Supply Post October 2019 by Supply Post Newspaper

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER · SUPPLYPOST.COM

VOL. 48 · NO. 10

Family Owned Since 1971

Scan for more info

OCTOBER 2019

2005 JOHN DEERE 772G

BARCO 22-24 MAN FLOAT CAMP

2007 CAT D9T U-DOZER

2014 PETERBILT 367 LNG

STK #0U665528, 1886 Hours, Prince George, BC $335,000 CDN, $251,900 USD.

Completely Rebuilt Inside & Out in 2018, Over $1.2 Million in Upgrades & Enhancements. $1,500,000. See pg 41 for more info. CHALLENGER ENTERPRISES LTD. 250-591-0626 ap@challengerenterprises.ca

U-dozer w/tilts, 2 shank MS ripper, A/C, priced to sell. Reduced to $425,000 USD. See page 42 for more.

LNG Fuel, 46160 Rockwells 135,000 Original Kms. 6 Matching Units Available. See page 62.

SIMPSON & SONS 1-844-995-0736

DENNIS McAULEY truxperts@live.ca · 780-387-6649

BRANDT PHONE: (888) 2-BRANDT

A Legacy Of Excellence B.C.-based Wheeler Equipment continues the legacy of Washington Iron Works forestry machines and yarders in the Pacific Northwest. See page 28

Wheeler Equipment has been building and re-furbishing skyline draglines for Nelson River Construction since 2005

Heavy Equipment Part & Component Specialists

REBUILT. IN STOCK. READY TO SHIP. REGISTER TODAY for our 'REAL TIME' Parts Inventory Online: BRIKERS.COM/Register

Page 2

Supply Post · supplypost.com

RENTALS

■

SALES

■

October 2019

CONTRACTING

SALES & RENTALS: Dave 778-855-4190 dave@unitedearthcontractors.com OFFICE: 604-940-0001 | Fax 604-940-0005

$100,000

$59,000

1 of 2 - JD 450D, thumb, guarded, catwalks, 2 buckets 12K hours.

JD 350D, thumb, guarded, catwalks, 12K hours.

$110,000

$83,000

2003 CAT 140H MOTOR GRADER 9,200hrs, tires at 90% plus. This is one great unit and ready to work.

LOW PRICE 2011 CAT 160M MOTOR GRADER 13,000 hrs, tires at 85% and machine is ready to work.

$100,000 ea.

$73,000

CAT 980G LOADER Well maintained unit with approx. 20,000 hrs. Matched Bridgestone tires, approx. 65%.

$195,000

$250,000

1 OF 2 UNITS AVAILABLE. 2007 KOMATSU HM 300-2 Approx. 9000-10000 hrs on easch. Good runners, ready to work.

$88,000

$40,000

2014 VOLVO A30F 80% tires, 750/65R25 wise tires, rear camera, approx. 9,000 hours and ready to work. (1 of 2)

D L SO

VOLVO A35 good runner, tires OK, ready to work.

$74,000 ea.

2 LEFT! 1 OF 2 VOLVO A25C, All in good condition and ready to work Very very clean units.

$75,000

$145,000

NEW U/C 2013 JD 350G GP & dig bucket, U/C 90%, pads look new. Only 4,600 hrs! This machine is new! New catwalks.

$37,000

2002 VIBROMAX PADFOOT ROLLER Cab, heat, clean unit, 8,000 hrs.

JOHN DEERE 240D 8,200 hrs, W/B lugging and Q/C, new U/C, Good runner and ready to work.

2008 CAT D6T 6 WAY DOZER A/C, diﬀ steer, SystemOne U/C, ripper and forestry pkg avail. hard nose and front end all rebuilt. Great unit, only 14,000 hrs. Min. hrs on rebuilt engine.

$42,000

$39,000

2008 BOMAG SMOOTH DRUM ROLLER Bolt-on pad foot option. Clean machines and ready to work. Cab, A/C.

2004 INGERSOLL-RAND SD 116DX SMOOTH DRUM ROLLER Cab, A/C, and ready to work. Very clean unit.

2005 D6R XL U/C 75% good runner, well maintained and ready to work.

STARTING AT

$75,000

VOLVO A30D ROCK TRUCKS Wide selection with ranging hours all ready to work.

FIND MORE AT UNITEDEARTHCONTRACTORS.COM

October 2019

Supply Post · Our Readers Are Your Buyers

Page 3

4204 42 Ave., Innisfail, AB

CALL TODAY! 1-844-470-4608

2014 VOLVO MC115C SKID STEER, STK #2389, Enclosed Cab, (Volvo) Diesel, Heat/Air, Aux. Hydraulics, Q/C, ISO/H Pattern Control, 74 HP, 2,700lb Lift, 882 Hrs ..................................................................................................$43,000.

2014 CATERPILLAR 246D SKID STEER, STK #1627, Enclosed Cab, (CAT) Diesel, Heat, Air, Ride Control, Hyd. Q/C, Positive Air Shutoff, 74HP, 2,150lb Lift Capacity, Counter Weights, 954 Hrs .................................................................................$42,500.

2014 CATERPILLAR 262D SKID STEER, STK #1676, Enclosed Cab, (CAT) Diesel, Heat, Air, Ride Control, Hyd. Q/C, Positive Air Shutoff, 74HP, 2,700lb Lift Capacity, Counter Weights, 1,983 Hrs .............................................................................$45,000.

2014 BOBCAT S550 SKID STEER, STK #2353, Enclosed Cab, (Kubota) Diesel, Heat/Air, Aux. Hydraulics, Hand/Foot Controls, 61 HP, 1,750lb Lift, 3,631 Hrs ..........................$29,500.

2013 GENIE GTH-5519 TELEHANDLER, STK #2423, 4WD, (Deutz) Diesel, Enclosed Cab, Heat, Aux. Hydraulics, 3-Way Steering, 19’ Lift Hgt., 11’ Horz. Reach, 48” Rotating Carriage w/ Tilt, 63 HP, 5,500lb Lift, 4,320 Hrs.................................. $51,500.

2012 JCB 550-170 TELEHANDLER, STK #2253, 4WD, (JCB) Diesel, Block Heater, Encl. Cab, Heat, Fan, 100 HP, Aux. Hyd., 55’ Lift Hgt., 41’ Horz. Reach, Frame Tilt, 3-Way Steering, 47” Forks on a 64” Tilt Carriage, 10,000lb Lift, 7,740 Hrs ................................................................................................$66,500.

2007 SKYTRAK 8042 TELEHANDLER, STK #2312, 4WD, (Cummins) Diesel, Enclosed Cab, Heat, 100 HP, 42’ Lift Hgt., 26’ Horz. Reach, Positive Air Shutoff, Frame Tilt, 3-Way Steering, 8,000lb Lift, 7,740 Hrs......................................$42,500.

2012 XTREME XR1255 TELEHANDLER, STK #2345, 4WD, Enclosed Cab, (Perkins) Diesel, Block Heater, Heat, Fan, Aux. Hyd., 55’ Lift Hgt., 38’ Horz. Reach, 3-Way Steering, Frame Tilt, Outriggers, Pos. Air Shutoff, Counter Weights, 12,000lb Lift, 2,005 Hrs ..........................................................................$117,500.

2010 JCB 550-140 TELEHANDLER, STK #2348, 4WD, (JCB) Diesel, Enclosed Cab, Heat, Fan, Aux. Hyd., 100 HP, 44” Lift Hgt., 31” Horz. Reach, 3-Way Steering, Frame Tilt, Outriggers, 10,000lb Lift, 6,398 Hrs ......................................................$64,500

2011 VOLVO BL70 BACKHOE, STK #2309, (Volvo) Diesel, 4WD, Enclosed Cab, Heat, Air, Aux. Hyd., Outriggers, Extend-A-Hoe, 94HP, 92” Frt. Bkt., 21” Rear Dig Bkt., 14’ Dig Depth, 3,127 Hrs ................................................................$56,500.

2010 JOHN DEERE 310SJ BACKHOE, STK #1980, Enclosed Cab, (John Deere) Diesel, 4×4, Extend-a-Hoe, Heat, Air, Ride Control, 92 HP, 90” Front Bucket, 23” Rear Dig Bucket, 14 Dig Depth, 5,748 Hrs ....................................................$48,500.

2005 CASE 580M TURBO SII, STK #2236, (Case) Family III 445/M2 Diesel, Heat, Air, Extend-a-Hoe, Auxiliary Hydraulics, Outriggers, Ride Control, 80 HP, 82” Loader, 17” Tooth Rear Dig, 6,124 Hrs ...............................................................................$46,500.

2015 WACKER NEUSON ST35 SKID STEER, STK #2392, Enclosed Cab, (Perkins) Diesel, Heat/Air, Aux. Hydraulics, 2-Spd., Q/C, 74 HP, ISO, 78” Tooth Bkt., 2,450 lb Lift, 1,943 Hrs ..............................................................................$41,500.

2013 KUBOTA SVL75 SKID STEER, STK #2386, Enclosed Cab, (Kubota) Diesel, Heat/Air, 2-Spd., Aux. Hyd., Q/C, Hi-Flow, Hand Control, 74 HP, 72” Smooth Bkt., 3,285lb Lift, 3,478 Hrs ................................................................................$38,000.

2017 CATERPILLAR 279D SKID STEER, STK #2223, Enclosed Cab, (CAT) Diesel 3.3L, Heat, Air, 2-Speed, Aux. Hyd., Quick Connect, Ride Control, Hand/Foot Control, 72HP, 3,000lb Lift, 870 Hrs .........................................................................$77,500.

2005 CAT 287B SKID STEER, STK #2134, Enclosed Cab, (CAT) Diesel, Heat/Air, Aux. Hydraulics, Quick Connect, Hand Control, 81 HP, 3,597lb Lift, Hours Unknown ..................$32,500.

2016 TEREX TC16 MINI EXCAVATOR, STK #2383, (Kubota) Diesel, Enclosed Cab, Heat, 2-Spd., Counter Weights, ISO Control, 18 HP, 17” Tooth Bkt., 53” Blade, 273 Hrs ..................................................................................................$23,500.

1998 LINK-BELT 2800 QUANTUM EXCAVATOR, STK #2192, Enclosed Cab, Heat/Air Conditioning, (Isuzu) Diesel, 32” Tracks, 35” Tooth Bucket, 11,042 Hrs..........................$44,500.

2006 DOOSAN DAEWOO 225 LCV EXCAVATOR, STK #2234, Enclosed Cab, (Doosan) DB58TIS Engine, Heat, 40” Digging Bucket , Frost Tooth Bucket, 31.5” Tracks, 14,558 Hrs..........................................................................................$50,000.

2 MORE AVAILABLE! 2012 GENIE S65 STRAIGHT BOOM LIFT, STK #2289, 4WD, (D) Diesel, Block Heater, 65’ Platform Height, 56’ Horizontal Reach, 8’ Platform, PAS, Foam Filled Tires, 500lb Lift, 3,718 Hrs...................................$68,500.

2012 GENIE S65 STRAIGHT BOOM LIFT, STK #2290 – 4WD, (Deutz) Diesel, Block Heater, 65’ Platform Height, 56’ Horizontal Reach, 8’ Platform, Positive Air Shutoff, Foam Filled Tires, 500lb Lift, 4,878 Hrs..............................................$66,500.

2010 VOLVO L90F WHEEL LOADER, STK #2313, Enclosed Cab, (Volvo V-ACT 6 Cyl.) Diesel, Block Heater, Air Filled Tires, Heat/Air, Aux. Hyd. Plumbed, Q/C, 102” Smooth Bkt., 172 HP, 15,098 Hrs ....................................................$59,500.

2009 CASE 1221E WHEEL LOADER, STK #2351, Enclosed Cab, (Cummins) Diesel, 4-Speed, Heat, Air, Ride Control, Emergency Steering, 335HP, 132” Bucket, 7,340 Hrs...................................................................................... $131,500.

2012 JOHN DEERE 644K WHEEL LOADER, STK #2410, Enclosed Cab, (John Deere) Diesel, Heat, Air, 4-Spd., Aux. Hydraulics, Positive Air Shut-Off, Q/C, Counter Weights, 232 HP, 117” Bucket, 9,152 Hrs...................................... $117,500.

FOR COMPLETE INVENTORY www.groundhogsales.com

Page 4

Supply Post · supplypost.com

STRAIGHT FORWARD AND TOUGH ARTICULATED DUMP TRUCKS THE ABILITY TO GO WHERE OTHERS CAN’T FOLLOW MODELS FROM 30 – 40 TON TIER 4 SCR = NO DPF FILTER TO SERVICE

October 2019

LATTICE CRAWLER CRANES: 80–300 US TONS ROUGH TERRAIN CRANES: 50.0–130 MT TELESCOPIC CRAWLER CRANES: 50–250 US TONS TELESCOPIC TRUCK CRANES: 40–110 US TONS (36.2–120 MT) ALL TERRAIN CRANES: 175, 210 AND 275 US TONS (185 & 250 MT)

2111 - 80 AVENUE NW EDMONTON, AB T6P 1N3 780-440-4010 www.essltd.com saleswest@essltd.com

EQUIPMENT SALES & SERVICE LIMITED

October 2019

Supply Post Â· Our Readers Are Your Buyers

Page 5

682 Okanagan Ave. E., Penticton, BC, Canada

1-866-344-6480

cturchak@brutusbodies.com

YOUR TRUCK BODY BUILDING SPECIALISTS BRUTUS BOXES

SLIP-IN BODIES

FLAT DECKS

TIRE BODIES

RV BODIES

VAN CONVERSIONS

HI-RAIL TRUCKS

LUBRICATION SKIDS

CRANE TRUCKS

ELECTRICAL UTILITY BODIES

AERIALS

FIRE AND RESCUE BODIES

WELDING BODIES

WORKSHOP BODIES

SERVICE BODIES

SERVICE DECKS

www.brutusbodies.com

Page 6

Supply Post · supplypost.com

RIVERSIDE EQUIPMENT RENTALS LOCALLY OWNED AND OPERATED

WE RENT

October 2019

ADVERTISERS INDEX Alberta Engine ................... 45 Destec .............................. 18 Jade Equipment .................. 1 Riverside Equipment ............ 6 Amix Group ....................... 41 Dolphin Mechanical ........... 41 K-Line Trailer ..................... 59 River Valley Contracting ..... 10 Arrow-West ........................ 12 Doosan ............................... 8 Langley Excavator Parts ..... 14 RLC Aggregate ................... 38 Banning Equipment ........... 42 Edmonton Trailer ............... 50 LNH Equipment ................. 46 Rollins .............................. 25 B & G Parts ....................... 36 Elrus ................................. 40 Lonetrack Equipment ......... 37 Royquip ............................ 43 Bison Iron ........................... 9 EnviroJim .......................... 21 LSW Wear Parts ................. 21 Saratoga Ventures ............. 18 Bob Dhillon Enterprises ..... 12 Equip. Sales & Serv....... 4, 10 Machinery Supply .............. 38 Sexsmith Used Farm Parts . 43 Bob’s Diesel ...................... 42 FBC Rentals ...................... 13 Magnum Attachments........ 20 Simpson & Sons ............... 14 BPT Parts .......................... 24 Foreman Equipment .......... 33 Marcel Equipment ............. 13 Skreenquip........................ 34 Brandt......................... 16, 17 ForesTech Equipment ........ 24 Morooka ........................... 23 Team Auctions................... 22 Brandt Truck Rigging .......... 51 Frontline Machinery ........... 36 Nor Mar............................... 5 Trak Tech........................... 13 Brandt Value Parts....... 15, 46 Gear Centre ....................... 36 Norstone Excavating .......... 22 Trans East Trailer ............... 55 Brikers ................................ 1 Groundhog Sales & Rentals . 3 Ocean Trailer ..................... 64 True North Equipment ........ 44 Brown International ........... 42 Groundworx ....................... 35 Pacific Rim Equipment......... 7 Tyalta ................................ 48 Brutus Truck Bodies ............. 5 Handlers Equipment .......... 20 Peerless ............................ 54 Unger Transport ................. 41 C. E. Heathcote ................. 46 Hikon Industries ................ 39 PM Industries .................... 52 United Earth Contractors ...... 2 Chieftain Equipment .... 37, 47 Hope Mechanical .............. 45 Premium Truck ......56, 57, 58 Vanderveldt Parts ................ 8 Coastal Pacific Equipment . 44 H & R Construction Parts ... 18 Prince George Truck ........... 43 Van-Ed Equipment ............. 11 Continental Equipment ...... 27 Inland Equipment .............. 19 P & R Truck Centre ............ 49 Wally’s Private Parts .......... 45

DOZERS

Crawler Sales .................... 22 Inland Group ..................... 32 Querel Trailers ................... 53 Westerra ........................... 25 Darby Mfg. ........................ 26 Interior Diesel .................... 39 Ramsey Co. ....................... 26 Wheeler Equipment ........... 15 Dendoff Springs ................ 10 InterQuip Rentals............... 11 Ritchie Bros....................... 27 Wyatt’s Used Equipment .... 44

NEXT DEADLINE: Friday, October 18, 2019

Scan for more info #105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5

www.supplypost.com

PHONE 604-607-5577 | TOLL FREE 1-800-663-4802

2014 CAT D6K LGP Articulating Trucks ■ Excavators with Hammers & Hoe Pacs Compactors ■ Dozers 2D / 3D TRIMBLE READY ■ Wheel Loaders ■ Swamp Pads

For Rentals – Call Daryl · 604-309-3980 daryl@riversideequipment.com For Sales – Call Ernie · 604-854-0583 ernie@riversideequipment.com 3112 Pratt St., Abbotsford, BC V2S 3C7 Phone 1-800-556-0557 • Fax 604-556-0559

www.riversideequipment.com

President ........................................... Jeff Watson

Marketing Administration ................... Sheryl Kaye

Account Manager ............................Jake Peterson

Art Director/Social Media ................... Linda Horn

Managing Partner, Finance ............ Debra Watson

Web & Graphic Designer ..................Lisa Schmale

CIRCULATION

Direct Mailed copies .............. 14,200 Newsstand copies .................... 2,200 Total distribution .................... 16,400 Please call our office for full details

Published Monthly - Printed in Canada Publications Mail Agreement No. 40070144 Reproduction of any material including photographs and/or advertisements in whole or in part is forbidden.

The Supply Post is a proud member of the following Trade Associations:

INTERIOR LOGGING ASSOCIATION

RETURN UNDELIVERABLE CANADIAN ADDRESSES TO CIRCULATION DEPT.: (Covers/Labels Only) No. 105, 26730 - 56th Avenue, Langley, BC V4W 3X5

October 2019

Supply Post Â· Our Readers Are Your Buyers

Page 7

Phone: 250-493-4545 1698 Dartmouth Rd, Penticton, BC V2A 4B8

Fax: 250-493-8819 AFTER HRS, Joe Hewer: 250-490-6795 AFTER HRS, Dave Garnett: 250-490-7976

RENT OR RENTAL PURCHASE AVAILABLE $CALL

2005 CAT D3G XL 6 WAY DOZER, CAB AIR.

YANMAR EXCAVATORS (2) NEW YANMAR SV08-1B CANOPY, RUBBER 14" BKT, 2'3"-2'9" WIDE ..........CALL (3) NEW YANMAR VIO17-A CANOPY, Q/CHANGE, 2 BKTS, HYD THUMB ............CALL 2018 YANMAR VIO25-6A RUBBER, CAB, HYD THUMB, 2 BKTS, 526 HRS......... CALL 2019 YANMAR VIO35-6A CAB AIR RUBBER, HYD THUMB, 2 BKTS, 407 HRS.... CALL 2019 YANMAR VIO35-6A CAB AIR STEEL, 2 BKTS HYD. THUMB, 382 HRS........CALL 2019 YANMAR VIO35-6A CAB AIR, RUBBER, HYD THUMB, 2 BKTS, 236HRS .... CALL NEW YANMAR VIO35-6A CAB AIR, RUBBER, ANGLE BLADE, 2 BKTS, HYD THUMB .... ......................................................................................................................... CALL 2019 YANMAR VIO35-6A RUBBER, CANOPY, HYD THUMB, 2 BKTS, 59HRS ...... CALL NEW YANMAR VIO35-6A RUBBER, CANOPY, HYD QUICK CHANGE ...................CALL (7) NEW YANMAR VIO35-6A CAB AIR, RUBBER, HYD Q/C, DIG BKT ................. CALL NEW YANMAR VIO35-6A CAB AIR, RUBBER, ANGLE BLADE, HYD Q/C, DIG BKT CALL 2019 YANMAR VIO50-6A STEEL, CAB AIR, ANGLE BLADE, 2 BKTS, HYD THUMB, 421HRS ........................................................................................................... CALL (3) NEW YANMAR VIO50-6A RUBBER, CAB AIR, HYD THUMB, DIG BKT, 7.6 HRS CALL 2019 YANMAR VIO50-6A RUBBER, CAB AIR, HYD THUMB, 2 BKTS, 308 HRS ... CALL NEW YANMAR VIO50-6A RUBBER, CAB AIR, HYD Q/C, DIG BKT ....................... CALL NEW YANMAR VIO50-6A CAB AIR, RUBBER TRACKS, HYD Q/C, DIG BKT ......... CALL NEW YANMAR VIO50-6A CAB AIR, STEEL TRACKS, HYD Q/C , DIG BKT............ CALL 2016 YANMAR VIO55-6A RUBBER, CAB AIR, HYD THUMB, 2 BKTS .................. CALL 2019 YANMAR VIO55-6A CAB AIR, RUBBER TRACKS, HYD THUMB, 2 BKTS ..... CALL (3) NEW YANMAR VIO55-6A CAB AIR, RUBBER TRACKS, HYD Q/C, DIG BKT .... CALL NEW YANMAR VIO55-6A CAB AIR, STEEL TRACKS, HYD Q/C , DIG BKT ............CALL 2018 YANMAR VIO80-1A CAB AIR, STEEL, HYD THUMB, AUX HYDS, 2 BKTS, 473 HRS ......................................................................................................................... CALL (2) NEW YANMAR VIO80-1A STEEL BOR, BLADE, HYD THUMB, 2 BKTS............CALL 2017 YANMAR SV100-2A CAB AIR, STEEL PADS, HYD THUMB, 2 BKTS, 886 HRS .... ..........................................................................................................................CALL (2) 2019 YANMAR SV100-2A STEEL, CAB AIR, HYD Q/C, HYD THUMB, 2 BKTS, 94HRS ......................................................................................................................... CALL (4) NEW YANMAR SV100-2A CAB AIR, STEEL, HYD Q/CHANGE, DIG BKT ......... CALL NEW YANMAR SV100-2A CAB AIR, RUBBER TRACKS, DIG BUCKET .................CALL

EXCAVATORS 2005 HITACHI ZX75US-A 18" PADS, AIR, BLADE, 3,285 HRS........................... CALL 2008 HITACHI ZX75US-3 18" PADS, AIR, Q/C BUCKET, 4,902 HRS................... CALL 2010 HITACHI ZX75US-3 18" BOR, A/C, BLADE, Q/C HYD THUMB, ONLY 1,359 HRS . ..........................................................................................................................CALL 2015 CAT 308E2 CR 18" BOR, AIR, BLADE, ONLY 102 HOURS.................... $96,900. 2015 CAT 308E2 CR 18" BOR, AIR, BLADE, PIPING, ONLY 812 HRS .................. CALL 2016 CAT 308E2 CR 18" BOR, AIR, BLADE, ONLY 700 HRS .............................. CALL 2016 KOMATSU PC78US-10 18" BOR, L.ARM, Q/C HYD THUMB, ONLY 558 HRS ...... ................................................................................................................. FOR RENT 2014 CAT 311FL RR 20" PADS, BOLT ON RUBBER, ONLY 1,262 HRS ............... CALL 2015 CAT 311FL RR 28" PADS, Q/C, HYD THUMB, ONLY 536 HRS, L/ARM ....... CALL 2010 CAT 312D 20" PADS, HYD Q/C & THUMB, L.ARM, 2,815 HRS .................. CALL 2011 HITACHI ZX120-3 20" PADS, AIR, ONLY 4,220 HRS ................................ CALL 2014 HITACHI ZX120-5B 20" PADS, AIR, Q/C, DIG BKT, ONLY 2,240 HRS......... CALL 2014 CAT 312E L 20" PADS, AIR, HYD Q/C...................................................... SOON 2018 CAT 312F 20" PADS, BLADE, Q/C HYD THUMB, ONLY 984 HRS........ FOR RENT 2012 HITACHI ZX130LC-5N 24" PADS, AIR, Q/C, HYD THUMB, ONLY 1,990 HRS ....... .................................................................................................................. $119,900. 2003 HITACHI ZX135US 20" PADS, AIR, HYD. PIPING, L/A, 7,074 HRS ........ $37,900. (4) 2005 HITACHI ZX135US 20" PADS, AIR, DIG BKT, 5,732-7,102 HRS........... CALL 2008 HITACHI ZX135US BLADE, 2 BKTS, HYD THUMB, CABGUARD, 6,468 HRS ........ ......................................................................................................................... CALL 2010 HITACHI ZX135US-3 20" PADS, AIR, BLADE, 7,231 HRS ......................... CALL 2010 HITACHI ZX135US-3 20" PADS, AIR BLADE, 6,557 HRS .......................... CALL 2011 HITACHI ZX135US-3 20" PADS, AIR, ONLY 4,333 HRS ............................ CALL 2011 HITACHI ZX135US-3 28" PADS, AIR, BLADE, 4,685 HRS ......................... CALL 2013 HITACHI ZX135US-3 28" PADS, AIR, L/A, ONLY 1,672 HRS ..................... CALL 2014 HITACHI ZX135US-5 24" PADS, AIR, 9'11" ARM, 2,589 HRS,Q/C, DIG BKT CALL 2014 HITACHI ZX135US-5 20" PADS, AIR, 9'11" ARM, 3,600 HRS ...................CALL (7) HITACHI ZX135US 2 BKTS Q/C, HYDRAULIC THUMB ........................... FOR RENT (3) HITACHI ZX135US-3 Q/C, HYD THUMB, 2 BKTS, DOZER BLADE.......... FOR RENT 2014 KOMATSU PC138US-10 28" PADS, AIR, HYD THUMB, 2 BUCKETS, 2,095 HRS . .................................................................................................................. $126,500. 2014 CAT 314E CR 20" PADS, Q/C, HYD THUMB, ONLY 2,150 HRS .......... $136,900. 2016 CAT 314E LCR 24" PADS BOR, Q/CHANGE HYD THUMB, ONLY 561 HRS ........... ................................................................................................................. FOR RENT 2016 HITACHI ZX180LC-6N 32" PADS, AIR, ONLY 2,602 HOURS .................... SOON 2013 CAT 316E L 28" PADS, AIR, Q/C HYD THUMB, 2,342 HRS ................ $159,900. 2011 CAT 319DL 32" PADS, AIR, Q/C 36" BUCKET, AUX HYDS ................... $49,900. 2010 CAT 320D RR 32" PADS, AIR, ONLY 4,800 HRS .......................................CALL 2015 CAT 320E RR 24" PADS, AIR, AUX PIPING, ONLY 1,777 HRS .................... CALL 2013 KOMATSU PC200-10 24" PADS, AIR, AUX PIPING, ONLY 2,876 HRS ........ CALL 2004 HITACHI ZX200LC 32" PADS, A/C, PIPING, ONLY 4,225 HRS ................... CALL 2011 HITACHI ZX200LC-3 32" PADS, AIR, Q/C, HYD THUMB, AUX HYD, 9,360 HRS, CATWALKS, CABGUARD ................................................................................... CALL

Authorized Dealer

$CALL

$44,900

1999 KOMATSU CD60R-1 STEEL TRACKS, 360 DEGREE DUMPER, 7,160 HRS.

2006 VOLVO A25D 23.5 TIRES, CAB AIR, TAILGATE, 8,000 HRS.

2012 HITACHI ZX210LC-3 28" PADS, AIR, Q/C, HYDRAULIC THUMB, 2,868 HRS ...... .................................................................................................................. $169,900. 2013 HITACHI ZX210LC-3 28" PADS, AIR, PIN GRABBER, HYD THUMB, 4,342 HRS .. .................................................................................................................. $119,900. 2014 HITACHI ZH200-5B 32" PADS, AIR, HYBRID MACHINE, ONLY 1,765 HRS . CALL 2014 HITACHI ZX210LC-5N 24" PADS, AIR, Q/C, HYD THUMB, ONLY 2,680 HRS ....... .................................................................................................................. $174,900. 2004 HITACHI ZX225US 24" PADS, AIR, Q/C, 36" DIG, 11,765 HRS ........... $33,900. 2006 HITACHI ZX225US-3 24" PADS, AIR, 7,596 HRS .....................................CALL 2011 HITACHI ZX225USR-3 24" PADS, AIR, ONLY 6,170 HRS .......................... CALL 2011 HITACHI ZX225USLC-3 32" PADS, AIR, Q/C, HYD THUMB, CABGUARD, 7,820 HRS ................................................................................................................. CALL 2012 DEERE 225D LC 32" PADS, AIR, HYD Q/C, 4,800 HRS, AUX HYDS.... $109,900. 2017 DEERE 245G LC 32" PADS, AIR, HYD THUMB,2 BKTS Q/C, 1,667 HRS ..... CALL 2018 KOMATSU PC200LC-8 32" PADS, A/C, Q/C, HYDRAULIC THUMB ..... FOR RENT NEW HITACHI ZX200LC-5 24" PADS, AIR COND, 2 BUCKETS & Q/C .......... FOR RENT 2018 HITACHI ZX200LC-5 24" PADS, A/C, Q/C, HYD THUMB, PLUMBED FOR HAMMER, GUARDED, 507 HRS ................................................................................. FOR RENT (6) DEERE 245G LC 2 BKTS Q/C, HYDRAULIC THUMB ............................... FOR RENT (6) DEERE 245G LC 2 BKTS Q/C, HYD THUMB, CABGUARD ....................... FOR RENT 2008 KOMATSU PC220LC-8 32" PADS, AIR, Q/C, HYD THUMB, 4,750 HRS .......CALL 2012 HITACHI ZX290LC-5N 32" PADS, AIR, HYD THUMB, Q/C, 6,689 HRS ....... CALL 2012 HITACHI ZX350LC-5N 32" PADS, AIR, Q/C, PRO LINK THUMB, ONLY 5,032 HRS ..........................................................................................................................CALL (3) DEERE 345G LC 32" PADS, AIR, HYD THUMB, Q/C .............................. FOR RENT NEW HITACHI ZX330LC-5 24" PADS, AIR, HYD THUMB, B/NEW ............... FOR RENT 2014 CAT 336E L QUICK CHANGE, 2 BUCKETS, ONLY 4,345 HRS ..................... CALL 2013 KOMATSU PC360LC-10 32" PADS, AIR, Q/C HYD THUMB, CAGUARD, 3,260 HRS ................................................................................................................. $239,000.

(2) 2014 BOXER 320 RUBBER TRACKS, AUX HYD, 34" BKT, 762 HRS......... $10,900. 2016 BOBCAT MT55 MINI LOADER, ONLY 216 HRS 44" BKT ................... FOR RENT 2012 BOBCAT T190 CANOPY, 1,915 HRS................................................. FOR RENT 2015 BOBCAT T590 CAB AIR, SJC CONTROLS, 428 HRS.......................... FOR RENT NEW BOBCAT T650 CAB AIR, STD CONTROLS,PWR BOBTACH, 74" BK ..... FOR RENT (2) BOBCAT S70 CAB, Q/C BKT, AUX HYD, 1,165 HRS ............................... FOR RENT 2013 BOBCAT S530 CAB, HYD Q/C, AUX HYD,2 SPEED, 869 HRS .............. FOR RENT (2) NEW BOBCAT S590 CAB AIR, STD CONTROLS, 68" BKT ..................... FOR RENT 2012 BOBCAT S630 CAB AIR 2 SPEED, HYD Q/C, 2,500 HRS ............................CALL 2013 BOBCAT S650 2 SPEED, HI FLOW, HAND/FOOT,A/C CAB, ONLY 1,505 HRS ....... .................................................................................................................. FOR RENT 2014 BOBCAT S650 CAB AIR, HAND/FOOT, ONLY 2,511 HRS............................ CALL 2012 BOBCAT S850 A/C CAB, 84" BKT, 2 SPEED, 2,548 HRS ...........................CALL

DOZERS 2014 KOMATSU D39PX-22 6 WAY, CAB AIR, ONLY 1,933 HRS, MS RIPPER(D5K SIZE) ................................................................................................................. FOR RENT 2015 CAT D6K2 XL 6 WAY, CAB AIR, MS RIPPER, ONLY 1,573 HRS ................... CALL 2005 CAT D7R XR SII DAT BLADE, A/C CAB, D/STEER, RIPPER, 8,068 HRS, NEW CAT UNDERCARRIAGE, OIL SAMPLES, WORK ORDERS ...................................... $244,900. 2011 KOMATSU D65WX-17 6 WAY DOZER, CAB AIR, MS RIPPER ..................... CALL 2014 KOMATSU D65PX-17 6 WAY DOZER, MR RIPPER, SWEEPS, ONLY 3,500 HRS .................................................................................................................. FOR RENT

LOADERS, SKID STEERS NEW YANMAR V4-7 CAB AIR, HYD Q/C, .85CU YD BKT/FORKS,144 HRS .......... CALL 2010 DEERE 310J 4X4,EXTENDAHOE, CAB, ONLY 2,539 HRS .......................... CALL 2013 CAT 930K 20.5R TIRES, FUSIOIN HYD COUPLER, 3.8 CU YD BKT, FORKS, ONLY 6,743 HRS ........................................................................................................ CALL 2006 KOMATSU WA250-5 20.5 TIRES, HYD COUPLER, BKT/FORKS, 12,375 HRS ...... ......................................................................................................................... CALL 2014 KOMATSU WA320-7 20.5R25 TIRES, HYD Q/C, R/C, RVC, 3,298 HRS ...... CALL (2) NEW KOMATSU WA250PZ-6 20.5R TIRES, HYD COUPLER, E/S,3 YD BKT/FORKS .................................................................................................................. FOR RENT NEW KOMATSU WA320PZ-6 20.5R TIRES, HYD COUPLER, E/S, 3.5YD BKT/FORKS .................................................................................................................. FOR RENT 2015 CAT 950K 23.5R TIRES, A/C, R/C, E/S, 4.32YD BKT, 2,820 HRS ....... FOR RENT

OCTOBER SPECIAL $36,900

GRADERS / COMPACTORS

1998 CAT 140H 17.5R TIRES, 14' MB, A/C CAB, MS RIPPER, 8,500 HRS ......... CALL NEW CORNIVER CT40S 40" SMOOTH DRUM, KUBOTA ENG, FF TIRES, 287 HRS ....... ................................................................................................................. FOR RENT NEW CORNIVER CT48S 48" SMOOTH DRUM, KUBOTA ENG, FF TIRES ..... FOR RENT 2008 VOLVO SD25D 41" DRUM DRIVE, CANOPY, 1,300 HRS ............................ CALL 2008 VOLVO SD45D 54" DRUM, CANOPY, ONLY 426 HRS ...............................CALL 2011 VOLVO SD45D TF 54" DRUM, PF SHELL KIT, 945 HRS .................... FOR RENT 2005 ING. RAND SD70D TF 66" SMOOTH DRUM/SHELL KIT, CANOPY ....... $38,900. 2006 ING. RAND SD70D TF 66" SMOOTH DRUM, 1,773 HRS,CANOPY ............ CALL 2012 VOLVO SD70D 66" DRUM, CAB AIR, ONLY 2,528 HRS ............................ CALL (2) VOLVO SD75 66" SHELL KIT, CAB AIR.................................................. FOR RENT 2014 SAKAI SV540D 84" SMOOTH DRUM, CANOPY, ONLY 470 HRS .......... $87,900. (2) SAKAI SV540TF 84" SMOOTH DRUM/PADFOOT SHELL KIT, CAB AIR .. FOR RENT

DUMP TRUCKS

2013 CAT CT660L CAT C15 550HP, 18 SPD, AIR RIDE, 20K FRONT 46K REARS, 220" WB, ALUM WHEELS, K LINE 16'6" BOX, HL GATE, CERT .................................... CALL (3) CANYCOM SC75PD RUBBER, 1,655LB PAYLOAD, 35" WIDE, 180 DEGREE DUMP .................................................................................................................. FOR RENT (3) CANYCOM S25A RUBBER, CANOPY, 180 DEGREE SWIVEL DUMP........ FOR RENT NEW YANMAR C30R-3 CANOPY C/W SWIVEL DUMP ....................................... CALL 2018 YANMAR C50R RUBBER, CAB, SWIVEL DUMP, 8,300LBS MAX CAPACITY ......... .................................................................................................................. FOR RENT 2002 KOMATSU CD110R-1 RUBBER 360 DEGREE SWING DUMPER, 4,100 HRS CALL 2005 CAT 730 23.5 TIRES, TAILGATE, ONLY 5,674 ORIGINAL HRS ............ $219,900. 2011 CAT 730 23.5R25 TIRES, TAILGATE, ONLY 3,200 HRS ...................... FOR RENT 2012 VOLVO A30F 23.5 TIRES, RV CAMERA, EMERG STEER, 4,141 HRS .. FOR RENT 2012 VOLVO A30F 750/65R25 TIRES, RVC, HEATED, ONLY 5,360 HRS ............. CALL (3) 2019 KOMATSU HM300-5 23.5R TIRES, HTD BOX, BRAND NEW ........ FOR RENT 2007 CAT 735 26.5R25 TIRES, HEATED BED, 13,110 HRS.......................... $69,900. 2014 VOLVO A40F 875/65R29 TIRES, TAILGATE, EHB, ONLY 7,527 HRS .... $214,900.

