 28" PADS, AIR, BLADE, HYD THUMB, 2 BUCKETS .........................CALL 2014 KOMATSU PC138US-10 28" PADS, AIR, HYD THUMB, 2 BKTS, 2,100 HRS $124,900 2014 CAT 314E CR 20" PADS, Q/C, HYD THUMB, ONLY 2,336 HRS .................... $128,500 2016 CAT 314E LCR 24" PADS, BOR, Q/C HYD THUMB, ONLY 908 HRS .............FOR RENT 2016 HITACHI ZX180LC-6N 32" PADS, AIR, ONLY 2,602 HOURS ..............................CALL 2013 CAT 316EL 28" PADS, AIR,Q/C HYD THUMB, 2,342 HRS ............................ $159,900 2011 CAT 319DL 32" PADS, AIR, Q/C 36" BUCKET, AUX HYDS ............................. $49,900 2011 HITACHI ZX200LC-3 32" PADS, AIR, Q/C, HYD THUMB, AUX HYD, 9,360 HRS, CATWALKS, CABGUARD ............................................................................................CALL 2013 HITACHI ZX210LC-3 28" PADS, AIR, PIN GRABBER, HYD THUMB, 4,342 HRS ........................................................................................................................... $119,900

Authorized Dealer

$129,900

$132,900

$89,900

2014 KOMATSU D39PX-22 6 WAY, CAB AIR, ONLY 1,933 HRS, MS RIPPER (D5K SIZE) ...........................................................................................................................FOR RENT 2015 CAT D6K2 XL 6 WAY, CAB AIR, MS RIPPER, ONLY 2,051 HRS .............................CALL 2005 CAT D7R XR SII DAT BLADE, A/C CAB, D/STEER, RIPPER, 8,068 HRS, NEW CAT UNDERCARRIAGE, OIL SAMPLES,WORK ORDERS.................................................. $239,900 2014 KOMATSU D65PX-17 6 WAY DOZER, MS RIPPER, SWEEPS, ONLY 3,500 HRS ...........................................................................................................................FOR RENT

LOADERS, SKID STEERS

2018 YANMAR V4-7 CAB AIR, HYD Q/C, .85 CU YD BKT, 308 HRS ..............................CALL NEW YANMAR V4-7 CAB AIR, BOBTACH Q/C, .91 CU YARD BKT ...................................NEW NEW KOMATSU WA320PZ-6 20.5R TIRES, HYD COUPLER, E/S, 3.5 YD BKT/FORKS ...........................................................................................................................FOR RENT 2015 CAT 950K 23.5R TIRES, A/C, R/C, E/S, 4.32 YD BKT, ONLY 2,820 HRS ........FOR RENT 2017 KOMATSU WA380-8 23.5R TIRES, HYD Q/C, A/C, R/C, RVC, 1,907 HRS ...... $229,900 2016 BOBCAT MT55 MINI LOADER, ONLY 216 HRS, 44" BKT ...........................FOR RENT

APRIL SPECIAL $76,900

2012 HITACHI ZX290LC-5N 32" PADS, AIR, HYD THUMB, Q/C, 6,689 HRS 2015 BOBCAT T590 CAB AIR, SJC CONTROLS, 428 HRS ...................................FOR RENT NEW BOBCAT T650 CAB AIR, STD CONTROLS, PWR BOBTACH, 74" BKT ...........FOR RENT 2009 BOBCAT S70 CAB, Q/C BKT, ONLY 1,541 HRS ..........................................FOR RENT 2012 BOBCAT S70 CAB, Q/C BKT, AUX HYD, 1,165 HRS ............................................CALL 2013 BOBCAT S530 CAB, HYD Q/C, AUX HYD, 2 SPEED, 883 HRS, NEW TIRES ..........CALL 2 14/15 BOBCAT S590 HYD Q/C, A/C CAB, 2 SPEED, 558-899 HRS ..........................CALL NEW BOBCAT S590 CAB AIR, STD CONTROLS, 68" BKT ...................................FOR RENT 2013 BOBCAT S650 2 SPEED, HI FLOW, HAND/FOOT, A/C CAB, 1,547 HRS .......FOR RENT 2012 BOBCAT S850 A/C CAB, 84" BKT, 2 SPEED, 2,548 HRS ....................................CALL

GRADERS/COMPACTORS

1979 CAT 140G 14-24 TIRES, 14'MB, SNOW WING, 4,457 HRS ON METER ...............CALL 2003 CAT 140H VHP 14' MB, ACCUM, SNOW WING, A/C CAB, 14,00R24 TIRES .........CALL 2011 CAT 140M VHP PLUS 14' MB, ACCUM, A/C CAB, 5,334 HRS, 14R24 TIRES, C/W WOBBLY WHEEL COMPACTOR ............................................................................ $124,900 NEW CORNIVER CT40S 40" SMOOTH DRUM, KUBOTA ENG, FF TIRES ..............FOR RENT NEW CORNIVER CT48S 48" SMOOTH DRUM, KUBOTA ENG, FF TIRES ..............FOR RENT 2008 VOLVO SD25D 41" DRUM DRIVE, CANOPY, 1,300 HRS .....................................CALL 2011 VOLVO SD45D TF 54" DRUM, PF SHELL KIT, 945 HRS .............................FOR RENT 2005 ING. RAND SD70D TF 66" SMOOTH DRUM/SHELL KIT, CANOPY ................. $38,900 2012 VOLVO SD70D 66" DRUM, CAB AIR, ONLY 2,528 HRS ......................................CALL 2 2014 VOLVO SD75 66" DRUM DRIVE, CAB AIR ...............................................FOR RENT 2014 SAKAI SV540D 84" SMOOTH DRUM, CANOPY, ONLY 470 HRS .................... $86,900 2 2014 SAKAI SV540TF 84" SMOOTH DRUM/PADFOOT SHELL KIT, CAB AIR .......FOR RENT

DUMP TRUCKS

3 2010 MUCK TRUCK HONDA GXV160 GAS, 8 CU FT 80 0LB CAP. ......................... $2,390 3 2019 CANYCOM SC75PD RUBBER, 1,655 LB PAYLOAD,35" W, 180° DUMP ...FOR RENT 3 2019 CANYCOM S25A RUBBER, CANOPY, 180° SWIVEL DUMP ......................FOR RENT 2 NEW YANMAR C30R-3R CANOPY, C/W SWIVEL DUMP, 5,513 LB PAYLOAD ............CALL 2018 YANMAR C50R RUBBER, CAB, SWIVEL DUMP, 8,30 0LBS MAX CAP. .........FOR RENT 1999 KOMATSU CD60R-1 STEEL TRACKS, 360° DUMPER, 7,160 HRS ................. $59,900 2005 CAT 730 23.5 TIRES, TAILGATE, ONLY 5,873 ORIGINAL HRS ...................... $199,900 2011 CAT 730 23.5R25 TIRES, TAILGATE, ONLY 3,200 HRS ...............................FOR RENT 2012 VOLVO A30F 23.5 TIRES, RV CAMERA, EMERG STEER, 4,141 HRS ...........FOR RENT 2012 VOLVO A30F 750/65R25 TIRES, RVC, HEATED, ONLY 5,360 HRS ......................CALL 4 2019 KOMATSU HM300-5 23.5R TIRES, HTD BOX, BRAND NEW ....................FOR RENT 2007 CAT 735 26.5R25 TIRES, HEATED BED, 13,110 HRS .................................... $69,900

LIFTS & LIFT TRUCKS

2013 DOOSAN G25E5 4,600 LB FORKLIFT, DUAL FUEL, SS, 3 STAGE MAST ..............CALL 2018 GENIE GTH-5519 TELESCOPIC FORKLIFT, CAB, ROTATING CARRIAGE .......FOR RENT 2007 CAT TL1055 10,000 LB, 55', A/C CAB, TILT CARRIAGE, 5,180 HRS .............. $78,900 2012 JLG G1055A 10,000 LB, 55' LIFT, CAB, HYD LEVELING, 4,448 HRS ............. $99,900 2008 JLG 12SP ELECTRIC PERSONAL LIFT, 12' BOOM, 21 HRS ............................. $3,990 NEW GENIE GS1930 19' ELECTRIC SCISSORLIFT ..............................................FOR RENT NEW GENIE GS1930 19' ELECTRIC SCISSORLIFT ..............................................FOR RENT 2008 GENIE GS-2032 20' LIFT, 32" WIDE, 511 HRS, ELECTRIC SCISSORLIFT ............CALL 2007 GENIE GS-2032 20" LIFT, 32" WIDE, 517 HRS, ELECTRIC SCISSORLIFT ...........CALL 2010 GENIE GS2632 26' ELECTRIC SCISSORLIFT, REMOTE, PWR TO PLATFORM, 229 HRS ............................................................................................................................. $14,900 2007 GENIE GS-2646 26' LIFT, 46" WIDE, 556 HRS, ELECTRIC SCISSORLIFT ............CALL 2008 GENIE GS-2646 26' LIFT, 46" WIDE, 561 HRS, ELECTRIC SCISSORLIFT ............CALL 2006 GENIE GS-3246 32' LIFT, 700 LB MAX 545 HRS, ELECTRIC SCISSORLIFT ........CALL 2008 GENIE GS-3268RT 4WD, DUAL FUEL KUBOTA, 2,368 HRS, LP TANK .................CALL 2015 GENIE GS3369 RT 4WD, KUBOTA DIESEL, ONLY 682 HRS ........................FOR RENT 2018 GENIE GS3369 RT 4X4, KUBOTA DIESEL, OUTRIGGERS, B/NEW ...............FOR RENT 2012 GENIE GS-4069RT 4WD, DUAL FUEL KUBOTA, 1,101 HRS,LP TANK INCLUDED CALL 2014 GENIE Z34/22 4X4, KUBOTA, 34' LIFT, 4' JIB ...........................................FOR RENT 4 GENIE Z45/25J 4X4, DIESEL, 5' JIB, FF TIRES, 3,364 HRS ................................ $39,900 2014 JLG 450AJ 4X4, DUAL FUEL, 1,702 HRS ..................................................FOR RENT 3 JLG 600AJ 4X4, DIESEL, PWR TO PLATFORM ,FFT, 3,200 HRS .......................FOR RENT 2014 GENIE Z60/34 4X4, ART BOOM LIFT, DEUTZ, ONLY 1,672 HRS .................FOR RENT 2012 JLG 660SJ 4X4, 60' BOOM, 72" JIB, ONLY 2,400 HRS .............................FOR RENT

WATER TRUCKS

2000 FORD F650 CUMMINS PWR, 2,000 GAL, 19,901 MILES, 6 SPEED, A/C, PTO, FF-SRR, HOSE REEL ..................................................................................................... $32,900 2006 FORD F750 5.9L CUMMINS, 7 SPEED, F/R/SIDE SPRAY, AIR BRAKES, HOSE REEL, CERT, 25,894 MILES ............................................................................................. $43,900 2008 FREIGHTLINER M2 220HP CUMMINS, 5 SPEED, 3" PUMP, FRS SPRAY, UNUSED 2,000 GALLON WATER TANK ................................................................................. $62,500 2010 INT. 4300 MAXXFORCE DT 7.6L, 255 HP, AUTO TRANS, 152" WB, PTO,BERKLEY PUMP, FRT, REAR & SIDE SPRAY, STREET, FLUSHER, SELF LOADING, HOSE REEL, 154,357 KMS ..........................................................................................................................CALL 2005 KENWORTH T300 4,000 GAL T/A WATER TRUCK, FRONT REAR & SIDE SPRAY, CAT C7 275HP, 14K FRONT, 40K REARS, HOSE REEL, 3" PUMP, CERTIFIED, 54,000 MI ......CALL

MISCELLANEOUS

2011 KOMATSU D65WX-17 6 WAY DOZER, CAB AIR, MS RIPPER, 13,705 HRS

2011 SULLIVAN D185P3JD 185CFM,125 PSIG, JD ENGINE, PINTLE HITCH, 2,003 HRS ..................................................................................................................................CALL 2 WACKER DPU 4045A US 710LB REV PLATE, HONDA GAS ......................................CALL 3 2015 WACKER DPU 6555HE US 1,000 LB REV PLATE, HATZ DIESEL .....................CALL 2006 JOHN DEERE 3320 33 HP, 4X4, HYDRO TRANS, TURF TIRES, REAR PTO, MID MOWER, 300CX LOADER, 3 PT HITCH, ONLY 764 HRS .......................................... $24,900

www.pacificrimequipment.com | sales@prequip.com

Page 8

Supply Post · supplypost.com

April 2020

Industry Trade Shows Postponed, Rescheduled, And Cancelled Amid COVID-19 Pandemic As of press time, these important industry trade shows have been adversely affected by the current global Coronavirus pandemic. Keep an eye on each show’s website or social media feeds to see new dates and information as they happen.

HEAVY EQUIPMENT

PARTS WE SHIP ACROSS NORTH AMERICA

ASK US ABOUT OUR CAB REBUILD PROGRAM!

As a result of the most recent announcements and information from both federal and provincial health authorities, the Interior Logging Association has made the difficult but necessary decision to cancel the 62 nd Annual Conference and Trade Show. This annual Conference was to be held in Kamloops, May 7 th – 9 th at the Tk’emlups Powwow Grounds and the Coast Hotel and Convention Center. The health and safety of our members, exhibitors, participants and everyone’s families will always remain our highest priority. As an Exhibitor or Delegate, we extend our thanks for your continuous support of our event. We will be providing refunds for registration fees and will contact you in the near future with more information on the refund process. We deeply appreciate your understanding around this difficult decision and look forward to seeing you next year in Kamloops. Please continue to monitor our website for more information regarding ILA activities and events, if you have any questions or concerns, please do not hesitate to contact Nancy or myself at our office at 250-503-2199. Sincerely yours, Todd Chamberlain, RFT, General Manager, Interior Logging Association. Watch interiorlogging. org for updates. b

TruckWorld Reschedules to June REBUILT. IN STOCK. READY TO SHIP.

TOLL FREE 1.855. 85.1115 SALES@BRIKERS.COM WWW.BRIKERS.COM

Truck World – the national trade show serving Canada’s trucking industry – is being rescheduled to June 4-6 in the wake of the World Health Organization declaring COVID-19 a global pandemic. The event will still be hosted at the International Centre in Mississauga, Ont., and the

corresponding TruckTech fleet maintenance summit is being rescheduled to Friday, June 5. “There is no higher priority than the health and safety of our community, exhibitors, attendees and team members,” said Joe Glionna, president of Newcom Media, which hosts the show. “This decision is being made after consulting with industry suppliers and manufacturers, and they have been overwhelmingly supportive in our decision to change the dates,” he said. “It’s the right thing to do.” Glionna also thanked longtime partners at the International Centre for helping to reschedule the dates, ensuring that exhibitors would still have the same number and pattern of days to load and unload exhibits. Truck World is a showcase for more than 500 industry suppliers, and draws more than 15,000 trucking industry professionals. Watch truckworld.ca for updates. b

Atlantic Heavy Equipment Show, Expo Grands Travaux To Be Postponed As one of many current measures being taken to protect public health, the Government of New Brunswick has recommended that any non-essential mass gathering of 150 or more people be cancelled or postponed to limit the spread of COVID-19.

For this reason, we have decided to postpone the Atlantic Heavy Equipment Show, which was scheduled to take place April 2-3, 2020, at the Moncton Coliseum Complex. This decision, made in partnership with Atlantic Land Improvement Contractors Association and Moncton Coliseum Complex, was not taken lightly, but the health and safety of our exhibitors, partners, visitors and contractors is our top priority. We have also decided to postpone Expo Grands Travaux which was scheduled to take place May 1 – 2, 2020, at Espace Saint Hyacinthe. This decision, made in partnership with Espace Saint Hyacinthe, was not taken lightly, but the health and safety of our exhibitors, partners, visitors and contractors is our top priority. We will continue to monitor information from the Public Health Agency of Canada, the province, and regional health authorities. Once the all-clear has been received to resume holding events again, we look forward to sharing rescheduled dates for the show. We are disappointed we couldn’t proceed with what was shaping up to be an excellent show, but we look forward to inviting the community back for the event at a later date. Watch for updates at ahes.ca and expogrands travaux.ca.b

ConExpo-Con/Agg 2020 had almost 130,000 attendees, however, was forced to close the show a day early due to pandemic concerns. See page 52 for full story.

CONEXPO-CON/AGG

ILA 2020 Conference & Trade Show Program Cancelled

April 2020

Supply Post · Our Readers Are Your Buyers

Page 9

INLAND EQUIPMENT SALES www.inlandequipment.com | sales@inlandequipment.com | 150 Industrial Place, Penticton, B.C. Call Vic Kampe For Details | Ph: (250) 493-6791 | Fax: (250) 492-2762

FEATURED UNITS FOR SALE, RENT or RENT TO OWN

2014 Volvo VHD Triaxle Water Truck 36,711 km, Neway susp. Wabash tank, plumbed for pup ...$149,000.

2014 Cat 660S Watertruck, 21,600 Miles, Front, Rear and Side Spray, Hose Reel .........................$149,000.

40 NEW EXCAVATORS TO CHOOSE FROM

EXCAVATORS/FORKLIFTS 2013 John Deere 130G, 2 Buckets, 5,985 hrs ........................................................... $100,000. 2014 Bobcat E85M Excavator, Thumb, A/C, Dozer, 1,319 Hrs ..................................................... Call. 2012 Bobcat E80 Excavator, Thumb, A/C, 1,377 Hrs. ............................................................. Call. 2015 Bobcat E63 Excavator, Thumb, A/C Dozer, 972 Hours .................................................... Call. 2014 Bobcat E55 Excavator, Thumb, A/C, Dozer, 1,363 Hours ................................................. Call. (2) 2015 Bobcat E35 Excavators, Thumb, A/C, Dozer, 545-295 Hours ................................. Call. (2) 2015 Bobcat E26 Excavators, Thumb, A/C, Dozer, 295-427 Hours ................................. Call. 2010 Bobcat E32M Excavator, 2,600 hrs, 7,000 lb ............................................................. $36,000. (2) Takeuchi TB16 Excavators ....................... Call. 2013 Terex TC16 Excavator, 3,800 lbs, cab, 670 hrs ............................................................... Call.

........................................................... $124,000. 2015 Bobcat S630, 2sp, Hyd Q/C, A/C. 2112 hrs. ............................................................. $38,500.

2004 Eljay RC5411 Cone............................$200,000.

TRUCKS 2013 International 4300 Water Truck A/T, New Tank, Front, Rear, Side Spray .............. $71,000. 2013 IHC 4400 S/A Water Truck, New tank, Front, Rear, Side Spray .................................. $71,000. 2012 IHC 4300 S/A Water Truck, New Tank, Front,

FOR RENT OR SALE Sizes Available: ZX245, ZX345, ZX135, ZX300, ZX35, & ZX210 BELLY DUMPS, LOW BEDS & TILT TRAILERS

(2) 2005 Cat 246B Skid Steer, closed cab ....Call.

1990 Peerless 50 Ton Tridem D/D Lowbed, 6’6” Neck

2004 Cat 287 Skid Steer, rubber tracks, 1,300 hrs ....................................................................Call. 2012 Cat 972H, 5,000 hours, E.Steer, autolube, .... .............................................................$175,000

GRADERS & DOZERS 2004 Cat 140H 17.5x5 Tires New, 7,800 hrs ............................................................ $110,000. 2007 Cat 160H Ripper, snow wing, 8,900 hrs ............................................................ $119,900. 2007 John Deere 872D, AWD, 7,147 Hrs, tires 4 @ 100%, 2 @ 80% .............................$110,000. 2004 John Deere 772CH, Ser. II, AWD, ripper........ .......................................................... $105,000. 2008 John Deere 872D, AWD, 14’ MB, A/C, ripper ............................................................ $125,000. 2007 Cat 14H VHP, ripper, push block, 20.5 x 25 tires @ 60% (wing available) ......................Call.

Rear, Side Spray .................................. $69,000. 2009 IHC 4300 S/A Water Truck, A/T, New Tank, Front, Rear Side Spray......................... $69,000. 1984 P+H Omega 20 Ton Crane, 62’ Boom, 20.5x25 Tires ....................................... $24,900.

2012 Bobcat T750, Cab, 2,000 Hrs ......... $46,000.

CRAWLERS/WHEEL LOADERS/SKID STEERS 1981 Cat 966D Bucket Machine, 40% Tires ... Call. 1985 Cat 966D Bucket or Grapple .................. Call. 1988 Cat 966E Bucket Machine, 3rd Valve ..... Call. 1978 Cat 966C, Forklift sideshift, fork adjust . Call. 2014 Cat 950K Loader ................................... Call. 2013 Cat 924 K Loader 1,910 hrs, auto lube, brofil clean air system, ride control, emergency shut off

CRUSHERS FOR SALE 5 Surge Bins, 1 Jaw, 6 Cones and Screen Decks

Ext. 10 x 21 Deck, Beaver Tails, Detach ....... $44,900.

CRUSHING EQUIPMENT 1997 Armadillo Jaw (tri axle), 23-26" ....$100,000. 1999 MVP 350 Cone (rebuilt) ..............$275,000. 2007 MVP 450 Cone .............................$350,000. 2001 2045 Screen & Cone Deck, no feeder, 2-100hp motors .................................$225,000. 2007 MVP 450 Cone (tri axle), 2-200hp motors ..........................................................$350,000. 1995 Surge Bin (In and Out) (fuel tank) ....$25,000.

ROLLERS/PACKERS/CRUSHING & PAVING (2) 2007 IR SD45D-TF, 54", w/shell kits . $62,000. 2007 Powerscreen 1800 Warrior, 2,587 hrs . $150,000. 2007 Fintec 542, 5'x12' 2 deck screener ... $130,000. 2013 Dynapac CA2500D, 640 Hrs .......... $85,000.

1984 AM General 6x6 4000 gal Heated Tank Off Hwy truck, Low Miles .......................... $25,000. 2014 Volvo Tri-Axle 4800 Gal Water Truck, low miles, 435 HP, 2 available ................... $155,000 2015 Western Star 4000 Gal Potable Water Truck, 500 HP, 18 Sp, 36,000 Km.............. Call. 2011 Ford F750 S/A Dump Truck, 200 HP, 6 Sp, 10’ Box ....................................................... Call. 1980 Grove RT740 40 Ton Crane, 4 section boom, 32’ jib, 4x4x4 ....................................... $39,000. 2014 Cat 660S Water Truck, 21,600 Miles, A/T, 20,000 F, 46,000 R ............................ $149,000. (2) 2014-13 Volvo A40G & F Rock Trucks, Tailgates 5,000 to 6,900 Hrs ..................... Call. 2004 Ford F750, 2,000 Gallon Water Truck, Front & Rear Spray, Hose Reel.................................. $47,500. 2005 Ford F750 Water Truck, 2,000 Gal., Front Rear Spray, Hyd. Brakes, 28,400 miles................ $49,000.

FEATURED RENTAL UNITS ★ RENT TO OWN ★ NEW

NEW

Hitachi ZX245LCs

2012 Cat 972H, 5,000 hours, E.Steer, autolube, .............................................................$175,000

Articulated Rock Trucks

Hitachi ZX210LCs

RENTALS AVAILABLE New Hitachi ZX300LC · New Hitachi ZX135LCs · New ZX60, ZX50, ZX35 and ZX26 ·Volvo and Cat Rock Trucks · 2014 Cat 950K Wheel Loader

CALL FOR OTHER ADDITIONAL RENTAL UNITS

Page 10

Supply Post · supplypost.com

John Deere’s New Motor Grader Premium Circle Option John Deere unveiled a new factory-installed Premium Circle option for all G-Series, GP-Series and SmartGrade™ motor graders. This industryleading option features a fully sealed bearing and pinion design, reducing maintenance costs and downtime, while also significantly boosting circle

torque and speed. “To be profitable, customers constantly work to balance ever-tightening margins with increasing expenses,” said Luke Kurth, motor grader product marketing manager, John Deere Construction & Forestry. “John Deere is focused on providing new ways to help reduce those

costs, and we are able to do that with the new Premium Circle option for all G- and GP-series motor graders worldwide. By eliminating the circle wear inserts and need for adjustment or replacement, customers will benefit from reduced parts and labor costs, while still maintaining an accurate grade.” With traditional circle designs, customers spend valuable hours in the shop replacing or shimming the wear inserts, as opposed to being on the job. Over

the lifetime of the machine, this downtime adds up, but is necessary to maintain tightness for accuracy and prevent damage to the circle. The Premium Circle option replaces wear inserts with a sealed bearing that only requires a few minutes to grease every 500 hours. Additionally, the gearbox oil change intervals have been extended from 2,000 to 4,000 hours, while the pinion and circle teeth are completely sealed from dirt and debris to minimize wear.

April 2020 The new Premium Circle with integrated slip clutch has significant effects on machine productivity as well. With the Premium Circle, John Deere motor graders boast 40% more circle torque and 15% more speed over the Standard Circle. Contractors will also see improved performance and accuracy when using a grade control system by no longer having to compensate for wear in the circle. This is especially impactful when coupled

with the innovative John Deere SmartGrade system. The same grader can now be used from initial site clearing to final grade without stopping to install masts or downing the machine to adjust for looseness in the circle. Those who attended the 2020 CONEXPO-CON/ AGG Show in Las Vegas got a close-up look as John Deere premiered the Premium Circle for the first time. b Source: John Deere

5425 Production Blvd., Surrey, BC, V3S 8P6

Phone 604.530.5758 Fax 604.530.3554

Toll Free 1.888.530.5444 Focused on Parts for John Deere & Hitachi Late Model Excavators

NOW WRECKING: ZX270LC-3

mountainforestryequipment.com $193,000

2006 MADILL 2850C LL, New zero hour final drive & slack adjust., new rollers, new wear plates, new rock guards, comes with new idlers (not installed).

JOHN DEERE 450D LC

Components · Cylinders · Cabs · Engines Undercarriage · Booms · Sticks · Linkage www.langleyexcavator.com parts@langleyexcavator.com

$323,000

$123,500

2015 CAT 325D LOG LOADER, WBM, c/w 12’ WBM Power Grapple, Big UC, 6,800 hrs.

$177,500

$261,000

2015 HITACHI 210, QS500 Processing Head, 9,337hrs., c/w all Fire tools, radio, spare hoses & Parts. Ready to work.

2016 JOHN DEERE 2454D LL, Clean & tight, owner operator machine, No majors, Excellent condition, 7,150 Hrs.

2014 INTERNATIONAL 7500, c/w 6,000lb Stellar Crane, Magnum Reels, Cust. Dog House, New EGR Valve, Locking Rear Diff., 9L Int. Eng., New Tire Chains 3x Singles, 148,000 Kms.

$277,000

2014 CATERPILLAR 568,Two buckets & thumb, used in gravel pit, good undercarriage, 5,300 hrs.

833-988-0375

KCox@mountainforestryequip.com

April 2020

Supply Post · Our Readers Are Your Buyers

Second Harvest Launches Food Supply Task Force Second Harvest, Canada’s largest food rescue organization, launched the Food Rescue Canadian Alliance (FRCA) Task Force, a national network that will support food redistribution efforts across the supply chain during the COVID-19 pandemic. The Task Force will work to make food available to organizations and reach populations that are in acute need. Led by Second Harvest, the Task Force consists of national leaders and includes collaboration between the food industry, non-profits, and government. Members include businesses like Loblaw Co. Ltd. and Sysco, and charities like Breakfast Club of Canada, Salvation Army and food banks. “In times like these, vulnerable community members need our support the most,” said Lori Nikkel, CEO of Second Harvest. “With over 60,000 non-profit organizations in Cana-

to support food recovery and distribution during the COVID-19 pandemic. FoodRescue.ca can enable food donors and non-profits to coordinate donations with minimal interaction, supporting social/ physical distancing. “We want to make sure that food relief organizations across the country that stay open can provide critical, life-saving support to our most marginalized communities,” said Nikkel. “We need to ensure that the entire food supply chain can be plugged into a solution to benefit those in need. That solution is FoodRescue.ca.” Nikkel added that collaborating can also identify available transportation and storage capacity and supplement it with necessary support with national food redistribution efforts. “We are surveying both the non-profit and corporate sectors across the country to determine the logistics capacity available so we can coordinate where food donations can be transported and stored for efficient distribution.” b

da supporting people, we must work together – there is no organization that can do this alone.” Second Harvest recently completed a national mapping project in partnership with Value Chain Management International which identified over 60,000 Canadian organizations that provide food to vulnerable populations. The Task Force will work together to support tens of thousands of community food programs across the country who are struggling to access food for their program participants. FoodRescue.ca is the tool that can manage this centralization of need and support. This free, easy-to-use donation platform connects businesses that have food to donate non-profit organizations. FoodRescue.ca is an accessible tool that can be mobilized immediately Source: Second Harvest

VISIT OUR WEBSITE FOR OUR FULL INVENTORY:

FORESTECH EQUIPMENT

WWW.FORESTECH.CA Contact Tim Lloyd : 250-703-3551

4335 BARGE TERMINAL RD. CAMPBELL RIVER, BC

$27,500 1998 Caterpillar D300E Articulated Dump Truck,

c/w: 23.5X25 tires. 18,032 hours.

WHEEL LOADER

CALL 2017 Link-Belt 370X2TLW, c/w: T-Mar grapple, heel rack, LL front, west coast elevated rear entry cab on riser, Isuzu eng., forestry guarding pkg., high walker U/C w/ 28” DBP. 5,3XX hours.