LIFTS & LIFT TRUCKS 2013 DOOSAN G25E5 4,600LB FORKLIFT, DUAL FUEL, SS, 3 STAGE MAST ...... CALL 2018 GENIE GTH-5519 TELESCOPIC FORKLIFT, CAB, ROTATING CARRIAGE .............. .................................................................................................................. FOR RENT 2008 JLG 12SP ELECTRIC PERSONAL LIFT, 12' BOOM, 21 HRS .................. $ 3,990. (2) NEW GENIE GS1930 19' ELECTRIC SCISSORLIFT ............................... FOR RENT 2010 GENIE GS2632 26' ELECTRIC SCISSORLIFT, REMOTE, PWR TO PLATFORM, 229 HRS ........................................................................................................... $14,900. 2018 GENIE GS3369 RT 4X4, KUBOTA DIESEL, OUTRIGGERS, B/NEW ...... FOR RENT 2014 GENIE Z34/22 4X4, KUBOTA, 34' LIFT, 4' JIB .................................. FOR RENT 2011 GENIE Z45/25J 4X4, DIESEL, 5' JIB, FF TIRES, 3,364 HRS ................ $39,900. (3) 2012 GENIE Z45/25J 4X4, DIESEL, JIB,DIESEL................................... FOR RENT 2014 JLG 450AJ 4X4, DUAL FUEL, 1,702 HRS ......................................... FOR RENT 2005 JLG 600AJ 4WD, DUAL FUEL, 4,008 HRS, GENERATOR, CERTIFIED . FOR RENT 2013 JLG 600AJ 4X4, DIESEL, PWR TO PLATFORM,FFT, 3,200 HRS ......... FOR RENT 2014 GENIE Z60/34 4X4, ART BOOM LIFT, DEUTZ, ONLY 1,672 HRS ........ FOR RENT

MISCELLANEOUS

2002 HITACHI ZX135US 20" PADS, QUICK CHANGE, DIG BKT, 13,713 HRS

2014 WINNEBAGO 31' VISTA 6.8l GAS, 23,655 MILES, 2 SLIDES, GENERATOR MINT ................................................................................................................... $87,500. 2006 JOHN DEERE 3320 33 HP, 4X4, HYDRO TRANS, TURF TIRES, REAR PTO, MID MOWER, 300CX LOADER, 3 PT HITCH, 764 HRS ......................................... $27,500. 2000 FORD F650 CUMMINS PWR, 2,000 GAL, 1,9,699 MILES, 6 SPEED, A/C, PTO, FFS-RR,HOSE REEL ....................................................................................... $32,900. 2007 FORD F750 2,000 GALLON WATER TRUCK(VALEW) FRONT,REAR, SIDE SPRAY, REAR HOSE REEL, CUMMINS, AIR BRAKES, 18,693 MILES ................................ CALL 2008 FREIGHTLINER M2 220HP CUMMINS, 5 SPEED, 3" PUMP, FRS SPRAY, UNUSED 2,000 GALLON WATER TANK .......................................................... CALL

www.pacificrimequipment.com | sales@prequip.com

Page 8

Supply Post · supplypost.com

October 2019

SHEARFORCE

Shearforce Picks Up Where Terrafirma Left Off In Alberta VANDERVELDT EQUIPMENT PARTS LTD.

Providing New OEM Components with Huge Price Savings!

250-951-2082

We offer a large in-house selection of new OEM components for:  Hitachi  Deere  Case  Link-Belt  CAT  Kobelco

www. VeldtParts .com

ShearForce Equipment and key former employees of TerraFirma Equipment has announced that they are joining forces in northern Alberta to provide sales, rentals, parts, and repair and maintenance services for hydraulic excavator attachments. They are not only expanding their regional support capacity across northern Alberta, but also the product lines they can service and repair. The news comes following the announcement of the closure of Terrafirma Equipment Sales and Rentals Inc. in Edmonton, a long-standing equipment dealer with more than 50 years of dedication and experience in servicing their rental and sales customers

across northern Alberta. With the opening of their new sales and service center in Airdrie, Alberta, this past July, the move cements ShearForce as Western Canada’s hydraulic attachment specialists, now offering local on-theground support across BC and Alberta. Three familiar faces from Terrafirma have joined the ShearForce team in northern Alberta to ensure Terrafirma’s current customers are sufficiently supported and their equipment needs are met now and into the future. Dave Rock is continuing on in his role as operations manager for a brand-new facility just outside of Edmonton and will focus on meeting

equipment needs in northern Alberta, northeastern BC, northern Saskatchewan and beyond. Heavyduty technician Justin Rasmussen will continue to provide top notch technical support across the northern region. Jessica Hansen will carry on in her role as product support and office coordinator. ShearForce has secured a new facility in Nisku and will offer in-shop services including attachment rebuilds and machine hydraulic setups. Dave, Justin, and Jessica will also be working closely with the team at ShearForce’s Airdrie facility to ensure parts and services are readily available to customers across the province. For the management team at ShearForce Equipment, timing was essential to making the move into northern Alberta. Said president Brad Dewit, “We were focused on building our presence in central Alberta with the new facility in Airdrie this summer, and when the opportunity arose, we knew we had to jump at the chance to enhance our service offering to the entire province. We feel fortunate to have the Continued on page 10

Authorized Doosan Dealers

alberta

Brown’s Industrial Sales 780-875-2339

dealer.doosanequipment.com/Lloydminster

DOOSAN of the Peace 780-538-0791

dealer.doosanequipment.com/Grande-Prairie

british Columbia

More power to you.

DOOSAN of the Peace 250-785-1197

dealer.doosanequipment.com/Fort-St.-John

Westerra Equipment 604-850-7313

dealer.doosanequipment.com/Abbotsford

250-314-3600

dealer.doosanequipment.com/Kamloops

250-716-0443

dealer.doosanequipment.com/Nanaimo

Williams Machinery 250-563-0181

dealer.doosanequipment.com/Prince-George

manitoba

AGCON Equipment 204-255-4772

dealer.doosanequipment.com/Springfield-MB

saskatchewan Bobcat of Regina, Ltd. 306-347-7600

dealer.doosanequipment.com/Regina

Earthworks Equipment Corporation 306-931-7880 dealer.doosanequipment.com/Saskatoon

MEET DEADLINES HEAD-ON. CONTACT YOUR LOCAL DEALER TODAY.

Doosan® and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. © 2019 Doosan Infracore North America, LLC. All rights reserved.

doosanequipment.com

October 2019

Supply Post · Our Readers Are Your Buyers

Page 9

CRUSHERS • SCREENERS • TROMMELS • STACKERS • WASHPLANTS

CALL 604-813-2424 | info@bisoniron.com | British Columbia & Alaska

2019 McCLOSKEY J50, 350 HP, 50” x 29” Jaw with Reversible Hydrostatic Drive .........................................................POR

2019 McCLOSKEY J40, CAT Engine, 24”x40” Tracked Jaw, Side Conveyor, Magnet, Hopper Extensions ............POR

2019 McCLOSKEY J45, 350 HP, CAT Engine, 45”x 27”Jaw, 42” Extended Conveyor .........................................POR

2015 POWERSCREEN 1400 CHIEFTAIN, 2019 McCLOSKEY R70, 130 HP, CAT 670 hrs, Cat C4.4 Eng., 2-deck, 11x5, Track Engine, 9’ x 4’ Screenbox, Hopper Mounted, Remote Tipping Grid...$229,000 Extensions, Easy to transport ...$250,000

2016 KEESTRACK C4 EXPLORER 1500, 2,100 Hrs., Duetz Engine, Two Deck Screen, Exc Condition .....$175,000

2019 McCLOSKEY S190, 130 HP, 2Deck 20’ x 5’ Screening Plant, Screenbox Top Deck 5’ x 4’ Side Tension ..........POR

2019 McCLOSKEY S130, 14’X5’ Double Deck High Energy Screening Plant 100 HP (75 KW) Diesel Cat Engine........POR

McCLOSKEY ST100T, 90 HP, Kubota Eng, Remote Control Tracks, Hyd. Raise, Lower & Fold, 600tph 100’ x 36” ......POR

2017 EZYSTAK W5030, 50’ Radial Hydraulic Conveyor (3 in-stock) ..$29,000

2015 PORTAFILL 2000CT, 374 Hrs., Duetz Engine, Excellent - Like New Condition ..................................$100,000

2016 McCLOSKEY 516RE, 100 HP, CAT Engine, Radial Fines .......................POR

McCLOSKEY ST80, Kubota Eng., Diesel Hyd. Radial Conveyor, Hopper, Lights & Brakes, Choice of 8 units from $65,000

2007 TEREX PEGSON XA400, 6,700 Hrs., CAT C9, Hyd. Adjust. Magnet, Side Belt, New Bearings and Shaft..........POR

2006 TEREX PEGSON 1180, PREMIERTRAK 3,950 Hrs., 32”x44” Heavy Duty Quarry Jaw, CAT C12 Engine ..........POR

2019 McCLOSKEY R155, CAT 130HP Engine, 16’x5’ High Energy Screen Box, Hopper Extensions ..........................POR

2019 McCLOSKEY S190, Cat130 HP, 3 Deck 20’ X 5’ Screening Plant, 15’ Feeding Hopper, Full Length Grid .................$POR

2018 McCLOSKEY ST80, Diesel Hydraulic Conveyor, CAT or Kubota Engine, 80’x36” ........................... POR

2019 IMcCLOSKEY R230, Cat 225 HP, Top Deck, 20’ x 6’, bottom Deck 18’ x 5’ ... ......................................................... $POR

2019 McCLOSKEY C44, CAT Engine, 44” Cone Antispin System .....................POR

www.bisoniron.com | 604-813-2424 | 780-819-7433

Page 10

Supply Post · supplypost.com

Continued from page 8

opportunity to prove that we are up to the challenge of supporting our collective customers’ needs with our enhanced sales and support capabilities across all the regions we serve.”

Dave Rock, operations manager for the new Nisku facility, joins ShearForce after functioning in the same role at Terrafirma for the past two years. Dave will lead the setup of the new branch, as well

2013 Caterpillar D5K LGP, 1,817 Hrs� $160,000

as coordinate sales and rentals with the support of the ShearForce team at the Airdrie office. As Dave noted, “We’re looking forward to be able to carry on with offering solid support for our long-standing

2014 Caterpillar 324EL, 2,783 Hrs� $260,000

October 2019

Terrafirma customers right here in Nisku. We’re confident we already have the space, people, and resources to offer more immediate solutions to our customers with specialized local support.”

2013 Caterpillar D6N LGP, 3,752 Hrs� $270,000

ShearForce will continue to back all of Terrafirma’s attachments for excavators, backhoes, and skid steers with parts, service, and technical support, including Allied hammers and compactors, HKS actuators, Epiroc (Atlas Copco) hammers, compactors and demolition attachments, Rotar shears, screening buckets, pulverizers, and demo grabs, Vibra-Ram shears and pulverizers, and Antraquip saws and drum cutters. They will also have a small fleet of demolition excavators available for

rent in northern Alberta and beyond, along with their full line-up of hydraulic attachments, including hammers, hydraulic rippers, demolition pulverizers, brush cutters, mobile scrap shears, and more. The ShearForce team is poised and ready to meet the needs of Terrafirma’s customers now and into the future. Visit shearforce.ca for updates, and watch for a new facility announcement in the coming weeks. b Source: ShearForce

EXCAVATORS / DOZERS / LOADERS: 2014 Caterpillar 324EL, 2,783 Hrs �� $260,000 2012 Caterpillar 324EL, 3,918 Hrs �� $235,000 2013 Caterpillar D5K LGP, 1,817 Hrs �� $160,000 2013 Caterpillar D6N LGP, 3,752 Hrs� �� $270,000

TRUCKS / TRAILERS / MISC:

Coil and Leaf Springs Since 1906

(3) 2013-2015 Doepker Impact End Dump with Liners �� $65,000-$70,000 2004 K-Line 55 Ton Lowbed Trailer �� $55,000 2007 Peerless Jeep Trailer �� $35,000 2014 Ford F-350 XLT Super Duty, C/w 450L Fuel Tank/Toolbox Combo ��$29,900 2008 Jeep Rubicon, 73,827 km ��$19,500 (4) New Michelin Tires, 23�5 x R25 x HA2 �� $4,500 ea� (6) New Michelin Tires, 75 x 65 x R25 XAD �� $7,250 ea� 100 Tonne Scale, 80’ x 11’ w/8’ x 12’ Shack, Digital Readout & Printer ��$65,000

MECHANICAL COIL SPRINGS Compression, Extension and Torsion LEAF SPRINGS Pickup Trucks, Highway Trucks & Trailers Off Highway Truck Springs U-Bolts, Suspension Parts, Air-Bags

RIVER VALLEY CONTRACTORS

800-661-4205 | Sales@Dendoff.com www.Dendoff.com | Surrey, BC

1-844-288-9337 | info@RiverValleyContractors.com

QUALITY AFTERMARKET PARTS FOR ALL MAKES ALL MODELS

HYDRAULIC CYLINDER (STICK)

YOUR UNDERCARRIAGE EXPERTS!

HYDRAULIC CYLINDER (BOOM) BOOM

STICK

CAB

HYDRAULIC CYLINDER (BUCKET)

ENGINE (DYNOMOMETER TESTED)

MAIN CONTROL VALVE ATTACHMENTS MAIN HYDRAULIC PUMP

LINKAGE

SWING DRIVE

SWING RING TRAVEL MOTOR SPROCKET

BUCKET

FINAL DRIVE

YOUR WEAR PARTS EXPERTS!

CAB BODY FRONT TRACK IDLER SPRING

BOTTOM ROLLERS TRACK GROUPS

www.essltd.com

SINCE 1946

CONNECT WITH US

October 2019

Supply Post · Our Readers Are Your Buyers

PIXABAY.COM

Is Employee Engagement Killing Your Customer Service?

When it comes to customer service, organizations often adhere to the misconception that customer service is a department, and serving a customer’s needs extends only as far as what they paid for. Brian Gareau, a speaker and consultant specializing in solutions to engage employees and accelerate high performance, rejects these claims. “Customer service is not a department,” says Gareau. “It’s an attitude, and it involves the entire organization.” In order to have good customer service, an organization must have engaged and

dedicated employees. After all, how can customers love an organization if the employees don’t love it first? From defining employee engagement to discussing factors that affect customer service, Gareau has several strategies to take your customer service from ho-hum to home run. The Truth About Customer Service Customer service requires a proactive approach and continuous improvement, especially in the digital age. While a bad offering can be fixed with good customer service, bad customer service can severely impact

your bottom line. Here are just a few surprising statistics: • 70 percent of buying experiences are based on how the customer feels they are being treated. • Acquiring a new customer compared to retaining an existing one costs 6 to 7 times as much. • Probability of selling to any new customers is 5 to 20 percent compared to 60 to 70 percent to an existing customer. Maintaining customers, and doing so with excellent customer service, will not only save your organization money, but will create loyal customers and generate positive press while doing so. Factors Affecting Customer Service If superb customer service is the goal, an organization must first have excellent work culture and employee engagement so they can then service their customers effectively. “Organizations with effective workplace cultures outperform their competitors by 20 to 30 percent,” says Gareau. “And even more astonishing, engaged employees generate more

Page 11

30418 Simpson Road, Abbotsford, BC

(604) 203-6000

james@interquiprentals.com

RENTAL EQUIPMENT

2015 Wacker Neuson 3001 Site Dumper c/w swivel skip. 3,000 kg payload, 25km/hr. (SALE OR RENTAL)

2016 Takeuchi TB260 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

2016 Komatsu PC138US c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

2014 Hyundai R210LC-9 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

2012 Komatsu PC210-8 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

Wacker Neuson DW60 Site Dumper, AWD Front or swivel tip, 6,000kg payload. Optional cab.(SALE OR RENTAL)

New Holland D85WT Dozer c/w ripper and 6 way blade (FOR RENTAL ONLY)

JCB 3TS-8T Teleskid c/w bucket & forks (FOR RENTAL ONLY)

Continued on page 12

ATTACHMENTS & MORE

MORE INVENTORY ARRIVING SOON. • Site Dumpers • Skid Steers • Much more!

Own or Rent

• Hammers • Crushers Crusher Buckets • Grapples • Compactors • Blowers & Dust Suppression

1-877-255-9293 · 604-888-9020 · www.vanedequipment.com

Check out our website for all of our available rentals

Call for availability 604-203-6000

interquiprentals.com

Page 12 Continued from page 11

than 40 percent revenue than disengaged ones.” It’s easy to see that every employee in the organization is either enhancing or harming your customer service, not just the ones in the customer

Supply Post · supplypost.com service department. In order to attain an efficient workplace culture and employee engagement, organizations have to work on three things: • Personal accountability • Dealing with differences

$449,000

2018 JOHN DEERE 2656G-LC LOG LOADER, 1,280 Hours, 3-yr./5,000 Hour Warranty Remaining, Full Load Package, Esbar Engine Heater, Hydraulic Reverse Fan.

of opinion • Empowering employees Personal Accountability What happens when mistakes are made? What happens when goals or deadlines are missed? These are questions you

$359,000

have to ask yourself upon observing employee incidents. Gareau says some things you’ll see when people are actively avoiding accountability are missing deadlines, excuses, avoid-

2015 TIGERCAT 635E SKIDDER, 5,300 Hours, Webasco Engine & Hydraulic Heater, 2 Sets of Tracks & Spare Tire.

2019 TIGERCAT LX830D FELLER BUNCHER, 580 Hours, 3-year/5,000 Hour Warranty Remaining, fully Loaded with 26” Cutting Head & Telematics ...........................................................................................................................................................$682,000 2014 LINK BELT 240 LOG LOADER, 9,000 Hours, 1,000 Hours on New Undercarriage, Webasco Engine & Hydraulic & Cab Heater, New Seat, Many Extra Lights ...............................................................................................................................$229,000 2014 KOMATSU D65PX-17 CRAWLER DOZER, Mint Shape, 3,160 Hours, PAT Blade, Topcon Ready, New Rails & Pads (Warranty Issue) ..............................................................................................................................................................................$244,000 2008 HITACHI 210 LOG LOADER, 10,500 Hours, 1,000 Hours on New Undercarriage, Heated Seat, A/C, Esbar Engine & Hydraulic Heater ..............................................................................................................................................................$139,000 MADILL 071 YARDER, 4 Guys, Allison HT740 4-Speed with Reverse, 6V92TA, C/W Radios & Rigging ............................$139,000 2012 KOMATSU PC290 EXCAVATOR, 9,280 Hours, 2 Buckets, Engine Heater ...................................................................$94,000

Call Bob: 1-833-994-1194 or Bobdhillon654@gmail.com

Allu is the world market leader in Screener Crusher Buckets. New and Used Buckets Sales and Rentals Replacement Parts in stock

Yanmar Group Acquires ASV Holdings Inc.

Continued on page 13

$329,000

2015 TIGERCAT 855C PROCESSOR w/ 622C HEAD, 6,500 Hours, Mint Condition, Webasco Engine & Hydraulic Heater.

October 2019

Yanmar Group has completed its acquisition of compact equipment manufacturer ASV Holdings Inc. (“ASV”), a designer and manufacturer of renowned compact tracked loaders (“CTLs”) and skid-steer loaders (“SSLs”). The announcement is the final step in the acquisition, following on from the June disclosure of a definitive agreement to acquire the company through the mechanism of a statutory merger. Yanmar has acquired 100% of ASV’s outstanding shares of common stock for total consideration of $70.70 Million, or $7.05 per share. ASV’s independent dealer network throughout North America, Australia, and New Zealand will join Yanmar’s existing global construction equipment operations. The company also sells OEM equipment and af-

PROUD DEALER OF:

ATTACHMENTS & EQUIPMENT SALES AND RENTALS NEW & USED PARTS CALL US TODAY! 1-844-802-4490

www.arrowwest.com

termarket parts, and owns and operates a 238,000 square-foot production facility in Grand Rapids, MN. “We expect ASV to realize significant, channel and product synergies after joining the Yanmar Group,” stated Mr. Giuliano Parodi, Executive Officer of Yanmar Holdings. “In addition, the ASV Grand Rapids facility will continue as a center of excellence for compact tracked loaders and skid steer loaders, while benefiting from the global capacity and resources of the Yanmar Group.” The acquisition strengthens the Yanmar’s range of compact equipment products allowing it to offer full dig, load, carry solutions on the worksite and contribute to Yanmar’s prospects for growth in North America and globally. b Source: Yanmar

FMS attachments meet or exceed the competition in quality, ﬁt and ﬁnish with a one year warranty on materials and workmanship.

October 2019

Supply Post · Our Readers Are Your Buyers

Continued from page 12

ing initiatives, lacking interest and more. To combat these accountability issues, it is important that all employees hold each other accountable, while also being cohesive and trusting of one another. Building these relationships will encourage people to work for each other rather than working for themselves. This will, in turn, enhance workplace culture and collaboration. Dealing With Differences Of Opinion A difference of opinion

is not always a negative circumstance. It can be good if it builds trust or increases clarity. However, if it creates morale issue or diverts energy from higher priorities, it can be a major problem. Some causes of these issues are disagreements on methods, objectives or communication styles. Gareau says that these issues can be resolved with four simple guidelines: • Outline the values of the company • Align them to the business plan • Confirm that these objec-

tives adhere to organization’s goals • Give and accept feedback Empowering Employees When we hire someone, we are trusting that person to do a job to the best of their ability and they are trusting that their goals align with that of the organization. If we do not trust an employee to represent the company well or to give excellent customer service, why were they hired in the first place? This is a key issue in the workplace, Gareau

EXCAVATOR TRADES WILL BE CONSIDERED

said, and it needs to be only as good as the emget there. addressed. Here are a few • Get to know people: ployees. The more emways you can help empowMake time to engage ployees enjoy working for er employees to do their with each employee 1:1 an organization, the more best work: so they feel comfortable compelled they will be • Communicate a clear sharing their ideas and to exceptionally serve its vision and mission: Excustomers. After all, when concerns. plain why their job is • Show your appreciation: it comes to customer sercritical to the organiza“Thanks” goes a long vice, it’s not the “knowtion, not just how to do way for a job well done, how” that matters, it’s the it. don’t be afraid to say it “know-why”. b • Demonstrate trust: Demore often. fine the goal, not how to Customer service is Source: ConExpo • SPECIALIZING IN NEW & USED UNDERCARRIAGE • PARTS • EQUIPMENT RENTALS & REPAIRS EQUIPMENT LTD. • TRACK PRESS FACILITY • IDLER REBUILDING

594 Chilcotin Road, Kamloops, BC V2H 1G5

EQUIPMENT FOR RENT OR SALE

• • • • • • •

• • • •

2018 Komatsu PC200LC-8, 3 bkts, Q/C, thumb, cabguard, catwalk, new mach. 2015 Komatsu PC170LC-10, 3 bkts, thumb, cabguard, like new cond., 1,400 hrs. 2014 Komatsu PC290LC-10, 2 bkts, thumb, exc. cond, 4,800 hrs. 2012 Komatsu PC200LC-8, 3 bkts, thumb, cabguard, Q/C, exc. cond., 2,800 hrs. 2014 Komatsu PC88MR-8, 3 bkts, wrist-bkt., hyd. thumb, swing boom, 2,400 hrs. 2016 Hitachi ZX85 USB-5, 3 bkts, hyd. thumb, swing boom and blade, exc. cond. 2012 Komatsu D65EX-17, sigma blade, ripper & forestry guard., new U/C, plumbed for GPS, exc. cond. Dressta TD10M Crawler, 6 way, blade, cab, A/C, 850 hrs, like new cond. Dynapac CA362D, 84” smooth drum, cab, A/C, 2,500 hrs, exc. cond. 2012 Hamm 3412, 84” smoothdrum w/ shell kit, cab, A/C, exc. cond. 2010 Hamm 3307, 66” smooth drum w/shell kit, cab, A/C, exc. cond. FOR RENT

2008 40’ ITASCA HORIZON, ISL 425 HP Cummins Allis, 2 Slides, Options+, 53,300 miles, Installed Extras Include; Beltronic Radar Detector, 100kW Solar Panel, EMS-NW50C Electrical Protection System, Motosat Satellite Dish, Eagle RE-1 Dish Controller (Requires Shaw Receiver), Pressure Pro 10 Wheel Tire Monitor, RVI Brake 2 Auxiliary braking system, Demco Dominator Tow bar and Road Master Rock Shield, New Michelin Tires all around.............................................................$149,900 Can also be purchased with 2016 CHEVY COLORADO Z71 4WD Extended Cab Pick-up, Demco Denominator Base Plate, Tow Wiring, Add an additional...................................................... $33,500.

Contact: Ken 604-290-8209

Page 13

2014 Komatsu WA270-7, wheel loader, 3 yd. bkt. forks/Pipe grapple, exc. cond.

RENT NOW

2017 Komatsu PC350LC-8, 3 bkts, thumb, 1,700 hrs, new cond.

HUGE INVENTORY OF USED UNDERCARRIAGE • • • • • • • • •

Cat 330 TGA’s 28”, 2 bar pads on new rails. Cat 330 33.5” 3 bar shoes, full set, 75% remaining. Komatsu D65EX15-17 TGA’s 24” (Plus System) ZX350/PC360 New Take-off Track Groups, 32” 3 bar Deere 2154 TGA’s 28” 2 bar on new rails ZX200LC/PC200LC TGA, 28” 2 Bar on new rails ZX350, ZX450 bottom rollers. T.Cat 870 / Deere, 959 track spring assy. rebuilt. ZX200 (Rebuilt) Track Adj. Assembly.

Phone: (250) 374-5054

Email: traktech@telus.net

EVES: Regan Zurowski (250) 371-1444 • Chad Zurowski (250)371-7535

For photos and more listings visit www.traktech.ca

PIPELAYER SALES - RENTALS - RENTAL PURCHASE Contact Mark or John: 1-800-265-5747 | sales@marcelequipment.com Ask About our Warranty!

CAT D7E LGP (2012) – 4858 Hours Choice of A blade or Straight with Tilt, Winch/Ripper or Drawbar Available, 36” Pads, 85% Remaining.

CAT 814F (2008) – 6869 Hours 29.5R25 Tires, U Blade, Very Clean Low Hour Unit. $235,000

Volvo A40G (2014) 6754 Hours, Box Heater, Tailgate available, New Tires to be Installed, Rear Camera. Very Straight Truck.

JOHN DEERE 700K/J LGP (2006-2012) 1028 – 6234 Hours, 40,000 LB. Lift, 24 Foot Booms, 30” Pads, Some with Blades, 17 Units Available.

CAT D8T LGP (2016) – 2 Units Available 7625-8195 Hours, CAT Dealer Maintained Since New, Cab Precleaners, AC, 38” Pads, CAT SU Blade with Tilt, Ripper Valve, Winch/Ripper or Drawbar Available.

KOMATSU WA500-8 (2018) 2540 Hours, Komatsu Warranty, Michelin tires, 6.75 CY Spade Bucket with Teeth, Auto-grease, Very Clean and Work Ready.

CAT 772 (2013) – 2 Units Available 4755-5135 Hours, 51 Ton, Block Heater, Tailgates, Heated Boxes, Autogrease, Cold Weather Arrangements, NEW Front Tires Installed.

CAT 980M (2014) 3552 Hours-1228 Idle Hours, 7.5 CY Bucket, CAT Dealer Maintained, Worked in Very Light Application.

View Complete Inventory at www.marcelequipment.com

Page 14

Supply Post · supplypost.com

1-844-995-0736 www.supplypost.com/simpson

EQUIPMENT FOR SALE

PRICED TO MOVE!

2007 CAT D9T, 10,533 HRS-3438 IDLE HRS, EXCELLENT CONDITION THROUGHOUT. NEW PRICE ............................ $425,000 USD

1 OF 2 2011 CAT 966K,10,906/11,016 HRS,1 OWNER FROM A GREAT HOME, MUST SEE. ............................................CALL FOR PRICE

2016 CAT D6T XW VP, 6,029 HRS, ACCU GRADE READY, WARRANTY, EXC U/C. JUST REDUCED...................... $209,000 USD

2 X 2013 CAT 966K, 7,631 & 8,772 HRS, 5.25YD GP QB BKT W/TEETH, FUSION COUPLER .............................CALL FOR PRICE

2017 CAT 320FL, ONLY 2 LEFT, HYD Q/C BKT, SHEAR PIPING, AUX HYD, MUST SEE. JUST REDUCED............$169,500 EACH USD

2016 HITACHI ZX250 LC-6, 1,756 HRS, NEW Q/C DIGGING BKT, AUX HYD, A/C, EXC COND. ............................................... $129,900 USD

2012 CAT 316EL, 4,190 HRS, TIER 4I CAT THUMB, AUX HYD, VERY GOOD CONDITION. JUST REDUCED........................ $97,500 USD

1980 CAT 16G, 6 PUSHBLOCK 16’MB W/SS TIP ACCUMULATORS, A/C CAB, RIPPER. JUST REDUCED........................ $45,500 USD

2015 CAT 950M 9,020 HRS - 3,500 IDLE HRS, C/W FUSION COUPLER, 4.5 CU YD BKT & FORKS. JUST REDUCED ......... $134,000 USD

2 X 2004 CAT 825G II, VERY TIDY UNITS. JUST REDUCED.............$178,500 EACH USD

LOCAL SERVICE | GLOBAL REACH

October 2019

CLAAS Of America Rolls Out New Products CLAAS of America rolled out seven new product innovations across its long line of farm equipment. They include the next-generation LEXION 8000-7000 series combine harvester, JAGUAR 900800 series forage harvesters with available TERRA TRAC drive systems and ORBIS row-independent headers, new AXION 900800 series tractors, DISCO 4000 TRC mower, ROLLANT 520 round baler and VOLTO 55 TH tedder. “This summer, we’re proud to feature the largest number of new product introductions in one year in the history of CLAAS of North America, all designed to help drive greater productivity, higher throughput, better harvest efficiency and increased ease of operation,” says Eric Raby, CLAAS of America President and GM – Sales. “Each product features significant engineering advancements that deliver on the superior productivity that today’s ag business demands, offering the best return on investment and allowing the operator to get more done in less time.” Next-Generation LEXION Combine The all-new LEXION 8000-7000 series combine harvester is more powerful and features the highest capacity in the industry, designed with a host of features to streamline harvest and save time and money. It features exceptional capacity to harvest all types of crops in all types of conditions, covering more acres per hour and achieving even better grain quality. With the APS SYNFLOW HYBRID system, the new LEXION delivers 10 percent more capacity than the previous series. Grain handling is also improved, with unloading speeds as fast as 5.1 bushels per second and the industry’s largest grain tank that features a 510-bushel capacity. Operators can cover significantly more ground with a 25-mph transport speed with both wheeled and TERRA TRAC models. In addition, the operator also saves time with crop

changeover capabilities, straight from the cab, with just the touch of a button. JAGUAR 900-800 Series and ORBIS Header The all-new JAGUAR 900 series, 800 series, and TERRA TRAC forage harvesters feature even higher throughput, chop quality, fuel efficiency and timesaving features. The JAG-

UAR line sets the standard for reliability, and improvements to the design of the new series raises the bar on machine longevity. A 30% stronger feedroll cabinet allows for smoother crop flow, more consistent chop quality and the highest reliability on the market. The JAGUAR 990 is equipped with up to 925 horsepower and the new JAGUAR 970 features an Inline-6 engine with 790 horsepower. The JAGUAR 990 and 960 are available with a TERRA TRAC unContinued on page 15

5425 Production Blvd., Surrey, BC, V3S 8P6

Phone 604.530.5758 Fax 604.530.3554

Toll Free 1.888.530.5444 Focused on Parts for John Deere & Hitachi Late Model Excavators

NOW WRECKING: ZX470LC-5

NOW WRECKING: JD 350G LC

Components · Cylinders · Cabs · Engines Undercarriage · Booms · Sticks · Linkage www.langleyexcavator.com parts@langleyexcavator.com

October 2019

Supply Post · Our Readers Are Your Buyers

Continued from page 14

dercarriage, the first forage harvesters to offer the feature. TERRA TRAC provides up to 25 mph (40 km/h) road speeds, a smoother ride, reduced soil compaction, and added stability and traction. JAGUAR 800 Series forage harvesters include several enhancements to improve crop flow and efficiency. The ground drive torque was increased by 11 percent for greater power and control in hilly and muddy conditions. The ORBIS row-independent header offers superior ground contour following and consistent crop transfer. The new ORBIS 750 and 600 feature a frame stamped from a flat piece of metal, with no welded joints, for unmatched header strength. New AXION 900-800 Series Tractors The AXION 900 and 800 series tractors deliver the comfort and flexibility needed to work faster and more efficiently. The tractor lines provide a range of power options and other available technology enhancements to match a wide range of applications.

With the most fuel-efficient PTO horsepower in its class, excellent cab comfort and superior cab visibility, this tractor is ideal for the livestock and livestock input producer, and also has applications in other markets. The AXION 800 series features a powerful 6.7L Tier 4F engine with deep torque reserves to power through tough spots in the field and steep grades. Horsepower ranges from 200 to 280. It’s offered in a HEXASHIFT or CMATIC (CVT) transmission. The AXION 900 features an 8.7L Tier 4F engine with horsepower ratings of 320 to 440, depending on the model. It’s available exclusively with the CMATIC transmission. New Balers and Hay Tools Engineering advancements featured in the new DISCO 4000 TRC mower conditioner help deliver higher-quality feed, leading to improved milk production in dairy cattle. The MAX CUT cutterbar and ACTIVE FLOAT suspension result in a more evenly cut crop with less ash content. New adjustable swath plates allow the operator to

make any sized windrow. The new ROLLANT 520 4 x 4 fixed-chamber round baler features an updated design and upgrades for better fermentation in properly formed bales. The result for the operator

the MAX SPREAD tine system. The strong tube tine arms and PERMALINK drive system allow for high workloads for heavy windrow conditions. b Source: CLAAS

Parts available for all models & generations!

Refurbished:

Used:

Aftermarket:

Control valves, final drives, hydrostatic motors, & more...

Sheet metal, blade groups, radiator/oil coolers, & more...

Track adjuster assemblies, cab glass, lift/angle cylinders, & more...

E-mail: usedparts@brandt.ca Inventory: brandt.ca/ValueParts

EQUIPMENT LTD.

Specializing in building & servicing yarders!

(2) WASHINGTON 108 1 decent, other parts machine. Stu Wheeler 604-240-9239 or Fred Zayik 204-949-8715.

TH tedder helps operators spread the crop more evenly and faster for uniform dry down and preserved nutritional value of the crop. It offers a faster ground speed and a more even spread pattern with

Current stock for dozers

WHEELER

THUNDERBIRD TSY-155 SWING YARDER, call for details.

is reduced spoilage, improved milk production and reduced labor and materials loss. More efficiently packed bales mean fewer bales to handle and more feed per bale. The new VOLTO 55

Page 15

(2) MADILL 1800 CABS, new. Call Stu Wheeler 604-240-9239 or Fred Zayik 204-949-8715.

VARIOUS CLUTCH AND BRAKE PARTS for Madill, Washington, Skagit. Call for pricing.

1-877-685-4886

• WASHINGTON YARDERS & HEAVY EQUIPMENT REPAIR • REMANUFACTURING & CUSTOM PARTS FABRICATION • RECYCLING EQUIPMENT & MATERIAL HANDLERS • MANUFACTURING SKYLINE EXCAVATORS AND DRAGLINE BUCKETS FOR THE AGGREGATE INDUSTRY

WASHINGTON 78-SL YARDER. Recent Engine, New Torque converter w/lock up, New clutch. $100,000 USD. Stu Wheeler: 604-240-9239 Stuey Wheeler: 604-841-1853 Travis: 541-760-6194 WASHINGTON 188 Madill style cab and single lever controls. Madill U/C Topping package. upgrades: Wheeler Spragg package, Air System,remote guideline package, Upgraded Gantry. Rebuilt HB clutch New bands, Rebuilt Travel motors Recent hyd. driven compressor, New Drive train $350,000 Stu: 604-240-9239

LABOUNTY PULVERIZER, new rotec & rebuilt swivel. Call Stu Wheeler 604-240-9239.

MADILL 044, good shape, been parked for 4 years, $30,000 CAD.

Washington Yarders

(2) WASHINGTON 217 YARDERS. Running when parked. Were decent machines. Call Stu Wheeler 604-240-9239 or Fred Zayik 204-949-8715.

SUPER 88 SWING YARDER We can remanufacture your original Washington 88 into a Super 88MK II. Or a new Wheeler 88 - built from scratch and customized to your needs!

8790 River Rd, Delta, B.C. V4G 1B5 / (604) 882-9995 / info@wheelerequipment.com / www.wheelerequipment.com /

Page 16

Supply Post Âˇ supplypost.com

October 2019

brandtused.ca What are you looking for? Searching for used equipment just got a whole lot easier with advanced searches, currency conversion and monthly payment calculations. And every machine is backed by Brandt â&#x20AC;&#x201C; the best-trained and committed after sales support team in the business.

brandtused.ca | 1-888-2-BRANDT

October 2019

Supply Post Â· Our Readers Are Your Buyers

2015 JOHN DEERE 1050K

Unit #: 0U275816 Hours: 3193 Location: GRANDE PRAIRIE, AB

$555,000

2018 BOBCAT S650

Unit #: 0U822920 Hours: 300 Location: REGINA, SK

$66,900

2015 JOHN DEERE 2454D Unit #: 2U240246 Hours: 6789 Location: SMITHERS, BC

$305,000

2018 JOHN DEERE 176 Unit #: 0U227879 Hours: 448 Location: SURREY, BC

$33,400

2014 JOHN DEERE 770G Unit #: 0U660444 Hours: 6393 Location: RED DEER, AB

$169,000

2009 DITCH WITCH JT1220 Unit #: 0U000296 Hours: 2774 Location: MILTON, ON

$59,000

2007 JOHN DEERE 250D

Unit #: 0U611630 Hours: 12899 Location: FREDERICTON, NB

$120,000

2016 JOHN DEERE 2154D Unit #: 0U211122 Hours: 7511 Location: KAMLOOPS, BC

$289,000

FLEXIBLE OPTIONS FINANCING CUSTOMIZED, FIND OUT MORE 1-855-711-4545

2013 JOHN DEERE 130G Unit #: 1U040139 Hours: 4300 Location: VERNON, BC

$125,000

2011 JOHN DEERE 323D Unit #: 0U204259 Hours: 2300 Location: WINNIPEG, MB

$45,000

1987 DRESSER 560B Unit #: 0U004297 Hours: 25600 Location: REGINA, SK

$38,900

2013 CATERPILLAR 259B3 Unit #: 0U003720 Hours: 2400 Location: EDMONTON, AB

$45,000

Page 17

2007 CATERPILLAR CB564D Unit #: 2U000187 Hours: 5418 Location: REGINA, SK

$35,900

2016 JOHN DEERE 244K Unit #: RM042149 Hours: 221 Location: SASKATOON, SK

$99,000

2004 VOLVO G720B Unit #: 0U036317 Hours: 6317 Location: REGINA, SK

$55,900

2017 BOMAG BW120AC

Unit #: BN351033 Hours: 3 Location: FREDERICTON, NB

$59,900

Page 18

Supply Post · supplypost.com

10th Annual Ritchie Bros.’ Corporate Kids Challenge Surpasses $1.5 Million Raised Burnaby, BC MLA Anne Kang presented a $400,000 contribution to KidSport from the Province of B.C. Ritchie Bros.’ Corporate Kids Challenge charity event celebrated its 10th year this past weekend, with more than 250 participants and $160,000 raised, 592 Lilac Cres., Campbell River, BC V9W 7G6

bringing the event’s 10year total to $1.5 million! All funds raised in this fun and action-packed event—which pits corporate teams from across Greater Vancouver against each other in a series of sports-day challenges—go to Kidsport B.C., a long-

SARATOGA

VENTURES LTD. WE SPECIALIZE IN USED PARTS & ATTACHMENTS FOR THE LOGGING INDUSTRY!

EQUIPMENT FOR SALE: • 1973 Pacific P16 Conventional Log Truck with 60 ton Pacific log trailer, Detroit 12V71N engine, Allison CLBT60616 electric shift trans, Clark BD91 drive axles ..... $75,000. • Pacific P16 Pre-Load Log Truck (no trailer), Detroit 12V71N engine, Allison CLBT5960-6 air shift trans, 90" track Clark BD71 drive axles .................................$32,500. • 1988 Madill 075 Super Snorkel mounted on a 085 tracked carrier ...................................................................$80,000. • 1980 15ft Westcoast Winder with a Detroit 471 engine and a Hydro-drive. Both the drive and the engine were replaced in 2017………………………………… .... …..$39,500. • 1991 Madill 123 Grapple Yarder. This machine was Re-manufactured at T-Mar Industries in 2014, It was re-powered w/a 12.7L Detroit Series 60 and Allison transmission, New rotek, new cab and control system, Winch re-bearing and all gears inspected, Pumps and travel motors done, The machine has been out working for the past two years and has 2,860 hours on it since it came out of T-Mar .............................................$850,000. • Madill 009 Tower w/ Cat 3406 engine. Machine is on a tracked carrier and will come with lines, blocks and rigging. ........................................................................$34,000. DISMANTLING FOR PARTS:

• Pacific P16 Log Truck and Trailer • Excavator Bkts • Madill Parts: 009, 044, 075 (Rubber & Trk) • Clark Axle Components & Parts: BD 71,000 & 91,000 • Komatsu PC400-5

TOLL FREE 1-888-668-1611 Phone: 250-286-3211 • Fax: 250-286-3284

svl@saratogaventures.com | www.saratogaventures.com

running charity designed to help financially-disadvantaged children participate in amateur sport. “We are so proud of what this event has become and the thousands of kids it has helped,” said Bev Briscoe, Chair of Ritchie Bros.’ Board of Directors. “We believe strongly in the power of sport and its ability to help build the leaders of tomorrow. I’d like to thank all our employees, who have volunteered their time to put on this event year after year. I’d also like to thank all the corporate teams who joined us this year and all the years past—we couldn’t do it without you.” What really makes the Corporate Kids Challenge different than a lot of charity events is its focus on fun. The whole event is designed to remind participants how fun and

October 2019

important sport is to our lives. To maximize the competitive spirit of the participants, each corporate team is paired with a special guest teammate, including Canadian Olympians, local athletes and celebrities. This year’s event featured Canadian national softball player Larissa Franklin, Paralympians Richard Peter and Michelle Stilwell, who is also a BC MLA, and many others. “Approximately 500 kids are going to get to play a season of sport because

of this year’s event,” said Pete Quevillon, Director of KidSport B.C. “We are making a huge impact on the lives of so many kids and we are so thankful for everyone who has contributed to making this event a success, especially our good and generous friends at Ritchie Bros. My colleagues in Kidsport chapters across Canada are envious of this tremendous event and it simply could not and would not be the success it is without the efforts of Ritchie Bros. and all its employees.”

Also onsite for this year’s event was MLA Anne Kang (Burnaby-Deer Lake) and Burnaby Mayor Mike Hurley, to present a $400,000 donation to KidSport from the province of B.C. Ritchie Bros. is the host and main sponsor of the Corporate Kids Challenge each September. Other 2019 event sponsors included Burnaby Firefighters, Ernst & Young, Mr. Mikes, Westminster Savings, and more. b Source: Ritchie Bros.

Quality Engineered & Manufactured Heavy Equipment Attachments

Toll Free 1-866-319-4114 | destec@telus.net | www.destec.ca

800.333.0650

hrparts.com Now Available ... Expanded New Parts for Excavators, Bulldozers, Wheel Loaders, and Articulated Trucks

Final Drives

Swing Drives

Hydraulic Pumps & Motors

Track Spring Assemblies

Gear Valves and Pumps

Slewing Rings

Hydraulic Cylinders

Differential Assemblies

Engines

Case • Caterpillar • Dresser • Hitachi • Hyundai • John Deere • Kawasaki Kobelco • Komatsu • Link-Belt • Volvo BUFFALO, NY

ATLANTA, GA

LOS ANGELES, CA

October 2019

Supply Post · Our Readers Are Your Buyers

Page 19

INLAND EQUIPMENT SALES www.inlandequipment.com | sales@inlandequipment.com | 150 Industrial Place, Penticton, B.C. Call Vic Kampe For Details | Ph: (250) 493-6791 | Fax: (250) 492-2762

FEATURED UNITS FOR SALE, RENT or RENT TO OWN

2 AVAILABLE 2013 John Deere 770G Motor Grader, 4,000 Hrs, Push Block, Snow Wing, LoPro Cab ...........$157,000.

2014 Cat 660S Watertruck, 21,600 Miles, Front, Rear and Side Spray, Hose Reel .........................$149,000.

40 NEW EXCAVATORS TO CHOOSE FROM

BACKHOE/LOADERS/ EXCAVATORS/FORKLIFTS 2006 Volvo EC290B Excavator, 4,830 Hrs, Cab Guards, Catwalks, Auto Lube, 2 Buckets ..$85,000. 2013 John Deere 130G, 2 Buckets, 5,985 hrs ..............................................................$100,000. 2014 Bobcat E85M Excavator, Thumb, A/C, Dozer, 1,319 Hrs ........................................................Call. 2012 Bobcat E80 Excavator, Thumb, A/C, 1,377 Hrs. ................................................................Call. 2015 Bobcat E63 Excavator, Thumb, A/C Dozer, 972 Hours ..............................................................Call. 2014 Bobcat E55 Excavator, Thumb, A/C, Dozer, 1,363 Hours ....................................................Call. (2) 2015 Bobcat E35 Excavators, Thumb, A/C, Dozer, 545-295 Hours ....................................Call. (2) 2015 Bobcat E26 Excavators, Thumb, A/C, Dozer, 295-427 Hours ....................................Call. 1981 Cat 966D Bucket Machine, 40% Tires ......Call. 1985 Cat 966D Bucket or Grapple .....................Call. 1988 Cat 966E Bucket Machine, 3rd Valve ........Call. 1978 Cat 966C, Forklift sideshift, fork adjust ....Call. 2014 Cat 950K Loader ......................................Call. 2010 Bobcat E32M Excavator, 2,600 hrs, 7,000 lb ................................................................$36,000. (2) Takeuchi TB16 Excavators ..........................Call. 2013 Terex TC16 Excavator, 3,800 lbs, cab, 670 hrs .......................................................................Call.

CRAWLERS/WHEEL LOADERS/SKID STEERS 2014 Volvo L180G Loader, 5,425 Hrs, 90% Tires, E. Steer .......................................................$139,000. (2) 2013 CAT 924K Loaders, 1,900-1,910 Hrs, Brofil Clean Air System, E. Steer, E. Shut Off, Solid or Air Filled Tires .........................................$110,000 ea. 2015 Bobcat S630, 2sp, Hyd Q/C, A/C. 2112 hrs. ................................................................$38,500. 2012 Bobcat T750, Cab, 2,000 Hrs ............$46,000. (2) 2005 Cat 246B Skid Steer, closed cab ...... Call. 2004 Cat 287 Skid Steer, rubber tracks, 1,300 hrs ...Call.

2011 Rolls-Royce Ghost, Immaculate, One Owner, 5,500 kms ........................................................ P.O.R.

TRUCKS 2013 International 4300 Water Truck A/T, New Tank, Front, Rear, Side Spray ..................$71,000. 2013 IHC 4400 S/A Water Truck, New tank, Front, Rear, Side Spray ......................................$71,000. 2012 IHC 4300 S/A Water Truck, New Tank, Front,

FOR RENT OR SALE Sizes Available: ZX245, ZX345, ZX135, ZX300, ZX35, ZX50, ZX60 & ZX210

Rear, Side Spray ......................................$69,000. 2009 IHC 4300 S/A Water Truck, A/T, New Tank, Front, Rear Side Spray.............................$69,000. 1984 P+H Omega 20 Ton Crane, 62’ Boom, 20.5x25 Tires.........................................................$24,900.

GRADERS & DOZERS 2013 John Deere 770G, c/w snow wing, 14’ MB, A/C, push block, 4,000 hrs ....................$157,000. 2004 Cat 140H 17.5x5 Tires New, 7,800 hrs ..............................................................$110,000. 2007 Cat 160H Ripper, snow wing, 8,900 hrs ..............................................................$119,900. 2008 Caterpillar 14M Motor Grader, 9,705 Hrs, 20.5 x 25 Tires @ 80%, 16’ MoBoard, Accumulators, A/C, Dual Joystick, Ripper, MODA Levelling System,

BELLY DUMPS, LOW BEDS & TILT TRAILERS 2004 Falcon 20 Ton Equip Trailer, Beaver Tail and Ramps .....................................................$14,900. 2007 Trailmax 10 Ton Tilt Trailer, Power Pack Tilt ................................................................$12,900. 1990 Peerless 50 Ton Tridem D/D Lowbed, 6'6" Neck Ext. 10 x 21 Deck, Beaver Tails, Detach .......... $44,900.

2007 John Deere 872D, AWD, 7,147 Hrs, tires 4 @ 100%, 2 @ 80%............................................ Call.

ROLLERS/PACKERS/CRUSHING & PAVING

2004 John Deere 772CH, Ser. II, AWD, ripper .Call.

(2) 2007 IR SD45D-TF, 54", w/shell kits ....$62,000.

2008 John Deere 872D, AWD, 14' MB, A/C, ripper

2007 Powerscreen 1800 Warrior, 2,587 hrs .$165,000.

.......................................................................Call. 2007 Cat 14H VHP, ripper, push block, 20.5 x 25 tires @ 60% (wing available) ........................ Call.

1984 AM General 6x6 4000 gal Heated Tank Off Hwy truck, Low Miles ..............................$25,000. 2014 Volvo Tri-Axle 4800 Gal Water Truck, low miles, 435 HP, 2 available ..............................Call. 2015 Western Star 4000 Gal Potable Water Truck, 500 HP, 18 Sp, 36,000 Km .............................Call. 2011 Ford F750 S/A Dump Truck, 200 HP, 6 Sp, 10’ Box .................................................................Call. 1980 Grove RT740 40 Ton Crane, 4 section boom, 32’ jib, 4x4x4 ...........................................$39,000. 2014 Cat 660S Water Truck, 21,600 Miles, A/T,

Circle Clutch ............................................... $199,000.

2007 Fintec 542, 5'x12' 2 deck screener ...$165,000. 2013 Dynapac CA2500D, 640 Hrs .............$85,000.

FEATURED RENTAL UNITS

★

20,000 F, 46,000 R ................................$149,000. (2) 2014-13 Volvo A40G & F Rock Trucks, Tailgates 5,000 to 6,900 Hrs..........................................Call. 2004 Ford F750, 2,000 Gallon Water Truck, Front & Rear Spray, Hose Reel............................................... $47,500. 2005 Ford F750 Water Truck, 2,000 Gal., Front Rear Spray, Hyd. Brakes, 28,400 miles.................... $49,000.

RENT TO OWN

★ NEW

NEW

Hitachi ZX245LCs

2013 Cat 924K, 1,900 Hrs, A/C Brofil Clean Air, Ride Control, Rear Camera ....................................... P.O.R.

2006 Volvo EX290B, 4,830 hrs, ROPS, autolube, 2 buckets .........................................................$85,000.

Articulated Rock Trucks

Hitachi ZX210LCs

RENTALS AVAILABLE New Hitachi ZX300LC · New Hitachi ZX135LCs · New ZX60, ZX50, ZX35 and ZX26 ·Volvo and Cat Rock Trucks · 2014 Cat 950K Wheel Loader

CALL FOR OTHER ADDITIONAL RENTAL UNITS

Page 20

Supply Post · supplypost.com

October 2019

How Can Climate Change Impact Canadian Concrete Infrastructure? 339 Sumas Way, Abbotsford | 604-850-3601 ext. 226

Ask us about our 6-month rent to own program for ALL new Hyundai construction machines!

Hyundai 9A series compact excavators bring big power to small spaces. Each model features a Tier 4 Final engine that provides impressive performance and reduced fuel consumption. You’ll appreciate the hefty power, durability and reliability of these compact machines, along with their ability to work productively in confined spaces.

According to an engineer and researcher at the British Columbia Institute of Technology (BCIT), global climate change is expected to lead to the increased deterioration of concrete infrastructure in Canada in the future. Sudip Talukdar, civil engineering program coordinator in BCIT’s School of Construction and the Environment, did computer simulations of the effect of climate change on concrete in Vancouver and Toronto. He found that concrete is more vulnerable to climate change-induced deterioration in one of the cities than the other, because of different geographic location and climate. Although most scientists believe increasing greenhouse gas emissions are affecting the Earth’s climate, there has been little investigation until recently of the impact of climate change on con-

crete infrastructure, says Talukdar. But researchers have been catching up, and more attention is being paid to what happens when an increase in greenhouse gasses and higher heat and humidity work their way into concrete infrastructure. For example, Engineers Canada is developing an infrastructure climate risk procedure called the PIEVC Engineering Protocol. Co-sponsored by Natural Resources Canada, the protocol is billed as a screening tool for assessing infrastructure vulnerability to current and future climate change. In addition, Talukdar is a member of an American Concrete Institute committee that is investigating climate change and the sustainability of concrete structures and how to impede and control concrete deterioration. He also belongs to an International Association for

Bridge and Structural Engineering task force that analyses the impact of climate change on buildings, bridges and other civil engineering structures, and makes recommendations for mitigation and remediation. Talukdar says researchers have identified three major climate change-related threats to concrete: • Increased concrete weathering and abrasion due to climatic stress and greater frequency of extreme weather events. Countries in low-lying, flood-prone areas, such as the Netherlands, will have their flood protection systems threatened more often, as water levels rise and storm frequencies increase. Climate change might also affect design values for wind loads in the Netherlands. • Increased risk of chloride-induced corrosion. Global warming may cause chloride-induced corrosion (commonly caused by road salt) of steel reinforcement by up to almost one-fifth of the rebar area. • Increased risk of carbonation-induced corrosion. • Increases in carbonation Continued on page 21

HYDRAULIC BREAKERS $36,000

$38,000

2005 VOLVO EC35, c/w Enclosed ROPS, 2 Buckets, Hydraulic Thumb, Blade, 3,994 Hrs., Runs very well!

1990 JOHN DEERE 490, c/w Enclosed Cab, 2 Buckets, Q/C, Hyd. Thumb, 28” Pads, 65% U/C, 9,653 Hrs., Good Running Unit.

DESIGNED TO HANDLE THE TOUGHEST ROCK EXCAVATIONS AND LARGE CONCRETE DEMOLITION PROJECTS. 3 YR LIMITED WA R R A N T Y

$33,900

DUAL SPEED IMPACT FREQUENCY ALLOWS THE HAMMER SPEED TO BE ADJUSTED FOR MAXIMUM PRODUCTIVITY.

$44,500

2000 JCB 214 lll, c/w Enclosed Cab, 4WD, Extenda-hoe, 2 Buckets, 4-in-1 Bucket, Forks, 8,540 Hrs .

$69,000

2001 MOROOKA MST600VD, Reconditioned Unit, New Tracks, 2-Spd., 2,401 Hrs., Low Ground Pressure, Great for fencing! Runs Well.

$214,000

2005 Volvo EC290B LC, c/w Enclosed Cab, 2 Buckets, Q/C, Hydraulic Thumb, 80% U/C, 11,059 Hrs.

2017 Hyudai HX220L, c/w Back-up Camera, 2 Buckets, Hyd. Q/C, Hyd. Proportional Thumb, 3-yr. Warranty, 3-yr. 0% Financing, 1 Unit Left!.

MAGNUM ATTACHMENTS WILL GIVE THE WORKING END OF YOUR MACHINERY SUPERIOR PERFORMANCE AND DURABILITY.

Call Henry: 604-850-4654

www.handlersequipment.com

2214 9TH LINE, BRADFORD, ON L3Z 3T1

416.679.8752 | 1.877.640.2862 | FAX 416.679.8753

October 2019 Continued from page 20

rates of reinforced concrete structures (lowering the pH) are expected as a result of increased temperatures and concentrations of carbon dioxide in the air. Talukdar says that, although climate change will have little impact on the durability of concrete structures that are built today, it will make itself felt on infrastructure built in the near future. “Structures that are slated to be constructed in 2025–2030 should begin to take into account degradation due to climate change when they are being designed,” he says. Concrete structures that are built towards the end of the 2020s in areas where carbonation-induced corrosion is a concern (due to moderate humidity and higher temperatures), can expect to begin to show a reduction of approximately 15–20 years in their “repairfree lifespan,” with signs of damage appearing within 40–45 years of construction.

Supply Post · Our Readers Are Your Buyers Talukdar says a number of measures can be taken to protect against degradation. They include increasing concrete covering when and where it is needed; improving concrete quality to reduce permeability; and adding surface coatings or barriers to inhibit the penetration of carbon dioxide. In the cases of Vancouver and Toronto, Talukdar developed computer-based climate scenarios for both cities that included climate change-induced variations in concentrations of atmospheric carbon dioxide, temperature and humidity, seasonal ﬂuctuations in temperature, and a gradual lengthening over time of summer. He then ran simulations to predict the effect of climate change on the progress of carbonation-induced corrosion in reinforced, unloaded concrete. The results of Talukdar’s research showed that, in both cities, climate change will signiﬁcantly increase the deterioration

of undamaged, unstressed and unloaded concrete caused by carbonation. Although there may not be any practical effect on the short-term structural integrity of concrete, structures which are cracked

or under load are likely to show significantly less time before carbonationinduced corrosion takes place. For in-service structures under load, the rates of deterioration are likely to be

OPTIMIZE MACHINE PERFORMANCE WITH ESCO® AND LSW WEAR PARTS

Page 21 even faster. The effects are predicted to be quite significant, with potential increases in carbonation depths in concrete over 100 years of approximately 45 per cent. Carbonation depths are

predicted to be greater in Toronto than in Vancouver, due to the higher relative humidity of the west coast city. b Source: By Amy Chen for BCIT

ESCO® Attachments

ESCO Manganese Crusher Wear Parts

Ultralok Tooth System ®

lswwearparts.com www.esco.weir

Fredericton, NB 506-458-5613

Truro, NS 902-895-4913

AUTHORIZED DEALER FOR

Call Us Today For More Info! 418-834-0101 | info@enviroJim.com

WWW.ENVIROJIM.COM

Page 22

Supply Post · supplypost.com

Canadian Grain Commission Takes Unique Steps To Protect Grain Producers The Canadian Grain Commission is taking unique steps to protect grain producers who have delivered to ILTA Grain Inc. The commission has negotiated the creation of an escrow account into which funds will be placed that relate to grain deliveries for which no cheques have been issued. Producers may

be compensated from this account. The fund will be held by PricewaterhouseCoopers, the court-appointed monitor, until it has been determined how the funds will be distributed. The commission has visited ILTA Grain Inc.’s offices and facilities and is completing a final audit to establish the number and amount of eligible claims.

“attachment specialists”

780-962-8586 ATTACHMENTS BLADES angle, straight, & U for all sizes RIPPERS single or multishank for all sizes WINCHES rebuilt, complete for all sizes

EMAIL: CRAWLERSALES@TELUS.NET FAX: 780-962-9465 Edmonton, AB

PARTS NEW, USED & REBUILT PARTS & COMPONENTS

KOMATSU 100 units dismantled CATERPILLAR 15 units dismantled CARCO - PACCAR 75 winches dismantled ALLIED - HYSTER 75 winches dismantled

To date, the Canadian Grain Commission has heard from more than 200 producers. To be eligible for a claim made under the Safeguards for Grain Farmers Program, a producer must: • Deliver to a licensed grain company • Deliver one of the twenty grains regulated by the Canada Grain Act • Present the proper documents (a primary elevator receipt, a grain receipt, a cash purchase ticket or cheque) • Demand payment during eligibility periods • Report non-payment to the Canadian Grain Commission As part of the negotiation of the escrow agreement, the Canadian Grain Commission reinstated ILTA Grain Inc.’s grain dealer and primary elevator licences effective August 7, 2019, with the condition that ILTA Grain Inc. cannot purchase grain from, receive grain from, or

otherwise incur liabilities to grain producers. ILTA Grain Inc. may sell, remove or otherwise transfer grain or grain products held or stored at its facilities. The Canadian Grain Commission will contact any producers who have reported payment issues. Once the commission has confirmed the producers’ contact information, it will send each producer a completed claim form to sign and return to the Canadian Grain Commission as soon as possible. The claims process cannot move ahead without a signed claim form. Any producers who have not contacted the commission yet, but who delivered to ILTA Grain Inc. before July 11, 2019, and have not received payment, should immediately contact the Canadian Grain Commission at 1-800-853-6705. Quotes “One of the key conditions of reinstating ILTA Grain Inc.’s licences is that ILTA is not allowed to purchase grain from producers. At the Canadian Grain Commission, we take producer protection seriously. We have taken several steps to protect the rights of producers who

October 2019 have delivered to ILTA Grain Inc. including visits by our auditors and inspectors to obtain information and documentation, starting the claims process, and negotiating an escrow agreement.” — Patti Miller, Chief Commissioner and Deputy Head, Canadian Grain Commission. Quick facts • ILTA Grain Inc. is licensed to operate primary elevators in Belle Plaine, Saskatchewan and Saskatoon, Saskatchewan and is licensed as a grain dealer. • On July 8, 2019, British Columbia’s Supreme Court placed ILTA Grain Inc. under creditor protection because of its financial difficulties. • On July 11, 2019, the Canadian Grain Com-

mission suspended all licences issued to ILTA Grain Inc. • As a condition of licensing, licensed grain companies are required to tender security for outstanding grain liabilities to the Canadian Grain Commission as a bond, letter of credit, letter of guarantee, cash deposit, trust account or payables insurance. If a licensed company does not meet its payment obligations, the Canadian Grain Commission uses the company’s security to compensate eligible producers. The Canada Grain Act does not guarantee full payment in the event that a licensed company fails. b Source: Canadian Commission

Grain

FOR RENT

MCCloskey J45 45 X 27 JAW CRUSHER

Langley, BC

Tel: 604-866-0482

NORSTONE EXCAVATING

AUCTION DRAYTON VALLEY REAL ESTATE & EQUIPMENT CONSIGNMENT

Can’t make it? BID ONLINE Internet Bidding @ 10am

Sat., October 19th, 2019 – 10 am - 3351 50th St, Drayton Valley, AB - Team Auctions Yard

NEW ITEMS ADDED DAILY | CONSIGN NOW | CALL CLAYTON 7809106221

2006 INT SCREW PILLING UNIT

2007 CAT D 6N LGP

2013 BWS 48FT EQ TRAILER

2013 HITACHI 210LC EXCAVATOR

JD 648G SKIDDER

1996 CAT 322L DELIMBER

1993 TIMBERJACK 618FB BUNCHER

JD 955 LOADER TRACTOR

Check Out Our Website For More Listings

www.teamauctions.com

Call Clayton Dubnyk @ 780-910-6221 For More Info

October 2019

Supply Post Â· Our Readers Are Your Buyers

www.morookacarriers.com

1-877-667-6652

e s lin art ll fu a p s! k r a oo ack r fe r of Mo r t e e W EM bb O ru & of

WE KEEP CANADA ON TRACK

Page 23

Page 24

Supply Post · supplypost.com

Looking for

Suncor Energy To Invest $1.4 Billion In Low-Carbon Power Cogeneration

Parts?

• Delivers superior returns and a significant contributor to the company’s goal of growing incremental free funds flow by $2 billion by 2023. • Suncor’s greenhouse gas (GHG) emissions associated with steam production at Base Plant will be reduced by approximately 25%. • GHG emissions in the province of Alberta will be reduced by approximately 2.5 megatonnes per year. Suncor announced it is replacing its coke-fired boilers with two cogeneration units at its Oil Sands Base Plant. The cogeneration units will provide reliable steam generation required for Suncor’s extraction and upgrading operations and generate 800 megawatts (MW) of power. The power will be transmitted to Alberta’s grid, providing reliable, baseload, lowcarbon power, equivalent to approximately 8% of Alberta’s current electricity demand. This project will

BEC has one of the largest inventories of JCB Parts! Alternators ➔ Vales ➔ Glass ➔ Lights ➔ Filters ➔ Oils ➔ Pins ➔ Bushings ➔ Buckets ➔ Attachments ➔ Components ➔ Machine Overhauls

We rebuild JCB Transmissions, Axles, and Differentials Transmissions Dyno-Tested under load on our in-house dyno bench

➔ Even after paying freight we can save you up to 36% and more! ➔

Call 905-670-7678 Fax 905-670-7260 | www.becequipment.ca 1790 Bonhill Rd., Mississauga, ON L5T 1C8

$224,500 2013 John Deere 2954D “Road Builder” c/w: 42” dig bkt, 64” CU bkt, 52” T-Mar grapple & heel rack, Q/C, hyd. thumb,aux. hyd (plumbed for grapple & heel rack), hoe front, forestry cab on 7” riser, forestry guarding pkg w/ aux. fuel tank, high walker u/c w/ 28” DBP 7,6XX hrs. Recent new U/C and linkage R/B. Ready to work!

increase demand for clean natural gas from Western Canada. “This is a great example of how Suncor deploys capital in projects that are economically robust, sustainability minded and technologically progressive,” said Mark Little, president and chief executive officer. “This project generates economic value for Suncor shareholders and provides baseload, low-carbon power equivalent to displacing 550,000 cars from the road, approximately 15% of vehicles currently in the province of Alberta.” The project cost is estimated to be $1.4 billion, delivering a high teens return and projected to be in-service in the second half of 2023. This project will substantially contribute to the company’s goal of an increased $2 billion in free funds flow by 2023. This will be achieved through Oil Sands operating cost and sustaining capital reduc- Source: Suncor

WWW.FORESTECH.CA Contact Tim Lloyd : 250-703-3551

4335 BARGE TERMINAL RD. CAMPBELL RIVER, BC

$59,500

tions along with margin improvements. It will also contribute materially to Suncor’s publicly announced GHG goal. Replacing the coke-fired boilers with cogeneration will reduce GHG emissions associated with steam production at Base Plant by approximately 25%. It is also expected to reduce sulphur dioxide and nitrogen oxide emissions by approximately 45% and 15% respectively. The cogeneration units will eliminate the need for a flue gas desulphurization (FGD) unit, which is currently used to reduce sulphur emissions associated with coke fuel. Decommissioning the FGD unit will reduce the volume of water the company withdraws from the Athabasca River by approximately 20%. By producing both industrial steam and electricity through a single natural gas-fuelled process, cogeneration is the most energy-efficient form of hydrocarbon-based power generation. Suncor believes this project will contribute to both Alberta and Canada’s climate ambitions. b

VISIT OUR WEBSITE FOR OUR FULL INVENTORY:

FORESTECH EQUIPMENT

Finning / Morgan Power Apparatus M-32F Tank Drill, c/w: PR66 hammer, 22’ steel slide, 3800 square boom, ROPS cab, 800 CFM comp., Cat 3306DI eng., aluminum mag., mounted on M-32 crawler carrier.

October 2019

$474,500 2018 John Deere 3754G “Road Builder” c/w: 48” dig bkt, 72” CU bkt, Q/C, hyd. thumb, forestry cab on 8” riser, forestry guarding package w/ aux. fuel tank, Tier III engine w/ Tier IV cooling pkg, high walker undercarriage with 28” DBP. 2,1XX hours. Ready to work!

$124,500

$154,500 1995 Caterpillar 315L Hyd. Excavator Drill, c/w: John Henry Model 14 hyd. rock drill pkg (c/w: John Henry hammer, 20’ steel slide, hyd. centralizer, compressor powered by c/weight mtd. Cat 4 cylinder eng.) hoe front, alum. powder mag., cab, standard undercarriage with 26” TBP.

PROCESSORS

FELLER BUNCHERS

FORESTRY EXCAVATORS

2006 Caterpillar 330C FMHW Processor c/w: 2004 Waratah HTH624 Super processing head, log loader front, west coast elevated rear entry cab, forestry guarding pkg w/ aux. fuel, tank, high walker U/C w/ 30” DBP. Recent head R/B, ready to work! ..$224,500.

2005 Valmet 475EXL, c/w: Quadco OFH22B 22” felling head, 360 degree wrist, ROPS cab, Cummins eng., fire suppression, Pro Heat, self levelling undercarriage w/ 28” SBP. 10,645 hours. Recent new pumps, work orders. ...................................$124,500.

2011 John Deere 3754D “Road Builder”, c/w: Dig bkt, Q/C, hyd. thumb, hoe front, forestry cab on 8” riser, forestry guarding package w/ aux. fuel tank, high walker undercarriage w/ 28” DBP. Recent engine O/H, ready to work!.........................$164,500.

LOG LOADERS 2003 Caterpillar 330C FMHW Processor c/w: 2004 Waratah HTH626 processing head, log loader front, 2014 Kobelco SK350MkIVLL, c/w: T-Mar grapple, west coast elevated rear entry cab, forestry guarding pkg w/ aux. fuel, tank, high walker U/C w/ 28” DBP. heel rack, LL front, west coast elevated rear entry cab Works orders, ready to work! ......................$174,500. on 72” riser, Cummins eng., forestry guarding pkg w/ aux. fuel tank, high walker undercarriage w/ 30” double bar pads. 3,180 hours on rebuild by T-Mar WHEEL LOADER Ind. in 2014. ...................................................P.O.R. 2007 John Deere 844J Wheel Loader c/w: WBM M33 log grapple, third valve, ROPS cab, ride control, 29.5 2004 John Deere 3554LL, c/w: T-Mar grapple, heel X 25 tires, forestry guarding package. 15,145 hrs. rack, LL front, west coast elevated rear entry cab on Recent trans. r/b, brake work,r/b pump, good rubber! 72” riser, forestry guarding package w/ aux. fuel tank, high walker undercarriage w/ 28” DBP ........ $89,500. ......................................................................$199,500. 2002 Madill 3800C c/w: WBM grapple, heel rack, 2004 Caterpillar 980GSII FM c/w: WBM 20’ log LL front, west coast elevated rear entry cab on riser, grapple, spreader bar, third valve, 29.5X25 tires ROPS Series 60 engine, forestry guarding package, high cab, Command Steering, forestry guarding package w/ walker u/c with 28” double bar pads........$249,500. aux. counterweight. 20,04X hours ...............$99,500. 2000 Hitachi EX370LC-5LL c/w: Pierce grapple,heel 1992 Caterpillar 980F “Logger” c/w: WBM log rack, log loader front, west coast elevated rear entry grapple, spreader bar, third valve, ROPS cab, 29.5X25 cab on 72” riser, forestry guarding pkg w/ aux. fuel tires, forestry guarding pkg w/ aux. counterweight ..... tank & aux. counterweight, high walker u/c w/ 30” .......................................................................$34,500. DBP. Recent new tracks, boom foot R/B...... $89,500.

2011 Caterpillar 568 “Road Builder” c/w: Dig bkt, clean up bkt, hyd. Q/C, hyd. thumb, aux. hyd., hoe front, forestry cab on 18” riser, forestry guarding pkg, high walker U/C w/ 28” DBP. 10,225 hrs. Recent U/C rebuild w/ very low hours .........................P.O.R. 1992 Caterpillar FB300B “Backspar” c/w: Dig bkt, Q/C, hyd. thumb, hoe front, single shive backspar attachment, forestry cab, forestry guarding package, highwalker undercarriage with 24” SBP. Work orders. .........................................................$44,500.

YARDERS 1988 Madill 122 Swing Yarder c/w: Grapple, lines, 57’ boom w/ fairlead, split cab, 8V92 eng., Wheeler air system update, two guy lines, mounted on Madill 087 hydraulic drive carrier w/ 32” TBP. Work orders, good operating condition. ........................$399,500.

OFF HWY TRUCKS & LOWBED TRAILERS Pacific P-16 T/A Conventional Truck & Knight 100 Ton T/A Lowbed Trailer, c/w: 12V71N, Allison 5960 trans., spring susp., Clark BD91 axles, 14:00X25

1994 Caterpillar D5H TSKII Track Skidder, c/w: 6 way blade w/ custom snow blade attachment, sweeps, ROPS cab, 22” SBP, Esco swing boom w/ Esco bunching grapple.

tires, 13’ bunk on turntable, log bunk hitch, 21’3” L X 14’ W wood lined deck, KB axles, 14:00X25 tires, manual beaver tails, push block. .................$104,500. Kenworth 849 T/A Truck & King TD100RG T/A Lowbed Trailer, c/w: Cummins NTC 400 eng., 13 X 4 trans, spring susp., Clark BD90 axles, 14:00X25 tires, 11’W X 20”L wood lined deck, Timken axles, 14:00X25 tires. ..............................................$49,500.

OFF HIGHWAY LOG TRUCKS Hayes HD Conventional T/A Log Truck & Trailer c/w: Cummins 400, 5X4 trans., spring susp., 4640 rears, Bud wheels, 12:00R24 tires, T/A pole trailer. ........................................................................$37,500 Inventory of 2 Kenworth 849 & 850 Pre Load T/A Log Trucks & Trailers c/w: Cat or Cummins K Model eng., Allison trans., spring susp., Clark BD91 rear axles, 14:00X25 tires, T/A pre load trailer ................... .......................................................From $84,500/ea. Pacific P-16 Pre Load T/A Log Truck c/w: 12V71TT, Allison 6061 electric, Spring susp., Clark BD91 rear axles, 14:00X25 tires, Columbia Pre Load T/A trailer. .......................................................................$59,500.

MISCELLANEOUS 2004 Tigercat 630C Grapple Skidder, c/w: Decking blade w/ extensions, sweeps, ROPS cab, 35.5X32 tires w/chains, dual function arch w/ bunching grapple.....................................$54,500.

$24,500

2003 Ford F-550XL Regular Cab 4X4 Service Truck c/w: V8 diesel, 6 speed, A/C, 11’ heated steel walk in service body, gas powered compressor, 5’ rear deck, Autocrane 3203 hyd. crane, 245/70R19.5 tires, two spare tires & rims. Certified until Jan 2021.