LOG LOADERS

2007 John Deere 844J Wheel Loader c/w: WBM M33 2014 Kobelco SK350MkIVLL, c/w: T-Mar grapple, heel rack, LL front, west coast elevated rear entry cab log grapple, third valve, ROPS cab, ride control, 29.5 on 72” riser, Cummins eng., forestry guarding pkg X 25 tires, forestry guarding package. 15,145 hrs. w/ aux. fuel tank, high walker undercarriage w/ 30” Recent trans. r/b, brake work, r/b hyd. pump, good double bar pads. 3,180 hours on rebuild by T-Mar rubber! ......................................................... $199,500. Ind. in 2014. .................................................. $72,500. 1990 Caterpillar 980C, c/w: WBM M33 log grapple,

2008 John Deere 3554LL, c/w: T-Mar grapple, heel rack, log loader front, west coast elevated rear entry

third valve, ROPS cab, 29.5X25 tires, forestry cab on 72” riser, forestry guarding pkg w/ aux. fuel guarding pkg w/ aux. counterweight. ....................CALL tank, high walker undercarriage w/ 28” DBP. Ready to FELLER BUNCHERS

Page 11

work! ...............................................................$89,500 2004 John Deere 3554LL, c/w: T-Mar grapple, heel

2005 Valmet 475EXL, c/w: Quadco OFH22B 22” rack, LL front, west coast elevated rear entry cab on

felling head, 360 degree wrist, ROPS cab, Cummins 72” riser, forestry guarding package w/ aux. fuel tank, eng., fire suppression, Pro Heat, self levelling high walker undercarriage w/ 28” DBP ......... $89,500. undercarriage w/ 28” SBP. 10,645 hours. Recent new 2002 Madill 3800C c/w: T-Mar grapple, heel rack, LL front, west coast elevated rear entry cab on riser, pumps, work orders. .................................... $124,500. Series 60 engine, forestry guarding package, high 2005 Madill T2250B c/w: Madill 24” felling head, walker u/c with 28” double bar pads .............$174,500

SOLD

340 degree wrist, ROPS cab, Detroit Diesel Series 50 2000 Hitachi EX370LC-5LL c/w: Pierce grapple,heel rack, log loader front, west coast elevated rear entry eng., self levelling undercarriage w/ 28” SBP.13,531 cab on 72” riser, forestry guarding pkg w/ aux. fuel hours. 500 hours on new eng., recent new pumps tank & aux. counterweight, high walker u/c w/ 30” ........................................................................$144,500 DBP. Recent new tracks, boom foot R/B....... $89,500.

CALL

$369,500 2004 Madill 3800C Processor, c/w: 2016 Southstar QS605 grapple proc. (6,466 hrs), log loader front, west coast elev. rear entry cab, Series 60 eng., forestry guarding pkg, HW U/C w/ 28” SBP. Can be viewed working.

2017 Link-Belt 350X2TLW c/w: T-Mar grapple, heel rack, LL front, west coast elevated rear entry cab on riser, Isuzu eng., forestry guarding pkg, high walker U/C w/ 28” DBP, 4,3XX hours.

FORESTRY EXCAVATORS 2013 John Deere 2954D “Road Builder” c/w: 42” dig bkt, 64” CU bkt, 52” T-Mar grapple & heel rack, Q/C, hyd. thumb, aux. hyd (plumbed for grapple & heel rack), hoe front, forestry cab on 7” riser, forestry guarding pkg w/ aux. fuel tank, high walker undercarriage with 28” DBP. 7,7XX hrs. Recent new U/C and linkage R/B................................... $224,500. 2006 Komatsu PC300LL-7 “Road Builder” c/w: 44”Accurate dig bkt, PMW heel rack (no grapple), Accurate Q/C, Accurate hyd. humb, hoe front, cab on 15” riser, forestry guarding pkg w/ aux. fuel tank, high walker undercarriage w/ 28” DBP ..........$34,500 1992 Caterpillar FB300B “Backspar” c/w: Dig bkt, Q/C, hyd. thumb, hoe front, single shive backspar attachment, forestry cab, forestry guarding package, highwalker U/C w/ 24” SBP. Work orders. .....$39,500

$59,500 2007 Caterpillar D6N LGP Crawler Tractor c/w: 6 way blade, sweeps, ROPS cab with guarding, System One U/C w/ 34” single bar pads, Caterpillar D6N hydraulic ripper. 17,739 hrs.

YARDERS

MARINE EQUIPMENT

1988 Madill 122 Swing Yarder c/w: Grapple, lines, West Coast 15’ Sidewinder Boom Boat c/w: 4-71 engine, Olympic standard drive, VHF, half 57’ boom w/ fairlead, split cab, 8V92 eng., Wheeler cab with lights, cab heater, bilge pump, Critical air system update, two guy lines, mounted on Madill grade exhaust ...........................................$34,500 087 hydraulic drive carrier w/ 32” TBP. Work orders, West Coast 15’ Sidewinder Boom Boat c/w: good operating condition. ...........................$399,500. 4-53 diesel engine, Allison PTO, Olympic hydro 1986 Madill 143 Swing Yarder c/w: Grapple, spare drive...............................................................CALL grapple, lines, rigging, 70’ boom w/ fairleads, cab on 1979 Argo 24’ Aluminum Crew Boat c/w: Bow 36” riser, Cummins K model eng., 45’ gantry, two lights, GPS/Chartplotter/sounder, Si-Tex radar, guy lines, mounted on Madill B8H hyd. drive carrier 2 X VHF radios, 10 pass capacity, trim tabs, 2 X bilge pumps, Mercruiser V8 I/O power. ........CALL with 32” DBP. ...................................................... CALL 1983 Madill 044 Swing Yarder, c/w: Grapple, lines, rigging, 60’ boom, cab on 36” riser, Quincy comp.,

OFF HWY TRUCKS & LOWBED TRAILERS

Cat eng., mounted on Madill B-8 crawler carrier/

Pacific P-16 T/A Conventional Truck & Knight 100 Ton T/A Lowbed Trailer, c/w: 12V71N, Allison 5960 trans., spring susp., Clark BD91 axles, 14:00X25 tires, 13’ bunk on turntable, log bunk hitch, 21’3” L X 14’ W wood lined deck, KB axles, 14:00X25 tires, manual beaver tails, push block. ................ $104,500.

24” TBP. Cat 330 backspar & Cat D7G dozer also

Kenworth 849 T/A Truck & King TD100RG T/A Lowbed Trailer, c/w: Cummins NTC 400 eng., 13 X 4 trans, spring susp., Clark BD90 axles, 14:00X25 tires, 11’W X 20”L wood lined deck, Timken axles, 14:00X25 tires. ...............................................$49,500

Drill, c/w: PR66 hammer, 22’ steel slide, 3800

available. .............................................................. CALL ROCK DRILLS Finning / Morgan Power Apparatus M-32F Tank square boom, ROPS cab, 800 CFM comp., Cat 3306DI eng., aluminum mag., mounted on M-32 or M-40 crawlercarrier. 1 of 2 units avail... $42,500/Each

$36,500

1983 Cat 14G Motor Grader c/w 14’ MB, accumulators, cab, 16:00R24 tires

Page 12

Supply Post Âˇ supplypost.com

April 2020

brandtused.ca What are you looking for? Searching for used equipment just got a whole lot easier with advanced searches, currency conversion and monthly payment calculations. And every machine is backed by Brandt â&#x20AC;&#x201C; the best-trained and committed after sales support team in the business.

brandtused.ca | 1-888-2-BRANDT

April 2020

Supply Post · Our Readers Are Your Buyers

2008 JOHN DEERE 200D LC Unit #: 0U511083 Hours: 9800 Location: SURREY, BC

$75,000

2011 JOHN DEERE 450J Unit #: 0U194540 Hours: 5662 Location: SASKATOON, SK

$105,000

JOHN DEERE 672G

Unit #: 0U673855 Hours: 3002 Location: QUEBEC CITY, QC

$288,850

2016 JOHN DEERE 848L Unit #: 0U675860 Hours: 6033 Location: KAMLOOPS, BC

$169,950

2006 JOHN DEERE CT322 Unit #: 0U124726 Hours: 3319 Location: VERNON, BC

$22,900

2014 JOHN DEERE 772G

Unit #: 1U660743 Hours: 9357 Location: PRINCE GEORGE, BC

$165,000

JOHN DEERE 310SK

Unit #: 0U254568 Hours: 4663 Location: MISSISSAUGA, ON

$65,000

2014 JOHN DEERE 2154D Unit #: 0U210824 Hours: 11493 Location: CASTLEGAR, BC

$165,476

FLEXIBLE OPTIONS FINANCING CUSTOMIZED, FIND OUT MORE 1-855-711-4545

2017 JOHN DEERE 35G Unit #: 0U278160 Hours: 1305 Location: NANAIMO, BC

$49,900

2015 JOHN DEERE 324K Unit #: 0U037811 Hours: 5273 Location: SURREY, BC

$77,900

2005 VOLVO L110E Unit #: 0U060535 Hours: 9234 Location: LAVAL, QC

$77,000

2014 JOHN DEERE 903K

Unit #: 0U254210 Hours: 12175 Location: LAC-DES-ÉCORCES, QC

$199,001

Page 13

2008 JOHN DEERE 310SJ Unit #: 0U164539 Hours: 5234 Location: RED DEER, AB

$49,000

2013 JOHN DEERE 300D-II Unit #: RM651574 Hours: 5003 Location: REGINA, SK

$279,000

2011 JOHN DEERE 700J Unit #: 0U209923 Hours: 7314 Location: CAMBRIDGE, ON

$89,000

2006 ECO LOG 574B

Unit #: 1U000182 Hours: 24874 Location: MONCTON, NB

$85,000

Supply Post · supplypost.com

A Stable Forwarder Means More Efficiency For Swedish Family A stable forwarder does not only mean a better work environment with less strain on the operator, it’s also of great importance to achieve good productivity. To forest machine contractor Patrik Jonsson, at J Jonssons Skogs AB, the greatest benefits lie in more efficient crane operations and a higher transport speed.

“I have had this Komatsu 895 since May 2019, and it is the most stable forest machine I have operated,” said Jonsson. J Jonssons Skogs AB is a forest machine contractor in Älvsbyn in the north of Sweden, which consists of the brothers Patrik and Johan Jonsson, as well as three employees. Their father, Jonny Jonsson,

An Operator’s

founded the company and is still involved as CEO, even though he is retired from being an operator. To Komatsu Forest, the company is a relatively new customer, when, after countless years with another brand, they chose to switch to our machines: “Yeah, that’s right — we had not tried Komatsu before,” said Jonsson.

“The process of switching brands was a pretty long one. There are many factors that come into play — machine, services, maintenance, and our general feeling about the company. In the end it was how all of these came together that made the decision. We started with a 951 in 2017 and Komatsu has lived up to our high expectations,” he explained. Distinctive forwarder stability Since everything has worked so well with the harvester, the company decided to switch to a Komatsu on the forwarder side as well, and they chose

Best Friend!

Who’s a good seat?! You are!

April 2020 Patrik Jonsson with his Komatsu 895 Forwarder.

KOMATSU FORESTRY

Page 14

a Komatsu 895 which they’ve had since May 2019. Patrik, who has now operated the forwarder for eight months, explained that a significant difference compared to their previous forwarders is how stable it is. “All forwarder operators at the company agree that it is extremely stable,” said Jonsson. “There are no surprises — it’s very reliable. We also have LoadFlex, which maintains a low center of gravity, even with a load,” he continued. When do you think it is most important? “In general, I would say,” Jonsson explained. “With good stability you become more efficient; that’s a fact. I can operate the crane more efficiently when I don’t have to focus on obstacles in the terrain — I can work at the pace I want. Even at uncomfortable angles, I notice the stability — for example when going downhill. The rear frame follows in the same direction as the front frame when turning and maintains ground contact,” he said. Which benefits do you think the stability has for you as an operator?

OPTIMIZE MACHINE PERFORMANCE WITH ESCO AND LSW WEAR PARTS

“Being able to work more efficiently, as I said. But you can also feel it at the end of the day,” said Jonsson. “If you trust the machine and can work in a relaxed way, you feel less stressed and less tired and this also means that you make better decisions,” he concluded. J Jonssons Skogs AB, operates in Älvsbyn, in the north of Sweden. He has a Komatsu 951 since 2017 and a Komatsu 895 since May 2019. He began running logging operations for SCA ever since his Grandfather started in the 1940s. Grandfather Sixten Jonsson started in the forest as a 12-year-old in the 1930s, because he liked horses. In the beginning, he used a horse and sled, and then moved on to his first machine, an Oliver Cletrac. Daddy Jonny continued down the same road and started his own company in 1970, which today is J Jonsson Skog AB. Today, he does not operate machines, but is still CEO. The brothers Patrik and Johan Jonsson are also working in the company, together with three employees. b Source: Komatsu Forestry

ESCO® Attachments

ESCO® Manganese Crusher Wear Parts

Ultralok® Tooth System

lswwearparts.com

Fredericton, NB 506-458-5613

Truro, NS 902-895-4913

April 2020

Supply Post · Our Readers Are Your Buyers

Page 15

682 Okanagan Ave. E., Penticton, BC, Canada

1-866-344-6480

cturchak@brutusbodies.com

YOUR TRUCK BODY BUILDING SPECIALISTS MARANDA M90 SLIDE-IN BODY FOR MID-SIZE 6’ PICKUP (UNIT 4370)

MARANDA M170 SLIDE-IN BODY FOR FULL-SIZE 8’ PICKUP (UNIT 4372)

MARANDA X240 SLIDE-IN BODY FOR FULL-SIZE 8’ PICKUP (UNIT 4369)

MARANDA V375 SLIDE-IN BODY FOR FULL-SIZE 8’ PICKUP (UNIT 4366)

BRUTUS ETV2 EMERGENCY TRANSPORTATION BODY FOR SHORT OR LONG BOX PICKUPS (UNIT 4238)

2015 RAM 3500 W/10’ FLAT DECK (UNIT 22682)

2019 FORD F-350 CREW CAB W/9’ TIRE BODY, VMAC VR70, TOMMYGATE (UNIT 24186)

2019 FORD F-550 CREW CAB W/11’ SERVICE DECK, MILLER 302 AIR PAK, COBRA 5500 (UNIT 24977)

2019 FORD F-350 CREW CAB W/ MARANDA V375 SLIDE-IN BODY (UNIT 4368)

2019 RAM 5500 XLT W/10’ SERVICE DECK, VMAC VR70, FASSI F85B.0.24, TOMMYGATE (UNIT 2516)

2019 FORD F-450 CREW CAB W/MARANDA V375 SLIDE-IN BODY (UNIT 4367)

2019 FORD F-550 CREW CAB W/RAFNA HI-RAIL, 9’ SERVICE BODY, VMAC VR70, COBRA 3300 (UNIT 24897)

2019 FORD F-550 W/11’ SERVICE DECK, MILLER 600 AIR PAK, AUTOCRANE EHC-6 (UNIT 4061)

2019 FREIGHTLINER M2 4X4 EXT. CAB W/12’ SERVICE BODY, VANAIR RS85, COBRA 11000 (UNIT 3682)

2019 INT’ WORKSTAR 4X4 EXT. CAB W/12’ SERVICE BODY, VMAC RAPTAIR MF, COBRA 11000 (UNIT 4126)

2019 FREIGHTLINER M2 4X4 EXT. CAB W/12’ SERVICE BODY, VANAIR RS85, COBRA 11000 (UNIT 3901)

www.brutusbodies.com

Page 16

Supply Post · supplypost.com

Conservation Project Protects Salmon In The Great Bear Rainforest The Nature Conservancy of Canada (NCC) has acquired a 70-hectare (174acre) property on the Bella Coola estuary. Located on the edge of the community of Bella Coola and directly adjacent to other conservation lands, this parcel was the last unprotected private property at the mouth of the Bella Coola River. Despite its proximity to the town centre, the estuary remains naturally productive, providing essential habitat for salmon, grizzly bear, migratory birds and other wildlife. The new Tidal Flats Conservation Area protects inter-tidal marshes, mudflats and tidal channels, which provide valuable habitat for waterfowl, shorebirds and juvenile salmon. Upland areas of the property are forested with western red-cedar and Sitka spruce. The estuary supports a number of confirmed spe-

cies at risk, including Species At Risk Act-listed grizzly bear (special concern), marbled murrelet (threatened) and Dolly Varden (special concern). Conserving Tidal Flats ensures that the estuary will continue to function in a natural state for the benefit of these species and many others. Tidal Flats is well-used by the local community for recreation, wild food foraging and scientific research. The Nuxalk Nation has voiced their support for this project, as have many other residents of the Bella Coola Valley. This land conservation project was made possible by funding from the Government of Canada’s Nature Fund, including the Natural Heritage Conservation Program and implementation funds for the North American Waterfowl Management Plan. The Nature Conservancy of Canada also gratefully acknowl-

edges the financial support of the Fish and Wildlife Compensation Program, the U.S. Fish and Wildlife Service, through the North American Wetlands Conservation Act, and many generous donors. Quotes “These estuary lands are so productive, so full of life, and therefore so important to the people and wildlife who make their homes in the Bella Coola Valley. We are excited to undertake this project, which is the Nature Conservancy of Canada’s first in the valley. We are grateful for the support of the community and look forward to building long-lasting relationships as we work together to care for the unique nature that makes the Great Bear Rainforest not just world famous, but globally irreplaceable,” said Nancy Newhouse, BC regional vice-president, Nature Conservancy of Canada.

ATTACHMENTS & MORE

April 2020

“Nuxalk community members frequently use the Tidal Flats lands for cultural, medicinal and recreational purposes and have long wanted to see these lands protected in order to support our community’s ongoing use of them. Given the high ecological and cultural values on the estuary, the Nuxalk Nation supports the Nature Conservancy of Canada’s interest in conserving Tidal Flats. With their success, we look forward to working with the Nature Conservancy of Canada to care for this significant area for generations to come,” said Chief Wally Webber, Nuxalk Nation. “We know that our wild salmon populations and other species at risk are facing urgent threats — from warming waters caused by climate change to the loss of important habitat that they migrate through. By taking the initiative now, we’re establishing a sustainable ecosystem so that our wildlife can thrive,” said The Honourable Jonathan Wilkinson, Minister of Environment and Climate Change “The Bella Coola estuary has been of such environmental, cultural and historical significance to the Bella Coola Valley and the Central Coast of British Columbia. This is a tremendous opportunity to ensure it continues to benefit our whole community and region in the future,” said Tom Hermance, president of Bella Coola Valley Tourism and long-time Bella Coola resident.

Facts The Bella Coola River supports the region’s largest coho salmon run, which relies on the continued health and productivity of the estuary. The intermingling of fresh and ocean water in the estuary creates an environment that is both unique and essential to the life cycle of salmon, among other creatures. Salmon are central to life in the Great Bear Rainforest. These iconic fish nourish everything from marine mammals, such as orcas and sea lions, to birds like herons and kingfishers, to land dwellers, including bears, wolves and humans. Salmon also feed the forest, where insects, algae, mosses, shrubs and trees all take up the nutrients from decomposing salmon. Trumpeter swan, Barrow’s goldeneye and American widgeon are just some of the migratory bird species that visit Tidal Flats every year.

Coastal wetlands are important carbon sinks and will increase resilience to rising sea levels. Acknowledgements The Nature Conservancy of Canada acknowledges the generous funding support from many governments, foundations and individuals, including: • The Gov’t of Canada • Fish and Wildlife Compensation Program • The United States Fish and Wildlife Service • Sitka Foundation • The Vista Fund, held at Nicola Wealth Private Foundation • British Columbia Conservation Foundation • Jack & Sylvia Gin Foundation • Geoff & Karen Cowper • Eric Grace • Takla Foundation • Open Purse Fund, held at Nicola Wealth Private Foundation. b Source: Nature Conservancy of Canada

EQUIPMENT FINANCING | FASY & EASY • Competitive Rate • All Types of Equipment • Lease or Finance • Private Sales • Pre-Approvals • Auctions

Call Ron Corbeil 1-877-767-7600 | rcorbeil@fclfinancial.com

WWW.FCLFINANCIAL.COM

• SPECIALIZING IN NEW & USED UNDERCARRIAGE • PARTS • EQUIPMENT RENTALS & REPAIRS EQUIPMENT LTD. • TRACK PRESS FACILITY • IDLER REBUILDING

594 Chilcotin Road, Kamloops, BC V2H 1G5

EQUIPMENT FOR RENT OR SALE

• • • • • • •

• • • •

FOR SALE 2018 Komatsu PC200LC-8, 3 bkts, Q/C, thumb, cabguard, catwalk, new mach. 2017 Komatsu PC350LC-8, 3 bkts, thumb, 2,200 hrs, new cond. 2015 Komatsu PC170LC-10, 3 bkts, thumb, cabguard, like new cond., 1,400 hrs. 2014 Komatsu PC290LC-10, 2 bkts, thumb, exc. cond, 4,800 hrs. 2014 Komatsu PC88MR-8, 3 bkts, wrist-bkt., hyd. thumb, swing boom, 2,400 hrs. 2016 Hitachi ZX85 USB-5, 3 bkts, hyd. thumb, swing boom and blade, exc. cond 2012 Komatsu D65EX-17, sigma blade, ripper & forestry guard., new U/C, plumbed for GPS, exc. cond. Dressta TD10M Crawler, 6 way, blade, cab, A/C, 1,225 hrs, like new cond. 2014 Hamm H13iX, 84” smoothdrum packer w/cab, A/C, low hrs, exc. cond. 2012 Komatsu PC200LC-8, 2 bkts, thumb, 2012 Hamm 3412, 84” smoothdrum packer w/shell kit, cab, A/C, exc. cond. cabguard, Q/C, exc. cond., 3,300 hrs. 2014 & 2010 Hamm 3307, 66” smoothdrum packer w/shell kit, cab, A/C, exc. cond.

FOR RENT

Own or Rent

• Hammers • Crushers Crusher Buckets • Grapples • Compactors • Blowers & Dust Suppression

1-877-255-9293 · 604-888-9020 · www.vanedequipment.com

2014 Komatsu WA270-7, wheel loader, 3 yd. bkt. forks/pipe grapple, exc. cond.

HUGE INVENTORY OF USED UNDERCARRIAGE • • • • • • • • •

Cat 330 TGA’s 28”, 2 bar pads on new rails. Komatsu D65EX15-17 TGA’s 24” (Plus System) ZX350/PC360 New Take-off Track Groups, 32” 3 bar Deere 2154 TGA’s 28” 2 bar on new rails New Berco 7.5 pitch TGA’s w/24” 2 bar pad fits 200 size excavator ZX200LC/PC200LC TGA, 28” 2 Bar on new rails ZX350, ZX450 bottom rollers. T.Cat 870 / Deere, 959 track spring assy. rebuilt. ZX200 (Rebuilt) Track Adj. Assembly.

Phone: (250) 374-5054

1992 - 2020

Email: traktech@telus.net

EVES: Regan Zurowski (250) 371-1444 • Chad Zurowski (250)371-7535

For photos and more listings visit www.traktech.ca

April 2020

Supply Post · Our Readers Are Your Buyers

Horizontal Shaft Impactor Joins Superior’s Growing Group Of Crushers Superior Industries, Inc., a U.S. based manufacturer and global supplier of bulk material processing and handling systems, debuted its brand new Sentry Horizontal Shaft Impactor (HSI) at booth C31389 during CONEXPO-CON/ AGG 2020. It’s one of a dozen new products the company introduced during the Las Vegas trade show in March. Using a high speed impacting force, horizontal shaft impactors encourage stones to break along their natural cleavage lines. This generates cubically-shaped material, which is desirable for many of today’s applications. Superior’s Sentry HSI is designed with a fullyfabricated open-style rotor, which produces low inertia energy for a lower cost of ownership. In addition, proper spacing inside the crusher’s chamber creates more area for

Superior Industries at CONEXPO-CON/AGG 2020 Superior launched a dozen new products for crushing, screening, washing and conveying applications. Displayed equipment included the brand new Sentry Horizontal Shaft Impact (HSI) crusher, Fusion Modular Platform, belt drive Valor Vertical Shaft Impact (VSI) crusher, bolted model Liberty Jaw Crusher, Alliance Low Water Washer and Portable Spirit Wash Plant. Additional equipment with new features include the Anthem Inclined Screen, gear drive Valor Vertical Shaft Impact (VSI) crusher, P500 Patriot Cone Crusher, Aggredry Dewatering Washer and TeleStacker Conveyor. Additionally, aftermarket solutions including new conveyor idlers, pulleys and accessories, plus crushing rotors, cone bushings, cone heads and jaw dies were displayed alongside a multimedia experience showcasing several turnkey projects completed by the company’s construction management division. b

processing larger feed sizes. Owners and operators will safely and easily complete maintenance functions of the HSI’s mainframe components via a hydraulically-controlled opening and closing feature. Other design elements include commonly-shaped side liners, hydraulically-adjusted curtains, mainframe inspection doors and a replacement upper feed opening. One or two piece blow bars manufactured with two or four rotors are equipped with fixed clamping for best performance in hard rock applications. Superior defines its new line of Sentry HSI’s by rotor size and has 15 models available for manufacturing. Production capacities range from 90 - 990 tons per hour (80 - 900 MTPH) with maximum feed sizes from 15 - 40 inches (400 - 1,000mm). Source: Superior

Allu is the world market leader in Screener Crusher Buckets. New and Used Buckets Sales and Rentals Replacement Parts in stock

Page 17

$119,900

2012 DEERE 225DLC C/W 5,200 HRS, PRO LINK HYD. THUMB, Q/C, DIG BKT.

$159,900

2005 CAT D6R XL C/W P.A.T. DOZER, FULL GUARDING, DIFF. STEER, REAR RIPPER, A/C & HEAT, BLADE RE-PINNED & RE-BUSHED, JUST OUT OF SHOP, READY FOR RENT OR SALE.

USED EQUIPMENT & MACHINERY FOR SALE OR RENT 2018 Hitachi ZX35U-5 + ZX50U-5 Cab, Air, Heat, Hyd. Thumb, Bkts ..................................................$FOR RENT 1989 Caterpillar D8N Crawler Dozer, c/w EROPS , full u dozer w/tilt,rear MS ripper, 85% U/C except pads .................................................................................................................................................................. $84,900 1999 Hitachi Ex225 USR LC-5, c/w 2 Bkts, Q/C, Thumb, New Pins And Bushings, End Of Stick, Resealed Contact Valve And Cylinders ................................................................................................................... $49,900 2005 Hitachi ZX330LC, c/w Q/C, hyd thumb, dig bucket 11,000 hrs ..................................................... $89,900 2008 Cat 980H, 14,000 hrs, recent trans., new L4 tires, on-board scale, rent or rental purchase available ................................................................................................................................................................. $154,500 2006 Hitachi ZX350 LC-3 EROPS new rails & sprockets, hydraulic quick coupler, hydraulic thumb, full guarding ................................................................................................................................... CALL FOR DETAILS (2) 2006 Volvo A30D Rock Trucks .................................................................................... AVAILABLE FOR RENT 2002 Cat 980G Loader, new 29.5R25 tires, GP bucket w/BOE..............................................................$109,900 Loader Tires 17.5 x 25 - 29.5 x 25 ..................................................................................................................$POR

★ JAW CRUSHER FOR RENT — CALL FOR AVAILABILITY ★ FOR RENT ONLY 1-800-663-5454 2012 Deere 225DLC 2013 Hitachi ZX135USBL-3

Terex J1170 Jaw Crusher 2018 Hitachi ZX50U-5

2018 Hitachi ZX35U-5 (2) Volvo A30D

MACHINERY SALES & RENTALS • KELOWNA, B.C. PHONE: 250-769-5454 • FAX: 250-769-5005 continentalequipment.ca ALSO IN STOCK:  Filters  Cutting Edges  Bucket Teeth  Equipment Attachments  OTR Loader & Rock Truck Tires

PROUD DEALER OF:

ATTACHMENTS & EQUIPMENT SALES AND RENTALS NEW & USED PARTS CALL US TODAY! 1-844-802-4490

www.arrowwest.com

FMS attachments meet or exceed the competition in quality, ﬁt and ﬁnish with a one year warranty on materials and workmanship.