October 2019

Supply Post · Our Readers Are Your Buyers

James River Equipment Takes On Sennebogen Material Handlers A recent agreement with Sennebogen LLC has concluded James River Equipment’s two-year search to expand its range of OEM lines with the right complementary machines for its customers in the Virginia region. Sennebogen LLC President Constantino Lannes welcomed James River Equipment as the manufacturer’s dealer in Virginia. “We are very pleased to have such an experienced and diversified representative to serve Sennebogen’s customers in this region,” said Lannes. “As a longstanding family-owned business, James River is an ideal match for Sennebogen purpose-built material handlers.” Originally founded in Colorado in 1926 by Rudolf Romer, James River Equipment has long since migrated to its current base near Richmond, VA, now led by the founder’s greatgrandson, Mark Romer. The dealership represents the full range of John Deere

equipment throughout a four-state area, including eight branches in Virginia that will support the Sennebogen line. John Grantier, James River’s VP of Sales in Virginia, highlights the areas where Sennebogen fulfills his mission to provide customers with a complete one-stop source of primary equipment. “Two of our niche markets include logging and material handling,” he explains. “Our employees have been in these industries for many years and have seen our customers’ needs evolve. Our parts and service departments have unique specialties to handle the needs of both industries, and thus makes us a great partner for both logging and material handling.” Grantier cites his team’s strong relationship with scrap yards and log mills as a strong foundation for growing Sennebogen’s presence in Virginia. Purpose-built material handlers from Sennebogen

meet the complementary needs for high stacking and rapid cycle times. Sennebogen’s resources in North America also complement James River’s commitment to service and parts. “Our biggest strength would be product support,” says Grantier. “Our parts availability and service expertise in these niche markets makes us one of the best resources for customers.” Although Sennebogen machines aren’t manufactured in the US, Sennebogen LLC, in nearby Stanley, NC, maintains a 100,000 sq. ft. facility for its head office, warehouse and Training Center. “Knowing that Sennebogen resources are so close to our own footprint made us feel confident in our ability to add Sennebogen to our line-up. Having the headquarters so close allows us to train our sales and product support groups properly.” “Everyone is extremely impressed by the Sennebogen facility,” Grantier continues. “After visiting their facility, it became very apparent that Sennebogen and James River are aligned in critical core competencies: the dedication to training, the investment in infrastruc-

ture and the commitment to customer uptime with their comprehensive parts stocking investment.” To highlight the capabilities of both equipment and support staff, James River

Page 25 Equipment has planned a demonstration clinic in its Winchester location on September 11th. Grantier reports that some of Sennebogen’s most popular machines for forestry and

Service Centres: Langley, • Chilliwack • Parksville

scrap applications will be featured in the firm’s machine inventory, including the 718 M, 818 M and 835 M E-Series models. b Source: Sennebogen

www.rollinsmachinery.com E-mail: jeff@rollinsmachinery.ca

Phone: 604-533-0048

DEMOS AVAILABLE NOW

Other products available contact us today! Johnston Sweepers are available in: • Regenerative Air • Mechanical • Vacuum

Service Centres:

Langley • Chilliwack • Chemainus

1-800-665-9060

www.WESTERRAEQUIPMENT.com 1.888.713.GRIT Abbotsford 31260 South Fraser Way V2T 6L5

Kamloops 585 Cree Road V2H 1H9

Victoria 827 Station Avenue V9B 2S2

Nanaimo 2140 Schoolhouse Road V9X 1T4

2016 Doosan DA30-5 $350,000 Articulated Dump Truck #116707 2,188 hrs

2017 Bobcat S570 Skid Steer Loader 233 hrs

$51,000 #108660

2017 Bobcat T650 Track Loader 283 hrs

$77,900 #110043

2018 Bobcat S650 Skid Steer Loader 778 hrs

2015 Bobcat S630 Skid Steer Loader 1,404 hrs

2017 Bobcat S570 Skid Steer Loader 522 hrs

$52,900 #108661

2008 Bobcat 5600 Toolcat Work Machine 3,794 hrs

$32,000 #118236

2017 Vermeer RTX550 $125,000 Ride-on Tractor #109824 63 hrs

$49,900 #S13253

$43,500 #107001

Page 26

Supply Post · supplypost.com

October 2019

Doosan Infracore North America, LLC, is expanding its crawler excavator lineup with the new DX170LC-5 excavator. The 17-metric-ton model falls below the 80,000 gross vehicle weight rating limit for simplified and less expensive transportation. This new Doosan excavator size allows for easier transportation, especially for small- to mid-size contractors who perform light excavation projects, such as digging residential basements or commercial building footings. This model reduces the need to obtain

a special transport permit when moving to and from jobsites. The width and combined weight between the machine, trailer and Class 7 towing vehicle meets current transportation requirements. Owners should still check local requirements when transporting equipment. “Load ratings vary from state to state, so owners still need to check federal, state and local laws and regulations regarding weight, width, length and height of a load before making preparations to transport their machine on

public roads, bridges, highways and interstates,” says Aaron Kleingartner, Doosan Infracore North America marketing manager. The DX170LC-5 excavator will be a step up from the smaller Doosan DX140LC-5 and DX140LCR-5 models, but it won’t be as large as the DX180LC-5. “We felt it was very important to offer a model in this size class to ensure our excavating customers could minimize transportation costs, while retaining the performance they expect from Doosan excavators,” says Kleingartner. “The

DOOSAN

New Doosan DX170LC-5 Crawler Excavator Meets Weight Limits For Transportation

The size of the DX170LC-5 model reduces the need to obtain a special transport permit when moving to and from jobsites. new model fits nicely in our crawler excavator lineup, giving our customers more options to suit their needs.”

The best industrial trucks start with a DARBY seat!

RAMSEY COMPANY INC. Office: (360) 748-8918 | Jim Ramsey (360) 269-3437 | Jack Ramsey (360) 269-0902

Performance features In addition, the DX170LC-5 will offer many performance-driven features, including good visibility to the jobsite. Similar to current “dash 5” Doosan crawler excavators, the DX170LC-5 will offer four power modes for more control to better balance fuel consumption and machine power to the working conditions. Power modes include the following: • Power+ mode delivers the fastest workgroup speeds for loading trucks, top digging performance and extra power for digging in hard ground. • Power mode provides exceptional power and performance for tough digging conditions and truck loading tasks. • Standard power mode balances the excavator’s fuel consumption in everyday digging, grading and lifting tasks. • Economy mode reduces fuel consumption for low-demand applications and slows down machine movement for

conditions that require extra precision. To further match the machine to the application at hand, DX170LC-5 operators will be able to choose from four work modes – digging, breaker, shear and lifting – to maximize efficiency and fuel economy in specific applications. Operators can configure the work mode by adjusting a dial switch on the right-hand console. A work mode icon displays on the monitor after the operator presses the mode button. Doosan crawler excavators come standard with a rearview camera, enhancing operator visibility on jobsites to help minimize damage to the machine and unnecessary downtime. An optional sideview camera is available. Camera views are easily accessible to operators on the 7-inch LCD screen mounted in the excavator cab. Operators have the option of a split screen to see both camera views at once. Continued on page 27

THE FINEST BUCKETS, SYSTEMS, TRAINING AND DESIGN!

Reach out over 1,500' | Dig to 120' or more! Turnkey systems from 4 - 15 cubic yards! Sand, Gravel, Mud & Slurry - We can dig it!

VISIT US ONLINE: WWW.RAMSEYCOINC.COM

October 2019

Supply Post · Our Readers Are Your Buyers

Continued from page 26

DoosanCONNECT telematics The Doosan DX170LC-5 will come with a standard three-year subscription to the DoosanCONNECT telematics system, which allows equipment owners and fleet managers to remotely monitor machine location, hours, fuel usage, engine idle versus work

Browse Thousands of Equipment & Truck Listings at .com

time and error codes, as well as engine and hydraulic temperatures. Machines can be monitored via an online account. In addition, Doosan dealers can provide improved customer support using the system by responding to machine warning messages and alerts, troubleshooting machine issues, and then sending a field service vehicle to help with repairs and deliver the proper parts. Tier 4 solution The Doosan DX170LC-5 complies with Tier 4 emission standards with modified diesel engine and aftertreatment technologies. The engine is optimized for use with a high-pressure common-rail (HPCR) fuel delivery system and a cooled exhaust gas recirculation (CEGR) system. It uses a diesel oxidation catalyst (DOC) to reduce particulate matter (PM) and selective catalyst reduction (SCR) aftertreatment to reduce nitrogen oxides (NOx). Additionally, a variety of aftertreatment systems have been implemented as part of Tier 4 compliance, such as DEF, which is used with SCR technology.

Options Factory-installed options for the new DX170LC-5 excavator include the following: • Straight travel pedal, which allows the operator to travel in a straight line more easily • Two-way auxiliary hydraulic pedal (in addition to joystick control) • Intelligent floating boom • Cab guarding for special applications • Sideview camera • Additional work lamps • Rotating beacon • Air compressor DX170LC-5 Crawler Excavator Specifications • Horsepower (net): 127 hp Tier 4-compliant diesel • Operating weight: 38,376 lb. • Bucket breakout force: 25,794 lbf. • Arm breakout force: 18,078 lbf. • Maximum digging depth: 19 ft. 11 in. • Maximum digging reach: 28 ft. 10 in. • Minimum loading height: 8 ft. • Width: 8 ft. 5 in. • Bucket capacity (heaped, ISO/SAE): 0.86 yd3. b Source: Doosan

Page 27

$49,900

$79,900

2006 HITACHI ZX350LC-3 EXCAVATOR FOR SALE EROPS C/W HYD. THUMB, BUSH GUARDING, 8,200 HRS, DIG BUCKET.

1999 HITACHI EX225 USR LC-5 C/W 2 BKTS, Q/C , THUMB, NEW PINS AND BUSHINGS, END OF STICK, RESEALED CONTACT VALVE AND CYCLINDERS.

USED EQUIPMENT & MACHINERY FOR SALE OR RENT 2008 Cat 980H, 14,000 hrs, recent trans., new L4 tires, on-board scale, rent or rental purchase available ..............................................................................................................................$154,500 2005 Cat D6R XL Series II, P.A.T. dozer, EROPS w/air, MS ripper, guarding .....................$159,900 2006 Daewoo D500 Wheel Loader, 9,600 hrs, exc. tires, work ready ..............................$99,000 2012 Deere 225DLC, c/w 5,200 hrs, Pro Link hyd. thumb, Q/C, dig bkt ............................ $119,900 2005 Hitachi ZX330LC, c/w thumb, Q/C, 2 bkts, new final, 10,000 hrs, exc. U/C, catwalks, FOPS, new final drive ...................................................................................................................SOLD 2005 Hitachi ZX330LC, c/w 11,000 hrs, Q/C, hyd thumb, dig bkt .......................................$89,900 2007 ZX135US, 3,200 hrs, hyd Q/C, blade, 54" C/U bkt w/BOE, hyd thumb, A/C, dig bkt....... $100,000 2007 Volvo 360BLC, c/w 8,400 hrs, Q/C, thumb, 2 bkts, catwalks & FOPS ........................ $79,900 2002 Cat 980G Loader, new 29.5R25 tires, GP bucket w/BOE.......................................... $109,900 Loader Tires 17.5 x 25 - 29.5 x 25 ................................................................................................ POR FOR RENT ONLY 1-800-663-5454 2012 Deere 225DLC (2) 2006 Volvo A30D (2) Volvo A30D 2013 Hitachi ZX135USBL-3 2018 ZX50U-5 2013 HITACHI ZX135USBC-2 Terex J1170 Jaw Crusher 2018 ZX35U-5 2018 HITACHI ZX50/ZX35U-5

MACHINERY SALES & RENTALS • KELOWNA, B.C. PHONE: 250-769-5454 • FAX: 250-769-5005 continentalequipment.ca ALSO IN STOCK:  Filters  Cutting Edges  Bucket Teeth  Equipment Attachments  OTR Loader & Rock Truck Tires

Unreserved public equipment auctions

2018 Hitachi ZX245USLC-6N Low meter hours | Chilliwack

WH EE LL OA DE RS

LO AD ER BA CK HO ES

73 5+

39 0+

37 5+

CR AW LE RT RA CT OR S

2015 Komatsu D155AX-7 | Regina

John Deere 310SJ 4x4 | Regina

2015 John Deere 844K Series II | Regina

2014 Caterpillar D6T LGP | Saskatoon

2017 John Deere 844K Series III | Saskatoon

17 5+

98 0+

HY DR AU LIC EX CA VA TO RS

2018 Link-Belt 3240PHN w/2018 SouthStar QS500 | Chilliwack

AR TIC UL ATE DD UM PT RU CK S

PR OC ES SO RS

10 +

Special limited-time financing offer! No payments for 120 days*

1 of 2 – 2012 Caterpillar 740B 6x6 Saskatoon

54,980+ items in 85+ auctions including Toronto, ON Oct 1–2 Saskatoon, SK Oct 9–10 Chilliwack, BC Oct 16–17 Regina, SK (Cara Dawn Transport) Oct 18–19

Edmonton, AB Estevan, SK Regina, SK North Battleford, SK

Auction Company License #303043, Auction Company License #309645, MV Dealer #10539. | *OAC. Terms & conditions apply. See rbauction.com

Oct 28–Nov 1 Oct 31 Nov 5 Nov 7

Bid in person or online

▸ No minimum bids or reserves ▸ Test and inspect on-site ▸ Open to the public ▸ Free registration

Financing & leasing

Up to 100% financing, with no money down.

More items added daily Call about selling: 1.800.211.3983

See complete listings at rbauction.com

Page 28

Supply Post · supplypost.com

October 2019

A Legacy Of Excellence: The Wheeler Equipment Story FRONT PAGE STORY: B.C.-based Wheeler Equipment continues the legacy of Washington Iron Works forestry machines and yarders in the Pacific Northwest. By Ronald Mullins

RONALD MULLINS

Loaded up and ready to roll. A Wheeler/Washington Super 88 Swing Yarder ready for delivery to Karl Boomer’s Gordon River Contracting.

leg·a·cy /'leg sē: something of value that is handed down or conveyed from one person to another. ex·cel·lence /'eks( )l ns: the quality of being outstanding or extremely good. e

istorians detail the timing and impact of the four industrial revolutions that have impacted and transformed the world as we know it today. The first was characterized by the emergence of mechanization… the transition from hand production methods to that of machines. This era was dominated by the invention and use of the steam engine. Towards the end of the 19th century, the second of these revolutions was championed by the emergence of new energy sources, that being electricity and gasoline and the development of the combustion engine. This heralded an era of mass production. Nearly a century later, the third industrial revolution appeared with the emergence of nuclear energy and the rise of electronics. Today we are witness to the impact of the

internet and artificial intelligence. Historians will refer to this as revolution number four. It is often debated as to which one of these revolutionary periods was the most dramatic and life altering. Many would agree that a combination of era one and two may hold the most impact on what we, in the so-called industrialized world, have achieved and are accomplishing. Capitalizing on Change Getting in on the trailing edge of revolution number one and the leading edge of number two was Seattle, Washington-based, Washington Iron Works, a company under the guidance of president J.W. George and general manager J.M. Frink. As a result of the region’s railway, steamship and milling interests, Seattle was fast becoming known as the Pittsburgh of the west. The

demands of industry in the region, coupled with the excellence of product produced, saw the Washington Iron Works quickly grow. In 1883 with fifty employees… W.I.W. melted over 1,000 tons of iron in the foundry and the machine shop finished three mill engines, one logging locomotive, eight steamboat engines and a large amount of custom work. Frink was the man largely responsible for perfecting the logging engine or steam donkey. The “Washington” logging engine and winch system was the recognized industry standard, and it was used not only in Washington, Oregon and British Columbia but also in Alaska, the Philippines, Burma (Myanmar), India and, in fact wherever there were logs to harvest and move. Washington Iron Works capitalized on the industrial

changes of the era, and the equipment they designed and built became the ‘gold standard’ demanded by companies and contractors around the world. The business flourished, building steam engines or donkeys, ship engines, railroad cars, logging yarders and whirly cranes for the maritime industry. They were a manufacturing force to be reckoned with. Additionally, their steamskidders, cranes and highlead and skyline cable systems were used in forest and logging operations up and down the west coast of the U.S. and Canada and around the world. As well, their cranes and cable systems, some of the largest ever built, were instrumental in the construction of the Hoover Dam and, a bit closer to home and years later, the Revelstoke, British Columbia hydro electric project.

CONTRIBUTED

As a result of a downturn in the economy and an evolving industrial landscape, the company began selling off its assets in the 1980’s and extinguished all fire in its furnaces and closed the doors for good in 1986.

Not only was Stuart Wheeler a respected heavy-duty mechanic and logger, he had been bitten by the entrepreneur bug, and in 1991 Wheeler Equipment Ltd. was formed.

his heavy equipment mechanics apprenticeship with Howe Sound Timber. This Squamish, British Columbia- based, premierforestry company, owned and operated three of the industry standard Washington TL-6 Trakloaders. “That was my introduction Closer to Home to Washington Iron Works Meanwhile, in 1976, a and their machines,” stated young man by the name Wheeler in a recent interContinued on page 29 of Stuart Wheeler started

October 2019

Supply Post · Our Readers Are Your Buyers

Page 29 Obtaining used Washington Iron Works equipment for rebuilding is getting more difficult as the years pass.

Washington Iron Works logging steam donkey and winch. Copyright Wikipedia. Used with permission. reclamation yards…all of which needed parts and repair. Although the first few years were slow, as with almost any business startup, Stuart Wheeler was off to a good solid start. Today, Wheeler Equipment Ltd. is flourishing with up to 20 employees and its own 20,000 plus square foot manufacturing facility on River Road in Delta, British Columbia. A Family Affair But Stuart Wheeler has not built up Wheeler Equipment to its current successful position alone. He has the daily support of his wife Josie… reportedly, the glue that keeps it all together, and his son Stuart Wheeler Jr., who manages the startup, maintenance and repair side of the business. Josie Wheeler has used her financial training and background to get the fledgling business off the ground and to keep it on the financial straight and narrow for the past three and one-half decades. “It has not always been easy,” she stated, “with an emphasis on logging equipment the ups and downs of that business affected ours. But fortunately we had the maintenance of the cranes used in the recycling yards and shipping barges to sustain us.” Both the recycling yards and the shipping and logging barge industries relied heavily on Washington Iron Works manufactured cranes in the past, and there was no one around who knew more about these units than Stuart Wheeler Sr. After all, he owned all the W.I.W. plans and drawings. Another key advancement for the company came in 2005 when Winnipeg, Manitoba-based Nelson River Construction was in desperate need of someone who was knowledgable about and was ca-

RONALD MULLINS

view. “I worked for Howe Sound for a few years, then was recruited by Washington Iron Works and worked for them until the company closed.” Upon dissolution, Washington Iron Works Canadian operations were purchased by British Columbia-based TriCan Machinery, and Stuart Wheeler returned home and was hired on by them. Regrettably the market turned again and TriCan was forced to close its doors, but not before they had acquired all the plans and drawings for everything that Washington Iron Works had designed and/or built. Not only was Stuart Wheeler a respected heavyduty mechanic and logger, he had been bitten by the entrepreneur bug, and in 1991 Wheeler Equipment Ltd. was formed. First up, he purchased all of the Washington Iron Works Intellectual Property and Plans from the now defunct TriCan Machinery, that is all 460,000 plans and drawings…all on microfilm. There was so much material to go through that Wheeler had to hire someone whose only job was to digitize and catalogue everything just so anyone could find it. “I even have plans and drawings for steam engines and steam locomotives, so I’ll be okay should their popularity ever return,” Wheeler said with a big smile. But owning the plans and drawings does not a business make. Stuart had to go out and find the business. Fortunately, he was well known and highly respected in the forest industry, and there was a goodly number of Washington forestry machines and yarders either working or parked in the Pacific Northwest as well as Washington cranes on coastal log barges and in the local recycling or

RONALD MULLINS

Continued from page 28

Stuart Wheeler Jr. works with the crew to put the finishing touches on another Wheeler logging yarder. pable of maintaining and/ or rebuilding their Washington 208 Skyline CableSystem aggregate draglines. Their need was so great that they hired a private investigative company to do the search, and there was only one name that kept coming to the forefront time and time again… that name… Stuart Wheeler Sr. A business relationship was started, and since that time Wheeler and his company have refurbished and/or rebuilt 12 skyline draglines for Nelson River Construction. Finding used dragline

units that are still strong enough for refurbishing has become increasingly difficult, so currently Stuart and his team at Wheeler have gone back into their huge cache of Washington Iron Works plans and drawings and are building a new Wheeler/Washington 208 Dragline from the ground up. This unit will have all of the strengths and robustness of the original Washington 208 but will also be incorporating all of today’s modern conveniences, electronics and digital efficiencies. Stuart Wheeler Jr., or

‘Stuey’ as he is known to his customers and friends, spends most of his time on various job sites with the company’s vast list of customers. “I’m rarely in the office and shop. I spend most of my time on various job sites. We keep the cranes at a number of recycling yards in top operating condition. The company has had a team of mechanics working on the cranes for Seaspan almost from our first days in business. And then there is the startup of the new and refurbished machines… it keeps me really busy… but I love it.”

Extended Family But ‘business family’ can be more than just a biological relationship. Such is the case with the ‘family’ at Wheeler Equipment. For example, Robbie Dove, the company’s parts manager, and Ross Dowling, shop manager, both have a long and varied relationship with Stuart Sr. and his family, and the common cord that ties them all together… Washington Iron Works. In Robbie’s case, he and Stuart worked together at Washington Iron Continued on page 30

Page 30

Supply Post · supplypost.com

Works as well as at Vancouver Equipment. Then Dove became part owner of TriCan Machinery and he hired Stuart Sr. as a key heavy duty mechanic. As time passed, Stuart Sr. left TriCan to form his own company but when TriCan closed he was quick to contact Robbie and insist that he come and work for him. Robbie Dove had a big smile on his face when asked about that experience, “It’s been great. Kind of a wild ride, but great. Stuart has built a solid company and it’s wonderful to be a small part of it.” Dowling’s story is much the same. He worked for Stuart in the 1990’s, left to form his own company, did some contract work for Wheeler, and, “One

Parts Manager Robbie Dove studies the plans.

Robbie Dove and Shop Manager Ross Dowling are interregnal parts of the extended Wheeler Equipment family.

day out of the blue, Stuart called and said he needed a shop manager and asked if I was interested. I said yes… and that was a number of years ago. Stuart is a great guy to work for either as a supplier or as an employer.” Changes And The Future In business everything is always changing… almost on a daily basis. It has often been said that if a business if it is not changing and moving forward, it is slipping backward…there is no standing still. If you could ask all those associated with Washington Iron Works and TriCan Machinery in the past, they would likely agree whole heartedly. That is not the case with Wheeler Equipment Ltd.

Yes in the grand scheme of things they are a small player…but they are constantly evolving and moving forward using excellence in design and manufacture as well as exemplary customer service be their guide. They are adding new equipment, most recently a plasma cutter allowing them to fabricate many of the parts needed to maintain, refurbish or build-from-theground-up a wide variety of heavy-duty cranes, cable systems and logging equipment. Recently, Stuart Sr. and the Wheeler Equipment family-team finished and delivered a Wheeler/ Washington Super 88 Swing Yarder to Karl Boomer and his Vancouver Island-based Gordon River Contracting. Boomer was

extremely pleased when he picked up the keys and had the machine delivered to his Qualicum, B.C., operation. “Stuart and I worked very closely to achieve this result,” he stated. “This machine will be instrumental in keeping my family’s business in the forefront of logging in British Columbia. Stuart and his team have done a terrific job.” Also currently going through the ‘build’ process at Wheeler’s Delta, British Columbia, shop is a brand new, built-from-theground-up drag-line excavator for Manitoba-based Nelson River Construction. There are Wheeler refurbished machines working up and down the west coast of North America, in Alaska, Manitoba, Quebec and New Zealand. It’s an exciting time at the

CONTRIBUTED

Continued from page 29

RONALD MULLINS

Stuey Wheeler Jr. and Karl Boomer discuss the plans for another Wheeler logging yarder.

October 2019

Today, Wheeler Equipment Ltd. is flourishing with up to 20 employees and its own 20,000 plus square foot manufacturing facility on River Road in Delta, British Columbia.

Wheeler Equipment shop on River Road in Delta, British Columbia, but along with that excitement comes many challenges. The key element that made Washington Iron Works the giant success that they became was excellence. Excellence in planning, design, manufacturing, maintenance and customer service. These same principals of excellence have brought success to Stuart Wheeler Sr. and the Wheeler Equipment Ltd. team for almost four decades, and Stuart

Wheeler Jr. will see that this Legacy of Excellence is carried through well into the future. For further information on Wheeler Equipment Ltd. or to find out what they can build or maintain for you visit www. wheelerequipment.com or call either Stuart Wheeler Sr. or Stuart Wheeler Jr. at 1-604-882-9995. b Ronald Mullins is a Kelowna, B.C. based writer/photographer and is a regular contributor to Supply Post.

October 2019

Supply Post · Our Readers Are Your Buyers

Page 31

THOUSANDS OF NEW & USED EQUIPMENT, TRUCKS, TRAILERS, FARM EQUIPMENT AND MORE - IN YOUR BACK POCKET! Receive FREE Work Gloves with a Paid 3 Year Subscription!

SUBSCRIBE TO THE SUPPLY POST NEWSPAPER AND RECEIVE: • 12 issues per year • FREE work gloves with a paid 3 year subscription • Over 2,000 new & used units listed for sale or rent, totalling over $125,000,000 every month! • Stories about the people and news in your industry: Construction, Roadbuilding, Forestry, Aggregates & Mining, Trucking, Agriculture, and more.

Call 1-800-663-4802

or visit https://www.supplypost.com/subscribe to get started circulation@supplypost.com | 604-607-5577 | Fax 604-607-0533

www.supplypost.com

Page 32

Supply Post Â· supplypost.com

October 2019

FEATURED USED INVENTORY $45,000

$319,000

$129,300

$52,900

15E3267 - Langley

1E947 - Prince George

2E386 - Penticton

6C1348 - Quesnel

2015 Case SR200

2017 Link-Belt 210X2PHN

2017 Case CX37C

2014 Kenworth T800

400 hrs

5,530 hrs

350 hrs

$329,000

$419,900

500,992 km

$249,900

$92,500

37E4105 - Campbell River

2E396 - Penticton

8T2034 - Cranbrook

3E785 - Kamloops

2014 Tigercat L870C

2016 Tigercat 870C

2013 Kenworth T800

2016 Tigercat 630E

8,200 hrs

4,693 hrs

600,189 km

6,504 hrs

$310,000

$32,000

$59,000

$210,000 $419,900

5E919 - Williams Lake

15E3242 - Langley

15E3228 - Langley

15E3227 - Langley

2015 Tigercat H855C

2016 Kubota U17

2016 Case 921F

2013 Case 580SN 4

12,268 hrs

196 hrs

5,483 hrs

8,565 hrs

$179,500

$143,500

$97,400

$42,900

8E694 - Cranbrook

1E892 - Prince George

2014 John Deere 959K

5T4143 - Williams Lake

5E905 - Williams Lake

2014 Case 821F

2014 Kenworth T800

2017 John Deere 318G

6,757 hrs

310,637 km

42 hrs

11,153 hrs Brandon 204-728-6681 Estevan 306-637-2121

Burnaby 604-291-6431 Fort St. John 250-785-6105

Regina 306-569-9021

Campbell River 250-287-8878

Kamloops 250-374-4406

Saskatoon 306-931-1911

Castlegar 250-365-2807

Kelowna 250-769-2933

Swift Current 306-778-2390

Chilliwack (Parts) 604-701-0984

Langley 604-607-0300

Terrace 250-635-2292

Cranbrook 250-426-6205

Nanaimo 250-758-5288

Vernon 250-545-4424

INLAND-GROUP.COM

Dawson Creek (Parts) 250-784-0934

Penticton 250-492-3939

Whitehorse 867-668-2127

Prince George 250-562-8171

Williams Lake 250-392-7101

Delta 604-952-1280 Quesnel 250-992-7256

Winnipeg 204-694-3874

.com CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER

SECTION 2

.com OCTOBER 2019 · PAGE 33

Call Toll Free in Western Canada:

1-888-852-9021

FAST, FAST, FAST, FLEXIBLE FLEXIBLE FLEXIBLE AND AND AND RELIABLE RELIABLE RELIABLE FUNDING FUNDING FUNDING

FUNDING FUNDING AVAILABLE FROM FUNDING AVAILABLE FROM AVAILABLE FROM FUNDING AVAILABLE FROM

POWERSCREEN IN CONJUNCTION WITH TEREX FINANCIAL SERVICES IS PLEASED POWERSCREEN IN CONJUNCTION WITH TEREX FINANCIAL SERVICES IS PLEASED TO OFFER THE POWERSCREEN SEPTEMBER RETAIL FINANCING PROMOTION FOR POWERSCREEN IN CONJUNCTION WITH TEREX FINANCIAL SERVICES IS PLEASED TO OFFER THE POWERSCREEN SEPTEMBER RETAIL FINANCING PROMOTION FOR CREDIT QUALIFIED CUSTOMERS ON ALL POWERSCREEN CRUSHING, SCREENING, TO OFFER THE POWERSCREEN SEPTEMBER RETAIL FINANCING PROMOTION FOR CREDIT QUALIFIED CUSTOMERS ON OR ALLNEWER. POWERSCREEN CRUSHING, SCREENING, AND CONVEYING EQUIPMENT 2014 POWERSCREEN IN CONJUNCTION WITH TEREX FINANCIAL SERVICES IS PLEASED CREDIT QUALIFIED CUSTOMERS ON ALL POWERSCREEN CRUSHING, SCREENING, AND CONVEYING EQUIPMENT 2014 OR NEWER. TO THE POWERSCREEN SEPTEMBER RETAIL FINANCING PROMOTION FOR ANDOFFER CONVEYING EQUIPMENT 2014 OR NEWER. CREDIT QUALIFIED CUSTOMERS ON ALL POWERSCREEN CRUSHING, SCREENING, LOAN WITH STRAIGHT LOAN AMORTIZATON LOAN WITH 3-SEASONAL ANNUAL SKIP PAYMENTS AND CONVEYING EQUIPMENT 2014 OR NEWER. LOAN WITH STRAIGHT LOAN AMORTIZATON LOAN WITH 3-SEASONAL ANNUAL SKIP PAYMENTS

TERM INTEREST RATE PAYMENT FACTOR LOAN WITH STRAIGHT LOAN AMORTIZATON TERM INTEREST RATE PAYMENT FACTOR 24 MONTHS 0.00% 0.04167 TERM INTEREST RATE PAYMENT FACTOR LOAN WITH STRAIGHT LOAN AMORTIZATON 24 MONTHS 0.00% 0.04167 24 0.00% 0.04167 36 MONTHS 2.50% 0.02880 TERM INTEREST RATE PAYMENT FACTOR 36 MONTHS 2.50% 0.02880 36 2.50% 0.02880 48 3.25% 0.02218 24 MONTHS 0.00% 0.04167 48 MONTHS 3.25% 0.02218 48 3.25% 0.02218 60 3.75% 0.01825 36 MONTHS 2.50% 0.02880 60 MONTHS 3.75% 0.01825 60 3.75% 0.01825 48 MONTHS 3.25% 0.02218

FOR MORE INFORMATION CONTACT US TODAY... 60 MONTHS 3.75% 0.01825 FOR MORE INFORMATION CONTACT US TODAY... TEREX FINANCIAL SERVICES (CANADA CONTACT) FOR MORE INFORMATION CONTACT US TODAY...

TERM LOAN WITHINTEREST RATE ANNUAL PAYMENT FACTOR 3-SEASONAL SKIP PAYMENTS TERM INTEREST RATE PAYMENT FACTOR 24 MONTHS 0.00% 0.05556 (18-Payments) TERM RATE ANNUAL PAYMENT FACTOR LOAN WITHINTEREST 3-SEASONAL SKIP PAYMENTS 24 MONTHS 0.00% 0.05556 (18-Payments) 24 MONTHS 0.00% 0.05556 (18-Payments) 36 2.75% TERM INTEREST RATE 0.03858 PAYMENT(27-Payments) FACTOR 36 MONTHS 2.75% 0.03858 (27-Payments) 36 2.75% 0.03858 (27-Payments) 48 3.50% 0.02976 24 MONTHS 0.00% 0.05556 (36-Payments) (18-Payments) 48 MONTHS 3.50% 0.02976 (36-Payments) 48 3.50% 0.02976 (36-Payments) 60 3.90% 0.02446 36 MONTHS 2.75% 0.03858 (45-Payments) (27-Payments) 60 MONTHS 3.90% 0.02446 (45-Payments) 60 3.90% 0.02446 48 MONTHS 3.50% 0.02976 (45-Payments) (36-Payments)

60 MONTHS 0.02446 (45-Payments) Call Toll-Free in3.90% Western Canada

1-888-852-9021

TEREX SERVICES (CANADA Cell: CONTACT) DerrickFINANCIAL Small, Canadian Sales Manager (905)334-7613 Email: derrick.small@terex.com

TEREX FINANCIAL SERVICES (CANADA CONTACT) FOR MORE CONTACT US(905)334-7613 TODAY... Derrick Small,INFORMATION Canadian Sales Manager Cell: Email: derrick.small@terex.com Derrick Small, Canadian Sales Manager Cell: (905)334-7613 Email: derrick.small@terex.com TEREX FINANCIAL SERVICES (CANADA CONTACT)

Please note: The indicative rates posted above are available through Terex Financial Services (“TFS”) or its network of authorized funding partners to well qualified customers and are subject to change during theindicative promotional should anareunforeseen situation occurFinancial that creates volatility in the markets. Derrick Small, Canadian Sales Manager Cell: (905)334-7613 Email: derrick.small@terex.com Please note: The ratesperiod posted above available through Terex Services (“TFS”) orfinancial its network of authorized funding partners to well qualified customers and are subject to

changenote: during theindicative promotional period should anareunforeseen situationTerex occur that creates volatility in the financial markets. Program Summary: 1) Any 2014 or newer 2) The customer must be credit through TFS. 3) funding In order partners to have atounit for this promotion, Customer Please The rates posted abovePowerscreen availableequipment. through Financial Services (“TFS”) orqualified its network of authorized wellqualify qualified customers and are subjectmust to submit completed application to the TFS Credit Department along with required financial information by September 30, 2019. 4) Program through TFS. Customer must change aduring the promotional period should an unforeseen situation occur creates volatility in the qualified financial markets.TFS. Program Summary: 1) Any 2014 or newer Powerscreen equipment. 2)all Thethat customer must be credit through 3) In order to haveoffered a unit exclusively qualify for this promotion, 5) Downa payment varies according to creditworthiness. 6) Powerscreen hasrequired the rightfinancial to cancelinformation the promotion at any time.30, 2019. 4) Program offered exclusively through TFS. submit completed application to the TFS Credit Department along with by September Program Summary: 1) Any 2014 or newer 2)all The customer must(“TFS”) be creditorqualified through TFS. 3) funding In order partners to have atounit for this promotion, Customer Please note: The indicative rates posted abovePowerscreen are availableequipment. through Terex Financial Services its network of authorized wellqualify qualified customers and are subjectmust to 5) Downa payment varies according to creditworthiness. 6) Powerscreen has the right to cancelinformation the promotion at anysubject time. Additional terms and conditions apply. Offer cannot be combined with any other promotions. Program and rate change is through requiredTFS. to take delivery of submit completed application to the TFS Credit Department along with all required financial by September 4) without Programnotice. offeredCustomer exclusively change during the promotional period should an unforeseen situation occur that creates volatility in the financial are markets.30,to2019. eligible byconditions December 31,to2019. 5) Downequipment payment varies according creditworthiness. 6) Powerscreen hasother the right to cancelProgram the promotion at are anysubject time. to change without notice. Customer is required to take delivery of Additional terms and apply. Offer Powerscreen cannot be combined with 2) any promotions. and rate Program Summary: 1) Any 2014 or newer equipment. The customer must be credit qualified through TFS. 3) In order to have a unit qualify for this promotion, Customer must eligible equipment by December 31, 2019. Additional terms andapplication conditions to apply. Offer cannot be combined promotions. Program andbyrate are subject change is through requiredTFS. to take delivery of submit a completed the TFS Credit Department alongwith withany allother required financial information September 30,to2019. 4) without Programnotice. offeredCustomer exclusively eligible by December 5) Downequipment payment varies according31,to2019. creditworthiness. 6) Powerscreen has the right to cancel the promotion at any time. Additional terms and conditions apply. Offer cannot be combined with any other promotions. Program and rate are subject to change without notice. Customer is required to take delivery of Washing Systems To find equipment put more about Powerscreen products, visit our website. eligible by December 31, 2019.

To find put more about Powerscreen products, visit our website. To find put more about Powerscreen products, visit our website.

www.ForemanEquipment.com

www.powerscreen.com www.powerscreen.com To find put more about Powerscreen products, visit our website. www.powerscreen.com www.powerscreen.com

© 2019 Terex Materials Processing and Powerscreen are trademarks of Terex Corporation or its subsidiaries. *T&C apply. © 2019 Terex Materials Processing and Powerscreen are trademarks of Terex Corporation or its subsidiaries. *T&C apply. © 2019 Terex Materials Processing and Powerscreen are trademarks of Terex Corporation or its subsidiaries. *T&C apply.

Page 34

Supply Post · supplypost.com

October 2019

info@skreenquip.com

1-800-205-6633

DEALER FOR BC

TEREX FINLAY J-1160 JAW CRUSHER • Tier 4F Caterpillar C7.1140kW (188 hp) • 40” x 24” Single Toggle Jaw Crusher

NEW AND USED INVENTORY FOR RENT OR PURCHASE • 65’ / 80’ / Tracked Conveyors

• J-960 Jaw Crusher 36” x 24” / CAT C7.1

• 683 Screener 12’ x 5’ Double Deck, 14’ wide hopper

• J-1160 Jaw Crusher 40” x 24” / CAT C7.1

• 693+ Screener 20’ x 5’ Double Deck, 48” wide main belt

• J-1170 Jaw Crusher 28” x 44” / Scania DC09

• 863 Screener 9’ x 4’ Double Deck, 40” wide main belt

• J-1175 Jaw Crusher 30” x 42” / CAT C9

• 883+ Scalper 16’ x 5’ Double Deck Reclaimer

• C-1540 Cone Crusher 40” / Scania DC09

• Nordmann K-750 Compact Hook Lift Jaw Crusher

• C-1545 Cone Crusher 45” / Scania DC13 450hp

MORE NEW & USED STOCK WEEKLY!!

7801 Vantage Way, Delta BC

skreenquip.com

October 2019

Supply Post · Our Readers Are Your Buyers

First Production Run Of Bobcat E10e Mini Excavators Already Sold Out

BOBCAT

Bobcat announced that the first of the company’s new E10e zero tail swing (ZTS) 1 tonne batterypowered mini-excavators has come off the production line at the Bobcat compact equipment manufacturing plant at Dobris in the Czech Republic. Finished at 1:08 pm on 11th July 2019, the first E10e off the line has the Serial Number B4KL11001. It is headed to the Netherlands to the Authorised Bobcat Dealer, Apeldoorn-based InterTechno, where it will be used as a demo machine and is available for hire from Inter-Techno’s partner company, 123Machineverhuur. Doosan Bobcat has chosen the Dobris factory to produce the E10e for all markets worldwide, with the first machines to be sold in EMEA (Europe, the Middle East and Africa), with North America and then Asian markets to follow. The Netherlands,

Sweden, Germany, Austria and Norway are the first to be selected in Europe, in line with research that shows the highest demand is in these countries. Subsequent sales of the E10e in other countries will depend on the readiness of markets, dealers and the demand from customers. Increasing E10e Production The E10e is built on the same platform and produced on the same production line as the highly successful diesel-powered E08 and E10z mini-excavators. This line currently has a total capacity of 2000 machines a year and can produce the required mix of diesel and electric models as dictated by actual market demand. Jarry Fiser, Mini-Excavator Product Line Director, Doosan Bobcat EMEA, said: “We are very pleased that actual demand is higher than our original expectations and

production capacities. We prioritized Bobcat dealers in the Netherlands, the Nordic countries, Germany and Austria. These countries have very positive public acceptance of alternative power sources.” “The E10e is just the start of our journey in further expanding our portfolio in alternative power sources. In essence, all the components in the power train are made to measure and we are still adjusting the processes with our suppliers so that we can increase the production volumes when needed. The 2019 production capacity is already sold out and we are accepting orders for delivery in 2020.” The Bobcat E10e is the world’s first 1 tonne battery-powered mini-excavator, combining zero emissions, low noise and a width of just 71 cm, allowing it to easily pass through standard doors and in and out of lifts. It is therefore ideal not only for indoor demolition and basement digging, but also many other sites where this type of machine is required such as urban/city centre developments, night-time work and contracts in quiet zones such as hospitals, cemeteries, schools and so on. The E10e has a state-ofthe-art lithium-ion, maintenance-free battery pack with an advanced management system, designed to fit within the standard machine envelope to maintain the machine’s ZTS profile, matching all the parameters and dimensions of the standard diesel-powered E10z mini-excavator. Based on customer studies, Bobcat has optimized the battery pack to provide capacity to match typical work patterns. The E10e can therefore be operated for up to four hours on one charge. By using an optional external 400V supercharger, it can be recharged to 80% of its capacity in less than two hours. As a result, the E10e can operate throughout a full working day when used with normal work breaks. The battery can also be fully recharged overnight by using the on-board charger from a standard 230 V grid. b Source: Bobcat

Page 35

WE SELL WHAT WE KNOW & WE KNOW WHAT WE SELL©

SALES • RENTALS • PARTS OFFICE: 780-463-7077 | CELL: 780-887-7123 email: grant@groundw.com • EDMONTON • CHILLIWACK (604) 991-9779 • SASKATOON • WE SHIP ACROSS CANADA 616 DOUBLE DECK CAT 4.4 ENGINE - 3 PRODUCT CONVEYORS BALL DECK - REMOTE TIPPING GRIZZLY & FEED SPEED

NEW 616 DIESEL SCREENER

NEW!

NEW MINYU 200HP CONE

USED TELSMITH SBS 44 CONE

NEW 200 HP HIGH SPEED CONE - TOUCH SCREEN ADJUST & CLEARING INC. HYD. TANK, PUMP & COMPLETE LUBE SYSTEM.

2012 SBS44 – 300 HP CONE – 9900 HRS INC. LUBE TK., COOLER, & HYD . PACKAGE INC. COMPLETE CONE INSPECTION

RENTAL

DOPPSTADT 3060K SHREDDER USED 2015 DOPPSTADT 3060K - 1700 HRS - BIO-POWER - 42 SHAFT TEETH, 495 HP MERCEDES TIER III, MAGNET, HAND HELD REMOTE OPERATION ******** 6 MONTH OR 500 HR WARRANTY *********

USED 2014 POWER VAN 53’ TANDEM AIR RIDE, DOUBLE WALLED DIESEL TK SWITCH GEAR, INC. 300HP & 150 HP. SOFT STARTS 10’ CAB/TINTED GLASS/A/C/HEAT/CONSOLE, CUMMINS 500 KW GENERATOR

30 X 42 JAW PLANT NEW 2018 MINYU 30 X 42 JAW – VGF WITH VARI-DRIVE – ELECTRIC PANEL INC. RUN-ON-LEGS – BOOSTER MOUNTS

NEW 36 X 100 LATTICE FRAME - TOP FOLD - WHEEL DRIVE, HYDRAULIC R&L - POWER CORDS

USED 72O DOPPSTADT TROMMEL

SCREEN MACHINE 514 TRIPLE

ONE OWNER - 1600 HRS- MERCEDES DIESEL PLUS MODEL - 5/8” DRUM - AUX HYDRAULIC.

2017 - 514 TRIPLE DECK - CUMMINS DIESEL REMOTE TIPPING GRIZZLY - 4 FOLD OUT CONV., RENTAL AVAILABLE.

FINANCING AVAILABLE O.A.C WWW.GROUNDWORX.CA

Page 36

Supply Post · supplypost.com

October 2019

Brandt Acquires Nortrax Canada The Brandt Group of Companies is pleased to announce that they have reached an agreement to acquire the businesses of Nortrax Canada Inc. and Nortrax Quebec Inc. (together, “Nortrax”), subject to due diligence and regulatory and other approvals. The landmark deal will unite all John Deere Construction & Forestry dealerships in Canada under the Brandt banner and deliver unprecedented access to Deere products, parts and support services to Canadian contractors. With the acquisition of the Deere-owned Nortrax locations in Ontario, Quebec and Newfoundland and Labrador, Brandt will own and operate 56 John Deere Construction & Forestry dealerships across Canada with an additional 30+ service points and will employ over 3400 people. “The addition of Nortrax’s impressive branch and distribution network gives us an unprecedented opportunity to offer customers anywhere in

Canadian contractors and will further establish the firm’s position as a premier privatelyheld Canadian company and the largest privately-owned John Deere Construction & Forestry dealership in the world. “Having a strong, privately-held, Atlanticto-Pacific-to-Arctic dealer will be a huge benefit to John Deere,” adds Nortrax President and CEO, Chris Holmes. The agreement is expected to close on October 25, 2019. b

Canada a consistent customer support experience, no matter where their projects take them.” says Brandt President and CEO, Shaun Semple. “We are very proud to deliver the quality products and support services that Canadian customers rely on for their success, every single day.” The acquisition will give Brandt a comprehensive retail footprint to supply Construction & Forestry equipment to Source: Brandt

Celebrating 10 Years! I would like to take this opportunity to thank all customers, past and present, for helping us achieve this milestone. It’s been an epic journey, and I want to thank each of you. Looking forward to providing an even greater level of Service to you going forward! We’re working harder, so you don’t have to! FOR SALE: PKG OF GOOD USED/REBUILT CAT HAUL TRUCK COMPONENTS Call For Details • TIRES: 16.00R24, 29.5R25, 30.5 X 32. • REBUILT 3304/3306 ENGINE PARTS/BLOCKS, CAT LOADER AXLES AND FINAL DRIVES JUST ARRIVED CONSIGNMENT SALE: 966D/E/F HYDRAULIC QUICK ATTACH

Kamloops, BC., CALL GRAHAM: 250-851-1100 | 250-573-4181 (Office/Fax) | bgparts@telus.net www.bgparts.ca

REDUCE COSTS - INCREASE PRODUCTIVITY

NEW & USED EQUIPMENT FOR SALE OR RENT

CALL 2018 KEESTRACK H6 CONE CRUSHER, Hybrid cone crusher with full plug-in and plugout capabilities, removable genset, max feed size 215mm. C.S.S 6 to 44mm. Large 3-deck screen with a 8.1m2 screening area on each deck, 45” cone, 300 HP, 400 tph.

CALL 2019 EDGE FTS75 FEEDER TRACKED STACKER Robust tracked hopper feeder. 75’ conveyor. 5’ x 13’ / 7m3 hopper. Discharge heights up to 43’10”. Conical stockpile up to 5271 yrds3. Stockpile 1,000+ tph. Mulch and aggregate model options available.

EW D N USE &

KEESTRACK S3 & S5 STACKING CONVEYORS New and Used S3 (60’) and S5 (75’) Stackers. Robust design with loading sensing hydraulics. Great fuel economy. Feed capacity: 250 - 500 tph. Stockpile: 1,200 - 15,000 tonnes. Discharge heights: 22’ - 31’.

CALL 218 KEESTRACK C6 FINISING SCREENER Double and triple deck models available. 8.1m2 screening surface on each 15’ x 6’ deck. 4-split version. 400 tph. 8m3 hopper. Load sense piston pump technology. Auto sequential start. Best precision screening.

E US

CALL

1-855-305-0152

E US

CALL

$535,785 2017 NEUENHAUSER 2F SUPER SCREENER 2 Fraction tracked star screener for sticky applications, 7m3 Hopper, Low fuel consumption, Quick-changeable screen decks and variable star speed control.

INFO@FL-MACHINERY.COM |

2018 EDGE TRT 622 TRACKED TROMMEL, 2m x 6m (6’ x 22’) drum, 180 degree radial fines conveyor w/ variable discharge height, discharge height up to 4.9m, extra wide collector belt, smart loading sensing, eco-power saving mode, 5m 3 hopper, versatile……POR

1.855.305.0152 FRONTLINE-MACHINERY.COM 1.855.305.0152 FRONTLINE-MACHINERY.COM FRONTLINE-MACHINERY.COM

October 2019

Supply Post · Our Readers Are Your Buyers

Page 37

QUALITY NEW & USED AGGREGATE PROCESSING EQUIPMENT FOR SALE OR RENT

SPECIALTY PRICING AVAILABLE NOW!

JCI KODIAK CONES IN STOCK, Available for immediate delivery 200 thru to 500 HP. Choice of liners and drive configurations ...........................................................CALL FOR SPECIAL PRICING.

2015 MORMAK BUILT MVP450 PLANT Cone was rebuilt with recent inspection showing ,excellent condition. Off plant infeed conveyor with magnet included, Twin 200 HP cone drive motors. ............................................$385,000 OBO.

CONVEYORS IN STOCK! 60’, 80’, 100’, 125’, 150 ................. ................................CALL FOR FULL DETAILS AND PRICES.

JCI HORIZONTAL SCREENS IN STOCK, Available for immediate delivery 6’ , 7’ and 8’ models in two & three decks. Finishing or scalping configurations................................................CALL FOR SPECIAL PRICING.

KPI 2500 VSI. 2500 VSI Crusher, On Chassis, Fully Self Contained, Discharge Conveyor, completely re-conditioned. ...................................FOR SALE OR RENT!

SANDVIK QH440 TRACK CONE CRUSHER, Cat C13, 440 HP .....................................................FOR SALE OR RENT!

COMPLETELY REBUILT JCI KODIAK K300 CONE PLANT. On plant switch gear. ............................FOR SALE OR RENT!

2008 ASHROSS 1260C PORTABLE DRIVE-OVER TRUCK UNLOADER. Self-Contained w/ JD 175 HP Diesel, 60" Discharge Belt, Can Handle Belly & End Dump Trailers. Ready to Work. Call for Details. .... SALE OR RENT, $175,000.

SALES CONTACTS: William Thompson Hugh Porter 780-474-8082 604-657-7167 Willie@chieftainequipment.com hugh@lonetrack.ca

Equipment (2017) Ltd.

Page 38

Supply Post · supplypost.com

October 2019

Call: 403.463.3278 Since 2014, Alberta Unemployment Rate Geoff@MachinerySupply.ca Increases While Texas Rate Drops

EQUIPMENT FOR SALE 2005 CEDARAPIDS MVP380 CONE CRUSHER In/out chassis, hydraulic leveraging package, 300hp 460v motor, 36” in-feed, 42” discharge. Rebuilt in our shop: seats resurfaced, wear liner replaced, new bearings, much more. Call Geoff for details.

2019 THOR GLOBAL LPT150 800 CONVEYOR For sale or rent, 36” x 150 telescopic conveyor with on-board software scale, fully programmable, wireless remote control. Call for info and availability. CEDARAPIDS 2248 JAW PLANT Fully rebuilt Cedarapids 2248 Jaw plant. New bearings and gears, pitman, fully inspected. 6x20 deck, medium scalper screen, new motors for jaw and screen. Call for more photos and info. 100 East Lake Drive, NE Airdrie, AB T4A 2K1

www.MachinerySupply.ca

While both Alberta and Texas were hit hard by the oil-price drop in 2014, the Texas unemployment rate has dropped while the Alberta rate has risen, finds a new study released by the Fraser Institute, an independent, non-partisan Canadian public policy thinktank. “Some people in Alberta continue to blame the province’s comparatively high unemployment rate on the 2014 oil downturn, but Texas dealt with similar price drops and has done a much better job creating an environment where workers can prosper,” said Steve Lafleur, senior policy analyst at the Fraser Institute and co-author of Lessons from the Lonestar State: Comparing the economic performance of Alberta and Texas. The study finds that Alberta’s annual unemployment rate was lower than the Texas rate every year from 2004 to 2014.

But after the 2014 drop in oil prices, the situation reversed, with Texas enjoying a lower annual unemployment rate—in some years, a much lower rate—than Alberta. For example, Alberta’s unemployment rate peaked at 7.2 per cent in 2016 while the Texas rate stayed below 5 per cent from 2014 to 2018, the latest year of comparable data. There are many reasons why unemployment has increased in Alberta and dropped in Texas. But it’s worth noting that the two jurisdictions have taken markedly different approaches to government policy. Alberta has run budget deficits fuelled by government spending while Texas has run surpluses every year but one since 2014. Alberta raised taxes (Alberta’s top provincial income tax rate is now 15 per cent, Texas does not have a state-level personal income tax) and increased Source: Fraser Institute

RLC AGGREGATE EQUIPMENT FOR SALE · RENT · OR RENT TO OWN Call 1-833-706-9458 | Email: info@rlcagg.ca

Used KPI/JCI 36x150 Super Stacker Nice Unit.

6’x10’ Control Tower 25000BTU A/C Tinted safety glass & shades, c/w all hardware to install in van

New & Used Power Vans Call for more info

JP 36x80 & 36x100 Radial Stacker Kubota engine, Full Hydraulic, CEMA C.

Portable Splitter Chute Lined with AR 400, UHMW in chute.

JP 14 Yard Skid Feeder (Grizzly Opt.) Vulcanized belt, belt cleaner, Dodge TA4 20 HP

POWER VANS/GENERATORS/SCREENERS: New Build, 27-Stations, 400 HP Soft-Start, 6x10 Tower, 1,266 Gal. Enviro Tank, No Gen Set................................................ POR 2007 53’ Tri Axle Power Van, 33-Stations, 400 HP Soft-Start, 6x10 Tower, Large Cap. Enviro Tank ............................ $205,000 2007 53’ Power Van, 32-Stations, 400 HP Soft-Start, 6x8 Tower, 1,266 Gal. Enviro Tank, 500kW Gen ...............................SOLD Un-used 2015 100kW Van c/w U-Haul Trailer & Used 2015 Cummins 150kW Power Van Electrical...................................... POR Used 2014 Total Rebuilt Cummins 600kW & 2017 Cummins 600kW 3,640 Hrs. & 2013 CAT C-18 600kW, 7,555 Hrs............. POR 2010 Fab-Tec 5x16 Contractor Plant c/w 150kW Gen Set w/ Electrical (3) Extra Plugs .......................................................... POR New P7203 Cedarapids Screen Plant & Superior 4x8 Dewatering Screen (used 1 month) ................................................... POR

regulation. “Government policy has damaged Alberta’s investment climate, and workers in Alberta are paying the price,” said Ben Eisen, senior fellow in the Fraser Institute’s Fiscal and Provincial Prosperity Studies. “While external factors have played a role in Alberta’s struggles, the superior performance of Texas over the last few years underscores the importance of pro-growth policies in Edmonton,” Lafleur said. The Fraser Institute is an independent Canadian public policy research and educational organization with offices in Vancouver, Calgary, Toronto, and Montreal and ties to a global network of think-tanks in 87 countries. Its mission is to improve the quality of life for Canadians, their families and future generations by studying, measuring and broadly communicating the effects of government policies, entrepreneurship and choice on their well-being. To protect the Institute’s independence, it does not accept grants from governments or contracts for research. b

QUALITY AGGREGATE EQUIPMENT

Plug into you track screener. All HYD. JP 36x60 & 42x40 Radial Stacker, belt scraper, feed hoper, (optional hyd. Raise/lower, hyd. Lift axle, hyd. Drive motor).

24” Landing Pads for Heavy Loads $25 EACH

JAW PLANT/CONVEYORS/FEEDERS/SPLITTER CHUTES/PARTS: New JP Radial Stackers, 36x40, 36x60, 36x80, 36x100, 42x40 ............................................................................................... POR New 2018 KPI/JCI 33-36150 Super Stacker & Used 2018 KPI/JCI 36x135 Super Stacker ........................................................... POR New JP Triple Stack Conveyors, 36x60, 36x70, 42x60, 42x70.................................................................................................. POR Used Radial & Transfer Conveyors, 30x50, 30x60, 36x50, 36x60, 36x75 & Kolberg 36x70 Roll Pack ................................... POR New JP 14 Yard Skid Feeder (Hydraulic Grizzly Option) ........................................................................................................... POR 2005 & 2007 30 cu/yd. Surge Bin (refurbished & painted) ..................................................................................................... POR Un-used 2017 Hikon 3033-12 Feeder with Grizzly ..............................................................…………………………………………….POR

View Complete Inventory at www.rlcaggregateequipment.ca

October 2019

Supply Post · Our Readers Are Your Buyers

Wheeler Delivers First WheelerWashington 88 Yarder

Wheeler Equipment Ltd., located in Delta, British Columbia, Canada recently announced the delivery of the first Wheeler-Washington 88 Forestry Yarder to Gordon River Contracting, headquartered in Chemainus, British Columbia. Karl Boomer, President of Gordon River Contracting was on hand at the Wheeler manufacturing facility as Stuart Wheeler Jr. handed him the keys to his company’s newest equipment acquisition. “We have worked very closely with Stuart Wheeler Sr. and the team here at Wheeler to get to this point,” stated Karl Boomer.

He added, “We are looking forward to this machine making a tremendous difference for our company and our clients on Vancouver Island.” In many regions steep slope logging is not a new forestry harvesting technique but is making a strong resurgence of late. In British Columbia, as in many other areas of the world, the easy-to-get-to timber has been harvested and now to keep the mills supplied, forestry harvesting companies need to look for better and more effective ways to get to the timber that is readily available in the more Source: Wheeler Equipment

Tidewater Equipment Joins CASE Construction Equipment Dealer Network Tidewater Equipment has joined the CASE Construction Equipment dealer network and will represent the manufacturer in 42 counties spanning western and southern Georgia. The dealer will sell and service CASE equipment out of its Tifton, Smithville and Pinehurst locations, serving the landscaping, general construction, forestry and agri-

cultural markets. “The southeast is growing, it’s critical to the construction market now and for years to come, and Tidewater provides us a strong and established partner to support CASE equipment owners in the region,” says Brian Weisbaum, director of dealer development — North America, CASE Construction Equipment.

HEAVY EQUIPMENT PARTS & REPAIRS FULL REPAIR FACILITY-FIELD SERVICE

Boom pins and bushings Excavator parts Transmissions, engines Hydraulic pumps, motors Servicing all major brands CAT, HITACHI, VOLVO, KOMATSU, DEERE, HYUNDAI

INTERIOR DIESEL LTD. Parts, Service and Sales for Mining, Forestry & Construction.

Call today!

rugged or mountainous areas. Wheeler Equipment Ltd. has been very successful in the rebuilding and refurbishing of forestry yarders and gravel dragline machines but with recent advances in materials and technology they are advancing to building new units from the ground up. This new Wheeler-Washington 88 Forestry Yarder is an example of this. “We have taken the best from the older Washington yarders,” stated company COO Stuart Wheeler Jr., “And then we work closely with our clients, adding the latest advances in safety, efficiencies, materials and technology and this new 88 is the result. These new Wheeler yarders are stateof-the-art.” Wheeler Equipment Ltd., located in Delta, British Columbia, Canada, is a heavy equipment manufacturer and refurbisher serving a wide variety of local, national and international clients. For more information on the company contact Stuart Wheeler Jr. at 1-604-882-9995 or visit www.wheelerequipment. com. b

250.374.3443

2045 W Trans Canada Hwy, Kamloops, BC, V1S 1A7

“They’ve fully embraced our work by supporting causes we believe in such as Team Rubicon, and the leadership, sales and service staff give CASE a new and reliable partner in the region.” “CASE is an iconic American brand with a strong history that builds upon proven equipment lines and continuously finds new and innovative ways to provide value and efficiency,” says Jackie Fleetwood, general manger, Tidewater Equipment. “This is a great new expansion for us, and will allow us to better serve forestry, construction and agricultural operations throughout our territory with a more complete line of equipment to spur their business growth.” Tidewater Equipment was founded in 1947 as a manufacturer of timber harvesting equipment, and now serves as a major equipment dealer in the region. To learn more about Tidewater Equipment, visit tidewaterequip.com. For more on CASE, visit CaseCE.com. b Source: Case CE

Page 39

Box 279 R.R. #4, Saskatoon, SK Office: 306-244-4533 Email: contact@hikonindustries.com

See all our current inventory at www.hikonindustries.com

Get Ready for Fall In-Stock Inventory 3650 Transfer Conveyor 3660 Transfer Conveyor 4250 Transfer Conveyor 4260 Transfer Conveyor

3675 Radial Stacker (2 New, 1 Used) 4275 Radial Stacker 3660 TRI-Pack 3670 TRI-Pack 4260 TRI-Pack 4270 TRI-Pack P6203 Screen Plant 4240-16 Portable Feeder

Why choose Hikon Industries? Proudly Manufactured In Saskatoon | Rock Solid Reliability | Minutes From Saskatoon International Airport | Easy Access from Yellowhead Highway 16 | Established In 1994 | Dedicated Quality Service For The Aggregate And Frac Sand Industries | Customer Expectations Met Or Exceeded

Built Tough! We Manufacture Rock Solid Equipment

Page 40

Supply Post · supplypost.com

October 2019

Used ELRUS Feeder with Hydraulic Side Dump Grizzly, 15 cu. yd. Self-relieving Hopper, AR Plate Lining, 36" Removable Feeder Cartridge, 42" Delivery Conveyor, Tandem Axle Walking-Beam Suspension.

Used Cedar Rapids Surge Bin Portable Load Out Bin with 11'x12' hopper, 42" Pickup Conveyor and 42" Discharge Conveyor on Single Axle Chassis

UM330 Rebuilt Allis Chalmers 8 x 20 – 3 Deck Screen ,2 new carry decks , New side panels , 4 new bearings , 1 new bearing housing, New inlet and discharge chute

USED Cone chassis with reconditioned Allis H4000 300 HP Cone New ASRi 2.0, 36" Overhead Feed Conveyor, 42" Return Conveyor, Tramp Metal Protection on Triaxle Chassis.

USED ELRUS 2015 Screen-Jaw Plant with 2236 Jaw, 6x16' 2-Deck Screen, 60" Reversible Under-screen Conveyor, Hydraulic Levelling on Triaxle Chassis

Used 2007 Metso Lokotrack LT200 hp Mobile Cone Crushing Plant Nordberg HP200 Cone Crusher 210mm Feed opening Cat C13 415hp Engine

NEW ELRUS Rip Rap Plant. Makes up to four products simultaneously. 10 Cu yd Hopper, Hydraulic Side Dump Grizzly, 54" V.G.F., 36" Side Discharge Conv

Used Cone Chassis w/ Allis H4000 Cone, 36” Feed Conveyor, New ASRi ll computer, Tramp Metal Protection Magnet, 42” Return Conveyor and Hydraulic Levelling System

USED Edge TRM622 6x22' Trommel Screen, Hopper with Extensions and Tipping Grid, 48" Feed Belt, 60" Collection Conveyor, 42" Oversize Conveyor with Impact Bars

USED Sandvik QJ341 3048 Track Jaw Crusher, CAT C9.3 Tier 3 Acert diesel motor, 9.35m3 Hopper capacity, 43" x 13' Vibrating speed grizzly, 26" foldable side discharge conv, Heavy Duty Tracks w/ wireless controls

NEW ELRUS 53' Control Trailer Package w/ 6x10' Tower with Platform, Trailer to Tower Stairs, Roll Down See Through Blinds, 17' Partitioned Generator Room, Folding Ground to Trailer Stairs with Platform and Railings

Sandvik QJ341 3048 Track Jaw Crusher, 30’’ x 48’’ Portable Track Jaw Crusher Basic equipment includes: •Feed hopper with hydraulically foldable side walls 9.35m3 capacity •Vibrating grizzly feeder 43” x 13’

The Home of Genuine pitboss equipment TM

ELRUS MS612 3 Deck Multi Sloped Screen, 42 Screen Feed Overhead Conv, 42 x 34’ Underscreen Conv, Two (2) 36 x 12’-6” Cross Conv and Hydraulic Levelling

NEW Superior 36” X 80' Portable Radial Stacking Conveyor Motor, 30 HP 1800 RPM TEFC V-belt drive (90% fines, 10% spherical lumps 7” minus)

1-877-979-7741

36” X 136' Low Profile TeleStacker® Conveyor, 40/30 HP 1800 RPM Motor, 800 STPH of 100 PCF material capacity

NEW ELRUS 6'x20' – 3 Deck Screen Plant w/ 42 OH Feed Conveyor, 60 Under Screen D/C Conveyor, 2 or 3 Cross Conveyors

www.elrus.com

CLASSIFIEDS

TO PLACE AN AD, CALL 1-800-663-4802 OR VISIT WWW.SUPPLYPOST.COM /ADVERTISE/CLASSIFIEDS ATTACHMENTS

OCTOBER 2019 · PAGE 41 2014

CAMPS

Elrus/Sandvik

CH550, 600 hrs. This cone has recently been rebuilt back to factor y specs. No expense was spared

ALLU SMH 3-23 Screener/

Cr ushers, Pulver izers, Shears! Own or Rent. Bucket 92” width w/ vanedequipment.com Volvo Lugging Very Good PHONE: (604) 888-9020 Condition. $24,000 PHONE: (877) 255-9293 Western Heavy Equipment Crusher Wheel Loader

RICK: (306) 981-3475

BUSINESS FOR SALE

GRAVEL PIT AND FARM FOR SALE Working Gravel Pit 13.5 Acres – Light Industrial, road gravel & winter sand. Working Hay Farm 52 Acres – ALR, c/w 7 yr. old custom-built home, 2 bay commercial truck shop, barn & hayshed. $1.2 3 7 4 D C a t e x c a v a t o r mil. Quesnel, BC thumb w/piping, clamping. Chuck Sales Weldco Beales thumb w/ CELL: (250) 983-1141 PHONE: (250) 747-8387 new cylinder and all piping. Located in Dawson City YK. $15,000 EMAIL: rjr5@icloud.com

BILL 13 ROAD BUILDING CONTRACT FOR SALE: Predictable, stable income to help you weather the industry’s highs & lows. Volume Independent 5km lineal per year with potential to do more. Drilling & Blasting required. Area: 330 Cat frost bucket, new Upper Sunshine Coast of condition, used for 4 hours. BC. Why are we selling? $2,500.00 Can. We bought another Bill 13. PHONE: (604) 485-5772 EMAIL: rjr5@icloud.com

TRANSPORT BUSINESS FOR SALE Small localized TURN KEY TRUCKING COMPANY For Sale. This 30-year-old business serving a very specialized market in the Fraser Valley comes with a good profit margin; client list and good equipment suited to doing the job well. Owners wanting to retire.

1-833-219-5599

Barco 22-24 Man Camp Barge Model 99 for Sale. Comp. rebuilt inside & out in 2018. Upgrades include hull, accommodations, water systems, furniture, bedding, flooring, and much more. Surveyed, Certified, and Insured in April 2019. Complete list of upgrades and Marine Sur vey available upon request. Over $1.2 Million invested in upgrades and enhancements. Asking $1,500,000. Located in Campbell River, BC Challenger Enterprises Ltd. ap@challengerenterprises. ca PHONE: (250) 591-0626

Working Landscape Rock Quarry for Sale. 15 Year lease - renewable, 190.5 HA, 3 types of landscape rock, 4 work areas, Area 1 Slate Quarry Site—Grayish Blue slate, no rust. Permit allows for 1600 tonnes/ year. Area 2 River rock Quarr y Site—Multi colored rock, 1/2 - 6 inches in size. River rock is known as Rainbow Rock. Permit allows for 2000 tonnes/ year. Area 3&4 Red Rock Quarry Site—Red Argillite. Beautiful Rock. The permit allows for 2000 tonnes/ year per site. Rock can be stripped with an excavator CONCRETE EQ. using a ripper tooth. The material can be crushed on or off site. Equipment and inventory is negotiable for additional cost. Partnership Fa i l u r e F o r c e s S a l e . Located in South Eastern British Columbia. $589,000. JCB Endeavours Ltd N e a r n ew Fa s t - Way jcbendeavours@gmail.com “Super-Sacker” & Auger, PHONE: (403) 894-5633 10,000 lbs. capacity c/w Looking for heavy equip- load cells & controls, Auger ment or truck par ts? with 460V motor, $25,000 SupplyPost.com has over OBO. 36,000+ new, used, and HUGH: (604) 657-7167 reconditioned PARTS listed for sale, with new parts Equipment For Sale Online being added every day! – We have thousands of Search by make or part equipment & trucks for sale at SupplyPost.com! Log on number. Start here: https://www.supplypost. today... www.supplypost.com com/parts

AMIX GROUP SURPLUS Jim Murphy • 1-844-505-4105

• Bilge Water Pumps, 25 HP, 575v, 24amp, 60hz, 3-Phase .......................................................................... SALE • Bilge Water Pumps, 30 HP, 575v, 28amp, 60hz, 3-Phase .......................................................................... SALE • Sutorbilt Rotary Blower - Model # 1437-5111 .... SALE • Mitsubishi Generators, 600v, 163amp, KVA 168.8 SALE • CAT Powered Leroy Summer Generator, 600v, 3-Phase .......................................................................... SALE • 18v92 Detroit Diesel Engine w/ Blower................. SALE • 18v92 Detroit Diesel Engine w/ Blower w/ Hyd. Pwr. Pk..................................................................................... SALE • Large Rollers, Used to Move Ships-Houses-Large Equipment ..................................................................... SALE • 72” HD Digger Bucket ............................................... SALE • 85” HD Clean-up Bucket........................................... SALE • 530 Doosan Quick Coupler Exchange .................. SALE

To see all our surplus inventory, visit SupplyPost.com

2016 Isuzu NRR single axle c/w TS2050 concrete line pump Very low mileage truck. Pumps in good working order c/w near new concrete hose. Ready to work. $65,000 OBO HUGH: (604) 657-7167

CONVEYORS New & used conveyors, from 20’ to 120’, radial or transfer conveyors, quick delivery. TYALTA INDUSTRIES INC. PHONE: 1-800-960-9939

CRUSHERS

on the rebuild! - All internal components are new. - All pumps and hoses are new. - Electric Motor was purchased new and upgraded to 500HP this year. - ASRI was recently updated. - Backless liner (liner can be changed in five hours). - In feed and out feed conveyors. Work orders are available and this is a one owner cone. Located in Saskatchewan. POR. Vernon, BC Okanagan

Quality

Control Ltd adamh@okqc.ca PHONE: (250) 803-2930 2013 Komplet 60/40. 240 hrs. $119,900. JCB Endeavours Ltd jcbendeavours@gmail.com PHONE: (403) 894-5633

2012 Cedarapids JP 30-54 200hp. 54”-20’ VFG Feed, 50hp. 60” discharge conveyor, 20hp. Hydraulic landing gear.M-2446-0412 Refurbished 2018. $525,000. Vernon, BC Westridge Quarries Ltd fred@westridgequarries. com PHONE: (250) 470-2871

For all your crushing equipment requirements. Sales, service and parts MORMAK EQUIPMENT PHONE: (250) 542-7350 VERNON, B.C.

2010 Metso LT96 Jaw Crusher, New Jaw Plates, 36x24 Jaw Size, Good C o n d i t i o n , 3 , 5 0 0 H r s. $280,000. Langley, BC Norstone Excavating. gerrardbwhite@gmail.com PHONE: (604) 866-0482

ZF TRANSMISSIONS & DIFFERENTIALS

- REBUILDS & REPAIRS Moxy, Terex, Volvo, John Deere, Case - specializing in off-highway applications - quality and cost-effective work - on-site testing and troubleshooting - available 7 days a week

Also offering on-site repairs and servicing of all makes of construction and agriculture equipment.

Dolphin Mechanical Services Ltd. Langley, BC - Call Eric 604-314-8032 dolphinmechanicalservices@telus.net

Page 42

Supply Post · supplypost.com

BANNING EQUIPMENT LTD

DOZERS

8901 Penn Road, Prince George, BC Phone: 250-564-7226 · Fax: 250-564-7233 Email: scott@banningequipment.com EQUIPMENT FOR SALE

2017 - S590 Skidsteer - Bucket ....................................................$49,500 2013 - 938K Wheel Loader - Bucket/Forks ................................$127,500 2006 - EC210 Processor - Volvo ....................................................$65,000 2005 - TK741 Feller Buncher - HF221 22” head...........................$65,000 2004 - D6N LGP Crawler Cat - 6-way Blade ..............................$115,000 2001 - 730A Feller Buncher Prentice............................................$85,000 1999 - D7R XR Crawler Cat Double A/tilt, ripper ......................$145,000 1998 - IT28G Wheel Loader Cat.....................................................$45,000 1993 - IT24F Wheel Loader Cat .....................................................$39,500 1969 - 950 - Cat Wheel Loader w/bucket.....................................$22,500

DOZER ATTACHMENTS

Blade - D8N-R Double angle tilt & C-Frame ...............................$25,000 Brush Rake - D6 - Destec ................................................................$6,000 Brush Rake D7R 144” Adjustable ...................................................$8,500 Counterweight - D6T Drawbar Parts .............................................$2,500 Rear Hitch & Counterweight D6T ...................................................$2,900 Ripper - D6N - Ripco MS..................................................................$7,500 Ripper - D7R - Cat Multi-shank .....................................................$20,000 Ripper - D8N-R-T Ripco Multi-shank- No Controls ...................$25,000 Ripper - D9N-R-T Cat Multi-shank - No Controls ......................$25,000 Ripper Shank D8R/N .........................................................................$2,750 Winch - D5H - Cat ...........................................................................$12,000

WHEEL LOADER ATTACHMENTS

Blade Snow IT28G, 930G, 420D Hyd Angle *New* ....................$12,000 Blade Snow 930K/938K WBM 12 ft. Fusion Hyd/Ang ................$16,000 Broom - IT28G - BP25 100” Broom *Rebuilt*..............................$10,500 Bucket - IT28G/930G - Cat Q/A 100 in.............................................$4,500 Bucket - 938H Cat Fusion Q/A - 106 in .............................................P.O.R Bucket - 966G - 125” GP……*New* .............................................$7,000 Bucket - 966G - WBM 120” 7-1/2” yard T/A..................................$8,000 Coupler - 980H - Imac Q/C hydraulic..............................................$5,900 Forks - IT28G - IT Q/A 72” ................................................................$4,500 Forks - 930K,938K Cat Fusion - Q/C 54”..........................................$7,000 Forks - 938G - WBM Q/A 46” ...........................................................$4,000 Grapple - 930H - IT Q/A EFI Almost New .......................................$5,000 Grapple Bucket - 950H Pin-on Cat..................................................$6,000 Grapple - 966G Cat Log grapple WBM ..........................................$7,500 Jib - 930G/H, Cat Fusion Lugging ....................................................$4,500 Jib - 938K - Fusion Q/A .....................................................................$4,500 Tire - IT24F/IT14F - 17.5 x R25 40% Michelin (4) ...........................$2,750 Tires - CS56 23.26” Goodyear Diamond Tread (2) ....................... $3,500

MOTOR GRADER ATTACHMENTS

Blade Snow 140H/140M Hyd. Lift & Angle WBM ......................$15,000 Lift Grp. Front - 140G/H/M - Cat.......................................................$6,000 Lift Grp. Front - 14H/14M - WBM ....................................................$8,500 Snow Wing -140M/160M - WBM ripper mnt. *New* ...............$12,500 Snow Wing - 140M/160M - WBM Low Pro ...................................$8,500 Snow Wing - 140H/160H - WBM Lo-Pro........................................$4,000 Ripper - 14H - Ripco MS...................................................................$6,500 Wobbly Wheel - M/Grader 13 Wheel Blaimore .........................$14,000

SKIDSTEER ATTACHMENTS

Auger 30C Skidsteer High Torque Unit Drive................................$2,500 Blade - 246C - AMI 108” snow *New*..........................................$4,610 Bucket HD LowPro Skidsteer 72” edge..*New* ..........................$2,025 Bucket RD LowPro Skidsteer 78” tooth..*New* ..........................$1,650 Fork - SS - AMI 48” 4200 LB HD Q/A…...*New* ..........................$1,065 Jib - Skidsteer 2000 lb Cat Lugging ................................................$1,850 Sweeper S570 - Skidsteer sweeper...............................................$2,750

BACKHOE & MINI EXCAVATOR INVENTORY

Bucket - 35 Series - Cat 24” EFI Q/A ..............................................$1,850 Bucket - 301 Cat 10 Series - EFI Q/C 12” .......................................$1,650 Bucket - 303 Cat 30 Series - EFI Q/C 18” .......................................$1,650 Bucket - 303.5 - EFI 18” Q/A Cat 2014.............................................$1,850 Bucket - 50 Series - 305 EFI Q/A 24” ..............................................$1,850 Bucket - Bobcat - 20” Digging Q/C....................................................$800 Bucket - 420E,F - 42” Cat Q/C Cleanup ..........................................$1,750 Hammer NPK GH-07 Mini Ex Breaker Inc/chisel tool .................$4,850 Thumb - 35 - Hydraulic thumb…*New* ........................................$1,950

EXCAVATOR ATTACHMENTS

Brush Rake - 200 - 60” WBM Q/A…..*New*................................$6,000 Brush Rake - 250 - 64” WBM Q/A 324/329 ....................................$6,500 Bucket - 120 - 56” WBM Q/C W/O Twist-a-Wrist DLE ................$7,000 Bucket - 200 - 36” Craig WBM Q/A (ZX210) ..................................$6,000 Bucket - 200 - 60” WBM Q/A ZX200LC ..........................................$6,250 Bucket - 250 - 36” Cat WBM Q/A....................................................$5,000 Bucket - 250 - 42” Cat WBM Q/A (322C)........................................$5,000 Bucket - 250 - 60” WBM Q/A...........................................................$5,500 Bucket - 250 - 66” C/U Finning .......................................................$4,900 Bucket - 250 - 66” EFI WBM Q/A 329E ...........................................$6,000 Bucket - 330 - 48” CWS WBM Q/A.................................................$6,500 Bucket - 345/450 - 54” WBM Q/A ...................................................$7,500 Bucket - 450 - 84” WBM Q/A ..........................................................$7,000 Chuck Blade - 250 - WBM 84” WBM Q/A .....................................$6,500 Chuck Blade - 300 - IMAC 84” WBM Q/A .....................................$6,000 Chuck Blade - 450 - WBM 120” WBM Q/A ...................................$6,500 Coupler - 250 Cat Hyd Q/A ..............................................................$3,500 Coupler - 300 Cat Hyd Q/A ..............................................................$3,500 Ripper - PC78US - 6,307D/308D, ZX75US-3, CWS ........................$1,500 Ripper - 150 - Finning Q/A Lugging .................................................$1,500 Ripper - 250 - WBM Q/A...................................................................$4,500 Ripper - 300 - WBM QA…New .......................................................$5,000 Thumb - 330 - Cat Hyd ......................................................................$6,500 Heater Propane Sureflame S1500E 150000 BTU ............................. POR Fan 2007 Air Master AH42 .................................................................. POR

Large inventory of used and rebuilt Detroit Diesel, Cat, Cummins, Perkins, Deutz and Volvo engines. P.G. Truck & Equipment PHONE: 1-800-946-9400 OR (250) 561-1234

EXCAVATORS

2007 Cat D9T U-Dozer w/tilts, 4BBL 2 shank SM ripper, ARO ready, new super extreme Cat U/C, A/C, 10,533 frame hours (3,438 idle/7,095 working), serial # RJS00736. Price reduced to $425,000 USD. Simpson & Sons 2004 HITACHI ZX225US PHONE: 1-844-995-0736 2 4 ” Pa d s , A i r Q u i c k EMPLOYMENT WANTED Change, 36” Dig, 11,765 Hours. $39,900 Expert Cat Operator wants AFTER HRS: 250-490-6795 employment driving skid AFTER HRS: 250-490-7976 cat or general dozer work. PHONE: (250) 493-4545 BOB: (306) 342-4968

ENGINES WA N T E D : “ D E A D O R ALIVE” Diesel Engines: C u m m i n s - ( B I G C A M S, 444, 4BT, KTKTA, etc), Cat (3304,3306,3408 etc.) Detroit, etc. 4 cyl. to 16 cyl. Truck or industrial. Good running assortment of good running engines. POR. Princeton, BC scott@westcoasttruck parts.com SCOTTY: (250) 295-0101

October 2019

2005 HITACHI ZX75US-A Cab Air, 18” Pads, Blade, 3,285 Hours. $54,900 AFTER HRS: 250-490-6795 AFTER HRS: 250-490-7976 PHONE: (250) 493-4545

2014 Cat 303.5E CR w/ Q/C, clean up bucket, hyd. blade, and new rubber tracks. 2304.2 hrs. $47,900. PHONE: (250) 468-1000 Hitachi ZX450LC-3, All n ew u / c, n ew p u m p s, new fan motor, all hyd. cylinders rebuilt, c/w custom built 54” rock bucket.