Page 18

Supply Post · supplypost.com

April 2020

CASE Unveils The Industry’s First Fully Electric Backhoe Loader and lowers emissions. City governments and municipalities will also benefit from the elimination of emissions for working in urban environments and close to other buildings/people, as well as the reduced noise generated by the equipment. Two units have already been sold to utilities in the United States — NYSEG and RG&E, AVANGRID companies, and National Grid. CASE has the capability to produce additional units throughout 2020 before ramping up production to meet greater demand in following years. “CASE built the very first factoryintegrated backhoe loader in 1957 and has been at the forefront of backhoe innovation,” says Leandro Lecheta, head of construction equipment — North America, CNH Industrial. “The 580 EV is a significant

step forward in our commitment to sustainability, the evolution of earthmoving equipment and truly practical innovation that drives real savings and competitive advantages for backhoe owners.” “The backhoe loader is perfectly suited for electrification as the varied use cycles, from heavy to light work, provide an excellent opportunity to convert wasted diesel engine hours into zero consumption battery time — yet provide the operator with instantaneous torque response when needed,” says Eric Zieser, director — global compact equipment product line, CASE. “At low idle a diesel engine has reduced torque and requires time for the engine to ramp up to meet the load demands. Electric motors, on the other hand, have instantaneous torque and peak

339 Sumas Way, Abbotsford

604-850-3601

HYUNDAI’S EXCLUSIVE EDGE LEASE (JANUARY-MARCH) Save Cash with LOW monthly lease payments for up to 60 months! Special rate financing (new mini excavators R17Z-9A thru R80CR-9A)

0% for up to 48 months · 0.99% for 60 months Hyundai compact excavators bring big power to small spaces. Each model features a Tier 4 Final engine that provides impressive performance and reduced fuel consumption. You’ll appreciate the hefty power, durability and reliability of these compact machines, along with their ability to work productively in confined spaces. Call us today to learn more about other Spring Saving available now! For More info on Morooka Rentals & Other Used Equipment available · Call 604-850-4654 FOR MORE INFO CALL: BOB • 604-220-2174 OR HENRY • 604-850-3601 EXT 226

www.handlersequipment.com

CASE CE

Two units to be delivered in Q1/Q2 2020; fully electric backhoe loader will significantly lower daily operating costs, produce zero emissions, reduce maintenance demands and satisfy local/project-based incentives for working with electric equipment/ vehicles. CASE Construction Equipment introduces “Project Zeus” — the 580 EV (Electric Vehicle), the construction industry’s first fully electric backhoe loader. The power and performance of the 580 EV is equivalent to other dieselpowered backhoes in the CASE product line and provides considerably lower daily operating costs while also producing zero emissions — a motivating factor for utility and government contractors incentivized to work with equipment that leverages alternative fuels

The all-new Case 580 EV — The Industry’s First Fully Electric Backhoe Loader

torque available at every operating speed.” The 580 EV is the second major alternative-powered machine introduced by CASE — the manufacturer rolled out the FPT Industrial methane-powered concept wheel loader ProjectTETRA at Bauma 2019. Electrification was performed in conjunction with Green Machine Equipment, Inc. and Moog Inc., and with direct input from utilities and other businesses focused on converting significant portions of their fleets to fully electric backhoes. CASE also partnered with Michelin® to outfit the first-of-its-kind machine with specialized MICHELIN CrossGrip tires for even greater efficiency and handling. Electrification Ideal for Utilities, Urban Environments The 580 EV is powered by a 480-volt, 90-kilowatthour lithium-ion battery pack that can be charged by any 220-volt/three-phase connection. While applications will vary, each charge will support most common eight-hour workdays. The battery separately powers the drivetrain and hydraulic motors, resulting in hydraulic breakout forces equal to diesel-powered machines and improved performance during simultaneous loader and drivetrain operation. Utilities, utility contractors, as well as government and public works operations, are well suited for the 580 EV as they generally have initiatives aimed at lowering emissions, reducing noise in public workspaces, and finding new ways to work within budgets. Contractors who bid work in states where even greater regulations are in place — such as New York, California

and Florida — may also benefit from deploying electric backhoes in their fleet. Many contractors in these sectors either road or trailer these machines back to a central shop or yard at the end of the day, making it easy to plug into existing electrical infrastructure, or to develop charging stations in a controlled yard. Utilities who operate their own backhoe fleets can power each machine off of the electricity they generate, essentially operating the machine at cost. Sustainable for Budgets and the Environment The 580 EV operates with zero emissions — lowering the total carbon footprint for its owners. These are important environmental considerations, but the new backhoe also helps improve fiscal sustainability. While every application will be different based on its workload, it is estimated that the 580 EV could save fleets as much as 90 percent in annual vehicle service and maintenance costs when taking into account the reduction/elimination of diesel, engine oil, diesel exhaust fluid, regular pre-

ventive maintenance and long-term engine upkeep/ maintenance (and the associated labor rates and time savings). Some utilities and contractors are incentivized to deploy electric equipment and vehicles in their fleets, providing even greater financial benefit and further lowering the total cost of ownership. Operating electric construction equipment may make contractors eligible for work they may have otherwise been unable to bid on, expanding their business opportunities and allowing them to win more work each year. While the 580 EV will be sold at a higher initial price than diesel-powered backhoe loaders, it is estimated that average fleets will see a payback on that premium in roughly five years. All savings achieved after that will go to improve the bottom line and continue to lower the operation’s carbon footprint. Each 580 EV comes standard with CASE SiteWatch™ telematics for additional monitoring and management of machine Continued on page 19

Large to small, we do it all! Working harder, so you don’t have to. Stocking new, used, and rebuilt parts and components for most makes and models. Large to small we do it all. FOR SALE:

Rebuilt 3304/3306 engine parts/blocks, Cat loader axles and final drives. Pkg Of Good Used/Rebuilt Cat Haul Truck Components, Call For Details CONSIGNMENT SALE:

• 2016 KW T800 Winch Truck • 2018 Aspen Booster • Cat 966C Wheel Loader • 6-71 Detroit, Good Runner • Cat C-13 • 3306 Take-Out Engine • Set of Cat 320D Double Gr Pads • Kobelco SK-400 MK-4 parts, HD Final Drives, Cylinders, Rebuilt Valve Bank etc • CAT 980 Medford, and Weldco Log grapples JUST IN FOR WRECKING: • Deere 690 & CAT 518 Skidder

Kamloops, BC., CALL GRAHAM: 250-851-1100 | 250-573-4181 (Office/Fax) | bgparts@telus.net www.bgparts.ca

April 2020

Supply Post · Our Readers Are Your Buyers

Continued from page 18

performance and utilization. Historic CASE Backhoe Performance — Improved Operating Environment While the new 580 EV is electrified, it retains many of the hallmark features that contractors expect from CASE backhoe loaders. It retains the precision and efficiency of dieselpowered CASE backhoes with features such as ProControl, which allows for extremely precise boom movement and placement, as well as Comfort Steer, which significantly improves steering while working in tight quarters or in truck loading operations. The machine’s cab is spacious with large windows that provide excellent sightlines to all sides of the

machine. It also features the new and enhanced joystick controls found in the most recent generation of CASE N Series backhoes, as well as in-cab amenities such as premium seat options and Bluetooth radio. All of this is achieved with a machine that significantly improves the working environment for the operator and laborers alike, as it runs with zero emissions, and significantly lowers sound levels on the jobsite for improved communication between the operator and staff on the ground. “The 580 EV performs like a CASE backhoe — matching the power and performance expected from CASE with the advantages of an electrified machine,” says Zieser. “Operators will

FOR RENT

MCCloskey J45 45 X 27 JAW CRUSHER

Langley, BC

Tel: 604-866-0482

NORSTONE EXCAVATING

experience the same digging, lifting and craning performance achieved in a diesel-powered machine in a quieter, emissions-free work area. That’s the ultimate goal of our sustainability efforts — improve the world around us, make equipment more sustainable, and to do so while finding new ways to improve productivity and the experience of the people who use the equipment.” Adding Power and Ease to the Ride CASE has partnered with Michelin on tires for two of its alternative-powered equipment solutions — the methane-powered ProjectTETRA wheel loader, and now the 580 EV backhoe loader. The 580 EV backhoe loader showcased at CONEXPO-CON/ AGG 2020 includes MICHELIN CrossGrip tires that feature a non-directional tread design and provide exceptional handling, comfort and high-load capacity for operation on a variety of surface conditions from asphalt to snow. “The MICHELIN CrossGrip tires are great for general use with construction equipment,

Page 19

and offer great handling and reduced rolling resistance,” says Zieser. “Whether under full load or roading to a jobsite, these tires will provide the optimal match of

power and efficiency for an electric vehicle.” The new MICHELIN CrossGrip is a multi-purpose radial tire designed for use on the road, grass and snow. Using a spe-

Service Centres: Langley, • Chilliwack • Parksville

cial rubber compound, this four-season tire is designed for high-loadcapacity use on loaders, backhoes, telehandlers and tractors. The tire has Continued on page 20

www.rollinsmachinery.com E-mail: jeff@rollinsmachinery.ca

Phone: 604-533-0048

DEMOS AVAILABLE NOW

Other products available contact us today! Johnston Sweepers are available in: • Regenerative Air • Mechanical • Vacuum

Service Centres:

Langley • Chilliwack • Chemainus

1-800-665-9060

QUALITY AFTERMARKET PARTS FOR ALL MAKES ALL MODELS

HYDRAULIC CYLINDER (STICK)

YOUR UNDERCARRIAGE EXPERTS!

HYDRAULIC CYLINDER (BOOM) BOOM

STICK

CAB

HYDRAULIC CYLINDER (BUCKET)

ENGINE (DYNOMOMETER TESTED)

MAIN CONTROL VALVE ATTACHMENTS MAIN HYDRAULIC PUMP

LINKAGE

SWING DRIVE

SWING RING TRAVEL MOTOR SPROCKET

BUCKET

FINAL DRIVE

YOUR WEAR PARTS EXPERTS!

CAB BODY FRONT TRACK IDLER SPRING

BOTTOM ROLLERS TRACK GROUPS

www.essltd.com

SINCE 1946

CONNECT WITH US

Page 20

Supply Post · supplypost.com Continued from page 19

30418 Simpson Road, Abbotsford, BC

(604) 203-6000

james@interquiprentals.com

RENTAL EQUIPMENT

2015 Wacker Neuson 3001 Site Dumper c/w swivel skip. 3,000 kg payload, 25km/hr. (SALE OR RENTAL)

2016 Takeuchi TB260 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

2016 Komatsu PC138US c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

2014 Hyundai R210LC-9 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

2012 Komatsu PC210-8 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

New Holland D85WT Dozer c/w ripper and 6 way blade (FOR RENTAL ONLY)

Wacker Neuson DW60 Site Dumper, AWD Front or swivel tip, 6,000kg payload. Optional cab.(SALE OR RENTAL)

JCB 3TS-8T Teleskid c/w bucket & forks (FOR RENTAL ONLY)

MORE INVENTORY ARRIVING SOON. • Site Dumpers • Skid Steers • Much more!

Check out our website for all of our available rentals

Call for availability 604-203-6000

interquiprentals.com

a patented, non-directional tread for excellent handling in both forward and reverse gears. With 196 tread blocks per wheel rotation, the tire achieves driver comfort by reducing vibration. Asymmetrical lateral blocks help to provide good traction in winter conditions when short starting and stopping distances are imperative for safety. Reinforced for excellent puncture resistance, CrossGrip is designed to offer increased productivity and can be studded for ice usage. “We designed the CrossGrip tire for yearround use — and backhoe loaders responding to utility or municipal demands require that level of availability and performance,” says Justin Brock, senior marketing manager, Michelin North America. “Its unique design provides excellent reliability and traction, helping the industry’s first fully electric backhoe loader road and operate even more effectively in all conditions. We are proud to outfit a first-of-its-kind machine with the first CrossGrip backhoe tires — showcasing two great new technologies for the construction industry.” The Future of Electric The 580 EV is the first formal entry into the electric equipment market for CASE. The manufacturer, in partnership with FPT Industrial, continues to explore additional solutions in electrification, alternative fuels and alternative propulsion systems for equipment across all product lines and industries that help achieve sustainability for all in the construction industry without sacrificing power and performance. These solutions will be introduced and brought to market as industry demand requires. “We’re proving the viability of electrification at the larger end of the compact and light equipment spectrum,” says Zieser. “Our goal now is to further expand electrification and alternative propulsion into other product lines and markets that will also see the benefits from these advances related to sustainability and performance.” b Source: Case CE

April 2020

Nors Group Purchases Strongco; Takes Over Volvo CE Locations Across Canada Nors Group (Nors), a global leader in transport solutions and construction equipment, has purchased Strongco Corporation (Strongco) and will take over its Volvo Construction Equipment’s Canadian dealerships and distribution. The Portugal-based company finalized the deal to purchase Strongco on March 18. Nors is taking over 22 Volvo CE locations, including those in the provinces of Alberta, Ontario, Quebec, New Brunswick, Nova Scotia and Newfoundland and Labrador. With almost 90 years of experience in the industry and operations in 16 countries, including the U.S. and Mexico under its jointly owned company, Ascendum Machinery, Nors has built a reputation as an outstanding dealer that is focused on providing unique solutions to its customers. “We believe that Strongco will benefit from Nors’ global presence and brand recognition, and from its long experience in the automotive and construction equipment industry to further enhance its superior performance and future growth. And we are very much looking forward to working with Volvo CE across Canada,” said Tomás Jervell, CEO of Nors. “We plan on investing heavily in staff expertise, as well as improving parts availability. The goal is to provide the highest uptime in the industry to Volvo CE customers, and we are ready to achieve it.” Nors is the one of the longest-standing partners of Volvo Group. The family-owned company was founded in 1933 by Luís

Óscar Jervell, the current CEO’s grandfather. It began as a Volvo Group partner in Portugal, selling and servicing trucks and buses, and in 1970 it started selling Volvo Construction Equipment products. The US $2 billion company began its global expansion in the 1990s, entering the African market, then North and South America. Nors operates dealerships under the Nors Group, as well as through joint ownership of the Ascendum Group, which is one of the largest distributors of Volvo CE in the world. “It’s fantastic to have such a seasoned partner expanding its successful operations and business model further across North America, and we are looking forward to the improvements they will bring to Canada,” said Stephen Roy, senior VP, Volvo CE North America. “Together we will enhance our Canadian sales and service efforts to improve the experience of our customers when working with Volvo CE. This new partnership has enormous potential.” b Source: Volvo CE

Browse Thousands of Equipment & Truck Listings at

.com

“attachment specialists”

780-962-8586 ATTACHMENTS BLADES angle, straight, & U for all sizes RIPPERS single or multishank for all sizes WINCHES rebuilt, complete for all sizes

EMAIL: CRAWLERSALES@TELUS.NET FAX: 780-962-9465 Edmonton, AB

PARTS NEW, USED & REBUILT PARTS & COMPONENTS

KOMATSU 100 units dismantled CATERPILLAR 15 units dismantled CARCO - PACCAR 75 winches dismantled ALLIED - HYSTER 75 winches dismantled

April 2020

Supply Post · Our Readers Are Your Buyers

Komatsu Introduces Upcoming Suite Of Smart Construction Solutions Tapping into the power of IoT, Komatsu’s construction customers soon will be able to control construction planning, management, schedule, costs, and optimize processes remotely and in near real time with the company’s incoming suite of Smart Construction solutions. Built to support the digital transformation of its customers’ worksites, Komatsu’s Smart Construc-

tion roadmap – introduced during a special event at CONEXPO-CON/AGG 2020 – included 11 new solutions with releases starting this coming year. Smart Construction Design Go from rolled up paper plans to robust 3D designs and more with 3D data generation. Smart Construction Remote Send new design data to

FIRE SEASON IS COMING!

CALL FOR YOUR STAND-BY WATER TANK NOW!!

250-698-7451 · fax 250-698-7421

STAND-BY WATER TANK For remote access fire suppression, will not crush from grapple pressure

CALL

Manufactured and Sold by:

SHILOH ENTERPRISES LTD. Burns Lake, BC.

GEORGE: 250-698-7451

machines in the field, or remotely support operators, without traveling to the jobsite. Smart Construction Dashboard Graphically visualize design, drone and machine data to measure cut/fills, quantities, and productivity. Smart Construction Fleet Collect the data needed to optimize fleets and track production, all on a mobile app. Smart Construction Insight Display an overview of progress, productivity, and profitability across multiple jobsites. Smart Construction Simulation From start to finish, simulate jobsites to optimize results, before the first yard of dirt is moved. Smart Construction Retrofit Equip legacy excavators of any make or model with access to 3D data, giving operators the guidance they need. Smart Construction Rover Cost-effective, high-value 3D rovers to outfit all key jobsite personnel. Smart Construction Drone Provides a bird’s-eye view of the jobsite, in a fraction of the time required by a ground-based survey. Smart Construction Edge Rapid processing of drone data into a 3D terrain map without leaving the jobsite. Smart Construction Field Cost-effective project management that includes cost tracking and helps determine the best ways to bid, manage and resource projects. Since Komatsu customers began piloting early capabilities in 2015, Smart Construction has been con-

necting people, equipment, and construction processes to enhance workflows in an open platform. Supported by its strategic partners, who are leaders in their own fields, Komatsu’s vision is to improve operations across all phases of the construction process by enabling digital transformation of customer jobsites. With Smart Construction, software, hardware, and services come together to help customers be more connected, efficient, and successful. b Source: Komatsu

Page 21

HEAVY EQUIPMENT PARTS & REPAIRS FULL REPAIR FACILITY-FIELD SERVICE • Preventative maintenance contracting • Filters • Oil • Servicing & supplies Servicing all major brands CAT, HITACHI, VOLVO, KOMATSU, DEERE, HYUNDAI

INTERIOR DIESEL LTD. Call today! 250.374.3443 Parts, Service and Sales for Mining, Forestry & Construction. 2045 W Trans Canada Hwy, Kamloops, BC, V1S 1A7

HYDRAULIC BREAKERS

DESIGNED TO HANDLE THE TOUGHEST ROCK EXCAVATIONS AND LARGE CONCRETE DEMOLITION PROJECTS. 3 YR LIMITED WA R R A N T Y

RAMSEY COMPANY INC. Office: (360) 748-8918 | Jim Ramsey (360) 269-3437 | Jack Ramsey (360) 269-0902

DUAL SPEED IMPACT FREQUENCY ALLOWS THE HAMMER SPEED TO BE ADJUSTED FOR MAXIMUM PRODUCTIVITY.

MAGNUM ATTACHMENTS WILL GIVE THE WORKING END OF YOUR MACHINERY SUPERIOR PERFORMANCE AND DURABILITY.

2214 9TH LINE, BRADFORD, ON L3Z 3T1

416.679.8752 | 1.877.640.2862 | FAX 416.679.8753

THE FINEST BUCKETS, SYSTEMS, TRAINING AND DESIGN!

Reach out over 1,500' | Dig to 120' or more! Turnkey systems from 4 - 15 cubic yards! Sand, Gravel, Mud & Slurry - We can dig it!

VISIT US ONLINE: WWW.RAMSEYCOINC.COM

Page 22

Supply Post · supplypost.com

April 2020

“Big box store.” It’s a pejorative term for a place where you shop for everyday items. You don’t go to the big-box store to find distinctive, quality products. A big-box purchase fills a need but isn’t likely to be the kind of thing you boast about to your friends. 592 Lilac Cres., Campbell River, BC V9W 7G6

A big-box purchase is dull. “Dull” also describes the big box building itself. And not just the big-box retail sites. Big-box everything. Office buildings. Schools. Government centers. Big box is tired. It’s common. It’s mundane. It’s boring. Parametric Architecture

SARATOGA

VENTURES LTD. WE SPECIALIZE IN USED PARTS & ATTACHMENTS FOR THE LOGGING INDUSTRY!!

EQUIPMENT FOR SALE: • 2006 Linkbelt 210 Hoe Drill, Machine has 12,200 Hrs. Coastal Drill & Compressor Drill pkg. was put on machine in 2016. There is 765 Hrs on Drill pkg., Hammer is a Atlas Copco 1238 w/ 350 Hrs on it. All the cylinders were done in 2016; when the machine was converted, Pump was replaced 1,500 Hrs. ago, Engine was replaced w/ a new crate engine. Engine has less than 5 Hrs ...........................................................................................$310,000. • 1996 Cat 980F Wheel Loader with Weldco Beales log grapple.... ........................................................................................... SOLD • 1973 Pacific P16 Conventional Log Truck with 60 ton Pacific log trailer, Detroit 12V71N engine, Allison CLBT6061-6 electric shift trans, Clark BD91 drive axles ..............................................$75,000. • Pacific P16 Pre-Load Log Truck (no trailer), Detroit 12V71N engine, Allison CLBT5960-6 air shift trans, 90" track Clark BD71 drive axles ....................................................................... SOLD • 1988 Madill 075 Super Snorkel mounted on a 085 tracked carrier ............................................................................................$80,000. • 1980 15ft Westcoast Winder with a Detroit 471 engine and a Hydro-drive. Both the drive and the engine were replaced in 2017 ......................................................................................$39,500. • 1991 Madill 123 Grapple Yarder. This machine was Remanufactured at T-Mar Industries in 2014, It was re-powered w/a 12.7L Detroit Series 60 and Allison transmission, New rotek, new cab and control system, Winch re-bearing and all gears inspected, Pumps and travel motors done, has been out working for the past two years and has 2,860 hrs on it since it came out of T-Mar .................................................................................$850,000.

Large Scale 3D Printing Parametric architecture, on the other hand, is the antithesis of big box. It is energetic. It is uncommon. It is imaginative. It is exciting. And it is sweeping the business of building design off its feet. Google “parametric architecture,” click on Images, and prepare to be stunned. These extraordinary structures have electrified architecture like nothing else in some time. The thing is, most exist only as designs, exquisite images languishing as 2D dreams on Google’s search results page. Branch Technology seeks to change those 2D dreams into 3D realities. “We build next-generation exterior wall systems,” says Platt Boyd, founder and CEO of Branch Technology. “Our goal is the democratization of custom construction, making it accessible to a broad base of customers.” He cites a lack of innovation in design and construction as the source of the sameness we now endure. “We haven’t moved much beyond the post-and-beam construction that’s been around for ages.” Parametric architecture leaps far beyond post-

CONEXPO-CON/AGG

Why 3D Parametric Architecture And 3D Printing Is About To Boom and-beam. To create these innovative structures, Branch Technology uses another recent innovation: 3D printing, but on a construction scale. Their patented 3D printing process is called Cellular Fabrication and bears the trademarked term C-Fab. The massive printer produces a matrix of polymer in virtually any shape. The matrix is then filled with foam. A piece of the printed matrix the size of a concrete block weighs just two pounds supports 3,000 pounds in compression. Once filled with foam, its compression strength jumps to 6,000 pounds. Reliance on that matrix instead of a solid material means C-Fab uses 20 times less material than traditional 3D printing. The process can be used to create complete structures where the 3D panels are the load-bearing components. But the greatest demand is from the commercial market where the pre-fabricated parts are attached to a building’s

structure during construction and are not intended as load-bearing elements. It is an attached skin with an outer layer of glass fiber reinforced concrete (GFRC) for durability and protection from the elements. The pre-fab panel is four times stronger than a GFRC panel of the same shape and dimensions. Pricing is based on volume and Boyd says Branch Technology ships globally. Because the manufacturing process is managed by computers, Branch Technology can use finite element analysis (FEA) to fine-tune aspects of the manufactured panels to meet local requirements. They have not, however, gone through the lengthy and costly process of getting their products rated in the many performance certifications that exist, such as seismic, hurricane and flooding. The Technology Tipping Point Parametric architecture is wildly popular in the architectural community

right now. But are we at a tipping point where parametric architecture should be part of your business plan? Boyd says if we’re not there now, we soon will be. Here are the three reasons he thinks parametric architecture coupled with 3D printing is poised for explosive growth: 3D printing offers accessible design freedom. Boyd started as an architect, “and all those years I dreamed of having this freedom to create.” Production is enabled by technology and a prefabrication process. Components are built with precision in a controlled environment unaffected by weather, hours of daylight or any of the other limitations present on a typical building site. The end product is beautiful and identifiable. Commercial clients want their buildings to stand out and parametric architecture is the ideal means to make that happen. b Source: ConExpo

Current stock for excavators Parts available for all models & generations!

Refurbished:

Used:

Aftermarket:

Rotary manifolds, hydraulic cylinders, final drives, & more...

Cab assemblies, bucket pins, hydraulic cylinder parts, & more...

Final drives, swing bearings, H-links, & more...

DISMANTLING FOR PARTS:

• Pacific P16 Log Truck and Trailer • Excavator Bkts • Madill Parts: 009, 044, 075 (Rubber & Trk) • Clark Axle Components & Parts: BD 71,000 & 91,000 • Komatsu PC400-5

TOLL FREE 1-888-668-1611 Phone: 250-286-3211 • Fax: 250-286-3284

svl@saratogaventures.com | www.saratogaventures.com

E-mail: usedparts@brandt.ca Inventory: brandt.ca/ValueParts

1-877-685-4886

April 2020

Supply Post · Our Readers Are Your Buyers

Page 23

Unreserved public equipment auctions 22 0+

AR TIC U TR LATE UC D KS DU MP

Equipment financing by equipment experts.

78 5+

DU MP TR UC KS

41 5+

11 5+

CR US HE RS

1 of 2 – Caterpillar D7R XR | Grande Prairie

2 – 2014 Kenworth T800 | Edmonton

92 0+

HY DR AU LIC EX CA VA TO RS

Metso HP300 Cone | Edmonton

2 of 3 – 2013 Caterpillar 740B Ejector Grande Prairie

3 – 2018 Caterpillar 745 6x6 | Edmonton CR AW LE RT RA CT OR S

2 – Komatsu HM400-2 | Truro

2014 John Deere 245G LC | Truro

2013 Caterpillar 328DLCR | Saskatoon

WH EE LL OA DE RS

59 0+

13 5+

MO TO RG RA DE RS

2012 Western Star 4900 | Truro

2014 Caterpillar 14M VHP Plus | Grande Prairie

2012 John Deere 844K Series II | Saskatoon

71,520+ items in 145+ auctions including Saskatoon, SK Truro, NS Grande Prairie, AB Morell, PE Edmonton, AB Toronto, ON

Apr 6–7 Apr 8 Apr 14–15 Apr 17 Apr 28–May 2 May 5–7

IMPORTANT MESSAGE: Due to COVID-19, online bidding recommended. Auction sites to remain open for inspections. Learn more rbauction.com/covid-19

Financing & leasing available Up to 100% financing, with no money down.

2014 Volvo L220H | Saskatoon

Bid in person or online

▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public ▸ Free registration

More items added daily

Call about selling: 1.800.211.3983

See full auction & equipment listings at rbauction.com

MV Dealer No. 4585592, Auction Company License #309645, Dealer License/Licence de commerçant 69767, Auction Company License #303043, MV Dealer #10539 | *OAC. Terms & conditions apply. See rbauction.com

Page 24

Supply Post Â· supplypost.com

April 2020

FEATURED USED EQUIPMENT $38,000

$50,000

15E3277 - Langley 2016 Case SV250 2,292 hrs

21E10021 - Langley

15E3106 - Langley 2010 Terex TA400 3,102 hrs

2E403 - Penticton

2010 Case 580SM 3

2017 Link-Belt 3740PHN

8,448 hrs

4,370 hrs

$325,000

$92,500

$238,000

$389,900

$47,750

$298,000

21E10070 - Penticton

5E919 - Williams Lake

37EFRL100 - Campbell River

21E10022 - Langley

2015 Case CX145C SR

2015 Tigercat H855C 12,268 hrs

2016 Tigercat 630E

2008 Case 580SM3

5,402 hrs

3,490 hrs

9,765 hrs

$425,000

$210,000

37E4115 - Campbell River 2015 Tigercat L870C 5,570 hrs

2016 Case 921F

2018 Tigercat 875

5,483 hrs

929 hrs

$115,000

$86,500

21E10053 - Williams Lake

15E3272 - Langley

2006 Tigercat 860C

2015 Link-Belt 145X3DZ

Estevan 306-637-2121

Fort St. John 250-785-6105

Regina 306-569-9021

Burnaby 604-291-6431 Kamloops 250-374-4406

Saskatoon 306-931-1911

Campbell River 250-287-8878 Kelowna 250-769-2933

Swift Current 306-778-2390

Castlegar 250-365-2807 Langley 604-607-0300

Terrace 250-635-2292

$335,000

21E10026 - Penticton 2012 Case 580SN 4 4,016 hrs

3,999 hrs Brandon 204-728-6681

15E3271 - Langley 2012 Case 850L 2,536 hrs

8E714 - Cranbrook

15E3228 - Langley

$85,000

$92,000

$1,118,000

Cranbrook 250-426-6205 Nanaimo 250-758-5288

Vernon 250-545-4424

INLAND-GROUP.COM

15E3254 - Langley

2016 Link-Belt 4040TLN 6,436 hrs

Dawson Creek (Parts) 250-784-0934 Penticton 250-492-3939

Whitehorse 867-668-2127

Delta 604-952-1280

Prince George 250-562-8171

Williams Lake 250-392-7101

Quesnel 250-992-7256

Winnipeg 204-694-3874

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER

SECTION 2

WWW.SUPPLYPOST.COM APRIL 2020 · PAGE 25

Call Toll Free in Western Canada:

1-888-852-9021

4 SOLID BRANDS SUPPORTED BY 1 SOLID DEALER Powerscreen 320SR Trakpactor

Washing Systems

Terex Washing M1700 3 Deck Rinser

Terex Evoquip Cobra 230 Impactor w/Colt 1000 Screener

Komptech Multistar L3

Washing Systems

www.ForemanEquipment.com

Page 26

Supply Post · supplypost.com

604-940-8210 or 1-800-205-6633

TEREX FINLAY C-1540P CONE CRUSHER

• With Pre-Screen • Available now on Vancouver Island

TEREX FINLAY J1170 JAW CRUSHER

• 2019 Model

April 2020

hello@skreenquip.com

TEREX FINLAY TEREX i-120rs Impact FINLAY I-120 IMPACT CRUSHER CRUSHER

• Detachable recirculating 12’ x 5’ two deck screen

NORDMANN K-750 HOOK LIFT JAW CRUSHER

•Super Compact Hooklift Jaw Crusher

ALL EQUIPMENT AVAILABLE FOR SALE OR RENT TEREX FINLAY 684 screener

• 14’ x 5’ 7” Triple Deck, Cat C4.4

TEREX FINLAY J-960 COMPACT JAW CRUSHER

• 36” X 24“ Jaw / CAT C7.1

7801 Vantage Way, Delta BC

TEREX FINLAY 863 SCREENER

• 9’ X 4’ Double Deck, 40” wide main belt

TEREX FINLAY J-1170

• Used 2014 model For Sale • 28” X 44” Jaw/ Cat C9/ Tier 3

skreenquip.com

April 2020

Supply Post · Our Readers Are Your Buyers

Toll-Free: PHONE: FAX: E-MAIL:

888.900.6869 (24/7) 780.960.9475 780.960.3407 michaelk@contraceq.ca

220 Diamond Ave. Spruce Grove, AB T7X 4C7 www.contraceq.ca

 MOBILE CRUSHING & SCREENING EQUIPMENT  50,000 LBS TO 150,000 LBS  NORTH AMERICAN PARTS & SERVICE HUB  DIESEL-ELECTRIC OR 100 % ELECTRIC SBM MINERAL PROCESSING NORTH AMERICA 650 RT. 112, St. Cesaire, Qc Jol 1t0, Canada P: 800-331-0043 – E-MAIL: americas@sbm-mp.at

www.sbm-mp.at

Page 27

Page 28

Supply Post · supplypost.com

April 2020

Metso’s Nordtrack Mobile Crushing And Screening Received Well By Customers

TELSMITH

TITAN SERIES ™

CONE CRUSHER

Titan™ Series hybrid thrust bearing is a lifetime component that lets you push more amps into crushing and increase production without downtime associated with replacing socket liners. It’s ability to increase your team’s operational uptime & profit is no myth. Available in 4 models as portable or stationary configurations.