2011 CAT 319DL 32” Pads, Air, Quick Change, 36” Bucket, Aux Hydraulics. $49,900 AFTER HRS: 250-490-6795 AFTER HRS: 250-490-7976 PHONE: (250) 493-4545

Heavy Forestry Package Guarding, rebuilt swing motors, hyd. Thumb & hammer plumbing. PHONE: (604) 883-2514

Next Advertising Deadline is Oct. 18th, 2019. Call Sheryl for rates. CALL: 1-800-663-4802 2002 HITACHI ZX135US 20” Pads, Quick Change, Dig Bucket 13,713 Hours. $38,500 AFTER HRS: 250-490-6795 AFTER HRS: 250-490-7976 Now wrecking JD 350G LC. Langley Excavator Parts PHONE: (250) 493-4545 Exchange Inc. parts@langleyexcavator. com PHONE: 1-888-530-5444

BROWN INTERNATIONAL SERVICES

2012 Kobelco SK850, 2050 hrs., Equipped w/hyd cwt. remover, pattern changer, aux tool piping, controls, 35’ digging depth. a/c, Komatsu power 496 hp. HD 50” 5 tooth pin on digging bucket. $700,000. OBO Please Phone After 5PM PHONE: (778) 417-0017

NEW PARTS for IHC - Dresser - In Stock, including Exchange Transmissions, Steering Drives & Drop-In Motors, Carco Gearmatic Winch Products FULL TRACK PRESS FACILITIES Complete Excavator & Crawler Tractor Undercarriages Berco, Trek & Intertractor

• · · • · · · · • • • • •

MACHINES FOR SALE

IHC H80B, runs well, c/w bucket............................................$10,000 D-6 TD15E Grapple ..................................................................$4,500 TD15E Semi-U Blade ................................................................$4,500 D-7 17A machine, not running .................................................$3,500 Dresser TD20C, not running, complete .....................................$6,500 Komatsu D65 double angle tilt blade ......................................$2,900 TD20 E/G double angle tilt blade.............................................$3,500 Cat D8K Beales brush rake.......................................................$6,000 TD15C Beales brush blade .......................................................$4,000 TD15C Winch, Carco F50..........................................................$3,500 TD20G-20E Grapple ..................................................Reduced $5,000 TD20E GUTO DVT 800 engine ...................................................$9,500 Dresser TD9H/D39/TD10M, 39 link, rails, c/w 22” pads, new take off, track fit ..............................................................................$6,000 · Dresser TD20E/G 42 Link Track Grps, c/w new 26” SS pads .......................................................................................... IN STOCK · Komatsu PC300, New rock guards ...........................................$2,000 • Cat D7 17A Pup Engine ............................................................$2,500 · 924 Cat, New QA coupler, Weldco Beales ................................$1,500 · New Hitachi EX200, thumb, Wajax ...........................................$4,500 WRECKING: Hitachi EX200LC-1 c/w good tracks, thb, boom, 3 bkts & final drive; IHC S8A Skidder; Cat D7 17A; Komatsu D85E-18, good U/C Large Inventory Of New & Used International & Dresser Parts & All Brands of Undercarriage

“We Service What We Sell” Ph: (250) 546-6518 • Fax: (250) 546-3100 www.brownihc.com |E-Mail: info@brownihc.com 4274, Box 557 Hwy 97A North, Armstrong, B.C. V0E 1B0

Hitachi ZX120-1 w/ new dig bucket, new clean up bucket, and new hyd. thumb. Will come with new Q/C. Hour meter reads 1069; 25% is idle time. Actual hrs plugged in from dealer are 7244 hrs. $69,000. PHONE: (250) 468-1000

2011 Hitachi ZX135US-3 w/ new 30” dig bucket, new 54” clean up bucket, new hydraulic thumb, new Q/C and hyd. blade. 6532.7 hrs. $135,000. PHONE: (250) 468-1000

Bob’s Diesel Repairs 10718 Seaton Rd., Winfield, BC

Phone: 250-766-3833 Diesel Generator Sets - 30 kW to 150 kW Units

• 50 kW 12 Lead Stamford • Perkins 1006 Engine • Cat 3304T 75 kW, 12 Lead • Cummins 175 kW, 12 Lead • Rebuilt Cummins 8.3 Engine Cummins, Cat, Detroit Diesel Repairs

October 2019

Supply Post · Our Readers Are Your Buyers Advertise your machines in Equipment For Sale Online the classifieds! Call Sheryl – We have thousands of for deadline and rates. equipment & trucks for sale CALL: 1-800-663-4802 at SupplyPost.com! Log on

John Deere 892DLC, runs really well, c/w 42” dig bkt, 64” cln-up, hyd thumb, Q/C, 3 Rockram Hyd. hammers. Bricor West Contracting Ltd Sicamous, BC oddydrilling@cablelan.net 2012 Hitachi ZX290 LC-5 PHONE: (250) 836-2418 w/ 36” Accurate dig bucket, 2011 Volvo EC 210CL 66” CWS clean up bucket, h y d r a u l i c e x c a v a t o r . CWS hyd. thumb, Accurate $68,000. US. cab guard, aux. plumbing. auremailliance@hotmail. 7733 hrs. $147,500. com PHONE: (250) 468-1000 TIM: (509) 951-3156

20 yard surge bin, In & Out 36” conveyors, Ready to work!. $32,000. OBO

2005 JOHN DEERE 772G,

HUGH: (604) 657-7167

STK #0U665528, 1886 Hammers to fit your carrier!

FORKLIFTS 2007 Link-Belt 240 LX, 13,300hrs., c/w hyd. Q/c 36” dig bkt., 66” clean-up bkt., aux. hyd. plumbing,

pump done 10,000hrs. hrs., Work ready, c/w forks, New Berco UC comp. inc. bucket & man basket ( shoes, ver y well main- engineered). Recent hyd tained since new, smooth operator. $89,000. Langley, BC LLOYD: (604) 328-7981 Selling equipment or trucks? Submit your ad s e c u r e ly o n l i n e n ow : https://www.supplypost. com/advertise/classifieds. Many pr int and digital

pump & ECM. Pausch Equipment Ltd Kelowna East Central, BC pausch.equip@shaw.ca PHONE: (250) 470-8688

GENERATORS 70 KW 3 Ph. Cat Diesel GenSet fully enclosed unit.

options available. Let’s get P.O.R. Kelowna, B.C. 2011 Hitachi ZX75-3 w/ Juniper Equipment Ltd. it sold!!! DaeQuip clean up bucket, PHONE: 1-800-663-4802 PHONE: (250) 470-8987 DaeQuip dig bucket, Q/C, hyd. blade, aux. plumbing, 2014 Hitachi ZX135US-5N Isuzu engine. Thumb availw/ Accurate dig and clean able at extra cost. 5313 hrs. up buckets, hyd. thumb, $69,500. 2004 Hitachi 270 LC RB ......................$65,000 hyd. Q/C, and hyd. blade. PHONE: (250) 468-1000 5237 hrs. $149,900. PHONE: (250) 468-1000

MONTHLY SPECIAL: INVENTORY:

2012 Cat 568 Loader, w/New Engine, 9,200 hrs ................................... $7,500/month 1992 Kenworth Tandem Dump Truck ..$54,000

Sexsmith Used Farm Parts Ltd. Sexsmith, AB | www.usedfarmparts.com E-mail: farmpart@telusplanet.net

DISMANTLING: EXCAVATORS: Komatsu PC228USLC LOADERS: Case 621, JD 644C, JD 544B, IT14B Cat, W14, Case W20, Case W20C, MF 33D, Case W14B, JD 544 CRAWLERS: Komatsu D53A, Case 1150B, JD 450C, Cat D7, Cat D82U FORKLIFTS: IHC 4500, MF 6500 • GRADERS: Champion 720A SKIDSTEERS: Cat 297, Gehl 4625, Melroe Bobcat 943, 863, 853, 843, 610, Case 1845, 420 NH BACKHOES: JD 610T, JD 310D, Case 580B, Case 780, Ford 575E TRENCHERS: Case 860 PACKERS: Bomag BW213 PDH-2 A LARGE SELECTION OF TESTED DIESEL ENGINES CUMMINS, CAT, PERKINS, JD & CASE

1-800-340-1192

Buying Equipment For Dismantling

HAMMERS

today... www.supplypost.com

New Rad & hoses, hyd. 2004 JLG G10-55A 7800

2007 John Deere 225D LC w/new hyd. thumb, 36” WBM dig bucket, 60” Hitachi ZX200 LC-3 w/ WBM clean up bucket, WBM clean up bucket, W B M q u i c k c h a n g e , WBM dig bucket, WBM 32” triple bars pads, and hyd. thumb, aux. hyd., 3041 Isuzu engine. 8390 hrs. hrs. $165,000. $118,500. PHONE: (250) 468-1000 PHONE: (250) 468-1000

GRADERS

FEEDERS

10hrs. on rebuilt engine.

2007 John Deere 225D LC w/60” WBM clean up 2007 Hitachi ZX350LC-3 bucket, 36” CWS dig buckw/ rebuilt CWS thumb, et, low hour cat rails, pads Q/C, dig and clean up and sprockets. 8840 hrs. buckets. Excellent U/C. $98,500. Cab guard, live heel and PHONE: (250) 468-1000 grapple available. 7887 hrs. $149,000. PHONE: (250) 468-1000

Page 43

Timberjack 404 Line Skidder ................ $8,500 Cat D7F ....................................................SOLD Finning M4 3306 PR123...................... $19,500 Cat 988B ...........................................$55,000 2009 Tigercat 870C Buncher ..................POR 1974 D7F ..........................................$29,500 Rayco 84” Compactor ........................$9,500 Ford 8000 Hiab...................................$9,500 Western Star with Lowbed ...............$30,000 Cat 330 RB with Grapple ..................$70,000 Clark 667 Grapple/Line Skidder.......... $29,500 Madill 075 Track Loader ............................POR 1980 Cat 980C .....................................$37,500

*FINANCING AVAILABLE* WWW.ROYQUIP.COM

250-203-0134 FOR MORE INFO

Hours, Prince George, BC, Own or Rent. $335,000 CDN, $251,900

vanedequipment.com

USD.

PHONE: (604) 888-9020

PHONE: (888) 2-BRANDT

PHONE: (877) 255-9293

PRINCE GEORGE

TRUCK & EQUIPMENT

250-561-1234 - www.pgtruck.com

1-800-946-9400 EQUIPMENT

• 2006 Extec E7 Scalp Screener .......................... POR. • 2006 JD 2054 Waratah 622B Processor ........... POR. • 1993 Ford 9030 w/Seppi Forest Mulcher ...$49,900. • 3412 Cat GenSet 906KVA, 600/480 Volt .......... POR. • TD20G & TD20E Dressers, w/winch & ripper....POR. • 2000 Timberjack 4x4 20K lb Forklift ...........$16,000. • Onan 18kW GenSet, 1 or 3 ph., w/trailer .....$7,500. • Model 5000-21 Superlift Str. Boom Crane ......$4,950. • 2012 Alkota National Pressure Washer........$4,950.

TRUCKS & TRAILERS • 2015 W/S Tri-Drive Tractor ............................... POR. • 2005 F/L Tri-Drive Winch Tractor ...................... POR. • 1998 Peerless Super B Logging Trailer ................. POR. • 1999 Superior Super B Logging Trailer ................. POR. • 1995 Doepker Tridem Clam Dump ....................... POR. • Tridem Hayracks ................................................... POR. • Assorted Water Tanks and Trailers Available....... POR. • 2013 Volvo D13 Auto Shift................................ POR. • 2006 IHC 4400 Tandem 26’ Collins Van w/rail gate .POR. • 1990 IHC DT466 Flat Deck ................................ $6,500. • 2009 Durastar S/A w/ Reefer Van .........................POR. • 1999 FL80 Tandem 24' Deck, Moffat Fork Lift ......POR. • 1986 IHC Tandem Water Truck ...................... $17,900. • 1994 W/S Service Truck w/Fassi Crane ............... POR. • 1995 Tremcar Potable Water Tanker, Tridem .. POR. • 2014 BWS Ez-2-Load Hiboy 53' Tridem ............ POR. • 2012 IHC Prostar Autoshift Tractor .................. POR. • 1991 GMC Topkick Serv Fuel Truck, crane.$12,900. • 2005 48’ Great Dane Tandem, Dry Van ............ POR. • 2005 Westec Vac Tank ..................................... POR. • 1990 ParPac Tri-Axle ........................................ POR. • 1990 KW T800, Cummins, 5th Wheel .........$10,500. • 1981 Ford, 20’ box, p/tailgate, Allison trans. ... POR. • S/A & Tandem Axle Jeeps................................. POR. • 1998 Kenworth Tandem Dump Truck .............. POR. • 2005 Cancade Tridem End Dump ..................... POR.

WRECKING • 793 JD Buncher • 2200 Madill • 748G Skidder • G67 Grapple • TD20E • Timberjack 450A & 520 Grapple Skidder • Hitachi EX200-5 • 230 & 404 Timberjack Line Skidder • Clark 668B Line Skidder • Clark 125B Loader • John Deere 693D • Treefarmer C7 & C8 Line Skidders • 82-40 Terex • TS24 • Warner & Swasey Grad-All 300 Hydro Cruiser • Good selection of Detroit Diesel, Allison, Clark, Twin Disc, Cat, Cummins and Perkins engine and trans. parts.

Page 44

Supply Post · supplypost.com

LATHE (Log)

Custom Log Home Lathe for Sale - Inquire within. Cawston, BC T.L. Timber Ltd www.tltimber.com tltimber@nethop.net PHONE: (250) 499-6315

LOADERS (Log) 1995 Hitachi EX300-3, burnt, parting out; 1999 Hitachi 330-5, burnt, parting out. 2000 Hitachi 370, burnt, parting out. PHONE: (604) 240-7977

LOADERS (Wheel)

2011 Cat 966K, 5.25 yard GP QC bucket w/teeth, fusion coupler, cab with air, 26.5R25 tires, call for price. Simpson & Sons PHONE: 1-844-995-0736

JD 690E LC, can be heard r unning, 2 Linde final drives, motor & sprockets, cylinders & swing bearings. Also 200 SAE Lincoln welder. PHONE: (250) 674-8387

MARINE

October 2019

PROCESSORS

2005 JD 2054 w/ 622b Waratah head, line bori n g a n d sw i n g b e a r ing done approx. 3000 hrs ago, Drop-in motor done approx.. 6000 hrs PARTS 2019 Yanmar V12 Wheel 2005 Volvo L220E, 7 yd, ago. 24797 hrs . Asking 2008 40’ Itasca Horizon, Loader, 100 HP, 4-Spd. 27,000 hrs, good W/O’s. $55,000. La Crete AB 425 HP, 2 Slides, Radar Hydrostatic Drive, 22MPH $84,000. PHONE (780) 841-7972 Detector, 100kW Solar Max. Travel Speed, 20GPM CALGARY: (403) 291-1010 Panel, Elec. Protection H y d . P u m p, 8 3 ” W i d e System, Sat. Dish, Wheel Standard Bucket, Eide . LOGGING EQUIP. Tire Monitor, Aux. Brake Control, Quick Coupler, 1985 JD 580B crawler tracSystem, Dominator TowLease & Finance Options tor, angle blade & winch. bar & Rock Shield, New Available. Call for more $ 2 2 , 0 0 0 . U S, 2 0 1 0 J D Michelin Tires $149,000. info & Pricing. 748H 4X4 grapple skidPurchase as package w/ Delta Power Equipment der, $65,000. US. 2002 D11R hood with mufflers, 2016 Link-Belt 210X2PHN 2016 Chevy Colorado Picksales@deltapower.ca P r o c e s s o r, C / W 2 0 1 5 JD 648G Series lll grapple Hood removed due to TOLL FREE: (888) 528-9042 Waratah HTH622B, comp. up for $183,400. See page skidder. $42,000. US. engine up grade. measuring, steel feed rolls, 13 for more info. auremailliance@hotmail. Located in Dawson City butt saw, A/C, forestry cab, KEN: (604) 290-8209 com forestry pkg., high walker, 2001 - Class A Motor YK. $5,000 TIM: (509) 951-3156 6,850lbs. $289,000. H o m e, 4 0 f t . N ew m a r EMAIL: rjr5@icloud.com earthfirst@telus.net Mountain Aire, 6 cylinder LUMBER GORD: (250) 255-8037 Cummins w/exhaust brake. 3” & 4” Lowbed decking up All new batteries, all new ROADBUILDERS tires – Toyo. Complete outto 24’ long. 2x8 truck deck2006 KOMATSU WA250- ing 12’ to 24’ long. Treated door cover. 7.5kW genera5 20.5 Tires, Hyd Coupler, t i m b e r s & p l y w o o d s . tor, new stereo – back up Bucket & Forks, 12,375 Swamp pad timbers, 8x8 camera system. 10x10 - 12x12 - to 30’ long. Hours. $53,900 PHONE: (604) 883-2514 AFTER HRS: 250-490-6795 Bridge timbers cut to size. AFTER HRS: 250-490-7976 Poles for pile driving, any D11R radiator, Removed SAND & GRAVEL PHONE: (250) 493-4545 size. Metal roofing and wall from a running machine Quality, built in BC to your specs, Screen Decks 3’ x Cat 980F. Asking $69,000 cladding. We deliver “even due to engine up grade. 5’ to 5’ x 10’, Conveyors, OBO. 2004 Cat 980G. to the moon’. Have extra parts for it also 2 0 0 8 L i n k - B e l t 2 9 0 Feeders, Placer. Kelowna, Asking $129,000 OBO. can-ambuildingsupply@ Located in Dawson City Yk. shaw.ca Roadbuilder, c/w big bucket BC. Langley, BC. $10,000 CAN-AM LUMBER MILL Juniper Equipment Ltd. dave@infinitywest.ca & grapple. $150.000. PHONE: (604) 240-7977 PHONE: (250) 470-8987 EMAIL: rjr5@icloud.com PHONE: (604) 885-8496 PHONE: (604) 580-1415

COASTAL PACIFIC EQUIPMENT

coastalpacificeq@gmail.com | www.cpecanada.com

1-800-811-6911 • (250) 392-7755 685 South Mackenzie Avenue, Williams Lake, B.C. V2G 1E2

2008 Dressta TD9M w/6 way, Encl. Cab, 3,208 hrs ................................................................ Huge Savings! CALL 2010 Dressta TD 10M Six Way, Encl. D Cab, Winch, SOL 1,747 Hrs ................................................ Huge Savings! CALL 1990 TD15E - Angle or Semi-U blade ............................. CALL 2013 Dressta TD 15M, WT 1,378 hours 6-way blade ripper or winch ............................................................................... CALL 1987 Dresser TD20G with angle blade & ripper ............. CALL 2009 Dressta TD20M ...................................................... CALL 1981 Dresser TD25E with A/Blade, Ripper .................$40,000 1996 Dresser TD25G A-Blade, Cab, Ripper New U/C .$90,000 Timberjack 520 Swing Grapple, 24.5 x 32 tires, rebuilt trans. ......................................................................................... CALL 1993 JD540E Line Skidder, 3,217 original hours .......... CALL 2015 Case SV300-2 Skidsteer, 2,535 hrs ... Huge Savings! CALL

MISCELLANEOUS · · · · · · · · · ·

TD9, TD10, TD12, TD15C, TD15E, TD25C-E rippers TD12C, TD15C-E, TD20E-G-M, TD25C-E clearing rakes TD20E-G-M, TD25E-G Semi U blades TD25C-E-G Full U Blades · CAT D7G Blade & C-Frame Dresser 530 GP bucket · TD15C-E, TD20E-G winches Gearmatic 22 winch, Hyster W6 winch (fits D65E) Timberjack JD853 used track group Cummins 5.9 (CPL 938) 28L x 26 LS-2 tires New & Used parts for IH-Dresser-Dressta- JD648EKomatsu D65E · Wrecking Dresser 520 wheel loader, Samsung 210LC Excavator · JD748G3 Grapple Assy and Tigercat 630D Grapple Assy

Check us out on Facebook!

Ex Albion ferr y Ramp 94’X14’, Load Certified 100 ton 5 axles. PHONE: (604) 530-2657

TRUE NORTH EQUIPMENT INC.

WYATT’S USED EQUIPMENT SALES & PARTS

2005 Deere 850J Dozer, 6-Way Blade, Ripper, Cab w/ Brush Guards, 50% U/C, 8,000 Machine hrs., 2,000 hrs. on New Engine .........................................................................$103,500

1978 Cat D9H Dozer, UBlade & Ripper.................... $75,000 1991 Cat D8N Dozer, UBlade & Ripper.................... $97,000 1978 Cat D8K Dozer, Twin Tilt Angle Blade ............. $47,500 1979 Cat D8K Dozer, UBlade & Ripper .................... $42,500 1970 Cat D8H Dozer, Angle Blade & Ripper ............ $27,000 1987 Cat D4H TSK, 6-Way Blade, Winch, New U/C .. $57,500 2016 Cat 325D LL, WBM power clam, 5,000 hrs ..... $395,000 1996 Timberjack 608 Processor ............................. $28,500 1981 Cat 16G Grader, 16’ MB, Ripper & wing ......... $45,000 1998 Champion 750 Grader, 11,211 hrs, c/w 2 Sets of Chains and Snow Wing ........................................... $54,500 1981 Cat 631D Scraper ........................................... $45,000 1980 Cat 966C Loader, 3rd Valve & Bucket............. $35,500 1997 Cat 527 TSK Skidder, 6-Way Blade, Swing Boom & Grapple ................................................................. $160,000 2014 John Deere 848H Grapple Skidder, 7,000 Hrs, Chains & Dual Function Grapple ....................................... $185,000 Cat D5H Winch c/w Controls & Pump..................... $13,500 Cat D7R Winch........................................................ $10,000 Cat D6C LGP Straight Blade ...................................... $4,250 Limmit 2300B Stroke Delimber w/Mount & Comp ........ $2,750 Tree Tow Dresser TD20E Grapple .............................. $5,000 Heel Rack & grapple, fits Cat 320C excavator ........... $4,500 Weldco Beales Bush Blade, fits to Dresser TD20 ...... $3,750 Weldco Beales Log Grapple, fits 966D, E or F ........... $4,500 Cat 966 D, E, F, Hydraulic Quick Attach ..................... $2,750 NEW Accurate Komatsu PC308 Exc. Thumb ............. $7,000 WBM Cat 973C Side Dump Bkt, Like New................. $7,500 Cat D11 U/C, 6 Sprocket Segment, Idler & Roller ... $10,500 (2) Cat 966C 1800 X 25 Rim, 16 Bolt...................$375 each Cat D6T Draw Bar, with Counterweights ................... $3,000 NEW Komatsu Idler, fits PC 400-6 or HD300-6 ......... $1,950 (8) New OEM Cat HD Bkt. Teeth, c/w 1 Tooth Adapter, Fits 988 or 990 ............................................................... $2,000 Parting Out 1975 Cat 14G Grader......................... Call Parting Out Cat D5H TSK .................................. Call

1-780-722-8129 · www.truenorthequipment.ca

Weldco 250 Series 40” Excavating Bucket, 5 Teeth, Kat Lugging ...........................................................................$4,500 Weldco 250 Series Ripper, Kat Lugging ........................$3,395 2016 Tigercat 870C Feller Buncher, 7,400 Hrs .......$395,000 1997 Unimog U2150, Fluid Tank w/Pump, Extra Set of Tires & Rims..............................................................................$50,000 Hultdins SG520S Grapple, c/w GVS173 Rotator ..........$7,920 2006 Komatsu 200LC-7, Waratah 622B Processor, Forestry Cab, Guarding, High Walker ..........................................$35,000 2012 Hyundai 210LC-9, Waratah 622B Processor, Forestry Cab, Guarding, High Walker, 19,500 Hours ..................$95,000 2012 Hyundai 250/Southstar 585 Processor, 6750 hrs ....................................................................................$220,000 2000 Prentice 620, Quadco 5600 head, newer engine & undercarriage ...............................................................$93,500 2018 TimberPro 725D/Southstar 500 Processor, NEW..POR 2009 TimberPro 830B Combo, Clambunk, Shortwood Bunks, Hultdins Grapple, Tracks, 9,200 hrs............................$250,000 2011 Hyundai 250LC-9 Excavator, Q/C, 2 Buckets, Hyd. Thumb, 2,300 Hrs.......................................................$135,000 2012 Hyundai 210LC-9/LogMax 7000XT, 12,500 hrs. ...........................................................................$124,500 NEW AMI Quick Coupler, c/w Blank Hooks For Hyundai HL730 ....................................................................$1,500

Call 250-706-8594

October 2019

Supply Post · Our Readers Are Your Buyers

Small log line mill consists of end dogging scragg, chop saw, dbl hd notcher, stacker, all Pendu equip. For more info and pictures go to - www.sawmilltrader. com. Also available - Head Rig, Re-Saw, Wood Splitter PHONE: (250) 446-2450

PORTABLE SAWMILLS INDUSTRIAL SAWMILLS BLADES & BLADE MAINTENANCE. PHONE: (877) 866-0667

SCREEN PLANT

2 0 1 8 M c C l o s key R 7 0 Scalping Screener, 9x4 S c r e e n B ox , 2 - D e c k , Tier 3 Engine, Like New Condition, 300 hrs. $185,000. For sale or rent. Langley, BC Norstone Excavating. gerrardbwhite@gmail. com PHONE: (604) 866-0482

2012 Terex Finlay 683. 6’ x 13’. 1764 hours. Sizing Screening Plant Caterpillar 4 cylce diesel, levelling cat walks. TRACK READY TO GO TO WORK. Located in Yorkton Sask. $160,000. acelectric6@gmail.com. PHONE: (306) 621-6420

SURPLUS Galvanized 1x7 Strand ½” + 3/8” Surplus Pricing. ED: (403) 899-2363

TRAILERS

3 0 , 0 0 0 l b. Ta g / T i l t E q u i p m e n t Tra i l e r, a i r brakes, electric jack, Decks - 9 ft. Stationary & 18 ft. Tilt, 60 % tread on tandem duel tires. (Trailer rebuilt in 2014) Ly l e ’s Bobcat & Excavating Service lylesbobcatexcavating. com lylesbobcat@yahoo.ca PHONE:(604) 302-2232

We have a few trucks in n o n - wo r k i n g c o n d i t i o n to be salvaged for parts. 2012 International - 2 units, 2013 International, 2011 Volvo, 2007 Peterbilt, 1998 Capacity Shunt Truck - 2 units, Ottawa Shunt Truck, Capacity Shunt trucks -6 units, 1999 Ottawa Shunt Tr uck - 3 units, 2004 K a l m a r, 1 9 9 7 O t t aw a Shunt Truck Come with your crew, dismantle the trucks and take it away. Please contact Suraj at suraj@euroasiainc.com to schedule a visit. Euro Asia Transload Inc. Richmond, BC. PHONE: (604) 240-3089

TRUCKS (Hwy)

2007 9900i INT, C15 550 18 speed 391 gears 4 wheel lock 46rears on hendrickson air ride and wetCan’t find what you are 2 0 0 1 A s p e n Tr i - A x l e , line. CALL FOR $$ looking for? Thousands of RGN, double drop, tridem. JEFF: (519) 580-6480 more machines and equip- $25,000. OBO. ment for sale on: PHONE: (250) 551-5252 www.supplypost.com Pictures

TRUCKS

1998 Hino rodder good condition, ready to work. $65,000. OBO. PHONE: (250) 551-5252 2017 Custom Mobile screen plant w/generator trailer, ideal for soil/compost/wood products. 55 ft. of screen floor set up w/3 conveyors. Screens 3/8” minus, 1” minus and overs. 5 hours. $95,000. Surrey, B.C. Triple Five Quality Wood Inc. PHONE: (778) 867-2275

Wally’s tires

1978 KW Roll-Off with 9 bins. $50,000. OBO. PHONE: (250) 551-5252

SAWMILLS

Quality New Tires & Chains Phone: (250) 833-8349 2005 T800 KW, C15 550 18spd 410 gears 14.6frt, Super 40rears on 8bag air ride and wetline. CALL FOR $$ JEFF: (519) 580-6480

TRUCKS (Off Hwy)

ENGINE PARTS ENGINES • CALL MARK 403-519-7254 CAT • 3126 .......................................................$2,500 - $4,900 • C7 ...........................................................$4,900 - $6,500 • C7 RB LB .............................................................. $9,500 • C15 MXS .............................................................. $9,500 CUMMINS • ISL CM554 ........................................................... $5,500 • 4B3.9 .................................................................... $5,000 DETROIT • 4-71 RB ................................................................ $5,000 • 6V92TA DDEC .................................................... $10,900 IHC • DT 466E................................................................ $3,200

1-800-361-7333

Ph: 403-720-3494 mark@albertaengine.com

MARCHER SKIDDER TIRES & CHAINS • Economically Priced Tires & chains • Fast Shipping • Mounting Available (Locally) • Trade-Ins Welcome

*INTRODUCTORY PRICING* SKIDDER TIRES

• 24.5 x 32 - 20 ply......................................................... $2,500 • 30.5 x 32 - 26 ply ........................................................ $3,200 • 35.5 x 32 - 26 ply......................................................... $4,400

SKIDDER CHAINS • 30.5 x 32 - 3/4” link - Diamond Style .......................... $4,000 • 35.5 x 32 - 3/4” link - Diamond Style ........................... $4,400

2014 Volvo A40G, 6,754 Hrs., ROPS Cab w/AC, 29.5R25 Tires (New tires to be installed), Secondary steering, Brake cooling sys, Auto drive modes, 1 0 0 % D i f f l o ck , Au t o torque lock-up, Box heater, Tailgate, Auto grease, Rear camera, Work lights, $375,000. Marcel Equipment sales@marcelequipment. com PHONE: 1-800-265-5747 Next Advertising Deadline is Oct. 18th, 2019. Call Sheryl for rates. CALL: 1-800-663-4802

FOR SALE Available

1980 MADILL 071 YARDER ON RUBBER, 6V92TA Four Axle Carrier, 4 Guy Lines, New Paint Work Ready. Comes With Maki 11 Carriage ...........................................................$150,000. WAGNER, L 4130C LOG LOADER, Near New Tires In Very Good Condition. .............................................................$150,000. 2012 HITACHI ZX 350 EXC., 5,500 hrs.........................$230,000.

WWW.ALBERTAENGINE.COM 64166-426 Ave E Aldersyde, AB T0L 0A0

Evenings (250) 835-4678

Located in Sorrento, BC

WAGNER, L 90 LOG LOADER, Good Runner ......$45.000. OBO

2007 Peterbilt 357, 8 M3 McNeilus boost-a-load drums., Cat C12 engines. F i ve t o c h o o s e f r o m . Approximately 16,000 hrs. Current CVI, work ready. HUGH: (604) 657-7167

Page 45

2007 J.D. 350D EXC. 7,400 Hours, Cab Guard, Thumb, U/C At 90%, Two Buckets .........................................................$145,000. 2006 J.D. 240D, LC, Ex. 6,350 Hrs, FOPS, Thumb, Long Stick. In Good Working Cond. ...................................................$72,500 1996 CAT 330 L EXC.,10,500 hrs, fops, thumb ..............$57,000. 1995 HITACHI EX 300 H, 10,000 hrs, 75% U/C ..............$57,000. MORBARK 1000 TUB GRINDER, Working Cond. ........$87,500.

Wally’s Private Parts Quality Used Parts

Phone: (250) 833-8349

RUNNING MACHINES FOR SALE • JD 648G III, torque converter style, new tires ..... $35,000 OBO • JD 748E, recent work orders, call for details ...... $27,000 OBO • Tigercat 860, flat bottom, good shape, call for details .......................................................................... $44,000 OBO

PARTS MACHINES Skidders John Deere 640D-Just came in • John Deere 848H Skidder • John Deere 648D Grapple Skidder • Burnt 648 GIIIJD Skidder• John Deere 648GII Burnt • John Deere 748GII • International S7 Skidder • S10 International Skidder • 748GII Skidder • 2005 Cat 545 Skidder • 545 Cat skidder, 748GIII, 748GII, 848 JD Skidders • 525 Cat Skidder • 630 Tigercat Grapple Skidder • 518 Cat Skidder• S8, S9 International Skidder • 380, 404, 450, 480, 550, 660 TJ Skidders

Excavators 240BLC Volvo Excavator • 220 Hitachi LC • 230 JD LC • 690E w/ Denarco - 3000Stroker • 210 Volvo w/ 2000 Limmit • 240 Volvo Excavator• 210 Volvo Excavator Burnt • Case 1085 Rubber Tire Excavator • Cat 325L Excavator with 2200 Limmit Stroker • 160 Kobelco Excavator 2004 Burnt • 200 LC Hitachi • 2005 330 LinkBelt Excavator • 325 Cat Excavator• Link-Belt 2800 Quantum 3000 Dewarco • 210 300 Komatsu • 210, 200 Hyundai W/ Harricana Stroker • 330, 320, 325, 322, 225, 235 Cat • Hitachi 270 • Hitachi EX200LC • 220 Komatsu

Loaders Log: JD 2054 Log Loader, • 330 Cat Log Loader with Thunderbird Log Loader • 644A Jd Loader Wheel: • 125 Clarke Wheel Loader • Terex 8231 Loader

Bunchers Just came in: 860 & 870 Tigercat Bunchers • Madill 2200 Buncher • TJ 625 Buncher • Madill 2800 w/ 360 Head • 630A Prentice Tilter Buncher • 850 TJ Buncher • 950 TJ Buncher • Timberjack 950 Buncher • Madill 2200 Buncher Burnt • 2007 753 JD Buncher(Burnt) • 748GIII Burnt• 618 Buncher • 2628, 608, 618, 628 TJ Bunchers • 630 Prentice Buncher

Crawler Tractors • D8H Cat, D7F Cat, Komatsu D65D

1 - NEW ROCK TRUCK TIRE 26.5 x R25, L-3, AL37 ........$2,650. LARGE ASSRT. OF USED ROCK TRUCK TIRES, 750/65 X R25, 30/65 X R25. 15 TO 30% ............................... PICTURES & P.O.R. MADILL 099 YARDER, Working Condition .................$175,000. D10 N/R/T TRACK RAILS, 1 Set At 80% .......................$20,000. D10 RIPPER SHANK ..........................................................$2,250. PORT A POWER RAMS 50 T - 125 T .....................FROM $750. HEEL and CYL. For Madill 3800C ......................................P.O.R. JRB HYD. PIPE GRAPPLE With Quick Change 72 Inch X 106 Inch, As New .....................................................................$4,500. VOLVO L 150 E HYD. PIPE FORKS With Q/C Sliding Forks, 64 Inch X 106 Inch As New ...................................................$4,500.

NEW KOBRA HYDRAULIC DRYWALL FORKS............$1,350.

~HOPE MECHANICAL SERVICES~ Phone, Text or Email · easyhope@yahoo.com

Glen at 604-795-6827, Ray at 604-860-3000 HEAVY DUTY MOBILE MECHANICAL SERVICES

Contact Reed at 604-869-6222

Evenings (250) 835-4678

Located in Sorrento, BC

Graders • 686 & 740 Champion Grader • Austin Western Champion D600-760 Tractors • 630B Tigercat

Trucks • 1995 Freightliner, Series 60 Detroit, 470 Hp, 40,000 Lb 410 Ratio Rockwell Axles, Dbl Lockers

Other parts machines • 320 Waratah Head • Coring Hotsaw 20-22 Head • OMEGA 20-20 Ton Hyd. Crane • Crane Ph 20-1A Omega • Denharco 3000-3500 Strokers

Used Tires and Chains • 35.5 x 32, 30.5 x 32, 24.5 x 32, 23.1 x 26 • 18.4 x 34, 26 x 28 • 18.00 x 25 • 14.00 x 24, 16.00 x 24, 20.5 x 25

Tracks • 618, 628, D6, D7, 200

Running Motors • 8.3 5.9 Cummins; 671, 353, 453, 471, 6V53 • Detroit Diesel; 466, 414, 4276, • 4045 John Deere

Visit www.SkidderBuncherParts.com MASTERCARD For More Info & Photos! VISA &ACCEPTED

Page 46

Supply Post · supplypost.com

2 0 1 1 – C AT WAG O N ROCK TRUCK, 5500 hrs. on truck, heated box w/ liner, back up camera, engine external block heat, c/w 2 new spare tires. PHONE: (604) 883-2514

WANTED WANTED backhoes, dozers, many excavators, mining equipment, trommels, screen decks, skidders, loggers, Cats with winches etc. auremailliance@hotmail. com TIM: (509) 951-3156

Selling equipment or trucks? Submit your ad s e c u r e ly o n l i n e n ow : https://www.supplypost. com/advertise/classifieds or scan the above code. Many pr int and digital options available. Let’s get it sold!!! PHONE: 1-800-663-4802

Latest Loader Technologies Improve Machine Performance And Human Machine Interface Advances in heavy equipment today have less to do with iron and more to do with technology, and the headlines prove it. At trade shows, Caterpillar has been showcasing a remote operation station that allows people to operate a dozer in a different part of the world. Komatsu purchased 1,000 drones to aid in the company’s Smart Construction—a drone-assisted, automated equipment service. And, more recently, Doosan Bobcat North America announced a partnership with SafeAI to explore how advanced artificial intelligence (AI) technologies could be incorporated into Bobcat equipment. Wheel loaders are being introduced with some advanced technologies that allow equipment operators and owners to work more productively, efficiently and safely. Owners and op-

LNH EQUIPMENT LOOKING TO BUY USED EQUIPMENT • ALL CONDITIONS • TOP PRICES PAID

CALL TODAY

EXCAVATORS / PROCESSORS / LOADERS 2014 JD 250G, 5,000 hrs, cab guard, catwalks, thumb Espar, heater, brand new engine w/receipts, new U/C ............................. $125,000 STREET SWEEPER 2008 Lay-Mor 6HC Street Sweeper, 6’ angle broom. Kubota diesel engine. 382 orig hours. Exc.cond.work ready. Delivery available. Asking .................................................................................. $9,500 TRUCKS & TRAILERS 2008 International 5600 6x6 - Cummins ISX 450 hp, 8 spd transmission with low-low, heavy spec, wiring for crane all there. Delivery available. Asking.................................................... $50,000 1999 Mack CL 713, hydro Vac truck, c/w PTO vacuum and tank 107,702 kms, fresh CVI & work .............................................. P.O.R. 1981 Peerless Tandem Axle Low bed, 8’6” wide, rear beavertail, manual disc connect front neck, nice condition, fresh CVI & new decking .................................................................................$17,500 FINAL DRIVES Link-Belt 240 LX final drives with drive motors ................... P.O.R. Cat 315 Final Drive Complete w/Propel Motor ........................CALL ATTACHMENTS 2003 Waratah 622 Processing Head, can be seen running, no breaks or welds, complete with everything ......................... $15,000 Complete Hyd. Thumb off Volvo 240, includes all parts & brackets ............................................................................................. $4,500 Various Excavator buckets to fit all size machines ................CALL 2014 Hyundai 210-9 Forester burn unit for parts ...................CALL Recently In – 2004 Volvo 240B Forester – Burnt Unit, will sell complete or parts; c/w Q/A, dig bkt & hyd. thmb ......................CALL 2004 Volvo 210B Forester Burnt, complete or parts ...............CALL Volvo A40C complete, for parts ...............................................CALL Hitachi EX200-1 • Cat 330 BL ................................................CALL

TF: (844) 849-4257

www.lnhequipmentltd.com for complete inventory and pictures

erators can save money by decreasing downtime and maintenance costs, and, via data, to make better decisions when it comes to equipment operation and project management. From surveying several wheel loader original equipment manufacturers (OEMs), many of the most advanced wheel loader technologies fall into four categories: • Telematics • Human machine interface • Tractive effort • Power

hicle to help with repairs and deliver the proper parts. This year, Doosan introduced an enhanced version of its telematics system called DoosanCONNECT that allows for mobile devices to access the information. “Customers are increasingly using mobileenabled devices to access machine information from anywhere,” says Aaron Kleingartner, marketing manager, Doosan Infracore North America, LLC. “This trend will only grow within the next years, as data beTalking To Machines comes more and more imTelematics are a feature portant.” on many machine categories, including wheel load- Taking Control ers; it allows for remote As machines evolve, monitoring and remote how operators interface machine diagnostics. with them evolves as well. JCB’s telematics system New in-cab changes inis called LiveLink; it allows clude touch screens, data, fleet managers to remote- more intuitive operation ly monitor the operating and greater ergonomics. hours, location, fuel usage, This year, Doosan insystem alerts, performance troduced a new forwardreports and status condi- neutral-reverse (FNR) joytions of a single machine or stick control/gear selector an entire fleet. for greater comfort and Doosan telematics al- productivity. The FNR low equipment owners and functionality on the joyfleet managers to remotely stick allows operators to monitor machine location, easily switch between forhours, fuel usage, engine ward, neutral and reverse idle versus work time and without removing his or error codes, as well as en- her hand from the controls gine and hydraulic tem- simply by pressing the joyperatures. stick buttons. In addition, telematics Many machine funcallows dealers to provide tions and settings are now improved customer sup- accessed via a touchscreen port by responding to ma- inside the cab. The JCB chine warning messages CommandPlus Cab feaand alerts, troubleshooting tures an onboard monitor machine issues, and then that includes a “help” feasending a field service ve- ture that details the func-

DEERE CONSTRUCTION Parts & Components

One of the largest inventories of used, rebuilt, and new surplus Deere parts and components in North America. We also stock parts for Hitachi, Timberjack, Caterpillar, Ditch Witch and can locate those hard to find parts that we may not have in stock.

BRANDT VALUE PARTS

1-877-685-4886

October 2019 tion of all controls and an operator’s manual with essential information, such as appropriate tire pressures and acceptable oil types. “Inside the JCB CommandPlus Cab, the controls and layout are optimized for operator comfort and ease-of-use,” says Rupert Bradley, product manager for wheel loaders at JCB North America. The commonly used controls, including forward and reverse, transmission kick-down, proportional hydraulic auxiliary controls, horn and manual front axle differential-lock, are located on the seat-mounted joystick. Other controls are grouped on the righthand side A-pillar for easy reach. The cab also features a monitor for the machine’s rear-facing camera. The machine can also be equipped with a rear radar detection system to further reduce collision risk. “Komatsu wheel loaders allow operators to adjust to their working conditions by using the machines’ variable traction control,” says Jon Jennings, product marketing manager, HST loaders, Komatsu America Corp. Settings include Max, Auto and S-mode. Max provides maximum power to the wheels. Auto-mode optimizes the tractive effort for various working conditions. And S-mode is designed to prevent wheel spin in very slippery or snowy conditions where traction may be at a minimum. Where The Machines Meets The Material Tractive effort is a very important feature to wheel loaders because they often need it to dig into a pile and travel rough ground at

faster speeds. Hitachi says they have increased tractive effort by more than 30 percent on the Hitachi ZW310-6 and ZW370-6 wheel loaders. “This technological advance is accomplished by creating more advanced software,” says Mel Wade, application engineer, Hitachi. The end-user will experience the difference when digging, dozing, climbing hills, or other high rimpull requiring applications.” In the larger Hitachi ZW370-6 and ZW550-6 loaders, the Traction Control System (TCS) can be operator activated and deactivated via the display main menu. As these machines are less likely to move from site to site, this is a “set and forget” feature. In the smaller, compact hydrostatic Hitachi wheel loaders, the tractive effort is regulated with a TCS switch. TCS is useful for snow removal applications, as well as muddy environments, because it eliminates unnecessary tire slippage and increases tire life. “It’s an intuitive system that balances hydraulic power consumption with powertrain consumption,” says Wade. This system maximizes the use of the available power. The software collects real-time data, such as hydraulic pressure, engine torque and application demand. TCS determines the appropriate balance to make the wheel loader as efficient as possible for that situation. Liebherr increases tractive effort in a different manner. The LiebherrXPower driveline brings together both hydrostatic and mechanical drive paths. The interaction between these two different drives Continued on page 47

FOR SALE

GRANITE ROCK QUARRY AND SAND & GRAVEL • • • •

100 plus acres! Granite Rock. Gravel Quarry Pit. All equipment included in price. PRICE REDUCED TO $1.5m

Highway #4, Parksville - Qualicum area on Vancouver Island, BC. Call for more information:

Cell: (250) 756-8532 Phone: (250) 758-7652

Page 47 CONEPXO

Supply Post · Our Readers Are Your Buyers

CONEPXO

October 2019

Continued from page 46

is continuously adjusted automatically to the given application. “As a result, XPower offers the optimal level of efficiency during material loading and transport, as well as providing maximum acceleration and performance throughout all loading cycles, including long routes,” says Nick Rogers, product specialist/ inside sales coordinator, Liebherr USA, Co. Rogers continues: “All components are ideally matched allowing for continuous adjustment of acceleration in all speed rang-

es, without noticeable gear shifting or interruption in tractive force. The Liebherr-XPower driveline with Liebherr-Power-Efficiency (LPE) achieves a reduction in fuel consumption of up to 30 percent when compared to conventional travel gears.” Under The Hood Engines never stop changing. Modern wheel loader engines are designed to be efficient while eliminating the need for a diesel particulate filter (DPF). These engines tend to use a selective catalytic

reduction (SCR) system. The Hitachi ZW wheel loaders use an SCR system that requires no DPF, and that means no DPF regenerations. “This system reduces fuel consumption and maintenance costs,” says Sam Shelton, marketing manager, Hitachi. “Hitachi has worked with Cummins engines for years perfecting this technology, and this technology has proven simple and efficient for Hitachi wheel loader owners.” Due to Liebherr’s unique SCR technology, fewer components, such as

DPF or exhaust gas recirculation, are not needed. This reduces maintenance costs and the risk of failure. JCB wheel loaders are powered by Tier 4 Finalcompliant engines with no replaceable DPF. The compact 407 and 409 wheel loader models also require no diesel exhaust fluid (DEF). As well, JCB wheel loaders benefit from automatic transmissions and intelligent clutch cut-off (ICCO); together with the JCB Smoothride System (SRS), they allow the operator to focus on the task without the distraction of

complex operating procedures. The Hydrostatic Transmission (HST) used in the Komatsu WA200, WA270 and WA320 is in its 4th generation. “This transmission technology is not only robust, but has the advantage of quick travel response and aggressive drive into the pile. Full auto-shifting eliminates any gear shifting, and manual kick-down allows the operator to concentrate on digging and loading,” says Jennings. The HST also acts as a brake when the throttle is lifted—called

dynamic braking, which reduces wear on the traditional wet disc service brakes.” The number of OEMS who have invested so much innovation into engines, as well as the previous technology categories, demonstrate that technological innovation isn’t about just adding a bunch of new gadgets and features to an old wheel loader, it’s about enhancing traditional components and applications through forward-thinking design. b Source: Conexpo

CEDAR RAPIDS LINER PROMOTION

MVP280 CONE CRUSHER

4200-300-22 MANTLE ......................................................................$2,230 4200-300-24 LINER COARSE .............................................................$2,915 4200-300-25 LINER MEDIUM ........................................................... $2,825

MVP380 CONE CRUSHER

4800-300-24 MANTLE ........................................................................$2,659 4800-300-67 LINER COARSE .............................................................. $3,335

MVP450 CONE CRUSHER

5400-300-20 MANTLE ..................................................................... $3,165 5400-300-15 LINER COARSE ............................................................ $4,110

30 X 42 JAW CRUSHER

3042-051-01 STATIONARY JAW HD ..................................................... $5,375 3042-051-02 MOVEABLE JAW HD ....................................................... $5,350

Chieftain Equipment

Sales & Rental Professionals Trusted Parts Experts Service & Maintenance Specialists

F/T HD Mechanic Required

Email resume to: ken@chieftainequipment.com

Alberta/ Northern Territories

1-833-601-6787 chieftainequipment.com

Page 48

Supply Post · supplypost.com

October 2019

GREAT NEW & USED INVENTORY! SALES & RENTALS • SCREENERS • CONVEYORS • CRUSHERS • AGGREGATE EQUIPMENT

1-800-960-9939 | 403-946-4860 | Fax: 403-946-5191

AGGREGATE EQUIPMENT CLEARANCE!

McCLOSKEY 514 R TROMMEL

42 X 42 POWERSCREEN IMPACTOR, CAT diesel power, this unit is ready to go to work!

2006 CEC 45” DIESEL TRACK CONE, 5,800 engine hours, in excellent working condition

CONVEYORS IN STOCK! Electric and Diesel. Call for any size!

2007 McCLOSKEY S130 TRIPLE DECK TRACK

2010 MCCLOSKEY C50 — Call for pricing

In House Financing now available! Flexible terms and conditions. Call Tyalta Finance today at 1-877-550-0016, finance@tyalta.com

www.tyalta.com | info@tyalta.com

.com FAMILY OWNED, SINCE 1971

Ed Murray: 250-812-2925 Garry Shelton: 250-715-5088 Emily Polack: 250-480-8281 Ted Peterson: 604-240-6181 Rob Nessel: 250-710-3626 Rod Popp: 250-668-4756 Craig Willett: 250-287-6169

SECTION 3

.com OCTOBER 2019 · PAGE 49

Victoria: 1-888-652-9139 Duncan: 1-866-746-1515 Langford: 1-250-915-0350 Nanaimo: 1-250-756-0026 Burnside (Parts): 1-250-384-0451 Campbell River: 1-250-286-1151

NOW SIX LOCATIONS TO SERVE YOU!

RIGGED DUMP TRUCKS - READY TO WORK! 2020 WESTERN STAR 4700 DUMP TRUCK, Detroit DD13 505 Hp 1850lb/ft with Eaton 18 Speed Manual transmission. 20,000# Front Axle 46,000# Rear Axles. Rigged with Nahanni Light Steel Box and with Pony Wet Kit.

2020 WESTERN STAR 4900 DD16 600HP 1850 lb/ft with Eaton 18 spd. manual transmission 20,000FA 46,000RA. Rigged w/ Summit Brandon box and pony wet kit. READY FOR WORK.

2020 FREIGHTLINER M2106, Cummins L9 350 Hp with Allison automatic, 20,000 FA, 40,000 RA. Rigged with Nahanni Light Steel box. CALL TODAY FOR PRICING.

2020 WESTERN STAR 4900 Detroit DD16 600HP 1850 lb/ft with Eaton 18 spd. manual transmission. 20,000FA 46,000RA. Rigged w/ Nahanni Tub body. CALL TODAY FOR PRICING.

ST 1 O IN C K !

WELL PRICED NEW & USED TRUCKS IN STOCK!

2020 WESTERN STAR 4700, rigged with Can American Soil King Extreme, Detroit DD13 470HP, 1650 Ft/Lb with Eaton 18 Speed Manual Transmission, 20,000# FA, 46,000# RA. IN STOCK AND READY TO GO TO WORK!

WAS $69,900

NOW $62,500 2006 STERLING W/REAR MOUNT HIAB CRANE, MBE 4000450 HP, Eaton 18 Sp Trans, 20,000FA w/46,000RA. Hiab 144: Lift Cap. Wt 2,650 lb @ Max Reach 33’10. Max Lift Cap. 4410 lb @ Reach Of 20’8, 276,300 mi. READY TO GO TO WORK!

2019 WESTERN STAR 4900 SF Tractor, 40" Sleeper, Detroit DD16 600 Hp 1850 torque with Eaton 18 speed manual transmission. 12,000FA Super 40 RA. GREAT B-TRAIN SPEC.

2019 FREIGHTLINER 122SD, with 70” Raised Roof Sleeper, Detroit DD16 600 Hp with Eaton 18 Speed Manual, 13,300FA, 46,000RA. 1 in stock. CALL TODAY FOR PRICING!

NEW ARRIVAL

$179,900

$39,500

2016 WESTERN STAR SELF-LOADER, 4900 WS, Detroit DD16 600HP, Eaton 18 spd, 20,000FA, 69,000RA, rigged w/2004 Serco 160 log loader and sliding log bunk, 185,700 kms. PASSED INSPECTION & READY FOR WORK.

2013 HINO 258 WITH 26.6’ VAN BODY, Hino J08E-BC 220HP Engine w/Allison auto. 10,000FA, 19,000RA, rigged with Collins 25/5’ van body with rollup rear door. NICE CLEAN TRUCKS, READY TO GO TO WORK. 330,000km.

www.prtruckcentre.com

TRAILERS

Page 50

Supply Post · supplypost.com

October 2019

1-855-998-0716 SALES • RENTALS • PARTS • SERVICE & REPAIRS • FINANCE & LEASING

Edmonton Trailer Sales & Leasing is proud to announce that we are your Official Stoughton dealer in Alberta. We have OVER 100 Vans available; Including Z-Plate, Sheet & Post, Reefer, Heater, & Insulated Dry Vans in Tandem & Tridem Axle Configurations Ready for Immediate Delivery! Call For More Info

2018 Doepker Crossgate Dump, 38’ Length, Alum./ Steel Wheels, 576 11R24.5 BF Goodrich ST Load Ranger H Tires, Air Ride Susp., GVWR 43,100 kgs, Gate opening 17”x93”/Hopper Stk# 12678............$72,995

2015 Peterbilt 579, Great Shape w/ Rebuilt Engine from Stahl Peterbilt at 380,000 kms. Equipped w/ Ace Headache Rack & Pintle Hitch, 72” Sleeper w/ Bunk Heater, Microwave & Fridge, Stk# 11837 ...... $114,995

2019 Advance Super B TC407, Alum. Barrel, 2 comp., Titan gauges w/ 2 readouts, 63,600L cap., Alum. wheels., 11R24.5 Tires, (2) 20” Manholes, Full Tunnel, Catwalk & More! Stk# 12788 ....... $309,995

2020 Doepker Tridem Logger w/Steering Axle, Alumi. Wheels, 4” Stakes, QT400 6-9’6” Wide Bunks, Wide Axles, 11R24.5 BF Goodrich Cross Control, Tire Chain Hangars, HT300 Susp., Tare Weight 21,365 lbs, Stk# 12599..................................................$111,995

2020 Doepker Super B Flat Deck, 60’ Length, 5 Axles, Aluminum Wheels, 11R22.5 Tires, Intraxx A/R Susp., GVWR: Lead 77,200lbs, Rear 77,200lbs, Stk# 12998................................................ $94,995

2020 Stellar King B Logger, 6 Axle, 60” Axle Spread, Alum. Wheels, 11R24.5 Tires, Air Ride Susp., Tandem & Tri-Drive Main Gooseneck, Too Many Features to List! Stk# 12850.............................................. $155,995

2020 Doepker Drop Deck w/ 5’ Beaver Tail & Ramps, 53’ Length, Tridem, Alum. Wheels, 255 70R22.5 BF Goodrich ST230 Load Ranger H Tires, Intraxx A/R Susp., Stk# 12623 .......................$62,995

2020 Lazer Inox Stainless Steel Tridem TC407, 44,000L Capacity, 2 Compartments, Heated Belly, Mounted Cabinet Comes Fully Rigged w/ T&E Pump, Titan Gauges & Load Hose, Stk# 10728 ........ $224,995

2020 Polar Alum. Pneumatic Super B, 1,880 Cu. Ft. Total Cap., 1 Comp., 2 Hopper Lead; 1 Comp., 2 Hopper Pup, Operating Pressure of 15 PSI at 125°F, 20” Alum. Cover Manhole w/ 6 Hold Downs, Too Many Features to List! Stk #12647 ......................... $229,995

RENT FROM US! Our rental fleet has over two hundred units in service. We offer daily, weekly, and monthly rental purchase options available.

FOR FULL INVENTORY VISIT

WWW.EDMONTONTRAILER.COM

October 2019

Supply Post · Our Readers Are Your Buyers

Page 51

Double The Fun: 100th Birthday Party For 1919 Trucks Iowa 80 Trucking Museum hosted a 100th Birthday party for two of its 1919 trucks recently; a 1919 International Model F1 and a 1919 Pierce Arrow The event coincided with this year’s Walcott Truckers Jamboree. “The 1919 International is the first truck Bill Moon ever purchased”, says Dave Meier, museum curator. “He kept the truck at his house under the car port. His kids played on it and Bill drove it in many parades. It was the truck that started his love of collecting.” It’s important to note that that same model of truck was the first to climb Pike’s Peak. 1,591 of these

trucks were produced. The truck has a top speed of 17 MPH. Then the 1919 Pierce Arrow was purchased, it looked nothing like it does today. The truck has been completely restored. It is a crank start, has solid rubber tires and a worm drive. The dump bed is hydraulic. According to Meier, “By 1919 Pierce Arrow already a history of building luxury cars, but there was nothing luxurious about this 1919 Pierce Arrow truck. It performed well and held up under heavy use, but there was definitely no luxury involved.” b Source: Iowa80

Details: Tenco full trip front mounted two-way plow, and RH mid-mount wing plow. LED plow lights, 60,000 lb pintle plate, hitch and pup circuit. Remote display, joystick with pedestal mount, electric tarp with mesh cover, 30 ton 3-stage box hoist and safety prop. 1200 litre pre-wet system and alternating flashing ambers.

ID#14243

WESTERN STAR 4700SB SNOW PLOW/SANDER TRUCK MEMBER OF:

1806 2 Street, Nisku, AB, Canada T9E 0W8 brandt.ca camex.com 1-844-388-2770

RENTAL PURCHASE OPTIONS, FINANCING, AND TRADES AVAILABLE

Page 52

Supply Post · supplypost.com

October 2019

NAVISTAR

Patrick Mendenhall of Cumberland International Trucks is grand champion of the 2019 International MV Series Walk-Around Competition.

International Truck Crowns 2019 International MV Series Walk-Around Champion At Navistar World Headquarters International Truck has announced Patrick Mendenhall of Cumberland International Trucks in Nashville, Tennessee

as the grand champion of the 2019 International MV Series Walk-Around Competition. Mendenhall was one of six regional

winners that competed recently in Lisle, Illinois in front of a panel of Navistar executives. “This competition al-

lows dealer sales professionals to demonstrate in their own unique way how the International MV Series provides an advantage,

both in uptime and total cost of ownership, over competitive medium-duty trucks.” said Mark Johnson, vice president, Marketing and expert panelist for the competition. To participate in the live competition, each sales professional was required to submit a personal video conducting a 10-minute walk-around of the International MV Series, focusing on the truck’s key productivity and safety features while explaining its benefits and making comparisons to competing trucks. Some standout features include: an advanced HVAC System, column-mounted shifter, and a redesigned cab – which is the largest in its class – that enhances views, reduces blinds spots and improves visibility. “As a sales professional, it’s always a top priority to showcase the most appropriate vehicle and options

to best suit the customer and their application,” said Mendenhall. “It’s an honor to take home this award, as it reflects the knowledge base of the entire sales team at Cumberland International Trucks and our focus on customer satisfaction.” While only one grand champion was crowned, International Truck would like to congratulate all the regional winners and their respective dealerships: • Runner up: Justin Hamilton – Diamond International Trucks (Canada) • Andy Arends – Packer City International TruckGB (North) • Andrew Hirsch – Rush Truck Center Charlotte (Central) • Carlos S. Weeber – Kyrish Truck Centers Houston (Southwest) • Phil Young – RWC International Phoenix (West). b Source: Navistar

WWW.TRUCKPROVICTORIA.COM

Ingersoll Rand SP60 Roller/Packer Unit .............................................................. $8,000 PM35528SP Crane Series 35.5 SP - EN 12999, Max. lifting moment 212,430ft/ lbs (29.4 t/m), Max Capacity at Max. Reach: 1985lbs. @ 68’ 11” (Kg 900 @ 21.00 mt), Continuous slewing. SPECIAL PRICE TO CLEAR OLD STOCK

$59,500 + Taxes.

FD45 Diesel 4.5-Ton, 10,000lbs. CT Power Counter Balance, 1104D Diesel Engine, Auto Trans., Mast Lift Height (w/back rest) 5,766mm .............................................$38,600

ALSO AVAILABLE FLPG35 Dual Fuel 3.5-Ton ............... $26,500 FB30 Electric 3-Ton .......................... $23,000 FB25 Electric 2.5-Ton ....................... $20,000 Z120R-A13 2015 Barrel Clamp...........$5,000

2008 Ford F550 65 SPD, 120 CA 14’ Deck and Lift Gate, Serial #1FDAF56P85EA15937, 383,364 km................................................... $7,950 PM16525S Crane Series 16.5S - EN 12999, Max. lifting moment 108,540ft/ lbs (15 t/m), Max. Capacity at Max. Reach: 1635lbs. @ 47”5’ (Kg 740 @ 14,45 mt), Knuckle-Boom Crane w/ Double Links, Boom Pk. w/ 15° Negative Angle. SPECIAL PRICE TO CLEAR OLD STOCK

$39,500 + Taxes.

TRUCKPRO - PM INDUSTRIES - TRACTION

MARK SALMON

Office: 250-656-1689 Fax: 250-656-1305

1-855-656-1689 | Cell: 250-889-1529

1785 Mills Road, North Saanich, BC

Sales Manager

sales@pmindustries.ca

October 2019

Supply Post · Our Readers Are Your Buyers

Women In Trucking Announces Its 2019 September Member Of The Month the bottom of the barrel,” she said. With nothing to lose, Morton decided to go after her dream. She contacted a local trucking company, only to learn she needed to be 23 years old and have two years of experience. So, she spent her younger years working as a volunteer and part-time firefighter. “I had to show my community that I was a good person. After five years, the court overturned my conviction and expunged my records. They gave me a second chance in life. I went on doing contract work and running my own business for 10 years,” Morton explained. By the age of 36, she could no longer ignore the call of the road. She attended driving school and went to work for a trucking company. She spent the next nine years driving and learning what she liked best. Knowing that she had an interest in LTL and Teamsters, she met with a YRC recruiter at the Mid-America Trucking Show. “That was the beginning of my dream WOMEN IN TRUCKING

Women In Trucking (WIT) announced Regan Morton as its 2019 September Member of the Month. Morton is a professional driver with 13 years of experience. She has been a line haul driver for YRC Freight for the past four years. Regan Shane Morton is a transgender woman. She started out in life as Shane Regan Morton, a son to parents Sam and Shirley Morton. In 2017, she came out as transgender. A year later, she changed her name and gender. Morton grew up in the trucking industry. Her dad drove for over 50 years. “When I was a child, he would take us kids with him, let us flash the lights and talk on the CB radio. Out of the four of the kids he raised, I was the one that wanted to go the most! I was driving his truck before I even had a driver’s license. I knew then what I wanted to be,” said Morton. After high school, her troubled youth caught up with her. She spent a year in jail. Once she got out, she was discharged from the National Guard. “I had to start life from

Regan Morton is a professional driver with 13 years of experience. She has been a line haul driver for YRC Freight for the past four years.

job,” she remembers. But that’s not the end of Morton’s story. Something had troubled her all her life. In 2010, she started to understand that there were other people like her. The stories she heard and what she felt on the inside woke her up to who she really was. Over the next seven years, she started to understand herself better. “In 2017, I sought out professional help and went on hormone replacement therapy. What I was doing couldn’t be hidden from my employer, so I knew I had to tell my boss,” Morton explained. “At that time, I thought my job and career was over. As I grew into the new person I was going to be, I knew that the company would have to grow with me. Fortunately, I was blessed with probably the best boss I could have had. She did everything she could for me. As I grew as a person, she worked with the company and human resources to make YRC more inclusive.” In March 2019, Morton joined WIT. “I joined Women In Trucking to support other transgender people and hopefully get more LGBTQ people into the trucking industry. Then, I found myself joining the gender diversity task force,” she said. The gender diversity task force was recently formed by WIT to better understand the needs of the LGBTQ community. WIT realizes there is a growing number of lesbian, gay, bisexual, transgender and queer professional drivers and other transportation workers. As the voice of gender diversity, the association wants to ensure they are inclusive and to create an awareness within the trucking industry. “We call ourselves the voice of gender diversity, and we’re stepping up to ensure we represent ALL of our members by including the LGBTQ community in our efforts to attract and retain both drivers and management in this traditionally maledominated industry,” said Ellen Voie, WIT president and CEO. b Source: WIT

Page 53

LOWEST PRICE!

0 0 8 5 4-807 Canada’s Largest

1-8l4 om trailers.c

Western Trail King Dealer Etnyre &

r e m m u S f o End AROUT!! CLE

.queRdr.,eWinnipeg, MB R2J 3T3 www Niakwa 1585

ers more trail d n a ll u f T ed It’s jamm e year are NOW A !! ! D E K C O h T m Pricing deals of t is OVERS Our Yard the way! The best us for Rock Botto ll are on w and ca lo e b e e S QUEREL! , 55T, 50T 0’ WIDE. 8’ 6”/9’/1 WORK READY TO NOW!

S LOWBED

DUM Y L L E B

IN STOCK D NEW (3) BRAN S. TRIAXLE ! O GO READY T

OVER STOCKED

CKS

DE STEP

COME AND GET ‘EM VERY, (2) RECO G IN (2) SLID L, AL AXLES, C O LOTS F STOCK!

AXL G N I L AVE

ORS RIBUT

OIL DI

TRIDEM, , M E D N TA MINUM ALL ALU TEEL ./S OR ALUM O COMB W! CALL NO

2019 TH KENWOR IL T370 O UTOR DISTRIB LE B 2 AVAILA

GOTTA GO

Supply Post · supplypost.com

BELAZ

Page 54

The dumpers of these series were the first 90-ton trucks with electromechanical transmission.

New 90-Ton OJSC “BELAZ” Mining Dump Truck The family of BELAZ branded mining dump trucks of the 7558 series has replenished with the new BELAZ-7558F model. The dumpers of these series were marked in the history of mining equipment as the first 90-ton trucks with electromechan-

ical transmission. 90-ton BELAZ dump trucks with electromechanical transmission rapidly broke into the mining market and quickly gained popularity thanks to a combination of innovative technical solutions, good consumer characteristics

and reasonable prices. The miners repeatedly note the reliable and hightorque performance of the 90-ton BELAZ dump trucks with electromechanical transmission: on ascents with a slope of up to 20%, the electric engines allow the entire transmission to

operate without slipping, and on descents, electrodynamical braking in the generator mode provides wheels anti-skidding. Now NELAZ-7558F which will replenish the 7558-series of BELAZ dump trucks is being tested at the testing ground of the plant. The dump truck is equipped with Cummins QST 30-C engine with the capacity of 1,200 HP and General Electric AC transmission of new generation that provides optimal traction on slopes during

October 2019 operation and enables the functions of anti-slip and traction control systems, the systems of speed stabilization on descents, automatic speed limitation during the operation. Serious loads applied on the vehicle during transportation are compensated by a reliable dump truck frame elaborated with the use of cast elements in areas of the highest stresses. High reliability of the truck load-bearing elements (frame, drive axle, front axle) is ensured by up-to-date design solutions proven by calculations at all design stages and postproduction tests. The modern cabin interior is designed for comfortable work of the driver and ensures effective control of the truck. Low noise level inside the cabin is achieved by means of application of improved lining and insulation materials. The driver’s working place is designed taking into account modern requirements for safety, ergonomics and orthopedics, which, combined with high smoothness of the truck, reduces driver’s fatigue during his work. The climate in the cabin is controlled by an air-condi-

tioning unit used for heating in winter and cooling in summer. An informational LCD screen displaying basic operational data provides the functionality and ease of control of the dump truck. The World’s Biggest Mining Dump Trucks Mining trucks keep on getting bigger and bigger, as miners increasingly opt for huge capacity trucks with greater operational efficiency. Recently launched, the Belaz 75710 is by far the world’s biggest dump truck, with the capacity to haul a staggering 496t of payload. Miningtechnology.com profiles the world’s biggest mining dump trucks, based on their payload capacity. Belaz 75710, with a payload capacity of 496t, is the biggest mining dump truck in the world. The ultra-heavy dump truck was launched by the Belarusian Company Belaz in October 2013 under an order from a Russian mining company. Sales of Belaz 75710 trucks were scheduled to start in 2014. The truck is 20.6m-long, 8.16m-high and 9.87mContinued on page 58

BUILT IN CANADA MADE FOR CANADIANS UNMATCHED EXCELLENCE SINCE 1944

  

EXPERIENCE AND KNOWLEDGE OF FORESTRY & HEAVY HAUL YOU CAN DEPEND ON ! IN STOCK TRAILERS - CALL FOR DETAILS FULL LINE OF PARTS AVAILABLE

TOLL FREE: 866-657-2662

CHECK OUT OUR NEW WEBSITE!

www.peerless.ca | info@peerless.ca

October 2019

Supply Post · Our Readers Are Your Buyers

Page 55

1-855-646-6993

“YourTransportTrailer Superstore!” Prices offered while quantities last IN until Oct 31st. STOCK *O.A.C. plus taxes and license4 and 5 axle Full Galvanized Flatbeds-1262768

$59,500 Quad and Tri Axle Live-Bottoms -1276667

IN STOCK

$49,500

$89,500

Hopper Dump & B Train Hopper Dump. All Berg’s Trailers Come with Triaxle Our exclusive Rock Guard Weatherproofi ng! IN STOCK

53’ Equipment Trailer w/ Air Ramps on 17.5 Tires IN STOCK

Aluminum Pony Pups -1276669

5 Axle B Trains 28/32 Full Galvanized

-1262768

IN STOCK

Full Galvanized Flats & Drops All TandemIN and Tridem Drops Axle Configurations STOCK and Flats-83558

Tandem/Tridem/Quad & 5 Axle IN Live Bottoms Quad Axle IN STOCK STOCK

45’ Dump Trailers

-1276669

Walking Floors Tandem/Tridem/Quad IN STOCK 53’ Dry Vans

-1276668

NEW HYUNDAI REEFERS 2

AVAILABLE

2017 Wilson Combo

53’ RAS,17.5 tires, 2 boxes, dunnage carrier, alum. out steel in wheels, strobes, wide load lights, sliding winches, 2 load levellers. -1276659

Tandem & Tridem IN STOCK

2013 Mac

53’ Tridem drop, 60” spreads, 22.5 tires, all alum. wheels, wide load lights, sliding winches, ramp kit.

-1276661

2013 48’ MaxMiser Flats

Front slide 10’1” open 60” closed, 22.5 tires, all alum. wheels, 12” crossmembers, coil package, sliding winches. -1276664

Drops & Flats All Axle Configurations IN STOCK

2013 Reitnouer 48' DropMiser

Front slide, 10’1” open 60” closed, all alum. wheels, wide load lights, strobes, 22.5 tires, 12” crossmembers. -1276666

Tandem & Tridem Dry Vans IN STOCK

VISIT TRANSEASTTRAILERS.COM USED TRAILERS IN STOCK 2011 2016 2019 2017 2017 2014 2018

XL MFG 70 Double Drop - 22.5 tires, 29’ in the well, swing-out outriggers Trailmobile 53’ Tandem Dry Vans 2 Available - Barn doors. Aluminum roof and wheels Thruway 50’ 5 Axle 2 Available - Full galvanized flats Live Bottom Triaxle - Aluminum wheels, asphalt belt, electric tarp Live Bottom Quad - Aluminum wheels, asphalt belt, electric tarp Lodeking 53’ Tandem Flatbeds 4 Available - Sliding winches, tool box, disc brakes, steel wheels Reitnouer 53’ Tridem Drop 2 Available - 22.5 tires, wide-load lights, strobes, toll boxes, aluminum wheels.

View All Our New & Used Inventory at TRANSEASTTRAILERS.COM

Page 56

Supply Post · supplypost.com

CEO Ellen Voie Named Cinderella To CEO Of The Year Women In Trucking Association (WIT) President and CEO Ellen Voie was named the 2019 Cinderella to CEO of the Year, along with winning her award category, “Climbing the Beanstalk” for cultivating an innovative improvement to the workplace to

create inroads for women to achieve career goals and enhanced work-life balance opportunities for all genders. The Cinderella to CEO Awards recognize women who have overcome obstacles to change businesses, communities and indus-

tries for the better. The inaugural awards, inspired by the book From Cinderella to CEO, How to Master the 10 Lessons of Fairy Tales to Transform Your Work Life by Cary Broussard, occurred Thursday, August 8 at the JW Marriott Essex House, honoring

200 women across industries and communities who were nominated for the awards. “Our goal is to accelerate the successes of women who have worked hard and helped others to also succeed by connecting them to opportunities and each other,” said Cary Broussard, CEO of Broussard Global. “In 2030, women in the U.S. are expected to control 75 percent of the wealth in this country. We want the wealth to be in the good, caring hands of those who strive to make the world a

1015 Great St. Prince George, BC V2N 2K8 Dwayne Renshaw 250-612-7512

Byron Roberts 250-640-9599

1015 Great Street, Prince George, BC, V2N 2K8

2016 FREIGHTLINER 122SD TRI-DRIVES, Good selection of used tri-drives. These two have a Cummins ISX15 - 550, RTLO18918B, 16K FA, 69K RA, 4.10 ratio, Airliner suspension. Balance of extended powertrain warranty up to May 2021.