Telsmith Dealer - The Groundworx Co. Grant Kergen (780) 887-7123 | grant@groundw.com

www.telsmith.com

Nordtrack crushing and screening product range for the aggregates industry, specifically targeting the general contractors, was launched in October 2019. The new Nordtrack offering consists of 19 products to complement Metso’s mobile crushing and screening solutions. The new Nordtrack products are ideal for general contractors, thanks to their compact size and high performance, combined with an attractive price point. Nordtracks have standard designs for offthe-shelf availability, plugand-play features and they can utilize the extensive Metso support network, making them ideal for a variety of applications like recycling, demolition, and the processing of sand and gravel. “The sales of Metso’s Nordtrack products have taken off as expected, and our customers have appreciated the way we meet the needs of different customer segments with this new

units come with crusher automation. Additionally, the range features six different mobile screens, ranging from heavy-duty scalper Nordtrack S2.11 with a large screening area, two deck Nordtrack S3.7 and Nordtrack S4.7 screens, 3-deck Nordtrack S3.9 and Nordtrack S4.9, to the massive Nordtrack S4.12 big heavy-duty screener. All units are equipped with powerful and fuelefficient Volvo or CAT engines, meeting the latest fuel restrictions, and power take off (PTO), which allows connecting multiple units together. They also feature remote tracking controllers and extra remote controller as standard or as an option for feeder operations, increasing the safety and ergonomics of the operating staff. New additions to Metso family of mobile products are the Nordtrack stacking conveyors which come with a wide-ranging offering of 10 different models with various carry-over capacities and lengths and radial movement possibilities. They are available either on tracks or wheels. b

offering. Metso has sold more than 50 units to date, about half of them to North America. Currently Metso is developing the range further, and new features are still expected in 2020,” says Vesa Tuloisela, Director of Metso’s Nordtrack Product Offering in the Aggregates Business Area. The new Nordtrack offering and Metso’s iconic Lokotracks complement each other, making Metso a leader in the growing aggregates contractor segment. The Nordtrack range features two mobile jaw crushers, the Nordtrack J90 and Nordtrack J127, and one impact crusher, the Nordtrack I908S. The Nordtrack J127 is a wide jaw crusher, with nominal feed opening of 50 x 29”, making it ideal for sand and gravel operations. The Nordtrack I908S mobile impact crusher is a compact size, light-weight recycling crusher that is easy to transport between project sites. Nordtrack crusher Source: Metso

www.genagg.ca

AGGREGATE EQUIPMENT YOU WANT. PARTS YOU NEED. SERVICE YOU DESERVE.

April 2020

Supply Post · Our Readers Are Your Buyers

Page 29

QUALITY NEW & USED AGGREGATE PROCESSING EQUIPMENT FOR SALE OR RENT

2015 MORMAK BUILT MVP450 PLANT Cone was rebuilt with recent inspection showing ,excellent condition. Off plant infeed conveyor with magnet included, Twin 200 HP cone drive motors. ......................................... $385,000 OBO.

KPI 2500 VSI. 2500 VSI Crusher, On Chassis, Fully Self Contained, Discharge Conveyor, completely re-conditioned ..................................... FOR SALE OR RENT!

RADIAL STACKERS: 60’ TO 125’ SUPERSTACKERS: 130’ & 150’ STACKPACKS: 36” & 42” X 70’ ALL IN STOCK & AVAILABLE FOR SALE OR RENT

2017 GOMACO SERIES 4000 SPANIT WORK BRIDGE. Self-Powered. 104’ of deck length. Low hours, very good work ready condition........................... CALL FOR DETAILS.

2005 JCI MODEL 1400LS PORTABLE CONE PLANT. Rebuilt & ready for work, 300 HP WEG, 460 Volt drive motor........................................................ FOR SALE OR RENT

3’ STANDARD SYMONS CONE PLANT New cone with medium liners, 100 HP cone drive motor, Self-Contained with Cat genset & switch gear .......... FOR SALE OR RENT

(2) KPI MODEL FT2650 TRACK JAWS Cat Tier 3 engines, 2,000 hr machines ............................FOR SALE OR RENT!

2018 JCI FT200DF TRACK CONE Very low hrs, 45” cone – 200 HP, Powered by Cummins QSL9 T4 350 HP ......... SALE OR RENT

SANDVIK QE441 TRACK SCALP SCREENING PLANT, S/N: 10057, Cat Tier 3 engine, 840 hrs approx. ................. FOR SALE OR RENT

NEW JCI 6203 PORTABLE SCREEN PLANT Two cross conveyors & under screen conveyor, Hydraulic landing legs. ......................................................... FOR SALE OR RENT

NEW GOMACO CURB EQUIPMENT AVAILABLE. New with quick delivery. .............. CALL NOW FOR DETAILS.

2017 GOMACO SERIES 4000 SPANIT WORK BRIDGES. Non-Powered. 104’ of deck length. Low hours, very good work ready condition........................ CALL FOR DETAILS.

SALES CONTACTS:

William Thompson Hugh Porter 780-474-8082 604-657-7167 Willie@chieftainequipment.com hugh@lonetrack.ca

Equipment (2017) Ltd.

Page 30

Supply Post · supplypost.com

WE SELL WHAT WE KNOW & WE KNOW WHAT WE SELL©

SALES • RENTALS • PARTS OFFICE: 780-463-7077 | CELL: 780-887-7123 email: grant@groundw.com • EDMONTON • CHILLIWACK (604) 991-9779 • SASKATOON • WE SHIP ACROSS CANADA 616 DOUBLE DECK CAT 4.4 ENGINE - 3 PRODUCT CONVEYORS BALL DECK - REMOTE TIPPING GRIZZLY & FEED SPEED.

NORTH N AMERICA BUILT!

FREE DEMO AVAILABLE — CALL TODAY!

NEW 616 DIESEL SCREENER

RENTAL

JCI DRIVE OVER TRUCK UNLOADER

USED TELSMITH SBS 44 CONE

CAT DIESEL GENERATOR SWITCH GEAR TO RUN SUPER STACKER OR ANY CONVEYORS *** UNLOADS A TRUCK IN UNDER A MINUTE ***

2012 SBS44 – 300 HP CONE – 9900 HRS INC. LUBE TK., COOLER, & HYD . PACKAGE INC. COMPLETE CONE INSPECTION

April 2020

Canadian Construction Labour Demand To Intensify Over Short Term Employment in Canada’s construction and maintenance industry is anticipated to grow by 50,200 workers by 2029. When coupled with the anticipated retirement of more than 257,000 construction workers over the same period, the industry will need to recruit more than 307,000 workers over the decade to keep pace with demand, according to the labour market forecast released February 2020 by BuildForce Canada. BuildForce Canada’s 2020–2029 Construction and Maintenance Looking Forward national report forecasts intensifying labour demand commencing in 2020, propelled by major public transportation and infrastructure, utility, liquefied natural gas (LNG), pipeline, and health services projects. New-housing construction is expected to bounce back in most provinces, building on growing non-residential construction and maintenance demands fueled by ongoing

investments in public and private infrastructure and increasing heavy industrial maintenance requirements. “Canada’s construction outlook has strengthened from last year,” says Bill Ferreira, Executive Director of BuildForce Canada. “Our scenario predicts that growth will slow in the latter half of the decade, although labour market challenges are anticipated to intensify as the retirement wave crests and the pool of available youth shrinks.” The most significant growth is expected to take place between 2020 and 2021. British Columbia will remain the fastest-growing market in 2020 and 2021, driven by public transportation projects, pipelines, and work on the LNG Canada project and related pipeline infrastructure. “Meeting anticipated peak employment demands in British Columbia and Ontario will likely require significant levels of interprovincial mobility,”

says Ferreira. “Accessing workers from provinces where market conditions have softened will be critical.” The outlook for the national residential sector has improved significantly, as robust immigration-driven population growth is expected to support high levels of new homebuilding through 2026. That pace of growth is expected to moderate thereafter, as increasing retirements should contribute to lower overall demand for new homes. While new-home construction may soften, renovation and maintenance requirements are anticipated to rise significantly. Overall, total residential construction employment is expected to rise by 17,200 workers over the 2020–2029 period. Non-residential employment demands are also expected to grow throughout the scenario period. The principle driver has been an explosion of major projects in the energy and utilities sectors, public transportation, and other institutional infrastructure projects. Growth in retail and wholesale trade, Continued on page 31

RENTAL

Tel: (306) 244-0423 Toll Free: 1 (800) 667-2025 DOPPSTADT 3060K SHREDDER

30 X 42 JAW PLANT

USED 2015 DOPPSTADT 3060K - 1700 HRS - BIO-POWER - 42 SHAFT TEETH, 495 HP MERCEDES TIER III, MAGNET, HAND HELD REMOTE OPERATION *** 6 MONTH OR 500 HR WARRANTY ***

NEW 2018 MINYU 30 X 42 JAW – VGF WITH VARI-DRIVE – ELECTRIC PANEL INC. RUN-ON-LEGS – BOOSTER MOUNTS

818 43rd St E Saskatoon, SK

CANADA'S ASPHALT PLANT MANUFACTURER

OFFICIAL DISTRIBUTORS OF POWERSCREEN® IN SASKATCHEWAN AND MANITOBA

NEW RAPTOR XL200 IOC CONE CRUSHER Tandem axle chassis, 200HP crusher motor 480V, 36" feed and discharge conveyors, brake and light package, oil cooler, prewired switch gear panel for all motors and

$580,000.00

cone start...............................

USED 2014 POWER VAN

NEW 36 X 100

53’ TANDEM AIR RIDE, DOUBLE WALLED DIESEL TK SWITCH GEAR, INC. 300HP & 150 HP. SOFT STARTS 10’ CAB/TINTED GLASS/A/C/HEAT/ CONSOLE, CUMMINS 500 KW GENERATOR

LATTICE FRAME - TOP FOLD - WHEEL DRIVE, HYDRAULIC R&L - POWER CORDS

NEW WRT 5 X 14 DOUBLE DECK PORTABLE SCREEN PLANT Single axle carrier, brakes, lights, dolly legs, 48" front fines belt discharge and chutes, pre-wired starter panel installed 480V. Call for more info.

RENTAL

WRT “BG” SERIES PORTABLE COUNTER -FLOW ASPHALT DRUM MIXERS Truss-reinforced chassis for maximum stability in both transport and operation,

2238 SCALP JAW

5 X 17’ SKID MOUNTED SCREENER

TELSMITH 2238 HYDRA JAW & 616 MD SCALP DECK. HYDRAULIC JAW ADJUST – SWITCH GAR WIRED TO MOTORS *** SALE OR RENT ***

5 X 17 MOUNTED ON SKID PLATFORM – SWITCH GEAR COMES WITH 3 AUX CONVEYORS ON STANDS *** PRICED TO SELL - $69,900 ***

FINANCING AVAILABLE O.A.C WWW.GROUNDWORX.CA

center-pivot

case-hardened

over-sized forged alloy tires,

trunnions

and

four “run-on”

hydraulic stabilizers. Call for more info.

WRT 4X8 SINGLE DECK SCREEN Complete with motor and sub base 15 degree WRT 4X12 DOUBLE DECK SCREEN Complete with motor and sub base 15 degree WRT 12 YARD EXCAVATOR BOX WRT 10'X14' STATIONARY GRIZZLY 4"X4"X3/8" HSS, 3", 7", 11" spacing standard

IN STOCK IN STOCK IN STOCK IN STOCK

Check out our website www.wrtequipment.com for more asphalt, conveyors, feeders and compaction equipment

April 2020

Supply Post · Our Readers Are Your Buyers

Continued from page 30

the transportation and warehousing sectors, and manufacturing should further boost construction of industrial buildings, while immigration-driven population growth will maintain upward pressure on commercial and institutional construction. Employment in nonresidential construction is expected to rise by 33,100 workers (+6%) over the scenario period. The development of skilled tradespersons in the construction industry takes years, and often requires participation in a provincial apprenticeship program. As such, replacing retiring workers typically requires several years of pre-planning to avoid the creation of skills gaps. By 2029, an estimated 257,100 construction workers, or 22% of the 2019 labour force, are expected to retire. Based on historical trends, Canada’s construction industry is expected to draw an estimated 227,600 first-time entrants aged 30 and younger from the local population, leaving the industry with a possible retirement-recruitment gap of 29,500 workers. When

coupled with demand growth, the industry may be short as many as 82,400 workers by 2029. Clearly, an ongoing commitment to training and apprenticeship development will be necessary to ensure there are sufficient numbers of qualified tradespeople to sustain a skilled labour force over the long term. To meet its growing needs, the construction and maintenance industry will need to increase recruitment from groups traditionally underrepresented in the current construction labour force, including women, Indigenous people, and new Canadians. In 2019, Canada’s construction industry employed approximately 191,700 women, of which 27% worked directly on construction projects. Of the 1.1 million tradespeople employed in the industry, women made up only 4.7%. Similarly, Indigenous people accounted for little more than 4.9% of the total, of which about 81% work directly on construction projects. Increasing the participation of both these groups would go a long way to help the industry address future labour

force needs. New Canadians currently make up approximately 18% of Canada’s construction labour force. Over the coming decade, Canada is seeking to admit an average of 330,000 newcomers

every year, making the immigrant population an important source of potential workers. “The construction industry will need to concentrate on recruiting, training, and retaining young

Page 31 young workers, and expand recruiting efforts for new workers from local labour, other industries, and new immigrants to meet ongoing labour needs.” b

workers, even as peak labour demand slows,” says Ferreira. “Even if the labour market leverages full interprovincial mobility, the industry will still need to be diligent in recruiting, training, and retaining

Source: Buildforce Canada

RLC AGGREGATE EQUIPMENT FOR SALE · RENT · OR RENT TO OWN Call 1-833-706-9458 | Email: info@rlcagg.ca

New 36x150 KPI Super Stacker $325,773 CAD

New 7x20 Cedarapids Screen Plant $392,520 CAD

Fab Tec Contractor Plant 6x16 2 Deck Screen 150 KW Genset P.O.R

New & Used Feeders (2) Elrus 36x42 Feeders Available for Rent

POWER VANS/GENERATORS/SCREENS: New Build, 27-Stations, 400 HP Soft-Start, 6x10 Tower, 1,266 Gal. Enviro Tank, No Gen Set...........................POR Un-used 2015 100kW Van c/w U-Haul Trailer & Used 2015 Cummins 150kW Power Van Electrical ................POR Used 2014 Rebuilt Cummins 600kW 2017 Cummins 600kW 3,640 Hrs. & 2013 CAT C-18 600kW, 7,555Hrs .....POR 2010 Fab-Tec 5x16 Contractor Plant c/w 150kW Gen Set w/ Electrical (3) Extra Plugs .....................................POR New P7203 Cedarapids Screen Plant & Superior 4x8 Dewatering Screen (used 1 month) .............................POR Used 2004 Build, 41 stations, 6x10 tower, u/s fuel tank, Genset optional at customer request .....................POR FEEDERS: Elrus 3642 Feeder, Fab-Tec 4242, Hikon 4242, c/w Hyd. Grizzly .........................................................................POR

FINANCING AVAILABLE OAC

NEW Hikon 3033-12 Feeder Hyd. raise/lower Grizzly $124,755 CAD

New and Used Surge Bin’s (2) Hikon 30 YD Available for Rent

CONVEYORS/SPLITTER CHUTES/BELT SAMPLER/PARTS: New JP Radial Stackers (Hyd. or Elect., 36x40, 36x60, 36x80, 36x100, 42x40, 42x60 .....................................POR New 2018 KPI/JCI 33-36150 Super Stacker & Used 2018 KPI/JCI 36x150 Super Stacker .....................................POR New JP Triple Stack Conveyors, 36x60, 36x70, 42x60, 42x70 ............................................................................POR Used Radial & Transfer Conveyors, 30x50, 30x60, 36x50, 36x60, 36x75 & Kolberg 36x70 Roll Pack .............POR New JP 14 Yard Skid Feeder (Hydraulic Grizzly Option) ......................................................................................POR 2007 30 cu/yd. Surge Bin & 2005 20 cu/yd. Surge Bin ............Available for Rent ...........................................POR Un-used 2017 Hikon 3033-12 Feeder with Grizzly ...............................................................................................POR

View Complete Inventory at www.rlcaggregateequipment.ca

SALES, SERVICE, RENTALS, PARTS | MORMAK.COM

QUALITY AGGREGATE EQUIPMENT FOR SALE OR RENT RENT OR SALE

USED FINLAY C-1540P TRACK CONE

USED FINLAY J-1160 TRACK JAW

MORMAK 1645-II CLOSED CIRCUIT CONE PLANT

USED FINLAY J-1170 TRACK JAW

TESAB I700 TRACK JAW, CAT POWER 28X44

1645C CEDARAPIDS - USED

USED 1145 CONE PLANT

USED 600KW CUMMINS POWER VAN

USED MVP450 CONE PLANT

USED 1145 CONE PLANT

Terex Cedarapids: Cedarapids 1645II Closed Circuit Plant ......................................... NEW (4) Cedarapids MVP380X Cones ...................................... NEW & USED (2) Cedarapids MVP450 Cone Plant ............................................. USED

Mormak HD4248 Belt Feeder ................................................ USED Ecotec 520-3 Trommel ............................................................ POR Ecotec 1600 Trommel .............................................................. POR C400 & C300 Bushing Cone ..................................................... POR

(AB / YT / NWT)

(BC) (AB / YT / NWT)

VERNON, BC 8140 Becketts Rd.

CHILLIWACK, BC 7912 Atchelitz Rd.

CALGARY, AB 8815 44th St. SE

EDMONTON, AB 27321 Acheson Rd.

1-844-MORMAK1

Page 32

Supply Post Â· supplypost.com

April 2020

Used Edge TRM622 Trommel Screen, Hopper with Extensions and Tipping Grid, 48" Feed Belt, 60" Collection Conveyor, 42" Oversize Conveyor with Impact Bars

Used 2007 Metso Lokotrack LT200 Mobile Cone Crushing Plant Nordberg HP200 Cone Crusher 210mm Feed opening Cat C13 415hp Engine

Used 4x10' 2-Deck Screen, Huck Bolted Sides, Inlet Chute, Replaceable Integral Discharge Chute Flushed water system, New water lines, New bull values, New crown rubber

2018 Sandvik QJ341 Track Mounted Jaw 3048 Jaw, 9 cuyd hopper, 39" Discharge Conv, 26" Side Discharge Conv, CAT C9.3 Acert diesel motor power pack

2018 ELRUS 7 X 20 - 3 Deck Screen Plant with 48" Overhead Feed Conveyor, 72" Underscreen Conveyor, 2 Cross Conveyors, Hydraulic Leveling on tandem Axle Chassis

2018 ELRUS 6 X 20 - 3 Deck Screen Plant with 42" Overhead Conveyor, 60" Underscreen Conveyor, 3 Cross Conveyors, Hydraulic Leveling on Tandem Chassis

2016 ELRUS Feeder Screen with MS612 Self-relieving Hopper, Side Dump Grizzly, 36" Feed Belt, 42" Overhead Feed Con, 42" Discharge Con, 3 Cross Conveyors, and Cables

2015 ELRUS Cone Chassis c/w Sandvik 300 H.P. CH540 Cone Crusher, ASRi Automated Cone Control, 36" Feed Conveyor, 36" Return Conveyor, Tramp Metal Protection

Used Cedarapids 3042 Jaw Plant with Discharge Conveyor on Triaxle Chassis

Massive Used inventory Sale !!!! 2008 ELRUS 36x42" Portable Belt Feeder w/ Hydraulic Side Dump Grizzly, 15 cu. yd. Selfrelieving Hopper, AR Plate Lining, 42" Delivery Conv, Tandem Axle Walking-Beam Suspension.

1-877-979-7741

Used Cone Chassis with Allis 4000 Cone New ASRi 2.0, 36" Overhead Feed Conveyor, 42" Return Conveyor, Tramp Metal Protection on Triaxle Chassis.

ELRUS Cone Chassis c/w Sandvik 450 HP Computer Controlled Cone Crusher, 36" Feed Conv, 42" Return Conv, Hydraulic Leveling, Panel on Chassis

www ww w.elrus.com

CLASSIFIEDS

TO PLACE AN AD, CALL 1-800-663-4802 OR VISIT WWW.SUPPLYPOST.COM /ADVERTISE/CLASSIFIEDS

Large inventory of used and rebuilt Detroit Diesel, New & used conveyors, Cat, Cummins, Perkins, from 20’ to 120’, radial or Deutz and Volvo engines. transfer conveyors, quick P.G. Truck & Equipment delivery. TYALTA INDUSTRIES INC. PHONE: 1-800-946-9400 OR (250) 561-1234 PHONE: 1-800-960-9939 1993 Cater pillar 330L Excavator. 27,293 HRS. CRANES EXCAVATORS C / W 2 bu cke t s, H y d . 2013 Hitachi ZX290, 8703 Thumb, Cab Guard, Cat hrs, c/u & dig bucket, walks and Rock guards. hyd. thumb, extra plumb- $39,500 for excavator with Cr ushers, Pulver izers, ing. $129,000. Located in both buckets. Shears! Own or Rent. mr.cleancar@shaw.ca Smithers, BC vanedequipment.com KEVIN: (604) 720-7944 JIM: (250) 287-1214 PHONE: (604) 888-9020 2002 potion HD40A selfPHONE: (877) 255-9293 erect crane w/MMG 55 Magnum genset yard dolCONCRETE EQ. lies, test weights, crane specs: height 75’6” reach 114’10” max lift@ 36’9” 8820lbs max lift at 114’10” 2205 lbs. $110,000. Courtenay Cranes 2007 Caterpillar 345 CL John Deere 135C RTS DAVE: (250) 339-0400 Hydraulic Excavator. Excavator (2006) with 14,138 HRS. C/W Digging CRUSHERS Accurate clean up buck- & C l e a nu p B u cke t w / N e a r n ew Fa s t - Way “Super-Sacker” & Auger, et, accurate dig bucket, hydraulic thumb and rock 10,000 lbs. capacity c/w accurate hydraulic quick guarding. Main Hydraulic load cells & controls, Auger change, accurate pro link Pump rebuilt within last with 460V motor, $25,000 thumb, Brandt cab guard, 250 Hours. $135,000 for OBO. hydraulic blade, complete excavator, with both buckHUGH: (604) 657-7167 brand new undercarriage. ets. Cedar Rapids 45” Classic 8614 hours $68,500. mr.cleancar@shaw.ca CONE PLANT portable cone plant, 125 KEVIN: (604) 720-7944 PHONE: (250) 468-1000 HP cone drive, New standard liners, In & Out belts in good shape, Work ready in good operating condition $135,000. HUGH: (604) 657-7167

ATTACHMENTS

2015 Mormak built MVP450 Plant Cone was rebuilt with recent inspection showing, excellent condition. Off plant infeed conveyor with magnet included, Twin 200 HP cone drive motors. $385,000 OBO. HUGH: 604-657-7167 WILLIE: 780-474-8082

APRIL 2020 · PAGE 33

CONVEYORS

For all your crushing equipment requirements. Sales, service and parts MORMAK EQUIPMENT PHONE: (250) 542-7350 VERNON, B.C.

John Deere 160D LC Excavator (2011) with CWS hydraulic thumb, ENGINES 36” CWS dig bucket, 60” Diesel Engine $5,800, CWS clean up bucket, cab 2006 Mercedes 4000 (OM 460), 450 hp diesel engine, guard, and catwalks. 6073 hours. $129,900. Mileage: 368,540. PHONE: (250) 468-1000 TYLER: (250) 895-9670

WWW.ALBERTAENGINE.COM 64166-426 Ave E Aldersyde, AB T0L 0A0 ENGINE PARTS ENGINES • CALL MARK 403-519-7254 CAT • 3126 .......................................................$2,500 - $4,900 • C7 ...........................................................$4,900 - $6,500 • C7 RB LB .............................................................. $9,500 • C13 NEEDS WORK ............................................... $3,900 CUMMINS • 6BT5.9 ROTARY ................................................... $2,500 • 4BT3.9 RB LB ....................................................... $4,900 • ISL CM554 ........................................................... $5,500 • 4B3.9 .................................................................... $5,000 DETROIT • 4-71 RB ................................................................ $5,000 • 6V92TA DDEC .................................................... $10,900

1-800-361-7333

Ph: 403-720-3494 mark@albertaengine.com

2018 Hitachi Zaxis 300 LC; 1767 hours; thumb plus two buckets; A/C; pattern selector; stump pan; back up camera; serrated cutting edge and new straight cutting edge; auxiliary hydraulics. Parksville , BC 0873123 BC LTD smarston@hotmail.ca PHONE: (250) 713-1363

2005 John Deere 200 C/W bucket and thumb and cleanup bucket. 7200 hrs. $56,000. PHONE: OR TEXT JOHN: (604) 845-6242

2007 Hitachi ZX135US w/ new hyd. thumb, accurate 30” dig bucket, accurate 54” clean up bucket, and pattern changer. 3368 hrs. $69,900. PHONE: (250) 468-1000

2014 Cat 303.5E CR w/ Q/C, clean up bucket, hyd. blade, and new rubber tracks. 2304.2 hrs. $47,900. PHONE: (250) 468-1000

2009 Kobelco SK850, 2050 hrs., sold new at dealers in 2012, equipped w/hyd cwt. remover, pattern changer, aux tool piping, controls, 35’ digging depth. a/c, Komatsu power 496 hp. HD 50” 5 tooth pin on digging bucket. $700,000. OBO Please Phone After 5PM PHONE: (778) 417-0168 PHONE: (778) 417-0017 glenericgr@gmail.com

2007 John Deere 35D w/ 18” Brandt dig bucket, 34” Brandt clean up bucket, Brandt hyd. thumb, hyd. blade, new shor t block engine. 1471 hrs. $45,000 PHONE: (250) 468-1000

2011 Hitachi ZX135US-3 w/ new 30” dig bucket, new 54” clean up bucket, new hydraulic thumb, new Q/C and hyd. blade. 6532.7 hrs. $112,000. PHONE: (250) 468-1000

Now wrecking JD 450D LC. Langley Excavator Parts Exchange Inc. parts@langleyexcavator. com PHONE: 1-888-530-5444

2014 Hitachi ZX135US-5N w/ Accurate dig and clean up buckets, hyd. thumb, hyd. Q/C, and hyd. blade. 5237 hrs. $129,000. PHONE: (250) 468-1000

ZF TRANSMISSIONS & DIFFERENTIALS

Bob’s Diesel Repairs

- REBUILDS & REPAIRS -

Phone: 250-766-3833

Moxy, Terex, Volvo, John Deere, Case

Diesel Generator Sets - 30 kW to 150 kW Units

- specializing in off-highway applications - quality and cost-effective work - on-site testing and troubleshooting - available 7 days a week

Also offering on-site repairs and servicing of all makes of construction and agriculture equipment.

Dolphin Mechanical Services Ltd. Langley, BC - Call Eric 604-314-8032 dolphinmechanicalservices@telus.net

10718 Seaton Rd., Winfield, BC

• • • • • •

50 kW 12 Lead Stamford Perkins 1006 Engine Cat 3304T 75 kW, 12 Lead Cummins 175 kW, 12 Lead Rebuilt Cummins 8.3 Engine JD 150 kW, 12 Lead Cummins, Cat, Detroit Diesel Repairs

Page 34

Supply Post · supplypost.com

Wally’s tires

FORKLIFTS

Quality New Tires & Chains Phone: (250) 833-8349

Evenings (250) 835-4678

Located in Sorrento, BC

MARCHER SKIDDER TIRES & CHAINS • Economically Priced Tires & chains • Fast Shipping • Mounting Available (Locally) • Trade-Ins Welcome

*INTRODUCTORY PRICING* SKIDDER TIRES

2012 Hitachi ZX290 LC-5 w/ 36” Accurate dig bucket, 66” CWS clean up bucket, CWS hyd. thumb, Accurate cab guard, aux. plumbing. 7733 hrs. $129,000. PHONE: (250) 468-1000

• 24.5 x 32 - 20 ply......................................................... $2,500 • 30.5 x 32 - 26 ply ........................................................ $3,200 • 35.5 x 32 - 26 ply......................................................... $4,400

SKIDDER CHAINS • 30.5 x 32 - 3/4” link - Diamond Style .......................... $4,000 • 35.5 x 32 - 3/4” link - Diamond Style ........................... $4,400

Wally’s Private Parts Quality Used Parts

Phone: (250) 833-8349

Evenings (250) 835-4678

Located in Sorrento, BC

RUNNING MACHINES FOR SALE • WCB Clam Grapple ................................................................ $12,000 • 748E skidder, excellent shape, new tires............................... $35,000 • 690E Excavator, good shape with thumb ............................... $30,000 • 320C Excavator with power clam.......................................... $50,000

PARTS MACHINES Skidders John Deere 640D-Just came in • John Deere 848H Skidder • John Deere 648D Grapple Skidder • Burnt 648 GIIIJD Skidder• John Deere 648GII Burnt • John Deere 748GII • International S7 Skidder • S10 International Skidder • 748GII Skidder • 2005 Cat 545 Skidder • 545 Cat skidder, 748GIII, 748GII, 848 JD Skidders • 525 Cat Skidder • 630 Tigercat Grapple Skidder • 518 Cat Skidder• S8, S9 International Skidder • 380, 404, 450, 480, 550, 660 TJ Skidders

Excavators 240BLC Volvo Excavator • 220 Hitachi LC • 230 JD LC • 690E w/ Denarco - 3000Stroker • 210 Volvo w/ 2000 Limmit • 240 Volvo Excavator• 210 Volvo Excavator Burnt • Case 1085 Rubber Tire Excavator • Cat 325L Excavator with 2200 Limmit Stroker • 160 Kobelco Excavator 2004 Burnt • 200 LC Hitachi • 2005 330 LinkBelt Excavator • 325 Cat Excavator• Link-Belt 2800 Quantum 3000 Dewarco • 210 300 Komatsu • 210, 200 Hyundai W/ Harricana Stroker • 330, 320, 325, 322, 225, 235 Cat • Hitachi 270 • Hitachi EX200LC • 220 Komatsu

2007 John Deere 225D LC w/new hyd. thumb, 36” WBM dig bucket, 60” WBM clean up bucket, WBM quick change, 32” triple bars pads, and Isuzu engine. 8390 hrs. $98,000. PHONE: (250) 468-1000 Do you like us on Facebook? Go to this link and like our page today! supplypost.com/facebook

LOADERS (Skid Steer) 2008 Moffett M8 Original owners, Up to date on all ser vices and maintenance requirements. 3469.9 Engine hours. This machine is work ready. $35,000 CAN. Kamloops, BC. lando.mccarthy@hhkam loops.ca PHONE: (250) 682-1457

NEW PARTS for IHC - Dresser - In Stock, including Exchange Transmissions, Steering Drives & Drop-In Motors, Carco Gearmatic Winch Products FULL TRACK PRESS FACILITIES Complete Excavator & Crawler Tractor Undercarriages Berco, Trek & Intertractor

MACHINES FOR SALE

Tracks Running Motors

Large Inventory Of New & Used International & Dresser Parts & All Brands of Undercarriage

Just came in: 860 & 870 Tigercat Bunchers • Madill 2200 Buncher • TJ 625 Buncher • Madill 2800 w/ 360 Head • 630A Prentice Tilter Buncher • 850 TJ Buncher • 950 TJ Buncher • Timberjack 950 Buncher • Madill 2200 Buncher Burnt • 2007 753 JD Buncher(Burnt) • 748GIII Burnt• 618 Buncher • 2628, 608, 618, 628 TJ Bunchers • 630 Prentice Buncher

Crawler Tractors • D8H Cat, D7F Cat, Komatsu D65D

Graders • 686 & 740 Champion Grader • Austin Western Champion D600-760 Tractors • 630B Tigercat

Trucks • 1995 Freightliner, Series 60 Detroit, 470 Hp, 40,000 Lb 410 Ratio Rockwell Axles, Dbl Lockers

Other parts machines • 320 Waratah Head • Coring Hotsaw 20-22 Head • OMEGA 20-20 Ton Hyd. Crane • Crane Ph 20-1A Omega • Denharco 3000-3500 Strokers

Used Tires and Chains • 35.5 x 32, 30.5 x 32, 24.5 x 32, 23.1 x 26 • 18.4 x 34, 26 x 28 • 18.00 x 25 • 14.00 x 24, 16.00 x 24, 20.5 x 25 • 618, 628, D6, D7, 200 • 8.3 5.9 Cummins; 671, 353, 453, 471, 6V53 • Detroit Diesel; 466, 414, 4276, • 4045 John Deere

Visit www.SkidderBuncherParts.com MASTERCARD For More Info & Photos! VISA &ACCEPTED

2005 Volvo L220E, 7 yd, 27,000 hrs, good W/O’s. $74,000. CALGARY: (403) 291-1010

LOGGING CONTRACT

HAMMERS

BROWN INTERNATIONAL SERVICES • • · · • · · • • • • •

Cat 980F. Asking $69,000 OBO. 2004 Cat 980G. Asking $129,000 OBO. Langley, BC. dave@infinitywest.ca PHONE: (604) 240-7977

2013 JD 333D well main., good tracks, snow, tooth buckets, forks. low hrs, FOR SALE REPLACELOGGING Salmon Arm, BC. $57,900. A B L E CONTRACT (Evergreen) PHONE: (250) 793-8492 6 1 , 6 0 0 m 3 A n n u a l l y, GENERATORS LOADERS (Wheel) South Thompson Region, 70 KW 3 Ph. Cat Diesel Conventional – Stump to GenSet fully enclosed unit. Truck, $20.00 m3 OBO P.O.R. Kelowna, B.C. PHONE: (250) 679-8051 Juniper Equipment Ltd. PHONE: (250) 470-8987 LUMBER

IHC H80B, runs well, c/w bucket............................................$10,000 IHC H80B, c/w bucket..............................................................$8,500 D-6 TD15E Grapple ..................................................................$4,500 TD15E Semi-U Blade ................................................................$4,500 D-7 17A machine, not running .................................................$3,500 TD20 E/G double angle tilt blade.............................................$3,500 Cat D8K Beales brush rake.......................................................$6,000 SOLD TD15C Beales brush blade .......................................................$4,000 TD15C Winch, Carco F50..........................................................$3,500 TD20G-20E Grapple ..................................................Reduced $5,000 TD20E GUTO DVT 800 engine ...................................................$9,500 Dresser TD9H/D39/TD10M, 39 link, rails, c/w 22” pads, new take off, track fit ..............................................................................$5,800 · Dresser TD20E/G 42 Link Track Grps, c/w new 26” SS pads .......................................................................................... IN STOCK · Komatsu PC300, New rock guards ...........................................$1,200 • Cat D7 17A Pup Engine ............................................................$2,500 · 924 Cat, New QA coupler, Weldco Beales ................................$1,500 · New Hitachi EX200, thumb, Wajax ...........................................$3,800 WRECKING: Hitachi EX200LC-1 c/w good tracks, thb, boom, final drive; IHC S8A Skidder; Cat D7 17A; Komatsu D85E-18, good U/C; TD20C

Bunchers

1995 Hitachi EX300-3, burnt, parting out; 1999 Hitachi 330-5, burnt, parting out. 2000 Hitachi 370, burnt, parting out. PHONE: (604) 240-7977

2005 Cater pillar 938G Series II Wheel Loader – FEEDERS 8,264 HRS. C/W Bucket, 12 Foot Snow Blade & Chains. (Snow Blade & chains only used 1 seaHammers to fit your carrier! son). $65,000 for the loader. $13,000 for the snow 20 yard surge bin, In & Out Own or Rent. blade and chains. 36” conveyors, Ready to vanedequipment.com mr.cleancar@shaw.ca work!. $32,000. OBO PHONE: (604) 888-9020 PHONE: (877) 255-9293 HUGH: (604) 657-7167 KEVIN: (604) 720-7944

Loaders Log: JD 2054 Log Loader, • 330 Cat Log Loader with Thunderbird Log Loader • 644A Jd Loader Wheel: • 125 Clarke Wheel Loader • Terex 8231 Loader

April 2020

“We Service What We Sell” Ph: (250) 546-6518 • Fax: (250) 546-3100 www.brownihc.com |E-Mail: info@brownihc.com 4274, Box 557 Hwy 97A North, Armstrong, B.C. V0E 1B0

3” & 4” Lowbed decking up to 24’ long. 2x8 truck decking 12’ to 24’ long. 2x6x8’ D. fir k. dry $5.49/ea. 2x4x16’ k. dr y $6.49/ea. 2x10 k. dry 8’ to 20’ $1.10/ft. Bridge timbers cut to size. Poles for pile driving, any size. Metal roofing and wall cladding. We deliver “even to the moon’. can-ambuildingsupply@ shaw.ca CAN-AM LUMBER MILL PHONE: (604) 580-1415

FOR SALE Pictures Available LOW BED TRACTOR; 2012 PETERBILT, 280,000 km, pac car engine, 18 spd, 46 double lockers, excellent condition, clean. .......$ 69,000. 2007 FL M2 SERVICE, 106, 4 x 4, brutus body, 8800 cobra crane, 325 miller, 40 cfm van air comp. Work ready ............. $ 95,000. OBO. MADILL 0-99 YARDER, working condition ..........................$ 150,000. 1980 MADILL 071 YARDER on rubber, 6V92TA four axle carrier, 4 guy lines, new paint work ready. c/w Maki 11 carriage ..........$ 150,000. 2 - VOLVO A25C ROCK TRUCKS 12,000 to 15,000 hrs with various new components, working con. .............................................$ 55,000. 2012 HITACHI ZX 350 EXC. with 5500 hrs ................. $190,000. OBO. 1996 CAT 330L EXC. 10,700 hrs, FOPS, thumb, very good u/c, good working cond ............................................................................ $ 50,000. 1995 HITACHI ZX 330, 10,000 hrs, thumb............................... $ 45,000. MORBARK 1000 TUB GRINDER, working cond. .................. $ 87,500. LARGE ASST. OF USED ROCK TRUCK TIRES 750/65 x R25, 23.5 x 23/20.6+ x 23, 15 to 30% ............................. PICTURES & P.O.R. D10 N/R/T TRACK RAILS, 1 set at 80% ..................................$ 12,500. 1 - PAIR OF 29.5 X 25 LOADER CHAINS, 75% ..........................$ 1,000. 3 SETS OF DRYLAND SORTING BUNKS........................... $ 1,000. ea. 2 - WAGNER LOG LOADERS, L4130C & L 90, both in working cond. phone for info and price............................................................. $CALL. JRB HYD. PIPE GRAPPLE with quick change 72 inch. x 106 inch, as new.......................................................................................... $ 4,500. VOLVO L 150 E, hyd. pipe forks with q / c sliding forks, 64 inch x 106 inch. as new ................................................................................ $ 3,500. NEW KOBRA HYDRAULIC DRYWALL FORKS ........................$ 1,350.

~HOPE MECHANICAL SERVICES~ Phone, Text or Email · easyhope@yahoo.com

Glen at 604-795-6827, Ray at 604-860-3000 HEAVY DUTY MOBILE MECHANICAL SERVICES

Contact Reed at 604-869-6222

April 2020

Supply Post · Our Readers Are Your Buyers

PROCESSORS

PARTS Used Parts for Older Low Drive Caterpillar Tractors Engine par ts, transmission par ts, cross shaft and steering clutch parts, and final drive parts for Cat D6 9U, D6C, D7E, D8 14A, D8H, and D9G. Track frames available for D8H and D9G. Pads available for D7E/F/G. Track groups available for D9G/H tractors. Some accessories available. Classic Iron Construction Ltd. PHONE: (403) 783-1383

Can’t find what you are

SAND SCREW

looking for? Thousands of

Page 35

SCREEN PLANT

more machines and equipment for sale on: 2012 Terex Finlay 683. 6’

www.supplypost.com

2017 Tigercat H855D, 7550 hrs., Southstar QS500 Head included. $415,000. Calgary, AB Quinex Contracting Ltd. quinex@shaw.ca PHONE: (403) 804-2568

PLACER CLAIMS

Used 36” single sand screw. Good operating condition. Asking $28,500 HUGH: (604) 657-7167 Equipment For Sale Online – We have thousands of equipment & trucks for sale at SupplyPost.com! Log on today... www.supplypost.com

x 13’. 1764 hours. Sizing

SAWMILLS

Screening Plant Caterpillar Powe r s c r e e n

4 cylce diesel, levelling

Chieftain 1700P, Features

cat walks, remote grizzly.

2017

PORTABLE SAWMILLS INDUSTRIAL SAWMILLS BLADES

BLADE

MAINTENANCE. PHONE: (877) 866-0667

a 16’ x 5’ incline screen deck, on board CAT C4.4 Tier 3. Hydraulic tipping grid. For sale or rent. Foreman Equipment Ltd PHONE: (888) 852-9021

TRACK READY TO GO TO WORK. Located in Yorkton Sask. $160,000. acelectric6@gmail.com. PHONE: (306) 621-6420

LINK PARTS LTD. S E R V I C E

E QU I P M E NT

FELLER BUNCHERS

2016 Hyundai HX3300L with SouthStar QS630 Placer Gold Claims — processor. 8303 hours, Timed Auction. 12 claims HHKHK901LG0000099 / near Rosella Creek, BC, 630-019, great condition, includes all equipment. ready to work. $329,000 (D8 Cat, 225 Cat Backhoe, CAN, $249,000 USD. 950 Cat Loader, Gardner Woodland Equipment Denver jig (fine gold), PHONE: (250) 372-2855 gold plant, small generaSAND & GRAVEL tor, 36” gold wheel, 2x16 shaker table, storage bus, Quality, built in BC to your quad.) +\-1185.56 ha / specs, Screen Decks 3’ x 2929.59 acres. Bidding is 5’ to 5’ x 10’, Conveyors, open 10am July 15 to 5pm Feeders, Placer. Kelowna, July 22, 2020. More info at BC. Juniper Equipment Ltd. teamauctions.com or call JOE: (780) 886-7033 PHONE: (250) 470-8987

COASTAL PACIFIC EQUIPMENT coastalpacificeq@gmail.com

1-800-811-6911 • (250) 392-7755 685 South Mackenzie Avenue, Williams Lake, B.C. V2G 1E2

2008 Dressta TD9M w/6 way, Encl. Cab, 3,208 hrs ................................................................ Huge Savings! CALL 1990 TD15E - Angle or Semi-U blade ............................. CALL 2013 Dressta TD 15M, 1,378 hours, w/6-way blade, ripper or winch ............................................................................... CALL 1987 Dresser TD20G with angle blade & ripper ................................................................. FOR SALE OR RENT 2009 Dressta TD20M LT, Ripper, Cab, new motor, trans. & U/C................................................................................... CALL 2012 Dressta TD20M LT 7,890 hrs - Excellent Cond. .... CALL 1981 Dresser TD25E with A/Blade, Ripper .................$35,000 1996 Dresser TD25G A-Blade, Cab, Ripper New U/C .$90,000 2004 Dressta TD25H 8,000 HRS ............................. $135,000 Timberjack 520 Swing Grapple, 24.5 x 32 tires, rebuilt trans. .....................................................................................$22,000 2015 Case SV300-2 Skidsteer, 2,535 hrs ... Huge Savings! CALL 1994 Cat 320EL, with thumb & guarding .......................SOLD

MISCELLANEOUS · · · · · · · · ·

TD9, TD10, TD12, TD15C, TD15E, TD25C-E rippers TD12C, TD15C-E, TD20E-G-M clearing rakes TD20E-G-M, TD25E-G Semi U blades TD25C-E-G Full U Blades · CAT D7G Blade & C-Frame Dresser 530 GP bucket · TD15C-E, TD20E-G winches Timberjack JD853 used track group Cummins 5.9 (CPL 938) 28L x 26 LS-2 tires New & Used parts for IH-Dresser-Dressta- JD648EKomatsu D65E · Wrecking Dresser 520 wheel loader, Samsung 210LC · JD748G3 Grapple Assy and Tigercat 630D Grapple Assy

Check us out on Facebook!

2015 John Deere 959K 4,500 hrs FR24B Head .................................. $249,900 2006 John Deere 909J 11,000 hrs 22" Head ....................................... $74,900 2014 Tiger Cat 870C 6,500 hrs 24" Head ......................................... $243,900 PROCESSORS 2002 John Deere 2554 Waratah 622 Warrior Head .............................. $49,900 2006 Madill 1800 Waratah 622B Head ............................................. $134,900 2016 John Deere 2954D Waratah 624C Head .................................. $424,900 LOG LOADERS 2013 John Deere 2954D 14,000 hrs Tmar Heel & Grapple ................ $129,900 2014 John Deere 2954D 11,000 hrs Tmar Heel & Grapple ............... $149,900 1996 Hitachi EX400LC-3..................................................................... $29,900 2012 John Deere 3754D 11,000 Hrs $75,000 in Repars & new UC ... $219,900 1998 Hitachi EX270-5LC Clam .......................................................... $34,900 2002 Caterpillar 322C FM Clam ........................................................ $54,900 2016 Madill 3800C Tmar Heel & Grapple ......................................... $399,900 2003 Kobelco SK370 Heel & Grapple ................................................. $34,900 2001 Caterpillar 330B FM Heel & Grapple .......................................... $59,900 2013 John Deere 3754D 7500 Hrs Tmar Heel & Grapple .................. $149,900 EXCAVATORS 2006 John Deere 3554 w/ Digging Bucket ......................................... $44,900 1995 Caterpillar 330L RB Back Spar hoe w/ Digging Bucket ................ $21,900 2007 John Deere 450DLC w/ 48" Digging, 84" Clean Up, Ripper ......... $74,900 2002 Caterpillar 330B w/ Digging & Clean Up (Heel and Grapple sold seperatly) ............................................................................................................ $49,900 WHEEL LOADERS 1985 Caterpillar 988B Log Grapple .................................................... $38,900 BULLDOZERS 2002 Hitachi DX75M ............................................................................ $24,900 1990 Caterpillar D5H LGP ................................................................... $38,900 GRAPPLE YARDERS 1983 Madill 044 .................................................................................. $99,500 1986 Madill 122 ................................................................................ $399,500 1975 Washington 78A ........................................................................ $98,900 SKIDDERS 1994 Timber Jack 480 Grapple Skidder ............................................... $18,900

1977 John Deere 640 Line Skidder ................................................. $5,900 DRILLS

Caterpillar M40 Tank Drill ................................................................. $34,900

WE HAVE MOVED TO KELOWNA! EQUIPMENT FOR SALE 1997 CAT 980G WHEEL LOADER ....................... $44,000 1998 CAT 966F WHEEL LOADER . ...................... $75,000 2001 SD70D INGERSOL RAND PACKER 1,200 HR $36,000

COMPONENTS FOR SALE CAT D6D REMAN TRANSMISSION O/R .................. $7,000 CAT 325C,D FINAL DRIVES ................................. $10,900 CAT 325D FM FINAL DRIVES ....................................CALL CAT 330D FINAL DRIVE ...................................... $12,500 EX330LC-5 FINAL DRIVE .................................... $10,500 EX330LC-5 FINAL DRIVE W/MOTOR ................... $14,500 ZX330LC NEW FINAL DRIVE W/O MOTOR. ............ $9,500 JD2154D COMPLETE FINAL DRIVES .........................CALL JD2154D TENSIONERS ............................................CALL JD2154D ALL CYLINDERS ........................................CALL JD748E USED ENGINE ......................................... $1,500 JD748E USED FRONT AXLE .................................. $1,500 TCAT 860C UNDERCARRIAGE 70%. ..........................CALL TCAT 870C 5701 HEAD ............................................CALL TCAT 870C 5702 HEAD. ...........................................CALL TCAT 870C FINAL DRIVE W/ MOTOR USED ......... $10,000 TCAT 870C GUARDING .............................................CALL TCAT 870C BOOM CYLINDERS .................................CALL TCAT 870C TENSIONER W/IDLER COMPLETE........ $3,900 2010 622B WARATAH HEAD .....................................CALL CAT D8N,R,T TRACKS 70% PADS ON NEW CHAINS ........................................................ $15,000/PR. CAT 330 49L TG’S 31.5” 3 BAR NEW CHAINS 90% SHOES. ................................................ $11,000/PR.

LOADER TIRES-SPECIAL PRICING

OFF HWY LOGGING TRUCKS 1970 Kenworth 850 Off Hwy ................................................................ $29,900 1974 Hayes HDX45-115 .................................................................... $59,900 1964 Hayes HDX45............................................................................ $39,900 1980 Pacific P16 ................................................................................ $59,900 SELF LOADERS 2007 Kenworth T800 ........................................................................... $34,900 MISC TRUCKS

2006 John Deere 250D ADT, Rock Truck ...................................... $64,900 1979 Ford F600, Fire Truck ......................................................... $11,900 1996 Peterbilt 377, Fuel Truck ...................................................... $11,900 CREW BOATS 1984 West Bay 24' 8 Passengers........................................................ $58,900 1998 Coastal Craft 25' 12 Passenger ................................................. $79,900 1984 Grady White Twin 150 Yamaha Outboards .................................. $29,900 TUG BOATS 1956 S. Madill GM 671 ........................................................................ $34,900 OTHER

Powder Mag Rebuilt with-new door .......................................... $11,900 53' Shop Trailer Loaded -- Hose Press ect. ............................... $39,900 PARTING OUT - CALL FOR PRICING 1999 Tiger Cat 860 Feller Buncher • 2005 Hitachi ZX350 FM Log Loader 2000 Hitachi EX350LCH-5 Excavator • 1991 Avelny Barford RXD28 Rock Truck

linkpartsltd.com Cell: 604-240-7977 | Office: 604-882-0004

20.5X25 L3 24 PLY ....................................... $3,500/SET 23.5X25 L3 24 PLY ...................................... $4,995/SET 26.5X25 L3 28 PLY ...................................... $9,200/SET 29.5X25 L3 32 PLY .................................... $12,900/SET •

WE SPECIALIZE IN NEW, USED AND REMAN REPLACEMENT PARTS FOR ALL MAKES AND MODELS. CAT, JOHN DEERE, HITACHI, VOLVO AND MANY MORE.

•

UNDERCARRIAGE NEW AND USED

•

GROUND ENGAGING (CARBIDE INFUSED OPTIONS AVAILABLE)

•

FINAL DRIVES HITACHI/JOHN DEERE/CAT IN STOCK

•

METRIC AND STANDARD BUSHINGS AND SHIMS

NOW DOING PAD SWAPS FOR UNDERCARRIAGE WE CAN PICK-UP & DELIVER CALL CORY 778-753-7353 | 250-320-4070 cory@hdpartsltd.com

www.hdpartsltd.com

Page 36

Supply Post · supplypost.com

TRAILERS

TRUCKS (Off Hwy)

2009 Doepker Dumpers

Powerscreen Commander

Clam, Tri Drive, Tri Axle 2019 Ram 5500 4x4 SLT Clam with Air Ride and D i e s e l S e r v i c e Tr u c k

510, Deutz diesel, low hrs.

1,759, double deck, shred- 79/91 Pete, fresh DD4 E l e c t r i c Ta r p S y s t e m . der, hyd. Grizzly, Great 14Lt. ,18918, new clutch, $45,000. Sicamous, BC. cond., $79,000. CAN., new driveline, 411’s with cal_kanngiesser@telus.net locker, new SI scales, new PHONE: (250) 319-6681 OBO. Also available attach14600 ft. axle, 7” exhaust, able 5032 hyd. radial stack16,400 tare, separate? 1983 Knight Booster, Good er. Pitt Meadows, BC btmehl@telus.net

$59,000. PHONE: (250) 640-1055

LNH EQUIPMENT

condition, $10,000 obo

PHONE: (604) 626-1360

TRUCKS

(#25080) - 6.7L Cummins Diesel Engine, 6 Speed Aisin Transmission, SLT trim, Remote Start, B/U Camera, Aluminum Rims, Shift on Fly 4WD, Vinyl Flooring, Luxury Group, c/w 11’ Brutus Aluminum VR70

C o m p r e s s o r,

Cobra 5500RSE Crane, B r u t u s D rawe r Pa ck s,

CALL TODAY

Available for sale/lease/

24” Workbench Bumper, long-term rent. Calmont

EXCAVATORS / PROCESSORS / LOADERS guard, dozer blade, recent rubber tracks ............................. $39,500

D SOL D SOL

2013 Takeuchi TB153FR 6.5 ton, 1,800 hrs, dozer blade, hyd. quick attach, wrist/dig bucket, hyd thumb, new tracks, full cab heat & A/C ........................................................................................... $49,500 1991 Case 590, 4 x4, 4 in 1 bucket, 2 stick backhoe controls, extendahoe, 1 dig bucket, runs and works well. hour meter not working .............................................................................. $24,900 TRUCKS & TRAILERS 2016 Peterbilt 567 Tandem Tractor, 330,XXX kms, Cummins ISX15 550, 6,500 hrs, RTO 201918B 18 spd, 16K front, 46K rear, 4:10 ratio, lowbed ramps, scale pads, 36” bunk w/heat & A/C, 24.5 rear rubber, new 385/22.5 front rubber, current CVI, very clean & well kept............ P.O.R. 2003 Komatsu HM350-1 Rock Truck, 13,000 hours, recent transmission work, straight clean unit. Will rent .................. $59,500 2009 Freightliner M2 Plow/Sander, Cat C-13, Diesel Allison auto trans, front plow and rear sander, ex municilality, current AB certification, great shape! ...................................................... P.O.R. 2007 International 7500 vac/septic truck, 247,000 kms, 11,400 hrs, 13 spd., heavy spec, 20,000lb, front end, very good rubber, VIN#1HTWNAZT27J47860, hyd. open rear tank door., FT&M RCF 1200 vac pump .................................................................. $35,000 2005 Western Star T/A Vac Truck 346,069 kms, 18 spd, 13,628L steel tank, series 60 Detroit, new hi-bon vac pump, heavy spec, lots of work orders .................................................................... $52,500 FINAL DRIVES Link-Belt 240 LX final drives with drive motors ................... P.O.R. Cat 315 Final Drive Complete w/Propel Motor ........................CALL ATTACHMENTS 2003 Waratah 622 Processing Head, can be seen running, no breaks or welds, complete with everything ...............Open to Offers Complete Hyd. Thumb off Volvo 240, includes all parts & brackets ............................................................................................. $4,500 Various Excavator buckets to fit all size machines ................CALL 2014 Hyundai 210-9 Forester burn unit for parts ...................CALL Recently In – 2004 Volvo 240B Forester – Burnt Unit, will sell complete or parts; c/w Q/A, dig bkt & hyd. thmb ......................CALL 2004 Volvo 210B Forester Burnt, complete or parts................CALL Volvo A40C complete, for parts ...............................................CALL Hitachi EX200-1 • Cat 330 BL ................................................CALL

TF: (844) 849-4257

www.lnhequipmentltd.com for complete inventory and pictures

Leasing your #1 Service 2020 Freightliner M2-106,

Truck Provider directly for

Cummins B6.7 300 hp With

more information. Allison 2500 Rds, 12,000fa juri.rastovski@calmont.ca 2 1 , 0 0 0 r a H y d r a u l i c JURI: (780) 907-4761 Brakes. Rigged With Fort

1994 Volvo A35C 6X6 Ar ticulated Dump Truck C/W Retarder – 19,011 2013 Terex TA400, 3,102 HRS. $41,500. H r s , S t k # 1 5 E 3 1 0 6 . mr.cleancar@shaw.ca KEVIN: (604) 720-7944 $238,000. Langley, BC. Equipment For Sale Online See page 24 for more. – We have thousands of Inland Group equipment & trucks for sale l a n g l ey s a l e s @ i n l a n d at SupplyPost.com! Log on group.com today... www.supplypost.com PHONE: (604) 607-0300

S e r v i c e B o d y, V M AC

LOOKING TO BUY USED EQUIPMENT • ALL CONDITIONS • TOP PRICES PAID

2007 Komatsu PC78MR-6, 2 buckets & thumb, 7,800 hrs, window

April 2020

Equipment For Sale Online

Fabrication Ampliroll Hook

– We have thousands of Lift. In Stock And Ready equipment & trucks for sale For Work! at SupplyPost.com! Log on P&R Truck Centre

today...

ED MURRAY: (250) 812-2925

www.supplypost.com

MERLIN’S BUY & SELL

Sexsmith Used Farm Parts Ltd. Sexsmith, AB | www.usedfarmparts.com E-mail: farmpart@telusplanet.net

DISMANTLING: EXCAVATORS: Komatsu PC228USLC LOADERS: Case 621, JD 644C, JD 544B, IT14B Cat, W14, Case W20, Case W20C, MF 33D, Case W14B, JD 544 CRAWLERS: Komatsu D53A, Case 1150B, JD 450C, Cat D7, Cat D82U FORKLIFTS: IHC 4500, MF 6500 • GRADERS: Champion 720A SKIDSTEERS: Cat 297, Gehl 4625, Melroe Bobcat 943, 863, 853, 843, 610, Case 1845, 420 NH BACKHOES: JD 610T, JD 310D, Case 580B, Case 780, Ford 575E TRENCHERS: Case 860 PACKERS: Bomag BW213 PDH-2 A LARGE SELECTION OF TESTED DIESEL ENGINES CUMMINS, CAT, PERKINS, JD & CASE

1-800-340-1192

Buying Equipment For Dismantling

TRUE NORTH EQUIPMENT INC.