2020 K-LINE 55T LOWBED, 10’ wide x 24’ well, hydraulic neck with ﬂip extension, square back with pin joint rear end, enclosed Honda power unit, swing-out outriggers.

2019 FREIGHTLINER 108SD, Cummins 370hp, Allison 3000RDS, 12’6” dump body, 11’ sander, 10’ reversing plow, underbody scraper. In stock and ready to work.

2020 DOEPKER B-TRAIN LOGGERS, StrongArm 9’6” bunks, 11R24.5 tires on aluminum wheels, lift axle on lead trailer, rubber fenders on the neck of the lead.

2007 M2 EXTENDED CAB SERVICE TRUCK, MBE 330, Allison 3000RDS, 14’ Brutus service body, Fassi F175 knuckle boom crane, low km’s.

2020 FREIGHTLNER 114SD TANDEM, DD13 - 505/1850, Allison 4500RDS, 20K FA, 46K RA, Airliner suspension, 24” front frame extension, nice snow & ice spec chassis.

MAHINDRA 85P, fully enclosed cab, 4100 lb loader lift cap., 5500 lb 3 point hitch lift cap., common rail diesel fuel injection eng. w/ NO diesel particulate ﬁlter or DEF. 5 year powertrain warranty.

TRAILERS

1-800-595-4411

www.premiumtruck.ca

250-563-0696

October 2019 better place.” Nine category winners, including Voie, were recognized by a distinguished Cinderella to CEO panel of judges for their support of other women, their transformational ability to overcome obstacles and barriers, and their desire to motivate others to accomplish their dreams. Each award category is tied to a chapter in Broussard’s book. “I am so honored to receive the very first Cinderella to CEO award, as there were hundreds of nominations featuring some amazing women who have done truly notable and altruistic projects,” said Voie. “I am especially thrilled to be recognized by an organization outside the trucking

industry, which makes the award even more special.” Prizes were provided by Carnival Cruise Line, 2020 Women on Boards, KPMG PGA golf clinics, The George Washington University Center for Excellence in Public Leadership, Broussard Global and the Cinderella to CEO “WAND” ambassadors. b Source: WIT

CTA Applauds Federal Investment In Port of Montreal The Honourable Marc Garneau, Minister of Transport, Rachel Bendayan, Member of Parliament for Outremont, and Sylvie Vachon, president of the Port of Montreal, recently announced an important investment of $37 million to increase transport efficiency, capacity, and security by reducing waiting times and bottlenecks for container movements at the Port of Montréal. The contributing investment will be split 50/50 between the port and the government. “Close to 1.7 million containers transited through the port’s container terminals in 2018, an increase of 9 percent compared to 2017. The trucking industry appreciates Minister Garneau’s announcement as it recognizes the expanding economic importance of the Port of Montreal and the role the trucking industry plays in the Port’s success,” said Patrick Turcotte, CTA Board member and the recent past Chairperson of the Quebec Trucking Association. The Government of Canada funding will ad-

dress the following projects: • (i) An IT system for truck logistics that allows drivers to pre-register for the port’s terminals, thus increasing the flow of traffic; • (ii) Building a railway bridge outside the truck entrance to improve truck traffic at the port; deploying a series of electronic signs on the port lands that will provide real-time information for truck drivers; • (iii) Developing an intelligent communications network to reduce truck traffic in the vicinity of the port. “The trucking industry is facing a critical shortage of drivers. Today’s investment will ensure that our vehicles operating in the Port of Montreal are maximizing their allowable driving hours in a productive way,” added Turcotte. “An efficient port process could lead to greater economic growth in the area and perhaps less trucks needed to serve the Port despite economic expansion, which is a win for the industry, the economy and the environment.” b Source: CTA

October 2019

Supply Post · Our Readers Are Your Buyers

Mack Defense Partners With Crysteel Manufacturing On U.S. Army Heavy Dump Truck Mack Defense is partnering with Crysteel Manufacturing on the U.S. Army M917A3 Heavy Dump Truck (HDT) contract to provide specialized dump bodies that provide several key safety and functionality features to meet

the specialized needs of the U.S. Army. “We needed partners that could engineer and build components tough enough to pair with the Mack Defense M917A3 and meet the U.S. Army’s demanding applications,” said David

Sennebogen Tree Care Machines Head Off-Road Building on the tree care industry’s reception of the 718 M handler, Sennebogen has introduced the 718 R-HD, a track mounted model of the same purpose-built machine. The 718 R-HD delivers all the popular features of the 718 M, trading in the rubber tired undercarriage for crawler tracks. The track mount opens a wider range of applications and business opportunities for tree care specialists, with increased soft soil mobility and greater stability on slopes or uneven terrain. Both models feature a boom and stick with a 43 ft. (13 m) reach, fitted with a rotating hydraulic grapple saw. Operators are able to grip, cut, trim, sort and stack tree limbs from the safety of the machine’s elevating Maxcab, which can rise to an eye-level height of 18 ft. (5.5 m) to afford a clear view of the work area and the surrounding jobsite. The cab can also tilt back 30° to allow operators a comfortable up-look when working with trees that could be up to 70 ft. (21.3 m) tall. Current owners call the 718 “a game changer” in the industry, achieving production rates up to 10 times greater than traditional methods, while dramatically increasing safety for operators and ground crew. Production and versatility While the 718 M excels at urban and roadside tree care, and can quickly

transport itself between jobsites, the 718 R-HD turns its focus to off-road applications such as rightof-way maintenance for utility companies, or land clearing for construction developments. The compact size of the 718 R-HD, weighing under 44,000 lbs. (19,958 kg), is convenient for trailering to jobsites, with no highway waivers required. With its cutting and handling capability, the 718 eliminates tree climbing from the job as well as any need to rig ropes to the trees or to haul cut limbs to a sorting area. There’s no concern about branches or equipment falling on crew members below. With a 3,700 lbs. (1,700 kg) lifting capacity at maximum horizontal reach, 43 ft. (13 m) and 12,000 lbs. at maximum vertical reach, 48 ft. (14.6 m), the 718 can cut and move the wood in larger sizes as well, allowing faster removal. The grapple saw can even, if wanted, cut branches and feed them into a chipper in a single motion. The Sennebogen 718 R-HD has an auxiliary hydraulic piston pump, independent of the main hydraulics, to provide dedicated power to other attachments with high oil flow demand. Operators can switch out the grapple saw and run a hydraulic mower or mulcher head at maximum efficiency. b Source: Sennebogen

Hartzell, president, Mack Defense. “Crysteel Manufacturing fits the bill, thanks to their decades of leadership in their industry, and we’re proud to have them as a partner on this project.” Developed in close collaboration with Mack

Defense, the Crysteel dump body for the M917A3 provides maximum durability, safety and functionality in the field. Crysteel engineers developed an integrated touchscreen control module, which gives the operator key safety and functionality information at their fingertips. From this integrated hub, the driver is able to control the hoist, tailgate, tarp, thermostatic body heater system, material control system, the inclinometer and the

Page 57 on-board weigh scale. “Developing the dump body for the M917A3 Heavy Dump Truck for our country’s military is a project Crysteel is proud to be a part of,” said Brett Hart, general manager, Crysteel Manufacturing. “Our team has worked with Mack Defense to bring the highest level of innovation in durability, safety and functionality in order to develop a dump truck that supports and exceeds the U.S. Army’s requirements.”

The Mack Defense M917A3 HDT is based on the commercial Mack Granite model and has been optimized to meet the current needs of the U.S. Army. Mack Defense added heavier-duty rear axles, all-wheel drive, increased suspension ride height and other rugged features to ensure the M917A3 is capable of meeting the demanding payload and mobility requirements set by the U.S. Army HDT program. b Source: Mack

#5-1340 Stevens Road, West Kelowna, BC V1Z 1G2 Cody Fortin 250-869-9448

1015 Great Street, Prince George, BC, V2N 2K8

STK# 30116A

2019 FREIGHTLINER NEW CASCADIA, Detroit DD15, 505 HP, DT-12 Trans, 12,500 FA, 40K RA w/Lockers, Airliner Susp, 229” WB, 3.08 Ratio, 72” Mid Roof. Bendix TPMS, Espar eng. htr, many more options! P.O.R.

STK# 30065A

2018 MITSUBISHI FUSO FE-180 with Knapheide Landscaper Body, c/w Scissor Hoist, Tow Hitch, Pull Tarp System. Inquire Today! P.O.R.

STK# KS459

2011 FREIGHTLINER CASCADIA, Detroit DD15, 455 Hp, 13 Spd Trans, 13,300 Fronts, 40,000 Rears, 3.73 Ratio, Clean Truck Ready To Work. P.O.R.

STK# 30127A

NEW FUSO FE160, Gas, 15,995 lb GVWR, New Collins 16' Box, V8 6.0L Gas Engine, Allison 1000 Transmission. P.O.R.

STK# KS455

2015 FREIGHTLINER 122SD, Cummins ISX, 550 HP, RTLO20918B trans, 20,000 Front Axle, 46,000 Rears Axle with Lockers, 4.56, Brand new Armstrong Box. Approx Tare : 11,810Kg. P.O.R.

STK# KS464

2015 FREIGHTLINER 122SD 13.2 Front/40 Rears, 244 Wheelbase, Ultra Shift Transmission, Clean Truck, Ready To Go To Work! P.O.R.

STK# 30022A

2020 FREIGHTLINER 122SD, Detroit DD16 560 HP, 1850 18 Speed Trans., 13,300 Front, 46,000 Rears. P.O.R.

STK# KS465

2006 FREIGHTLINER M2112, MBE Engine, Eaton 18 Speed, 20 Front 46 Rears. 16 Foot Collins Box, pre wired and plumbed! Hiab Crane mounted on rear. P.O.R.

STK# 30122T

2020 DOEPKER DSL30, 11R22.5 Aluminum wheels/ Black Rims, 4 Tool Boxes. P.O.R.

TRAILERS

250-769-7255 1-888-878-2511

www.premiumtruck.ca

@premiumtruckkelowna

Supply Post · supplypost.com

BELAZ

Page 58

Mining trucks keep on getting bigger and bigger, as miners increasingly opt for huge capacity trucks with greater operational efficiency. Continued from page 54

wide. The empty weight of the vehicle is 360t. Belaz 75710 features eight largesize Michelin tubeless pneumatic tyres and two 16-cylinder turbocharged diesel engines. The power output of each engine is 2,300HP. The vehicle uses an electromechanical transmission powered by alternating current. The

top speed of the truck is 64km/h. Caterpillar 797F, the latest model of 797 class dump trucks manufactured and developed by Caterpillar, is the second-biggest mining dump truck in the world. The truck has been in service since 2009. It can carry 400t of payload compared to its predecessor models 797B and the first

generation 797, with payload capacities of 380t and 360t respectively. The dump truck has a gross operating weight of 687.5t and measures 14.8m in length, 6.52m in height and 9.75m in width. It is equipped with six Michelin XDR or Bridgestone VRDP radial tyres and Cat C175-20 four-stroke turbocharged diesel engine. The

NEW LOCATION: 4600 Collier Place, Williams Lake, BC V2G 5E9

Eli Bergen: 250-267-8054

e.bergen@ premiumtruck.ca

Call for Pricing 2015 PETERBILT 367 TRI-DRIVE, ISX 15 - 550/2050, RTLO-20918B, 22K FA, 69K RA with Air Trac suspension and 4.10 ratio, logger cab guard, chain hanger and fenders.

Call for Pricing 2020 K-LINE 55T LOWBED, 10’ wide x 21-1/2’ well, hyd. neck compatible for tri-drive w/ﬂip ext, encl Honda power unit, beavertail rear end with boomstand, plumbed for booster…sold separately.

250-398-7411 | 1-877-878-2516

single block, 20-cylinder engine offers a gross power output of up to 4,00HP. The truck uses a hydraulic torque converter transmission and runs at a top speed of 68km/h. Komatsu 980E-4, introduced by Komatsu American Corporation in September 2016, has a payload capacity of 400t. It is the biggest electric drive rear dump truck from Komatsu. Fitted with big bucket shovels with a capacity of up to 76m3, the Komatsu 980E-4 is suitable for largescale mining operations. The gross operating weight of the truck is 625t while its loading height and the width are 7.09m and 10.01m, respectively. The vehicle is powered by a four-cycle diesel-fired 3,500HP Komatsu SSDA18V170 engine with 18 V-type cylinders. It uses GE dual insulated-gate bipolar transistor IGBT) AC electric drive system and can run at speeds of up to 61km/h. Terex MT 6300AC, introduced by the American

October 2019 manufacturer Terex in 2008, is also an ultra-class mining dump truck with a payload capacity of 400t. The vehicle was rebranded as Bucyrus MT6300AC, following the acquisition of the mining equipment division of Terex by Bucyrus in 2010. Terex MT 6300AC became a part of Caterpillar’s Unit Rig line after Caterpillar’s acquisition of Bucyrus in 2011. The gross operating weight of the vehicle is 660t. The body of the truck is 7.92m in height and 14.63m in length. The vehicle is equipped with a four-stroke diesel engine, with 20 cylinders powering an AC electric alternator, which in turn supplies power to the electric motor fitted at each side of the rear axle. The rated power output of the engine is 3,750HP. The vehicle can move at a maximum speed of 64km/h. Liebherr T 282C and Liebherr T 284 are two 400t payload capacity ultra-class haul trucks designed and manufactured by Liebherr. The trucks share the distinction of being the second biggest mining trucks with Caterpillar 797F and Terex MT 6300AC. Liebherr’s T 282C is the successor to the 360t capacity T 282B class mining truck. T 284, the latest class of trucks from Liebherr, shares many similar features with the T 282C. The gross weight of T 282C and T 284 is the same, at 661t. The overall length of the trucks is 15.69m. The overall width and the loading height are 9.679m and 7.42m respectively. The vehicles are equipped with a 20-cylinder diesel engine with a gross power output of up to 3,750HP. The vehicles use the Liebherr IGBT AC electric drive system. The

Tigercat Factory Support For Western Canada Call for Pricing

MAHINDRA 105 105 hp, 4 cylinder diesel, 24F/24R plus 8 creepers, 6860 lb. 3 point hitch lift capacity, 4129 lb. loader lift. Demo Price $76,000.00

2014 DOEPKER SUPER B LOGGERS, 2 bundles of 9'6" bunks, 1 bundles of 8'6", 11R24.5 tires on aluminum wheels, lift axles on lead trailer.

TRAILERS

www.premiumtruck.ca

Tigercat is pleased to announce that Jochen Reiter has been appointed to the position of factory support representative for western Canada. Based in Quesnel, British Columbia, Jochen moved to Canada in 2007 from Germany, where he grew up logging with his grandfather and uncle. Jochen is a certified faller

maximum travel speed of the vehicles is 64km/h. Belaz 75601 has the capacity to haul 396t of payload. It is the latest model of 7560 class of trucks designed by Belaz for carrying loosened rocks at deep open-pit mining sites under different climatic conditions. The gross operating weight of the vehicle is 672.4t. The Belaz 75601 measures 14.9m in length, 9.25m in width and 7.22m in height. The dump truck uses electromechanical transmission with a fourcycle diesel engine, having 20 V-type cylinders. The engine’s power output is 3,750HP. The traction motors and the traction alternator are provided by Siemens and Kato respectively. The top speed of Belaz 75601 is 64km/h. Komatsu 960E-1 and Komatsu 960E-1K are the two latest rigid dump trucks by Komatsu. Each truck has a payload capacity of 360t. The 960-E1, introduced in 2008, is the first generation of the 960E series of haul trucks from Komatsu, which was followed by Komatsu 960E-1K. The gross weight of both trucks is 635t. The loading height and width are 7.14m and 9.19m respectively. The overall lengths of Komatsu 960E-1 and Komatsu 960E-1K are 15.6m and 15.34m respectively. Both vehicles are powered by a four-cycle diesel engine with 18 Vtype cylinders. The power output of the engine is 3,500HP. Komatsu 960E-1 uses GE dual IGBT AC electric drive system, whereas the 960E-1K uses Komatsu IGBT AC electric drive system. The top speed of both trucks is 64km/h. Terex MT 5500AC, also known as the Unit Rig MT 5500AC, ranks as one of Continued on page 59

We continue to have many new opportunities and applications for Tigercat machines in the west. Having a top-notch support team is critical,” explains Rob Selby, Tigercat district manager, also based in British Columbia. “I am excited to work for the best,” says Jochen. “I am excited to work for a company with great leadership, an inspiring culture, and first-class customer support.” b

supervisor and a Red Seal technician. He has 21 years experience in many aspects of the industry including operating and supervising conventional ground-based and yarding operations. “Along with Kushiah McCullough, Damien Donoher and Mark Tourand, I am very excited to add Jochen to the western product support team. Source: Tigercat

October 2019

Supply Post · Our Readers Are Your Buyers

AGCO Invests Significantly In Fendt N.A. And Doubles Fendt Dealership Locations AGCO Corporation, a worldwide manufacturer and distributor of agricultural equipment and solutions, continues to invest significantly in Fendt North America by doubling Fendt dealer locations in the past year while introducing a row crop-friendly tractor and the Momentum planter. With the launch of the revolutionary Fendt Ideal combine in 2018, and the introduction of the redesigned, new row cropfriendly Fendt 900 Gen6 series of tractors, AGCO is positioning the Fendt brand as the premium brand of choice for North American farmers and producers. Not only has the Fendt product offering in North America expanded, but so too has the dealer network. Fendt Dealer Network Expansion – By the Numbers North America now has a total of 189 Fendt dealership locations. Of that total, 98 are new locations that have joined the Fendt family just in the past year. Special emphasis was put on placing new Fendt dealerships in areas to best serve prospective customers and existing Fendt owners. Fendt dealerships are now in 37 of the 54 U.S. states and Canadian provinces that are considered large ag markets, or 69 percent of all large ag markets. “The Fendt dealership expansion is a clear sign of our continued commitment not only to growth in North America, but to an expanded group of customers who, when they learn why Fendt has such a dedicated fan base, will also want to be Fendt owners,” says Bob Crain, senior vice president and general manager, Americas, AGCO. Fendt Product Offerings Fendt tractors have been sold in North America since 1998, and 2019 is the launch of the newly redesigned Fendt 900 tractor series. The five new Fendt Gen 6 models are allaround workhorses built upon Fendt’s 90 years of engineering innovation and manufacturing excellence. The 900 Series tractors are designed specifically to meet the needs of pro-

ducers in North America and range from 296 to 415 HP. They feature many of the cutting-edge technologies first introduced on the Fendt 1000 Series in agile, crop-friendly machines that will handle any task a crop producer, large-scale cattle operation or custom farming operation faces. “We are aggressively addressing the row crop segment in North America, which is very important because nearly 75 percent of North American farmers have row crop conditions,” says Crain. The Fendt Ideal combine, the first clean-sheet design for a combine in the ag industry in over 30 years, launched in 2018, was the next Fendt product to take North America by storm. Setting a new standard for harvesting automation, and blending Fendt’s tradition of engineering innovation with the most advanced operating technology, the Ideal combine delivers what producers around the world told AGCO they want in a combine – in-field efficiency, unfailing uptime, totally simple operation, and better grain quality. And launching in February 2020, the revolutionary Fendt Momentum planter – a global planter platform designed from the ground up for producers across the globe. First debuted in Brazil, and currently undergoing extensive field trials in North America, the Momentum planter will change the way farmers think about planting. With the AGCO acquisition of Precision Planting two years ago, the Momentum planter features the latest, exclusive Precision Planting technologies. Each North American Fendt product is backed by Fendt Gold Star Customer Care, assuring more value and more uptime. This industry-best warranty, with no deductible, for 36 months or 3,000 hours for tractors, and 36 months or 1,200 hours for Ideal, covers all scheduled maintenance, including the cost of oil, filters, belts and maintenance items during this time. Fendt dealers provide

Page 59

innovations include: The Dieselross F18, introduced in 1937, featured a travel-independent power-shift PTO, which meant the PTO didn’t stop when the operator stopped the tractor. In 1980, Fendt introduced the 300 Farmer Series, the first tractor with a four-wheel braking system and a transport speed of 25 mph (40 km/h). All-wheel braking not only increases transport safety, but provides greater stopping power when transporting heavy loads, such as a manure tanker. Fendt premiered the world’s first high horsepower tractor with a continuously variable transmission (CVT) stepless transmission, the 926 Vario, at Germany’s 1995 Agritechnica show. The Fendt Vario, as it was named, allows the operator to utilize the power reserves normally hidden in the areas between gears and select the perfect speed for every application. The Fendt 800 and 900 Vario tractors also introduced VarioGrip, the industry’s first integrated tire pressure regulation system that is adjusted from the cab. The benefits include less tire wear, lower rolling resistance, lower fuel costs, greater stability in the field and on the road, as well as the ability to minimize compaction in the field. b

industry-leading parts support and if a crucial part isn’t available from the dealer, it will be shipped via the fastest option from the nearest AGCO Parts Distribution Center or the factory. Highly trained technicians use the latest technology to quickly diagnose problems at the farm or the shop to save Fendt owners time and money through reduced downtime and lower service fees. Fendt – History of Quality and Innovation Since its beginning more than 90 years ago, Fendt has combined craftsmanship with engineering while listening to their customers and solving their problems without sacrificing quality or reliably. Fendt products today reflect that history of innovation and problem solving. They bring producers around the globe an expanding list of new technologies driving fuel efficiency, easeof-use, comfort and reduced cost per acre. Though Fendt established technology leadership in the mid-1990s by introducing the continuously variable transmission (CVT), few are familiar with the array of innovations Fendt has developed through the years. These Source: AGCO

Continued from page 58

the biggest mining dump trucks in the world. The 360t payload capacity vehicle is used for high volume surface mining. The maximum gross vehicle weight of Terex MT 5500AC is 598t. The overall length is 14.87m while the width and loading height are 9.05m and 7.67m respectively. The vehicle is powered by a four-stroke Diesel engine rated at 3,000HP with 16 cylinders. The vehicle uses an AC electric drive system and travels at a maximum speed of 64km/h. Belaz 75600 is currently one of the largest mining dump trucks in the world. It is the first generation model of Belaz’s 7560 class mining trucks designed for transporting rock-mass at deep open-pit mines under different climate conditions. The haul truck offers a payload capacity of 352t. The maximum gross weight of Belaz 75600 is 617t. The overall length, width and loading height are 14.9m, 9.6m and 7.47m respectively. The vehicle is powered by a four-cycle turbocharged diesel engine with 18 V-type cylinders. The gross power output of the engine is 3,500HP. The traction alternator for the vehicle is provided by Kato and the traction motors are provided by Siemens. The maximum travel speed of the truck is 64km/h. Caterpillar 795F AC has a payload capacity of 345t.

The haul-truck features a modular design and offers two body options, including the popular MSD (mine specific design) and the gateless coal body. The gross machine operating weight of Caterpillar 795F AC is 628t. The truck’s overall length is 15.14m. The overall width and the loading height are 8.97m and 7.04m respectively. The vehicle is powered by Cat C175-16 diesel engine with a gross generating capacity of 3,400HP. The truck uses an AC electric drive system solely designed and developed by Caterpillar and runs at a top speed of 64km/h. The Hitachi EH5000AC-3 has a payload capacity of 326t. It is Hitachi’s latest and largest rigid frame dump truck and was introduced at MINExpo International 2012 in Las Vegas, Nevada, in 2012. The gross machine operating weight of Hitachi EH5000AC-3 is 551t. The overall length of the truck is 15.51m. The width and loading heights are 8.6m and 7.41m respectively. The truck uses the lowemission Cummins QSKTTA60-CE diesel engine with 16 cylinders. The rated power output of the fourcycle engine is 2,850HP. The vehicle uses Hitachi’s IGBT AC electric drive system and runs at speeds of up to 56km/h. b Source: Belaz & Mining Technology

OFFERING A FULL LINE OF TRAILERS TO SUIT YOUR NEEDS!

Let K-Line quote your next trailer! Call us Toll Free: 1-888-880-5544 #klinetrailers

www.klinetrailers.com

Supply Post · supplypost.com

October 2019

DAIMLER

Page 60

Both Daimler and Torc complement each other perfectly, with Torc’s expertise in agile software development and Daimler Trucks’ experience in delivering reliable and safe truck hardware.

Daimler Trucks Establishes Global Organization For Highly Automated Driving Daimler Trucks brings together global expertise and activities for trucks with automated driving in the Autonomous Technology Group.

aimler Trucks is establishing the Autonomous Technology Group as a global organization for automated driving, bringing together its worldwide expertise and activities, as of June 1. The main tasks of the new unit comprise overall strategy and implementation of the automated driving roadmap, including research and development as well as setting up the required operations infrastructure and network, heading towards the series production of highly automated trucks (SAE level 4). The newly established

Autonomous Technology Group is part of Daimler Trucks’ global effort to put highly automated trucks onto the roads within a decade. To achieve this, Daimler Trucks announced an investment of more than EUR 500 million (more than USD 570 million) at the 2019 Consumer Electronics Show (CES) in Las Vegas. In commercial trucking, level 4 is the logical next step after level 2 to increase safety as well as efficiency and productivity. Maximizing automated driving efforts

Martin Daum, Member of the Board of Management of Daimler AG responsible for Trucks and Buses stated: “We are the pioneer for automated trucks. With the formation of our global Autonomous Technology Group, we are taking the next step, underscoring the importance of highly automated driving for Daimler Trucks, the industry, and society as well. With the new unit, we will maximize the effectiveness of our automated driving efforts and the impact of our investments in this key strategic technology. We will

therefore be in the perfect position to put highly automated driving onto the roads, making transportation safer, saving lives and helping trucking companies boost their productivity.” New dedicated executive position Effective June 1, Peter Vaughan Schmidt, who is currently Head of Strategy Daimler Trucks, will lead this new, global and crossdivisional organization. In this position, he will continue to report directly to Martin Daum. Schmidt has 15 years of experience

in the industry and in his previous position he has been responsible for the development of Daimler Trucks’ strategy on automated vehicles. Peter Vaughan Schmidt: “With the Autonomous Technology Group, we are bringing together our global experts and their vast knowledge in automated trucking. In the first stage, we will focus on use cases of highly automated driving in defined areas and between defined hubs in the U.S.A. In doing so, we will work closely together with customers whose business matches

this automated driving application. We will not only develop the respective technology but also set up the required operations infrastructure and network.” Roger Nielsen, CEO of Daimler Trucks North America LLC (DTNA), which includes the market-leading Freightliner brand: “We at DTNA are excited to have our automated driving efforts backed by the Autonomous Technology Group. This new global organization will enable us to even stronger evolve the techContinued on page 61

Supply Post · Our Readers Are Your Buyers

Page 61 DAIMLER

DAIMLER

October 2019

DAIMLER

Daimler Trucks North America’s Freightliner new Cascadia® was recently awarded the prestigious honour of “Best Transportation Technology” at the engadget annual “Best of CES” awards ceremony at the 2019 Consumer Electronics Show (CES). According to engadget, the Transportation Technology category is awarded to the best technology related to the “ever-advancing science of getting from here to there.” The truck debuted at the Las Vegas Motor Speedway recently, and is the first SAE Level 2 automated truck to enter series production in North America.

In 2014, Daimler presented the Mercedes-Benz Future Truck 2025, the world’s first automated truck, and was the first to demonstrate the technological opportunities and great potential that automated trucks offer the economy and society.

Continued from page 60

nology for highly automated driving and vehicle integration for heavy-duty trucks at our Automated Truck Research & Development Center in Portland. We’re fully committed to demonstrating the enormous advantages of highly automated driving first here in the U.S.A.” Main activities of the new unit Software development for highly automated driving will be one of the key activities of the Autono-

mous Technology Group. Another one will be the so-called vehicle project: On the one hand, the vehicle project will be responsible for the redundancy in the chassis enabling the vehicle’s systems to take over roles of a professional driver while on the road, providing the highest safety. On the other hand, the vehicle project will take care of the automated driving sensor kit integration (camera, lidar, radar), which – together with a very accurate map – is responsible for

ensuring that the highly automated truck finds its own way on the road. The operations infrastructure and network to be set up by the Autonomous Technology Group – another key activity – will consist of one main vehicle control center as well as additional stations at logistics hubs. New unit with global reach to include Torc Robotics The Autonomous Technology Group has a global reach with experts working in various locations

throughout the company’s worldwide development network, i.e. in Portland and Blacksburg (U.S.A.) and Stuttgart (Germany). More locations will follow as the test fleet is built up and deployed. The Blacksburg-based company Torc Robotics will be part of the newly established Autonomous Technology Group, pending the authorities’ approval of the acquisition recently announced by Daimler Trucks. Both companies complement each other perfectly, with Torc’s expertise in agile

Unlike systems that only work above a certain speed, Active Drive Assist and Detroit Assurance 5.0 make partially automated driving possible for the driver in all speed ranges, also another first in a series-production truck, like the new Cascadia.

software development and Daimler Trucks’ experience in delivering reliable and safe truck hardware. Torc Robotics will remain a separate entity and retain its name, team, existing customers and facilities in Blacksburg. In addition, the founders of Torc Robotics will continue to be part of the company’s management team.

that automated trucks offer the economy and society. In 2015, Daimler’s Freightliner Inspiration Truck obtained the firstever road license for a partially automated commercial vehicle, and in the same year, the world premiere of the MercedesBenz Actros with Highway Pilot took place on public roads.

Synergies across Daimler including passenger cars Daimler Trucks will continue to work very closely on automated vehicle technology across Daimler, including joint activities with passenger cars, for leveraging synergies. At the same time, truck specifications require own development activities due to the entirely different nature of the system (one-box vs. articulated) and focus on highway goods transportation vs. inner-city passenger transportation.

Level 2 automated driving is already a reality at Daimler Trucks With Active Drive Assist (Mercedes-Benz Actros, FUSO Super Great) and Detroit Assurance 5.0 with Active Lane Assist (Freightliner Cascadia), Daimler Trucks is the first manufacturer to put partially automated driving features (SAE level 2) into series production. The new system can independently brake, accelerate and steer. Unlike systems that only work above a certain speed, Active Drive Assist / Detroit Assurance 5.0 make partially automated driving possible for the driver in all speed ranges, also another first in a series-production truck. This revolutionary active lateral and longitudinal assistance package features a new state-of-the art radar and camera fusion system. b

Daimler Trucks, the pioneer of automated trucks Daimler Trucks is the pioneer of truck automation. In 2014, the world’s leading truck manufacturer presented the Mercedes-Benz Future Truck 2025, the world’s first automated truck, and was the first to demonstrate the technological opportunities and great potential Source: Daimler

TRUCK PHOTO ADS Book your ad online at: supplypost.com/advertise/classifieds or call 1-800-663-4802 today! PAGE 62 · OCTOBER 2019 2014 PETERBILT 367 LNG

WWW.SUPPLYPOST.COM 2019 RAM 3500 4X4 SERVICE BODY

2019 RAM 5500 4X4 SERVICE DECK

COMING SOON – IN PRODUCTION LNG Fuel, ISX15 Cummings, 18Speed Eaton Ultra Shift, 20000 Front, 69000 Rears 46160 Rockwells 4:30 Ratio Full Lockers, 135,000 Original Kms. 267" Wheelbase. 6 Matching Units Available. Located in Wetaskiwin, AB.

DENNIS McAULEY

truxperts@live.ca · 780-387-6649 1998 KENWORTH T800

2018 RAM 5500 4X4 PICKER DECK

IN STOCK - FINANCING AVAILABLE OAC

1525KM, 2019 Crew Cab Chassis, 6.7 Cummins Turbo Diesel, 6 Spd Aisin auto, 4X4, 9ft Mechanics Service Body, VMac G30 Rotary Gas Compressor, American Eagle 8 drawer tool chest. Fleet Price $110,569 + $698 Ad min Service,+ Taxes. Stk# F-19C32926. DL# 30541 .

1525 KM, 6.7 Cummins Turbo, 6 Spd Aisin, 4X4, 11’ WTW service body, 5000 Lb EHC5 Auto Crane w/pro. controller, VMac G30 Rotary Comp., Honda pwr, remotes, AE tool chest, b/u camera. Fleet Price $155,429 + $698 Admin Service + Taxes. Stk# F-19R57037. DL#30541. *Vehicle may not be exactly as shown*

200 KM, 6.7 Cummins Turbo Diesel, 6 Spd Aisin automatic, 4x4, 551A4 Ferrari Crane, 24" Cross Box with American Eagle tool cabinet, 3" rub rail with stake pockets, goose neck drop ball. $119,995 + $698 Admin Service + Taxes. Stock# 18R51660. DL# 30541.

NORTHLAND CHRYSLER DODGE JEEP RAM

2016 KENWORTH T680

2017 KENWORTH T660

Call Murray 1-888-457-6908 www.northlanddodge.ca

YOUR AD COULD BE HERE...

Starting at $129 per truck ad N14 Engine, 18-speed transmission (newly rebuilt), 20,000lb front-axle, 46,000lb rear-axle, set up for lowbed and end-dump hauling. $20,500 CAD OBO. Hours: 27,608. Kms: 166,335. Serial #: 1NKDL60X9WR952586

Smartway Cert, moose bumper, engine/bunk heaters, bal. of wty to 804,000 km, MX13 500/1850 engine, 18 Speed manual, 13,200 front, 40,000 rears, 3.42 axle ratio. $2,599/ MONTH+GST, OAC** • No down payment! First payment due in advance.

TOM: 604-935-0798

GREATWEST KENWORTH CALGARY

or tom@coastalmountain.ca 2019 WESTERN STAR 4900 SF

Tractor, 40” Sleeper, Detroit DD16 600 Hp 1850 torque with Eaton 18 speed manual transmission. 12,000FA Super 40 RA. Great B-Train Spec. In Stock And Ready To Go To Work! See ad on page 49.

P&R TRUCK CENTRE

Ed Murray: (250) 812-2925

Call Troy direct at 403-537-2292

MX 500 Engine, 13 speed Auto, 3.42 ratio, 40K R/axle, 13.2K F/axle, 86" studio sleeper, 763,653 kms. Call for price.

GREATWEST KENWORTH CALGARY Call Troy direct at 403-537-2292

• Full colour photo ad of your new or used truck. • Exposure to 13,000+ Supply Post Readers, and 12,000+ Online Visitors. • Starting at $129 to advertise! (per individual unit). • 45 words max.

CALL SUPPLY POST TODAY! 1-800-663-4802

2019 FREIGHTLINER 108SD SNOW & ICE

Cummins 370hp, Allison 3000RDS, 12’6” dump body, 11’ sander, 10’ reversing plow, underbody scraper. Winter is around the corner! See ad on page 56.

On Newsstands Everywhere! BOOK YOUR AD TODAY CALL

PREMIUM TRUCK & TRAILER

www.premiumtruck.ca · 1-800-595-4411

1-800-663-4802

October 2019

Supply Post · Our Readers Are Your Buyers

Page 63

SEARCHING FOR PARTS?

The Completely Searchable Supply Post Parts Database Is Here!

WWW.SUPPLYPOST.COM/parts Truck Parts, Equipment Parts, And More Search By Part # Search By Keyword Locate That Part You Need Before You Pick Up The Phone!

Page 64

Supply Post · supplypost.com

October 2019

OCEAN TRAILER IS WESTERN CANADA’S TRAILER SPECIALIST. SPECIAL PEOPLE CREATING EXCEPTIONAL PLACES. Come and see us at the “AGRI TRADE SHOW” in Red Deer

NOW AVAILABLE!

Tridem Step Deck Tautliner

TITAN Super B Grain!

Wilson Quad Flats

Titan Super B Walking Floor Chip Hauler

Super B Flats Call For Great Pricing!

Fontaine All Aluminum Flat

Wilson Super B Curtain Sider

Wilson Tridem Step Deck *IN STOCK NOW*

Delta (800) 891-8858

Nanaimo (877) 878-5979

Prince Rupert (250) 627-1981

Edmonton (800) 610-1019

Tridem Combo Chassis - In Stock

Neustar Demo Box

New All Steel Tridem, Flats & Steps.

Calgary (877) 720-7171

WWW.OCEANTRAILER.COM

Winnipeg (866) 397-5524

Celebrating 31 Years! 1988-2019 ENGINES FOR SALE

Forax Equipment’s innovative brush cutter designs are based on more than 20 years of experience in the forestry industry. They are focused on designing and producing uncomplicated and dependable brush cutting heads for excavators and arms and heads for road graders, as well as for snowmobile groomers.

TRANSMISSIONS FOR SALE

JD & CUMMINS — Call for info

Kits Avail

able

VOLVO 11 Spd. Transmission rebuilt, in-stock, call to order.

JOHN DEERE Transmission rebuilt, in-stock, call to order.

WHOLE MACHINES FOR SALE 2007 VOLVO G970 STK#E003385 Rops: Enclosed; Volvo D9B Diesel Engine (210 - 250 Hp) Volvo HTE1160 Transmission, Low Profile Cab c/w Air Conditioning, 14’ Moldboard, Accumulators, Float Valves, 20.5x25 Tires $112,800 PLUS ATTACHMENTS 2010 VOLVO G940 STK#E001968 Volvo D7 (175, 195, 215 Hp) Diesel Engine, 11 Speed Transmission, 14’ Moldboard, 17.5x25 Tires, $98,900 PLUS ATTACHMENTS

TIRES FOR SALE

JD RIMS, 17.5 x 25 SnoPlus tires. Set of 4 available. CALL FOR DETAILS

10807 - 209 Street, Edmonton, AB T5S 1Z7

Toll Free: 1-800-663-0715 • Tel: 780-452-7021 • Fax: 780-453-1477

47 Forest Plain• Volvo Road,Graders Oro-Medonte, L3V 0R4 Your Source for Champion Graders • VolvoONLoaders

Toll Free: 1-866-404-5233 • Tel: 705-325-2777 • Fax: 705-325-9777