I BUY, SELL & CONSIGN EQUIPMENT • BUCKETS • BRUSH RAKES RIPPERS • GRAPPLES • POWER CLAMS BOOMS • TIRES • ENGINES • TRANSMISSIONS UNDERCARRIAGE • SURPLUS PARTS

1-780-722-8129 · www.truenorthequipment.ca

MERLIN GISE 250-819-4444

2005 Deere 850J Dozer, 6-Way Blade, Ripper, Cab w/ Brush Guards, 50% U/C, 8,000 Machine hrs., 2,000 hrs. on New Engine .........................................................................$103,500

merlin.gise@shaw.ca

966C Bucket Machine ....................................... Call Brush Rakes - thumb, cyl & mount - 250 series .......................................................................... $5,000. Brush Rake - 250 Series 66” CWS .............. $4,500. Brush Rake - 48” ........................................... $2,000. Bucket - Clean Up, 30” New........................ $2,000. Bucket - 200 - 36” WBM QA New .............. $3,750. Bucket - Chip - 12 Yd .................................... $6,000. Bucket - 920 - QA .......................................... $2,000. Bucket - 950 - Pin on..................................... $2,500. Bucket - 966C - Pin on .................................. $2,500. Bucket - 966F - Pin on................................... $4,500. Bucket - 966G - Pin on .................................. $6,500. Coupler - 920 - As new ................................. $1,500. Coupler - 930G/924 - New ............................ $3,000. Boom - 920 Complete.................................... $2,500. Boom - 936...................................................... $1,500. Boom - 950...................................................... $1,500. Ripper Shank - Cat D7 .................................. $1,000. Ripper Shank - Motor Grader - New ............ $500. Grapples - 966D, E, F - 966C .............................. Call Eng. Core - 3306DI High Hour ...................... $4,000. Differential - 966F - Rebuilt ........................ $17,500. Differential - 966G - Rebuilt ....................... $18,500. Tires - New - 23.5 x 25 .................................. $1,500. Tires - Used - 20.5 x 25 Michelin ...................... Call Tire Chains - 17.5 x 25 & 20.5 x 25 .................... Call

LOTS OF NEW & USED PARTS FOR OLDER CATERPILLAR EQUIPMENT

2007 Waratah 624B Harvesting/Processing Head .......$49,500 2010 Deere 2954/Waratah 624C, 18,000 Hours .....$90,000

Weldco 250 Series 40” Excavating Bucket, 5 Teeth, Kat Lugging ...........................................................................$3,995 2016 Tigercat 870C Feller Buncher, 7,400 Hrs .......$395,000 Hultdins SG520S Grapple, c/w GVS173 Rotator ..........$6,950 2012 Hyundai 210LC-9, Waratah 622B Processor, Forestry Cab, Guarding, High Walker, 19,981 Hours ..................$89,500 2012 Hyundai 250/Southstar 585 Processor, 6750 hrs ....................................................................................$220,000 2000 Prentice 620, Quadco 5600 head, newer engine & undercarriage ...............................................................$93,500 2009 TimberPro 830B Combo, Shortwood Bunks, Hultdins Grapple, Tracks, 9,649 hrs ..........................................$208,000 2011 Hyundai 250LC-9 Excavator, Q/C, 2 Buckets, Hyd. Thumb, 2,300 Hrs.......................................................$135,000 2012 Hyundai 210LC-9/LogMax 7000XT, 13,332 hrs. ...........................................................................$114,900 2018 Ardco AMT 600 Articulating truck ................... $POR

April 2020

Supply Post · Our Readers Are Your Buyers Can’t find what you are looking for? Thousands of more machines and equipment for sale on: www.supplypost.com

2008 Volvo A30E 6X6

WANTED

WANTED – BARGE RAMP. Steel 40’ x 14 ‘ + or – Must 14,320 HRS – Motor Just be good condition. BC. Rebuilt less than 250 Hrs Gravity Towing Ltd ago. C/W Retarder, low ericfryer@shaw.ca PHONE: (604) 556-1884 profile tires & chains, and box heater. $135,000 for Equipment For Sale Online – We have thousands of the truck and $2500 for the equipment & trucks for sale chains. at SupplyPost.com! Log on mr.cleancar@shaw.ca today... KEVIN: (604) 720-7944 www.supplypost.com Articulated Dump Truck –

AMIX GROUP SURPLUS Jim Murphy • 1-844-505-4105

• Liebherr 586 Wheel Loader ...$285,000. • Craig 18 Yard Chip Bucket .... $18,000. • 40' shipping Containers ..... $2,400. ea. • 35' ¾" rigging gear/chain, WLL 61,000 lbs ........................................................$3,200. To see all our surplus inventory, visit SupplyPost.com

WYATT’S USED EQUIPMENT

1978 Cat D9H Dozer, UBlade & Ripper. ...................$75,000 1991 Cat D8N Dozer, T/T Angle Blade & Ripper ..... $97,000 1984 Cat D8L Dozer, T/T Angle Blade & Ripper ......$90,000 1979 Cat D8K Dozer, UBlade & Ripper. ..................$42,500 1978 Cat D8K Dozer, T/T Angle Blade, Winch .........$47,500 1972 Cat D8H Dozer, Angle Blade & Drawbar .........$35,000 2009 Cat D6N LGP, 6-Way Blade & Ripper ...........$135,000 Komatsu D85E-21 Dozer, T/T Angle Blade & Ripper, Rebuilt Engine .....................................................................$60,000 1998 John Deere 850C T/T Angle blade & Winch ...$57,500 2002 Komatsu PC300LC-6 Excavator, 2-Bkts., Thumb, Chuck Blade, 16,500 Hrs.........................................$54,500 2013 Cat 314E LCR, Like New, C/U Bkt., 1,158 Hrs .$125,000 2004 Case 921C Loader ..........................................$18,500 1998 Champion 750 Grader, 11,211 hrs, c/w 2 Sets of Chains and Snow Wing ...........................................$54,500 2000 Champion 740A, 14’ MB, Ripper & Wing .......$55,000 2006 Kalmar DCE140 Forklift ..................................$28,500 1997 Taylor GT210 Forklift, 3,000 hrs on engine ....$15,000 1981 Cat 631D Scraper ...........................................$45,000 2001 Liebherr 932LL, Grapple, Needs Hyd. work ...$24,500 2014 John Deere 848H Grapple Skidder, 7,000 Hrs, Chains & Dual Function Grapple .......................................$160,000 2015 Superior Hayrack, 8 ft 6 bunks.......................$36,500 Cat D9H 4BBl Single shank Ripper ........................... $7,500 Cat D5H Winch c/w Controls & Pump.....................$13,500 Cat D7R Winch........................................................$10,000 Cat D8N Fuel Tank .....................................................$1,800 Weldco Beales Chip Blade, fits Cat D8N, complete.....$12,500 Unused WBM Cat D8T T4 Canopy.............................$6,500 Limmit 2300B Stroke Delimber w/Mount & Comp ... $2,750 Tree Tow Dresser TD20E Grapple ..............................$5,000 Weldco Beales Bush Blade, fits to Dresser TD20 ......$2,500 NEW Accurate Komatsu PC308 Exc. Thumb .............$6,000 WBM Cat 973C Side Dump Bkt, Like New ................$7,500 Cat D11 U/C, 6 Sprocket Segment, Idler & Roller ..$10,500 Full Set of 32’’ Pads For Link Belt 225LX ..................$1,900 NEW Komatsu Idler, fits PC 400-6 or HD300-6 ........$1,950 Parting Out 1975 Cat 14G Grader & Cat D5H TSK......Call

Call 250-706-8594

Page 37

BANNING EQUIPMENT LTD

Next Deadline: Friday, April 17th for the May 2020 issue Got heavy equipment or trucks to sell? Call 1-800-663-4802 to place an ad the Classifieds.

Let’s get it sold!

PRINCE GEORGE

TRUCK & EQUIPMENT

250-561-1234 - www.pgtruck.com

1-800-946-9400 EQUIPMENT

• 2006 JD 2054 Waratah 622B Processor ........... POR. • 1993 Ford 9030 w/Seppi Forest Mulcher ...$49,900. • 3412 Cat GenSet 906KVA, 600/480 Volt .......... POR. • TD20G & TD20E Dressers, w/winch & ripper....POR. • 2000 Timberjack 4x4 20K lb Forklift ...........$16,000. • Onan 18kW GenSet, 1 or 3 ph., w/trailer .....$7,500. • Model 5000-21 Superlift Str. Boom Crane ......$4,950. • 2012 Alkota National Pressure Washer........$4,950.

TRUCKS & TRAILERS • 2007 53EQT Tridem BWS Step Deck ................ POR. • 2007 Red Western Star 4900 .......................... .POR. • 2009 Volvo D13 Autoshift ............................... .POR. • 2015 W/S Tri-Drive Tractor ............................... POR. • 2005 F/L Tri-Drive Winch Tractor ...................... POR. • 1998 Peerless Super B Logging Trailer ................. POR. • 1999 Superior Super B Logging Trailer ................. POR. • 1995 Doepker Tridem Clam Dump ................ $18,500. • Tridem Hayracks ................................................... POR. • Assorted Water Tanks and Trailers Available....... POR. • 2013 Volvo D13 Auto Shift................................ POR. • 2006 IHC 4400 Tandem 26’ Collins Van w/rail gate .POR. • 1990 IHC DT466 Flat Deck ................................ $6,500. • 2009 Durastar S/A w/ Reefer Van .........................POR. • 1999 FL80 Tandem 24' Deck, Moffat Fork Lift ......POR. • 1986 IHC Tandem Water Truck ...................... $17,900. • 1994 W/S Service Truck w/Fassi Crane ........ $26,500. • 1995 Tremcar Potable Water Tanker, Tridem ....................................................................$19,500. • 2014 BWS Ez-2-Load Hiboy 53' Tridem ............ POR. • 2012 IHC Prostar Autoshift Tractor .................. POR. • 1991 GMC Topkick Serv Fuel Truck, crane.$12,900. • 2005 48’ Great Dane Tandem, Dry Van ............ POR. • 2005 Westec Vac Tank ..................................... POR. • 1990 ParPac Tri-Axle ........................................ POR. • 1990 KW T800, Cummins, 5th Wheel .........$10,500. • 1981 Ford, 20’ box, p/tailgate, Allison trans. ... POR. • S/A & Tandem Axle Jeeps................................. POR. • 1998 Kenworth Tandem Dump Truck .............. POR. • 2005 Cancade Tridem End Dump ...............$28,500.

WRECKING • 793 JD Buncher • 2200 Madill • 748G Skidder • G67 Grapple • TD20E • Timberjack 450A & 520 Grapple Skidder • Hitachi EX200-5 • 230 & 404 Timberjack Line Skidder • Clark 668B Line Skidder • Clark 125B Loader • John Deere 693D • Treefarmer C7 & C8 Line Skidders • 82-40 Terex • TS24 • Warner & Swasey Grad-All 300 Hydro Cruiser • Good selection of Detroit Diesel, Allison, Clark, Twin Disc, Cat, Cummins and Perkins engine and trans. parts.

8901 Penn Road, Prince George, BC Phone: 250-564-7226 · Fax: 250-564-7233 Email: scott@banningequipment.com EQUIPMENT FOR SALE

2013 - K008-3 Mini Excavator Kubota ..........................................$20,000 2012 - ZX350LC-5N Excavator Hitachi........................................$135,000 2008 - 320DLLR Excavator Cat .......................................................$70,000 2006 - S205 Skidsteer Bobcat........................................................$25,000 2005 - TK741 Feller Buncher - HF221 22” head...........................$65,000 2001 - 730A Feller Buncher Prentice............................................$85,000 2001 - D7R XR Crawler Cat Double a/tilt, ripper .......................$170,000 1998 - IT28G Wheel Loader Cat.....................................................$41,500 1993 - IT24F Wheel Loader Cat .....................................................$39,500

DOZER ATTACHMENTS

Blade - D8N-R Double angle tilt & C-Frame ...............................$25,000 Blade - D7R Semi-U w/tilt 142” .....................................................$18,000 Brush Rake - D6 - Destec ................................................................$6,500 Counterweight - D6T Drawbar Parts .............................................$2,500 Ripper - D7R - Cat Multi-shank .....................................................$20,000 Ripper - D8N-R-T Ripco Multi-shank- No Controls ...................$25,000 Winch - D5H - Cat ...........................................................................$12,000 Winch - D7H/D7R Hydraulic & Controls ......................................$12,500 Winch - D8N/D8R Hydraulic & Controls ......................................$12,500

WHEEL LOADER ATTACHMENTS

Blade Snow 930K/938K EFI/Hyd/Ang/Fusion, 12 ft .....................$15,000 Blade Snow 930K/938K WBM 12ft.Fusion Hyd/Ang ..................$16,000 Blade Snow - 966C Pin-On Hydraulic Angle 12’ ...........................$7,000 Blade Snow - fits on 980G Log Grapple 14’ ...................................$1,500 Bucket - IT28G/930G - Cat Q/A 100 in.............................................$3,000 Bucket - 938H/938K Cat Fusion Q/A -106” .....................................$7,000 Bucket - 966D/E/F - Cat 126” ...........................................................$6,500 Bucket - 966G - WBM 120” 7-1/2” yard. T/A.................................$8,000 Coupler - 980H - Imac Q/C hydraulic..............................................$5,900 Forks - IT28G - IT Q/A 48” ................................................................$4,500 Forks - IT28G - IT Q/A 72” ................................................................$4,500 Forks - 930K,938K Cat Fusion - Q/C 54”..........................................$5,500 Forks - 938G - WBM Q/A 46” ...........................................................$4,000 Grapple - 930H - IT Q/A EFI Almost New .......................................$4,000 Grapple - 966G Cat Log grapple WBM ..........................................$7,500 Jib - 930G/H, Cat Fusion Lugging ....................................................$4,500 Jib - 938K - Fusion Q/A .....................................................................$4,500 Secondary Steering Kits 950H/962H/966H/972H ..........................$3,500 Tire - IT24F/IT14F - 17.5 x R25 40% Michelin (4) ...........................$2,750

MOTOR GRADER ATTACHMENTS

Blade Snow 140H/140M Hyd. Lift & Angle WBM ......................$15,000 Blade Snow 140H/140M-Hyd. Lift No Angle WBM ....................$13,500 Blade Snow 140M,160M,14M M/Angle,New Cat 11’ ................$11,000 Blade Snow 140M,160M Frt/Nose Mnt No Angle 9’ ....................$6,000 Lift Grp. Front - 140G/H/M - Cat.......................................................$6,000 Lift Grp. Front - 14H/14M - WBM ....................................................$8,500 Snow Wing -140M/160M - WBM ripper mnt.*New* ................$12,500 Snow Wing - 140M - WBM Masted ...............................................$7,500 Snow Wing - 140H/160H - WBM Lo-Pro........................................$4,000 Ripper - 14H - Ripco MS...................................................................$5,250 Wobbly Wheel - Cat 14H/J/D accum s/shift 12 wheel ..............$16,000

SKIDSTEER ATTACHMENTS

Auger 30C SkidSteer High Torque Unit Drive ...............................$2,500 Blade - 246C - AMI 108” snow *New*..........................................$4,610 Blade - S590 skidsteer forklift 6’- 8’ Extendable Plow ................$1,650 Bucket HD LowPro Skidsteer 72” edge..*New* ..........................$2,025 Bucket RD LowPro Skidsteer 78” tooth..*New* ..........................$1,650 Fork - SS - AMI 48” 4200 LB HD Q/A…...*New* ..........................$1,065 Jib - Skidsteer 2000 lb Cat Lugging ................................................$1,850 Cement Mixer Edge Skidsteer Q/A #24962...................................$3,500

BACKHOE & MINI EXCAVATOR INVENTORY

Bucket - 35 Series - Cat 24” EFI Q/A ..............................................$1,850 Bucket - 301 Cat 10 Series - EFI Q/C 12” .......................................$1,650 Bucket - 303 Cat 30 Series - EFI Q/C 18” .......................................$1,650 Bucket - 303.5 - EFI 18” Q/A Cat 2014.............................................$1,650 Bucket - 50 Series - 305 EFI Q/A 24” ..............................................$1,850 Bucket - Bobcat - 20” Digging Q/C....................................................$800 Bucket - 420E,F - 42” Cat Q/C Cleanup ..........................................$1,750 Bucket - 430F - 30” Cat WBM Q/A..................................................$1,800 Bucket - 430F - 42” Cat WBM Q/A..................................................$2,250 Hammer NPK GH-07 Mini Ex Breaker Inc/chisel tool .................$4,850 Thumb - 35 - Hydraulic thumb…*New* ....................................... $1,950

EXCAVATOR ATTACHMENTS

Brush Rake - 250 - 72” WBM Q/A…..*New*................................$7,000 Bucket - 120 - 54” Cat WBM Q/A....................................................$5,000 Bucket - 200 - 36” Craig WBM Q/A (ZX210) ..................................$6,000 Bucket - 200 - 60” WBM Q/A ZX200LC ..........................................$6,250 Bucket - 250 - 36” Cat WBM Q/A....................................................$5,000 Bucket - 250 - 42” Cat WBM Q/A (329E) ........................................$5,000 Bucket - 250 - 60” WBM Q/A...........................................................$5,500 Bucket - 250 - 66” Q/A Finning .......................................................$4,900 Bucket - 250 - 66” EFI WBM Q/A 329E ...........................................$6,000 Bucket - 330 - 48” CWS WBM Q/A.................................................$6,500 Bucket - 330 - 72” Brandt Q/A WBM 350G..................................$7,500 Bucket - 345/450 - 54” WBM Q/A ...................................................$7,500 Bucket - 450 - 84” WBM Q/A ..........................................................$4,800 Chuck Blade - 250 - WBM 84” WBM Q/A .....................................$6,500 Chuck Blade - 300 - IMAC 84” WBM Q/A .....................................$6,500 Chuck Blade - 450 - WBM 120” WBM Q/A ...................................$6,500 Coupler - 250 Cat Hyd Q/A ..............................................................$3,500 Coupler - 250 WBM Q/A ...................................................................$3,500 Coupler - 300 Cat Hyd Q/A ...............................................................$3,500 Ripper - PC78US-6, 307D\308D, ZX75US-3, CWS .........................$1,500 Ripper - 150 - Finning Q/A Lugging .................................................$1,500 Ripper - 250 Banning Mfg. WBM Q/A ............................................$5,000 Thumb - 200 - Gentec MT2650 HD...*New* ..................................$2,750 Thumb - 330 - Cat Hyd ......................................................................$6,500

Page 38

Supply Post · supplypost.com

MONTHLY SPECIAL Rebuilt 2003 Hitachi 370-5 Log Loader ...............................................POR

NEWLY LISTED INVENTORY 1988 988 B Bucket machine......$55,000 1985 Ford L8000 Crane Truck ....$10,500 John Deere 670B Grader .........$24,500

Case IH Announces Enhancements For Lineup Of Precision Air Carts To help producers make every seed count, Case IH is introducing new enhancements for the lineup of Precision Air™ 5 series air carts. Designed to get the most from every plant’s potential through highly accurate seed and fertilizer metering and distribution, Model Year 2021 air carts are designed to maximize

efficiency with new configuration options and features such as individual tank weigh scales and curve compensation. “Growers tell us they want the ability to do more work in less time and seed with the highest level of confidence,” said Trent Nowosad, Case IH marketing manager for seeding equip-

Hardly Used CWS Lugged Brush Rake for 300/350 ...........................$6,000

20-Ton Tippy Trailer ......................... POR

Give me a call and let me know what you’re looking for! WWW.ROYQUIP.COM

250-203-0134 FOR MORE INFO

MOUNTAINSIDE EQUIPMENT Call Kelly at 1-855-950-1905

2003 Madill 2850 Log Loader .................................... $219,000 2011 John Deere 903K Buncher .................................. $65,000 2011 240 Link Belt Log Loader .................................... $95,000 2013 XCMG CV122PD Packer, 2,399 hours ................... $85,900 2015 850K WLT John Deere Dozer, 2,185 hours.......... $285,000 2016 EC380E with Rock Crusher/Ripper, 3,153 hrs .... $638,000 2007 D6R Cat Dozer, new U/C, 11,800 hrs .................. $114,900 2000 Cat D5H, 10,080 hours ........................................ $34,900 2014 Cat 568 Road Builder, 5,300 hours .................... $305,000 2006 G780B Volvo Grader, 13,670 hrs .......................... $76,000 1996 D8R Cat Dozer, 17,228 hrs ................................. $114,900 2011 870 Tigercat Buncher, 16,385 hrs ...................... $165,000 2014 240 Hitachi Log Loader, 9,320 hrs ..................... $225,000 2014 903K2 John Deere Buncher, 10,794 hrs ................... SOLD 1990 667F Clark Skidder, 8,628 hrs .................................. SOLD 2005 870C Tigercat Buncher, 16000 hrs ..................... $129,000 2015 848L John Deere Skidder, 4,574 hrs .................. $253,000 2016 210 Link-Belt / 622B Processor, 6,856 hrs ......... $239,000 2012 1910E John Deere Forwarder, 18,200 hrs .......... $176,900 2008 903J new injectors, fuel pump, front window, stick bushings, batteries, new top sliders, main pump replaced 2 yrs ago ..................................................................................... $65,000 2011 320FM Cat / 622B Processor, 14,836 hrs........... $165,900 2017 LX870D Tigercat Buncher, 5,600 hrs.................. $515,000 2016 855C / 600 Southstar Processor, 7,900 hrs ....... $464,900 2015 210 Hitachi / 500 Southstar Proc., 6,800 hrs..... $289,000 1996 Cat D5H TSK Skid Cat. 5,459 hours showing ...... $69,900 2012 Cat 325D Cat Log Loader, 13735 hours............. $189,900 2012 2154 John Deere Log Loader, 13785 hours ...... $149,900

ment. “Case IH Precision Air carts are designed with industry-leading technology, and these new features have been implemented to help operators achieve next-level accuracy.” Case IH is enhancing the lineup of Precision Air™ 5 series air carts with new features and configurations, including individual tank weigh scales and curve compensation. Individual tank weigh scales Model Year 2021 air carts are equipped with individual tank weigh scales, designed to minimize

guesswork and inform the operator how much seed or fertilizer is in each tank — without having to leave the tractor cab. With the ability to check individual tank weight in the cab on an Advanced Farming Systems (AFS) Pro 700 display or on a cart-side display, the feature indicates how many acres the operator will cover until the product tank is empty, which helps with tendering logistics. The feature is available across the entire lineup of Precision Air carts, with capacities from 350 to 950 Continued on page 39

MOVING ON SALE MAKE ME AN OFFER

Caterpillar D8H Dozer .....................POR Cypress 7280 Grapple Yarder, Rebuild ............................................................POR

April 2020

Wayne Giles: 250-691-1650

Ashley Roney: 250-845-9169

SKIDDERS: 2001 JOHN DEERE 748G III, Good Condition, 95% Tires And Chains, New Turbo, All Resealed Cylinders, Heat, A/C, Well Maintained, Ready To Work. 20674 hours ...................................................................................................................$48,000 2010 TIGERCAT 630D, Very Good Condition, 80% 35.5 Tires and Chains, Newer Engine (2800 Hrs), Newer Front And Rear Diffs ( Under 1000 Hrs), New Planateries, Heat, A/C, Stereo, Tight, Well Maintained, Ready To Work. 13151 hours .................................................................................................................$125,000

GRADERS: 2006 DEERE 772D, Good Condition, 60% Snow Tires and Chains, 6X6, Newer Engine, 14’ Moldboard, Hydraulic Snow Wing, Ripper, Heat, A/C, Stereo, Espar Coolant Heater,Work Orders Available, Tight, Very Well Maintained, Ready To Work. 18225 hours ......................................... $68,000

EXCAVATORS: 2006 JOHN DEERE 270D LC, Good Condition, 65% U/C, Newer Engine, Newer Pumps, C/W Dig Bucket, Hydraulic Thumb, Q/A, Danfoss Valve, Cab Guard, Catwalks, Rock Guards, Heat, A/C, Very Well Maintained, Work Orders Avalable, Ready To Work...................................................................................................$60,000

DOZERS

2003 JOHN DEERE 2554 EXCAVATOR (Logger) Weldco Beales power grapple / bucket and thumb, motor and pumps have been done ............................................$25,000 1999 HITACHI 330LL-5 LOG LOADER, heel and grapple / new running gear, Izuzu motor and pumps have been done ............................................................................ $50,000 1993 DRESSER TD 15E DOZER, runs great ................... $POR 1991 CATERPILLAR FB 300P BUNCHER / back spar, everything works ......................................................$10,000 1976 MADIL 071 YARDER plus rigging, blocks, straps, and parts recent 1” sky line, put it to work or use for parts only asking .............................................................$45,000

CALL DOUG (250) 265-1643 1987 Volvo A25 Rock Truck, 22,000 Hrs.......$23,000. 1989 Volvo A25 For Parts – No Motor Or Trans. ........ ...........................................................................$9,000. 1995 Volvo A25C Runs, But Needs Tranny Pump. 23,485 Hrs. .......................................................$18,000.

2007 CATERPILLAR D6R XW, Very Good Condition, 90% U/C, Sweeps, Screens, Rock Guards, New Left Final, C/W DAT Blade, Multi Shank Ripper, Heat, A/C, Well Maintained, Ready To Work. 11,900 hours.........................................$125,000

2013 JD 410K 4x4 Backhoe Extendahoe, Pattern Changer, 3,484 Hrs .........................................$74,750.

1998 DEERE 750C LGP II, Exc. Cond., 80% U/C, New Engine, Newer Hyd. Pump, New Final Drive, Sweeps, Screens, 6 Way Blade, Winch, Heat, A/C, Well Maintained, Service History Avail. 14,675 hours .........................................$68,000

2008 KW TriDrive Cab & Chassis, 24” Sleeper, 310,000 kms Fresh MVI .................................. $44,000.

PROCESSORS: 2002 JOHN DEERE 2054, Good Condition, 50% U/C, High & Wide, LED Lights, Newer Engine, Hydraulic Pump, Rotec Bearing, Main Boom Pin, Rotary Manifold, Waratah 620 Warrior ,Color Monitor, Danfoss Handles, Heat, A/C, Radio, Tight, Well Maintained. Service History Avail.. 29,400 hours ........$47,000

FELLER BUNCHERS:

2007 Komatsu Dozer D61PX-15E0 6-Way Blade Forestry Guarding, Winch, New U/C 7,060 Hrs ..........................................................................$84,000. 2001 F550 Mechanic’s Service Welding Truck, 4x4, 18 hp Compressor, Welder, Cabinets, Tools, 7.3 Turbo Diesel, 418,000 kms..............................$11,900.

2009 TIGERCAT 870C, Good Condition, 40% U/C, Newer Engine, Newer Travel Motors, New Injection Pump, Tigercat 5702 340 Degree Head, Heat, A/C, Stereo, Very Well Maintained, Ready To Work. Hours: 15525 ...............................$125,000

2-52’ bridges 9.5’ wide $12,000 ea. Or join side by side – 19’ wide 130,000 lb capacity.

2004 TIGERCAT L830, Good Condition, 65% U/C, Tilter, Zero Tail Swing, Newer Cummins Engine, Rebuilt Rotary Manifold, Heat, A/C, Tight, Well Maintained, Ready To Work, 18855 hours ....................................... $130,000

These 4 Vibrating Compactors All Have 84” Smooth Drums & Rear Tires

2008 DEERE 903J, Good Condition, 50% U/C, Resealed Control Valve, New Batteries, FR 22” 360 Head, Heat, A/C, Radio, Well Maintained, Tight, Ready To Work. 15,000 hours .............................................................. $70,000

2014 Case SV212 Cab, Heat, A/C 1,723 Hrs .$85,000.

WHEEL LOADER: 2011 DEERE 544K, Very Good Condition, 50% Tires, Fully Loaded, C/W BOE Bucket, Pallet Forks, Auxiliary Steering, Hyd. Q/A, Heat, A/C, Stereo, Tight, Well Maint., Fresh Service, Ready To Work. 12072 hours .............. $95,000

1-888-905-7821

Complete inventory and photos at: www.majorequipsales.com Like us on Facebook

2003 Dynapac CA 262D Cab, Heat, Rebuilt Fuel Pump 6,635 Hrs. ............................................. $37,000. 1999 Bomag BW 212 D-3, Open Cab, 7,317 Hrs ..........................................................................$23,000. Bomag BW 217 D, Cab, Weighs 40,000 lbs ...$11,000.

MILK RANCH LTD

250-457-0099 C A C H E

C R E E K

B C

Supply Post · Our Readers Are Your Buyers

CASE IH

April 2020

Continued from page 38

bushels. “The new weigh scale features save operators valuable time and help ensure accurate application,” Nowosad said. “The ability to instantaneously see this information from the cab offers peace of mind.” Curve compensation The new curve compensation option available in the lineup is designed to help ensure proper plant population across the drill in tight turns and corners. With this option, the exclusive AFS AccuSection™ modular metering system controls each individual meter independently, al-

Precision Air™ 5 series air carts is designed to help ensure proper plant population across the drill in tight turns and corners. New models and configurations The lineup of Precision Air carts will now include two new three-tank air cart configurations, ideal for fertilizer application or broad-acre seeding: Precision Air 3725 and Precision Air 3915. Both tow-behind models, these configurations deliver the largest three-tank configurations in the lineup and provide the ability to stay in the fields longer and get more work done in a day between tendering. All air carts can now be ordered without an onboard fill system, such as an auger or conveyor, to further provide growers the freedom to tailor each Precision Air 5 series air cart to accommodate the demands of their operation. This new option reduces the cost for producers who typically would use an offboard solution such as a field loader conveyor or a tender truck. b

lowing each section to apply the correct amount of product as sections speed up or slow down through a turn. These features all lead to a high level of accuracy and uniformity across the air drill or fertilizer application equipment. “This technology can play a major role in providing better, more uniform plant stands in every part of the field,” Nowosad said. “At the end of the day, not only is this feature helpful in maximizing efficiency but it also has the potential to help reduce weed pressure and boost yield.” The new curve compensation option available on Source: Case IH

Page 39

Your Aggregate Specialists

EMPLOYEE ANNOUNCEMENTS We are pleased to announce 2 new key employees. Both men are experienced in their ﬁelds and in the aggregate industry. Give them a call for all your aggregate needs.

DAWSON SLOAN

We welcome Dawson Sloan as a new Sales Representative for our Aggregate Sales and Rentals Division. dawson@lonetrack.ca

Please call Dawson at (604) 657-0065.

CHUCK HENDERSON We also welcome Chuck Henderson as our Sales Representative for Parts and Service. chuck@lonetrack.ca

Please call Chuck at (604) 657-0177.

Hugh Porter: 604. 657.7167 Lonetrack.com | hugh@lonetrack.ca

SPECIALS & PROMOTIONS CHIEFTAIN SPECIAL PROMOTION Crusher Parts (In Stock)

JCI SPECIAL PROMOTION Cone crusher bearing offer. A limited supply is available on a first-come, first-served basis. You get an additional 10% discount on the following bearing part numbers:

CONE LINERS • JCI K200, K300, K400, K400+ • Eljay RC45, RC45II, RC54, RC54II • Cedar Rapids MVP280, MVP380, MVP450 • Metso HP300, HP400, 1560 Omni • Sandvik H3800, H4800, H6800 S3800 , S4800 • Clemro XC1400, XC1500

• 456128 • 456156 • 456463 THESE BEARINGS ARE USED ON THE FOLLOWING CRUSHER MODELS:

• JCI 1200LS • JCI K300+• JCI K200+• JCI Kodiak 300 • El Jay RC45 and RC45II • Cedarapids MVP280

JAW PLATES • KPI 2650, 3055, 2854 • Cedar Rapids 2236, 2436, 3042 • Sandvik C12, C12+ IMPACT BLOW BARS (High, Medium, Low Chrome With Ceramics) • Cedar Rapids 5064 • KPI 4240, 4250 • Kleeman • Lippmann • Eagle 1400 WEAR PARTS • Jaws • Cones • Wedges •Blow Bars • Toggle Plates • Torch Rings • Impact wear liners • Cheek plates for crushers • Side wear liners • Wear liners • Crusher wear liners • Apron wear liners

For more details and exclusive pricing Call Darcy 587-873-9554 100-54408 Range Road 260 Sturgeon County, AB, T8T OW2

1-800-601-6787 780-460-2220 www.chieftainequipment.com

parts@chieftainequipment.com sales@chieftainequipment.com

Page 40

Supply Post · supplypost.com

April 2020

SALES & RENTALS • SCREENERS • CONVEYORS • CRUSHERS • AGGREGATE EQUIPMENT

GREAT NEW & USED INVENTORY! 1-800-960-9939 | 403-946-4860 | Fax: 403-946-5191

WESTERN CANADA’S PREMIER McCLOSKEY DEALER HIGH QUALITY CANADIAN MADE EQUIPMENT THAT’S BUILT TO LAST! CHECK OUT THESE NEW MACHINES THAT DEBUTED AT CON-EXPO!

McCLOSKEY I44RV3HDR IMPACT CRUSHER W/ 6’X14’ AFTER SCREEN

NEW McCLOSKEY J45 JAW CRUSHER

McCLOSKEY WASHING SYSTEM COMPACT SAND PLANT CSP 200

NEW McCLOSKEY S250 6X22 SCREENER

2020 McCLOSKEY R155 SCREENER. NO MORE RAMPS REQUIRED!

McCLOSKEY C2 & C3 CONE CRUSHERS FEATURING A METSO CONE

QUALITY USED EQUIPMENT McCLOSKEY ST80TV STACKER

2016 RSS RT508 REVOLVER & CHR4030 40’ CONVEYOR $78,000

CALL TYALTA FOR SPECIAL PRICING!

In House Financing now available! Flexible terms and conditions. Call Tyalta Finance today at 1-877-550-0016, finance@tyalta.com

www.tyalta.com | info@tyalta.com

.com FAMILY OWNED, SINCE 1971

SECTION 3

.com APRIL 2020 · PAGE 41

SIX LOCATIONS TO SERVE YOU! Victoria: 888-652-9139 Duncan: 866-746-1515 Langford: 250-915-0350 Nanaimo: 250-756-0026 Burnside (Parts): 250-384-0451 Campbell River: 250-286-1151 Ed Murray: 250-812-2925 Garry Shelton: 250-715-5088 Emily Polack: 250-480-8281

2019 FREIGHTLINER M2-106 4X4 SERVICE TRUCK, Cummins L9 350 Hp with Allison Automatic. 14,000FA 23,000RA. Rigged with Custom Brutus Truck Bodies Service Body. 12,000lb Cobra Crane installed & Compressor.

2020 WESTERN STAR MIXERS – 4800 with factory tandem steer, Detroit DD13 with Eaton 18 speed manual and Ultra Shift automated transmissions available. Rigged with McNeilus 14 yr drum. CALL TODAY FOR PRICING!

Ted Peterson: 604-240-6181 Rob Nessel: 250-710-3626 Craig Willett: 250-287-6169

2020 WESTERN STAR 4700, DD13 – 470HP, RTLO16918B, 20,000# front axle, 46,000# rear axles, c/w Can American Soil King Extreme Slinger loaded truck, includes auto greasing system 2 IN STOCK

SELECTION OF 2020 WESTERN STAR DUMP TRUCKS, Cummins X15 and Detroit DD16 power available, Eaton Ultrashift & 18 speed manual transmissions in stock. 20,000FA and 46,000RA. Nahanni Boxes and Summit Brandon boxes available. IN STOCK AND READY FOR WORK – CALL TODAY FOR PRICING.

2020 Western Star 5700, DD16 – 600HP, 18 speed transmission, 13,300# front axle, 46,000# rear axles, loaded truck, great super B spec. PRICED RIGHT – CALL FOR DETAILS!

2020 FREIGHTLINER M2-106, Cummins B6.7 300 hp With Allison 2500 RDS, 12,000FA 21,000RA Hydraulic Brakes. Rigged With Fort Fabrication Ampliroll Hook Lift. IN STOCK AND READY FOR WORK!

2020 M2-106, Cummins 300HP, Allison Automatic, 12,000# Front, 21,000# rears, Hydraulic Brake Truck, c/w Collins 26’ Van Body with 4400# tuck away power tailgate READY FOR WORK!

2020 FREIGHTLINER CA116 Daycabs, Dd13 – 505hp, Dt12 Transmission, 12,000# Front, 40,000# Rear Axles, Steel And Aluminum Wheels. 2 TRUCKS IN STOCK.

SPRING CLEARANCE ON ALL PRE-OWNED INVENTORY

$179,900 2016 WESTERN STAR SELF-LOADER, 4900 WS, Detroit DD16 600HP, Eaton 18 spd, 20,000FA, 69,000RA, rigged w/2004 Serco 160 log loader and sliding log bunk, 185,700 kms. PASSED INSPECTION & READY FOR WORK.

$79,900 2015 FREIGHTLINER 132 CORANADO HIGHWAY TRACTOR, 70" Mid-Roof Sleeper, Detroit Dd16 600 Hp With Eaton 18 Speed Manual Transmission. 40,000 Rears With 13,300 Fronts. 625,000 Km. NICE CLEAN TRUCK READY TO GO TO WORK!

$39,900

2004 FREIGHTLINER M2-106 EXTENDED CAB RIGGED WITH REEFER, 250hp Cat Engine With Allison Automatic Transmission. 12,000 Front Axle And 21,000 Rear Axle, 266,000km, Rigged With Minoru Insulated 18' Reefer Van And Thermo King Diesel Reefer. READY FOR WORK!

www.prtruckcentre.com

TRAILERS

Page 42

Supply Post · supplypost.com

April 2020

Volvo Trucks is introducing four new trucks, with a strong focus on the driver environment, safety and productivity. “We are really proud of this big forward-looking investment. Our aim is to be our customers’ best business partner by making them even more competitive and help them attract the best drivers in an increasingly tough market,” says Roger Alm, President Volvo Trucks. The four heavy-duty trucks; Volvo FH, FH16, FM and FMX, represent about two thirds of Volvo Trucks’ deliveries. An expected growing demand for transport is putting pressure on the availability of skilled drivers worldwide. In Europe, for example, estimates show that around 20 percent of all driver jobs are vacant. To help customers recruit and retain the best drivers, Volvo Trucks has

focused strongly on developing the new trucks to make them safer, more efficient and more attractive working tools for qualified drivers. “Drivers who handle their truck safely and efficiently are an invaluable asset to any transport company. Responsible driving behaviour can help reduce CO2 emissions and fuel costs, as well as helping reduce the risk of accidents, injury and unplanned downtime. Our new trucks will help drivers work even more safely and productively and give our customers stronger arguments when competing to attract the best drivers,” continues Roger Alm. The various truck models in Volvo Trucks’ range are available with many different cab models and can be optimized for a wide range of applications. In long-haul trucks, the cab

VOLVO TRUCKS

Volvo Introduces New Trucks

is often the driver’s second home. In regional transport trucks it often serves as a mobile office, while in construction the trucks are robust, practical work tools. Therefore, visibility, comfort, ergonomics, noise level, maneuverability and safety were key focal points when developing all the new truck models. The truck exterior has also been

upgraded to reflect the new trucks’ properties and create an attractive overall design. New cab, offering more space and improved visibility – Volvo FM and Volvo FMX The new Volvo FM and Volvo FMX have a brandnew cab, as well as many of the same instrument display functions as their

larger Volvo counterparts. Their interior volume has been increased by up to one cubic meter, providing better comfort and more working room. The visibility is now even better due to larger windows, a lowered door line and new mirrors. The steering wheel is equipped with a neck tilt function allowing the driving position to be in-

dividually adjusted to a greater extent. The lower bed in the sleeper cab is positioned higher up than previously, affording higher comfort and creating additional storage space underneath. The day cab has a new 40-liter storage compartment with interior lighting on the back wall. Cab comfort is further enContinued on page 43

Details: Ford 4x4 Supercab with 11’ mechanics body, and 5,000 lb telescopic crane, with proportional remote control and 360 ° rotation. Multi-function air compressor, welder, generator and battery booster with a large lockable cargo bay, means you’re ready for anything with this service truck.

ID#14208

FORD 550 MECHANIC / SERVICE TRUCK MEMBER OF:

1806 2 Street, Nisku, AB, Canada T9E 0W8 brandt.ca/trucks 1-844-605-2523

RENTAL PURCHASE OPTIONS, FINANCING, AND TRADES AVAILABLE

April 2020 Continued from page 42

hanced through reinforced insulation that helps shut out cold, heat and noise disturbance, while a sensor-controlled climate unit with a carbon filter promotes good air quality in all conditions. All models equipped with a new driver interface The driver’s area now has a completely new interface for information and communication, aimed at making it easier to overview and manage different functions, creating less stress and distraction. The instrument display is fully digital, with a 12-inch screen that makes it easy for the driver to choose the information needed at any time. Within easy reach of the driver there is a supplementary 9-inch side display available for infotainment, navigation, transport information and camera monitoring. The functions can be controlled via buttons on the steering wheel, by voice control, or via the touchscreen and display control panel. Enhanced safety systems to help avoid accidents Safety has been further improved with functions such as adaptive high beam headlights in the Volvo FH and Volvo FH16. The system improves safety for all road users by automatically disabling selected segments of the LED high beam when the truck approaches oncoming traffic or another vehicle from behind. Driving is also facilitated by an improved Adaptive Cruise Control (ACC) for speeds down to 0 km/h and downhill cruise control that automatically activates the wheel brakes when extra brake force is needed to maintain constant downhill speed. The Electronically controlled Brake System (EBS), which is a prerequisite for safety features such as Collision Warning with Emergency Brake and Electronic Stability Control, now comes as standard on the new truck. Volvo Dynamic Steering, with the safety systems Lane Keeping Assist and Stability Assist, is also available as an option. A road sign recognition system detects road traffic signs, such as overtaking restrictions, road type and speed limits, and displays them in the instrument display. The visibility can be improved further by adding a

Supply Post · Our Readers Are Your Buyers passenger corner camera which provides a complementary view of the side of the truck on the side display. Efficient engines and alternative drivelines Both the environment and economics are important factors for haulage companies. As there will not be one singular energy source that addresses all climate change issues, and since different transport segments and assignments will require a variety of solutions, several types of drivelines will continue to exist in parallel for the foreseeable future. In many markets, the Volvo FH and Volvo FM are available with the Euro 6 compliant gas-powered LNG engine that offers fuel efficiency and performance on par with that of Volvo’s equivalent diesel trucks, but with a far lower climate impact. The gas engine can run on either biogas, which cuts CO2 by up to 100 percent, or natural gas which reduces CO2 emissions by up to 20 percent when compared with Volvo’s equivalent diesel trucks. This relates to emissions from the vehicle during usage, known as tank to wheel. The new Volvo FH can also be tailored with a new efficient Euro 6 diesel engine, which is included in the I-Save package that enables significant fuel and CO2 savings. In long-haul operations for instance, the new Volvo FH with I-Save combines the new D13TC engine with a package of features and can deliver fuel savings up to 7%*. There have also been improvements for the Euro 3 and 5 versions with features like Volvo Torque Assist. The new generation of Volvo Trucks will be available on the Portuguese market after this summer. *The fuel improvement claim is calculated by comparing costs of diesel and AdBlue for D13TC Euro 6 step D with the Long-Haul Fuel Package (I-Save) to D13 eSCR Euro 6 step D without the Long Haul Fuel Package. Actual fuel economy may vary depending on many factors such as the driver’s experience, use of cruise control, vehicle specification, vehicle load, actual topography, vehicle maintenance, and weather conditions. b Source: Volvo Trucks

Page 43

WIT Names Finalists For 2020 Distinguished Woman In Logistics Award The Women In Trucking (WIT) Association announced the finalists for its sixth annual Distinguished Woman in Logistics Award (DWLA). Sponsored by the Transportation Intermediaries Association (TIA) and Truckstop.com, the award promotes the achievements of women employed in the North American transportation industry. Finalists for the 2020 DWLA award have demonstrated superior leadership within their company as well as with other professional, educational or philanthropic organizations. This year’s finalists are: Monique DeVoe, director of education and development at RFX Inc.; Sue Spero, president of Carrier Services of Tennessee Inc.; and Tamara Stryker, director of sales and marketing at CFI Logistics. Monique DeVoe is the director of education and development at RFX, a third-party logistics company based in Quincy, Mass. She began working at RFX in 2010 and has held positions ranging from receptionist to risk management. She now oversees recruiting, training, human resources and

employee development. DeVoe is a TIA-Certified Transportation Broker and was part of the inaugural class of the TIA MBA in Supply Chain Logistics at William Loveland College from 2014 – 2016. She is honored to be able to help guide others into and within the industry. With a philanthropic heart, DeVoe also sets aside time and funds every September and December to help women who have struggled with homelessness to provide school supplies and holiday gifts for their children. She is also an excellent role model for women in the industry, by maintaining a balance between her work at RFX and her family life, with her husband and twoyear-old daughter. Sue Spero is the president of Carrier Services of Tennessee, a third-party logistics firm, has more than 46 years of experience in the full truckload sector of the transportation industry. Under her direction, Carrier Services has been distinguished as one of the top 25 WomenOwned Businesses by the Nashville Business Journal every year since 2006.

CFI Logistics’ sales strategy and trains sales staff to exceed their goals while simultaneously being responsible for over $20 million in revenue during 2019. Her commitment to her team and servant leadership has allowed Stryker to build a team of logistics professionals who can attain success much like her own. Finalists for the Distinguished Woman in Logistics Award were selected from a group of high-performing women representing third-party logistics, supply chain management and related functional disciplines. Members of the judging panel include: Brent Hutto, chief relationship officer, Truckstop. com; Dr. Stephanie S. Ivey, associate dean for research and professor, Herff College of Engineering; Ellen Voie, president and CEO, WIT; and a TIA representative. The award highlights the crucial roles of leading women in the dynamic and influential field of commercial transportation and logistics, which encompasses logistics service providers as well as motor carriers. The winner of the 2020 award will be announced on stage during the opening session of the TIA Capital Ideas Conference & Exhibition in Austin, Texas on Friday, April 3, 2020. b

A Certified Transportation Broker through TIA, Spero is involved with the Women’s Business Enterprise National Council (WBENC), Delta Nu Alpha Transportation Fraternity (DNA), Volunteer Chapter 135, Disadvantaged Business Enterprise (DBE) with the Tennessee DOT, and has been an adjunct professor of International Business at Belmont University in Nashville, Tenn. She serves on the TIA Board of Directors as Political Actions Committee (PAC) chair as well as vice chair of the TIA Foundation Board promoting education in the third-party logistics arena. Tamara Stryker is the director of sales and marketing at CFI Logistics. A 28-year veteran in the logistics and transportation space, she is a trailblazer who has shaped the future of the industry and the professionals she mentors. She is an award-winning sales professional, entrepreneur and educator within her industry and highly regarded by the customers she supports. Upon joining CFI Logistics, Stryker established the Dallas, Texas branch Source: Women In office. Today, she develops Trucking

OFFERING A FULL LINE OF TRAILERS TO SUIT YOUR NEEDS! IN STOCK

Let K-Line quote your next trailer! Call us Toll Free: 1-888-880-5544 #klinetrailers

www.klinetrailers.com

Page 44

Supply Post · supplypost.com

April 2020

Four Terex Trucks TA400 articulated haulers have clocked up around 48,000 hours in a remote coal mine in Siberia, Russia, where they are braving extreme conditions and sub-zero temperatures. Situated in eastern Siberia, the Arpatsky coal mine is a tough workplace for operators and machines. The long winter – when temperatures can get as low as minus 45˚Celsius – puts mining equipment to the test. For the last eight years, four Terex Trucks TA400 articulated haulers have been working at the coal mine, delivering reliable workshifts despite the adverse conditions. The dump trucks – offering a maximum payload of 38 tonnes (41.9 tons) – are transporting coal and overburden, working up to 22 hours a day. During winter, the ground is covered with snow for many months, meaning the haul-

ers have to operate on slippery surfaces and navigate steep, icy slopes. “The robustness of the TA400 and its ability to deliver a reliable performance in tough conditions was a big part of the reason why we chose Terex Trucks haulers over other brands,” says Dmitry Dulin, Chief Engineer at the Arpatsky coal mine. “Since 2012, our haulers have already clocked up around 48,000 hours and they’re still going strong.” The TA400 is the master of steep hills The truck operators appreciate the TA400’s ability to climb and descend the slopes at the coal mine. “The hauler handles the downhill slopes smoothly and safely,” says Oleg Likhodumov, Director of Mining Operations at the Arpatsky coal mine. “With the exhaust break, we don’t even need to use the brakes when going down steep hills.”

The TA400’s modulating transmission retarder is coupled with an efficient exhaust brake and fully enclosed oil-cooled multidisc brakes, this provides optimum control and increased safety on steep slopes. “In mines, you need powerful, robust machines that can perform in extreme environments,” says John Rotherford, Global Key Accounts Director at Terex Trucks. “The drivetrain of the TA400 is perfectly matched to the engine and designed to maintain traction and speed on the toughest jobsites for outstanding productivity at all times.” “The TA400 offers the complete package,” says Dmitry Glazunov, Deputy Director at the Arpatsky coal mine. “It’s simple to operate, reliable and delivers low total cost of ownership. Another benefit is that the machines are

TEREX

Terex Trucks’ TA400s Brave -45˚C In Russian Mine

our trucks,” says Dimitry. “There’s a workshop with spare parts at the coal mine, so we can get roundthe-clock servicing.” The TA400 – Terex Trucks’ workhorse The TA400, the largest articulated hauler on offer from Terex Trucks, has a heaped capacity of 23.3 m3 (30.3 yd3). Powered by a high performance, fuel efficient engine that develops a gross power of 331 kW (444 hp), the TA400 is designed to meet the

demands of the most extreme operations such as quarries, mines and largescale construction projects. The planetary gear transmission provides smooth, efficient gear shifting for optimized fuel consumption and reduced cost of operation. Ground level test points and a fully tilting cab, combined with an electronically raised hood, ensure ease of service and maximum uptime. b

CTA Joins National Task Force Reviewing Commercial Insurance

sector specific issues, insurance personnel training, and length of claim process,” said CTA’s Senior VP Policy Geoff Wood. “Members will have an opportunity to be engaged in this process through CTA staff, or in some cases more directly by attending regional meetings of the Task Force. Either way we encourage the membership to get involved.” b

easy to service – the axle, gears and engine are all easy to access, so service and maintenance work is straightforward, without needing special diagnostic equipment.” Terex Trucks offers dedicated on-site maintenance and support services, which is especially important in Russia as the country is so vast – often dealers’ branches are based hundreds of miles away. “Our dealer Mining Eurasia handles all the maintenance of

Commercial insurance is a popular topic among those in the trucking industry and other commercial sectors in the economy. In response to the increasing attention pertaining to commercial insurance, the Insurance Bureau of Canada (IBC) has formed the National Commercial Insurance Task Force, with the Canadian Trucking Alliance (CTA) being a key member. The Task Force will begin meetings this month in Alberta and travelling across the rest of the country in the Winter-Spring of 2020. The IBC Task Force has a mandate to: Educate and inform consumers, governments and stakeholders on the factors contributing to the current availability and affordability challenges with commercial insurance; Learn from different industry partners, consumers and stakeholders about their experiences related to

Source: Terex

challenges around insurance availability and affordability; Develop a report with recommendations that aim to improve insurance availability and affordability for industry partners, consumers and stakeholders. Source: CTA “The Canadian Trucking Alliance (CTA) thanks and applauds IBC for taking leadership on this issue and establishing this process,” said CTA President Stephen Laskowski. “This is an opportunity to explore with the insurance industry what changes the membership would like to see in the area of commercial insurance.” In preparation for this process, CTA has begun surveying its membership on potential areas for improvement they would like to see in commercial insurance. “Early responses highlighted by members include issues related to insurance fraud, trucking

Your Truck & Trailer Connection, Since 1971

April 2020

Supply Post · Our Readers Are Your Buyers

Page 45

1-855-998-0716 SALES • RENTALS • PARTS • SERVICE & REPAIRS • FINANCE & LEASING

2020 Stoughton 53’ Insulated Tridem Heater Van, HK-450 MAX Thermo King Installed, Slider Suspension, Laminated Oak Flooring, 18 Gauge Sidewall Scuff, Flush Rear Sill, Stk# 12707

$70,995

2020 Doepker Legacy Tridem Grain, 2,100 Cu. Ft. Capacity, TARE: 5,892Kg (12,989Lbs), Auto Lift Axle Management System & Wireless Electric Tarps! Stk #12405.................................................$85,995

2020 Stoughton Insulated Dry Van, Provisions for Reefer or Heater! Holland Slider Susp., Laminated Oak Floor, 18 Gauge Sidewall Scuff, Swing Doors, 1 Rod Lock Each. Stk #12717 .................................... $57,995

2020 Doepker Tridem Steel w/ Ramps, 5’ Beavertail w/ Spring Assist Flip Ramps, Load Cap. of 75,000lbs, Intraxx Susp., Premium Toolboxes, 255 70R22.5 BF Goodrich ST230 Load Range 8, Stk #12622 ...$61,995

2020 Doepker Super B Flat Deck, 60’ Length, 5 Axles, Aluminum Wheels, 11R22.5 Tires, Intraxx A/R Susp., GVWR: Lead 77,200lbs, Rear 77,200lbs, Stk# 12998................................................ $94,995

2019 Doepker Tridem Grain, 2,138 Cu. Ft. Capacity, TARE: 5,850Kg (12,900Lb), Auto Lift Axle Management System & 11R24.5, BF Goodrich ST230 Load Range H, Stk #12432....................................................$71,995

2020 Lazer Inox Stainless Steel Tridem TC407, 44,000L Capacity, 2 Compartments, Heated Belly, Mounted Cabinet Comes Fully Rigged w/ T&E Pump, Titan Gauges & Load Hose, Stk# 10728 ........ $224,995

RENT FROM US!

Our rental fleet has over two hundred units in service. We offer daily, weekly, and monthly rental purchase options available.

2020 Doepker Super B Grain, 2,990 Cu Ft. Capacity! TARE: 9480Kg (20,900 Lbs) GVWR: 70,000Kg (154,000Lbs). Tiremaax PRO Inflation System! Stk #12927.............................................. $123,995

2019 Doepker 4 Axle Logger, TARE Weight: 21,365 Lbs., 6 bunks, 12 Stakes, Painted w/PPG Dragon Hide HD Corrosion, Abrasion & Chip Resisitant Paint! Stk# 12784.............................................. $117,995

2019 Wolf Super B Aluminum TC407, 61,000L Cap., Dbl. Conical Design, 2-Comp. Lead; 1-Comp. Pup, Intraxx Susp., T&E Pump, Titan Gauges, Heat Tracing, Interior Coatings & More! Stk #12765 ........... $359,995

FOR FULL INVENTORY VISIT

WWW.EDMONTONTRAILER.COM

Page 46

Supply Post · supplypost.com

April 2020

SEARCHING FOR PARTS?

The Completely Searchable Supply Post Parts Database Is Here!

WWW.SUPPLYPOST.COM/parts Truck Parts, Equipment Parts, And More Search By Part # Search By Keyword Locate That Part You Need Before You Pick Up The Phone!

April 2020

Supply Post · Our Readers Are Your Buyers

Message From Navistar CEO Troy Clarke Regarding COVID-19 Over the past several weeks, Navistar has been closely monitoring the coronavirus (COVID-19) outbreak and its impact to our business. We want you to know that we are taking action to protect our most important assets – our employees, business partners and customers – while maintaining our highest quality and service standards. This is our top priority at every Navistar location worldwide. In alignment with guidance from the U.S. Centers for Disease Control (CDC) and World Health Organization (WHO) regarding threat assessment protocols, we have activated a cross-functional response team to ensure our business continuity and preparedness plans are updated based on the latest developments of this rapidly changing situation. Below, I have outlined some key actions we are taking to ensure the safety of our people and business operations. Employees and business partners visiting Navistar sites Additional cleaning measures and procedures are being taken to ensure the thorough cleanliness of

our offices and plants. To further protect the health of employees and visitors in our facilities, we have posted best practices for preventing the spread of illness and have additional personal hygiene and cleaning products available. Consistent with the U.S. Department of State travel advisories, we have implemented a ban on business travel to restricted areas. We do not expect our vendors or suppliers to travel to or visit Navistar offices during this time. We have encouraged teleconferences, video meetings and the use of other remote meeting technology when possible. Supply chain impacts We have engaged a third-party vendor to thoroughly evaluate our supply base and determine the potential business impacts of COVID-19. At this time, we have determined it is a low severity issue. The minor issues seen to date have been mitigated through air freight, substitutions of parts and monitoring of suppliers. We have prepared a triage team to rapidly react to any future supply risks, and mitigation plans have Source: Navistar

PacLease Adds New Locations; Achieves Record Level Fleet Size PacLease continued its vehicle growth trend by increasing its new fullservice rental and leasing business by 18 percent in 2019. According to Ken Roemer, PACCAR Leasing’s President, the company also added seven new locations to further the PacLease footprint. “We’re entering our 40th year of business as the full-service leasing arm of PACCAR – offering Kenworth and Peterbilt medium and heavy duty models,” said Roemer. “We’re at an all-time high in the number of vehicles in our PacLease fleet, and we now have more than 450 service locations throughout the United States and Canada. Over

been developed for high risk components. Trade show and event participation Given the nature of the rapidly changing situation, out of an abundance of caution for the safety of all attendees and the need to avoid the potential spread of the virus, we are modifying or withdrawing our participation at upcoming trade shows and events. The decision regarding our level of involvement in these affairs will be made on a case-by-case basis. We will seek to replace physical presence with digital or virtual presence whenever possible. We remain proud supporters of the trade shows and industry events and look forward to resuming scheduled participation as soon as we are able. As a reminder, we encourage you to not only be aware of the best practices to prevent the spread of illness, but also sharing these preventative actions with your family members and community. We will continue to monitor the COVID-19 outbreak, coordinate with local officials and provide updates as the situation warrants. Thank you for your continued support during this time. Sincerely, Troy A. Clarke, Navistar Chairman, President and CEO. b

2019 were: • PacLease Edmonton Kenworth: Calgary, Alberta • PacLease of South Florida: Doral and Clewiston, Florida • Allstate Leasing: Stewartville, Minnesota • MHC Truck Leasing: Omaha, Nebraska • JX PacLease: Morton, Illinois • Maska PacLease: Sherbrooke, Quebec According to Roemer, “Our customer retention rates are strong. When you combine premium trucks with our stringent preventive maintenance programs, wide selection of fleet services, and strength of the PacLease service network, then you have a combination for success. And that continues to be showcased with our year-end results.” b

the years, our customers have come to rely on custom spec’d PACCAR products, backed by a service network that we feel is second to none. Both have correlated directly to our sustained growth.” Over the past three years, PacLease has added 24 new locations, with seven coming in 2019. “Our franchises are seeing the growing demand for full-service leasing as well as quality Kenworth and Peterbilt trucks, and it’s why we continue to add locations to our network,” said Roemer. “This further strengthens our ability to service our customers.” The new PacLease locations joining PacLease in Source: PacLease

Page 47

NO MOUNT KIT AVAILABLE

2011 TRAILERMATE TM50, 700 hrs, 5,000 lbs @ 24” Stabilizers Down, Can be Truck Mounted

$14,800 + appl. taxes

SPECIAL PRICE

$39,500 + appl. taxes

PM16525S CRANE SERIES 16.5S - EN 12999, Max. lifting moment 108,540ft/lbs (15 t/m), Max. Cap. at Max. Reach: 1635lbs. @ 47”5’ (Kg 740 @ 14,45 mt), KnuckleBoom Crane w/ Double Links, Boom Pk. w/ 15° Negative Angle.

WWW.TRUCKPROVICTORIA.COM FB30 ELECTRIC 3 -TON, 16,500 lbs. c/w Zapi controller, Zibo battery & charger, pneumatic tires, side shift, 4.8M mass.

$19,500 + appl. taxes FD45 DIESEL 4.5 TON, 10,000 lbs. CT Power Counter Balance., 1104D Perkins Diesel Engine, Auto Trans., Forks Lift Height: 178”.

$38,600 + appl. taxes $54,900 + appl. taxes

ALSO AVAILABLE FLPG35 Forklift, Dual Fuel 3.5Ton.................................$26,500 4 x Auxiliary Out Riggers 14Ton................................$3,000 ea. FB25 Electric Forklift, 2.5-Ton.......

SPECIAL INSTALLED FOR 1 MONTH AS A DEMO UNIT PM35525SP CRANE SERIES 35.5 SP - Max Capacity at Max Reach: 4370 lbs @ 45’ 11” (1980 kg @ 14.0 mt) Continuous slewing.

........................................$17,500 Z120R-A13 2015 Barrel Clamp Fits class 2 or 3 Forklift Barrel Clamp & Rotate Function ..................$3,000

MARK SALMON Sales Manager

1-855-656-1689 | Cell: 250-889-1529

sales@pmindustries.ca

TRUCKPRO - PM INDUSTRIES - TRACTION 1785 Mills Road, North Saanich, BC

Office: 250-656-1689 | Fax: 250-656-1305

Page 48

Supply Post · supplypost.com

USMCA Is A Victory For Equipment Manufacturers Association of Equipment Manufacturers (AEM) president Dennis Slater issued the following statement after the President signed the United StatesMexico-Canada Agreement during a ceremony at the White House: “President Trump and

Congress have delivered a free trade agreement that works for equipment manufacturers, farmers, and working families across the country,” said Dennis Slater, president of AEM. “We thank President Trump, Vice President Pence, House

Speaker Pelosi, and Senate Majority Leader McConnell for their leadership and for putting policy ahead of politics to get this landmark deal across the finish line. The agreement restores certainty to the North American market and secures duty-free

access to our industry’s two largest export markets. It will help equipment manufacturers grow in the United States, compete globally, and support millions of familysustaining jobs across the country. We look forward to working closely with President Trump and Congress to make sure equipment manufacturers can compete and win in the global economy.” Several senior executives representing the equipment manufacturing industry also hailed the

1015 Great St. Prince George, BC V2N 2K8 Dwayne Renshaw 250-612-7512

Byron Roberts 250-640-9599

1015 Great Street, Prince George, BC, V2N 2K8

2020 FREIGHTLINER 114SD TANDEM/ TANDEM, DD13 450/1650, Allison 4000RDS, 40K FA, 46K RA, c/w 14 yard Bridgemaster mixer. Delay to Pay for 120 days, OAC through Daimler Financial.

2020 K-LINE 55T LOWBED, Hydraulic detach neck w/ﬂip extension compatible with tandem and tri-drive trucks. 10’ wide, Honda power unit plus plumbed for wet kit, beavertail rear end, boomstand.

2020 FREIGHTLINER 122SD TRI-DRIVE, X15 - 565/2050, RTLO-20918B, 20K FA, 69K RA, c/w Langfab 21’6” Hardox tub style box, hi-lift gate, air tarp, vibrator. Ask about Delay to Pay for 120 days ﬁnancing program.

2020 PEERLESS 9 AXLE SUPER B LOGGERS, 4 bundles of 9’6” bunks, 11R24.5 tires with lift axles on lead, rubber belting fenders on gooseneck, compatible for tandem and tri-drive trucks.

2018 PETERBILT 579 TANDEM, MX13 - 510/1850, 18-speed Eaton Ultrashift, super 40 RA, bal. of 5 year/800,000 km extended wty on engine, after treatment, and clutch. 4 to choose from.

2021 FREIGHTLINER M2 TANDEM, L9 - 350/1150, Allison 3000RDS, 18K FA, 40K RA, c/w Universal Handling roll off hoist, auto folding bumper, steel fenders, Pioneer adjustable gantry.

MAHINDRA TRACTORS, Spring is here, good selection of tractors from 22hp to 125hp. We also stock a variety of implements to get the job done.

1-800-595-4411

www.premiumtruck.ca

250-563-0696

April 2020 signing of the UMSCA by President Trump: Komatsu America: “The strong bi-partisan support of the USMCA indicates how important it was to update our trading rules,” said AEM CE Chair Rod Schrader, Chairman & CEO, Komatsu America. “USMCA will allow American manufacturers to establish more predictable trade relations and helps ensure fair trade for our products with our important trading partners, Canada and Mexico.” Blount International: “Increasing trade with Canada and Mexico, will help build our business, along with the entire agricultural industry by providing a growth base for equipment manufacturers like us,” said AEM Ag Chair Jerry Johnson, President, Farm, Ranch & Agriculture Division, Blount International. “Giving farmers more equitable trading opportunities with Mexico and Canada opens possibilities for growing net farm income, at a time when they

are faced with lower commodity prices, higher input costs, global uncertainty, and an onslaught of weather-related disasters.” Volvo Construction Equipment: “USMCA is essential for growth in the manufacturing backbone of the American economy—equipment manufacturers depend on low barriers to trade, especially with our closest neighbors,” said AEM CE Vice Chair Stephen Roy, Senior Vice President North America, Volvo Construction Equipment. “We commend the passage of this modern North American trade agreement and hope it signals continued bi-partisan work to create positive conditions for trade and industry.” AGCO Corporation: “AGCO appreciates the work Congress and the Trump Administration have put forth to secure free and fair trade with Mexico and Canada,” said AEM Board Director Bob Crain, Senior Vice PresiContinued on page 49

Key Wearable Tech Trends In The Mining Industry Wearables are evolving into important tools in the expanding Internet of Things (IoT) landscape, driven by a combination of technological progress and market demand, according to GlobalData, a leading data and analytics company. The company’s latest report, ‘Wearable Tech in Mining – Thematic Research’, explores how wearables will be the next big consumer technology, with their impact similar to that of the smartphone. Minimizing workplace injuries is one of the most important aspects of wearable technology. Wearable technologies such as smart helmets can be employed to assess the health and wellbeing of workers. US-based Guardhat has developed a smart helmet that features sensors that can detect workers’ safety in their immediate surroundings. A major aspect of wearable technology is to maintain equipment and inspect signs of failure to minimize downtime. In case of critical issues, technicians require an expert’s help,

but bringing experts from onshore offices to offshore mines increases the overall expenses and time for the inspection and repairing of equipment. Smart glasses or smart helmets could be useful in reducing the time and cost it takes to inspect and repair equipment. Wireless connectivity can also assist a field engineer to receive expert guidance in real time. Wearable technology can be used to efficiently track the workforce during mine operations. Using location-based technologies and wireless connectivity, the device can feed a worker’s real-time location to the onshore monitoring center, and in case of emergencies, quickly remove workers from hazardous unforeseen events. Canadian-based K4 Integration incorporates RFID tags into personalized hard hats for each worker, providing mine supervisors with real-time information of their location and the state of the mine. b Source: GlobalData

April 2020 Continued from page 48

dent and General Manager, AGCO Corporation. “The agreement signed by President Trump will greatly improve market stability for our customers and dealers in the U.S., Canada and Mexico. Agriculture is the backbone of our economy. This agreement will directly benefit American farmers, U.S. equipment manufacturers and the rural communities that rely on these important sectors of our economy, by supporting jobs and bringing needed financial stability back to the agricultural landscape.” Case IH: “Case IH is pleased to see the passage of USMCA; there are improvements made in USMCA that support America’s farmers, rural communities and businesses,” said AEM Board Director Scott Harris, Case IH Vice President, North America. With commodity price stagnation and global market uncertainty, solidifying and expanding the North American mar-

Supply Post · Our Readers Are Your Buyers ket is absolutely critical for the broader agricultural community, our core dealer partners, and customers.” Caterpillar Inc.: “The USMCA is good for America and American manufacturing, allowing U.S. manufacturers to draw on the strengths of our North American trading partners to make U.S.-produced products more competitive globally,” says AEM Board Director, Phil Kelliher, Caterpillar vice president. We appreciate the bipartisan support it received in Congress and are very pleased to see it signed into law.” Gradall Industries: “The United States-Mexico-Canada Agreement will modernize and strengthen trade with Mexico and Canada in ways that expand economic opportunity and increase competitiveness for equipment manufacturers in Ohio,” said AEM Board Director Michael Haberman, President, Gradall Industries. “It is an immediate shot in the arm for our industry and provides the

Komatsu Bringing Together Several Of Its Mining Product Lines Through Rebrand Change will affect surface blasthole drills and wheel loaders, underground hard rock. Signifying the ongoing evolution and rapid transformation of its growing mining product offerings, Komatsu today announced plans to rebrand its underground hard rock equipment, surface wheel loaders and new line of blasthole drills to reflect the company’s united focus on growth in these areas. The company will retain its iconic P&H and Joy brands for the products longest associated with those names: P&H for its electric and hydraulic rope shovels, draglines, and 320XPC blasthole drill; Joy for longwall systems, and room and pillar equipment. Rebranding as Komatsu all surface wheel loaders, new blasthole drills and all underground hard rock equipment, expands the Komatsu brand in mining, while retaining the legacies of its other respected brands, said Jeffrey Dawes, President and CEO of Kom-

atsu Mining. The first rebranded product, the Komatsu ZT44 track drill, made its debut at CONEXPO-CON/ AGG 2020 in Las Vegas at Komatsu booth N-10825. “Building on the growth of our mining portfolio, we’re excited to unite more products under the Komatsu brand, while respecting the history and value of the P&H and Joy brands,” Dawes said. “As we approach Komatsu’s 100th anniversary, it’s a great moment to expand the brand in mining and celebrate the growth of these product lines.” The company plans to debut new Komatsubranded offerings for surface and underground hard rock mining at MINExpo INTERNATIONAL 2020, to be held September 28-30 in Las Vegas, as well as rebranded offerings from its current portfolio. Rebranding will include new product nomenclature, machine colors and decals. b Source: Komatsu

long-term certainty that our industry needs to continue to grow and prosper.” Vermeer Corporation: “As a manufacturer of large construction and agricultural equipment making an impact on communities around the world, we look forward to moves that make getting Vermeer equipment in the hands of those who need it easier than before,” said AEM Board Director Jason Andringa, President and CEO, Vermeer Corporation. “Today’s signing of the USMCA signals progress for manufacturers and

markets across the country and beyond by removing uncertainty and paving the way for continued economic growth. Vermeer Corporation thanks the Administration and legislators in working together to get this done for America!” Since the creation of NAFTA two decades ago, equipment manufacturers have benefited greatly from duty-free market access to our industry’s two largest export markets, Canada and Mexico. The USMCA builds on the success of NAFTA to deliver an updat-

Page 49 ed North American trade agreement for the 21st century. From its inception, AEM worked with both the Trump Administration and Congress to ensure passage of a trade agreement that fulfills many of our industry’s goals and strengthens equipment manufacturing in North America. AEM activated equipment manufacturing workers and supporters, reaching members of Congress with a steady stream of pro-USMCA letters, calls, and meetings. AEM also hosted the Honorable Mike Pence, Vice

President of the United States, at an equipment manufacturing facility earlier this year to build support for the trade agreement, and ran a national public education campaign on the various benefits of USMCA. AEM is also a member of the 600 association and business-member strong USMCA Coalition. Equipment manufacturers support 1.5 million jobs and contributes $188 billion each year in the U.S. and Canada. b Source: AEM

#5-1340 Stevens Road, West Kelowna, BC V1Z 1G2 Sean Westerman 250-869-9415

Cody Fortin 250-869-9448

1015 Great Street, Prince George, BC, V2N 2K8

STK# 30197B

STK# 30149A

STK# 30198B

2012 FREIGHTLINER CASCADIA DD15, 13 Speed truck, 12 Front / 40 Rears, 232” Wheelbase, with great history on the truck is ready to go to work! P.O.R.

2013 FREIGHTLINER 122SD DD15, 13 Speed truck, 13.2 Front / 40 Rears, 244” Wheelbase, with great history on the truck is ready to go to work! P.O.R.

2020 FREIGHTLINER 122SD, Cummins X15, Eaton 18 Speed, 20 Front / 69 Rears, 268" WB. P.O.R.

STK# 30190A

STK# 301452A

STK# 30151A

2021 FREIGHTLINER NEW CASCADIA DETROIT DD15 - 505HP, DT-12 Transmission, 12.5 Front, 40 Rears, 3.23 Ratio. P.O.R.

2020 FREIGHTLINER BUSINESS CLASS M2-106, Cummins 6.7, Allison Trans., New 24’ Collins Box with Tuck Away Gate. P.O.R.

2020 FREIGHTLINER 122SD, 70" Mid Roof Sleeper, Detroit DD16 - 600 HP, Eaton Ultra shift, 13.3 Front / 40 Rears, 244" WB. P.O.R.

STK# 30150A

STK# 30065A

2020 FREIGHTLINER 122SD, c/w 34” Sleeper, Detroit DD16 - 600 HP, Eaton 18 Speed, 16 Front / 46 Rears, 244” WB. P.O.R.

250-769-7255 1-888-878-2511

2018 MITSUBISHI FUSO FE-180 with Knapheide Landscaper Body, c/w Scissor Hoist, Tow Hitch, Pull Tarp System. Inquire Today! P.O.R.

STK# 30127A

NEW FUSO FE160, Gas, 15,995 lb GVWR, New Collins 16' Box, V8 6.0L Gas Engine, Allison 1000 Transmission. P.O.R.

www.premiumtruck.ca

@premiumtruckkelowna

Supply Post · supplypost.com

April 2020

At CONEXPO, International Truck introduced a new lightweight spec for its International HV Series. The new HV50B mixer package removes over 1,000 lbs. of weight from the vehicle, with engineering optimizations that allow drivers to haul up to 9.75 cubic yards of concrete while staying under 66,000 lbs. GVW. The result of these changes means that customers currently only able to legally carry 9 cubic yards of concrete will be able to increase their revenue by $750 per truck, per day. The spec also includes fringe benefits such as enhanced safety due to improved line of sight for the driver. The spec was designed solely with a focus on the customer. In fact, the idea stemmed from a conversation be-

tween the company and a potential customer. “A major concrete producer was excited about our HV series but had some constructive feedback regarding the chassis weight and line of sight for their application,” said Mark Stasell, vice president, Vocational Truck Business, Navistar. “As with all customer feedback, we took that challenge to heart and wanted to respond to these suggestions. We put together a small, passionate team and got creative from a design standpoint.” “The result is the HV Series that you saw in our booth,” Stasell continued. “A physical representation of how we do business – with the customer at the center of everything we do.” The spec was designed specifically for

saving pounds that don’t affect the integrity of the vehicle. To start, it features an all-aluminum, lighter bumper that is used on the International HX series. The team also optimized the front suspension components; allowing for a lower hood height which leads to the increased visibility for the driver and improved safety on the work site. The fuel water separator and air dryer were also mounted on the same bracket; saving the weight of multiple brackets and getting out of the way for concrete mixer hydraulics. In addition, the team optimized crossmember locations, further reducing the weight of the chassis. This also leads to less cost for the customer, as Truck Equipment Manufacturers do not need to relocate crossmembers.

NEW LOCATION: 4600 Collier Place, Williams Lake, BC V2G 5E9

Eli Bergen: 250-267-8054

e.bergen@ premiumtruck.ca

Call for Pricing 2020 RAJA SUPER B FLATDECKS - 3 to choose from, c/w 2-60” aluminum toolboxes, 2 dunnage racks, steel or aluminum wheels, 22.5 or 24.5 tires.

Call for Pricing 2020 K-LINE 55T LOWBED, 10’ wide x 21-1/2’ well, hyd. neck comp. for tri-drive with ﬂip ext., encl. Honda power unit, beavertail rear w/ boomstand & HD rubber fenders, jeep and booster compatible.

250-398-7411 | 1-877-878-2516

Call for Pricing MAHINDRA 9125P 125hp 4 cyl diesel, power shuttle transmission, loader lift capacity of 5415 lbs. @ 162”, 3 point hitch lift capacity of 7628 lbs.

Call for Pricing 2020 FREIGHTLINER 122SD TANDEM X15 - 605/2050, RTLO20918B trans., 14700 lb. front axle, 46000 wide track rear axles with Airliner susp., 34” sleeper, severe duty sliding 5th wheel.

www.premiumtruck.ca

NAVISTAR

International Truck Introduces New Lightweight HV Series Mixer

“With this spec, we were able to reduce the weight of our vehicle without compromising any job site performance,” said Stasell. “Reduced vehicle weight

means heavier loads per trip and per truck, which directly improves our customers’ bottom lines.” “I’m very proud of what our team accomplished

Renault Trucks T01 Racing: The New Special Used Truck Edition To mark the arrival of the 480 hp 13 L engine in its used truck range, Renault Trucks is launching the T 01 Racing. Redesigned by the Halle du Design, this new special edition draws inspiration from the world of car racing. Reconditioned in full in the Used Trucks Factory, the Renault Trucks T 01 Racing comes complete with a one-year manufacturer’s warranty. Renault Trucks is offering a new sporty-looking special edition to mark the arrival of the 48 hp 13 L engine in its used trucks range: the Renault Trucks T 01 Racing. The lines of this latestgeneration Euro 6 used tractor have been enhanced by the designers of the Halle du Design (HDD); an entity owned by the French manufacturer. They have drawn inspiration from the world of car racing to create a modern, dynamic design that perfectly conveys the technical performance of the vehicle. On the outside, the paintwork of the Renault Trucks T 01 Racing combines three shades on an EKLA white background, namely a shimmering black, flaming red and tangy yellow. The inside of the headlight reflectors

with this project and look forward to continuing to optimize our offerings based on the needs of our customers.” b Source: Navistar components, LED light accessories and horn, or request specific paint. The metamorphosis of the Renault Trucks T 01 Racing occurs in the Used Trucks Factory, the unit dedicated to transforming and adapting the manufacturer’s used vehicles, which is located within the Bourg-en-Bresse industrial site and applies the same processes as for a new vehicle. The Renault Trucks T 01 Racing is a recent used vehicle, selected, prepared and transformed by experts in the Renault Trucks network, in accordance with the constructor’s standards and using certified, original parts. It has low mileage and comes complete with a 12-month or 120,000 km manufacturer’s warranty. b

are painted flaming red. Exclusive reflective stickers, reminiscent of the world of racing, are affixed to the vehicle. Last but not least, paintwork on the sun visor, hub caps, radiator grille and rear view mirrors, adds the finishing touch. The tone is set the minute the cabin door is opened, as the entry bars also feature the special flaming red and tangy yellow paint. The driver then enters a carbon interior, with an all-round anthracite grey look. The red handles can be removed from the glove compartment. As an option, customers can have additional carbon Source: Renault

RENAULT

Page 50

April 2020

Supply Post · Our Readers Are Your Buyers

Page 51

THOUSANDS OF NEW & USED EQUIPMENT, TRUCKS, TRAILERS, FARM EQUIPMENT AND MORE - IN YOUR BACK POCKET! Receive FREE Work Gloves with a Paid 3 Year Subscription!

SUBSCRIBE TO THE SUPPLY POST NEWSPAPER AND RECEIVE: • 12 issues per year • FREE work gloves with a paid 3 year subscription • Over 2,000 new & used units listed for sale or rent, totalling over $125,000,000 every month! • Stories about the people and news in your industry: Construction, Roadbuilding, Forestry, Aggregates & Mining, Trucking, Agriculture, and more.

Call 1-800-663-4802

or visit https://www.supplypost.com/subscribe to get started circulation@supplypost.com | 604-607-5577 | Fax 604-607-0533

www.supplypost.com

Page 52

Supply Post · supplypost.com

April 2020

CONEXPO-CON/AGG

The Construction Industry Came Together In A Big Way At ConExpo-Con/Agg 2020

One of the highlights of the show was the 3D-printed statue by artist Anna Benjamin.

FRONT PAGE STORY: Equipment industry in the U.S. remains optimistic, despite concerns about COVID-19.

ultiple construction and construction materials industry segments converged on the Las Vegas Convention Center and Festival Grounds as they came together for CONEXPO-CON/AGG & IFPE this week to unveil new technologies and products, share knowledge, network with industry peers and buy equipment. Registrations for the show totaled over 130,000. At the conclusion of the

CONEXPO-CON/AGG

Show visitors trying out some equipment at Komatsu’s display.

show, cancellations from international attendees totaled less than 1 percent. “We refer to CONEXPOCON/AGG as the ‘heavy metal’ show, but it’s more than that. It’s also small equipment, education and technology. And that was reflected in every way this week,” said Mary Erholtz, Vice President of Marketing at Superior Industries and CONEXPO-CON/AGG 2020 Show Chairperson. “Giant machines, incredible ex-

hibits, fantastic education and huge expectations. Organizers of CONEXPOCON/AGG have a legacy of building and innovating on previous shows, and the 2020 gathering extends that record of success. “This has been one of the best editions of CONEXPO-CON/AGG – ever,” continued Erholtz. Exhibitors across the show, from the Festival Grounds to North Hall to Bronze Lot to South Hall,

expressed enthusiasm for the tremendous engagement they received from contractors and producers looking to purchase equipment. According to IFPE Show Chairperson David Price, Global Marketing Manager of HydraForce Inc., “The crowd was much better than expected under the circumstances and most importantly, the right buyers were on the show floor. We were very pleased with the strong showing from the 300-plus exhibitors at IFPE 2020, and we are looking forward to the 2023 show.” Mike Ballweber, President, Doosan Bobcat echoed those sentiments, “Tuesday for us was record breaking in terms of leads and attendance at our booth, which is how we measure how successful the show is for us. We had more people to our booth on the first day than all of the 2017 show. This is a one-every-three-years show, and our dealers and customers were really excited to be here.” With growing concerns about COVID-19, show management worked closely with the Las Vegas Convention and Visitors Authority and the Southern Nevada Health District to make sure exhibitors, vendors and attendees were provided with heightened cleaning services and hand

sanitizers to help reduce the spread of germs and enable show participation to stay healthy onsite at the show. “We have been pleased with the success of the overall show and attendance in our booth,” said Ingo Schiller, President and CEO of Tadano America Corporation. “The management team at CONEXPO-CON/AGG has been monitoring the situation and they made a very difficult decision to close the show a day early. We appreciate their leadership and we look forward to CONEXPO-CON/AGG 2023.” Key metrics reflect overall quality of CONEXPOCON/AGG and IFPE 2020 attendees: • U.S. buyer attendance increased 8 percent from the 2017 show, and total buyer attendance improved by almost 5 percent. • Overall contractor and producer attendance grew by 14 percent. • 6-in-7 attendees serve in a decision-making role. • Total registered attendance reached over 130,000 for the week. • Attendees purchased a record-breaking 75,622 tickets for education sessions at the show, a 46-percent increase from the 2017 show. At the same time, the technological change revo-

lutionizing these industries was pervasive across the shows’ record 2.7 millionplus net square feet of exhibits featuring 2300-plus exhibitors from the leading U.S. and global manufacturers, from multinational giants to small firms with specialized products. Other highlights included: • Partnership with women in construction groups to highlight the growing role women play in the industry, including the unveiling of the world’s largest 3-D printed statute of a human to honor the growing role women play in the construction industry. • Workforce solutions area in the Festival Lot that showcased industry recruitment best practices. • The Tech Experience returned for a second year and focused on modern mobility, sustainability and smart cities. • The first-ever Fluid Power Hour for the co-located IFPE show., which featured an opportunity for engineers to network with their peers on the show floor. The next CONEXPOCON/AGG will be held March 14-18, 2023 in Las Vegas, Nevada. For more information on CONEXPO-CON/AGG, visit conexpoconagg.com. b Source: ConExpo

April 2020 PHOTOS THIS PAGE: DEBRA WATSON & JAKE PETERSON

Supply Post Â· Our Readers Are Your Buyers

Page 53

TRUCK PHOTO ADS Book your ad online at: supplypost.com/advertise/classifieds or call 1-800-663-4802 today! PAGE 54 · APRIL 2020 (2) 2012 KENWORTH T660s

WWW.SUPPLYPOST.COM 2019 RAM 5500 4X4 11 FT SERVICE BODY

2019 RAM 3500 4X4 SERVICE BODY

2019 RAM 5500 4X4 SERVICE DECK

IN PRODUCTION – COMING SOON ISX, 235WB, 1) Eaton 18 Autoselect, 1) Eaton 18, Super 40’s 4.10. 1,200,000 km $36,000. Langley, BC.

1525KM, 6.7 Cummins Turbo Diesel, 6 Spd Aisin auto, 4X4, 11' Wilcox Service Body, VMac VR70 U/H Comp., 5,000 LB Auto Crane EHC5 w/Nexstar cont., American Eagle 8 drawer tool chest, bolt bins & drawers both sides. Fleet Price $169,429 + $698 Admin Service + Taxes. Stk# 19R57036. DL# 30541.

1525KM, 2019 Crew Cab Chassis, 6.7 Cummins Turbo Diesel, 6 Spd Aisin auto, 4X4, 9ft Mechanics Service Body, VMac G30 Rotary Gas Compressor, American Eagle 8 drawer tool chest. Fleet Price $110,569 + $698 Ad min Service,+ Taxes. Stk#19C35175. DL# 30541 .

1525 KM, 6.7 Cummins Turbo, 6 Spd Aisin, 4X4, 11’ WTW service body, 5000 Lb EHC5 Auto Crane w/pro. controller, VMac G30 Rotary Comp., Honda pwr, remotes, AE tool chest, b/u camera. Fleet Price $155,429 + $698 Admin Service + Taxes. Stk# 19R57037. DL#30541.

KEN JOHNSON TRUCKING LTD.

NORTHLAND CHRYSLER DODGE JEEP RAM

2020 11-FOOT MB11

2019 RAM 5500 4X4 SLT DIESEL SERVICE TRUCK

1994 VOLVO A35C

604 882 3574 · 1-888 740 3322 kjohnson@kjtrucking.com

2020 FREIGHTLINER M2-106

Call Murray 1-888-457-6908 www.northlanddodge.ca

2020 Freightliner M2-106, Cummins B6.7 300 hp With Allison 2500 Rds, 12,000fa 21,000ra Hydraulic Brakes. Rigged With Fort Fabrication Ampliroll Hook Lift. In Stock And Ready For Work!

All Aluminum Construction, Interior LED Lights in Every Cabinet, 7-Drawers, 13-Shelves, 8-D-Rings, 3pc Galley Cover, Crane Prep on LH/RH, In-Stock ready to ship, Starting at $35,999. See Page 4 for more details.

P&R TRUCK CENTRE

MILRON TRUCK BODIES

Ed Murray: 250-812-2925 2020 LAZER INOX STAINLESS STEEL TRIDEM TC407

1-888-451-3258 · sales@milron.com

Call Murray 1-888-457-6908 www.northlanddodge.ca

6.7L Cummins, 6 Spd Aisin Trans, SLT trim, Remote Start, B/U Camera, Alum Rims, Shift on Fly 4WD, Vinyl Flooring, Luxury Group, c/w 11’ Brutus Alum Service Body, VMAC VR70 Compr, Cobra 5500RSE Crane.

6X6 Articulated Dump Truck C/W Retarder – 19,011 HRS. $41,500.

CALL JURI

CALL KEVIN

780-907-4761 · juri.rastovski@calmont.ca

2013 TEREX TA400

2008 VOLVO A30E

604-720-7944 · mr.cleancar@shaw.ca YOUR AD COULD BE HERE...

Starting at $129 per truck ad 44,000L Capacity, 2 Compartments, Heated Belly, Mounted Cabinet Comes Fully Rigged w/ T&E Pump, Titan Gauges & Load Hose, Stk# 10728, $224,995.

2013 Terex TA400, 3,102 Hrs, Stk #15E3106. $238,000. Langley, BC. See page 24 for more.

6x6 Articulated Dump Truck – 14,320 HRS – Motor Just Rebuilt less than 250 Hrs ago. C/W Retarder, low profile tires & chains, and box heater. $135,000 for the truck and $2500 for the chains.

EDMONTON TRAILER

INLAND GROUP - LANGLEY

CALL KEVIN

1-855-998-0716

604-607-0300 · langleysales@inland-group.com

604-720-7944 · mr.cleancar@shaw.ca

• Full colour photo ad of your new or used truck. • Exposure to 13,000+ Supply Post Readers, and 12,000+ Online Visitors. • Starting at $129 to advertise! (per individual unit). • 45 words max.

CALL SUPPLY POST TODAY! 1-800-663-4802

SUPPLY POST E-NEWSLETTER

April 2020

Supply Post · Our Readers Are Your Buyers

E-NEWSLETTER QUICK FACTS • 7,000+ subscribers from across Canada • 24 scheduled newsletters per year • 4 featured listing spaces available each issue • 2 banner spaces available

FEATURED LISTINGS Show off your best trucks or equipment to qualified buyers across Canada. Space is combined with print front covers, supplypost.com and our social media platforms. Exposure to over 50,000 industry professionals. Call today! 1-800-663-4802

DIGITAL EDITIONS GET THE PAPER FIRST, MAKE THE DEAL FIRST! The Digital Edition is available in our E-News the day after it is sent to print.

THE LATEST NEWS We feature the latest news from logging, trucking and roadbuilding along with new product releases and much more! Have an announcement or job story? Send it to editorial@supplypost.com

BANNER ADS Brand your business with quality banner space. 7000+ subscribers. Sizes: 960 x 120 pixels Space available now. Pre-book space throughout the year. Call today! 1-800-663-4802

SUBSCRIBE TODAY! www.supplypost.com/e-news

Page 55

Page 56

Supply Post Â· supplypost.com

April 2020

WWW.OCEANTRAILER.COM

N E P O W NO

IN PORT KELLS! 9697 190 STREET SURREY, BC V4N 3M8

604-455-0885

36 month Long Term Rental

$1,500 Canadian per month for a 53' Tandem Axle OAC

36 month Long Term Rental

$1,600 Canadian per month for a 53' Tridem Axle OAC

Wilson Quad Flats

Super B Walking Floor Chip Hauler

Tridem Step Deck Tautliner

Renn Super B Flats

Delta (800) 891-8858

SUPER B GRAIN

REEFERS IN STOCK!

Nanaimo (877) 878-5979

Fontaine All Aluminum Flat

Wilson Tridem Step Deck *IN STOCK NOW*

Prince Rupert (250) 627-1981

Edmonton (800) 610-1019

Tridem Combo Chassis - In Stock

Neustar Demo Box

New All Steel Tridem, Flats & Steps.

Calgary (877) 720-7171

Winnipeg (866) 397-5524

10807 - 209 Street, Edmonton, AB T5S 1Z7

1-800-663-0715 • 780-452-7021 Fax: 780-453-1477

47 Forest Plain Road, Oro-Medonte, ON L3V 0R4

1-866-404-5233 • 705-325-2777 Fax: 705-325-9777

www.jadeequipment.com | info@jadeequipment.com

PARTS SALES SERVICE RENTALS CURRENTLY DISMANTLING

ENGINES FOR SALE

JD608IH & 6090H

2007 VOLVO A40E 6X6

CUMMINS ALSO AVAILABLE

FINAL DRIVE FOR SALE

KOMATSU WA380-5L

2013 VOLVO G960B

MACHINES FOR SALE 2015 JOHN DEERE 180GLC 2,100 hrs., 32” shoes, air sus seat, heated, 1 PC boom w/arm cyl & thumb, arm 10’6” rev fan, hyd. thumb, digging bucket, clean up bucket

JD RM100072RX FINAL DRIVE CALL FOR DETAILS

$164,500 OBO.

2007 VOLVO G970 diesel engine (210 250 HP) VOLVO HTE1160 transmission, Low profile cab c/w air conditioning, 14’ moldboard, accumulators, float valves, 20.5x25 tires, 5,700 hours. CALL FOR PRICING!

Celebrating 32 Years! 1988-2020

VOLVO FINAL DRIVE EXCHANGE